Abstract Plant diseases substantially reduce global crop yields, and cotton production is particularly vulnerable to field-acquired variability in symptom appearance, background clutter, and illumination changes that limit the reliability and scalability of expert visual inspection. This study aimed to develop an accurate, computationally efficient, and explainable framework for real-time cotton leaf disease recognition that is suitable for deployment on resource-constrained edge devices. Using the SAR-CLD-2024 dataset (322 RGB images captured under natural agricultural conditions across seven categories, including healthy and diseased leaves), images were preprocessed via resizing and normalization and augmented online in the training set (random rotations, flips, brightness/contrast adjustments, and random cropping). An EfficientNet-B3 backbone initialized with ImageNet-pretrained weights was fine-tuned using categorical cross-entropy loss and Adam optimization, with early stopping, checkpointing, regularization, and a fixed-seed 70/15/15 train–validation–test partition to enhance reproducibility and reduce leakage. Performance was evaluated on an independent test set using accuracy, precision, recall, F1-score, MCC, balanced accuracy, Cohen’s kappa, confusion matrix, multi-class ROC/AUC, and precision–recall analysis, alongside computational benchmarking (parameters, FLOPs, memory, and inference latency) and comparative experiments against contemporary CNN, lightweight, and transformer-based models. The model showed stable convergence over 30 epochs with a small training–validation gap, predominantly correct predictions with limited confusion among visually similar classes, consistently high precision–recall behavior under moderate class imbalance, and stable performance across repeated runs with low variability and a tight confidence interval. Grad-CAM heatmaps localized necrotic lesions, discoloration, and infected tissues while largely ignoring background, and failure cases were associated with early-stage symptoms, occlusion, shadows, and inter-class similarity. Overall, the framework provides a reproducible, interpretable, and efficient solution for cotton leaf disease classification with practical implications for trustworthy, low-latency, on-device decision support in precision agriculture.
Why it matches plant phenotyping methods綿葉の病徴を画像から分類する深層学習手法の開発が中心で、独立テスト、比較評価、計算性能評価、Grad-CAMによる病徴局在化を実施しているため、植物病害フェノタイピング手法に該当する。
abstractThis study aimed to develop an accurate, computationally efficient, and explainable framework for real-time cotton leaf disease recognition
Reproduction assets foundThe paper's Data Availability statement explicitly names the SAR-CLD-2024 cotton leaf dataset used for all experiments as publicly available on Kaggle with a direct URL. No author analysis code or trained model checkpoint is deposited.Dataset · publicntribute to the development of fully automated, scalable, and real-time smart agriculture
systems.
Declaration
Funding
Datta Meghe Institute of Higher Education and Research Wardha, Maharashtra, India
Data Availability: The SAR-CLD-2024 cotton leaf dataset used in this study is publicly
available through the Kaggle platform at: https://www.kaggle.com/datasets/pantho12/sar-cld-2024-dataset-for-cotton
This dataset includes annotated images of various cotton leaf diseases collected under diverse
environmental conditions. All data utilized in this work are freely accessible, and the data
processing methodology has been described in detail to facilitate reproducibility.
Conflict of interest The aOpen asset ↗Kaggle · SAR-CLD-2024pdf-raw-page:32 lines:1-38Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Plant diseases are still posing a challenge to the productivity, quality of crops, and food security, especially in locations where field diagnosis is based on manual visual inspec-tion. This paper assesses deep learning network-based automated classification of plant leaf diseases on public RGB leaf-image datasets, such as the Kaggle New Plant Diseases Dataset (Augmented) and PlantVillage images. They investigated four archi-tectures: EfficientNetV2B0, ResNet152V2, DenseNet201, and one hybrid Vision Trans-former (ViT)-based model. The steps of the experiment involved loading the dataset, exploratory analysis, preprocessing, resizing, normalizing, augmentation, transfer learning, independent model training, and evaluation metrics such as accuracy, preci-sion, recall, F1-score, training curves, testing results, and confusion matrices. The hy-brid ViT-based model was reported to have the best accuracy of 99.5%. On the smaller seven class subset of PlantVillage, EfficientNetV2B0 scored 98.11%. On the 38-class dataset, DenseNet201 improved test accuracy (97.34) and validation classification ac-curacy (around 98). ResNet152V2 scored 97.01 on the 38-class test set. The results demonstrate that CNN and transformer-based models can help to recognize plant diseases accurately whereas hybrid attention-based structures provide a promising path to enhance fine-grained classification. Since the model notebooks had varying class settings and splits, the comparison is seen as a model-structured assessment as opposed to a precisely identical benchmark across all architectures.
Why it matches plant phenotyping methods植物葉画像から病害状態を分類する深層学習手法を複数モデルで比較・評価しており、病害表現型の取得・抽出と技術検証が研究の中心である。
abstractThis paper assesses deep learning network-based automated classification of plant leaf diseases on public RGB leaf-image datasets
Reproduction assets foundThe paper's phenotyping inputs are two public plant leaf-image datasets explicitly named in the Data Availability statement: the Kaggle New Plant Diseases Dataset (Augmented) and the PlantVillage dataset, both with public URLs. No author code, models, or supplementary materials are deposited (supplementary materials: 'Dataset · publicy available. Plant leaf images were
obtained from the Kaggle New Plant Diseases Dataset (Augmented) and PlantVillage
datasets. The datasets contain publicly accessible RGB images of healthy and diseased
plant leaves used for supervised image classification research.
DATASET SOURCES
Kaggle New Plant Diseases Dataset (Augmented):
https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset
PlantVillage Dataset: https://plantvillage.psu.edu/All processed data, experimental configurations, and model implementation details are
described within the manuscript. Additional materials may be made available from the
corresponding author upon reasonable request.
ACKNOWLEDGMENTS
The author acknowOpen asset ↗Kaggle · new-plant-diseases-datasetpdf-raw-page:24 lines:1-23Dataset · publicgmented) and PlantVillage
datasets. The datasets contain publicly accessible RGB images of healthy and diseased
plant leaves used for supervised image classification research.
DATASET SOURCES
Kaggle New Plant Diseases Dataset (Augmented):
https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset
PlantVillage Dataset: https://plantvillage.psu.edu/All processed data, experimental configurations, and model implementation details are
described within the manuscript. Additional materials may be made available from the
corresponding author upon reasonable request.
ACKNOWLEDGMENTS
The author acknowledges Istanbul Aydin University for academic support and research
guidance duringOpen asset ↗PlantVillagepdf-raw-page:24 lines:1-23Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Precision agriculture is becoming more and more of a challenge that requires the use of intelligent systems that are able to predict stress and prevent yield loss before it is too late. Traditional methods of agricultural surveillance are predominantly reactive with irrigation demands being based on thresholds or individual yield forecasts models that do not represent the intricate spatio-temporal interactions that exist between crop physiology, soil status, and environmental stresses. Besides, the majority of the current practices do not have an autonomous decision-making approach to preventive intervention which leads to inefficient use of water and slows down the response to stress. This paper suggests a cognitive UAV-assisted agro-surveillance system to predict yield vulnerability caused by crop stress and optimize adaptive irrigation with the help of spatio-temporal deep and reinforcement learning. The framework combines UAV-obtained RGB and multispectral and thermal imagery with measurements of soil sensors and meteorological data obtained with the Crop Health and Environmental Stress Dataset. A new GeoSpatio-TRiNet model is used to acquire long-range spatial relationship, time stress development, and diffusion of stresses across agricultural regions. The model predicts the vulnerability trajectories of the stress instead of the direct yield regression, and this allows early detection of yield risk. Such predictions serve to generate a cognitive environmental state of a Soft ActorCritic (SAC) reinforcement learning agent that autonomously computes zone-based irrigation behaviors to reduce the recurrence of stress at the minimum water usage cost. As shown by the results of the experiment, the proposed framework has a stress forecasting accuracy of 96.3% and performs much better than the traditional machine learning, CNN-based, and transformer-based baselines. The system also decreases the predicted yield vulnerability by 46.6 and enhances water-use efficiency by 41.1 as compared to irrigation strategies based on rules. The results confirm the usefulness of spatio-temporal intelligence with predictive control in terms of effectiveness, and the proposed framework is a scalable and sustainable solution to precision agriculture of the next generation.
Why it matches plant phenotyping methodsUAV画像とセンサーデータから作物ストレスの時系列状態および収量脆弱性を推定する計算・センシング手法が研究の中心であり、灌漑制御への応用も技術評価の一部として記述されている。
abstractThe framework combines UAV-obtained RGB and multispectral and thermal imagery with measurements of soil sensors and meteorological data
Reproduction assets foundThe paper uses the public Kaggle Crop Health and Environmental Stress Dataset (UAV RGB/multispectral/thermal imagery plus soil/weather measurements and stress labels) as its phenotyping data source, and the authors provide an explicit public GitHub repository for the analysis code.Dataset · publicThe current research is based on the Crop Health and Environmental Stress Dataset, which is a publicly available
dataset on Kaggle, specially created to help perform a spatio-temporal analysis of crop health in response to changing
environmental and water-stress factors [26].Open asset ↗pdf-raw-page:10 lines:1-62Code · publicturn: Final zone-wise stress predictions 𝐶
𝑡
𝑧, Yield vulnerability trajectories 𝑉𝑡
𝑧, Optimal adaptive irrigation policy
𝜋∗
End Algorithm
Code availability:
The data used to support the findings of this study are included in the article.
Code availability:
The code used in this research work is available in the following link.
https://github.com/replyvenugopal/Cognitive-UAV-Driven-Agro-Surveillance
4. Result and Discussion
The architectural agro-surveillance solution, which is proposed to be executed by UAVs, is executed through a
modular and scalable software framework to guarantee reproducibility and extensibility. The experiments are all
performed in Python as a main programming languageOpen asset ↗github.com/replyvenugopal/Cognitive-UAV-Driven-Agro-Surveillancepdf-raw-page:24 lines:1-55Code / dataset availability confirmedEurope PMC · bioRxiv · checked 5 Sept 2026
ABSTRACT Leaf shape is a fundamental trait of plant ecological strategies, influencing biotic interactions and ecosystem functioning. However, established quantitative metrics fail to capture subtle variations and irregularities, require user-based reference points or are challenging to compare among taxa with broadly different leaf shapes. In addition, established metrics typically conflate (aggregate) leaf edge complexity and macro-shape complexity, despite their independent functional significance and genetic foundations. Here, we introduce an entropy-based framework to quantify two new complexity metrics: edge complexity and macro-shape complexity. Based on three case studies, we show that these metrics outperform aggregate metrics in predicting Quercus robur chemical traits, provide more intuitive interspecific classifications, and strongly align with human perception. In addition, edge and macro-shape complexity show high complementarity, while aggregate metrics are highly redundant and typically strongly related to leaf area. Emerging as the strongest predictor of leaf chemistry and key visual cue for complexity as perceived by humans, the effects of edge complexity highlight the under-appreciated functional significance of leaf margins. Our framework and the proposed entropy-based complexity metrics thus promise to help unlock the potential of growing digital image archives of leaves, including images from herbaria and fossils, and are technically readily applicable to shapes of algae, bacteria, pollen, and beyond. The accompanying package ShapeComplexity enables the broad application of entropy-based metrics, providing a powerful tool to explore how the shape of organisms and biological structures influences ecological strategies, biotic interactions, and ecosystem functioning while tracking spatial and temporal variation.
Why it matches plant phenotyping methods葉の画像からエッジ複雑性とマクロ形状複雑性を定量化する新規指標とソフトウェアを開発しており、植物形質抽出法が研究の中心である。
abstractHere, we introduce an entropy-based framework to quantify two new complexity metrics: edge complexity and macro-shape complexity.
Reproduction assets foundThe paper's authors publicly release their ShapeComplexity analysis code (Rust) on GitHub, used to compute the paper's leaf edge- and macro-shape complexity metrics. Supplementary data/analysis code are on Dryad, but that URL is not in the allowed list. RMBG is a generic third-party background-removal model, not a phenCode · publicThe complete, open-source Rust-code (The Rust Team, 2025 ) is publicly available on GitHub ( https://github.com/Thornbach/ShapeComplexity ), ensuring transparency and reproducibilityOpen asset ↗Thornbach/ShapeComplexitylines:86-94Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Accurate quantification of plant disease severity is essential for evaluating host-pathogen interactions and assessing the effectiveness of disease management strategies. Traditional visual scoring methods and manual estimation of infected tissue are widely used but are often subjective and prone to observer bias. Digital image analysis offers an objective alternative by enabling automated identification and quantification of symptomatic plant tissues based on color and spatial characteristics. Here, we present a MATLAB-based image processing protocol for differentiating diseased and healthy plant tissue from digital leaf images. The workflow involves acquisition of standardized leaf images, conversion of RGB images into hue-saturation-value (HSV) color space, segmentation of diseased tissue using defined HSV thresholds, refinement of the segmented mask through morphological operations, and extraction of the whole leaf area. The protocol then calculates the diseased area and total leaf area in pixels and computes the percentage of infected tissue. The method uses MATLAB together with the Image Processing Toolbox and can be implemented using simple scripts. This protocol enables rapid and reproducible quantification of disease severity in plant leaves exhibiting visually distinct symptoms such as necrotic lesions or blight patches. By minimizing observer bias and providing quantitative measurements of infected area, the protocol offers a practical and reproducible approach for plant disease phenotyping and evaluation of disease management strategies across diverse plant-pathogen systems where diseased tissues can be clearly distinguished from healthy tissues under reasonably controlled imaging conditions. Key features • A reproducible MATLAB-based workflow for separating diseased and healthy plant tissue using color-space segmentation. • Applicable to plant diseases where symptomatic tissue contrasts clearly with healthy tissue (necrosis, blight lesions, rot patches). • Requires digital leaf images, MATLAB, and the MATLAB Image Processing Toolbox for image processing and disease quantification. • Enables rapid calculation of diseased leaf area and disease severity using automated pixel-based quantification.
Why it matches plant phenotyping methods植物病斑を画像から分割・定量し、感染面積と病害重症度を算出するMATLAB画像解析プロトコルが研究の中心であり、植物病害表現型の取得・抽出手法に該当する。
abstractHere, we present a MATLAB-based image processing protocol for differentiating diseased and healthy plant tissue from digital leaf images.
Reproduction assets foundThe protocol explicitly deposits its authors' MATLAB image-processing workflow (HSV segmentation, mask refinement, pixel-based disease quantification) in a public GitHub repository with README instructions and example images.Code · publicGitHub repository containing the MATLAB source code, README file with installation and execution instructions, and representative example image(s): https://github.com/pankajborahmajuli-source/Leaf-Disease-Detection-MATLAB-Code/blob/main/README.mdOpen asset ↗Leaf-Disease-Detection-MATLAB-Codehtml-lines:112-148Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Published11 Aug 2026Engineering, Technology & Applied Science ResearchCited by 0 · OpenAlex ↗
Corn is a staple crop of global significance; however, foliar diseases may lead to 30–60% yield loss if not detected at an early stage. Conventional visual inspection is time-consuming, subjective, and difficult to scale for smallholder farmers worldwide. To overcome these issues, we present Corn Transfer Learning Network (CTL-Net), an end-to-end hybrid deep learning model for corn leaf disease identification. CTL-Net, which combines Inception-ResNet-v2 as the backbone and MobileNetV3 as a feature extractor in parallel convolutional streams, simultaneously learns diverse scales of texture information from low-level textures, mid-level structural patterns, and high-level disease semantics of RGB leaf images. Adaptive feature fusion is formulated through learnable weighting coefficients and bi-directional spatial–channel attention mechanisms, which further enhance feature discriminability and robustness. The proposed approach is tested on an extensive dataset of 12,456 images from 10 corn diseases, including Northern Leaf Blight, Common Rust, Gray Leaf Spot, and Cercospora Leaf Spot, acquired under controlled and real-field conditions. CTL-Net attains the highest classification accuracy of 99.42%, outperforming DenseNet121 (97.92%), EfficientNetB3 (97.35%), and general stacking models (97.89%). Robustness experiments demonstrate the effectiveness of the proposed method against illumination variations, additive noise, and partial occlusions. CTL-Net enables real-time inference with a latency of 42 ms on an NVIDIA RTX 3090 GPU. Gradient-weighted Class Activation Mapping++ (Grad-CAM++)-based interpretability analysis results in a mean Intersection over Union (IoU) of 87.6% with expert-annotated disease regions. Five-fold cross-validation, ablation studies, and statistical significance testing (p
Why it matches plant phenotyping methodsトウモロコシ葉画像から病徴・病害状態を推定する深層学習手法を開発し、複数モデルとの比較、頑健性評価、交差検証、アブレーションを行っており、植物フェノタイピング手法が中心である。
abstractwe present Corn Transfer Learning Network (CTL-Net), an end-to-end hybrid deep learning model for corn leaf disease identification.
Reproduction assets foundThe paper states its final curated corn leaf disease dataset (12,456 images, 10 classes) is publicly available via the authors' GitHub repository vishruthkp/maizedataset (reference [30] and Data Availability statement). The Kaggle PlantVillage and Corn or Maize Leaf Disease datasets are cited source inputs, not paper-Dataset · public"Prediction of Crop Yield using Machine Learning," International Available: https://github.com/vishruthkp/maizedataset.Open asset ↗vishruthkp/maizedatasetpdf-page:7 lines:1-53Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Reliable traits are needed for identification of tea ( Camellia sinensis ) cultivars, yet the stability of leaf morphology and color across leaf positions remains unclear. This study evaluated inter-cultivar variation and positional stability in leaf morphological, RGB color, and SPAD traits in six predominant cultivars. One-year-old shoots were sampled in a completely randomized design, and five fully expanded leaves below the apical bud were analyzed. SPAD values were measured with a chlorophyll meter, and scanned images were used to extract contour and RGB traits. Data were analyzed using ANOVA, correlation analysis, PCA, and discriminant analysis. Leaf morphology differed among cultivars and leaf positions, with significant cultivar-by-position interactions; however, the width-to-length ratio differed among cultivars but remained stable across positions in these cultivars. SPAD values increased with leaf position and were strongly associated with RGB components, being negatively correlated with R and G and positively correlated with B. Morphological traits explained 52.988% of total variance in PCA and yielded 64.6% overall classification accuracy, with LaoHan showing the highest accuracy (83.3%). Misclassification was concentrated among genetically similar cultivars. These findings suggest that stable leaf shape proportions and SPAD-RGB relationships provide useful descriptors, whereas genetic relatedness limits morphology-based cultivar identification under the present conditions.
Why it matches plant phenotyping methods茶品種識別のため、葉の形態・RGB・SPAD特性の取得と安定性、分類性能を中心に評価しており、画像由来形質抽出を含む実質的な表現型解析である。
abstractscanned images were used to extract contour and RGB traits
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe following supporting information can be downloaded at https://www.mdpi.com/article/10.3390/biology15151283/s1 , Table S1: Original data of leaf morphological traits, RGB values, and SPAD values from six tea cultivars in this study.Open asset ↗lines:368-409Code / dataset availability confirmedarXiv · OpenAlex · checked 15 Sept 2026
Accurate 3D crop monitoring underpins data-driven precision agriculture by enabling field-scale analysis of plant structure, growth dynamics, and management response. Modern 3D reconstruction methods perform strongly on generic benchmarks, but rendered appearance may not translate into metrically and agronomically useful geometry in crop fields. We introduce UAV3DCrop, a public benchmark of repeated multi-angle unmanned aerial vehicle (UAV) crop surveys. It contains 88,830 RGB images at $5280 \times 3956$ pixels, with a ground sampling distance of 3.6-5.8 mm, from 91 scenes spanning corn, soybean, wheat, and oat. Track A evaluates seven scene-optimized methods -- Neural Radiance Field (NeRF) and 3D Gaussian Splatting (3DGS) variants -- on held-out views, photogrammetry-referenced depth, and canopy-height recovery. Track B tests four pretrained feed-forward models on zero-shot camera-pose and geometry estimation. The scene-optimized methods rank differently across the three targets: Splatfacto-big leads appearance, whereas Scaffold-GS leads depth and is statistically tied with Splatfacto for canopy height. Among feed-forward models, MapAnything leads on seven of the eight metrics, while the remaining models vary more across crops and fail severely on absolute scale in a way that alignment conceals. Repeated acquisitions reveal further sensitivities that differ by output type and by model, associated with position within the acquisition sequence and with tie-point multiplicity. Current 3D reconstruction methods are therefore not yet interchangeable for agronomic use: no single method wins on appearance, geometry, and canopy height at once, and only one of four feed-forward models recovers usable metric scale. The dataset is publicly available at https://link-dev.github.io/UAV3DCrop/
Why it matches plant phenotyping methods植物キャノピー高さという明示的な形質を対象に、UAV 3D再構成手法をベンチマークし、公開データセットとして提供しているため、フェノタイピング手法が中心である。
abstractWe introduce UAV3DCrop, a public benchmark of repeated multi-angle unmanned aerial vehicle (UAV) crop surveys.
Reproduction assets foundThe paper introduces UAV3DCrop, a public benchmark of repeated multi-angle UAV crop surveys (88,830 RGB images, 91 scenes, four crops) with refined poses, photogrammetric depth references, and linked canopy-height and effective-LAI field measurements. The dataset is explicitly stated to be publicly available under CC BDataset · publiche acquisition sequence and with tie-point multiplicity. Current 3D reconstruction methods are therefore not yet interchangeable for agronomic use: no single method wins on appearance, geometry, and canopy height at once, and only one of four feed-forward models recovers usable metric scale. The dataset is publicly available at https://link-dev.github.io/UAV3DCrop/ .
Keywords:
UAV imagery; agricultural datasets; crop-field reconstruction; neural radiance fields;
Gaussian splatting; feed-forward geometry.
1 IntroductionOpen asset ↗UAV3DCroplines:1-90Code / dataset availability confirmedCrossref · Europe PMC · checked 15 Sept 2026
Turfgrass phenotyping relies heavily on visual quality (VQ) ratings and RGB indices like DGCI, but these are limited by observer subjectivity, coarse ordinal scales, or ratio formulations that do not reflect perceptual color differences. Hyperspectral and machine-learning tools overcome some limitations but remain costly and difficult to generalize, motivating the need for scalable and interpretable RGB color metrics. We introduce ΔEg, a perceptually anchored CIELAB ΔE distance from an ideal green that provides a continuous and interpretable measure of canopy color evaluated alongside a panel of RGB-derived metrics. A 3 × 3 nitrogen × irrigation greenhouse experiment using hybrid bermudagrass (TifTuf, Cynodon dactylon × C. transvaalensis) quantified canopy responses with RGB imaging, spectral reflectance, CCM-300 fluorescence, and chlorophyll assays. ΔEg correlated strongly with chlorophyll (r = 0.72), similar to DGCI (r = 0.73), and both exceeded CCM-300 (r = 0.29). HSVi showed the strongest association with VQ (r = 0.84) and was most sensitive to irrigation (ηp2 = 0.63). CIELUV v* explained the greatest model variation (R2m = 0.94) and responded most to fertilizer (ηp2 = 0.84). The yellow fraction was significant across all main and interaction effects and captured canopy decline (r = −0.82 with VQ). An illustrative decision-support scenario using ΔEg indicated that moderate fertilizer combined with mild deficit irrigation optimized turf color and input efficiency. Conclusions apply to controlled conditions, with field-scale validation identified as future work. These results demonstrate that interpretable RGB color metrics, anchored by ΔEg, offer a scalable alternative to VQ scoring and spectral systems.
Why it matches plant phenotyping methodsRGB画像から芝草キャノピー色を定量化するΔEgなどの指標を導入・比較し、クロロフィルや品質評価との技術的関連性を検証しており、植物表現型取得法が中心である。
abstractWe introduce ΔEg, a perceptually anchored CIELAB ΔE distance from an ideal green that provides a continuous and interpretable measure of canopy color evaluated alongside a panel of RGB-derived metrics.
Reproduction assets foundThe paper's Data Availability Statement deposits the phenotype data and the authors' Python image-processing/metric-computation scripts and R statistical analysis scripts in the USDA National Agricultural Library Ag Data Commons, a public repository. The full RGB imagery archive, however, is only available upon requestCode · public2025;23:673–687. doi: 10.1002/lom3.10705.
Associated Data
Data Availability Statement
Data and Python scripts used for image processing and %G, %Gr, %Y, ΔEg, DGCI, HSVi, BA SD , CIELUV v* metric computation, and R scripts used for statistical analysis are be available in the USDA National Agricultural Library Ag Data Commons ( https://agdatacommons.nal.usda.gov/ ), Data for—Proxima Green: RGB Color Metrics for Turfgrass Phenotyping in Controlled Conditions, accessed on 27 July 2026. The full RGB imagery archive will be made available upon reasonable request.Open asset ↗USDA National Agricultural Library Ag Data Commonslines:691-695Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
This dataset contains images of Manalagi apple diseases from Indonesia. Data collection was conducted from August 2024 to June 2026. Data were collected in apple orchards. All images were captured under natural environmental conditions. A total of 1168 unique Manalagi apple specimens were successfully documented. The specimens consisted of both healthy and diseased fruit. This dataset comprises four classes: Healthy, Anthracnose, Black Pox, and Powdery Mildew. Each specimen was observed and photographed directly. The documentation process yielded approximately 5100 raw images. The images were captured using various smartphone cameras and DSLR cameras. Each device has different camera specifications. The image size depends on the device used. Images that passed quality inspection were selected for the next stage. Each fruit specimen is cropped from the selected raw image. Each image was then labeled according to its disease class. The image size was standardized to 1024 × 1024 pixels. All images were saved in JPEG format. The curation process yielded 482 images. Each image represents a distinct fruit specimen.
Why it matches plant phenotyping methodsリンゴ果実の健全・病害状態を画像で記録し、分類用データセットとして構築・キュレーションした研究であり、植物病害表現型の取得方法と再利用可能なデータセットが中心です。
titleImage dataset of manalagi apple fruits for multi-class disease classification using deep learning.
Reproduction assets foundThe paper is a Data in Brief article describing a public Mendeley Data repository of Manalagi apple fruit disease images (raw, curated, and augmented), directly usable for plant disease phenotyping/classification.Dataset · publicRepository name: Mendeley Data
Data identification number: DOI: 10.17632/9zgkwwv9j8.6
Direct URL to data: https://data.mendeley.com/datasets/9zgkwwv9j8/6Open asset ↗Mendeley Data · 10.17632/9zgkwwv9j8.6html-lines:97-124Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Accurate color representation is critical for UAV-based crop phenotyping, yet UAV images are often distorted by variable illumination and camera exposure settings. Here, we propose Lite U-net FiLM (LUF-net), a lightweight U-net framework integrated with feature-wise linear modulation (FiLM) layers, which incorporates both multispectral-derived irradiance and camera exposure parameters as auxiliary inputs. This metadata-aware design enables dynamic modulation of intermediate image features, allowing the network to disentangle unified canopy color from environmental artifacts. Experiments conducted across diverse crop types (soybean, rice, maize), flight altitudes (6m, 12m, 25m, 40m), and illumination conditions (overcast skies, cloudy, sunny, early morning) demonstrate that the LUF-net model substantially reduces the mean absolute percentage error to below 5.5%, outperforming conventional Gray-world, U-net, AlexNet-MLP, and SIDBlock-MLP methods. Ablation experiments further show that both irradiance and exposure metadata provide complementary information, while FiLM-based conditioning effectively integrates these acquisition parameters into feature learning, jointly contributing to improved color reconstruction performance. Moreover, correlation analysis indicates that the model's color reconstruction errors are weakly dependent on irradiance and exposure settings, confirming that LUF-net reduces sensitivity to external imaging conditions while maintaining physically meaningful and robust corrections.
Why it matches plant phenotyping methodsUAV画像の色校正手法を開発し、複数作物・撮影条件で性能検証しており、作物フェノタイピングの画像取得・補正が中心である。
abstractAccurate color representation is critical for UAV-based crop phenotyping, yet UAV images are often distorted by variable illumination and camera exposure settings.
Reproduction assets foundThe paper's data and code availability statement explicitly points to a public GitHub repository containing training/evaluation/inference code, pretrained model weights, and example data for the LUF-net color calibration method.Code · publicThe data and source code for model training, evaluation, and inference, together with pretrained model weights, example data, and detailed usage instructions, is publicly available at: https://github.com/wangchufeng3652/color-correction.Open asset ↗wangchufeng3652/color-correctionhtml-lines:278-299Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Farmers must be able to estimate their crop yields at various growth stages for effective management of their farms and to enable them to interact with cooperatives or traders as early as possible. Here we developed an AI-based cocoa pod detection method using low resolution colour images of cocoa trees on farms in Côte d'Ivoire. We compared nano and extra-large architectures of six neural networks, including Faster RCNN, Baidu's Real-Time Detection Transformer (RTDetr), Detr-ResNet Vision Transformer (ViT), YOLOv5, YOLOv8 and YOLOv11. These networks were trained with 7,850 annotated cocoa pods on 400 low resolution images, and validated in two independent datasets: a 42 low resolution images containing 990 annotated pods, and a 100 low resolution images containing 2,400 annotated pods. The performances of the nano YOLOv8 and YOLOv11 networks were 2% higher than that of the RTDetr networks and 5% higher than that of the YOLOv5, ViT and Faster RCNN networks with an F1-score of 77% on all images and up to 90% on foreground trees. The dominance of nano architectures suggests that the extra-large architectures, which contain 20-30-times more neurons, may not have been fully trained. The study of learning performance curves showed that extra-large networks were unable to outperform nano networks, which contradicts the theory. After review, the annotated dataset was found to contain inconsistencies. The inconsistency of the training and validation data and their limited quantity restricted the objectivity of comparisons between network architectures. Finally, although the average detection performance of RTDetr for cocoa pods was only 2% lower than that of the YOLOv8 network, it was definitively excluded from the candidate models because its per-image processing time was 15-20% higher than that of YOLOv8 and YOLOv11. However, with a performance sensitivity to data of less than 0.5%, YOLOv8 Nano became the best option.
Why it matches plant phenotyping methodsカカオ果実を画像から検出・定量するAI手法を開発し、複数モデルと独立データセットで性能比較・検証しており、植物フェノタイピング手法が中心である。
abstractHere we developed an AI-based cocoa pod detection method using low resolution colour images of cocoa trees on farms in Côte d'Ivoire.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicData Availability: The data used in the study can be downloaded from CIRAD’s data verse at https://doi.org/10.18167/DVN1/8COJBB .Open asset ↗10.18167/DVN1/8COJBBlines:129-140Code / dataset availability confirmedOpenAlex · checked 11 Sept 2026
Unmanned aerial vehicle (UAV) photogrammetry offers a cost-effective approach to tree-level detection, however, Structure-from-Motion (SfM) outputs are sensitive to processing choices and site conditions, which can alter canopy representation and reduce individual-tree detection accuracy. Here, we systematically evaluate how SfM reconstruction quality and depth-map filtering influence RGB-only individual-tree detection under controlled acquisition conditions. Objectives were to (i) identify an optimal SfM-derived point-cloud configuration for delineating individual trees, and (ii) implement and test a segmentation workflow (local-maxima treetop detection plus Dalponte2016 in lidR) for detecting and counting trees. We assessed RGB-only SfM for individual-tree detection (ITD) across thirteen 1.21-ha loblolly pine ( Pinus taeda ) plots located in two counties in the state of Alabama in the southeastern United States; eight even-aged plantations and five mixed pine-hardwood stands, while holding image acquisition parameters constant. Using Agisoft Metashape Professional (Agisoft LLC, St. Petersburg, Russia), dense-cloud quality (Lowest, Low, Medium, High, Ultra High) and depth-map filtering (Disabled, Mild, Moderate, Aggressive) were varied in a 5 × 4 full-factorial design; assessment metrics included point-cloud density, canopy-surface completeness, canopy-height-model (CHM) agreement with field heights, and ITD precision/recall/F1. We identified a single high-resolution configuration (Ultra High + Disabled) by screening parameter sets for structural accuracy and suppression of false peaks. Using this configuration, CHMs matched field heights in Washington County, Alabama (R 2 = 0.96; RMSE = 0.44 m; bias = − 0.01 m) and in Cullman County, Alabama (R 2 = 0.44; RMSE = 1.14 m; bias = − 0.09 m); pooled performance was R 2 = 0.98; RMSE = 0.54 m; bias = − 0.01 m. ITD accuracy at the primary 3 m match radius yielded a precision of 0.03; recall = 0.29; F1 = 0.05 in the even-aged plantations (Washington) and a precision of 0.03; recall = 0.12; F1 = 0.05 in mixed pine–hardwood stands (Cullman); pooled F1 = 0.05. The selected parameters and workflow are reproducible and transferable, provide insight into RGB-SfM ITD performance, and indicate when lidar remains preferable for crown delineation.
Why it matches plant phenotyping methodsRGB-SfMによる個体樹の検出・樹高推定と、SfM設定およびセグメンテーションワークフローの系統的評価が研究の中心であり、植物の樹冠構造・樹高という形態形質を抽出する方法を検証している。
abstractwe systematically evaluate how SfM reconstruction quality and depth-map filtering influence RGB-only individual-tree detection
Reproduction assets foundThe paper's Code availability statement deposits the authors' SfM/ITD processing scripts publicly on OSF (DOI 10.17605/OSF.IO/UXBCZ). Phenotype/field datasets are only available on request, so they are not public assets.Code · publicThe workflow and processing scripts used in this study are publicly available through the Open Science Framework
(OSF) repository: Singh and Narine, [32]. Code Repository for Optimizing SfM Parameters for RGB-Only Individual-Tree
Detection in Loblolly Pine and Mixed Pine-Hardwood Stands. https://doi.org/10.17605/OSF.IO/UXBCZ.Open asset ↗10.17605/OSF.IO/UXBCZpdf-page:12 lines:1-70Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Plant diseases significantly affect agricultural productivity and global food security, while accurate disease identification remains challenging because of uncertain and overlapping visual symptoms in leaf images. Existing deep learning approaches often require large annotated datasets and suffer from limited interpretability in practical agricultural environments. This study presents a multi-parameter improved fuzzy soft set-based framework for plant disease classification using tomato leaf images from the PlantVillage dataset. The objective is to develop an interpretable and reliable classification model capable of handling uncertainty in plant disease patterns through feature-driven fuzzy similarity analysis. The methodology integrates image preprocessing, color and texture feature extraction, variance-based feature weighting, prototype generation using K-means clustering, and fuzzy similarity computation using Mahalanobis distance and Gaussian membership functions. RGB, HSV, and Gray-Level Co-occurrence Matrix (GLCM) features are extracted from standardized leaf images and evaluated within an improved fuzzy soft classification framework. Performance comparison is carried out using machine learning models including Support Vector Machine (SVM), Random Forest (RF), Linear Discriminant Analysis (LDA), and Naive Bayes (NB) implemented in Python using Scikit-learn libraries. Experimental simulation results demonstrate that the proposed framework achieves competitive classification performance while preserving interpretability and robustness under uncertain feature distributions. Performance evaluation is conducted through accuracy analysis, ROC-AUC curves, confusion matrices, ablation studies, and Wilcoxon Signed-Rank statistical testing. The proposed Improved Fuzzy Soft model achieved an accuracy of 88.57% which is less than LDA (94.92%), Random Forest (97.78%) and SVM (97.94%) classifiers. However, in the cross data set validation, the proposed Improved Fuzzy Soft model achieved an accuracy of 67.35% which is greater than LDA (51.02%), Random Forest (51.02%) and SVM (55.10%) classifiers. Statistical validation using the Wilcoxon Signed-Rank Test produced a p-value of [Formula: see text], confirming that the performance difference between the Improved Fuzzy Soft framework and the Random Forest classifier is statistically significant under the current experimental setting.
Why it matches plant phenotyping methodsトマト葉画像から植物病害状態を推定する解釈可能な画像解析・分類フレームワークを開発し、複数モデル、交差データセット検証、アブレーション、統計検定で評価しており、病害表現型の取得・抽出手法が中心である。
abstractThis study presents a multi-parameter improved fuzzy soft set-based framework for plant disease classification using tomato leaf images from the PlantVillage dataset.
Reproduction assets foundThe paper uses public tomato leaf image datasets (PlantVillage and PlantDoc from Kaggle) as phenotyping inputs and states the authors' Improved Fuzzy Soft Framework implementation is publicly available on Zenodo with source code and reproduction instructions.Dataset · publicThe dataset analyzed during the current study are available in the repository:
https://www.kaggle.com/datasets/abdallahalidev/plantvillage-datasetOpen asset ↗kaggle.com/datasets/abdallahalidev/plantvillage-datasetpdf-page:24 lines:1-75Code · publicThe implementation of the proposed Improved Fuzzy Soft Framework is publicly available through the Zenodo repository:
https://doi.org/10.5281/zenodo.20570546
The repository contains the source code, documentation, and instructions required to reproduce the experiments reported in
this study.Open asset ↗zenodo · 10.5281/zenodo.20570546pdf-page:25 lines:1-74Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Early crop establishment strongly influences plant performance and yield, making seedling emergence an important trait in crop phenotyping, breeding, and stress physiology studies. However, emergence monitoring is still commonly performed manually and typically records only the final emergence percentage, limiting the analysis to other dynamic observations. Automated image-based approaches are promising but remain challenging due to the small size of plant structures, heterogeneous soil backgrounds, and variability across imaging systems. Here, we present SPROUT (AI- based S eedling PR edicti O n and trait extraction U sing RGB T ime-series), a low-cost RGB imaging pipeline for automated prediction of crop emergence dynamics and trait extraction. The system integrates instance segmentation, object-detection–based data reduction, and temporal deep learning to estimate the emergence time of individual seedlings from RGB image sequences. The pipeline then automatically reconstructs emergence curves and extracts associated traits, including final emergence percentage, EC50, and emergence synchronicity. SPROUT was developed and evaluated using barley and wheat datasets acquired with different RGB cameras under controlled growth-chamber conditions. In the development and retraining settings, the best-performing TCN model achieved 90.0% per-well accuracy with a ± 2h tolerance, supporting accurate emergence curve reconstruction. In an independent inference-only dataset, the model still captured approximate emergence dynamics, although accuracy decreased to 59.3%, indicating that SPROUT is best used as a modular pipeline that can be retrained or fine-tuned for new crop, camera, or experimental domains. A cadmium-stress case study in two contrasting wheat genotypes showed that SPROUT-derived traits captured genotype-specific establishment strategies associated with growth and metabolic responses.
Why it matches plant phenotyping methodsRGB時系列画像から出芽動態を推定し、出芽率・EC50・同時性などの形質を抽出するパイプラインを開発・評価しており、植物フェノタイピング手法が中心である。
abstractHere, we present SPROUT (AI- based S eedling PR edicti O n and trait extraction U sing RGB T ime-series), a low-cost RGB imaging pipeline for automated prediction of crop emergence dynamics and trait extraction.
Reproduction assets foundThe paper's SPROUT emergence-prediction pipeline code is publicly available on GitHub with explicit availability language, and raw images plus morphology/metabolic data are deposited on Zenodo (10.5281/zenodo.18889863). The GitHub URL is in allowed_urls; the Zenodo DOI is not, so only the code asset is listed as an ad-Code · publiccan be found online at https://doi.org/10.1016/j.compag.2026.112184.Data availability
The raw images and raw data for the morphology and metabolic
profiling on the case study are available in ZENODO (10.5281/zen
odo.18889863), and the code for the machine learning pipeline and
emergence curve analysis are available on GitHub (https://github.com/kit-pef-czu-cz/sprout-emergence-prediction).References
Albarenque, S., Basso, B., Davidson, O., Maestrini, B., Melchiori, R., 2023. Plant
emergence and maize (Zea mays L.) yield across multiple farmers’ fields. Field Crops
Res. 302. https://doi.org/10.1016/j.fcr.2023.109090.Arsovski, A.A., Galstyan, A., Guseman, J.M., Nemhauser, J.L., 2012.
PhotomorpOpen asset ↗kit-pef-czu-cz/sprout-emergence-predictionpdf-raw-page:13 lines:78-112Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Orthoimagery derived from unmanned aerial vehicles (UAVs) has become a valuable data source for crop-growth monitoring. Individual plant-level (IPL) information enables high-throughput analyses by capturing plant-to-plant variability within fields. However, reliable IPL-based analysis requires accurate extraction of plant-specific regions, which remains challenging in soybean cultivation due to weed interference and canopy overlap. This study proposed an automatic preprocessing framework for IPL soybean growth monitoring that integrates deep-learning-based semantic segmentation with a furrow-guided region of interest (ROI) generation strategy using UAV imagery. A segmentation model was developed using combinations of RGB and multispectral orthoimagery, and a furrow line detection algorithm was designed to generate IPL ROIs aligned with crop rows. The ensemble model combining U-Net, DeepLabV3+, and SegFormer achieved the most stable performance (F1-score up to 0.94 and IoU up to 0.89). The furrow-guided ROI generation algorithm also accurately estimated crop counts, showing strong agreement with manual observations (R² = 0.90 and RMSE = 6.35). The generated IPL ROIs enabled accurate quantification of growth-related features, with strong agreement between automatically generated and manually delineated ROIs (R² > 0.90). Overall, the proposed preprocessing framework provides a practical and scalable solution for UAV-based high-throughput phenotyping in soybean and other ridge-based cropping systems.
Why it matches plant phenotyping methodsUAV画像から個体単位の植物領域を抽出し、成長形質を定量化する前処理・セグメンテーション手法が研究の中心であるため。
abstractThis study proposed an automatic preprocessing framework for IPL soybean growth monitoring that integrates deep-learning-based semantic segmentation with a furrow-guided region of interest (ROI) generation strategy using UAV imagery.
Reproduction assets foundThe authors state that the complete implementation of their IPL soybean preprocessing pipeline (semantic segmentation + furrow line detection) is publicly available on Zenodo. The annotated sample dataset, however, is only available upon request from the corresponding author, so it is not a public asset.Code · publicThe complete implementation of
this pipeline is publicly available at https://doi.org/10.5281/zenodo.21095307.Open asset ↗zenodo · 10.5281/zenodo.21095307pdf-page:7 lines:1-62Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Plant diseases threaten global agriculture, causing 20–40% yield losses and food insecurity. Current diagnostic methods are costly and lack scalability. While deep learning advances plant disease detection, there remains a need for CNNs with simpler architectures, better generalizability, and lower computational cost. This study presents a novel CNN for multi-class classification of 38 diseases. Trained on a public dataset of over 87,000 RGB images, the architecture comprises five convolutional blocks (filters 32–512) with max pooling and dropout (0.25, 0.4), followed by a 1,500-unit dense layer and SoftMax output. Optimized with Adam (lr=0.0001) and categorical cross-entropy, the model achieved 98% training and 96% validation accuracy with approximately 28.7 million parameters significantly fewer than transfer learning architectures. These results demonstrate an effective balance between predictive performance and computational efficiency, positioning the model as a promising tool for real-world agricultural deployment.
Why it matches plant phenotyping methods葉画像から植物病害を分類するCNNの開発と性能評価が研究の中心であり、植物の病害状態を直接推定するため、植物フェノタイピング手法に該当します。
titleLeaf-by-Leaf Diagnosis: A Custom CNN with Pyramidal Feature Extraction for Plant Disease Classification
Reproduction assets foundThe paper's sole qualifying asset is the plant disease image dataset used for all its CNN training/validation measurements: the publicly available New Plant Diseases Dataset (Augmented) on Kaggle, explicitly declared in the Data availability statement. No author code, trained model checkpoints, or other paper-specific Dataset · publict to disclose.
Acknowledgment:
The authors are sincerely grateful to their institutions for their continued support and trust, which greatly contributed to
the completion of this research.
Data availability
The dataset used and analyzed during the current study, “New Plant Diseases Dataset”, is publicly available on Kaggle at:
(https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset?select=New+Plant+Diseases+Dataset%28Augmented%29)
References
[1] P. Arputharaj and K. Karunanithy, "A review on machine learning and deep learning techniques for plant leaf disease
detection and classification with IoT in agriculture industry," Journal of Industrial Information Integration, vol. 50, Open asset ↗Kaggle · vipoooool/new-plant-diseases-datasetpdf-raw-page:11 lines:1-49Dataset · publict to disclose.
Acknowledgment:
The authors are sincerely grateful to their institutions for their continued support and trust, which greatly contributed to
the completion of this research.
Data availability
The dataset used and analyzed during the current study, “New Plant Diseases Dataset”, is publicly available on Kaggle at:
(https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset?select=New+Plant+Diseases+Dataset%28Augmented%29)
References
[1] P. Arputharaj and K. Karunanithy, "A review on machine learning and deep learning techniques for plant leaf disease
detection and classification with IoT in agriculture industry," Journal of Industrial Information Integration, vol. 50, Open asset ↗Kaggle · vipoooool/new-plant-diseases-datasetpdf-raw-page:11 lines:1-49Code / dataset availability confirmedEurope PMC · Crossref · checked 5 Sept 2026
Abstract Plant diseases affecting leaves and fruits cause substantial yield and economic losses worldwide, particularly in horticultural crops cultivated under diverse agro-climatic conditions. Early and accurate disease diagnosis is essential for effective crop management; however, manual inspection is time-consuming, subjective, and often infeasible at large scale. In this work, we present the Tomato–Chilli–Papaya (TCP) Fruit and Leaf Disease Dataset, a comprehensive multi-crop image dataset designed to support deep learning-based plant disease recognition. The dataset comprises labeled RGB images of healthy and diseased leaves and fruits from three economically important crops—tomato, chilli, and papaya—captured under real-field and semi-controlled environments, reflecting significant variability in illumination, background complexity, and disease severity. To demonstrate the applicability of the dataset, several commonly used convolutional neural network (CNN) architectures, including VGG, ResNet, DenseNet, MobileNet, and EfficientNet models, were trained and evaluated on the TCP dataset using transfer learning. Experimental results show that deep CNN models can effectively learn discriminative visual features corresponding to disease-specific patterns such as leaf spots, lesions, discoloration, curling, and fruit surface abnormalities. Lightweight models such as MobileNet achieve competitive performance with reduced computational cost, while deeper architectures provide improved accuracy at the expense of higher complexity. The results highlight the importance of dataset diversity for robust model generalization across multiple crops and plant organs. The TCP dataset provides a challenging benchmark for single-crop and multi-crop disease classification and supports the development of advanced deep learning, attention-based, and explainable AI models for precision agriculture. By enabling reproducible research and realistic performance evaluation, this dataset contributes toward scalable and practical AI-driven plant disease diagnosis systems aimed at reducing yield losses and supporting sustainable agriculture.
Why it matches plant phenotyping methods植物の葉・果実の病徴を画像から評価する大規模データセットとベンチマークを中心に扱っており、植物病害状態の画像ベース表現型解析に該当する。
abstractwe present the Tomato–Chilli–Papaya (TCP) Fruit and Leaf Disease Dataset, a comprehensive multi-crop image dataset designed to support deep learning-based plant disease recognition.
Reproduction assets foundThe paper introduces the TCP (Tomato-Chilli-Papaya) fruit and leaf disease image dataset and reports CNN experiments on it. The dataset is publicly deposited on Mendeley Data, and the authors state that analysis code is available on GitHub. Both are paper-specific, public, and actionable.Dataset · publicData is available on Mendeley:1Open asset ↗pdf-page:27 lines:1-51Code · publicCode availability: Code is available on GitHub 2Open asset ↗GitHubpdf-page:27 lines:1-51Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Rice seedling salt-tolerance evaluation commonly relies on visual scoring or destructive assays, which are subjective, labor-intensive, and difficult to standardize for population-level analysis. This study developed a new deep-learning-assisted hydroponic RGB phenotyping framework for standardized salt-stress evaluation and genetic mapping in rice seedlings. The framework integrates controlled hydroponic cultivation, RGB imaging, RicePhenoSeg-assisted annotation and trait extraction, ELMERF-based semantic segmentation, and image-derived quantification of salt-induced shoot injury. Using this framework, we constructed the Rice Seedling-Salt RGB Dataset (RSSD), which contains green shoot tissues, yellow shoot tissues, roots, and background from hydroponically grown rice seedlings. Based on RSSD, ELMERF achieved a mean Intersection over Union of 51.4% and a mean Accuracy of 89.5%, outperforming nine representative segmentation models. We further defined shoot yellowing rate (SYR) as an image-derived quantitative trait describing visible salt-induced shoot injury. The framework was applied to 261 re-sequenced rice accessions for population-level phenotyping and genome-wide association analysis. Compared with standard evaluation score and seedling death rate, SYR showed a more continuous phenotypic distribution and detected 36 significant SNPs, including a major signal near the Saltol/OsHKT1; 5 region. Notably, 34 SYR-associated SNPs were not detected by conventional visual scores. Overall, this study provides a targeted hydroponic RGB phenotyping framework for standardized rice seedling salt-stress evaluation and genetic analysis.
Why it matches plant phenotyping methods深層学習によるRGB画像セグメンテーション、形質抽出、データセット構築、性能比較を中核とし、画像由来の塩ストレス傷害形質を定量化する植物フェノタイピング手法である。
abstractThis study developed a new deep-learning-assisted hydroponic RGB phenotyping framework for standardized salt-stress evaluation and genetic mapping in rice seedlings.
Reproduction assets foundThe paper's Data Availability statement explicitly deposits datasets, source code, and supporting data in a public GitHub repository (ELMERF), which covers the RSSD RGB image dataset, segmentation code, and phenotyping/GWAS analysis assets. RiceVarMap is a cited external SNP database, not a paper-specific asset.Code · publicThe datasets, source code, and other supporting data are openly available on the ELMERF repository (https://github.com/PhenoCodexh/ELMERF).Open asset ↗PhenoCodexh/ELMERFhtml-lines:446-478Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Objective This study presents an integrated, multi-scale approach for the non-destructive estimation of phenological stages and carotenoid content in carrots by combining spectral techniques, colorimetry, and artificial intelligence. Methods Six commercial varieties, including orange, yellow, white, and purple genotypes, were evaluated under field and laboratory conditions using multispectral drone imagery, high-resolution spectroradiometric signatures, red green blue (RGB) images, and CIELAB color measurements. A hierarchical modeling framework was developed across two phases: (i) spectral modeling using uncrewed aerial vehicle (UAV)-based multispectral indices, textural and geometric metrics, and laboratory-generated hyperspectral signatures; and (ii) a colorimetric index from RGB images. Results Using UAV-based multispectral field data, phenological prediction indices achieved high classification performance (F1-scores > 0.90) when modeled with a Random Forest classifier, supported by distinct spectral signatures associated with canopy development and senescence. In parallel, carotenoid content estimation using a Random Forest regression model demonstrated strong predictive accuracy ( R 2 = 0.897; RMSE = 0.584), with the Plant Senescence Reflectance Index (PSRI) and Carotenoid Reflectance Index (CRI) identified as the most influential predictors. A complementary laboratory-based Random Forest regression model using high-resolution spectral signatures achieved near-perfect predictive performance ( R 2 = 0.987). SHapley Additive exPlanations (SHAP) analysis identified physiologically relevant wavelengths in the green (540-550 nm) and red-edge (∼700 nm) regions as the primary drivers of carotenoid concentration. Likewise, a novel colorimetric index (ICarot), derived from CIELAB parameters, enabled accurate image-based carotenoid estimation ( R 2 = 0.85). Conclusion This study introduces an innovative multi-sensor framework for precision agriculture and automated postharvest quality control, enabling rapid, objective, and scalable phenotyping in carrot production systems. Through the integration of spectral, colorimetric, and AI-based approaches, the proposed methodology effectively captures both internal nutritional attributes and external quality traits within a unified, non-destructive assessment pipeline.
Why it matches plant phenotyping methods複数センサー画像・分光計測とAIを統合し、ニンジンの生育段階およびカロテノイド含量を非破壊推定する手法を開発・評価しており、表現型取得が研究の中心である。
abstractThis study presents an integrated, multi-scale approach for the non-destructive estimation of phenological stages and carotenoid content in carrots by combining spectral techniques, colorimetry, and artificial intelligence.
Reproduction assets foundThe paper's Data Availability section explicitly deposits the study's data (and project materials) on GitHub and Zenodo, both with authors' public URLs matching allowed_urls. These qualify as paper-specific public assets for the carrot phenotyping measurements and analysis.Dataset · publicThe data is available at GitHub and Zenodo:
- https://github.com/agrocompuepidemlab/Carrot-value-chain-proyect/tree/mainOpen asset ↗github.com/agrocompuepidemlab/Carrot-value-chain-proyectlines:184-307Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Pearl millet is an important crop in arid regions, but its yield is reduced by foliar diseases like Downy Mildew and Rust. Traditional and deep learning methods struggle with accurate lesion detection, severity estimation, and robustness under complex field conditions, and often lack interpretability for practical agricultural deployment. To address these challenges, this study proposes the Adaptive Severity-Aware Swin Attention Network (ASA-SAN), an integrated framework designed for disease segmentation, classification, and severity estimation in pearl millet leaves. The proposed architecture combines a Swin Transformer encoder for hierarchical feature extraction with a ResUNet++ decoder for accurate lesion segmentation. This is further enhanced using Adaptive Channel Attention to improve feature discrimination and a dual-stream classification network to jointly capture local lesion characteristics and global contextual information. Additionally, an Adaptive Disease Severity Index (ADSI) is introduced to quantitatively assess disease progression based on lesion area ratio, color degradation, edge irregularity, and texture variations. Experimental evaluations conducted on a pearl millet leaf dataset demonstrate that the proposed method achieves a Dice score of 97.8%, IoU of 95.6%, classification accuracy of 98.3%, and F1-score of 98.2%, outperforming several state-of-the-art methods. Furthermore, Grad-CAM visualizations enhance model interpretability by highlighting disease-relevant regions. Overall, the ASA-SAN framework provides a robust, interpretable, and severity-aware solution for automated pearl millet disease analysis, enabling early detection and supporting precision agriculture practices for improved crop protection and yield optimization.
Why it matches plant phenotyping methods真珠粟葉の病斑を画像から分割・分類し、病害重症度を定量推定する手法を中心に開発・評価しているため、植物表現型計測手法として含める。
abstractAdditionally, an Adaptive Disease Severity Index (ADSI) is introduced to quantitatively assess disease progression based on lesion area ratio, color degradation, edge irregularity, and texture variations.
Reproduction assets foundThe paper's phenotyping inputs are drawn from a public, open-access image dataset: the Pearl Millet Leaf Disease dataset (Version 2) hosted on Roboflow Universe, containing annotated images of Downy Mildew, Rust, and healthy pearl millet leaves. This is a paper-specific, publicly available asset directly used for the作者Dataset · publicThe dataset used in this research was taken from the publicly available open-access Pearl
Millet Leaf Disease dataset hosted on Roboflow Universe, which has images of Downy
Mildew, Rust and healthy pearl millet leaves annotated publicly available [26]. To ensure
experimental consistency and reproducibility, all experiments were conducted with Version
2 of the open access dataset.Open asset ↗Roboflow Universepdf-raw-page:10 lines:1-28Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
LeafScans-Orchard is a curated, multi-year RGB image dataset of orchard plant leaves designed to support research in computer vision, machine learning, and plant phenotyping. The dataset comprises 9708 high-quality leaf scans acquired during collection campaigns conducted between 2015 and 2025, covering seven orchard crop species: apple, pear, sweet cherry, sour cherry, plum, peach, and apricot. In total, the dataset includes 67 cultivar labels. All samples were acquired using flatbed scanning under controlled conditions on a uniform background, ensuring high visual consistency and minimal background variability. The original scans were captured at 1200 dpi and subsequently converted into a public release format at 300 dpi, stored as lossless TIFF images to preserve morphological and textural details. Each image corresponds to a single leaf and is organized in a hierarchical directory structure by species, cultivar, and acquisition year, accompanied by image-level metadata and aggregated species–cultivar–year counts. LeafScans-Orchard is suitable for plant species classification, cultivar recognition, leaf morphology analysis, texture analysis, and general visual feature extraction. In addition to the main release, a representative subset of 300 original 1200 dpi scans is provided to support high-resolution analyses. The dataset is particularly suited for fine-grained classification, morphology-driven analysis, and methodological studies under controlled imaging conditions.
Why it matches plant phenotyping methods果樹葉のRGBスキャン画像を収録した公開データセットで、植物フェノタイピングおよび葉形態解析を目的とする。標準化された画像取得と再利用可能なデータ構成が中心であり、フェノタイピング用データセットとして適格。
abstractLeafScans-Orchard is a curated, multi-year RGB image dataset of orchard plant leaves designed to support research in computer vision, machine learning, and plant phenotyping.
Reproduction assets foundThe paper's core asset is the LeafScans-Orchard dataset itself (9708 RGB leaf scans, 300 dpi TIFF release plus 1200 dpi subset, image-level metadata and summary counts), openly deposited on Zenodo with an explicit DOI and CC BY 4.0 license. This is a paper-specific, public, actionable phenotyping image dataset. No codeDataset · publicthe published version of the manuscript.
Funding: This research received no external funding.
Institutional Review Board Statement: Not applicable.
Informed Consent Statement: Not applicable.
Data Availability Statement: The dataset described in this article is openly available in Zenodo
as LeafScans-Orchard Dataset (v1.0.0) at https://doi.org/10.5281/zenodo.20187966 (accessed on
10 May 2026). The repository includes the 300 dpi image release, the 1200 dpi high-resolution subset,
image-level metadata, aggregated species–cultivar–year counts, and supporting documentation. The
complete archive of original 1200 dpi scans is retained locally by the authors but is not included in
the current pubOpen asset ↗Zenodo · 10.5281/zenodo.20187966pdf-raw-page:12 lines:1-46Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Sapodilla (Manilkara zapota), or chickoo, is a key tropical fruit, very popular in India, Mexico, and Thailand, as it is nutritionally and economically valuable. Nonetheless, the production of sapodillas is often affected by several diseases, which reduce fruit quality and quantity. The dataset used in this paper is a sapodilla fruit image dataset, comprising 1,518 images, gathered in the field under the practicing conditions on 18 February 2025, 22 February 2025, in Rahu village, Pune district, Maharashtra, India, with the use of smartphone cameras. The data is sorted into four categories, namely: Anthracnose, Bacterial rot, Healthy, and Sap bleeding. The photographs were taken in different backgrounds and in different lighting conditions to represent real-life cultivation conditions. The data is expected to be useful in machine learning-based plant disease detection, classification, and analysis, and spur the creation of intelligent and sustainable agricultural systems.
Why it matches plant phenotyping methodsサポディラ果実の病害・健全状態を画像で記録したデータセット自体が中心で、植物病害の画像ベース表現型解析に利用できる。
titleA curated image dataset for sapodilla fruit (Manilkara zapota) disease and fruit quality analysis.
The Vines-DB dataset contains 1,218 original high-resolution RGB images of seven ornamental vine species collected under field conditions at the Utah Agricultural Experiment Station's Greenville Research Farm in Logan, Utah, USA. The dataset was generated from 168 individual vine plants that were transplanted in 2022 and photographed repeatedly across multiple months during the 2023 and 2024 growing seasons (July-October). Images were captured with an iPhone 16 Pro equipped with a 48 MP camera between 10:00 AM and 12:00 PM under daylight. Vines were grown on 1.2m x 2.4m trellises and photographed from a distance of 1m against black or white Styrofoam backdrops to improve contrast and reduce background noise. The dataset includes Akebia quinata, Campsis radicans, Hydrangea anomala petiolaris, Lonicera x heckrottii, Campsis x tagliabuana 'Madame Galen', Parthenocissus quinquefolia, and Wisteria floribunda. All original images were manually annotated in Roboflow by trained annotators to produce polygon-based instance segmentation masks for eight classes, including seven species and background. After preprocessing and data augmentation, the working dataset was expanded to 2,307 images for model development and evaluation. The augmented dataset was divided into 2,019 training images, 192 validation images, and 96 test images using stratified sampling to maintain balanced representation. Vines-DB supports the development and evaluation of deep learning models for multi-class instance segmentation in precision horticulture and urban ecology. The dataset enables applications such as automated canopy cover estimation, species identification, and scalable field phenotyping. In addition, repeated monthly imaging of the plants captures temporal variation in canopy development and plant appearance, increasing the dataset's utility for segmentation benchmarking under realistic field conditions.
Why it matches plant phenotyping methods植物のRGB画像とポリゴン注釈から成るデータセットを構築し、セグメンテーション評価およびキャノピー被覆推定などの植物フェノタイピングを支援することが中心であるため。
abstractVines-DB supports the development and evaluation of deep learning models for multi-class instance segmentation in precision horticulture and urban ecology.
Reproduction assets foundThe paper's core asset is the Vines-DB RGB image dataset with instance segmentation annotations, publicly deposited on OSF with an explicit DOI and URL matching an allowed URL.Dataset · publicData accessibility Repository name: Vines-DB
Data identification number: 10.17605/OSF.IO/YJHCK
Direct URL to data: https://osf.io/yjhck/overviewOpen asset ↗OSF · 10.17605/OSF.IO/YJHCKpdf-page:2 lines:1-49Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Early and accurate disease detection is important for increasing the agricultural output, decreasing the financial costs, and ensuring food security. Traditional diagnostic procedures take much time and effort, involve the necessity of having deep expertise, and are not always suitable for large scale farming disease detection. For this purpose, the current research suggests developing an explainable lightweight CNN-based model for crop disease identification based on RGB leaf images. The model utilizes several innovative architectural solutions such as depth-wise separable convolution, SE blocks, skip connections, and guided attention-based feature learning that allow enhancing the effectiveness of features extraction and decreasing computation load. Moreover, Grad-CAM is used to visualize affected areas on a map and thus increase the interpretability of the model. The suggested solution was implemented and tested on the PlantVillage dataset containing 54,305 images for 38 crop diseases out of 14 crops. The results show that the training, validation, and testing accuracies equal 97.6%, 88.3%, and 97.63%, correspondingly, along with the Macro-F1 measure of 0.867 and Micro-ROC-AUC equal to 0.99. A comparative study reveals that the presented model performs comparably well in terms of classification with lightweight structure and built-in interpretability capabilities to be applied in the mobile and edge-enabled agriculture environment. The results show that the presented approach is capable of being used as an effective and interpretable tool for diagnosing plant diseases in real-time.
Why it matches plant phenotyping methods葉画像から植物病害を推定するCNN手法の開発・評価が研究の中心であり、植物の病害状態を直接推定するため、植物フェノタイピング手法として含める。
abstractthe current research suggests developing an explainable lightweight CNN-based model for crop disease identification based on RGB leaf images.
Reproduction assets foundThe paper's plant-phenotyping input is the public PlantVillage leaf-image dataset (54,305 RGB images, 38 crop-disease classes), explicitly declared in the Data availability statement with a Kaggle URL. No author code, trained model, or checkpoint is deposited.Dataset · publicThe data set analyzed during current study are available in https://www.kaggle.com/datasets/emmarex/plantdisease.Open asset ↗Kaggle · emmarex/plantdiseaselines:366-390Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
In-season estimation of wheat grain yield potential is critical for crop management and advancing breeding efforts. Spike and spikelet counts serve as key indicators directly linked to yield potential, yet their assessment still relies on manual counting which is both labor-intensive and error-prone. High-resolution digital (RGB) imagery combined with deep learning-based object detection methods has substantially advanced automatic wheat spike detection and counting. However, precise spikelet-level phenotyping remains largely underexplored. This study evaluates two recent YOLO variants, YOLOv11 and YOLOv12, for wheat spike and spikelet detection and counting using oriented bounding boxes (OBB), and introduces a new large-scale benchmark dataset comprising 48,521 spike and 60,404 spikelet instances with OBB annotations. For spike detection, the pre-trained YOLOv11 achieved superior accuracy (mAP@0.5 = 95.8%, Pearson r = 0.993) with shorter training and inference times compared to YOLOv12. For spikelet detection, the non-pretrained YOLOv11 demonstrated higher accuracy (mAP@0.5 = 99.0%), while counting performance was comparable across models. These results establish OBB-based YOLO detection as a robust and scalable approach for AI-driven wheat phenotyping.
Why it matches plant phenotyping methods小麦の穂・小穂という収量関連形質の画像ベース検出・計数手法を比較評価し、大規模ベンチマークデータセットも構築しているため、フェノタイピング手法が中心である。
abstractThis study evaluates two recent YOLO variants, YOLOv11 and YOLOv12, for wheat spike and spikelet detection and counting using oriented bounding boxes (OBB), and introduces a new large-scale benchmark dataset comprising 48,521 spike and 60,404 spikelet instances with OBB annotations.
Reproduction assets foundThe paper openly states its supporting data (spike/spikelet imagery with OBB annotations) is available on Zenodo, and the underlying models are deployed on the authors' public WheatAI cloud platform.Dataset · publicData availability
The data supporting the findings of this study are openly available at: https://doi.org/10.5281/zenodo.20215489 .Open asset ↗zenodo · 10.5281/zenodo.20215489lines:219-266Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Apple leaf disease segmentation is critical for yield and quality preservation in what is globally one of the most economically significant fruit crops. Despite recent advances in deep learning, real-world orchard environments present three primary challenges: (1) low contrast between lesions and background textures, which hinders accurate localization; (2) leaf overlap and occlusion, leading to incomplete feature representation and increased false negatives; and (3) the inherent limitations of unimodal RGB imagery in capturing subtle pathological features, which constrains generalization and accuracy. To address these issues, we proposed Language-Infused Visual Mamba (LViM), a dual-path U-Net architecture that integrates Mamba and Transformer modules for semantic-visual feature fusion. LViM achieves robust segmentation in complex environments through three core innovations: (1) A U-shaped Multimodal Transformer (MTT) branch integrated with AMBERT, which leverages inter-modal semantic relationships to enhance textual feature extraction and provide high-level semantic cues, thereby improving lesion-background discriminability; (2) a U-shaped Visual State Space (VMamba) branch that employs 2D Selective Scanning (SS2D) and Visual State Space (VSS) blocks to capture global context and fine-grained details, mitigating the impact of occlusion; and (3) Cross-Attention Gate Fusion (CAGF) and Linguistic Cross-Nested (LCN) modules that facilitate efficient cross-modal alignment and hierarchical feature modeling to better identify subtle lesions. Experimental results demonstrate that LViM consistently outperforms the VM-UNet baseline, yielding improvements of 4.05% in Precision, 4.25% in Dice coefficient, 4.49% in mIoU, and 4.23% in Recall.
Why it matches plant phenotyping methodsリンゴ葉の病斑を画像から分割する手法を開発し、複雑な環境での性能を評価しており、植物病害状態の取得・推定が研究の中心である。
abstractApple leaf disease segmentation is critical for yield and quality preservation
Reproduction assets foundThe paper's curated multimodal apple leaf disease dataset (image-text pairs with pixel-level annotations for four disease types) is explicitly stated as publicly released in the authors' LViM GitHub repository. Code/models are only promised 'upon acceptance,' so the dataset asset qualifies as public, while the code is.Dataset · publicThe curated multimodal apple leaf disease dataset constructed in this study has been publicly released at https://github.com/csuft1906ll/LViMOpen asset ↗csuft1906ll/LViMlines:273-283Code / dataset availability confirmedOpenAlex · Europe PMC · bioRxiv · checked 5 Sept 2026
Abstract Waterlogging is a major constraint on barley productivity, yet its dynamic, multi-phase nature makes it challenging to dissect using traditional phenotyping approaches. High-throughput phenotyping (HTP) platforms address this by enabling temporal, multi-sensor imaging of large populations, but generate complex datasets that demand new analytical frameworks. Here, we imaged 230 barley accessions over 14 days of waterlogging stress and seven days of recovery using visible, chlorophyll fluorescence, and hyperspectral sensors. Explainable AI was applied to classify stress responses into early stress, late stress, and recovery phases, achieving 86% classification accuracy, and to identify the hyperspectral indices most informative for each phase. Water index (WATER1) and structure insensitive pigment index (SIPI) emerged as primary predictors of stress response. Longitudinal genome-wide association studies (GWAS), using a treatment-by-marker interaction model, identified 236 significant loci across 12 linkage disequilibrium blocks, implicating candidate genes involved in oxidative stress regulation, transcriptional control, and auxin transport. MYB transcription factors were consistently identified across all stress phases, underscoring their central role in waterlogging adaptation. To support interpretation of longitudinal GWAS results, we developed 3D-QTLVis, an interactive visualisation tool that extends Manhattan plots across time, enabling clearer identification of dynamic genomic regions underlying stress tolerance.
Why it matches plant phenotyping methods長期マルチセンサー画像による水ストレス応答の表現型取得と、AIによるフェーズ分類・指標抽出が研究の中心であり、3D-QTLVisも開発している。
abstractHigh-throughput phenotyping (HTP) platforms address this by enabling temporal, multi-sensor imaging of large populations
Reproduction assets foundThe paper's authors publicly release their GWAS Interaction model R scripts and the 3D-QTLVis Shiny visualization tool on GitHub; no public phenotype dataset or trained model deposit is stated (phenotypic data only as summary statistics in supplements).Code · publicCode used for running the GWAS interaction model in R and the 3D-QTLVis tool are available at https://github.com/Walshj73/3D-QTLVis .Open asset ↗Walshj73/3D-QTLVislines:216-267Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
ToBRFV is a major threat to tomato and pepper crops because it spreads quickly and survives for a long time in the environment. Since there are few ways to control it after infection, early detection before symptoms are visible is crucial. Yet, only limited public datasets are available for this research. We present one of the first openly accessible, longitudinal multispectral image dataset dedicated to ToBRFV detection. In this study, two tomato cultivars and two pepper cultivars, all of which are commercially important and widely cultivated in greenhouses, were selected. Using these plants ensures that the dataset reflects real-world agricultural practices and captures variability across commercially grown types. Both healthy and ToBRFV-inoculated plants from each cultivar were included in the imaging process. All plants were cultivated under fully controlled greenhouse conditions in Adana Province, Türkiye. Healthy and infected tomato plants were grown in two separate greenhouses to prevent cross-contamination. Imaging was conducted over a 29-day period using Red-Green-Blue (RGB) and Visible Near Infrared (VNIR) cameras, including narrowband captures at 800 nm and 1000 nm, from multiple viewing angles. Infection status was confirmed via Reverse Transcription quantitative Polymerase Chain Reaction (RT-qPCR) analysis at multiple time points. The dataset is organized into four clean, labelled subsets and released under a CC BY 4.0 license. This resource provides unique opportunities for developing and benchmarking computer vision and machine learning approaches for pre-symptomatic plant disease detection, spectral feature analysis, and integration into precision agriculture systems. By combining controlled experimental design, spectral diversity, and open access, it establishes a robust foundation for cross-disciplinary research in plant pathology, agricultural engineering, and artificial intelligence.
Why it matches plant phenotyping methods植物病害状態を対象にした縦断マルチスペクトル画像データセットであり、公開データセットとして開発・ベンチマーク利用を目的とするため、表現型取得が中心です。
abstractWe present one of the first openly accessible, longitudinal multispectral image dataset dedicated to ToBRFV detection.
Reproduction assets foundThe article is a Data in Brief describing the authors' own openly released longitudinal multispectral plant image dataset (ToBRFV-LMID) for tomato and pepper disease detection, deposited on Zenodo under CC BY 4.0 with a direct DOI URL. This is a paper-specific, public, directly actionable phenotype/image asset. No codeDataset · publicData accessibility
Repository name: ZENODO
Data identification number: 10.5281/zenodo.17244968
Direct URL to data: https://doi.org/10.5281/zenodo.17244968Open asset ↗ZENODO · 10.5281/zenodo.17244968html-lines:98-126Code / dataset availability confirmedCrossref · checked 13 Sept 2026
AppleStrawberryGreenhouseLiDAR / point cloudRGB / grayscaleFruitSegmentationTracking
Accurate and consistent fruit monitoring over time is a key step towards automated agricultural production systems. However, this task is inherently difficult due to variations in fruit size, shape, occlusion, orientation, and the dynamic nature of orchards where fruits may appear or disappear between observations. In this article, we propose a novel method for fruit instance segmentation and re-identification on 3D terrestrial point clouds collected over time. Our approach directly operates on dense colored point clouds, capturing fine-grained 3D spatial detail. We segment individual fruits using a learning-based instance segmentation method applied directly to the point cloud. For each segmented fruit, we extract a compact and discriminative descriptor using a 3D sparse convolutional neural network. To track fruits across different times, we introduce an attention-based matching network that associates fruits with their counterparts from previous sessions. Matching is performed using a probabilistic assignment scheme, selecting the most likely associations across time. We evaluate our approach on real-world datasets of strawberries and apples, demonstrating that it outperforms existing methods in both instance segmentation and temporal re-identification, enabling robust and precise fruit monitoring across complex and dynamic orchard environments. • We propose a new performant approach to autonomous fruit tracking in real greenhouses. • It segments fruits using learning-based instance segmentation and RGB 3D point clouds. • Segmented fruits are encoded by a 3D CNN and matched via attentive data association. • Experiments on real strawberry and apple datasets show our method outperforms others. • Our approach enables precise temporal fruit monitoring in real and complex scenarios.
Why it matches plant phenotyping methods果実を個体単位で3D点群からセグメンテーションし、時系列追跡する画像解析手法の開発・評価が研究の中心であり、植物器官の状態を抽出するため適格。
abstractwe propose a novel method for fruit instance segmentation and re-identification on 3D terrestrial point clouds collected over time
Reproduction assets foundThe paper explicitly states that the authors' implementation of the fruit matching method (IRIS3D) is publicly available on GitHub, which is the computational analysis code for this paper's fruit segmentation and re-identification phenotyping pipeline.Code · publicThe implementation of our fruit matching method is publicly available at https://github.com/PRBonn/IRIS3D .Open asset ↗PRBonn/IRIS3Dlines:72-99Code / dataset availability confirmedCrossref · OpenAlex · Europe PMC · checked 5 Sept 2026
Ear density ( ) and ear surface area in cereals are important traits for adaptation to low inputs and climate change. Here we propose a high-throughput field phenotyping method to estimate these traits using nadir and 45° RGB images acquired by the Phenomobile ground robot. First, the YOLOv5 ear detection algorithm is applied to nadir RGB images to estimate . Second, an ear segmentation algorithm is applied to nadir and 45° RGB images to compute the ear gap fraction at different viewing angles. The Beer-Lambert law is then inverted to compute the ear area index (EAI) from the observed ear gap fraction. is finally derived as the ratio between EAI and . We applied the methodology to a panel of 10 commercial bread wheat varieties how both traits vary across 12 environments. The relative error obtained for awnless varieties is 12% (56 ears m -2 ) for and 18% (1.3 cm 2 ) for . For awned varieties, ground-truth observations of were shown to be biased due to an overestimation of awns contribution, leading to an error of 41% (3.6 cm 2 ). was strongly correlated with grain dry mass per ear at harvest ( r 2 = 0.80 across genotypes and environments, r 2 per genotype ranged between 0.80 and 0.95) and was strongly correlated with grain yield ( r 2 = 0.83). These results indicate that both EAI and can be interesting non-destructive proxies for yield and grain dry mass per ear.
Why it matches plant phenotyping methodsRGB画像と地上ロボット、物体検出・セグメンテーション・Beer–Lambert法を組み合わせ、コムギ穂の密度と表面積を推定・検証する手法が研究の中心であるため。
abstractHere we propose a high-throughput field phenotyping method to estimate these traits using nadir and 45° RGB images acquired by the Phenomobile ground robot.
Reproduction assets foundThe authors publicly release their ear surface area estimation algorithm with an example dataset on an INRAE forge repository, and the Phenomobile-derived ear density/ear surface area estimations used in the multi-environment analysis are included as supplemental material with the open-access article. The YOLOv5 GWC_SoDataset · publicThe algorithm developed to estimate the EAI and the average ear surface using binary images from ear segmentation are publicly available in the repository https://forge.inrae.fr/raul.lopez-lozano/wheat-ear-surface , jointly with an example dataset from the Mauguio 2023 trial (4 treatments, 1 replicate). The Phenomobile estimations of ear surface area and ear density used in the multi-environmental mixed model presented in Section 2.5 are included as supplemental material.Open asset ↗lines:614-652Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Three-dimensional (3D) point-cloud phenotyping enables non-destructive and repeatable characterization of plant architecture, supporting the measurement of traits such as internode length, branching topology, and organ orientation. This article presents TomatoPGT (Tomato Plant Graph Twin) , a 3D tomato dataset designed for research on semantic/instance segmentation, graph-based structural representation, and graph-derived phenotypic trait extraction. The dataset contains 42 scans from three greenhouse-grown tomato plants acquired across early to mid-vegetative development using a rotational multi-view imaging system. Each scan consists of 60-70 overlapping RGB images captured under uniform illumination and reconstructed into a metrically scaled dense colored point cloud using Structure-from-Motion and multi-view stereo. TomatoPGT provides: (i) multi-view RGB images, (ii) dense colored point clouds, (iii) manually curated semantic and instance annotations at organ level, (iv) graph representations encoding plant topology and geometry, and (v) tabulated phenotypic traits computed deterministically from the graphs (internode length, insertion angles, and phyllotactic angles). TomatoPGT supports reproducible development and evaluation of 3D phenotyping pipelines, including learning-based segmentation and graph-based modeling of plant architecture.
Why it matches plant phenotyping methods植物の3D形態表現型抽出を目的としたデータセットで、画像・点群・器官アノテーション・グラフ・形質値を提供し、再現可能なフェノタイピング手法の開発と評価を直接支援している。
abstractThis article presents TomatoPGT (Tomato Plant Graph Twin) , a 3D tomato dataset designed for research on semantic/instance segmentation, graph-based structural representation, and graph-derived phenotypic trait extraction.
Reproduction assets foundThe paper's own TomatoPGT dataset (multi-view RGB images, dense point clouds, semantic/instance annotations, graph representations, and CSV phenotypic traits) is publicly deposited on Mendeley Data, and the authors' Cloud-Seg/Cloud-Graph software tools plus supplementary materials (camera calibrations, example datasetsDataset · publicRepository name 1: Mendeley[2].
Data identification number: DOI: 10.17632/72md54c7n7.1
Direct URL to data: https://data.mendeley.com/datasets/72md54c7n7/1Open asset ↗Mendeley · 10.17632/72md54c7n7.1html-lines:105-178Code · public6. Code and documentation: CloudSeg and CloudGraph software tools, environment specifications, and example usage instructions are hosted on Zenodo[3].Open asset ↗Zenodohtml-lines:264-308Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
A comprehensive description of plant phenotypes of certain taxa is an important task when describing genera and species, as well as when setting their natural taxonomies. The development of modern technologies of effective phenotyping makes it possible to obtain a large amount of data with a quantitative and/or qualitative description of various traits in plants, mainly based on the analysis of their digital images. The study compared the results of the F2 hybrids assessment - visually and using machine learning methods - of two endemic tetraploid (2n = 4x = 28) wheat species which are Ethiopian wheat (Triticum aethiopicum Jakubz.) and Kartalian or Dika wheat (T. carthlicum Nevski). In the latter case, it is proposed to use the method of a mixture of Gaussian (normal) distributions in plant morphometry in order to identify groups that differ in character values. Most taxonomically important (species-specific) traits are controlled oligogenically and have a clear phenotypic manifestation, so hybridological analysis was an indispensable and basic type of analysis for subsequent detailed phenotyping of wheat spikes using machine-learning methods. According to a number of criteria, the estimates of patterns of inheritance obtained by different methods coincide. Based on the conducted research, we can state that the trait "tetraaristatum" (the presence of awns on both flower and spike glumes) is species-specific (taxonomically important) for T. carthlicum and it can be effectively used for taxonomic purposes both in carrying out hybridological analysis and in experiments using machine learning. Such a species-specific character is the "character (type) of awnedness" for T. aethiopicum. Our study demonstrates that a combination of automatic phenotyping methods and a model of a mixture of Gaussian distributions can, in principle, lead to an automatic analysis of the allocation of classes in F2 hybrids. It allows, in turn, to detect the presence of genes associated with species-specific traits of wheat plants. Further, the improvement of the applied artificial intelligence (AI) algorithms is required.
Why it matches plant phenotyping methodsコムギ穂の形態形質を対象に、画像に基づく機械学習フェノタイピングとガウス混合モデルを提案・適用しており、表現型の自動抽出・分類が研究の中心である。
abstractThe study compared the results of the F2 hybrids assessment - visually and using machine learning methods
Reproduction assets foundThe paper's supplementary materials (Supplementary Tables S1–S3 and Figure S1) contain the paper-specific phenotyping data: species-specific trait descriptions, the 19 spike morphometric characters per projection, and the Gaussian mixture model splitting results (means, variances, group sizes, χ² values). The full textSupplement · publicof these traits
are controlled by oligogenes and have a clear phenotypic
manifestation, the hybridological method was an indispensable
and primary type of analysis for subsequent detailed
phenotyping spikes of wheat species using machine learning
methods.
Supplementary Materials are available in the online version of the paper:
https://vavilov.elpub.ru/jour/manager/files/Suppl_Kruch_Engl_30_3.pdf
Plant material. The object of study was interspecific
hybrids obtained by crossing two endemic tetraploid
wheat species ♀T. aethiopicum Jakubz. (k-19301/2) with
♂T. carthlicum
Nevski (k-32496). The experiment was produced
in spring sowing in the greenhouses of the Breeding
and Genetics Complex (BGC)Open asset ↗lines:111-200Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
PollenBB16 is an RGB pollen image dataset of Chilean flora with pixel-accurate instance segmentation masks, whose annotation was fully verified by an expert palynologist to guarantee the taxonomic reliability of every published instance. The dataset is designed to close a concrete gap in existing palynological datasets, which typically combine low taxonomic diversity, few samples per class, and low-resolution crops restricted to bounding boxes. PollenBB16 contains 16,198 brightfield optical microscopy images at the native resolution of 3088 × 2064 pixels and 36,383 pixel-accurate polygons across 16 species from the Biobío Region, spanning endemic, native and exotic species of high ecological and melliferous value such as Eucryphia glutinosa and Quillaja saponaria (endemic), Gevuina avellana and Aristotelia chilensis (native), and Medicago sativa and Brassica rapa (introduced). Each spatial position is recorded at three focal planes. The displacement along the z axis reveals features of the exine together with information on the internal structure of the grain that remain inaccessible on a single plane. From this multifocal information, more robust convolutional networks can be trained with more accurate classification. The operational quality of the dataset is backed by a leakage-safe partition that keeps the three focal planes of the same position in the same subset to avoid metric inflation, complemented by a YOLO11n-seg baseline trained for 50 epochs that reaches 0.985 mask mAP@50 on the validation set, establishing a reproducible reference point. Beyond deep learning, PollenBB16 enables interdisciplinary applications in aerobiology, biodiversity monitoring under climate change, ecological restoration of the South American temperate forest, and botanical-origin authentication of Chilean monofloral honeys.
Why it matches plant phenotyping methods植物由来の花粉粒を対象とした高解像度画像データセットとセグメンテーション基準を構築し、深層学習による画像解析を再現可能な形で検証しているため、植物フェノタイピング手法・データセットとして中心的です。
abstractPollenBB16 is an RGB pollen image dataset of Chilean flora with pixel-accurate instance segmentation masks
Reproduction assets foundThe paper's PollenBB16 pollen image dataset (16,198 multifocal RGB microscopy images with pixel-accurate instance segmentation masks) and the accompanying authors' script polygons_to_bboxes.py are publicly deposited on Zenodo (10.5281/zenodo.19830051), per the Data Availability Statement.Code · publicThe only custom code distributed with this Data Descriptor is the Python script polygons_to_bboxes.py, which regenerates the YOLO bounding-box labels in labels_bb/ from the polygon labels in labels/. The script is packaged inside the scripts/ folder of the same Zenodo repository that hosts the dataset (10.5281/zenodo.19830051) and is released under the Creative Commons Attribution 4.0 International (CC BY 4.0) license, with no restrictions on access.Open asset ↗Zenodo · 10.5281/zenodo.19830051html-lines:731-797Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
The increasing global food insecurity driven by climate-induced natural hazards and soil degradation has made the resilience of alternative agricultural systems a critical focus in risk management. This study presents a geospatially integrated monitoring framework, the Optimized Multi-Scale Adaptive Graph Neural Network (OMSA-GNN), designed to mitigate risks associated with nutrient instability in hydroponic and aeroponic environments. The proposed system leverages a Raspberry Pi-based IoT network to monitor complex interactions among microclimatic variables, plant physiological health, and nutrient concentrations, treating them as localized geospatial data points. To enhance decision-making under environmental uncertainty, an Improved Sparrow Search Algorithm (ISSA) is employed to optimize the predictive performance of the GNN. The OMSA-GNN model incorporates visual plant indices as a proximal remote sensing approach to enable early detection of physiological stress that may lead to crop failure. Evaluated using a lettuce growth dataset, the framework demonstrates superior performance in forecasting growth trajectories and managing resource-related risks compared to conventional static models. The results highlight a scalable approach for improving the reliability of urban food systems, where traditional land-based agriculture is increasingly vulnerable to natural hazards.
Why it matches plant phenotyping methods植物の生理的ストレスと成長軌跡を、視覚的植物指数およびIoTセンサーデータから推定するGNNベースの監視・解析手法が研究の中心であり、植物表現型取得と予測に該当する。
abstractThe OMSA-GNN model incorporates visual plant indices as a proximal remote sensing approach to enable early detection of physiological stress that may lead to crop failure.
Reproduction assets foundThe paper's Data Availability statement points to a public Kaggle lettuce growth dataset used for evaluation, matching an allowed URL. No author code or model checkpoints are disclosed.Dataset · publicThe datasets used and/or analyzed during the current study are available in the Kaggle repository, https://www.kaggle.com/datasets/jurijsruko/lettuce/data.Open asset ↗Kaggle · jurijsruko/lettucehtml-lines:469-500Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
The research proposes Cross Disease Similarity Awareness Learning (CDSAL), a robust multiclass tomato leaf disease detection framework based on high-quality and explainable deep learning. The approach solves the problem of superimposed patterns of disease especially Leaf Miner, Tomato Spotted Wilt Virus (TSWV), and nutrient deficiencies through the combination of multi-domain feature learning and inter-disease similarity modeling. In contrast to conventional metric learning or contrastive learning methods that function on pairwise or triplet sample associations, CDSAL develops a class-level Cross Disease Similarity Matrix that represents structured inter-disease proximity within the embedding space. Moreover, rather than employing episodic prototype construction typical of few-shot learning, the proposed system persistently updates centroid representations throughout supervised training and incorporates similarity-aware regularization directly into the loss function. This facilitates structural embedding reshaping specifically designed for visually overlapping illness categories, beyond traditional prototype-based learning methodologies. The input images are processed through HSV based green masking, morphological cleaning, extraction of leaf contours and resizing, and using a large amount of geometric and color-space augmentation to reduce the imbalance among the classes. DenseNet121 and EfficientNet-B0 are used to obtain feature representations and class-separated centroid of latent embedding's to form a Cross Disease Similarity Matrix, where similarity-aware optimization is possible during training. Grad-CAM on the target layers offers decipherable disease-specific activation signatures. The findings of the experiments show that classification accuracy at unseen samples is 99.77% with high resilience to visual confounding. The predictions, proximity of diseases that are similar and explainable features are provided by CDSAL, thereby facilitating reliable decision-making in agricultural diagnostics.
Why it matches plant phenotyping methodsトマト葉の病害状態を画像から推定する深層学習手法を提案し、前処理・特徴抽出・類似度学習・説明可能性を技術的中心として評価しているため。
abstractThe research proposes Cross Disease Similarity Awareness Learning (CDSAL), a robust multiclass tomato leaf disease detection framework based on high-quality and explainable deep learning.
Reproduction assets foundThe paper's plant-phenotyping inputs are two publicly available Kaggle image datasets explicitly named in the Data Availability statement: PlantVillage (emmarex/plantdisease) used as the main dataset and TomatoVillage (mamtag/tomato-village) used for ablation/field-condition experiments. No author analysis code, modelsDataset · publicThe datasets analyzed during the current study are available in the Kaggle repository. [https://www.kaggle.com/datasets/emmarex/plantdisease]Open asset ↗Kaggle · emmarex/plantdiseasehtml-lines:605-624Code / dataset availability confirmedCrossref · Europe PMC · checked 15 Sept 2026
Abstract Plant diseases are a serious danger to the world’s food security, because they lower agricultural output and increase economic losses. Due to subjectivity, fluctuating lighting, and environmental unpredictability, traditional visual examination techniques are frequently incorrect. The Excess Green (ExG) vegetation index and pseudo-thermal representations produced from RGB pictures are two synthetically developed complementary representations that are integrated with RGB imagery in this study’s lightweight multimodal deep learning system to address these issues. Histogram shifting and pseudo-infrared color mapping are used in a reproducible picture alteration pipeline to create the pseudo-thermal modality, which allows for extra visual signals without the need for specific thermal sensors. In order to classify plant diseases while preserving computational efficiency, the suggested framework uses MobileNetV3-Small backbones to extract modality-specific characteristics. This is followed by feature-level fusion. The publicly accessible Ginger Leaf Dataset, which includes RGB pictures of ginger leaves in four different conditions—Damage-Pest, Dehydrated, Healthy, and Leaf-blight—was used for the experiments. For training, validation, and testing, the dataset was split using a stratified 70:15:15 split. Python-based preprocessing procedures were used to create the extra modalities (ExG and pseudo-thermal representations) from the original RGB images. The experimental results show that the combination of the representations with RGB images can enhance the classification performance compared with the unimodal RGB-based models. Ablation experiments are also conducted to examine the contributions of different modalities to the overall categorization accuracy. The experimental results show that plant disease recognition can be improved with the help of efficient computing by combining lightweight convolutional neural networks with computationally generated visual representations.
Why it matches plant phenotyping methodsRGB画像からExG・疑似熱画像を生成し、植物葉の病害状態を分類するマルチモーダル手法が研究の中心であり、アブレーション評価も実施している。
titleHybrid deep learning-based multimodal framework for plant leaf disease classification using RGB, Excess Green (ExG), and pseudo-thermal representations with MobileNetV2
Reproduction assets foundThe paper's phenotyping experiments use the publicly available Ginger Leaf Dataset (RGB leaf images of four ginger leaf conditions), with a public GitHub repository and dataset website. The authors' derived ExG/pseudo-thermal representations and preprocessing scripts are only available upon request, so they do not yetDataset · publicor multispectral images
IEEE Geosci. Remote Sens. Lett. 2025
10.1109/LGRS.2025.XXXXXXX
Ulku, I., Tanriover, O. O. & Akagündüz, E. Cross-band correlation-aware interactive fusion for multispectral images. IEEE Geosci. Remote Sens. Lett.
10.1109/LGRS.2025.XXXXXXX
(2025).
10. Wong, J. Ginger Leaf Dataset. GitHub Repository (2023). https://github.com/wongjay1941/Ginger-Leaf-Dataset
11.
Bhakta I
A novel plant disease prediction model based on thermal images using modified deep convolutional neural network
Precis. Agric. 2023 24 23 39
10.1007/s11119-022-09927-x
Bhakta, I. et al. A novel plant disease prediction model based on thermal images using modified deep convolutional neural network. Precis.Open asset ↗https://github.com/wongjay1941/Ginger-Leaf-Datasetlines:580-681Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Introduction Colorimetric analysis of food using the CIELab/Ch colour space (i.e., from digital images of samples) is an accessible, non-destructive method for carotenoid and anthocyanin content prediction. Literature presents very well-fit, but rudimentary, models for pigment estimation (e.g., single/multiple linear regressions). However, standardised methods that statistically account for the high multicollinearity between CIELab/Ch colour parameters, varying light conditions and colour calibration, and samples with high genotypic variability are lacking. Methods An image analysis optimisation was developed for the prediction of carotenoid and anthocyanin content of 16 carrot genotypes of different colours. Samples were photographed under six light conditions with a digital camera and image colour was calibrated before analysis with the CIELab/Ch colour space. Total pigment contents and individual carotenoid contents were analysed chemically via spectrophotometry and high-performance liquid chromatography, respectively. Partial least squares (PLS) regressions were used to assess the colour-pigment relationships to correct for high multicollinearity amongst the independent variables (CIELab/Ch colour parameters). Results/discussion The PLS models achieved satisfactory accuracy for the prediction of total carotenoid content ( ca. R 2 = 0.77) and total anthocyanin content ( ca. R 2 = 0.81) under all light conditions. The two models are suggested as robust approaches to total pigment prediction with multi-dimensional colour spaces, varying light conditions, and for a sample group of high genotypic variability. The carrot samples proved to have very high genetic diversity within each cultivar, resulting in unsatisfactory models for prediction of individual carotenoids ( ca. R 2 = 0.45) under the default light condition. However, all the results can be used to expand databases (towards artificial intelligence) and aid breeding programmes in search for higher concentrations of these interesting antioxidants for human health.
Why it matches plant phenotyping methodsニンジン試料の画像色解析を最適化し、化学分析値を用いてカロテノイド・アントシアニン含量を予測する手法を開発・検証しており、植物形質取得が研究の中心である。
abstractThe PLS models achieved satisfactory accuracy for the prediction of total carotenoid content ( ca. R 2 = 0.77) and total anthocyanin content ( ca. R 2 = 0.81) under all light conditions.
Reproduction assets foundThe authors deposited the paper's data and protocols in public repositories (DOI links in the Data availability statement). The anthocyanin quantification protocol is explicitly linked (10.34894/BTPTSV), and the other two DOIs (10.34894/P37WCL, 10.34894/OUURRH) are stated to hold the paper's data. No separate author's'Dataset · publicData and protocols are available in the following links: https://doi.org/10.34894/P37WCL , https://doi.org/10.34894/OUURRH , https://doi.org/10.34894/BTPTSV .Open asset ↗10.34894/P37WCLlines:641-686Dataset · publicData and protocols are available in the following links: https://doi.org/10.34894/P37WCL , https://doi.org/10.34894/OUURRH , https://doi.org/10.34894/BTPTSV .Open asset ↗10.34894/OUURRHlines:641-686Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Introduction: Wheat kernel hardness, vitreousness, and creaseness are key determinants of milling performance, yet they reflect different physical scales of grain structure and are not necessarily coupled. Methods: We developed a digital phenotyping framework based on hyperspectral imaging and spectral unmixing to quantify these traits at both kernel and cultivar levels in a diverse panel of common wheat. Pixel-level spectral unmixing resolved glassy, intermediate, and mealy endosperm components within individual kernels, enabling vitreousness to be expressed as a continuous spatial index. Results: The hyperspectral-derived vitreousness index showed moderate associations with kernel protein content and the protein-to-starch ratio, consistent with variation in endosperm packing density, but weak relationships with kernel hardness and crease geometry. Kernel hardness, primarily determined by puroindoline genotype, showed limited association with bulk protein and starch composition. Crease geometry, quantified using composite indices from RGB images, captured macroscopic grain features largely independent of both hardness and vitreousness. Discussion: These results demonstrate that hardness, vitreousness, and creaseness represent complementary but largely independent dimensions of grain quality, corresponding to molecular-scale adhesion, mesoscale packing, and macroscopic geometry, respectively. The proposed framework provides a scalable, non-destructive approach for resolving intra-kernel heterogeneity, enabling improved digital phenotyping for wheat breeding and quality assessment.
Why it matches plant phenotyping methodsハイパースペクトル画像とスペクトルアンミキシングを用いて小麦粒の硝子質を定量するデジタル表現型解析フレームワークを開発しており、形質取得手法が中心的である。
abstractWe developed a digital phenotyping framework based on hyperspectral imaging and spectral unmixing to quantify these traits at both kernel and cultivar levels in a diverse panel of common wheat.
Reproduction assets foundThe paper's data availability statement deposits full hyperspectral image cubes and RGB image datasets on Figshare, and the supplementary material includes Python analysis scripts (Supplementary Code S1–S2) and processed feature tables (Supplementary Table S3) directly reproducing the paper's phenotyping measurements.Dataset · publicfull hyperspectral image cubes and associated RGB imagedatasets are available via Research Datas 1 – 3 at Figshare: https://doi.org/10.6084/m9.figshare.31259530Open asset ↗Figshare · 10.6084/m9.figshare.31259530lines:151-201Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
AppleField / plotRGB / grayscaleFruitClassificationObject detectionSegmentationGrowth / development / phenology
This article presents a comprehensive dataset of 1406 RGB images of apples ( Malus domestica ), covering three key growth stages-immature (green), semi-mature (color transition), and mature (red). The dataset serves as a resource for detecting and segmenting apples across different developmental phases. Each image includes pixel-level instance segmentation masks annotated in JSON format using the VGG Image Annotator (VIA), ensuring compatibility with deep learning frameworks. The dataset's real-world variability-spanning lighting conditions, occlusions, and clustered fruit arrangements-enhances its utility for training generalizable computer vision models in precision agriculture. It supports tasks such as fruit detection, segmentation and growth-stage classification, addressing the scarcity of annotated data for transitional maturity phases. With 2574 annotated apple instances, this dataset facilitates research on maturity grading and transfer learning for agricultural robotics. By standardizing annotations and incorporating diverse field conditions, this dataset reduces preprocessing overhead and accelerates the development of deployable AI solutions for orchard management. It is particularly valuable for improving model robustness in heterogeneous environments, thereby advancing data-driven horticultural practices.
Why it matches plant phenotyping methodsリンゴ果実の発育段階・成熟度という植物器官の状態を対象に、画素単位アノテーション付き画像データセットを構築しており、観測・抽出手法の再利用可能な基盤が中心である。
abstractThis article presents a comprehensive dataset of 1406 RGB images of apples ( Malus domestica ), covering three key growth stages-immature (green), semi-mature (color transition), and mature (red).
Reproduction assets foundThe paper is a data descriptor for a public apple image dataset (1406 RGB images, pixel-level instance segmentation masks in JSON) deposited on Mendeley Data with a direct URL and DOI, matching the allowed URL exactly.Dataset · publicRepository name: Wang, Dandan; Wang, Bo (2026), “A Multi-Stage, Pixel-Level Annotated Apple Dataset for Precision Agriculture Research”, Mendeley Data, V4
Data identification number: 10.17632/gfcmdbvw65.4
Direct URL to data:https://data.mendeley.com/datasets/gfcmdbvw65/4Open asset ↗Mendeley Data · 10.17632/gfcmdbvw65.4html-lines:1-97Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
Accurate and reproducible assessment of foliar disease severity is essential for evaluating the performance of heterogeneous plant communities and understanding host-pathogen interactions. However, traditional visual scoring methods remain subjective, with limited precision, and difficult to scale in large phenotyping experiments. Here, we present a semi-automated image analysis workflow designed to quantify multiple foliar disease symptoms simultaneously on wheat flag leaves sampled from varietal mixtures. The workflow combines three methodological components: (i) a standardized protocol for leaf sampling and imaging, (ii) supervised machine learning segmentation using Random Forest implemented in Ilastik to classify multiple symptoms (powdery mildew and yellow rust), and (iii) a graphical user interface facilitating pipeline deployment by non-specialist operators. To evaluate the influence of image representation on classification performance, four color spaces (RGB, HSV, HLS, LAB) were systematically compared. The approach was validated using images of durum wheat flag leaves collected from a field experiment assessing eight-way varietal mixtures under natural fungal pressure. Cross-validation against manually annotated images demonstrated high segmentation accuracy across all symptom. Comparison among color spaces revealed only minor differences in performance. Overall, this workflow offers a cost-effective, annotation-efficient and reproducible alternative to deep learning approaches, leveraging open-source and actively maintained tools while requiring limited training data and enabling objective, reproducible and scalable disease phenotyping.
Why it matches plant phenotyping methods葉の病害症状を画像解析で定量化するワークフローを開発し、色空間比較と手動アノテーションによる検証を行っており、植物表現型取得法が中心である。
abstractwe present a semi-automated image analysis workflow designed to quantify multiple foliar disease symptoms simultaneously
Reproduction assets foundThe paper's authors explicitly state that all code implementing the leaf disease quantification workflow (SegLeaf, including the graphical interface and documentation) is hosted in a public GitHub repository. No separate public phenotype dataset or trained model checkpoint is described in the supplied blocks.Code · publicted by the Agence Nationale de
la Recherche (ANR) (project SCOOP, grant no. ANR-19-CE32-0011; and project MOBIDIV,
grant no. ANR-20-PCPA-0006).
Code and Data Availability
The method and associated scripts developed in this work are freely available to the re-
search community. All code is hosted in a public GitHub repository at https://github.com/titouanlegourrierec/SegLeaf, which includes the full implementation of the method includ-
ing the graphical interface and documentation to guide users through the analysis pipeline.
15
.
CC-BY 4.0 International license
made available under a
(which was not certified by peer review) is the author/funder, who has granted bioRxiv a license to display tOpen asset ↗titouanlegourrierec/SegLeafpdf-raw-page:15 lines:1-39Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Abstract Timely and accurate plant disease detection is important for enhancing agricultural productivity and promoting sustainability. The study introduces Multimodal Adaptive Fuzzy-based Deep Neural Network (MAF-DNN) for classification of plant diseases. The proposed method combines fuzzy logic with multimodal data fusion to effectively address the complex interactions and uncertainties in agricultural datasets. The MAF-DNN employs a robust adaptive fuzzy framework with dynamic rule optimization and integrates Hyperspectral Imaging Data (HID) with RGB imaging data to acquire detailed spectral information and high-resolution visual cues for disease classification. The multimodal fusion enhances the model’s ability to capture intricate patterns that relate to plant health, improving the accuracy of disease classification. The experimental results showed that the MAF-DNN outperforms traditional models by achieving an accuracy of 97.8%, precision of 96.5%, recall of 98.2%, and F1-score of 97.3%. Additionally, the adaptive design reduces computational overhead, increases efficiency, and improves scalability for large-scale agricultural applications. The MAF-DNN represents a significant advancement in plant disease classification and provides a robust and efficient solution for precision agriculture.
Why it matches plant phenotyping methods植物病徴を画像から分類するマルチモーダル画像・深層学習手法の開発と性能評価が中心であり、植物の病害状態を直接推定するため。
abstractThe study introduces Multimodal Adaptive Fuzzy-based Deep Neural Network (MAF-DNN) for classification of plant diseases.
Reproduction assets foundThe paper uses two public Kaggle plant disease image datasets (New Plant Diseases Dataset and CCMT Plant Disease Dataset) as its phenotyping inputs and states that the authors' custom MAF-DNN code is publicly available on GitHub, with all three URLs given in the article and matching allowed URLs.Code · publicThe custom code used to develop and evaluate the proposed Multimodal Adaptive Fuzzy Deep Neural Network (MAF-DNN) framework is publicly available at: https://github.com/skbsangeetha/MAF-DNN-Plant-disease-classificationOpen asset ↗skbsangeetha/MAF-DNN-Plant-disease-classificationhtml-lines:102-118Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 5 Sept 2026
Latest imaging technologies play a vital role in the extraction of plant phenotypic traits in high ranges. Most existing analytical methods treat these traits as independent features, overlooking the complex interaction patterns that focus on plant responses to environmental stress. Proposed Perceptual Graph Kernel (PGK) framework model address the limitation in terms of image-derived phenotypic traits plat information graph structured interaction networks leverages perceptual similarity learning to capture higher-order phenotypic patterns. In the PGK framework, traits extracted from RGB (Red, Green, Blue) and multispectral imagery are encoded as nodes, and biologically meaningful relationships amongst trait pairs are represented as weighted edges. Extracted trait values are continuously transformed into perceptual states to enhance biological interpretability, and a graph kernel is employed to measure similarity between trait graphs. Experiments performed in an agricultural field with a precision agriculture dataset for plant stress phenotyping demonstrated that the proposed PGK achieved 93.8% classification accuracy, improving performance by 5.3 percentage points over the CNN baseline. The outcome results clearly highlight the effectiveness of the perceptual graph model for plant phenotyping and provide a robust, interpretable computational framework for sustainable crop monitoring and decision-support in precision agriculture.
Why it matches plant phenotyping methods画像由来の植物形質を抽出・関係グラフ化し、ストレス表現型分類を行う計算手法が研究の中心であるため。
abstractProposed Perceptual Graph Kernel (PGK) framework model address the limitation in terms of image-derived phenotypic traits
Reproduction assets foundThe paper's Data Availability Statement points to a public GitHub repository (marathonengineer/Agriproject) containing the datasets used in this plant stress phenotyping study. The other allowed URL (PlantCV) is a generic phenotyping library, not a paper-specific asset.Dataset · publicThe datasets used in this study are available in publicly accessible online repositories. The repository can be accessed at: https://github.com/marathonengineer/Agriproject.Open asset ↗marathonengineer/Agriprojecthtml-lines:589-657Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Climate change-induced drought increasingly constrains water management in mixed-species urban gardens, requiring scalable and non-destructive approaches. This study proposes an integrated framework combining chlorophyll fluorescence, RGB image indices, and machine learning to classify plant drought response patterns. Ten garden plant species were evaluated under varying soil moisture conditions. Hierarchical cluster analysis integrating fluorescence parameters and RGB indices identified three physiologically defined response clusters, and their reproducibility using RGB indices alone was assessed. A total of 1,629 samples were augmented to 1,881 using the synthetic minority over-sampling technique (SMOTE) to address class imbalance. A support vector machine (SVM) model with a radial basis function kernel, using green leaf index (GLI), normalized green-red difference index (NGRDI), blue-green pigment index (BGI), and soil moisture (%) as predictors, achieved an accuracy of 0.91 and a Kappa coefficient of 0.84. In contrast, PLS-DA showed lower performance (accuracy 0.79, Kappa 0.65), indicating limited separability under linear assumptions. These results demonstrate that RGB indices combined with nonlinear models were able to reproduce physiologically defined drought response patterns under the given conditions. As a proof of concept, this study demonstrates the potential of the proposed framework; however, its generalizability is limited by the controlled greenhouse setting, the relatively small number of species, and the lack of external validation in heterogeneous field environments. The framework may provide a cost-effective approach for classifying plant drought responses and has the potential to support the grouping of plants with similar water requirements, which could contribute to improved irrigation management in mixed-species gardens under further validation.
Why it matches plant phenotyping methodsRGB画像指標と機械学習により、植物の干ばつ応答パターンという生理状態を分類し、蛍光測定との再現性を評価しているため、表現型取得・抽出手法が中心です。
abstractThis study proposes an integrated framework combining chlorophyll fluorescence, RGB image indices, and machine learning to classify plant drought response patterns.
Reproduction assets foundThe paper explicitly states that the authors' analysis code (data processing, feature extraction, SVM/PLS-DA modeling) is publicly deposited on Zenodo with a DOI matching an allowed URL. The phenotype datasets are only said to be in the manuscript/supplementary files, so the code deposit is the qualifying paperSpecificCode · publicThe code supporting the findings of this study, including data processing, feature extraction, and machine learning modeling is available at Zenodo: https://doi.org/10.5281/zenodo.19127295 .Open asset ↗Zenodo · 10.5281/zenodo.19127295lines:98-116Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
Accurate plant segmentation in thermal imagery remains a significant challenge for high throughput field phenotyping, particularly in outdoor environments where low contrast between plants and weeds and frequent occlusions hinder performance. To address this, we present a framework that leverages synthetic RGB imagery, a limited set of real annotations, and GAN-based cross-modality alignment to enhance semantic segmentation in thermal images. We trained models on 1128 synthetic images containing complex mixtures of crop and weed plants in order to generate image segmentation masks for crop and weed plants. We additionally evaluated the benefit of integrating as few as 20 real, manually segmented field images within the training process using various sampling strategies. When combining all the synthetic images with a few labeled real images, we observed a maximum relative improvement of the mean IoU score of 25% compared to the synthetic-only baseline. Cross-modal alignment was enabled by translating RGB to thermal using CycleGAN-Turbo, allowing robust template matching without calibration. Results demonstrated that combining synthetic data with limited manual annotations and cross-domain translation via generative models can significantly boost segmentation performance in complex field environments for multi-model imagery.
Why it matches plant phenotyping methods熱画像における作物・雑草の分割を対象とし、合成データ、少数の実画像、GANによるモダリティ間整合を用いた高スループット圃場フェノタイピング手法を開発・評価しているため。
abstractAccurate plant segmentation in thermal imagery remains a significant challenge for high throughput field phenotyping
Reproduction assets foundThe paper's real annotated cowpea segmentation images and its synthetic Helios-generated training imagery are both publicly available on Hugging Face per the Data Availability statement. No author analysis code repository with explicit deposit language is provided (Helios and AgML are generic third-party tools, not theDataset · publicendix A
Supplementary data to this article can be found online at https://doi.org/10.1016/j.plaphe.2026.100214 .
Appendix A.
Supplementary data
The following is the Supplementary data to this article:
Multimedia component 1
Data availability
Data can currently be accessed through Huggingface [ 75 ]. The real data is found here: https://huggingface.co/datasets/earlranario/cowpea-segmentation . The synthetic data is found here: https://huggingface.co/datasets/earlranario/cowpea-synthetic-segmentation .Open asset ↗earlranario/cowpea-segmentationlines:341-366Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
ABSTRACT Lodging is a major contributor to decreased yield in tef, a staple cereal crop in Ethiopia. Semidwarf varieties have been developed with a goal to increase yield through reduced lodging, but studying lodging susceptibility currently requires a labor‐intensive, imprecise, manual scoring method. Here we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event. We compare 3D point clouds generated by photogrammetry from RGB images with those generated from LiDAR to estimate height, demonstrating that they produce similar results, despite differences in cost. Stand height and lodging can both be accurately measured with low‐cost UAS, reducing the need for manual measurements and increasing precision and temporal resolution in plant breeding programs.
Why it matches plant phenotyping methodsUAS画像・LiDARによるテフの草高と倒伏程度の推定ワークフローを開発・比較し、育種での測定精度向上を示す中心的な表現型計測研究。
abstractHere we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event.
Reproduction assets foundThe paper's Data Availability Statement and Methods sections point to a public GitHub repository containing the authors' analysis code and associated data (including PheNode sensor data), plus the PlantCV-Geospatial package used for the RGB/LiDAR height and lodging analysis.Code · publicthe USDA NIFA AFRI (Grant Number
2022-
67021-
36467 to N.F.), and by the Bellwether Foundation.
Conflicts of Interest
Getu Beyene has patent “Lodging resistance in Eragrostis tef” pending
to Donald Danforth Plant Science Center.
Data Availability Statement
Code and data associated with this manuscript are available on GitHub
(https://github.com/danforthcenter/teff-manuscript).References
Abebe, Y., A. Bogale, K. Michael Hambidge, B. J. Stoecker, and R. S.
Gibson. 2007. “Phytate, Zinc, Iron and Calcium Content of Selected Raw
and Prepared Foods Consumed in Rural Sidama, Southern Ethiopia,
and Implications for Bioavailability.” Journal of Food Composition and
Analysis 20, no. 3: 161–168.
AssOpen asset ↗danforthcenter/teff-manuscriptpdf-raw-page:8 lines:1-98Code · publicyzing images of plants (Gehan
et al. 2017; Schuhl et al. 2026) that provides a framework for
measuring and storing observations extracted per object within
each image. All code associated with these analyses is available
on GitHub (https://github.com/danforthcenter/teff-manuscript),
as well as the PlantCV-
Geospatial package (https://github.com/danforthcenter/plantcv-geospatial). As observed in the ortho-
mosaic (Figure 1A), tef plots were planted under power lines in
the field, which could not be flown under due to UAS safety re-
strictions. Pixels belonging to powerlines needed to be removed
to measure plot heights. During import, PlantCV-
Geospatial
was used with a height percentile tOpen asset ↗danforthcenter/plantcv-geospatialpdf-raw-page:4 lines:1-107Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
This paper addresses the problem of automated segmentation of plant green biomass in field crop images aimed at improving the accuracy of crop and weed identification. To construct a training dataset for neural network models, an automatic annotation algorithm is proposed, enabling the generation of polygonal object masks without human intervention. The method is based on adaptive analysis of color characteristics of plant fragments with iterative narrowing of the hue range in the HSV color space, combined with an integral quality metric that accounts for the dynamics of contour area and shape. The proposed method achieved an IoU of 93.22% and a DSC of 96.30%, demonstrating a high level of agreement between automatic and manual annotations. The generated masks are used to train segmentation models of the YOLO11-seg family. Models of different scales (n, s, m, l, x) were trained and evaluated using standard metrics, including Intersection over Union (IoU), mAP@0.5, mAP@0.5–0.95, F1-score, and Precision–Recall (PR) curves. Experimental results demonstrate that models trained on automatically generated annotations achieve stable segmentation performance of plant green biomass. The best results were obtained with the YOLO11m-seg model, achieving an F1-score of 0. 772. The results confirm the effectiveness of the proposed approach and demonstrate acceptable segmentation quality, supported by both quantitative metrics and visual analysis. The developed automatic annotation algorithm can be used to expand training datasets in computer vision tasks for agricultural applications.
Why it matches plant phenotyping methods植物の緑色バイオマスを画像から自動抽出するポリゴン注釈法を開発し、手動注釈との一致度で検証しているため、植物表現型取得・抽出法が中心である。
abstractan automatic annotation algorithm is proposed, enabling the generation of polygonal object masks without human intervention
Reproduction assets foundThe authors publicly released the paper-specific generated dataset of polygonal segmentation annotations (masks and supporting materials) on Hugging Face. CVAT is only a generic annotation tool, and no author analysis code or trained model checkpoints are explicitly deposited.Dataset · publicThe generated dataset with polygonal segmentation annotations of crop and weed plants, produced using the proposed algorithm and based on the LincolnBeet Dataset, is publicly available on Hugging Face at: https://huggingface.co/datasets/ivliev123/polygonal_marking_plant_objectsOpen asset ↗Hugging Face · ivliev123/polygonal_marking_plant_objectshtml-lines:438-462Code / dataset availability confirmedCrossref · checked 14 Sept 2026
The decline in environmental quality caused by industrial pollution and climate change has weakened the natural resistance of rice plants (Oryza sativa), increasing their susceptibility to various diseases. Conventional disease identification methods that rely on manual observation are often limited by subjectivity and human visual constraints. This study proposes a deep learning–based system for automatic rice leaf disease classification using the You Only Look Once version 8 (YOLOv8) architecture. The model was trained using a publicly available rice leaf image dataset consisting of 6,889 images categorized into eight classes: Bacterial Leaf Blight, Brown Spot, Leaf Blast, Leaf Scald, Sheath Blight, Narrow Brown Leaf Spot, Rice Hispa, and Healthy Rice Leaf. The research methodology includes image pre-processing, data augmentation, dataset splitting, and training using the YOLOv8n-cls model for 50 epochs. Experimental results demonstrate high classification performance with an accuracy of 99.5%, precision of 99%, recall of 98%, and an F1-score of 0.99. The trained model was then deployed into a web-based application that allows users to upload rice leaf images and obtain real-time disease classification results. The proposed system provides a practical tool to support early detection of rice plant diseases and assist farmers in improving crop management in modern agriculture.
Why it matches plant phenotyping methodsイネ葉画像から病害状態を推定するYOLOv8画像解析手法の開発と性能評価が中心であり、植物病害フェノタイピングに該当する。
abstractThis study proposes a deep learning–based system for automatic rice leaf disease classification using the You Only Look Once version 8 (YOLOv8) architecture.
Reproduction assets foundThe paper's rice leaf disease image dataset (6,889 images, eight classes) used for YOLOv8n-cls training is a publicly available Kaggle dataset cited by the authors with an explicit URL. No author code, trained model, or other paper-specific assets are reported.Dataset · publicThe primary dataset was obtained from a
publicly available dataset on Kaggle [16], which provides a
comprehensive collection of rice leaf disease images for
machine learning research.Open asset ↗Kagglepdf-raw-page:3 lines:1-102Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Phenotyping plant traits using UAV-based multispectral imaging offers a robust and unbiased approach to assessing crop status. With approximately 70% of smallholder farmers in East and Southern Africa cultivating common beans as a key source of food and income, there is a critical need for accurate and timely measurements of crop health and yield to support data-driven management decisions and disease mitigation. Traditional phenotyping methods are labor-intensive, and existing remote sensing and machine learning approaches remain limited. This study presents a comprehensive framework for plot-level assessment of common bean health and yield using time-series RGB and multispectral imagery. Data collected over three growing seasons (2022–2024) were used to extract canopy variables and vegetation indices (VIs) across phenological stages. For yield prediction, traditional machine learning models achieved a root mean squared error (RMSE) of 242.33 kg ha⁻¹ and an R² of 0.66 using an Extra Trees Regressor. A novel BY-GRU architecture improved performance, achieving an RMSE of 242.40 kg ha⁻¹ and an R² of 0.79. The analysis also identified 45–60 days after sowing as the optimal window for prediction. To address limitations in conventional plant health assessments, this study introduces a novel Health Index. Comparative analysis demonstrated its robustness across genotypes and stronger correlation with yield. Machine learning and deep learning models, including MaxViT, were applied to estimate the Health Index, achieving improved predictive performance. Overall, this work integrates UAV sensing and modelling to provide scalable tools for phenomics, crop management, and breeding.
Why it matches plant phenotyping methodsUAVのRGB・マルチスペクトル画像から作物の健康状態、収量、キャノピー形質を推定するセンシング・機械学習フレームワークが研究の中心であり、植物フェノタイピング手法として適格です。
abstractThis study presents a comprehensive framework for plot-level assessment of common bean health and yield using time-series RGB and multispectral imagery.
Reproduction assets foundThe preprint's DATA AVAILABILITY section states that all processed data required to reproduce the results are publicly available in a Google Drive repository, which qualifies as a paper-specific public phenotype dataset asset. No author analysis code or trained model checkpoints are explicitly deposited.Dataset · publicCommon Bean Breeding Program for
facilitating field trials. We also thank the Phenomics team for their valuable assistance with UAV-based
data collection.
CONFLICT OF INTEREST
The authors declare no conflict of interest.
DATA AVAILABILITY
The datasets generated and/or analyzed during the current study are publicly available at:
https://drive.google.com/drive/folders/1fN3Q9n3bK_YoXFK8VFKZ3uEb13y9iRWj?usp=sharing. This
repository includes all processed data required to reproduce the results presented in this study.
SUPPLEMENTAL MATERIAL
Supp. Figure 1. Drone-based field view of the bean trial site at CIAT Palmira Research Station: A) RGB
image and B) NDVI image.
Supp. Figure 2. Drone Features Open asset ↗pdf-raw-page:40 lines:1-46Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 5 Sept 2026
Effective high-throughput phenotyping is crucial for modern plant breeding, yet the optimal image acquisition parameters for UAV-based systems in forage crops remain poorly defined. We optimized UAV-based phenotyping methods for a Megathyrsus maximus biparental population, examining how ground sampling distance (GSD), environment, and harvest date affect the accuracy of RGB-derived digital traits in predicting yield and canopy height. Machine learning algorithms and mixed model analyses were applied to evaluate predictive power and heritability. Pixel count and Haralick's entropy showed strong correlations with conventional yield measurements, particularly in Environment 2, while most vegetative indices were poor predictors. Integrating machine learning substantially enhanced predictive power for green and dry matter yield (r > 0.80). For canopy height, machine learning models achieved correlations of 0.71 with ground truth measurements despite weak pairwise correlations. Mixed model analysis revealed high broad-sense heritability (0.7 < H 2 < 0.87) for yield traits, pixel count, and entropy, while vegetative indices and canopy height showed greater environmental susceptibility. Moderate GSD resolutions (0.5–1.0 cm) consistently outperformed both very high (0.27 cm) and very low (1.5 cm) resolutions. Coincidence index analysis demonstrated 80% correspondence between top genotypes ranked by pixel count and conventionally measured dry matter yield. This study provides an optimized framework for UAV-based phenotyping in M. maximus , demonstrating that combining advanced digital traits with machine learning accurately predicts key agronomic traits and significantly enhances genotype selection efficiency in forage breeding programs.
Why it matches plant phenotyping methodsUAV画像取得条件、RGBデジタル形質、機械学習による収量・草高推定を最適化・検証する研究であり、植物表現型取得法が中心的です。
abstractWe optimized UAV-based phenotyping methods for a Megathyrsus maximus biparental population, examining how ground sampling distance (GSD), environment, and harvest date affect the accuracy of RGB-derived digital traits in predicting yield and canopy height.
Reproduction assets foundThe paper's data availability statement points to a public Mendeley Data repository containing the study's UAV-derived digital phenotyping and conventional trait datasets. No author analysis code repository is explicitly deposited.Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://data.mendeley.com/datasets/jrrb76x82h/1 .Open asset ↗jrrb76x82h/1lines:435-487Code / dataset availability confirmedEurope PMC · Crossref · checked 15 Sept 2026
Abstract Current phytopathological diagnostic systems rely on manual inspections or laboratory analyses, which delay early detection and limit in-field responsiveness. Phytopathogenic fungal diseases pose a persistent threat to food security, directly affecting the productivity of essential crops such as potato ( Solanum tuberosum ) and tomato ( Solanum lycopersicum ) [1]–[5]. Among these diseases, Phytophthora infestans , the causal agent of late blight, is characterized by its high virulence and rapid spread, capable of generating significant losses in short periods when detection occurs too late [3], [4]. To address this issue, a computer vision and deep learning–based system for multistage detection of fungal infections in potato and tomato crops is proposed. The system comprises a convolutional neural network optimized for edge processing and a mobile robotic platform equipped with a manipulator arm for localized treatment application. The developed model was deployed on a Raspberry Pi 4 connected to a 12-MP Raspberry Pi Camera Module 3 NoIR, responsible for acquiring RGB images in the field. The proposed network was compared with reference architectures—ResNet-50, VGG16, MobileNetV2, and Inception-v3—within a four-stage detection pipeline: crop identification, health-state classification, infection diagnosis, and foliar severity estimation. A dataset of 18,200 images obtained from publicly accessible online sources, under diverse lighting and background conditions, was used, partitioned into 70% for training, 20% for validation, and 10% for testing. Preliminary results show an average accuracy in the range of 0.90–0.92, with inference latencies below 60 ms per image, ensuring smooth performance on the Raspberry Pi 4 without requiring cloud connectivity. Additionally, the network demonstrated higher sensitivity to visual variations compared to the baseline models.
Why it matches plant phenotyping methods植物病害の健康状態・感染・葉面重症度を画像から推定するコンピュータビジョン手法を開発・比較検証しており、植物表現型取得が中心である。
abstracta computer vision and deep learning–based system for multistage detection of fungal infections in potato and tomato crops is proposed
Reproduction assets foundThe paper's CNN training data are two publicly available third-party plant-disease image datasets (Mendeley Data and Kaggle Plant Village) with explicit URLs in the Data Availability Statement. The authors' field-test images and experimental records are only available on request, and no analysis code or trained model/сDataset · public10
Network, DOI: 10.17632/tywbtsjrjv.1, available at
https://data.mendeley.com/datasets/tywbtsjrjv/1, and the
Kaggle Plant Village dataset, available at
https://www.kaggle.com/datasets/emmarex/plantdisease.The field-test images and experimental records generated during
the current study during the real-world evaluation of the
embedded-vision system are available from the corresponding
author on reasonable request.
IX. REFERENCOpen asset ↗10.17632/tywbtsjrjv.1pdf-raw-page:11 lines:1-98Dataset · public10
Network, DOI: 10.17632/tywbtsjrjv.1, available at
https://data.mendeley.com/datasets/tywbtsjrjv/1, and the
Kaggle Plant Village dataset, available at
https://www.kaggle.com/datasets/emmarex/plantdisease.The field-test images and experimental records generated during
the current study during the real-world evaluation of the
embedded-vision system are available from the corresponding
author on reasonable request.
IX. REFERENCES
[1] P. W. Crous, A. Y. Rossman, M. C. Aime, W. C. Allen, T.
Burgess, J. Z. Groenewald y L. A. CastlebuOpen asset ↗Kagglepdf-raw-page:11 lines:1-98Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
The quality of forest reproductive material is crucial for successful reforestation and afforestation. While physical seed properties like mass are known indicators of quality, the potential of non-destructive, rapid color analysis for predicting germination in coniferous species requires further exploration. This study investigates the relationship between the seed coat color of individual Pinus sylvestris seeds, quantified in RGB (Red, Green, Blue) space using a flatbed scanner, and their subsequent germination in container nurseries. The resulting images were processed using ImageJ software to measure the mean pixel intensity (0–255) for the Red (R), Green (G), and Blue (B) channels from the segmented seed area, following the «seed–culture» passport methodology [Forestry Engineering Journal 14 | 55 (2024), 37–60]. From a population of individually tracked seeds, we compared the RGB values of germinated (N = 942) and non-germinated (N = 258) seeds after 30 days. Results from the Kolmogorov-Smirnov test showed that non-germinated seeds had significantly lower individual mass (p = 0.0045) and significantly higher pixel brightness values in the R-, G-, and B-channels (p < 0.0001) compared to germinated seeds. Normalized RGB indices also showed significant differences between groups. Our findings demonstrate that seeds with a lighter, more reflective epidermis – indicative of higher RGB brightness – are statistically associated with a lower probability of successful germination under container nursery conditions. This non-destructive, low-cost method shows significant promise for the rapid pre-sorting of Scots pine seeds. It offers a practical tool to improve the efficiency and predictability of seedling production in forest nurseries by increasing the proportion of viable seeds in sowing batches.
Why it matches plant phenotyping methods個別種子のRGB画像から種皮色を定量抽出し、発芽予測・事前選別に用いる非破壊的な表現型計測法が研究の中心である。
abstractthe potential of non-destructive, rapid color analysis for predicting germination in coniferous species requires further exploration
Reproduction assets foundThe paper openly deposits its three core phenotyping datasets in Mendeley Data: morphometric seed data (Dataset 1), the raw VIS/RGB scanner images of individual Pinus sylvestris seeds (Dataset 2), and germination outcome data (Dataset 3). All three DOIs are listed in the Data Availability statement and match allowed URDataset · publicThe original morphometric data—Dataset 1—of Pinus sylvestris L. are openly available in Mendeley Data at DOI: https://doi.org/10.17632/8g258nbgmf.1Open asset ↗Mendeley Data · 10.17632/8g258nbgmf.1lines:133-160Dataset · publicThe original VIS image data of Pinus sylvestris L. are openly available in Mendeley Data at DOI: https://doi.org/10.17632/dt78jhyw2j.2Open asset ↗Mendeley Data · 10.17632/dt78jhyw2j.2lines:133-160Dataset · publicThe original germination data—Dataset 3—are openly available in Mendeley Data at DOI : https://doi.org/10.17632/hrs3fgc8tt.1Open asset ↗Mendeley Data · 10.17632/hrs3fgc8tt.1lines:133-160Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
RGB / grayscaleFlowerClassificationGrowth / development / phenology
This study presents a comprehensive BDFlower growth stage dataset designed to support research in precision agriculture and floriculture. The dataset encompasses eight common flower species found in Bangladesh: Bush Allamanda, Red Hibiscus, Yellow Bell, Pinwheel Flower, Pink Periwinkle, White Madagascar Periwinkle, Marvel of Peru, and White Hibiscus. Each species is represented across three growth stages-Early, Mid, and Full-resulting in 24 distinct classes. A total of 23,334 colour images are included, comprising 3889 original photographs and 19,445 augmented samples generated with five augmentation techniques. Bush Allamanda contains 499 images, Red Hibiscus contains 489 images, Yellow Bell contains 483 images, Pinwheel Flower contains 497 images, Pink Periwinkle contains 452 images, White Madagascar Periwinkle contains 472 images, Marvel of Peru contains 468 images and White Hibiscus contains 529 images. Each image was collected using smartphone camera at three-time intervals per day, spaced eight hours apart, to capture natural variations in lighting and appearance. The dataset is further organized into training, validation, and testing splits, enabling direct application to machine learning workflows. This is a publicly available dataset specifically curated for flower growth stage classification. In addition to dataset collection, we also conducted a simple experiment using a CNN model to evaluate its performance on this dataset. It is intended to facilitate the development of robust computer vision models that can monitor flower development, with potential applications in automated plant phenotyping, crop monitoring, and digital floriculture systems.
Why it matches plant phenotyping methods花の生育段階を画像で分類する公開データセットを構築し、CNN評価も行っており、植物表現型取得・解析が研究の中心である。
abstractThis is a publicly available dataset specifically curated for flower growth stage classification.
Reproduction assets foundThe paper's own flower growth-stage image dataset (BDFlower) is publicly deposited on Mendeley Data with an explicit direct URL and DOI, directly reproducing the paper's phenotyping (flower growth stage) image measurements. No author analysis code or trained model checkpoints are explicitly deposited.Dataset · publicRepository name: Data Mendeley
Data identification number: 10.17632/m8g2wynwyr.2
Direct URL to data: https://data.mendeley.com/datasets/m8g2wynwyr/2Open asset ↗10.17632/m8g2wynwyr.2html-lines:94-129Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
This dataset consists of a collection of high-resolution RGB images of grapevine leaves, designed to support research in plant pathology, precision viticulture, and computer vision. The images were collected in situ from experimental and commercial vineyards in the north of Portugal, covering different vineyard conditions and management practices. The dataset includes healthy leaves from three grapevine Portuguese cultivars Loureiro, Viosinho and Malvasia Fina, photographed under natural lighting conditions without artificial adjustments. It is organized into five categories: healthy leaves and leaves showing symptoms of downy mildew ( Plasmopara viticola ), powdery mildew ( Erysiphe necator ), Esca complex and Erineum Mite ( Colomerus vitis ). Images are provided in JPEG format with a resolution of 3000 × 3000 pixels and 1024 × 1024 pixels and arranged in folders by health status and disease type. This dataset can be used for machine learning and deep learning applications in disease detection/classification, cultivar identification, and can support other precision agriculture applications, as well as being used for agricultural robotics and educational purposes. An evaluation on three deep learning architectures demonstrated the suitability of the dataset into separating the five classes.
Why it matches plant phenotyping methodsブドウ葉の病徴を画像化した再利用可能なデータセットで、植物の健康状態・病害状態の画像ベース推定を支えることが中心です。深層学習による5クラス分類評価も記載されています。
abstractThis dataset consists of a collection of high-resolution RGB images of grapevine leaves, designed to support research in plant pathology, precision viticulture, and computer vision.
Reproduction assets foundThe paper is a Data in Brief article describing a public Zenodo repository of RGB grapevine leaf images (healthy plus downy mildew, powdery mildew, Esca complex, erineum mite) collected for plant disease/phenotyping research, with explicit data accessibility details. No author analysis code or trained model checkpointsDataset · publicData accessibility
Repository name: Zenodo
Data identification number: https://doi.org/10.5281/zenodo.17343473
Direct URL to data: https://zenodo.org/records/17343473Open asset ↗Zenodo · 10.5281/zenodo.17343473html-lines:93-144Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
ABSTRACT 3D reconstruction has matured into a robust technology. However, small, flexible objects such as conifer seedlings remain challenging due to their fine‐scale structures, and susceptibility to movement. This study investigates and evaluates methods for reconstructing spruce ( Picea abies ) and pine ( Pinus sylvestris ) seedlings, with the aim of establishing a workflow capable of capturing geometry and texture for applications in machine learning and virtual testing environments. Two acquisition approaches were tested: photogrammetry using a RGB camera and a 3D scanner, both mounted on a robotic arm. While the scanner produced incomplete results, the photogrammetry approach successfully generated point clouds (pcl) with color information. Three different photogrammetry software were tested before relying on Agisoft Metashape and Meshroom for image processing and dense pcl generation, followed by pcl filtering in CloudCompare and meshing in Blender. Six seedlings were reconstructed to textured meshes and quantitatively evaluated using the metrics precision, recall, F1‐score, mask intersection‐over‐union (IoU), and boundary IoU. Results showed an average mask IoU of 75.7% and F1‐score of 86.1%. Pine seedlings yielded higher recall and F1‐scores, whereas spruce reconstructions demonstrated higher precision. The proposed semi‐automated workflow demonstrates the feasibility of reconstructing small and slender structured flexible objects, specifically conifer seedlings.
Why it matches plant phenotyping methods針葉樹苗の形状・テクスチャを取得する3D画像再構成ワークフローを開発・比較・定量評価しており、植物フェノタイピング手法が中心である。
abstractThis study investigates and evaluates methods for reconstructing spruce ( Picea abies ) and pine ( Pinus sylvestris ) seedlings, with the aim of establishing a workflow capable of capturing geometry and texture for applications in machine learning and virtual testing environments.
Reproduction assets foundThe paper's Data Availability Statement states that the raw seedling image data and finalized textured meshes (the paper's phenotyping/3D reconstruction inputs and outputs) are freely available on Zenodo under DOI 10.5281/zenodo.19823955, which appears in the allowed URL list.Dataset · publicand without adjusting the scanning parameters, while also re-
Data Availability Statement
taining texture and color. In contrast to prior approaches that
require manual intervention or do not preserve visual informa- Raw image data and finalized textured meshes are freely available at
Zenodo.org with https://doi.org/10.5281/zenodo.19823955.
tion, the proposed workflow enables a semi-automated recon-
struction process suitable for dataset generation. As shown, the
methodology is effective for the digital reconstruction of small References
and slender structured flexible objects and holds potential for
Abbood, S. A., H. A. Ajjah, A. H. H. Alboabidallah, M. U. MohaOpen asset ↗Zenodopdf-layout-page:14 lines:50-74Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Abstract Abstract. Accurate and timely identi cation of plant diseases is essential for improving crop productivity and ensuring sustainable agricultural practices. This paper presents a comprehensive image dataset of fruit and leaf diseases covering six economically important horticultural crops: Apple, Banana, Citrus, Guava, Mango, and Papaya. The dataset comprises high-quality RGB images representing both healthy and diseased samples, with disease symptoms including spots, lesions, discoloration, blight, rot, and fungal and bacterial infections captured under diverse real-world conditions. Variations in illumination, background complexity, viewing angles, growth stages, and symptom severity are intentionally included to enhance the robustness and generalizability of learning models developed using this data. The dataset is structured in a class-wise manner and preprocessed to support direct integration with deep learning frameworks. It is extensively used to train, validate, and evaluate deep learning based plant disease classi cation models, enabling automatic feature learning from raw images without manual intervention. Experimental usage demonstrates that the dataset is well suited for convolutional neural networks and attentionbased architectures, facilitating e ective discrimination between multiple disease categories across di erent crops and plant organs. By providing a uni ed multi-crop, multi-disease benchmark, this dataset aims to accelerate research in automated crop disease diagnosis, precision agriculture, and intelligent decision-support systems for sustainable farming.
Why it matches plant phenotyping methods植物の葉・果実の病徴画像を収録したデータセット／ベンチマークであり、病害状態の画像ベース推定を中心的に扱うため。
abstractThis paper presents a comprehensive image dataset of fruit and leaf diseases covering six economically important horticultural crops
Reproduction assets foundThe paper's core asset is the ABCGMP fruit and leaf disease image dataset, publicly deposited on Mendeley Data, with author analysis code also stated to be available on GitHub. Both are paper-specific, public, and actionable.Dataset · publicData is available on Mendeley:1Open asset ↗pdf-page:33 lines:1-56Code · publicCode availability: Code is available on GitHub 2Open asset ↗GitHubpdf-page:33 lines:1-56Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This study addresses the challenge of detecting white grape clusters (Vitis vinifera L) in high-density vineyard canopies, a critical task for precision viticulture and yield estimation. Traditional statistical and image-processing methods have struggled with occlusion issues. In this work, over 100 field RGB images were collected at La Bergonza (Toledo, Spain) and expanded through data augmentation, with various preprocessing strategies tested to enhance cluster visibility. Convolutional Neural Network (CNN) architectures were compared, highlighting YOLOv8 as superior to Mask R-CNN in both accuracy and efficiency. YOLOv8, trained for up to 100 epochs on equalized and augmented datasets, achieved outstanding performance: 84.9% precision, 72.6% recall, and mAP@0.5 of 83%, far surpassing Mask R-CNN (17% precision, 26% recall). The model successfully detected partially hidden clusters, including those invisible to human experts, better than previous studies that required controlled backgrounds or artificial lighting. Results confirm that combining RGB equalization with data augmentation optimizes detection. These findings underscore the potential of deep learning and low-cost RGB imaging systems to enable automated, scalable solutions for yield estimation and canopy analysis. In conclusion, YOLOv8 emerges as a promising tool for accurate grape bunch detection under field conditions, overcoming previous limitations.
Why it matches plant phenotyping methodsブドウ房を対象としたRGB画像とCNNによる検出手法を開発・比較し、精度を定量評価しているため、植物器官の表現型取得が中心である。
abstractIn this work, over 100 field RGB images were collected at La Bergonza (Toledo, Spain) and expanded through data augmentation, with various preprocessing strategies tested to enhance cluster visibility.
Reproduction assets foundThe paper's Data Availability Statement points to the authors' public GitHub repository containing the original grape-cluster image dataset and annotations used in this study. The ultralytics repository is a generic third-party library, not a paper-specific asset.Dataset · publicData Availability Statement: The original data presented in the study are openly available at
[https://github.com/upmValeriano/racimosUva.git.]Open asset ↗upmValeriano/racimosUvapdf-page:13 lines:1-66Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Accurate delineation of crop growth stages under real-world field conditions remains a long-standing challenge in computational phenotyping, particularly for wheat whose developmental phases are characterized by subtle, continuous morphological transitions and environmental noise. In this study, we propose AMFR-Net, an Adaptive Multi-Scale Feature Refinement Network tailored for fine-grained wheat stage identification using ground-level RGB imagery. Unlike conventional architectures that struggle with ambiguous inter-stage boundaries and rigid receptive structures, AMFR-Net leverages a ResNet-101 backbone augmented by a novel Adaptive Multi-Scale Attention Fusion (AMSAF) module-comprising cross-scale interaction blocks and confidence-weighted feature aggregation-to hierarchically recalibrate spatial-semantic representations. This design enables the network to adaptively amplify phenologically salient cues while suppressing irrelevant context, ensuring robust generalization under constrained annotation and deployment conditions. Evaluated on the expert-labeled CGIAR benchmark, AMFR-Net achieves state-of-the-art performance across all major metrics (Top-1 Accuracy: 89.10%; Macro-F1: 89.10%; AUC: 97.88%) and demonstrates superior discriminability in phenologically adjacent stages compared to lightweight and deep CNN baselines. Ablation studies validate the synergistic effect of multi-level attention and scale-aware refinement. The proposed framework offers a scalable, interpretable, and field-deployable solution for in-situ phenology monitoring, and sets a foundation for future integration of multimodal sensing, weak supervision, and cross-seasonal adaptation.
Why it matches plant phenotyping methods小麦の生育ステージを地上RGB画像から推定する新規深層学習手法を開発し、ベンチマーク、比較、アブレーションで検証しており、植物フェノタイピング手法が研究の中心です。
abstractwe propose AMFR-Net, an Adaptive Multi-Scale Feature Refinement Network tailored for fine-grained wheat stage identification using ground-level RGB imagery.
Reproduction assets foundThe paper's phenotyping analysis is built on the public CGIAR Wheat Growth Stage Challenge dataset (ground-level RGB wheat images with growth-stage labels), which the authors explicitly state is publicly available on Zindi with a direct link. No author analysis code, trained model checkpoints, or supplementary code/deeDataset · publicPublicly available datasets were analyzed in this study. This data can be found here: Dataset name: CGIAR Wheat Growth Stage Challenge Primary repository: Zindi (official competition page) Direct link: https://zindi.africa/competitions/cgiar-wheat-growth-stage-challengeAccession/Open asset ↗Zindilines:808-824Code / dataset availability confirmedOpenAlex · Europe PMC · checked 14 Sept 2026
Leaf morphology in tea plants (Camellia sinensis L.) profoundly influences tea quality and agronomic value, yet its genetic basis remains elusive due to labor-intensive phenotyping, foliage architecture, and ecological sensitivity of traits. Moreover, traditional methods forfeit quantitative color gradients and population-level morphological complexity. To address this challenge, we developed coleaf, an open-source image recognition-based software that demonstrated 97.6% accuracy over conventional ImageJ measurements, while offering higher efficiency and color hues quantification. We then estimated 7 key morphological traits focusing on leaves from a collection of ~ 4,200 mature leaves and ~ 5,000 bud-leaf samples across 167 genetically diverse tea accessions by coleaf. While classical understanding suggests leaf shape differentiation between two varieties in genus sinensis assamica (CSA) and sinensis (CSS), our phenotypic clustering revealed incomplete congruence with phylogenetic relationships, suggesting the presence of additional genetic or environmental modulators beyond population divergence. Furthermore, we integrated phenotypic data with whole-genome resequencing for multi-model genome-wide association studies (GWAS). Candidate genes associated with leaf architecture were involved in plant development (e.g., CsFAS2), cell division and elongation (e.g., CsFIP1), and cellular morphogenesis (e.g., CsRLK), whereas those associated with leaf color, regulated pigment accumulation (e.g., ABC transporters, CsMYB113). In conclusion, this study establishes a standardized computational framework validating automated image recognition for plant leaf phenomics. The end-to-end framework from high-throughput phenotyping to gene discovery provides critical genetic targets for tea breeding, demonstrating transformative potential in accelerating the genetic improvement of tea plants.
Why it matches plant phenotyping methods茶葉形態の画像認識ソフトウェアを開発・検証し、高スループットな形質抽出フレームワークとして適用しており、植物フェノタイピング手法が研究の中心である。
abstractwe developed coleaf, an open-source image recognition-based software that demonstrated 97.6% accuracy over conventional ImageJ measurements
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicAll codes and tools used in this study are described in Methods, coleaf is available on github (https://github.com/mengmeng-jiang/coleaf).Open asset ↗mengmeng-jiang/coleafhtml-lines:390-460Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
BACKGROUND: Root biomass serves as a critical indicator of plant eco-physiological status and crop productivity, yet its non-destructive monitoring remains challenging because of its underground location. The use of transparent nutrient film technique (NFT) systems enables direct observation of entire root systems, rendering image-based phenotyping feasible. In this study, we investigated and compared the performance of RGB and hyperspectral imaging for predicting root dry weight in hydroponically grown spinach (Spinacia oleracea L.). RESULTS: Using 430 root segments divided from 60 plants, three models were developed: (1) an area-based regression based on root coverage, (2) a convolutional neural network (CNN) using RGB images, and (3) a partial least squares regression (PLSR) model using hyperspectral data (450-950 nm). The area-based regression exhibited limited accuracy (R² = 0.446) because of saturation at high root coverage. The CNN model improved predictive performance (R² = 0.739) but tended to overestimate sparse roots as a result of resolution constraints. The PLSR model achieved the highest accuracy (R² = 0.822, RMSE = 0.019 g/segment), with significantly lower error than RGB-based approaches (P < 0.01). Variable importance in projection analysis indicated that PLSR effectively exploited spectral signatures at 450 nm (background contrast) and 750 nm (tissue scattering), thereby maintaining stable accuracy across the full biomass range. When validated using 104 independent plants, the PLSR model achieved high predictive accuracy. Furthermore, as a proof of concept, this model successfully visualized the spatiotemporal dynamics of root biomass accumulation over 50 days, with only a 7.70% relative error at harvest. CONCLUSIONS: To our knowledge, this study is among the first to demonstrate the non-destructive monitoring of biomass distribution within entire root systems under production conditions. Hyperspectral imaging combined with PLSR outperforms RGB-based approaches by capturing spectral signatures that reflect internal tissue properties of roots, thereby overcoming limitations caused by morphological occlusion. This approach provides a robust tool for precision agriculture and high-throughput phenotyping, enabling continuous assessment of root growth through simple modifications to the existing hydroponic systems.
Why it matches plant phenotyping methodsRGB・ハイパースペクトル画像と機械学習／PLSRを用いて根乾物重を非破壊推定・検証する方法研究であり、植物表現型の取得と定量化が中心である。
abstractThe use of transparent nutrient film technique (NFT) systems enables direct observation of entire root systems, rendering image-based phenotyping feasible.
Reproduction assets foundThe paper's Data availability statement deposits the paper-specific phenotyping assets (raw hyperspectral images, RGB images, and root dry weight measurements) in a Zenodo record. The provided URL includes a token and 'preview=1', suggesting the record may not yet be fully open, but it is the authors' stated public URLDataset · publicThe datasets generated and analyzed during the model construction of the current study are available in the Zenodo repository: [https://zenodo.org/records/18072801?preview=1&token=eyJhbGciOiJIUzUxMiJ9.eyJpZCI6ImFiYTkzMzY2LTIzZjktNDlkMy1iZTBjLTk3M2E5YTUyOTFmZCIsImRhdGEiOnt9LCJyYW5kb20iOiIzNGE1ZjMxNDZhYjhiYjlhZWRiOWFjNzBkNzcwY2I3NyJ9.uR4HfosoSaVWhtSblMOS1v9bJFA5MvHwXvcW9uoNbcTWRDU4RNxZpVHjXTC3ulBM1JTlBbeHp_4T5EcILawxdg].The dataset includes:
- Raw hyperspectral images and data- RGB images
- Root dry weight measurementsOpen asset ↗Zenodo · 18072801lines:176-248Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Service crops are grown to provide ecosystem services in viticulture, but their adoption remains limited due to their competition with grapevine for soil resources. To identify trade-offs between services, the effect of service crops management strategies on grapevine performances still need further research. This dataset presents data from two experiments conducted to study the effect of service crops management on soil resources and grapevine performances. The inter-row vegetation was sampled in two Mediterranean vineyards using quadrats for biomass estimation. In addition, an unmanned aerial vehicle (UAV) was regularly flown over the vineyards for a period spanning more than four years in total over the two vineyards. The dataset presented here includes both raw data acquired during fieldwork and processed data derived from this raw inputs. The raw data consists of image series captured by two UAVs during each flight campaign, including RGB and multispectral imagery. Images were acquired between 2021-06-10 and 2022-07-29 for the first vineyard, and between 2023-06-08 and 2025-03-12 for the second vineyard. Based on these raw data, the processed data comprises spatial vectors, raster layers, and dense point clouds generated from UAV images using a Structure from Motion (SfM) photogrammetry workflow, at a 5 cm spatial resolution. The raster layers and dense point clouds provide specific information on vineyard characteristics for each UAV flight date, including elevation, vegetation indices, visible and near-infrared reflectance, and canopy height. In addition, the processed data include measurements of vegetation dry biomass, as well as separate measurements of dry biomass and leaf area measured for selected service crops species. This dataset can be reused for the calibration and/or evaluation of classification algorithms aimed at discriminating vines from the inter-row vegetation, or as part of a larger dataset to explore relationships between remotely-sensed vegetation indices and field-measured vegetation biomass or surface.
Why it matches plant phenotyping methodsUAV画像とSfM処理により、植生指数・樹冠高・バイオマス等の植物形質を取得した再利用可能なデータセットで、分類アルゴリズムの校正・評価用途も明示されており、植物フェノタイピング手法・データ基盤が中心です。
abstractThe dataset presented here includes both raw data acquired during fieldwork and processed data derived from this raw inputs.
Reproduction assets foundThe paper is a Data in Brief article describing a public dataset on Research Data Gouv (doi: 10.57745/MXM55R) containing UAV RGB/multispectral imagery, SfM-derived rasters and point clouds, and field-measured vegetation biomass/leaf-area data from two Mediterranean vineyards — directly the paper's phenotyping inputs. ADataset · publicollected in vineyards located in southern France near Montpellier (43°32.5243′N, 3°50.8240′E). Data are stored on Research Data Gouv, a remote storage solution curated by the French Department of Research.
Data accessibility
Repository name: Research Data Gouv
Data identification number: doi: 10.57745/MXM55R
Direct URL to data: https://doi.org/10.57745/MXM55R
Related research article
None
1.
Value of the Data
•
The fine scale imaging of vineyards (i.e., 5 cm resolution) allows for classification of the vegetation in the vineyard inter-rows, and subsequent exploration of its respective dynamics.
•Open asset ↗Research Data Gouv · 10.57745/MXM55Rlines:1-47Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Accurate flower-load assessment is critical for informed thinning strategies in orchard management. UAV-based deep learning automated counting offers efficiency advantages, yet precise counting is heavily dependent on abundant annotated data, which is scarce and costly to obtain in agricultural settings. While semi-supervised learning alleviates dependency on manual annotation, its application to UAV-based orchard imagery faces challenges: complex backgrounds and small target sizes, which undermine pseudo-label reliability. To address these challenges, this study proposes a two-stage framework to achieve separate counting of apple flowers at different phenological stages. First, a color-SAM flower extractor (CSAM-FE) is proposed to preprocess images using a strategy combining color thresholding with the Segment Anything Model (SAM), suppressing background noise and extracting high-quality flower clusters, thereby providing purified inputs for the subsequent counting network. Second, an uncertainty-guided semi-supervised flower counting network (USCount-Net) is proposed for accurate stage-specific flower counting with limited labeled data. The USCount-Net incorporates two key components: an adaptive pseudo-label filtering (PLF) mechanism based on frequent forward uncertainty estimation (FFUE) is designed to dynamically suppress noisy gradient backpropagation, mitigating error propagation from unreliable pseudo-labels; and a noise-sensitive adaptive gated fusion (AGF) module is introduced to fuse cross-scale features without redundancy, addressing significant scale variations across phenological stages and observation angles. Comparative experiments on a self-built apple flower counting dataset demonstrate that USCount-Net achieves lower MAE and RMSE than state-of-the-art methods at 10%, 30%, and 50% labeling ratios. The results demonstrate that the proposed methodology serves as methodological support for rapid and precise apple flower counting in low-annotation agricultural scenarios.
Why it matches plant phenotyping methodsリンゴ花の画像抽出・計数手法と半教師あり解析ネットワークを開発し、データセット上で比較評価しているため、植物表現型取得が中心である。
abstractthis study proposes a two-stage framework to achieve separate counting of apple flowers at different phenological stages.
Reproduction assets foundThe paper's Data availability statement explicitly provides public access to the authors' USCount-Net source code on GitHub and the self-built apple flower counting dataset (UAV images, annotations, flower cluster images) on Google Drive.Code · publicThe source code is publicly available at https://github.com/haohuihui5019/USCount-Net . And the source dataset can be accessed at https://drive.google.com/drive/folders/1KP8H0qIuct56hWre5GV6ZJnzwOpen asset ↗USCount-Netlines:681-780Dataset · publicThe source code is publicly available at https://github.com/haohuihui5019/USCount-Net . And the source dataset can be accessed at https://drive.google.com/drive/folders/1KP8H0qIuct56hWre5GV6ZJnzwOpen asset ↗lines:681-780Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Volume is an important shape descriptor in postharvest quality evaluation and breeding programs of sweetpotatoes and is also valuable for other agricultural engineering applications. Traditional volume measurement methods based on water displacement are, however, laborious, destructive, and unsuitable for high-throughput online scenarios. To address this gap, this dataset was developed to support the advancement of non-destructive, automated online volume estimation using a LiDAR (light detection and ranging)-based three-dimensional (3-D) machine vision system. A total of 200 sweetpotato storage roots of the cultivar "Beauregard" were collected for constructing a 3-D multi-view imagery dataset. Each sample was imaged online using a short-range LiDAR camera (Intel RealSense™ L515) while traveling on a custom-built roller conveyor system that enables simultaneous translation and rotation for full-surface coverage. The curated dataset comprises raw color images (1280 × 720 pixels, .png format) and corresponding raw and segmented point clouds (1280 × 720 pixels, .laz format) for individual samples, alongside the reference volume measurements obtained using the standard water displacement method. In addition, to illustrate the modeling pipeline for volume prediction, the dataset provides the extracted geometric features derived from the segmented two-dimensional (2-D) masks and point clouds, and volume prediction results obtained through regression modeling. As the first publicly available LiDAR-based dataset for sweetpotato volume estimation, this dataset provides a valuable resource for developing and validating image processing pipelines, optimizing machine learning models, and advancing 3-D vision technologies for non-destructive, rapid measurement of the volume of irregularly shaped agricultural products.
Why it matches plant phenotyping methodsサツマイモ貯蔵根の体積という植物器官形質をLiDAR 3D画像から推定する公開データセットであり、取得系・参照測定・特徴抽出・予測結果を含むため、フェノタイピング手法とデータセットが中心です。
abstractthis dataset was developed to support the advancement of non-destructive, automated online volume estimation using a LiDAR (light detection and ranging)-based three-dimensional (3-D) machine vision system.
Reproduction assets foundThe paper's own LiDAR sweetpotato dataset (images, point clouds, ground-truth volumes, feature data, and Python modeling scripts) is publicly deposited on Zenodo with an explicit DOI. The librealsense GitHub link is a generic camera SDK, not a paper-specific asset.Dataset · publicDirect URL to data: https://doi.org/10.5281/zenodo.18378019Open asset ↗Zenodo · 10.5281/zenodo.18378019html-lines:90-113Code · publicThe complete Python modeling script and the associated feature datasets have been included in the public dataset repository [13] to facilitate reproducibility and provide a benchmark for future algorithm development.Open asset ↗html-lines:168-182Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
The wheat canopy genome harbors abundant yet untapped genetic variation that could be harnessed to enhance yield potential. The green area index (GAI) is a structural metric that reflects the photosynthetically active canopy surface and is closely linked to final grain yield. Current image-based GAI retrieval methods often suffer from signal saturation and coarse structural depiction, constraining downstream genetic analyses. To address this limitation, we constructed a comprehensive image dataset spanning eight field experiments across China and France, encompassing approximately 600 genotypes under six distinct management regimes. Leveraging this diverse data, we developed a multimodal deep-learning framework augmented by simulated-to-realistic (sim2real) synthetic data transfer. This framework fuses nadir and oblique RGB images with accumulated thermal time to produce high-precision, time-series GAI estimates. Validated on independent testing datasets from both China and France, the multimodal approach demonstrated robust performance with an accuracy of R 2 = 0.88 and an RMSE of 0.49 m 2 m -2 , representing an improvement of about 22% over the traditional gap fraction method. In three site-year field experiments involving 565 genotypes, the GAI dynamics derived from the multimodal approach showed higher broad-sense heritability (0.20-0.48) than those from the gap fraction approach (0.02-0.13) and stronger genotypic correlations with yield (0.19-0.40 versus 0.09-0.31). Furthermore, genetic analysis confirmed the biological fidelity of the estimated traits, identifying loci that co-localize with known architectural regulators such as Rht-D1 , TaTB1-4D , and TaBGC1-4D . Consistently, the multimodal-derived phenotypes were specifically enriched in cell-wall remodeling and hormonal signaling pathways (e.g., brassinosteroid) that directly regulate canopy expansion. Overall, the proposed method offers a powerful tool for unlocking genetic gain in canopy architecture and accelerating canopy-targeted wheat improvement.
Why it matches plant phenotyping methodsデュアルアングルRGB画像と熱時間を統合してGAIを推定する深層学習法を開発し、独立データで検証しているため、植物形質取得法が研究の中心です。
abstractwe constructed a comprehensive image dataset spanning eight field experiments across China and France
Reproduction assets foundThe paper publicly releases its pre-trained multimodal GAI-estimation model weights and inference code on Hugging Face, directly reproducing this paper's phenotyping analysis. The raw image and phenology datasets are not public and require contacting the authors.Code · publicThe pre-trained model weights, inference code, and usage instructions are publicly available in the Hugging Face repository at https://huggingface.co/PheniX-Lab/GAI-Estimation/tree/main .Open asset ↗PheniX-Lab/GAI-Estimationlines:259-277Code / dataset availability confirmedCrossref · OpenAlex · Europe PMC · checked 5 Sept 2026
Developing climate-resilient wheat varieties requires combining high yield with stability across diverse environments, especially under increasingly variable precipitation and rising temperatures. This study evaluated 64 post-Green Revolution durum wheat cultivars under irrigated and rainfed conditions at two contrasting Mediterranean sites in Spain. A classification framework was developed to support genotype selection based on yield and yield stability, estimated using linear mixed models and yield slopes across environments. Genotypes were classified by interquartile thresholds, and those showing either low yield or low stability were considered undesirable for selection. High-throughput phenotyping was conducted throughout the season using ground-sensor Red-Green-Blue (RGB) and multispectral (MS) vegetation indices (VIs), along with UAV-derived RGB, MS, and thermal-infrared (TIR) data. VIs and TIR at anthesis and grain filling, and their differences (senescence proxies), were used to train Random Forests for yield and stability estimation including sequential feature selection. Environmental covariates (water input, reference evapotranspiration) were integrated in yield models, with strong outcomes (R 2 > 0.74; MAPE <23.6%). Stability predictions were based on VI stability and, though moderate (R 2 up to 0.56; MAPE <17.75%), outperformed previous studies. Selected features were used to evaluate seasonal reflectance phenotypes: “keep” genotypes (intermediate/high yield or/and stability) exhibited early-vigor but lower green retention by the end of grain filling, while “discard” genotypes (low yield or/and stability) showed reduced early vigor and “stay-green” behavior. This study highlights early-vigor and earlier senescence over “stay-green” for wheat selection, offering a cost-effective approach shifting the breeding focus from yield maximization to joint yield-stability evaluation, promoting sustainability.
Why it matches plant phenotyping methods高スループットの地上・UAVセンサーによる表現型取得と、機械学習による収量・安定性推定が研究の中心であり、育種選抜に用いる手法を実質的に評価・適用している。
abstractHigh-throughput phenotyping was conducted throughout the season using ground-sensor Red-Green-Blue (RGB) and multispectral (MS) vegetation indices (VIs), along with UAV-derived RGB, MS, and thermal-infrared (TIR) data.
Reproduction assets foundThe authors explicitly state that the datasets and analysis scripts for all analyses (yield/stability modeling, VI extraction, Random Forest workflows) are publicly available in their Zenodo repository (DOI 10.5281/zenodo.17435708), referenced both in the statistical analysis section and the Data Availability statementCode · publicThe datasets and scripts for all the analyses conducted are available in our repository ( https://doi.org/10.5281/zenodo.17435708 ).Open asset ↗zenodo · 10.5281/zenodo.17435708lines:222-237Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 5 Sept 2026
Abstract Observer bias and inconsistencies in traditional plant phenotyping methods limit the accuracy and reproducibility of fine-grained plant analysis. To address these limitations, TomatoMAP is introduced as a comprehensive dataset for Solanum lycopersicum . The dataset contains 68,080 RGB images: 3,616 high-resolution macrophotographs (3648 × 5472) with semantic annotations, and 64,464 moderate-resolution images (1080 × 1440) captured from 12 plant poses at four camera elevations. Each image is accompanied by manually annotated bounding boxes for seven regions of interest (leaves, panicle, flower clusters, fruit clusters, axillary shoot, shoot, and whole-plant area) and by labels spanning 50 BBCH classes representing phenologically growth stages. A general cascading structure is proposed. For real-time applicability, models emphasizing the accuracy-efficiency trade-off (MobileNetv3, YOLOv11, and Mask R-CNN) are prioritized and benchmarked against multiple state-of-the-art models. Performance is assessed using accuracy, mAP, inference FPS, and normalized confusion matrices. In a study involving five domain experts, AI models trained on TomatoMAP achieves comparable accuracy levels. Reliability of automated fine-grained phenotyping is supported by Cohen’s Kappa statistics and inter-rater agreement heatmaps.
Why it matches plant phenotyping methodsトマトの多視点画像、器官領域・生育ステージ注釈を備えたデータセットを構築し、画像モデルの精度・効率・専門家一致度をベンチマークしており、植物フェノタイピング手法が中心である。
titleTomato Multi-Angle Multi-Pose Dataset for Fine-Grained Phenotyping.
Reproduction assets foundThe paper's authors publicly release their analysis code (dataset construction scripts for TomatoMAP-Cls/Det and model training/evaluation code) on GitHub. The TomatoMAP phenotype image dataset itself is deposited at e!DAL (10.5447/ipk/2025/14), but no matching URL is present in the allowed list, so only the code assetCode · publicThe scripts for constructing TomatoMAP-Cls and TomatoMAP-Det, as well as the code used for model evaluation, are available at: https://github.com/0YJ/TomatoMAP.Open asset ↗https://github.com/0YJ/TomatoMAPhtml-lines:423-479Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Grapevines ( Vitis vinifera L.) undergo structural and physiological changes throughout the growing season, progressing through distinct phenological stages that require regular monitoring. This dataset consists of high-resolution point cloud data acquired with a stationary terrestrial laser scanner (TLS) to document grapevine development from early leaf development to dormancy. Georeferenced point clouds were generated from 15 TLS scans along two vineyard rows at nine phenological stages. The dataset also includes multispectral and RGB photogrammetric point clouds and orthorectified raster products from an unmanned aerial vehicle survey conducted before harvest. Ground-truth measurements leaf area index, grape production, and pruning wood biomass were collected for each monitored grapevine. As a result, the dataset provides multi-temporal TLS observations that support grapevine structural analysis and development, phenological monitoring, and can be used for the development of AI-based models for precision viticulture.
Why it matches plant phenotyping methodsブドウの生育・構造・フェノロジーを対象とするTLS点群および関連画像データセットであり、植物フェノタイピング用の再利用可能なデータ基盤として中心的です。
titleTLS-grapevine2024: A terrestrial laser scanner point cloud dataset of grapevines at different phenological stages.
Reproduction assets foundThe paper is a Data in Brief article describing the TLS-grapevine2024 dataset itself, publicly deposited on Zenodo with DOI 10.5281/zenodo.16751663. This is a paper-specific, openly available asset containing the TLS point clouds, UAV imagery/rasters, and ground-truth agronomic measurements (LAI, grape production, prunDataset · publicditions: clear sky.
Data source location
Institution: University of Trás-os-Montes e Alto Douro
City/Town/Region: Arroios, Vila Real, Norte
Country: Portugal
Coordinates: 41°17′28.83″N 7°43′17.90″W,
Altitude: 435 m
Data accessibility
Repository name: Zenodo
Data identification number: 10.5281/zenodo.16751663
Direct URL to data: https://doi.org/10.5281/zenodo.16751663
Related research article
None
1.
Value of the Data
•
This dataset covers nine phenological stages of grapevine growth from April 2024 to January 2025, providing multi-temporal terrestrial laser scanner (TLS) observations for structural and phenological analysis.
•
It includes TLS point clouds collected at multiple stages and muOpen asset ↗Zenodo · 10.5281/zenodo.16751663lines:1-50Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
This data article describes a curated RGB-Depth image dataset captured using an Intel RealSense D435 stereo depth camera mounted on an autonomous mobile platform during field deployments at commercial baby broccoli farms in Victoria, Australia. The dataset comprises 1759 paired RGB images (640 × 480 pixels) and corresponding 16-bit depth frames acquired under both daytime (natural sunlight) and night-time (LED illumination) conditions, designed to support research in agricultural computer vision and robotic harvesting. Images were selected from 39,765 raw acquisitions through a reproducible Python curation pipeline applying quality filtering (blur detection, brightness thresholds, corruption detection), perceptual hash-based duplicate removal, and manual review. The final dataset includes 924 daytime and 835 night-time image pairs containing baby broccoli plants at various growth stages. The dataset provides RGB camera intrinsic parameters and pixel-aligned depth maps to enable 3D point cloud reconstruction. Potential applications include developing deep learning models for crop detection and segmentation, validating depth-based size estimation methods, and benchmarking illumination-robust vision systems. All data and curation code are publicly available under a CC BY 4.0 license.
Why it matches plant phenotyping methodsRGB-Depth画像データセットの構築と再現可能なキュレーションを中心とし、作物検出に加えてサイズ推定という植物形質の評価・ベンチマークに利用できるため。
titleA field-acquired RGB-Depth image dataset for computer vision-based baby broccoli detection and size estimation under varying illumination conditions.
Reproduction assets foundThe paper is a data article describing a public Mendeley Data repository containing the authors' field-acquired RGB-D baby broccoli image dataset (1759 image pairs, ground truth diameter annotations, camera intrinsics, and curation/annotation code), directly reproducing the paper's phenotyping measurements and analysisDataset · publicRepository name: Mendeley Data
Data identification number: 10.17632/px5p6zdk6k.3
Direct URL to data: https://data.mendeley.com/datasets/px5p6zdk6k/3Open asset ↗Mendeley Data · 10.17632/px5p6zdk6k.3html-lines:95-155Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
We present a novel method for accurately counting winter wheat tillers based on RGB images from hand-collected samples. An efficient sample preparation method assembles wheat tillers into bundles from which individual tillers are robustly detected automatically, using classical image analysis. A custom-made user interface ('TillerCounter' program) allows adjusting the automatic detections interactively, which leads to highly accurate tiller counts comparable to the ground truth obtained by manual counting. The key contributions of our work include:1.An efficient method for imaging straw tillers based on bundle assembly.2.An extensive study of the obtained image quality and comparison with the ground truth data from manual counting.3.Demonstration of the approach's high accuracy using correlation analysis (Pearson correlation coefficient R = 0.973 compared to ground truth) and error analysis (root mean squared relative errors below 5 %).
Why it matches plant phenotyping methods小麦分げつ数という植物形態形質を、画像取得・古典的画像解析・専用ソフトウェアで自動推定し、手動計数を基準に精度検証しているため、フェノタイピング手法が中心です。
abstractWe present a novel method for accurately counting winter wheat tillers based on RGB images from hand-collected samples.
Reproduction assets foundThe paper's authors publicly released the TillerCounter GUI source code on GitHub, which implements the Hough-transform-based tiller counting analysis used in this study. The paper also cites original image/count data at Zenodo (10.5281/zenodo.14446564), but no Zenodo URL is present in the allowed URL list, so only theCode · publicThe source code of the TillerCounter GUI is given at https://github.com/agroscope-ch/TillerCounterGui. Original data is given at Zenodo repository: 10.5281/zenodo.14446564Open asset ↗agroscope-ch/TillerCounterGuihtml-lines:163-195Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Abstract Agriculture and global food security are critically dependent on accurate and timely identification of plant diseases and pests. Traditional approaches to disease identification rely heavily on visual inspection and expert knowledge, which frequently lack the accuracy, speed, and scalability needed to address growing agricultural challenges. Early and precise disease detection enables proactive interventions that can prevent widespread crop damage and reduce excessive pesticide use, thereby supporting sustainable agricultural practices. Artificial intelligence, particularly deep learning methods, has emerged as a transformative solution for automated plant disease diagnosis. Convolutional neural networks (CNNs) have demonstrated remarkable capabilities in image classification tasks, evolving from individual architectures to sophisticated ensembles and transferring learning models. However, existing CNN-based research on rice disease identification has typically focused on a limited number of disease classes, restricting their practical applicability in real-world agricultural settings. This study addresses these limitations by implementing DenseNet121, an advanced CNN architecture known for its efficient feature reuse and gradient flow, for comprehensive rice disease classification. We utilized a dataset comprising seven of the most common rice diseases, significantly expanding the scope beyond previous studies. The model employs transfer learning with pre-trained ImageNet weights and is optimized using the Adam optimizer with carefully tuned hyperparameters. The experimental evaluation on an independent test set demonstrates that our proposed model achieves an overall accuracy of 97.9%, with individual disease classification accuracy ranging from 94% to 99.67%. The model exhibits balanced performance across multiple metrics, including precision (96.2%), recall (97.97%), and F1-score (97%), confirming its robustness and generalizability. These results establish DenseNet121 as a highly effective framework for automated rice disease diagnosis, offering a practical tool for enhancing agricultural productivity and food security.
Why it matches plant phenotyping methodsイネ葉の画像から病害状態を分類する深層学習手法が研究の中心であり、独立テストセットによる性能評価も実施しているため、植物病害フェノタイピング手法として収載する。
abstractThis study addresses these limitations by implementing DenseNet121, an advanced CNN architecture known for its efficient feature reuse and gradient flow, for comprehensive rice disease classification.
Reproduction assets foundThe paper's rice disease classification experiments use the public Kaggle Paddy Disease Classification dataset (8030 images, 7 disease classes), explicitly cited and linked by the authors in the Data Availability Statement. No author code or trained model checkpoints are disclosed.Dataset · publicThe data presented in this study are available in Kaggle42.Open asset ↗Kagglehtml-lines:487-556Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Abstract Soybean growth is determined by the interaction of genetic, environmental, and management factors. In the context of future climate and climate extremes, understanding genotype by environment interaction (GxE) will be crucial for selecting resilient breeding lines and optimizing management practices to minimize stress. This requires an in depth elucidation of stressful weather conditions and differing temporal responses of genotypes to those conditions. In field studies, however, the environment is often treated as a static factor, and the specific effects of weather variability on crop growth remain poorly understood. Here, we present a longitudinal dataset comprising 17,247 high-resolution RGB images of soybean breeding lines collected throughout eight years in Eschikon, Switzerland. Top-of-canopy images were acquired throughout the entire growing seasons and complemented by hourly weather data, enabling a comprehensive analysis of soybean growth dynamics under varying field conditions. High spatio-temporal image resolution allows detailed analysis of growth dynamics and GxE, supporting identification of stress-tolerant genotypes to improve yield prediction and yield stability.
Why it matches plant phenotyping methods8年間の高スループット画像フェノタイピングによる大規模データセットを提示し、画像取得基盤と作物成長動態の解析を中心に扱っているため、方法論文として適格です。
titleFIP 1.0 soybean data: Insights on soybean growth from eight years of high-throughput image field phenotyping
Reproduction assets foundThe paper's canopy cover analysis code is publicly available on the authors' ETH GitLab repository. The FIP 1.0 soybean image/trait dataset itself is deposited in the ETH Research Collection and Hugging Face, but those URLs are not among the allowed URLs, so only the code asset qualifies.Code · publicCode availability
The code is available on: https://gitlab.ethz.ch/crop_phenotyping/fip-soybean-canopycover. Users with similar data can use the implemented workflow to get canopy cover from their experiments.Open asset ↗gitlab.ethz.ch/crop_phenotyping/fip-soybean-canopycoverhtml-lines:207-226Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Published15 Feb 2026Journal of Artificial Intelligence and Engineering Applications (JAIEA)Cited by 0 · OpenAlex ↗
Monitoring plant health is an important factor in maintaining agricultural productivity. Manual identification of leaf diseases requires expert knowledge and is prone to errors due to visual similarities among disease symptoms. This study aims to develop a plant leaf disease classification system based on digital images using a Convolutional Neural Network (CNN) approach. The dataset consists of plant leaf images representing three disease classes: Corn–Common rust, Potato–Early blight, and Tomato–Bacterial spot. Prior to model training, the images undergo preprocessing steps including image resizing and pixel normalization. The performance of the CNN model is evaluated using a testing dataset that is not involved in the training process, employing accuracy, confusion matrix, precision, recall, and F1-score as evaluation metrics. Experimental results show that the proposed model achieves a test accuracy of 95.56%, with balanced performance across all disease classes. In addition to quantitative evaluation, the trained model is implemented in a Streamlit-based application, allowing users to upload plant leaf images and obtain disease classification results interactively. The findings indicate that the CNN-based approach is effective for plant leaf disease classification and has potential application as an early decision-support system for plant health monitoring.
Why it matches plant phenotyping methods植物葉の画像から病害状態を推定するCNN分類法を開発し、独立テストデータで性能評価しているため、植物フェノタイピング手法が中心である。
abstractThis study aims to develop a plant leaf disease classification system based on digital images using a Convolutional Neural Network (CNN) approach.
Reproduction assets foundThe paper's phenotyping input is a publicly available PlantVillage image dataset (900 leaf images across three disease classes) obtained from Kaggle, with an explicit authors' URL. No author analysis code or trained model is publicly deposited.Dataset · publicleaf disease images obtained from the PlantVillage Dataset, which is publicly available through the Kaggle platform [17]. The dataset is
organized using a folder-based class structure, where each folder represents a specific leaf disease category. In this study, three disease
classes are used—Corn–Common rust, Potato–Early blight, and Tomato–Bacterial spot—with 300 images per class, resulting in a total of
900 images.Open asset ↗Kagglepdf-page:3 lines:1-51Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Wheat emergence rate and emergence uniformity are key indicators for evaluating seed vigor and sowing quality, and they play an important role in wheat growth and yield formation. Traditional methods for measuring emergence rate and evaluating emergence uniformity rely on manual assessment, which is inefficient, highly subjective, and unable to meet the demand for large scale, high efficiency, and precise acquisition of wheat emergence data. In this study, RGB images and a two-stage deep learning algorithm were used to extract and analyze seedling traits of 420 wheat varieties under two nitrogen levels, and the results were applied to genome wide association studies to elucidate the genetic basis. The two-stage algorithm integrates a Bidirectional Feature Pyramid Network, small object detection layer, large size image input, and FasterNet to improve detection and instance segmentation speed and accuracy. The proposed method achieved an emergence rate accuracy of 0.929, with R 2 = 0.914 and RMSE = 2.448 compared to manual measurements, and required less than 0.2 s per image for analysis. By employing this two-stage algorithm for processing and analysis, varieties (e.g., Gao8901 and ShiYou20) that consistently exhibited high emergence rates and uniformity under multiple nitrogen treatments were identified. Furthermore, genome-wide association study identified the major loci qEmergence rate-3A and qUniformity-6B governing seedling emergence rate and uniformity, which likely enhance wheat seedling traits by modulating energy supply or related signaling molecules. The emergence-rate and uniformity data generated by the two-stage algorithm significantly accelerated the discovery of relevant genes and enabled the identification of wheat varieties with high emergence rate and uniformity, providing valuable insights and practical references for high-quality breeding and gene mining.
Why it matches plant phenotyping methodsRGB画像と二段階深層学習による出芽率・均一性の自動取得手法を開発し、手動測定との精度比較および大規模品種適用を行っており、表現型取得法が研究の中心である。
abstractTraditional methods for measuring emergence rate and evaluating emergence uniformity rely on manual assessment, which is inefficient, highly subjective, and unable to meet the demand for large scale, high efficiency, and precise acquisition of wheat emergence data.
Reproduction assets foundThe authors openly provide test code, base models, and sample test data for the WS-YOLO two-stage wheat seedling phenotyping pipeline in a public GitHub repository. Raw phenotype datasets are only available upon request, so they do not qualify as public assets.Code · publicThe test code, base models, and sample test data are openly available in the GitHub repository: https://github.com/AIWheatLab/WheatSeedling.Open asset ↗AIWheatLab/WheatSeedlinghtml-lines:375-402Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Field / plotLiDAR / point cloudRGB / grayscaleLeafStem / branchWhole plant / canopy / plot / fieldClassificationSegmentation
Abstract Annotated datasets are essential for training and evaluating machine learning models in forest ecology. This dataset provides high-resolution, annotated LiDAR point clouds of 674 individual trees from 12 forest plots in the Shivalik Range of northern Haryana, India, representing 24 species. Data were acquired using Terrestrial Laser Scanning (TLS) and Airborne Laser Scanning (ALS), include field-measured attributes such as species identity and Diameter at Breast Height (DBH), and terrestrial and aerial RGB imagery. TLS point clouds were georeferenced and co-registered with centimetre-level accuracy, enabling precise integration with ALS data. The dataset includes segmented individual trees and wood–leaf classifications, suitable for applications such as tree morphology analysis, biomass estimation, and species classification. To support benchmarking, outputs from established classification algorithms (LeWoS, TLSeparation, CANUPO, and Random Forest) are included. As one of the first open-access LiDAR datasets from Indian tropical forests, it provides critical reference data for developing and validating forest structure models. It can also aid biomass mapping efforts in support of large-scale missions such as NASA-ISRO’s NISAR and ESA’s BIOMASS.
Why it matches plant phenotyping methods個体樹木のLiDAR点群・RGB画像と樹木セグメンテーションを含む公開データセットで、樹形解析や森林構造モデルの開発・検証、分類アルゴリズムのベンチマークを目的としており、植物形質取得が中心です。
abstractThis dataset provides high-resolution, annotated LiDAR point clouds of 674 individual trees from 12 forest plots in the Shivalik Range of northern Haryana, India, representing 24 species.
Reproduction assets foundThe paper's authors explicitly state that all code used for data processing, wood-leaf classification, feature extraction, and tree volume estimation is openly available on GitHub at https://github.com/moonis-ali/Dataset, which is an allowed URL. The paper's core LiDAR dataset is deposited on Zenodo (10.5281/zenodo.153Code · publicAll code used for data processing, wood-leaf classification, feature extraction, and tree volume estimation is openly available on GitHub at https://github.com/moonis-ali/Dataset .Open asset ↗https://github.com/moonis-ali/Datasetlines:479-553Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Accurate and timely diagnosis of rice leaf diseases is crucial for smart agriculture leveraging vision sensors. However, existing lightweight convolutional neural networks (CNNs) often struggle in complex field environments, where small lesions, cluttered backgrounds, and varying illumination complicate recognition. This paper presents I-GhostNetV3, an incrementally improved GhostNetV3-based network for RGB rice leaf disease recognition. I-GhostNetV3 introduces two modular enhancements with controlled overhead: (1) Adaptive Parallel Attention (APA), which integrates edge-guided spatial and channel cues and is selectively inserted to enhance lesion-related representations (at the cost of additional computation), and (2) Fusion Coordinate-Channel Attention (FCCA), a near-neutral SE replacement that enables efficient spatial-channel feature fusion to suppress background interference. Experiments on the Rice Leaf Bacterial and Fungal Disease (RLBF) dataset show that I-GhostNetV3 achieves 90.02% Top-1 accuracy with 1.831 million parameters and 248.694 million FLOPs, outperforming MobileNetV2 and EfficientNet-B0 under our experimental setup while remaining compact relative to the original GhostNetV3. In addition, evaluation on PlantVillage-Corn serves as a supplementary transfer sanity check; further validation on independent real-field target domains and on-device profiling will be explored in future work. These results indicate that I-GhostNetV3 is a promising efficient backbone for future edge deployment in precision agriculture.
Why it matches plant phenotyping methods画像からイネ葉の病徴を認識・分類する軽量深層学習手法を開発し、複数データセットで精度と計算量を評価しているため、植物フェノタイピング手法が中心である。
abstractThis paper presents I-GhostNetV3, an incrementally improved GhostNetV3-based network for RGB rice leaf disease recognition.
Reproduction assets foundThe paper's phenotyping inputs are two publicly available plant image datasets explicitly linked by the authors: the RLBF rice leaf disease dataset on Mendeley Data (primary evaluation) and the PlantVillage-Corn dataset on GitHub (cross-domain transfer). No author analysis code or trained model checkpoints are stated.Dataset · publicThe Rice Leaf Bacterial and Fungal Disease Dataset can be accessed at https://data.mendeley.com/datasets/hx6f852hw4/2 (accessed on 20 July 2025)Open asset ↗hx6f852hw4lines:688-704Dataset · publicthe PlantVillage-Corn Dataset is available at https://github.com/gabrieldgf4/PlantVillage-Dataset (accessed on 27 August 2025)Open asset ↗github.com/gabrieldgf4/PlantVillage-Datasetlines:688-704Code / dataset availability confirmedOpenAlex · Crossref · checked 14 Sept 2026
This work proposes a novel tree detection methodology, named DTCD (Distance Transform Circle Detection), based on a fast circle detection method via Distance Transform and Akaike Information Criterion (AIC) optimization. More specifically, a visible-band vegetation index (RGBVI) is calculated to enhance canopy regions, followed by morphological filtering to delineate individual tree crowns. The Euclidean Distance Transform is then applied, and the local maxima of the smoothed distance map are extracted as candidate tree locations. The final detections are iteratively refined using the AIC to optimize the number of trees with respect to canopy coverage efficiency. Additionally, this work introduces DTCD-PC, a modified algorithm tailored for point clouds, which significantly enhances detection accuracy in complex environments. This work makes a significant contribution to tree detection in the following ways: (1) by creating a tree detection framework entirely based on an unsupervised technique, which outperforms state-of-the-art unsupervised and supervised tree detection methods; (2) by introducing a new urban dataset, named AgiosNikolaos-3, that consists of orthomosaics and photogrammetrically reconstructed 3D point clouds, allowing the assessment of the proposed method in complex urban environments. The proposed DTCD approach was evaluated on the Acacia-6 dataset, consisting of UAV images of six-month-old Acacia trees in Southeast Asia, demonstrating superior detection performance compared to existing state-of-the-art techniques, both unsupervised and supervised. Additional experiments were conducted in the custom-developed Urban Dataset, confirming the robustness and generalizability of the DTCD-PC method in heterogeneous environments.
Why it matches plant phenotyping methodsUAV画像・3D点群から個体樹冠を抽出する新規手法を開発し、複数データセットで精度・頑健性を評価しているため、植物形態の取得・抽出が中心である。
abstractThis work proposes a novel tree detection methodology, named DTCD (Distance Transform Circle Detection), based on a fast circle detection method via Distance Transform and Akaike Information Criterion (AIC) optimization.
Reproduction assets foundThe authors state that the MATLAB code implementing the DTCD/DTCD-PC method, together with the datasets (Acacia-6, AgiosNikolaos-3) and results, is publicly available at their project page. Since the article is published (accepted), this is an actionable public asset containing the paper's tree-detection analysis code,Code · public.P.; All authors have read and agreed to the published version of the manuscript.
Funding: This research received no external funding.
Data Availability Statement: The code implementing the proposed method together with our
results, and the links to the datasets are publicly available after paper acceptance at the following
linkhttps://sites.google.com/site/costaspanagiotakis/research/tree-detection-dtcd, accessed on 30
January 2026.
Conflicts of Interest: The authors declare no conflicts of interest.
Abbreviations
The following abbreviations are used in this manuscript:
AIC Akaike Information Criterion
AMS3D Adaptive Mean Shift 3D
CHM Canopy Height Model
CHT Circular Hough Transform
CSP ComOpen asset ↗pdf-layout-page:24 lines:1-62Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
This article introduces Agri-Vision Bangladesh, a comprehensive, augmented image dataset designed to advance automated disease diagnosis in four economically vital agricultural crops: Bottle Gourd ( Lagenaria siceraria ), Zucchini ( Cucurbita pepo ), Papaya (Carica papaya), and Tomato ( Solanum lycopersicum ). Addressing the scarcity of region-specific agricultural data, a total of 5266 original images were acquired directly from diverse agricultural fields in Bangladesh using a SONY ALPHA 7 II full-frame camera under natural lighting conditions. The dataset encompasses 28 distinct classes, covering a wide spectrum of biotic stressors including viral (Mosaic Virus, Leaf Curl), fungal (Downy Mildew, Anthracnose, Alternaria Blight), bacterial (Bacterial Blight, Xanthomonas), and pest-induced damage (Insect Hole, White Spot), alongside Healthy samples. To ensure scientific reliability, each image underwent a rigorous two-stage validation process by senior agronomists. To tackle class imbalance and facilitate the training of data-intensive Deep Learning models, the dataset was expanded using a Python-based augmentation pipeline incorporating geometric transformations (rotation, flipping) and photometric adjustments (noise, brightness) resulting in a final repository of 28,000 images (5266 original and 22,734 augmented). All files are standardized to 512×512 pixels in JPG format. This expert-validated resource serves as a critical benchmark for developing robust computer vision algorithms (e.g., CNNs, Vision Transformers) for precision agriculture, enabling research into fine-grained classification, object detection, and cross-crop transfer learning in subtropical farming environments.
Why it matches plant phenotyping methods植物病害症状を画像で分類するための専門家検証済みデータセットを構築し、再利用可能なベンチマークとして提供しているため、植物表現型取得法が中心です。
abstractThis article introduces Agri-Vision Bangladesh, a comprehensive, augmented image dataset designed to advance automated disease diagnosis
Reproduction assets foundThe paper is a Data in Brief article describing the Agri-Vision Bangladesh multi-crop leaf disease image dataset, publicly deposited on Mendeley Data with an explicit direct URL and DOI (10.17632/8t6k37ztxc.2). This is a paper-specific public asset containing the original and augmented plant images used in the study.Dataset · publicRepository name: Mendeley Data
Data identification number: 10.17632/8t6k37ztxc.2
Direct URL to data: https://data.mendeley.com/preview/8t6k37ztxc?a=a88a48f1-a9b0-4354-a081-cc8f1e936364Open asset ↗Mendeley Data · 10.17632/8t6k37ztxc.2html-lines:93-117Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Abstract Time-resolved phenotyping of disease symptoms enables dissection of resistance mechanisms and improves diagnosis, but acquiring phenotypic data at satisfactory scale remains challenging. Advances in imaging and image processing have improved measurement precision, robustness, and throughput, but further improvements are needed for practical application. We present a data set comprising 12,520 high-resolution (~0.03 mm/pixel) RGB images representing 1,032 time series of wheat leaves with developing disease symptoms. All images are geometrically aligned with a median precision of 0.16 mm (≈5 pixels). The dataset includes transformation matrices, symptom segmentation masks, metadata on treatments, weather, crop phenology, and disease occurrence, and a lightweight Python toolkit for loading, aligning, inspecting, and editing image sequences. These resources enable detailed investigation of leaf-level disease dynamics such as lesion, pustule, and fruiting body emergence rates, lesion growth, and dynamic interactions of disease development with spatial and environmental contexts. They offer a broad basis for developing improved methods for image alignment and symptom detection, segmentation, and tracking, possibly by tackling these connected challenges within a single end-to-end framework.
Why it matches plant phenotyping methods葉の病徴を対象とした高解像度時系列画像データセットで、幾何位置合わせ、病徴セグメンテーション、追跡用ツールを提供しており、植物病害表現型の取得・解析基盤が中心である。
abstractWe present a data set comprising 12,520 high-resolution (~0.03 mm/pixel) RGB images representing 1,032 time series of wheat leaves with developing disease symptoms.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicWe provide a lightweight Python toolkit to facilitate loading, inspection, and curation of the image sequences and their associated processing products in the associated Git repository (https://github.com/and-jonas/sympathique-wheat).Open asset ↗github.com/and-jonas/sympathique-wheathtml-lines:317-337Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Precision management in high-density orchards requires individual-tree, nondestructive monitoring of canopy nitrogen concentration (CNC), but hyperspectral applications are limited by two factors: unmodeled vertical stratification of CNC within 3D canopies and mixed-pixel effects near canopy boundaries. We develop a cross-modal framework that co-registers RGB-derived 3D point clouds with hyperspectral orthomosaics, enabling individual-tree localization in dense orchards. With this framework, we quantified layer-specific nitrogen-spectral relationships and assessed mixed-pixel effects across canopy positions. Stratified sampling, continuous wavelet transform (CWT), and partial least squares regression (PLSR) with variable importance in projection (VIP)-based band selection were used for spectral optimization, and K-means was applied to isolate representative canopy pixels. Field experiments over two consecutive years (2023-2024) revealed consistent CNC gradients, with the lower canopy exceeding the upper by 0.5-9.5 % across fertilization treatments. CWT-2 delivered the most accurate and robust performance across years. VIP-PLSR indicated layer-dependent CNC-informative wavelengths spanning the visible, red-edge, and near-infrared regions, with scale-dependent cross-layer overlap after CWT. Pixel clustering revealed distinct spatial structure: canopy-interior pixels exhibited characteristic vegetation spectra and achieved R 2 val of 0.69-0.76, substantially outperforming boundary-affected pixels with R 2 val of 0.48-0.57. These results demonstrate that coupling spectral feature optimization with layer-specific modeling and clustering-based pixel screening improves the accuracy of tree-level CNC estimation in complex canopies. The proposed framework provides a mechanistic and operational basis for robust biochemical retrieval in structurally complex orchard systems.
Why it matches plant phenotyping methodsUAVのRGB・ハイパースペクトルデータを統合し、個体樹の樹冠窒素濃度という植物形質を推定する手法を開発・評価しており、フェノタイピング手法が研究の中心です。
abstractWe develop a cross-modal framework that co-registers RGB-derived 3D point clouds with hyperspectral orthomosaics, enabling individual-tree localization in dense orchards.
Reproduction assets foundThe paper's data availability statement explicitly deposits the apple canopy nitrogen concentration dataset and canopy original-reflectance validation dataset in a public GitHub repository, which is a paper-specific, publicly actionable phenotyping asset. No author analysis code or trained models are explicitly stated.Dataset · publicThe apple CNC dataset and the canopy OR independent validation dataset are available at https://github.com/Chenb94115/Plant-Phenomics . Additional supporting data are available from the corresponding author upon reasonable request.Open asset ↗Chenb94115/Plant-Phenomicslines:278-377Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · checked 5 Sept 2026
Background Rice plant architecture underpins yield and grain quality, yet two obstacles impede accurate field characterization in dense paddies. First, single-plant reconstruction is constrained by severe inter-plant occlusion, cluttered backgrounds, and limited viewpoints. These factors obscure culms, leaves, basal tillers, and the true physical scale of the plant. Active ranging devices are cumbersome in outdoor plots and can lose accuracy, whereas conventional passive photogrammetry performs poorly under such conditions. Second, delineating panicles within a 3D rice model is intrinsically difficult. Panicles are slender, highly branched, and visually similar to surrounding foliage, often interwoven and partially hidden. These factors result in fragmented boundaries and missing details. Direct point-cloud segmentation struggles with such discontinuous geometry and requires costly 3D annotation, whereas generic image segmentation models trained on natural scenes transfer poorly to paddy imagery. These challenges motivate a field-ready workflow that both reconstructs whole plants at high resolution in dense plantings and reliably segments panicles to enable trait extraction. Results A low-cost, in-field, multi-view pipeline for whole-plant three-dimensional reconstruction, termed One Stop 3D Target Reconstruction And segmentation (OSTRA), operates on color images with a reference-board setup. The pipeline builds detailed three-dimensional models of individual rice plants and automatically segments key organs (in this case, panicles), despite dense surrounding vegetation. When applied to 231 diverse rice landraces grown in a crowded field setting, the method produced high-fidelity plant models with clearly delineated panicle structures. From these reconstructions, three architectural traits were derived: plant height, leaf area, and panicle length. Genome-wide association analysis of the measured traits identified strong genotype-phenotype associations tagging known candidate genes. Natural variants at D2 and RFL/APO2 were associated with plant height variation, variants at FLW7 were linked to differences in leaf area, and allelic variation at AAI1 corresponded to panicle length variation. These loci are established regulators of plant growth and morphology, indicating that this three-dimensional phenotyping pipeline attains accuracy sufficient to rediscover meaningful genetic signals. Conclusions This study provides a practical tool for precise rice phenotyping even under dense field planting conditions, overcoming occlusion and structural complexity. By enabling non-destructive, field-based measurement of complete plant architecture and linking these phenotypes to specific genes, the pipeline bridges field phenomics and genomics. The integrated reconstruction and analysis framework advances the study of rice architecture and offers a general route to connect complex traits with their genetic determinants.
Why it matches plant phenotyping methods密植圃場でのイネ全体3D再構築、器官分割、形質抽出を中核とする画像ベース表現型解析手法の開発・実証であり、明確に収載対象。
abstractA low-cost, in-field, multi-view pipeline for whole-plant three-dimensional reconstruction, termed One Stop 3D Target Reconstruction And segmentation (OSTRA), operates on color images with a reference-board setup.
Reproduction assets foundThe paper explicitly states that the 3D rice plant models (231 landraces) are deposited on Zenodo and the OSTRA source code is publicly available on GitHub. Both are paper-specific, public, and actionable.Code · publicThe source code of OSTRA is available on GitHub at [http://github.com/ganlab/ostra] (http:/github.com/ganlab/ostra).Open asset ↗github · ganlab/ostralines:217-246Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Introduction Potato foliar diseases, particularly early and late blight, pose a serious threat to yield and food security, yet reliable visual recognition remains challenging due to cultivar heterogeneity, variable symptom expression, and acquisition noise in field-like imagery. To address these issues, we propose PotatoLeafNet, a two-stage deep learning framework that combines a fixed-sequence image-augmentation pipeline with a compact, task-optimized 11-layer convolutional neural network (CNN) using 3 × 3 kernels for robust, data-efficient classification of potato leaf conditions (Healthy, Early Blight, Late Blight). Methods We construct a dataset of 4,072 labeled potato leaf images from the PlantVillage-Potato subset and standardize all inputs to 224 × 224 RGB tensors with pixel intensities normalized to [0,1]. A balanced, fixed-order augmentation policy-comprising rotation, translation, shear, zoom, horizontal flipping, brightness adjustment, and channel jitter-is applied exclusively to the training split, increasing it to 6,000 images (2,000 per class) while keeping the validation and test sets free of synthetic samples. The second stage consists of an 11-layer CNN implemented in TensorFlow/Keras and trained with categorical cross-entropy loss and the Adam optimizer under a unified training and evaluation protocol. Performance is benchmarked against strong CNN and hybrid baselines, including ResNet-50 + VGG-16, VGG-16 + MobileNetV2, MobileNetV2, and Inception-V3. Results On the PlantVillage-Potato test set, PotatoLeafNet achieves 98.52% accuracy, 98.67% macro-precision, 99.67% macro-recall, 99.16% macro-F1, and 1.00 macro-AUC, outperforming all baseline models under identical preprocessing and training conditions. In particular, PotatoLeafNet surpasses ResNet-50 + VGG-16 (97.10% accuracy, AUC 0.98), VGG-16 + MobileNetV2 (94.80% accuracy, AUC 0.93), MobileNetV2 (93.20% accuracy, AUC 0.92), and Inception-V3 (92.50% accuracy, AUC 0.91). Short 10-epoch runs yield stable convergence (training accuracy 88.22%, validation accuracy 86.91%, test accuracy 88.15%), indicating efficient learning from the augmented distribution. Discussion The results demonstrate that explicitly coupling a fixed sequential augmentation stage with a lightweight 3×3-kernel CNN enables high tri-class accuracy, strong recall for disease classes, and improved generalization relative to deeper or fused architectures, without incurring substantial computational cost. By emphasizing disease-relevant structure while limiting overfitting, PotatoLeafNet provides a practical and resource-efficient solution for automated screening of potato leaf health in real-world agronomic settings, supporting timely and data-driven disease management.
Why it matches plant phenotyping methodsジャガイモ葉の病害状態を画像から分類するCNN手法を開発し、複数モデルとの性能比較で検証しており、植物フェノタイピング手法が研究の中心である。
abstractwe propose PotatoLeafNet, a two-stage deep learning framework
Reproduction assets foundThe paper's potato leaf disease classification is built on two publicly available Kaggle image datasets: the PlantVillage dataset (source of the PlantVillage-Potato subset) and the Potato Leaf Disease Dataset (PLD, 4,072 images across Healthy, Early Blight, Late Blight). Both are cited with public Kaggle URLs in the 3.Dataset · publicPotato Leaf Disease Dataset ( 2025 ). Kaggle dataset 2024. Available online at: https://www.kaggle.com/datasets/rizwan123456789/potato-disease-leaf-datasetpldOpen asset ↗Kaggle · rizwan123456789/potato-disease-leaf-datasetpldlines:788-867Dataset · publicPlant Village Dataset ( 2024 ). Kaggle [dataset]. Available online at: https://www.kaggle.com/datasets/mohitsingh1804/plantvillage (Accessed April 29, 2024).Open asset ↗Kaggle · mohitsingh1804/plantvillagelines:788-867Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Accurate localization of plant growth points is essential for precision agriculture applications, including electro-weeding and laser weeding. While crop and weed detection has been extensively studied, existing methods focus primarily on object-level recognition and often neglect fine-grained growth point localization. To address this limitation, we propose a novel training strategy, epoch-based prior annealing (EPA), which incorporates the excess green minus excess red (ExG-ExR) index as prior knowledge and introduces schedule factor and gain factor to effectively steer keypoint regression. The experimental results show that incorporating EPA improves keypoint localization performance, with mAP50 increasing by 0.024 and mAP50:95 by 0.011, while maintaining bounding box detection performance. The parameter sensitivity experiments confirmed that both excessively strong and weak guidance can hinder training. Furthermore, analysis of parameters and computational cost shows that the additional overhead introduced by the EPA strategy accounts for less than 0.5% of the total, and be considered negligible. In summary, the proposed EPA strategy significantly improves the accuracy, robustness, and generalizability of plant and growth point detection models, offering a practical and scalable solution for precision agricultural applications.
Why it matches plant phenotyping methods植物の生長点を画像から局在化する学習戦略を開発し、その性能を実験的に検証しており、植物器官の表現型取得が中心です。
abstractwe propose a novel training strategy, epoch-based prior annealing (EPA), which incorporates the excess green minus excess red (ExG-ExR) index as prior knowledge and introduces schedule factor and gain factor to effectively steer keypoint regression.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicYou can access the dataset used in this study at the following links: https://github.com/cropandweed/cropandweed-dataset.Open asset ↗cropandweed/cropandweed-datasethtml-lines:497-528Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Abstract Phenotyping is crucial for understanding crop trait variation and advancing research, but is currently limited by expensive, labor-intensive monitoring. New phenotypic trait monitoring methods are being proposed to reduce this so-called phenotyping bottleneck via automation. These methods are often data-driven, requiring a dataset recorded with a specific sensor and corresponding reference values for developing novel methods. To this end, we present the MuST-C (Multi-Sensor, multi-Temporal, multiple Crops) dataset, which contains field data from various sensors collected over a growing season, covering six crop species. All data was georeferenced for alignment across sensors and dates. To collect our dataset, we deployed aerial and ground robotic platforms equipped with RGB cameras, LiDARs, and multispectral cameras, aiming to capture a wide variety of modalities and observations from different viewpoints. In addition to sensor data, we also provide manually collected leaf area index and biomass reference measurements. Our dataset enables the development of novel automatic phenotypic trait estimation methods, allows comparisons across different sensors, and generalizability across crop species.
Why it matches plant phenotyping methods複数センサー・ロボットプラットフォームによる圃場フェノタイピング用データセットを構築・提供し、形質推定法の開発、センサー比較、汎化評価を可能にすることが中心的な貢献である。
abstractwe present the MuST-C (Multi-Sensor, multi-Temporal, multiple Crops) dataset
Reproduction assets foundThe paper's MuST-C multi-sensor, multi-temporal crop phenotyping dataset (RGB/multispectral images, LiDAR point clouds, LAI and biomass reference measurements) is publicly available via the authors' project webpage, and the authors' custom Python processing/loading code is publicly available on GitHub.Dataset · publicThe MuST-C dataset is available via our project webpage https://www.ipb.uni-bonn.de/data/MuST-C/or directly via the bonndata public access repository 10.60507/FK2/OX9XTM34Open asset ↗html-lines:421-440Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
This study employed an HY-6010-S hyperspectral imaging system, covering a spectral range of 400-1000 nm, combined with an RGB industrial camera to acquire multimodal data. The dataset simulates phenotypic analysis scenarios of maize seeds under controlled laboratory conditions, with the ambient temperature maintained at 20-25°C. Comprehensive testing was conducted using 12 different maize varieties. Approximately 200 seed samples were collected per variety, resulting in a total sample size of about 2400, each subjected to hyperspectral and RGB image acquisition. Preprocessing steps included noise reduction, background removal, band selection, and modality alignment. To ensure the accuracy and reliability of the experimental data, HHIT software and Python were utilized for data processing. This dataset plays a significant role in seed variety classification, phenotypic analysis, precision agriculture, and machine learning applications.
Why it matches plant phenotyping methodsトウモロコシ種子のマルチモーダル画像を収集・前処理した再利用可能なデータセットであり、種子の表現型解析を主要目的としているため、フェノタイピング手法・データセット研究に該当する。
abstractThis study employed an HY-6010-S hyperspectral imaging system, covering a spectral range of 400-1000 nm, combined with an RGB industrial camera to acquire multimodal data.
Reproduction assets foundThe paper is a Data in Brief article depositing its own multimodal maize seed hyperspectral and RGB image dataset (2400 seeds, 12 varieties) on Mendeley Data, with a direct public URL and DOI given in the article.Dataset · publicRepository name: Mendeley Data
Data identification number: doi: 10.17632/4n4xbnx8sr.1
Direct URL to data: https://data.mendeley.com/datasets/4n4xbnx8sr/1Open asset ↗Mendeley Data · 10.17632/4n4xbnx8sr.1html-lines:1-110Code / dataset availability confirmedEurope PMC · bioRxiv · OpenAlex · checked 15 Sept 2026
Lodging is a major contributor to decreased yield in tef, a staple cereal crop in Ethiopia. Semidwarf varieties have been developed with a goal to increase yield through reduced lodging, but studying lodging susceptibility currently requires a labor-intensive, imprecise, manual scoring method. Here we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event. We compare 3D point clouds generated by photogrammetry from RGB images with those generated from LiDAR to estimate height, demonstrating that they produce similar results, despite differences in cost. Stand height and lodging can both be accurately measured with low-cost UAS, reducing the need for manual measurements and increasing precision and temporal resolution in plant breeding programs. Significance Statement Extreme weather or heavy grain can cause plant stems to bend, a process called lodging. Lodging significantly reduces crop yields globally, particularly in grain crops such as tef ( Eragrostis tef ). Semidwarf crops have previously been reported to be lodging-resistant, increasing crop yields. Here, we used uncrewed aerial systems (UAS) to measure plant growth, height, and lodging in gene edited semidwarf tef lines, and compared the results to ground-truth data. Using a UAS equipped with a red-green-blue (RGB) camera or LiDAR sensor, we measured plant height and lodging, and found that early-season height measurements could predict future lodging potential. The tools used were contributed to the open-source software PlantCV-Geospatial for community use. This work contributes to a broader understanding of genetic resistance to lodging, providing valuable insights for tef crop improvement and reduces the need for labor-intensive manual measurements.
Why it matches plant phenotyping methodsUASのRGB画像・LiDARから3D点群を生成し、植物の草高と倒伏を定量化・検証するワークフローが研究の中心であるため、植物フェノタイピング手法として含める。
abstractHere we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event.
Reproduction assets foundThe paper states that code and data associated with the manuscript (UAS-based tef height/lodging phenotyping analyses) are publicly available in the authors' GitHub repository danforthcenter/teff-manuscript. The PlantCV-Geospatial package and D2S platform are general-purpose tools/platforms rather than paper-specific,.Code · publicInstitute Block Grant to K.M.M. and
470
N.F., the National Science Foundation (grant numbers 2120153 and 2346101 to N.F.),
471
the USDA NIFA AFRI (grant number 2022-67021-36467 to N.F.), and by the Bellwether
472
Foundation.
473
474
Data Availability
475
Code and data associated with this manuscript are available on GitHub
476
(https://github.com/danforthcenter/teff-manuscript).477
478
.
CC-BY 4.0 International license
available under a
(which was not certified by peer review) is the author/funder, who has granted bioRxiv a license to display the preprint in perpetuity. It is made
The copyright holder for this preprint
this version posted January 7, 2026.
;
https://doi.org/10.64898/2026.01.0Open asset ↗danforthcenter/teff-manuscriptpdf-raw-page:13 lines:1-76Code / dataset availability confirmedEurope PMC · OpenAlex · checked 15 Sept 2026
Background High-throughput phenotyping is addressing the current bottleneck in phenotyping within breeding programs. Imaging tools are becoming the primary resource for improving the efficiency of phenotyping processes and providing large datasets for genomic selection approaches. The advent of artificial intelligence (AI) brings new advantages by enhancing phenotyping methods using imaging, making them more accessible to breeding programs. In this context, we have developed an open Python workflow for analyzing morphology, color, and morphometric traits using AI, which can be applied to fruits and other plant organs. Results The workflow was implemented in almond (Prunus dulcis (Mill.) D. A. Webb), a species where breeding efficiency is critical due to its long breeding cycle. Over 25,000 kernels, more than 20,000 nuts, and over 600 individuals were phenotyped, making this the largest morphological study conducted in almond so far. The best segmentation and reconstruction approaches achieved error rates below 1%. Weight and area variables enabled accurate estimation of kernel thickness, with a root mean squared error of 0.47. Fifty-five heritable morphological, morphometric, and color traits were identified, highlighting their potential as target traits in breeding programs. Conclusion The proposed workflow demonstrated robust performance across diverse datasets and was effective with limited training data for fine-tuning. Its compatibility with the output of AI-based labeling tools allows users to fully leverage the advantages of these technologies-reducing manual effort, accelerating dataset preparation, and streamlining the fine-tuning process of segmentation models. This flexibility enhances the scalability and practical applicability of the workflow in real-world phenotyping scenarios, especially in the context of breeding programs.
Why it matches plant phenotyping methods植物器官の形態・色・形状特性を抽出するオープンなRGB画像解析ワークフローを開発し、分割・再構成精度も検証しているため、植物フェノタイピング手法が中心です。
abstractwe have developed an open Python workflow for analyzing morphology, color, and morphometric traits using AI, which can be applied to fruits and other plant organs.
Reproduction assets foundThe authors publicly release their almond phenotyping workflow (AlmondCV) as Python/R notebooks on GitHub and as a registered WorkflowHub workflow, covering preprocessing, segmentation model development/deployment, morphology, and morphometric analyses used for this paper's measurements.Code · publiche manual process, which is challenging to automate because of variability in shell hardness and size. This extensive dataset will facilitate future studies aimed at dissecting quantitative traits and implementing genomic selection approaches.
Availability of Source Code and Requirements
Project name: AlmondCV
Project homepage: https://github.com/jorgemasgomez/almondcv2
Operating system(s): Platform independent
Programming language: Python, R
Other requirements: see public environment file released under GNU GPL v3
RRID: SCR_027064
WorkflowHub: https://workflowhub.eu/workflows/1731
Bio.tools: https://bio.tools/almondcv2
Additional Files
Supplementary Table S1 . Article metrics studied relateOpen asset ↗https://github.com/jorgemasgomez/almondcv2lines:222-243Code · publicselection approaches.
Availability of Source Code and Requirements
Project name: AlmondCV
Project homepage: https://github.com/jorgemasgomez/almondcv2
Operating system(s): Platform independent
Programming language: Python, R
Other requirements: see public environment file released under GNU GPL v3
RRID: SCR_027064
WorkflowHub: https://workflowhub.eu/workflows/1731
Bio.tools: https://bio.tools/almondcv2
Additional Files
Supplementary Table S1 . Article metrics studied related to quantitative almond morphological traits.
Supplementary Fig. S1 . Workflow description outlining the steps involved in developing the segmentation model (green) and deploying it (purple).
Supplementary Fig. S2 . YOpen asset ↗https://workflowhub.eu/workflows/1731lines:222-243Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Timely crop stress detection is essential for safeguarding yields and promoting sustainable agriculture. Traditional vegetation indices (e.g., NDVI, EVI) are widely used but remain static, crop-agnostic, and often insensitive to early stress signals. This study proposed RL-VI, a reinforcement learning-based framework that dynamically formulates vegetation indices optimized for rice stress detection. Unlike existing methods, RL-VI integrates Sentinel-2 multispectral imagery with smartphone-captured RGB data, creating the first cross-platform environment where vegetation indices are learned rather than predefined. The reinforcement learning agent adaptively selects stress-sensitive spectral band combinations guided by classification rewards. Experiments on real-world rice fields in Tamil Nadu, India, and benchmark datasets (Indian Pines, wheat salt stress) show that RL-VI achieves an overall accuracy of 89.4% and F1-score of 0.88, outperforming static and machine-learned indices by up to 12%. Importantly, RL-VI enables early stress detection up to 10 14 days before visible symptoms, providing actionable lead time for intervention. The proposed framework is computationally lightweight and scalable to UAV or edge devices, offering a farmer-ready tool for precision agriculture, bridging field-level mobile sensing with satellite monitoring for low-cost, real-time crop health management. Statistical validation using ANOVA (F = 88.24, p < 0.001) and pairwise t-tests (p < 0.001) confirmed RL-VI's superiority, while SHAP analyses emphasized the physiological significance of red-edge and SWIR bands in stress discrimination.
Why it matches plant phenotyping methods植物ストレス状態を推定する動的植生指数と強化学習フレームワークを開発し、実圃場・ベンチマークデータで性能検証しているため、フェノタイピング手法が中心である。
abstractThis study proposed RL-VI, a reinforcement learning-based framework that dynamically formulates vegetation indices optimized for rice stress detection.
Reproduction assets foundThe paper publicly releases its authors' field-captured mobile RGB rice canopy dataset on Kaggle and its full RL-VI analysis code (RL formulation, preprocessing, VI computation, training, evaluation) on GitHub. Sentinel-2 imagery and benchmark datasets are third-party public sources, not paper-specific deposits.Dataset · publicThe Mobile RGB dataset, consisting of field-captured rice canopy images collected by the authors at Polur, Tamil Nadu, India, is publicly available on Kaggle under a CC BY-NC 4.0 license (DOI: [https://doi.org/10.34740/kaggle/dsv/14105754](https:/doi.org/10.34740/kaggle/dsv/14105754)).Open asset ↗Kaggle · 10.34740/kaggle/dsv/14105754html-lines:616-683Code · publicAll custom code developed for this work including the RL-VI (Reinforcement Learning–based Vegetation Index) formulation algorithm, image preprocessing scripts, vegetation index computation modules, model training pipelines, and evaluation routines is openly accessible in a public GitHub repository. The code is available without restriction for non-commercial research use and fully available at Github Repository (https://github.com/Poornisrm/Vegetation-Index.git).Open asset ↗GitHub · Poornisrm/Vegetation-Indexhtml-lines:684-711Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Accurate and efficient leaf trait measurement is essential for plant phenotyping, agronomy, and ecological studies. In this work, we introduce Leaf Analyzer, a novel open-source, fully automated computer vision-based tool for high-throughput leaf morphological trait measurement such as leaf area, dimensions, perimeter, count, and percent damage. Unlike existing methods that rely on strong foreground-background contrast or controlled imaging conditions, Leaf Analyzer employs an unsupervised clustering approach based on the K-means++ clustering algorithm and a novel Leaf Background Separation (LBS) feature, which combines the L∗ and b∗ channels from CIEL∗a∗b∗ color space and the saturation channel from HSV color space. The proposed method and the LBS feature can effectively distinguish leaves from the background across varying lighting conditions, leaf colors, and camera orientations. To evaluate the performance of the new software, we conducted comprehensive quantitative and qualitative comparison experiments with two widely used software tools - Petiole Pro and LeafByte, demonstrating that Leaf Analyzer achieves superior accuracy and consistency, particularly under challenging imaging conditions. Additionally, we explore methods to further enhance measurement precision, including leaf flattening and the integration of supplementary leaf features such as texture features and color specific features. Beyond leaf trait measurement, we showcase the versatility of Leaf Analyzer in a range of applications, including nondestructive plant phenotyping, seed counting, root trait analysis, leaf area measurement for petri dish-grown plants, plant projected silhouette area or crown projection area estimation, leaf damage assessment, and broader plant science applications, making it a valuable tool for researchers working in laboratory and field environments.
Why it matches plant phenotyping methods葉形態形質を自動抽出するオープンソース画像解析ツールの開発と、既存ツールとの定量比較検証が研究の中心であるため。
abstractIn this work, we introduce Leaf Analyzer, a novel open-source, fully automated computer vision-based tool for high-throughput leaf morphological trait measurement such as leaf area, dimensions, perimeter, count, and percent damage.
Reproduction assets foundThe authors state that the Leaf Analyzer source code, installer files, and all data (including evaluation images) used in this study are publicly available on their GitHub repository.Code · publicThe Leaf Analyzer source code, platform-specific installer files, and all data used in this study are publicly available on our GitHub repository at https://github.com/squashking/Leaf-Analyzer .Open asset ↗squashking/Leaf-Analyzerlines:239-277Dataset · publicAll the images used in the evaluation have been published on our Github repository ( https://github.com/squashking/Leaf-Analyzer ).Open asset ↗squashking/Leaf-Analyzerlines:134-155Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Effective pest and disease detection plays a crucial role in minimizing crop losses and improving decision-making in precision agriculture. Among the most destructive pests affecting maize crops globally is the Fall Army Worm (FAW), known for its rapid spread and high impact on yield. Existing detection practices often rely on manual scouting, which can be inefficient, labour intensive and prone to human error. This study proposes a novel deep learning based framework for the automatic classification of FAW infested and healthy maize crops by integrating RGB and thermal image modalities. The core objective is to enhance detection accuracy through multimodal image fusion. A hybrid DNN-ViT model is introduced, combining two complimentary pipelines: (i) feature-level fusion, where CNN extracted features from RGB and thermal images are fused and classified using a Deep Neural Network (DNN) and (ii) image-level fusion, where a 6 channel RGB-thermal image is directly processed using a modified Vision Transformer (ViT). Experimental results demonstrate that the fused model achieved superior performance with an accuracy of 0.98, precision, recall and F1-score of 0.98 and AUC-ROC of 0.98 on the test set, outperforming models trained on RGB-only, thermal-only and unfused data. The ablation study confirms the effectiveness of multimodal fusion, with the no-fusion model showing significantly lower performance (accuracy-0.60 and AUC-ROC-0.67). This work highlights the benefits of integrating complementary data sources for robust crop health monitoring. Future research will explore enhanced fusion strategies, environmental robustness and field level deployment to validate the model's practical applicability.
Why it matches plant phenotyping methodsRGB・熱画像融合によるFAW被害・健全状態の画像判定モデルを開発し、融合方式や性能を比較検証しているため、植物の健康状態を取得する方法が中心である。
abstractThis study proposes a novel deep learning based framework for the automatic classification of FAW infested and healthy maize crops by integrating RGB and thermal image modalities.
Reproduction assets foundThe paper's paired RGB/thermal maize FAW image dataset is publicly deposited on Figshare (part of a peer-reviewed data publication), and the authors' custom Python analysis code is released as a public supplementary file (Supplementary Code.zip) with explicit availability language. The Figshare URL matches an allowed, Dataset · publicThe dataset has been made publicly available in the Figshare Data repository as a part of a peer reviewed data publication54. Detailed information on data acquisition, sensor specifications, environmental conditions and annotation protocols is provided in the associated data article. The dataset can be accessed at: https://figshare.com/s/677d2384ba6e02db9230 (10.6084/m9.figshare.28388018).Open asset ↗Figshare · 10.6084/m9.figshare.28388018html-lines:324-345Code · publicThe custom python code developed for this study is available as supplementary file (“Supplementary Code.zip”) and includes all scripts necessary to reproduce the multimodal feature fusion, image-level fusion and ablation experiments described in the manuscript. The dataset used is publicly available on Figshare. All dependencies are listed within the code file. Readers can execute the python script to reproduce the reported results.Open asset ↗html-lines:324-345Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Introduction Cassava is one of the most widely cultivated crops worldwide, renowned for its rich natural ingredients and numerous nutritional benefits. However, the complex interdependencies among its features often pose challenges in image restoration and segmentation, particularly when identifying disease regions. In previous work, this manifested as higher false positives and misidentification of non-relevant areas, leading to a decline in precision and accuracy. Methods To address these issues, this study proposed an efficient artificial intelligence-powered image analysis system that leverages optimal feature selection with a HyperCapsInception-ResNet-V2-CNN model to enhance disease detection accuracy. Initially, the dataset was collected from the Kaggle repository, its name was Cassava Leaf Disease Classification, and it comprised 21,367 different images. Our approach began by normalizing cassava plant disease data using adaptive Gaussian Otsu thresholding. Histogram color evaluation and iterative clustering fragmentation were then applied to better isolate disease variations and improve precision. Subsequently, Cascaded Canny Edge Segmentation (CCES) was used to effectively segment the disease region. The disease variation properties were further evaluated using the Optimal Spider Swarm Intelligence Technique (OSSIT) to reduce irrelevant feature dimensions. For classification, the HyperCapsInception-ResNet-V2-CNN model was employed to categorize cassava diseases, including cassava bacterial blight (CBB), cassava mosaic disease (CMD), cassava green mite (CGM) disease, and cassava brown streak disease (CBSD), along with regular and abnormal leaf states. Results The proposed method's simulation results achieved 98.15% accuracy, a 97.22% F1-score, and 96.02% precision, outperforming other traditional methods such as EfficientNetB3, AlexNet, Faster-RCNN, and InceptionV3. Discussion Both optimized feature selection with OSSIT and hybrid HyperCapsInception-ResNet-V2-CNN architecture significantly enhanced the detection reluctance and the classification of the data. These findings indicate that the proposed system is effective in the automated detection of cassava disease and has a high potential of being practical in agricultural practices especially in precision farming and early detection of diseases.
Why it matches plant phenotyping methodsカッサバ葉画像から病変領域を分割・抽出し、病害状態を分類する画像解析手法の開発が研究の中心であるため、植物表現型手法として採用。
abstractCascaded Canny Edge Segmentation (CCES) was used to effectively segment the disease region.
Reproduction assets foundThe paper uses the public Kaggle 'Cassava Leaf Disease Classification' dataset (21,367 cassava leaf images) as its phenotyping input; the dataset is publicly downloadable at the authors' stated URL, which matches an allowed URL.Dataset · publicThe Cassava Leaf Disease Classification dataset is available on Kaggle and comprises 21,367 images. The images have an average resolution of 512 × 512 pixels. The data are split into training and test sets, enabling machine learning algorithms to be trained and tested to accurately detect diseases. The data are available for download from Kaggle: https://www.kaggle.com/datasets/nirmalsankalana/cassava-leaf-disease-classification .Open asset ↗Kaggle · cassava-leaf-disease-classificationlines:523-601Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
TomatoGreenhouseMultimodalRGB / grayscaleMultispectral / hyperspectralFruitClassificationSegmentationGrowth / development / phenology
Computer vision and multispectral imaging have increasingly become essential tools in modern precision agriculture. Accurate ripeness assessment is critical for yield optimization, reducing post-harvest losses, and enabling automated harvesting systems. However, traditional RGB-based approaches struggle to differentiate subtle maturity changes, and existing solutions often fail under varying lighting, occlusion, or cultivar-specific conditions. To address these challenges, this study focuses on the integration of complementary spectral cues for reliable tomato ripeness evaluation. The work utilizes a curated RGB-NIR tomato dataset comprising 224 hyperspectral samples, processed into aligned multimodal image pairs with balanced ripeness categories.The proposed TomatoRipen-MMT model employs a multimodal Transformer framework with dual encoders, cross-spectral attention, and a joint decoder to fuse spatial and biochemical cues. The novelty of the methodology lies in the dynamic cross-attention mechanism, which learns inter-modal dependencies between RGB and NIR signals for enhanced ripeness interpretation. Performance metrics including accuracy, precision, recall, F1-score, mIoU, and AUC were used to comprehensively evaluate the system. Experimental results demonstrate that TomatoRipen-MMT significantly outperforms all baseline RGB-only, NIR-only, and fusion methods, achieving 94.8% classification accuracy and 82.6% mIoU. These findings establish the effectiveness of multimodal Transformers for robust, high-precision fruit maturity assessment in controlled and greenhouse environments.
Why it matches plant phenotyping methodsトマト果実の成熟度という植物器官の状態を、RGB・NIR画像融合とTransformerで推定する手法を開発・評価しており、フェノタイピング手法が中心です。
abstractThe proposed TomatoRipen-MMT model employs a multimodal Transformer framework with dual encoders, cross-spectral attention, and a joint decoder to fuse spatial and biochemical cues.
Reproduction assets foundThe paper's phenotyping analysis is built on a publicly available USDA/NAL hyperspectral tomato dataset, explicitly linked in the Data Availability statement with an exact URL match. No author code or model checkpoints are disclosed.Dataset · publicThe dataset analyzed in this study is publicly available at the https://agdatacommons.nal.usda.gov/articles/dataset/Data_from_b_Hyperspectral_Imaging_Analysis_for_Early_Detection_of_Tomato_Bacterial_Leaf_Spot_Disease_b_/26046328.Open asset ↗26046328html-lines:1038-1053Code / dataset availability confirmedOpenAlex · arXiv · checked 6 Sept 2026
High resolution phenotyping at the level of individual leaves offers fine-grained insights into plant development and stress responses. However, the full potential of accurate leaf tracking over time remains largely unexplored due to the absence of robust tracking methods-particularly for structurally complex crops such as canola. Existing plant-specific tracking methods are typically limited to small-scale species or rely on constrained imaging conditions. In contrast, generic multi-object tracking (MOT) methods are not designed for dynamic biological scenes. Progress in the development of accurate leaf tracking models has also been hindered by a lack of large-scale datasets captured under realistic conditions. In this work, we introduce CanolaTrack, a new benchmark dataset comprising 5,704 RGB images with 31,840 annotated leaf instances spanning the early growth stages of 184 canola plants. To enable accurate leaf tracking over time, we introduce LeafTrackNet, an efficient framework that combines a YOLOv10-based leaf detector with a MobileNetV3-based embedding network. During inference, leaf identities are maintained over time through an embedding-based memory association strategy. LeafTrackNet outperforms both plant-specific trackers and state-of-the-art MOT baselines, achieving a 9% HOTA improvement on CanolaTrack. With our work we provide a new standard for leaf-level tracking under realistic conditions and we provide CanolaTrack - the largest dataset for leaf tracking in agriculture crops, which will contribute to future research in plant phenotyping. Our code and dataset are publicly available at https://github.com/shl-shawn/LeafTrackNet.
Why it matches plant phenotyping methods葉レベルの時系列追跡という植物表現型取得手法を開発し、専用ベンチマークデータセットで評価しているため、方法が中心である。
abstractTo enable accurate leaf tracking over time, we introduce LeafTrackNet, an efficient framework that combines a YOLOv10-based leaf detector with a MobileNetV3-based embedding network.
Reproduction assets foundThe authors explicitly state that the CanolaTrack dataset (5,704 annotated RGB images of 184 canola plants), the LeafTrackNet code, and trained model weights are publicly available at their GitHub repository.Code · publicOur code and dataset are publicly
available at https://github.com/shl-shawn/LeafTrackNet.Open asset ↗shl-shawn/LeafTrackNet · LeafTrackNetpdf-page:1 lines:1-53Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Background Developing an effective machine vision system is crucial to successfully deploying robotic inspection in open field conditions and controlled environments like greenhouses. Robotic arms with vision-based deep learning models offer an efficient, real-time, non-invasive crop monitoring solution. In agricultural settings, they enable consistent, automated inspection under varying conditions, reduce labor dependency, and support early disease detection, enhancing productivity and sustainability in precision farming. Although considerable progress has been made in computer vision-based approaches, significant challenges persist in developing models that reliably perform under the diverse and variable conditions encountered in real-world agricultural settings. Method Within the domain of precision agriculture, we introduce an advanced robotic system for the detection of plant diseases, utilizing an innovative model based on deep learning principles. This system introduces an algorithm for real-time analysis, called as Strawberry Leaf Disease Inspection (SLDI). The algorithm integrates the use of Receptive Guided Channel Attention (RGCA) alongside a Deep Context Aggregator (DCA), designed to significantly improve the characterization and representation of feature sets, thereby enhancing the overall accuracy and efficiency of disease identification. To optimize the system performance and preserve real-time performance, a Multi-Scale Feature Fusion Module (MSFF) is proposed that facilitates a comprehensive multi-level representation, enabling the model to capture disease symptoms promptly. The SLDI algorithm is deployed on a robotic platform equipped with an RGB camera, enabling real-time, in-field inspection of strawberry crops. Results The proposed system is trained on two publicly available datasets, PlantDoc and PlantVillage. It attains a precision of 91.10% and a recall of 88.50%, while maintaining a real-time processing speed of 76.50 frames per second (fps). Experimental field inspection of strawberry studies demonstrates that the proposed model significantly outperforms existing approaches in accuracy and efficiency.
Why it matches plant phenotyping methodsイチゴ葉の病徴をRGB画像と深層学習でリアルタイム検出するアルゴリズムおよびロボットプラットフォームを開発・評価しており、植物病害状態の表現型取得が中心である。
abstractwe introduce an advanced robotic system for the detection of plant diseases, utilizing an innovative model based on deep learning principles.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe publicly avail- able datasets can be accessed at [ www.plantvillage.org ] and [ https://github.com/pratikkayal/PlantDoc-Dataset ].Open asset ↗pratikkayal/PlantDoc-Datasetlines:271-381Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
Abstract High‐throughput and noninvasive phenotyping methods are promising technology for improving efficiency in plant research and breeding. In this study, we evaluated the performance of a digital phenotyping system (DPS) based on three‐dimensional (3D) model reconstruction for quantifying key growth traits in rice ( Oryza sativa ). The DPS was used to estimate plant height, biomass, color, leaf morphology, and tiller angle in four rice varieties (Koshihikari, Nipponbare, PL9, and Tachiaoba). The results show high accuracy and correlation between manually measured and DPS‐derived traits. Notably, the 3D volume analysis can quantify biomass accumulation and growth dynamics and revealed distinct differences among varieties. The strong correlation between the green‐red normalized difference index (a red‐green‐blue‐based index) and soil plant analysis development also demonstrated the viability of the system in monitoring leaf color without using a multispectral instrument. The analysis also captured growth patterns over time, including canopy development and senescence, which are often challenging to quantify through manual measurements alone. Furthermore, the tiller angle estimation derived from DPS provided an alternative method to plant architecture evaluation, demonstrating its potential for use in breeding programs aimed to optimize canopy structure. These findings establish DPS as a reliable and scalable tool for a digital phenotyping platform that enables comprehensive trait analysis with reduced labor and increased precision and the capability to continuously monitor plant growth and biomass accumulation. This study shows the potential of this novel digital tool for automating manual measurements, which can increase efficiency and expedite research and breeding in rice and other crops.
Why it matches plant phenotyping methods3Dモデル再構築に基づくデジタル表現型解析システムを開発・評価し、イネの複数形質を手測定と比較検証しているため、方法が研究の中心です。
abstractwe evaluated the performance of a digital phenotyping system (DPS) based on three‐dimensional (3D) model reconstruction for quantifying key growth traits in rice
Reproduction assets foundThe paper's data availability statement explicitly says the analysis code is openly available on GitHub at the authors' repository Rice_VTGa.O, which contains the digital phenotyping/leaf-tracing analysis code for this study. No phenotype dataset or image deposit is stated.Code · publicGrant Number 39 [2023] and 38 [2024]),
and Microbiome and Metabolome Control Project, University
of Miyazaki, Japan.
C O N F L I C T O F I N T E R E S T S TAT E M E N T
The authors declare no conflicts of interest.
DATA AVA I L A B I L I T Y S TAT E M E N T
Codes used for analysis in this study are openly available on
GitHub at https://github.com/sandysan42/Rice_VTGa.O RC I D
SorawichPongpiyapaiboon https://orcid.org/0000-0002-9314-8375
Kenji Aoki https://orcid.org/0000-0001-7003-1994
MasatsuguHashiguchi https://orcid.org/0000-0003-0637-2780
RyoAkashi https://orcid.org/0000-0002-5651-8285
Yuji Kishima https://orcid.org/0000-0002-0942-3371
Hidenori Tanaka https://orcid.org/0000-0002-4237-8154Open asset ↗https://github.com/sandysan42/Rice_VTGa.O · Rice_VTGa.Opdf-raw-page:13 lines:1-84Code / dataset availability confirmedCrossref · Europe PMC · checked 6 Sept 2026
In the context of precision agriculture, high-throughput phenotyping (HTP) aims to rapidly and effectively identify factors that affect crop yield, enabling timely and appropriate interventions. However, interpreting data from HTP remains challenging. We performed a proximal red-green-blue (RGB)-based HTP on several tomato genotypes exposed to abiotic stress (drought) or biotic stress induced by tomato spotted wilt virus (TSWV), Pseudopyrenochaeta lycopersici (corky root rot; CRR), or Meloidogyne incognita (root-knot nematode; RKN). We aimed to determine if RGB-based HTP is effectively able to: a) distinguish the effects of biotic from abiotic stress; b) differentiate resistant/tolerant from susceptible genotypes. Our HTP data analysis produced 12 morphometric and eight colorimetric indices. Principal Component Analysis (PCA; P < 0.0001; 83 % variation explained by three PCs) showed that factors such as shoot area solidity and certain color-based indices, including the senescence index and green area, effectively differentiated biotic from abiotic stress. Morphometric parameters, including plant height, projected shoot area, and convex hull area, proved to be applicable for identifying the stress status regardless of the type of stress. HTP effectively distinguished the genotype resistant to TSWV from the susceptible ones. This task was more challenging for below-ground stresses like CRR and RKN. Different profiles of HTP indices were observed among the genotypes assayed for drought tolerance, indicating variability in their ability to withstand drought conditions. In conclusion, our findings highlight the value of RGB-based HTP as a tool for precision farming of tomatoes, enabling the identification of both biotic and abiotic stressors.
Why it matches plant phenotyping methodsトマトのRGBベース高スループット表現型解析を用い、形態・色彩指標の抽出と、ストレス識別および遺伝子型判別への有効性を評価しており、フェノタイピング手法が研究の中心である。
abstractWe performed a proximal red-green-blue (RGB)-based HTP on several tomato genotypes exposed to abiotic stress (drought) or biotic stress induced by tomato spotted wilt virus (TSWV), Pseudopyrenochaeta lycopersici (corky root rot; CRR), or Meloidogyne incognita (root-knot nematode; RKN).
Reproduction assets foundThe paper's HTP dataset (20 indices from five stress experiments) is stated to be available in the supplementary material hosted at the article DOI, which qualifies as a paper-specific public phenotype dataset. However, the analysis code has no public deposit: it is only available from the corresponding author upon 'a'Dataset · publicThe data collected and used in this study are available in the supplementary material. The code used for analysis is available from the corresponding author, GBu, upon reasonable request.Open asset ↗lines:400-518Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
In the arid cultivation region of Xinjiang, China, shrinkage disease severely compromises the quality, yield, and market value of jujube. Published research has achieved high accuracy in detecting larger lesions using RGB imaging and hyperspectral imaging (HSI). However, these methods lack sensitivity in detecting early and subtle symptoms of disease. In this study, a multi-source data fusion strategy combining RGB imaging and HSI was proposed for non-destructive and high-precision detection of early-stage jujube shrinkage disease. Firstly, a total of 317 fruits of the 'Junzao' cultivar were collected during multiple stages of natural infection, covering early-stage shrinkage disease detection across different growth stages, including both green and mature red fruits. Secondly, morphological features were extracted from RGB images in multiple dimensions, while a three-stage feature selection strategy combining Principal Component Analysis (PCA), the Successive Projections Algorithm (SPA), and the Genetic Algorithm (GA) was implemented to identify four key wavelengths from HSI. Thirdly, a hybrid convolutional neural network-multilayer perceptron (CNN-MLP) architecture was constructed, with dynamic feature weighting employed to achieve effective multimodal fusion and optimize detection performance. Experimental results demonstrated that compared to the MLP and CNN models, the proposed method achieved approximately 8.0% and 5.4% improvements in accuracy and 38.6% and 32.4% improvements in F1 scores, respectively. It offers a robust and scalable solution for early disease detection and postharvest quality assessment in jujube production.
Why it matches plant phenotyping methodsRGB画像・HSIから果実の病斑形態と分光特徴を抽出し、マルチモーダル深層学習で植物病害状態を検出する手法の開発・性能評価が中心であるため。
abstracta multi-source data fusion strategy combining RGB imaging and HSI was proposed for non-destructive and high-precision detection of early-stage jujube shrinkage disease.
Reproduction assets foundThe paper's Data Availability Statement points to a public GitHub repository containing the study's dataset (RGB images and hyperspectral data of jujube fruits). No separate analysis code availability is stated, but the deposited dataset is a paper-specific, publicly actionable asset.Dataset · publicThe data from this study are publicly available. The dataset is available at https://github.com/2484733079/Early-detection-of-Jujube-Shrinkage-Disease-by-Multi-source-Data-on-Multi-task-Deep-Network.git (accessed on 13 October 2025).Open asset ↗2484733079/Early-detection-of-Jujube-Shrinkage-Disease-by-Multi-source-Data-on-Multi-task-Deep-Networklines:365-367Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Field / plotRGB / grayscaleLeafClassificationDisease symptoms / severity
Agriculture is key to sustaining life and economic development, and crops like turmeric are essential for everyday application and economic viability. Turmeric crops are very prone to foliar disease, which has a great impact on yield and quality. Early detection of the diseases is of great significance to farming practitioners since manual observation is generally time-consuming and unreliable. To surpass this challenge, a comprehensive dataset has been developed to facilitate the generation of an automatic disease recognition system. The dataset comprises 865 images of original turmeric leaves and 3496 images of augmented turmeric leaves, both infected and healthy, with four classes of diseases: aphid attack, blotch, leaf spot, and healthy leaves. All the leaves were captured from different angles to offer variability and clarity, with particular emphasis on high-quality and diversified data. Through this dataset, a precise and efficient identification process can be realized, which will aid agriculture practitioners in recognizing diseases at an early stage and reducing crop losses. This paper seeks to improve agricultural productivity, crop quality, and the overall growth and sustainability of the agricultural economy using state-of-the-art deep learning models, such as EfficientNetB7 and ResNet152, for precise and interpretable disease classification. The proposed approach achieves high accuracy, with EfficientNetB7 attaining 98.67 % and ResNet152 reaching 97.87 %. Additionally, this research lays the groundwork for scalable and affordable disease detection technology, allowing agricultural practitioners to maximize crop yield and achieve long-term food security using smart tools.
Why it matches plant phenotyping methodsターメリック葉の病害状態を画像から分類するデータセットと深層学習手法が研究の中心であり、植物病害フェノタイピングに該当する。
abstracta comprehensive dataset has been developed to facilitate the generation of an automatic disease recognition system.
Reproduction assets foundThe paper is a Data in Brief article describing a turmeric leaf disease image dataset (865 original and 3496 augmented smartphone images) collected by the authors, with the dataset publicly deposited on Mendeley Data. This is a paper-specific, publicly available plant image/phenotyping asset with a direct URL matching,Dataset · publicEkdonto village turmeric field in Pabna (latitude: 24.071123635779465, longitude: 89.34558471048882)
4. Tebunia village turmeric field in Pabna (latitude: 24.070634252228754, longitude: 89.20332505175169)
Data accessibility
Repository name: Mendeley Data
Data identification number: DOI: 10.17632/jtttfbx342.1
Direct URL to data: https://data.mendeley.com/datasets/jtttfbx342/1
1.
Value of the Data
•
This dataset generates a wealth of visual information on leaf diseases of turmeric, which is a good resource to train machine learning models. The models can be constructed to differentiate well between healthy and diseased leaves so that the diseases can be diagnosed early and accurately in agricuOpen asset ↗Mendeley Data · 10.17632/jtttfbx342.1lines:1-47Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 6 Sept 2026
Developing crop varieties that maintain productivity under drought is essential for future food security. Here, we investigated the potential of time-resolved high-throughput phenotyping to predict harvest-related traits and identify drought-stressed plants. Six barley lines ( Hordeum vulgare ) were grown in a greenhouse environment with well-watered and drought treatments, and dynamically phenotyped using RGB, thermal infrared, chlorophyll fluorescence, and hyperspectral imaging sensors. A temporal phenomic classification model accurately distinguished between drought-treated and control plants, achieving high accuracy (classification accuracy ≥0.97) even when relying solely on predictors from the early drought response phase. Canopy temperature depression at the early stage and RGB-derived plant size estimates at the late stage emerged as key classification features. A temporal phenomic prediction model of harvest-related traits achieved particularly high mean R 2 values for total biomass dry weight (0.97) and total spike weight (0.93), with RGB plant size estimators emerging as important predictors. Importantly, prediction accuracy for these traits remained high (R 2 ≥ 0.84) even when restricted to early developmental phase data, including the stem elongation stage. Models trained on pooled drought and control data outperformed single-treatment models and maintained high predictive power across treatments. Together, these findings highlight the value of integrating high-throughput phenotyping with temporal modeling to enable earlier, more cost-effective selection of drought-resilient genotypes and demonstrate the broader potential of phenomics-driven strategies for accelerating crop improvement under stress-prone environments.
Why it matches plant phenotyping methodsRGB・熱赤外・蛍光・ハイパースペクトルによる時系列表現型取得と、収穫形質予測モデルの構築・評価が研究の中心であるため。
abstractdynamically phenotyped using RGB, thermal infrared, chlorophyll fluorescence, and hyperspectral imaging sensors
Reproduction assets foundThe authors explicitly state that the data and analysis pipeline code for this barley phenotyping study is publicly available on GitHub at https://github.com/hatiez/barley-TPP-pipeline. This is a paper-specific computational asset (the temporal phenomic classification/prediction pipeline) with an authors' public URL. DCode · publicThe data and analysis pipeline code is available on https://github.com/hatiez/barley-TPP-pipeline .Open asset ↗https://github.com/hatiez/barley-TPP-pipelinelines:390-415Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
GrapevineField / plotRGB / grayscaleObject detectionGrowth / development / phenology
Bud break is a critical phenological stage in muscadine grapevines, marking the start of the growing season and the increasing need for irrigation management. Real-time bud detection enables irrigation to match muscadine grape phenology, conserving water and enhancing performance. This study presents BudCAM, a low-cost, solar-powered, edge-computing camera system based on Raspberry Pi 5 and integrated with LoRa radio board, developed for real-time bud detection. Nine BudCAMs were deployed at Florida A&M University Center for Viticulture and Samll Fruit Research from mid February to mid March, 2024, monitoring three wine cultivars (A-27, noble, and Floriana) with three replicates each. Muscadine grape canopy images were captured every 20 minutes between 7:00 to 19:00, generating 2656 high-resolution (4656×3456 pixels) bud break images as database for bud detection algorithm development. The dataset was divided into 70% training, 15% validation, and 15% test. YOLOv11 models were trained using two primary strategies: a direct single-stage detector on tiled raw images and a refined two-stage pipeline that first identifies the grapevine cordon. Extensive evaluation of multiple model configurations identified top performers for both the single-stage (mAP@0.5=86.0%) and two-stage (mAP@0.5=85.0%) approaches. Further analysis revealed that preserving image scale via tiling was superior to alternative inference strategies like resizing or slicing. Field evaluations during the 2025 growing season confirmed the system’s effectiveness, with the two-stage model showing greater robustness to environmental noise like lens fog. A time-series filter smooths the raw daily counts to reveal a clear phenological trend for visualization. In its final deployment, the autonomous BudCAM system captures an image, runs inference on-device, and transmits the bud count in under three minutes, demonstrating a complete, field-ready solution for precision vineyard management.
Why it matches plant phenotyping methodsブドウの芽数・芽吹きという植物の表現型を、エッジカメラ、画像データセット、検出アルゴリズム、時系列処理で取得・推定するシステムを開発・評価しており、方法が研究の中心である。
abstractThis study presents BudCAM, a low-cost, solar-powered, edge-computing camera system based on Raspberry Pi 5 and integrated with LoRa radio board, developed for real-time bud detection.
This study aims to develop an efficient and accurate deep learning-based model for the classification of plant leaf diseases using Convolutional Neural Networks (CNN). The objective is to automate disease detection in agricultural crops to assist farmers and agricultural experts in early and reliable diagnosis. The model is trained on the publicly available “Plant Village CLAHE Processed Data” dataset, which includes high-resolution RGB images of healthy and diseased plant leaves. Images are preprocessed through resizing (128×128), normalized, and split into training, validation, and test sets. Data augmentation techniques such as flipping, zooming, and rotation are used to improve generalization. A custom CNN architecture comprising convolutional, pooling, dense, and dropout layers is employed and trained using the Adam optimizer. Exploratory Data Analysis (EDA) ensures data quality and balance. The model achieves impressive results, with 93% test accuracy, 91% precision, 93% recall, and an F1-score of 92%, indicating robust performance in identifying diverse plant diseases. Training accuracy reached 94.64% with a validation accuracy of 92.95%, confirming minimal overfitting. These results validate the model’s reliability for practical use in smart farming solutions, especially in mobile or IoT-based applications for real-time disease monitoring and precision agriculture.
Why it matches plant phenotyping methods植物葉の病害状態を画像から分類するCNN手法の開発・性能評価が研究の中心であり、植物フェノタイピング手法として適格。
abstractThis study aims to develop an efficient and accurate deep learning-based model for the classification of plant leaf diseases using Convolutional Neural Networks (CNN).
Reproduction assets foundThe paper's plant-phenotyping input is the publicly available Kaggle 'Plant Village CLAHE Processed Data' image dataset, explicitly named and linked by the authors as the data used for all model training and evaluation. No author analysis code or trained model is released.Dataset · publicThe dataset used in this study is the publicly available “Plant Village CLAHE Processed Data” hosted on Kaggle
(https://www.kaggle.com/datasets/rahimanshu/plant-village-clahe-processed-data).Open asset ↗Kaggle · plant-village-clahe-processed-datapdf-page:5 lines:1-48Code / dataset availability confirmedEurope PMC · bioRxiv · checked 6 Sept 2026
RGB / grayscaleLeafAnnotation / quality controlClassificationGrowth / development / phenology
ABSTRACT Plant phenology dictates many aspects of community function and ecosystem dynamics. Yet, global phenology data are still limited, especially in areas lacking monitoring programs. Here we present a new data resource, PhenoVision–Leaf, which extends a computer-vision pipeline utilizing iNaturalist digital image vouchers to produce global-scale leaf phenophase data for deciduous, woody genera. We first discuss our implementation of a new human annotation framework for leaf phenology on iNaturalist, aligning with phenophase definitions used by the larger phenology community. We then showcase the use of 165,988 crowdsourced annotated records to train a Vision Transformer model with a two-stage regime to maximize accuracy across single- and multi-image records. This approach extends Phenovision from scoring individual images to aggregating at the iNaturalist record level, better aligning with human annotation processes. Post-hoc validation showed high performance for detecting present green and colored leaves (>98% accuracy), and reasonable accuracy for breaking leaf buds (>87% accuracy). Applying PhenoVision–Leaf to over 26 million iNaturalist records yielded 5.6 million record-level phenology observations across 6,500 species and 57 families, filling geographic and taxonomic gaps. These data, now accessible through the Phenobase portal, establish a foundation for near real-time monitoring of leaf phenology, supporting global-scale synthesis analyses.
Why it matches plant phenotyping methods葉のフェノロジー状態を画像から推定するコンピュータビジョン手法と、注釈・学習・検証・大規模データ生成基盤が研究の中心であるため。
abstractwe present a new data resource, PhenoVision–Leaf, which extends a computer-vision pipeline utilizing iNaturalist digital image vouchers to produce global-scale leaf phenophase data
Reproduction assets foundThe paper's PhenoVision–Leaf record-level leaf phenology dataset (5.6M machine-labeled observations) is publicly available via the Phenobase portal, and the underlying iNaturalist images used for training and machine labeling are available through the iNaturalist open data repository on AWS. No author analysis code or Dataset · publicAll images associated with these records were
downloaded using iNaturalist’s open data repository on AWS
(https://registry.opendata.aws/inaturalist-open-data/).Open asset ↗pdf-page:4 lines:1-44Code / dataset availability confirmedOpenAlex · arXiv · checked 6 Sept 2026
Accurate plant segmentation in thermal imagery remains a significant challenge for high throughput field phenotyping, particularly in outdoor environments where low contrast between plants and weeds and frequent occlusions hinder performance. To address this, we present a framework that leverages synthetic RGB imagery, a limited set of real annotations, and GAN-based cross-modality alignment to enhance semantic segmentation in thermal images. We trained models on 1,128 synthetic images containing complex mixtures of crop and weed plants in order to generate image segmentation masks for crop and weed plants. We additionally evaluated the benefit of integrating as few as five real, manually segmented field images within the training process using various sampling strategies. When combining all the synthetic images with a few labeled real images, we observed a maximum relative improvement of 22% for the weed class and 17% for the plant class compared to the full real-data baseline. Cross-modal alignment was enabled by translating RGB to thermal using CycleGAN-turbo, allowing robust template matching without calibration. Results demonstrated that combining synthetic data with limited manual annotations and cross-domain translation via generative models can significantly boost segmentation performance in complex field environments for multi-model imagery.
Why it matches plant phenotyping methods熱画像による作物・雑草の分割を対象とし、合成データ、少数の実画像、GANによるモダリティ変換を組み合わせた高スループット表現型取得手法を開発・評価している。
abstractAccurate plant segmentation in thermal imagery remains a significant challenge for high throughput field phenotyping
Reproduction assets foundThe paper states its synthetic and real phenotyping image datasets (cowpea/weed RGB and thermal imagery with segmentation masks) are publicly available through the AgML framework, with an explicit authors' URL. Helios is a general simulation tool, not a paper-specific asset.Dataset · publicSynthetic and real datasets are available through AgML 1 1
1
https://github.com/Project-AgML/AgML [ 50 ] , a centralized framework for agricultural machine learning.Open asset ↗Project-AgML/AgMLlines:339-434Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
Understanding how plants capture light and maintain their energy balance is crucial for predicting how ecosystems respond to environmental changes. By monitoring leaf inclination angle distributions (LIADs), we can gain insights into plant behaviour that directly influences ecosystem functioning. LIADs affect radiative transfer processes and reflectance signals, which are essential components of satellite-based vegetation monitoring. Despite their importance, scalable methods for continuously observing these dynamics across different plant species throughout day-night cycles are limited. We present AngleCam V2, a deep learning model that estimates LIADs from both RGB and near-infrared (NIR) night-vision imagery. We compiled a dataset of over 4,500 images across 200 globally distributed species to facilitate generalization across taxa. Moreover, we developed a method to simulate pseudo-NIR imagery from RGB imagery to enable an efficient training of a deep learning model for tracking LIADs across day and night. The model is based on a vision transformer architecture with mixed-modality training using the RGB and the synthetic NIR images. AngleCam V2 achieved substantial improvements in generalization compared to AngleCam V1 (R 2 = 0.62 vs 0.12 on the same holdout dataset). Phylogenetic analysis across 100 genera revealed no systematic taxonomic bias in prediction errors. Testing against leaf angle dynamics obtained from multitemporal terrestrial laser scanning demonstrated the reliable tracking of diurnal leaf movements (R 2 = 0.61-0.75) and the successful detection of water limitation-induced changes over a 14-day monitoring period. This method enables continuous monitoring of leaf angle dynamics using conventional cameras, enabling applications in ecosystem monitoring networks, plant stress detection, interpreting satellite vegetation signals, and citizen science platforms for global-scale understanding of plant structural responses.
Why it matches plant phenotyping methods葉の傾斜角分布という植物形質を画像から推定する深層学習手法を開発し、大規模データセット、既存モデル比較、レーザースキャンによる検証、水ストレス下での追跡評価まで実施しており、フェノタイピング手法が研究の中心です。
abstractWe present AngleCam V2, a deep learning model that estimates LIADs from both RGB and near-infrared (NIR) night-vision imagery.
Reproduction assets foundThe paper's Data Availability Statement explicitly provides public access to the authors' analysis code (Anonymous GitHub), the phenotyping image/trait dataset (Zenodo), and the pretrained AngleCam V2 model weights (Zenodo). All three are paper-specific, public, and actionable.Code · publicLK and TK conceived the ideas, designed the methodology, and led the analysis. TK, JP, RR, JF, LK,
26
and DL collected the data. LK and TK led the writing of the manuscript. All authors contributed
27
critically to the drafts and gave final approval for publication.
28
Data Availability Statement
29
The code is available here (https://anonymous.4open.science/r/AngleCamV2-2B38). The data
30
is available at (https://doi.org/10.5281/zenodo.17086253). The pretrained model is available
31
at (https://doi.org/10.5281/zenodo.17101166).32
Conflicts of Interest
33
All authors declare that they have no conflicts of interest.
34
2
.
CC-BY 4.0 International license
perpetuity. It is made available underOpen asset ↗anonymous.4open.science/r/AngleCamV2-2B38pdf-raw-page:2 lines:1-30Dataset · publicK, JP, RR, JF, LK,
26
and DL collected the data. LK and TK led the writing of the manuscript. All authors contributed
27
critically to the drafts and gave final approval for publication.
28
Data Availability Statement
29
The code is available here (https://anonymous.4open.science/r/AngleCamV2-2B38). The data
30
is available at (https://doi.org/10.5281/zenodo.17086253). The pretrained model is available
31
at (https://doi.org/10.5281/zenodo.17101166).32
Conflicts of Interest
33
All authors declare that they have no conflicts of interest.
34
2
.
CC-BY 4.0 International license
perpetuity. It is made available under a
preprint (which was not certified by peer review) is the author/funder, whoOpen asset ↗zenodo · 10.5281/zenodo.17086253pdf-raw-page:2 lines:1-30Model / weights · publicanuscript. All authors contributed
27
critically to the drafts and gave final approval for publication.
28
Data Availability Statement
29
The code is available here (https://anonymous.4open.science/r/AngleCamV2-2B38). The data
30
is available at (https://doi.org/10.5281/zenodo.17086253). The pretrained model is available
31
at (https://doi.org/10.5281/zenodo.17101166).32
Conflicts of Interest
33
All authors declare that they have no conflicts of interest.
34
2
.
CC-BY 4.0 International license
perpetuity. It is made available under a
preprint (which was not certified by peer review) is the author/funder, who has granted bioRxiv a license to display the preprint in
The copyright holder for tOpen asset ↗zenodo · 10.5281/zenodo.17101166pdf-raw-page:2 lines:1-30Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Rice, a staple meal for about half of the world's population, is critical to global food security, especially in Asia. However, diseases have a severe impact on rice production, resulting in significant yield losses or outright crop failure. Traditional techniques of identifying rice diseases are time-consuming, labor-intensive, and rely heavily on specialist knowledge. As a result, a rapid, cost-effective, and automated method for detecting rice illnesses is critical for modernizing agricultural techniques and ensuring sustainable food production. This paper presents a novel hybrid deep-learning and machine-learning framework for automatically identifying rice plant diseases from leaf photos. We extracted deep features from rice leaf images using pre-trained CNN models-MobileNetV2, DarkNet19, and ResNet18. These features are then classified using machine learning classifiers with various kernel functions, which apply a strong 10-fold cross-validation technique to assure model reliability. Using a medium Gaussian kernel of the SVM classifier, the proposed system achieved a classification accuracy of 98.61%, specificity of 98.85%, and sensitivity of 97.25%. The framework is computationally efficient and scalable, allowing for greater dataset testing. The proposed technique provides a dependable and efficient solution for accurate identification of rice leaf diseases, reducing farmers' reliance on manual inspection and supporting timely intervention.
Why it matches plant phenotyping methodsイネ葉画像から病害状態を自動推定する深層学習・機械学習手法が研究の中心であり、交差検証による性能評価も行っているため、植物フェノタイピング手法として含める。
abstractThis paper presents a novel hybrid deep-learning and machine-learning framework for automatically identifying rice plant diseases from leaf photos.
Reproduction assets foundThe paper's Data Availability statement lists three public leaf-image datasets used as phenotyping inputs: a Kaggle rice leaf diseases dataset, the UCI Machine Learning Repository rice leaf dataset, and the IEEE Dataport Indian Rice Disease Dataset (IRDD). No author analysis code, models, or checkpoints are shared.Dataset · publicnt, scalable, and user-friendly agricultural disease management solutions.
Data Availability
The leaf images utilized in our research were gathered from various reputable sources, including the UCI and Kaggle datasets, along with specific images obtained from the IEEE dataset repository. The links to the dataset are: 1. kaggle. https://www.kaggle.com/datasets/vbookshelf/rice-leaf-diseases . 2. UCI Machine Learning Repository. https://doi.org/10.24432/C5R013 . 3. IEEE Dataport. https://ieee-dataport.org/documents/indian-rice-disease-dataset-irdd (doi: 10.21227/4rmf-gd63 ).
Funding Statement
The author(s) received no specific funding for this work.
References
1. Gulati A, Kapur D, Bouton MM. ROpen asset ↗Kaggle · vbookshelf/rice-leaf-diseaseslines:292-309Dataset · publicf images utilized in our research were gathered from various reputable sources, including the UCI and Kaggle datasets, along with specific images obtained from the IEEE dataset repository. The links to the dataset are: 1. kaggle. https://www.kaggle.com/datasets/vbookshelf/rice-leaf-diseases . 2. UCI Machine Learning Repository. https://doi.org/10.24432/C5R013 . 3. IEEE Dataport. https://ieee-dataport.org/documents/indian-rice-disease-dataset-irdd (doi: 10.21227/4rmf-gd63 ).
Funding Statement
The author(s) received no specific funding for this work.
References
1. Gulati A, Kapur D, Bouton MM. Reforming Indian agriculture. Economic & Political Weekly. 2020;55(11):35–42.
2. Haggblade SOpen asset ↗UCI Machine Learning Repository · 10.24432/C5R013lines:292-309Dataset · publicvarious reputable sources, including the UCI and Kaggle datasets, along with specific images obtained from the IEEE dataset repository. The links to the dataset are: 1. kaggle. https://www.kaggle.com/datasets/vbookshelf/rice-leaf-diseases . 2. UCI Machine Learning Repository. https://doi.org/10.24432/C5R013 . 3. IEEE Dataport. https://ieee-dataport.org/documents/indian-rice-disease-dataset-irdd (doi: 10.21227/4rmf-gd63 ).
Funding Statement
The author(s) received no specific funding for this work.
References
1. Gulati A, Kapur D, Bouton MM. Reforming Indian agriculture. Economic & Political Weekly. 2020;55(11):35–42.
2. Haggblade S, Hazell P, Reardon T. The rural non-farm economy: prospects fOpen asset ↗IEEE Dataport · 10.21227/4rmf-gd63lines:292-309Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Money plants are widely recognized for their significant spiritual and air-purifying benefits. Research has proven that daily interaction with these vibrant indoor plants effectively reduces anxiety and stress. This paper introduces a robust dataset of 4302 healthy, unhealthy, combined, real and college premises images of money plants captured using smartphones. The dataset was collected from the educational hub, Dr. D. Y. Patil Institute of Technology, Pune campus, Maharashtra, India. Under controlled conditions, images were taken from a mobile device to ensure consistency and quality. From different angles and different backgrounds, images are captured. The aim of creating the dataset was to support researchers in achieving their objectives in the agricultural field and to explore our dataset so that it may be used for further research, investigation, and training of artificial intelligence models using our dataset.
Why it matches plant phenotyping methods植物の健康・不健康状態を画像で収集・分類したデータセットが論文の中心であり、病害・状態フェノタイピング用データセットとして適格です。
abstractThis paper introduces a robust dataset of 4302 healthy, unhealthy, combined, real and college premises images of money plants captured using smartphones.
Reproduction assets foundThis Data in Brief article describes its own public plant-phenotyping asset: a 4302-image money plant (Epipremnum aureum) leaf dataset with manual healthy/unhealthy classification, deposited on Mendeley Data (V4, DOI 10.17632/kd8hs7ch6t.4) with a Zenodo mirror and an authors' GitHub repository. The dataset is the paperDataset · publicRepository name : Epipremnum aureum (Money Plant Leaf) datasets
Data identification number : Version: V4, 10.17632/kd8hs7ch6t.4
Direct URL to data: https://data.mendeley.com/datasets/kd8hs7ch6t/4Open asset ↗10.17632/kd8hs7ch6t.4lines:1-73Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Field / plotRGB / grayscaleWhole plant / canopy / plot / fieldObject detectionGrowth / time-series analysisGrowth / development / phenology
1. Ecosystems are rapidly degrading. Widely used approaches to monitor ecosystems to manage them effectively are both expensive and time consuming. The recent proliferation of publicly available imagery from satellites, Google Earth, and citizen-science platforms holds the promise to revolutionising ecological monitoring and optimising their efficiency. However, the potential of these platforms to detect species and track their population dynamics remains under-explored. 2. We introduce a fast, inexpensive method for retrospective image analysis combining current ground-truth data with historical RGB imagery from Google Earth to extract long-term demographic data. We apply this method to three case studies involving two major Mediterranean invasive plant taxa with contrasting growth forms. Specifically, we: (1) utilise deep learning to automatically detect individuals of prickly pear ( Opuntia sp.) across various Mediterranean habitats and image resolutions; (2) reconstruct 10 years of spatially explicit recruitment rates for Opuntia along a climatic gradient; and (3) quantify nearly 20 years of growth dynamics for the clonal invader Carpobrotus sp. in two contrasting environments. 3. Our object detection model, trained with Google Earth imagery, achieves 60-80% success in identifying individuals of Opuntia , regardless of habitat type. Model performance increases with target species colour consistency and contrast, as well with the usage of basic data augmentation techniques. Detection is constrained by individual area (<4 m 2 ) but captures 80% of the examined population. 4. Beyond detection, our time-series analysis of publicly available imagery enables detailed population monitoring. With 10-year image series available for Spain, Greece, and the UK, and 20 years for Portugal, we successfully estimate annual recruitment and growth rates and their climatic sensitivity, identify productive and unproductive years, estimate individual age, characterise population structure, model size-age relationships, and identify recruitment hotspots for targeted management. 5. Our pipeline opens new avenues for cost-effective, large-scale demographic monitoring by retrospectively harnessing open-access imagery. While demonstrated here with invasive plants, we discuss the broad applicability of our approach across taxa and ecosystems. The use of retrospective image analysis for long-term demography with Google Earth imagery has the potential to expedite conservation decisions, support effective restoration, and enable robust ecological forecasting in the Anthropocene.
Why it matches plant phenotyping methodsGoogle Earth画像と深層学習を用いて植物個体の検出、成長・加入率・年齢などの形態・動態形質を抽出する再利用可能な解析パイプラインを開発・評価しており、植物フェノタイピング手法が中心である。
abstractWe introduce a fast, inexpensive method for retrospective image analysis combining current ground-truth data with historical RGB imagery from Google Earth to extract long-term demographic data.
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits all data and code (Google Earth imagery-based demographic data, segmentation/training data, and analysis code) on FigShare with a DOI, and provides author video-tutorials of the phenotyping/demography pipeline on a YouTube playlist. Both are paper-specific,公开,Dataset · public9
Google Earth
10
11
Author Contributions: EF: Conceptualisation, field data collection, data analysis, first draft
12
writing. GC: First approach on part of the analysis. RS-G: Supervision, support in
13
conceptualisation, writing-feedback.
14
15
Data Availability Statement: All data and code can be found in FigShare: DOI:
16
https://doi.org/10.6084/m9.figshare.30024679.v1. Video-tutorials can also be found in this
17
YouTube playlist: https://www.youtube.com/playlist?list=PL_LKE-18
yTi9kBXfw_qDdJCQ3Sxu2fjGvDD, of EF’s account: @environmentaldatascientist.
19
20
Acknowledgments: We thank C. Ribalta-Pizarro for her assistance geolocalising individuals
21
on the field and collecting UAV data.Open asset ↗FigShare · 10.6084/m9.figshare.30024679.v1pdf-raw-page:1 lines:1-62Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
This research presents a fully automated two-step method for segmenting rice seedlings and assessing their health by integrating spectral, morphological, and textural features. Driven by the global need for increased food production, the proposed method enhances monitoring and control in agricultural processes. Seedling locations are first identified by the excess green minus excess red index, which enables automated point-prompt inputs for the segment anything model to achieve precise segmentation and masking. Morphological features are extracted from the generated masks, while spectral and textural features are derived from corresponding red-green-blue imagery. Health assessment is conducted through anomaly detection using a one-class support vector machine, which identifies seedlings exhibiting abnormal morphology or spectral signatures suggesting stress. The proposed method is validated by visual inspection and Silhouette score, confirming effective separation of anomalies. For segmentation, the proposed method achieved mean dice scores ranging from 72.6 to 94.7. For plant health assessment, silhouette scores ranged from 0.31 to 0.44 across both datasets and various growth stages. Applied across three consecutive rice growth stages, the framework facilitates temporal monitoring of seedling health. The findings highlight the potential of advanced segmentation and anomaly detection techniques to support timely interventions, such as pruning or replacing unhealthy seedlings, to optimize crop yield.
Why it matches plant phenotyping methodsイネ幼苗の画像セグメンテーションと形態・スペクトル・テクスチャ特徴に基づく健康状態推定を中心とする手法開発・検証研究であり、植物表現型の取得と異常判定が中核です。
abstractThis research presents a fully automated two-step method for segmenting rice seedlings and assessing their health by integrating spectral, morphological, and textural features.
Reproduction assets foundThe paper uses two publicly available rice seedling image datasets as its phenotyping inputs: the Taiwan UAV Rice Seedling Dataset (GitHub) and the Heilongjiang seedling image dataset (Science Data Bank). No author analysis code, models, or checkpoints are reported as publicly available.Dataset · publicThe first dataset used in this study was obtained from Rice Seedling Dataset repository, originally published in “A UAV Open Dataset of Rice Paddies for Deep Learning Practice” by Yang et al., 2021 [ 7 ]. The dataset is publicly available in a GitHub repository and can be accessed at the following link: https://github.com/aipal-nchu/RiceSeedlingDatasetOpen asset ↗aipal-nchu/RiceSeedlingDatasetlines:130-332Dataset · publicThe second dataset was obtained from repository of “Image Dataset of Wheat, Corn, and Rice Seedlings in Heilongjiang Province”, originally published in 2022 by Qin Jia Le and Guo Leifeng [ 46 ]. The dataset is publicly available in the Science Data Bank repository and can be accessed at the following link: https://www.scidb.cn/en/detail?dataSetId=a511f28b23444235b5378953c76c47c6#p4Open asset ↗lines:130-332Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Color accuracy and consistency in remote sensing imagery are crucial for reliable plant health monitoring, precise growth stage identification, and stress detection. However, without effective color correction, variations in lighting and sensor sensitivity often cause color distortions between images, compromising data quality and analysis. This study introduces a novel in-flight color correction approach for RGB imagery using cooperative dual unmanned aerial vehicle (UAV) flights integrated with a color chart (CoF-CC). The method employs a master UAV equipped with an RGB camera for image acquisition and a synchronized secondary UAV carrying a ColorChecker (X-Rite) chart, ensuring persistent visibility of the chart within the imaging field of the master UAV for the calculation of a color correction matrix (CCM) for in-flight image correction. Field experiments validated the method by analyzing cross-sensor color consistency, assessing color measurement accuracy on field-grown rice leaves, and demonstrating its practical applications using rice maturity estimation as an example. The results indicated that the CCM significantly enhanced color accuracy, with a 66.1 % reduction in the average CIE 2000 color difference (ΔE), and improved color consistency among the six RGB sensors, with a 70.2 % increase in the intracluster distance. CoF-CC subsequently reduced ΔE from 18.2 to 5.0 between the corrected rice leaf color and ground-truth measurements, indicating that the color differences were nearly perceptible to the human eye. Moreover, the corrected imagery significantly enhanced the rice maturity prediction accuracy, improving the R 2 from 0.28 to 0.67. In summary, the CoF-CC method standardizes RGB images across diverse lighting conditions and sensors, demonstrating robust performance in color analysis and interpretation under open-field conditions.
Why it matches plant phenotyping methods植物葉の色および成熟度を推定するためのUAV画像色補正法を開発し、圃場で精度検証と成熟度推定への適用を行っており、フェノタイピング手法が中心である。
abstractThis study introduces a novel in-flight color correction approach for RGB imagery using cooperative dual unmanned aerial vehicle (UAV) flights integrated with a color chart (CoF-CC).
Reproduction assets foundThe paper's UAV image datasets are explicitly deposited on GitHub (RiceUAVImageData); labelme is a generic third-party tool, not a paper-specific asset.Dataset · publicThe UAV image datasets used in this study are openly available in the GitHub repository at https://github.com/GaryLXQ/RiceUAVImageData .Open asset ↗GaryLXQ/RiceUAVImageData · GaryLXQ/RiceUAVImageDatalines:179-198Code / dataset availability confirmedOpenAlex · Europe PMC · checked 6 Sept 2026
) disease that threatens global food security, requires precise quantification of diseased spikelet rate (DSR) as a phenotypic indicator for resistance breeding. Most techniques for measuring DSR rely on manual spikelet-by-spikelet observation and counting, which is inefficient and destructive. Although deep learning offers great promise for automated DSR measurement, existing intelligent detection algorithms are hampered by the lack of spikelet-level annotated data, insufficient feature representation for diseased spikelets, and weak spatial encoding of densely arranged spikelets. To address these challenges, we constructed a dataset of 620 high-resolution RGB images of wheat spikes with 5,222 spikelet-level annotations to systematically analyze spikelet size distributions to fill small-object detection data gaps in this field. We designed FHBDSR-Net, a light framework for automated DSR measurement centered on diseased spikelet detection, which features (1) multi-scale feature enhancement architecture that dynamically combines lesion textures, morphological features, and lesion-awn contrast through adaptive multi-scale kernels to suppress background noise; (2) the Inner-EfficiCIoU loss function to reduce small-target localization errors in dense contexts; and (3) a scale-aware attention module using dilated convolutions and self-attention to encode multi-scale pathological patterns and spatial distributions to enhance dense spikelet resolution. FHBDSR-Net detected diseased spikelets with an average precision of 93.8% with a lightweight design of 7.2 M parameters. The results were strongly correlated with expert evaluations, with a Pearson correlation coefficient of 0.901. Our method is suitable for deployment on resource-constrained mobile devices, facilitating portable plant phenotyping and smart breeding.
Why it matches plant phenotyping methodsコムギ穂の罹病小穂率という植物病害形質を画像から自動推定する手法を開発し、データセット構築と専門家評価による検証を行っており、フェノタイピング手法が中心である。
abstractrequires precise quantification of diseased spikelet rate (DSR) as a phenotypic indicator for resistance breeding.
Reproduction assets foundThe paper's Data availability statement explicitly deposits both the spikelet-level annotated wheat spike image dataset (620 RGB images, 5,222 annotations) and the FHBDSR-Net analysis code in a public GitHub repository under the authors' account, matching an allowed URL.Dataset · publicThe dataset and code generated in this study are available at https://github.com/WeizhenLiuBioinform/Wheat-FHB-DSR-Measurement .Open asset ↗WeizhenLiuBioinform/Wheat-FHB-DSR-Measurementlines:901-961Code / dataset availability confirmedCrossref · OpenAlex · Europe PMC · checked 6 Sept 2026
Understanding the genetic basis of quantitative traits related to crop growth, yield, and stress response requires the acquisition of large-scale, high-quality phenotypic datasets. High-throughput phenotyping platforms have become effective tools for meeting this requirement. Autonomous mobile robots have gained prominence owing to their ability to carry heavy payloads, their operational flexibility, and their proximity to crops, which allows for higher imaging resolution. In this study, we introduce PhenoRob-F (a phenotyping robot for the field), a cross-row, wheeled robot designed for efficient and automated phenotyping under field conditions. The mobile platform and phenotyping module of the robot were engineered to meet the specific demands of field phenotyping, with integrated visual and satellite navigation systems enabling autonomous operation. We validated the performance of the robot through a series of experiments involving various crop canopies. By capturing RGB images of rice and wheat, we independently performed wheat ear detection and rice panicle segmentation. For wheat ear detection, we achieve a precision of 0.783, a recall of 0.822, and a mean average precision (mAP) of 0.853 when the YOLOv8m model is used. For rice panicle segmentation, the SegFormer_B0 model yielded a mean intersection over union (mIoU) of 0.949 and an accuracy of 0.987. Additionally, by capturing RGB-D data of maize canopies, we performed 3D reconstructions to calculate plant height, achieving an R 2 of 0.99 compared with manual measurements. Similar experiments with rapeseed yielded an R 2 of 0.97. Near-infrared spectral data collected from drought-stressed rice plants enabled the classification of drought severity into five categories, with classification accuracies ranging from 0.977 to 0.996. Our results reveal that PhenoRob-F is an effective tool for high-throughput phenotyping and is capable of providing precise data to support phenotypic trait analysis and the selection of superior crop genotypes.
Why it matches plant phenotyping methods圃場用自律ロボットと複数の画像・分光センシング、形質抽出手法を開発し、作物キャノピーで性能検証しているため、植物フェノタイピング手法が研究の中心である。
abstractwe introduce PhenoRob-F (a phenotyping robot for the field), a cross-row, wheeled robot designed for efficient and automated phenotyping under field conditions.
Reproduction assets foundThe paper's data availability statement explicitly links a public GitHub repository containing part of the data and code supporting this PhenoRob-F phenotyping study; remaining data are available on request.Code · publicPart of the data and code supporting this study are openly available with the following link: https://github.com/balloonhaha/PhenoRob-F. All other reasonable requests for data and research materials will be fulfilled upon contacting the corresponding authors.Open asset ↗balloonhaha/PhenoRob-Fhtml-lines:193-220Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Chlorophyll breakdown is a central process during plant senescence or stress responses, and leaf chlorophyll content is therefore a strong predictor of plant health. Chlorophyll quantification can be done in several ways, most of which are time-consuming or require specialized equipment. A simple alternative to these methods is the use of image-based chlorophyll estimation, which uses the color values in RGB images to calculate colorimetric visual indexes as a measure of the leaf chlorophyll content. Image-based chlorophyll measurement is non-destructive and requires no specialized equipment, apart from a digital camera. Here, we developed the ImageJ plugin Green Leaf Visual Index that facilitates high-throughput image analysis for quantifying leaf chlorophyll content. Our plugin offers the option to white-balance images to decrease variation between images and has an optional background removal step. We show that this method can reliably quantify leaf chlorophyll content in a variety of plant species. In addition, we show that image-based chlorophyll quantification can replicate Genome-Wide Association Study results based on traditional chlorophyll extraction methods, showing that this method is highly accurate.
Why it matches plant phenotyping methods葉のクロロフィル含量を画像から推定するFIJIプラグインを開発し、複数植物種で信頼性と従来法との一致を検証しており、植物表現型取得法が中心である。
abstractHere, we developed the ImageJ plugin Green Leaf Visual Index that facilitates high-throughput image analysis for quantifying leaf chlorophyll content.
Reproduction assets foundThe paper's authors publicly released the GreenLeafVI FIJI plugin source code and documentation on GitHub, which is the computational tool used for the paper's image-based chlorophyll phenotyping. The underlying phenotype/trait datasets (RGB image measurements and chlorophyll extraction values) are not publicly posted;Code · publicThe data that support the findings of this study are available from the corresponding author upon reasonable request. The GreenLeafVI source code, documentation, and further information are available at https://github.com/jelmervanlieshout/GreenLeafVI .Open asset ↗jelmervanlieshout/GreenLeafVIlines:202-249Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Abstract Image‐based plant phenotyping has diverse applications, ranging from providing quantitative traits for genetic breeding to enhancing management practices for indoor and outdoor production systems. Misidentification of cell lines or ecotypes/varieties is a major problem across all biological research disciplines. With the 1000 Arabidopsis Genome Project facilitating the use of various ecotypes, it is crucial to verify the identity of ecotypes in discovery‐based genetic screens involving hundreds of ecotypes. To address this issue, an RGB image analysis pipeline was established for the accurate recognition of different Arabidopsis thaliana ecotypes. In the developed pipeline, the most crucial aspects for accurately capturing traits and training deep learning models were identified as follows: (i) assessment of data complexity using spatial‐temporal features of the RGB spectrum and data entropy, the latter defined as the variability within the dataset; (ii) data redefinition in instances of high data complexity; and (iii) data partitioning based on extracted morphological similarity among ecotype replicates. The pipeline includes several supervised deep learning models integrated into an auto‐optimization subsystem. Extensive hyperparameter tuning was performed to identify the best‐performing models for single‐image and image‐sequence ecotype classification. Two external datasets were evaluated to demonstrate the robustness of the pipeline, regardless of how they were collected. A graphical user interface is provided to prepare these images for input into the pipeline in cases of extreme variability. The pipeline can automatically verify ecotypes in large‐scale studies and extract traits for further analysis and correlation, as needed, using datasets from a variety of sources.
Why it matches plant phenotyping methodsRGB画像から植物形態情報を抽出し、深層学習による分類・検証を行うパイプライン自体が中心的な貢献であり、外部データセットで頑健性も評価しているため。
abstractan RGB image analysis pipeline was established for the accurate recognition of different Arabidopsis thaliana ecotypes.
Reproduction assets foundThe paper's Data Availability Statement explicitly provides a public GitHub repository containing the source code of the RGB image analysis pipeline used for Arabidopsis ecotype classification, directly reproducing this paper's computational analysis. Supporting Information also contains the extracted rosette area and Code · publican be found in Sup-
porting Information Data S1 and S2. Installation file along
with user manual for developed GUI for color enhancement
and background suppression can be found in GUI Package
in the Supporting Information. The source code of the RGB
image analysis pipeline components is available at the fol-
lowing GitHub link: https://github.com/pisyntor/Computer_
based_Recognition_of_Arabidopsis_thaliana_Ecotypes.
O RC I D
RijadSarić https://orcid.org/0000-0002-7554-2555
James Whelan https://orcid.org/0000-0001-5754-025X
R E F E R E N C E S
1001 Genomes Consortium. (2016). 1,135 Genomes reveal the global
pattern of polymorphism in Arabidopsis thaliana. Cell, 166(2), 481–
491. https://doOpen asset ↗pisyntor/Computer_pdf-raw-page:22 lines:1-89Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
The Transition to a Data-Driven Agriculture (TTADDA) project focuses on advancing the shift toward high-tech, circular agriculture. By developing cutting-edge sensor technologies and AI-driven tools, the project aims to boost productivity through a data-centric potato production system that supports circular agricultural practices. Potato phenotyping is crucial for creating high-yielding, resilient, and sustainable potato crops, which are essential in global food systems. Specifically in the Netherlands, the global leader in seed potato production and Japan that produces certified seed potatoes under strict quality controls and phytosanitary regulations. A multi-season drone dataset from five potato trials-three in Japan and two in the Netherlands was collected. Each trial field was divided into small plots, each planted with a specific cultivar to assess varietal performance. Data included drone imagery (RGB and multispectral), manual yield and ground coverage measurements, and weather data. The combination of sensor versatility, diverse potato varieties, and varying climate and soil conditions between Japan and the Netherlands makes this dataset highly valuable and potentially reusable for a wide range of applications. Using MIAPPE for this dataset ensures consistent, clear documentation of sensors, varieties, and conditions, making the data findable, reusable, and easy to integrate with other studies. It also supports reproducibility and automated analysis across the multi-location trials.
Why it matches plant phenotyping methodsジャガイモの表現型解析を目的としたUAV RGB・マルチスペクトル画像と圃場測定を含む、多季節・多地点の再利用可能なデータセットの構築・標準化が中心である。
abstractA multi-season drone dataset from five potato trials-three in Japan and two in the Netherlands was collected.
Reproduction assets foundThe paper is a data descriptor for the TTADDA-UAV potato phenotyping dataset (RGB/multispectral orthomosaics, DSMs, yield, ground coverage, weather) publicly deposited on 4TU.ResearchData with a DOI, plus an authors' GitHub repository for loading the MIAPPE-formatted data.Dataset · publicThe dataset is part of the following collection:
Data identification number: doi.org.10.4121/936b5772–09fc–4856–983d-1f9cc2f38d15
Direct URL to data: ( https://doi.org/10.4121/936b5772-09fc-4856-983d-1f9cc2f38d15 )
The collection consist of metadata, and five related studies: TTADDA_NARO_2021, TTADDA_NARO_2022, TTADDA_NARO_2023, TTADDA_WUR_2022, TTADDA_WUR_2023
To visualise the metadata and download the dataset we recommend the following GIT:
https://github.com/NPEC-NL/MIAPPE_TTADDA_dataset
Related research article
None
1
Value of the DOpen asset ↗10.4121/936b5772-09fc-4856-983d-1f9cc2f38d15lines:57-83Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Abstract The development of high‐throughput phenotyping platforms to capture time‐series data on large, diverse populations holds promise for crop researchers and breeders investigating growth‐related traits. We used imagery from unoccupied aerial vehicles (UAVs) with red/green/blue (RGB) and multispectral cameras flown over multiple site‐years in Saskatchewan, Canada, and Metaponto, Italy, to gather data for crop height, area, and volume in a lentil diversity panel (324 genotypes). The temporal nature of the UAV image‐derived data enabled the modeling of growth curves for volume, height, and area, something that would be impractical under traditional phenotyping procedures in such a large population grown in multiple environments. A principal component analysis and hierarchical clustering revealed differential growth patterns across contrasting environments, with large variations in temperature and photoperiod, within our lentil diversity panel. Combining this analysis with genome‐wide genotyping data, we identified markers, from an exome capture array (267,845 single nucleotide polymorphisms), associated with crop growth that could be used for marker‐assisted selection. Our study demonstrates the potential for UAV‐based imaging to obtain large‐scale time‐series data across multiple environments to model growth curves and investigate genotype‐by‐environment interactions. In addition, we can now use phenotypic traits that were once impractical to collect and derive novel phenotypes to improve our understanding of crop growth and the genetics underlying adaptation in lentil, approaches that will be useful for both researchers and breeders.
Why it matches plant phenotyping methodsUAV画像からレンティルの高さ・面積・体積を時系列推定し、大規模集団で成長曲線をモデル化するフェノタイピング手法の実質的な適用・評価が中心である。
abstractThe development of high‐throughput phenotyping platforms to capture time‐series data on large, diverse populations holds promise for crop researchers and breeders investigating growth‐related traits.
Reproduction assets foundThe paper's UAV-derived lentil growth phenotypes are publicly available on KnowPulse, and the authors' full analysis code/workflow is public on GitHub with a rendered vignette. Both are explicitly stated in the data availability statement and methods.Dataset · publiciluppo e di Innovazione
in Agricoltura) in Metaponto, Italy. Special thanks to Laura
Jardine for help with editing.
C O N F L I C T O F I N T E R E S T S TAT E M E N T
The authors declare no conflicts of interest.
DATA AVA I L A B I L I T Y S TAT E M E N T
The data that support the findings of this study are
available online at https://knowpulse.usask.ca/research-experiment/AGILE-UAV and https://github.com/derekmichaelwright/AGILE_LDP_UAV or from the authors
upon request.
O RC I D
DerekM. Wright https://orcid.org/0000-0002-9639-7596
SandeshNeupane https://orcid.org/0000-0003-3679-1046
Tania Gioia https://orcid.org/0000-0001-8980-3034
Giuseppina Logozzo https://orcid.org/0000-0002-7951-2425
SOpen asset ↗knowpulse.usask.ca · AGILE-UAVpdf-raw-page:11 lines:1-84Code · publical user-
calculated traits as described in Figure 2. G × E analysis was
done with “lme4” using linear mixed models (Bates et al.,
2015). Principal component analysis (PCA) and hierarchical
k-means clustering were performed using the “FactoMineR”
R package (Lê et al., 2008). The source code for all data
analyses is available at: https://derekmichaelwright.github.io/AGILE_LDP_UAV/LDP_UAV_Vignette.html.25782703,
2025,
1,
Downloaded
from
https://acsess.onlinelibrary.wiley.com/doi/10.1002/ppj2.70040,
Wiley
Online
Library
on
[20/08/2025].
See
the
Terms
and
Conditions
(https://onlinelibrary.wiley.com/terms-and-conditions)
on
WileyOpen asset ↗derekmichaelwright.github.io/AGILE_LDP_UAV · LDP_UAV_Vignettepdf-raw-page:3 lines:1-106Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Laboratory / benchtopRGB / grayscaleFruitClassificationGrowth / development / phenology
Okra is a highly nutritious farming product that combats malnutrition issues while supporting sustainable agricultural methods. In order to keep its quality and versatility in preparation applications, it is important to classify its maturity stages into under-mature, mature, and over-mature categories. Classification is vital to identify the best time to harvest, satisfy market demands, minimize post-harvest losses, and optimize cooking uses. This data in brief uses a non-destructive approach to okra maturity classification based on a dataset of images taken under controlled illumination using a standard RGB camera. The dataset contains okra samples that were sourced from various farms and vegetable markets, ensuring that it encapsulates the natural variability found in real-world farm and market environments. The availability of such a large dataset enables the creation of precise classification models that can assist farmers in optimizing the time of harvest, fulfilling consumers' requirements, and improving market results. The research has great relevance to promoting agricultural quality evaluation and boosting market readiness using non-invasive techniques.
Why it matches plant phenotyping methodsRGB画像データセットによるオクラ果実の成熟段階分類が研究の中心であり、植物器官の状態を画像から推定する再利用可能なフェノタイピング資源に該当する。
titleRGB image dataset for okra maturity classification to enhance agricultural quality and market readiness.
Reproduction assets foundThe paper is a Data in Brief article whose core contribution is a public RGB okra image dataset (364 images across three maturity classes) deposited on Mendeley Data, directly serving as the paper's phenotyping image asset. No separate analysis code repository is described.Dataset · publicVellore Institute of Technology - Chennai Campus.
City/Country: Chennai, India.
Latitude and longitude for collected samples/data: (12.8406° N, 80.1534° E), Vellore Institute of Technology - Chennai.
Data accessibility
Repository name: Okra Image Dataset
Data identification number: DOI: 10.17632/jmhz4826f2.1
Direct URL to data: https://data.mendeley.com/datasets/jmhz4826f2/1
Related research article
[ 1 ]
1
Value of the Data
•
Agricultural quality assessment is advancing through non-invasive methods that include the use of RGB image analysis for effective determination of okra maturity stages.
•
Utilization of ML and DL methods in recognizing visual characteristics, i.e., color, texture, andOpen asset ↗10.17632/jmhz4826f2.1lines:1-56Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Results: proved that synchronized use of inexpensive RGB images, image processing, and machine learning (ML) can accurately identify crop stress. Four Machine Learning Image Modules (MLIMs) were developed to enable rapid and cost-effective identification of sugar beet stresses caused by water and/or nitrogen deficiencies. RGB images representing stressed and non-stressed crops were used in the analysis. Each MLIM was trained and tested using 54 combinations derived from nine canopy and RGB-based input features and six ML algorithms. The most accurate MLIM used RGB bands as input to a Multi-Layer Perceptron, achieving 100% accuracy for overall stress detection, and 95.6% and 86.7% for water and nitrogen stress identification, respectively. A Stochastic Gradient Descent model, using only the green band, achieved 97.78% accuracy for stress detection while requiring only one-fourth the computation time. For specific stresses, a Random Forest (RF) model using RGB bands and canopy cover achieved 86.7% for water stress, while RF with the excess green index reached 75.6% for nitrogen stress. To address the trade-off between accuracy and computational cost, a bargaining theory-based framework was applied. This approach identified optimal MLIMs that balance performance and execution efficiency.
Why it matches plant phenotyping methodsRGB画像・画像処理・機械学習を用いてテンサイの水・窒素ストレスを識別する画像ベースの表現型推定手法を開発・比較しており、ストレス状態の取得・抽出が研究の中心です。
abstractsynchronized use of inexpensive RGB images, image processing, and machine learning (ML) can accurately identify crop stress
Reproduction assets foundThe paper's Data Availability Statement explicitly states the supporting data (the sugar beet RGB image dataset and derived inputs used for stress-detection ML) are openly available in a HydroShare repository, matching an allowed URL. No code or model deposit is stated.Dataset · publicualization, SRH, MH, RCP.; supervision, SR MH, RCP,
MS.; project administration, SRH, MH, RCP, MS. All authors have read and agreed to the published version of
the manuscript.
Funding: This research received no external funding
Data Availability Statement: The data that support the findings of this study are openly available in
http://www.hydroshare.org/resource/02b0a248417c4dd6b1b2d7a3c24bc5b6
Acknowledgments: We acknowledge the Writing Centre at Utah State University, USA, for assisting us in
improving the English in this paper, Imam Khomeini International University, Iran, for providing the supporting
resources, and Tehran Municipality, Iran, for their collaboration and support during thiOpen asset ↗hydroshare.org · 02b0a248417c4dd6b1b2d7a3c24bc5b6pdf-raw-page:15 lines:1-61Code / dataset availability confirmedEurope PMC · Crossref · checked 15 Sept 2026
Background and aims Rapid, large-scale monitoring is critical to understanding spatiotemporal plant stress dynamics, but current physiological stress markers are costly, destructive and time-consuming. This study aimed to evaluate the potential of machine learning to non-destructively predict leaf betalains - yellow to reddish pigments unique to Caryophyllales species - for the first time, and to explore intra-individual variation in betalains in a clonal species and its role in responding to stressful periods. Methods We characterized the betalainic profile of an invasive clonal plant for the first time, Carpobrotus edulis (the cape fig), via high-performance liquid chromatography. We measured multiple stress markers over a year, including betalain content using our optimized method, where the species is spreading. Additionally, 3735 digital images at the leaf level were taken. Machine learning regression algorithms were trained to predict betalain accumulation from digital images, outperforming classic spectroradiometer measurements. Key results Betalain content increased sharply in non-reproductive ramets during extreme abiotic conditions in summer and during senescence in reproductive ramets. The stress markers revealed a strong intra-individual functional mosaic, underscoring the importance of spatiotemporal dimensions in stress tolerance. Conclusions We developed a scalable, non-destructive tool for betalain research that integrates digital imaging with machine learning. This approach opens new possibilities for understanding spatiotemporal stress responses, particularly in clonal plant systems, using artificial intelligence.
Why it matches plant phenotyping methods葉のデジタル画像と機械学習によりベタレイン蓄積を非破壊推定する手法を開発しており、植物ストレス状態の表現型取得が研究の中心である。
abstractThis study aimed to evaluate the potential of machine learning to non-destructively predict leaf betalains
Reproduction assets foundThe paper's Data Availability statement explicitly deposits the complete set of analysis scripts, collected leaf images, image features (predictors), and response variables (betalain/pigment measurements) in FigShare under DOI 10.6084/m9.figshare.28706588. This is a paper-specific, public phenotyping asset (images + MLDataset · publicThe complete set of scripts, collected images, image features
(predictors) and response variables are publicly available in
FigShare: 10.6084/m9.figshare.28706588.FigShare · 10.6084/m9.figshare.28706588pdf-raw-page:12 lines:1-81Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 6 Sept 2026
In recent years, accurate and low-cost variant calling has enabled the genotyping of large diversity panels for genome-wide association studies. As a result, phenotyping rather than genotyping is now the rate-limiting step, especially in field experiments. This has created a strong need for high-throughput, accurate, and low-cost in-field phenotyping. Here, we present a genome-wide association study (GWAS) study on 194 field-grown accessions of lettuce (Lactuca sativa). These accessions were non-destructively phenotyped at two time points 15 days apart using a drone equipped with an RGB and multispectral (MSP) camera. Our high-throughput phenotyping approach integrates an RGB- and MSP camera to measure the color and height of lettuce in this large-scale field experiment. We used the mean and other summary statistics, such as median, quantiles, skewness, kurtosis, minimum, and maximum to quantify different aspects of color and height variation in lettuce from the drone images. Using these summary statistics as traits for GWAS, we confirm several previously described genetic associations, now under field conditions, and identify additional novel associations for color and height traits in lettuce.
Why it matches plant phenotyping methodsドローン搭載RGB・マルチスペクトルカメラを用いて、レタスの色と高さを大規模・非破壊・定量測定する高スループット表現型解析手法が研究の中心であり、GWASへの応用も行っている。
abstractHere, we present a genome-wide association study (GWAS) study on 194 field-grown accessions of lettuce (Lactuca sativa). These accessions were non-destructively phenotyped at two time points 15 days apart using a drone equipped with an RGB and multispectral (MSP) camera.
Reproduction assets foundThe paper's authors publicly deposited their image processing, GWAS, and figure scripts on GitHub (SnoekLab/Dijkhuizen_etal_2025_Drone) and all raw/intermediate phenotyping data (including weather data) at a UU Yoda DOI (10.24416/UU01-S5FCM9). Both are paper-specific, public, and actionable.Code · publicThe scripts for making the SNP map from the filtered VCF file and for the image processing, GWAS, and figures in this manuscript are available on https://github.com/SnoekLab/Dijkhuizen_etal_2025_Drone .Open asset ↗SnoekLab/Dijkhuizen_etal_2025_Dronelines:362-531Dataset · publicData available at https://doi.org/10.24416/UU01‐S5FCM9 . This includes all raw data, all intermittent steps, the data required to generate all figures, and data on the weather during the experiment.Open asset ↗10.24416/UU01‐S5FCM9lines:362-531Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
Abstract Soybean growth is determined by the interaction of genetic, environmental, and management factors. In the context of future climate and climate extremes, understanding genotype by environment interaction (GxE) will be crucial for selecting resilient breeding lines and optimizing management practices to minimize stress. As stress periods occur periodically in a season, in depth knowledge, about causing weather variables and differing responses of genotypes over time is required. In field studies, however, the environment is often treated as a static factor, and the specific effects of weather variability on growth remain poorly understood. Here, we present a longitudinal dataset comprising 17,247 high-resolution RGB images of soybean breeding line collected over eight years in Eschikon, Switzerland. Top of canopy images were acquired throughout the entire growing seasons and complemented by hourly weather data, enabling a comprehensive analysis of soybean growth dynamics under varying field conditions. High spatio-temporal image resolution enables detailed analysis of growth dynamics and GxE, supporting identification of stress-tolerant genotypes to improve yield prediction and yield stability.
Why it matches plant phenotyping methods8年間の高解像度RGB画像による圃場フェノタイピングデータセットを提示し、作物生育動態とG×E解析を可能にする方法・データ基盤が中心である。
titleFIP 1.0 Soybean data: Insights on soybean growth from eight years of high-throughput image field phenotyping
Reproduction assets foundThe paper is a data note whose core contribution is a public soybean phenotyping dataset (raw FIP images, segmentation masks, canopy cover data, BLUEs, weather, reference traits) deposited at ETH Research Collection, plus the authors' canopy cover extraction workflow code on GitLab. Both are paper-specific, public, andDataset · publicason, therefore,
from 2020 to 2022, photosynthetic photon fluence rate (PPFR) was taken from a LI-COR sensor placed next to the
field. The factor to convert radiation in MJ m−
2 to PPFR was 2.04 according to [26].
4.1 Data Files and Structure
The dataset presented in this study is available at ETH Research Collection under DOI: https://doi.org/10.3929/ethz-b-000742401. The dataset is structured into directories that align with the described data processing
pipeline used for extracting and analyzing canopy cover traits from field images. All files are provided in interoperable
and widely-used ‘.csv‘ and ‘.png‘ format.
• data/Design 2015 2022 Eschikon.csv: Experimental design file, including pOpen asset ↗ETH Research Collection · 10.3929/ethz-b-000742401pdf-raw-page:6 lines:1-47Code · publicCollection (https://doi.org/10.3929/ethz-b-000742401) and as Hugging Face data set card (doi.org/10.57967/hf/6052) allowing
interoperability and standardization with other datasets.
9 Code availability
Users with similar data can use the implemented workflow to get canopy cover from their experiments. The code
is available on: https://gitlab.ethz.ch/crop_phenotyping/fip-soybean-canopycover
10 Author contributions
BK: Developed algorithm, analyzed data and drafted manuscript; NK, LR, AH, AM: FIP development, BK, NK,
CO, LK, LR, OZ, SC, FL, HA, NS, FT, HZ, CAB, CB, AH: Collected and prepared data; Experimental design:
BK, LK, LR, AH; all authors improved and approved the manuscript
5Open asset ↗gitlab.ethz.ch · crop_phenotyping/fip-soybean-canopycoverpdf-raw-page:7 lines:1-46Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
Chlorophyll breakdown is a central process during plant senescence or stress responses and leaf chlorophyll content is therefore a strong predictor of plant health. Chlorophyll quantification can be done in several ways, most of which are time-consuming or require specialized equipment. A simple alternative to these methods is the use of image-based chlorophyll estimation, which uses the color values in RGB images to calculate colorimetric visual indexes as a measure for the leaf chlorophyll content. Image-based chlorophyll measurement is non-destructive and, apart from a digital camera, requires no specialized equipment. Here, we developed the ImageJ plugin GreenLeafVI that facilitates high-throughput image analysis for measuring leaf chlorophyll content. Our plugin offers the option to white-balance images to decrease variation between images and has an optional background removal step. We show that this method can reliably quantify leaf chlorophyll content in a variety of plant species. In addition, we show that image-based chlorophyll quantification can replicate GWAS results based on traditional chlorophyll extraction methods, showing that this method is highly accurate.
Why it matches plant phenotyping methods葉のクロロフィル量を画像から推定するFIJIプラグインを開発し、複数植物種で信頼性とGWAS再現性を検証しており、植物フェノタイピング手法が中心である。
abstractHere, we developed the ImageJ plugin GreenLeafVI that facilitates high-throughput image analysis for measuring leaf chlorophyll content.
Reproduction assets foundThe paper's GreenLeafVI FIJI plugin (the authors' phenotyping analysis code) is publicly available on GitHub with explicit availability language. The underlying phenotype/trait datasets are only available upon request, so they do not qualify as public assets.Code · publicank BSc/MSc students Marion Larue, Karin Verkerk and Kim Roos for their help in phenotyping.
28
29
30 Data availability
31 The data that support the findings of this study are available from the corresponding author upon reasonable
32 request. The GreenLeafVI source code, documentation and further information is available at
33 https://github.com/jelmervanlieshout/GreenLeafVI.
9Open asset ↗jelmervanlieshout/GreenLeafVIpdf-layout-page:9 lines:1-45Code / dataset availability confirmedEurope PMC · OpenAlex · checked 13 Sept 2026
Abstract To watch the growth of 1200 P. sylvestris cv. Negorelskaya trees from seeds to young or even old stage is a big grant project. We want to make a «seed–culture» passport. Each individual seed (N = 1200) was weighed, and image acquisition via a flatbed scanner in the VIS wavelength region and seeded into an individual 120 cm 3 cell of a 40-cell container. On day 30, container-grown germination was evaluated according to the following dichotomous criterion: 1 – germinated (n 1 = 942), 0 – did not germinate (n 0 = 258), and 0-group and 1-group datasets were formed. The RGB space color of the individual seed epidermis between the 0- and the 1-group were compared via the Kolmogorov‒Smirnov criterion D. The lower individual weight of the seed in the 0-group compared with the 1-group was not accidental (p = 0.0045). Additionally, in the 0 group, the median values of R, G, and B brightness of pixels from individual seeds are not accidental (p = 0.0000381) compared with those of the 1 group. Therefore, in this experiment, seeds that reflected most of the light from the epidermis showed a lower germination when placed in the container.
Why it matches plant phenotyping methods個体種子を対象にスキャナ画像からRGB形質を抽出し、発芽との関連を評価する画像ベースの表現型取得が研究の中心である。
abstractimage acquisition via a flatbed scanner in the VIS wavelength region
Reproduction assets foundThe paper's data availability statement openly deposits all three paper-specific phenotyping assets in Mendeley Data: Dataset 1 (individual seed morphometric/weight data, N=1200), Dataset 2 (original VIS flatbed-scanner seed images, N=1200), and Dataset 3 (individual container germination data, N=1200). These directly供Dataset · publicThe original morphometric data—Dataset 1—of Pinus sylvestris L. сv. The individual Negorelskaya seeds (N = 1200) presented in the study are openly available in Mendeley Data at DOI : https://doi.org/10.17632/8g258nbgmf.1.Open asset ↗Mendeley Data · 10.17632/8g258nbgmf.1lines:152-174Dataset · publicThe original VIS image data of Pinus sylvestris L. сv. The individual Negorelskaya seeds (N = 1200) presented in the study are openly available in Mendeley Data at DOI : https://doi.org/10.17632/dt78jhyw2j.2.Open asset ↗Mendeley Data · 10.17632/dt78jhyw2j.2lines:152-174Dataset · publicThe original germination data—Dataset 3—of Pinus sylvestris L. cv. The individual Negorelskaya seeds (N = 1200) presented in the study are openly available in Mendeley Data at DOI : https://doi.org/10.17632/hrs3fgc8tt.1.Open asset ↗Mendeley Data · 10.17632/hrs3fgc8tt.1lines:152-174Code / dataset availability confirmedarXiv · checked 6 Sept 2026
Observer bias and inconsistencies in traditional plant phenotyping methods limit the accuracy and reproducibility of fine-grained plant analysis. To overcome these challenges, we developed TomatoMAP, a comprehensive dataset for Solanum lycopersicum using an Internet of Things (IoT) based imaging system with standardized data acquisition protocols. Our dataset contains 64,464 RGB images that capture 12 different plant poses from four camera elevation angles. Each image includes manually annotated bounding boxes for seven regions of interest (ROIs), including leaves, panicle, batch of flowers, batch of fruits, axillary shoot, shoot and whole plant area, along with 50 fine-grained growth stage classifications based on the BBCH scale. Additionally, we provide 3,616 high-resolution image subset with pixel-wise semantic and instance segmentation annotations for fine-grained phenotyping. We validated our dataset using a cascading model deep learning framework combining MobileNetv3 for classification, YOLOv11 for object detection, and MaskRCNN for segmentation. Through AI vs. Human analysis involving five domain experts, we demonstrate that the models trained on our dataset achieve accuracy and speed comparable to the experts. Cohen's Kappa and inter-rater agreement heatmap confirm the reliability of automated fine-grained phenotyping using our approach.
Why it matches plant phenotyping methods植物の多視点画像取得、アノテーション付きデータセット、深層学習による分類・検出・セグメンテーションを中心に開発・検証した、明確な植物フェノタイピング手法研究です。
abstractwe developed TomatoMAP, a comprehensive dataset for Solanum lycopersicum using an Internet of Things (IoT) based imaging system with standardized data acquisition protocols.
Reproduction assets foundThe paper's TomatoMAP dataset (images, annotations) is publicly deposited in e!DAL at IPK with an explicit DOI URL given in the Data Records section.Dataset · publicDataset is deposited in e!DAL (electronic data archive library) of IPK (Leibniz Institute of Plant Genetics
and Crop Plant Research): https://doi.ipk-gatersleben.de/DOI/10bb9f14-ce90-4747-836f-cf61dfb5eea1/Open asset ↗e!DAL · 10bb9f14-ce90-4747-836f-cf61dfb5eea1pdf-page:7 lines:1-73Code / dataset availability confirmedCrossref · checked 15 Sept 2026
This study presents a novel and efficient approach to accurately assess post-sowing rice plant density by leveraging unmanned aerial vehicles (UAVs) equipped with high-resolution RGB cameras. In contrast to labor-intensive and spatially limited traditional methods that rely on manual sampling and extrapolation, our proposed methodology uses UAVs to rapidly and comprehensively survey entire paddy fields at optimized altitudes (4, 6, 8, and 10 m). Aerial imagery was autonomously acquired 17 days post-sowing, following a pre-defined flight path. The robust rice plant density estimation process incorporates two key innovations: first, a dynamic system of 12 adaptive segmentation thresholding blocks that effectively detects rice seed presence across diverse and variable background conditions. Second, a tailored three-layer convolutional neural network (CNN) accurately classifies vegetative situations. To maximize the training efficiency and performance, we implemented both a pretrained model and a deep learning model, conducting a rigorous comparative analysis against the state-of-the-art YOLOv10. Notably, under favorable imaging conditions, our findings indicate that a 6-m flight altitude yields optimal results, achieving a high degree of accuracy with rice plant density estimates that closely align with those obtained through traditional ground-based methods. This investigation unequivocally highlights the significant advantages of UAV-based monitoring as an economically viable, spatially comprehensive, and demonstrably accurate tool for precise rice field management, ultimately contributing to enhanced crop yields, improved food security, and the promotion of sustainable agricultural practices.
Why it matches plant phenotyping methodsUAV RGB画像と適応的セグメンテーション、CNNを用いてイネ個体密度を推定する手法を開発・比較・検証しており、植物形質の取得が研究の中心です。
abstractThis study presents a novel and efficient approach to accurately assess post-sowing rice plant density by leveraging unmanned aerial vehicles (UAVs) equipped with high-resolution RGB cameras.
Reproduction assets foundThe paper's data availability statement points to a public Zenodo deposit containing the study's datasets (UAV RGB imagery/labels used for rice plant density estimation). No separate author analysis code repository is stated.Dataset · publicvaluate the accuracy of the proposed labels, subsequently enhancing the training model's speed, convergence, accuracy, and efficiency.
Statements
Data availability statement
The datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found at: https://zenodo.org/records/10960906 .
Author contributions
TH: Writing – original draft. TN: Data curation, Resources, Validation, Writing – original draft. QN: Data curation, Writing – review & editing. HN: Funding acquisition, Investigation, Methodology, Writing – review & editing. PP: Methodology, Software, Supervision, Writing – review & editing.
Funding
TheOpen asset ↗zenodo · 10960906lines:500-523Code / dataset availability confirmedCrossref · checked 6 Sept 2026
Object detection is essential for precision agriculture applications like automated plant counting, but the minimum dataset requirements for effective model deployment remain poorly understood for arable crop seedling detection on orthomosaics. This study investigated how much annotated data is required to achieve standard counting accuracy (R2 = 0.85) for maize seedlings across different object detection approaches. We systematically evaluated traditional deep learning models requiring many training examples (YOLOv5, YOLOv8, YOLO11, RT-DETR), newer approaches requiring few examples (CD-ViTO), and methods requiring zero labeled examples (OWLv2) using drone-captured orthomosaic RGB imagery. We also implemented a handcrafted computer graphics algorithm as baseline. Models were tested with varying training sources (in-domain vs. out-of-distribution data), training dataset sizes (10–150 images), and annotation quality levels (10–100%). Our results demonstrate that no model trained on out-of-distribution data achieved acceptable performance, regardless of dataset size. In contrast, models trained on in-domain data reached the benchmark with as few as 60–130 annotated images, depending on architecture. Transformer-based models (RT-DETR) required significantly fewer samples (60) than CNN-based models (110–130), though they showed different tolerances to annotation quality reduction. Models maintained acceptable performance with only 65–90% of original annotation quality. Despite recent advances, neither few-shot nor zero-shot approaches met minimum performance requirements for precision agriculture deployment. These findings provide practical guidance for developing maize seedling detection systems, demonstrating that successful deployment requires in-domain training data, with minimum dataset requirements varying by model architecture.
Why it matches plant phenotyping methodsトウモロコシ幼苗の個体数という植物形質を画像から推定する物体検出手法について、複数モデル、データ量、アノテーション品質を系統的に比較・評価しており、手法の性能検証が中心である。
abstractThis study investigated how much annotated data is required to achieve standard counting accuracy (R2 = 0.85) for maize seedlings across different object detection approaches.
Reproduction assets foundThe paper's Data Availability Statement provides two paper-specific public assets: the authors' handcrafted-method analysis code on a GitHub gist and the ID (in-distribution) annotation datasets created for this study on Zenodo. Both have explicit availability language and public URLs.Code · publicThe code for the handcrafted methods used in this study is available at
https://gist.github.com/SamueleBumbaca/4a227bbe7b78d6be3424899c16c60bb4 (accessed on 20
June 2025).Open asset ↗gist.github.com/SamueleBumbacapdf-page:23 lines:1-52Dataset · publicThe datasets created during this study (ID datasets) are available at the Zenodo repository
https://doi.org/10.5281/zenodo.15235602 (accessed on 20 June 2025)Open asset ↗Zenodo · 10.5281/zenodo.15235602pdf-page:23 lines:1-52Code / dataset availability confirmedOpenAlex · Europe PMC · checked 6 Sept 2026
Freeze injury during the seedling stage significantly impacts wheat growth and yield, making the development of freeze-tolerant varieties crucial for ensuring stable yields. To identify key genetic factors for wheat freeze tolerance, an accurate assessment of freeze tolerance is necessary. However, traditional methods, such as visual inspection, are subjective and can vary significantly among observers. In this study, we developed FreezeNet, a lightweight deep learning model designed to accurately quantify freeze injury using an image-based phenotyping method. Freeze tolerance traits, including vegetation area (VA), green vegetation area (GVA), yellow vegetation fraction (YVF), and mean hue value (mHue), were extracted for freeze tolerance assessment. We captured standardized images with a smartphone and used FreezeNet to extract the freeze tolerance traits for 220 wheat accessions. These traits were strongly correlated with traditional injury scores estimated through visual inspection. Moreover, they presented relatively high heritability. Using these traits, we conducted genome-wide association studies (GWASs) to identify genetic loci associated with freeze tolerance. Eleven significant QTLs associated with freeze tolerance were identified, including 8 novel loci. By integrating four of these loci into a wheat germplasm that lacked any of the 11 QTLs, we significantly enhanced its freeze resistance, demonstrating the practical application of these genetic loci in breeding for improved freeze tolerance. Our results highlight FreezeNet as an advanced tool for assessing wheat freeze injury and identifying the genetic factors responsible for freeze tolerance, with the potential to guide breeding efforts toward the development of more resilient wheat varieties.
Why it matches plant phenotyping methodsFreezeNetは画像ベースでコムギの凍害形質を定量化する深層学習手法として開発・検証されており、植物フェノタイピング手法が研究の中心です。
abstractwe developed FreezeNet, a lightweight deep learning model designed to accurately quantify freeze injury using an image-based phenotyping method.
Reproduction assets foundThe paper's data availability statement explicitly deposits the full FreezeNet implementation and trained model on the authors' public GitHub repository, which directly reproduces the paper's image-based freeze-injury phenotyping analysis. The 430 field images and trait tables are not stated as separately deposited (noCode · publicThe full implementation and the trained FreezeNet model are available in GitHub at the following URL: https://github.com/Jiang-Phenomics-Lab/FreezeNet .Open asset ↗Jiang-Phenomics-Lab/FreezeNetlines:199-214Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Abstract Leaf spot is a devastating disease in cultivated peanut ( Arachis hypogaea L.) that can lead to significant yield losses without chemical controls. Multiple disease symptoms, two causal organisms, inconsistent testing environments, and genotype by environment interactions are all components that make breeding for leaf spot‐resistant peanuts challenging. To better understand this disease, and make gains in breeding for disease resistance, an accurate and objective phenotyping strategy must be implemented. In this work, data derived from leaf scans, unoccupied aerial vehicle‐captured red, green, blue and multispectral imagery were evaluated as a replacement for the subjective visual rating scale used at present. Standard operating procedures are detailed for all digital methods evaluated in this paper, and all digital phenotypes are fully characterized with descriptive statistics. Feature importance and post hoc proof of concept studies are conducted to further evaluate the new digital methods. Ultimately, “visible atmospherically resistant index” was selected as the most appropriate proxy for visual ratings and should be deployed by researchers and plant breeders in the peanut community for the objective evaluation of leaf spot resistance.
Why it matches plant phenotyping methods落花生葉斑病の客観的表現型評価を目的に、葉スキャンおよびUAVのRGB・マルチスペクトル画像を用いるデジタル手法を評価・標準化しており、病害表現型の取得法が中心である。
abstractan accurate and objective phenotyping strategy must be implemented
Reproduction assets foundThe paper deposits its phenotyping datasets (visual ratings, leaf scans, UAV RGB/multispectral imagery) in Dryad and hosts analysis scripts and supporting information in a public GitHub repository, both explicitly linked by the authors.Dataset · publicUS
Department of Agriculture is an equal opportunity provider
and employer.
C O N F L I C T O F I N T E R E S T S TAT E M E N T
The authors declare no conflicts of interest.
DATA AVA I L A B I L I T Y S TAT E M E N T
The datasets generated during and/or analyzed during the cur-
rent study are available in the Dryad repository: https://doi.org/10.5061/dryad.rn8pk0pnm.O RC I D
RyanAndres https://orcid.org/0000-0001-8635-4077
JeffreyDunne https://orcid.org/0000-0003-0544-9889
R E F E R E N C E S
Anco, D. J., Thomas, J. S., Jordan, D. L., Shew, B. B., Monfort, W. S.,
Mehl, H. L., Small, I. M., Wright, D. L., Tillman, B. L., Dufault, N.
S., Hagan, A. K., & Campbell, H. L. (2020). Peanut yield losOpen asset ↗Dryad · 10.5061/dryad.rn8pk0pnm.Opdf-raw-page:15 lines:1-82Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Noninvasive analysis of pod phenotypic traits under field conditions is crucial for soybean breeding research. However, previous pod phenotyping studies focused on postharvest materials or were limited to indoor scenarios, failing to generalize to real-field environments. To address these issues, this paper employs an instance segmentation approach for the precise extraction of the pod area from multiplant RGB images in preharvest soybean fields. We first introduce a cost-effective workflow for constructing datasets of densely planted crop images with a uniform backdrop. Starting with video recording, high-quality static frames are collected by automatic selection. Then, a large vision model is explored to facilitate dense annotation and build a large-scale soybean dataset comprising 20k pod masks. Second, the pod instance segmentation model PodNet is developed based on the YOLOv8 architecture. We propose a novel hierarchical prototype aggregation strategy to fuse multiscale semantic features and a U-EMA prototype generation network to improve the model's perception performance for small objects. Comprehensive experiments suggest that lightweight PodNet achieves a superior mean average accuracy of 0.786 in the custom pod segmentation dataset. PodNet also performs competitively on in-field images without a backdrop and enables real-time inference on the edge computing platform. To the best of our knowledge, PodNet is the first pod instance segmentation model for preharvest fields. The low-cost and high-precision extraction of pods is not only a prerequisite for phenotypic analysis of the pod organs but also constitutes an important foundation in conducting cross-scale phenotyping from whole-plant to seed levels.
Why it matches plant phenotyping methods大豆莢の表現型抽出を目的に、データセット構築、インスタンスセグメンテーションモデル、実環境での性能評価を中心的に開発しているため。
abstractNoninvasive analysis of pod phenotypic traits under field conditions is crucial for soybean breeding research.
Reproduction assets foundThe authors open-source the field soybean pod instance segmentation dataset (488 images, 20k pod masks) and PodNet-related resources at their public GitHub repository, explicitly stated in the data availability statement.Dataset · publicefficiency of manual annotation. The average pod number per image is more than 56, and the total number of pod objects is greater than 20k. Fig. 7 (c) shows that most of the pods are located in the upper center region of the image. The field soybean pod instance segmentation dataset is open sourced for the research community at https://github.com/Boatsure/PodNet .
3.2.
Implementation and experiments of PodNet
Considering that instance segmentation is a computationally intensive task, this study selected the lightweight architecture YOLOv8-nano (v8n) as the baseline model for the development of PodNet. Model v8n has simplified module connections and competitive perception accuracy whileOpen asset ↗Boatsure/PodNetlines:96-104Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
The spike number (SN) is an important trait that significantly impacts grain yield in wheat. Manual counting of SN is time-consuming, hindering large-scale breeding efforts. Hence, there is an urgent need to develop efficient and accurate methodologies for SN counting. A YOLOX algorithm was used to determine the optimal growth stage for developing wheat spike detection models among recombinant inbred lines (RILs) across Zhongmai 175 × Lunxuan 987 and a diverse panel of 166 cultivars. We subsequently increased the precision of spike identification by developing a new YOLOX-P algorithm that incorporates the convolutional block attention module and increasing the resolution of the input images. We also used these SN data to identify underlying loci in the Zhongmai 578 × Jimai 22 RIL population. The results revealed that the late grain-filling stage presented the highest precision among the SN detection models, with accuracies ranging from 91.8 to 95.02 %. The improved YOLOX-P algorithm demonstrated higher mean average precision scores (5.30-5.99 %) and F1 scores (0.06) than did the YOLOX algorithm when it was applied to the same subsets. Three new SN loci, namely, QSN . caas-4A2, QSN . caas-4D and QSN . caas-5B2 , were identified using the 50k SNP arrays. Two kompetitive allele-specific PCR markers linked with QSN . caas-4A2 and QSN . caas-5B2 were developed, and their genetic effects were validated in a diverse panel of 166 cultivars. These findings provide useful tools for high-throughput identification of SNs and novel loci in wheat.
Why it matches plant phenotyping methodsRGB画像とコンピュータビジョンによりコムギの穂数を自動推定する手法を開発・比較し、精度を評価しているため、植物フェノタイピング手法が中心である。
abstractHence, there is an urgent need to develop efficient and accurate methodologies for SN counting.
Reproduction assets foundThe paper publicly releases two paper-specific assets: (1) a wheat spike number image dataset (subsets CD&DD&XX) on GitHub, and (2) the YOLOX-P analysis code on Google Drive. Both have explicit availability statements with author-provided URLs.Dataset · publicThe image set for CD&DD&XX is publicly available on GitHub ( https://github.com/lileimax/YOLOXP-wheat-spike-identification ).Open asset ↗https://github.com/lileimax/YOLOXP-wheat-spike-identificationlines:223-246Code · publicThe code for YOLOX-P is publicly available on Google Drive ( https://drive.google.com/drive/folders/1urCDUdyrq14FuwG2I3YwCZraUGEEl_8X?usp=sharing ).Open asset ↗lines:247-250Code / dataset availability confirmedOpenAlex · Europe PMC · bioRxiv · checked 15 Sept 2026
Abstract High-throughput phenotyping is addressing the current bottleneck in phenotyping within breeding programs. Imaging tools are becoming the primary resource for improving the efficiency of phenotyping processes and providing large datasets for genomic selection approaches. The advent of AI brings new advantages by enhancing phenotyping methods using imaging, making them more accessible to breeding programs. In this context, we have developed an open Python workflow for analyzing morphology and heritable morphometric traits using AI, which can be applied to fruits and other plant organs. This workflow has been implemented in almond (Prunus dulcis ), a species where efficiency is critical due to its long breeding cycle. Over 25,000 kernels, more than 20,000 nuts, and over 600 individuals have been phenotyped, making this the largest morphological study conducted in almond. As result, new heritable morphometric traits of interest have been identified. These findings pave the way for more efficient breeding strategies, ultimately facilitating the development of improved cultivars with desirable traits.
Why it matches plant phenotyping methodsAIを用いたRGB画像から果実の形態・形状形質を抽出するオープンPythonワークフローを開発・適用しており、植物表現型取得法が研究の中心である。
abstractwe have developed an open Python workflow for analyzing morphology and heritable morphometric traits using AI, which can be applied to fruits and other plant organs.
Reproduction assets foundThe paper's authors explicitly state their phenotyping workflow is open source and provide a public GitHub repository URL containing the Jupyter-notebook-based analysis pipeline (segmentation, morphometric analysis) used in this almond phenotyping study.Code · publicbe found in the workflow’s GitHub repository:
385
https://github.com/jorgemasgomez/almondcv2.386
Clearly, recent advancements in AI segmentation models, such as YOLO (Redmon et al.,
387
2016) and SAM (Kirillov et al., 2023), enable breeding programs to develop fine-tuned
388
models for specific applications, even without large datasets. Additionally, progress in
389
labeling tools like CVAT (Sekachev et al., 2020), which iOpen asset ↗https://github.com/jorgemasgomez/almondcv2.386pdf-raw-page:16 lines:1-90Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Image analysis can be useful for assessing crop health and predicting yield. Instead of expensive equipment, smartphones are considered an accessible and low-cost alternative. The objectives of this study were to evaluate whether fresh weight in green and red lettuce could be predicted by leaf color (intensity of green color measured by RGB) under different fertilizer treatments using RGB imaging from two widely used smartphone models (Samsung Galaxy and Apple iPhone). The two smartphones showed similar longitudinal patterns of RGB data (the intensity and dark green proportion), but the absolute difference in the RGB data was significantly different. Therefore, the averaged results were used for the analyses. Color intensity and dark green proportion were associated with the fresh lettuce weight (p = 0.005, 0.003, 0.014 and p < 0.001, respectively). This study suggests that farmers and practitioners can use these economic devices as a non-destructive method to diagnose and monitor the nutritional status and predict lettuce yield.
Why it matches plant phenotyping methodsスマートフォンRGB画像から葉色を抽出し、レタスの生体重・栄養状態を非破壊推定する手法が研究の中心であり、植物表現型取得への実質的な応用に該当する。
abstractsmartphones are considered an accessible and low-cost alternative
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe separated GIF files were uploaded to the image analysis program freely available at http://mkwak.org/imgarea .Open asset ↗lines:321-349Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
In complex farmland environments, wheat canopy coverage is insufficient at the tillering stage, posing a considerable challenge to the accurate extraction of its canopy using UAV(unmanned air vehicle) remote sensing images. In this paper, an end-to-end semantic segmentation method based on visible light (RGB) and thermal infrared (TIR) images, Tiff-SegFormer, which fused spectral features and temperature features effectively, is proposed for accurate pixel-level classification of winter wheat at the tillering stage images taken by UAV to segment the wheat canopy and background. Tiff-SegFormer utilizes hierarchical feature representation and efficient self-attention in the encoder stage to extract features of detail contours of RGB images and temperature changes of TIFF images, respectively. In the decoder stage, the features are concatenated and then the channel and spatial attention mechanisms are superimposed, aiming to further improve the segmentation accuracy and efficiency of winter wheat at the tillering stage in UAV remote sensing images. The results show that Tiff-SegFormer can achieve accurate segmentation of wheat canopy and background from UAV images of winter wheat at the tillering stage (mIoU = 84.28%, mPA = 88.97%, accuracy = 94.55%). In order to verify the efficiency of the proposed method, Tiff-SegFormer is compared with four widely used semantic segmentation methods, all of which show better performance. The four methods are UNet, DeepLabv3+, HRNet, SegFormer and four-channel (RGB + TIFF) Segformer. The generalization test shows that the proposed Tiff-SegFormer also achieves better performance than other comparison methods (mIoU = 84.94%, mPA = 91.46%, accuracy = 94.71%). Tiff-SegFormer provides a robust and efficient tool for segmenting winter wheat canopy from UAV remote sensing images of winter wheat at the tillering stage, and has great potential in applications (model implementation and results can be found at https://github.com/wylSUGAR/Tiff-SegFormer ).
Why it matches plant phenotyping methodsUAVのRGB・熱赤外画像から冬コムギのキャノピーを抽出するセマンティックセグメンテーション手法を開発し、複数手法との比較および汎化性能検証を行っており、植物状態の取得方法が中心である。
abstractan end-to-end semantic segmentation method based on visible light (RGB) and thermal infrared (TIR) images, Tiff-SegFormer, which fused spectral features and temperature features effectively, is proposed for accurate pixel-level classification of winter wheat at the tillering stage images taken by UAV to segment the wheat canopy and background.
Reproduction assets foundThe paper publicly releases the UAV RGB/TIR winter wheat tillering-stage image dataset and the TIR-to-TIFF conversion code via two author GitHub repositories. The Tiff-SegFormer model repository is referenced but its URL is not among the allowed URLs, and labelme is a generic third-party tool, so neither is included.Dataset · publicThe image can be found at
https://github.com/wylSUGAR/wheat_tillering_stage.Open asset ↗wylSUGAR/wheat_tillering_stagepdf-page:2 lines:56-74Code · publicthe TIR image was
converted into a TIFF image (the code can be found at https://github.com/wylSUGAR/TIR_DJ_tiff)Open asset ↗wylSUGAR/TIR_DJ_tiffpdf-page:2 lines:56-74Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Field / plotRGB / grayscalePanicle / ear / spikeClassificationObject detectionGrowth / development / phenology
This dataset is an expanded version of a previously published collection of high-resolution RGB images of Urochloa spp. genotypes, initially designed to facilitate automated classification of phenological stages and raceme identification in forage breeding trials. The original dataset included 2400 images of 200 genotypes captured under controlled conditions, supporting the development of computer vision models for High-Throughput Phenotyping (HTP). In this updated release, 139 additional images and 24,983 new annotations have been added, bringing the dataset to a total of 2539 images and 47,323 raceme annotations. This version introduces increased diversity in image-capture conditions, with data collected from two geographic locations (Palmira, Colombia, and Ocozocoautla de Espinosa, Mexico) and a range of image-capture devices, including smartphones (e.g. Realme C53 and Oppo Reno 11), a Nikon D5600 camera, and a Phantom 4 Pro V2 drone. Images now vary in perspective (nadir, high-angle, and frontal) and capture distance (1-3 meters), enhancing the dataset applicability for robust Deep Learning (DL) models. Compared to the original dataset, raceme density per plant has nearly doubled in some samples, offering higher raceme overlap for advanced instance segmentation tasks. This expanded dataset supports deeper exploration of phenotypic variation in Urochloa spp. and offers greater potential for developing adaptable models in crop phenotyping.
Why it matches plant phenotyping methods植物の生育ステージ分類と総状花序の同定を目的とする画像データセットで、注釈付き画像の拡張、撮影条件の多様化、インスタンスセグメンテーション用途が中心であり、再利用可能な表現型解析基盤に該当する。
abstractThis dataset is an expanded version of a previously published collection of high-resolution RGB images of Urochloa spp. genotypes, initially designed to facilitate automated classification of phenological stages and raceme identification in forage breeding trials.
Reproduction assets foundThe paper is a Data in Brief describing a public Harvard Dataverse deposit of the paper's own Urochloa spp. hybrid RGB images and COCO raceme annotations, with a direct DOI URL listed in allowed_urls.Dataset · publicupo Papalotla
City 1: Palmira, Valle del Cauca.
City 2: Ocozocoautla de Espinosa, Chiapas.
Country 1: Colombia.
Country 2: Mexico.
Geolocalization 1: 3°29’N, 76°21’W
Geolocalization 2: 16°45′N 93°28′W
Data accessibility
Repository name: Harvard Dataverse
Data identification number: doi.org/10.7910/DVN/X4LM19
Direct URL to data: https://doi.org/10.7910/DVN/X4LM19Open asset ↗Harvard Dataverse · 10.7910/DVN/X4LM19lines:1-51Code / dataset availability confirmedOpenAlex · Crossref · checked 14 Sept 2026
Alfalfa is a deep-rooted perennial forage crop with diverse drought-tolerant traits. This study evaluated 250 alfalfa half-sib populations over three growing seasons (2021–2023) under irrigated and rainfed conditions in the Mediterranean drought-prone region of Central Chile (Cauquenes), aiming to identify high-yielding, drought-tolerant populations using remote sensing. Specifically, we assessed RGB-derived indices and canopy temperature difference (CTD; Tc − Ta) as proxies for forage yield (FY). The results showed considerable variation in FY across populations. Under rainfed conditions, winter FY ranged from 1.4 to 6.1 Mg ha−1 and total FY from 3.7 to 14.7 Mg ha−1. Under irrigation, winter FY reached up to 8.2 Mg ha−1 and total FY up to 25.1 Mg ha−1. The AlfaL4-5 (SARDI7), AlfaL57-7 (WL903), and AlfaL62-9 (Baldrich350) populations consistently produced the highest yields across regimes. RGB indices such as hue, saturation, b*, v*, GA, and GGA positively correlated with FY, while intensity, lightness, a*, and u* correlated negatively. CTD showed a significant negative correlation with FY across all seasons and water regimes. These findings highlight the potential of RGB imaging and CTD as effective, high-throughput field phenotyping tools for selecting drought-resilient alfalfa genotypes in Mediterranean environments.
Why it matches plant phenotyping methodsRGB画像指標と冠層温度差を用いた高スループット表現型解析を、アルファルファ集団の収量・干ばつ耐性選抜に実質的に適用しており、表現型取得手法が中心的である。
titleSelecting High Forage-Yielding Alfalfa Populations in a Mediterranean Drought-Prone Environment Using High-Throughput Phenotyping
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicthe Mosaic tool software and Cereal-Scanner plugin,
developed by Shawn Kefauver from the University of Barcelona, were utilized for further
analysis (available at https://gitlab.com/sckefauver/cerealscanner (accessed on 6 March
2025)).Open asset ↗gitlab.com/sckefauver/cerealscannerpdf-page:7 lines:1-55Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Controlling forage quality and grazing are crucial for sustainable livestock production, health, productivity, and animal performance. However, the limited availability of reliable handheld sensors for timely pasture quality prediction hinders farmers’ ability to make informed decisions. This study investigates the in-field dynamics of Mombasa grass (Megathyrsus maximus) forage biomass production and quality using optical techniques such as visible imaging and near-infrared (VIS-NIR) hyperspectral proximal sensing combined with machine learning models enhanced by covariance-based error reduction strategies. Data collection was conducted using a cellphone camera and a handheld VIS-NIR spectrometer. Feature extraction to build the dataset involved image segmentation, performed using the Mahalanobis distance algorithm, as well as spectral processing to calculate multiple vegetation indices. Machine learning models, including linear regression, LASSO, Ridge, ElasticNet, k-nearest neighbors, and decision tree algorithms, were employed for predictive analysis, achieving high accuracy with R2 values ranging from 0.938 to 0.998 in predicting biomass and quality traits. A strategy to achieve high performance was implemented by using four spectral captures and computing the reflectance covariance at NIR wavelengths, accounting for the three-dimensional characteristics of the forage. These findings are expected to advance the development of AI-based tools and handheld sensors particularly suited for silvopastoral systems.
Why it matches plant phenotyping methods画像・VIS-NIRセンシング、画像セグメンテーション、特徴抽出、機械学習による牧草バイオマスおよび品質形質の推定が研究の中心であり、植物フェノタイピング手法の開発・応用に該当する。
abstractThis study investigates the in-field dynamics of Mombasa grass (Megathyrsus maximus) forage biomass production and quality using optical techniques such as visible imaging and near-infrared (VIS-NIR) hyperspectral proximal sensing combined with machine learning models enhanced by covariance-based error reduction strategies.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicSupplementary Materials: The following supporting information can be downloaded at: https://
www.mdpi.com/article/10.3390/agriengineering7040111/s1. Database S1: Database of experiment.Open asset ↗Database S1pdf-page:27 lines:1-54Code / dataset availability confirmedCrossref · Europe PMC · OpenAlex · checked 6 Sept 2026
With the rapid advancements in computer vision and deep learning, multi-view stereo (MVS) based on conventional RGB cameras has emerged as a promising and cost-effective tool for botanical research. However, existing methods often struggle to capture the intricate textures and fine edges of plants, resulting in suboptimal 3D reconstruction accuracy. To overcome this challenge, we proposed Edge_MVSFormer on the basis of TransMVSNet, which particularly focuses on enhancing the accuracy of plant leaf edge reconstruction. This model integrates an edge detection algorithm to augment edge information as input to the network and introduces an edge-aware loss function to focus the network’s attention on a more accurate reconstruction of edge regions, where depth estimation errors are obviously more significant. Edge_MVSFormer was pre-trained on two public MVS datasets and fine-tuned with our private data of 10 model plants collected for this study. Experimental results on 10 test model plants demonstrated that for depth images, the proposed algorithm reduces the edge error and overall reconstruction error by 2.20 ± 0.36 mm and 0.46 ± 0.07 mm, respectively. For point clouds, the edge and overall reconstruction errors were reduced by 0.13 ± 0.02 mm and 0.05 ± 0.02 mm, respectively. This study underscores the critical role of edge information in the precise reconstruction of plant MVS data.
Why it matches plant phenotyping methods植物の葉のエッジと3D形状を高精度に再構築するMVS手法を開発・評価しており、植物表現型取得の方法が中心である。
titleEdge_MVSFormer: Edge-Aware Multi-View Stereo Plant Reconstruction Based on Transformer Networks
Reproduction assets foundThe paper's Data Availability Statement explicitly states that the dataset (private multi-view plant images with ground truth point clouds/depth maps) and the code used in this study are publicly available on Zenodo, with the URL matching an allowed URL.Code · publicThe dataset and code used in this study are publicly available at the webpage https://zenodo.org/records/15086606 with a DOI: 10.5281/zenodo.15086606, accessed on 19 March 2025.Open asset ↗zenodo · 10.5281/zenodo.15086606lines:95-266Code / dataset availability confirmedEurope PMC · OpenAlex · checked 6 Sept 2026
The unmanned aerial vehicle (UAV) platform has emerged as a powerful tool in soybean (Glycine max (L.) Merr.) breeding phenotype research due to its high throughput and adaptability. However, previous studies have predominantly relied on statistical features like vegetation indices and textures, overlooking the crucial structural information embedded in the data. Feature fusion has often been confined to a one-dimensional exponential form, which can decouple spatial and spectral information and neglect their interactions at the data level. In this study, we leverage our team's cross-circling oblique (CCO) route photography and Structure-from-Motion with Multi-View Stereo (SfM-MVS) techniques to reconstruct the three-dimensional (3D) structure of soybean canopies. Newly point cloud deep learning models SoyNet and SoyNet-Res were further created with two novel data-level fusion that integrate spatial structure and color information. Our results reveal that incorporating RGB color and vegetation index (VI) spectral information with spatial structure information, leads to a significant reduction in root mean square error (RMSE) for yield estimation (22.55 kg ha -1 ) and an improvement in F1-score for five-class lodging discrimination (0.06) at S7 growth stage. The SoyNet-Res model employing multi-task learning exhibits better accuracy in both yield estimation (RMSE: 349.45 kg ha -1 ) when compared to the H2O-AutoML. Furthermore, our findings indicate that multi-task deep learning outperforms single-task learning in lodging discrimination, achieving an accuracy top-2 of 0.87 and accuracy top-3 of 0.97 for five-class. In conclusion, the point cloud deep learning method exhibits tremendous potential in learning multi-phenotype tasks, laying the foundation for optimizing soybean breeding programs.
Why it matches plant phenotyping methodsUAV・SfM-MVSによるダイズ群落の3D構造再構成と、収量推定・倒伏判別のための専用深層学習モデル開発が研究の中心であり、再利用可能な表現型取得・推定手法に該当する。
abstractIn this study, we leverage our team's cross-circling oblique (CCO) route photography and Structure-from-Motion with Multi-View Stereo (SfM-MVS) techniques to reconstruct the three-dimensional (3D) structure of soybean canopies.
Reproduction assets foundThe article's Data availability statement explicitly says the code and data used in the study (soybean UAV point cloud phenotyping, SoyNet/SoyNet-Res models, yield/lodging analysis) are publicly downloadable from the authors' GitLab repository.Code · publicData availability
The code and data mentioned in the article can be downloaded from https://gitlab.com/zlyzly28/plant-phenomics .Open asset ↗gitlab.com/zlyzly28/plant-phenomicslines:588-659Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
Published12 Mar 2025Investigaciones Geográficas Boletín del Instituto de GeografíaCited by 1 · OpenAlex ↗
This study employs photogrammetry to evaluate and monitor the recovery of the cypress forest on Guadalupe Island, Mexico, an ecosystem significantly impacted by fires and overgrazing. Two drone surveys were conducted over the forest area during the summers of 2016 and 2019 using natural color (RGB) and near-infrared (NIR) cameras. This work presents the first complete 3D reconstruction of the cypress forest on the island. The image processing products include the canopy height model (CHM), digital surface model (DSM), and digital terrain model (DTM), which were utilized to calculate the number, density, height and crown projected areas of trees. The CHM showed a high correlation with the forest's structure (R = 0.92), based on field measurements of tree heights. Our study accounted for approximately 67,340 trees taller than two meters in 2019. Over 90% of the cypress population consisted of young trees between 2 and 3 meters tall, which have recovered significantly following a fire in 2008 that burned 70% of its extent. A horizontal expansion of 134 hectares was observed from 2016 to 2019 in the regeneration process.
Why it matches plant phenotyping methodsドローン画像のフォトグラメトリによる3D再構成を用いて樹木の高さ・密度・樹冠面積を推定し、現地測定との相関で検証しているため、植物形質の取得手法が中心です。
abstractThis study employs photogrammetry to evaluate and monitor the recovery of the cypress forest on Guadalupe Island, Mexico
Reproduction assets foundThe paper's photogrammetric phenotyping products (2016/2019 point clouds, orthomosaics, DSMs, CHMs) are publicly downloadable via a DOI data repository, and supplemental crown/treetop features are in CICESE's institutional repository. Both URLs appear in allowed_urls.Dataset · publicees. This phenomenon can be seen
in the three years observation window (2016-2019)
using photogrammetry.
AVAILABILITY OF DATA
AND MATERIALS
Point clouds from the 2016 and 2019 photogram-
metric reconstructions, as well as orthomosaics,
digital surface models (DSMs), and canopy height
models (CHMs), are available for download in
https://doi.org/10.5069/G9668BDD and https://
doi.org/10.5069/G92J693D. Supplemental infor-
mation such as Features related to crown and tree-
tops are accessible through CICESE’s institutional
repository (https://repositoriobiblioteca.cicese.mx/jspui/handle/123456789/44)
REFERENCES
Aljos-Farjon. (2017). A handbook of the world’s conifers
(second ed., vol. 1).Open asset ↗10.5069/G9668BDD · 10.5069/G9668BDDpdf-raw-page:15 lines:1-89Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 6 Sept 2026
In the early stages of selection, many plant breeding programmes still rely on visual evaluations of traits by experienced breeders. While this approach has proven to be effective, it requires considerable time, labour and expertise. Moreover, its subjective nature makes it difficult to reproduce and compare evaluations. The field of automated high-throughput phenotyping aims to resolve these issues. A widely adopted strategy uses drone images processed by machine learning algorithms to characterise phenotypes. This approach was used in the present study to assess the dry matter yield of tall fescue and its accuracy was compared to that of the breeder's evaluations, using field measurements as ground truth. RGB images of tall fescue individuals were processed by two types of predictive models: a random forest and convolutional neural network. In addition to computing dry matter yield, the two methods were applied to identify the top 10% highest-yielding plants and predict the breeder's score. The convolutional neural network outperformed the random forest method and exceeded the predictive power of the breeder's eye. It predicted dry matter yield with an R² of 0.62, which surpassed the accuracy of the breeder's score by 8 percentage points. Additionally, the algorithm demonstrated strong performance in identifying top-performing plants and estimating the breeder's score, achieving balanced accuracies of 0.81 and 0.74, respectively. These findings indicate that the tested automated phenotyping approach could not only offer improvements in cost, time efficiency and objectivity, but also enhance selection accuracy. As a result, this technique has the potential to increase overall breeding efficiency, accelerate genetic progress, and shorten the time to market. To conclude, phenotyping by means of RGB-based machine learning models provides a reliable alternative or addition to the visual evaluation of selection candidates in a tall fescue breeding programme.
Why it matches plant phenotyping methodsRGBドローン画像と機械学習により乾物収量などの植物形質を推定し、育種家評価および実測値と比較検証しており、フェノタイピング手法が中心である。
abstractThe field of automated high-throughput phenotyping aims to resolve these issues.
Reproduction assets foundThe paper's data availability statement explicitly deposits the study's datasets (RGB image-derived phenotyping data for tall fescue yield prediction) on Zenodo and all analysis scripts on a public GitHub repository, both with URLs matching allowed_urls.Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://zenodo.org/records/14289667 .Open asset ↗zenodo · 14289667lines:530-564Code · publicAll scripts used are provided in the following GitHub repository: https://github.com/SarahGhysels/Estimation-of-individual-plant-performance-in-tall-fescue-through-RGB-image-analysis .Open asset ↗github · SarahGhysels/Estimation-of-individual-plant-performance-in-tall-fescue-through-RGB-image-analysislines:530-564Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · checked 6 Sept 2026
Plant height (PH) is a key agronomic trait influencing plant architecture. Suitable PH values for cotton are important for lodging resistance, high planting density, and mechanized harvesting, making it crucial to elucidate the mechanisms of the genetic regulation of PH. However, traditional field PH phenotyping largely relies on manual measurements, limiting its large-scale application. In this study, a high-throughput phenotyping platform based on UAV-mounted RGB and light detection and ranging (LiDAR) was developed to efficiently and accurately obtain time series PHs of 419 cotton accessions in the field. Different strategies were used to extract PH values from two sets of sensor data, and the extracted values were used to train using linear regression and machine learning methods to obtain PH predictions. These predictions were consistent with manual measurements of the PH for the LiDAR (R 2 = 0.934) and RGB (R 2 = 0.914) data. The predicted PH values were used for GWAS analysis, and 34 PH-related genes, two of which have been demonstrated to regulate PH in cotton, namely, GhPH1 and GhUBP15 , were identified. We further identified significant differences in the expression of a new gene named GhPH_UAV1 in the stems of the G. hirsutum cultivar ZM24 harvested on the 15th, 35th, and 70th days after sowing compared with those from a dwarf mutant ( pag1 ), which presented shortened stem and internode phenotypes. The overexpression of GhPH_UAV1 significantly promoted cotton stem development, whereas its knockout by CRISPR-Cas9 dramatically inhibited stem growth, suggesting that GhPH_UAV1 plays a positive regulatory role in cotton PH. This field-scale high-throughput phenotype monitoring platform significantly improves the ability to obtain high-quality phenotypic data from large populations, which helps overcome the imbalance between massive genotypic data and the shortage of field phenotypic data and facilitates the integration of genotype and phenotype research for crop improvement.
Why it matches plant phenotyping methodsUAV搭載RGB・LiDARによる綿花草丈の高スループット取得・推定プラットフォームの開発と精度検証が研究の中心であり、GWASや遺伝子機能解析は応用部分です。
abstracta high-throughput phenotyping platform based on UAV-mounted RGB and light detection and ranging (LiDAR) was developed to efficiently and accurately obtain time series PHs of 419 cotton accessions in the field
Reproduction assets foundThe paper's Data availability statement explicitly deposits the authors' source code, UAV-captured images, and analysis datasets in a public GitHub repository, which directly supports this paper's cotton plant-height phenotyping measurements and computational analysis.Code · publicThe source code, images captured by UAVs, data obtained from the analysis, and other datasets supporting the results presented here are available at https://github.com/Liqiangfan/419-cotton-plant-height-datasets .Open asset ↗Liqiangfan/419-cotton-plant-height-datasetslines:142-154Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
In this work, a unique database of 6726 multispectral images of coffee leaves is presented. These images were captured in JPG format for the RGB photos and in TIF format for the five multispectral bands: blue, green, red, NIR and red edge, providing a detailed view of different wavelengths of the electromagnetic spectrum. Images in TIF format have a color depth of 16 bits per pixel, ensuring good quality. The blue band (Band 1) captures light in the blue region of the spectrum, approximately 450 to 500 nm. The green band (Band 2) records light in the green region, approximately between 500 and 620 nm. The red band (Band 3) captures light in the red region, between 620 and 750 nm. The red-edge band (Band 4) lies between the red band and the NIR, and is sensitive to the transition between green vegetation and non-vegetation, around 840 nm. Finally, the near infrared band (Band 5) captures light in the near infrared region, between 750 and 900 nm. For ease of identification, images are labeled as follows: if the image name ends in 0, it is an RGB image; if it ends in 1, it corresponds to the blue band; if it ends in 2, to the green band; if it ends in 3, to the red band; if it ends in 4, to the red-edge band; and if it ends in 5, to the near-infrared band. The images show coffee leaves with and without lesions caused by the Hemileia vastatrix fungus, known as coffee rust. These samples were collected from Colombian coffee farms and the images were captured under controlled lighting conditions to ensure quality and consistency. This database is an invaluable resource for precision agriculture research and early detection of crop diseases. With these 6726 images, researchers can use advanced image processing and machine learning techniques to identify differences between healthy leaves and those affected by rust. This can lead to the development of effective predictive models, enabling early detection and more efficient management of diseases in coffee plantations, optimizing production and reducing economic losses for farmers.
Why it matches plant phenotyping methodsコーヒー葉の病斑という植物の病害状態を対象としたマルチスペクトル画像データセットであり、再利用可能なフェノタイピング用データセットの提供が中心です。
abstractIn this work, a unique database of 6726 multispectral images of coffee leaves is presented.
Reproduction assets foundThe paper is a data descriptor whose own multispectral coffee leaf image dataset is publicly deposited on Kaggle with an explicit direct URL and DOI, matching an allowed URL.Dataset · publicth of 16 bits per pixel .
Data source location
Institution: Escuela Colombiana de Ingeniería Julio Garavito University
City/Town/Region: Bogotá D.C.
Country: Colombia Latitude: 4.5983° * Longitude: 74.0051°.
Data accessibility
Repository name: Coffe Rust
Data identification number: 10.34740/kaggle/ds/5644659
Direct URL to data: https://www.kaggle.com/ds/5644659
Instructions for accessing these data: Data available free of charge to anyone with access to the Internet and the web server address provided.
Related research article
[ 1 ] Jorge Luis Aroca Trujillo, Alexander Pérez-Ruiz. “Technologies Applied in the Field of Early Detection of Coffee Rust Fungus Diseases: A Review.” Nongye JOpen asset ↗Kaggle · 10.34740/kaggle/ds/5644659lines:1-53Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Plant-pathogenic bacteria colonise their hosts using various strategies, exploiting both natural openings and wounds in leaves and roots. The vascular pathogen Xanthomonas campestris pv. campestris (Xcc) enters its host through hydathodes, organs at the leaf margin involved in guttation. Subsequently, Xcc breaches the hydathode-xylem barrier and progresses into the xylem vessels causing systemic disease. To elucidate the mechanisms that underpin the different stages of an Xcc infection, a need exists to image bacterial progression in planta in a non-invasive manner. Here, we describe a phenotyping setup and Python image analysis pipeline for capturing 16 independent Xcc infections in Arabidopsis thaliana plants in parallel over time. The setup combines an RGB camera for imaging disease symptoms and an ultrasensitive CCD camera for monitoring bacterial progression inside leaves using bioluminescence. The method reliably quantified bacterial growth in planta for two bacterial species, that is, vascular Xcc and the mesophyll pathogen Pseudomonas syringae pv. tomato (Pst). The camera resolution allowed Xcc imaging already in the hydathodes, yielding reproducible data for the first stages prior to the systemic infection. Data obtained through the image analysis pipeline was robust and validated findings from other bioluminescence imaging methods, while requiring fewer samples. Moreover, bioluminescence was reliably detected within 5 min, offering a significant time advantage over our previously reported method with light-sensitive films. Thus, this method is suitable to quantify the resistance level of a large number of Arabidopsis thaliana accessions and mutant lines to different bacterial strains in a non-invasive manner for phenotypic screenings.
Why it matches plant phenotyping methods植物感染を非侵襲的に画像化・定量するフェノタイピング装置とPython解析パイプラインを開発し、複数の細菌感染で検証しているため、方法が中心的です。
abstractHere, we describe a phenotyping setup and Python image analysis pipeline for capturing 16 independent Xcc infections in Arabidopsis thaliana plants in parallel over time.
Reproduction assets foundThe paper's Python image analysis pipeline (Digital phenotyper) for quantifying bioluminescent bacterial infection in Arabidopsis is explicitly and publicly deposited by the authors on GitHub.Code · publiccsv file and an overlayed image (.png file) of the RGB and CCD image was created for visual inspection. The pipeline features an environment file in which the different parameters can be adjusted to optimise the pipeline for other setups. All available parameters, code and instructions for this pipeline are provided on GitHub ( https://github.com/MolPlantPathology/Digital_phenotyper ).
2.3
Digital Phenotyping Quantifies Disease Severity at Different Stages of Infection
To confirm the validity of our method, we benchmarked our digital phenotyping pipeline against other well‐established methods. To do so, we performed spray inoculations of Xcc8004 Δ xopAC Tn 7:lux on three Arabidopsis genotypeOpen asset ↗MolPlantPathology/Digital_phenotyperlines:101-107Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Tomatoes are considered one of the most valuable vegetables around the world due to their usage and minimal harvesting period. However, effective harvesting still remains a major issue because tomatoes are easily susceptible to weather conditions and other types of attacks. Thus, numerous research studies have been introduced based on deep learning models for the efficient classification of tomato leaf disease. However, the usage of a single architecture does not provide the best results due to the limited computational ability and classification complexity. Thus, this research used Transductive Long Short-Term Memory (T-LSTM) with an attention mechanism. The attention mechanism introduced in T-LSTM has the ability to focus on various parts of the image sequence. Transductive learning exploits the specific characteristics of the training instances to make accurate predictions. This can involve leveraging the relationships and patterns observed within the dataset. The T-LSTM is based on the transductive learning approach and the scaled dot product attention evaluates the weights of each step based on the hidden state and image patches which helps in effective classification. The data was gathered from the PlantVillage dataset and the pre-processing was conducted based on image resizing, color enhancement, and data augmentation. These outputs were then processed in the segmentation stage where the U-Net architecture was applied. After segmentation, VGG-16 architecture was used for feature extraction and the classification was done through the proposed T-LSTM with an attention mechanism. The experimental outcome shows that the proposed classifier achieved an accuracy of 99.98% which is comparably better than existing convolutional neural network models with transfer learning and IBSA-NET.
Why it matches plant phenotyping methodsトマト葉の病害状態を画像から推定する分類・セグメンテーション手法を提案し、前処理、U-Net、特徴抽出、T-LSTM分類、比較評価までが中心であるため、植物病害フェノタイピング手法として含める。
abstractThese outputs were then processed in the segmentation stage where the U-Net architecture was applied.
Reproduction assets foundThe paper uses three public Kaggle tomato leaf image datasets: the PlantVillage tomato leaf dataset as the primary training/evaluation data, and two additional Kaggle image datasets for the independent real-time analysis. No author analysis code or trained model checkpoint is reported as publicly available.Dataset · publicDataset . Available online at: https://www.kaggle.com/datasets/charuchaudhry/plantvillage-tomato-leaf-dataset (Accessed July 10, 2024 ).Open asset ↗Kaggle · charuchaudhry/plantvillage-tomato-leaf-datasetlines:720-807Dataset · publicFigures 11 , 12 show the collected real-time images 1 ( https://www.kaggle.com/datasets/ashishmotwani/tomato/data ) and 2 ( https://www.kaggle.com/datasets/farukalam/tomato-leaf-diseases-detection-computer-vision ) for the independent analysis.Open asset ↗Kaggle · ashishmotwani/tomatolines:526-638Dataset · publicFigures 11 , 12 show the collected real-time images 1 ( https://www.kaggle.com/datasets/ashishmotwani/tomato/data ) and 2 ( https://www.kaggle.com/datasets/farukalam/tomato-leaf-diseases-detection-computer-vision ) for the independent analysis.Open asset ↗Kaggle · farukalam/tomato-leaf-diseases-detection-computer-visionlines:526-638Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Crop field monitoring using unmanned aerial vehicles (UAVs) is one of the most important technologies for plant growth control in modern precision agriculture. One of the important and widely used tasks in field monitoring is plant stand counting. The accurate identification of plants in field images provides estimates of plant number per unit area, detects missing seedlings, and predicts crop yield. Current methods are based on the detection of plants in images obtained from UAVs by means of computer vision algorithms and deep learning neural networks. These approaches depend on image spatial resolution and the quality of plant markup. The performance of automatic plant detection may affect the efficiency of downstream analysis of a field cropping pattern. In the present work, a method is presented for detecting the plants of five species in images acquired via a UAV on the basis of image segmentation by deep learning algorithms (convolutional neural networks). Twelve orthomosaics were collected and marked at several sites in Russia to train and test the neural network algorithms. Additionally, 17 existing datasets of various spatial resolutions and markup quality levels from the Roboflow service were used to extend training image sets. Finally, we compared several texture features between manually evaluated and neural-network-estimated plant masks. It was demonstrated that adding images to the training sample (even those of lower resolution and markup quality) improves plant stand counting significantly. The work indicates how the accuracy of plant detection in field images may affect their cropping pattern evaluation by means of texture characteristics. For some of the characteristics (GLCM mean, GLRM long run, GLRM run ratio) the estimates between images marked manually and automatically are close. For others, the differences are large and may lead to erroneous conclusions about the properties of field cropping patterns. Nonetheless, overall, plant detection algorithms with a higher accuracy show better agreement with the estimates of texture parameters obtained from manually marked images.
Why it matches plant phenotyping methodsUAV画像から植物個体をセグメンテーションし、株数・欠株などの植物状態を推定する画像解析手法を開発・評価しており、手法が研究の中心です。
abstractIn the present work, a method is presented for detecting the plants of five species in images acquired via a UAV on the basis of image segmentation by deep learning algorithms (convolutional neural networks).
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/jimaging11010028/s1 , “Supplementary Material.pdf” contains the following Supplementary Materials: Table S1. The field location of the crop image dataset from Russia (2019–2023); Table S2. Public datasets from Roboflow used for the analysis (accessed on 25 November 2023); Table S3. The row spacing (for different crops) used in the work to mark up images from the additional datasets (not ours); Table S4. Description of the ResNet neural network architectures for models RN18, RN34, and RN50; Table S5. Description of the texture characteristics; Table S6. Estimates of the four texture characteristicsOpen asset ↗lines:344-359Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Abstract Global climate change has driven breeding programs to develop abiotic stress‐resilient plant varieties. Traditionally, assessing drought resilience involves labor‐intensive and time‐consuming processes. This study used an unmanned aerial system (UAS) to predict key phenotyping traits in maize ( Zea mays L.) and monitor plant response to drought during the crop cycle. We grew transgenic maize hybrids in two trials, one irrigated and another subjected to drought stress, and used a drone equipped with red–green–blue (RGB) and multispectral sensors to capture images of the plots over time. Machine learning models and various prediction scenarios revealed significant correlations between vegetation indices over time. Interestingly, the RGB sensor outperformed the multispectral sensor in trait prediction. Prediction accuracy across scenarios with untested genotypes and environments ranged from 0.40 to 0.70 for grain yield, 0.43 to 0.69 for days to anthesis, 0.51 to 0.67 for days to silking, and 0.35 to 0.57 for plant height. Ridge and random forest models consistently delivered the most accurate predictions across traits and environments. The vegetation indices normalized green–red difference index, VARI, and RCC also effectively predicted and captured the plant response to drought. This study highlights the value of UAS phenotyping as a practical tool for assessing abiotic stress due to its straightforward implementation.
Why it matches plant phenotyping methodsUASによるRGB・マルチスペクトル画像と機械学習で、作物形質および干ばつ応答を予測するフェノタイピング手法を、複数環境・遺伝子型で検証しているため。
abstractThis study used an unmanned aerial system (UAS) to predict key phenotyping traits in maize ( Zea mays L.) and monitor plant response to drought during the crop cycle.
Reproduction assets foundThe paper's data availability statement says all codes and datasets (phenomic prediction scripts, folder 'Phenomic prediction', and described datasets) are publicly available at the authors' GCCRC publications page and on Dryad (doi:10.5061/dryad.0zpc8677b).Code · public14 of 16 PEREIRA ET AL.
in this work to perform phenomic prediction for all the eight
models and the four cross-validation scenarios were given as
examples in the folder “Phenomic prediction.” All the codes
and the datasets described are available at https://www.gccrc.unicamp.br/publications/ and https://doi.org/10.5061/dryad.0zpc8677b.O RC I D
HelcioDuartePereira https://orcid.org/0000-0002-2837-9396
Juliana Vieira Almeida Nonato https://orcid.org/0000-0003-4448-4652
Rafaela CarolineRangni MoltocaroDuarte https://orcid.org/0000-0003-2622-3758
Isabel Rodrigues Gerhardt https://orcid.org/0000-0003-1397-0199
RicardoAuOpen asset ↗GCCRCpdf-raw-page:14 lines:1-75Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
The evaluation of fruit genetic resources regarding a resistance to pathogens is an essential basis for subsequent selection in fruit breeding. Both genetic analysis and phenotyping of defined traits are important tools and provide decision data in the evaluation process. However, the phenotyping of plants is often carried out 'by hand' and remains the bottleneck in fruit breeding and fruit growing. The development of a digital and UAV (unmanned aerial vehicle)-based phenotyping method for the assessment of genotype-specific susceptibility or resistance against diseases in orchards would significantly increase the efficiency of plant breeding. In this framework, a workflow for drone-based monitoring of pathogens in orchards was developed using the European pear rust ( Gymnosporangium sabinae ) as model pathogen. Pear rust is widespread in orchards and causes conspicuous, clearly visible, yellow to orange-colored disease symptoms. In this paper, we provide a dataset with expert-annotated high-resolution RGB images with pear rust symptoms. For data collection, ten UAV-flight campaigns were realized between 2021 and 2023 under various weather conditions and with different flight parameters in the experimental orchard of the Julius Kühn-Institute for Breeding Research on Fruit Crops in Dresden-Pillnitz (Germany). 1394 images were captured of different pear genotypes, including varieties, wild species and progeny from breeding. The dataset contains manually labelled images with a size of 768 × 768 pixels of leaves infected with pear rust at different stages of development, labelled as class GYMNSA, as well as background images without symptoms. Each leaf with pear rust symptoms was annotated with the drawing method by two points (bounding boxes) using the Computer Vision Annotation Tool (CVAT, v1.1.0) [1] and presented in YOLO 1.1 file format (.txt files). A total of 584 annotated images and 162 background images, organized into a training and validation set, are included in the GYMNSA dataset. This GYMNSA dataset can be used as a resource for researchers and developers working on drone-based plant disease monitoring systems.
Why it matches plant phenotyping methodsナシさび病の植物症状をUAV画像から検出するための注釈付きデータセットを提供しており、植物病害状態の画像ベース表現型取得・解析ワークフローが中心的です。
abstractThe development of a digital and UAV (unmanned aerial vehicle)-based phenotyping method for the assessment of genotype-specific susceptibility or resistance against diseases in orchards would significantly increase the efficiency of plant breeding.
Reproduction assets foundThe paper's GYMNSA dataset — annotated UAV RGB images of pear rust symptoms with YOLO labels — is publicly deposited on Mendeley Data under DOI 10.17632/44kjgc4gkc.1, directly reproducing the paper's phenotyping measurements.Dataset · publicl orchard of the Julius Kühn-Institute (JKI - Federal Research Centre for Cultivated Plants) at the Institute for Breeding Research on Fruit Crops located in Dresden-Pillnitz (Germany) [51°00ʹ01"N 13°53ʹ12"E].
Data accessibility
Repository name: Mendeley Data
Data identification number: 10.17632/44kjgc4gkc.1
Direct URL to data: https://data.mendeley.com/datasets/44kjgc4gkc/1
1.
Value of the Data
•
These data were collected on an approximately 1.6 ha experimental field with over 1000 different pear genotypes (breeding material and genetic resources of pear varieties and species) and presents a wide spectrum of phenotypic characteristics of pear rust infections at different stages of developmeOpen asset ↗Mendeley Data · 10.17632/44kjgc4gkc.1lines:43-69Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
BACKGROUND: The reconstruction of 3-dimensional (3D) plant models can offer advantages over traditional 2-dimensional approaches by more accurately capturing the complex structure and characteristics of different crops. Conventional 3D reconstruction techniques often produce sparse or noisy representations of plants using software or are expensive to capture in hardware. Recently, view synthesis models have been developed that can generate detailed 3D scenes, and even 3D models, from only RGB images and camera poses. These models offer unparalleled accuracy but are currently data hungry, requiring large numbers of views with very accurate camera calibration. RESULTS: In this study, we present a view synthesis dataset comprising 20 individual wheat plants captured across 6 different time frames over a 15-week growth period. We develop a camera capture system using 2 robotic arms combined with a turntable, controlled by a re-deployable and flexible image capture framework. We trained each plant instance using two recent view synthesis models: 3D Gaussian splatting (3DGS) and neural radiance fields (NeRF). Our results show that both 3DGS and NeRF produce high-fidelity reconstructed images of a plant subject from views not captured in the initial training sets. We also show that these approaches can be used to generate accurate 3D representations of these plants as point clouds, with 0.74-mm and 1.43-mm average accuracy compared with a handheld scanner for 3DGS and NeRF, respectively. CONCLUSION: We believe that these new methods will be transformative in the field of 3D plant phenotyping, plant reconstruction, and active vision. To further this cause, we release all robot configuration and control software, alongside our extensive multiview dataset. We also release all scripts necessary to train both 3DGS and NeRF, all trained models data, and final 3D point cloud representations. Our dataset can be accessed via https://plantimages.nottingham.ac.uk/ or https://https://doi.org/10.5524/102661. Our software can be accessed via https://github.com/Lewis-Stuart-11/3D-Plant-View-Synthesis.
Why it matches plant phenotyping methods3D植物表現型取得のための撮影システム、再構成手法、データセットを開発し、スキャナとの精度比較で検証しているため、方法が中心的である。
abstractWe develop a camera capture system using 2 robotic arms combined with a turntable, controlled by a re-deployable and flexible image capture framework.
Reproduction assets foundThe paper releases its wheat plant multiview image dataset (via plantimages.nottingham.ac.uk and GigaDB DOI 10.5524/102661), its authors' analysis/capture codebase on GitHub (3D-Plant-View-Synthesis), a Software Heritage archive of that code, and a DOME-ML registry annotation. All are paper-specific, public, and have作者Code · publicruction output across all plants. We hope that our study will provide opportunities for researchers exploring new and improved 3D phenotyping algorithms, 3D reconstruction and view synthesis research, and active vision systems.
Availability of Source Code and Requirements
Project name: 3D Plant View Synthesis:
Project homepage: https://github.com/Lewis-Stuart-11/3D-Plant-View-Synthesis [ 13 ]
Operating system(s): Windows, Ubuntu
Programming language: Python (>=3.8)
License: Apache 2.0
Any restrictions to use by nonacademics: None
Our code has also been archived in Software Heritage [ 66 ]. Functionality, such as Robotic View Capturing, 3DGS to Point Cloud, and our UR5 Configs files, are storOpen asset ↗GitHub · Lewis-Stuart-11/3D-Plant-View-Synthesislines:663-695Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Radishes, which are common root vegetables, are rich in vitamins and minerals, and contain low calories. This vegetable is known for its rapid growth. Nevertheless, the variety of leaf diseases where leaves get affected by various bacterial and fungal diseases can hinder the healthy growth of radish. Furthermore, there is a high risk of inaccurate identification of diseases if the farmers try to use traditional methods in recognizing these diseases. With the purpose of precise identification of radish leaf diseases for the finest growth of this vegetable, total of 2801 images of the radish leaves are collected from vegetable field in Bangladesh. The collected dataset includes comprehensive images of healthy leaves as well as four types of leaf affected by various diseases such as Black Leaf Spot, Downey Mildew, Flea Beetle and Mosaic. Utilizing this robust dataset, deep learning models can be trained to identify the leaf diseases which helps to detect the diseases in order to reduce the harm of the cultivation of radish. By identifying the diseases on radish leaves accurat-ely and maintaining healthy production of radish, this dataset contributes to the broader sustainability in the agricultural sector.
Why it matches plant phenotyping methodsダイコン葉の病害状態を画像で取得したデータセットの構築が中心であり、植物病害フェノタイピング用の再利用可能な資源に該当する。
abstracttotal of 2801 images of the radish leaves are collected from vegetable field in Bangladesh
Reproduction assets foundThe paper is a Data in Brief article describing a public Mendeley Data repository of 2801 smartphone images of radish leaves (healthy plus four disease classes) collected in Bangladesh, which is the paper's own phenotyping image dataset and is directly accessible.Dataset · publicortant role for classifying the radish plant healthy and unhealthy leaves.
Data source location
1. Vegetable field of Kathalkandi, Nasirnagar, Brahmanbaria, Bangladesh (latitude: 24.1915°, longitude: 91.1826°)
Data accessibility
Repository name: Mendeley Data
Data identification number: 10.17632/s973cz2jcd.1
Direct URL to data: https://data.mendeley.com/datasets/s973cz2jcd/1
1
Value of the Data
•
The dataset containing several classes of radish leaves where each class clearly representing the unhealthy leaf as well as healthy leaf. All the images are captured with high resolution that ensuing the high-quality of leaves images, helps to recognize the pattens of diseases.
•
The dataset presentOpen asset ↗Mendeley Data · 10.17632/s973cz2jcd.1lines:1-50Code / dataset availability confirmedCrossref · Europe PMC · checked 15 Sept 2026
Abstract The rice plant is one of the most significant crops in the world, and it suffers from various diseases. The traditional methods for rice disease detection are complex and time-consuming, mainly depending on the expert’s experience. The explosive growth in image processing, computer vision, and deep learning techniques provides effective and innovative agriculture solutions for automatically detecting and classifying these diseases. Moreover, more information can be extracted from the input images due to different feature extraction techniques. This paper proposes a new system for detecting and classifying rice plant leaf diseases by fusing different features, including color texture with Local Binary Pattern (LBP) and color features with Color Correlogram (CC). The proposed system consists of five stages. First, input images acquire RGB images of rice plants. Second, image preprocessing applies data augmentation to solve imbalanced problems, and logarithmic transformation enhancement to handle illumination problems has been applied. Third, the features extraction stage is responsible for extracting color features using CC and color texture features using multi-level multi-channel local binary pattern (MCLBP). Fourth, the feature fusion stage provides complementary and discriminative information by concatenating the two types of features. Finally, the rice image classification stage has been applied using a one-against-all support vector machine (SVM). The proposed system has been evaluated on three benchmark datasets with six classes: Blast (BL), Bacterial Leaf Blight (BLB), Brown Spot (BS), Tungro (TU), Sheath Blight (SB), and Leaf Smut (LS) have been used. Rice Leaf Diseases First Dataset, Second Dataset, and Third Dataset achieved maximum accuracy of 99.53%, 99.4%, and 99.14%, respectively, with processing time from $$100(\pm 17)ms$$ . Hence, the proposed system has achieved promising results compared to other state-of-the-art approaches.
Why it matches plant phenotyping methodsイネ葉の病徴を画像から検出・分類する特徴抽出および分類システムが研究の中心であり、植物の病害状態を直接推定するため、植物フェノタイピング手法に該当する。
abstractThis paper proposes a new system for detecting and classifying rice plant leaf diseases by fusing different features, including color texture with Local Binary Pattern (LBP) and color features with Color Correlogram (CC).
Reproduction assets foundThe paper evaluates its rice leaf disease classification system on three publicly available image datasets, each with explicit public URLs in the Data Availability statement. No author analysis code or trained models are shared.Dataset · publichors have read and agreed to the published version of the manuscript.
Funding
Open access funding provided by The Science, Technology & Innovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB).
Data availibility
This research study was tested using three datasets which are publicly available in: https://data.mendeley.com/datasets/fwcj7stb8r/1 . https://www.kaggle.com/datasets/rajeshbhattacharjee/rice-diseases-using-cnn-and-svm . https://data.mendeley.com/datasets/dwtn3c6w6p/1 .
Declarations
Competing interests
Te authors declare no competing interests.
Footnotes
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in publishedOpen asset ↗fwcj7stb8rlines:2657-2679Dataset · publicof the manuscript.
Funding
Open access funding provided by The Science, Technology & Innovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB).
Data availibility
This research study was tested using three datasets which are publicly available in: https://data.mendeley.com/datasets/fwcj7stb8r/1 . https://www.kaggle.com/datasets/rajeshbhattacharjee/rice-diseases-using-cnn-and-svm . https://data.mendeley.com/datasets/dwtn3c6w6p/1 .
Declarations
Competing interests
Te authors declare no competing interests.
Footnotes
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
1.Open asset ↗Kaggle · rajeshbhattacharjee/rice-diseases-using-cnn-and-svmlines:2657-2679Dataset · publicInnovation Funding Authority (STDF) in cooperation with The Egyptian Knowledge Bank (EKB).
Data availibility
This research study was tested using three datasets which are publicly available in: https://data.mendeley.com/datasets/fwcj7stb8r/1 . https://www.kaggle.com/datasets/rajeshbhattacharjee/rice-diseases-using-cnn-and-svm . https://data.mendeley.com/datasets/dwtn3c6w6p/1 .
Declarations
Competing interests
Te authors declare no competing interests.
Footnotes
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
References
1. Viana, C. M., Freire, D., Abrantes, P., Rocha, J. & Pereira, P. Agricultural land syOpen asset ↗dwtn3c6w6plines:2657-2679Code / dataset availability confirmedOpenAlex · Crossref · checked 6 Sept 2026
Time to maturity and yield are important traits for highbush blueberry (Vaccinium corymbosum) breeding. Proper determination of the time to maturity of blueberry varieties and breeding lines informs the harvest window, ensuring that the fruits are harvested at optimum maturity and quality. On the other hand, high-yielding crops bring in high profits per acre of planting. Harvesting and quantifying the yield for each blueberry breeding accession are labor-intensive and impractical. Instead, visual ratings as an estimation of yield are often used as a faster way to quantify the yield, which is categorical and subjective. In this study, we developed and shared a high-throughput phenotyping method using neural networks to predict blueberry time to maturity and to provide a proxy for yield, overcoming the labor constraints of obtaining high-frequency data. We aim to facilitate further research in computer vision and precision agriculture by publishing the labeled image dataset and the trained model. In this research, true-color images of blueberry bushes were collected, annotated, and used to train a deep neural network object detection model [You Only Look Once (YOLOv11)] to detect mature and immature berries. Different versions of YOLOv11 were used, including nano, small, and medium, which had similar performance, while the medium version had slightly higher metrics. The YOLOv11m model shows strong performance for the mature berry class, with a precision of 0.90 and an F1 score of 0.90. The precision and recall for detecting immature berries were 0.81 and 0.79. The model was tested on 10 blueberry bushes by hand harvesting and weighing blueberries. The results showed that the model detects approximately 25% of the berries on the bushes, and the correlation coefficients between model-detected and hand-harvested traits were 0.66, 0.86, and 0.72 for mature fruit count, immature fruit count, and mature ratio, respectively. The model applied to 91 blueberry advance selections and categorized them into groups with diverse levels of maturity and productivity using principal component analysis (PCA). These results inform the harvest window and yield of these breeding lines with precision and objectivity through berry classification and quantification. This model will be helpful for blueberry breeders, enabling more efficient selection, and for growers, helping them accurately estimate optimal harvest windows. This open-source tool can potentially enhance research capabilities and agricultural productivity.
Why it matches plant phenotyping methodsブルーベリーの成熟度・収量 proxy を画像とニューラルネットワークで推定する高スループット表現型計測法を開発・検証し、モデルとラベル付きデータセットを共有しているため、方法が研究の中心である。
abstractwe developed and shared a high-throughput phenotyping method using neural networks to predict blueberry time to maturity and to provide a proxy for yield
Reproduction assets foundThe paper publishes its labeled blueberry image dataset on Zenodo (record 14014858) and its trained YOLOv11-based blueberry fruit counting model/code on GitHub (jeromemaleski/blueberry), both directly supporting the paper's phenotyping measurements and analysis.Dataset · public32. Zhang, J. Blueberry Images and Labels for YOLO Model Training. Zenodo. 2024. Available online: https://zenodo.org/records/Open asset ↗zenodopdf-page:14 lines:1-36Code / dataset availability confirmedEurope PMC · OpenAlex · checked 15 Sept 2026
Common beanAerial / UAVField / plotLiDAR / point cloudRGB / grayscaleWhole plant / canopy / plot / fieldCountingMorphology / geometry measurementGrowth / time-series analysisGrowth / development / phenology
Substantial effort has been made in manually tracking plant maturity and to measure early-stage plant density and crop height in experimental fields. In this study, RGB drone imagery and deep learning (DL) approaches are explored to measure relative maturity (RM), stand count (SC), and plant height (PH), potentially offering higher throughput, accuracy, and cost-effectiveness than traditional methods. A time series of drone images was utilized to estimate dry bean RM employing a hybrid convolutional neural network (CNN) and long short-term memory (LSTM) model. For early-stage SC assessment, Faster RCNN object detection algorithm was evaluated. Flight frequencies, image resolution, and data augmentation techniques were investigated to enhance DL model performance. PH was obtained using a quantile method from digital surface model (DSM) and point cloud (PC) data sources. The CNN-LSTM model showed high accuracy in RM prediction across various conditions, outperforming traditional image preprocessing approaches. The inclusion of growing degree days (GDD) data improved the model's performance under specific environmental stresses. The Faster R-CNN model effectively identified early-stage bean plants, demonstrating superior accuracy over traditional methods and consistency across different flight altitudes. For PH estimation, moderate correlations with ground-truth data were observed across both datasets analyzed. The choice between PC and DSM source data may depend on specific environmental and flight conditions. Overall, the CNN-LSTM and Faster R-CNN models proved more effective than conventional techniques in quantifying RM and SC. The subtraction method proposed for estimating PH without accurate ground elevation data yielded results comparable to the difference-based method. Additionally, the pipeline and open-source software developed hold potential to significantly benefit the phenotyping community.
Why it matches plant phenotyping methodsドローン画像と深層学習を用いて成熟度、株数、草丈を推定する手法を開発・評価し、パイプラインとオープンソースソフトウェアも提示しており、植物表現型取得が研究の中心である。
abstractIn this study, RGB drone imagery and deep learning (DL) approaches are explored to measure relative maturity (RM), stand count (SC), and plant height (PH)
Reproduction assets foundThe paper explicitly states that all R/Python analysis code, apps, and the complete datasets (orthomosaics, shapefiles, ground notes, clipped plots) are publicly available via the authors' GitHub organization and three Zenodo deposits for RM, SC, and PH.Dataset · publicof the manuscript.
Competing interests: The authors declare that they have no competing interests.
Data Availability
Developed software and analysis are available in the GitHub repositories at https://github.com/msudrybeanbreeding and datasets can be download at Zenodo deposit page ( https://zenodo.org/ ) using the links to RM: https://doi.org/10.5281/zenodo.7922565; SC: https://doi.org/10.5281/zenodo.7922584; and PH: https://doi.org/10.5281/zenodo.7922589 .
Supplementary Materials
Supplementary 1
Figs. S1 to S14
Tables S1 and S2
Data files S1 to 21
References
1.
Uebersax
MA , Cichy
KA , Gomez
FE , Porch
TG , Heitholt
J , Osorno
JM , Kamfwa
K , Snapp
SS , Bales
S
.
Dry beans ( Phaseolus vuOpen asset ↗zenodo · 10.5281/zenodo.7922565lines:677-730Dataset · publicauthors declare that they have no competing interests.
Data Availability
Developed software and analysis are available in the GitHub repositories at https://github.com/msudrybeanbreeding and datasets can be download at Zenodo deposit page ( https://zenodo.org/ ) using the links to RM: https://doi.org/10.5281/zenodo.7922565; SC: https://doi.org/10.5281/zenodo.7922584; and PH: https://doi.org/10.5281/zenodo.7922589 .
Supplementary Materials
Supplementary 1
Figs. S1 to S14
Tables S1 and S2
Data files S1 to 21
References
1.
Uebersax
MA , Cichy
KA , Gomez
FE , Porch
TG , Heitholt
J , Osorno
JM , Kamfwa
K , Snapp
SS , Bales
S
.
Dry beans ( Phaseolus vulgaris L.) as a vital component of sustainabOpen asset ↗zenodo · 10.5281/zenodo.7922584lines:677-730Dataset · publicrests.
Data Availability
Developed software and analysis are available in the GitHub repositories at https://github.com/msudrybeanbreeding and datasets can be download at Zenodo deposit page ( https://zenodo.org/ ) using the links to RM: https://doi.org/10.5281/zenodo.7922565; SC: https://doi.org/10.5281/zenodo.7922584; and PH: https://doi.org/10.5281/zenodo.7922589 .
Supplementary Materials
Supplementary 1
Figs. S1 to S14
Tables S1 and S2
Data files S1 to 21
References
1.
Uebersax
MA , Cichy
KA , Gomez
FE , Porch
TG , Heitholt
J , Osorno
JM , Kamfwa
K , Snapp
SS , Bales
S
.
Dry beans ( Phaseolus vulgaris L.) as a vital component of sustainable agriculture and food security—A review
. LeguOpen asset ↗zenodo · 10.5281/zenodo.7922589lines:677-730Code · publics from each individual breeding plot were extracted from the time series of images (6 and 9 flights date), and the RM was estimated using an optimized threshold value of 0.06. To perform the VI extractions from each breeding plot in the field, an open-source Streamlit app in Python was implemented and can be accessed online at: https://msudrybeanbreeding-vegetation-index--vi-extractions-v0-3-9knpzt.streamlit.app/ . Additionally, to accommodate user preferences, an R script is available to perform VI extractions analysis (Data S7 ).
SC DL model
The SC pipeline deployed in this study comprised 6 distinct steps, starting from the raw images and annotations, and ending with the final SC predictiOpen asset ↗lines:139-147Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 14 Sept 2026
Rice tiller angle is a key agronomic trait that regulates plant architecture and plays a critical role in determining rice yield. Given that tiller angle is regulated by multiple genes, it is important to identify quantitative trait loci (QTL) associated with tiller angle. Recently, with the advancement of imaging technology for plant phenotyping, it has become possible to quickly and accurately measure agronomic traits of breeding populations. In this study, we extracted tiller angle and various image-based parameters from Red-Green-Blue (RGB) images of a recombinant inbred line (RIL) population derived from a cross between Milyang23 (Indica) and Giho (Japonica). Correlations among the obtained data were analyzed, and through dynamic QTL mapping, five major QTLs (qTA1, qTA1-1, qTA2, qTA2-1, and qTA9) related to tiller angle were detected on chromosomes 1, 2, and 9. Among them, 26 candidate genes related to auxin signaling and plant growth, including the TAC1 (Tiller Angle Control 1) gene, were identified in qTA9 (RM257-STS09048). These results demonstrate the potential of image-based phenotyping to overcome the limitations of traditional manual measurements in crop structure research. Furthermore, the identification of key QTLs and candidate genes related to tiller angle provides valuable genetic insights for the development of high-yielding varieties through crop morphology control.
Why it matches plant phenotyping methodsRGB画像からイネの分げつ角度と画像パラメータを抽出する画像ベース表現型解析を、育種集団で実質的に適用・評価しており、表現型取得法が中心です。
abstractRecently, with the advancement of imaging technology for plant phenotyping, it has become possible to quickly and accurately measure agronomic traits of breeding populations.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/plants13233288/s1 , Figure S1: Quantitative trait loci (QTL) analysis associated with tiller angle in rice using RIL population; Figure S2: QTL distribution for tiller angle across different development stages.Open asset ↗lines:89-100Code / dataset availability confirmedOpenAlex · Europe PMC · checked 7 Sept 2026
Effective lettuce cultivation requires precise monitoring of growth characteristics, quality assessment, and optimal harvest timing. In a recent study, a deep learning model based on multimodal data fusion was developed to estimate lettuce phenotypic traits accurately. A dual-modal network combining RGB and depth images was designed using an open lettuce dataset. The network incorporated both a feature correction module and a feature fusion module, significantly enhancing the performance in object detection, segmentation, and trait estimation. The model demonstrated high accuracy in estimating key traits, including fresh weight (fw), dry weight (dw), plant height (h), canopy diameter (d), and leaf area (la), achieving an R2 of 0.9732 for fresh weight. Robustness and accuracy were further validated through 5-fold cross-validation, offering a promising approach for future crop phenotyping.
Why it matches plant phenotyping methodsRGB・深度画像を融合した深層学習によるレタス形質推定手法を開発し、交差検証で性能評価しており、フェノタイピング手法が中心である。
abstracta deep learning model based on multimodal data fusion was developed to estimate lettuce phenotypic traits accurately
Reproduction assets foundThe paper's RGB-D lettuce images and trait measurements come from the publicly available Third Autonomous Greenhouse Challenge dataset deposited at 4TU.ResearchData, with an explicit availability statement and URL matching an allowed URL. No author analysis code or trained model is disclosed.Dataset · publicThis study used the Third Autonomous Greenhouse Challenge: Online Challenge Lettuce Images dataset publicly available at 4TU.ResearchData [ 36 ].Open asset ↗4TU.ResearchDatalines:819-832Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Abstract Background: Late and early leaf spot in peanuts is a foliar disease contributing to a significant amount of lost yield globally. Peanut breeding programs frequently focus on developing disease-resistant peanut genotypes. However, existing phenotyping protocols employ subjective rating scales, performed by human raters, who determine the severity of leaf spot infection. The objective of this study was to develop an objective end-to-end pipeline that can serve to replace an expert human scorer in the field. This was accomplished using image capture protocols and segmentation neural networks that extracted lesion areas from plot-level images to determine an appropriate rating for infection severity. Results: The pipeline incorporated a neural network that accurately determined the infected leaf surface area and identified dead leaves from plot-level cellphone imagery. Image processing algorithms then convert these labels into quality metrics that can efficiently score these images based on infected versus non-infected area. The pipeline was evaluated using field data from plots with varying leaf spot severity, creating a dataset of thousands of images that spanned conventional visual severity scores ranging from 1-9. These predictions were based on the amount of infected leaf area and the presence of defoliated leaves in the surrounding area. We were able to demonstrate automated scoring, as compared to exprt visual scoring, with a root mean square error of 0.996 visual scores, on individual images (one image per plot), and 0.800 visual scores when three images were captured of each plot. Conclusion: Results indicated that the model and image processing pipeline can serve as an alternative to human scoring. Eliminating human subjectivity for the scoring protocols will allow non-experts to collect scores and may enable drone-based data collection. This could reduce the time needed to obtain new lines or identify new genes responsible for leaf spot resistance in peanut.
Why it matches plant phenotyping methods落花生の葉斑病重症度という植物状態を、画像取得・セグメンテーション・画像処理で自動推定するパイプラインの開発と評価が中心である。
abstractThe objective of this study was to develop an objective end-to-end pipeline that can serve to replace an expert human scorer in the field.
Reproduction assets foundThe paper explicitly states that the complete dataset of RGB images and semantic segmentation labels, generated/analysed during the study, is publicly available in the authors' GitHub repository (Automated Leaf Spot Scoring), which directly reproduces this paper's peanut leaf spot phenotyping images and annotations.Dataset · publicThe datasets generated and/or analysed during the current study are available in the Automated
Leaf Spot Scoring GitHub repository:
https://github.ncsu.edu/jclarse2/AutomatedLeafSpotScoringOpen asset ↗AutomatedLeafSpotScoringpdf-page:19 lines:1-44Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Abstract BerryPortraits (Phenotyping of Ripening Traits) is open source Python-based image-analysis software that rapidly detects and segments berries and extracts morphometric data on fruit quality traits such as berry color, size, shape, and uniformity. Utilizing the YOLOv8 framework and community-developed, actively-maintained Python libraries such as OpenCV, BerryPortraits software was trained on 512 postharvest images (taken under controlled lighting conditions) of phenotypically diverse cranberry populations ( Vaccinium macrocarpon Ait.) from the two largest public cranberry breeding programs in the U.S. The implementation of CIELAB, an intuitive and perceptually uniform color space, enables differentiation between berry color and berry brightness, which are confounded in classic RGB color channel measurements. Furthermore, computer vision enables precise and quantifiable color phenotyping, thus facilitating inclusion of researchers and data analysts with color vision deficiency. BerryPortraits is a phenotyping tool for researchers in plant breeding, plant genetics, horticulture, food science, plant physiology, plant pathology, and related fields. BerryPortraits has strong potential applications for other specialty crops such as blueberry, lingonberry, caneberry, grape, and more. As an open source phenotyping tool based on widely-used python libraries, BerryPortraits allows anyone to use, fork, modify, optimize, and embed this software into other tools or pipelines.
Why it matches plant phenotyping methods植物果実の色・サイズ・形状・均一性を画像から抽出するオープンソースの表現型解析ソフトウェアを開発しており、植物フェノタイピング手法が研究の中心である。
abstractBerryPortraits (Phenotyping of Ripening Traits) is open source Python-based image-analysis software that rapidly detects and segments berries and extracts morphometric data on fruit quality traits such as berry color, size, shape, and uniformity.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicHere we present BerryPortraits: Phenotyping Of Ripening Traits [‘with Rapid Automated Imaging Tools and Software’, for those disinclined towards brevity]) ( https://github.com/Breeding-Insight/BerryPortraits/ )Open asset ↗Breeding-Insight/BerryPortraitslines:100-105Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Background Quantitative disease resistance (QR) is a complex, dynamic trait that is most reliably quantified in field-grown crops. Traditional disease assessments offer limited potential to disentangle the contributions of different components to overall QR at critical crop developmental stages. Yet, a better functional understanding of QR could greatly support a more targeted, knowledge-based selection for QR and improve predictions of seasonal epidemics. Image-based approaches together with advanced image processing methodologies recently emerged as valuable tools to standardize relevant disease assessments, increase measurement throughput, and describe diseases along multiple dimensions. Results We present a simple, affordable, and easy-to-operate imaging set-up and imaging procedure for in-field acquisition of wheat leaf image sequences. The development of Septoria tritici blotch and leaf rusts was monitored over time via robust methods for symptom detection and segmentation, spatial alignment of images, symptom tracking, and leaf- and symptom characterization. The average accuracy of the spatial alignment of images in a time series was approximately 5 pixels (~ 0.15 mm). Leaf-level symptom counts as well as individual symptom property measurements revealed stable patterns over time that were generally in excellent agreement with visual impressions. This provided strong evidence for the robustness of the methodology to variability typically inherent in field data. Contrasting patterns in the number of lesions resulting from separate infection events and lesion expansion dynamics were observed across wheat genotypes. The number of separate infection events and average lesion size contributed to different degrees to overall disease intensity, possibly indicating distinct and complementary mechanisms of QR. Conclusions The proposed methodology enables rapid, non-destructive, and reproducible measurement of several key epidemiological parameters under field conditions. Such data can support decomposition and functional understanding of QR as well as the parameterization, fine-tuning, and validation of epidemiological models. Details of pathogenesis can translate into specific symptom phenotypes resolvable using time series of high-resolution RGB images, which may improve biological understanding of plant-pathogen interactions as well as interactions in disease complexes.
Why it matches plant phenotyping methods圃場での植物病徴を画像から取得・追跡・定量する撮像および画像解析手法を開発・検証しており、植物表現型測定が中心である。
abstractWe present a simple, affordable, and easy-to-operate imaging set-up and imaging procedure for in-field acquisition of wheat leaf image sequences.
Reproduction assets foundThe paper explicitly states that all image-processing/analysis code is publicly available on the authors' GitHub repository, and that a sample dataset plus the trained reference mark detection model are downloadable from the ETH Research Collection. Both are paper-specific, public, and actionable.Code · publicAll code related to the processing of image time series and leaf- and lesion-level trait extraction is available from https://github.com/and-jonas/sympathique-wheat for documentation.Open asset ↗and-jonas/sympathique-wheatlines:98-107Dataset · publicA sample data set and the trained reference mark detection model can be downloaded from ETH research collection at https://doi.org/10.3929/ethz-b-000659812 .Open asset ↗10.3929/ethz-b-000659812lines:98-107Code / dataset availability confirmedOpenAlex · Crossref · checked 8 Sept 2026
Computer vision techniques offer promising tools for disease detection in orchards and can enable effective phenotyping for the selection of resistant cultivars in breeding programmes and research. In this study, a digital phenotyping system for disease detection and monitoring was developed using drones, object detection and photogrammetry, focusing on European pear rust (Gymnosporangium sabinae) as a model pathogen. High-resolution RGB images from ten low-altitude drone flights were collected in 2021, 2022 and 2023. A total of 16,251 annotations of leaves with pear rust symptoms were created on 584 images using the Computer Vision Annotation Tool (CVAT). The YOLO algorithm was used for the automatic detection of symptoms. A novel photogrammetric approach using Agisoft’s Metashape Professional software ensured the accurate localisation of symptoms. The geographic information system software QGIS calculated the infestation intensity per tree based on the canopy areas. This drone-based phenotyping system shows promising results and could considerably simplify the tasks involved in fruit breeding research.
Why it matches plant phenotyping methodsドローン画像、物体検出、写真測量を統合し、ナシ樹のさび病症状を検出・局在化して樹体ごとの感染強度を推定するデジタル表現型解析システムの開発が中心である。
abstracta digital phenotyping system for disease detection and monitoring was developed using drones, object detection and photogrammetry
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the annotated UAV image dataset on Mendeley Data and the trained model, detection workflow, and Metashape loading script on figshare, both with public URLs matching allowed entries.Dataset · publicsource repository Mendeley Data (https://data.mendeley.com/datasets/44kjgc4gkc/1, accessed on 8Open asset ↗Mendeley Data · 44kjgc4gkc/1pdf-page:15 lines:1-67Code · publicThe model, the detection workflow with instructions and the script for
loading the detections into Agisoft’s Metashape are available in the open-source figshare repository
(https://doi.org/10.6084/m9.figshare.27225312.v2, accessed on 28 October 2024).Open asset ↗figshare · 10.6084/m9.figshare.27225312.v2pdf-page:15 lines:1-67Code / dataset availability confirmedOpenAlex · Europe PMC · bioRxiv · checked 13 Sept 2026
Abstract In recent years, the automation of genotyping has significantly enhanced the efficiency of genome-wide association studies. As a result, phenotyping rather than genotyping is now the rate-limiting step, especially in field experiments. For this reason, there is a strong need to further automate in-field phenotyping. Here we present a GWAS study on 194 field-grown accessions of lettuce ( Lactuca sativa ). These accessions were non-destructively phenotyped at two time points 15 days apart using an unmanned aerial vehicle. Our high throughput phenotyping approach integrates an RGB camera, a multispectral camera to measure the reflectance at 5 wavelengths (blue, green, red, red edge, near-infrared), and precise height estimation. We used the mean and other descriptives such as median, quantiles, minimum and maximum to quantify different aspects of color and height variation in lettuce from the drone images. Using this approach, we confirm several previously described QTLs, now in populations grown under field conditions, and identify several new QTLs for plant-height and color.
Why it matches plant phenotyping methodsドローン搭載RGB・マルチスペクトルカメラと高さ推定を統合した圃場フェノタイピング手法を開発・適用し、画像からレタスの色と草丈を定量化しているため、方法が研究の中心です。
abstractOur high throughput phenotyping approach integrates an RGB camera, a multispectral camera to measure the reflectance at 5 wavelengths (blue, green, red, red edge, near-infrared), and precise height estimation.
Reproduction assets foundThe paper explicitly states that analysis scripts are publicly available on GitHub (SnoekLab/Dijkhuizen_etal_2025_Drone) and that extended data (raw data, intermediate steps, figure data, weather data) is deposited at the Utrecht University repository DOI 10.24416/UU01-S5FCM9. Both are paper-specific, public, and verbiCode · publicScripts used for this study are available on github:
https://github.com/SnoekLab/Dijkhuizen_etal_2025_Drone.Open asset ↗SnoekLab/Dijkhuizen_etal_2025_Dronepdf-page:8 lines:1-120Dataset · publicExtended data available on https://doi.org/10.24416/UU01-S5FCM9. This includes all raw
data to reproduce results, all intermittent steps, the data required to generate all figures and
the weather data.Open asset ↗10.24416/UU01-S5FCM9pdf-page:8 lines:1-120Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 15 Sept 2026
BACKGROUND: graminoid crop cultivated mainly in the arid and semiarid regions of China for more than 7000 years. Its grain highly nutritious and is rich in starch, protein, essential vitamins such as carotenoids, folate, and minerals. To expand the utilisation of foxtail millet, efficient and precise methods for dynamic phenotyping of its growth stages are needed. Traditional foxtail millet monitoring methods have high labour costs and are inefficient and inaccurate, impeding the precise evaluation of foxtail millet genotypic variation. RESULTS: This study introduces a high-throughput imaging system (HIS) with advanced image processing techniques to enhance monitoring efficiency and data quality. The HIS can accurately extract a range of key growth feature parameters, such as plant height (PH), convex hull area (CHA), side projected area (SPA) and colour distribution, from foxtail millet images. Compared with traditional manual measurements, this HIS improved data quality and phenotyping of the key foxtail millet growth traits. High-throughput phenotyping combined with a genome-wide association study (GWAS) revealed genetic loci associated with dynamic growth traits, particularly plant height (PH), in foxtail millet. The loci were linked to genes involved in the gibberellic acid (GA) synthesis pathway related to PH. CONCLUSION: The HIS developed in this study enables the efficient and dynamic monitoring of foxtail millet phenotypic traits. It significantly improves the quality of data obtained for phenotyping key growth traits. The integration of high-throughput phenotyping with GWAS provides new insights into the genetic underpinnings of dynamic growth traits, particularly plant height, by identifying associated genetic loci in the GA synthesis pathway. This methodological advancement opens new avenues for the precise phenotyping and exploration of genetic resources in foxtail millet, potentially enhancing its utilisation.
Why it matches plant phenotyping methodsフォックステールミレットの生育形質を画像から抽出する高スループット画像システムと画像処理手法を開発・評価しており、表現型取得法が研究の中心である。
abstractThis study introduces a high-throughput imaging system (HIS) with advanced image processing techniques to enhance monitoring efficiency and data quality.
Reproduction assets foundThe paper's authors explicitly state that the source code of their foxtail millet image processing program (used to extract phenotypic i-traits such as PH, CHA, SPA, compactness indices, and colour pixel features) is publicly available on GitHub. The MDSi database URL is a general transcriptomic resource, not a paper-Code · publicmation about plant health and physiological responses.
The program was created using the OpenCV library within the Microsoft Visual Studio (C++) environment. The extracted phenotypic data were converted to CSV file format for further analysis and storage. The source code of the program is available for download and reference at https://github.com/ScreenPlant/Foxtail-Millet-Image-Processing .
Analysis of i-traits throughout the entire growth periodOpen asset ↗ScreenPlant/Foxtail-Millet-Image-Processinglines:50-61Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
Plant cover and biochemical composition are essential parameters for evaluating cover crop management. Destructive sampling or estimates with aerial imagery require substantial labor, time, expertise, or instrumentation cost. Using low-cost consumer and mobile phone cameras to estimate plant canopy coverage and biochemical composition could broaden the use of high-throughput technologies in research and crop management. Here, we estimated canopy development, tissue nitrogen, and biomass of medium red clover (Trifolium pratense L.), a perennial forage legume and common cover crop, using red-green-blue (RGB) indices collected with standard settings in non-standardized field conditions. Pixels were classified as plant or background using combinations of four RGB indices with both unsupervised machine learning and preset thresholds. The excess green minus red (ExGR) index with a preset threshold of zero was the best index and threshold combination. It correctly identified pixels as plant or background 86.25% of the time. This combination also provided accurate estimates of crop growth and quality: Canopy coverage correlated with red clover biomass (R² = 0.554, root mean square error [RMSE] = 219.29 kg ha⁻¹), and ExGR index values of vegetation pixels were highly correlated with clover nitrogen content (R² = 0.573, RMSE = 3.5 g kg⁻¹) and carbon:nitrogen ratio (R² = 0.574, RMSE = 1.29 g g⁻¹). Data collection were simple to implement and stable across imaging conditions. Pending testing across different sensors, sites, and crop species, this method contributes to a growing and open set of decision support tools for agricultural research and management.
Why it matches plant phenotyping methods低コストRGB画像と画素分類を用いて、植物被覆、バイオマス、窒素含量、C:N比を推定する手法を開発・評価しており、表現型取得が研究の中心です。
abstractUsing low-cost consumer and mobile phone cameras to estimate plant canopy coverage and biochemical composition could broaden the use of high-throughput technologies in research and crop management.
Reproduction assets foundThe paper's authors state that all referenced analysis scripts for the RGB vegetation index processing, thresholding, and canopy cover estimation are publicly available on GitHub. The phenotype/trait data (images, biomass, N, C:N measurements) are deposited at a U of M repository (hdl.handle.net/11299/263900), but thatCode · publicreferenced scripts are available at https://github.com/RTGS- of nitrogen dictated by biomass and nitrogen content, and theOpen asset ↗pdf-page:4 lines:1-49Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Unmanaged forest ecosystems play a critical role in addressing the ongoing climate and biodiversity crises. As there is no commercial interest in monitoring the health and development of such inaccessible habitats, low-cost assessment approaches are needed. We used a method combining RGB imagery acquired using an Unmanned Aerial Vehicle (UAV), Sentinel-2 data, and field surveys to determine the carbon stock of an unmanaged forest in the UNESCO World Heritage Site wilderness area Dürrenstein-Lassingtal in Austria. The entry-level consumer drone (DJI Mavic Mini) and freely available Sentinel-2 multispectral datasets were used for the evaluation. We merged the Sentinel-2 derived vegetation index NDVI with aerial photogrammetry data and used an orthomosaic and a Digital Surface Model (DSM) to map the extent of woodland in the study area. The Random Forest (RF) machine learning (ML) algorithm was used to classify land cover. Based on the acquired field data, the average carbon stock per hectare of forest was determined to be 371.423 ± 51.106 t of CO2 and applied to the ML-generated class Forest. An overall accuracy of 80.8% with a Cohen’s kappa value of 0.74 was achieved for the land cover classification, while the carbon stock of the living above-ground biomass (AGB) was estimated with an accuracy within 5.9% of field measurements. The proposed approach demonstrated that the combination of low-cost remote sensing data and field work can predict above-ground biomass with high accuracy. The results and the estimation error distribution highlight the importance of accurate field data.
Why it matches plant phenotyping methodsUAV・衛星リモートセンシングと機械学習により森林の地上部バイオマス（炭素蓄積量）を推定し、現地測定と精度検証しているため、植物群落レベルの形質推定手法が中心です。
abstractWe used a method combining RGB imagery acquired using an Unmanned Aerial Vehicle (UAV), Sentinel-2 data, and field surveys to determine the carbon stock of an unmanaged forest
Reproduction assets foundThe paper's Data Availability Statement points to an openly available Zenodo deposit containing the original study data (field carbon stock measurements, UAV-derived datasets, and Sentinel-2 based analysis inputs). No separate author analysis code or trained model repository is mentioned.Dataset · publicData Availability Statement: The original data presented in the study are openly available here:
https://doi.org/10.5281/zenodo.11657557, accessed on 5 June 2024.Open asset ↗zenodo · 10.5281/zenodo.11657557pdf-page:17 lines:1-58Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 7 Sept 2026
Efficient and affordable plant phenotyping methods are an essential response to global climatic pressures. This study demonstrates the continued potential of consumer-grade photography to capture plant phenotypic traits in turfgrass and derive new calculations. Yet the effects of image corrections on individual calculations are often unreported. Turfgrass lysimeters were photographed over 8 weeks using a custom lightbox and consumer-grade camera. Subsequent imagery was analyzed for area of cover, color metrics, and sensitivity to image corrections. Findings were compared to active spectral reflectance data and previously reported measurements of visual quality, productivity, and water use. Results confirm that Red–Green–Blue imagery effectively measures plant treatment effects. Notable correlations were observed for corrected imagery, including between yellow fractional area with human visual quality ratings (r = −0.89), dark green color index with clipping productivity (r = 0.61), and an index combination term with water use (r = −0.60). The calculation of green fractional area correlated with Normalized Difference Vegetation Index (r = 0.91), and its RED reflectance spectra (r = −0.87). A new chromatic ratio correlated with Normalized Difference Red-Edge index (r = 0.90) and its Red-Edge reflectance spectra (r = −0.74), while a new calculation correlated strongest to Near-Infrared (r = 0.90). Additionally, the combined index term significantly differentiated between the treatment effects of date, mowing height, deficit irrigation, and their interactions (p < 0.001). Sensitivity and statistical analyses of typical image file formats and corrections that included JPEG, TIFF, geometric lens distortion correction, and color correction were conducted. Findings highlight the need for more standardization in image corrections and to determine the biological relevance of the new image data calculations.
Why it matches plant phenotyping methods安価なカメラ画像から芝草の被覆・色などの形質を抽出し、画像補正の感度、他センサーおよび既存測定との相関を検証しており、植物表現型取得法が中心である。
abstractThis study demonstrates the continued potential of consumer-grade photography to capture plant phenotypic traits in turfgrass and derive new calculations.
Reproduction assets foundThe paper deposits its phenotype measurement datasets (raw data, ANOVA statistics, time series) both in MDPI Supplementary Materials and in a public AgDataCommons dataset. Plant images are only available upon request, and no author analysis code repository with a public URL is stated.Dataset · publicDatasets are supplied in the Supplementary Materials and at https://agdatacommons.nal.usda.gov/articles/dataset/Data_from_Visualizing_Plant_Responses_Novel_Insights_Possible_through_Affordable_Imaging_Techniques_in_the_Greenhouse/26527447 , accessed on 13 August 2024; images are available upon request.Open asset ↗agdatacommons.nal.usda.gov · 26527447lines:97-173Supplement · publicThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/s24206676/s1 . Supplementary S1: F-values. Supplementary S2: p -values for experimental effects ANOVA ( Table 4 ), nine additional individual time series charts. Supplementary S3: of BA, %C, %G, DGCI, HSVi, NDRE, NIR, RED, and RE metrics. Supplementary S4: Additional discussion text. Supplementary S5: Raw data.Open asset ↗lines:97-173Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Plant diseases and pest infections are major factors that undermine the growth of plants along with their life cycle. Optical image-based plant disease detection provides an efficient and low cost way for real-time plant growth monitoring and management. In recent years, the thriving development of deep learning techniques in a variety of communities has validated its great performance in image interpretation and understanding. Existing deep learning-based methods for plant disease classification mostly adopt convolutional neural networks (CNNs) that have been originally developed for general image classification purposes. These CNN architectures consist of a very large volume of training parameters, which severely hinders its applicability under scenarios requiring fast and flexible deployment on compact devices with limited computation powers. In this paper, an ultra-lightweight efficient network (ULEN) is proposed targeting image-based plant disease and pest infection detection. The proposed network consists of two parts, a deep feature extraction module that adopts residual depth-wise convolution and a classification module receiving multi-scale features enhanced by a spatial pyramid pooling layer. The network is constructed in a very compact design with approximately only 100 000 parameters, which greatly favors the demand for a lightweight model for practical needs. Two publicly available plant datasets collected at the indoor and outdoor environments were tested on two compact devices to validate its applicability under different scenarios. Compared with the state-of-the-art architectures, the proposed network showed superior performance with the least computation complexity and compelling classification accuracy.
Why it matches plant phenotyping methods植物画像から病害・害虫感染状態を推定する軽量画像解析ネットワークを開発し、公開データセットと実機で性能・適用性を検証しており、植物状態の取得手法が中心である。
abstractIn this paper, an ultra-lightweight efficient network (ULEN) is proposed targeting image-based plant disease and pest infection detection.
Reproduction assets foundThe paper's experiments are built entirely on two public plant image datasets: the PlantVillage dataset (54,306 leaf images, 38 disease/plant classes) and the Cassava leaf disease dataset (21,397 field-collected images). Both are publicly available and are the direct inputs to the paper's plant disease classification/бDataset · publicThe publicly available Plantvillage dataset (Hughes and Salathé, 2015) is applied in this
work for experiments. The dataset consists of 54,306 images covering healthy and diseased
or pest-infected leaves of 14 plants.Open asset ↗pdf-raw-page:3 lines:1-46Dataset · publicTherefore, the Cassava leaf disease dataset [Mwebaze et al.,
2019] containing 21,397 images collected in Uganda was used to test model performances
under real-world scenarios.Open asset ↗pdf-raw-page:6 lines:1-29Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
PURPOSE: This paper proposes a low-cost and low-effort solution for determining the area of corn crops damaged by the wildlife facility utilising field images collected by an unmanned aerial vehicle (UAV). The proposed solution allows for the determination of the percentage of the damaged crops and their location. METHODS: The method utilises image segmentation models based on deep convolutional neural networks (e.g., UNet family) and transformers (SegFormer) trained on over 300 hectares of diverse corn fields in western Poland. A range of neural network architectures was tested to select the most accurate final solution. RESULTS: The tests show that despite using only easily accessible RGB data available from inexpensive, consumer-grade UAVs, the method achieves sufficient accuracy to be applied in practical solutions for agriculture-related tasks, as the IoU (Intersection over Union) metric for segmentation of healthy and damaged crop reaches 0.88. CONCLUSION: The proposed method allows for easy calculation of the total percentage and visualisation of the corn crop damages. The processing code and trained model are shared publicly.
Why it matches plant phenotyping methodsUAV画像からトウモロコシの健全・損傷状態をセグメンテーションし、損傷面積率と位置を推定する手法が研究の中心であり、植物状態の定量的フェノタイピングに該当する。
abstractThis paper proposes a low-cost and low-effort solution for determining the area of corn crops damaged by the wildlife facility utilising field images collected by an unmanned aerial vehicle (UAV).
Reproduction assets foundThe authors publicly share processing code, trained models, and a data sample for their corn damage segmentation at the PUTvision GitHub repository; the full training dataset is not public due to commercial restrictions. The QGIS deepness plugin is a generic third-party inference tool, not a paper-specific asset.Code · publicThe processing code, trained models and data sample can be found at https://github.com/PUTvision/corn-field-damage , accessed 17.01.2024.Open asset ↗PUTvision/corn-field-damagelines:226-252Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Urochloa grasses are widely used forages in the Neotropics and are gaining importance in other regions due to their role in meeting the increasing global demand for sustainable agricultural practices. High-throughput phenotyping (HTP) is important for accelerating Urochloa breeding programs focused on improving forage and seed yield. While RGB imaging has been used for HTP of vegetative traits, the assessment of phenological stages and seed yield using image analysis remains unexplored in this genus. This work presents a dataset of 2,400 high-resolution RGB images of 200 Urochloa hybrid genotypes, captured over seven months and covering both vegetative and reproductive stages. Images were manually labelled as vegetative or reproductive, and a subset of 255 reproductive stage images were annotated to identify 22,340 individual racemes. This dataset enables the development of machine learning and deep learning models for automated phenological stage classification and raceme identification, facilitating HTP and accelerated breeding of Urochloa spp. hybrids with high seed yield potential.
Why it matches plant phenotyping methods植物のフェノロジー段階と穂状花序を画像から識別するための高解像度データセットであり、植物表現型取得・抽出を中心とする研究。
abstractThis work presents a dataset of 2,400 high-resolution RGB images of 200 Urochloa hybrid genotypes, captured over seven months and covering both vegetative and reproductive stages.
Reproduction assets foundThe paper is itself a data descriptor whose core asset is a public Harvard Dataverse dataset of 2,400 RGB images of Urochloa hybrids with phenological stage labels and COCO-format raceme polygon annotations, directly reproducing the paper's phenotyping data.Dataset · publict diffuser to ensure uniform lighting.
Data source location
Institution: Alliance Bioversity International & CIAT.
City: Palmira, Valle del Cauca.
Country: Colombia.
Geolocalization: 3°29′N, 76°21′W .
Data accessibility
Repository name: Harvard Dataverse
Data identification number: doi.org/10.7910/dvn/u0kl6y
Direct URL to data: https://doi.org/10.7910/dvn/u0kl6y
Instructions for accessing these data: The dataset [ 1 ] is licensed under the Creative Commons Attribution 4.0 International, which allows using, sharing, adapting, distribution and reproduction in any medium or format if attribution is given to the creator.
Related research article
None .
1
Value of the Data
•
The dataset offOpen asset ↗Harvard Dataverselines:1-58Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
BACKGROUND: Phenotyping of plant traits presents a significant bottleneck in Quantitative Trait Loci (QTL) mapping and genome-wide association studies (GWAS). Computerized phenotyping using digital images promises rapid, robust, and reproducible measurements of dimension, shape, and color traits of plant organs, including grain, leaf, and floral traits. RESULTS: We introduce GRABSEEDS, which is specifically tailored to extract a comprehensive set of features from plant images based on state-of-the-art computer vision and deep learning methods. This command-line enabled tool, which is adept at managing varying light conditions, background disturbances, and overlapping objects, uses digital images to measure plant organ characteristics accurately and efficiently. GRABSEED has advanced features including label recognition and color correction in a batch setting. CONCLUSION: GRABSEEDS streamlines the plant phenotyping process and is effective in a variety of seed, floral and leaf trait studies for association with agronomic traits and stress conditions. Source code and documentations for GRABSEEDS are available at: https://github.com/tanghaibao/jcvi/wiki/GRABSEEDS .
Why it matches plant phenotyping methods植物器官画像から形状・寸法・色などの形質を抽出するソフトウェア手法の開発が中心であり、植物フェノタイピング手法として明確に該当する。
abstractWe introduce GRABSEEDS, which is specifically tailored to extract a comprehensive set of features from plant images based on state-of-the-art computer vision and deep learning methods.
Reproduction assets foundThe paper's authors publicly release the GRABSEEDS software (the computational phenotyping tool used for all measurements in this paper) along with the example images and datasets generated, at the GitHub wiki URL stated in the abstract, availability section, and data availability statement.Code · publicures including label recognition and color correction in a batch setting.
Conclusion
GRABSEEDS streamlines the plant phenotyping process and is effective in a variety of seed, floral and leaf trait studies for association with agronomic traits and stress conditions. Source code and documentations for GRABSEEDS are available at: https://github.com/tanghaibao/jcvi/wiki/GRABSEEDS .
Keywords: Image analysis, Phenotype, Seed traits, High throughput, QTL mapping
status released display-pdf yes is-olf no is-manuscript no is-preprint no is-journal-matter no is-scanned no is-retracted no
Received 2024 May 21; Accepted 2024 Sep 6; Collection date 2024.
IntroductionOpen asset ↗github.com/tanghaibao/jcvi · GRABSEEDSlines:1-28Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Plant sensors are commonly used in agricultural production, landscaping, and other fields to monitor plant growth and environmental parameters. As an important basic parameter in plant monitoring, leaf inclination angle (LIA) not only influences light absorption and pesticide loss but also contributes to genetic analysis and other plant phenotypic data collection. The measurements of LIA provide a basis for crop research as well as agricultural management, such as water loss, pesticide absorption, and illumination radiation. On the one hand, existing efficient solutions, represented by light detection and ranging (LiDAR), can provide the average leaf angle distribution of a plot. On the other hand, the labor-intensive schemes represented by hand measurements can show high accuracy. However, the existing methods suffer from low automation and weak leaf-plant correlation, limiting the application of individual plant leaf phenotypes. To improve the efficiency of LIA measurement and provide the correlation between leaf and plant, we design an image-phenotype-based noninvasive and efficient optical sensor measurement system, which combines multi-processes implemented via computer vision technologies and RGB images collected by physical sensing devices. Specifically, we utilize object detection to associate leaves with plants and adopt 3-dimensional reconstruction techniques to recover the spatial information of leaves in computational space. Then, we propose a spatial continuity-based segmentation algorithm combined with a graphical operation to implement the extraction of leaf key points. Finally, we seek the connection between the computational space and the actual physical space and put forward a method of leaf transformation to realize the localization and recovery of the LIA in physical space. Overall, our solution is characterized by noninvasiveness, full-process automation, and strong leaf-plant correlation, which enables efficient measurements at low cost. In this study, we validate Auto-LIA for practicality and compare the accuracy with the best solution that is acquired with an expensive and invasive LiDAR device. Our solution demonstrates its competitiveness and usability at a much lower equipment cost, with an accuracy of only 2. 5° less than that of the widely used LiDAR. As an intelligent processing system for plant sensor signals, Auto-LIA provides fully automated measurement of LIA, improving the monitoring of plant physiological information for plant protection. We make our code and data publicly available at http://autolia.samlab.cn.
Why it matches plant phenotyping methods葉傾斜角という植物形質を自動取得する画像ベース手法を開発し、LiDARと精度比較で検証しており、フェノタイピング手法が中心である。
abstractwe design an image-phenotype-based noninvasive and efficient optical sensor measurement system
Reproduction assets foundThe authors explicitly state that their code and data (the Auto-LIA LIA measurement system, including RGB image datasets and processing pipeline) are publicly available at their project site, which is among the allowed URLs.Code · publicWe make our code and data publicly available at http://autolia.samlab.cn .Open asset ↗autolia.samlab.cnlines:334-498Code / dataset availability confirmedarXiv · OpenAlex · checked 13 Sept 2026
AppleCitrusMangoPeachPearPlumField / plotLiDAR / point cloudRGB / grayscaleFruit
We introduce FruitNeRF, a unified novel fruit counting framework that leverages state-of-the-art view synthesis methods to count any fruit type directly in 3D. Our framework takes an unordered set of posed images captured by a monocular camera and segments fruit in each image. To make our system independent of the fruit type, we employ a foundation model that generates binary segmentation masks for any fruit. Utilizing both modalities, RGB and semantic, we train a semantic neural radiance field. Through uniform volume sampling of the implicit Fruit Field, we obtain fruit-only point clouds. By applying cascaded clustering on the extracted point cloud, our approach achieves precise fruit count.The use of neural radiance fields provides significant advantages over conventional methods such as object tracking or optical flow, as the counting itself is lifted into 3D. Our method prevents double counting fruit and avoids counting irrelevant fruit.We evaluate our methodology using both real-world and synthetic datasets. The real-world dataset consists of three apple trees with manually counted ground truths, a benchmark apple dataset with one row and ground truth fruit location, while the synthetic dataset comprises various fruit types including apple, plum, lemon, pear, peach, and mango.Additionally, we assess the performance of fruit counting using the foundation model compared to a U-Net.
Why it matches plant phenotyping methods果実を対象に、画像・NeRF・点群クラスタリングを組み合わせて3D果実数を推定する手法を開発し、実データおよび合成データで評価しているため、植物表現型取得法が中心である。
abstractWe introduce FruitNeRF, a unified novel fruit counting framework that leverages state-of-the-art view synthesis methods to count any fruit type directly in 3D.
Reproduction assets foundThe paper's real-world apple tree image dataset with manual ground-truth counts and synthetic Blender fruit tree data are publicly released via the project website, and the FruitNeRF analysis code is open-source on GitHub. The Zenodo DOI refers to the third-party BlenderNeRF plugin (cited tool), not a paper-specific.Dataset · publicThe data has been made publicly available, and visualizations can be accessed on the project website.Open asset ↗lines:183-221Code · publicFruitNeRF code: https://github.com/meyerls/FruitNeRF has been made open-source.Open asset ↗meyerls/FruitNeRFlines:74-108Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
The monitoring of plant diseases in nurseries, breeding farms and orchards is essential for maintaining plant health. Fire blight ( Erwinia amylovora ) is still one of the most dangerous diseases in fruit production, as it can spread epidemically and cause enormous economic damage. All measures are therefore aimed at preventing the spread of the pathogen in the orchard and containing an infection at an early stage [1-6]. Efficiency in plant disease control benefits from the development of a digital monitoring system if the spatial and temporal resolution of disease monitoring in orchards can be increased [7]. In this context, a digital disease monitoring system for fire blight based on RGB images was developed for orchards. Between 2021 and 2024, data was collected on nine dates under different weather conditions and with different cameras. The data source locations in Germany were the experimental orchard of the Julius Kühn Institute (JKI), Institute of Plant Protection in Fruit Crops and Viticulture in Dossenheim, the experimental greenhouse of the Julius Kühn Institute for Resistance Research and Stress Tolerance in Quedlinburg and the experimental orchard of the JKI for Breeding Research on Fruit Crops located in Dresden-Pillnitz. The RGB images were taken on different apple genotypes after artificial inoculation with Erwinia amylovora , including cultivars, wild species and progeny from breeding. The presented ERWIAM dataset contains manually labelled RGB images with a size of 1280 × 1280 pixels of fire blight infected shoots, flowers and leaves in different stages of development as well as background images without symptoms. In addition, symptoms of other plant diseases were acquired and integrated into the ERWIAM dataset as a separate class. Each fire blight symptom was annotated with the Computer Vision Annotation Tool (CVAT [8]) using 2-point annotations (bounding boxes) and presented in YOLO 1.1 format (.txt files). The dataset contains a total of 1611 annotated images and 87 background images. This dataset can be used as a resource for researchers and developers working on digital systems for plant disease monitoring.
Why it matches plant phenotyping methodsRGB画像から植物病徴を検出するための注釈付きデータセットを開発・提示しており、植物病害状態の画像ベース表現型評価が中心である。
abstracta digital disease monitoring system for fire blight based on RGB images was developed for orchards.
Reproduction assets foundThe paper is a data descriptor for the ERWIAM dataset of annotated RGB images of fire blight symptoms, publicly deposited on Mendeley Data with a direct URL and DOI given in the text.Dataset · publicTolerance located in Quedlinburg (Germany) [51°46ʹ22″N 11°08ʹ41″E] and at the experimental orchard of the JKI for Breeding Research on Fruit Crops located in Dresden-Pillnitz (Germany) [51°00ʹ01″N 13°53ʹ12"E].
Data accessibility
Repository name: Mendeley Data
Data identification number: 10.17632/fpmnncmg84.1
Direct URL to data: https://data.mendeley.com/datasets/fpmnncmg84/1
1
Value of the Data
•
In the experimental greenhouse of the JKI-Quedlinburg Institute, around 2000 different genotypes of apple breeding material were artificially inoculated with Erwinia amylovora in 2021 and 2022, which could be used to record fire blight symptoms. The JKI-Dossenheim Institute has a heterogeneous appleOpen asset ↗Mendeley Data · 10.17632/fpmnncmg84.1lines:42-82Code / dataset availability confirmedOpenAlex · checked 7 Sept 2026
Individual tree canopy extraction plays an important role in downstream studies such as plant phenotyping, panoptic segmentation and growth monitoring. Canopy volume calculation is an essential part of these studies. However, existing volume calculation methods based on LiDAR or based on UAV-RGB imagery cannot balance accuracy and real-time performance. Thus, we propose a two-step individual tree volumetric modeling method: first, we use RGB remote sensing images to obtain the crown volume information, and then we use spatially aligned point cloud data to obtain the height information to automate the calculation of the crown volume. After introducing the point cloud information, our method outperforms the RGB image-only based method in 62.5% of the volumetric accuracy. The AbsoluteError of tree crown volume is decreased by 8.304. Compared with the traditional 2.5D volume calculation method using cloud point data only, the proposed method is decreased by 93.306. Our method also achieves fast extraction of vegetation over a large area. Moreover, the proposed YOLOTree model is more comprehensive than the existing YOLO series in tree detection, with 0.81% improvement in precision, and ranks second in the whole series for mAP50-95 metrics. We sample and open-source the TreeLD dataset to contribute to research migration.
Why it matches plant phenotyping methodsUAV-RGB画像とLiDARを用いて個体樹冠体積を推定する手法を開発・評価しており、単なる樹木位置検出を超えた植物形態形質の抽出が中心です。データセット公開も行っています。
abstractwe propose a two-step individual tree volumetric modeling method
Reproduction assets foundThe paper's authors explicitly state their analysis code (YOLOTree phenotyping/crown volume pipeline) is publicly available on GitHub, matching an allowed URL.Code · publicOur code is available at: https://github.com/luotiger123/YOLOtree.Open asset ↗luotiger123/YOLOtreepdf-page:12 lines:1-67Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
Drought stress is one of the main threats to poplar plant growth and has a negative impact on plant yield. Currently, high-throughput plant phenotyping has been widely studied as a rapid and nondestructive tool for analyzing the growth status of plants, such as water and nutrient content. In this study, a combination of computer vision and deep learning was used for drought-stressed poplar sapling phenotyping. Four varieties of poplar saplings were cultivated, and 5 different irrigation treatments were applied. Color images of the plant samples were captured for analysis. Two tasks, including leaf posture calculation and drought stress identification, were conducted. First, instance segmentation was used to extract the regions of the leaf, petiole, and midvein. A dataset augmentation method was created for reducing manual annotation costs. The horizontal angles of the fitted lines of the petiole and midvein were calculated for leaf posture digitization. Second, multitask learning models were proposed for simultaneously determining the stress level and poplar variety. The mean absolute errors of the angle calculations were 10.7° and 8.2° for the petiole and midvein, respectively. Drought stress increased the horizontal angle of leaves. Moreover, using raw images as the input, the multitask MobileNet achieved the highest accuracy (99% for variety identification and 76% for stress level classification), outperforming widely used single-task deep learning models (stress level classification accuracies of <70% on the prediction dataset). The plant phenotyping methods presented in this study could be further used for drought-stress-resistant poplar plant screening and precise irrigation decision-making.
Why it matches plant phenotyping methods画像解析と深層学習により、葉姿勢の定量化および干ばつストレス同定手法を開発・評価しており、植物表現型取得が研究の中心である。
abstractIn this study, a combination of computer vision and deep learning was used for drought-stressed poplar sapling phenotyping.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe codes for conducting the proposed poplar plant image generation method and for annotation format conversion were uploaded to the GitHub platform ( https://github.com/L-Zhou17/Plant-Image-Generation ). Other codes and datasets are available upon request.Open asset ↗L-Zhou17/Plant-Image-Generationlines:269-294Code / dataset availability confirmedCrossref · Europe PMC · checked 13 Sept 2026
Classifying images is one of the most important tasks in computer vision. Recently, the best performance for image classification tasks has been shown by networks that are both deep and well-connected. These days, most datasets are made up of a fixed number of color images. The input images are taken in red green blue (RGB) format and classified without any changes being made to the original. It is observed that color spaces (basically changing original RGB images) have a major impact on classification accuracy, and we delve into the significance of color spaces. Moreover, datasets with a highly variable number of classes, such as the PlantVillage dataset utilizing a model that incorporates numerous color spaces inside the same model, achieve great levels of accuracy, and different classes of images are better represented in different color spaces. Furthermore, we demonstrate that this type of model, in which the input is preprocessed into many color spaces simultaneously, requires significantly fewer parameters to achieve high accuracy for classification. The proposed model basically takes an RGB image as input, turns it into seven separate color spaces at once, and then feeds each of those color spaces into its own Convolutional Neural Network (CNN) model. To lessen the load on the computer and the number of hyperparameters needed, we employ group convolutional layers in the proposed CNN model. We achieve substantial gains over the present state-of-the-art methods for the classification of crop disease.
Why it matches plant phenotyping methods植物病害画像を対象に、複数色空間とグループ畳み込みCNNによる病害分類手法を提案・評価しており、植物の病害状態を画像から推定する方法が研究の中心である。
titleCropGCNN: color space-based crop disease classification using group convolutional neural network
Reproduction assets foundThe paper uses the public PlantVillage dataset (Kaggle mirror) as its plant-disease image input for the GCNN classification experiments, with an explicit availability statement. The authors' source code is only in a supplemental file whose URL is not among the allowed URLs, so it cannot be listed.Dataset · publicThe PlantVillage Dataset is available at Kaggle: https://www.kaggle.com/datasets/emmarex/plantdisease .Open asset ↗Kaggle · emmarex/plantdiseaselines:124-150Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Groundnut (Arachis hypogaea) is a widely cultivated legume crop that plays a vital role in global agriculture and food security. It is a major source of vegetable oil and protein for human consumption, as well as a cash crop for farmers in many regions. Despite the importance of this crop to household food security and income, diseases, particularly Leaf spot (early and late), Alternaria leaf spot, Rust, and Rosette, have had a significant impact on its production. Deep learning (DL) techniques, especially convolutional neural networks (CNNs), have demonstrated significant ability for early diagnosis of the plant leaf diseases. However, the availability of groundnut-specific datasets for training and evaluation of DL models is limited, hindering the development and benchmarking of groundnut-related deep learning applications. Therefore, this study provides a dataset of groundnut leaf images, both diseased and healthy, captured in real cultivation fields at Ramchandrapur, Purba Medinipur, West Bengal, using a smartphone camera. The dataset contains a total of 1720 original images, that can be utilized to train DL models to detect groundnut leaf diseases at an early stage. Additionally, we provide baseline results of applying state-of-the-art CNN architectures on the dataset for groundnut disease classification, demonstrating the potential of the dataset for advancing groundnut-related research using deep learning. The aim of creating this dataset is to facilitate in the creation of sophisticated methods that will aid farmers accurately identify diseases and enhance groundnut yields.
Why it matches plant phenotyping methods落花生葉の健全・病葉画像データセットを提供し、植物病害状態の画像ベース判定を可能にすることが中心で、ベースライン評価も含むため。
abstractTherefore, this study provides a dataset of groundnut leaf images, both diseased and healthy, captured in real cultivation fields
Reproduction assets foundThe paper's own groundnut leaf image dataset (1720 images, diseased and healthy) is publicly deposited on Mendeley Data with an explicit DOI and direct URL, matching an allowed URL.Dataset · publiccategorised based on disease criteria with the assistance of a pathologist.
Data source location
Ramchandrapur, Purba Medinipur, West Bengal, India, Pin: 721429 Latitude 21.930146 and Longitude 87.556852
Data accessibility
Repository name: Mendeley Data.
Data identification number: DOI: 10.17632/x6x5jkk873.2
Direct URL to data: https://data.mendeley.com/datasets/x6x5jkk873/2
Instructions for accessing these data: All the image can be downloaded by the following link: https://data.mendeley.com/datasets/x6x5jkk873/2
1.
Value of the Data
•
We address four prominent diseases that specifically target groundnut leaves, causing significant damage to numerous groundnut fields. Researchers and practiOpen asset ↗Mendeley Data · 10.17632/x6x5jkk873.2lines:1-47Code / dataset availability confirmedEurope PMC · OpenAlex · checked 7 Sept 2026
Plant phenotype detection plays a crucial role in understanding and studying plant biology, agriculture, and ecology. It involves the quantification and analysis of various physical traits and characteristics of plants, such as plant height, leaf shape, angle, number, and growth trajectory. By accurately detecting and measuring these phenotypic traits, researchers can gain insights into plant growth, development, stress tolerance, and the influence of environmental factors, which has important implications for crop breeding. Among these phenotypic characteristics, the number of leaves and growth trajectory of the plant are most accessible. Nonetheless, obtaining these phenotypes is labor intensive and financially demanding. With the rapid development of computer vision technology and artificial intelligence, using maize field images to fully analyze plant-related information can greatly eliminate repetitive labor and enhance the efficiency of plant breeding. However, it is still difficult to apply deep learning methods in field environments to determine the number and growth trajectory of leaves and stalks due to the complex backgrounds and serious occlusion problems of crops in field environments. To preliminarily explore the application of deep learning technology to the acquisition of the number of leaves and stalks and the tracking of growth trajectories in field agriculture, in this study, we developed a deep learning method called Point-Line Net, which is based on the Mask R-CNN framework, to automatically recognize maize field RGB images and determine the number and growth trajectory of leaves and stalks. The experimental results demonstrate that the object detection accuracy (mAP50) of our Point-Line Net can reach 81.5%. Moreover, to describe the position and growth of leaves and stalks, we introduced a new lightweight "keypoint" detection branch that achieved a magnitude of 33.5 using our custom distance verification index. Overall, these findings provide valuable insights for future field plant phenotype detection, particularly for datasets with dot and line annotations.
Why it matches plant phenotyping methodsトウモロコシの葉・茎の数と成長軌跡をRGB画像から抽出する深層学習手法を開発し、精度評価も行っており、植物表現型取得が研究の中心である。
abstractin this study, we developed a deep learning method called Point-Line Net, which is based on the Mask R-CNN framework, to automatically recognize maize field RGB images and determine the number and growth trajectory of leaves and stalks.
Reproduction assets foundThe authors explicitly deposit the code (and data) supporting this maize leaf/stalk trajectory phenotyping study in a public GitHub repository, matching an allowed URL.Code · publicThe computer code and data that support the findings of this study are deposited in a GitHub repository at https://github.com/VEGETALOADING/Point-Line-Net .Open asset ↗VEGETALOADING/Point-Line-Netlines:319-524Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Accurate wheat ear counting is one of the key indicators for wheat phenotyping. Convolutional neural network (CNN) algorithms for counting wheat have evolved into sophisticated tools, however because of the limitations of sensory fields, CNN is unable to simulate global context information, which has an impact on counting performance. In this study, we present a hybrid attention network (CTHNet) for wheat ear counting from RGB images that combines local features and global context information. On the one hand, to extract multi-scale local features, a convolutional neural network is built using the Cross Stage Partial framework. On the other hand, to acquire better global context information, tokenized image patches from convolutional neural network feature maps are encoded as input sequences using Pyramid Pooling Transformer. Then, the feature fusion module merges the local features with the global context information to significantly enhance the feature representation. The Global Wheat Head Detection Dataset and Wheat Ear Detection Dataset are used to assess the proposed model. There were 3.40 and 5.21 average absolute errors, respectively. The performance of the proposed model was significantly better than previous studies.
Why it matches plant phenotyping methods小麦穂数という植物形質をRGB画像から推定する深層学習手法を開発し、複数データセットで性能評価しており、表現型取得・抽出法が中心である。
abstractAccurate wheat ear counting is one of the key indicators for wheat phenotyping.
Reproduction assets foundThe paper uses two publicly available wheat ear image datasets (GWHD and WEDD) as its phenotyping inputs, with explicit public URLs in the data availability statement. No authors' analysis code or trained model is deposited.Dataset · publics generalization ability. This will provide real-time and accurate information for agricultural production, help farmers make scientific decisions, and improve crop management and yield.
Data availability statement
Publicly available datasets were analyzed in this study. This data can be found here: http://www.global-wheat.com/
https://github.com/simonMadec .
Author contributions
QH: Conceptualization, Formal analysis, Investigation, Methodology, Validation, Visualization, Writing – review & editing. WL: Conceptualization, Formal analysis, Investigation, Methodology, Software, Validation, Visualization, Writing – original draft. YZ: Software, Writing – review & editing. TR: SoftwaOpen asset ↗https://github.com/simonMadeclines:388-410Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · checked 7 Sept 2026
Field-based phenomic prediction employs novel features, like vegetation indices (VIs) from drone images, to predict key agronomic traits in maize, despite challenges in matching biomarker measurement time points across years or environments. This study utilized functional principal component analysis (FPCA) to summarize the variation of temporal VIs, uniquely allowing the integration of this data into phenomic prediction models tested across multiple years (2018-2021) and environments. The models, which included 1 genomic, 2 phenomic, 2 multikernel, and 1 multitrait type, were evaluated in 4 prediction scenarios (CV2, CV1, CV0, and CV00), relevant for plant breeding programs, assessing both tested and untested genotypes in observed and unobserved environments. Two hybrid populations (415 and 220 hybrids) demonstrated the visible atmospherically resistant index's strong temporal correlation with grain yield (up to 0.59) and plant height. The first 2 FPCAs explained 59.3 ± 13.9% and 74.2 ± 9.0% of the temporal variation of temporal data of VIs, respectively, facilitating predictions where flight times varied. Phenomic data, particularly when combined with genomic data, often were comparable to or numerically exceeded the base genomic model in prediction accuracy, particularly for grain yield in untested hybrids, although no significant differences in these models' performance were consistently observed. Overall, this approach underscores the effectiveness of FPCA and combined models in enhancing the prediction of grain yield and plant height across environments and diverse agricultural settings.
Why it matches plant phenotyping methodsドローン画像由来の時系列植生指数をFPCAで要約し、穀粒収量・草丈予測へ統合するフェノタイピング手法と予測モデルを複数年・環境で評価しており、表現型取得・抽出と技術的評価が中心である。
titleField-based high-throughput phenotyping enhances phenomic and genomic predictions for grain yield and plant height across years in maize
Reproduction assets foundThe authors deposited a public figshare archive ('Data.zip') containing the paper's phenomic FPCA result files, plant height and grain yield BLUEs, genomic numerical files, and the R prediction/FPCA code needed to reproduce the analysis.Dataset · publicData are available at figshare: https://doi.org/10.25387/g3.24657666 .Open asset ↗figshare · 10.25387/g3.24657666lines:273-291Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Precision farming has been developing with the intention of identifying within field variability to adjust management strategies and maximize end of season yield and profitability and minimize negative environmental impacts. The development of quick, easy, and low cost methods to quantify field level variation is essential to successful implementation of precision agriculture at scale. Temporal plant height and growth rates collected with unoccupied aerial vehicles mounted with red, green, blue sensors have the potential to predict end of season grain yield, which could facilitate mid-season management decisions. Image-based plant height data was collected weekly from commercial maize fields in three growing seasons to assess variation within fields and the relationship with grain yield variation. Plant height, growth rate, and grain yield had variable relationships depending on the time point and growth environment. Models developed using temporal traits predicted grain yield variation within a commercial field up to r = 0.7, though insufficient water affected the prediction accuracy in one field due to the limited representation of drought environments in the model development. In the future, with more data from stress environments, such as drought, this method has potential for high accuracy grain yield prediction across a range of environmental conditions. This study demonstrates the potential of using unoccupied aerial vehicles to derive vegetative growth patterns and model within field variations, and has application in making mid-season management decisions.
Why it matches plant phenotyping methodsUAV画像から植物高と成長率を抽出し、時系列形質による圃場内収量変動予測を評価しており、植物表現型の取得・解析手法が研究の中心です。
abstractTemporal plant height and growth rates collected with unoccupied aerial vehicles mounted with red, green, blue sensors have the potential to predict end of season grain yield
Reproduction assets foundThe paper explicitly states that all analysis scripts are on GitHub and all UAV-derived phenotypic data (plot heights, vegetative indices, orthomosaics, DEMs, plot boundaries, masks, manual heights, yield, weather) are deposited in DRUM with a DOI.Code · publicAll of the scripts and files used to generate and analyze data are available on GitHub at
https://github.com/HirschLabUMN/Production_Drone_Height.git.Open asset ↗HirschLabUMN/Production_Drone_Heightpdf-page:17 lines:1-56Code / dataset availability confirmedCrossref · Europe PMC · checked 7 Sept 2026
Abstract Deep learning has emerged as a highly effective and precise method for classifying images. The presence of plant diseases poses a significant threat to food security. However, accurately identifying these diseases in plants is challenging due to limited infrastructure and techniques. Fortunately, the recent advancements in deep learning within the field of computer vision have opened up new possibilities for diagnosing plant pathology. Detecting plant diseases at an early stage is crucial, and this research paper proposes a deep convolutional neural network model that can rapidly and accurately identify plant diseases. Given the minimal variation in image texture and color, deep learning techniques are essential for robust recognition. In this study, we introduce a deep, explainable neural architecture specifically designed for recognizing plant diseases. Fine-tuned deep convolutional neural network is designed by freezing the layers and adjusting the weights of learnable layers. By extracting deep features from a down sampled feature map of a fine-tuned neural network, we are able to classify these features using a customized K-Nearest Neighbors Algorithm. To train and validate our model, we utilize the largest standard plant village dataset, which consists of 38 classes. To evaluate the performance of our proposed system, we estimate specificity, sensitivity, accuracy, and AUC. The results demonstrate that our system achieves an impressive maximum validation accuracy of 99.95% and an AUC of 1, making it the most ideal and highest-performing approach compared to current state-of-the-art deep learning methods for automatically identifying plant diseases.
Why it matches plant phenotyping methods植物病害画像から病害状態を推定する深層学習手法の開発と性能評価が研究の中心であり、植物フェノタイピング手法に該当する。
abstractthis research paper proposes a deep convolutional neural network model that can rapidly and accurately identify plant diseases.
Reproduction assets foundThe paper's Data availability statement names the PlantVillage leaf-image dataset (the paper's phenotyping input) as publicly available on Kaggle; no author code or model deposit is provided.Dataset · publicThis work is based on the plant village dataset. It is publicly available at https://www.kaggle.com/datasets/abdalOpen asset ↗Kagglepdf-page:12 lines:1-86Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Field / plotRGB / grayscaleLeafClassificationDisease symptoms / severity
Papaya, renowned for its nutritional benefits, represents a highly profitable crop. However, it is susceptible to various diseases that can significantly impede fruit productivity and quality. Among these, leaf diseases pose a substantial threat, severely impacting the growth of papaya plants. Consequently, papaya farmers frequently encounter numerous challenges and financial setbacks. To facilitate the easy and efficient identification of papaya leaf diseases, a comprehensive dataset has been assembled. This dataset, comprising approximately 1400 images of diseased, infected, and healthy leaves, aims to enhance the understanding of how these ailments affect papaya plants. The images, meticulously collected from diverse regions and under varying weather conditions, offer detailed insights into the disease patterns specific to papaya leaves. Stringent measures have been taken to ensure the dataset's quality and enhance its utility. The images, captured from multiple angles and boasting high resolution are designed to aid in the development of a highly accurate model. Additionally, RGB mode has been employed to meticulously capture each detail, ensuring a flawless representation of the leaves. The dataset meticulously identifies and categorizes five primary types of leaf diseases: Leaf Curl (inclusive of its initial stage), Papaya Mosaic, Ring Spot, Mites (specifically, those affected by Red Spider Mites), and Mealybug. These diseases are recognized for their detrimental effects on both the leaves and the overall fruit production of the papaya plant. By leveraging this curated dataset, it is possible to train a model for the real-time detection of leaf diseases, significantly aiding in the timely identification of such conditions.
Why it matches plant phenotyping methodsパパイヤ葉の健全・病害状態を画像で取得したデータセットであり、植物病害表現型の再利用可能なデータ基盤として中心的です。
abstracta comprehensive dataset has been assembled
Reproduction assets foundThe paper is a Data in Brief article describing a smartphone image dataset of healthy and diseased papaya leaves (~1400 original, 6618 augmented images across six classes) collected in Bangladesh. The authors' own dataset is publicly deposited on Mendeley Data with an explicit direct URL and DOI, making it a paper-phenDataset · publicn Rangpur district (latitude: 25° 34′ 30.6942″, longitude: 89° 16′ 22.2672″), and
4. Chotali Purbo Para village papaya garden in Rangpur district (latitude: 25° 34′ 30.6942″, longitude: 89° 16′ 22.2672″).
Data accessibility
Repository name: Mendeley Data
Data identification number: DOI: 10.17632/44p8v6ywsm.1
Direct URL to data: https://data.mendeley.com/datasets/44p8v6ywsm/1
1
Value of the Data
•Open asset ↗Mendeley Data · 10.17632/44p8v6ywsm.1lines:1-48Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Growth chamberRGB / grayscaleRootObject detectionSegmentationGrowth / time-series analysisBiomass / plant weightGrowth / development / phenologyRoot system architecture
Abstract Flatbed scanners are commonly used for root analysis, but typical manual segmentation methods are time-consuming and prone to errors, especially in large-scale, multi-plant studies. Furthermore, the complex nature of root structures combined with noisy backgrounds in images complicates automated analysis. Addressing these challenges, this article introduces RhizoNet, a deep learning-based workflow to semantically segment plant root scans. Utilizing a sophisticated Residual U-Net architecture, RhizoNet enhances prediction accuracy and employs a convex hull operation for delineation of the primary root component. Its main objective is to accurately segment root biomass and monitor its growth over time. RhizoNet processes color scans of plants grown in a hydroponic system known as EcoFAB, subjected to specific nutritional treatments. The root detection model using RhizoNet demonstrates strong generalization in the validation tests of all experiments despite variable treatments. The main contributions are the standardization of root segmentation and phenotyping, systematic and accelerated analysis of thousands of images, significantly aiding in the precise assessment of root growth dynamics under varying plant conditions, and offering a path toward self-driving labs.
Why it matches plant phenotyping methods植物根の画像分割と根バイオマス・成長の表現型抽出ワークフローを開発・検証しており、フェノタイピング手法が中心である。
abstractthis article introduces RhizoNet, a deep learning-based workflow to semantically segment plant root scans.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicPython codes for root scans segmentation enabled by RhizoNet were created by the authors and are described in this paper. These codes will be available free of charge upon acceptance, and with open source at: https://github.com/lbl-camera/rhizonet .Open asset ↗lbl-camera/rhizonetlines:154-177Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Background Plants are known to be infected by a wide range of pathogenic microbes. To study plant diseases caused by microbes, it is imperative to be able to monitor disease symptoms and microbial colonization in a quantitative and objective manner. In contrast to more traditional measures that use manual assignments of disease categories, image processing provides a more accurate and objective quantification of plant disease symptoms. Besides monitoring disease symptoms, computational image processing provides additional information on the spatial localization of pathogenic microbes in different plant tissues. Results Here we report on an image analysis tool called ScAnalyzer to monitor disease symptoms and bacterial spread in Arabidopsis thaliana leaves. Thereto, detached leaves are assembled in a grid and scanned, which enables automated separation of individual samples. A pixel color threshold is used to segment healthy (green) from chlorotic (yellow) leaf areas. The spread of luminescence-tagged bacteria is monitored via light-sensitive films, which are processed in a similar manner as the leaf scans. We show that this tool is able to capture previously identified differences in susceptibility of the model plant A. thaliana to the bacterial pathogen Xanthomonas campestris pv. campestris. Moreover, we show that the ScAnalyzer pipeline provides a more detailed assessment of bacterial spread within plant leaves than previously used methods. Finally, by combining the disease symptom values with bacterial spread values from the same leaves, we show that bacterial spread precedes visual disease symptoms. Conclusion Taken together, we present an automated script to monitor plant disease symptoms and microbial spread in A. thaliana leaves. The freely available software ( https://github.com/MolPlantPathology/ScAnalyzer ) has the potential to standardize the analysis of disease assays between different groups.
Why it matches plant phenotyping methods植物葉の病徴と病原体拡散を画像処理で定量化するツールおよび解析パイプラインが研究の中心であり、植物の病害状態を直接推定するため。
abstractimage processing provides a more accurate and objective quantification of plant disease symptoms.
Reproduction assets foundThe paper's ScAnalyzer Python/R analysis pipeline and the raw leaf/luminescence images are publicly available on the authors' GitHub repository, along with the printable leaf-grid sheet used for phenotyping.Code · publicThe code is available on GitHub ( https://github.com/MolPlantPathology/ScAnalyzer ).Open asset ↗MolPlantPathology/ScAnalyzerlines:124-131Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Deep learning and multimodal remote and proximal sensing are widely used for analyzing plant and crop traits, but many of these deep learning models are supervised and necessitate reference datasets with image annotations. Acquiring these datasets often demands experiments that are both labor-intensive and time-consuming. Furthermore, extracting traits from remote sensing data beyond simple geometric features remains a challenge. To address these challenges, we proposed a radiative transfer modeling framework based on the Helios 3-dimensional (3D) plant modeling software designed for plant remote and proximal sensing image simulation. The framework has the capability to simulate RGB, multi-/hyperspectral, thermal, and depth cameras, and produce associated plant images with fully resolved reference labels such as plant physical traits, leaf chemical concentrations, and leaf physiological traits. Helios offers a simulated environment that enables generation of 3D geometric models of plants and soil with random variation, and specification or simulation of their properties and function. This approach differs from traditional computer graphics rendering by explicitly modeling radiation transfer physics, which provides a critical link to underlying plant biophysical processes. Results indicate that the framework is capable of generating high-quality, labeled synthetic plant images under given lighting scenarios, which can lessen or remove the need for manually collected and annotated data. Two example applications are presented that demonstrate the feasibility of using the model to enable unsupervised learning by training deep learning models exclusively with simulated images and performing prediction tasks using real images.
Why it matches plant phenotyping methods植物のRGB・マルチ/ハイパースペクトル・熱・深度画像と植物形質ラベルを生成するシミュレーション基盤を開発しており、表現型取得・学習用データ生成が中心的な方法論的貢献である。
abstractwe proposed a radiative transfer modeling framework based on the Helios 3-dimensional (3D) plant modeling software designed for plant remote and proximal sensing image simulation.
Reproduction assets foundThe paper's phenotyping analysis relies on three public, paper-specific assets: the Helios framework code (used to generate the synthetic annotated images), the MSU-PID bean image dataset, and the strawberry.00 annotated dataset, all with explicit open-availability statements and URLs.Dataset · publicThe Bean data that support the findings of this study are openly available in MSU-PID at https://www.cse.msu.edu/computervision/MVA15-MSU-PID.zipOpen asset ↗MSU-PIDlines:255-283Dataset · publicThe strawberry data that support the findings of this study are openly available in strawberry.00 at https://universe.roboflow.com/skripsie/strawberry.00Open asset ↗strawberry.00lines:255-283Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Abstract Plant disease severity is the ratio between the surface area of disease symptoms and the total surface area of the plant unit (e.g. fruit, leaf). It is related to plant disease diagnosis and has several advantages for farmers. It is therefore a key element in the protection and management of plant diseases. In the literature, there are three proposed categories of plant disease severity determination solutions: those based on segmentation algorithms, those based on classical ML algorithms and those based on DL algorgorithms. Despite their many advantages, these solutions have a number of limitations, including i) subjectivity in data labeling, ii) loss of information on disease lesion contours during (manual) data labeling, and iii) the proposed solutions have focused on estimating plant disease severity from leaves, although diseases can also affect other parts of the plant, such as fruits. In this paper, we present a solution for estimating the severity of four mango fruit diseases, namely alternaria, anthracnose, aspergillus rot and stem rot. This solution is based on ResNet50 CNN and uses a dataset automatically labeled by a proposed algorithm based on two segmentation algorithms such as image color space segmentation and image thresholding. The solution has achieved an accuracy and a F1_score of 97.82% and 97.79%, respectively, on test data. It is then deployed in a mobile application with a diagnostic solution we previously proposed. This mobile application will help mango growers, particularly those in Sahelian countries like Senegal, to manage their mango diseases earlier.
Why it matches plant phenotyping methodsマンゴー果実の病斑面積に基づく病害重症度を、画像セグメンテーションと深層学習で推定する方法が中心であり、植物状態の定量的フェノタイピングに該当する。
abstractIn this paper, we present a solution for estimating the severity of four mango fruit diseases
Reproduction assets foundThe paper uses the authors' own public SenMangoFruitDDS dataset of 862 mango fruit images, explicitly stated to be downloadable from Mendeley Data, as the image input for their severity estimation and automatic labeling pipeline. No code or trained model deposit is mentioned.Dataset · public2 Material and Method
2.1 Datataset used
In this work, we have used our dataset SenMangoFruitDDS presented in our paper [8].
It is downloadable from Mendeley data plateform via the url https://data.mendeley.com/datasets/jvszp9cbpw/3. This dataset contains 862 mango fruit images of four dis-
eases such as Anthracnose, Alternariose, aspergillus rot and Stem and rot. The infected
fruits in the images show different stages of severity. The dataset also contains, as
additionnal category, images of healthy mango fruits. Mango fruit images are gathered
from an orOpen asset ↗Mendeley · jvszp9cbpw/3pdf-raw-page:5 lines:1-26Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Background The genetic basis of colour development in red-flesh apples (Malus domestica Borkh) has been widely characterised; however, current models do not explain the observed variations in red pigmentation intensity and distribution. Available methods to evaluate the red-flesh trait rely on the estimation of an average overall colour using a discrete class notation index. However, colour variations among red-flesh cultivars are continuous while development of red colour is non-homogeneous and genotype-dependent. A robust estimation of red-flesh colour intensity and distribution is essential to fully capture the diversity among genotypes and provide a basis to enable identification of loci influencing the red-flesh trait. Results In this study, we developed a multivariable approach to evaluate the red-flesh trait in apple. This method was implemented to study the phenotypic diversity in a segregating hybrid F1 family (91 genotypes). We developed a Python pipeline based on image and colour analysis to quantitatively dissect the red-flesh pigmentation from RGB (Red Green Blue) images and compared the efficiency of RGB and CIEL*a*b* colour spaces in discriminating genotypes previously classified with a visual notation. Chemical destructive methods, including targeted-metabolite analysis using ultra-high performance liquid chromatography with ultraviolet detection (UPLC-UV), were performed to quantify major phenolic compounds in fruits' flesh, as well as pH and water contents. Multivariate analyses were performed to study covariations of biochemical factors in relation to colour expression in CIEL*a*b* colour space. Our results indicate that anthocyanin, flavonol and flavanol concentrations, as well as pH, are closely related to flesh pigmentation in apple. Conclustion Extraction of colour descriptors combined to chemical analyses helped in discriminating genotypes in relation to their flesh colour. These results suggest that the red-flesh trait in apple is a complex trait associated with several biochemical factors.
Why it matches plant phenotyping methodsリンゴ果肉の赤色形質をRGB画像と色解析で定量する手法を開発し、遺伝子型間の識別に実質的に適用しているため、植物フェノタイピング手法が中心である。
abstractWe developed a Python pipeline based on image and colour analysis to quantitatively dissect the red-flesh pigmentation from RGB (Red Green Blue) images
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicScript designed for image analysis is public and can be found at: https://github.com/pibouillon/colour_val/blob/main/colour_val.pyOpen asset ↗https://github.com/pibouillon/colour_val · colour_val.pylines:166-220Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This research introduces an extensive dataset of unprocessed aerial RGB images and orthomosaics of Brassica oleracea crops, captured via a DJI Phantom 4. The dataset, publicly accessible, comprises 244 raw RGB images, acquired over six distinct dates in October and November of 2020 as well as 6 orthomosaics from an experimental farm located in Portici, Italy. The images, uniformly distributed across crop spaces, have undergone both manual and automatic annotations, to facilitate the detection, segmentation, and growth modelling of crops. Manual annotations were performed using bounding boxes via the Visual Geometry Group Image Annotator (VIA) and exported in the Common Objects in Context (COCO) segmentation format. The automated annotations were generated using a framework of Grounding DINO + Segment Anything Model (SAM) facilitated by YOLOv8x-seg pretrained weights obtained after training manually annotated images dated 8 October, 21 October, and 29 October 2020. The automated annotations were archived in Pascal Visual Object Classes (PASCAL VOC) format. Seven classes, designated as Row 1 through Row 7, have been identified for crop labelling. Additional attributes such as individual crop ID and the repetitiveness of individual crop specimens are delineated in the Comma Separated Values (CSV) version of the manual annotation. This dataset not only furnishes annotation information but also assists in the refinement of various machine learning models, thereby contributing significantly to the field of smart agriculture. The transparency and reproducibility of the processes are ensured by making the utilized codes accessible. This research marks a significant stride in leveraging technology for vision-based crop growth monitoring.
Why it matches plant phenotyping methods作物の生育モニタリングを目的としたRGB画像・オルソモザイクの公開データセットで、手動／自動アノテーションと成長モデリングを中心的に扱っているため、植物フェノタイピング手法・データセットに該当する。
abstractThis research introduces an extensive dataset of unprocessed aerial RGB images and orthomosaics of Brassica oleracea crops
Reproduction assets foundThe paper's own GobhiSet dataset (raw RGB images, orthomosaics, manual/automatic annotations, binary masks) and Python analysis scripts are publicly deposited on Mendeley Data with an explicit direct URL and DOI.Dataset · public0137
Longitude: 14; 20; 47.7701
Data post-processing and storage location: Department of Engineering, University of Campania ‘Luigi Vanvitelli,’ Aversa, Italy
Coordinates: 40.96846317808221, 14.208207168044456
Data accessibility
Repository name: Mendeley Data
Data identification number: 10.17632/dcjjcwc5dh.3
Direct URL to data: https://data.mendeley.com/datasets/dcjjcwc5dh/3
1.
Value of the Data
•
This dataset is a collection of multi-date aerial imagery of the Brassica oleracea var. Botrytis crop [ 1 ]. The images were acquired between the first and seventh weeks after sowing the cauliflower, with the intention of observing its growth over this period. The images were annotated with two typOpen asset ↗Mendeley Data · 10.17632/dcjjcwc5dh.3lines:50-75Code / dataset availability confirmedOpenAlex · Crossref · checked 7 Sept 2026
Phenotyping of genetic resources is an important prerequisite for the selection of resistant varieties in breeding programs and research. Computer vision techniques have proven to be a useful tool for digital phenotyping of diseases of interest. One pathogen that is increasingly observed in Europe is Diplocarpon coronariae, which causes apple blotch disease. In this study, a high-throughput phenotyping method was established to evaluate genetic apple resources for susceptibility to D. coronariae. For this purpose, inoculation trials with D. coronariae were performed in a laboratory and images of infested leaves were taken 7, 9 and 13 days post inoculation. A pre-trained YOLOv5s model was chosen to establish the model, which was trained with an image dataset of 927 RGB images. The images had a size of 768 × 768 pixels and were divided into 738 annotated training images, 78 validation images and 111 background images without symptoms. The accuracy of symptom prediction with the trained model was 95%. These results indicate that our model can accurately and efficiently detect spots with acervuli on detached apple leaves. Object detection can therefore be used for digital phenotyping of detached leaf assays to assess the susceptibility to D. coronariae in a laboratory.
Why it matches plant phenotyping methodsリンゴ葉の病斑をYOLOv5で画像から検出し、病害感受性を評価する高スループット表現型計測法を確立・検証しており、フェノタイピング手法が中心である。
abstractIn this study, a high-throughput phenotyping method was established to evaluate genetic apple resources for susceptibility to D. coronariae.
Reproduction assets foundThe authors explicitly state that the image dataset used for model training (image_dataset_2023, 927 RGB images with 4167 annotations) and the YOLOv5s detection workflow with instructions are available in an open-source GitHub repository. This is a paper-specific, public, actionable asset directly reproducing the phenyDataset · publicThe image dataset for the model training is available in the open-source
GitHub repository (https://github.com/digijkizo/Apple_blotch_detection/tree/master,
accessed on 29 April 2024).Open asset ↗https://github.com/digijkizo/Apple_blotch_detection/tree/masterpdf-page:5 lines:1-59Code · publicThe image dataset for the model training and the detection workflow
with instructions are available in the open-source GitHub repository (https://github.com/digijkizo/
Apple_blotch_detection/tree/master, accessed on 29 April 2024).Open asset ↗pdf-page:10 lines:1-59Code / dataset availability confirmedCrossref · Europe PMC · checked 7 Sept 2026
Abstract Background Despite major efforts over the last decades, the rising demands of the growing global population makes it of paramount importance to increase crop yields and reduce losses caused by plant pathogens. One way to tackle this is to screen novel resistant genotypes and immunity-inducing agents, which must be conducted in a high-throughput manner. Results Colour-analyzer is a free web-based tool that can be used to rapidly measure the formation of lesions on leaves. Pixel colour values are often used to distinguish infected from healthy tissues. Some programs employ colour models, such as RGB, HSV or L*a*b*. Colour-analyzer uses two colour models, utilizing both HSV ( Hue, Saturation, Value ) and L*a*b* values. We found that the a* b* values of the L*a*b* colour model provided the clearest distinction between infected and healthy tissue, while the H and S channels were best to distinguish the leaf area from the background. Conclusion By combining the a* and b* channels to determine the lesion area, while using the H and S channels to determine the leaf area, Colour-analyzer provides highly accurate information on the size of the lesion as well as the percentage of infected tissue in a high throughput manner and can accelerate the plant immunity research field.
Why it matches plant phenotyping methods植物病斑面積と感染組織割合を画像から定量するウェブツールの開発であり、植物病害状態の表現型取得が中心的な貢献である。
abstractColour-analyzer is a free web-based tool that can be used to rapidly measure the formation of lesions on leaves.
Reproduction assets foundThe paper's authors publicly released both the Colour-analyzer web tool/code on GitHub and the datasets generated in the study, hosted in a publications subfolder of the same repository. Both are paper-specific, public, and actionable.Dataset · publicThe datasets generated are available at https://github.com/VittorioAccomazzi/LeafSize/tree/main/publications/A_new_dual_colour_model-based_imaging_tool .Open asset ↗VittorioAccomazzi/LeafSizelines:129-216Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Deep learning and computer vision, using remote sensing and drones, are 2 promising nondestructive methods for plant monitoring and phenotyping. However, their applications are infeasible for many crop systems under tree canopies, such as coffee crops, making it challenging to perform plant monitoring and phenotyping at a large spatial scale at a low cost. This study aims to develop a geographic-scale monitoring method for coffee cherry counting, supported by an artificial intelligence (AI)-powered citizen science approach. The approach uses basic smartphones to take a few pictures of coffee trees; 2,968 trees were investigated with 8,904 pictures in Junín and Piura (Peru), Cauca, and Quindío (Colombia) in 2022, with the help of nearly 1,000 smallholder coffee farmers. Then, we trained and validated YOLO (You Only Look Once) v8 for detecting cherries in the dataset in Peru. An average number of cherries per picture was multiplied by the number of branches to estimate the total number of cherries per tree. The model's performance in Peru showed an R 2 of 0.59. When the model was tested in Colombia, where different varieties are grown in different biogeoclimatic conditions, the model showed an R 2 of 0.71. The overall performance in both countries reached an R 2 of 0.72. The results suggest that the method can be applied to much broader scales and is transferable to other varieties, countries, and regions. To our knowledge, this is the first AI-powered method for counting coffee cherries and has the potential for a geographic-scale, multiyear, photo-based phenotypic monitoring for coffee crops in low-income countries worldwide.
Why it matches plant phenotyping methodsスマートフォン画像と深層学習でコーヒー果実数を推定する方法を開発・検証しており、植物形質の取得が研究の中心です。
abstractThis study aims to develop a geographic-scale monitoring method for coffee cherry counting, supported by an artificial intelligence (AI)-powered citizen science approach.
Reproduction assets foundThe paper's Data Availability statement explicitly deposits representative coffee cherry pictures (phenotyping image data) and the authors' Python analysis script in a public GitHub repository, matching the paper's smartphone-image cherry counting analysis. Other URLs (FAOSTAT, SENAMHI, IDEAM, Label Studio, YOLOv5 docsCode · publicSome representative pictures and the Python script used for the study are available at the GitHub repository: https://github.com/j-river1/Croppie .Open asset ↗j-river1/Croppielines:207-221Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
Abstract Background. Quantitative disease resistance (QR) is a complex, dynamic trait that is most reliably quantified in field-grown crops. Traditional disease assessments offer limited potential to disentangle the contributions of different components to overall QR at critical crop developmental stages. Yet, a better functional understanding of QR could greatly support a more targeted, knowledge-based selection for QR and improve predictions of seasonal epidemics. Image-based approaches together with advanced image processing methodologies recently emerged as valuable tools to standardize relevant disease assessments, increase measurement throughput, and describe diseases along multiple dimensions. Results. We present a simple, affordable, and easy-to-operate imaging set-up and imaging procedure for in-field acquisition of wheat leaf image sequences. The development of Septoria tritici blotch and leaf rusts was monitored over time via robust methods for symptom detection and segmentation, image registration, symptom tracking, and leaf- and symptom characterization. The average accuracy of the co-registration of images in a time series was approximately 5 pixels (~ 0.15 mm). Leaf-level symptom counts as well as individual symptom property measurements revealed stable patterns over time that were generally in excellent agreement with visual impressions. This provided strong evidence for the robustness of the methodology to variability typically inherent in field data. Contrasting patterns in lesion numbers and lesion expansion dynamics were observed across wheat genotypes. The number of separate infection events and average lesion size contributed to different degrees to overall disease intensity, possibly indicating distinct and complementary mechanisms of QR. Conclusions. The proposed methodology enables rapid, non-destructive, and reproducible measurement of several key epidemiological parameters under natural field conditions. Such data can support decomposition and functional understanding of QR as well as the parameterization, fine-tuning, and validation of epidemiological models. Details of pathogenesis can translate into specific symptom phenotypes resolvable using time series of high-resolution RGB images, which may improve biological understanding of plant-pathogen interactions as well as interactions in disease complexes.
Why it matches plant phenotyping methods圃場での画像取得、症状検出・追跡・セグメンテーション、葉および病斑形質の定量化手法を開発・検証しており、植物病害表現型の取得が研究の中心です。
abstractWe present a simple, affordable, and easy-to-operate imaging set-up and imaging procedure for in-field acquisition of wheat leaf image sequences.
Reproduction assets foundThe paper explicitly states that all image-processing/analysis code is available at the authors' GitHub repository (and-jonas/sympathique-wheat), and that a sample data set plus the trained reference mark detection model can be downloaded from the ETH research collection (doi 10.3929/ethz-b-000659812). Both are paper-Code · publicAll code related to the processing of image time series and leaf- and lesion-level trait extraction is available from https://github.com/and-jonas/sympathique-wheat for documentation.Open asset ↗and-jonas/sympathique-wheatlines:80-87Dataset · publicA sample data set and the trained reference mark detection model can be downloaded from ETH research collection at https://doi.org/10.3929/ethz-b-000659812 .Open asset ↗10.3929/ethz-b-000659812lines:80-87Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Image analysis is widely used in plant biology to determine growth rates and other phenotypic characters, with segmentation into foreground and background being a primary challenge. Statistical clustering and learning approaches can reduce the need for user input into this process, though these are computationally demanding, can generalise poorly and are not intuitive to end users. As such, simple strategies that rely on the definition of a range of target colors are still frequently adopted. These are limited by the geometries in color space that are implicit to their definition; i.e. thresholds define cuboid volumes and selected colors with a radius define spheroid volumes. A more comprehensive specification of target color is a hull, in color space, enclosing the set of colors in the image foreground. We developed AlGrow, a software tool that allows users to easily define hulls by clicking on the source image or a three-dimensional projection of its colors. We implemented convex hulls and then alpha-hulls, i.e. a limit applied to hull edge length, to support concave surfaces and disjoint color volumes. AlGrow also provides automated annotation by detecting internal circular markers, such as pot margins, and applies relative indexes to support movement. Analysis of publicly available Arabidopsis image series and metadata demonstrated effective automated annotation and mean Dice coefficients of >0.95 following training on only the first and last images in each series. AlGrow provides both graphical and command line interfaces and is released free and open-source with compiled binaries for the major operating systems.
Why it matches plant phenotyping methods植物画像から面積・成長などの表現型を抽出する画像解析ソフトウェアを開発し、Arabidopsis画像系列で性能検証しているため、方法が中心的である。
abstractWe developed AlGrow, a software tool that allows users to easily define hulls by clicking on the source image or a three-dimensional projection of its colors.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · public163 obtained from https://www.plant-phenotyping.org/datasets-home, as these are also able to demonstrateOpen asset ↗pdf-page:4 lines:1-55Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Abstract Being capable of accurately predicting morphological parameters of the plant weeks before achieving fruit maturation is of great importance in the production and selection of suitable ornamental pepper plants. The objective of this article is evaluating the feasibility and assessing the performance of CNN-based models using RGB images as input to forecast two morphological parameters: plant height and canopy diameter. To this end, four CNN-based models are proposed to predict these morphological parameters in four different scenarios: first, using as input a single image of the plant; second, using as input several images from different viewpoints of the plant acquired on the same date; third, using as input two images from two consecutive weeks; and fourth, using as input a set of images consisting of one image from each week up to the current date. The results show that it is possible to accurately predict both plant height and canopy diameter. The RMSE for a forecast performed 6 weeks in advance to the actual measurements was below 4.5 cm and 4.2 cm, respectively. When information from previous weeks is added to the model, better results can be achieved and as the prediction date gets closer to the assessment date the accuracy improves as well.
Why it matches plant phenotyping methodsRGB画像からCNNで植物体高と樹冠径を予測し、予測精度を評価する手法開発・検証が研究の中心であるため。
abstractThe objective of this article is evaluating the feasibility and assessing the performance of CNN-based models using RGB images as input to forecast two morphological parameters: plant height and canopy diameter.
Reproduction assets foundThe paper's curated dataset of morphological measurements (plant height, canopy diameter) and weekly RGB photographs of the 15 Capsicum accessions is explicitly deposited on Zenodo with a DOI matching an allowed URL. No author analysis code or trained model checkpoints are stated as publicly available.Dataset · publicThe resulting dataset, already curated, has been made publicly available at Zenodo (Alves Barroso et al., 2024 ).Open asset ↗Zenodolines:146-227Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Why it matches plant phenotyping methodsトウモロコシ種子の発芽・活力をRGB画像で推定するデータセットであり、植物表現型の画像取得・解析基盤が中心と判断できる。
titleAn RGB image dataset for seed germination prediction and vigor detection - maize.
Reproduction assets foundThe authors publicly deposited the paper's maize seed germination RGB image dataset (19,800 annotated images, PASCAL VOC XML labels) on Kaggle and IEEE DataPort, with explicit URLs in the text. No analysis code was deposited.Dataset · public. germinating:7042; 3. germinated:1936; 4. primary root:5087; 5. secondary root:17343. For easier download, we uploaded the 120-folder dataset separately, which was generated each hour. It could be accessed on the Kaggle public dataset titled Seed Vigor Detection RGB Image. The dataset is available at the following two address: https://www.kaggle.com/datasets/chengchengchen/seed-vigor-detection-rgb-image
http://ieee-dataport.org/documents/rgb-image-dataset-seed-germination-prediction-and-seed-vigor
3.5.
Seed viability object detection experiments
In order to verify the validity of the dataset, we perform experiments on the seeds vitality object detection using the two-stage object detection Open asset ↗Kaggle · Seed Vigor Detection RGB Imagelines:59-108Dataset · publict:17343. For easier download, we uploaded the 120-folder dataset separately, which was generated each hour. It could be accessed on the Kaggle public dataset titled Seed Vigor Detection RGB Image. The dataset is available at the following two address: https://www.kaggle.com/datasets/chengchengchen/seed-vigor-detection-rgb-image
http://ieee-dataport.org/documents/rgb-image-dataset-seed-germination-prediction-and-seed-vigor
3.5.
Seed viability object detection experiments
In order to verify the validity of the dataset, we perform experiments on the seeds vitality object detection using the two-stage object detection model Faster RCNN ( Girshick, 2015 ), the one-stage model SSD ( Liu et al., 20Open asset ↗rgb-image-dataset-seed-germination-prediction-and-seed-vigorlines:59-108Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This research delves into the intricate challenges confronting the agricultural sector, with a specialized focus on mitigating infections in tomato crops, particularly powdery mildew induced by the Leveillula Taurica pathogen. Tomatoes, renowned for their nutritional richness, are vital to global food security. However, conventional methodologies for disease detection exhibit both laborious processes and limited accuracy. In response to these challenges, this study advocates for an innovative fusion of hyperspectral imaging and deep learning methodologies to detect crop disease and its severity. The systematic workflow commenced with the curation of a dataset, involving the acquisition of live images through OpenCV, followed by conversion to RGB format and subsequent feature extraction utilizing a pre-trained visual geometry group (VGG-16) model for enhanced analysis. Sequentially, RGB images were transformed into simulated hyperspectral images (SHSI) leveraging a Neural Network generator model, offering a distinctive viewpoint on spectral information. This novel approach transcends conventional constraints by delivering a three-dimensional perspective, seamlessly integrating spatial and spectral dimensions for holistic data acquisition. The SHSI is further transmuted into a 3D visualization cube comprehensive grasp of spatial and spectral aspects encompassing spectral, spatial, and Haralick features. The research concludes with severity detection, categorized as low, moderate, or high, employing a Gaussian Mixture Model (GMM) and K-means for visualization.
Why it matches plant phenotyping methodsトマト葉の病害症状と重症度を、画像・疑似ハイパースペクトル・深層学習で直接推定する方法が研究の中心であり、植物病害フェノタイピングに該当する。
abstractthis study advocates for an innovative fusion of hyperspectral imaging and deep learning methodologies to detect crop disease and its severity
Reproduction assets foundThe paper uses two publicly available tomato leaf disease image datasets (Kaggle tomatoleaf; Google Drive dataset) as phenotyping inputs and provides the authors' analysis code (RGB-to-SHSI conversion, VGG-16 feature extraction, GMM/K-means severity pipeline) via a public Colab notebook listed in the Data Availability.Dataset · publicards in the field. In summary,
the compilation of our diverse dataset and the incorporation of benchmark datasets form the
foundation of this research endeavor, ensuring a thorough and principled evaluation of our proposed
approaches in the context of plant disease assessment [8].
2.1.1. Dataset 1:
This data was collected from "https://www.kaggle.com/datasets/kaus-tubhb999/tomatoleaf:
Access Date: 2023-10-25." This dataset includes diseases for tomato leaves such as "Septoria leaf spot,
tomato healthy, Spider mites Two-spotted spider mite, Early blight, Leaf Mold, Late blight, Tomato
Yellow Leaf Curl Virus, Bacterial spot, Target Spot, and Tomato mosaic virus." This collection has 984
photosOpen asset ↗kaggle · kaus-tubhb999/tomatoleafpdf-raw-page:7 lines:1-31Dataset · publicider mites Two-spotted spider mite, Early blight, Leaf Mold, Late blight, Tomato
Yellow Leaf Curl Virus, Bacterial spot, Target Spot, and Tomato mosaic virus." This collection has 984
photos in total.
2.1.2. Dataset 2:
Dataset-2 is also a publicly available one which can be downloaded and utilized from the drive
link provided. "https://drive.google.com/file/d/1DVy0LyUUfJciyo7BUFm1sHKSRdTVJgjF/view:
Access Date: 2023-10-25." This dataset is divided into seven classes: yellow curving, tomato mosaic,
Preprints.org (www.preprints.org) | NOT PEER-REVIEWED | Posted: 29 January 2024 doi:10.20944/preprints202401.1973.v1Open asset ↗pdf-raw-page:7 lines:1-31Code · public.B.; writing— S.K., M.M., B.B., Y.S., and A.B.; writing—review
and editing, M.M, B.B.; supervision, S.K., M.M., B.B. All authors have read and agreed to the published version
of the manuscript.
Funding: This research was partly funded by Zayed University, grant number 12091.
Data Availability Statement: Our code is available at
https://colab.research.google.com/drive/1wMvqsuZNY_lB2INmyWWqSZYm87wVckv0?usp=sharing
Acknowledgments: Not applicable.
Conflicts of Interest: The authors declare no conflict of interest. The funders had no role in the design of the
study; in the collection, analyses, or interpretation of data; in the writing of the manuscript, or in the decision to
publish the resultsOpen asset ↗pdf-raw-page:19 lines:1-52Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
Background: Plants are known to be infected by a wide range of pathogenic microbes. To study plant diseases caused by microbes, it is imperative to be able to monitor disease symptoms and microbial colonization in an quantitative and objective manner. In contrast to more traditional measures that use manual assignments of disease categories, image processing provides a more accurate and objective quantification of plant disease symptoms. Besides monitoring disease symptoms, it provides additional information on the spatial localization of pathogenic microbes in different plant tissues. Results: Here we report on an image analysis tool called ScAnalyzer to monitor disease symptoms and bacterial spread in Arabidopsis thaliana leaves. Detached leaves are assembled in a grid and scanned, which enables automated separation of individual samples. A pixel color threshold is used to segment healthy (green) from diseased (yellow) leaf area. The spread of luminescence-tagged bacteria is monitored via light-sensitive films, which are processed in a similar way as the leaf scans. We show that this tool is able to capture previously identified differences in susceptibility of the model plant A. thaliana to the bacterial pathogen Xanthomonas campestris pv. campestris. Moreover, we show that the ScAnalyzer pipeline provides a more detailed assessment of bacterial spread within plant leaves than previously used methods. Finally, by combining the disease symptom values with bacterial spread values from the same leaves, we show that bacterial spread precedes visual disease symptoms. Conclusion: Taken together, we present an automated script to monitor plant disease symptoms and microbial spread in A. thaliana leaves. The freely available software (https://github.com/MolPlantPathology/ScAnalyzer) has the potential to standardize the analysis of disease assays between different groups.
Why it matches plant phenotyping methods植物葉の病徴面積と病原体拡散を画像解析で自動定量するソフトウェアを開発・提示しており、植物表現型の取得・抽出が研究の中心である。
abstractimage processing provides a more accurate and objective quantification of plant disease symptoms
Reproduction assets foundThe preprint states that all code and raw images generated during the study are available at the authors' GitHub repository (https://github.com/MolPlantPathology/ScAnalyzer), which contains the ScAnalyzer Python/R analysis pipeline; the repository also hosts the printable leaf-sampling grid (grid.pdf) used as the phenpCode · publicThe code is available on GitHub ( https://github.com/MolPlantPathology/ScAnalyzer ).Open asset ↗MolPlantPathology/ScAnalyzerlines:85-109Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Repeated measurements of crop height to observe plant growth dynamics in real field conditions represent a challenging task. Although there are ways to collect data using sensors on UAV systems, proper data processing and analysis are the key to reliable results. As there is need for specialized software solutions for agricultural research and breeding purposes, we present here a fast algorithm ALFA for the processing of UAV LiDAR derived point-clouds to extract the information on crop height at many individual cereal field-plots at multiple time points. Seven scanning flights were performed over 3 blocks of experimental barley field plots between April and June 2021. Resulting point-clouds were processed by the new algorithm ALFA. The software converts point-cloud data into a digital image and extracts the traits of interest–the median crop height at individual field plots. The entire analysis of 144 field plots of dimension 80 x 33 meters measured at 7 time points (approx. 100 million LiDAR points) takes about 3 minutes at a standard PC. The Root Mean Square Deviation of the software-computed crop height from the manual measurement is 5.7 cm. Logistic growth model is fitted to the measured data by means of nonlinear regression. Three different ways of crop-height data visualization are provided by the software to enable further analysis of the variability in growth parameters. We show that the presented software solution is a fast and reliable tool for automatic extraction of plant height from LiDAR images of individual field-plots. We offer this tool freely to the scientific community for non-commercial use.
Why it matches plant phenotyping methodsUAV LiDAR点群から圃場区画ごとの作物高を自動抽出するソフトウェアと処理アルゴリズムを開発・検証しており、植物形質取得が研究の中心である。
abstractwe present here a fast algorithm ALFA for the processing of UAV LiDAR derived point-clouds to extract the information on crop height at many individual cereal field-plots at multiple time points.
Apple trees face various challenges during cultivation. Apple leaves, as the key part of the apple tree for photosynthesis, occupy most of the area of the tree. Diseases of the leaves can hinder the healthy growth of trees and cause huge economic losses to fruit growers. The prerequisite for precise control of apple leaf diseases is the timely and accurate detection of different diseases on apple leaves. Traditional methods relying on manual detection have problems such as limited accuracy and slow speed. In this study, both the attention mechanism and the module containing the transformer encoder were innovatively introduced into YOLOV5, resulting in YOLOV5-CBAM-C3TR for apple leaf disease detection. The datasets used in this experiment were uniformly RGB images. To better evaluate the effectiveness of YOLOV5-CBAM-C3TR, the model was compared with different target detection models such as SSD, YOLOV3, YOLOV4, and YOLOV5. The results showed that YOLOV5-CBAM-C3TR achieved mAP@0.5, precision, and recall of 73.4%, 70.9%, and 69.5% for three apple leaf diseases including Alternaria blotch, Grey spot, and Rust. Compared with the original model YOLOV5, the mAP 0.5increased by 8.25% with a small change in the number of parameters. In addition, YOLOV5-CBAM-C3TR can achieve an average accuracy of 92.4% in detecting 208 randomly selected apple leaf disease samples. Notably, YOLOV5-CBAM-C3TR achieved 93.1% and 89.6% accuracy in detecting two very similar diseases including Alternaria Blotch and Grey Spot, respectively. The YOLOV5-CBAM-C3TR model proposed in this paper has been applied to the detection of apple leaf diseases for the first time, and also showed strong recognition ability in identifying similar diseases, which is expected to promote the further development of disease detection technology.
Why it matches plant phenotyping methodsリンゴ葉の病徴を画像から検出・分類する新規深層学習モデルを開発し、複数モデルとの比較評価も行っており、植物病害状態の表現型抽出が中心である。
abstractresulting in YOLOV5-CBAM-C3TR for apple leaf disease detection.
Reproduction assets foundThe paper's apple leaf disease detection experiments rely on a publicly available apple leaf pathology image dataset hosted on Baidu AI Studio, which the authors explicitly cite with a URL. This is a paper-specific, public, actionable image dataset used directly for the paper's phenotyping (disease detection) analysis.Dataset · publicof similar apple leaf diseases. As far as we know, this is the first time that the YOLOV5-CBAM-C3TR model has been used for the identification and localization of apple leaf diseases.
2.
Materials and methods
2.1.
Datasets
In this study, the images were collected from the publicly available apple leaf pathology image dataset ( https://aistudio.baidu.com/datasetdetail/11591 ). Disease images in natural environments in the dataset were obtained from a real apple orchard in Yantai, Shandong Province, China. A total of 390 high-quality images of three common apple leaf diseases were selected for study in this dataset. However, the original images cannot be trained, validated, and tested directlyOpen asset ↗aistudio.baidu.com · 11591lines:33-78Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Introduction The cold stress is one of the most important factors for affecting production throughout year, so effectively evaluating frost damage is great significant to the determination of the frost tolerance in lettuce. Methods We proposed a high-throughput method to estimate lettuce FDI based on remote sensing. Red-Green-Blue (RGB) and multispectral images of open-field lettuce suffered from frost damage were captured by Unmanned Aerial Vehicle platform. Pearson correlation analysis was employed to select FDI-sensitive features from RGB and multispectral images. Then the models were established for different FDI-sensitive features based on sensor types and different groups according to lettuce colors using multiple linear regression, support vector machine and neural network algorithms, respectively. Results and discussion Digital number of blue and red channels, spectral reflectance at blue, red and near-infrared bands as well as six vegetation indexes (VIs) were found to be significantly related to the FDI of all lettuce groups. The high sensitivity of four modified VIs to frost damage of all lettuce groups was confirmed. The average accuracy of models were improved by 3% to 14% through a combination of multisource features. Color of lettuce had a certain impact on the monitoring of frost damage by FDI prediction models, because the accuracy of models based on green lettuce group were generally higher. The MULTISURCE-GREEN-NN model with R 2 of 0.715 and RMSE of 0.014 had the best performance, providing a high-throughput and efficient technical tool for frost damage investigation which will assist the identification of cold-resistant green lettuce germplasm and related breeding.
Why it matches plant phenotyping methodsUAV画像と機械学習を用いてレタスの霜害指数という植物状態を推定する高スループット手法を開発・評価しており、フェノタイピング手法が中心です。
abstractWe proposed a high-throughput method to estimate lettuce FDI based on remote sensing.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicData, models, or codes generated or used in the course of the study are available on GitHub at https://github.com/kwcnmm/predict-FDI .Open asset ↗kwcnmm/predict-FDIlines:908-915Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Deep learning plays a vital role in precise grapevine disease detection, yet practical applications for farmer assistance are scarce despite promising results. The objective of this research is to develop an intelligent approach, supported by user-friendly, open-source software named AI GrapeCare (Version 1, created by Osama Elsherbiny). This approach utilizes RGB imagery and hybrid deep networks for the detection and prevention of grapevine diseases. Exploring the optimal deep learning architecture involved combining convolutional neural networks (CNNs), long short-term memory (LSTM), deep neural networks (DNNs), and transfer learning networks (including VGG16, VGG19, ResNet50, and ResNet101V2). A gray level co-occurrence matrix (GLCM) was employed to measure the textural characteristics. The plant disease detection platform (PDD) created a dataset of real-life grape leaf images from vineyards to improve plant disease identification. A data augmentation technique was applied to address the issue of limited images. Subsequently, the augmented dataset was used to train the models and enhance their capability to accurately identify and classify plant diseases in real-world scenarios. The analyzed outcomes indicated that the combined CNN RGB -LSTM GLCM deep network, based on the VGG16 pretrained network and data augmentation, outperformed the separate deep network and nonaugmented version features. Its validation accuracy, classification precision, recall, and F-measure are all 96.6%, with a 93.4% intersection over union and a loss of 0.123. Furthermore, the software developed through the proposed approach holds great promise as a rapid tool for diagnosing grapevine diseases in less than one minute. The framework of the study shows potential for future expansion to include various types of trees. This capability can assist farmers in early detection of tree diseases, enabling them to implement preventive measures.
Why it matches plant phenotyping methodsブドウ葉のRGB画像から病害状態を推定する深層学習手法とデータセット、診断ソフトウェアを開発・評価しており、植物表現型取得が中心である。
abstractThe objective of this research is to develop an intelligent approach, supported by user-friendly, open-source software named AI GrapeCare
Reproduction assets foundThe authors publicly deposited the Python script, the trained hybrid deep network model, real-world grape disease sample images, and the standalone AI GrapeCare software on Google Drive. The PDD grape leaf image dataset (295 images) is also public at pdd.jinr.ru, but that URL is not in the allowed list, so only the verCode · publicface [ 32 ]. To ensure cross-platform compatibility, including Windows, Linux, and Mac OS, PyInstaller [ 33 ] was applied. The Python script, the hybrid deep network that was generated, grape disease samples from real-world conditions, and the stand-alone version of this software are all available for download on Google Drive ( https://drive.google.com/file/d/1uOVAMiFDWBZsm8U9alzSdSk2c-A8zWBN , accessed on 10 December 2023), packaged in a RAR file with a size of 1.03 GB. As depicted in the overarching flowchart ( Figure 7 ), the pseudo-code explains the establishment of the AI GrapeCare software and its associated functions. The software workflow is organized into five primary stages: (1) loOpen asset ↗Google Drivelines:148-246Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
High-throughput plant phenotype acquisition technologies have been extensively utilized in plant phenomics studies, leading to vast quantities of images and image-based phenotypic traits (i-traits) that are critically essential for accelerating germplasm screening, plant diseases identification and biotic & abiotic stress classification. Here, we present the Open Plant Image Archive (OPIA, https://ngdc.cncb.ac.cn/opia/), an open archive of plant images and i-traits derived from high-throughput phenotyping platforms. Currently, OPIA houses 56 datasets across 11 plants, comprising a total of 566 225 images with 2 417 186 labeled instances. Notably, it incorporates 56 i-traits of 93 rice and 105 wheat cultivars based on 18 644 individual RGB images, and these i-traits are further annotated based on the Plant Phenotype and Trait Ontology (PPTO) and cross-linked with GWAS Atlas. Additionally, each dataset in OPIA is assigned an evaluation score that takes account of image data volume, image resolution, and the number of labeled instances. More importantly, OPIA is equipped with useful tools for online image pre-processing and intelligent prediction. Collectively, OPIA provides open access to valuable datasets, pre-trained models, and phenotypic traits across diverse plants and thus bears great potential to play a crucial role in facilitating artificial intelligence-assisted breeding research.
Why it matches plant phenotyping methods植物画像と画像由来形質を収録する高スループット表現型データアーカイブであり、データセット、事前学習モデル、オンライン解析ツールを提供することが中心的な方法論的貢献である。
abstractHere, we present the Open Plant Image Archive (OPIA, https://ngdc.cncb.ac.cn/opia/), an open archive of plant images and i-traits derived from high-throughput phenotyping platforms.
Reproduction assets foundThe paper describes OPIA, an open archive of plant images, i-traits, and pre-trained models, freely available online with explicit download and trait pages. The archive itself is the paper-specific public asset containing the phenotyping images, i-trait values, and downloadable datasets.Dataset · publicdifferent types of imaging sensors (e.g. visible light, near-infrared, depth camera and chlorophyll fluorescence sensors) can be submitted via opia@big.ac.cn . Users can also submit a compiled dataset with relevant metadata ( Supplementary Figure S3 ). All image datasets can be freely downloaded in a compressed zip format from https://ngdc.cncb.ac.cn/opia/downloads , which contains label records of image data in diverse formats (e.g. RSML ( 30 ), JSON, TXT, XML, MAT, CSV or H5). Collectively, these online tools and data services are invaluable for plant phenotyping research and application.
Potential applications of datasets and i-traits
To highlight the potential applications of the in-hOpen asset ↗OPIAlines:148-156Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Coffee leaf disease is a problem that needs attention because it affects the quality and productivity of the coffee harvest and is detrimental to farmers. Therefore, a system is needed to identify types of coffee leaf diseases using artificial intelligence. There are four types of coffee leaf diseases, namely Miner leaf, Phoma leaf, Rust leaf, and Nodisease leaf. The research used the EfficientNet Architecture Convolutional Neural Network (CNN) method to detect types of disease on coffee leaves. This method was chosen because it is capable and reliable in processing digital images for pattern recognition. The dataset used is 1,464 images with dimensions of 2048 x 1024 pixels with RGB type which are divided into 1,264 training data and 400 testing data. Several architectures used in EfficientNet are EfficientNet B0, EfficientNet B1, EfficientNet B2, EfficientNet B3, EfficientNet B4. Parameters used are Lanczos resampling, Epoch 25, Learning Rate 0.0001, Loss Function Sparse Categorical Cross Entropy, Optimizer Adam. The results of training data testing, namely the CNN EfficientNet B1 Architecture Model method, got the best accuracy of 97% and a loss of 0.1328 and testing data testing got an accuracy of 0.97% and a loss of 0.1328. The architecture of the EfficientNet B1 model is better than other architectural models, namely VGG16, ResNet50, MobileNetv2, EfficientNet B0, EfficientNet B2, EfficientNet B3, EfficientNet B4, EfficientNet B5, EfficientNet B6, EfficientNet B7.
Why it matches plant phenotyping methodsコーヒー葉画像から病害状態を分類するCNN手法が研究の中心であり、植物病害表現型の画像ベース推定に該当する。
abstractThe research used the EfficientNet Architecture Convolutional Neural Network (CNN) method to detect types of disease on coffee leaves.
Reproduction assets foundThe paper's coffee leaf disease image dataset (1,464 RGB images of Miner, Phoma, Rust, and healthy leaves) is a public Kaggle dataset explicitly linked by the authors. No author analysis code or trained model checkpoints are reported as available.Dataset · publicIICS SEMNASTIK 2023 E-ISSN: 2774-5899 | P-ISSN: 2774-5880 ■ 61
pixels with RGB color mode, and the total number of images is 1.464, as detailed in Table 3. This dataset
can be accessed via the following link:
https://www.kaggle.com/datasets/gauravduttakiit/coffee-leaf-diseases.
Rust Phoma
Nodisease Miner
Figure 4. Types of Coffee Leaf Diseases
Table 3. Dataset details
Type Training Testing
Miner 332 128
No Disease 284 116
Phoma 388 96
Rust 260 60
Total 1.264 400
2.3 Evaluation
Evaluation is a critical step to obtain performance from model results [27][28]. This evaluation
process utilizes a matrix, aOpen asset ↗Kaggle · gauravduttakiit/coffee-leaf-diseasespdf-layout-page:4 lines:1-52Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
WheatRGB / grayscaleSeed / grainClassificationGrowth / development / phenology
Grain filling is essential for wheat yield formation, but is very susceptible to environmental stresses, such as high temperatures, especially in the context of global climate change. Grain RGB images include rich color, shape, and texture information, which can explicitly reveal the dynamics of grain filling. However, it is still challenging to further quantitatively predict the days after anthesis (DAA) from grain RGB images to monitor grain development. Results The WheatGrain dataset revealed dynamic changes in color, shape, and texture traits during grain development. To predict the DAA from RGB images of wheat grains, we tested the performance of traditional machine learning, deep learning, and few-shot learning on this dataset. The results showed that Random Forest (RF) had the best accuracy of the traditional machine learning algorithms, but it was far less accurate than all deep learning algorithms. The precision and recall of the deep learning classification model using Vision Transformer (ViT) were the highest, 99.03% and 99.00%, respectively. In addition, few-shot learning could realize fine-grained image recognition for wheat grains, and it had a higher accuracy and recall rate in the case of 5-shot, which were 96.86% and 96.67%, respectively. Materials and methods In this work, we proposed a complete wheat grain dataset, WheatGrain, which covers thousands of wheat grain images from 6 DAA to 39 DAA, which can characterize the complete dynamics of grain development. At the same time, we built different algorithms to predict the DAA, including traditional machine learning, deep learning, and few-shot learning, in this dataset, and evaluated the performance of all models. Conclusions To obtain wheat grain filling dynamics promptly, this study proposed an RGB dataset for the whole growth period of grain development. In addition, detailed comparisons were conducted between traditional machine learning, deep learning, and few-shot learning, which provided the possibility of recognizing the DAA of the grain timely. These results revealed that the ViT could improve the performance of deep learning in predicting the DAA, while few-shot learning could reduce the need for a number of datasets. This work provides a new approach to monitoring wheat grain filling dynamics, and it is beneficial for disaster prevention and improvement of wheat production.
Why it matches plant phenotyping methodsコムギ粒のRGB画像から登熟段階（日数）を推定する画像解析手法を開発・比較し、データセットとモデル性能を評価しており、表現型取得・推定が研究の中心である。
abstractTo predict the DAA from RGB images of wheat grains, we tested the performance of traditional machine learning, deep learning, and few-shot learning on this dataset.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産2件を確認しました。Code · publicThese traits were extracted via Python and OpenCV (a Python library), and the codes are available online at https://github.com/shem123456/wheat-grain-traits (accessed on 21 September 2023).Open asset ↗shem123456/wheat-grain-traitslines:61-116Code · publicFinally, the Siamese network with contrastive loss was built using PyTorch, and the configuration of its training was consistent with that of the deep learning model described above. The codes are available online at https://github.com/shem123456/grain-filling-classification (accessed on 21 September 2023).Open asset ↗shem123456/grain-filling-classificationlines:117-128Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 7 Sept 2026
Within-host spread of pathogens is an important process for the study of plant-pathogen interactions. However, the development of plant-pathogen lesions remains practically difficult to characterize beyond the common traits such as lesion area. Here, we address this question by combining image-based phenotyping with mathematical modelling. We consider the spread of Peyronellaea pinodes on pea stipules that were monitored daily with visible imaging. We assume that pathogen propagation on host-tissues can be described by the Fisher-KPP model where lesion spread depends on both a logistic growth and an homogeneous diffusion. Model parameters are estimated using a variational data assimilation approach on sets of registered images. This modelling framework is used to compare the spread of an aggressive isolate on two pea cultivars with contrasted levels of partial resistance. We show that the expected slower spread on the most resistant cultivar is actually due to a significantly lower diffusion coefficient. This study shows that combining imaging with spatial mechanistic models can offer a mean to disentangle some processes involved in host-pathogen interactions and further development may allow a better identification of quantitative traits thereafter used in genetics and ecological studies.
Why it matches plant phenotyping methods画像ベースの病斑追跡と時空間モデルを組み合わせ、病斑拡散パラメータを推定する手法が研究の中心であるため。
abstractHere, we address this question by combining image-based phenotyping with mathematical modelling.
Reproduction assets foundThe article cites two public Recherche Data Gouv deposits containing this paper's own phenotyping assets: the image sequences of growing lesions on pea stipules used for monitoring, and the segmentation outputs used for image-based phenotyping. Both are explicitly referenced with DOIs in the reference list.Dataset · publicImage sequences of growing lesions—Ascochyta blight of pea. Recherche Data Gouv; 2022. Available from: https://doi.org/10.57745/MQXKCP .Open asset ↗Recherche Data Gouv · 10.57745/MQXKCPlines:296-384Dataset · publicSegmentation of ascochyta blight symptoms on pea stipules. Recherche Data Gouv; 2022. Available from: https://doi.org/10.57745/5B1XGU .Open asset ↗Recherche Data Gouv · 10.57745/5B1XGUlines:296-384Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
ArabidopsisLaboratory / benchtopRGB / grayscaleRootTrackingRoot system architecture
Plant roots elongate when cells produced in the apical meristem enter a transient period of rapid expansion. To measure the dynamic process of root cell expansion in the elongation zone, we captured digital images of growing Arabidopsis roots with horizontal microscopes and analyzed them with a custom image analysis program (PatchTrack) designed to track the growth-driven displacement of many closely spaced image patches. Fitting a flexible logistics equation to patch velocities plotted versus position along the root axis produced the length of the elongation zone (mm), peak relative elemental growth rate (% h -1 ), the axial position of the peak (mm from the tip), and average root elongation rate (mm h -1 ). For a wild-type root, the average values of these kinematic traits were 0.52 mm, 23.7% h -1 , 0.35 mm, and 0.1 mm h -1 , respectively. We used the platform to determine the kinematic phenotypes of auxin transport mutants. The results support a model in which the PIN2 auxin transporter creates an area of expansion-suppressing, supraoptimal auxin concentration that ends 0.1 mm from the quiescent center (QC), and that ABCB4 and ABCB19 auxin transporters maintain expansion-limiting suboptimal auxin levels beginning approximately 0.5 mm from the QC. This study shows that PatchTrack can quantify dynamic root phenotypes in kinematic terms.
Why it matches plant phenotyping methodsPatchTrackによる画像解析で根の動的な伸長・細胞伸長形質を抽出する手法とプラットフォームを開発・実証しており、表現型取得が研究の中心です。
abstractanalyzed them with a custom image analysis program (PatchTrack) designed to track the growth-driven displacement of many closely spaced image patches.
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the authors' PatchTrack image-analysis code (used to produce the kinematic phenotyping measurements) on a public GitHub repository. No phenotype dataset or image deposit is stated.Code · publicThe computer code for PatchTrack is available at https://github.com/phytoMorph/phytoMorph_kinematics .Open asset ↗phytoMorph/phytoMorph_kinematicslines:96-111Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
The use of unmanned aerial vehicles (UAVs) has facilitated crop canopy monitoring, enabling yield prediction by integrating regression models. However, the application of UAV-based data to individual-level harvest weight prediction is limited by the effectiveness of obtaining individual features. In this study, we propose a method that automatically detects and extracts multitemporal individual plant features derived from UAV-based data to predict harvest weight. We acquired data from an experimental field sown with 1196 Chinese cabbage plants, using two cameras (RGB and multi-spectral) mounted on UAVs. First, we used three RGB orthomosaic images and an object detection algorithm to detect more than 95% of the individual plants. Next, we used feature selection methods and five different multi-temporal resolutions to predict individual plant weights, achieving a coefficient of determination (R 2 ) of 0.86 and a root mean square error (RMSE) of 436 g/plant. Furthermore, we achieved predictions with an R 2 greater than 0.72 and an RMSE less than 560 g/plant up to 53 days prior to harvest. These results demonstrate the feasibility of accurately predicting individual Chinese cabbage harvest weight using UAV-based data and the efficacy of utilizing multi-temporal features to predict plant weight more than one month prior to harvest.
Why it matches plant phenotyping methodsUAV画像から個体特徴を自動抽出し、収穫重量という植物形質を予測する手法が研究の中心であるため。
abstractwe propose a method that automatically detects and extracts multitemporal individual plant features derived from UAV-based data to predict harvest weight.
Reproduction assets foundThe paper's analysis code is publicly available on GitHub with explicit availability language. The UAV imagery (RGB/multispectral orthomosaics and point cloud data) is only available upon reasonable request from the corresponding author, so it does not qualify as a public asset.Code · publicAll code associated with the current study is available at: https://github.com/anaguilarar/CC_Weight_Prediction .Open asset ↗anaguilarar/CC_Weight_Predictionlines:155-233Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
The strong societal demand to reduce pesticide use and adaptation to climate change challenges the capacities of phenotyping new varieties in the vineyard. High-throughput phenotyping is a way to obtain meaningful and reliable information on hundreds of genotypes in a limited period. We evaluated traits related to growth in 209 genotypes from an interspecific grapevine biparental cross, between IJ119, a local genitor, and Divona, both in summer and in winter, using several methods: fresh pruning wood weight, exposed leaf area calculated from digital images, leaf chlorophyll concentration, and LiDAR-derived apparent volumes. Using high-density genetic information obtained by the genotyping by sequencing technology (GBS), we detected 6 regions of the grapevine genome [quantitative trait loci (QTL)] associated with the variations of the traits in the progeny. The detection of statistically significant QTLs, as well as correlations ( R 2 ) with traditional methods above 0.46, shows that LiDAR technology is effective in characterizing the growth features of the grapevine. Heritabilities calculated with LiDAR-derived total canopy and pruning wood volumes were high, above 0.66, and stable between growing seasons. These variables provided genetic models explaining up to 47% of the phenotypic variance, which were better than models obtained with the exposed leaf area estimated from images and the destructive pruning weight measurements. Our results highlight the relevance of LiDAR-derived traits for characterizing genetically induced differences in grapevine growth and open new perspectives for high-throughput phenotyping of grapevines in the vineyard.
Why it matches plant phenotyping methodsLiDARによるブドウ樹冠・剪定木体積の取得を、従来法との相関、遺伝率、QTL解析で評価しており、植物形質の高スループット計測法が研究の中心です。
abstractThe detection of statistically significant QTLs, as well as correlations ( R 2 ) with traditional methods above 0.46, shows that LiDAR technology is effective in characterizing the growth features of the grapevine.
Reproduction assets foundThe paper's Data availability statement provides a public repository deposit (DOI 10.57745/PETTGY) for the study data and an authors' public ImageJ script for estimating foliage coverage used in the RGB-image phenotyping analysis.Dataset · publictyping but also his expertise and helped with the manuscript review. D.M. supervised the program and helped with manuscript writing. É.D. supervised the whole study and wrote the first draft of the manuscript.
Competing interests: The authors declare that they have no competing interests.
Data availability
Data are available at https://doi.org/10.57745/PETTGY . ImageJ script for estimating foliage coverage: https://forgemia.inra.fr/eric.duchene/image-analysis-scripts/-/blob/main/FoliageCoverage_PC_EN.txt
Supplementary Materials
Supplementary 1
Fig. S1
Tables S1 to S5
Click here for additional data file.
References
1.
Carvalho
LC , Goncalves
EF ,
da
Silva
JM , Costa
JM
.
Potential phOpen asset ↗10.57745/PETTGY · 10.57745/PETTGYlines:825-1015Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 15 Sept 2026
BACKGROUND: Object detection, size determination, and colour detection of images are tools commonly used in plant science. Key examples of this include identification of ripening stages of fruit such as tomatoes and the determination of chlorophyll content as an indicator of plant health. While methods exist for determining these important phenotypes, they often require proprietary software or require coding knowledge to adapt existing code. RESULTS: We provide a set of free and open-source Python scripts that, without any adaptation, are able to perform background correction and colour correction on images using a ColourChecker chart. Further scripts identify objects, use an object of known size to calibrate for size, and extract the average colour of objects in RGB, Lab, and YUV colour spaces. We use two examples to demonstrate the use of these scripts. We show the consistency of these scripts by imaging in four different lighting conditions, and then we use two examples to show how the scripts can be used. In the first example, we estimate the lycopene content in tomatoes (Solanum lycopersicum) var. Tiny Tim using fruit images and an exponential model to predict lycopene content. We demonstrate that three different cameras (a DSLR camera and two separate mobile phones) are all able to model lycopene content. The models that predict lycopene or chlorophyll need to be adjusted depending on the camera used. In the second example, we estimate the chlorophyll content of basil (Ocimum basilicum) using leaf images and an exponential model to predict chlorophyll content. CONCLUSION: A fast, cheap, non-destructive, and inexpensive method is provided for the determination of the size and colour of plant materials using a rig consisting of a lightbox, camera, and colour checker card and using free and open-source scripts that run in Python 3.8. This method accurately predicted the lycopene content in tomato fruit and the chlorophyll content in basil leaves.
Why it matches plant phenotyping methods植物画像からサイズ・色を抽出し、果実リコピンや葉クロロフィルを推定するオープンソース手法と撮像系を開発・検証しており、表現型取得が研究の中心である。
abstractWe provide a set of free and open-source Python scripts that, without any adaptation, are able to perform background correction and colour correction on images using a ColourChecker chart.
Reproduction assets foundThe authors provide public, paper-specific assets: the PlantSizeClr Python scripts on GitHub, a snapshot of all scripts and data on OSF, and all data generated for the manuscript on the University of Sheffield data repository.Code · publicThe example lightbox contains LED lighting; this could be further improved by using bulbs that are closer to standard illuminants (D65 for sRGB).
An object of known size (coins work well).
Software: Python 3.8.
Python packages: List of packages and their versions used available in Additional file 1 : S0.
Custom Python Scripts: https://github.com/HarryCWright/PlantSizeClr
Snapshot of all scripts and data is available on Open Science Framework: www.doi.org/10.17605/OSF.IO/QAYMU
Optional for extraction of lycopene: acetone, high purity ethanol, hexane deionised water and a UV/vis spectrophotometerOpen asset ↗HarryCWright/PlantSizeClrlines:34-50Code · publicSnapshot of all scripts and data is available on Open Science Framework: www.doi.org/10.17605/OSF.IO/QAYMUOpen asset ↗OSF.IO/QAYMU · 10.17605/OSF.IO/QAYMUlines:34-50Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
Prescribed burning and pyric herbivory play pivotal roles in mitigating wildfire risks, underscoring the imperative of consistent biomass monitoring for assessing fuel load reductions. Drone-derived surface models promise uninterrupted biomass surveillance but require complex photogrammetric processing. In a Mediterranean mountain shrubland burning experiment, we refined a Structure from Motion (SfM) and Multi-View Stereopsis (MVS) workflow to diminish biases in 3D modeling and RGB drone imagery-based surface reconstructions. Given the multitude of SfM-MVS processing alternatives, stringent quality oversight becomes paramount. We executed the following steps: (i) calculated Root Mean Square Error (RMSE) between Global Navigation Satellite System (GNSS) checkpoints to assess SfM sparse cloud optimization during georeferencing; (ii) evaluated elevation accuracy by comparing the Mean Absolute Error (MAE) of six surface and thirty terrain clouds against GNSS readings and known box dimensions; and (iii) complemented a dense cloud quality assessment with density metrics. Balancing overall accuracy and density, we selected surface and terrain cloud versions for high-resolution (2 cm pixel size) and accurate (DSM, MAE = 57 mm; DTM, MAE = 48 mm) Digital Elevation Model (DEM) generation. These DEMs, along with exceptional height and volume models (height, MAE = 12 mm; volume, MAE = 909.20 cm3) segmented by reference box true surface area, substantially contribute to burn impact assessment and vegetation monitoring in fire management systems.
Why it matches plant phenotyping methodsドローン画像のSfM-MVS処理を改良・精度検証し、植生の高さ・体積・バイオマス監視に用いる手法が研究の中心である。
abstractwe refined a Structure from Motion (SfM) and Multi-View Stereopsis (MVS) workflow to diminish biases in 3D modeling and RGB drone imagery-based surface reconstructions.
Reproduction assets foundThe paper's SfM sparse-cloud optimization analysis was implemented as a Python module in the authors' public MetashapeTools repository (co-author Marvin Ludwig), explicitly linked in the text. The bl_gimbal repository is only a gimbal hardware controller, not phenotyping analysis, and the Data Availability Statement isCode · publicencing process of the sparse cloud [50]. This approach focuses on minimizing the error of
georeferencing check points within the sparse cloud by identifying the optimal filter pa-
rameters. Consequently, only tie points with low reprojection errors are used. This appli-
cation is available as a Python module for MetashapeTools (https://github.com/en-vima/MetashapeTools/, accessed on 30 August 2023).
An orthomosaic is a detailed and geometrically accurate image of an area, composed
of multiple photos that have been orthorectified. Within this framework, once the
Figure 4. (a) Illustrates the optimized workflow for the Metashape Structure from Motion (SfM)
(Ludwig et al, 2020 [50]). (b) RepresOpen asset ↗en-vima/MetashapeToolspdf-raw-page:7 lines:1-31Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Measurements of rice physical traits, such as length, width, and percentage of filled/unfilled grains, are essential steps of rice breeding. A new approach for measuring the physical traits of rice grains for breeding purposes was presented in this study, utilizing image processing techniques. Backlight photography was used to capture a grayscale image of a group of rice grains, which was then analyzed using a clustering algorithm to differentiate between filled and unfilled grains based on their grayscale values. The impact of backlight intensity on the accuracy of the method was also investigated. The results show that the proposed method has excellent accuracy and high efficiency. The mean absolute percentage error of the method was 0.24% and 1.36% in calculating the total number of grain particles and distinguishing the number of filled grains, respectively. The grain size was also measured with a little margin of error. The mean absolute percentage error of grain length measurement was 1.11%, while the measurement error of grain width was 4.03%. The method was found to be highly accurate, non-destructive, and cost-effective when compared to conventional methods, making it a promising approach for characterizing physical traits for crop breeding.
Why it matches plant phenotyping methodsイネ籾の長さ・幅・充実度を画像処理で測定する方法を開発し、精度とバックライト条件の影響を検証しており、植物表現型取得が中心です。
abstractA new approach for measuring the physical traits of rice grains for breeding purposes was presented in this study, utilizing image processing techniques.
Reproduction assets foundThe paper's phenotype reference measurements (grain counts, filled/unfilled counts, and grain sizes for the validation experiments) are reported in Appendices A–C, which are included in the article's supplementary material, publicly available at the Frontiers supplementary-material URL. No author analysis code or imageSupplement · publicof their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Supplementary material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2023.1213486/full#supplementary-material
Click here for additional data file.
References
Al-Tam F., Adam H., Anjos A. D., Lorieux M., Larmande P., Ghesquière A., et al. (2013). P-TRAP: a panicle trait phenotyping tool. BMC Plant Biol.
13 (1), 1–14. doi: 10.1186/1471-2229-13-122Open asset ↗lines:182-208Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Nitrogen (N) is one of the key inputs in maize production applied in the form of fertilizers. Nitrogen deficiency during the vegetation period leads to lower yields since N is utilized in proteins and enzymes that enable important biochemical processes such as photosynthesis. Nitrogen deficiency leads to specific symptoms that eventually become visible to the naked eye during vegetation. Our hypothesis was that N deficiency can be detected from maize RGB images in parametric process such as a deep neural network. The aim of the reported dataset is to optimize the usage of N in the farmer's fields and accordingly, reduce its environmental footprint. This dataset contains 1200 images of maize canopy from field trials, annotated by an expert from an agricultural institution. The field trials included three levels of N fertilization: N0 without N fertilization, N75 with 75 kg of added N fertilizer, and NFull with 136 kg of added N fertilizer. For each fertilizer level, 400 plots were created with 238 different maize genotypes, resulting in a total of 1200 plots. Images were taken with a tripod mounted DSLR camera, aperture priority set to f/8 and sensor sensitivity set to ISO400. Images were taken at a 45° angle to each plot. This dataset can be useful to both researchers, data scientists and agronomists, especially in the context of emerging technologies in precision agriculture, such as robotics, 5G networks and unmanned aerial vehicle (UAV). The dataset is one of the first publicly accessible datasets of maize canopy images under different N fertilization levels and represents a valuable public resource for development of machine learning models for in-season detection of N deficiency in maize.
Why it matches plant phenotyping methodsトウモロコシの画像から窒素欠乏という植物状態を検出するための注釈付き公開画像データセットであり、機械学習による表現型抽出の基盤として方法論的に中心的です。
abstractThis dataset contains 1200 images of maize canopy from field trials, annotated by an expert from an agricultural institution.
Reproduction assets foundThe paper is a Data in Brief describing a public Mendeley Data deposit of 1200 annotated maize canopy RGB images across three N fertilization levels, plus a preprocessing iPython notebook (TensorFlow_preprocessing.ipynb) included in the same repository. This is a paper-specific, publicly and freely downloadable phenopyDataset · publicers are not. Images at different field rows were taken randomly between 7:30 and 11:00 a.m.
Data source location
•
Institution: Agricultural Institute Osijek (AIO)
•
City/Town/Region: Osijek
•
Country: Croatia
Data accessibility
Repository name: Mendeley Data
Data identification number: 10.17632/g7xnn2bm4g.1
Direct URL to data: https://data.mendeley.com/datasets/g7xnn2bm4g/1
Instructions for accessing these data: Data are freely and anonymously downloadable from the link. Images are compressed into a single .zip file. Additionally, iPython notebook ‘TensorFlow_preprocessing.ipynb’ and ‘requirements.txt’ cover data preprocessing and required libraries to run the scripts.
1.
Value of the Data
Open asset ↗Mendeley Data · 10.17632/g7xnn2bm4g.1lines:1-58Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 10 Sept 2026
The first draft of the Arabidopsis genome was released more than 20 years ago and despite intensive molecular research, more than 30% of Arabidopsis genes remained uncharacterized or without an assigned function. This is in part due to gene redundancy within gene families or the essential nature of genes, where their deletion results in lethality (i.e., the dark genome). High-throughput plant phenotyping (HTPP) offers an automated and unbiased approach to characterize subtle or transient phenotypes resulting from gene redundancy or inducible gene silencing; however, access to commercial HTPP platforms remains limited. Here we describe the design and implementation of OPEN leaf, an open-source phenotyping system with cloud connectivity and remote bilateral communication to facilitate data collection, sharing and processing. OPEN leaf, coupled with our SMART imaging processing pipeline was able to consistently document and quantify dynamic changes at the whole rosette level and leaf-specific resolution when plants experienced changes in nutrient availability. Our data also demonstrate that VIS sensors remain underutilized and can be used in high-throughput screens to identify and characterize previously unidentified phenotypes in a leaf-specific time-dependent manner. Moreover, the modular and open-source design of OPEN leaf allows seamless integration of additional sensors based on users and experimental needs.
Why it matches plant phenotyping methodsOPEN leafは、葉単位の動的表現型を取得・定量するオープンソース撮像プラットフォームと画像処理パイプラインの設計・実装を主題としており、植物フェノタイピング手法が中心である。
abstractHere we describe the design and implementation of OPEN leaf, an open-source phenotyping system with cloud connectivity and remote bilateral communication to facilitate data collection, sharing and processing.
Reproduction assets foundThe paper's SMART image-analysis pipeline (used for all rosette and leaf-specific phenotyping measurements in this study) is explicitly stated to be publicly available as source code on GitHub and as a prepackaged Docker container, with authors' URLs given in the text.Code · public161 pipeline used are available as source code on GitHub (https://github.com/Computational-Plant-Open asset ↗Computational-Plant-pdf-page:6 lines:1-34Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
Rice is a vital food crop that feeds most of the global population. Cultivating high-yielding and superior-quality rice varieties has always been a critical research direction. Rice grain-related traits can be used as crucial phenotypic evidence to assess yield potential and quality. However, the analysis of rice grain traits is still mainly based on manual counting or various seed evaluation devices, which incur high costs in time and money. This study proposed a high-precision phenotyping method for rice panicles based on visible light scanning imaging and deep learning technology, which can achieve high-throughput extraction of critical traits of rice panicles without separating and threshing rice panicles. The imaging of rice panicles was realized through visible light scanning. The grains were detected and segmented using the Faster R-CNN-based model, and an improved Pix2Pix model cascaded with it was used to compensate for the information loss caused by the natural occlusion between the rice grains. An image processing pipeline was designed to calculate fifteen phenotypic traits of the on-panicle rice grains. Eight varieties of rice were used to verify the reliability of this method. The R 2 values between the extraction by the method and manual measurements of the grain number, grain length, grain width, grain length/width ratio and grain perimeter were 0.99, 0.96, 0.83, 0.90 and 0.84, respectively. Their mean absolute percentage error (MAPE) values were 1.65%, 7.15%, 5.76%, 9.13% and 6.51%. The average imaging time of each rice panicle was about 60 seconds, and the total time of data processing and phenotyping traits extraction was less than 10 seconds. By randomly selecting one thousand grains from each of the eight varieties and analyzing traits, it was found that there were certain differences between varieties in the number distribution of thousand-grain length, thousand-grain width, and thousand-grain length/width ratio. The results show that this method is suitable for high-throughput, non-destructive, and high-precision extraction of on-panicle grains traits without separating. Low cost and robust performance make it easy to popularize. The research results will provide new ideas and methods for extracting panicle traits of rice and other crops.
Why it matches plant phenotyping methodsイネ穂上粒の形態形質を画像・深層学習で抽出する手法を開発し、手動測定との比較で検証しており、表現型取得が研究の中心である。
abstractThis study proposed a high-precision phenotyping method for rice panicles based on visible light scanning imaging and deep learning technology
Reproduction assets foundThe paper's data availability statement explicitly points to a public GitHub repository (BME-PhenoTeam/Method-for-on-panicle-rice-grain-detection) hosting the study's datasets, which per the statement contain the paper's rice panicle images and phenotyping resources. No separate trained-model checkpoint or analysis URLDataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://github.com/BME-PhenoTeam/Method-for-on-panicle-rice-grain-detection .Open asset ↗BME-PhenoTeam/Method-for-on-panicle-rice-grain-detectionlines:521-553Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Defect segmentation of apples is an important task in the agriculture industry for quality control and food safety. In this paper, we propose a deep learning approach for the automated segmentation of apple defects using convolutional neural networks (CNNs) based on a U-shaped architecture with skip-connections only within the noise reduction block. An ad-hoc data synthesis technique has been designed to increase the number of samples and at the same time to reduce neural network overfitting. We evaluate our model on a dataset of multi-spectral apple images with pixel-wise annotations for several types of defects. In this paper, we show that our proposal outperforms in terms of segmentation accuracy general-purpose deep learning architectures commonly used for segmentation tasks. From the application point of view, we improve the previous methods for apple defect segmentation. A measure of the computational cost shows that our proposal can be employed in real-time (about 100 frame-per-second on GPU) and in quasi-real-time (about 7/8 frame-per-second on CPU) visual-based apple inspection. To further improve the applicability of the method, we investigate the potential of using only RGB images instead of multi-spectral images as input images. The results prove that the accuracy in this case is almost comparable with the multi-spectral case.
Why it matches plant phenotyping methodsリンゴ果実の欠陥を画像から画素単位で抽出する深層学習手法を開発・評価しており、植物器官の状態（欠陥）取得が中心的な方法論的貢献である。
abstractwe propose a deep learning approach for the automated segmentation of apple defects using convolutional neural networks (CNNs)
Reproduction assets foundThe paper's authors publicly release the analysis code for their apple defect segmentation experiments via a GitHub repository, explicitly stated in the text. The apple image dataset itself is cited prior work (Kleynen et al.) and no separate dataset deposit by these authors is stated.Code · publicwe investigate the feasibility of using RGB images exclusively as input data instead of multi-spectral images. Encouragingly, the results show that the accuracy achieved in this scenario is nearly comparable to the multi-spectral approach. The experiments can be reproduced using the code made available at the following address: https://github.com/cimice15/Quasi_real-time_apple_defect_segmentation (accessed on 8 September 2023).
The paper is organized as follows: Section 2 presents related works, Section 3 presents the database used in our experiments and the method we propose. Section 4 presents evaluation metrics and experimental setups. Finally Section 5 discusses results of the proposed mOpen asset ↗cimice15/Quasi_real-time_apple_defect_segmentationlines:40-49Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 15 Sept 2026
Among seed attributes, weight is one of the main factors determining the soybean harvest index. Recently, the focus of soybean breeding has shifted to improving seed size and weight for crop optimization in terms of seed and oil yield. With recent technological advancements, there is an increasing application of imaging sensors that provide simple, real-time, non-destructive, and inexpensive image data for rapid image-based prediction of seed traits in plant breeding programs. The present work is related to digital image analysis of seed traits for the prediction of hundred-seed weight (HSW) in soybean. The image-based seed architectural traits (i-traits) measured were area size (AS), perimeter length (PL), length (L), width (W), length-to-width ratio (LWR), intersection of length and width (IS), seed circularity (CS), and distance between IS and CG (DS). The phenotypic investigation revealed significant genetic variability among 164 soybean genotypes for both i-traits and manually measured seed weight. Seven popular machine learning (ML) algorithms, namely Simple Linear Regression (SLR), Multiple Linear Regression (MLR), Random Forest (RF), Support Vector Regression (SVR), LASSO Regression (LR), Ridge Regression (RR), and Elastic Net Regression (EN), were used to create models that can predict the weight of soybean seeds based on the image-based novel features derived from the Red-Green-Blue (RGB)/visual image. Among the models, random forest and multiple linear regression models that use multiple explanatory variables related to seed size traits (AS, L, W, and DS) were identified as the best models for predicting seed weight with the highest prediction accuracy (coefficient of determination, R 2= 0.98 and 0.94, respectively) and the lowest prediction error, i.e., root mean square error (RMSE) and mean absolute error (MAE). Finally, principal components analysis (PCA) and a hierarchical clustering approach were used to identify IC538070 as a superior genotype with a larger seed size and weight. The identified donors/traits can potentially be used in soybean improvement programs
Why it matches plant phenotyping methodsRGB画像から種子形態形質を抽出し、機械学習で種子重量を予測する画像ベース表現型解析が研究の中心である。
abstractThe present work is related to digital image analysis of seed traits for the prediction of hundred-seed weight (HSW) in soybean.
Reproduction assets foundThe paper's image-based seed architectural trait (i-trait) measurements and hundred-seed weight data for 164 soybean accessions are stated to be included in the article's Supplementary Material (e.g., Supplementary Table 1 of genotypes and trait data), publicly available at the Frontiers supplementary-material URL. No专Supplement · publicof their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Supplementary material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2023.1206357/full#supplementary-material
Click here for additional data file.
Click here for additional data file.
References
Abdelhakim L. O. A., Rosenqvist E., Wollenweber B., Spyroglou I., Ottosen C. O., Panzarová K. (2021). Investigating combined drought-and heat stress effects in wheat under controlled conditions Open asset ↗lines:434-465Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Conventional forest inventories are labour-intensive. This limits the spatial extent and temporal frequency at which woody vegetation is usually monitored. Remote sensing provides cost-effective solutions that enable extensive spatial coverage and high sampling frequency. Recent studies indicate that convolutional neural networks (CNNs) can classify woody forests, plantations, and urban vegetation at the species level using consumer-grade unmanned aerial vehicle (UAV) imagery. However, whether such an approach is feasible in species-rich savanna ecosystems remains unclear. Here, we tested whether small data sets of high-resolution RGB orthomosaics suffice to train U-Net, FC-DenseNet, and DeepLabv3 + in semantic segmentation of savanna tree species. We trained these models on an 18-ha training area and explored whether models could be transferred across space and time. These models could recognise trees in adjacent (mean F1-Score = 0.68) and distant areas (mean F1-Score = 0.61) alike. Over time, a change in plant morphology resulted in a decrease of model accuracy. Our results show that CNN-based tree mapping using consumer-grade UAV imagery is possible in savanna ecosystems. Still, larger and more heterogeneous data sets can further improve model robustness to capture variation in plant morphology across time and space.
Why it matches plant phenotyping methodsUAV画像とCNNによる樹木の空間的な認識・セグメンテーション手法を開発・評価し、植物形態の時空間変動に対する頑健性も検証しているため、手法が中心である。
abstractwe tested whether small data sets of high-resolution RGB orthomosaics suffice to train U-Net, FC-DenseNet, and DeepLabv3 + in semantic segmentation of savanna tree species.
Reproduction assets foundThe paper's authors explicitly state that all code used for model training and statistical analyses is publicly available on GitHub at the authors' repository (LELENet), which matches an allowed URL. This is the paper-specific analysis code for the CNN semantic segmentation of savanna tree species. No separate public影像Code · publicCode availability
All code used during model training and statistical analyses is accessible at: https://github.com/ManuelPopp/LELENet .Open asset ↗ManuelPopp/LELENetlines:136-196Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
Background Rust is a damaging disease affecting vital crops, including pea, and identifying highly resistant genotypes remains a challenge. Accurate measurement of infection levels in large germplasm collections is crucial for finding new resistance sources. Current evaluation methods rely on visual estimation of disease severity and infection type under field or controlled conditions. While they identify some resistance sources, they are error-prone and time-consuming. An image analysis system proves useful, providing an easy-to-use and affordable way to quickly count and measure rust-induced pustules on pea samples. This study aimed to develop an automated image analysis pipeline for accurately calculating rust disease progression parameters under controlled conditions, ensuring reliable data collection. Results A highly efficient and automatic image-based method for assessing rust disease in pea leaves was developed using R. The method's optimization and validation involved testing different segmentation indices and image resolutions on 600 pea leaflets with rust symptoms. The approach allows automatic estimation of parameters like pustule number, pustule size, leaf area, and percentage of pustule coverage. It reconstructs time series data for each leaf and integrates daily estimates into disease progression parameters, including latency period and area under the disease progression curve. Significant variation in disease responses was observed between genotypes using both visual ratings and image-based analysis. Among assessed segmentation indices, the Normalized Green Red Difference Index (NGRDI) proved fastest, analysing 600 leaflets at 60% resolution in 62 s with parallel processing. Lin's concordance correlation coefficient between image-based and visual pustule counting showed over 0.98 accuracy at full resolution. While lower resolution slightly reduced accuracy, differences were statistically insignificant for most disease progression parameters, significantly reducing processing time and storage space. NGRDI was optimal at all time points, providing highly accurate estimations with minimal accumulated error. Conclusions A new image-based method for monitoring pea rust disease in detached leaves, using RGB spectral indices segmentation and pixel value thresholding, improves resolution and precision. It rapidly analyses hundreds of images with accuracy comparable to visual methods and higher than other image-based approaches. This method evaluates rust progression in pea, eliminating rater-induced errors from traditional methods. Implementing this approach to evaluate large germplasm collections will improve our understanding of plant-pathogen interactions and aid future breeding for novel pea cultivars with increased rust resistance.
Why it matches plant phenotyping methodsエンドツーエンドのRGB画像解析パイプラインを開発・最適化・検証し、エンドウ葉のさび病症状と病勢進展を定量化する方法が研究の中心である。
abstractThis study aimed to develop an automated image analysis pipeline for accurately calculating rust disease progression parameters under controlled conditions, ensuring reliable data collection.
Reproduction assets foundThe authors deposited the R analysis script and the 600 pea leaflet images used in this rust phenotyping study in a public Zenodo repository, explicitly cited in the Data Availability statement and reference list.Dataset · publicThe datasets generated during and/or analysed during the current study are available in the Zenodo repository, https://doi.org/10.5281/zenodo.7991462 [ 93 ].Open asset ↗Zenodo · 10.5281/zenodo.7991462lines:147-229Code / dataset availability confirmedEurope PMC · OpenAlex · checked 13 Sept 2026
Tree height is a crucial structural parameter in forest inventory as it provides a basis for evaluating stock volume and growth status. In recent years, close-range photogrammetry based on smartphone has attracted attention from researchers due to its low cost and non-destructive characteristics. However, such methods have specific requirements for camera angle and distance during shooting, and pre-shooting operations such as camera calibration and placement of calibration boards are necessary, which could be inconvenient to operate in complex natural environments. We propose a tree height measurement method based on three-dimensional (3D) reconstruction. Firstly, an absolute depth map was obtained by combining ARCore and MidasNet. Secondly, Attention-UNet was improved by adding depth maps as network input to obtain tree mask. Thirdly, the color image and depth map were fused to obtain the 3D point cloud of the scene. Then, the tree point cloud was extracted using the tree mask. Finally, the tree height was measured by extracting the axis-aligned bounding box of the tree point cloud. We built the method into an Android app, demonstrating its efficiency and automation. Our approach achieves an average relative error of 3.20% within a shooting distance range of 2-17 m, meeting the accuracy requirements of forest survey.
Why it matches plant phenotyping methodsスマートフォン画像・深度情報と3D再構成を用いて樹高という植物構造形質を自動測定する手法を開発し、誤差評価とAndroidアプリ化まで行っているため、植物フェノタイピング手法が中心である。
abstractWe propose a tree height measurement method based on three-dimensional (3D) reconstruction.
Reproduction assets foundThe paper's Data Availability Statement explicitly provides two paper-specific public assets: the source code of the TreeHeight prototype app on GitHub and the authors' annotated tree image dataset (300 annotated images augmented to 1000 pairs of color images, relative depth maps, and tree masks) on Google Drive. Both,Code · publicThe source code of the prototype app is publicly available on GitHub at https://github.com/LisaShen0509/Tree_Height_Measurement (accessed on 27 July 2023).Open asset ↗LisaShen0509/Tree_Height_Measurementlines:432-615Dataset · publicTree image dataset is available at https://drive.google.com/file/d/1kG6LWMOAiA2KvGF_suZ5cG_4C-udUV0m/view?usp=sharing (accessed on 27 July 2023).Open asset ↗lines:432-615Code / dataset availability confirmedCrossref · checked 8 Sept 2026
Early diagnosis of rice disease is important because it poses a considerable threat to agricultural productivity as well as the global food security of the world. It is challenging to obtain more reliable outcomes based on the percentage of RGB value using image processing outcomes for rice disease detections and classifications in the agricultural field. Machine learning, especially with a Convolutional Neural Network (CNN), is a great tool to overcome this problem. But the utilization of deep learning techniques often necessitates high-performance computing devices, costly GPUs and extensive machine infrastructure. As a result, this significantly raises the overall expenses for users. Therefore, the demand for smaller CNN models becomes particularly pronounced, especially in embedded systems, robotics and mobile applications. These domains require real-time performance and minimal computational overhead, making smaller CNN models highly desirable due to their lower computational cost. This paper introduces a novel CNN architecture which is comparatively small in size and promising in performance to predict rice leaf disease with moderate accuracy and lower time complexity. The CNN network is trained with processed images. The image processing is performed using segmentation and k-means clustering to remove background and green parts of affected images. This technique proposes to detect rice disease of rice brown spot, rice bacterial blight and leaf smut with reliable outcomes in disease classifications. The model is trained using an augmented dataset of 2700 images (60% data) and validated with 1200 images of disease-affected samples to identify rice disease in agricultural fields. The model is tested with 630 images (14% data); testing accuracy is 97.9%. The model is exported into a mobile application to introduce the real-life application of the outcome of this work. The model accuracy is compared to others work associated with this type of problem. It is found that the performance of the model and the application are satisfactory compared to other works related to this work. The over-all accuracy is notable, showing the reliability and dependability of this model to classify rice leaf diseases.
Why it matches plant phenotyping methodsイネ葉の病徴を画像から分類するCNN、背景除去のセグメンテーション、k-means処理、検証、モバイル実装が中心であり、植物の病害状態を直接推定するフェノタイピング手法に該当する。
abstractThis paper introduces a novel CNN architecture which is comparatively small in size and promising in performance to predict rice leaf disease with moderate accuracy and lower time complexity.
Reproduction assets foundThe paper's rice leaf disease image inputs are publicly available: the UCI 'Rice Leaf Diseas' dataset and two Mendeley Data datasets ('Dhan-Shomadhan' and 'Rice Leaf Disease Image Samples') are explicitly named in the Data Availability Statement with public URLs and stated public availability. No author analysis code,训Dataset · publicIn this work, we performed experiments using three datasets named
“Rice Leaf Diseas” from UCI Machine Learning Repository (https://doi.org/10.24432/C5R013)Open asset ↗UCI Machine Learning Repository · 10.24432/C5R013pdf-page:15 lines:1-58Dataset · public“Rice Leaf Disease Image
Samples” from Mendeley Data (https://data.mendeley.com/datasets/fwcj7stb8r/1). All the datasets
are publicly available.Open asset ↗Mendeley Data · fwcj7stb8r/1pdf-page:15 lines:1-58Code / dataset availability confirmedEurope PMC · OpenAlex · checked 7 Sept 2026
Rice ( Oryza sativa L.) is one of the most important cereals, which provides 20% of the world's food energy. However, its productivity is poorly assessed especially in the global South. Here, we provide a first study to perform a deep-learning-based approach for instantaneously estimating rice yield using red-green-blue images. During ripening stage and at harvest, over 22,000 digital images were captured vertically downward over the rice canopy from a distance of 0.8 to 0.9 m at 4,820 harvesting plots having the yield of 0.1 to 16.1 t·ha -1 across 6 countries in Africa and Japan. A convolutional neural network applied to these data at harvest predicted 68% variation in yield with a relative root mean square error of 0.22. The developed model successfully detected genotypic difference and impact of agronomic interventions on yield in the independent dataset. The model also demonstrated robustness against the images acquired at different shooting angles up to 30° from right angle, diverse light environments, and shooting date during late ripening stage. Even when the resolution of images was reduced (from 0.2 to 3.2 cm·pixel -1 of ground sampling distance), the model could predict 57% variation in yield, implying that this approach can be scaled by the use of unmanned aerial vehicles. Our work offers low-cost, hands-on, and rapid approach for high-throughput phenotyping and can lead to impact assessment of productivity-enhancing interventions, detection of fields where these are needed to sustainably increase crop production, and yield forecast at several weeks before harvesting.
Why it matches plant phenotyping methodsRGB画像と深層学習によりイネ収量を推定する手法を開発・検証しており、植物表現型の取得・抽出が研究の中心である。
abstractHere, we provide a first study to perform a deep-learning-based approach for instantaneously estimating rice yield using red-green-blue images.
Reproduction assets foundThe paper explicitly states that the code to run the developed rice-yield CNN model is publicly available on the authors' GitHub repository. The image/yield database itself is not stated to be publicly deposited, so only the code qualifies as a paper-specific public asset.Code · publicThe code to run the developed CNN model is available at https://github.com/r1wtn/rice_yield_CNN .Open asset ↗r1wtn/rice_yield_CNNlines:57-71Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Improving soybean ( Glycine max L. (Merr.)) yield is crucial for strengthening national food security. Predicting soybean yield is essential to maximize the potential of crop varieties. Non-destructive methods are needed to estimate yield before crop maturity. Various approaches, including the pod-count method, have been used to predict soybean yield, but they often face issues with the crop background color. To address this challenge, we explored the application of a depth camera to real-time filtering of RGB images, aiming to enhance the performance of the pod-counting classification model. Additionally, this study aimed to compare object detection models (YOLOV7 and YOLOv7-E6E) and select the most suitable deep learning (DL) model for counting soybean pods. After identifying the best architecture, we conducted a comparative analysis of the model's performance by training the DL model with and without background removal from images. Results demonstrated that removing the background using a depth camera improved YOLOv7's pod detection performance by 10.2% precision, 16.4% recall, 13.8% mAP@50, and 17.7% mAP@0.5:0.95 score compared to when the background was present. Using a depth camera and the YOLOv7 algorithm for pod detection and counting yielded a mAP@0.5 of 93.4% and mAP@0.5:0.95 of 83.9%. These results indicated a significant improvement in the DL model's performance when the background was segmented, and a reasonably larger dataset was used to train YOLOv7.
Why it matches plant phenotyping methods深度カメラと物体検出モデルを用いてダイズ莢数という植物形質を非破壊推定する手法を開発・比較・評価しており、表現型取得が中心的である。
abstractwe explored the application of a depth camera to real-time filtering of RGB images, aiming to enhance the performance of the pod-counting classification model.
Reproduction assets foundThe paper's Data Availability Statement points to an authors' public GitHub repository containing the datasets generated and analyzed (soybean depth-camera images and pod-count segmentation data). Other URLs (labelImg, scikit-learn, CC license) are generic tools/licenses, not paper-specific assets.Dataset · publicThe datasets generated and analyzed for this study can be found in the Github repository Soybean pod count depth segmentation project 2022 accessible at https://github.com/jithin8mathew/soybean_pod_count_Depth_segmentation_project (accessed on 28 June 2023).Open asset ↗jithin8mathew/soybean_pod_count_Depth_segmentation_projectlines:183-198Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Measuring lycopene in tomatoes is fundamental to the agrifood industry because of its health benefits. It is one of the leading quality criteria for consuming this fruit. Traditionally, the amount determination of this carotenoid is performed using the high-performance liquid chromatography (HPLC) technique. This is a very reliable and accurate method, but it has several disadvantages, such as long analysis time, high cost, and destruction of the sample. In this sense, this work proposes a low-cost sensor that correlates the lycopene content in tomato with the color present in its epicarp. A Raspberry Pi 4 programmed with Python language was used to develop the lycopene prediction model. Various regression models were evaluated using neural networks, fuzzy logic, and linear regression. The best model was the fuzzy nonlinear regression as the RGB input, with a correlation of R 2 = 0.99 and a mean error of 1.9 × 10 -5 . This work was able to demonstrate that it is possible to determine the lycopene content using a digital camera and a low-cost integrated system in a non-invasive way.
Why it matches plant phenotyping methodsトマト果皮画像の色からリコペン含量を非破壊推定する低コストセンサーと予測モデルの開発が中心であり、植物器官の形質測定法に該当する。
abstractthis work proposes a low-cost sensor that correlates the lycopene content in tomato with the color present in its epicarp.
Reproduction assets foundThe paper's Data Availability Statement links to a public Google Drive folder containing the data supporting the reported lycopene measurement results (tomato RGB/L*a*b* image-derived measurements and HPLC-calibrated model data). No separate code deposit is described; the models were built in MATLAB toolboxes without aDataset · publicl analysis, M.-G.B.-S.; investigation, J.-A.P.-M.; writing—original draft preparation, J.P.-O. and M.-J.V.-A.; writing—review and editing, A.-I.B.-G.; supervision, A.-I.B.-G. All authors have read and agreed to the published version of the manuscript.
Data Availability Statement
Data supporting reported results can be found at: https://drive.google.com/drive/folders/1d1Q_RtEWmo2lbpipMCNG4x53s09-pB-C?usp=sharing .
Conflicts of Interest
The authors declare no conflict of interest.
Appendix A
Listed below are the 18 inference rules and weights for each of the two fuzzy systems red, green, and blue:
If (L is Low_L) and (a is Low_a) and (b is Low_b) then (Lycopene is Lycopenemf1)
If (L is Low_L) Open asset ↗lines:75-128Code / dataset availability confirmedEurope PMC · checked 10 Sept 2026
Fusarium head blight (FHB) is one of the most prevalent wheat diseases, causing substantial yield losses and health risks. Efficient phenotyping of FHB is crucial for accelerating resistance breeding, but currently used methods are time-consuming and expensive. The present article suggests a noninvasive classification model for FHB severity estimation using red-green-blue (RGB) images, without requiring extensive preprocessing. The model accepts images taken from consumer-grade, low-cost RGB cameras and classifies the FHB severity into 6 ordinal levels. In addition, we introduce a novel dataset consisting of around 3,000 images from 3 different years (2020, 2021, and 2022) and 2 FHB severity assessments per image from independent raters. We used a pretrained EfficientNet (size b0), redesigned as a regression model. The results demonstrate that the interrater reliability (Cohen's kappa, κ ) is substantially lower than the achieved individual network-to-rater results, e.g., 0.68 and 0.76 for the data captured in 2020, respectively. The model shows a generalization effect when trained with data from multiple years and tested on data from an independent year. Thus, using the images from 2020 and 2021 for training and 2022 for testing, we improved the F1w score by 0.14, the accuracy by 0.11, κ by 0.12, and reduced the root mean squared error by 0.5 compared to the best network trained only on a single year's data. The proposed lightweight model and methods could be deployed on mobile devices to automatically and objectively assess FHB severity with images from low-cost RGB cameras. The source code and the dataset are available at https://github.com/cvims/FHB_classification.
Why it matches plant phenotyping methodsRGB画像からコムギ赤かび病の重症度を推定する分類モデルを開発し、複数年データで性能を検証した、中心的な画像ベース植物フェノタイピング研究です。
abstractThe present article suggests a noninvasive classification model for FHB severity estimation using red-green-blue (RGB) images
Reproduction assets foundThe authors explicitly state that the FHB RGB image dataset with annotations and the source code are publicly available via their GitHub repository.Dataset · publicAll images and corresponding annotations can be downloaded from the link provided in our GitHub repository: https://github.com/cvims/FHB_classification .Open asset ↗cvims/FHB_classificationlines:663-678Code · publicThe source code and the dataset are available at https://github.com/cvims/FHB_classification .Open asset ↗cvims/FHB_classificationlines:1-28Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 15 Sept 2026
Abstract Background Significant effort has been made in manually tracking plant maturity and to measure early-stage plant density, and crop height in experimental breeding plots. Agronomic traits such as relative maturity (RM), stand count (SC) and plant height (PH) are essential to cultivar development, production recommendations and management practices. The use of RGB images collected via drones may replace traditional measurements in field trials with improved throughput, accuracy, and reduced cost. Recent advances in deep learning (DL) approaches have enabled the development of automated high-throughput phenotyping (HTP) systems that can quickly and accurately measure target traits using low-cost RGB drones. In this study, a time series of drone images was employed to estimate dry bean relative maturity (RM) using a hybrid model combining Convolutional Neural Networks (CNN) and Long Short-Term Memory (LSTM) for features extraction and capturing the sequential behavior of time series data. The performance of the Faster-RCNN object detection algorithm was also examined for stand count (SC) assessment during the early growth stages of dry beans. Various factors, such as flight frequencies, image resolution, and data augmentation, along with pseudo-labeling techniques, were investigated to enhance the performance and accuracy of DL models. Traditional methods involving pre-processing of images were also compared to the DL models employed in this study. Moreover, plant architecture was analyzed to extract plant height (PH) using digital surface model (DSM) and point cloud (PC) data sources. Results The CNN-LSTM model demonstrated high performance in predicting the RM of plots across diverse environments and flight datasets, regardless of image size or flight frequency. The DL model consistently outperformed the pre-processing images approach using traditional analysis (LOESS and SEG models), particularly when comparing errors using mean absolute error (MAE), providing less than two days of error in prediction across all environments. When growing degree days (GDD) data was incorporated into the CNN-LSTM model, the performance improved in certain environments, especially under unfavorable environmental conditions or weather stress. However, in other environments, the CNN-LSTM model performed similarly to or slightly better than the CNN-LSTM + GDD model. Consequently, incorporating GDD may not be necessary unless weather conditions are extreme. The Faster R-CNN model employed in this study was successful in accurately identifying bean plants at early growth stages, with correlations between the predicted SC and ground truth (GT) measurements of 0.8. The model performed consistently across various flight altitudes, and its accuracy was better compared to traditional segmentation methods using pre-processing images in OpenCV and the watershed algorithm. An appropriate growth stage should be carefully targeted for optimal results, as well as precise boundary box annotations. On average, the PC data source marginally outperformed the CSM/DSM data to estimating PH, with average correlation results of 0.55 for PC and 0.52 for CSM/DSM. The choice between them may depend on the specific environment and flight conditions, as the PH performance estimation is similar in the analyzed scenarios. However, the ground and vegetation elevation estimates can be optimized by deploying different thresholds and metrics to classify the data and perform the height extraction, respectively. Conclusions The results demonstrate that the CNN-LSTM and Faster R-CNN deep learning models outperforms other state-of-the-art techniques to quantify, respectively, RM and SC. The subtraction method proposed for estimating PH in the absence of accurate ground elevation data yielded results comparable to the difference-based method. In addition, open-source software developed to conduct the PH and RM analyses can contribute greatly to the phenotyping community.
Why it matches plant phenotyping methodsRGBドローン画像と深層学習を用いて、乾燥豆の成熟期、株数、草高を推定する手法を開発・比較・検証しており、表現型取得が研究の中心である。
abstractThe use of RGB images collected via drones may replace traditional measurements in field trials with improved throughput, accuracy, and reduced cost.
Reproduction assets foundThe preprint explicitly states that the authors' open-source phenotyping software (RM, SC, PH pipelines) is available on GitHub, with specific tools (matuRity, Vegetation index calculator, PlantHeightR, draw-plots-qgis) hosted at public URLs, and that the datasets (orthomosaics, shapefiles, ground notes, clipped plots,Code · publicle 2: Data S1). The GCPs were input and identified into the Pix4D project using the basic manual editor before initial processing.
R [ 57 ] software integrated with QGIS [ 58 ] was used to generate the polygon shapefiles according to plot boundary delimitation using the function ‘Draw plots from clicks’ available at https://github.com/diegojgris/draw-plots-qgis (Fig. 1 -b). Shapefiles were defined using images collected from the first flight available from each location. GDAL (Geospatial Data Abstraction Library) tool plugin in QGIS was used to spatial polygon vectors (or shapefiles) adjustments with a buffer zone for each plot to prevent any influence of neighboring plots. AdditOpen asset ↗diegojgris/draw-plots-qgislines:82-143Code · public3
4. DISCUSSION
The available open source HTP tools, matuRity [ 69 ], PlantHeightR [ 93 ], and Vegetation index calculator provided in this study, have the potential to facilitate and increase the data analysis performance in plant breeding and related areas. The user can either access them on-line or download the repository at https://github.com/msudrybeanbreeding?tab=repositories . Additionally, the step-by-step pipelines deployed in this study using DL methods are available at the GitHub repositories, as well as the complete data set used to perform the analysis including orthomosaics, shapefiles, ground notes, clipped plots, and programming codes. Thus, researchers may be able to replicaOpen asset ↗msudrybeanbreedinglines:572-648Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This study proposes an adaptive image augmentation scheme using deep reinforcement learning (DRL) to improve the performance of a deep learning-based automated optical inspection system. The study addresses the challenge of inconsistency in the performance of single image augmentation methods. It introduces a DRL algorithm, DQN, to select the most suitable augmentation method for each image. The proposed approach extracts geometric and pixel indicators to form states, and uses DeepLab-v3+ model to verify the augmented images and generate rewards. Image augmentation methods are treated as actions, and the DQN algorithm selects the best methods based on the images and segmentation model. The study demonstrates that the proposed framework outperforms any single image augmentation method and achieves better segmentation performance than other semantic segmentation models. The framework has practical implications for developing more accurate and robust automated optical inspection systems, critical for ensuring product quality in various industries. Future research can explore the generalizability and scalability of the proposed framework to other domains and applications. The code for this application is uploaded at https://github.com/lynnkobe/Adaptive-Image-Augmentation.git.
Why it matches plant phenotyping methods植物のさび病画像から病斑をセグメンテーションするための適応的画像拡張法をDRLで開発・評価しており、植物病害状態の画像ベース表現型取得が中心である。
abstractThis study proposes an adaptive image augmentation scheme using deep reinforcement learning (DRL) to improve the performance of a deep learning-based automated optical inspection system.
Reproduction assets foundThe paper's authors publicly released their DRL adaptive image augmentation analysis code on GitHub, and the plant rust leaf image dataset used for phenotyping/segmentation is publicly available on Baidu AI Studio per the data availability statement.Code · publicctical implications for developing more accurate and robust automated optical inspection systems, critical for ensuring product quality in various industries. Future research can explore the generalizability and scalability of the proposed framework to other domains and applications. The code for this application is uploaded at https://github.com/lynnkobe/Adaptive-Image-Augmentation.git .
adaptive image augmentation deep reinforcement learning deep Q-learning automated optical inspection semantic segmentation Department of Education of Guangdong Province
10.13039/501100010226 2021KTSCX005 Natural Science Foundation of Guangdong Province
10.13039/501100003453 2022A1515240061, 2023A1515012975 Open asset ↗lynnkobe/Adaptive-Image-Augmentationlines:1-51Dataset · publicwork should consider more advanced image augmentation methods, segmentation targets, and a more flexible and efficient DRL framework to provide more effective detection schemes for complex AOI application scenarios.
Data availability statement
Publicly available datasets were analyzed in this study. This data can be found here: https://aistudio.baidu.com/aistudio/datasetdetail/11591 .
Author contributions
SW, AK, YL, ZJ, HT, SA, MS and UB were responsible for question formulation, method, experimental design, and manuscript writing. YL, ZJ, HT, SA, MS and UB contributed to the issue investigation. HT contributed to the data analysis and AK funded the research. All authors listed have made a Open asset ↗11591lines:642-707Code / dataset availability confirmedOpenAlex · arXiv · checked 15 Sept 2026
Plant phenology and phenotype prediction using remote sensing data are increasingly gaining attention within the plant science community as a promising approach to enhance agricultural productivity. This work focuses on generating synthetic forestry images that satisfy certain phenotypic attributes, viz. canopy greenness. We harness a Generative Adversarial Network (GAN) to synthesize biologically plausible and phenotypically stable forestry images conditioned on the greenness of vegetation (a continuous attribute) over a specific region of interest, describing a particular vegetation type in a mixed forest. The training data is based on the automated digital camera imagery provided by the National Ecological Observatory Network (NEON) and processed by the PhenoCam Network. Our method helps render the appearance of forest sites specific to a greenness value. The synthetic images are subsequently utilized to predict another phenotypic attribute, viz., redness of plants. The quality of the synthetic images is assessed using the Structural SIMilarity (SSIM) index and Fréchet Inception Distance (FID). Further, the greenness and redness indices of the synthetic images are compared against those of the original images using Root Mean Squared Percentage Error (RMSPE) to evaluate their accuracy and integrity. The generalizability and scalability of our proposed GAN model are established by effectively transforming it to generate synthetic images for other forest sites and vegetation types. From a broader perspective, this approach could be leveraged to visualize forestry based on different phenotypic attributes in the context of various environmental parameters.
Why it matches plant phenotyping methods植物の表現型属性（樹冠の緑色度・植物の赤色度）に条件付けたGAN画像生成と、その精度・一般化可能性の評価が中心であり、画像ベースの表現型推定手法の開発に該当する。
abstractThis work focuses on generating synthetic forestry images that satisfy certain phenotypic attributes, viz. canopy greenness.
Reproduction assets foundThe paper's GAN analysis code is explicitly stated as publicly available on the authors' GitHub repository, and the training imagery (NEON PhenoCam phenology images, DP1.00033.001) is a public data product used directly for the paper's plant-phenotyping experiments.Code · publicview of various GAN frameworks and the applications of deep learning in agriculture. Section 3 describes the proposed approach, followed by the GAN architecture developed in this work. Experiments and results are discussed in Section 4 . Section 5 concludes the paper. The code for this work is publicly available on GitHub 6 6
6
https://github.com/iPRoBe-lab/synthetic_forestry_image_using_GAN .
2 Related Work
Since our goal is to design a GAN for agricultural applications, the literature review is conducted from both aspects. First, we introduce several GAN architectures proposed in the literature. Next, we summarize deep learning approaches, including GANs, that have been utilized in agriculOpen asset ↗iPRoBe-lab/synthetic_forestry_image_using_GANlines:98-122Code / dataset availability confirmedEurope PMC · checked 13 Sept 2026
There is a growing body of literature that recognises the importance of UAVs in precision agriculture tasks. Currently, flowering thinning tasks in orchard management rely on the decisions derived from time-consuming manual flower cluster counting in the field by an agrotechnician. Yet it is hard to guarantee the counting accuracy due to numerous human factors. The present dataset contains UAV images during the full blooming period of an apple orchard for three consecutive years, 2018, 2019, and 2020. It is directly linked to a research article entitled "Feasibility assessment of tree-level flower intensity quantification from UAV RGB imagery: A triennial study in an apple orchard". The data collection site was an apple orchard located at Randwijk, Overbetuwe, The Netherlands (51.938, 5.7068 in WGS84 UTM 31U). Moreover, the flower cluster number and floridity ground truth are also provided in one row from the orchard. The UAV flights were conducted with different flying altitudes, camera resolutions, and lighting conditions. This dataset aims to support researchers focussing on remote sensing, machine vision, deep learning, and image classification, and the stakeholders interested in precision horticulture and orchard management. It can be used for flowering intensity estimation and prediction, and spatial and temporal flowering variability mapping by using digital photogrammetry and 3D reconstruction.
Why it matches plant phenotyping methodsリンゴ樹の開花強度という植物形質をUAV RGB画像から推定するための3年間の画像・地上真値データセットであり、再利用可能なフェノタイピング基盤として中心的です。
abstractThe present dataset contains UAV images during the full blooming period of an apple orchard for three consecutive years, 2018, 2019, and 2020.
Reproduction assets foundThis Data in Brief article describes the authors' own public Zenodo deposit containing the paper-specific UAV RGB images, flower cluster/floridity ground truth, and GCP files for the apple orchard flowering monitoring study, with direct download URL provided.Dataset · publicRepository name: Zenodo
Data identification number: https://doi.org/10.5281/zenodo.6802308
Direct URL to data: https://zenodo.org/record/6802308#.YvvMFuxBz0pOpen asset ↗Zenodo · 10.5281/zenodo.6802308lines:1-51Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Remote sensing enables the rapid assessment of many traits that provide valuable information to plant breeders throughout the growing season to improve genetic gain. These traits are often extracted from remote sensing data on a row segment (rows within a plot) basis enabling the quantitative assessment of any row-wise subset of plants in a plot, rather than a few individual representative plants, as is commonly done in field-based phenotyping. Nevertheless, which rows to include in analysis is still a matter of debate. The objective of this experiment was to evaluate row selection and plot trimming in field trials conducted using four-row plots with remote sensing traits extracted from RGB (red-green-blue), LiDAR (light detection and ranging), and VNIR (visible near infrared) hyperspectral data. Uncrewed aerial vehicle flights were conducted throughout the growing seasons of 2018 to 2021 with data collected on three years of a sorghum experiment and two years of a maize experiment. Traits were extracted from each plot based on all four row segments (RS) (RS1234), inner rows (RS23), outer rows (RS14), and individual rows (RS1, RS2, RS3, and RS4). Plot end trimming of 40 cm was an additional factor tested. Repeatability and predictive modeling of end-season yield were used to evaluate performance of these methodologies. Plot trimming was never shown to result in significantly different outcomes from non-trimmed plots. Significant differences were often observed based on differences in row selection. Plots with more row segments were often favorable for increasing repeatability, and excluding outer rows improved predictive modeling. These results support long-standing principles of experimental design in agronomy and should be considered in breeding programs that incorporate remote sensing.
Why it matches plant phenotyping methodsRGB・LiDAR・VNIRリモートセンシングによる作物形質抽出について、行選択とプロットトリミングを反復性・収量予測で評価しており、フェノタイピング手法の技術評価が中心である。
abstractThe objective of this experiment was to evaluate row selection and plot trimming in field trials conducted using four-row plots with remote sensing traits extracted from RGB (red-green-blue), LiDAR (light detection and ranging), and VNIR (visible near infrared) hyperspectral data.
Reproduction assets foundThe paper states that remote sensing data, yield data, and the authors' R analysis code are publicly deposited in the Purdue University Research Repository under DOI 10.4231/PF9S-4G38. This is a paper-specific, publicly actionable asset covering both the phenotyping measurements (RGB/LiDAR/VNIR remote sensing traits, 4Dataset · publicRemote sensing data, yield data, and R code used for this study are available at the Purdue University Research Repository (10.4231/PF9S-4G38).Open asset ↗Purdue University Research Repository · 10.4231/PF9S-4G38lines:404-413Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
SegmentatFinding plant diseases early on is essential for reducing damage while improving the quality of the yield. This paper describes an intelligent cloud-edge-based system for identifying and categorizing diseases in grape plants. The system is based on the support vector machine (SVM), a supervised machine learning technique to classify data. The traits of healthy and diseased plants are identified using digital photographs of grape plants. To determine color and texture information, we retrieved global features from the grape images. Patterns or structures (such as corners or edges) are discovered using the speeded-up robust features (SURF) method. The K-means clustering approach is used to quantify feature space, which lowers the number of feature descriptors. The training set for the SVM classifier is made up of feature descriptors. The system classified the unlabeled grape images using the trained SVM classifier during testing. 1600 RGB pictures from four classes: Black-rot, Black-measles, Leaf-blight, and Healthy-leaf make up the original data set. To evaluate the system and provide accuracy and confusion matrices, simulations are run in four different color spaces (grayscale, RGB, YCbCr, and L*a*b*). In the L*a*b* color space, the system attained a maximum average accuracy of up to 90.63% at a ratio of 70:30 training to testing data.
Why it matches plant phenotyping methodsブドウ葉の画像から健全・病害状態を抽出し、画像特徴量、セグメンテーション／分類、複数色空間で性能評価するシステム開発が中心であるため。
abstractThis paper describes an intelligent cloud-edge-based system for identifying and categorizing diseases in grape plants.
Reproduction assets foundThe paper's grape disease classification uses the public PlantVillage grape leaf image dataset from Kaggle, and the authors also deposited their selected 1600-image dataset on Figshare with an explicit availability statement. No author analysis code or trained model is shared.Dataset · publicAvailability of data and materials
The data set is available at the following share repository:
https://figshare.com/ndownloader/files/37001836Open asset ↗figsharepdf-page:15 lines:1-59Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
Applying deep learning to images of cropping systems provides new knowledge and insights in research and commercial applications. Semantic segmentation or pixel-wise classification, of RGB images acquired at the ground level, into vegetation and background is a critical step in the estimation of several canopy traits. Current state of the art methodologies based on convolutional neural networks (CNNs) are trained on datasets acquired under controlled or indoor environments. These models are unable to generalize to real-world images and hence need to be fine-tuned using new labelled datasets. This motivated the creation of the VegAnn - Vegetation Annotation - dataset, a collection of 3775 multi-crop RGB images acquired for different phenological stages using different systems and platforms in diverse illumination conditions. We anticipate that VegAnn will help improving segmentation algorithm performances, facilitate benchmarking and promote large-scale crop vegetation segmentation research.
Why it matches plant phenotyping methods作物RGB画像から植生を分割し、キャノピー形質推定に用いる注釈付きデータセットを作成・ベンチマークする研究であり、フェノタイピング用データ基盤が中心である。
abstractThis motivated the creation of the VegAnn - Vegetation Annotation - dataset, a collection of 3775 multi-crop RGB images acquired for different phenological stages using different systems and platforms in diverse illumination conditions.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe dataset can be downloaded from Zenodo: https://doi.org/10.5281/zenodo.763640828 and is under the
CC-BY license, allowing for reuse without restrictions.Open asset ↗Zenodo · 10.5281/zenodo.7636408pdf-page:8 lines:1-50Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
The grapevine is vulnerable to diseases, deficiencies, and pests, leading to significant yield losses. Current disease controls involve monitoring and spraying phytosanitary products at the vineyard block scale. However, automatic detection of disease symptoms could reduce the use of these products and treat diseases before they spread. Flavescence dorée (FD), a highly infectious disease that causes significant yield losses, is only diagnosed by identifying symptoms on three grapevine organs: leaf, shoot, and bunch. Its diagnosis is carried out by scouting experts, as many other diseases and stresses, either biotic or abiotic, imply similar symptoms (but not all at the same time). These experts need a decision support tool to improve their scouting efficiency. To address this, a dataset of 1483 RGB images of grapevines affected by various diseases and stresses, including FD, was acquired by proximal sensing. The images were taken in the field at a distance of 1-2 meters to capture entire grapevines and an industrial flash was ensuring a constant luminance on the images regardless of the environmental circumstances. Images of 5 grape varieties (Cabernet sauvignon, Cabernet franc, Merlot, Ugni blanc and Sauvignon blanc) were acquired during 2 years (2020 and 2021). Two types of annotations were made: expert diagnosis at the grapevine scale in the field and symptom annotations at the leaf, shoot, and bunch levels on computer. On 744 images, the leaves were annotated and divided into three classes: 'FD symptomatic leaves', 'Esca symptomatic leaves', and 'Confounding leaves'. Symptomatic bunches and shoots were, in addition of leaves, annotated on 110 images using bounding boxes and broken lines, respectively. Additionally, 128 segmentation masks were created to allow the detection of the symptomatic shoots and bunches by segmentation algorithms and compare the results to those of the detection algorithms.
Why it matches plant phenotyping methodsブドウ病害の症状を画像から抽出するための専門家アノテーション付きデータセットであり、植物体・葉・枝・果房の病徴状態を対象とするフェノタイピング手法・ベンチマークとして中心的です。
abstractTo address this, a dataset of 1483 RGB images of grapevines affected by various diseases and stresses, including FD, was acquired by proximal sensing.
Reproduction assets foundThis Data Brief describes a paper-specific grapevine disease image dataset (1483 RGB images with expert annotations) publicly deposited on Mendeley Data, with a direct URL provided in the article.Dataset · publice:
○
Plot 1: 44.6992974, -0.3924154
•
City/Town/Region: Rions, Gironde
Latitude and longitude:
○
Plot 1: 44.6704526, -0.3561660
○
Plot 2: 44.6726088, -0.3610193
•
City/Town/Region: Saint-Martin, Gironde
Latitude and longitude:
○
Plot 1: 44.5712274, -0.1697558
Data accessibility
Repository name: Mendeley Data
Direct URL to data: https://data.mendeley.com/datasets/3dr9r3w3jn/2
Related research article
Tardif, M., Amri, A., Keresztes, B., Deshayes, A., Martin, D., Greven, M., & Da Costa, J.-P. (2022). Two-stage automatic diagnosis of Flavescence Dorée based on proximal imaging and artificial intelligence: a multi-year and multi-variety experimental study. OENO One, 56(3), 371–384. https://doi.oOpen asset ↗Mendeley Data · 3dr9r3w3jn/2lines:46-137Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Yellow rust is a devastating disease that causes significant losses in wheat production worldwide and significantly affects wheat quality. It can be controlled by cultivating resistant cultivars, applying fungicides, and appropriate agricultural practices. The degree of precautions depends on the extent of the disease. Therefore, it is critical to detect the disease as early as possible. The disease causes deformations in the wheat leaf texture that reveals the severity of the disease. The gray-level co-occurrence matrix(GLCM) is a conventional texture feature descriptor extracted from gray-level images. However, numerous studies in the literature attempt to incorporate texture color with GLCM features to reveal hidden patterns that exist in color channels. On the other hand, recent advances in image analysis have led to the extraction of data-representative features so-called deep features. In particular, convolutional neural networks (CNNs) have the remarkable capability of recognizing patterns and show promising results for image classification when fed with image texture. Herein, the feasibility of using a combination of textural features and deep features to determine the severity of yellow rust disease in wheat was investigated. Textural features include both gray-level and color-level information. Also, pre-trained DenseNet was employed for deep features. The dataset, so-called Yellow-Rust-19, composed of wheat leaf images, was employed. Different classification models were developed using different color spaces such as RGB, HSV, and L*a*b, and two classification methods such as SVM and KNN. The combined model named CNN-CGLCM_HSV, where HSV and SVM were employed, with an accuracy of 92.4% outperformed the other models.
Why it matches plant phenotyping methods小麦葉画像から黄さび病の重症度を推定する画像解析手法を開発・比較しており、植物病害状態の表現型取得が中心である。
abstractThe disease causes deformations in the wheat leaf texture that reveals the severity of the disease.
Reproduction assets foundThe paper's wheat yellow rust phenotyping image dataset (Yellow-Rust-19, 15,000 labeled wheat leaf images across six infection-type classes) is publicly deposited on Kaggle by the authors, as stated in the Data Availability section. No author analysis code or trained model checkpoints are reported as publicly availableDataset · publicThe data have been deposited in the Kaggle database ( https://www.kaggle.com/datasets/tolgahayit/yellowrust19-yellow-rust-disease-in-wheat ).Open asset ↗Kaggle · yellowrust19-yellow-rust-disease-in-wheatlines:761-833Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
The sowing pattern has an important impact on light interception efficiency in maize by determining the spatial distribution of leaves within the canopy. Leaves orientation is an important architectural trait determining maize canopies light interception. Previous studies have indicated how maize genotypes may adapt leaves orientation to avoid mutual shading with neighboring plants as a plastic response to intraspecific competition. The goal of the present study is 2-fold: firstly, to propose and validate an automatic algorithm (Automatic Leaf Azimuth Estimation from Midrib detection [ALAEM]) based on leaves midrib detection in vertical red green blue (RGB) images to describe leaves orientation at the canopy level; and secondly, to describe genotypic and environmental differences in leaves orientation in a panel of 5 maize hybrids sowing at 2 densities (6 and 12 plants.m -2 ) and 2 row spacing (0.4 and 0.8 m) over 2 different sites in southern France. The ALAEM algorithm was validated against in situ annotations of leaves orientation, showing a satisfactory agreement (root mean square [RMSE] error = 0.1, R 2 = 0.35) in the proportion of leaves oriented perpendicular to rows direction across sowing patterns, genotypes, and sites. The results from ALAEM permitted to identify significant differences in leaves orientation associated to leaves intraspecific competition. In both experiments, a progressive increase in the proportion of leaves oriented perpendicular to the row is observed when the rectangularity of the sowing pattern increases from 1 (6 plants.m -2 , 0.4 m row spacing) towards 8 (12 plants.m -2 , 0.8 m row spacing). Significant differences among the 5 cultivars were found, with 2 hybrids exhibiting, systematically, a more plastic behavior with a significantly higher proportion of leaves oriented perpendicularly to avoid overlapping with neighbor plants at high rectangularity. Differences in leaves orientation were also found between experiments in a squared sowing pattern (6 plants.m -2 , 0.4 m row spacing), indicating a possible contribution of illumination conditions inducing a preferential orientation toward east-west direction when intraspecific competition is low.
Why it matches plant phenotyping methodsRGB画像からトウモロコシ葉の方位を推定するALAEMアルゴリズムを提案・検証し、葉の形態形質を抽出しているため、植物フェノタイピング手法が中心です。
abstractto propose and validate an automatic algorithm (Automatic Leaf Azimuth Estimation from Midrib detection [ALAEM]) based on leaves midrib detection in vertical red green blue (RGB) images to describe leaves orientation at the canopy level
Reproduction assets foundThe paper's ALAEM phenotyping algorithm (maize leaf azimuth estimation from RGB images) is publicly available on GitHub, along with data samples per date and GxR conditions and a reproducible example.Code · publicThe full ALAEM code is available at github.com/mserouar/ALAEM along with data samples of each date and GxR conditions with a reproducible example.Open asset ↗mserouar/ALAEMlines:74-83Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
Background The current development of sensor technologies towards ever more cost-effective and powerful systems is steadily increasing the application of low-cost sensors in different horticultural sectors. In plant in vitro culture, as a fundamental technique for plant breeding and plant propagation, the majority of evaluation methods to describe the performance of these cultures are based on destructive approaches, limiting data to unique endpoint measurements. Therefore, a non-destructive phenotyping system capable of automated, continuous and objective quantification of in vitro plant traits is desirable. Results An automated low-cost multi-sensor system acquiring phenotypic data of plant in vitro cultures was developed and evaluated. Unique hardware and software components were selected to construct a xyz-scanning system with an adequate accuracy for consistent data acquisition. Relevant plant growth predictors, such as projected area of explants and average canopy height were determined employing multi-sensory imaging and various developmental processes could be monitored and documented. The validation of the RGB image segmentation pipeline using a random forest classifier revealed very strong correlation with manual pixel annotation. Depth imaging by a laser distance sensor of plant in vitro cultures enabled the description of the dynamic behavior of the average canopy height, the maximum plant height, but also the culture media height and volume. Projected plant area in depth data by RANSAC (random sample consensus) segmentation approach well matched the projected plant area by RGB image processing pipeline. In addition, a successful proof of concept for in situ spectral fluorescence monitoring was achieved and challenges of thermal imaging were documented. Potential use cases for the digital quantification of key performance parameters in research and commercial application are discussed. Conclusion The technical realization of "Phenomenon" allows phenotyping of plant in vitro cultures under highly challenging conditions and enables multi-sensory monitoring through closed vessels, ensuring the aseptic status of the cultures. Automated sensor application in plant tissue culture promises great potential for a non-destructive growth analysis enhancing commercial propagation as well as enabling research with novel digital parameters recorded over time.
Why it matches plant phenotyping methods植物組織培養の形質を自動・非破壊・連続測定するマルチセンサーフェノタイピングシステムを開発し、画像分割や深度計測を検証しており、方法が研究の中心である。
abstractAn automated low-cost multi-sensor system acquiring phenotypic data of plant in vitro cultures was developed and evaluated.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe dataset supporting the conclusions of this article (Hard- and Software of “Phenomenon” phenotyping system) are available in an open-access Github repository, https://github.com/halube/Phenomenon .Open asset ↗halube/Phenomenonlines:224-282Code / dataset availability confirmedEurope PMC · Crossref · checked 15 Sept 2026
The use of machine learning is rapidly expanding across many industries, including agriculture and the IT sector. However, data is essential for machine learning models, and a substantial amount of data is required prior to training a model. We have collected data of groundnut plant leaves in the form of digital photographs taken in the Koppal (Karnataka, India) area with the assistance of a pathologist in natural settings. Images of leaves are categorized into six distinct groups according to their condition. Collected images are pre-processed and the processed images of groundnut leaves are kept in 6 folders as: the "healthy leaves" folder with 1871 images, the "early leaf spot" folder with 1731 images, the "late leaf spot" folder with 1896 images, the "Nutrition deficiency" folder with 1665 images, the "rust" folder with 1724 images, and the "early rust" folder with 1474 images. The total number of images in the dataset is 10361. This dataset will be useful to train and validate deep learning and machine learning algorithms for groundnut leaf disease classification and recognition. Disease detection in plants is crucial for limiting crop losses and our dataset will help disease detection in groundnut plants. This dataset is freely accessible to public at https://data.mendeley.com/datasets/22p2vcbxfk/3 and at https://doi.org/10.17632/22p2vcbxfk.3.
Why it matches plant phenotyping methods落花生葉の画像データセット自体を構築・公開し、葉の健康状態や病徴分類に利用する研究であり、植物病害状態の画像ベース表現型取得が中心です。
titleDataset of groundnut plant leaf images for classification and detection
Reproduction assets foundThe paper is a data descriptor for a public groundnut leaf image dataset (10,361 annotated images across six disease/health classes) deposited on Mendeley Data, with explicit public URLs and DOI. This is a paper-specific plant image dataset directly used for the phenotyping/disease-classification analysis. No author's Dataset · publichis dataset will be useful to train and validate deep learning and machine learning algorithms for groundnut leaf disease classification and recognition. Disease detection in plants is crucial for limiting crop losses and our dataset will help disease detection in groundnut plants. This dataset is freely accessible to public at https://data.mendeley.com/datasets/22p2vcbxfk/3 and at https://doi.org/10.17632/22p2vcbxfk.3
Keywords: Classification of leaf diseases, Image dataset, Diagnosis of disease, Computer Vision
status released display-pdf yes is-olf no is-manuscript no is-preprint no is-journal-matter no is-scanned no is-retracted no
Received 2023 Mar 10; Revised 2023 Apr 14; Accepted 2023Open asset ↗10.17632/22p2vcbxfk.3lines:1-56Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Background The flowering period is a critical time for the growth of rape plants. Counting rape flower clusters can help farmers to predict the yield information of the corresponding rape fields. However, counting in-field is a time-consuming and labor-intensive task. To address this, we explored a deep learning counting method based on unmanned aircraft vehicle (UAV). The proposed method developed the in-field counting of rape flower clusters as a density estimation problem. It is different from the object detection method of counting the bounding boxes. The crucial step of the density map estimation using deep learning is to train a deep neural network that maps from an input image to the corresponding annotated density map. Results We explored a rape flower cluster counting network series: RapeNet and RapeNet+. A rectangular box labeling-based rape flower clusters dataset (RFRB) and a centroid labeling-based rape flower clusters dataset (RFCP) were used for network model training. To verify the performance of RapeNet series, the paper compares the counting result with the real values of manual annotation. The average accuracy (Acc), relative root mean square error (rrMSE) and [Formula: see text] of the metrics are up to 0.9062, 12.03 and 0.9635 on the dataset RFRB, and 0.9538, 5.61 and 0.9826 on the dataset RFCP, respectively. The resolution has little influence for the proposed model. In addition, the visualization results have some interpretability. Conclusions Extensive experimental results demonstrate that the RapeNet series outperforms other state-of-the-art counting approaches. The proposed method provides an important technical support for the crop counting statistics of rape flower clusters in field.
Why it matches plant phenotyping methodsUAV-RGB画像から菜種の花房数という植物器官形質を推定する深層学習手法を開発・評価しており、フェノタイピング手法が中心である。
abstractwe explored a deep learning counting method based on unmanned aircraft vehicle (UAV).
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe codes, datasets RFRB and RFCP used in the study are available online at: https://github.com/CV-Wang/RapeNet .Open asset ↗CV-Wang/RapeNetlines:216-232Code / dataset availability confirmedEurope PMC · checked 13 Sept 2026
In most of the countries, grapes are considered as a cash crop. Currently huge research is going on in development of automated grape harvesting systems. Speedy and reliable grape bunch detection is prime need for various deep learning based automated systems which deals with object detection and object segmentation tasks. But currently very few datasets are available on grape bunches in vineyard, because of which there is restriction to the research in this area. In comparison to the vineyard in outside countries, Indian vineyard structure is more complex, so it becomes hard to work in real-time. To overcome these problems and to make vineyard dataset for suitable for Indian vineyard scenarios, this paper proposed four different datasets on grape bunches in vineyard. For creating all datasets in GrapesNet, natural environmental conditions have been considered. GrapesNet includes total 11000+ images of grape bunches. Necessary data for weight prediction of grape cluster is also provided with dataset like height, width and real weight of cluster present in image. Proposed datasets can be used for prime tasks like grape bunch detection, grape bunch segmentation, and grape bunch weight estimation etc. of future generation automated vineyard harvesting technologies.
Why it matches plant phenotyping methodsブドウ果房画像データセットを構築し、果房の検出・セグメンテーションに加えて重量推定用の寸法と実重量を提供することが中心で、再利用可能な植物表現型データセットに該当する。
abstractthis paper proposed four different datasets on grape bunches in vineyard.
Reproduction assets foundThe paper is a data descriptor for GrapesNet, a public Mendeley Data repository of Indian vineyard RGB/RGB-D grape bunch image datasets with ground-truth cluster height, width, and weight measurements used for phenotyping tasks (detection, segmentation, weight estimation). The dataset is the paper's core asset and is aDataset · publicRepository name: GrapesNet: Indian Grape Clusters RGB & RGB-D Image Datasets
Data identification number (DOI): 10.17632/mhzmzd5cwx.1
Direct URL to data: https://data.mendeley.com/datasets/mhzmzd5cwx/1Open asset ↗10.17632/mhzmzd5cwx.1lines:1-95Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
Even though mechanization has dramatically decreased labor requirements, vineyard management costs are still affected by selective operations such as winter pruning. Robotic solutions are becoming more common in agriculture, however, few studies have focused on grapevines. This work aims at fine-tuning and testing two different deep neural networks for: (i) detecting pruning regions (PRs), and (ii) performing organ segmentation of spur-pruned dormant grapevines. The Faster R-CNN network was fine-tuned using 1215 RGB images collected in different vineyards and annotated through bounding boxes. The network was tested on 232 RGB images, PRs were categorized by wood type (W), orientation (Or) and visibility (V), and performance metrics were calculated. PR detection was dramatically affected by visibility. Highest detection was associated with visible intermediate complex spurs in Merlot (0.97), while most represented coplanar simple spurs allowed a 74% detection rate. The Mask R-CNN network was trained for grapevine organs (GOs) segmentation by using 119 RGB images annotated by distinguishing 5 classes (cordon, arm, spur, cane and node). The network was tested on 60 RGB images of light pruned (LP), shoot-thinned (ST) and unthinned control (C) grapevines. Nodes were the best segmented GOs (0.88) and general recall was higher for ST (0.85) compared to C (0.80) confirming the role of canopy management in improving performances of hi-tech solutions based on artificial intelligence. The two fine-tuned and tested networks are part of a larger control framework that is under development for autonomous winter pruning of grapevines. Supplementary information The online version contains supplementary material available at 10.1007/s11119-023-10006-y.
Why it matches plant phenotyping methods深層学習によるブドウ樹の剪定領域検出と器官セグメンテーションを開発・評価しており、植物器官状態の画像ベース取得が中心である。
abstractThis work aims at fine-tuning and testing two different deep neural networks for: (i) detecting pruning regions (PRs), and (ii) performing organ segmentation of spur-pruned dormant grapevines.
Reproduction assets foundThe paper's annotated grapevine organ segmentation dataset (images with polygon/bounding-box annotations for cordon, arm, spur, cane, node) is publicly deposited on Zenodo. The pruning region detection dataset is not public and must be requested from the corresponding author. No author analysis code is available (code:Dataset · publicd Research, PRIN 20172HHNK5 Project.
Data availability
The pruning region detection dataset generated and/or analyzed during the presented study is currently not publicly available, but can be requested from the corresponding author on reasonable request. The annotated segmentation dataset is published on the zenodo platform at https://zenodo.org/record/5501784 .
Code availability
Not applicable.
Declarations
Conflict of interest
The authors have no relevant financial or non-financial interests to disclose.
Ethical approval
The authors comply with the Journal’s Ethics guidelines confirming to respect third parties rights such as copyright and/or moral rights.
Consent to participate
NoOpen asset ↗zenodo · 5501784lines:583-615Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Premise The measurement of leaf morphometric parameters from digital images can be time-consuming or restrictive when using digital image analysis softwares. The Multiple Leaf Sample Extraction System (MuLES) is a new tool that enables high-throughput leaf shape analysis with minimal user input or prerequisites, such as coding knowledge or image modification. Methods and results MuLES uses contrasting pixel color values to distinguish between leaf objects and their background area, eliminating the need for color threshold-based methods or color correction cards typically required in other software methods. The leaf morphometric parameters measured by this software, especially leaf aspect ratio, were able to distinguish between large populations of different accessions for the same species in a high-throughput manner. Conclusions MuLES provides a simple method for the rapid measurement of leaf morphometric parameters in large plant populations from digital images and demonstrates the ability of leaf aspect ratio to distinguish between closely related plant types.
Why it matches plant phenotyping methods葉のデジタル画像から形態形質を自動・高スループットに抽出するソフトウェア手法が研究の中心であり、植物フェノタイピング手法に該当する。
abstractThe Multiple Leaf Sample Extraction System (MuLES) is a new tool that enables high-throughput leaf shape analysis with minimal user input or prerequisites, such as coding knowledge or image modification.
Reproduction assets foundThe paper's authors publicly release the MuLES and imgSplit macro scripts (the analysis code used for the leaf phenotyping measurements) on GitHub, along with sample leaf images and video walkthroughs on YouTube.Code · publicIra A. Herniter, Email: ira.herniter@rutgers.edu.
DATA AVAILABILITY STATEMENT
The MuLES and imgSplit scripts are open source and freely available on GitHub ( https://github.com/0cb/mules ), along with a detailed introduction (“Introduction to MuLES”) and sample leaf images from each species tested. Video demonstrations of the MuLES macro script (Video 1 ) and imgSplit macro script (Video S1 ) are included with the article and are also available on YouTube (MuLES: https://www.youtube.com/watch?v=vtj93rbDO28 ; imOpen asset ↗0cb/muleslines:143-204Code · publicailable on GitHub ( https://github.com/0cb/mules ), along with a detailed introduction (“Introduction to MuLES”) and sample leaf images from each species tested. Video demonstrations of the MuLES macro script (Video 1 ) and imgSplit macro script (Video S1 ) are included with the article and are also available on YouTube (MuLES: https://www.youtube.com/watch?v=vtj93rbDO28 ; imgSplit: https://www.youtube.com/watch?v=9HVsNvAWPjE ).
REFERENCES
Biot, E.
, Cortizo M., Burguet J., Kiss A., Oughou M., Maugarny‐Calès A., Gonçalves B., et al. 2016. Multiscale quantification of morphodynamics: MorphoLeaf software for 2D shape analysis. Development
143: 3417–3428.
Bonhomme, V.
, Picq S., Gaucherel C., aOpen asset ↗lines:143-204Code · publicg with a detailed introduction (“Introduction to MuLES”) and sample leaf images from each species tested. Video demonstrations of the MuLES macro script (Video 1 ) and imgSplit macro script (Video S1 ) are included with the article and are also available on YouTube (MuLES: https://www.youtube.com/watch?v=vtj93rbDO28 ; imgSplit: https://www.youtube.com/watch?v=9HVsNvAWPjE ).
REFERENCES
Biot, E.
, Cortizo M., Burguet J., Kiss A., Oughou M., Maugarny‐Calès A., Gonçalves B., et al. 2016. Multiscale quantification of morphodynamics: MorphoLeaf software for 2D shape analysis. Development
143: 3417–3428.
Bonhomme, V.
, Picq S., Gaucherel C., and Claude J.. 2014. Momocs: Outline analysis using R. JoOpen asset ↗lines:143-204Code / dataset availability confirmedOpenAlex · checked 13 Sept 2026
Remote-sensing data has become essential for site-specific farming methods. It is also a powerful tool for monitoring the agroecosystem services offered by integrating cover crops (CC) into crop rotations. This study presents a method to determine the canopy height (CH), defined as the average height of the crop stand surface, including tops and gaps, of heterogeneous and multi-species CC using commercial unmanned aerial vehicles (UAVs). Images captured with red–green–blue cameras mounted on UAVs in two missions varying in ground sample distances were used as input for generating three-dimensional point clouds using the structure-from-motion approach. These point clouds were then compared to manual ground measurements. The results showed that the agreement between the methods was closest when CC presented dense and smooth canopies. However, stands with rough canopies or gaps showed substantial differences between the UAV method and ground measurements. We conclude that the UAV method is substantially more precise and accurate in determining CH than measurements taken with a ruler since the UAV introduces additional dimensions with greatly increased resolution. CH can be a reliable indicator of biomass yield, but no differences between the investigated methods were found, probably due to allometric variations of different CC species. We propose the presented UAV method as a promising tool to include site-specific information on CC in crop production strategies.
Why it matches plant phenotyping methodsUAV画像とSfM点群を用いて被覆作物の群落高を推定する手法を提示し、地上測定と比較検証しており、植物形質取得法が研究の中心である。
abstractThis study presents a method to determine the canopy height (CH), defined as the average height of the crop stand surface, including tops and gaps, of heterogeneous and multi-species CC using commercial unmanned aerial vehicles (UAVs).
Reproduction assets foundThe paper's canopy height and biomass measurements (UAV-derived CH, ruler measurements, DMY) are openly available as a Zenodo dataset, explicitly stated in the Data Availability Statement. The Metashape scripts GitHub link and CRAN raster package are generic third-party tools, not authors' analysis code.Dataset · publicData Availability Statement: The data presented in this study are openly available in the Zenodo
archive at the following DOI: https://doi.org/10.5281/zenodo.7713341 (Kümmerer, 2023).Open asset ↗Zenodo · 10.5281/zenodo.7713341pdf-page:15 lines:1-51Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
As phenomics data volume and dimensionality increase due to advancements in sensor technology, there is an urgent need to develop and implement scalable data processing pipelines. Current phenomics data processing pipelines lack modularity, extensibility, and processing distribution across sensor modalities and phenotyping platforms. To address these challenges, we developed PhytoOracle (PO), a suite of modular, scalable pipelines for processing large volumes of field phenomics RGB, thermal, PSII chlorophyll fluorescence 2D images, and 3D point clouds. PhytoOracle aims to ( i ) improve data processing efficiency; ( ii ) provide an extensible, reproducible computing framework; and ( iii ) enable data fusion of multi-modal phenomics data. PhytoOracle integrates open-source distributed computing frameworks for parallel processing on high-performance computing, cloud, and local computing environments. Each pipeline component is available as a standalone container, providing transferability, extensibility, and reproducibility. The PO pipeline extracts and associates individual plant traits across sensor modalities and collection time points, representing a unique multi-system approach to addressing the genotype-phenotype gap. To date, PO supports lettuce and sorghum phenotypic trait extraction, with a goal of widening the range of supported species in the future. At the maximum number of cores tested in this study (1,024 cores), PO processing times were: 235 minutes for 9,270 RGB images (140.7 GB), 235 minutes for 9,270 thermal images (5.4 GB), and 13 minutes for 39,678 PSII images (86.2 GB). These processing times represent end-to-end processing, from raw data to fully processed numerical phenotypic trait data. Repeatability values of 0.39-0.95 (bounding area), 0.81-0.95 (axis-aligned bounding volume), 0.79-0.94 (oriented bounding volume), 0.83-0.95 (plant height), and 0.81-0.95 (number of points) were observed in Field Scanalyzer data. We also show the ability of PO to process drone data with a repeatability of 0.55-0.95 (bounding area).
Why it matches plant phenotyping methods植物フェノミクスのマルチモーダル画像・点群から形質を抽出する、スケーラブルで再現可能な処理パイプラインの開発と反復性評価が中心である。
abstractwe developed PhytoOracle (PO), a suite of modular, scalable pipelines for processing large volumes of field phenomics RGB, thermal, PSII chlorophyll fluorescence 2D images, and 3D point clouds.
Reproduction assets foundThe paper's Code and Data Availability statements provide explicit public URLs for the authors' PhytoOracle processing code, ML training-data preparation scripts, trained model training code, and the season-10 lettuce benchmarking dataset (raw RGB/thermal/PSII images and point clouds) hosted on CyVerse.Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://datacommons.cyverse.org/browse/iplant/home/shared/phytooracle/season_10_lettuce_yr_2020Open asset ↗iplant/home/shared/phytooracle/season_10_lettuce_yr_2020lines:640-662Code · publicThe automation script and data processing repositories can be accessed at: http://github.com/phytooracleOpen asset ↗github.com/phytooraclelines:640-662Code · publicThe Python scripts used to prepare RGB training data can be accessed here: http://github.com/phytooracle/automation/blob/main/ml/collect_rgb_data.pyOpen asset ↗github.com/phytooracle/automationlines:640-662Code · publicThe Python script used to prepare thermal training data can be accessed here: http://github.com/phytooracle/automation/blob/main/ml/collect_flir_data.pyOpen asset ↗github.com/phytooracle/automationlines:640-662Code · publicThe Python script used to prepare 3D-derived images can be found here: http://github.com/phytooracle/3d_heat_map/blob/main/3d_heat_map.pyOpen asset ↗github.com/phytooracle/3d_heat_maplines:640-662Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
The rapidly changing climate affects an extensive spectrum of human-centered environments. The food industry is one of the affected industries due to rapid climate change. Rice is a staple food and an important cultural key point for Japanese people. As Japan is a country in which natural disasters continuously occur, using aged seeds for cultivation has become a regular practice. It is a well-known truth that seed quality and age highly impact germination rate and successful cultivation. However, a considerable research gap exists in the identification of seeds according to age. Hence, this study aims to implement a machine-learning model to identify Japanese rice seeds according to their age. Since agewise datasets are unavailable in the literature, this research implements a novel rice seed dataset with six rice varieties and three age variations. The rice seed dataset was created using a combination of RGB images. Image features were extracted using six feature descriptors. The proposed algorithm used in this study is called Cascaded-ANFIS. A novel structure for this algorithm is proposed in this work, combining several gradient-boosting algorithms such as XGBoost, CatBoost, and LightGBM. The classification was conducted in two steps. First, the seed variety was identified. Then, the age was predicted. As a result, seven classification models were implemented. The performance of the proposed algorithm was evaluated against 13 state-of-the-art algorithms. Overall, the proposed algorithm has a higher accuracy, precision, recall, and F1-score than the others. For the classification of variety, the proposed algorithm scored 0.7697, 0.7949, 0.7707, and 0.7862, respectively. The results of this study confirm that the proposed algorithm can be employed in the successful age classification of seeds.
Why it matches plant phenotyping methodsRGB画像からコメ種子の品種・年齢を抽出する機械学習手法を開発し、新規データセットを構築して複数手法と性能比較しているため、種子状態の画像ベース表現型解析が中心である。
abstractthis study aims to implement a machine-learning model to identify Japanese rice seeds according to their age
Reproduction assets foundThe paper's authors constructed a novel rice seed image dataset (six varieties, three harvest ages) and explicitly state it is publicly available on Kaggle under the author's account, matching an allowed URL. No code or model release is stated.Dataset · publicgle data repository accessed on 15 January 2023 (https://www.kaggle.com/datasets/namalrathnayake1Open asset ↗Kagglepdf-page:16 lines:1-60Code / dataset availability confirmedEurope PMC · OpenAlex · checked 15 Sept 2026
Smart farming (SF) applications rely on robust and accurate computer vision systems. An important computer vision task in agriculture is semantic segmentation, which aims to classify each pixel of an image and can be used for selective weed removal. State-of-the-art implementations use convolutional neural networks (CNN) that are trained on large image datasets. In agriculture, publicly available RGB image datasets are scarce and often lack detailed ground-truth information. In contrast to agriculture, other research areas feature RGB-D datasets that combine color (RGB) with additional distance (D) information. Such results show that including distance as an additional modality can improve model performance further. Therefore, we introduce WE3DS as the first RGB-D image dataset for multi-class plant species semantic segmentation in crop farming. It contains 2568 RGB-D images (color image and distance map) and corresponding hand-annotated ground-truth masks. Images were taken under natural light conditions using an RGB-D sensor consisting of two RGB cameras in a stereo setup. Further, we provide a benchmark for RGB-D semantic segmentation on the WE3DS dataset and compare it with a solely RGB-based model. Our trained models achieve up to 70.7% mean Intersection over Union (mIoU) for discriminating between soil, seven crop species, and ten weed species. Finally, our work confirms the finding that additional distance information improves segmentation quality.
Why it matches plant phenotyping methods植物種の画素単位セグメンテーション用RGB-Dデータセットとベンチマークを構築し、植物識別・分離という表現型取得ワークフローを中心的に評価しているため。
abstractwe introduce WE3DS as the first RGB-D image dataset for multi-class plant species semantic segmentation in crop farming.
Reproduction assets foundThe paper's WE3DS RGB-D image dataset (2568 annotated images) and the authors' modified ESANet analysis code are publicly deposited on Zenodo (DOI 10.5281/zenodo.7457983), as stated in the experiments section. The MDPI supplementary file contains only tables (species list, depth accuracy, confusion matrices), not the影像Dataset · public024 × 512
20.6
27.0
37.7 †
34.2
11.5
RGB
1024 × 512
52.4
22.2
39.2 †
38.4
11.5
RGB-D
1024 × 512
59.1
19.2
85.8
55.3
18.5
D
1280 × 960
48.5
11.3
154.1
37.0
27.1
RGB
1280 × 960
70.1
11.0
156.1
46.8
27.1
RGB-D
1280 × 960
70.7
8.6
240.3
66.6
43.4
Information on the dataset and modified code of the ESANet can be found on our website https://doi.org/10.5281/zenodo.7457983 (accessed on 18 December 2022).
4.4. ResultsOpen asset ↗Zenodo · 10.5281/zenodo.7457983lines:69-146Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 7 Sept 2026
Abstract Background Object detection, size determination, and colour detection of optical images are tools commonly used in plant science. Key examples of this include identification of ripening stages of fruit such as tomatoes and the determination of chlorophyll content as an indicator of plant health. While methods exist for determining these important phenotypes, they often require proprietary software or require coding knowledge to adapt existing code. Results We provide a set of free and open-source Python scripts that, without any adaptation, are able to perform background correction and colour correction on images using a ColourChecker chart. Further scripts identify objects, use an object of known size to calibrate for size, and extract the average colour of objects in RGB, Lab, and YUV colour spaces. We use two examples to demonstrate the use of these scripts. We show the consistency of these scripts by imaging in four different lighting conditions, and then we use two examples to show how the scripts can be used. In the first example, we estimate the lycopene content in tomatoes (Solanum lycopersicum) var. Tiny Tim using fruit images and an exponential model to predict lycopene content. We demonstrate that three different cameras (a DSLR camera and two separate mobile phones) are all able to model lycopene content. The models that predict lycopene or chlorophyll need to be adjusted depending on the camera used. In the second example, we estimate the chlorophyll content of basil (Ocimum basilicum) using leaf images and an exponential model to predict chlorophyll content. Conclusion A fast, cheap, non-destructive, and inexpensive method is provided for the determination of the size and colour of plant materials using a rig consisting of a lightbox, camera, and colour checker card and using free and open-source scripts that run in Python 3.8. This method accurately predicted the lycopene content in tomato fruit and the chlorophyll content in basil leaves.
Why it matches plant phenotyping methods植物画像からサイズ・色を抽出し、リコペンおよびクロロフィル含量を推定するオープンソース手法と画像取得系を開発・実証しており、植物フェノタイピング手法が中心である。
abstractWe provide a set of free and open-source Python scripts that, without any adaptation, are able to perform background correction and colour correction on images using a ColourChecker chart.
Reproduction assets foundThe paper provides authors' public Python scripts for plant image colour/size phenotyping on GitHub, plus a public data deposit (University of Sheffield repository DOI) and an OSF snapshot containing all scripts and data.Code · publicCustom Python Scripts: https://github.com/HarryCWright/PlantSizeClrOpen asset ↗HarryCWright/PlantSizeClrlines:62-83Code · publicSnapshot of all scripts and data is available on Open Science Framework: DOI: 10.17605/OSF.IO/QAYMUOpen asset ↗10.17605/OSF.IO/QAYMUlines:62-83Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
A large amount of training data is usually lacking at the beginning of system development and labeling such a large number of RGB (red, green, blue) images is laborious. Interactive recurrent annotation is beneficial to incrementally gain training images in the stream of the system development and provides an opportunity to reduce human workload. We developed a software package, ROOSTER, to integrate both labeling and prediction in a single user-friendly graphic user interface with interactive deep learning to reduce the laborious human labeling for fast development of machine vision systems. Predictions can be performed under both single-image mode and batch mode for multiple images. The prediction results can be used as the initial image labeling and manually adjusted under a single image mode. Human labeling and machine predictions are visualized on the same image. ROOSTER provides fully automatic labeling for abundantly available initial images of wheat stripe rust to gain essential predictability. The navigation of integrating prediction with labeling benefits human adjustment to iteratively improve predictability. The development of a detection system for wheat stripe rust was presented as a use case to demonstrate the efficiency of using interactive deep learning to develop machine vision systems.
Why it matches plant phenotyping methods植物病害（コムギ縞萎縮病）の画像検出を対象とした対話型画像ラベリング・分類ソフトウェアを開発しており、植物病害状態の取得手法が中心である。
abstractWe developed a software package, ROOSTER, to integrate both labeling and prediction in a single user-friendly graphic user interface with interactive deep learning to reduce the laborious human labeling for fast development of machine vision systems.
Reproduction assets foundThe paper's wheat stripe rust use case is supported by a public Zenodo underlying dataset (400 author-captured training images and use case output files) and public author source code (zzlab.net, GitHub, archived Zenodo). The independent test data from Schirrmann et al. is only available on request.Dataset · publicilability
Underlying data
The independent data used to test ROOSTER was sourced from Schirrmann et al.,10
see here: https://doi.org/10.3389/fpls.2021.469689). Please contact the corresponding author of this article (mschirrmann@atb-potsdam.de) to request
access to the test data if interested.
Zenodo: ROOSTER underlying dataset. https://doi.org/10.5281/zenodo.7530460.11
This project contains the following underlying data:
- RawImages.zip (400 input training images used to develop the model, and captured by the authors of this
article).
- UseCase.zip (use case output files).
Data are available under the terms of the Creative Commons Attribution 4.0 International license (CC-BY 4.0).
Software aOpen asset ↗Zenodo · 10.5281/zenodo.7530460pdf-raw-page:5 lines:1-44Code · publicmages used to develop the model, and captured by the authors of this
article).
- UseCase.zip (use case output files).
Data are available under the terms of the Creative Commons Attribution 4.0 International license (CC-BY 4.0).
Software availability
Software available from: https://zzlab.net/ROOSTER.
Source code available from: https://github.com/12HuYang/ROOSTER.
Archived source code at time of publication: https://doi.org/10.5281/zenodo.7320405.12
License: MIT
Page 5 of 9Open asset ↗GitHub · 12HuYang/ROOSTERpdf-layout-page:5 lines:1-63Code · publicseCase.zip (use case output files).
Data are available under the terms of the Creative Commons Attribution 4.0 International license (CC-BY 4.0).
Software availability
Software available from: https://zzlab.net/ROOSTER.
Source code available from: https://github.com/12HuYang/ROOSTER.
Archived source code at time of publication: https://doi.org/10.5281/zenodo.7320405.12
License: MIT
Page 5 of 9Open asset ↗Zenodo · 10.5281/zenodo.7320405pdf-layout-page:5 lines:1-63Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Flowering is a crucial developing stage for rapeseed ( Brassica napus L.) plants. Flowers develop on the main and branch inflorescences of rapeseed plants and then grow into siliques. The seed yield of rapeseed heavily depends on the total flower numbers per area throughout the whole flowering period. The number of rapeseed inflorescences can reflect the richness of rapeseed flowers and provide useful information for yield prediction. To count rapeseed inflorescences automatically, we transferred the counting problem to a detection task. Then, we developed a low-cost approach for counting rapeseed inflorescences using YOLOv5 with the Convolutional Block Attention Module (CBAM) based on unmanned aerial vehicle (UAV) Red-Green-Blue (RGB) imagery. Moreover, we constructed a Rapeseed Inflorescence Benchmark (RIB) to verify the effectiveness of our model. The RIB dataset captured by DJI Phantom 4 Pro V2.0, including 165 plot images and 60,000 manual labels, is to be released. Experimental results showed that indicators R 2 for counting and the mean Average Precision (mAP) for location were over 0.96 and 92%, respectively. Compared with Faster R-CNN, YOLOv4, CenterNet, and TasselNetV2+, the proposed method achieved state-of-the-art counting performance on RIB and had advantages in location accuracy. The counting results revealed a quantitative dynamic change in the number of rapeseed inflorescences in the time dimension. Furthermore, a significant positive correlation between the actual crop yield and the automatically obtained rapeseed inflorescence total number on a field plot level was identified. Thus, a set of UAV- assisted methods for better determination of the flower richness was developed, which can greatly support the breeding of high-yield rapeseed varieties.
Why it matches plant phenotyping methodsUAV RGB画像と深層学習を用いてナタネの花序数を自動計数する手法を開発し、ベンチマークデータセットで検証しているため、植物表現型取得が中心である。
abstractwe developed a low-cost approach for counting rapeseed inflorescences using YOLOv5 with the Convolutional Block Attention Module (CBAM) based on unmanned aerial vehicle (UAV) Red-Green-Blue (RGB) imagery.
Reproduction assets foundThe paper's Rapeseed Inflorescence Benchmark (RIB) — 165 UAV RGB plot images with 60,000 manual inflorescence labels used for the counting model — is stated as publicly available at the authors' GitHub repository. The YOLOv5 repository is a generic third-party library, not a paper-specific asset.Dataset · publicg. Considering the insufficient data of the whole flowering period, we will increase the sampling frequency in flowering period to better fit the change curve of the number of rapeseed inflorescences in future work.
Data availability statement
Publicly available datasets were analyzed in this study. This data can be found here: https://github.com/LYLWYH/Rapeseed-Data .
Author contributions
All authors made significant contributions to this manuscript. JL, YL, and JQ performed field data collection and wrote the manuscript. JQ and LL designed the experiment. JY, XW, and GL provided suggestions on the experiment design. All authors read and approved the final manuscript.
Acknowledgments
A larOpen asset ↗LYLWYH/Rapeseed-Datalines:437-471Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
Rice plant counting is crucial for many applications in rice production, such as yield estimation, growth diagnosis, disaster loss assessment, etc. Currently, rice counting still heavily relies on tedious and time-consuming manual operation. To alleviate the workload of rice counting, we employed an UAV (unmanned aerial vehicle) to collect the RGB images of the paddy field. Then, we proposed a new rice plant counting, locating, and sizing method (RiceNet), which consists of one feature extractor frontend and 3 feature decoder modules, namely, density map estimator, plant location detector, and plant size estimator. In RiceNet, rice plant attention mechanism and positive-negative loss are designed to improve the ability to distinguish plants from background and the quality of the estimated density maps. To verify the validity of our method, we propose a new UAV-based rice counting dataset, which contains 355 images and 257,793 manual labeled points. Experiment results show that the mean absolute error and root mean square error of the proposed RiceNet are 8.6 and 11.2, respectively. Moreover, we validated the performance of our method with two other popular crop datasets. On these three datasets, our method significantly outperforms state-of-the-art methods. Results suggest that RiceNet can accurately and efficiently estimate the number of rice plants and replace the traditional manual method.
Why it matches plant phenotyping methodsUAV画像からイネ個体の位置・サイズ・個体数を推定する手法RiceNetを開発し、データセット構築と性能検証まで行っており、植物表現型取得が研究の中心です。
abstractwe proposed a new rice plant counting, locating, and sizing method (RiceNet)
Reproduction assets foundThe paper explicitly states that all RiceNet source code is publicly available at the authors' GitHub repository. The URC dataset (355 UAV images, 257,793 labeled points) is described but no explicit public deposit URL is given, so it is not listed as an actionable asset.Code · publicAll the source code of RiceNet is available at https://github.com/xdbai-source/Rice-Plant-Counting .Open asset ↗xdbai-source/Rice-Plant-Countinglines:51-58Code / dataset availability confirmedOpenAlex · arXiv · checked 15 Sept 2026
Plant phenotyping is typically a time-consuming and expensive endeavor, requiring large groups of researchers to meticulously measure biologically relevant plant traits, and is the main bottleneck in understanding plant adaptation and the genetic architecture underlying complex traits at population scale. In this work, we address these challenges by leveraging few-shot learning with convolutional neural networks (CNNs) to segment the leaf body and visible venation of 2,906 P. trichocarpa leaf images obtained in the field. In contrast to previous methods, our approach (i) does not require experimental or image pre-processing, (ii) uses the raw RGB images at full resolution, and (iii) requires very few samples for training (e.g., just eight images for vein segmentation). Traits relating to leaf morphology and vein topology are extracted from the resulting segmentations using traditional open-source image-processing tools, validated using real-world physical measurements, and used to conduct a genome-wide association study to identify genes controlling the traits. In this way, the current work is designed to provide the plant phenotyping community with (i) methods for fast and accurate image-based feature extraction that require minimal training data, and (ii) a new population-scale data set, including 68 different leaf phenotypes, for domain scientists and machine learning researchers. All of the few-shot learning code, data, and results are made publicly available.
Why it matches plant phenotyping methods葉画像から形態・葉脈形質を抽出する少数ショット学習手法を開発し、実測値で検証するとともに、大規模データセットを提供しており、植物フェノタイピング手法が中心である。
abstractwe address these challenges by leveraging few-shot learning with convolutional neural networks (CNNs) to segment the leaf body and visible venation of 2,906 P. trichocarpa leaf images obtained in the field.
Reproduction assets foundThe paper publicly releases its few-shot leaf/vein segmentation code and all phenotyping assets (2,906 leaf images, manual segmentations, model predictions, 68 extracted leaf phenotypes, and SNPs) via two ORNL DOI repositories cited as [31] and [36].Code · publicIn addition to releasing all of the segmentation code on a public GitHub repository [ 31 ] , we are also releasing all of the images, manual segmentations, model predictions, 68 extracted leaf phenotypes, and a new set of SNPs called against the v4 P. trichocarpa genome for 1,419 genotypes on the Oak Ridge National Laboratory Constellation Portal (a public DOI data server) [ 36 ] .Open asset ↗lines:249-258Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Abstract. Understanding mechanisms of tree mortality and geometric patterns of canopy gaps is relevant for robust estimates of carbon stocks and balance in tropical forests, and for assessing how they are responding to climate change. We combined monthly RGB images acquired from an unmanned aerial vehicle with field surveys to identify gaps in an 18-ha permanent plot in an old-growth Central Amazon forest over a period of 28 months. In addition to detecting, we measured the size and shape of gaps, and analyzed their temporal variation and correlation with rainfall. We further described associated modes of tree mortality or branch fall and quantified associated losses of biomass. Overall, the sensitivity of gap detection differed between field surveys and imagery data. In total, we detected 32 gaps either in the images and field, ranging in area from 9 m2 to 835 m2. Relatively small gaps (
Why it matches plant phenotyping methodsUAV画像とフィールド調査を用いて森林キャノピーギャップを検出・定量化し、検出感度を比較しており、植物群落の構造状態を測定する方法の適用・検証が中心的です。
abstractWe combined monthly RGB images acquired from an unmanned aerial vehicle with field surveys to identify gaps
Reproduction assets foundThe paper's R analysis code is publicly archived on Zenodo (10.5281/zenodo.8298693), and the supporting lidar data are openly available on Zenodo (10.5281/zenodo.7636454). Other data (UAV imagery, field gap measurements) are only available upon request from the co-authors.Dataset · publiccoverage, relatively short revisiting time and long data se- available at https://doi.org/10.5281/zenodo.7636454 (Ometto et al.,Open asset ↗Zenodo · 10.5281/zenodo.7636454pdf-page:12 lines:1-50Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Counting the number of grape bunches at an early stage of development offers relevant information to the winegrower about the potential yield to be harvested. However, manual counting on the fields is laborious and time-consuming. Remote sensing, and more precisely unmanned aerial vehicles mounted with RGB or multispectral cameras, facilitate this task rapidly and accurately. This dataset contains 40 RGB videos from a 1.06-ha vineyard located in northern Spain. Moreover, the dataset includes mask labels of visible grape bunches. The videos were acquired throughout four UAV flights with an RGB camera tilted at 60 degrees. Each flight recorded one side of a row of the vineyard. The grape berries were between pea-size (BBCH75) and bunch closure (BBCH79) stage, which is two months before harvesting. No operations other than those usual in a commercial vineyard, such as pruning, cane tying, fertilization, and pest treatment, have been carried out, hence, the dataset presents leaf occlusion. The dataset was gathered and labelled to train object detection and tracking algorithms for grape bunch counting. Furthermore, it eases the work of winegrowers to check the sanitary status of the vineyard.
Why it matches plant phenotyping methodsブドウ房数という植物の収量関連形質をUAV画像から推定するための、ラベル付き動画データセットであり、物体検出・追跡手法の開発を支援する中心的な成果である。
abstractThis dataset contains 40 RGB videos from a 1.06-ha vineyard located in northern Spain. Moreover, the dataset includes mask labels of visible grape bunches.
Reproduction assets foundThis Data in Brief article describes its own public dataset: 40 UAV RGB videos over a vineyard with grape bunch mask annotations (MOTS-style PNG labels) for object detection/tracking and phenotyping, deposited on Zenodo with an explicit direct URL and DOI. This is a paper-specific, publicly available, directly reproducDataset · publice location
Institution: Wageningen University & Research
City/Town/Region: Tomiño, Pontevedra, Galicia
Country: Spain
Latitude and longitude (and GPS coordinates) for collected samples/data:
41°57′18.3″N 8°47′41.9″W
Data accessibility
Repository name: Zenodo
Data identification number: 10.5281/zenodo.7330951
Direct URL to data: https://zenodo.org/record/7330951#.Y3tU3nbMKUk
Related research article
Ariza-Sentís, M., Vélez, S., Baja, H., & Valente, J. (2022). IPPS 2022 Conference Book . 231.
Value of the Data
•
Dataset is useful for researchers interested in instance segmentation, as it allows the detection and tracking of the clusters [2] .
•
Dataset can be employed to count the number of viOpen asset ↗Zenodo · 10.5281/zenodo.7330951lines:1-68Code / dataset availability confirmedOpenAlex · Crossref · checked 8 Sept 2026
A phenotype is the composite of an observable expression of a genome for traits in a given environment. The trajectories of phenotypes computed from an image sequence and timing of important events in a plant’s life cycle can be viewed as temporal phenotypes and indicative of the plant’s growth pattern and vigor. In this paper, we introduce a novel method called FlowerPhenoNet, which uses deep neural networks for detecting flowers from multiview image sequences for high-throughput temporal plant phenotyping analysis. Following flower detection, a set of novel flower-based phenotypes are computed, e.g., the day of emergence of the first flower in a plant’s life cycle, the total number of flowers present in the plant at a given time, the highest number of flowers bloomed in the plant, growth trajectory of a flower, and the blooming trajectory of a plant. To develop a new algorithm and facilitate performance evaluation based on experimental analysis, a benchmark dataset is indispensable. Thus, we introduce a benchmark dataset called FlowerPheno, which comprises image sequences of three flowering plant species, e.g., sunflower, coleus, and canna, captured by a visible light camera in a high-throughput plant phenotyping platform from multiple view angles. The experimental analyses on the FlowerPheno dataset demonstrate the efficacy of the FlowerPhenoNet.
Why it matches plant phenotyping methods花の検出と時系列表現型の抽出を行う深層学習手法を開発し、ベンチマークデータセットと評価も提示しており、植物フェノタイピング手法が中心である。
abstractwe introduce a novel method called FlowerPhenoNet, which uses deep neural networks for detecting flowers from multiview image sequences for high-throughput temporal plant phenotyping analysis.
Reproduction assets foundThe paper publicly releases the FlowerPheno benchmark dataset (17,022 multiview RGB image sequences of sunflower, canna, and coleus with ground-truth flower bounding boxes) and the FlowerPhenoNet source code, both with explicit availability statements and URLs.Dataset · publicThe dataset can be freely downloaded
from https://plantvision.unl.edu/dataset, accessed on 15 February 2021.Open asset ↗plantvision.unl.edupdf-page:4 lines:1-41Code · publicThe source code is available at
https://github.com/localchocotaco/FlowerPhenoNet, accessed on 27 November 2022.Open asset ↗github.com/localchocotaco/FlowerPhenoNetpdf-page:18 lines:1-58Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
The lentil ( Lens culinaris Medik.) is one of the major pulse crops cultivated worldwide. However, in the last decades, lentil cultivation has decreased in many areas surrounding Mediterranean countries due to low yields, new lifestyles, and changed eating habits. Thus, many landraces and local varieties have disappeared, while local farmers are the only custodians of the treasure of lentil genetic resources. Recently, the lentil has been rediscovered to meet the needs of more sustainable agriculture and food systems. Here, we proposed an image analysis approach that, besides being a rapid and non-destructive method, can characterize seed size grading and seed coat morphology. The results indicated that image analysis can give much more detailed and precise descriptions of grain size and shape characteristics than can be practically achieved by manual quality assessment. Lentil size measurements combined with seed coat descriptors and the color attributes of the grains allowed us to develop an algorithm that was able to identify 64 red lentil genotypes collected at ICARDA with an accuracy approaching 98% for seed size grading and close to 93% for the classification of seed coat morphology.
Why it matches plant phenotyping methods画像解析を用いてレンズマメ種子のサイズ、形状、種皮形態、色を非破壊測定・分類する手法を開発し、精度も評価しているため、植物表現型取得が中心です。
abstractwe proposed an image analysis approach that, besides being a rapid and non-destructive method, can characterize seed size grading and seed coat morphology.
Reproduction assets foundThe paper's lentil seed image dataset (64 images of ICARDA genotypes used for the computer vision phenotyping pipeline) is explicitly stated to be publicly available on the authors' GitHub repository. The Data Availability Statement only offers other data upon request, but the image dataset itself has a public URL.Dataset · publicpaigns, and we found that its repositioning contained a non-negligible error for the purposes of the evaluation process here described. This means that the images in some cases showed a different scaling factor that was handled by the algorithms. In Figure 1 , the acquisition setup is shown. The dataset is publicly available at https://github.com/beppe2hd/unconstrainedLentils (accessed on 10 November 2022).
2.1. Plant Materials
In the present study, we analyzed the grains of 64 lentil genotypes received by ICARDA in Lebanon, including 48 varieties released in 19 different countries between 1984 and 2018, 9 germplasm accessions, and 7 elite breeding lines developed at ICARDA in Lebanon ( TablOpen asset ↗https://github.com/beppe2hd/unconstrainedLentilslines:31-42Code / dataset availability confirmedEurope PMC · OpenAlex · checked 8 Sept 2026
Conventional crop height measurements performed using aerial drone images require the 3D reconstruction results of several aerial images obtained through structure from motion. Therefore, they require extensive computation times and their measurement accuracy is not high; if the 3D reconstruction result fails, several aerial photos must be captured again. To overcome these challenges, this study proposes a high-precision measurement method that uses a drone equipped with a monocular camera and real-time kinematic global navigation satellite system (RTK-GNSS) for real-time processing. This method performs high-precision stereo matching based on long-baseline lengths during flight by linking the RTK-GNSS and aerial image capture points. A new calibration method is proposed to further improve the accuracy and stereo matching speed. Throught the comparison between the proposed method and conventional methods in natural world environments, wherein it reduced the error rates by 62.2% and 69.4%, at flight altitudes of 10 and 20 m. Moreover, a depth resolution of 1.6 mm and reduction of 44.4% and 63.0% in the errors were achieved at an altitude of 4.1 m, and the execution time was 88 ms for images with a size of 5472 × 3468 pixels, which is sufficiently fast for real-time measurement.
Why it matches plant phenotyping methodsドローン画像とRTK-GNSSを用いた植物高のリアルタイム測定法を開発し、既存法との精度・速度比較で検証しており、表現型取得手法が中心である。
abstractThrought the comparison between the proposed method and conventional methods in natural world environments, wherein it reduced the error rates by 62.2% and 69.4%
Reproduction assets foundThe preprint declares that the datasets generated/analysed (drone images, GNSS data, and phenotyping measurements) are publicly available in the authors' supplementary materials zip archive. The Middlebury stereo dataset is a generic external resource, not paper-specific.Dataset · publicAvailability of data and material : The datasets generated and/or analysed during the current study are available in the https://nobuharaken.com/NatSciRep/supplementary_materials.zip repository.Open asset ↗nobuharaken.com/NatSciRep/supplementary_materials.ziplines:266-284Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This article describes a dataset of high-resolution visible-spectrum images of safflower ( Carthamus tinctorius L.) plants obtained from a LemnaTec Scanalyser automated phenomics platform along with the associated image analysis output and manually acquired biomass data. This series contains 1832 images of 200 diverse safflower genotypes, acquired at the Plant Phenomics Victoria, Horsham, Victoria, Australia. Two Prosilica GT RGB (red-green-blue) cameras were used to generate 6576 × 4384 pixel portable network graphic (PNG) images. Safflower genotypes were either subjected to a salt treatment (250 mM NaCl) or grown as a control (0 mM NaCl) and imaged daily from 15 to 36 days after sowing. Each snapshot consists of four images collected at a point in time; one of which is taken from above (top-view) and the remainder from the side at either 0°, 120° or 240°. The dataset also includes analysis output quantifying traits and describing phenotypes, as well as manually collected biomass and leaf ion content data. The usage of the dataset is already demonstrated in Thoday-Kennedy et al. (2021) [1]. This dataset describes the early growth differences of diverse safflower genotypes and identified genotypes tolerant or susceptible to salinity stress. This dataset provides detailed image analysis parameters for phenotyping a large population of safflower that can be used for the training of image-based trait identification pipelines for a wide range of crop species.
Why it matches plant phenotyping methods高スループット画像データセットと画像解析出力、形質定量パラメータを提供しており、植物フェノタイピング手法・再利用可能なデータ資源が中心である。
abstractThis article describes a dataset of high-resolution visible-spectrum images of safflower ( Carthamus tinctorius L.) plants obtained from a LemnaTec Scanalyser automated phenomics platform along with the associated image analysis output and manually acquired biomass data.
Reproduction assets foundThe paper is itself a data descriptor for a public safflower salt-response phenotyping dataset (1832 RGB images, image analysis output, and manual biomass/ion data) deposited on Harvard Dataverse, with an explicit direct URL.Dataset · publicains Innovation Park, Agriculture Victoria, Department of Jobs, Precincts and Regions.
City/Town/Region: Horsham, Victoria, Australia
Latitude and longitude (and GPS coordinates, if possible) for collected samples/data: 36° 43’ 13.67” S, 142° 10’ 25.63” E
Data accessibility
Repository name: Harvard Dataverse
Direct URL to data: https://dataverse.harvard.edu/dataverse/H2018006
Related research article
E. Thoday-Kennedy, S. Joshi, H.D. Daetwyler, M. Hayden, D. Hudson, G. Spangenberg, S. Kant, Digital phenotyping to delineate salinity response in safflower genotypes, Frontiers in Plant Science (2021) 12 , 1196
https://doi.org/10.3389/fpls.2021.662498
Value of the Data
•
This dataset is a collecOpen asset ↗Harvard Dataverse · H2018006lines:50-109Code / dataset availability confirmedEurope PMC · Crossref · checked 8 Sept 2026
Objectives A well-known drawback to the implementation of Convolutional Neural Networks (CNNs) for image-recognition is the intensive annotation effort for large enough training dataset, that can become prohibitive in several applications. In this study we focus on applications in the agricultural domain and we implement Deep Learning (DL) techniques for the automatic generation of meaningful synthetic images of plant leaves, which can be used as a virtually unlimited dataset to train or validate specialized CNN models or other image-recognition algorithms. Methods Following an approach based on DL generative models, we introduce a Leaf-to-Leaf Translation (L2L) algorithm, able to produce collections of novel synthetic images in two steps: first, a residual variational autoencoder architecture is used to generate novel synthetic leaf skeletons geometry, starting from binarized skeletons obtained from real leaf images. Second, a translation via Pix2pix framework based on conditional generator adversarial networks (cGANs) reproduces the color distribution of the leaf surface, by preserving the underneath venation pattern and leaf shape. Results The L2L algorithm generates synthetic images of leaves with meaningful and realistic appearance, indicating that it can significantly contribute to expand a small dataset of real images. The performance was assessed qualitatively and quantitatively, by employing a DL anomaly detection strategy which quantifies the anomaly degree of synthetic leaves with respect to real samples. Finally, as an illustrative example, the proposed L2L algorithm was used for generating a set of synthetic images of healthy end diseased cucumber leaves aimed at training a CNN model for automatic detection of disease symptoms. Conclusions Generative DL approaches have the potential to be a new paradigm to provide low-cost meaningful synthetic samples. Our focus was to dispose of synthetic leaves images for smart agriculture applications but, more in general, they can serve for all computer-aided applications which require the representation of vegetation. The present L2L approach represents a step towards this goal, being able to generate synthetic samples with a relevant qualitative and quantitative resemblance to real leaves.
Why it matches plant phenotyping methods植物葉画像を生成し、葉形状・葉脈・表面色を再現する画像生成手法を開発・評価しており、植物フェノタイピング関連の画像解析ワークフローが中心である。
abstractwe implement Deep Learning (DL) techniques for the automatic generation of meaningful synthetic images of plant leaves
Reproduction assets foundThe paper explicitly states that the authors' code and data for the Leaf2Leaf generative leaf-image synthesis pipeline are publicly available on GitHub, which is a paper-specific, actionable asset.Code · publicData Availability: The code and data for reproducibility are available on GitHub ( https://github.com/AleBenfe/Leaf2Leaf ).Open asset ↗AleBenfe/Leaf2Leaflines:135-147Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
Abstract. The SiDroForest (Siberian drone-mapped forest inventory) data collection is an attempt to remedy the scarcity of forest structure data in the circumboreal region by providing adjusted and labeled tree-level and vegetation plot-level data for machine learning and upscaling purposes. We present datasets of vegetation composition and tree and plot level forest structure for two important vegetation transition zones in Siberia, Russia; the summergreen–evergreen transition zone in Central Yakutia and the tundra–taiga transition zone in Chukotka (NE Siberia). The SiDroForest data collection consists of four datasets that contain different complementary data types that together support in-depth analyses from different perspectives of Siberian Forest plot data for multi-purpose applications. i. Dataset 1 provides unmanned aerial vehicle (UAV)-borne data products covering the vegetation plots surveyed during fieldwork (Kruse et al., 2021, https://doi.org/10.1594/PANGAEA.933263). The dataset includes structure-from-motion (SfM) point clouds and red–green–blue (RGB) and red–green–near-infrared (RGN) orthomosaics. From the orthomosaics, point-cloud products were created such as the digital elevation model (DEM), canopy height model (CHM), digital surface model (DSM) and the digital terrain model (DTM). The point-cloud products provide information on the three-dimensional (3D) structure of the forest at each plot.ii. Dataset 2 contains spatial data in the form of point and polygon shapefiles of 872 individually labeled trees and shrubs that were recorded during fieldwork at the same vegetation plots (van Geffen et al., 2021c, https://doi.org/10.1594/PANGAEA.932821). The dataset contains information on tree height, crown diameter, and species type. These tree and shrub individually labeled point and polygon shapefiles were generated on top of the RGB UVA orthoimages. The individual tree information collected during the expedition such as tree height, crown diameter, and vitality are provided in table format. This dataset can be used to link individual information on trees to the location of the specific tree in the SfM point clouds, providing for example, opportunity to validate the extracted tree height from the first dataset. The dataset provides unique insights into the current state of individual trees and shrubs and allows for monitoring the effects of climate change on these individuals in the future.iii. Dataset 3 contains a synthesis of 10 000 generated images and masks that have the tree crowns of two species of larch (Larix gmelinii and Larix cajanderi) automatically extracted from the RGB UAV images in the common objects in context (COCO) format (van Geffen et al., 2021a, https://doi.org/10.1594/PANGAEA.932795). As machine-learning algorithms need a large dataset to train on, the synthetic dataset was specifically created to be used for machine-learning algorithms to detect Siberian larch species.iv. Dataset 4 contains Sentinel-2 (S-2) Level-2 bottom-of-atmosphere processed labeled image patches with seasonal information and annotated vegetation categories covering the vegetation plots (van Geffen et al., 2021b, https://doi.org/10.1594/PANGAEA.933268). The dataset is created with the aim of providing a small ready-to-use validation and training dataset to be used in various vegetation-related machine-learning tasks. It enhances the data collection as it allows classification of a larger area with the provided vegetation classes. The SiDroForest data collection serves a variety of user communities. The detailed vegetation cover and structure information in the first two datasets are of use for ecological applications, on one hand for summergreen and evergreen needle-leaf forests and also for tundra–taiga ecotones. Datasets 1 and 2 further support the generation and validation of land cover remote-sensing products in radar and optical remote sensing. In addition to providing information on forest structure and vegetation composition of the vegetation plots, the third and fourth datasets are prepared as training and validation data for machine-learning purposes. For example, the synthetic tree-crown dataset is generated from the raw UAV images and optimized to be used in neural networks. Furthermore, the fourth SiDroForest dataset contains S-2 labeled image patches processed to a high standard that provide training data on vegetation class categories for machine-learning classification with JavaScript Object Notation (JSON) labels provided. The SiDroForest data collection adds unique insights into remote hard-to-reach circumboreal forest regions.
Why it matches plant phenotyping methodsUAV画像・点群から森林の3D構造や個体樹木の高さ・樹冠径を扱う再利用可能なデータセットを提供し、抽出結果の検証や機械学習に用いるため、植物表現型データ基盤が中心です。
abstractThe SiDroForest (Siberian drone-mapped forest inventory) data collection is an attempt to remedy the scarcity of forest structure data in the circumboreal region by providing adjusted and labeled tree-level and vegetation plot-level data for machine learning and upscaling purposes.
Reproduction assets foundThe paper is a data description paper for the SiDroForest collection; all four datasets (UAV-SfM point clouds/orthomosaics, individually labeled trees, synthetic tree-crown images, Sentinel-2 labeled patches) are published on PANGAEA with explicit public download availability.Dataset · publice future users time when attempting to classify
vegetation of central Siberian and eastern Siberian boreal forests.
5 Data availability
All four datasets of the SiDroForest data collection are published in the PANGAEA data repository and are available for download:
i.
UAV-SfM point clouds, point-cloud products, and orthoimages: https://doi.org/10.1594/PANGAEA.933263 (Kruse
et al., 2021b),
ii.
Individually labeled trees: https://doi.org/10.1594/PANGAEA.932821 (van Geffen et al., 2021c),
iii.
Synthetically created tree-crown dataset: https://doi.org/10.1594/PANGAEA.932795 (van Geffen et al., 2021a),
iv.
Sentinel-2 labeled image patches: https://doi.org/10.1594/PANGAEA.933268 (van Geffen et aOpen asset ↗PANGAEA · 10.1594/PANGAEA.933263lines:557-585Dataset · publicerian boreal forests.
5 Data availability
All four datasets of the SiDroForest data collection are published in the PANGAEA data repository and are available for download:
i.
UAV-SfM point clouds, point-cloud products, and orthoimages: https://doi.org/10.1594/PANGAEA.933263 (Kruse
et al., 2021b),
ii.
Individually labeled trees: https://doi.org/10.1594/PANGAEA.932821 (van Geffen et al., 2021c),
iii.
Synthetically created tree-crown dataset: https://doi.org/10.1594/PANGAEA.932795 (van Geffen et al., 2021a),
iv.
Sentinel-2 labeled image patches: https://doi.org/10.1594/PANGAEA.933268 (van Geffen et al., 2021b).
6 Conclusions
The circumboreal forests are covering large areas on the globe. EverOpen asset ↗PANGAEA · 10.1594/PANGAEA.932821lines:557-585Dataset · publice PANGAEA data repository and are available for download:
i.
UAV-SfM point clouds, point-cloud products, and orthoimages: https://doi.org/10.1594/PANGAEA.933263 (Kruse
et al., 2021b),
ii.
Individually labeled trees: https://doi.org/10.1594/PANGAEA.932821 (van Geffen et al., 2021c),
iii.
Synthetically created tree-crown dataset: https://doi.org/10.1594/PANGAEA.932795 (van Geffen et al., 2021a),
iv.
Sentinel-2 labeled image patches: https://doi.org/10.1594/PANGAEA.933268 (van Geffen et al., 2021b).
6 Conclusions
The circumboreal forests are covering large areas on the globe. Every new forest dataset collected, processed further, and published in a ready-to-use format for a wide range of biolOpen asset ↗PANGAEA · 10.1594/PANGAEA.932795lines:557-585Dataset · publicand orthoimages: https://doi.org/10.1594/PANGAEA.933263 (Kruse
et al., 2021b),
ii.
Individually labeled trees: https://doi.org/10.1594/PANGAEA.932821 (van Geffen et al., 2021c),
iii.
Synthetically created tree-crown dataset: https://doi.org/10.1594/PANGAEA.932795 (van Geffen et al., 2021a),
iv.
Sentinel-2 labeled image patches: https://doi.org/10.1594/PANGAEA.933268 (van Geffen et al., 2021b).
6 Conclusions
The circumboreal forests are covering large areas on the globe. Every new forest dataset collected, processed further, and published in a ready-to-use format for a wide range of biological and ecological applications is therefore quite rare and an important addition for scientific studiOpen asset ↗PANGAEA · 10.1594/PANGAEA.933268lines:557-585Code / dataset availability confirmedEurope PMC · Crossref · checked 13 Sept 2026
Field / plotRGB / grayscaleLeafClassificationDisease symptoms / severity
This article introduces Black gram Plant Leaf Disease (BPLD) dataset, which is scientifically called as Vigna Mungo and is popularly known as Urad in India. It is widely considered to be one of the most significant pulse crops farmed in India. Anthracnose, Leaf Crinkle, Powdery Mildew and Yellow Mosaic diseases shown significant impact on the black gram production and causing financial loss to the farmers. A fusion of image processing and computer vison algorithms are widely used in recent years, for applications in the diagnosis and categorization of diseases that affect plant leaves. To detect and classify plant leaf diseases which degrades the quality of the black gram crop, in early stages, using computer vision algorithms, a Black gram Plant Leaf Disease (BPLD) dataset was created and briefly discussed in this article. The dataset holds a total of 1000 images belongs to five classes: four diseases and one healthy. The images in the presented dataset were captured under the real cultivation fields at Nagayalanka, Krishna, Andhra Pradesh, using camera and mobile phones. After the image acquisition, the images were categorized and processed with the help of agriculture experts. Researchers who utilize image processing, machine learning and particularly deep learning algorithms for automated diagnosis and classification of black gram plant leaf diseases in early stage to assist farmers could benefit from this dataset. The dataset is publicly and freely available at https://doi.org/10.17632/zfcv9fmrgv.3.
Why it matches plant phenotyping methods植物葉の病害状態を画像から認識・分類する公開データセットの構築が中心であり、植物病害フェノタイピング用データセットに該当する。
abstractThis article introduces Black gram Plant Leaf Disease (BPLD) dataset
Reproduction assets foundThe paper's own BPLD dataset (1000 black gram leaf images, 5 classes) is publicly deposited on Mendeley Data with explicit direct URL and DOI.Dataset · publicThe dataset is publicly and freely available at https://doi.org/10.17632/zfcv9fmrgv.3Open asset ↗10.17632/zfcv9fmrgv.3lines:1-61Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
Few-shot learning (FSL) is suitable for plant-disease recognition due to the shortage of data. However, the limitations of feature representation and the demanding generalization requirements are still pressing issues that need to be addressed. The recent studies reveal that the frequency representation contains rich patterns for image understanding. Given that most existing studies based on image classification have been conducted in the spatial domain, we introduce frequency representation into the FSL paradigm for plant-disease recognition. A discrete cosine transform module is designed for converting RGB color images to the frequency domain, and a learning-based frequency selection method is proposed to select informative frequencies. As a post-processing of feature vectors, a Gaussian-like calibration module is proposed to improve the generalization by aligning a skewed distribution with a Gaussian-like distribution. The two modules can be independent components ported to other networks. Extensive experiments are carried out to explore the configurations of the two modules. Our results show that the performance is much better in the frequency domain than in the spatial domain, and the Gaussian-like calibrator further improves the performance. The disease identification of the same plant and the cross-domain problem, which are critical to bring FSL to agricultural industry, are the research directions in the future.
Why it matches plant phenotyping methods植物病害状態を画像から認識するための周波数領域表現、周波数選択、分布較正手法を開発しており、病害表現型の抽出が研究の中心である。
abstractwe introduce frequency representation into the FSL paradigm for plant-disease recognition.
Reproduction assets foundThe paper's plant-disease recognition experiments are built on the PlantVillage dataset, which the authors explicitly state is publicly available at a Mendeley Data URL. No author analysis code, models, or checkpoints are disclosed.Dataset · publicThe PlantVillage dataset is available at https://data.mendeley.com/datasets/tywbtsjrjv/1 (accessed on 20 July 2022).Open asset ↗tywbtsjrjvlines:830-838Code / dataset availability confirmedOpenAlex · arXiv · checked 15 Sept 2026
Plant phenotyping is a central task in agriculture, as it describes plants' growth stage, development, and other relevant quantities. Robots can help automate this process by accurately estimating plant traits such as the number of leaves, leaf area, and the plant size. In this paper, we address the problem of joint semantic, plant instance, and leaf instance segmentation of crop fields from RGB data. We propose a single convolutional neural network that addresses the three tasks simultaneously, exploiting their underlying hierarchical structure. We introduce task-specific skip connections, which our experimental evaluation proves to be more beneficial than the usual schemes. We also propose a novel automatic post-processing, which explicitly addresses the problem of spatially close instances, common in the agricultural domain because of overlapping leaves. Our architecture simultaneously tackles these problems jointly in the agricultural context. Previous works either focus on plant or leaf segmentation, or do not optimise for semantic segmentation. Results show that our system has superior performance compared to state-of-the-art approaches, while having a reduced number of parameters and is operating at camera frame rate.
Why it matches plant phenotyping methodsRGB画像から植物・葉のインスタンスを分割し、葉数・葉面積・植物サイズなどの形質推定を可能にするCNNと後処理を開発・評価しており、フェノタイピング手法が中心である。
abstractWe propose a single convolutional neural network that addresses the three tasks simultaneously, exploiting their underlying hierarchical structure.
Reproduction assets foundThe paper's authors explicitly publish their analysis/segmentation code (HAPT) at a public GitHub repository, supporting reproducibility of the paper's plant/leaf instance segmentation experiments.Code · publici) our novel scheme for the skip connections better exploits the hierarchical connections between the tasks;
and (iii) our improved post-processing achieves superior performance with respect to common state-of-the-art methods,
while yielding end-to-end inference in real-time.
To support reproducibility, our code is published at https://github.com/PRBonn/HAPT .
II Related Work
Over the last years, we have seen significant progress in the application of vision-based methods for semantic and instance segmentation in real agricultural settings.
Deep learning architectures in the agricultural domain usually target only one specific task, while we address jointly semantic, plant instanceOpen asset ↗PRBonn/HAPTlines:56-70Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
Protecting the future of forests in the United States and other countries depends in part on our ability to monitor and map forest health conditions in a timely fashion to facilitate management of emerging threats and disturbances over a multitude of spatial scales. Remote sensing data and technologies have contributed to our ability to meet these needs, but existing methods relying on supervised classification are often limited to specific areas by the availability of imagery or training data, as well as model transferability. Scaling up and operationalizing these methods for general broadscale monitoring and mapping may be promoted by using simple models that are easily trained and projected across space and time with widely available imagery. Here, we describe a new model that classifies high resolution (~1 m2) 3-band red, green, blue (RGB) imagery from a single point in time into one of four color classes corresponding to tree crown condition or health: green healthy crowns, red damaged or dying crowns, gray damaged or dead crowns, and shadowed crowns where the condition status is unknown. These Tree Crown Health (TCH) models trained on data from the United States (US) Department of Agriculture, National Agriculture Imagery Program (NAIP), for all 48 States in the contiguous US and spanning years 2012 to 2019, exhibited high measures of model performance and transferability when evaluated using randomly withheld testing data (n = 122 NAIP state x year combinations; median overall accuracy 0.89-0.90; median Kappa 0.85-0.86). We present examples of how TCH models can detect and map individual tree mortality resulting from a variety of nationally significant native and invasive forest insects and diseases in the US. We conclude with discussion of opportunities and challenges for extending and implementing TCH models in support of broadscale monitoring and mapping of forest health.
Why it matches plant phenotyping methods樹冠の健康状態を画像から分類・推定するモデルを開発し、精度と空間・時系列移転性を検証しており、植物状態の取得手法が中心である。
abstractHere, we describe a new model that classifies high resolution (~1 m2) 3-band red, green, blue (RGB) imagery from a single point in time into one of four color classes corresponding to tree crown condition or health
Reproduction assets foundThe paper's Tree Crown Health (TCH) training data, model constants, and analysis code (R optimization routines, GEE JavaScript, and ArcGIS Python raster function) are explicitly deposited publicly on Dryad, making them paper-specific, public, and directly actionable.Code · publicData Availability: All data and code are available from Dryad, https://doi.org/10.5061/dryad.wm37pvmpp .Open asset ↗Dryad · 10.5061/dryad.wm37pvmpplines:221-237Code / dataset availability confirmedarXiv · OpenAlex · checked 14 Sept 2026
We propose a novel hybrid cable-based robot with manipulator and camera for high-accuracy, medium-throughput plant monitoring in a vertical hydroponic farm and, as an example application, demonstrate non-destructive plant mass estimation. Plant monitoring with high temporal and spatial resolution is important to both farmers and researchers to detect anomalies and develop predictive models for plant growth. The availability of high-quality, off-the-shelf structure-from-motion (SfM) and photogrammetry packages has enabled a vibrant community of roboticists to apply computer vision for non-destructive plant monitoring. While existing approaches tend to focus on either high-throughput (e.g. satellite, unmanned aerial vehicle (UAV), vehicle-mounted, conveyor-belt imagery) or high-accuracy/robustness to occlusions (e.g. turn-table scanner or robot arm), we propose a middle-ground that achieves high accuracy with a medium-throughput, highly automated robot. Our design pairs the workspace scalability of a cable-driven parallel robot (CDPR) with the dexterity of a 4 degree-of-freedom (DoF) robot arm to autonomously image many plants from a variety of viewpoints. We describe our robot design and demonstrate it experimentally by collecting daily photographs of 54 plants from 64 viewpoints each. We show that our approach can produce scientifically useful measurements, operate fully autonomously after initial calibration, and produce better reconstructions and plant property estimates than those of over-canopy methods (e.g. UAV). As example applications, we show that our system can successfully estimate plant mass with a Mean Absolute Error (MAE) of 0.586g and, when used to perform hypothesis testing on the relationship between mass and age, produces p-values comparable to ground-truth data (p=0.0020 and p=0.0016, respectively).
Why it matches plant phenotyping methods植物の多視点画像取得、SfM再構成、質量推定を中核とするロボット型フェノタイピング手法の開発・実証であり、単なる生物学的測定ではない。
abstractWe describe our robot design and demonstrate it experimentally by collecting daily photographs of 54 plants from 64 viewpoints each.
Corn is an important human food crop and animal feed source. Purity of corn seed is critical to yield and marketing. Screening of corn ears is an important but time-consuming and labor-intensive task in seed production. In recent years, deep learning has made great achievements in tasks such as image classification, object detection, face recognition, etc. In this paper , a method combining convolutional neural network VGG16 and machine vision to quickly classify different varieties of corn using corn ear images is proposed. By collecting RGB images of corn ears with intact phenotypic traits of 5 varieties, a data set containing 1000 images was constructed, and divided into training set, validation set and test set according to the ratio of 7:2:1. By improving the fully connected layer structure of the VGG16 network, optimizing the training parameters, and using transfer learning and data enhancement techniques, the optimal performance model was obtained after training all layers of the VGG16, and the accuracy rate reached 98.00% on the test set. Under the same experimental conditions, comparing the three methods of training from scratch, pre-feature extraction and only training the fully connected layer, the accuracy rates obtained were 94.00%, 96.88%, and 94.00%, respectively. The improved model achieved the highest classification accuracy rate and stable performance. In the experiments, the effects of network parameters on the model classification results were also discussed. The experiment showed that the phenotypic characteristics of the corn ears could better realize the classification and identification of different varieties of corn, which provides a reference for the intelligent sorting of corn seed production.
Why it matches plant phenotyping methodsトウモロコシ穂の画像から品種を分類・識別する機械視覚とCNN手法の開発が中心で、植物器官の表現型特徴を用いた再利用可能な解析ワークフローである。
abstracta method combining convolutional neural network VGG16 and machine vision to quickly classify different varieties of corn using corn ear images is proposed.
Reproduction assets foundThe preprint's Data Availability Statement deposits the paper's own corn ear image dataset (1000 RGB images of 5 varieties used for VGG16 classification) on Mendeley Data with a public DOI, making it a paper-specific, publicly actionable phenotyping image dataset.Dataset · publicThe datasets generated and/or analysed during the current study are available in the [Xu, jinpu (2022), “five_corn_ears”, Mendeley Data, V2,] repository, http://dx.doi.org/10.17632/hb3hbsz6t9.1Open asset ↗Mendeley Data · 10.17632/hb3hbsz6t9.1lines:382-409Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
RGB / grayscaleLeafSegmentationGrowth / time-series analysisGrowth / development / phenology
Predicting plant growth is a fundamental challenge that can be employed to analyze plants and further make decisions to have healthy plants with high yields. Deep learning has recently been showing its potential to address this challenge in recent years, however, there are still two issues. First, image-based plant growth prediction is currently taken either from time series or image generation viewpoints, resulting in a flexible learning framework and clear predictions, respectively. Second, deep learning-based algorithms are notorious to require a large-scale dataset to obtain a competing performance but collecting enough data is time-consuming and expensive. To address the issues, we consider the plant growth prediction from both viewpoints with two new time-series data augmentation algorithms. To be more specific, we raise a new framework with a length-changeable time-series processing unit to generate images flexibly. A generative adversarial loss is utilized to optimize our model to obtain high-quality images. Furthermore, we first recognize three key points to perform time-series data augmentation and then put forward T-Mixup and T-Copy-Paste. T-Mixup fuses images from a different time pixel-wise while T-Copy-Paste makes new time-series images with a different background by reusing individual leaves extracted from the existing dataset. We perform our method in a public dataset and achieve superior results, such as the generated RGB images and instance masks securing an average PSNR of 27.53 and 27.62, respectively, compared to the previously best 26.55 and 26.92.
Why it matches plant phenotyping methods植物画像から成長状態を予測・生成する深層学習フレームワークと、時系列データ拡張手法を開発しており、画像およびインスタンスマスクによる表現型取得・解析が研究の中心である。
abstractTo address the issues, we consider the plant growth prediction from both viewpoints with two new time-series data augmentation algorithms.
Reproduction assets foundThe paper's plant growth prediction experiments use the public KOMATSUNA plant phenotyping dataset (Uchiyama et al., 2017), which the authors explicitly state is publicly available via the linked IEEE document. No author analysis code, trained models, or paper-specific supplementary data assets are described with a de-Dataset · publicPublicly available datasets were analyzed in this study. This data can be found here: https://ieeexplore.ieee.org/document/8265449 .Open asset ↗8265449lines:805-840Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 8 Sept 2026
Currently, there are no free databases of 3D point clouds and images for seedling phenotyping. Therefore, this paper describes a platform for seedling scanning using 3D Lidar with which a database was acquired for use in plant phenotyping research. In total, 362 maize seedlings were recorded using an RGB camera and a SICK LMS4121R-13000 laser scanner with angular resolutions of 45° and 0.5° respectively. The scanned plants are diverse, with seedling captures ranging from less than 10 cm to 40 cm, and ranging from 7 to 24 days after planting in different light conditions in an indoor setting. The point clouds were processed to remove noise and imperfections with a mean absolute precision error of 0.03 cm, synchronized with the images, and time-stamped. The database includes the raw and processed data and manually assigned stem and leaf labels. As an example of a database application, a Random Forest classifier was employed to identify seedling parts based on morphological descriptors, with an accuracy of 89.41%.
Why it matches plant phenotyping methods3D LiDARとRGBによる苗のスキャン基盤を開発し、植物フェノタイピング用データベースを構築・検証しているため、取得手法と再利用可能なデータセットが中心である。
abstractthis paper describes a platform for seedling scanning using 3D Lidar with which a database was acquired for use in plant phenotyping research.
Reproduction assets foundThe paper's maize seedling LiDAR phenotyping database (362 plants, 7 campaigns, raw/processed point clouds with stem/leaf labels, RGB images, rosbags) is publicly released on OSF across seven campaign-specific repositories, explicitly stated in the Data Availability Statement and Table 3. The GitHub links (sick_scan, uDataset · publicOur generated dataset is available online at: 1st campaign: https://osf.io/fcgwk/ ;Open asset ↗osf · fcgwklines:435-442Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Intelligent detection and localization of mature citrus fruits is a critical challenge in developing an automatic harvesting robot. Variable illumination conditions and different occlusion states are some of the essential issues that must be addressed for the accurate detection and localization of citrus in the orchard environment. In this paper, a novel method for the detection and localization of mature citrus using improved You Only Look Once (YOLO) v5s with binocular vision is proposed. First, a new loss function (polarity binary cross-entropy with logit loss) for YOLO v5s is designed to calculate the loss value of class probability and objectness score, so that a large penalty for false and missing detection is applied during the training process. Second, to recover the missing depth information caused by randomly overlapping background participants, Cr-Cb chromatic mapping, the Otsu thresholding algorithm, and morphological processing are successively used to extract the complete shape of the citrus, and the kriging method is applied to obtain the best linear unbiased estimator for the missing depth value. Finally, the citrus spatial position and posture information are obtained according to the camera imaging model and the geometric features of the citrus. The experimental results show that the recall rates of citrus detection under non-uniform illumination conditions, weak illumination, and well illumination are 99.55%, 98.47%, and 98.48%, respectively, approximately 2-9% higher than those of the original YOLO v5s network. The average error of the distance between the citrus fruit and the camera is 3.98 mm, and the average errors of the citrus diameters in the 3D direction are less than 2.75 mm. The average detection time per frame is 78.96 ms. The results indicate that our method can detect and localize citrus fruits in the complex environment of orchards with high accuracy and speed. Our dataset and codes are available at https://github.com/AshesBen/citrus-detection-localization.
Why it matches plant phenotyping methods収穫ロボット向けの位置検出が主目的だが、果実形状・姿勢・3D直径を画像から抽出し、精度を検証する技術開発が中心であり、再利用可能な植物器官形質の推定に該当する。
abstracta novel method for the detection and localization of mature citrus using improved You Only Look Once (YOLO) v5s with binocular vision is proposed.
Reproduction assets foundThe authors explicitly state that their citrus image dataset (4855 binocular image groups with depth maps) and analysis code are publicly available on GitHub, matching the allowed URL.Dataset · publicnt occlusion conditions in natural orchards. Future work will focus on few-shot learning and reduce the number of citrus fruits in the training dataset to improve citrus detection and localization.
Data availability statement
The original contributions presented in this study are publicly available. This data can be found here: https://github.com/AshesBen/citrus-detection-localization .
Author contributions
All authors contributed to the method and result of the study, dataset generation, model training and testing, analysis of results, and the drafting, revising, and approving of the contents of the manuscript.
Funding
We acknowledged support from the Natural Science Foundation of GuangdongOpen asset ↗AshesBen/citrus-detection-localizationlines:335-356Code · public98 mm, and the average errors of the citrus diameters in the 3D direction are less than 2.75 mm. The average detection time per frame is 78.96 ms. The results indicate that our method can detect and localize citrus fruits in the complex environment of orchards with high accuracy and speed. Our dataset and codes are available at https://github.com/AshesBen/citrus-detection-localization .
Keywords: citrus detection, citrus localization, binocular vision, YOLO v5s, loss function
status released display-pdf yes is-olf no is-manuscript no is-preprint no is-journal-matter no is-scanned no is-retracted no
Received 2022 Jun 18; Accepted 2022 Jul 12; Collection date 2022.
IntroductionOpen asset ↗AshesBen/citrus-detection-localizationlines:1-28Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Deep convolutional neural networks (DCNNs) have been successfully applied to plant disease detection. Unlike most existing studies, we propose feeding a DCNN CIE Lab instead of RGB color coordinates. We modified an Inception V3 architecture to include one branch specific for achromatic data (L channel) and another branch specific for chromatic data (AB channels). This modification takes advantage of the decoupling of chromatic and achromatic information. Besides, splitting branches reduces the number of trainable parameters and computation load by up to 50% of the original figures using modified layers. We achieved a state-of-the-art classification accuracy of 99.48% on the Plant Village dataset and 76.91% on the Cropped-PlantDoc dataset.
Why it matches plant phenotyping methods植物病害画像から病害状態を推定するDCNN手法を開発し、複数データセットで精度検証しているため、植物フェノタイピング手法が中心です。
abstractwe propose feeding a DCNN CIE Lab instead of RGB color coordinates.
Reproduction assets foundThe authors explicitly state their source code and raw result files for the plant disease classification experiments are publicly available on GitHub.Code · publicoc dataset, we trained all DCNNs for
240 epochs starting with a learning rate of 0.01 and de-
caying 1% per epoch. We split the Cropped-PlantDoc
dataset into 65% of the samples for training, 15% for
validation and 20% for testing.
Our source code written for these experiments
and their raw result files are publicly available
at https://github.com/joaopauloschuler/two-branch-plant-disease/ .
58Open asset ↗joaopauloschuler/two-branch-plant-diseasepdf-raw-page:4 lines:1-120Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
The total boll count from a plant is one of the most important phenotypic traits for cotton breeding and is also an important factor for growers to estimate the final yield. With the recent advances in deep learning, many supervised learning approaches have been implemented to perform phenotypic trait measurement from images for various crops, but few studies have been conducted to count cotton bolls from field images. Supervised learning models require a vast number of annotated images for training, which has become a bottleneck for machine learning model development. The goal of this study is to develop both fully supervised and weakly supervised deep learning models to segment and count cotton bolls from proximal imagery. A total of 290 RGB images of cotton plants from both potted (indoor and outdoor) and in-field settings were taken by consumer-grade cameras and the raw images were divided into 4350 image tiles for further model training and testing. Two supervised models (Mask R-CNN and S-Count) and two weakly supervised approaches (WS-Count and CountSeg) were compared in terms of boll count accuracy and annotation costs. The results revealed that the weakly supervised counting approaches performed well with RMSE values of 1.826 and 1.284 for WS-Count and CountSeg, respectively, whereas the fully supervised models achieve RMSE values of 1.181 and 1.175 for S-Count and Mask R-CNN, respectively, when the number of bolls in an image patch is less than 10. In terms of data annotation costs, the weakly supervised approaches were at least 10 times more cost efficient than the supervised approach for boll counting. In the future, the deep learning models developed in this study can be extended to other plant organs, such as main stalks, nodes, and primary and secondary branches. Both the supervised and weakly supervised deep learning models for boll counting with low-cost RGB images can be used by cotton breeders, physiologists, and growers alike to improve crop breeding and yield estimation.
Why it matches plant phenotyping methods綿花ボール数という植物表現型を画像からセグメンテーション・計数する深層学習手法を開発し、教師あり・弱教師ありモデルの精度とアノテーションコストを比較しており、表現型取得手法が研究の中心である。
abstractThe goal of this study is to develop both fully supervised and weakly supervised deep learning models to segment and count cotton bolls from proximal imagery.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe dataset used in this study can be accessed at the following link: https://doi.org/10.6084/m9.figshare.19665096.v1 .Open asset ↗figshare · 10.6084/m9.figshare.19665096.v1lines:228-245Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
Maize leaf diseases significantly reduce maize yield; therefore, monitoring and identifying the diseases during the growing season are crucial. Some of the current studies are based on images with simple backgrounds, and the realistic field settings are full of background noise, making this task challenging. We collected low-cost red, green, and blue (RGB) images from our experimental fields and public dataset, and they contain a total of four categories, namely, southern corn leaf blight (SCLB), gray leaf spot (GLS), southern corn rust (SR), and healthy (H). This article proposes a model different from convolutional neural networks (CNNs) based on transformer and self-attention. It represents visual information of local regions of images by tokens, calculates the correlation (called attention) of information between local regions with an attention mechanism, and finally integrates global information to make the classification. The results show that our model achieves the best performance compared to five mainstream CNNs at a meager computational cost, and the attention mechanism plays an extremely important role. The disease lesions information was effectively emphasized, and the background noise was suppressed. The proposed model is more suitable for fine-grained maize leaf disease identification in a complex background, and we demonstrated this idea from three perspectives, namely, theoretical, experimental, and visualization.
Why it matches plant phenotyping methodsトウモロコシ葉の病徴を画像から識別する深層学習手法を開発・比較し、複雑な背景での病害状態推定を中心的に評価しているため。
abstractThis article proposes a model different from convolutional neural networks (CNNs) based on transformer and self-attention.
Reproduction assets foundThe authors explicitly state that their dataset, code, and all trained models are publicly available on their GitHub repository, which directly supports this paper's maize leaf disease image classification analysis.Code · publicWe have made our dataset and code, as well as all the trained models of this article, publicly available in the site: https://github.com/haiyang-qian/code-and-dataset .Open asset ↗haiyang-qian/code-and-datasetlines:371-417Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 14 Sept 2026
Stripe rust (caused by Puccinia striiformis f. sp. tritici) is one of the most devastating diseases of wheat and causes large-scale epidemics and severe yield loss. Applying fungicides during early epidemic development is crucial to controlling the disease but is often challenged by resource-limited human visual scouting. Deep learning has the potential to process images and videos captured from affordable devices to empower high-throughput phenotyping for early detection of stripe rust for timely application of fungicides and improve control efficiency. Here, we developed RustNet, a neural network-based image classifier, for efficiently monitoring fields for stripe rust. RustNet was built on a ResNet-18 architecture pre-trained with ImageNet Large-Scale Visual Recognition Challenge (ILSVRC) dataset using transfer learning. RGB images and videos of multiple wheat fields with different wheat types (winter and spring wheat), conditions (irrigated and non-irrigated), and locations were acquired using smartphones or unmanned aerial vehicles near the canopy. A semi-automated image labeling approach was conducted to improve labeling efficiency by combining automated machine labeling and human correction. Cross-validations across multiple categories (sensor platforms, wheat types, and locations) achieved Area Under Curve from 0.72 to 0.87. Independent validation on a published dataset from Germany achieved accuracies ranging from 0.79 to 0.86. The visualization of the last convolutional layer of RustNet demonstrated the identification of pixels with stripe rust. RustNet is freely available at https://zzlab.net/RustNet.
Why it matches plant phenotyping methods小麦のストライプさび病という植物状態を画像から検出する深層学習手法を開発し、複数条件で交差検証・独立検証しており、表現型取得手法が研究の中心です。
abstractDeep learning has the potential to process images and videos captured from affordable devices to empower high-throughput phenotyping for early detection of stripe rust
Reproduction assets foundThe authors publicly released the RustNet trained model (integrated into Rooster) and the Rooster semi-automated image-labeling software used to produce this paper's wheat stripe rust phenotyping analysis, with explicit availability statements and URLs.Code · publicwere calculated based on its gradient to the disease prediction, which
was equal to the weights of the last fully connected layer. A ReLU function was applied to filter
negative input (Figure 2b). A python package was used to visualize the Grad-CAM
(https://github.com/jacobgil/pytorch-grad-cam).Image labeling
Rooster software (https://github.com/12HuYang/Rooster) was used to label tile images into
disease or non-disease classes by easily clicking it with a mouse. Rooster was developed with
python and can split raw images into tiles (e.g., 224 × 224 pixels) by defining column and row
numbers. A semi-automatic image labeling that combines machine- and human labeling was
implemented in RoOpen asset ↗12HuYang/Roosterpdf-raw-page:18 lines:1-30Code / dataset availability confirmedOpenAlex · arXiv · checked 8 Sept 2026
As an essential prerequisite task in image-based plant phenotyping, leaf segmentation has garnered increasing attention in recent years. While self-supervised learning is emerging as an effective alternative to various computer vision tasks, its adaptation for image-based plant phenotyping remains rather unexplored. In this work, we present a self-supervised leaf segmentation framework consisting of a self-supervised semantic segmentation model, a color-based leaf segmentation algorithm, and a self-supervised color correction model. The self-supervised semantic segmentation model groups the semantically similar pixels by iteratively referring to the self-contained information, allowing the pixels of the same semantic object to be jointly considered by the color-based leaf segmentation algorithm for identifying the leaf regions. Additionally, we propose to use a self-supervised color correction model for images taken under complex illumination conditions. Experimental results on datasets of different plant species demonstrate the potential of the proposed self-supervised framework in achieving effective and generalizable leaf segmentation.
Why it matches plant phenotyping methods植物画像から葉領域を抽出する自己教師ありセグメンテーション手法の開発が中心であり、画像ベース植物フェノタイピングの方法論に該当する。
abstractAs an essential prerequisite task in image-based plant phenotyping, leaf segmentation has garnered increasing attention in recent years.
Reproduction assets foundThe paper's authors explicitly state that the developed code and datasets (including their Cannabis leaf image dataset used for self-supervised leaf segmentation phenotyping) will be made publicly available at their GitHub repository, which matches the allowed URL.Code · publicThe developed code and datasets will be made publicly available on
https://github.com/lxfhfut/Self-Supervised-Leaf-SegmentationOpen asset ↗lxfhfut/Self-Supervised-Leaf-Segmentationpdf-page:2 lines:1-36Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
The pixels segmentation of high resolution RGB images into background, green vegetation and senescent vegetation classes is a first step often required before estimating key traits of interest including the vegetation fraction, the green area index, or to characterize the sanitary state of the crop. We developed the SegVeg model for semantic segmentation of RGB images into the three classes of interest. It is based on a U-net model that separates the vegetation from the background. It was trained over a very large and diverse dataset. The vegetation pixels are then classified using a SVM shallow machine learning technique trained over pixels extracted from grids applied to images. The performances of the SegVeg model are then compared to a three classes U-net model trained using weak supervision over RGB images with predicted pixels by SegVeg as groundtruth masks. Results show that the SegVeg model allows to segment accurately the three classes, with however some confusion mainly between the background and the senescent vegetation, particularly over the dark and bright parts of the images. The U-net model achieves similar performances, with some slight degradation observed for the green vegetation: the SVM pixel-based approach provides more precise delineation of the green and senescent patches as compared to the convolutional nature of U-net. The use of the components of several color spaces allows to better classify the vegetation pixels into green and senescent ones. Finally, the models are used to predict the fraction of the three classes over the grids pixels or the whole images. Results show that the green fraction is very well estimated (R 2 =0.94) by the SegVeg model, while the senescent and background fractions show slightly degraded performances (R 2 =0.70 and 0.73, respectively). We made SegVeg publicly available as a ready-to-use script, as well as the entire dataset, rendering segmentation accessible to a broad audience by requiring neither manual annotation nor knowledge, or at least, offering a pre-trained model to more specific use.
Why it matches plant phenotyping methodsRGB画像から緑色・枯死植生を分割し、植生割合や緑色面積指数などの植物形質推定に用いるSegVeg手法を開発・比較検証し、モデルとデータセットを公開しているため、植物フェノタイピング手法が中心である。
abstractWe developed the SegVeg model for semantic segmentation of RGB images into the three classes of interest.
Reproduction assets foundThe paper's SegVeg segmentation scripts and the annotated LITERAL/PHENOMOBILE/P2S2 pixel dataset with segmentation masks are publicly released via the authors' GitHub repository, with Zenodo links specified there.Code · publicuthors declare that there is no conflict of interest regarding the publication of this article.
376
Data Availability
377
Upon acceptance of the paper, SegVeg pixels dataset, images and their corresponding segmentation
378
masks will be publicly available. All the SegVeg scripts for computation and analysis are also public:
379
https://github.com/mserouar/SegVeg. For simplicity, dataset download links (including Zenodo)
380
will be specified in the above repository.
381
References
382
[1] T. Sakamoto et al., “An alternative method using digital cameras for continuous monitoring of
383
crop status,” Agricultural and Forest Meteorology, vol. 154-155, pp. 113–126, Mar. 2012, issn:
384
016Open asset ↗mserouar/SegVegpdf-raw-page:25 lines:1-69Dataset · publicAmong the 441 annotated grids (Table 4), the unsure classes represented about 8% of the total
185
number of pixels, for the PHENOMOBILE dataset the integrated flashes provided better pixel
186
interpretation leading to fewer confusions. This dataset is publicly available on Zenodo following
187
this link https://github.com/mserouar/SegVeg (When published linked with ORCID).
188
Table 4: Distribution of labeled pixel for the three datasets.
Datasets
Nb. of
labelled
patches
Nb. of
labelled
pixels
% Classes
Green
Veg.
Sen.
Veg.
Background
Green /
Sen. Veg.
Unsure
Unknown Other
LITERAL 68 4260 46.5 15.8 15.0 13.1 9.5 0.1
PHENOMOBILE 173 8266 40.3 31.1 27.6 0.1 0.8 0Open asset ↗mserouar/SegVegpdf-raw-page:10 lines:1-92Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Sunflowers are agricultural seed crops that can be used for essential edible oils and ornamental purposes. This cash crop is primarily cultivated in North and South America. Sunflower crops are prone to various diseases, insects, and nematodes, resulting in a wide range of production losses. Digital image processing and computer vision approaches have been widely utilized to categorize and detect plant diseases including leaves, fruits, and flowers over the last few decades. Early diagnosis of infections in sunflowers helps to prevent them from spreading throughout the farm and reducing financial losses to the farmers. This article offers a resourceful dataset of sunflower leaves and flowers that will help the researchers in developing effective algorithms for the detection of diseases. The dataset contains healthy and affected sunflower leaves and flowers with downy mildew, gray mold, and leaf scars. The images were captured manually between 25 th to 29 th November 2021 from the demonstration farm of Bangladesh Agricultural Research Institute (BARI) at Gazipur in cooperation with its one domain expert when the sunflower plants were about to bloom and the maximum diseases can be found. The dataset is hosted by the Department of Computer Science and Engineering, National Institute of Textile Engineering and Research (NITER), Bangladesh and freely available at https://data.mendeley.com/datasets/b83hmrzth8/1.
Why it matches plant phenotyping methodsヒマワリ葉・花の画像データセットを提供し、病害状態の画像ベース推定・分類を可能にすることが中心であるため、植物フェノタイピング用データセットとして含める。
abstractThis article offers a resourceful dataset of sunflower leaves and flowers that will help the researchers in developing effective algorithms for the detection of diseases.
Reproduction assets foundThe paper's own sunflower disease image dataset (467 original + 1668 augmented images) is publicly hosted on Mendeley Data with an explicit direct link and DOI, directly reproducing the paper's phenotyping measurements.Dataset · publicnstitute (BARI) at Gazipur in cooperation with its one domain expert when the sunflower plants were about to bloom and the maximum diseases can be found. The dataset is hosted by the Department of Computer Science and Engineering, National Institute of Textile Engineering and Research (NITER), Bangladesh and freely available at https://data.mendeley.com/datasets/b83hmrzth8/1 .
Keywords: Agriculture, Sunflower dataset, Computer vision, Deep learning
status released display-pdf yes is-olf no is-manuscript no is-preprint no is-journal-matter no is-scanned no is-retracted no
Received 2022 Jan 30; Revised 2022 Mar 5; Accepted 2022 Mar 7; Collection date 2022 Jun.
Specification Table
Subject
CompuOpen asset ↗lines:1-55Code / dataset availability confirmedbioRxiv · OpenAlex · Europe PMC · checked 8 Sept 2026
The first draft of the Arabidopsis genome was released more than 20 years ago and despite intensive molecular research, more than 30% of Arabidopsis genes remained uncharacterized or without an assigned function. This is in part due to gene redundancy within gene families or the essential nature of genes, where their deletion results in lethality (i.e., the dark genome). High-throughput plant phenotyping (HTPP) offers an automated and unbiased approach to characterize subtle or transient phenotypes resulting from gene redundancy or inducible gene silencing; however, commercial HTPP platforms remain unaffordable. Here we describe the design and implementation of OPEN leaf, an open-source HTPP system with cloud connectivity and remote bilateral communication to facilitate data collection, sharing and processing. OPEN leaf, coupled with the SMART imaging processing package was able to consistently document and quantify dynamic morphological changes over time at the whole rosette level and also at leaf-specific resolution when plants experienced changes in nutrient availability. The modular design of OPEN leaf allows for additional sensor integration. Notably, our data demonstrate that VIS sensors remain underutilized and can be used in high-throughput screens to identify characterize previously unidentified phenotypes in a leaf-specific manner. Significance StatementMany bottlenecks exist in high-throughput phenotyping involving computing power for processing and a lack of focus on abiotic stresses that has prevented an advancement in phenotyping on par with genotyping. Therefore, we create an automated HTP system that performs nutrient studies on Arabidopsis thaliana with cloud-based image processing that quantifies plant traits at a whole and leaf-level.
Why it matches plant phenotyping methodsOPEN leafは、葉単位の形態形質を画像から自動取得・定量するオープンソース高スループット表現型解析システムの設計・実装が中心であり、明確に収載対象です。
abstractHere we describe the design and implementation of OPEN leaf, an open-source HTPP system with cloud connectivity and remote bilateral communication to facilitate data collection, sharing and processing.
Reproduction assets foundThe paper's image-analysis pipeline (SMART) used for rosette and leaf-specific phenotyping is explicitly released as public source code on GitHub and as a prepackaged Docker container. Phenotype data tables are only in supplementary material without a public URL, and other code repos (OPEN Controller, OPEN-leaf-cloud)'Code · public209 available as source code on GitHub (https://github.com/Computational-Open asset ↗pdf-page:8 lines:1-41Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · bioRxiv · checked 8 Sept 2026
Abstract Background Color distortion is an inherent problem in image-based phenotyping systems that are illuminated by artificial light. This distortion is problematic when examining plants because it can cause data to be incorrectly interpreted. One of the leading causes of color distortion is the non-uniform spectral and spatial distribution of artificial light. However, color correction algorithms currently used in plant phenotyping assume that a single and uniform illuminant causes color distortion. These algorithms are consequently inadequate to correct the local color distortion caused by multiple illuminants common in plant phenotyping systems, such as fluorescent tubes and LED light arrays. We describe here a color constancy algorithm, ColorBayes, based on Bayesian inference that corrects local color distortions. The algorithm estimates the local illuminants using the Bayes’ rule, the maximum a posteriori, the observed image data, and prior illuminant information. The prior is obtained from light measurements and Macbeth ColorChecker charts located on the scene. Results The ColorBayes algorithm improved the accuracy of plant color on images taken by an indoor plant phenotyping system. Compared with existing approaches, it gave the most accurate metric results when correcting images from a dataset of Arabidopsis thaliana images. The software is available at https://github.com/diloc/Color_correction.git .
Why it matches plant phenotyping methods植物フェノタイピング画像の局所的な色歪みを補正するアルゴリズムを開発し、既存手法およびArabidopsis画像データセットで精度を検証しているため、方法が中心的である。
abstractWe describe here a color constancy algorithm, ColorBayes, based on Bayesian inference that corrects local color distortions.
Reproduction assets foundThe paper's ColorBayes color-correction algorithm code is explicitly stated as publicly available on the authors' GitHub repository. The green fabric ground-truth image dataset and Arabidopsis plant image datasets are described but no public deposit is stated for them.Code · publicThe code of the color correction algorithm is available for reuse at https://github.com/diloc/Color_correction.git.Open asset ↗diloc/Color_correctionpdf-page:15 lines:1-82Code / dataset availability confirmedEurope PMC · OpenAlex · checked 8 Sept 2026
This work focuses on the problem of non-contact measurement for vegetables in agricultural automation. The application of computer vision in assisted agricultural production significantly improves work efficiency due to the rapid development of information technology and artificial intelligence. Based on object detection and stereo cameras, this paper proposes an intelligent method for vegetable recognition and size estimation. The method obtains colorful images and depth maps with a binocular stereo camera. Then detection networks classify four kinds of common vegetables (cucumber, eggplant, tomato and pepper) and locate six points for each object. Finally, the size of vegetables is calculated using the pixel position and depth of keypoints. Experimental results show that the proposed method can classify four kinds of common vegetables within 60 cm and accurately estimate their diameter and length. The work provides an innovative idea for solving the vegetable's non-contact measurement problems and can promote the application of computer vision in agricultural automation.
Why it matches plant phenotyping methods野菜の長さ・直径という植物器官形質を、ステレオカメラ、深度画像、キーポイント検出で非接触推定する手法が研究の中心であるため。
abstractThis work focuses on the problem of non-contact measurement for vegetables in agricultural automation.
Reproduction assets foundThe authors publicly released both the vegetable keypoint dataset (1600 COCO-format images with ROI boxes and six keypoints) and the implementation code for their size estimation method on GitHub. Labelme is a generic third-party annotation tool and is excluded.Code · publicThe implementation code of our size estimation method can be accessed on https://github.com/BourneZ130/VegetableDetection , accessed on 15 February 2022.Open asset ↗BourneZ130/VegetableDetectionlines:76-141Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Cassava is a crucial food and nutrition security crop cultivated by small-scale farmers and it can survive in a brutal environment. It is a significant source of carbohydrates in African countries. Sometimes, Cassava crops can be infected by leaf diseases, affecting the overall production and reducing farmers’ income. The existing Cassava disease research encounters several challenges, such as poor detection rate, higher processing time, and poor accuracy. This research provides a comprehensive learning strategy for real-time Cassava leaf disease identification based on enhanced CNN models (ECNN). The existing Standard CNN model utilizes extensive data processing features, increasing the computational overhead. A depth-wise separable convolution layer is utilized to resolve CNN issues in the proposed ECNN model. This feature minimizes the feature count and computational overhead. The proposed ECNN model utilizes a distinct block processing feature to process the imbalanced images. To resolve the color segregation issue, the proposed ECNN model uses a Gamma correction feature. To decrease the variable selection process and increase the computational efficiency, the proposed ECNN model uses global average election polling with batch normalization. An experimental analysis is performed over an online Cassava image dataset containing 6256 images of Cassava leaves with five disease classes. The dataset classes are as follows: class 0: “Cassava Bacterial Blight (CBB)”; class 1: “Cassava Brown Streak Disease (CBSD)”; class 2: “Cassava Green Mottle (CGM)”; class 3: “Cassava Mosaic Disease (CMD)”; and class 4: “Healthy”. Various performance measuring parameters, i.e., precision, recall, measure, and accuracy, are calculated for existing Standard CNN and the proposed ECNN model. The proposed ECNN classifier significantly outperforms and achieves 99.3% accuracy for the balanced dataset. The test findings prove that applying a balanced database of images improves classification performance.
Why it matches plant phenotyping methodsカッサバ葉の病害状態を画像から分類する改良CNNを開発し、既存CNNとの性能比較・検証を行っており、植物表現型取得法が中心である。
abstractThis research provides a comprehensive learning strategy for real-time Cassava leaf disease identification based on enhanced CNN models (ECNN).
Reproduction assets foundThe paper's plant-phenotyping measurements (cassava leaf disease classification experiments) are based on a public Kaggle image dataset of 6256 cassava leaf images across five disease classes. No author analysis code, trained model checkpoints, or supplementary code repository is disclosed in the supplied blocks.Dataset · publicKaggle Online Dataset, Cassava Leaf Disease. Available online: https://www.kaggle.com/c/cassava-leaf-disease-classification
(accessed on 14 December 2021).Open asset ↗Kaggle · cassava-leaf-disease-classificationpdf-page:19 lines:1-47Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
Wheat head detection can measure wheat traits such as head density and head characteristics. Standard wheat breeding largely relies on manual observation to detect wheat heads, yielding a tedious and inefficient procedure. The emergence of affordable camera platforms provides opportunities for deploying computer vision (CV) algorithms in wheat head detection, enabling automated measurements of wheat traits. Accurate wheat head detection, however, is challenging due to the variability of observation circumstances and the uncertainty of wheat head appearances. In this work, we propose a simple but effective idea-dynamic color transform (DCT)-for accurate wheat head detection. This idea is based on an observation that modifying the color channel of an input image can significantly alleviate false negatives and therefore improve detection results. DCT follows a linear color transform and can be easily implemented as a dynamic network. A key property of DCT is that the transform parameters are data-dependent such that illumination variations can be corrected adaptively. The DCT network can be incorporated into any existing object detectors. Experimental results on the Global Wheat Detection Dataset (GWHD) 2021 show that DCT can achieve notable improvements with negligible overhead parameters. In addition, DCT plays an important role in our solution participating in the Global Wheat Challenge (GWC) 2021, where our solution ranks the first on the initial public leaderboard, with an Average Domain Accuracy (ADA) of 0.821, and obtains the runner-up reward on the final private testing set, with an ADA of 0.695.
Why it matches plant phenotyping methods小麦穂の画像検出による形質取得を目的とし、照明変動に対応する動的色変換ネットワークを開発・評価しているため、植物フェノタイピング手法が中心である。
abstractIn this work, we propose a simple but effective idea-dynamic color transform (DCT)-for accurate wheat head detection.
Reproduction assets foundThe paper's experiments are performed on the GWHD 2021 wheat head detection dataset, which the authors explicitly state is publicly available at the Zenodo record. This is the phenotyping image/annotation dataset directly used for the paper's measurements. No authors' analysis code or trained model checkpoints are madeDataset · publicThe GWHD 2021 dataset is available at https://zenodo.org/record/5092309 .Open asset ↗zenodo · 5092309lines:327-432Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
The ability to quantify the colour of fruit is extremely important for a number of applied fields including plant breeding, postharvest assessment, and consumer quality assessment. Fruit and other plant organs display highly complex colour patterning. This complexity makes it challenging to compare and contrast colours in an accurate and time efficient manner. Multiple methodologies exist that attempt to digitally quantify colour in complex images but these either require a priori knowledge to assign colours to a particular bin, or fit the colours present within segment of the colour space into a single colour value using a thresholding approach. A major drawback of these methodologies is that, through the process of averaging, they tend to synthetically generate values that may not exist within the context of the original image. As such, to date there are no published methodologies that assess colour patterning using a data driven approach. In this study we present a methodology to acquire and process digital images of biological samples that contain complex colour gradients. The CIE (Commission Internationale de l'Eclairage/International Commission on Illumination) ΔE2000 formula was used to determine the perceptually unique colours (PUC) within images of fruit containing complex colour gradients. This process, on average, resulted in a 98% reduction in colour values from the number of unique colours (UC) in the original image. This data driven procedure summarised the colour data values while maintaining a linear relationship with the normalised colour complexity contained in the total image. A weighted ΔE2000 distance metric was used to generate a distance matrix and facilitated clustering of summarised colour data. Clustering showed that our data driven methodology has the ability to group these complex images into their respective binomial families while maintaining the ability to detect subtle colour differences. This methodology was also able to differentiate closely related images. We provide a high quality set of complex biological images that span the visual spectrum that can be used in future colorimetric research to benchmark colourimetric method development.
Why it matches plant phenotyping methods植物組織・果実画像の複雑な色彩パターンを取得・定量化・分類する画像解析手法の開発が中心であり、植物器官の色という表現型を直接扱うため。
abstractIn this study we present a methodology to acquire and process digital images of biological samples that contain complex colour gradients.
Reproduction assets foundThe paper's segmented fruit/tuber colorimetry images are publicly deposited on Kaggle by the first author, and the Supplementary Data Sheet 1 explicitly contains the pseudocode for the region-growing, recolouring, and weighted ΔE2000 algorithms used in the analysis.Dataset · publicPublicly available copies of these images can be found at https://www.kaggle.com/petermcatee/colorimetry-standard-fruit-images .Open asset ↗Kaggle · petermcatee/colorimetry-standard-fruit-imageslines:306-318Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Phenotyping is considered a significant bottleneck impeding fast and efficient crop improvement. Similar to many crops, Brassica napus, an internationally important oilseed crop, suffers from low genetic diversity, and will require exploitation of diverse genetic resources to develop locally adapted, high yielding and stress resistant cultivars. A pilot study was completed to assess the feasibility of using indoor high-throughput phenotyping (HTP), semi-automated image processing, and machine learning to capture the phenotypic diversity of agronomically important traits in a diverse B. napus breeding population, SKBnNAM, introduced here for the first time. The experiment comprised 50 spring-type B. napus lines, grown and phenotyped in six replicates under two treatment conditions (control and drought) over 38 days in a LemnaTec Scanalyzer 3D facility. Growth traits including plant height, width, projected leaf area, and estimated biovolume were extracted and derived through processing of RGB and NIR images. Anthesis was automatically and accurately scored (97% accuracy) and the number of flowers per plant and day was approximated alongside relevant canopy traits (width, angle). Further, supervised machine learning was used to predict the total number of raceme branches from flower attributes with 91% accuracy (linear regression and Huber regression algorithms) and to identify mild drought stress, a complex trait which typically has to be empirically scored (0.85 area under the receiver operating characteristic curve, random forest classifier algorithm). The study demonstrates the potential of HTP, image processing and computer vision for effective characterization of agronomic trait diversity in B. napus, although limitations of the platform did create significant variation that limited the utility of the data. However, the results underscore the value of machine learning for phenotyping studies, particularly for complex traits such as drought stress resistance.
Why it matches plant phenotyping methods屋内ハイスループット表現型解析、画像処理、機械学習を用いて作物形質を抽出・予測し、プラットフォーム性能も評価しているため、方法が研究の中心である。
abstractA pilot study was completed to assess the feasibility of using indoor high-throughput phenotyping (HTP), semi-automated image processing, and machine learning to capture the phenotypic diversity of agronomically important traits
Reproduction assets foundThe paper's full LemnaTec HTP image dataset (RGB, NIR, FLUOR, HYP images of 50 B. napus founder lines) is openly available at the authors' P2IRC USask repository, directly reproducing this paper's phenotyping measurements. The genomevis tool concerns SNP/genotype visualization, not phenotyping, and no analysis code is,Dataset · publicThe full image dataset is openly available at https://p2irc-data-dev.usask.ca/dataset/10.1109.SciDataManager.2020.7284788 (Dataset name: P2IRC Flagship 1 Data).Open asset ↗P2IRC Flagship 1 Data · 10.1109.SciDataManager.2020.7284788lines:323-329Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Robust and automated segmentation of leaves and other backgrounds is a core prerequisite of most approaches in high-throughput field phenotyping. So far, the possibilities of deep learning approaches for this purpose have not been explored adequately, partly due to a lack of publicly available, appropriate datasets. This study presents a workflow based on DeepLab v3+ and on a diverse annotated dataset of 190 RGB (350 x 350 pixels) images. Images of winter wheat plants of 76 different genotypes and developmental stages have been acquired throughout multiple years at high resolution in outdoor conditions using nadir view, encompassing a wide range of imaging conditions. Inconsistencies of human annotators in complex images have been quantified, and metadata information of camera settings has been included. The proposed approach achieves an intersection over union (IoU) of 0.77 and 0.90 for plants and soil, respectively. This outperforms the benchmarked machine learning methods which use Support Vector Classifier and/or Random Forrest. The results show that a small but carefully chosen and annotated set of images can provide a good basis for a powerful segmentation pipeline. Compared to earlier methods based on machine learning, the proposed method achieves better performance on the selected dataset in spite of using a deep learning approach with limited data. Increasing the amount of publicly available data with high human agreement on annotations and further development of deep neural network architectures will provide high potential for robust field-based plant segmentation in the near future. This, in turn, will be a cornerstone of data-driven improvement in crop breeding and agricultural practices of global benefit.
Why it matches plant phenotyping methods植物の高スループット圃場フェノタイピングに向けた画像セグメンテーション手法、注釈付きデータセット、ベンチマーク評価を中心に扱っているため採用。
abstractRobust and automated segmentation of leaves and other backgrounds is a core prerequisite of most approaches in high-throughput field phenotyping.
Reproduction assets foundThe paper's EWS wheat segmentation dataset (images, annotations, metadata) is publicly deposited on ETH research collection, and the authors' analysis code is publicly available on GitHub, both explicitly stated in the data availability statement.Code · publicThe code is available at: https://github.com/RadekZenkl/EWS .Open asset ↗github.com/RadekZenkl/EWSlines:807-879Code / dataset availability confirmedEurope PMC · bioRxiv · checked 9 Sept 2026
Convolutional neural networks (CNNs) and deep learning are powerful and robust tools for ecological applications. CNNs can perform very well in various tasks, especially for visual tasks and image data. Image segmentation (the classification of all pixels in images) is one such task and can for example be used to assess forest vertical and horizontal structure. While such methods have been suggested, widespread adoption in ecological research has been slow, likely due to technical difficulties in implementation of CNNs and lack of toolboxes for ecologists. Here, we present R package imageseg which implements a workflow for general-purpose image segmentation using CNNs and the U-Net architecture in R. The workflow covers data (pre)processing, model training, and predictions. We illustrate the utility of the package with two models for forest structural metrics: tree canopy density and understory vegetation density. We trained the models using large and diverse training data sets from a variety of forest types and biomes, consisting of 3288 canopy images (both canopy cover and hemispherical canopy closure photographs) and 1468 understory vegetation images. Overall classification accuracy of the models was high with a Dice score of 0.91 for the canopy model and 0.89 for the understory vegetation model (assessed with 821 and 367 images, respectively), indicating robustness to variation in input images and good generalization strength across forest types and biomes. The package and its workflow allow simple yet powerful assessments of forest structural metrics using pre-trained models. Furthermore, the package facilitates custom image segmentation with multiple classes and based on color or grayscale images, e.g. in cell biology or for medical images. Our package is free, open source, and available from CRAN. It will enable easier and faster implementation of deep learning-based image segmentation within R for ecological applications and beyond.
Why it matches plant phenotyping methods森林の樹冠密度・下層植生密度という植物群落の構造形質を画像分割で推定するRパッケージとワークフローを開発・検証しており、植物フェノタイピング手法が中心である。
abstractHere, we present R package imageseg which implements a workflow for general-purpose image segmentation using CNNs and the U-Net architecture in R.
Reproduction assets foundThe paper's imageseg R package (source code, pre-trained canopy/understory models, and training/testing image data) is publicly available on CRAN and GitHub, with explicit availability statements.Code · publicSource
code and the development version are available from GitHub
(https://github.com/EcoDynIZW/imageseg). Links to the pre-trained models, classification
examples and data used for model training and testing are available from:
https://github.com/EcoDynIZW/imageseg.Open asset ↗EcoDynIZW/imagesegpdf-page:9 lines:1-46Model / weights · publicLinks to the pre-trained models, classification
examples and data used for model training and testing are available from:
https://github.com/EcoDynIZW/imageseg.Open asset ↗EcoDynIZW/imagesegpdf-page:9 lines:1-46Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Monitoring fruit growth is useful when estimating final yields in advance and predicting optimum harvest times. However, observing fruit all day at the farm via RGB images is not an easy task because the light conditions are constantly changing. In this paper, we present CROP (Central Roundish Object Painter). The method involves image segmentation by deep learning, and the architecture of the neural network is a deeper version of U-Net. CROP identifies different types of central roundish fruit in an RGB image in varied light conditions, and creates a corresponding mask. Counting the mask pixels gives the relative two-dimensional size of the fruit, and in this way, time-series images may provide a non-contact means of automatically monitoring fruit growth. Although our measurement unit is different from the traditional one (length), we believe that shape identification potentially provides more information. Interestingly, CROP can have a more general use, working even for some other roundish objects. For this reason, we hope that CROP and our methodology yield big data to promote scientific advancements in horticultural science and other fields.
Why it matches plant phenotyping methodsRGB画像から果実をセグメンテーションし、画素数で果実サイズと成長を時系列推定する手法開発が中心である。
abstractIn this paper, we present CROP (Central Roundish Object Painter). The method involves image segmentation by deep learning, and the architecture of the neural network is a deeper version of U-Net.
Reproduction assets foundThe authors explicitly state that their trained CROP neural network dictionaries and related programs are publicly available on GitHub. The paper's image datasets (Data_Fruit from Pixabay, farm pear images) are described but the annotations/datasets themselves are not deposited at a public URL; the USDA ARS image and CCode · publicthors have read and agreed to the published version of the manuscript.
Funding
This research received no external funding.
Institutional Review Board Statement
Not applicable.
Informed Consent Statement
Not applicable.
Data Availability Statement
Our trained neural network CROP and the related programs are available on GitHub ( https://github.com/MotohisaFukuda/CROP , accessed on 20 October 2021). Some of the images used for the qualitative analysis in this paper came from the image gallery organized by United States Department of Agriculture, Agricultural Research Service ( https://www.ars.usda.gov/oc/images/image-gallery , accessed on 20 October 2021). Data_Fruit the training dataset inOpen asset ↗MotohisaFukuda/CROPlines:95-151Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
High-throughput phenotyping systems with unmanned aerial vehicles (UAVs) enable observation of crop lines in the field. In this study, we show the ability of time-course monitoring of canopy height (CH) to identify quantitative trait loci (QTLs) and to characterise their pleiotropic effect on various traits. We generated a digital surface model from low-altitude UAV-captured colour digital images and investigated CH data of rice multi-parental advanced generation inter-cross (MAGIC) lines from tillering and heading to maturation. Genome-wide association studies (GWASs) using the CH data and haplotype information of the MAGIC lines revealed 11 QTLs for CH. Each QTL showed haplotype effects on different features of CH such as stage-specificity and constancy. Haplotype analysis revealed relationships at the QTL level between CH and, vegetation fraction and leaf colour [derived from UAV red–green–blue (RGB) data], and CH and yield-related traits. Noticeably, haplotypes with canopy lowering effects at qCH1-4, qCH2, and qCH10-2 increased the ratio of panicle weight to leaf and stem weight, suggesting biomass allocation to grain yield or others through growth regulation of CH. Allele mining using gene information with eight founders of the MAGIC lines revealed the possibility that qCH1-4 contains multiple alleles of semi-dwarf 1 (sd1), the IR-8 allele of which significantly contributed to the “green revolution” in rice. This use of remote-sensing-derived phenotyping data into genetics using the MAGIC lines gives insight into how rice plants grow, develop, and produce grains in phenology and provides information on effective haplotypes for breeding with ideal plant architecture and grain yield.
Why it matches plant phenotyping methodsUAV画像からデジタル表面モデルと時系列のイネ群落高を抽出し、遺伝解析に利用する高スループット表現型計測が研究の中心であるため。
abstractHigh-throughput phenotyping systems with unmanned aerial vehicles (UAVs) enable observation of crop lines in the field.
Reproduction assets foundThe paper's supplementary material explicitly contains the paper-specific phenotyping datasets (Supplementary Data 1: canopy height data; Supplementary Data 2: haplotype data; Supplementary Data 3-4: haplotype counts and time-course effects) used for the haplotype-based GWAS, and is publicly available at the Frontiers'Supplement · publicknowledgments
We thank Emi Abe, Aono Yuko, Terumi Satou, Megumi Suzuki, Yukari Shimazu, Tomomi Koguchi, Miho Shoji, and Mitsue Ito for the field support, and Matthew Shenton for scientific discussion and English editing of the manuscript.
Supplementary Material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2021.715184/full#supplementary-material
Click here for additional data file.
Click here for additional data file.
References
Chen Y., Sidhu H. S., Kaviani M., McElroy M. S., Pozniak C. J., Navabi A. (2019). Application of image-based phenotyping tools to identify QTL for in-field winter survival of winter wheat ( TritiOpen asset ↗lines:290-333Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Quantifying symptoms of tar spot of corn has been conducted through visual-based estimations of the proportion of leaf area covered by the pathogenic structures generated by Phyllachora maydis (stromata). However, this traditional approach is costly in terms of time and labor, as well as prone to human subjectivity. An objective and accurate method, which is also time and labor-efficient, is of an urgent need for tar spot surveillance and high-throughput disease phenotyping. Here, we present the use of contour-based detection of fungal stromata to quantify disease intensity using Red-Green-Blue (RGB) images of tar spot-infected corn leaves. Image blocks ( n = 1,130) generated by uniform partitioning the RGB images of leaves, were analyzed for their number of stromata by two independent, experienced human raters using ImageJ (visual estimates) and the experimental stromata contour detection algorithm (SCDA; digital measurements). Stromata count for each image block was then categorized into five classes and tested for the agreement of human raters and SCDA using Cohen's weighted kappa coefficient (κ). Adequate agreements of stromata counts were observed for each of the human raters to SCDA (κ = 0.83) and between the two human raters (κ = 0.95). Moreover, the SCDA was able to recognize "true stromata," but to a lesser extent than human raters (average median recall = 90.5%, precision = 89.7%, and Dice = 88.3%). Furthermore, we tracked tar spot development throughout six time points using SCDA and we obtained high agreement between area under the disease progress curve (AUDPC) shared by visual disease severity and SCDA. Our results indicate the potential utility of SCDA in quantifying stromata using RGB images, complementing the traditional human, visual-based disease severity estimations, and serve as a foundation in building an accurate, high-throughput pipeline for the scoring of tar spot symptoms.
Why it matches plant phenotyping methodsRGB画像からトウモロコシ葉のタースポット病徴（病斑・病害強度）を自動定量する輪郭検出アルゴリズムを開発・検証しており、植物病害表現型の取得法が中心である。
abstractHere, we present the use of contour-based detection of fungal stromata to quantify disease intensity using Red-Green-Blue (RGB) images of tar spot-infected corn leaves.
Reproduction assets foundThe paper's data availability statement explicitly states the original contributions (RGB leaf images, image blocks, and SCDA-related data) are publicly available at a Purdue PURR repository URL, which is an allowed URL.Dataset · publicThe original contributions presented in the study are publicly available. This data can be found here: https://purr.purdue.edu/publications/3820/2Open asset ↗purr.purdue.edu · publications/3820/2lines:669-700Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Summary Male fertility in maize involves complex genetic programming affected by environmental factors. Evaluating the presence and proportion of fertile anthers is crucial for agronomic purposes. Anthers in maize emerge from male-only florets, and quantifying anther exertion is a key indicator of male fertility; however, traditional manual scoring methods are subjective. To address this limitation, we developed an automated method, Tasselyzer , for large-scale analysis. This image-based program uses the PlantCV platform to provide a quantitative assessment of anther exertion, capturing regional differences within the tassel based on the distinct color of anthers. We successfully applied this method to diverse maize lines to demonstrate its utility for research and breeding programs. Significance Statement Tasselyzer is a novel image-based segmentation tool for automated, large-scale measurement of anther exertion and the impact of genetic and environmental variation on male fertility in maize.
Why it matches plant phenotyping methodsトウモロコシの葯突出を画像ベースで自動定量する手法とソフトウェアを開発し、複数系統への適用も実施しており、植物フェノタイピング手法が研究の中心です。
abstractwe developed an automated method, Tasselyzer , for large-scale analysis.
Reproduction assets foundThe paper explicitly states that Tasselyzer code, original and pseudo-colored tassel images, and the full image sets are publicly available on GitHub and Zenodo, directly supporting the paper's maize anther exertion phenotyping analysis.Dataset · publicThe
full image sets were used in this study are available within Zenodo at
https://doi.org/10.5281/zenodo.5525073 (Teng et al., 2021).Open asset ↗10.5281/zenodo.5525073pdf-page:15 lines:1-61Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Recently, deep-learning techniques have become the foundations for many breakthroughs in the automated identification of plant diseases. In the agricultural sector, many recent visual-computer approaches use deep-learning models. In this approach, a novel predictive analytics methodology to identify Tobacco Mosaic Virus (TMV) and Pepper Huasteco Yellow Vein Virus (PHYVV) visual symptoms on Jalapeño pepper ( Capsicum annuum L.) leaves by using image-processing and deep-learning classification models is presented. The proposed image-processing approach is based on the utilization of Normalized Red-Blue Vegetation Index (NRBVI) and Normalized Green-Blue Vegetation Index (NGBVI) as new RGB-based vegetation indices, and its subsequent Jet pallet colored version NRBVI-Jet NGBVI-Jet as pre-processing algorithms. Furthermore, four standard pre-trained deep-learning architectures, Visual Geometry Group-16 (VGG-16), Xception, Inception v3, and MobileNet v2, were implemented for classification purposes. The objective of this methodology was to find the most accurate combination of vegetation index pre-processing algorithms and pre-trained deep- learning classification models. Transfer learning was applied to fine tune the pre-trained deep- learning models and data augmentation was also applied to prevent the models from overfitting. The performance of the models was evaluated using Top-1 accuracy, precision , recall , and F1-score using test data. The results showed that the best model was an Xception-based model that uses the NGBVI dataset. This model reached an average Top-1 test accuracy of 98.3%. A complete analysis of the different vegetation index representations using models based on deep-learning architectures is presented along with the study of the learning curves of these deep-learning models during the training phase.
Why it matches plant phenotyping methods葉の可視症状をRGB画像処理と深層学習で識別する手法を開発・比較しており、植物病害状態の表現型推定が中心である。
abstracta novel predictive analytics methodology to identify Tobacco Mosaic Virus (TMV) and Pepper Huasteco Yellow Vein Virus (PHYVV) visual symptoms on Jalapeño pepper ( Capsicum annuum L.) leaves by using image-processing and deep-learning classification models is presented.
Reproduction assets foundThe paper publicly releases its authors' analysis code on GitHub and its generated leaf image datasets (RGB plus vegetation-index versions) on Zenodo, both with explicit availability statements.Code · publicThe source code of this article is publicly released and can be downloaded from https://github.com/jrmillan1983/PHYVV_TMV_CNN .Open asset ↗jrmillan1983/PHYVV_TMV_CNNlines:371-472Dataset · publicThe datasets generated during and/or analyzed during the current study are available from https://doi.org/10.5281/zenodo.5500727 (accessed on 19 September 2021).Open asset ↗zenodo · 10.5281/zenodo.5500727lines:474-476Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Kenaf ( Hibiscus cannabinus L.) is an industrial crop used as a raw material in various fields and is cultivated worldwide. Compared to high potential for its utilization, breeding sector is not vigorous partially due to laborous breeding procedure. Thus, efficient breeding methods are required for varieties that can adapt to various environments and obtain optimal production. For that, identifying kenaf’s characteristics is very important during the breeding process. Here, we investigated if RGB based vegetative index (VI) could be associated with traits for biomass. We used 20 varieties and germplasm of kenaf and RGB images taken with unmanned aerial vehicles (UAVs) for field selection in early and late growth stage. In addition, measuring the stem diameter and the number of nodes confirmed whether the vegetative index value obtained from the RGB image could infer the actual plant biomass. Based on the results, it was confirmed that the individual surface area and estimated plant height, which were identified from the RGB image, had positive correlations with the stem diameter and node number, which are actual growth indicators of the rate of growth further, biomass could also be estimated based on this. Moreover, it is suggested that VIs have a high correlation with actual growth indicators; thus, the biomass of kenaf could be predicted. Interstingly, those traits showing high correlation in the late stage had very low correlations in the early stage. To sum up, the results in the current study suggest a more efficient breeding method by reducing labor and resources required for breeding selection by the use of RGB image analysis obtained by UAV. This means that considerable high-quality research could be performed even with a tight budget. Furthermore, this method could be applied to crop management, which is done with other vegetative indices using a multispectral camera.
Why it matches plant phenotyping methodsUAVのRGB画像から植生指数、表面積、推定草丈を抽出し、茎径・節数・バイオマスを推定する画像ベース表現型計測法を評価しており、方法の適用と妥当性確認が中心です。
abstractHere, we investigated if RGB based vegetative index (VI) could be associated with traits for biomass.
Reproduction assets foundThe article states that all relevant data (kenaf phenotyping measurements and UAV RGB-derived traits/VIs) are available on the Open Science Framework (osf.io/tfamn), which is a paper-specific public deposit. However, the only permitted URL in this audit is the FAOSTAT statistics page, which is a generic external data源,Dataset · publicAll relevant data are available on the Open Science Framework ( osf.io/tfamn ).Open asset ↗lines:584-612Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Understanding temporal accumulation of soybean above-ground biomass (AGB) has the potential to contribute to yield gains and the development of stress-resilient cultivars. Our main objectives were to develop a high-throughput phenotyping method to predict soybean AGB over time and to reveal its temporal quantitative genomic properties. A subset of the SoyNAM population (n = 383) was grown in multi-environment trials and destructive AGB measurements were collected along with multispectral and RGB imaging from 27 to 83 days after planting (DAP). We used machine-learning methods for phenotypic prediction of AGB, genomic prediction of breeding values, and genome-wide association studies (GWAS) based on random regression models (RRM). RRM enable the study of changes in genetic variability over time and further allow selection of individuals when aiming to alter the general response shapes over time. AGB phenotypic predictions were high (R2 = 0.92–0.94). Narrow-sense heritabilities estimated over time ranged from low to moderate (from 0.02 at 44 DAP to 0.28 at 33 DAP). AGB from adjacent DAP had highest genetic correlations compared to those DAP further apart. We observed high accuracies and low biases of prediction indicating that genomic breeding values for AGB can be predicted over specific time intervals. Genomic regions associated with AGB varied with time, and no genetic markers were significant in all time points evaluated. Thus, RRM seem a powerful tool for modeling the temporal genetic architecture of soybean AGB and can provide useful information for crop improvement. This study provides a basis for future studies to combine phenotyping and genomic analyses to understand the genetic architecture of complex longitudinal traits in plants.
Why it matches plant phenotyping methods大豆地上部バイオマスを時系列のRGB・マルチスペクトル画像から予測するハイスループット表現型解析法を開発し、予測精度も評価しているため、表現型取得・推定法が中心的です。
abstractOur main objectives were to develop a high-throughput phenotyping method to predict soybean AGB over time
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 1 ) previously reported in the literature to correlate with crop biomass ( Babar et al.Open asset ↗lines:305-313Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Cosegmentation is a newly emerging computer vision technique used to segment an object from the background by processing multiple images at the same time. Traditional plant phenotyping analysis uses thresholding segmentation methods which result in high segmentation accuracy. Although there are proposed machine learning and deep learning algorithms for plant segmentation, predictions rely on the specific features being present in the training set. The need for a multi-featured dataset and analytics for cosegmentation becomes critical to better understand and predict plants' responses to the environment. High-throughput phenotyping produces an abundance of data that can be leveraged to improve segmentation accuracy and plant phenotyping. This paper introduces four datasets consisting of two plant species, Buckwheat and Sunflower, each split into control and drought conditions. Each dataset has three modalities (Fluorescence, Infrared, and Visible) with 7 to 14 temporal images that are collected in a high-throughput facility at the University of Nebraska-Lincoln. The four datasets (which will be collected under the CosegPP data repository in this paper) are evaluated using three cosegmentation algorithms: Markov random fields-based, Clustering-based, and Deep learning-based cosegmentation, and one commonly used segmentation approach in plant phenotyping. The integration of CosegPP with advanced cosegmentation methods will be the latest benchmark in comparing segmentation accuracy and finding areas of improvement for cosegmentation methodology.
Why it matches plant phenotyping methods植物フェノタイピング用のマルチモーダル・時系列データセットを開発し、複数のコセグメンテーション手法をベンチマークする研究であり、画像からの植物抽出・表現型解析手法が中心です。
abstractThis paper introduces four datasets consisting of two plant species, Buckwheat and Sunflower, each split into control and drought conditions.
Reproduction assets foundThe paper's CosegPP plant image dataset (Buckwheat/Sunflower, multi-modal, with ground-truth masks) is publicly deposited on Zenodo per the Data Availability statement. The GitHub repos mentioned (MIG, Subdiscover, DeepCO3) are cited third-party prior-work code, not authors' paper-specific analysis code.Dataset · publicData Availability: All relevant data underlying this study are available at https://doi.org/10.5281/zenodo.5117176 .Open asset ↗zenodo · 10.5281/zenodo.5117176lines:138-150Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 14 Sept 2026
BACKGROUND: Maize cobs are an important component of crop yield that exhibit a high diversity in size, shape and color in native landraces and modern varieties. Various phenotyping approaches were developed to measure maize cob parameters in a high throughput fashion. More recently, deep learning methods like convolutional neural networks (CNNs) became available and were shown to be highly useful for high-throughput plant phenotyping. We aimed at comparing classical image segmentation with deep learning methods for maize cob image segmentation and phenotyping using a large image dataset of native maize landrace diversity from Peru. RESULTS: Comparison of three image analysis methods showed that a Mask R-CNN trained on a diverse set of maize cob images was highly superior to classical image analysis using the Felzenszwalb-Huttenlocher algorithm and a Window-based CNN due to its robustness to image quality and object segmentation accuracy ([Formula: see text]). We integrated Mask R-CNN into a high-throughput pipeline to segment both maize cobs and rulers in images and perform an automated quantitative analysis of eight phenotypic traits, including diameter, length, ellipticity, asymmetry, aspect ratio and average values of red, green and blue color channels for cob color. Statistical analysis identified key training parameters for efficient iterative model updating. We also show that a small number of 10-20 images is sufficient to update the initial Mask R-CNN model to process new types of cob images. To demonstrate an application of the pipeline we analyzed phenotypic variation in 19,867 maize cobs extracted from 3449 images of 2484 accessions from the maize genebank of Peru to identify phenotypically homogeneous and heterogeneous genebank accessions using multivariate clustering. CONCLUSIONS: Single Mask R-CNN model and associated analysis pipeline are widely applicable tools for maize cob phenotyping in contexts like genebank phenomics or plant breeding.
Why it matches plant phenotyping methodsトウモロコシ穂の画像セグメンテーションと8形質の自動定量を目的とする手法開発・比較検証および高スループット解析パイプラインの構築が中心である。
abstractWe aimed at comparing classical image segmentation with deep learning methods for maize cob image segmentation and phenotyping
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicDeep learning model and manuals with codes for custom detections and model updating: https://gitlab.com/kjschmidlab/deepcob .Open asset ↗gitlab · kjschmidlab/deepcoblines:182-229Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Early-stage plant density is an essential trait that determines the fate of a genotype under given environmental conditions and management practices. The use of RGB images taken from UAVs may replace the traditional visual counting in fields with improved throughput, accuracy, and access to plant localization. However, high-resolution images are required to detect the small plants present at the early stages. This study explores the impact of image ground sampling distance (GSD) on the performances of maize plant detection at three-to-five leaves stage using Faster-RCNN object detection algorithm. Data collected at high resolution (GSD ≈ 0.3 cm) over six contrasted sites were used for model training. Two additional sites with images acquired both at high and low (GSD ≈ 0.6 cm) resolutions were used to evaluate the model performances. Results show that Faster-RCNN achieved very good plant detection and counting (rRMSE = 0.08) performances when native high-resolution images are used both for training and validation. Similarly, good performances were observed (rRMSE = 0.11) when the model is trained over synthetic low-resolution images obtained by downsampling the native training high-resolution images and applied to the synthetic low-resolution validation images. Conversely, poor performances are obtained when the model is trained on a given spatial resolution and applied to another spatial resolution. Training on a mix of high- and low-resolution images allows to get very good performances on the native high-resolution (rRMSE = 0.06) and synthetic low-resolution (rRMSE = 0.10) images. However, very low performances are still observed over the native low-resolution images (rRMSE = 0.48), mainly due to the poor quality of the native low-resolution images. Finally, an advanced super resolution method based on GAN (generative adversarial network) that introduces additional textural information derived from the native high-resolution images was applied to the native low-resolution validation images. Results show some significant improvement (rRMSE = 0.22) compared to bicubic upsampling approach, while still far below the performances achieved over the native high-resolution images.
Why it matches plant phenotyping methodsUAV画像とFaster-RCNNを用いてトウモロコシの個体密度を検出・計数し、空間解像度や超解像手法の性能を比較・検証しており、植物表現型取得法が研究の中心です。
abstractThe use of RGB images taken from UAVs may replace the traditional visual counting in fields with improved throughput, accuracy, and access to plant localization.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe Cycle-ESRGAN network was implemented using Keras [ 56 ] deep learning library in Python. The codes will be made available on Github at the following link: https://github.com/kaaviyave/Cycle-ESRGAN .Open asset ↗kaaviyave/Cycle-ESRGANlines:231-249Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Plant functional traits ('traits') are essential for assessing biodiversity and ecosystem processes, but cumbersome to measure. To facilitate trait measurements, we test if traits can be predicted through visible morphological features by coupling heterogeneous photographs from citizen science (iNaturalist) with trait observations (TRY database) through Convolutional Neural Networks (CNN). Our results show that image features suffice to predict several traits representing the main axes of plant functioning. The accuracy is enhanced when using CNN ensembles and incorporating prior knowledge on trait plasticity and climate. Our results suggest that these models generalise across growth forms, taxa and biomes around the globe. We highlight the applicability of this approach by producing global trait maps that reflect known macroecological patterns. These findings demonstrate the potential of Big Data derived from professional and citizen science in concert with CNN as powerful tools for an efficient and automated assessment of Earth's plant functional diversity.
Why it matches plant phenotyping methods市民科学画像とCNNを用いて植物機能形質を自動推定する計算手法を開発・評価しており、形質取得が研究の中心である。
abstractwe test if traits can be predicted through visible morphological features by coupling heterogeneous photographs from citizen science (iNaturalist) with trait observations (TRY database) through Convolutional Neural Networks (CNN).
Reproduction assets foundThe paper's Data/Code availability statements provide public figshare deposits with the trained CNN ensemble models and global trait maps (10.6084/m9.figshare.13312040), raw data tables with image download links and mean trait values (10.6084/m9.figshare.14410379), the iNaturalist raw image dataset via GBIF (10.15468/3Dataset · publicthe raw data tables containing the download links for the plant images as well as the mean trait values that were the basis for further processing are available on figshare ( https://doi.org/10.6084/m9.figshare.14410379 )Open asset ↗figshare · 10.6084/m9.figshare.14410379lines:142-198Dataset · publicThe raw image dataset can be obtained from iNaturalist database via https://doi.org/10.15468/ab3s5x 47Open asset ↗10.15468/ab3s5xlines:142-198Code · publicThe code supporting this manuscript is available online at https://github.com/ChrSchiller/cnn_traitsOpen asset ↗GitHub · ChrSchiller/cnn_traitslines:142-198Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Nitrogen is an essential nutrient element required for optimum crop growth and yield. If a specific amount of nitrogen is not applied to crops, their yield is affected. Estimation of nitrogen level in crops is momentous to decide the nitrogen fertilization in crops. The amount of nitrogen in crops is measured through different techniques, including visual inspection of leaf color and texture and by laboratory analysis of plant leaves. Laboratory analysis-based techniques are more accurate than visual inspection, but they are costly, time-consuming, and require skilled laboratorian and precise equipment. Therefore, computer-based systems are required to estimate the amount of nitrogen in field crops. In this paper, a computer vision-based solution is introduced to solve this problem as well as to help farmers by providing an easier, cheaper, and faster approach for measuring nitrogen deficiency in crops. The system takes an image of the crop leaf as input and estimates the amount of nitrogen in it. The image is captured by placing the leaf on a specially designed slate that contains the reference green and yellow colors for that crop. The proposed algorithm automatically extracts the leaf from the image and computes its color similarity with the reference colors. In particular, we define a green color value (GCV) index from this analysis, which serves as a nitrogen indicator. We also present an evaluation of different color distance models to find a model able to accurately capture the color differences. The performance of the proposed system is evaluated on a Spinacia oleracea dataset. The results of the proposed system and laboratory analysis are highly correlated, which shows the effectiveness of the proposed system.
Why it matches plant phenotyping methods葉画像から窒素状態を推定するコンピュータビジョン手法の開発・評価が中心であり、植物生理状態の表現型取得法に該当する。
abstractIn this paper, a computer vision-based solution is introduced to solve this problem as well as to help farmers by providing an easier, cheaper, and faster approach for measuring nitrogen deficiency in crops.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicA software release of the proposed
vision-based framework for N-nutrient estimation in crops is made publicly available on
the project website: http://faculty.pucit.edu.pk/~farid/Research/GCV.html, accessed on
8 June 2021.Open asset ↗pdf-page:16 lines:1-55Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
ArabidopsisMaizeLiDAR / point cloudRGB / grayscaleLeafWhole plant / canopy / plot / fieldClassificationMorphology / geometry measurementSegmentationGrowth / development / phenology
Brassinosteroids (BRs) are a group of plant steroid hormones involved in regulating growth, development, and stress responses. Many components of the BR pathway have previously been identified and characterized. However, BR phenotyping experiments are typically performed in a low-throughput manner, such as on Petri plates. Additionally, the BR pathway affects drought responses, but drought experiments are time consuming and difficult to control. To mitigate these issues and increase throughput, we developed the Robotic Assay for Drought (RoAD) system to perform BR and drought response experiments in soil-grown Arabidopsis plants. RoAD is equipped with a robotic arm, a rover, a bench scale, a precisely controlled watering system, an RGB camera, and a laser profilometer. It performs daily weighing, watering, and imaging tasks and is capable of administering BR response assays by watering plants with Propiconazole (PCZ), a BR biosynthesis inhibitor. We developed image processing algorithms for both plant segmentation and phenotypic trait extraction to accurately measure traits including plant area, plant volume, leaf length, and leaf width. We then applied machine learning algorithms that utilize the extracted phenotypic parameters to identify image-derived traits that can distinguish control, drought-treated, and PCZ-treated plants. We carried out PCZ and drought experiments on a set of BR mutants and Arabidopsis accessions with altered BR responses. Finally, we extended the RoAD assays to perform BR response assays using PCZ in Zea mays (maize) plants. This study establishes an automated and non-invasive robotic imaging system as a tool to accurately measure morphological and growth-related traits of Arabidopsis and maize plants in 3D, providing insights into the BR-mediated control of plant growth and stress responses.
Why it matches plant phenotyping methodsRoADはロボット、RGBカメラ、レーザープロフィロメータ、画像処理による植物形質抽出を中核とする自動フェノタイピングシステムであり、方法開発と実証が主目的です。
abstractwe developed the Robotic Assay for Drought (RoAD) system
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the authors' Arabidopsis image-processing source code (the pipeline that produced the paper's phenotypic trait measurements) on GitHub, making it a paper-specific, publicly actionable analysis code asset. No public phenotype dataset or image deposit is stated;Code · publicMN, ME, YY, YB, LT, SHH, and JWW. Funding
acquisition, YY, LT, JWW, and SHH.
CONFLICTS OF INTEREST
The authors declare no conflict of interest.
DATA AVAILABILITY STATEMENT
All relevant data can be found within the manuscript and
its supporting materials. The source code for Arabidopsis
image processing is available on GitHub at https://github.com/lr-xiang/RoAD-image-processing.SUPPORTING INFORMATION
Additional Supporting Information may be found in the online ver-
sion of this article.
Figure S1. PCZ and BRZ responses of Arabidopsis accessions.
Figure S2. Drought responses in Arabidopsis using RoAD end-
point drought mode.
Figure S3. Validation results for maize plants.
Figure S4. ComparisonOpen asset ↗lr-xiang/RoAD-image-processingpdf-raw-page:15 lines:80-150Code / dataset availability confirmedarXiv · checked 15 Sept 2026
Field / plotRGB / grayscaleMultispectral / hyperspectralThermalWhole plant / canopy / plot / field
A core objective of the TERRA-REF project was to generate an open-access reference dataset for the evaluation of sensing technologies to study plants under field conditions. The TERRA-REF program deployed a suite of high-resolution, cutting edge technology sensors on a gantry system with the aim of scanning 1 hectare (10$^4$) at around 1 mm$^2$ spatial resolution multiple times per week. The system contains co-located sensors including a stereo-pair RGB camera, a thermal imager, a laser scanner to capture 3D structure, and two hyperspectral cameras covering wavelengths of 300-2500nm. This sensor data is provided alongside over sixty types of traditional plant phenotype measurements that can be used to train new machine learning models. Associated weather and environmental measurements, information about agronomic management and experimental design, and the genomic sequences of hundreds of plant varieties have been collected and are available alongside the sensor and plant phenotype data. Over the course of four years and ten growing seasons, the TERRA-REF system generated over 1 PB of sensor data and almost 45 million files. The subset that has been released to the public domain accounts for two seasons and about half of the total data volume. This provides an unprecedented opportunity for investigations far beyond the core biological scope of the project. The focus of this paper is to provide the Computer Vision and Machine Learning communities an overview of the available data and some potential applications of this one of a kind data.
Why it matches plant phenotyping methods植物の高解像度マルチセンサーデータと植物表現型データを含む公開ベンチマーク／データセットを紹介し、コンピュータビジョンでの利用を主目的とするため、フェノタイピング手法・基盤として中心的です。
abstractgenerate an open-access reference dataset for the evaluation of sensing technologies to study plants under field conditions
Reproduction assets foundThe paper describes the TERRA-REF public domain release of plant phenotyping sensor data (RGB, thermal, laser scanner, hyperspectral, PSII) plus derived phenotypes, and explicitly points to public code repositories for the processing pipeline (terraref GitHub, PhytoOracle, AgPipeline) and a data access portal. All are,Dataset · publicprocessing, reviewing, curating, describing, and hosting the data.
Instead, we focused on an initial public release and plan to make new datasets available based on need.
Access to unpublished data can be requested from the authors, and as data are curated they will be added to subsequent versions of the public domain release ( https://terraref.org/data/access-data ).
In addition to hosting an archival copy of data on Dryad [ 16 ] , the
documentation includes instructions for browsing and accessing these
data through a variety of online portals. These portals provide access
to web user interfaces as well as databases, APIs, and R and Python
clients. In some cases it will be easier to acceOpen asset ↗lines:234-317Code · publicapproach described by Li et al . [ 18 ] .
Herritt et al . [ 14 , 13 ] demonstrate and provide software used in analysis of a sequence of images that capture plant fluorescence response to a pulse of light.
Most of the algorithms used to generate data products have not been published as papers but are made available on GitHub ( https://github.com/terraref ); code
used to release the data publication in 2020 is available on Zenodo [ 25 , 15 , 10 , 6 , 4 , 19 , 8 , 7 , 5 , 9 , 17 ] .
Pipeline development continues to support ongoing use of the field scanner as well as more general applications in plant sensing pipelines.
Recent advances have improved pipeline scalability and modulOpen asset ↗terrareflines:193-233Code · publiclant sensing pipelines.
Recent advances have improved pipeline scalability and modularity by adopting workflow tools and making use of heterogeneous computing environments.
The TERRA-REF computing pipeline has been adapted and extended for continuing use with the Field Scanner with the new name ”PhytoOracle” and is available at https://github.com/LyonsLab/PhytoOracle . Related work generalizing the pipeline for other phenomics applications has been released under the name ”AgPipeline” https://github.com/agpipeline with applications to aerial imaging described by Schnaufer et al . [ 22 ] .
All of these software are made available with permissive open source licenses on GitHub to enable accesOpen asset ↗PhytoOraclelines:193-233Code · publicnvironments.
The TERRA-REF computing pipeline has been adapted and extended for continuing use with the Field Scanner with the new name ”PhytoOracle” and is available at https://github.com/LyonsLab/PhytoOracle . Related work generalizing the pipeline for other phenomics applications has been released under the name ”AgPipeline” https://github.com/agpipeline with applications to aerial imaging described by Schnaufer et al . [ 22 ] .
All of these software are made available with permissive open source licenses on GitHub to enable access and community development.
Figure 4: Summary of public sensor datasets from Seasons 4 and 6. Each dot represents the dates for which a particular daOpen asset ↗agpipelinelines:193-233Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Abstract Background Drought is a major consequence of global heating that has negative impacts on agriculture. Potato is a drought-sensitive crop; tuber growth and dry matter content may both be impacted. Moreover, water deficit can induce physiological disorders such as glassy tubers and internal rust spots. The response of potato plants to drought is complex and can be affected by cultivar type, climatic and soil conditions, and the point at which water stress occurs during growth. The characterization of adaptive responses in plants presents a major phenotyping challenge. There is therefore a demand for the development of non-invasive analytical techniques to improve phenotyping. Results This project aimed to take advantage of innovative approaches in MRI, phenotyping and molecular biology to evaluate the effects of water stress on potato plants during growth. Plants were cultivated in pots under different water conditions. A control group of plants were cultivated under optimal water uptake conditions. Other groups were cultivated under mild and severe water deficiency conditions (40 and 20% of field capacity, respectively) applied at different tuber growth phases (initiation, filling). Water stress was evaluated by monitoring soil water potential. Two fully-equipped imaging cabinets were set up to characterize plant morphology using high definition color cameras (top and side views) and to measure plant stress using RGB cameras. The response of potato plants to water stress depended on the intensity and duration of the stress. Three-dimensional morphological images of the underground organs of potato plants in pots were recorded using a 1.5 T MRI scanner. A significant difference in growth kinetics was observed at the early growth stages between the control and stressed plants. Quantitative PCR analysis was carried out at molecular level on the expression patterns of selected drought-responsive genes. Variations in stress levels were seen to modulate ABA and drought-responsive ABA-dependent and ABA-independent genes. Conclusions This methodology, when applied to the phenotyping of potato under water deficit conditions, provides a quantitative analysis of leaves and tubers properties at microstructural and molecular levels. The approaches thus developed could therefore be effective in the multi-scale characterization of plant response to water stress, from organ development to gene expression.
Why it matches plant phenotyping methodsジャガイモの水ストレス表現型を取得するための非侵襲的イメージング・生理計測手法と装置構成が研究の中心であり、単なる生物学的測定ではない。
abstractThere is therefore a demand for the development of non-invasive analytical techniques to improve phenotyping.
Reproduction assets foundThe paper's MRI phenotyping data (3D images of potato tubers in pots under water deficit) are openly deposited in Data INRAE with an explicit DOI, as stated in the Availability of data and materials section. No author analysis code or trained models are reported.Dataset · publicThe MRI data presented in this study are openly available in Data INRAE ( https://data.inrae.fr/ ) repository at: https://data.inrae.fr/dataset.xhtml?persistentId=doi:10.15454/SFAXAA ).Open asset ↗Data INRAE · doi:10.15454/SFAXAAlines:160-172Code / dataset availability confirmedCrossref · Europe PMC · checked 9 Sept 2026
Abstract Background Drought threatens the food supply of the world population. Dissecting the dynamic responses of plants to drought will be beneficial for breeding drought-tolerant crops, as the genetic controls of these responses remain largely unknown. Results Here we develop a high-throughput multiple optical phenotyping system to noninvasively phenotype 368 maize genotypes with or without drought stress over a course of 98 days, and collected multiple optical images, including color camera scanning, hyperspectral imaging, and X-ray computed tomography images. We develop high-throughput analysis pipelines to extract image-based traits (i-traits). Of these i-traits, 10,080 were effective and heritable indicators of maize external and internal drought responses. An i-trait-based genome-wide association study reveals 4322 significant locus-trait associations, representing 1529 quantitative trait loci (QTLs) and 2318 candidate genes, many that co-localize with previously reported maize drought responsive QTLs. Expression QTL (eQTL) analysis uncovers many local and distant regulatory variants that control the expression of the candidate genes. We use genetic mutation analysis to validate two new genes, ZmcPGM2 and ZmFAB1A , which regulate i-traits and drought tolerance. Moreover, the value of the candidate genes as drought-tolerant genetic markers is revealed by genome selection analysis, and 15 i-traits are identified as potential markers for maize drought tolerance breeding. Conclusion Our study demonstrates that combining high-throughput multiple optical phenotyping and GWAS is a novel and effective approach to dissect the genetic architecture of complex traits and clone drought-tolerance associated genes.
Why it matches plant phenotyping methods高スループット光学フェノタイピングシステムの開発と、画像から植物の外部・内部形質を抽出する解析パイプラインが研究の中心であるため含める。
abstractHere we develop a high-throughput multiple optical phenotyping system to noninvasively phenotype 368 maize genotypes with or without drought stress over a course of 98 days
Reproduction assets foundThe paper publicly deposits its maize RGB/HSI/CT images, i-trait phenotypic data, and genotype data on Figshare, and the authors' CT/HSI/RGB image-analysis pipeline code on GitHub and Zenodo, plus figures/supplemental files on Figshare.Code · publicThe code of CT, HSI, and RGB image analysis pipelines could be downloaded via the link: https://github.com/fenghuifh2006/Maize-RGB-CT-HSI-programOpen asset ↗github · fenghuifh2006/Maize-RGB-CT-HSI-programlines:185-218Code · publicThe code of CT, HSI, and RGB image analysis pipelines could be downloaded via the link: https://github.com/fenghuifh2006/Maize-RGB-CT-HSI-program and https://doi.org/10.5281/zenodo.4690730Open asset ↗zenodo · 10.5281/zenodo.4690730lines:185-218Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Phenotyping wheat (Triticum aestivum L.) is time-consuming and new methods are necessary to decrease labor. To develop a heterotic pool of male wheat lines for hybrid breeding, there must be an efficient way to measure both anther extrusion and the size of anthers. Five hundred and ninety-four soft red winter wheat lines in two replications of randomized complete block design were phenotyped for anther extrusion, a key trait for hybrid wheat production. A device was constructed to capture images using a mobile device. Four heads were sampled per line when anthesis was evident for half the heads in the plot. The extruded anthers were scraped onto a surface, their image was captured, and the area of the anthers was taken via ImageJ. The number of anthers extruded was estimated by counting the number of anthers per image and dividing by the number of heads sampled. The area per anther was taken by dividing the area of anthers per spike by the number of anthers per spike. A significant correlation (R=0.9, p
Why it matches plant phenotyping methods小麦の葯突出数と葯サイズを画像取得・ImageJ解析で測定する手法を開発し、大規模材料で適用・評価しており、表現型取得法が中心である。
abstractTo develop a heterotic pool of male wheat lines for hybrid breeding, there must be an efficient way to measure both anther extrusion and the size of anthers.
Reproduction assets foundThe paper's Data Availability Statement points to a public GitHub repository containing the paper's anther extrusion phenotyping data (HD, AD, AOAPS, NOAPS, APA for the HGAWN population), alongside request-based access via the corresponding author. The ImageJ macro and R analysis code are described but no separate codeDataset · publicof 7
Funding: This research was funded by USDA National Institute of Food and Agriculture, grant
number 2017-67007-25939.
Institutional Review Board Statement: Not applicable.
Informed Consent Statement: Not applicable.
Data Availability Statement: Data is available upon request via contact with the corresponding
author and at <https://github.com/zjwinn/Phenotyping-Anther-Extrusion-of-Wheat-Using-Image-Analysis>.
Acknowledgments: This work is supported by the Agriculture and Food Research Initiative Competi-
tive Grant 2017-67007-25939 (Wheat-CAP) from the USDA National Institute of Food and Agriculture.
Conflicts of Interest: The author claims no conflict of interest.
Abbreviations
NOAPS NuOpen asset ↗https://github.com/zjwinn/Phenotyping-Anther-Extrusion-of-Wheat-Using-Image-Analysispdf-raw-page:7 lines:1-53Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Wheat blast is a threat to global wheat production, and limited blast-resistant cultivars are available. The current estimations of wheat spike blast severity rely on human assessments, but this technique could have limitations. Reliable visual disease estimations paired with Red Green Blue (RGB) images of wheat spike blast can be used to train deep convolutional neural networks (CNN) for disease severity (DS) classification. Inter-rater agreement analysis was used to measure the reliability of who collected and classified data obtained under controlled conditions. We then trained CNN models to classify wheat spike blast severity. Inter-rater agreement analysis showed high accuracy and low bias before model training. Results showed that the CNN models trained provide a promising approach to classify images in the three wheat blast severity categories. However, the models trained on non-matured and matured spikes images showing the highest precision, recall, and F1 score when classifying the images. The high classification accuracy could serve as a basis to facilitate wheat spike blast phenotyping in the future.
Why it matches plant phenotyping methodsRGB画像とCNNによるコムギ穂の病害重症度推定が研究の中心であり、植物病害状態を直接定量化するフェノタイピング手法を開発・評価している。
abstractWe then trained CNN models to classify wheat spike blast severity.
Reproduction assets foundThe paper publicly deposits its wheat spike blast image datasets (Dataset 1 and Dataset 2) and the corresponding trained CNN models on the Purdue University Research Repository (PURR), with explicit availability statements and URLs.Dataset · publicDataset 1, included maturing and non-matured wheat spikes; and Dataset 2 included only non-matured spikes (data available at: https://purr.purdue.edu/publications/3772/1 ).Open asset ↗lines:341-377Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 15 Sept 2026
CarrotRGB / grayscaleRootMorphology / geometry measurementRoot system architecture
), which ranges from long and tapered to short and blunt, has been used for at least several centuries to classify carrot cultivars. The subjectivity involved in determining market class hinders the establishment of metric-based standards and is ill-suited to dissecting the genetic basis of such quantitative phenotypes. Advances in digital image acquisition and analysis has enabled new methods for quantifying sizes of plant structures and shapes, but in order to dissect the genetic control of the shape features that define market class in carrot, a tool is required that quantifies the specific shape features used by humans in distinguishing between classes. This study reports the construction and demonstration of the first such platform, which facilitates rapid phenotyping of traits that are measurable by hand, such as length and width, as well as principal component analysis (PCA) of the root contour and its curvature. This latter approach is of particular interest, as it enabled the detection of a novel and significant quantitative trait, defined here as root fill, which accounts for 85% of the variation in root shape. Curvature analysis was demonstrated to be an effective method for precise measurement of the broadness of the carrot shoulder, and degree of tip fill; the first principal component of the respective curvature profiles captured 87% and 84% of the total variance. This platform's performance was validated in two experimental panels. First, a diverse, global collection of germplasm was used to assess its capacity to identify market classes through clustering analysis. Second, a diallel mating design between inbred breeding lines of differing market classes was used to estimate the heritability of the key phenotypes that define market class, which revealed significant variation in the narrow-sense heritability of size and shape traits, ranging from 0.14 for total root size, to 0.84 for aspect ratio. These results demonstrate the value of high-throughput digital phenotyping in characterizing the genetic control of complex quantitative phenotypes.
Why it matches plant phenotyping methodsニンジン根形状の画像取得・輪郭解析・曲率解析を行うデジタル表現型解析プラットフォームを開発し、複数パネルで性能検証しており、表現型取得手法が研究の中心である。
abstractThis study reports the construction and demonstration of the first such platform, which facilitates rapid phenotyping of traits that are measurable by hand, such as length and width, as well as principal component analysis (PCA) of the root contour and its curvature.
Reproduction assets foundThe paper explicitly provides two public author repositories containing the phenotyping analysis code: a Python image-acquisition/mask-generation platform and MATLAB algorithms for mask straightening and contour/curvature PCA. No standalone phenotype dataset deposit is stated; the supplementary material link is genericCode · publicAs such, this metric ranges from 0 (in the case of all variance being attributed to SCA) to 1 (in the case of all variance being attributed to GCA) ( Baker, 1978 ).
Software Availability
Python code for the image acquisition platform and scripts for producing binary masks are available at: https://github.com/shbrainard/carrot-phenotyping . MATLAB algorithms for straightening binary masks and performing PCA on contours or curvature values are available at: https://github.com/jbustamante35/carrotsweeper .
Results
Accuracy of Image-Derived Phenotypes
Prior to a rigorous evaluation of any experimental populations, it is critical to confirm that a newly developed phOpen asset ↗https://github.com/shbrainard/carrot-phenotypinglines:75-85Code · publicttributed to GCA) ( Baker, 1978 ).
Software Availability
Python code for the image acquisition platform and scripts for producing binary masks are available at: https://github.com/shbrainard/carrot-phenotyping . MATLAB algorithms for straightening binary masks and performing PCA on contours or curvature values are available at: https://github.com/jbustamante35/carrotsweeper .
Results
Accuracy of Image-Derived Phenotypes
Prior to a rigorous evaluation of any experimental populations, it is critical to confirm that a newly developed phenotyping platform produces accurate and reliable phenotypes. Scatter plots of the root phenotypes obtained from digital images vs. hand measurements confirms thOpen asset ↗https://github.com/jbustamante35/carrotsweeperlines:75-85Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This article introduces Arabica coffee leaf datasets known as JMuBEN and JMuBEN2. Image acquisition was done in Mutira coffee plantation in Kirinyaga county-Kenya under real-world conditions using a digital camera and with the help of a pathologist. JMuBEN dataset contains three compressed folders with images inside. The first file contains 7682 images of Cerscospora, the second contains 8337 images of rust and the last one contains 6572 images of Phoma. JMuBEN2 contains two compressed files where the first file contains 16,979 images of Miner while the other contains 18,985 images of healthy leaves. In total, the dataset contains 58,555 leaf images spread across five classes (Phoma, Cescospora, Rust, Healthy, Miner,) with annotations regarding the state of the leaves and the disease names. The Arabica datasets contain images that facilitates training and validation during the utilization of deep learning algorithms for coffee plant leaf disease recognition and classification. The dataset is publicly and freely available at https://data.mendeley.com/datasets/tgv3zb82nd/1 and https://data.mendeley.com/datasets/t2r6rszp5c/1 respectively.
Why it matches plant phenotyping methodsコーヒー葉の病害・健全状態を画像と注釈で体系化した公開データセットであり、植物表現型（病害状態）の取得・分類基盤が研究の中心である。
abstractThis article introduces Arabica coffee leaf datasets known as JMuBEN and JMuBEN2.
Reproduction assets foundThe paper is a data descriptor for the JMuBEN and JMuBEN2 Arabica coffee leaf image datasets, which are the paper's own phenotyping assets (58,555 annotated leaf images across five classes) and are publicly available on Mendeley Data.Dataset · publicHealthy, Miner,) with annotations regarding the state of the leaves and the disease names. The Arabica datasets contain images that facilitates training and validation during the utilization of deep learning algorithms for coffee plant leaf disease recognition and classification. The dataset is publicly and freely available at https://data.mendeley.com/datasets/tgv3zb82nd/1 and https://data.mendeley.com/datasets/t2r6rszp5c/1 respectively.
Keywords
Arabica coffee Image datasets Machine learning Deep learning Disease diagnosis pmc-status-qastatus 0 pmc-status-live yes pmc-status-embargo no pmc-status-released yes pmc-prop-open-access yes pmc-prop-olf no pmc-prop-manuscript no pmc-prop-legally-Open asset ↗lines:1-54Dataset · publicte of the leaves and the disease names. The Arabica datasets contain images that facilitates training and validation during the utilization of deep learning algorithms for coffee plant leaf disease recognition and classification. The dataset is publicly and freely available at https://data.mendeley.com/datasets/tgv3zb82nd/1 and https://data.mendeley.com/datasets/t2r6rszp5c/1 respectively.
Keywords
Arabica coffee Image datasets Machine learning Deep learning Disease diagnosis pmc-status-qastatus 0 pmc-status-live yes pmc-status-embargo no pmc-status-released yes pmc-prop-open-access yes pmc-prop-olf no pmc-prop-manuscript no pmc-prop-legally-suppressed no pmc-prop-has-pdf yes pmc-prop-has-supOpen asset ↗lines:1-54Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Abstract Fractional vegetation cover (FVC) is the key trait of interest for characterizing crop growth status in crop breeding and precision management. Accurate quantification of FVC among different breeding lines, cultivars, and growth environments is challenging, especially because of the large spatiotemporal variability in complex field conditions. This study presents an ensemble modeling strategy for phenotyping crop FVC from unmanned aerial vehicle (UAV)-based multispectral images by coupling the PROSAIL model with a gap probability model (PROSAIL-GP). Seven field experiments for four main crops were conducted, and canopy images were acquired using a UAV platform equipped with RGB and multispectral cameras. The PROSAIL-GP model successfully retrieved FVC in oilseed rape (Brassica napus L.) with coefficient of determination, root mean square error (RMSE), and relative RMSE (rRMSE) of 0.79, 0.09, and 18%, respectively. The robustness of the proposed method was further examined in rice (Oryza sativa L.), wheat (Triticum aestivum L.), and cotton (Gossypium hirsutum L.), and a high accuracy of FVC retrieval was obtained, with rRMSEs of 12%, 6%, and 6%, respectively. Our findings suggest that the proposed method can efficiently retrieve crop FVC from UAV images at a high spatiotemporal domain, which should be a promising tool for precision crop breeding.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像から作物のFVCという形態・生育形質を推定するモデルを開発し、複数作物・圃場実験で精度と頑健性を検証しており、表現型取得手法が研究の中心である。
abstractThis study presents an ensemble modeling strategy for phenotyping crop FVC from unmanned aerial vehicle (UAV)-based multispectral images by coupling the PROSAIL model with a gap probability model (PROSAIL-GP).
Reproduction assets foundThe paper's Data availability statement explicitly deposits the authors' PROSAIL-GP model code and all datasets (UAV-derived canopy reflectance/FVC measurements) in a public GitHub repository, plus detailed protocols on protocols.io. The PROSAIL model itself is a generic prior tool and is excluded.Code · publicle.
Conflict of interest
The authors declare no conflict of interest.
Data availability
Data supporting this work,such as details and source code of the PROSAIL
model used in this study,are openly available at http://teledetection.ipgp.jussieu.fr/prosail/.The code of the PROSAIL-GP model and all of the
datasets are available at https://github.com/WanLiangZJU/Crop-FVC-retrieval. The detailed protocols can be found at protocols.io (https://
dx.doi.org/10.17504/protocols.io.btmynk7w).
References
Aballa A, Cen H, Wan L, Mehmood K, He Y. 2020. Nutrient status diag-
nosis of infield oilseed rape via deep learning-enabled dynamic model. IEEE
Transactions on Industrial Informatics 17, 4379–4389.
BacOpen asset ↗WanLiangZJU/Crop-FVC-retrievalpdf-raw-page:15 lines:1-89Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 15 Sept 2026
BACKGROUND: Maize (Zea mays L.) is one of the most important food sources in the world and has been one of the main targets of plant genetics and phenotypic research for centuries. Observation and analysis of various morphological phenotypic traits during maize growth are essential for genetic and breeding study. The generally huge number of samples produce an enormous amount of high-resolution image data. While high throughput plant phenotyping platforms are increasingly used in maize breeding trials, there is a reasonable need for software tools that can automatically identify visual phenotypic features of maize plants and implement batch processing on image datasets. RESULTS: On the boundary between computer vision and plant science, we utilize advanced deep learning methods based on convolutional neural networks to empower the workflow of maize phenotyping analysis. This paper presents Maize-IAS (Maize Image Analysis Software), an integrated application supporting one-click analysis of maize phenotype, embedding multiple functions: (I) Projection, (II) Color Analysis, (III) Internode length, (IV) Height, (V) Stem Diameter and (VI) Leaves Counting. Taking the RGB image of maize as input, the software provides a user-friendly graphical interaction interface and rapid calculation of multiple important phenotypic characteristics, including leaf sheath points detection and leaves segmentation. In function Leaves Counting, the mean and standard deviation of difference between prediction and ground truth are 1.60 and 1.625. CONCLUSION: The Maize-IAS is easy-to-use and demands neither professional knowledge of computer vision nor deep learning. All functions for batch processing are incorporated, enabling automated and labor-reduced tasks of recording, measurement and quantitative analysis of maize growth traits on a large dataset. We prove the efficiency and potential capability of our techniques and software to image-based plant research, which also demonstrates the feasibility and capability of AI technology implemented in agriculture and plant science.
Why it matches plant phenotyping methodsトウモロコシ画像から複数の形態形質を自動抽出するソフトウェアを開発・評価しており、植物フェノタイピング手法が研究の中心である。
abstractThis paper presents Maize-IAS (Maize Image Analysis Software), an integrated application supporting one-click analysis of maize phenotype
Reproduction assets foundThe authors' Maize-IAS analysis software (the paper's phenotyping analysis code) is publicly available on GitHub. The maize image datasets are explicitly not public and require request.Code · publicl development prospects of visual phenotype detection using deep learning methods. The methods and workflow provided in this article can also be easily applied to other crops.
Availability and requirements
Project name: A Maize Image Analysis Software using Deep Learning for High-throughput Plant Phenotyping.
Project home page: https://github.com/surefyyq/Maize-IAS
Operating system: Ubuntu18.04.
Programming language: Python3.
Other requirements: Pytorch 1.1.0 or higher, Torchvision 0.3.0 or higher.
Any restrictions to use by non-academic: None.
Supplementary information
Additional file 1. Installation and debug guidelines.
Publisher’s Note
Springer Nature remains neutral with regard to juOpen asset ↗surefyyq/Maize-IASlines:403-475