Plant phenotyping methods.

ERT-based root water uptake quantification in field-grown wheat under terminal drought →

Abstract Background and Aims Drought reduces wheat yields, yet field-scale quantification of root water uptake (RWU) remains challenging because below-ground processes are difficult to monitor. This study developed a non-invasive hydrogeophysical framework integrating Electrical Resistivity Tomography (ERT), TDR-based soil monitoring, and depth-aware Random Forest calibration to quantify depth-resolved RWU and evaluate genotype-specific water-use strategies under terminal drought. Methods Time-lapse ERT (44 surveys, ≥ 3 week⁻ 1 ) was combined with TDR sensor measurements of soil water content (n = 278 paired ρ–θ observations) to convert resistivity measurements into depth-resolved RWU estimates across 0.1–1.0 m depth. Five petrophysical models were evaluated using date-grouped fivefold cross-validation, with the depth-aware Random Forest performing best. Three wheat genotypes with contrasting root architectures were monitored under terminal drought (142 mm available water). ERT-derived RWU were analysed alongside stomatal conductance, chlorophyll fluorescence, and grain yield. Results ERT resolved RWU strategies among genotypes. WM-203 exhibited aggressive, coordinated multi-layer water extraction across the soil profile (r = 0.80–0.98), whereas WM-140 showed a delayed uptake strategy characterized by early deep-layer dominance followed by mid- and deep-profile engagement, and IPLR-760 displayed inconsistent uptake with mid-profile hydraulic decoupling. Genotypic RWU rankings were consistent with stomatal conductance and grain yield, spanning from 7.0 t ha⁻ 1 in WM-203 to 1.5 t ha⁻ 1 in IPLR-760 despite comparable total water extraction. Conclusion ERT-based quantification of RWU provides a robust, non-invasive approach for resolving genotype-specific water-use strategies under field conditions. The framework enables characterization of water-use coordination patterns and offers a tool for phenotyping drought-resilient wheat genotypes.

Why it matches plant phenotyping methodsERT・TDR・Random Forestを統合し、圃場コムギの根系水吸収を定量化する方法を開発・検証し、乾燥耐性遺伝子型の表現型評価に用いているため、フェノタイピング手法が中心である。

abstractThis study developed a non-invasive hydrogeophysical framework integrating Electrical Resistivity Tomography (ERT), TDR-based soil monitoring, and depth-aware Random Forest calibration to quantify depth-resolved RWU and evaluate genotype-specific water-use strategies under terminal drought.

A methodological framework for the standardised evaluation of olive genetic resources: GEN4OLIVE harmonized protocols →

Background Olive ( Olea europaea L.) breeding initiatives rely heavily on the extensive and correct characterisation of genetic resources to successfully achieve their goals, such as addressing climate change and emerging diseases challenges. However, the historical lack of standardised phenotyping protocols across multi-environment trials has severely hindered data interoperability and large-scale comparative analyses. Methods Within the Horizon 2020 GEN4OLIVE project, five international olive germplasm banks established a consensus-based methodological framework to systematically evaluate over 500 olive cultivars. We harmonised 14 evaluation protocols covering six fundamental dimensions: phenological and agronomic traits, abiotic stress resilience, biotic stress resilience, olive oil yield and chemical quality, table olive quality assessment, and morphological characterisation and photography. While most protocols were adapted from previously published literature to ensure ease of implementation across different facilities, novel methodologies for frost tolerance and standardised photography were developed de novo. Results The implementation of these consensus methods across five countries proved highly successful. This methodological framework enabled the generation of the largest harmonised, publicly available dataset on olive genetic resources to date, effectively making possible the correct comparation and ranking of the olive cultivars based on their specific characteristics. Conclusions This compendium of methods provides a robust, highly replicable reference point for the standardisation of olive germplasm characterisation and use of shared benchmark cultivars as an effective way for data normalization and comparation. It facilitates future global pre-breeding efforts, ensures international data interoperability, and supports the discovery of resilient cultivars to secure the future of the olive sector.

Why it matches plant phenotyping methodsオリーブ遺伝資源の標準化フェノタイピングプロトコルを体系化し、複数機関で実装・検証して大規模データセットを生成した方法論中心の研究である。

abstractthe historical lack of standardised phenotyping protocols across multi-environment trials has severely hindered data interoperability and large-scale comparative analyses.

Cognitive UAV-driven agro-surveillance framework for predicting crop stress–induced yield loss using spatio-temporal learning and adaptive irrigation control →

Precision agriculture is becoming more and more of a challenge that requires the use of intelligent systems that are able to predict stress and prevent yield loss before it is too late. Traditional methods of agricultural surveillance are predominantly reactive with irrigation demands being based on thresholds or individual yield forecasts models that do not represent the intricate spatio-temporal interactions that exist between crop physiology, soil status, and environmental stresses. Besides, the majority of the current practices do not have an autonomous decision-making approach to preventive intervention which leads to inefficient use of water and slows down the response to stress. This paper suggests a cognitive UAV-assisted agro-surveillance system to predict yield vulnerability caused by crop stress and optimize adaptive irrigation with the help of spatio-temporal deep and reinforcement learning. The framework combines UAV-obtained RGB and multispectral and thermal imagery with measurements of soil sensors and meteorological data obtained with the Crop Health and Environmental Stress Dataset. A new GeoSpatio-TRiNet model is used to acquire long-range spatial relationship, time stress development, and diffusion of stresses across agricultural regions. The model predicts the vulnerability trajectories of the stress instead of the direct yield regression, and this allows early detection of yield risk. Such predictions serve to generate a cognitive environmental state of a Soft ActorCritic (SAC) reinforcement learning agent that autonomously computes zone-based irrigation behaviors to reduce the recurrence of stress at the minimum water usage cost. As shown by the results of the experiment, the proposed framework has a stress forecasting accuracy of 96.3% and performs much better than the traditional machine learning, CNN-based, and transformer-based baselines. The system also decreases the predicted yield vulnerability by 46.6 and enhances water-use efficiency by 41.1 as compared to irrigation strategies based on rules. The results confirm the usefulness of spatio-temporal intelligence with predictive control in terms of effectiveness, and the proposed framework is a scalable and sustainable solution to precision agriculture of the next generation.

Why it matches plant phenotyping methodsUAV画像とセンサーデータから作物ストレスの時系列状態および収量脆弱性を推定する計算・センシング手法が研究の中心であり、灌漑制御への応用も技術評価の一部として記述されている。

abstractThe framework combines UAV-obtained RGB and multispectral and thermal imagery with measurements of soil sensors and meteorological data

Active sensing to characterize the heterogeneity of plant stress →

While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially resolved physiological measurements that go beyond passive imaging. By tightly coupling perception, geometric reasoning, and manipulation, the proposed system provides a robotics-driven approach to high-resolution plant phenotyping and opens new directions for autonomous agricultural inspection and plant-aware manipulation.

Why it matches plant phenotyping methods植物葉の蛍光を自律ロボットで空間的・反復的に取得するプラットフォームを開発しており、植物表現型の取得手法が研究の中心です。

abstractWe present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves.

High-throughput pollen germination phenotyping for assessing heat tolerance in soybean →

Abstract Heat stress causes ultrastructural damage in pollen grains, leading to reduced pollen germination, pollen size and shortened pollen tube length, ultimately lowering seed set and yield. This study presents a high-throughput phenotyping framework that integrates controlled-environment pollen germination assays with deep learning–based object detection for rapid, accurate, and scalable evaluation of reproductive heat tolerance in soybean breeding programs. Sixteen soybean genotypes were grown under controlled environments at optimal (28/18°C; day/night) and high temperature (38/28°C; day/night) regimes during flowering. In vitro pollen germination was quantified using six YOLO (You Only Look Once) object-detection architectures (YOLOv7–YOLOv12) to identify the best-performing model for automated analysis. Among the tested object-detection architectures, YOLOv9 achieved the best overall performance for detecting germinated and non-germinated pollen grains in complex images. High temperature significantly reduced mean pollen germination from an average of 40% under optimal conditions to an average of 21% under heat stress (P < 0.05), with a significant genotype × growth temperature interaction. Invitro incubation temperatures ranging from 10 °C to 45 °C produced a clear thermal response; however, no significant genotype × incubation temperature interaction was detected within either growth temperature regime. Although photosynthetic and physiological traits were measured exploring their relationship with pollen germination, their transient and complex response limited their reliability for predicting reproductive performance. The automated pipeline substantially reduced the time required to evaluate pollen germination. The pipeline processed nearly 5,000 images in approximately one hour, substantially increasing throughput and reducing reliance on manual counting. The findings demonstrate that pollen germination is a promising proxy trait for screening reproductive heat tolerance in soybean. Combining controlled environment phenotyping with YOLO-based object detection enabled efficient, accurate, and scalable pollen analysis, and represents the central methodological advance of this study. YOLOv9 performed best among the tested architectures, although discrepancies from manual counts in some images indicate that additional validation is needed. The weak associations with vegetative physiological traits further support the value of direct pollen-based phenotyping.

Why it matches plant phenotyping methods深層学習による花粉画像解析を中心に、花粉発芽という生殖形質を高速・自動測定するハイスループット表現型解析フレームワークを開発・比較・検証している。

abstractThis study presents a high-throughput phenotyping framework that integrates controlled-environment pollen germination assays with deep learning–based object detection for rapid, accurate, and scalable evaluation of reproductive heat tolerance in soybean breeding programs.

AI driven multi modal deep learning system for wheat disease detection, yield prediction, and crop health monitoring →

Sustainable wheat farming is challenging. Real-time information on crop health, disease transmission, and anticipated yields is essential for farmers. However, they frequently use slow, expensive, or non-communicative tools. This project develops a workable solution. There is no need for massive server farms because the entire system operates on a single graphics card. It incorporates images of wheat fields, Indian farming notes, greenhouse records, harvest statistics, and NASA meteorological data. Consider them as various “eyes” for crop photo analysis, and we tried several lightweight computer vision models. ConvNeXt-Tiny was slower but could operate on older equipment with 75% accuracy; EfficientNetB0 recognised wheat heads with 92% accuracy; and AgroMark, a hybrid solution that merged photo analysis with agricultural metadata (soil type, rainfall, increased to 87%, etc. Combining picture analysis with attention mechanisms (CBAM) allowed us to anticipate the amount of wheat that a field will yield based on these photo insights, and the results showed that our predictions were accurate, with an R 2 score of 0.97. Additionally, we developed a versatile detector that simultaneously detects disease, stress, head count, and pests. It is adjusted to deal with training data that is unbalanced (some diseases are common, while others are rare). As we packed everything into a 16-GB graphics card, we spent real time determining which strategies smaller training sets, removing weak features, and adjusting loss functions, work. We encounter real-world obstacles along the road, such as photographs from different locations not always match, mislabeled photographs from different locations not always match, mislabeled diseases, and neglected rare pests. Our step-by-step instructions, charts, and code are available.

Why it matches plant phenotyping methods小麦画像から病害・ストレス・穂数・収量などの植物形質・状態を推定するマルチモーダル手法を開発し、複数モデルの精度比較と実装上の検証を行っており、表現型取得・推定が研究の中心である。

abstractThis project develops a workable solution.

Stress phenotyping of wild desert legume Acacia senegal with machine learning application and phytochemical characterization of bipinnate leaves. →

Plants encounter multiple abiotic stresses. Among them, heat and drought stress play a substantial role in reducing the agricultural productivity of commercial plants. Hence, wild and underutilized plants can be a potential alternative as they are naturally tolerant to extreme climatic conditions and are a rich source of nutrition. Manual stress and disease detection is a laborious and expensive process, and hence automation in this field is required to reduce agricultural losses. This study evaluates the prediction and detection of abiotic stress in Acacia senegal bipinnate leaves, exploring various stress-induced changes using machine learning (ML) algorithms and biochemical analysis. A. senegal , an underutilized edible desert legume, was grown under controlled greenhouse conditions. After 2 months, these plants were segregated into groups and subjected to heat and drought treatments. Image acquisition was performed to obtain a dataset of 3,454 images of A. senegal leaves. Physiological parameters, such as fresh and dry leaf weight, shoot length, number of leaves, and biochemical assays like antioxidant assay (DPPH), total phenolic content (TPC), and total flavonoid content (TFC), were determined. LC-MS/MS analysis was conducted to identify over 50 phytochemical compounds. A hybrid model was developed consisting of a fine-tuned EfficientNet-based Convolutional Neural Network (CNN) followed by a Support Vector Machine (SVM) for the binary classification of A. senegal leaves. The model distinguishes between healthy and stress-affected unhealthy leaves and achieved an accuracy score of 86.6%. This report provides a significant lead toward stress phenotyping and prediction of a bipinnate leaf plant using ML algorithms. The overall study is useful to understand how the stress encountered by arid plants alters the nutritional quality.

Why it matches plant phenotyping methods画像データと機械学習モデルを用いて、アカシア葉の健全・ストレス状態を自動分類する手法を開発・評価しており、植物表現型取得が中心です。

abstractThis study evaluates the prediction and detection of abiotic stress in Acacia senegal bipinnate leaves

AI for Precision Fertilizer and Pesticide Application: An Integrated Real-Time Deep Learning and IoT-Driven Field Management System →

Abstract Blanket-rate agrochemical scheduling — a practice wherein the same quantity of fertilizer or pesticide is spread uniformly across an entire field irrespective of spatial or temporal crop need — persists as the dominant farm management paradigm across rural India and large parts of South Asia. This approach generates cascading inefficiencies: excess nitrogen drains into waterways, off-target pesticide deposits devastate pollinators, input costs erode thin profit margins, and wide-scale greenhouse gas release from soil microbial activity accelerates climate change. The study documented here addresses this challenge through a purpose-built, four-layer intelligent field management platform. The platform ingests continuous data from drone-mounted multispectral cameras, in-field IoT soil probes, a wireless weather station, and cloud-sourced Sentinel-2 satellite imagery, then passes these inputs through a cascaded AI inference stack. A fine-tuned YOLOv8-L network performs real-time pest and foliar disease localisation; a ResNet-50 backbone quantifies canopy health across five stress gradients; a two-layer stacked LSTM projects short-horizon yield trajectories; and a Deep Q-Network autonomously plans drone spray routes weighted by field-specific prescription maps. Field validation spanned two consecutive growing seasons (Rabi 2022–23 and Kharif 2023–24) across six georeferenced plots covering 4.8 ha at Baramati, Maharashtra. Outcome metrics recorded during head-to-head comparison with conventional practice included a disease detection score of 95.6% mAP, a 47.3% reduction in total nitrogen applied, a 38.1% decrease in pesticide volume, and a 22.4% uplift in harvested grain weight. Together, these field-verified numbers substantiate the operational readiness of integrated AI precision agriculture for smallholder deployment.

Why it matches plant phenotyping methodsマルチスペクトル画像・深層学習による病害局在化とキャノピー健康状態の定量化を中核機能とする統合プラットフォームであり、植物の病害状態・生育状態を直接推定して現地検証している。

abstractThe platform ingests continuous data from drone-mounted multispectral cameras, in-field IoT soil probes, a wireless weather station, and cloud-sourced Sentinel-2 satellite imagery, then passes these inputs through a cascaded AI inference stack.

A Three-Dimensional Phenotyping Framework for Quantifying Soybean Resilience to Pest Stress in the Field →

Abstract Biotic stress is a major, yet under-quantified, driver of global soybean yield losses, and field-based phenotyping under pest pressure remains a critical bottleneck for crop improvement. Using multi-temporal data from soybean genotypes grown under insecticide-protected and unprotected conditions in Brazil, we present a UAV-based, large-scale and non-invasive framework for evaluating genotype performance under natural pest pressure. We introduce a three-dimensional metric that jointly captures productivity, feature-level similarity as a proxy for tolerance, and phenological response through days to maturity. This unified formulation enables field-based quantification of pest resilience and replaces labor-intensive and often unreliable direct pest collection and counting. To operationalize this framework, we integrate vegetation indices and self-supervised visual embeddings into a common representation space linking feature stability, performance response and phenological development. This approach enables robust identification of genotypes that maintain feature integrity, minimize developmental delay and sustain yield under pest pressure, with genotypic differences peaking during the pod-fill (R3–R4) and grain-fill (R5.1–R5.5) stages. Overall, this work establishes a scalable, field-ready paradigm for quantifying crop resilience to biotic stress and provides a practical pathway to accelerate breeding for stable yields under real-world agricultural conditions.

Why it matches plant phenotyping methodsUAVによる大規模な圃場フェノタイピング基盤と、植生指数・視覚埋め込みを統合した新しい耐虫性表現型の定量手法が研究の中心である。

abstractwe present a UAV-based, large-scale and non-invasive framework for evaluating genotype performance under natural pest pressure

ELMERF: A deep-learning-assisted hydroponic RGB phenotyping framework for rice seedling salt-stress evaluation and genetic mapping. →

Rice seedling salt-tolerance evaluation commonly relies on visual scoring or destructive assays, which are subjective, labor-intensive, and difficult to standardize for population-level analysis. This study developed a new deep-learning-assisted hydroponic RGB phenotyping framework for standardized salt-stress evaluation and genetic mapping in rice seedlings. The framework integrates controlled hydroponic cultivation, RGB imaging, RicePhenoSeg-assisted annotation and trait extraction, ELMERF-based semantic segmentation, and image-derived quantification of salt-induced shoot injury. Using this framework, we constructed the Rice Seedling-Salt RGB Dataset (RSSD), which contains green shoot tissues, yellow shoot tissues, roots, and background from hydroponically grown rice seedlings. Based on RSSD, ELMERF achieved a mean Intersection over Union of 51.4% and a mean Accuracy of 89.5%, outperforming nine representative segmentation models. We further defined shoot yellowing rate (SYR) as an image-derived quantitative trait describing visible salt-induced shoot injury. The framework was applied to 261 re-sequenced rice accessions for population-level phenotyping and genome-wide association analysis. Compared with standard evaluation score and seedling death rate, SYR showed a more continuous phenotypic distribution and detected 36 significant SNPs, including a major signal near the Saltol/OsHKT1; 5 region. Notably, 34 SYR-associated SNPs were not detected by conventional visual scores. Overall, this study provides a targeted hydroponic RGB phenotyping framework for standardized rice seedling salt-stress evaluation and genetic analysis.

Why it matches plant phenotyping methods深層学習によるRGB画像セグメンテーション、形質抽出、データセット構築、性能比較を中核とし、画像由来の塩ストレス傷害形質を定量化する植物フェノタイピング手法である。

abstractThis study developed a new deep-learning-assisted hydroponic RGB phenotyping framework for standardized salt-stress evaluation and genetic mapping in rice seedlings.

An Embedded AI System for Automated Crop irrigation and pest Monitoring →

Modern agriculture is rapidly adopting Artificial Intelligence (AI) and Internet of Things (IoT) technologies to improve crop monitoring and decision-making. Many existing systems focus either on water stress detection or pest detection separately. The proposed system integrates both functions into a single platform. It uses a camera module and environmental sensors connected to a Raspberry Pi (5/4) as the main controller. A Convolutional Neural Network (CNN) model processes leaf images captured by the AI camera, while a soil moisture sensor supports water stress analysis. The system classifies crops into three categories: healthy, water-stressed, and pest-infected. Based on the output, it provides real-time recommendations for irrigation and pesticide application. This reduces manual inspection, prevents unnecessary chemical usage, saves water, and improves crop productivity.

Why it matches plant phenotyping methods植物の葉画像と土壌水分センサーを用いて、健康・水ストレス・害虫感染という植物の状態を自動分類する統合センシング基盤を開発しており、表現型取得・判定が中心的です。

abstractThe proposed system integrates both functions into a single platform.

A practical phenotyping framework for root system architecture reveals enhanced root vigor in an Aegilops tauschii -derived wheat line →

Wild-relative introgression broadens wheat diversity, as exemplified by the Multiple Synthetic Derivatives (MSD) population, a unique hexaploid wheat resource capturing extensive genetic diversity from Aegilops tauschii. However, root system architecture (RSA), a key determinant of resource acquisition and stress adaptation, remains poorly characterized in this population. Here, we established a practical two-dimensional root phenotyping framework that enables continuous imaging to track RSA traits and their responses to heat stress. Using this framework we evaluated MSD417 as a representative genotype against its recurrent parent, Norin 61 (N61). Under control conditions, MSD417 displayed greater total root length, root system width, and convex hull area than N61 (p < 0.001), indicating enhanced early root vigor. MSD417 also exhibited larger second pair seminal root angle (p < 0.001) and length (p < 0.01) across both conditions, suggesting enhanced horizontal root exploration while maintaining similar rooting depth to N61 (p = 0.981). Heat stress reduced overall root growth and narrowed genotypic differences, limiting RSA expression. Microscopic observations revealed a lower coleorhiza height-to-width ratio in MSD417. These findings demonstrate the effectiveness of the two-dimensional platform for early-stage RSA phenotyping and highlight Aegilops tauschii-derived germplasm as a source of favorable root traits in wheat breeding.

Why it matches plant phenotyping methods二次元画像による根系構造フェノタイピング基盤を構築し、連続撮像で根形質を追跡する方法が研究の中心であるため含める。

abstractHere, we established a practical two-dimensional root phenotyping framework that enables continuous imaging to track RSA traits and their responses to heat stress.

Evaluation of cold resistance in pear ( Pyrus L.) germplasms: integrating physiological and biochemical responses with anatomical traits under low temperature stress. →

Low temperature stress severely restricts the cultivation and distribution of pear ( Pyrus L.) germplasms, frequently resulting in frost injury and yield reduction. To accurately evaluate the cold resistance of pear germplasm resources, this study investigates the physiological and biochemical responses of one-year-old branches to different degrees of low-temperature stress, as well as differences in the tissue structure of these pear germplasms after low-temperature stress. In this study, 122 pear germplasms were classified into high (HR), medium (MR), and low (LR) cold-tolerance categories based on their semi-lethal temperature (LT 50 ). Further analysis of pear germplasms with different levels of cold resistance revealed that, with decreasing temperature, HR germplasms exhibited smaller increases in relative electrolyte conductivity (REC) and malondialdehyde (MDA) content and higher accumulation of proline (Pro), soluble proteins (SP), soluble sugars (SS), and peroxidase activity compared with LR germplasms. In addition, the peak values of these indicators generally occurred at lower temperatures in HR germplasms. A correlation analysis and principal component analysis indicated that physiological indices, including REC, bound water/free water ratio, SS, and MDA, as well as branch anatomical traits related to xylem and cortex proportions, were closely associated with variation in LT 50 . An integrated assessment using membership function analysis produced rankings consistent with LT 50 -based clustering, supporting the reliability of the multivariate evaluation framework. Overall, this study establishes an integrated, indicator-based approach for evaluating cold resistance in pear germplasm by integrating physiological, biochemical, and anatomical characteristics. These results provide a theoretical basis and methodological reference for screening cold resistance germplasms.

Why it matches plant phenotyping methods生理・生化学・解剖学的形質を統合し、LT50と多変量評価によってナシ遺伝資源の耐寒性を分類・スクリーニングする評価フレームワークが研究の中心である。

abstractTo accurately evaluate the cold resistance of pear germplasm resources, this study investigates the physiological and biochemical responses of one-year-old branches to different degrees of low-temperature stress, as well as differences in the tissue structure of these pear germplasms after low-temperature stress.

An Explainable Hybrid Deep Learning–Fuzzy Decision Framework for Human-Centered Plant Stress Severity Assessment →

Abstract Mild stress is often difficult to distinguish from non-stress signals that may even mask the detection of stress; therefore, early diagnosis and precision grading of plant/microbial stress severity are essential for sustainable precision agriculture toward achieving optimized yields. We propose an interpretable hybrid deep learning–fuzzy decision framework combining EfficientNet B7 and Inception-ResNet-v2 with multiscale feature aggregation integrating Sparse Pyramid Pool (SPP) and Atrous Spatial Pyramid Pooling (ASPP). A Gaussian-based fuzzy inference system is incorporated to derive severity reasoning in a linguistically interpretable manner to address uncertainty and overlapping stress stages. Unlike conventional approaches evaluated only on controlled datasets, the proposed framework is validated through stringent cross-dataset generalization between the PlantVillage and PlantDoc datasets. The model demonstrates robustness under environmental disturbances and passes statistical significance tests. On the PlantVillage benchmark, the framework achieves an exact-match accuracy of $97.82\%$, a macro F1-score of $97.60\%$, and an AUC of $0.979$. When evaluated across a different domain, the performance decreases by only $4.8\%$, indicating strong generalization capability. The integration of fuzzy logic reduces adjacent-class error by $3.4\%$ and improves probability calibration with an Expected Calibration Error (ECE) of $0.021$. Grad-CAM visualizations and saliency analyses further confirm that the model focuses on biologically relevant diseased regions. These results demonstrate that combining multiscale deep feature learning with structured fuzzy reasoning enhances robustness, interpretability, and decision stability, thereby supporting human-centered agricultural monitoring systems.

Why it matches plant phenotyping methods植物のストレス重症度を画像から推定する深層学習・ファジー推論手法を開発し、異なるデータセット間で検証しているため、植物フェノタイピング手法が中心である。

abstractWe propose an interpretable hybrid deep learning–fuzzy decision framework

CoNutriNet: a dual-branch architecture with DenseNet and graph-enhanced attention network for coffee nutrient deficiency classification. →

Introduction Nutrient deficiencies in coffee plants significantly impact bean quality and yield, making timely detection crucial for successful cultivation. Current assessment methods rely on manual inspection, which is labor-intensive and time-consuming, posing challenges for large-scale field management. This approach often results in inconsistent evaluations and delayed interventions. Methods This study presents CoNutriNet, an automated deep learning architecture that integrates DenseNet121 with a novel Graph-Enhanced Attention Feature Network (GEAFNet) for classifying nutrient deficiencies in coffee leaves. DenseNet121 provides deep hierarchical and regional feature representation, while GEAFNet captures local, fine-grained spatial features through Inception, Ghost, and Efficient Channel Attention (ECA) modules. Furthermore, a Graph Convolutional Network (GCN) is included to model spatial dependencies and structural variations between leaf regions. Feature representations from both pathways are concatenated and refined using a Coordinate Attention (CA) module to enhance discriminative capability. Results Evaluation on the CoLeaf dataset demonstrates that CoNutriNet achieves an accuracy of 94.5%. The integration of lightweight attention mechanisms, dense connectivity, and graph-based modeling improves both performance and computational efficiency. Conclusion These results indicate that CoNutriNet achieves and efficient performance in nutrient deficiency detection in coffee crops, highlighting its potential for deployment in agricultural environments to support precision farming and optimize yield.

Why it matches plant phenotyping methodsコーヒー葉の栄養欠乏という植物状態を画像から分類する深層学習手法を開発し、データセットで性能評価しており、表現型取得・推定が研究の中心である。

abstractThis study presents CoNutriNet, an automated deep learning architecture that integrates DenseNet121 with a novel Graph-Enhanced Attention Feature Network (GEAFNet) for classifying nutrient deficiencies in coffee leaves.

High-throughput hyperspectral phenotyping and transcriptomics reveal expression networks associated with nitrogen-limitation-induced senescence in sorghum →

Abstract Background Sorghum ( Sorghum bicolor ) is a versatile C4 crop used for food and feed and as biomass for bioproducts and energy. Improving nitrogen use efficiency (NUE) in sorghum is important because fertilizer is costly and excessive fertilizer use has negative environmental impacts. Leaf senescence mediates nutrient recycling, but its dynamic progression is difficult to quantify at scale. We evaluated whether visible-near-infrared hyperspectral imaging can provide high-throughput measures of N-limitation-induced senescence in sorghum and link these phenotypes to gene expression. Sorghum Tx430 plants were grown under four N treatments (6, 9, 12, and 15 mM), imaged from vegetative growth through grain fill, and destructively sampled for RNA-seq at four developmental stages. Results A supervised support vector machine with a radial basis function kernel classified pixels from a hyperspectral image of sorghum plants grown under different N levels into green leaf, yellow leaf, dry leaf, stalk, panicle, and background classes with 0.93 accuracy. We defined the senescence ratio as the sum of yellow and dry leaf areas divided by the green leaf area and computed it across multiple growth stages and nitrogen levels. The senescence ratio did not differ among N treatments during vegetative growth, but it declined with increasing N during boot, anthesis, and grain fill, indicating earlier senescence under N limitation. Among the genes whose expression positively correlated with senescence ratio were 13 putative transcription factors, including SbiRTX430.02G247100, a WRKY1/ZAP1 homolog and a WRKY4 homolog. Gene regulatory network analysis of the top 1% of genes associated with SbiRTX430.02G247100 showed enrichment for processes associated with leaf senescence and chlorophyll catabolism. In contrast, the network associated with the WRKY4 homolog was enriched for autophagy-related terms. Conclusions Our study shows that automated hyperspectral imaging is highly effective for monitoring dynamic plant phenotypes, such as stress-induced senescence, that are difficult to visually score with the naked eye. Here, nitrogen deficiency served as the stress condition. Still, this approach supports large-scale phenotypic data collection for any such stressor and enables analyses with greater statistical power, yielding more robust conclusions and the potential for new insights that can be applied to engineering and breeding better crops.

Why it matches plant phenotyping methodsソルガムの動的な老化表現型を高スループットに取得する hyperspectral imaging と、SVMによる画像分類・senescence ratio算出が研究の中心であり、植物状態の定量化手法を実証している。

abstractWe evaluated whether visible-near-infrared hyperspectral imaging can provide high-throughput measures of N-limitation-induced senescence in sorghum

Identification of candidate genes involved in root gall formation during early infection of Plasmodiophora brassicae in B.napus . →

Clubroot disease, caused by Plasmodiophora brassicae , is one of the major constraints in rapeseed production. Breeding disease-resistant cultivars is the best way to control this devastating disease. However, breeding reliable resistant germplasm and genes is limited. Inactivation of susceptible genes has been shown to be a new and effective strategy for developing resistant crops. Therefore, we aimed to screen key candidate susceptible genes in this study. Firstly, we established a stable, high-throughput visualization method for identifying gall formation at the early stage of P.brassicae infection. At 14 days post-inoculation (dpi), the earliest time point with a clear record of scorable root swelling, remarkable variations in the speed of gall formation were observed among 85 genotypes. Secondly, genome-wide association studies (GWAS) were performed to identify genes involved in gall development. Three and two consecutive significant peaks were detected at 14 and 21 dpi, respectively. Thirdly, comparative transcriptomic analysis was conducted between 2AF195 and 2AF058 at 7 and 14 dpi; these two materials exhibit contrasting speeds of gall development. Gene clustering analysis revealed two opposite expression patterns at 14 dpi. One pattern comprised 1,383 genes downregulated in 2AF195 but upregulated in 2AF058, which were significantly enriched in 10 KEGG pathways, including Environmental Information Processing and Plant-pathogen interaction, and involved core repressors JAZ8/10 in the jasmonic acid (JA) signaling pathway, as well as nucleotide-binding site (NBS) protein-encoding genes. The opposite pattern consisted of 79 genes upregulated in 2AF195 but downregulated in 2AF058, which were enriched in an additional 10 KEGG pathways, predominantly related to Carbohydrate Metabolism and the Ubiquitin System. These genes were functionally annotated mainly as pectin methylesterases, xyloglucan endotransglucosylase/hydrolases (XTHs), and lignin biosynthesis-related enzymes. These findings demonstrated that distinct regulatory networks exist in different susceptible rapeseed genotypes. Finally, through the combined analysis of haplotype and transcriptome data, we co-localized and identified the candidate gene BnaC08g46100D , a nodulin-related gene belonging to the MtN21 transporter family. These results provide a theoretical basis for developing novel disease-resistant materials by editing the key susceptibility genes involved in root gall formation. The candidate genes identified in this study are the most promising targets for this purpose.

Why it matches plant phenotyping methods根こぶ形成を高スループットに可視化・判定する方法の確立が明示され、感染植物の病徴を測定する手法として研究の主要な技術要素になっている。

abstractwe established a stable, high-throughput visualization method for identifying gall formation at the early stage of P.brassicae infection.

PhenoRob-P: An autonomous robotic system for high-throughput phenotyping of potted plants →

High-throughput phenotyping is essential for resolving genotype-by-environment interactions and accelerating crop breeding. In greenhouse potted-plant systems, narrow aisles, global navigation satellite system (GNSS)-denied operation, variable pot layouts, and plant-level data traceability constrain repeatable automated phenotyping. This study presents PhenoRob-P, a modular autonomous robotic system designed for potted crops in structured facility environments. The system integrates a compact two-wheel differential chassis, a LiDAR–vision fusion framework for row-level navigation, pot-level target identification and local alignment, a six-degree-of-freedom robotic arm with inverse-kinematics-based real-time pose compensation for repeatable multi-view close-range imaging, and a three-tier User–Cloud–Robot platform for task scheduling, remote monitoring, and closed-loop data management. Greenhouse validation showed throughputs of 520 pots/h in continuous scanning mode and 187 pots/h in multi-view fine inspection mode. At travel speeds of 0.2–0.3 m/s, mean terminal positioning errors remained within 30 mm, and approximately 87% of lateral and longitudinal errors fell within ±30 mm. Biological validation demonstrated time-resolved stress phenotyping in wheat, with color indices capturing drought progression and rewatering recovery. For maize, multi-view three-dimensional reconstruction estimated plant height and stem diameter with R 2 values of 0.940 and 0.845, respectively, relative to manual measurements. These results show that PhenoRob-P provides an integrated perception-localization-acquisition-analysis workflow for high-throughput, traceable, and time-resolved phenotyping of potted crops.

Why it matches plant phenotyping methods植物形質の取得を中核とする自律ロボット型ハイスループット表現型解析プラットフォームを開発・検証しており、画像取得、3D再構成、ストレス・形態形質の推定性能も評価している。

abstractThis study presents PhenoRob-P, a modular autonomous robotic system designed for potted crops in structured facility environments.

Integrating longitudinal hyperspectral phenotyping with AI and GWAS to dissect barley waterlogging responses →

Abstract Waterlogging is a major constraint on barley productivity, yet its dynamic, multi-phase nature makes it challenging to dissect using traditional phenotyping approaches. High-throughput phenotyping (HTP) platforms address this by enabling temporal, multi-sensor imaging of large populations, but generate complex datasets that demand new analytical frameworks. Here, we imaged 230 barley accessions over 14 days of waterlogging stress and seven days of recovery using visible, chlorophyll fluorescence, and hyperspectral sensors. Explainable AI was applied to classify stress responses into early stress, late stress, and recovery phases, achieving 86% classification accuracy, and to identify the hyperspectral indices most informative for each phase. Water index (WATER1) and structure insensitive pigment index (SIPI) emerged as primary predictors of stress response. Longitudinal genome-wide association studies (GWAS), using a treatment-by-marker interaction model, identified 236 significant loci across 12 linkage disequilibrium blocks, implicating candidate genes involved in oxidative stress regulation, transcriptional control, and auxin transport. MYB transcription factors were consistently identified across all stress phases, underscoring their central role in waterlogging adaptation. To support interpretation of longitudinal GWAS results, we developed 3D-QTLVis, an interactive visualisation tool that extends Manhattan plots across time, enabling clearer identification of dynamic genomic regions underlying stress tolerance.

Why it matches plant phenotyping methods長期マルチセンサー画像による水ストレス応答の表現型取得と、AIによるフェーズ分類・指標抽出が研究の中心であり、3D-QTLVisも開発している。

abstractHigh-throughput phenotyping (HTP) platforms address this by enabling temporal, multi-sensor imaging of large populations

Variability in crop responses as a function of environment affects the NDVI relationship with grain yield in wheat. →

Advancing wheat breeding requires reliable digital traits that capture genotype × environment interactions and improve yield prediction across diverse growing conditions. Although vegetation indices such as the normalized difference vegetation index (NDVI) are widely used, their performance relative to yield variability and environmental stress remains underexplored in multi-environment trials. This study utilized unmanned aerial vehicle multispectral imagery to derive NDVI and assess its relationship with grain yield in 34 spring and winter wheat variety trials. These trials included data across seven Washington State locations in different precipitation zones, five years (2019 to 2023), and some irrigated trials. Environments were grouped into high-, moderate-, and low-stress clusters based primarily on precipitation and temperature. Variability was quantified using the coefficient of variation, and correlations between grain yield and NDVI were evaluated within and between varieties across environments based on market classes (hard and soft spring and winter wheat). Across all environments and varieties, NDVI strongly correlated with grain yield ( r = 0.79-0.82, p r = 0.72 in hard spring, r = 0.53 in soft spring). These conditions also improved discrimination between varieties. Although heritability patterns were not clearly differentiated by stress clusters, environments with higher genetic control of yield also tended to show stronger NDVI heritability. Overall, NDVI reliably captured wheat grain yield, which is governed by the genotype × environment driven variability, with its predictive value strongest in stress-prone conditions. These findings underline NDVI's usability as a practical digital trait for improving variety testing and guiding breeding decisions in challenging environments.

Why it matches plant phenotyping methodsUAVマルチスペクトル画像からNDVIを抽出し、複数環境・品種で収量との関係、予測性、遺伝率を評価しており、デジタル植物形質の測定・検証が中心である。

abstractThis study utilized unmanned aerial vehicle multispectral imagery to derive NDVI and assess its relationship with grain yield in 34 spring and winter wheat variety trials.

Ecological insights from transferable plant biomass mapping across the arctic using high-resolution structure-from-motion and LiDAR data →

Abstract Warmer temperatures, permafrost thaw, and increased wildfire activity are driving rapid ecological change across the Arctic, significantly altering plant productivity and aboveground biomass (AGB). These rapid changes highlight the urgent need to improve monitoring of vegetation dynamics in the Earth’s northern ecosystems, where high spatiotemporal heterogeneity occurs at scales finer than those captured by traditional satellite observations. The growing use of unoccupied aerial systems (UASs) presents an opportunity to overcome this limitation. Yet, the diversity of UAS platforms, sensors, and data collection and processing workflows presents challenges for developing standardized, generalizable approaches. To address this challenge, we compiled 672 AGB plots co-located with 183 UAS-based structure-from-motion (SfM) or light detection and ranging (LiDAR) surveys collected across the Arctic. Here, we: (1) evaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB, (2) assessed scaling errors and their sources in two recent satellite-based AGB products derived from Landsat and moderate resolution imaging spectroradiometer, and (3) demonstrated the use of high-resolution AGB maps to quantify biomass variation across tundra plant functional types (PFTs) and to monitor post-fire recovery. Our results show that both SfM and LiDAR accurately captured AGB and its variability across tundra PFTs using a random forest model (overall root mean squared error: 0.332 kg m –2 ), with mapping performance varying slightly by region and data source. Using UAS-derived AGB maps as a benchmark, we identified systematic biases in satellite-derived AGB products, largely attributable to the magnitude of AGB and structural heterogeneity within coarse-resolution pixels. Applying our model to repeat UAS surveys following a tundra fire on Seward Peninsula, we observed rapid AGB recovery in non-shrub patches, with biomass recovering to pre-fire levels within two years. In contrast, shrub patches recovered more slowly, with AGB gains continuing over 2–4 years through both in-patch growth and lateral expansion (via dispersal) into remaining burned areas. Overall, these findings support the generalizability of UAS-based SfM and LiDAR data for estimating tundra AGB and highlight the need for broader collection and synthesis of such data to improve ecological monitoring and model benchmarking in the Arctic.

Why it matches plant phenotyping methodsUASのSfMおよびLiDARから植物群落の地上部 biomass (AGB) を推定する手法の一般化性能を評価し、衛星推定値のベンチマークにも用いており、植物形質取得が研究の中心である。

abstractevaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB

Integrating image-based phenotyping and GWAS to map resistance to spittlebug nymphs in interspecific Urochloa grasses →

Urochloa grasses are among the most widely used forage grasses across the tropics. Spittlebugs (Hemiptera: Cercopidae) are major pests of tropical Urochloa (syn. Brachiaria) grass pastures, severely reducing forage productivity and quality. Understanding the genetic basis of host-plant resistance is essential for developing durable resistant cultivars. Here, we combined high-throughput image-based phenotyping and genome-wide association studies (GWAS) to dissect the genetic architecture of response to Aeneolamia varia nymphs in 339 interspecific F1 hybrids derived from crosses between resistant sexual and susceptible apomictic Urochloa parents. Digital image analysis using both unsupervised (DQU) and supervised (DTR) quantification pipelines enabled accurate estimation of plant damage, yielding moderate to high broad-sense heritability estimates (H2 = 0.49 to 0.66). In contrast, insect survival (NTS) exhibited low to moderate correlations with all damage traits and lower heritability estimates (H2 = 0.42). Using 57,051 high-quality SNPs aligned to the genome of the hybrid cultivar Basilisk, GWAS models identified 18 quantitative trait loci (QTLs) for plant damage traits, but none for insect survival (antibiosis). Six robust QTLs on chromosomes 1, 6, 7, 27, 29, and 36 were consistently detected across models and phenotyping methods, explaining up to 21.5% of phenotypic variance. Candidate gene analysis revealed proteins involved in hormone signaling, oxidative stress response, and cell wall modification, suggesting multifaceted plant-insect interaction mechanisms. These results provide a foundational set of molecular markers associated with spittlebug response in Urochloa grasses, useful for marker-assisted and genomic selection in the forage breeding program.

Why it matches plant phenotyping methods高スループット画像表現型解析と、植物損傷を推定する2つの画像解析パイプラインが研究の中心であり、異なる手法間の比較と形質推定性能も評価している。

abstractHere, we combined high-throughput image-based phenotyping and genome-wide association studies (GWAS) to dissect the genetic architecture of response to Aeneolamia varia nymphs

Hyperspectral imaging of Marchantia →

Hyperspectral imaging is an imaging technique that allows for acquisition of high-resolution spectral information beyond that of the visible spectrum. When applied to plants, it effectively enables non-invasive characterization of physiological status and has been widely used in agricultural settings. Marchantia is a model bryophyte species whose flat morphology and visually distinct stress-response phenotypes makes it an ideal candidate for imaging studies. Here, we provide a comprehensive protocol for hyperspectral imaging for Marchantia plants, which encompasses hardware configuration, data acquisition, and computations processing. This protocol features a streamlined data processing pipeline hosted on a web-based development platform that automates 1) the segmentation of plant area into spatially distinct regions for localized analysis of intra-specimen physiological gradients, and 2) classification of plant pixels based on their spectral signatures. All results are exported as structured CSV files for ease of further analysis as desired by the user.

Why it matches plant phenotyping methodsマーチャンティアを対象としたハイパースペクトル撮像プロトコルと、植物領域のセグメンテーション・スペクトル分類を含む処理パイプラインを開発しており、植物の生理状態取得が中心的な方法論的貢献である。

abstractHere, we provide a comprehensive protocol for hyperspectral imaging for Marchantia plants, which encompasses hardware configuration, data acquisition, and computations processing.

Geospatial multi-scale GNN for urban food security in climate-stressed environments. →

The increasing global food insecurity driven by climate-induced natural hazards and soil degradation has made the resilience of alternative agricultural systems a critical focus in risk management. This study presents a geospatially integrated monitoring framework, the Optimized Multi-Scale Adaptive Graph Neural Network (OMSA-GNN), designed to mitigate risks associated with nutrient instability in hydroponic and aeroponic environments. The proposed system leverages a Raspberry Pi-based IoT network to monitor complex interactions among microclimatic variables, plant physiological health, and nutrient concentrations, treating them as localized geospatial data points. To enhance decision-making under environmental uncertainty, an Improved Sparrow Search Algorithm (ISSA) is employed to optimize the predictive performance of the GNN. The OMSA-GNN model incorporates visual plant indices as a proximal remote sensing approach to enable early detection of physiological stress that may lead to crop failure. Evaluated using a lettuce growth dataset, the framework demonstrates superior performance in forecasting growth trajectories and managing resource-related risks compared to conventional static models. The results highlight a scalable approach for improving the reliability of urban food systems, where traditional land-based agriculture is increasingly vulnerable to natural hazards.

Why it matches plant phenotyping methods植物の生理的ストレスと成長軌跡を、視覚的植物指数およびIoTセンサーデータから推定するGNNベースの監視・解析手法が研究の中心であり、植物表現型取得と予測に該当する。

abstractThe OMSA-GNN model incorporates visual plant indices as a proximal remote sensing approach to enable early detection of physiological stress that may lead to crop failure.

Handheld hyperspectral imaging dataset of annual sowthistle and little mallow under abiotic stress for machine learning. →

Machine learning has become an increasingly important tool for overcoming agricultural challenges by enabling efficient and consistent classification of crop-related data. Training such supervised models requires high quality labeled datasets. This work presents a dataset consisting of raw and preprocessed hyperspectral imaging (HSI) files capturing reflectance in the visible to near-infrared range (400-1000 nm) from two problematic weed species on California's Central Coast: annual sowthistle ( Sonchus oleraceus ) and little mallow ( Malva parviflora ). Hyperspectral imaging provides rich spectral-spatial data cubes that can support the development of deep learning models and autonomous technology for precision weed management. Plants were grown in a greenhouse under five conditions: standard, drought, overwatering, excess fertilizer, and no fertilizer. Custom MATLAB scripts were utilized for preprocessing, including k-means clustering to define regions of interest (ROIs), and extraction of spectral metrics. Data visualization was performed using Wolfram language and MATLAB. The dataset includes both raw and ENVI-formatted hyperspectral cubes and pre-processed MATLAB outputs, supporting spectral feature engineering, benchmark development, and exploratory machine learning workflows for controlled environment stress classification.

Why it matches plant phenotyping methods植物のストレス状態を対象とするハイパースペクトル画像データセットで、ROI抽出・スペクトル指標化と機械学習ベンチマークを中心的に提供しているため、植物フェノタイピング手法・データセットとして適格。

abstractThis work presents a dataset consisting of raw and preprocessed hyperspectral imaging (HSI) files capturing reflectance in the visible to near-infrared range (400-1000 nm) from two problematic weed species

Projecting 2D top-view of PSII efficiency onto 3D plant models to quantify PSII efficiency across canopy layers. →

Background High-throughput automated image analysis holds great promise for plant breeding by enabling faster, more accurate assessment of traits relevant to crop improvement. Imaging-based systems, such as the CropReporter, allow automated quantification of photosynthetic parameters like PSII efficiency under ambient light from a top-down 2D perspective. However, standard analysis tools average values across the 2D top view, overrepresenting upper leaves and underrepresenting those in the lower canopy. Upper leaves may occlude lower ones, and due to the pinhole projection of the camera, lower leaves of the same size appear smaller in the image. Consequently, vertical heterogeneity in PSII efficiency within the canopy cannot be resolved using a single 2D image. Results To address these issues, we integrated top-view PSII efficiency data (by CropReporter) with 3D structural data from RGB point clouds (by MaxiMarvin). Alignment accuracy between MaxiMarvin and CropReporter was high, with R² ≥ 0.98 for the x-axis and R² ≥ 0.99 for the y-axis. The method was tested using Chenopodium quinoa, Glycine max, and Solanum tuberosum, exposed to salinity, waterlogging and drought stress respectively. In Chenopodium quinoa, it allowed precise determination of when senescence began in the lower leaves. In Solanum tuberosum, the reduction in PSII efficiency by drought was the same for all leaf layers, while in Glycine max, waterlogging stress most strongly affected the middle layer of the canopy. Conclusions This framework enables the 3D mapping of PSII efficiency across the vertical plant profile by combining top-view chlorophyll fluorescence imaging (CropReporter) with 3D structural data (MaxiMarvin). It reveals vertical variation in photosynthetic activity across canopy layers. With standard 2D chlorophyll fluorescence imaging it is difficult to distinguish between non-photosynthetic tissues like flower heads and lower layers of leaves, that might have the same PSII values. Using height-based filtering, taking data from the 3D mapping, such distinction can be made with the method presented in this paper. This allows estimating the PSII efficiencies of leaves only. By capturing layer-specific responses to abiotic stress and developmental changes, the method provides physiologically relevant input for crop growth modelling and highlights the importance of accounting for canopy structure in photosynthetic analyses.

Why it matches plant phenotyping methods2Dクロロフィル蛍光によるPSII効率を3D植物構造へ投影し、群落層別の葉の生理形質を推定する手法の開発・検証が中心である。

abstractTo address these issues, we integrated top-view PSII efficiency data (by CropReporter) with 3D structural data from RGB point clouds (by MaxiMarvin).

Perceptual graph kernels for image-derived plant trait interaction analysis in precision agriculture →

Latest imaging technologies play a vital role in the extraction of plant phenotypic traits in high ranges. Most existing analytical methods treat these traits as independent features, overlooking the complex interaction patterns that focus on plant responses to environmental stress. Proposed Perceptual Graph Kernel (PGK) framework model address the limitation in terms of image-derived phenotypic traits plat information graph structured interaction networks leverages perceptual similarity learning to capture higher-order phenotypic patterns. In the PGK framework, traits extracted from RGB (Red, Green, Blue) and multispectral imagery are encoded as nodes, and biologically meaningful relationships amongst trait pairs are represented as weighted edges. Extracted trait values are continuously transformed into perceptual states to enhance biological interpretability, and a graph kernel is employed to measure similarity between trait graphs. Experiments performed in an agricultural field with a precision agriculture dataset for plant stress phenotyping demonstrated that the proposed PGK achieved 93.8% classification accuracy, improving performance by 5.3 percentage points over the CNN baseline. The outcome results clearly highlight the effectiveness of the perceptual graph model for plant phenotyping and provide a robust, interpretable computational framework for sustainable crop monitoring and decision-support in precision agriculture.

Why it matches plant phenotyping methods画像由来の植物形質を抽出・関係グラフ化し、ストレス表現型分類を行う計算手法が研究の中心であるため。

abstractProposed Perceptual Graph Kernel (PGK) framework model address the limitation in terms of image-derived phenotypic traits

High-throughput screening of heat stress response in Chinese cabbage (Brassica rapa L. ssp. pekinensis) seedlings using integrated 3D multispectral phenotyping and time-series analysis →

Climate change threatens global Chinese cabbage ( Brassica rapa L. ssp. pekinensis ) production, a cool-season crop essential for Asian markets. With optimal growth at 18-20°C and severe disruption above 25°C, developing heat-resilient varieties is critical. This study integrated high-throughput 3D multispectral phenotyping with multivariate analysis to characterize temporal heat stress responses in 18 Chinese cabbage genotypes. Seedlings were subjected to heat stress (setpoint 40/35°C day/night; measured 35.7/31.5°C day/night air temperature) or controls (setpoint 25/20°C day/night; measured 25.0/17.7°C day/night air temperature) for 14 days, with continuous non-destructive monitoring of 14 morphological and spectral parameters using PlantEye F600 multispectral 3D scanner. Principal component analysis of temporal phenotyping data explained 62-68% of variance, enabling quantitative assessment of phenotypic stability through Euclidean distance measurements in PC space. Temporal analysis revealed crop-specific response patterns with maximum treatment separation at 3 days after treatment (DAT) (ΔC=3.27), reflecting Chinese cabbage’s rapid heat sensitivity as a cool-season crop, followed by progressive acclimation by 14 DAT (ΔC=1.41). Early responses (3-5 DAT) were dominated by morphological parameters, transitioning to physiological adjustments (10-14 DAT) characterized by spectral indices. Under heat stress, plants prioritized evaporative cooling through increased transpiration (four-fold increase) over carbon assimilation. A critical finding was the disproportionately greater reduction in root biomass relative to shoot biomass under to heat stress, with root biomass declining 38-47% versus 20% in shoots. Strong correlations (r>0.8) between 3D imaging parameters and destructive biomass measurements validated the non-destructive approach’s reliability. Notably, image-based root surface area analysis correlated strongly with actual root biomass (R 2 =0.698, p<0.001), enabling practical assessment of root area without conventional destructive processing. Based on integration of phenotypic stability (Euclidean distances in PC space) and biomass production under heat stress, this approach identified four distinct heat tolerance strategies: stable-productive genotypes (ideal breeding targets combining phenotypic stability with high heat-stress biomass production), stable-conservative genotypes (phenotypic stability with lower production), plastic-productive genotypes (substantial phenotypic changes yet high biomass production), and plastic-sensitive genotypes (phenotypically unstable and poor biomass production). This validated framework accelerates heat-tolerant Chinese cabbage breeding through efficient high-throughput phenotyping, enabling targeted genotype selection for diverse production environments facing climate warming.

Why it matches plant phenotyping methods3Dマルチスペクトルスキャナによる非破壊・時系列表現型取得と、その解析・検証が研究の中心であり、熱ストレス下の形態・生理形質を定量化する実質的なハイスループット表現型解析研究である。

abstractThis study integrated high-throughput 3D multispectral phenotyping with multivariate analysis to characterize temporal heat stress responses in 18 Chinese cabbage genotypes.

RGB image-based drought stress classification of garden plants using SVM model. →

Climate change-induced drought increasingly constrains water management in mixed-species urban gardens, requiring scalable and non-destructive approaches. This study proposes an integrated framework combining chlorophyll fluorescence, RGB image indices, and machine learning to classify plant drought response patterns. Ten garden plant species were evaluated under varying soil moisture conditions. Hierarchical cluster analysis integrating fluorescence parameters and RGB indices identified three physiologically defined response clusters, and their reproducibility using RGB indices alone was assessed. A total of 1,629 samples were augmented to 1,881 using the synthetic minority over-sampling technique (SMOTE) to address class imbalance. A support vector machine (SVM) model with a radial basis function kernel, using green leaf index (GLI), normalized green-red difference index (NGRDI), blue-green pigment index (BGI), and soil moisture (%) as predictors, achieved an accuracy of 0.91 and a Kappa coefficient of 0.84. In contrast, PLS-DA showed lower performance (accuracy 0.79, Kappa 0.65), indicating limited separability under linear assumptions. These results demonstrate that RGB indices combined with nonlinear models were able to reproduce physiologically defined drought response patterns under the given conditions. As a proof of concept, this study demonstrates the potential of the proposed framework; however, its generalizability is limited by the controlled greenhouse setting, the relatively small number of species, and the lack of external validation in heterogeneous field environments. The framework may provide a cost-effective approach for classifying plant drought responses and has the potential to support the grouping of plants with similar water requirements, which could contribute to improved irrigation management in mixed-species gardens under further validation.

Why it matches plant phenotyping methodsRGB画像指標と機械学習により、植物の干ばつ応答パターンという生理状態を分類し、蛍光測定との再現性を評価しているため、表現型取得・抽出手法が中心です。

abstractThis study proposes an integrated framework combining chlorophyll fluorescence, RGB image indices, and machine learning to classify plant drought response patterns.

Quantifying Growth and Lodging in Tef ( Eragrostis tef ) With Uncrewed Aerial Systems (UAS) →

ABSTRACT Lodging is a major contributor to decreased yield in tef, a staple cereal crop in Ethiopia. Semidwarf varieties have been developed with a goal to increase yield through reduced lodging, but studying lodging susceptibility currently requires a labor‐intensive, imprecise, manual scoring method. Here we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event. We compare 3D point clouds generated by photogrammetry from RGB images with those generated from LiDAR to estimate height, demonstrating that they produce similar results, despite differences in cost. Stand height and lodging can both be accurately measured with low‐cost UAS, reducing the need for manual measurements and increasing precision and temporal resolution in plant breeding programs.

Why it matches plant phenotyping methodsUAS画像・LiDARによるテフの草高と倒伏程度の推定ワークフローを開発・比較し、育種での測定精度向上を示す中心的な表現型計測研究。

abstractHere we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event.

Classification of coffee leaf nutrient deficiencies using hybrid feature aggregation with hierarchical localized attention and MobileNet. →

Objectives Nutritional deficiency in coffee is a major problem that compromises plant health, crop yield, and bean quality, directly threatening the economies of coffee-dependent regions. Traditional detection methods are primarily manual, time-consuming, and relied upon expert availability. Methods This study introduces a novel Deep Learning (DL)-based dual-track architecture designed for the efficient classification of nutritional deficiencies in coffee leaf. The first track utilizes a MobileNetV3 backbone integrated with a Multi-Convolutional Shape-Aware Kernel (MCSK) block to capture spatially adaptive features from leaf textures and vein patterns. The second track employs a Hierarchical Shuffled Group Attention Network (HSGAN), utilizing Efficient Channel Attention (ECA) and Local Group Attention (LGA) modules to balance fine-grained local variations with broad spatial dependencies. Finally, a Multidimensional Collaborative Attention (MCA) mechanism is applied to the fused features to enhance cross-channel interactions and feature extraction. Results The proposed model was evaluated using the CoLeaf dataset, where it achieved an accuracy score of 96.04%. This performance demonstrates an improvement over existing research and current state-of-the-art models, highlighting the architecture's ability to identify complex nutrient-related patterns in coffee leaves. Conclusion The performance of the proposed DL approach offer a solution for the automated monitoring of coffee plants. By providing a reliable alternative to manual inspection, this method presents the potential to help coffee production and support the agricultural regions worldwide.

Why it matches plant phenotyping methodsコーヒー葉の栄養欠乏という植物状態を画像から分類する深層学習手法を開発・評価しており、表現型取得・推定が研究の中心であるため。

abstractThis study introduces a novel Deep Learning (DL)-based dual-track architecture designed for the efficient classification of nutritional deficiencies in coffee leaf.

AI-Powered Yield Prediction, Bacterial Blight and Crop Health Classification in Common Bean (Phaseolus vulgaris L.) Using Drone RGB and Multispectral Imaging →

Phenotyping plant traits using UAV-based multispectral imaging offers a robust and unbiased approach to assessing crop status. With approximately 70% of smallholder farmers in East and Southern Africa cultivating common beans as a key source of food and income, there is a critical need for accurate and timely measurements of crop health and yield to support data-driven management decisions and disease mitigation. Traditional phenotyping methods are labor-intensive, and existing remote sensing and machine learning approaches remain limited. This study presents a comprehensive framework for plot-level assessment of common bean health and yield using time-series RGB and multispectral imagery. Data collected over three growing seasons (2022–2024) were used to extract canopy variables and vegetation indices (VIs) across phenological stages. For yield prediction, traditional machine learning models achieved a root mean squared error (RMSE) of 242.33 kg ha⁻¹ and an R² of 0.66 using an Extra Trees Regressor. A novel BY-GRU architecture improved performance, achieving an RMSE of 242.40 kg ha⁻¹ and an R² of 0.79. The analysis also identified 45–60 days after sowing as the optimal window for prediction. To address limitations in conventional plant health assessments, this study introduces a novel Health Index. Comparative analysis demonstrated its robustness across genotypes and stronger correlation with yield. Machine learning and deep learning models, including MaxViT, were applied to estimate the Health Index, achieving improved predictive performance. Overall, this work integrates UAV sensing and modelling to provide scalable tools for phenomics, crop management, and breeding.

Why it matches plant phenotyping methodsUAVのRGB・マルチスペクトル画像から作物の健康状態、収量、キャノピー形質を推定するセンシング・機械学習フレームワークが研究の中心であり、植物フェノタイピング手法として適格です。

abstractThis study presents a comprehensive framework for plot-level assessment of common bean health and yield using time-series RGB and multispectral imagery.

Digital morphological data can generate accurate pre-emergence herbicide dose-response curves in Chenopodium album L. →

Introduction Herbicide dose-response assays are routinely implemented to compare herbicide resistance among weed biotypes, which requires plant biomass to estimate the dose that reduces growth by 50% relative to untreated plants (GR 50 ). The Phenospex TraitFinder is a high-throughput, non-destructive, digital phenotyping system that collects data from 7 spectral parameters and 13 morphological parameters, including Digital Biomass (DB), which offers the opportunity for researchers to eliminate the time and labor associated with manual biomass collection. However, DB is the product of 3D Leaf Area and Plant Height (PH) Mean, making it a measurement of plant volume and an indirect indicator of biomass. While DB is highly correlated with true biomass, digitally collected plant volume data has not been implemented for dose-response assays or assessed for accuracy relative to true biomass data. Additionally, inaccurate PH measurements could impact the accuracy of DB measurements. Methods This study sought to assess the accuracy and utility of DB and the 19 remaining parameters in dose-response assays by comparing dose-response curves and GR 50 estimates generated from digital data and fresh biomass (FB) data. Accuracy of PH measurements were also assessed by comparing digital and manual measurements with the paired t-test. Pre-emergence dose-response assays using fomesafen and atrazine were implemented with common lambsquarters ( Chenopodium album L.). At 21 days after treatment, manual measurements of FB and PH were collected following digital data collection. Results Consistently strong correlations ( r = 0.97, P < 0.05) were observed between digitally collected data and their equivalent manual measurements. Comparisons of the dose-response curves indicated that only 3D Leaf Area, DB, Convex Hull Area, Projected Leaf Area, and Voxel Volume Total generated highly similar curves and GR 50 estimates relative to FB data, indicating that any one or all of these parameters could be utilized instead of FB. Small differences (approximately 1.06 to 1.77 mm) between manual and digital PH measurements were identified with the paired t-test, but since DB consistently produced similar dose-response curves and GR 50 estimates relative to FB, these differences did not impact the accuracy of DB measurements. Discussion Without requiring manual biomass collection, turnaround time for dose-response and other phenotyping assays decreases and allows faster sharing of research. Furthermore, herbicide-resistant plants can be preserved for phenotyping at later growth stages, tissue collection, and to produce progeny for future experiments.

Why it matches plant phenotyping methodsデジタル表現型システムで植物体積・草丈などを取得し、手作業の生体重測定との精度比較および除草剤用量反応曲線への有用性を検証しており、表現型取得法が中心です。

abstractThe Phenospex TraitFinder is a high-throughput, non-destructive, digital phenotyping system that collects data from 7 spectral parameters and 13 morphological parameters

Frost damage segmentation in grapevine organs using YOLOv11s with ASPP and dynamic confidence thresholding. →

Climate change, particularly increasing frequency and intensity of spring frost events, poses a serious threat to viticulture by reducing yield and product quality. This study proposes an image processing and machine learning-based framework for early, rapid, and accurate segmentation of frost damage in vineyards using YOLOv11s enhanced with Atrous Spatial Pyramid Pooling (ASPP). A unique dataset called FGVL dataset from Sultana seedless grape vineyards in Manisa, Türkiye, following a severe frost event in April 2025. FGVL includes 418 frost-damaged grapes, 510 frost-damaged leaves, 395 healthy grapes, and 698 healthy leaves, all manually annotated by experts under natural field conditions. By integrating ASPP into YOLOv11s, proposed model improved multi-scale contextual feature extraction and achieved mAP@50 of 0.7686, demonstrating stronger performance in instance segmentation of small, overlapping, and visually similar grapevine organs. In addition, Dynamic Confidence Thresholding (DCT) strategy was introduced to improve prediction reliability in dense and visually complex vineyard scenes. Despite challenges such as background clutter, object overlap, and small target structures, model maintained stable performance with low computational demand, requiring only 6.45 GB of GPU memory. Proposed framework offers an accurate, efficient, and practically deployable early recognition system for frost damage assessment in viticulture.

Why it matches plant phenotyping methodsブドウの器官における霜害状態を画像からセグメンテーションする手法を開発・評価しており、植物の病害・障害状態の取得が研究の中心である。

abstractThis study proposes an image processing and machine learning-based framework for early, rapid, and accurate segmentation of frost damage in vineyards using YOLOv11s enhanced with Atrous Spatial Pyramid Pooling (ASPP).

Drone-based assessment of multifunctionality in mixed cropping systems →

Abstract Modern agriculture faces the dual challenge of sustainably increasing food production while mitigating the environmental impact of intensive monocultures. Mixed cropping, which is the cultivation of multiple species or varieties, may provide ecological benefits that address productivity and environmental sustainability challenges. However, evaluating its multifunctionality in conventional agricultural field experiments is costly and labour-intensive, and small sample sizes and high spatial variability often make it difficult to detect the statistical significance of mixed cropping effects. This study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs) to efficiently assess the multifunctionality of mixed cropping systems. We conducted a field experiment comparing monocultures of oat, rye, and barley; intraspecific mixed cropping combining three oat varieties; and interspecific mixed cropping combining oat, rye, and barley. Using UAV-derived data across the entire field, including vegetation cover, plant height, and the normalised difference vegetation index, we evaluated five multifunctionalities (biomass production, spatial variability in biomass production, early canopy closure, lodging resistance, and lodging resilience). This framework reveals that mixed cropping outperforms monocropping in several key ecological functions. The proposed UAV-based HTP approach enables cost-effective, robust, and scalable evaluation of mixed cropping systems, facilitating their optimisation for multifunctionality and contributing to the advancement of sustainable agriculture.

Why it matches plant phenotyping methodsUAV画像を用いた高スループット圃場フェノタイピング枠組みを導入・検証し、植生被覆、草丈、NDVIから複数の植物形質・状態を抽出しており、フェノタイピング手法が中心的です。

abstractThis study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs)

An AI-Driven Precision Irrigation Framework for Enhanced Water Efficiency in Iraqi Agriculture →

Abstract The global issue of water scarcity and climate change requires highly efficient and intelligent irrigation systems that are capable of optimizing water consumption with high crop productivity. The paper aims to provide a holistic machine learning framework for crop water stress prediction and efficient irrigation scheduling using multi-parametric agronomic data. The paper analyzes 55,450 soybean data with 13 physiological and biochemical parameters to implement and compare six regression models for predicting the water stress index. After eliminating tautology by removing the direct water content parameter from the prediction model, LightGBM and XGBoost ensemble tree models achieved near-perfect accuracy for predicting crop water stress using regular plant parameters alone, with R² = 1.0 and RMSE = 1.57×10⁻⁸ to 5.04×10⁻⁵. The Random Forest classifier, which was implemented without any direct stress indicators, achieved perfect discrimination between low, moderate, and high stress classes with precision/recall equal to 1.0, and 5-fold cross-validation and noise tests confirmed its robustness. SHAP analysis of the results showed protein percentage (PPE) and seed yield per unit area (SYUA) to be key drivers of water stress, providing valuable insights for precision agriculture. The model for determining irrigation requirements based on crop evapotranspiration and stress level achieved R² = 1.0 with zero error, making it possible to translate trait values directly into irrigation requirements. The framework presented in this paper brings together machine learning and agronomic knowledge to provide real-time data-driven solutions for irrigation systems, which have 30–50% water savings potential while maintaining healthy crops. It lays the ground for the development of AI-assisted irrigation systems that are applicable to different crops and climatic conditions, particularly in water-scarce countries such as Iraq.

Why it matches plant phenotyping methods作物の水ストレス状態を生理・農学データから機械学習で推定し、複数モデルの比較、交差検証、ノイズ試験、解釈分析まで行う計算的フェノタイピング手法が中心である。灌漑最適化への応用を含むが、単なる日常的測定ではない。

abstractThe paper aims to provide a holistic machine learning framework for crop water stress prediction and efficient irrigation scheduling using multi-parametric agronomic data.

Computational method to analyze linear developmental gradients reveals specific metabolite enrichment patterns in stress-tolerant maize. →

Metabolic processes are essential for regulating and maintaining developmental transitions. However, the distinct metabolite-driven mechanisms that are crucial for development remain poorly characterized due to inherent challenges in measuring their localization and function in situ. We applied desorption electrospray ionization mass spectrometry imaging (DESI-MSI) to generate near single-cell resolution (50-80 µm) images of metabolites in the maize root tip, which has a well-characterized longitudinal developmental gradient. We developed a new computational tool, called Developmental Imaging Mass Spectrometry Pipeline for Linear Evaluation (DIMPLE), which processes mass signatures along linear gradients and clusters metabolites based on their developmental enrichment patterns. We employed this method to compare developmental enrichment of metabolites in Oaxacan Green, a salt-resilient maize variety, to B73, which is salt sensitive. DIMPLE uncovers specific differences in individual mass signatures and overall enrichment patterns between these varieties. Further characterization of these differences revealed meristem enrichment of D-erythrose, a metabolite that can improve stress tolerance in maize. Overall, DIMPLE enables comprehensive and rapid analysis of metabolite patterns along a linear gradient, informing biological hypotheses related to plant growth and stress response.

Why it matches plant phenotyping methods植物根端の発達勾配に沿った代謝物分布を画像化・解析する計算ツールを開発しており、植物の発達状態やストレス応答に関わる表現型抽出が研究の中心である。

abstractWe developed a new computational tool, called Developmental Imaging Mass Spectrometry Pipeline for Linear Evaluation (DIMPLE), which processes mass signatures along linear gradients and clusters metabolites based on their developmental enrichment patterns.

An artificial neural network-based deep learning model to predict combined stress impact and interaction in plants. →

Premise Plants are frequently exposed to combinations of abiotic and biotic stresses that pose a greater threat to yield and productivity than individual stresses. However, knowledge of the impact of many stress combinations in numerous plants is limited due to the lack of experimental data, which could take decades to generate. To overcome this limitation, we utilized existing literature data from various plant species and stress combinations to derive biological inferences, thereby gaining a comprehensive understanding of plant responses through a computational tool. Methods Public databases were used to gather literature on the impact of various abiotic and biotic stress combinations. Then, a composite artificial neural network (ANN)-based multi-target classification and regression deep learning model was developed using machine learning algorithms. Results The model predicted the impact of stress interactions in plants, including the morphological parameters affected and percentage changes in those parameters, with an overall accuracy of 76.33%. Predicted reductions in yield were validated in rice under combined drought and heat stress. Discussion The ANN-based model developed in this study is a valuable resource for plant researchers seeking to understand the impact of stress combinations. The tool can make use of multivariate and complex combined stress datasets.

Why it matches plant phenotyping methods植物のストレス応答として形態形質や収量変化を予測するANNベースの計算ツールを開発し、イネで予測を検証しており、表現型推定が中心である。

abstracta composite artificial neural network (ANN)-based multi-target classification and regression deep learning model was developed using machine learning algorithms

Spectral Phenotyping Reveals Time-Specific QTLs in Field-Grown Lettuce →

Lettuce ( Lactuca sativa ) is an important field crop, but our understanding of its phenotypic variation and underlying genetics under natural field conditions remains limited, posing challenges for identifying effective crop breeding targets. Longitudinal hyperspectral phenotyping allows for non-invasive monitoring of crop performance under diverse agricultural conditions. In this study, we used hyperspectral imaging to assess the phenotypic variation of almost 200 different field-grown lettuce varieties, following the same plants from just after seedling- to flowering-stage. With automated image processing, we extracted a wide range of spectral phenotypes related to metabolite content, growth efficiency, and environmental stress responses, creating a multi-dimensional time-resolved data set. Principal component analysis (PCA) revealed the major axes of spectral variation over time, and highlighted differences in spectral patterns among lettuce genotypes. Integrating on-site weather data, we modelled G×E interactions of reflectance, revealing regions of the lettuce vegetation spectrum that are primarily shaped by genotype and/or environment. We estimated phenotypic plasticity in response to time, temperature and rainfall using best linear unbiased predictions (BLUPs), capturing genotype-specific developmental trajectories and responses to the environment. We used genome-wide association studies (GWAS) to identify quantitative trait loci (QTLs) of PC-based, single and BLUP-based phenotypes, disentangling the genetic architecture of spectral lettuce phenotypes from major axes of variation down to single wavelength spectral plasticity. These findings provide new insights into the genome-wide genetic regulation and dynamics of spectral phenotypes in field grown lettuce.

Why it matches plant phenotyping methods圃場レタスを対象に、縦断ハイパースペクトル画像と自動画像処理でスペクトル形質を抽出するフェノタイピング手法・データセットが研究の中心である。

abstractLongitudinal hyperspectral phenotyping allows for non-invasive monitoring of crop performance under diverse agricultural conditions.

Sun-induced fluorescence responses to structural and physiological effects caused by the Cercospora leaf spot in sugar beet →

Sun-induced fluorescence (SIF) has emerged as a promising tool for tracking photosynthetic dynamics, yet its application in monitoring biotic stress remains underexplored in field conditions. In this study, we investigated the effects of Cercospora leaf spot (CLS), a destructive foliar disease of sugar beet (Beta vulgaris L.), for which traditional monitoring methods often fail to capture subtle disease effects or distinguish between structural and physiological stress responses. CLS infection was induced through artificial inoculation and manually scored. Canopy-level reflectance indices were acquired along with red and far-red passive SIF signals and active PSII efficiency traits using FloX and LIFT sensors mounted on an automated high-throughput phenotyping platform. The results demonstrate that SIF effectively detects CLS in sugar beet, with responses comparable with structural and disease- specific indices. Despite visible symptoms, PSII efficiency (Fq'/Fm') remained stable across treatments, indicating limited impairment of leaf photosynthetic efficiency at early stages. However, the canopy-level electron transport rate varied significantly and showed a strong relationship with red and far-red SIF, suggesting that CLS primarily affects canopy light absorption and utilization. After structural normalization, SIF yield remained largely unchanged, confirming that observed SIF reductions were mainly driven by canopy structural alterations. Overall the study demonstrates the effectiveness of SIF for large-scale disease monitoring and integration into high-throughput phenotyping, while also revealing structural and physiological factors influencing the SIF signal under disease stress.

Why it matches plant phenotyping methodsSIFおよびPSIIセンサーを搭載したハイスループット表現型解析プラットフォームで、サトウダイコンの病害状態と構造・生理応答を評価する手法の実質的な適用・検証が中心である。

abstractCanopy-level reflectance indices were acquired along with red and far-red passive SIF signals and active PSII efficiency traits using FloX and LIFT sensors mounted on an automated high-throughput phenotyping platform.

Significant increase in root exudation of 2'-deoxymugineic acid (DMA) as a response to zinc deficiency in rice →

1 Summary Zinc (Zn) deficiency limits rice productivity and poses a risk to human health, particularly in populations reliant on rice-based diets. Although rice germplasm exhibits wide variation in Zn-deficiency tolerance, the underlying physiological mechanisms remain poorly resolved. Evidence across the literature for Zn-deficiency–induced secretion of 2′-deoxymugineic acid (DMA) is inconsistent. This study clarifies the role of DMA secretion as a Zn-deficiency stress response. We developed and validated a sensitive LC–ESI–Q–TOF–MS method for selective detection of DMA in rice root exudates. Five rice genotypes with contrasting Zn-deficiency tolerance were grown hydroponically and DMA secretion measured. Zn-deficiency increased DMA exudation across all genotypes, with sensitive genotypes also showing higher secretion compared with control, supporting DMA’s role as a general response to Zn stress rather than being restricted to efficient genotypes. Fold-change responses exceeded previous studies, likely due to more severe stress exposure. Our results confirm that DMA secretion is induced under Zn-deficiency in rice as part of the micronutrient stress response. However, the lack of increased Zn uptake indicates that additional tolerance mechanisms are involved. These findings reconcile inconsistencies in the literature and position DMA secretion as an important, but not exclusive, component of Zn-deficiency adaptation in rice.

Why it matches plant phenotyping methodsイネ根滲出液中のDMAを選択的に検出するLC–MS法を開発・検証し、亜鉛欠乏応答という植物生理状態を測定しているため、化学分析が単なる付随測定ではなく中心的な方法貢献である。

abstractWe developed and validated a sensitive LC–ESI–Q–TOF–MS method for selective detection of DMA in rice root exudates.

High-Throughput Phenotyping for Revealing Key Morpho-Physiological Traits for Drought Tolerance in Pea (Pisum sativum and Wild Relatives). →

Pea (Pisum sativum) production is challenged by drought stress. Traditional methods for assessing drought tolerance are limited, and high-throughput phenotyping (HTP) can facilitate the rapid and automated assessment of plant traits. Herein, 180 Pisum spp. accessions were evaluated using an indoor HTP platform under two irrigation treatments, control (70% field capacity) and drought stress (30% field capacity), for 50 days. A combination of digital phenotyping via imaging and manual measurements was used to analyse biomass-related, architectural, and physiological traits. Drought conditions resulted in significant reductions in biomass-related traits including fresh weight (47%), total leaf area (43%), and dry weight (41%). In contrast, PSII photochemical efficiency, leaf weight ratio, and solidity showed negative sensitivity index values (ranging from -7% to -1%), indicating comparatively lower sensitivity to drought and suggesting relative stability of these traits under water-limited conditions. The high heritability value for water use efficiency (0.87) suggests that this parameter may be useful for distinguishing pea's responses to suboptimal soil moisture levels. Principal component analysis (PCA) highlighted patterns of trait variation and associations among biomass-related traits, such as fresh weight, dry weight, and leaf area, which were sensitive to drought conditions. This suggests that the plants may use a combination of strategies to cope with water limitations. Furthermore, studying the significant variation in drought response among the diverse Pisum species and subspecies revealed distinct adaptation strategies. These findings support the development of crops that are resilient to the negative effects of climate change.

Why it matches plant phenotyping methods屋内HTPプラットフォームと画像ベースのデジタルフェノタイピングを用いて、多数アクセッションの形態・生理形質を取得・解析しており、フェノタイピング手法の実質的な適用が研究の中心です。

abstracthigh-throughput phenotyping (HTP) can facilitate the rapid and automated assessment of plant traits

Design and implementation of a deep learning framework for automated crop classification and health diagnosis in precision agriculture. →

This paper presents a three-phase deep learning framework comprising (i) multi-modal data acquisition from drones and satellites, (ii) standardized pre-processing including interpolation for missing temporal data, and (iii) CNN-based feature extraction for real-time health classification. This framework relies on a mathematical model based on neural networks that classifies and detects the condition of agriculture, removing the reliance on manual tasks and subjective diagnosis. This paper focuses on three main aspects of our framework: data acquisition, training and prediction. Data is collected using sensors like drones, cameras, and satellite imagery and is pre-processed to filter out noise and improve quality. The training part uses CNN to learn features from the data and become more meaningful. The prediction part of the task classifies, and diagnoses crop health through the trained model using the features. The framework accuracy for crops such as maize, potato, and wheat has been tested and yielded over 90% accuracy. The novelty of this work resides in the development of a multi-modal deep learning architecture that fuses macro-scale satellite imagery with micro-scale drone and IoT sensor data to improve diagnostic reliability. The framework was validated on a multi-source agricultural dataset using a 70% training, 15% validation, and 15% testing protocol. Experimental results demonstrate an accuracy exceeding 90% for staple crops. Using this framework can increase the visibility and quality of information maintained for crop health and improve the decision-making routine of farmers in real time. Additionally, automation of this process can significantly reduce labor costs and increase productivity per crop. Implementing this framework can contribute to precision agriculture and sustainable management practices.

Why it matches plant phenotyping methods作物の健康状態を植物の表現型・状態として推定するマルチモーダル画像・センサ基盤と深層学習手法を開発し、複数作物・データセットで検証しているため、方法が中心である。

abstractThis paper presents a three-phase deep learning framework comprising (i) multi-modal data acquisition from drones and satellites, (ii) standardized pre-processing including interpolation for missing temporal data, and (iii) CNN-based feature extraction for real-time health classification.

Contrasting Root System Architecture Development and Response to High Temperature in an Aegilops tauschii-Derived Wheat Line and its Recurrent Parent →

The Multiple Synthetic Derivatives (MSD) population is a unique hexaploid wheat resource that captures extensive genetic diversity from Aegilops tauschii and exhibits wide variation in agronomic traits. However, root system architecture (RSA), a key determinant of resource acquisition and stress adaptation, remains poorly characterized in this population. Here, we established a practical phenotyping framework for RSA analysis and evaluated MSD417 as a representative genotype. A two-dimensional cultivation platform enabling continuous imaging of seedling root growth under controlled conditions was established to quantify RSA traits and their responses to high temperatures. MSD417 was compared with its recurrent parent, Norin 61 (N61). Under controlled conditions, MSD417 displayed greater total root length, root system width, and convex hull area than N61, indicating enhanced early root vigor. This genotype also exhibited a wider seminal root angle, suggesting improved horizontal soil exploration while maintaining root depth. High-temperature treatment reduced overall root growth and minimized genotypic differences, indicating that temperature stress constrains RSA expression. Microscopic observations further revealed a lower height-to-width ratio of coleorhiza tissue of MSD417, suggesting restricted downward expansion. Collectively, this study establishes a practical framework for RSA phenotyping and demonstrates the potential of Aegilops tauschii-derived germplasm to enhance wheat root-related adaptive traits.

Why it matches plant phenotyping methods根系構造を連続画像化して定量する2次元表現型解析プラットフォームを構築し、RSA形質の測定に実質的に適用しているため、方法が中心的である。

abstractHere, we established a practical phenotyping framework for RSA analysis and evaluated MSD417 as a representative genotype.

FIP 1.0 soybean data: Insights on soybean growth from eight years of high-throughput image field phenotyping →

Abstract Soybean growth is determined by the interaction of genetic, environmental, and management factors. In the context of future climate and climate extremes, understanding genotype by environment interaction (GxE) will be crucial for selecting resilient breeding lines and optimizing management practices to minimize stress. This requires an in depth elucidation of stressful weather conditions and differing temporal responses of genotypes to those conditions. In field studies, however, the environment is often treated as a static factor, and the specific effects of weather variability on crop growth remain poorly understood. Here, we present a longitudinal dataset comprising 17,247 high-resolution RGB images of soybean breeding lines collected throughout eight years in Eschikon, Switzerland. Top-of-canopy images were acquired throughout the entire growing seasons and complemented by hourly weather data, enabling a comprehensive analysis of soybean growth dynamics under varying field conditions. High spatio-temporal image resolution allows detailed analysis of growth dynamics and GxE, supporting identification of stress-tolerant genotypes to improve yield prediction and yield stability.

Why it matches plant phenotyping methods8年間の高スループット画像フェノタイピングによる大規模データセットを提示し、画像取得基盤と作物成長動態の解析を中心に扱っているため、方法論文として適格です。

titleFIP 1.0 soybean data: Insights on soybean growth from eight years of high-throughput image field phenotyping

Microfluidic Interrogation of Chitin-Induced Calcium Oscillations in the Moss Physcomitrium patens . →

Plants defend against pathogens such as fungi by initiating coordinated structural and chemical responses. Pathogen perception triggers rapid cytosolic calcium influx and calcium oscillations that drive defense gene expression, yet the mechanisms by which these signals encode stressor intensity and propagate systematically remain unclear. Here, we present a microfluidic system to characterize intracellular calcium dynamics in protonemal colonies of the moss Physcomitrium patens (Hedw.) upon precise and reversible exposure to fungal chitin oligosaccharides. Epifluorescent imaging of cells expressing the calcium indicator GCaMP6f revealed a rapid, coordinated calcium response to chitin addition, followed by stereotyped oscillations that subsided quickly upon stimulus removal. We implemented an unbiased image segmentation algorithm using pixel-based k -means clustering to automatically locate regions with specific oscillatory signatures. Calcium dynamics were distinct across adjacent cells, distinguishable by cell type, and significantly modulated by circadian rhythm, adaptation time within the device, and stimulus timing. Cytosolic calcium oscillations, which rose and fell symmetrically within about 60 s, occurred spontaneously during the subjective night and following short adaptation periods. Chitin elicited strong oscillations with increased frequency, amplitude, and duration, and repeated pulses entrained regular, colony-wide oscillations at the stimulation interval. This study complements prior investigations of whole plant and growth tip dynamics and provides a quantitative framework to study calcium signaling in plants, including mechanisms of signal propagation and the role of oscillation frequency on gene expression.

Why it matches plant phenotyping methods植物細胞のカルシウム動態を定量するマイクロ流体・蛍光イメージング系と自動画像セグメンテーションを開発し、植物の生理状態を抽出する方法が研究の中心である。

abstractHere, we present a microfluidic system to characterize intracellular calcium dynamics in protonemal colonies of the moss Physcomitrium patens

Introducing Concurrent Imaging and Unidimensional Analytics for Plant Stress Responses. →

Advancements in phenotyping technologies, including object imaging, high-throughput monitoring, and soft computing, are pivotal for understanding plant responses to environmental stresses. These technologies enable detailed analyses of morphological, physiological, and structural adaptations under abiotic and biotic stresses, such as drought. Current work using multimodal and multi-perspective image processing methods can capture the essential processes that enhance plant resilience and counteract stress by identifying morphological and biochemical indicators. However, the dynamic and complex nature of plant responses poses multiple challenges for generating precise analytics and descriptors of evolving phenotypes. This work introduces analytics for concurrent imaging, adopting the underlying principle of cosegmentation to create taxonomies for new phenotypes. Here, unidimensional refers to the concurrent analysis of multiple images within a single phenotyping dimension: temporal, modal, or perspective, rather than combining information across dimensions. The proposed unidimensional phenotypes integrate concurrent images within individual temporal, modal, or perspective dimensions to capture dynamic morphological and physiological responses that are not observable with conventional single-image or cumulative metrics. Within a high-throughput imagery production system, these phenotypes enable more nuanced quantification of phenotypic changes, leveraging the strengths of simultaneous image analysis to enhance insight into plant adaptations. This workflow aligns with the investigation of plants’ adaptive strategies under abiotic stress and provides quantitative indicators of plant health under adverse environmental conditions.

Why it matches plant phenotyping methods植物の同時画像解析とコセグメンテーションに基づく新しい表現型抽出・定量化ワークフローを提案しており、植物フェノタイピング手法が中心である。

abstractThis work introduces analytics for concurrent imaging, adopting the underlying principle of cosegmentation to create taxonomies for new phenotypes.

Overcoming difficulties in segmentation of hyperspectral plant images with small projection areas using machine learning. →

Segmentation of hyperspectral image data is a well-established technique in remote sensing. While it is commonly applied to individual field crops, its use for individual trees is less prevalent. Conifers are crucial in forestry, and assessing physiological status, or genetic diversity is required for effective early-age treatment in nurseries and hyperspectral imaging (HSI) combined with high-throughput phenotyping (HTP) offers faster and non-destructive evaluation. NDVI-based thresholding is sufficient for detection of leaves with large projection areas, but needles of conifers present challenges due to spatial resolution constraints and increased proportion of border pixels. This study monitored the offspring of three locally adapted Scots pine (Pinus sylvestris L.) populations, representing distinct upland and lowland ecotypes. This study presents a hyperspectral image processing pipeline for segmenting and isolating individual Scots pine seedlings. Using a K-means algorithm, 23 hyperspectral centroids were successfully derived and subsequently classified into ten biologically distinct groups. Random forest classification model effectively differentiated Scots pine seedlings based on origin during water stress and recovery periods. This study highlights the potential of hyperspectral imaging and machine learning in evaluating the physiological state of conifer seedlings, demonstrating promising applications in forest tree physiology research and tree breeding.

Why it matches plant phenotyping methods個体のマツ苗を分離・セグメンテーションするハイパースペクトル画像処理パイプラインを開発し、機械学習で生理状態や由来を評価しており、表現型取得手法が中心である。

abstractThis study presents a hyperspectral image processing pipeline for segmenting and isolating individual Scots pine seedlings.

Phenotypic differentiation between highland and coastal quinoa under cold stress conditions →

Quinoa ( Chenopodium quinoa Willd.) is a genetically diverse Andean crop valued for its nutrition and adaptability to varied agro-climatic conditions with potential for cultivation in European and Mediterranean, particularly on marginal lands. Low temperatures during early sowing can impair germination, while delayed sowing increases the risk of poor maturation due to unfavorable autumn weather. To assess the adaptation of quinoa to low temperature conditions, that reflect cold stress, we evaluated germination and phenotypic variation in 60 accessions from highland and coastal ecotypes across three sowing dates in South-Western Germany: late winter (S1), early spring (S2), and spring (S3). Early sowing under low temperature conditions in S1 delayed seedling-emergence and reduced emergence percentages, yet these plants produced the highest average seed yield per plot (64 g) compared to S2 (46 g) and S3 (35 g). Highland accessions showed earlier seedling-emergence and with higher emergence percentages, while coastal types matured earlier and gave higher yields across sowing dates. A complementary laboratory experiment assessed germination under cold (4.4 °C) and control (18.3 °C) conditions, using both manual scoring and image analysis via a Mask R Convolutional Neural Network, to track seedling growth. This confirmed the beneficial germination performance of highland accessions under low temperature conditions, with strong agreement between manual and automated scoring. Our findings suggest that quinoa demonstrates resilience to cold stress with highland quinoa exhibiting superior germination traits, and early sowing, despite reduced emergence, can lead to higher yields. We conclude that combining favorable traits such as faster maturity and higher yield of coastal ecotypes with superior germination traits of highland accessions is a promising avenue for breeding improved quinoa varieties for cold climatic regions.

Why it matches plant phenotyping methodsMask R-CNNによる発芽・幼植物成長の画像解析を手動評価と比較し、強い一致を検証しており、植物表現型取得法の技術的検証を含む。

abstractA complementary laboratory experiment assessed germination under cold (4.4 °C) and control (18.3 °C) conditions, using both manual scoring and image analysis via a Mask R Convolutional Neural Network, to track seedling growth.

MAcro Plant Projection Imaging (MAPPI): An open, scalable platform for whole-plant fluorescence real-time imaging →

Understanding how plants perceive and respond to environmental and developmental cues requires tools capable of monitoring molecular signals in vivo, across whole tissues, and in real time. Genetically encoded fluorescent indicators, coupled with fluorescence microscopy, have transformed plant biology, but their application remains largely confined to small model organisms and specialized microscopy instrumentation. Here, we present MAcro Plant Projection Imaging (MAPPI), an open-source, low-cost, and modular fluorescence imaging platform for soil-grown plants beyond the model organism or seedling stage. MAPPI enables wide field-of-view, dual-projection imaging of fluorescent reporters, supporting real-time visualization of systemic signals under near-physiological conditions. We validate MAPPI by tracking calcium and l -glutamate dynamics in adult Nicotiana benthamiana plants, revealing developmentally regulated long-distance calcium waves triggered by wounding, burning, or submergence, including bidirectional shoot-to-root and root-to-shoot signaling. By democratizing access to whole-plant functional imaging, MAPPI provides a scalable tool for dissecting signal propagation, stress adaptation, and systemic communication in both model and nonmodel species.

Why it matches plant phenotyping methods植物全体の蛍光シグナルをリアルタイム取得する低コスト・オープンな画像プラットフォームを開発し、成体植物で検証しているため、植物表現型取得法が研究の中心です。

abstractHere, we present MAcro Plant Projection Imaging (MAPPI), an open-source, low-cost, and modular fluorescence imaging platform for soil-grown plants beyond the model organism or seedling stage.

Stem microanatomical phenomic uncovers a potential role for ZmLSM2 in regulating maize stem bending strength. →

Modern maize stems possess a well-developed vascular bundle system, which is critical for providing mechanical support and lodging resistance. However, characterization of the microanatomical features of vascular bundles and their functional implications in stem mechanics remains challenging, primarily due to technical limitations in high-throughput microanatomical analysis of stem tissues. We thus constructed data sets consisting of over 500,000 maize stem CT images from a maize diversity panel of 383 inbred lines. We evaluated 32 microanatomical phenotypes of maize basal internodes across two environments in different years. By incorporating engineering mechanics parameters, we calculated novel characteristics of the vascular bundles, including the moment of area (MOA) and the polar moment of inertia (PMOI). Through the high-density phenotypic data set, we identified multiple stem microanatomical phenotypes strongly associated with lodging resistance, particularly of vascular bundle mechanical traits. By integrating population genetic profiling, we discovered and confirmed that ZmLSM2 (U6 small nuclear ribonucleoprotein specific Sm-like 2) serves as a key regulator of stem mechanical strength, might function in RNA processing and maturation within vascular stem cells, identifying novel genetic targets for improving maize lodging resistance. This approach demonstrates the value of combining advanced phenotyping with multi-omics analyses for crop improvement. These discoveries will deepen the understanding of plant stem biomechanical principles and provide novel targets for enhancing lodging resistance in crop breeding programs.

Why it matches plant phenotyping methodsトウモロコシ茎のCT画像から微細構造形質を高スループットに抽出する表現型解析基盤とデータセットが研究の中心であり、単なる生物学的測定ではない。

abstracttechnical limitations in high-throughput microanatomical analysis of stem tissues

3D reconstruction analysis of maize-soybean intercropping competition under water stress. →

Maize-soybean intercropping is a sustainable intensive agroecosystem, though the productivity is constrained by interspecific competition for water and light resources. To enhance the water use efficiency in this intercropping system and understand canopy structure dynamics under the water-limited conditions of arid northwest China, this study proposes a novel optimization strategy that synchronizes deficit irrigation scheduling with crop-specific water requirements during critical phenological phases. Four irrigation regimes were implemented: W1 (full irrigation for both maize and soybean crops), W2 (maize-full and soybean-deficit), W3 (maize-deficit and soybean-full), and W4 (dual deficit). Through UAV-based high-resolution 3D canopy reconstruction (R = 0.98 for plant height validation), 14 spatial-geometric descriptors were quantified. The W2 strategy demonstrated superior competitive coordination, enhancing aggressivity of maize (Ams) by 85.9 % through strategic canopy reconfiguration: 11.8 % reduction in maize maximum leaf layer width position (MLLWP), 28.3 % decrease in inter-specific canopy overlap area (COA), and 40.0 % compression of shading convex hull volume (SCHV). These optimized structural adaptations synergistically enhanced photosynthetically active radiation interception (+13.4 %) while achieving concurrent reductions in crop evapotranspiration (ET, -19.7 %) without yield penalty, thereby elevating irrigation water use efficiency (IWUE) by 14.4 % and water equivalent ratio (WER) by 15.9 %. This work provides mechanistic insights into canopy architecture-mediated resource competition mitigation and establishes a technological framework for sustainable intensification in water-limited environments.

Why it matches plant phenotyping methodsUAVによる3Dキャノピー再構成を用いた植物構造形質の取得と検証が、灌漑試験の主要な解析基盤として明示されているため、実質的なフェノタイピング手法の応用に該当する。

abstractThrough UAV-based high-resolution 3D canopy reconstruction (R = 0.98 for plant height validation), 14 spatial-geometric descriptors were quantified.

Light Sources in Hyperspectral Imaging Simultaneously Influence Object Detection Performance and Vase Life of Cut Roses. →

Hyperspectral imaging (HSI) is a noncontact camera-based technique that enables deep learning models to learn various plant conditions by detecting light reflectance under illumination. In this study, we investigated the effects of four light sources-halogen (HAL), incandescent (INC), fluorescent (FLU), and light-emitting diodes (LED)-on the quality of spectral images and the vase life (VL) of cut roses, which are vulnerable to abiotic stresses. Cut roses 'All For Love' and 'White Beauty' were used to compare cultivar-specific visible reflectance characteristics associated with contrasting petal pigmentation. HSI was performed at four time points, yielding 640 images per light source from 40 cut roses. The results revealed that the light source strongly affected both the image quality (mAP@0.5 60-80%) and VL (0-3 d) of cut roses. The HAL lamp produced high-quality spectral images across wavelengths (WL) ranging from 480 to 900 nm and yielded the highest object detection performance (ODP), reaching mAP@0.5 of 85% in 'All For Love' and 83% in 'White Beauty' with the YOLOv11x models. However, it increased petal temperature by 2.7-3 °C, thereby stimulating leaf transpiration and consequently shortening the VL of the flowers by 1-2.5 d. In contrast, INC produced unclear images with low spectral signals throughout the WL and consequently resulted in lower ODP, with mAP@0.5 of 74% and 69% in 'All For Love' and 'White Beauty', respectively. The INC only slightly increased petal temperature (1.2-1.3 °C) and shortened the VL by 1 d in the both cultivars. Although FLU and LED had only minor effects on petal temperature and VL, these illuminations generated transient spectral peaks in the WL range of 480-620 nm, resulting in decreased ODP (mAP@0.5 60-75%). Our results revealed that HAL provided reliable, high-quality spectral image data and high object detection accuracy, but simultaneously had negative effects on flower quality. Our findings suggest an alternative two-phase approach for illumination applications that uses HAL during the initial exploration of spectra corresponding to specific symptoms of interest, followed by LED for routine plant monitoring. Optimizing illumination in HSI will improve the accuracy of deep learning-based prediction and thereby contribute to the development of an automated quality sorting system that is urgently required in the cut flower industry.

Why it matches plant phenotyping methods切り花の状態評価に用いるHSIについて、照明条件が画像品質と検出精度に及ぼす影響を比較・検証し、実運用向けの照明戦略を提案しているため、植物フェノタイピング手法が中心である。

abstractwe investigated the effects of four light sources-halogen (HAL), incandescent (INC), fluorescent (FLU), and light-emitting diodes (LED)-on the quality of spectral images and the vase life (VL) of cut roses

Research on Drought Stress Detection in the Seedling Stage of Yunnan Large-Leaf Tea Plants Based on Biomimetic Vision and Chlorophyll Fluorescence Imaging Technology. →

To address the issue of drought level confusion in the detection of drought stress during the seedling stage of the Yunnan large-leaf tea variety using the traditional YOLOv13 network, this study proposes an improved version of the network, MC-YOLOv13-L, based on animal vision. With the compound eye's parallel sampling mechanism at its core, Compound-Eye Apposition Concatenation optimization is applied in both the training and inference stages. Simulating the environmental information acquisition and integration mechanism of primates' "multi-scale parallelism-global modulation-long-range integration," multi-scale linear attention is used to optimize the network. Simulating the retinal wide-field lateral inhibition and cortical selective convergence mechanisms, CMUNeXt is used to optimize the network's backbone. To further improve the localization accuracy of drought stress detection and accelerate model convergence, a dynamic attention process simulating peripheral search, saccadic focus, and central fovea refinement in primates is used. Inner-IoU is applied for targeted improvement of the loss function. The testing results from the drought stress dataset (324 original images, 4212 images after data augmentation) indicate that, in the training set, the Box Loss, Cls Loss, and DFL Loss of the MC-YOLOv13-L network decreased by 5.08%, 3.13%, and 4.85%, respectively, compared to the YOLOv13 network. In the validation set, these losses decreased by 2.82%, 7.32%, and 3.51%, respectively. On the whole, the improved MC-YOLOv13-L improves the accuracy, recall rate and mAP@50 by 4.64%, 6.93% and 4.2%, respectively, on the basis of only sacrificing 0.63 FPS. External validation results from the Laobanzhang base in Xishuangbanna, Yunnan Province, indicate that the MC-YOLOv13-L network can quickly and accurately capture the drought stress response of tea plants under mild drought conditions. This lays a solid foundation for the intelligence-driven development of the tea production sector and, to some extent, promotes the application of bio-inspired computing in complex ecosystems.

Why it matches plant phenotyping methods茶樹の干ばつストレス状態を画像から検出する改良YOLO手法を開発・検証しており、植物状態の取得・推定が研究の中心である。

abstractthis study proposes an improved version of the network, MC-YOLOv13-L, based on animal vision.

Quantifying growth and lodging in Tef ( Eragrostis tef ) with Uncrewed Aerial Systems (UAS) →

Lodging is a major contributor to decreased yield in tef, a staple cereal crop in Ethiopia. Semidwarf varieties have been developed with a goal to increase yield through reduced lodging, but studying lodging susceptibility currently requires a labor-intensive, imprecise, manual scoring method. Here we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event. We compare 3D point clouds generated by photogrammetry from RGB images with those generated from LiDAR to estimate height, demonstrating that they produce similar results, despite differences in cost. Stand height and lodging can both be accurately measured with low-cost UAS, reducing the need for manual measurements and increasing precision and temporal resolution in plant breeding programs. Significance Statement Extreme weather or heavy grain can cause plant stems to bend, a process called lodging. Lodging significantly reduces crop yields globally, particularly in grain crops such as tef ( Eragrostis tef ). Semidwarf crops have previously been reported to be lodging-resistant, increasing crop yields. Here, we used uncrewed aerial systems (UAS) to measure plant growth, height, and lodging in gene edited semidwarf tef lines, and compared the results to ground-truth data. Using a UAS equipped with a red-green-blue (RGB) camera or LiDAR sensor, we measured plant height and lodging, and found that early-season height measurements could predict future lodging potential. The tools used were contributed to the open-source software PlantCV-Geospatial for community use. This work contributes to a broader understanding of genetic resistance to lodging, providing valuable insights for tef crop improvement and reduces the need for labor-intensive manual measurements.

Why it matches plant phenotyping methodsUASのRGB画像・LiDARから3D点群を生成し、植物の草高と倒伏を定量化・検証するワークフローが研究の中心であるため、植物フェノタイピング手法として含める。

abstractHere we present workflows for analyzing tef stand height from UAS sensors across time to both predict lodging later in the season with early height and to measure the severity of lodging after a storm event.

Utilizing high‐throughput phenotyping to identify metribuzin tolerance in winter wheat →

Abstract Plant breeders and weed scientists address weed management collaboratively by selecting for herbicide tolerance in breeding programs. Metribuzin, a Group 5 PSII‐inhibiting herbicide, is labeled for use in wheat ( Triticum aestivum L.). However, application to currently available lines results in frequent, variable, and unpredictable crop injury. Breeding for enhanced metribuzin tolerance would allow growers to utilize this herbicide effectively while minimizing the risk of crop injury. Incorporating an additional herbicide mode of action in winter wheat production would enhance rotational flexibility and weed resistance management. Selection for improved herbicide tolerance in crops has traditionally relied on visual estimation, yet assessments can be variable. The objective of this study was to improve the accuracy and efficiency of selecting for herbicide tolerance in a breeding program by utilizing a drone‐mounted multispectral sensor. Multispectral data were collected on paired rows of an diversity panel and advanced generation lines grown in paired plot yield trials. Vegetation indices calculated include normalized difference vegetation index (NDVI), normalized difference red edge (NDRE), transformed chlorophyll absorption reflectance index, normalized water index, and modified triangular vegetation index. Visual assessments of injury, plant height, and grain yield were also recorded. Correlations between reflectance indices and grain yield were stronger than those between visual injury assessments and grain yield. The top 10 lines overlapped 45%–53% when selected by highest yield and highest NDVI or NDRE, respectively, in treated plots. The relationship between yield and index differences in treated and nontreated plots showed that the difference in indices (multiple R 2 = 0.0802–0.5434) explained more yield variation than visual assessments (multiple R 2 = 0.0003–0.1915). These results suggest that multispectral analysis at the plot level is a more accurate and efficient indicator of herbicide injury in winter wheat than traditional visual assessments.

Why it matches plant phenotyping methodsドローン搭載マルチスペクトルセンサーと植生指数を用いて、冬コムギの除草剤傷害・耐性を従来の目視評価より高精度かつ効率的に推定する方法を実証しており、表現型取得法が研究の中心である。

abstractThe objective of this study was to improve the accuracy and efficiency of selecting for herbicide tolerance in a breeding program by utilizing a drone‐mounted multispectral sensor.

Electrochromic polyoxometalates for sensing abiotic stress in plants. →

Introduction Understanding plant responses to abiotic stress requires an insight into plant redox activity. This study proposes a novel and cost-effective method for assessing the redox state of plants. Methods The method utilizes the electrochromic properties of polyoxometalate phosphomolybdic acid hydrate (PMA). PMA is reduced proportionally by glutathione (GSH) and ascorbic acid (AsA), which results in a measurable color change. The validity of this method was confirmed through empirical experimentation in Arabidopsis thaliana under conditions of salinity and UV radiation. Results Salinity treatments revealed a non-significant, two-phase trend in redox activity with an increase at moderate levels followed by a decrease. UVC radiation led to a substantial decrease in redox activity, indicating distress. In contrast, UVA promoted resilience, also known as eustress. Notably, UVB significantly increased redox activity, suggesting the activation of an emergency antioxidant response. Discussion A demonstrable correlation has been identified between the redox activity of plants and various stress types. This correlation facilitates the classification of responses into two distinct categories: adaptive eustress and detrimental distress. This advancement contributes to the enhancement of plant metabolic and stress tolerance evaluation.

Why it matches plant phenotyping methods植物のレドックス状態を測定する新規手法を開発し、シロイヌナズナでストレス条件下の妥当性を検証しており、表現型取得が研究の中心である。

abstractThis study proposes a novel and cost-effective method for assessing the redox state of plants.

Reinforcement learning based dynamic vegetation index formulation for rice crop stress detection using satellite and mobile imagery. →

Timely crop stress detection is essential for safeguarding yields and promoting sustainable agriculture. Traditional vegetation indices (e.g., NDVI, EVI) are widely used but remain static, crop-agnostic, and often insensitive to early stress signals. This study proposed RL-VI, a reinforcement learning-based framework that dynamically formulates vegetation indices optimized for rice stress detection. Unlike existing methods, RL-VI integrates Sentinel-2 multispectral imagery with smartphone-captured RGB data, creating the first cross-platform environment where vegetation indices are learned rather than predefined. The reinforcement learning agent adaptively selects stress-sensitive spectral band combinations guided by classification rewards. Experiments on real-world rice fields in Tamil Nadu, India, and benchmark datasets (Indian Pines, wheat salt stress) show that RL-VI achieves an overall accuracy of 89.4% and F1-score of 0.88, outperforming static and machine-learned indices by up to 12%. Importantly, RL-VI enables early stress detection up to 10 14 days before visible symptoms, providing actionable lead time for intervention. The proposed framework is computationally lightweight and scalable to UAV or edge devices, offering a farmer-ready tool for precision agriculture, bridging field-level mobile sensing with satellite monitoring for low-cost, real-time crop health management. Statistical validation using ANOVA (F = 88.24, p < 0.001) and pairwise t-tests (p < 0.001) confirmed RL-VI's superiority, while SHAP analyses emphasized the physiological significance of red-edge and SWIR bands in stress discrimination.

Why it matches plant phenotyping methods植物ストレス状態を推定する動的植生指数と強化学習フレームワークを開発し、実圃場・ベンチマークデータで性能検証しているため、フェノタイピング手法が中心である。

abstractThis study proposed RL-VI, a reinforcement learning-based framework that dynamically formulates vegetation indices optimized for rice stress detection.

Reciprocal BLUP: A Predictability-Guided Multi-Omics Framework for Plant Phenotype Prediction. →

Sustainable improvement of crop performance requires integrative approaches that link genomic variation to phenotypic expression through intermediate molecular pathways. Here, we present Reciprocal Best Linear Unbiased Prediction (Reciprocal BLUP), a predictability-guided multi-omics framework that quantifies the cross-layer relationships among the genome, metabolome, and microbiome to enhance phenotype prediction. Using a panel of 198 soybean accessions grown under well-watered and drought conditions, we first evaluated four direction-specific prediction models (genome → microbiome, genome → metabolome, metabolome → microbiome, and microbiome → metabolome) to estimate the predictability of individual omics features. We evaluated whether subsets of features with high cross-omics predictability improved phenotype prediction. These cross-layer models identify features that play physiologically meaningful roles within multi-omics systems, enabling the prioritization of variables that capture coherent biological signals enriched with phenotype-relevant information. Consequently, metabolome features were highly predictable from microbiome data, whereas microbiome predictability from metabolomic data was weaker and more environmentally dependent, revealing an asymmetric relationship between these layers. In the subsequent phenotype prediction analysis, the model incorporating predictability-based feature selection substantially outperformed models using randomly selected features and achieved prediction accuracies comparable to those of the full-feature model. Under drought conditions, the phenotype prediction models based on metabolomic or microbiomic kernels (MetBLUP or MicroBLUP) outperformed the genomic baseline (GBLUP) for several biomass-related traits, indicating that the environment-responsive omics layers captured phenotypic variations that were not explained by additive genetic effects. Our results highlight the hierarchical interactions among genomic, metabolic, and microbial systems, with the metabolome functioning as an integrative mediator linking the genotype, environment, and microbiome composition. The Reciprocal BLUP framework provides a biologically interpretable and practical approach for integrating multi-omics data, improving phenotype prediction, and guiding omics-based feature selection in plant breeding.

Why it matches plant phenotyping methods植物形質予測のための新しい多層オミクス統合フレームワークを提案し、予測モデル比較と性能評価を行っているため、計算的フェノタイピング手法が中心である。

abstractwe present Reciprocal Best Linear Unbiased Prediction (Reciprocal BLUP), a predictability-guided multi-omics framework that quantifies the cross-layer relationships among the genome, metabolome, and microbiome to enhance phenotype prediction.

Dual-Isotope (δ 2 H, δ 18 O) and Bioelement (δ 13 C, δ 15 N) Fingerprints Reveal Atmospheric and Edaphic Drought Controls in Sauvignon Blanc (Orlești, Romania). →

Grapevine water relations are increasingly influenced by drought under climate change, with significant implications for yield, fruit composition and wine quality. Stable isotopes of hydrogen, oxygen, carbon and nitrogen (δ 2 H, δ 18 O, δ 13 C and δ 15 N) provide sensitive tracers of plant water sources and physiological responses to stress. Here, we combined dual water isotopes (δ 2 H, δ 18 O), carbon and nitrogen isotopes (δ 13 C, δ 15 N), and high-resolution micrometeorological/soil observations to diagnose drought dynamics in Vitis vinifera cv. Sauvignon blanc (Orlești, Romania; 2023-2024). Dual-isotope relationships delineated progressive evaporative enrichment along the soil-plant-atmosphere continuum, with slopes LMWL ≈ 6.41 > stem ≈ 5.0 > leaf ≈ 2.2, consistent with kinetic fractionation during transpiration (leaf) superimposed on source-water signals (stem). Weekly leaf δ 18 O covaried strongly with relative humidity (RH; r = -0.69) and evapotranspiration (ET; r = +0.56), confirming atmospheric control of short-term enrichment, while stem isotopes showed buffered responses to soil water. We integrated Δ 18 O (leaf-stem), RH, ET, and soil matric potential at 60 cm (Soil 60 ) into an Isotopic Drought Index (IDI), which captured the onset, intensity, and persistence of the July-August 2024 drought (IDI 0-100 > 90; RH 40 mm wk -1 , Soil 60 > 100 cb). Carbon and nitrogen isotopes provided complementary, integrative diagnostics: δ 13 C increased (less negative) with drought (r = -0.52 with RH; +0.49 with IDI), reflecting higher intrinsic water-use efficiency, whereas δ 15 N rose with soil dryness and IDI (leaf: r ≈ +0.48 with Soil 60 ; +0.42 with IDI), indicating constraints on N acquisition and enhanced internal remobilization. Together, multi-isotope and environmental data yield a mechanistic, field-validated framework linking atmospheric demand and edaphic limitation to vine physiological and biogeochemical responses and demonstrate the operational value of an isotope-informed drought index for precision viticulture.

Why it matches plant phenotyping methods複数同位体と環境データからブドウの水分状態・干ばつ応答を推定するIsotopic Drought Indexを構築し、圃場で検証した研究であり、植物の生理状態取得手法が中心である。

abstractWe integrated Δ 18 O (leaf-stem), RH, ET, and soil matric potential at 60 cm (Soil 60 ) into an Isotopic Drought Index (IDI), which captured the onset, intensity, and persistence of the July-August 2024 drought

Genome-wide association mapping and candidate genes analysis of high-throughput image descriptors for wheat frost tolerance. →

Repeated occurrences of extreme weather events, such as low temperatures, due to global warming present a serious risk to the safety of wheat production. Quantitative assessment of frost damage can facilitate the analysis of key genetic factors related to wheat tolerance to abiotic stress. We collected 491 wheat accessions and selected four image-based descriptors (BLUE band, RED band, NDVI, and GNDVI) to quantitatively assess their frost damage. Image descriptors can complement the visual estimation of frost damage. Combined with genome-wide association study (GWAS), a total of 107 quantitative trait loci (QTL) (r 2 ranging from 0.75% to 9.48%) were identified, including the well-known frost-resistant locus Frost Resistance (FR)-A1/ Vernalization (VRN)-A1. Additionally, through quantitative gene expression data and mutation experience verification experiments, we identified two other frost tolerance candidate genes TraesCS2A03G1077800 and TraesCS5B03G1008500. Furthermore, when combined with genomic selection (GS), image-based descriptors can predict frost damage with high accuracy (r ≤ 0.84). In conclusion, our research confirms the accuracy of image-based high-throughput acquisition of frost damage, thereby supplementing the exploration of the genetic structure of frost tolerance in wheat within complex field environments.

Why it matches plant phenotyping methods小麦の霜害を画像記述子で定量評価し、その精度を検証しているため、画像ベース植物フェノタイピングが研究の中心です。

abstractselected four image-based descriptors (BLUE band, RED band, NDVI, and GNDVI) to quantitatively assess their frost damage.

Dataset on flammability and functional traits of woody plants in a pine-oak forest of western Mexico. →

Background Plant functional traits provide key information about species' ecological strategies and their responses to environmental disturbances such as fire. This dataset documents 14 morpho-functional traits of leaves (specific leaf area, leaf water content and leaf dry matter content), stems (maximum height, bark thickness, diameter at 40 cm, wood density, stem water content and stem dry matter content), one regenerative trait (resprouting capacity), as well as fire-related traits (ignition time, flaming time and flammability) and growth form in 50 woody plant species (27 trees, 22 shrubs and one liana) inhabiting a pine-oak forest in the "Barranca del Cupatitzio" National Park (BCNP), located in Uruapan, Michoacán, Mexico. This dataset is formatted according to the Darwin Core Archive standard and is publicly available for use. New information This dataset is standardised under the Darwin Core framework. It includes 14 morpho-functional and fire-related traits. The data were obtained from 50 woody species with a diameter at breast height (DBH) > 2.5 cm (27 trees, 22 shrubs and one liana), in a pine-oak forest located in the western Trans-Mexican Volcanic Belt, in the Municipality of Uruapan, Michoacán, Mexico. Here, we report flammability-related traits for these species for the first time. The collection of biological material and the measurement of functional traits followed internationally recognised protocols, ensuring methodological consistency and facilitating integration with other global datasets. The dataset includes values for flammability, ignition time, flaming time, specific leaf area, wood density, stem water and dry matter content, bark thickness, leaf water and dry matter content, maximum height, stem diameter at 40 cm above the ground, plant growth form and resprouting capacity. This information is particularly valuable for studies in functional ecology, ecological restoration, the dynamics of woody plant communities and fire management in temperate, fire-prone ecosystems.

Why it matches plant phenotyping methods植物の形態・機能・火災関連形質を体系的に収集し、Darwin Coreで標準化した再利用可能なデータセットであり、形質測定とデータ提供が中心である。

abstractThis dataset documents 14 morpho-functional traits of leaves

High-throughput plant phenotyping identifies and discriminates biotic and abiotic stresses in tomato →

In the context of precision agriculture, high-throughput phenotyping (HTP) aims to rapidly and effectively identify factors that affect crop yield, enabling timely and appropriate interventions. However, interpreting data from HTP remains challenging. We performed a proximal red-green-blue (RGB)-based HTP on several tomato genotypes exposed to abiotic stress (drought) or biotic stress induced by tomato spotted wilt virus (TSWV), Pseudopyrenochaeta lycopersici (corky root rot; CRR), or Meloidogyne incognita (root-knot nematode; RKN). We aimed to determine if RGB-based HTP is effectively able to: a) distinguish the effects of biotic from abiotic stress; b) differentiate resistant/tolerant from susceptible genotypes. Our HTP data analysis produced 12 morphometric and eight colorimetric indices. Principal Component Analysis (PCA; P ​< ​0.0001; 83 ​% variation explained by three PCs) showed that factors such as shoot area solidity and certain color-based indices, including the senescence index and green area, effectively differentiated biotic from abiotic stress. Morphometric parameters, including plant height, projected shoot area, and convex hull area, proved to be applicable for identifying the stress status regardless of the type of stress. HTP effectively distinguished the genotype resistant to TSWV from the susceptible ones. This task was more challenging for below-ground stresses like CRR and RKN. Different profiles of HTP indices were observed among the genotypes assayed for drought tolerance, indicating variability in their ability to withstand drought conditions. In conclusion, our findings highlight the value of RGB-based HTP as a tool for precision farming of tomatoes, enabling the identification of both biotic and abiotic stressors.

Why it matches plant phenotyping methodsトマトのRGBベース高スループット表現型解析を用い、形態・色彩指標の抽出と、ストレス識別および遺伝子型判別への有効性を評価しており、フェノタイピング手法が研究の中心である。

abstractWe performed a proximal red-green-blue (RGB)-based HTP on several tomato genotypes exposed to abiotic stress (drought) or biotic stress induced by tomato spotted wilt virus (TSWV), Pseudopyrenochaeta lycopersici (corky root rot; CRR), or Meloidogyne incognita (root-knot nematode; RKN).

Predicting plant stress using SAM-L: novel self-adaptive-meta learner with XAI based on soil moisture and chlorophyll analysis. →

Recent advancements in precision agriculture have introduced innovative approaches to addressing plant stress, a critical factor influencing crop productivity and agricultural sustainability. Accurate, real-time prediction of plant stress has become essential for optimizing water utilization and promoting healthy crop development. While existing machine learning methods have demonstrated efficacy, they often lack the adaptability required to accommodate the dynamic conditions of agricultural environments. Prior research has identified soil moisture and chlorophyll content as key indicators of plant health and stress, with conventional models relying on simplistic algorithms for stress prediction. However, these models exhibit limitations in scalability, adaptability and interpretability. To overcome these challenges, this study employed sparse additive models with learning (SAM-L) algorithms, integrated with explainable artificial intelligence (XAI), to provide a flexible and transparent solution. In this paper, we proposed a novel framework that integrates SAM-L and XAI to predict plant stress using soil moisture and chlorophyll content. The SAM-L algorithm is a machine learning method that focuses on sparsely selecting relevant features through additive models. It aims to enhance model interpretability while maintaining high prediction accuracy by learning sparse representations of input data. The SAM-L algorithm enhances interpretability while preserving high predictive accuracy by learning sparse feature representations from input data. Additionally, XAI was incorporated to ensure interpretable decision-making, enabling farmers and stakeholders to comprehend the rationale behind irrigation recommendations. The model's architecture incorporates a three-layer Long Short-Term Memory (LSTM) network to process sequential data effectively. The proposed framework achieved a high performance on publicly available dataset, yielding an overall accuracy of 89.2% on the multi-class classification task. Further analysis of the results across the three predefined stress categories (healthy, moderate stress, and high stress) revealed strong performance, with the model obtaining a macro F1-score of 0.88 and a macro recall of 0.88. The proposed framework not only can enhance prediction accuracy but also can promote sustainable farming practices by reducing water wastage and improving crop resilience.

Why it matches plant phenotyping methods植物ストレス状態を土壌水分とクロロフィルから推定するSAM-L・XAI・LSTM統合手法が研究の中心であり、植物の生理状態を対象とした計算的フェノタイピング手法に該当する。

abstractIn this paper, we proposed a novel framework that integrates SAM-L and XAI to predict plant stress using soil moisture and chlorophyll content.

Toward Resilience in Broadacre Agriculture: A Methodological Review of Remote Sensing in Crop Productivity, Phenology, and Environmental Stress Detection →

Large-scale rainfed cropping systems (broadacre agriculture) face intensifying climate and resource stresses that undermine yield stability and farm livelihoods. Remote sensing (RS) offers critical tools for improving resilience by monitoring crop performance—productivity, phenology, and environmental stress—across large areas and timeframes. This review aims to synthesize methodological advances over the past two decades in applying RS for broadacre crop monitoring and to identify key challenges and integration opportunities. Peer-reviewed studies across diverse crops and regions were systematically examined to evaluate the strengths, limitations, and emerging trends across the three RS application themes. The review finds that (1) RS enables spatially explicit yield estimation from regional to paddock scales, with vegetation indices (VIs) and phenology-adjusted metrics closely correlated with yield. (2) Time-series analyses of RS data effectively capture phenological transitions critical for forecasting, supported by advances in curve fitting, sensor fusion, and machine learning. (3) Thermal and multispectral indices support early detection of abiotic (drought, heat, salinity) and biotic (pests, disease) stresses, though specificity remains limited. Across themes, methodological silos and sensor integration barriers hinder holistic application. Emerging approaches—such as multi-sensor/scale fusion, RS–crop model data assimilation, and operational and big data integration—provide promising pathways toward resilience-focused decision support. Future research should define quantifiable resilience metrics and cross-theme predictive integration to guide climate adaptation.

Why it matches plant phenotyping methods作物の生産性、フェノロジー、環境ストレスをリモートセンシングで測定・推定する方法論レビューであり、植物形質・状態の取得手法が中心である。

abstractThis review aims to synthesize methodological advances over the past two decades in applying RS for broadacre crop monitoring

Prediction of harvest-related traits in barley using high-throughput phenotyping data and machine learning. →

Developing crop varieties that maintain productivity under drought is essential for future food security. Here, we investigated the potential of time-resolved high-throughput phenotyping to predict harvest-related traits and identify drought-stressed plants. Six barley lines ( Hordeum vulgare ) were grown in a greenhouse environment with well-watered and drought treatments, and dynamically phenotyped using RGB, thermal infrared, chlorophyll fluorescence, and hyperspectral imaging sensors. A temporal phenomic classification model accurately distinguished between drought-treated and control plants, achieving high accuracy (classification accuracy ≥0.97) even when relying solely on predictors from the early drought response phase. Canopy temperature depression at the early stage and RGB-derived plant size estimates at the late stage emerged as key classification features. A temporal phenomic prediction model of harvest-related traits achieved particularly high mean R 2 values for total biomass dry weight (0.97) and total spike weight (0.93), with RGB plant size estimators emerging as important predictors. Importantly, prediction accuracy for these traits remained high (R 2 ≥ 0.84) even when restricted to early developmental phase data, including the stem elongation stage. Models trained on pooled drought and control data outperformed single-treatment models and maintained high predictive power across treatments. Together, these findings highlight the value of integrating high-throughput phenotyping with temporal modeling to enable earlier, more cost-effective selection of drought-resilient genotypes and demonstrate the broader potential of phenomics-driven strategies for accelerating crop improvement under stress-prone environments.

Why it matches plant phenotyping methodsRGB・熱赤外・蛍光・ハイパースペクトルによる時系列表現型取得と、収穫形質予測モデルの構築・評価が研究の中心であるため。

abstractdynamically phenotyped using RGB, thermal infrared, chlorophyll fluorescence, and hyperspectral imaging sensors

panomiX: Investigating mechanisms of trait emergence through multi-omics data integration. →

Complex omics approaches and high-throughput phenotyping generate large, heterogeneous datasets that make linking molecular signatures to plant traits challenging. To address this challenge, here we introduce panomiX, a user-friendly toolbox for multi-omics integration, designed to enable non-experts to apply advanced computational methods with ease. PanomiX automates data preprocessing, variance analysis, multi-omics prediction, and interaction modeling through machine learning, revealing meaningful molecular interactions and synergies. We applied panomiX to a tomato heat-stress experiment combining image-based phenotyping, transcriptomics, and Fourier-transform infrared spectroscopy data, with the aim of identification of condition-specific, cross-domain relationships between gene expression, metabolite levels, and phenotypic traits. Our approach identified a network of such connections, with those linking photosynthesis traits with stress-responsive kinases in elevated temperatures among most significant ones. By simplifying complex analyses and improving interpretability, panomiX offers a platform to accelerate the discovery of trait emergence in plants and select specific candidate genes based on multi-omics analyses.

Why it matches plant phenotyping methods植物の画像ベース表現型を含むマルチオミクス統合と機械学習解析を自動化するツールを開発・適用しており、表現型解析ワークフローが中心的です。

abstracthere we introduce panomiX, a user-friendly toolbox for multi-omics integration, designed to enable non-experts to apply advanced computational methods with ease.

A high-throughput phenotyping dataset for GWAS analysis of maize under combined drought and heat stress. →

This dataset was generated to characterize the physiological and morphological mechanisms underlying tolerance and resilience to combined drought and heat stress using a panel of 106 Mediterranean maize inbred lines. To achieve this, high-throughput non-invasive phenotyping combined with genome-wide association analysis was applied to accurately capture the dynamic responses of the maize lines to stress and to dissect the genetic basis of maize tolerance and resilience. Two experiments were conducted under control (25/20 °C, 70 % field capacity (FC)) and stress conditions (35/25 °C, 30 % FC). Stress was applied from 18 to 32 DAS (days after sowing), followed by a recovery period under control conditions. Plants were grown under controlled air temperature and soil water content, and were harvested at 45 DAS. Throughout the cultivation period, multiple camera sensors captured images daily, allowing agronomic traits to be extracted for analysis. The dataset includes raw and processed images, phenotypic data obtained from these images, results of two photosynthesis related parameters, Genome-Wide Association Study (GWAS) results from one parameter as an example, and scripts used for data analysis. Additionally, metadata and a detailed description of the experimental setup are provided. This resource is suitable for researchers interested in stress phenotyping and quantitative genetics. It allows further exploration of genotype-by-environment interactions and integration with other omics datasets. The dataset provides a valuable foundation for studies aiming to understand and improve crop resilience to climate-related abiotic stresses.

Why it matches plant phenotyping methods植物の高スループット表現型取得を中心とするデータセットで、画像から農業形質を抽出するセンサー基盤、処理画像、表現型データ、解析スクリプトを提供しているため。

abstracthigh-throughput non-invasive phenotyping combined with genome-wide association analysis was applied to accurately capture the dynamic responses of the maize lines to stress

Drone-based assessment of multifunctionality in mixed cropping systems →

Abstract Modern agriculture faces the dual challenge of sustainably increasing food production while mitigating the environmental impact of intensive monocultures. Mixed cropping, which is the cultivation of multiple species or varieties, may provide ecological benefits that address productivity and environmental sustainability challenges. However, evaluating its multifunctionality in conventional agricultural field experiments is costly and labour-intensive, and small sample sizes and high spatial variability often make it difficult to detect the statistical significance of mixed cropping effects. This study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs) to efficiently assess the multifunctionality of mixed cropping systems. We conducted a field experiment comparing monocultures of oat, rye, and barley; intraspecific mixed cropping combining three oat varieties; and interspecific mixed cropping combining oat, rye, and barley. Using UAV-derived data across the entire field, including vegetation cover, plant height, and the normalised difference vegetation index, we evaluated five multifunctionalities (biomass production, spatial variability in biomass production, early canopy closure, lodging resistance, and lodging resilience). This framework reveals that mixed cropping outperforms monocropping in several key ecological functions. The proposed UAV-based HTP approach enables cost-effective, robust, and scalable evaluation of mixed cropping systems, facilitating their optimisation for multifunctionality and contributing to the advancement of sustainable agriculture.

Why it matches plant phenotyping methodsUAV画像から植被率・草高・NDVIなどの植物形質を取得する高スループット表現型解析フレームワークを導入・検証しており、フェノタイピング手法が研究の中心です。

abstractThis study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs)

Development of an automated phenotyping platform and identification of a novel QTL for drought tolerance in soybean. →

Deep understanding of slow-wilting is essential for developing drought-tolerant crops. Existing approaches to measure transpiration rates are difficult to apply to large populations due to their high cost and low throughput. To overcome these challenges, we developed a high-throughput phenotyping system that integrates a load cell sensor and an Arduino-based microcontroller device. The system tracked the transpiration rate in real time by measuring changes in the pot weight in 224 recombinant inbred lines of Taekwangkong (fast-wilting) x SS2-2 (slow-wilting) under water-restricted conditions. Among five transpiration features we determined, stress recognition time point (SRTP) and decrease in transpiration rate by stress (DTrs) are informative parameters, that are interconnected and independently affect slow-wilting as well. Quantitative trait loci (QTL) for SRTP and DTrs were identified at the same location as the major QTL for slow wilting, qSW_Gm10 , identified in the previous study. Notably, we found a novel major QTL for DTrs, qDTrs_Gm04 , with a LOD value of 42 and PVE of 47 ​%. As a candidate gene for qDTrs_Gm04 , GmWRKY58 was selected with differential expression between the parental lines under drought conditions as well as upstream sequence variation. Our high-throughput system is of help not only to biological research but breeding programs of drought-tolerant lines.

Why it matches plant phenotyping methods高スループットなセンサー基盤を開発し、ポット重量変化からダイズの蒸散率・乾燥ストレス応答をリアルタイム抽出することが研究の中心であるため。

abstractwe developed a high-throughput phenotyping system that integrates a load cell sensor and an Arduino-based microcontroller device.

Automated Rice Seedling Segmentation and Unsupervised Health Assessment Using Segment Anything Model with Multi-Modal Feature Analysis. →

This research presents a fully automated two-step method for segmenting rice seedlings and assessing their health by integrating spectral, morphological, and textural features. Driven by the global need for increased food production, the proposed method enhances monitoring and control in agricultural processes. Seedling locations are first identified by the excess green minus excess red index, which enables automated point-prompt inputs for the segment anything model to achieve precise segmentation and masking. Morphological features are extracted from the generated masks, while spectral and textural features are derived from corresponding red-green-blue imagery. Health assessment is conducted through anomaly detection using a one-class support vector machine, which identifies seedlings exhibiting abnormal morphology or spectral signatures suggesting stress. The proposed method is validated by visual inspection and Silhouette score, confirming effective separation of anomalies. For segmentation, the proposed method achieved mean dice scores ranging from 72.6 to 94.7. For plant health assessment, silhouette scores ranged from 0.31 to 0.44 across both datasets and various growth stages. Applied across three consecutive rice growth stages, the framework facilitates temporal monitoring of seedling health. The findings highlight the potential of advanced segmentation and anomaly detection techniques to support timely interventions, such as pruning or replacing unhealthy seedlings, to optimize crop yield.

Why it matches plant phenotyping methodsイネ幼苗の画像セグメンテーションと形態・スペクトル・テクスチャ特徴に基づく健康状態推定を中心とする手法開発・検証研究であり、植物表現型の取得と異常判定が中核です。

abstractThis research presents a fully automated two-step method for segmenting rice seedlings and assessing their health by integrating spectral, morphological, and textural features.

PhenoRob-F: An autonomous ground-based robot for high-throughput phenotyping of field crops →

Understanding the genetic basis of quantitative traits related to crop growth, yield, and stress response requires the acquisition of large-scale, high-quality phenotypic datasets. High-throughput phenotyping platforms have become effective tools for meeting this requirement. Autonomous mobile robots have gained prominence owing to their ability to carry heavy payloads, their operational flexibility, and their proximity to crops, which allows for higher imaging resolution. In this study, we introduce PhenoRob-F (a phenotyping robot for the field), a cross-row, wheeled robot designed for efficient and automated phenotyping under field conditions. The mobile platform and phenotyping module of the robot were engineered to meet the specific demands of field phenotyping, with integrated visual and satellite navigation systems enabling autonomous operation. We validated the performance of the robot through a series of experiments involving various crop canopies. By capturing RGB images of rice and wheat, we independently performed wheat ear detection and rice panicle segmentation. For wheat ear detection, we achieve a precision of 0.783, a recall of 0.822, and a mean average precision (mAP) of 0.853 when the YOLOv8m model is used. For rice panicle segmentation, the SegFormer_B0 model yielded a mean intersection over union (mIoU) of 0.949 and an accuracy of 0.987. Additionally, by capturing RGB-D data of maize canopies, we performed 3D reconstructions to calculate plant height, achieving an R 2 of 0.99 compared with manual measurements. Similar experiments with rapeseed yielded an R 2 of 0.97. Near-infrared spectral data collected from drought-stressed rice plants enabled the classification of drought severity into five categories, with classification accuracies ranging from 0.977 to 0.996. Our results reveal that PhenoRob-F is an effective tool for high-throughput phenotyping and is capable of providing precise data to support phenotypic trait analysis and the selection of superior crop genotypes.

Why it matches plant phenotyping methods圃場用自律ロボットと複数の画像・分光センシング、形質抽出手法を開発し、作物キャノピーで性能検証しているため、植物フェノタイピング手法が研究の中心である。

abstractwe introduce PhenoRob-F (a phenotyping robot for the field), a cross-row, wheeled robot designed for efficient and automated phenotyping under field conditions.

Visible Image-Based Machine Learning for Identifying Abiotic Stress in Sugar Beet Crops →

Results: proved that synchronized use of inexpensive RGB images, image processing, and machine learning (ML) can accurately identify crop stress. Four Machine Learning Image Modules (MLIMs) were developed to enable rapid and cost-effective identification of sugar beet stresses caused by water and/or nitrogen deficiencies. RGB images representing stressed and non-stressed crops were used in the analysis. Each MLIM was trained and tested using 54 combinations derived from nine canopy and RGB-based input features and six ML algorithms. The most accurate MLIM used RGB bands as input to a Multi-Layer Perceptron, achieving 100% accuracy for overall stress detection, and 95.6% and 86.7% for water and nitrogen stress identification, respectively. A Stochastic Gradient Descent model, using only the green band, achieved 97.78% accuracy for stress detection while requiring only one-fourth the computation time. For specific stresses, a Random Forest (RF) model using RGB bands and canopy cover achieved 86.7% for water stress, while RF with the excess green index reached 75.6% for nitrogen stress. To address the trade-off between accuracy and computational cost, a bargaining theory-based framework was applied. This approach identified optimal MLIMs that balance performance and execution efficiency.

Why it matches plant phenotyping methodsRGB画像・画像処理・機械学習を用いてテンサイの水・窒素ストレスを識別する画像ベースの表現型推定手法を開発・比較しており、ストレス状態の取得・抽出が研究の中心です。

abstractsynchronized use of inexpensive RGB images, image processing, and machine learning (ML) can accurately identify crop stress

Machine learning and digital imaging for spatiotemporal monitoring of stress dynamics in the clonal plant Carpobrotus edulis : uncovering a functional mosaic →

Background and aims Rapid, large-scale monitoring is critical to understanding spatiotemporal plant stress dynamics, but current physiological stress markers are costly, destructive and time-consuming. This study aimed to evaluate the potential of machine learning to non-destructively predict leaf betalains - yellow to reddish pigments unique to Caryophyllales species - for the first time, and to explore intra-individual variation in betalains in a clonal species and its role in responding to stressful periods. Methods We characterized the betalainic profile of an invasive clonal plant for the first time, Carpobrotus edulis (the cape fig), via high-performance liquid chromatography. We measured multiple stress markers over a year, including betalain content using our optimized method, where the species is spreading. Additionally, 3735 digital images at the leaf level were taken. Machine learning regression algorithms were trained to predict betalain accumulation from digital images, outperforming classic spectroradiometer measurements. Key results Betalain content increased sharply in non-reproductive ramets during extreme abiotic conditions in summer and during senescence in reproductive ramets. The stress markers revealed a strong intra-individual functional mosaic, underscoring the importance of spatiotemporal dimensions in stress tolerance. Conclusions We developed a scalable, non-destructive tool for betalain research that integrates digital imaging with machine learning. This approach opens new possibilities for understanding spatiotemporal stress responses, particularly in clonal plant systems, using artificial intelligence.

Why it matches plant phenotyping methods葉のデジタル画像と機械学習によりベタレイン蓄積を非破壊推定する手法を開発しており、植物ストレス状態の表現型取得が研究の中心である。

abstractThis study aimed to evaluate the potential of machine learning to non-destructively predict leaf betalains

CSCA-YOLOv8: A lightweight network model for evaluating drought resistance in mung bean. →

Drought is one of the main factors affecting mung bean production in China. Screening drought-resistant germplasm resources and cultivating drought-resistant varieties are of great significance to the development of the mung bean industry in China. Combined with chlorophyll fluorescence imaging technology, this paper proposes a lightweight mung bean drought resistance identification network model based on YOLOv8, referred to as CSCA-YOLOv8. The model uses StarNet to replace the backbone network of YOLOv8 to reduce the size of the model. The C2f_Star module is introduced in the neck structure instead of the original C2f module. Then, in order to enhance the network's attention to the key regions in the feature map, the Context Anchor Attention Mechanism (CAA) module is also introduced into the fourth C2f_Star module. Then, a CGBD module is proposed in the neck structure to reconstruct the ordinary convolution to improve the feature extraction ability of the model for small targets. Finally, the SIoU loss function is used to replace CIoU to accelerate the convergence of the model. In the actual data analysis, we used the collected 4808 chlorophyll fluorescence images of the natural mung bean population under drought stress to make the Mungbean Drought Datatset(MDD) and made classification labels for each image according to different drought resistance levels, which were 0, 1, 2, 3, 4 and 5. We also verified the excellent performance and generalization performance of the model using the collected MDD dataset. The final experimental results show that compared with the YOLOv8s baseline model, the number of parameters of our proposed algorithm is reduced by 24%, the floating point number is reduced by 35%, and the accuracy is improved by 2.52%, which supports the deployment on embedded edge devices with limited computing power. Therefore, our proposed algorithm has great potential in the field of drought resistance identification and germplasm selection of mung bean.

Why it matches plant phenotyping methods乾燥抵抗性を推定するクロロフィル蛍光画像ベースのYOLOv8改良モデルを開発し、データセット上で性能・汎化性能を検証しており、表現型取得・抽出手法が中心である。

abstractCombined with chlorophyll fluorescence imaging technology, this paper proposes a lightweight mung bean drought resistance identification network model based on YOLOv8

Time course measurements of leaf elevation angles during shade avoidance response in Arabidopsis thaliana using Raspberry Pi computers and computer vision technique. →

Shade avoidance response in plants includes a higher leaf elevation angle. A cost-effective and noninvasive high throughput image analysis technique was used to measure the dynamics of leaf elevation angles during shade avoidance response in Arabidopsis . Time-lapse images were taken from the top and the side of a plant using Raspberry Pi computers. The leaf elevation index for each plant is determined from the plant dimensions measured by an image analysis software package PlantCV . This method was used to monitor the dynamics of changing leaf elevation angles in wild-type plants and in shade avoidance mutants pif4-2pif5-3 and pif7-2 plants.

Why it matches plant phenotyping methodsRaspberry Piと画像解析を用いて葉の仰角を定量化する高スループット手法が研究の中心であり、植物形質の時系列取得に実質的に適用されている。

abstractA cost-effective and noninvasive high throughput image analysis technique was used to measure the dynamics of leaf elevation angles during shade avoidance response in Arabidopsis .

Seeing the unseen: A novel approach to extract latent plant root traits from digital images. →

A novel approach, the Algorithmic Root Trait (ART) extraction method, identifies and quantifies computationally-derived plant root traits, revealing latent patterns related to dense root clusters in digital images. Using an ensemble of multiple unsupervised machine learning algorithms and a custom algorithm, 27 ARTs were extracted reflecting dense root cluster size and spatial location. These ARTs were then used independently and in combination with Traditional Root Traits (TRTs) to classify wheat genotypes differing in drought tolerance. ART-based models outperformed TRT-only models in drought classification (e.g., 96.3 ​% vs. 85.6 ​% accuracy). Combining ARTs and TRTs further improved accuracy to 97.4 ​%. Notably, 4 selected ARTs matched the performance of all 23 TRTs, offering 5.8 ​× ​higher information density (0.213 vs. 0.037 accuracy/feature). This superiority reflects the ability of ARTs to capture richer, more complex architectural information, evidenced by higher internal variability (35.59 ​± ​11.41 vs. 28.91 ​± ​14.28 for TRTs) and distinct data structures in multivariate analyses; PERMANOVA confirmed that ARTs and TRTs provide complementary insights. Validated through experiments in controlled environments and field conditions with wheat drought-tolerant and susceptible genotypes, ART offers a scalable, customisable toolset for high-throughput phenotyping of plant roots. By bridging conventional, visually derived traits with autonomous computational analyses, this method broadens root phenotyping pipelines and underscores the value of harnessing sensor data that transcends human perception. ART thus emerges as a promising framework for revealing hidden features in plant imaging, with broader applications across plant science to deepen our understanding of crop adaptation and resilience.

Why it matches plant phenotyping methodsデジタル画像から根の潜在形質を抽出する計算法を開発し、圃場・制御環境で検証した、植物フェノタイピング手法が中心の研究。

abstractA novel approach, the Algorithmic Root Trait (ART) extraction method, identifies and quantifies computationally-derived plant root traits

Phenomics‐driven insights into zoysiagrass drought resistance using small unmanned aircraft systems (sUAS)‐based hyperspectral images →

Abstract The application of small unmanned aircraft systems (sUAS)‐based high‐throughput phenotyping in plant breeding has advanced significantly over the past decade. Hyperspectral images and machine learning approaches offer potential to enhance drought resistance screening in turfgrass. However, large‐scale field applications remain limited, and the transition from controlled environments to real‐world phenotyping is not well understood. This study aimed to develop an sUAS‐based hyperspectral image workflow to monitor changes in turfgrass canopy reflectance during drought, validate previously reported indices from controlled environment studies in a large‐scale field study, and estimate visual turfgrass quality (TQ) from hyperspectral images. Images were collected from a zoysiagrass ( Zoysia spp.) mapping population at three dates under varying soil moisture conditions. Vegetation indices (VIs) related to light use efficiency, leaf pigments, senescence, water status, and green vegetation were computed and compared. Top‐performing genotypes under drought exhibited greater absorption in blue and red wavelengths and higher near‐infrared reflectance than poor‐performing ones. The photochemical reflectance index and plant senescence reflectance index were highly correlated with TQ ( r = 0.84 and −0.76), showed higher coefficient of variation (range 18%–37%), and had higher broad‐sense heritability (0.73–0.74) than normalized difference vegetation index (0.69), warranting their use in large‐scale field study. Machine learning models estimated TQ with a mean absolute error of 0.46. These findings highlight the importance of integrating VIs related to light use efficiency, leaf pigments, senescence, and water status to gain deeper insights into turfgrass drought response and support breeding for stress tolerance.

Why it matches plant phenotyping methodssUASハイパースペクトル画像によるキャノピー形質取得ワークフローを開発し、指標を検証して芝草品質を推定しており、フェノタイピング手法が中心である。

abstractThis study aimed to develop an sUAS‐based hyperspectral image workflow to monitor changes in turfgrass canopy reflectance during drought, validate previously reported indices from controlled environment studies in a large‐scale field study, and estimate visual turfgrass quality (TQ) from hyperspectral images.

Thermal Safety Margins and Peak Leaf Temperatures Predict Vulnerability of Diverse Plant Species to an Experimental Heatwave →

ABSTRACT Extreme heat can push plants beyond their thermal safety margin ( TSM ) if maximum leaf temperature ( T leaf_max ) exceeds leaf critical temperature ( T crit ). The TSM is potentially useful for assessing heat vulnerability across species but needs further validation, so we exposed 50 tree/shrub species in controlled glasshouses to a 6‐day heatwave (peak air temperature = 41°C). Many species increased their mean T crit during the heatwave (42%), with Δ T crit ranging from +1°C to 4°C, but other species did not acclimate or were impaired by heat stress (58%). Species T leaf_max explained ~55% of the variation in species T crit and was a key correlate of the plasticity of T crit among species. Species with high Δ T crit also had higher Δ T leaf_max , with leaves being 7°‒12°C hotter during the heatwave than under baseline conditions. Both T leaf_max and TSMs were correlated with heatwave damage across diverse species from contrasting climate zones. Species differences in TSMs were stable across measurement temperatures, correctly identified the most vulnerable species, and were strongly associated with T leaf_max . Our results suggest that (1) T leaf_max alone is more informative than T crit for ranking species heat tolerance, and (2) species vulnerability to heatwaves is most reliably assessed by using TSMs that integrate T leaf_max with T crit across species.

Why it matches plant phenotyping methods葉温・熱安全余裕度（TSM）を用いた植物の熱脆弱性評価手法を、多種の植物で検証し、損傷予測性能や種間比較の妥当性を評価しているため、方法的役割が中心である。

abstractThe TSM is potentially useful for assessing heat vulnerability across species but needs further validation

A machine-learning-powered spectral-dominant multimodal soft wearable system for long-term and early-stage diagnosis of plant stresses. →

Addressing the global malnutrition crisis requires precise and timely diagnostics of plant stresses to enhance the quality and yield of nutrient-rich crops, such as tomatoes. Soft wearable sensors offer a promising approach by continuously monitoring plant physiology. However, challenges remain in identifying direct physiological indicators of plant stresses, hindering the development of accurate diagnostic models for predicting symptom progression. Here, we introduce a machine-learning-powered spectral-dominant multimodal soft wearable system (MapS-Wear) for precise, long-term, and early-stage diagnosis of stresses in tomatoes. MapS-Wear continuously tracks leaf surrounding temperature, humidity, and unique in-situ transmission spectra, which are critical stress-related indicators. The machine learning framework processes these multimodal data to predict gradual stress progression and diagnose nutrient deficiencies in plants over 10 days earlier than conventional computer vision methods. Moreover, MapS-Wears enables portable and large-scale screening of grafted tomato varieties in greenhouses, accelerating the identification of compatible grafting combinations. This demonstration highlights the potential for high-throughput plant phenotyping and yield improvement.

Why it matches plant phenotyping methods植物ストレスの生理状態を連続センシングし、機械学習で早期診断・進行予測するウェアラブル計測システムが研究の中心であり、植物フェノタイピング手法として明確に該当する。

abstractHere, we introduce a machine-learning-powered spectral-dominant multimodal soft wearable system (MapS-Wear) for precise, long-term, and early-stage diagnosis of stresses in tomatoes.

Drone-based, multispectral photogrammetric point clouds to classify fire severity at differing canopy height strata →

Abstract Background Remote sensing techniques for assessing fire severity using two-dimensional imagery, such as satellite data, are limited to a single severity value per pixel, typically at a 30-m resolution. This often leads to an underestimation of understory fire severity, as live tree crowns can obscure the extent of the burned area beneath. By leveraging the three-dimensional capabilities of drone imagery, a more comprehensive assessment of fire severity across different canopy height strata can be achieved. Methods We show how drone digital aerial photogrammetry (dDAP), also known as structure from motion, can be used to generate three-dimensional multispectral photogrammetric point clouds for quantifying fire effects at various canopy height strata as well as classify ground cover below normally occluding overstory trees. Conducted during prescribed fires at Fort Jackson, South Carolina, RGB and multispectral imagery were collected via drone both pre- and post-fire at five plots, with two additional unburned plots flown to serve as controls. Multispectral photogrammetric point clouds were generated and NDVI values were calculated for each point. Point clouds were segmented into 2-m height stratum layers, to compare NDVI values for different canopy height strata pre- and post-fire. Orthoimages of the understory, overstory, and traditional nadir views were generated. Conclusions Findings showed that prescribed fire had a substantial effect on NDVI values up to 6 m in height, with only minor effects observed above 6 m. Ground cover under the canopy, typically occluded from overhead imagery, was classified with 87% accuracy. This study demonstrated the ability to digitally remove occluding tall vegetation using dDAP and to derive a more precise assessment of fire effects on ground and understory vegetation compared to two-dimensional satellite imagery.

Why it matches plant phenotyping methodsドローンの3次元マルチスペクトル点群を用いて、植物の樹冠層別の火災影響・NDVI・地被状態を抽出する手法が研究の中心であり、単なる生物学的測定ではない。

abstractcan be used to generate three-dimensional multispectral photogrammetric point clouds for quantifying fire effects at various canopy height strata as well as classify ground cover below normally occluding overstory trees

Point-of-care diagnostics and resistance phenotyping to combat ash dieback →

Non-destructive tree phenotyping for resistance screening and early, presymptomatic disease detection figures prominently among the most important practical limitations inherent in forest health management. The need for point-of-care tools is particularly acute for managing diseases caused by non-native pathogens, often resulting in difficult-to-control biological invasions. One such case is represented by ash dieback in Europe, caused by Hymenoscyphus fraxineus, which has led Sweden to red-list its main host, European ash ( Fraxinus excelsior ). We evaluated the use of near-infrared (NIR) spectroscopy and machine learning for detection of presymptomatic infections by H. fraxineus and identification of disease-resistance European ash accessions. Here, we show that presymptomatic infected trees can be distinguished from pathogen-free trees with a testing error rate of 0.161 in a controlled inoculation experiment. We also show that the same approach can be used to identify disease-resistant European ash accessions based on data from two independent, multiyear clonal trials, with a testing error rate of 0.155. These results confirm that NIR spectroscopy combined with machine learning is sensitive enough for early disease detection and resistance screening in this system. This is consistent with prior findings in other tree pathosystems and suggests that this approach could be developed into an operational tool to facilitate the management of biological invasions of forest environments by non-native pathogens, including habitat restoration with resistant germplasm.

Why it matches plant phenotyping methodsNIR分光と機械学習を用いて、感染樹の病徴状態と病害抵抗性を非破壊・早期推定する方法を評価しており、植物フェノタイピング手法の開発・検証が中心である。

abstractNon-destructive tree phenotyping for resistance screening and early, presymptomatic disease detection figures prominently among the most important practical limitations inherent in forest health management.

FreezeNet: A Lightweight Model for Enhancing Freeze Tolerance Assessment and Genetic Analysis in Wheat. →

Freeze injury during the seedling stage significantly impacts wheat growth and yield, making the development of freeze-tolerant varieties crucial for ensuring stable yields. To identify key genetic factors for wheat freeze tolerance, an accurate assessment of freeze tolerance is necessary. However, traditional methods, such as visual inspection, are subjective and can vary significantly among observers. In this study, we developed FreezeNet, a lightweight deep learning model designed to accurately quantify freeze injury using an image-based phenotyping method. Freeze tolerance traits, including vegetation area (VA), green vegetation area (GVA), yellow vegetation fraction (YVF), and mean hue value (mHue), were extracted for freeze tolerance assessment. We captured standardized images with a smartphone and used FreezeNet to extract the freeze tolerance traits for 220 wheat accessions. These traits were strongly correlated with traditional injury scores estimated through visual inspection. Moreover, they presented relatively high heritability. Using these traits, we conducted genome-wide association studies (GWASs) to identify genetic loci associated with freeze tolerance. Eleven significant QTLs associated with freeze tolerance were identified, including 8 novel loci. By integrating four of these loci into a wheat germplasm that lacked any of the 11 QTLs, we significantly enhanced its freeze resistance, demonstrating the practical application of these genetic loci in breeding for improved freeze tolerance. Our results highlight FreezeNet as an advanced tool for assessing wheat freeze injury and identifying the genetic factors responsible for freeze tolerance, with the potential to guide breeding efforts toward the development of more resilient wheat varieties.

Why it matches plant phenotyping methodsFreezeNetは画像ベースでコムギの凍害形質を定量化する深層学習手法として開発・検証されており、植物フェノタイピング手法が研究の中心です。

abstractwe developed FreezeNet, a lightweight deep learning model designed to accurately quantify freeze injury using an image-based phenotyping method.

Cellular Mechanical Phenotypes of Drought-Resistant and Drought-Sensitive Rice Species Distinguished by Double-Resonator Piezoelectric Cytometry Biosensors. →

Various high-throughput screening methods have been developed to explore plant phenotypes, primarily at the organ and whole plant levels. There is a need to develop phenomics methods at the cellular level to narrow down the genotype to phenotype gap. This study used double-resonator piezoelectric cytometry biosensors to capture the dynamic changes in mechanical phenotypes of living cells of two rice species, drought-resistant Lvhan No. 1 and drought-sensitive 6527, under PEG6000 drought stress. In rice cells of Lvhan No. 1 and 6527, mechanomics parameters, including cell-generated surface stress (ΔS) and viscoelastic parameters (G', G″, G″/G'), were measured and compared under 5-25% PEG6000. Lvhan No. 1 showed larger viscoelastic but smaller surface stress changes with the same concentration of PEG6000. Moreover, Lvhan No. 1 cells showed better wall-plasma membrane-cytoskeleton continuum structure maintaining ability under drought stress, as proven by transient tension stress (ΔS > 0) and linear G'~ΔS, G″~ΔS relations at higher 15-25% PEG6000, but not for 6527 cells. Additionally, two distinct defense and drought resistance mechanisms were identified through dynamic G″/G' responses: (i) transient hardening followed by softening recovery under weak drought, and (ii) transient softening followed by hardening recovery under strong drought. The abilities of Lvhan No. 1 cells to both recover from transient hardening to softening and to recover from transient softening to hardening are better than those of 6527 cells. Overall, the dynamic mechanomics phenotypic patterns (ΔS, G', G″, G″/G', G'~ΔS, G″~ΔS) verified that Lvhan No. 1 has better drought resistance than that of 6527, which is consistent with the field data.

Why it matches plant phenotyping methods植物細胞の機械的表現型を取得する高スループットなバイオセンサー手法を用い、乾燥ストレス応答を定量化しており、表現型取得法が研究の中心である。

abstractThere is a need to develop phenomics methods at the cellular level to narrow down the genotype to phenotype gap.

Selecting High Forage-Yielding Alfalfa Populations in a Mediterranean Drought-Prone Environment Using High-Throughput Phenotyping →

Alfalfa is a deep-rooted perennial forage crop with diverse drought-tolerant traits. This study evaluated 250 alfalfa half-sib populations over three growing seasons (2021–2023) under irrigated and rainfed conditions in the Mediterranean drought-prone region of Central Chile (Cauquenes), aiming to identify high-yielding, drought-tolerant populations using remote sensing. Specifically, we assessed RGB-derived indices and canopy temperature difference (CTD; Tc − Ta) as proxies for forage yield (FY). The results showed considerable variation in FY across populations. Under rainfed conditions, winter FY ranged from 1.4 to 6.1 Mg ha−1 and total FY from 3.7 to 14.7 Mg ha−1. Under irrigation, winter FY reached up to 8.2 Mg ha−1 and total FY up to 25.1 Mg ha−1. The AlfaL4-5 (SARDI7), AlfaL57-7 (WL903), and AlfaL62-9 (Baldrich350) populations consistently produced the highest yields across regimes. RGB indices such as hue, saturation, b*, v*, GA, and GGA positively correlated with FY, while intensity, lightness, a*, and u* correlated negatively. CTD showed a significant negative correlation with FY across all seasons and water regimes. These findings highlight the potential of RGB imaging and CTD as effective, high-throughput field phenotyping tools for selecting drought-resilient alfalfa genotypes in Mediterranean environments.

Why it matches plant phenotyping methodsRGB画像指標と冠層温度差を用いた高スループット表現型解析を、アルファルファ集団の収量・干ばつ耐性選抜に実質的に適用しており、表現型取得手法が中心的である。

titleSelecting High Forage-Yielding Alfalfa Populations in a Mediterranean Drought-Prone Environment Using High-Throughput Phenotyping

panomiX: Investigating Mechanisms Of Trait Emergence Through Multi-Omics Data Integration →

Abstract Complex omics approaches and high-throughput phenotyping generate large, heterogeneous datasets that make linking molecular signatures to plant traits challenging. To address this challenge, here we introduce panomiX, a user-friendly toolbox for multi-omics integration, designed to enable non-experts to apply advanced computational methods with ease. panomiX automates data preprocessing, variance analysis, multi-omics prediction, and interaction modeling through machine learning, revealing meaningful molecular interactions and synergies. We applied panomiX to a tomato heat-stress experiment combining image-based phenotyping, transcriptomics, and Fourier-transform infrared spectroscopy data, with the aim of identification of condition-specific, cross-domain relationships between gene expression, metabolite levels, and phenotypic traits. Our approach identified a network of such connections, with those linking photosynthesis traits with stress-responsive kinases in elevated temperatures among most significant ones. By simplifying complex analyses and improving interpretability, panomiX offers a platform to accelerate the discovery of trait emergence in plants and select specific candidate genes based on multi-omics analyses.

Why it matches plant phenotyping methods植物形質データを含むマルチオミクス統合用ツール panomiX を開発・提示し、画像ベース表現型データを統合解析する再利用可能な計算ワークフローを示しているため、表現型取得そのものより解析ツールが中心的な方法論的貢献である。

abstracthere we introduce panomiX, a user-friendly toolbox for multi-omics integration

A Detailed Guide to Recording and Analyzing Arabidopsis thaliana Leaf Surface Potential Dynamics Elicited by Mechanical Wounding. →

Recordings of electric potential changes on plant surfaces have been utilized to identify the components and mechanisms involved in the formation and transmission of systemic signals elicited by stimuli such as herbivory, wounding, or burning. The recorded responses, commonly referred to as slow wave or variation potentials, exhibit striking variability in their waveform. The extent to which this variability is due to differences in experimental procedures or plant biological variability remains unclear. Here, we provide a detailed and robust protocol refined from years of experience in conducting leaf surface potential recordings of Arabidopsis thaliana in response to mechanical wounding. This protocol serves as a comprehensive tutorial covering plant growth, procedures for reproducible mechanical wounding, critical aspects of electrophysiological recordings, and statistical analysis of surface potential recordings. It particularly emphasizes the construction and maintenance of electrodes, placement of the reference or ground electrode, mechanisms for wounding, and data analysis. This protocol aims to promote and facilitate the adoption, standardization, and interoperability of plant surface potential recordings among research groups, thereby increasing the reproducibility and comparability of data within the field. Key features • Recording electric potential changes on the petiole of 5-week-old Arabidopsis plants using noninvasive surface electrodes, improving the wounding procedure, reproducibility, and data processing from [1]. • Genotype-independent method for phenotyping, including parallel recordings from multiple plants. • Guidelines for plant growth conditions, unambiguous leaf assignment by order of emergence, and detailed instructions for electrode fabrication and maintenance. • Instructions for constructing devices for standardized, reproducible mechanical wounding along with a custom script for unbiased and semi-automated data analysis.

Why it matches plant phenotyping methods植物の表面電位を再現性高く記録・解析する電気生理学的フェノタイピング手法の詳細プロトコルであり、電極、標準化創傷、データ解析、再現性・相互運用性が中心的に扱われている。

abstractHere, we provide a detailed and robust protocol refined from years of experience in conducting leaf surface potential recordings of Arabidopsis thaliana in response to mechanical wounding.

The Unstable Relationship Between Drought Status and Leaf Water Content Complicates the Remote Sensing of Tree Drought Stress. →

Remote sensing holds promise for ecosystem-level monitoring of plant drought stress but is limited by uncertain linkages between physiological stress and remotely sensed metrics of water content. Here, we investigate the stability of relationships between water potential (Ψ) and water content (measured in situ and via repeat airborne VSWIR imaging) over diel, seasonal, and spatial variation in two xeric oak tree species. We also compare these field-based relationships with ones established in laboratory settings that might be used as calibration. Due to confounding physiological processes related to growth, both in situ and remotely sensed metrics lacked consistent relationships with stress when measured across space or through time. Relationships between water content and physiological drought stress measured over the growing season were stronger and more closely related to established laboratory-based drydown methods than those measured across space (i.e., between wet trees and dry trees). These results provide insight into the utility of "space for time" approaches in remote sensing and demonstrate both important limitations and the potential power of high temporal resolution remote sensing for detecting drought stress.

Why it matches plant phenotyping methods樹木の干ばつストレスを対象に、航空機VSWIR画像による含水量推定と水ポテンシャルとの関係を時空間的に検証しており、リモートセンシング手法の妥当性・限界評価が中心です。

abstractwater content (measured in situ and via repeat airborne VSWIR imaging)

A low-cost protocol for the optical method of vulnerability curves to calculate P 50 . →

Premise The quantification of plant drought resistance, particularly embolism formation, within and across species, is critical for ecosystem management and agriculture. We developed a cost-effective protocol to measure the water potential at which 50% of hydraulic conductivity ( P 50 ) is lost in stems, using affordable and accessible materials in comparison to the traditional optical method. Methods and results Our protocol uses inexpensive USB microscopes, which are secured along with the plants to a pegboard base to avoid movement. A Python program automatized the image acquisition. This method was applied to quantify P 50 in an exotic species ( Nicotiana glauca ) and native species ( Rhus integrifolia ) of the Mediterranean vegetation in Baja California, Mexico. Conclusions The intra- and interspecific patterns of variation in stem P 50 of N. glauca and R. integrifolia were obtained using the low-cost optical method with widely available and affordable materials that can be easily replicated for other species.

Why it matches plant phenotyping methods植物の茎の水理的脆弱性（P50）を測定する低コスト光学プロトコルを開発し、USB顕微鏡とPythonによる画像取得を用いて適用・検証しており、表現型取得法が研究の中心である。

abstractWe developed a cost-effective protocol to measure the water potential at which 50% of hydraulic conductivity ( P 50 ) is lost in stems, using affordable and accessible materials in comparison to the traditional optical method.

Exploring Nutrient Deficiencies in Lettuce Crops: Utilizing Advanced Multidimensional Image Analysis for Precision Diagnosis. →

In agricultural production, lettuce growth, yield, and quality are impacted by nutrient deficiencies caused by both environmental and human factors. Traditional nutrient detection methods face challenges such as long processing times, potential sample damage, and low automation, limiting their effectiveness in diagnosing and managing crop nutrition. To address these issues, this study developed a lettuce nutrient deficiency detection system using multi-dimensional image analysis and Field-Programmable Gate Arrays (FPGA). The system first applied a dynamic window histogram median filtering algorithm to denoise captured lettuce images. An adaptive algorithm integrating global and local contrast enhancement was then used to improve image detail and contrast. Additionally, a multi-dimensional image analysis algorithm combining threshold segmentation, improved Canny edge detection, and gradient-guided adaptive threshold segmentation enabled precise segmentation of healthy and nutrient-deficient tissues. The system quantitatively assessed nutrient deficiency by analyzing the proportion of nutrient-deficient tissue in the images. Experimental results showed that the system achieved an average precision of 0.944, a recall rate of 0.943, and an F1 score of 0.943 across different lettuce growth stages, demonstrating significant improvements in automation, accuracy, and detection efficiency while minimizing sample interference. This provides a reliable method for the rapid diagnosis of nutrient deficiencies in lettuce.

Why it matches plant phenotyping methodsレタスの栄養欠乏組織を画像から分割・定量するシステムの開発が中心であり、植物状態の画像ベース表現型計測に該当する。

abstractthis study developed a lettuce nutrient deficiency detection system using multi-dimensional image analysis and Field-Programmable Gate Arrays (FPGA).

A Multiple Instance Learning Approach to Study Leaf Wilt in Soybean Plants →

Recent years have seen significant technological advancements in precision farming and plant phenotyping. Remote sensing along with deep learning (DL) techniques can increase phenotyping efficiency and help on-farm decision making with rapid stress detection. In this work, we use these techniques to evaluate drought stress in soybean plants, a crop whose yield is significantly affected by water availability. Images were taken from a high vantage in the field at various times throughout the day. Each image is given a wilting score ranging from 0 to 4 by expert scorers. We implement a DL method called multiple instance learning (MIL) to perform wilt classification as well as generate heat maps that highlight wilt levels in specific regions of the image. Given the significant overlap between adjacent classes in our dataset, we were able to achieve an overall classification accuracy of 64% and a one-off accuracy of 96% on our holdout test set. Our model outperformed DenseNet121 in most metrics, and provided comparable performance to a vision transformer (ViT) while having fewer parameters overall, less complexity (useful for edge implementations), and some interpretability. Furthermore, we were able to show that our model outperformed expert human annotators by predicting more consistent and accurate wilt levels when considering single-image re-annotation. The results show that our proposed methodology can be a useful approach in detecting drought stress in soybean fields to facilitate efficient crop management and aid selection of drought-resilient varieties.

Why it matches plant phenotyping methods画像からダイズ葉の萎凋・干ばつストレスを推定するMIL手法の開発と性能比較が中心であり、植物状態の表現型推定に該当する。

abstractWe implement a DL method called multiple instance learning (MIL) to perform wilt classification as well as generate heat maps that highlight wilt levels in specific regions of the image.

ALPHA: A High Throughput System for Quantifying Growth in Aquatic Plants →

The need for more sustainable agricultural systems is becoming increasingly apparent. The global demand for agricultural products-food, feed, fuel and fiber-will continue to increase as the global population continues to grow. This challenge is compounded by climate change. Not only does a changing climate make it difficult to maintain stable yields but current agricultural systems are a major source of greenhouse gas emissions and continue to drive the problem further. Therefore, future agricultural systems must not only increase production but also significantly decrease negative environmental impacts. One approach to addressing this is to begin breeding and cultivating new plant species that have fundamental sustainability advantages over our existing crops. The Lemnaceae, commonly known as duckweeds, are one family of plants that have potential to increase output and reduce the negative environmental impacts of agricultural production. Herein we describe the Automated Lab-scale PHenotyping Apparatus, ALPHA, for high-throughput phenotyping of Lemnaceae. ALPHA is being used for selective breeding of one species, Lemna gibba , toward the goal of creating a new crop for use in sustainable agricultural systems. ALPHA can be used on many small aquatic plant species to assess growth rates in different environmental conditions. A proof of principle use case is demonstrated where ALPHA is used to determine saltwater tolerance of six different clones of L. gibba .

Why it matches plant phenotyping methodsALPHAは水生植物の成長率をハイスループットに定量化するための装置・表現型解析プラットフォームとして開発・実証されており、手法が研究の中心である。

abstractHerein we describe the Automated Lab-scale PHenotyping Apparatus, ALPHA, for high-throughput phenotyping of Lemnaceae.

RPT: An integrated root phenotyping toolbox for segmenting and quantifying root system architecture. →

Summary The dissection of genetic architecture for rice root system is largely dependent on phenotyping techniques, and high‐throughput root phenotyping poses a great challenge. In this study, we established a cost‐effective root phenotyping platform capable of analysing 1680 root samples within 2 h. To efficiently process a large number of root images, we developed the root phenotyping toolbox (RPT) with an enhanced SegFormer algorithm and used it for root segmentation and root phenotypic traits. Based on this root phenotyping platform and RPT, we screened 18 candidate (quantitative trait loci) QTL regions from 219 rice recombinant inbred lines under drought stress and validated the drought‐resistant functions of gene OsIAA8 identified from these QTL regions. This study confirmed that RPT exhibited a great application potential for processing images with various sources and for mining stress‐resistance genes of rice cultivars. Our developed root phenotyping platform and RPT software significantly improved high‐throughput root phenotyping efficiency, allowing for large‐scale root trait analysis, which will promote the genetic architecture improvement of drought‐resistant cultivars and crop breeding research in the future.

Why it matches plant phenotyping methods根系画像のセグメンテーションと形質定量を行う高スループット基盤およびRPTソフトウェアの開発が研究の中心であり、植物フェノタイピング手法に該当する。

abstractwe developed the root phenotyping toolbox (RPT) with an enhanced SegFormer algorithm and used it for root segmentation and root phenotypic traits.

Minimum leaf conductance during drought: unravelling its variability and impact on plant survival →

Summary Leaf water loss after stomatal closure is key to understanding the effects of prolonged drought on vegetation. It is therefore important to accurately quantify such water losses to improve physiology‐based models of drought‐induced plant mortality. We measured water loss of detached leaves continuously during dehydration in nine woody angiosperm species. We computed minimum leaf conductance ( g min ) at different water potential thresholds along a sequence of physiological function losses, spanning from turgor loss point to hydraulic failure. A mechanistic model evaluated the impact of different g min estimations on the time to hydraulic failure (THF). Residual conductance is not steady and decreases continuously at varying rates across species during the entire dehydration process, even after correcting for leaf shrinkage and vapor pressure deficit shifts. Different estimations of g min had a significant impact on the THF predicted by the model, especially for drought‐resistant species. We demonstrate that residual conductance is variable during dehydration, and thus, it is important to use physiological or water status boundaries for its estimation in order to determine distinct g min values of water loss. We describe an accurate, repeatable and open‐source methodology to estimate g min . Such methodology could enhance models of plant mortality under drought.

Why it matches plant phenotyping methods葉の脱水過程における最小葉コンダクタンスの定量法を開発・評価し、反復可能な方法論として提示しているため、植物生理フェノタイピング手法が中心です。

abstractWe describe an accurate, repeatable and open‐source methodology to estimate g min .

Fire ecology database for documenting plant responses to fire events in Australia. →

An understanding of fire-response traits is essential for predicting how fire regimes structure plant communities and for informing fire management strategies for biodiversity conservation. Quantification of these traits is complex, encompassing several levels of data abstraction scaling up from field observations of individuals, to general categories of species responses. We developed the Fire Ecology Database to accommodate this complexity. Its conceptual framework is underpinned by a flexible data pipeline enabling links between fire-related trait data and event information at individual, population, and community levels. Key features include: (a) concise and documented trait and method vocabularies; (b) documented uncertainty in observations and aggregation; and (c) documented origin of data including field observations, laboratory experiments, and expert elicitation. We demonstrated application of our framework using data from new field surveys and existing data sets in New South Wales, Australia. The database includes 14 traits for 6,287 plant species derived from 8,936 field work records from 2007 to 2018, 7,054 field records from surveys after 2019, and 48,306 records from 301 existing sources.

Why it matches plant phenotyping methods火災応答形質を体系的に収集・標準化するデータベースとデータパイプライン自体が中心的な方法論的貢献であり、植物形質データの不確実性・測定法・由来も記録しているため、フェノタイピング用データ基盤として含める。

abstractWe developed the Fire Ecology Database to accommodate this complexity. Its conceptual framework is underpinned by a flexible data pipeline enabling links between fire-related trait data and event information at individual, population, and community levels.

Excessive leaf oil modulates the plant abiotic stress response via reduced stomatal aperture in tobacco (Nicotiana tabacum). →

High lipid producing (HLP) tobacco (Nicotiana tabacum) is a potential biofuel crop that produces an excess of 30% dry weight as lipid bodies in the form of triacylglycerol. While using HLP tobacco as a sustainable fuel source is promising, it has not yet been tested for its tolerance to warmer environments that are expected in the near future as a result of climate change. We found that HLP tobacco had reduced stomatal conductance, which results in increased leaf temperatures up to 1.5°C higher under control and high temperature (38°C day/28°C night) conditions, reduced transpiration, and reduced CO 2 assimilation. We hypothesize this reduction in stomatal conductance is due to the presence of excessive, large lipid droplets in HLP guard cells imaged using confocal microscopy. High temperatures also significantly reduced total fatty acid levels by 55% in HLP plants; thus, additional engineering may be needed to maintain high titers of leaf oil under future climate conditions. High-throughput image analysis techniques using open-source image analysis platform PlantCV for thermal image analysis (plant temperature), stomata microscopy image analysis (stomatal conductance), and fluorescence image analysis (photosynthetic efficiency) were developed and applied in this study. A corresponding set of PlantCV tutorials are provided to enable similar studies focused on phenotyping future crops under adverse conditions.

Why it matches plant phenotyping methodsPlantCVを用いた熱画像・気孔顕微鏡画像・蛍光画像の高スループット解析手法を開発・適用し、植物温度、気孔関連指標、光合成効率を推定しているため、表現型取得手法が中心的です。

abstractHigh-throughput image analysis techniques using open-source image analysis platform PlantCV for thermal image analysis (plant temperature), stomata microscopy image analysis (stomatal conductance), and fluorescence image analysis (photosynthetic efficiency) were developed and applied in this study.

Enhancing genomic-based forward prediction accuracy in wheat by integrating UAV-derived hyperspectral and environmental data with machine learning under heat-stressed environments. →

Integrating genomic, hyperspectral imaging (HSI), and environmental data enhances wheat yield predictions, with HSI providing detailed spectral insights for predicting complex grain yield (GY) traits. Incorporating HSI data with single nucleotide polymorphic markers (SNPs) resulted in a substantial improvement in predictive ability compared to the conventional genomic prediction models. Over the course of several years, the prediction ability varied due to diverse weather conditions. The most comprehensive parametric model tested, which included SNPs, HSI, and environmental covariates data, consistently achieved the best results, closely followed by machine learning (ML) approaches when considering the same omics data. For example, the most comprehensive model (M9), under the forward prediction cross-validation scheme, predicted the GY of the 2023 growing season using data from 2021 and 2022 for a correlation between predicted and observed values of 0.53. This model demonstrated superior performance compared to less complex models, emphasizing the advantage of integrating numerous data sources and their interactive effects. Furthermore, when comparing the top 25% of the predicted lines versus the corresponding observed lines with the highest GY, the M9 model returned a coincide index (CI) of 55% (i.e., in both sets, 55% of the top 25% values were common), whereas for the highest performing ML model (gradient boosting regression), the CI was of 46%. This study highlights the potential of multi-data source approaches to accelerate the selection of heat-tolerant wheat genotypes.

Why it matches plant phenotyping methodsUAVハイパースペクトル画像を用いた小麦収量形質の推定を、ゲノム・環境データとの統合モデルで検証しており、形質予測性能の比較が研究の中心である。

abstractIntegrating genomic, hyperspectral imaging (HSI), and environmental data enhances wheat yield predictions, with HSI providing detailed spectral insights for predicting complex grain yield (GY) traits.

Bacterial network for precise plant stress detection and enhanced crop resilience. →

Understanding plant hormonal responses to stress and their transport dynamics remains challenging, limiting advancements in enhancing plant resilience. Our study presents a novel approach that utilizes genetically engineered bacteria (GEB) as molecular transceivers within plants, aiming to develop revolutionary agricultural biosensors. We focus on abscisic acid (ABA), a key hormone for plant growth and stress response. We propose using Escherichia coli (E. coli) engineered with PYR1-derived receptors that exhibit high affinity for ABA, triggering a bioluminescent response. Simulations investigate the detection time for ABA, bacterial diffusion within plant roots, advection effects through shoots, and chemotaxis in response to attractant gradients in leaves. Results indicate that higher ABA concentrations correlate with shorter response times, with an average of 431.52 s based on bioluminescence. The average internalization time for bacteria through a plant root area of 2 µm 2 during the rhizophagy process is estimated at 1220.12 s. Simulations also assess bacterial movement through shoots, the impact of advection, and chemotactic responses. These findings highlight the complex interplay between plant signaling and microbial communities, validating the efficacy of our bacterial-based sensor approach and opening new avenues for agricultural biosensor technology.

Why it matches plant phenotyping methods植物内ABAを生物発光で検出する遺伝子改変細菌センサーを開発・シミュレーション検証しており、植物ストレス状態の取得手法が中心である。

abstractOur study presents a novel approach that utilizes genetically engineered bacteria (GEB) as molecular transceivers within plants, aiming to develop revolutionary agricultural biosensors.

Targeted integrating hyperspectral and metabolomic data with spectral indices and metabolite content models for efficient salt-tolerant phenotype discrimination in Medicago truncatula . →

Plant phenomics has made significant progress recently, with new demand to move from external characterization to internal exploration through data combination. Hyperspectral and metabolomic data, with cause-and-effect relationship, are given priority for integration. However, few efficient integrating methods are available. Here, we showed the way to explore hyperspectral data through combining with upper-level metabolomic data and perform higher-level-data-guided dimension reduction in target-trait-oriented manner to obtain high analysis efficiency. To verify its feasibility, two-stage pipeline combining hyperspectral and metabolic data was designed to discriminate salt-tolerant phenotype for Medicago truncatula mutants. Centered on salt tolerance, data are combined through constructing metabolite-based spectral indices outlining tolerance-related metabolic changes in primary screening, and models converting hyperspectral data to metabolite content for detailed characterizing in secondary screening. Target phenotype could be discriminated after five-day salt-treatment, much earlier than phenotypic difference appearance‌. 20 mutants with salt-tolerant phenotype were successfully identified from about 1000 mutants, almost tripled that of unintegrated analysis. Accuracy rate, confirmed with salt-tolerance analysis for experimental verification, reached 90 ​%, which can be optimized to 100 ​% theoretically utilizing results from hierarchical-clustering-assisted Principal Component Analysis. Mutant-screening pipeline provided here is a practical example for targeted data integration and data mining under the guide of upper-layer omic data. Targeted combination of phenomic and metabolomic data provides the ability for accurate phenotype discrimination and prediction from both external and internal aspects, providing a powerful tool for phenotype selection in new-generation crop breeding.

Why it matches plant phenotyping methods高耐塩性表現型識別のため、ハイパースペクトルデータとメタボロームを統合した二段階フェノタイピング・スクリーニング手法を開発し、実験検証している。

abstracttwo-stage pipeline combining hyperspectral and metabolic data was designed to discriminate salt-tolerant phenotype for Medicago truncatula mutants.

Drone-based dataset of annotated sunflower images from Bangladesh. →

Accurate and automated detection of sunflower plants, along with assessments of their growth stages and health conditions, is crucial for enabling precision agriculture and improving crop management. In this work, we present a drone-based dataset of annotated sunflower images, derived from high-resolution videos captured at two distinct locations in Bangladesh. The original dataset comprises 1649 images extracted from drone footage of the BARI Surjomukhi-3 variety under various orientations, health conditions, and weather scenarios. After meticulous annotation using the Roboflow platform and augmentation with seven distinct techniques, the dataset expanded to 4286 images in Pascal VOC format. Detailed metadata-including geospatial coordinates, timestamped acquisition conditions, and camera settings-accompanies the dataset to support reproducibility and model generalization. By offering a comprehensive suite of annotated and augmented images, this dataset provides a valuable resource for developing and refining computer vision models geared toward sunflower detection, maturity evaluation, and yield prediction, ultimately advancing sustainable farming practices and decision-making tools in agricultural research.

Why it matches plant phenotyping methodsヒマワリ画像を注釈付きデータセットとして構築し、成長段階・健康状態・成熟度などの植物状態推定を支援することが中心であり、再利用可能な画像ベース表現型データセットに該当する。

abstractwe present a drone-based dataset of annotated sunflower images

Non-Invasive, Bioluminescence-Based Visualisation and Quantification of Bacterial Infections in Arabidopsis Over Time. →

Plant-pathogenic bacteria colonise their hosts using various strategies, exploiting both natural openings and wounds in leaves and roots. The vascular pathogen Xanthomonas campestris pv. campestris (Xcc) enters its host through hydathodes, organs at the leaf margin involved in guttation. Subsequently, Xcc breaches the hydathode-xylem barrier and progresses into the xylem vessels causing systemic disease. To elucidate the mechanisms that underpin the different stages of an Xcc infection, a need exists to image bacterial progression in planta in a non-invasive manner. Here, we describe a phenotyping setup and Python image analysis pipeline for capturing 16 independent Xcc infections in Arabidopsis thaliana plants in parallel over time. The setup combines an RGB camera for imaging disease symptoms and an ultrasensitive CCD camera for monitoring bacterial progression inside leaves using bioluminescence. The method reliably quantified bacterial growth in planta for two bacterial species, that is, vascular Xcc and the mesophyll pathogen Pseudomonas syringae pv. tomato (Pst). The camera resolution allowed Xcc imaging already in the hydathodes, yielding reproducible data for the first stages prior to the systemic infection. Data obtained through the image analysis pipeline was robust and validated findings from other bioluminescence imaging methods, while requiring fewer samples. Moreover, bioluminescence was reliably detected within 5 min, offering a significant time advantage over our previously reported method with light-sensitive films. Thus, this method is suitable to quantify the resistance level of a large number of Arabidopsis thaliana accessions and mutant lines to different bacterial strains in a non-invasive manner for phenotypic screenings.

Why it matches plant phenotyping methods植物感染を非侵襲的に画像化・定量するフェノタイピング装置とPython解析パイプラインを開発し、複数の細菌感染で検証しているため、方法が中心的です。

abstractHere, we describe a phenotyping setup and Python image analysis pipeline for capturing 16 independent Xcc infections in Arabidopsis thaliana plants in parallel over time.

High-Throughput Resistance Phenotyping of Banana ( Musa spp.) against Radopholus similis . →

Radopholus similis severely damages banana roots causing significant yield losses. Field screening for resistance is labor intensive and inconsistent due to environmental variation and mixed nematode populations. The screenhouse offers a controlled environment but is limited by the time needed for root development and variation in plant growth. We developed and validated a high-throughput in vitro method for phenotyping banana resistance to R. similis using sand-Murashige and Skoog (MS) media. Tissue culture plantlets grown in sterilized sand-MS were inoculated with 50 female R. similis after root development and nematodes extracted eight weeks after inoculation to calculate the reproduction factor (RF). Although RF values were higher for in vitro than in the screenhouse, accession responses showed similar trends under both conditions. The in vitro method was rapid, cost-effective with higher throughput, accelerating phenotyping and enabling rapid assessment of banana accessions for breeding programs. Some accessions responded differently to the two methods indicating that additional methods, such as root necrosis scores are important to confirm resistance. This study is the first in vitro-based demonstration of phenotyping for nematode resistance using modified sand-MS media with improved root development and pathogen interactions.

Why it matches plant phenotyping methodsバナナの線虫抵抗性という植物状態を評価する高スループットin vitroフェノタイピング法を開発・検証し、既存のスクリーンハウス法と比較しているため、方法が研究の中心である。

abstractWe developed and validated a high-throughput in vitro method for phenotyping banana resistance to R. similis using sand-Murashige and Skoog (MS) media.

High‐throughput phenotyping of stay‐green in a sorghum breeding program using unmanned aerial vehicles and machine learning →

Abstract As climate change continues to influence global weather patterns, the frequency and severity of drought conditions are expected to increase, posing a significant challenge to crop production. In sorghum ( Sorghum bicolor L. Moench), a key cereal crop, the stay‐green trait is of particular importance as a measure of how well a genotype can tolerate post‐anthesis drought conditions, which are critical for harvestable yield. Despite its importance, there is a pressing need for a more efficient, accurate, and precise method to phenotype stay‐green in sorghum to enhance breeding efforts. To address this need, this study explores the application of random forest and XGBoost machine learning models for phenotyping the stay‐green trait in sorghum. These models provide quantitative measurements that have the potential to enhance genomic studies and offer additional benefits. Although correlations with vegetation indices were occasionally high, they were not sufficiently reliable to be used exclusively. The machine learning models, in contrast, showed high percentages of genetic variation explained and had high repeatability. The values generated by these algorithms enable plant breeders to efficiently make selections in their stay‐green breeding programs. Further research is needed to assess the robustness of these models across different environments and genetic material. Additionally, comparing these models with other machine learning approaches will help determine if decision tree‐based models are the most effective for this application. Overall, the models presented in this study serve as a promising foundation for improving the efficiency of stay‐green breeding programs in sorghum, but they require further validation and comparison with alternative approaches.

Why it matches plant phenotyping methodsソルガムのstay-green形質をUAV画像と機械学習で定量化する手法を開発・評価しており、表現型取得・抽出が研究の中心である。反復性や遺伝的変異の説明率も評価している。

abstractthere is a pressing need for a more efficient, accurate, and precise method to phenotype stay‐green in sorghum

Temporal field phenomics of transgenic maize events subjected to drought stress: Cross‐validation scenarios and machine learning models →

Abstract Global climate change has driven breeding programs to develop abiotic stress‐resilient plant varieties. Traditionally, assessing drought resilience involves labor‐intensive and time‐consuming processes. This study used an unmanned aerial system (UAS) to predict key phenotyping traits in maize ( Zea mays L.) and monitor plant response to drought during the crop cycle. We grew transgenic maize hybrids in two trials, one irrigated and another subjected to drought stress, and used a drone equipped with red–green–blue (RGB) and multispectral sensors to capture images of the plots over time. Machine learning models and various prediction scenarios revealed significant correlations between vegetation indices over time. Interestingly, the RGB sensor outperformed the multispectral sensor in trait prediction. Prediction accuracy across scenarios with untested genotypes and environments ranged from 0.40 to 0.70 for grain yield, 0.43 to 0.69 for days to anthesis, 0.51 to 0.67 for days to silking, and 0.35 to 0.57 for plant height. Ridge and random forest models consistently delivered the most accurate predictions across traits and environments. The vegetation indices normalized green–red difference index, VARI, and RCC also effectively predicted and captured the plant response to drought. This study highlights the value of UAS phenotyping as a practical tool for assessing abiotic stress due to its straightforward implementation.

Why it matches plant phenotyping methodsUASによるRGB・マルチスペクトル画像と機械学習で、作物形質および干ばつ応答を予測するフェノタイピング手法を、複数環境・遺伝子型で検証しているため。

abstractThis study used an unmanned aerial system (UAS) to predict key phenotyping traits in maize ( Zea mays L.) and monitor plant response to drought during the crop cycle.

Cracking susceptibility of full-sibs of a cross of a cracking tolerant and cracking susceptible sweet cherry: Relation to cuticle characteristics, microcracking and calcium. →

Rain cracking compromises quality and quantity of sweet cherries worldwide. Cracking susceptibility differs among genotypes. The objective was to (1) phenotype the progeny of a cross between a tolerant and a susceptible sweet cherry cultivar for cuticle mass per unit area, strain release on cuticle isolation, cuticular microcracking and calcium/dry mass ratio and (2) relate these characteristics to cracking susceptibilities evaluated in laboratory immersion assays and published multiyear field observations. Mass of the dewaxed cuticle per unit area and strain release upon cuticle isolation were significantly related to cracking susceptibility in lab or field. Cuticular microcracking in the stylar end region as indexed by infiltration with acridine orange was more severe in susceptible than in tolerant genotypes and significantly correlated with susceptibility to cracking in lab and field. The Ca/dry mass ratio was lower (-8%) for susceptible than for tolerant genotypes. Fruit that cracked early had less Ca than those that cracked later. Only the Ca/dry mass ratio of the stylar end region was significantly correlated with cracking susceptibility in the field. Based on stepwise regression analyses microcracking of the cuticle accounted for most of the cracking susceptibilities in field and lab (partial r2 = 0.331 to 0.338 for field vs. r2 = 0.326 to 0.453 for lab). The variability in cracking susceptibility accounted for increased to a r2 = 0.571 (lab) when adding mass of dewaxed cuticle, up to r2 = 0.421 (field) when adding the Ca/dry mass ratio in the stylar end region or up to r2 = 0.478 (field) when entering the strain release on isolation into the model. A protocol for phenotyping is suggested that allows larger progenies to be phenotyped for microcracking, DCM mass and strain release.

Why it matches plant phenotyping methodsサクランボ果実の微細亀裂、クチクラ質量、ひずみ解放などを用いた表現型評価を扱い、大規模後代を評価するためのフェノタイピングプロトコルを提案しているため、方法が中心的である。

abstractThe objective was to (1) phenotype the progeny of a cross between a tolerant and a susceptible sweet cherry cultivar for cuticle mass per unit area, strain release on cuticle isolation, cuticular microcracking and calcium/dry mass ratio and (2) relate these characteristics to cracking susceptibilities evaluated in laboratory immersion assays and published multiyear field observations.

CPDMS: a database system for crop physiological disorder management →

Abstract As the importance of precision agriculture grows, scalable and efficient methods for real-time data collection and analysis have become essential. In this study, we developed a system to collect real-time crop images, focusing on physiological disorders in tomatoes. This system systematically collects crop images and related data, with the potential to evolve into a valuable tool for researchers and agricultural practitioners. A total of 58 479 images were produced under stress conditions, including bacterial wilt (BW), Tomato Yellow Leaf Curl Virus (TYLCV), Tomato Spotted Wilt Virus (TSWV), drought, and salinity, across seven tomato varieties. The images include front views at 0 degrees, 120 degrees, 240 degrees, and top views and petiole images. Of these, 43 894 images were suitable for labeling. Based on this, 24 000 images were used for AI model training, and 13 037 images for model testing. By training a deep learning model, we achieved a mean Average Precision (mAP) of 0.46 and a recall rate of 0.60. Additionally, we discussed data augmentation and hyperparameter tuning strategies to improve AI model performance and explored the potential for generalizing the system across various agricultural environments. The database constructed in this study will serve as a crucial resource for the future development of agricultural AI. Database URL: https://crops.phyzen.com/

Why it matches plant phenotyping methodsトマトの生理障害・病害を対象に画像収集データベースと深層学習解析モデルを開発しており、植物状態の取得・推定手法が研究の中心である。

titleCPDMS: a database system for crop physiological disorder management

Nitrogen response and growth trajectory of sorghum CRISPR-Cas9 mutants using high-throughput phenotyping →

Inorganic nitrogen (N) fertilizer has emerged as one of the key factors driving increased crop yields in the past several decades. However, the overuse of chemical N fertilizer has led to severe ecological and environmental burdens. Understanding how crops respond to N fertilizer has become a central topic in plant science and plant genetics, with the ultimate goal of enhancing N use efficiency (NUE) in crop production. As one of the most essential macronutrients, N significantly influences crop performance across different developmental stages of plants, and phenotypic traits result from the cumulative effects of genetic factors, prevailing environmental conditions (specifically N availability), and their complex interactions. Previous studies have selected a set of genes potentially affecting Sorghum nitrogen responsiveness to be characterized. The knockout mutants of these genes are generated using the CRISPR-Cas9 technique. Using a LemnaTec plant imaging system, this study obtained time series imagery data from 29 to 130 d after sowing (DAS) for these CRISPR-edited mutants under high N and low N greenhouse conditions. After imagery data analysis, temporal pixel count and greenness index traits were extracted as a proxy of plant growth and N responses, which, subsequently, were modeled by mathematical functions, allowing us to estimate seven key parameters from the growth curves. Our findings revealed that the wildtype and the edited sorghum lines exhibited differences in N responses for several of the key growth-related parameters, with the Edit 1 showing especially reduced sensitiveness to use the available N resources. This high-throughput N phenotyping pipeline paves the way for a better understanding of the N responses of edited lines in a dynamic manner and sheds light on further improvements in crop NUE.

Why it matches plant phenotyping methodsLemnaTec画像を用いた時系列の植物表現型取得と、画素数・緑色度および成長曲線パラメータの抽出から成る高スループット表現型パイプラインが研究の中心である。

abstractUsing a LemnaTec plant imaging system, this study obtained time series imagery data from 29 to 130 d after sowing (DAS) for these CRISPR-edited mutants under high N and low N greenhouse conditions.

Phenotype prediction in plants is improved by integrating large-scale transcriptomic datasets. →

Research on the dynamic expression of genes in plants is important for understanding different biological processes. We used the large amounts of transcriptomic data from various plant sample sources that are publicly available to investigate whether the expression levels of a subset of highly variable genes (HVGs) can be used to accurately identify the phenotypes of plants. Using maize ( Zea mays L.) as an example, we built machine learning (ML) models to predict phenotypes using a gene expression dataset of 21 612 bulk RNA sequencing samples. We showed that the ML models achieved excellent prediction accuracy using only the HVGs to identify different phenotypes, including tissue types, developmental stages, cultivars and stress conditions. By ML models, several important functional genes were found to be associated with different phenotypes. We performed a similar analysis in rice ( Orzya sativa L.) and found that the ML models could be generalized across species. However, the models trained from maize did not perform well in rice, probably because of the expression divergence of the conserved HVGs between the two species. Overall, our results provide an ML framework for phenotype prediction using gene expression profiles, which may contribute to precision management of crops in agricultural practices.

Why it matches plant phenotyping methods遺伝子発現データから植物の組織、発育段階、品種、ストレス状態を予測する機械学習フレームワークを開発しており、表現型推定手法が研究の中心である。

abstractwe built machine learning (ML) models to predict phenotypes using a gene expression dataset of 21 612 bulk RNA sequencing samples.

Nitrogen response and growth trajectory of sorghum CRISPR-Cas9 mutants using high-throughput phenotyping →

ABSTRACT Inorganic nitrogen (N) fertilizer has emerged as one of the key factors driving increased crop yields in the past several decades; however, the overuse of chemical N fertilizer has led to severe ecological and environmental burdens. Understanding how crops respond to N fertilizer has become a central topic in plant science and plant genetics, with the ultimate goal of enhancing N use efficiency (NUE) in crop production. As one of the most essential macronutrients, N significantly influences crop performance across different developmental stages of plant, phenotypic traits result from the accumulative effects of genetic factors, prevailing environmental conditions (specifically N availability), and their complex interactions. To characterize the targeting N-responsiveness and growth trajectory, we employed CRISPR-Cas9 technique to generate sorghum mutants using CRISPR technology. Using a LemnaTec plant imaging system, we obtained time series imagery data from 29 to 130 days after sowing (DAS) for these CRISPR-edited mutants under high N and low N greenhouse conditions. After imagery data analysis, we extracted a number of morphological and greenness index traits as a proxy of plant growth and N responses. Subsequently, we employed two different methods to model the temporal N-responsive traits, allowing us to estimate seven key parameters from the growth curve. Our findings revealed that the wildtype and the edited sorghum lines exhibited differences in N responses for several of the key growth-related parameters. The high-throughput N phenotyping pipeline paves the way for a better understanding of the N responses of edited lines in a dynamic manner and sheds light on further improvements in crop NUE.

Why it matches plant phenotyping methodsLemnaTec画像による時系列形質取得と成長曲線モデリングを組み合わせた高スループット表現型解析パイプラインが、研究の主要な技術的要素として記述されています。

abstractUsing a LemnaTec plant imaging system, we obtained time series imagery data from 29 to 130 days after sowing (DAS) for these CRISPR-edited mutants under high N and low N greenhouse conditions.

Phenomics-assisted genetic dissection and molecular design of drought resistance in rice →

Dissecting the drought resistance (DR) mechanism and designing drought-resistant rice varieties are promising strategies to address the challenge of climate change. Here, we selected a typical drought-avoidant (DA) variety IRAT109 and drought-tolerant (DT) variety Hanhui15 as the parents to develop a stable recombinant inbred line (RIL) population (F 8 , 1,262 lines). The de novo assembled genomes of both parents were released. Through re-sequencing of the RIL population, a set of 1,189,216 reliable SNPs were obtained and used for constructing a dense genetic map. Using both aboveground and underground phenomic platforms and multimodal cameras, we captured 139,040 image-based traits (i-traits) of whole plant’s phenotypes in response to drought stress throughout entire rice growth period and identified 32,586 drought-responsive quantitative trait loci (QTLs) including 2,097 unique QTLs. The QTLs related to panicle i-traits occurred on the middle of chromosome 8 over 600 times, while the QTLs related to leaf i-traits on the 5’ end of chromosome 3 over 800 times, indicating potential effect of these QTLs on plant phenotypes. We chose three candidate genes ( OsMADS50, OsGhd8, OsSAUR11 ) related to leaf, panicle, and root traits respectively and verified their functions in resisting drought. Gene OsMADS50 was found to negatively regulate DR by modulating leaf dehydration, grain size, and root downward growth. Furthermore, a total of 18 and 21 composite QTLs significantly related to grain weight and plant biomass were screened from 597 lines in RIL population under drought conditions in field experiments, and composite QTL region was highly overlapped (76.9%) with known DR gene region. Based on three candidate DR genes, we proposed the haplotype design suitable for different environments and breeding objectives. This study provides a valuable reference for multi-modal and time-series phenomic analyses, deciphers the genetic mechanism of DA and DT rice varieties, and offers a molecular navigation map for breeding DR variety.

Why it matches plant phenotyping methods地下・地上フェノミックプラットフォームとマルチモーダルカメラで全生育期間の画像形質を大量取得しており、フェノタイピング手法の適用と技術的ワークフローが研究の中核です。

abstractUsing both aboveground and underground phenomic platforms and multimodal cameras, we captured 139,040 image-based traits (i-traits) of whole plant’s phenotypes in response to drought stress throughout entire rice growth period

LIDAR-Based Phenotyping for Drought Response and Drought Tolerance in Potato →

As climate changes, maintenance of yield stability requires efficient selection for drought tolerance. Drought-tolerant cultivars have been successfully but slowly bred by yield-based selection in arid environments. Marker-assisted selection accelerates breeding but is less effective for polygenic traits. Therefore, we investigated a selection based on phenotypic markers derived from automatic phenotyping systems. Our trial comprised 64 potato genotypes previously characterised for drought tolerance in ten trials representing Central European drought stress scenarios. In two trials, an automobile LIDAR system continuously monitored shoot development under optimal (C) and reduced (S) water supply. Six 3D images per day provided time courses of plant height (PH), leaf area (A3D), projected leaf area (A2D) and leaf angle (LA). The evaluation workflow employed logistic regression to estimate initial slope (k), inflection point (Tm) and maximum (Mx) for the growth curves of PH and A2D. Genotype × environment interaction affected all parameters significantly. Tm(A2D)ₛ and Mx(A2D)ₛ correlated significantly positive with drought tolerance, and Mx(PH)ₛ correlated negatively. Drought tolerance was not associated with LAc, but correlated significantly with the LAₛ during late night and at dawn. Drought-tolerant genotypes had a lower LAₛ than drought-sensitive genotypes, thus resembling unstressed plants. The decision tree model selected Tm(A2D)ₛ and Mx(PH)c as the most important parameters for tolerance class prediction. The model predicted sensitive genotypes more reliably than tolerant genotype and may thus complement the previously published model based on leaf metabolites/transcripts.

Why it matches plant phenotyping methods自動LIDARによる連続3D画像取得と、植物形態・成長形質の抽出および解析ワークフローが、乾燥耐性評価の中心的手法として用いられている。

abstractwe investigated a selection based on phenotypic markers derived from automatic phenotyping systems.

Anomaly Detection Utilizing One-Class Classification—A Machine Learning Approach for the Analysis of Plant Fast Fluorescence Kinetics →

The analysis of fast fluorescence kinetics, specifically through the JIP test, is a valuable tool for identifying and characterizing plant stress. However, interpreting OJIP data requires a comprehensive understanding of their underlying theory. This study proposes a Machine Learning-based approach using a One-Class Support Vector Machine anomaly detection model to effectively categorize OJIP measurements into “normal”, representing healthy plants, and “anomalies”. This approach was validated using a previously published dataset. A subgroup of the identified “anomalies” was clearly linked to stress-induced reductions in photosynthesis. Furthermore, the percentage of these “anomalies” showed a meaningful correlation with both the progression and severity of stress. The results highlight the still largely unexploited potential of Machine Learning in OJIP analysis.

Why it matches plant phenotyping methods植物の高速蛍光 kinetics（OJIP）からストレス状態を抽出する機械学習手法を開発し、既存データセットで検証しており、フェノタイピング手法が中心である。

abstractThis study proposes a Machine Learning-based approach using a One-Class Support Vector Machine anomaly detection model to effectively categorize OJIP measurements into “normal”, representing healthy plants, and “anomalies”.

Microscopy and transcriptomic datasets for investigating the drought-stress response and recovery in young and early senescent-old leaves from Brassica napus . →

The present dataset combines transcriptomic and microscopic analyses to investigate the responses of winter oilseed rape (WOSR, Brassica napus L., cultivar Aviso) to soil drought, with a focus on differences between young and early-senescent old leaves. For microscopy, 36 scans of 1 to 5 leaf cross-sections were acquired from paraffin-embedded leaf disc samples using a scanner with a 40x lens (Pannoramic Confocal, 3DHistech), capturing a large field of view (8-mm-long observed leaf tissue). The raw scanned cross-sections and analyzed images are available under doi.org/10.57745/RK5PM3 in the Recherche Data Gouvrepository. These high-quality scans enable the differentiation of mesophyll cells and tissues. Software analysis yielded a dataset with 54 selected cross-sectional areas, 291 delimited surfaces of palisade, spongy, and vessel tissues, and 11,136 individually delimited cells from the palisade and spongy layers. For transcriptomics, an Illumina Novaseq sequencer was used to generate 390 Gb of mRNA paired-end reads. The raw reads were filtered, mapped, and assigned to genes from the Brassica napus reference genome Darmor-bzh v10, which were subsequently used to identify differentially expressed genes (DEGs) and to perform gene ontology enrichment analysis. The raw reads are accessible under accession PRJNA939927 at the NCBI Sequence Read Archive (SRA). This high-quality dataset provides insights into the molecular mechanisms underlying oilseed rape's response to soil drought and may aid in the development of drought-tolerant cultivars. A total of 17,975 DEGs were identified between well-watered and severe drought conditions across the contrasted leaf developmental stages.

Why it matches plant phenotyping methods葉の断面画像を取得・解析し、組織面積や個別細胞などの植物形態形質を構造化した再利用可能なデータセットを提供しており、画像ベースの表現型取得が実質的な構成要素である。

abstractFor microscopy, 36 scans of 1 to 5 leaf cross-sections were acquired from paraffin-embedded leaf disc samples using a scanner with a 40x lens

In vivo detection of spectral reflectance changes associated with regulated heat dissipation mechanisms complements fluorescence quantum efficiency in early stress diagnosis. →

Early stress detection of crops requires a thorough understanding of the signals showing the very first symptoms of the alterations in the photosynthetic light reactions. Detection of the activation of the regulated heat dissipation mechanism is crucial to complement passively induced fluorescence to resolve ambuiguities in energy partitioning. Using leaf spectroscopy, we evaluated the capability of pigment spectral unmixing to calculate the fluorescence quantum efficiency (FQE) and simultaneously retrieve fast absorption changes in a drought and nitrogen deficiency experiment with tomato. In addition, active fluorescence measurements and pigment analyses of xanthophylls, carotenes and chlorophylls were conducted. We observed notable responses in noninvasive proximal sensing-retrieved FQE values under stress, but as expected, these alone were not enough to identify the constraints in photosynthetic efficiency. Reflectance-based detection of the 535-nm peak absorption change was able to complement FQE and indicate the activation of regulated heat dissipation for both stress treatments under growing light conditions. However, further complexity in the light harvesting energy regulation needs to be accounted for when considering additional light stress. Our results underscore the potential of complementary in vivo quantitative spectroscopy-based products in the early and nondestructive stress diagnosis of plants, marking the path for further applications.

Why it matches plant phenotyping methods葉分光法とスペクトルアンミキシングにより、植物のFQEや熱散逸に関連する吸収変化を非破壊・定量的に取得し、ストレス診断への有効性を評価しているため、植物生理フェノタイピング手法の応用・評価が中心です。

abstractUsing leaf spectroscopy, we evaluated the capability of pigment spectral unmixing to calculate the fluorescence quantum efficiency (FQE) and simultaneously retrieve fast absorption changes in a drought and nitrogen deficiency experiment with tomato.

MS-YOLOv8: multi-scale adaptive recognition and counting model for peanut seedlings under salt-alkali stress from remote sensing. →

Introduction The emergence rate of crop seedlings is an important indicator for variety selection, evaluation, field management, and yield prediction. To address the low recognition accuracy caused by the uneven size and varying growth conditions of crop seedlings under salt-alkali stress, this research proposes a peanut seedling recognition model, MS-YOLOv8. Methods This research employs close-range remote sensing from unmanned aerial vehicles (UAVs) to rapidly recognize and count peanut seedlings. First, a lightweight adaptive feature fusion module (called MSModule) is constructed, which groups the channels of input feature maps and feeds them into different convolutional layers for multi-scale feature extraction. Additionally, the module automatically adjusts the channel weights of each group based on their contribution, improving the feature fusion effect. Second, the neck network structure is reconstructed to enhance recognition capabilities for small objects, and the MPDIoU loss function is introduced to effectively optimize the detection boxes for seedlings with scattered branch growth. Results Experimental results demonstrate that the proposed MS-YOLOv8 model achieves an AP50 of 97.5% for peanut seedling detection, which is 12.9%, 9.8%, 4.7%, 5.0%, 11.2%, 5.0%, and 3.6% higher than Faster R-CNN, EfficientDet, YOLOv5, YOLOv6, YOLOv7, YOLOv8, and RT-DETR, respectively. Discussion This research provides valuable insights for crop recognition under extreme environmental stress and lays a theoretical foundation for the development of intelligent production equipment.

Why it matches plant phenotyping methodsUAVリモートセンシング画像からピーナッツ幼苗を認識・計数するモデルを開発し、検出性能を比較検証している。幼苗数・出現率という植物状態の推定が研究の中心である。

abstractthis research proposes a peanut seedling recognition model, MS-YOLOv8

Rice Responses to the Stem Borer Diatraea saccharalis (Lepidoptera: Crambidae) by Infrared-Thermal Imaging: Implications for Field Management →

Diatraea saccharalis (Fabricius) is one of the main pests of rice crops and its early detection, that is, before the plants show damage, is essential to avoid yield losses and define effective and rational control. This work aimed to model the infrared-thermal responses of rice cultivars to D. saccharalis infestation levels. Between 2019 and 2020, two experiments were conducted in a protected environment with the cultivars IR 40 and BR IRGA 409, which presented, in a previous study, different resistance reactions. Rice plants grown in pots were manually infested with first-instar larvae of D. saccharalis, from 0 to 10 caterpillars/plant, with the plants kept in cages covered with voile fabric throughout the test. With the adjustment of regression models, it was noticed that the leaf surface temperature is related to the level of infestation and could be used to detect which IR 40 is susceptible.

Why it matches plant phenotyping methods赤外線サーモグラフィーでイネ葉面温度から害虫感染レベルと感受性を推定する方法が研究の中心であり、植物状態の取得・推定に該当する。

abstractThis work aimed to model the infrared-thermal responses of rice cultivars to D. saccharalis infestation levels.

Heat stress analysis suggests a genetic basis for tolerance in Macrocystis pyrifera across developmental stages. →

Kelps are vital for marine ecosystems, yet the genetic diversity underlying their capacity to adapt to climate change remains unknown. In this study, we focused on the kelp Macrocystis pyrifera a species critical to coastal habitats. We developed a protocol to evaluate heat stress response in 204 Macrocystis pyrifera genotypes subjected to heat stress treatments ranging from 21 °C to 27 °C. Here we show that haploid gametophytes exhibiting a heat-stress tolerant (HST) phenotype also produced greater biomass as genetically similar diploid sporophytes in a warm-water ocean farm. HST was measured as chlorophyll autofluorescence per genotype, presented here as fluorescent intensity values. This correlation suggests a predictive relationship between the growth performance of the early microscopic gametophyte stage HST and the later macroscopic sporophyte stage, indicating the potential for selecting resilient kelp strains under warmer ocean temperatures. However, HST kelps showed reduced genetic variation, underscoring the importance of integrating heat tolerance genes into a broader genetic pool to maintain the adaptability of kelp populations in the face of climate change.

Why it matches plant phenotyping methods熱ストレス耐性という植物状態をクロロフィル自家蛍光で定量するプロトコルを開発しており、表現型取得法が研究の中心的要素として明示されている。

abstractWe developed a protocol to evaluate heat stress response in 204 Macrocystis pyrifera genotypes subjected to heat stress treatments ranging from 21 °C to 27 °C.

Artificial Intelligence Identification of Japonica Rice varieties Based on Raman Spectroscopic Identification Mechanism of Saline-alkali Tolerance →

Abstract Rice is regarded as the preferred crop for saline-alkali soil improvement by researchers. At present, the identification method for saline-alkali tolerance of rice varieties requires researcher to conduct tedious field investigations based on growth indicators. Therefore, there is an urgent need for an effective technical means to quickly and accurately identify saline-alkali tolerance of rice varieties. Study used 20 japonica rice varieties with three types of saline-alkali tolerance as test materials, by analyzing the identification mechanism of salt-alkali tolerance in Raman spectrum of japonica rice varieties, seven characteristic spectral peaks closely related to salt-alkali tolerance were identified. Various algorithms in Python are used for data standardization, baseline elimination, extraction of characteristic spectral peaks, detection of peaks characteristic information and data noise reduction. Three identification models were established to confirm the highest accuracy of CapsNets identification model, which could provide technical support and reference for breeding saline-alkali resistant japonica rice varieties.

Why it matches plant phenotyping methodsラマン分光とスペクトル処理・AIモデルによりイネ品種の塩類アルカリ耐性を推定する技術を開発・比較しており、表現型状態の取得・判定が研究の中心である。

abstractthere is an urgent need for an effective technical means to quickly and accurately identify saline-alkali tolerance of rice varieties

MV-Match: Multi-View Matching for Domain-Adaptive Identification of Plant Nutrient Deficiencies →

An early, non-invasive, and on-site detection of nutrient deficiencies is critical to enable timely actions to prevent major losses of crops caused by lack of nutrients. While acquiring labeled data is very expensive, collecting images from multiple views of a crop is straightforward. Despite its relevance for practical applications, unsupervised domain adaptation where multiple views are available for the labeled source domain as well as the unlabeled target domain is an unexplored research area. In this work, we thus propose an approach that leverages multiple camera views in the source and target domain for unsupervised domain adaptation. We evaluate the proposed approach on two nutrient deficiency datasets. The proposed method achieves state-of-the-art results on both datasets compared to other unsupervised domain adaptation methods. The dataset and source code are available at https://github.com/jh-yi/MV-Match.

Why it matches plant phenotyping methods植物の栄養欠乏状態を画像から推定するマルチビュー・ドメイン適応手法を提案し、2つのデータセットで評価しており、表現型取得・推定手法が中心です。

abstractwe thus propose an approach that leverages multiple camera views in the source and target domain for unsupervised domain adaptation.

Tolerance to spittlebugs ( Aeneolamia varia ) in Urochloa spp. and Megathyrsus maximus grasses: A dataset for plant damage phenotyping. →

This dataset results from controlled experiments that assess the tolerance of Urochloa spp. and Megathyrsus maximus grasses to nymphal and adult spittlebug damage, particularly from Aeneolamia varia , which significantly impacts forage production in Neotropical regions. Data were collected under standardized conditions using high-throughput phenotyping methods, integrating image-capture techniques and analyses to ensure precise and consistent data acquisition. The dataset serves as a foundational resource for developing and validating computer vision models aimed at automated phenotyping, enabling accurate and high-throughput assessment of plant tolerance to spittlebug damage. Researchers can use the dataset to benchmark and compare different methodologies for plant damage assessment, fostering standardization and reproducibility in phenotyping studies.

Why it matches plant phenotyping methods植物の害虫被害耐性を画像ベースで高スループット評価するデータセットであり、コンピュータビジョンモデルの開発・検証と手法比較を目的とするため、フェノタイピング手法が中心です。

titleA dataset for plant damage phenotyping.

ALPHA: A High Throughput System for Quantifying Growth In Aquatic Plants →

Abstract The need for more sustainable agricultural systems is becoming increasingly apparent. The global demand for agricultural products — food, feed, fuel and fiber — will continue to increase as the global population continues to grow. This challenge is compounded by climate change. Not only does a changing climate make it difficult to maintain stable yields but current agricultural systems are a major source of greenhouse gas emissions and continue to drive the problem further. Therefore, future agricultural systems must not only increase production but also significantly decrease negative environmental impacts. One approach to addressing this is to begin breeding and cultivating new plant species that have fundamental sustainability advantages over our existing crops. The Lemnaceae, a.k.a duckweeds, are one such species that have potential to increase output and reduce the negative environmental impacts of agricultural production. Herein we describe the Automated Lab-scale PHenotyping Apparatus, ALPHA, for high-throughput phenotyping of Lemnaceae. ALPHA is being used for selective breeding of one species, Lemna gibba , toward the goal of creating a new crop for use in sustainable agricultural systems. ALPHA can be used on many small aquatic plant species to assess growth rates in different environmental conditions. A proof of principle use case is demonstrated where ALPHA is used to determine saltwater tolerance of 6 different varieties of L. gibba .

Why it matches plant phenotyping methods小型水生植物の成長率を高スループットに定量する自動フェノタイピング装置を開発・実証しており、表現型取得法が研究の中心です。

abstractHerein we describe the Automated Lab-scale PHenotyping Apparatus, ALPHA, for high-throughput phenotyping of Lemnaceae.

Phenotyping of Drought-Stressed Poplar Saplings Using Exemplar-Based Data Generation and Leaf-Level Structural Analysis →

Drought stress is one of the main threats to poplar plant growth and has a negative impact on plant yield. Currently, high-throughput plant phenotyping has been widely studied as a rapid and nondestructive tool for analyzing the growth status of plants, such as water and nutrient content. In this study, a combination of computer vision and deep learning was used for drought-stressed poplar sapling phenotyping. Four varieties of poplar saplings were cultivated, and 5 different irrigation treatments were applied. Color images of the plant samples were captured for analysis. Two tasks, including leaf posture calculation and drought stress identification, were conducted. First, instance segmentation was used to extract the regions of the leaf, petiole, and midvein. A dataset augmentation method was created for reducing manual annotation costs. The horizontal angles of the fitted lines of the petiole and midvein were calculated for leaf posture digitization. Second, multitask learning models were proposed for simultaneously determining the stress level and poplar variety. The mean absolute errors of the angle calculations were 10.7° and 8.2° for the petiole and midvein, respectively. Drought stress increased the horizontal angle of leaves. Moreover, using raw images as the input, the multitask MobileNet achieved the highest accuracy (99% for variety identification and 76% for stress level classification), outperforming widely used single-task deep learning models (stress level classification accuracies of <70% on the prediction dataset). The plant phenotyping methods presented in this study could be further used for drought-stress-resistant poplar plant screening and precise irrigation decision-making.

Why it matches plant phenotyping methods画像解析と深層学習により、葉姿勢の定量化および干ばつストレス同定手法を開発・評価しており、植物表現型取得が研究の中心である。

abstractIn this study, a combination of computer vision and deep learning was used for drought-stressed poplar sapling phenotyping.

Enhancing Water-Deficient Potato Plant Identification: Assessing Realistic Performance of Attention-Based Deep Neural Networks and Hyperspectral Imaging for Agricultural Applications →

Hyperspectral imaging has emerged as a pivotal technology in agricultural research, offering a powerful means to non-invasively monitor stress factors, such as drought, in crops like potato plants. In this context, the integration of attention-based deep learning models presents a promising avenue for enhancing the efficiency of stress detection, by enabling the identification of meaningful spectral channels. This study assesses the performance of deep learning models on two potato plant cultivars exposed to water-deficient conditions. It explores how various sampling strategies and biases impact the classification metrics by using a dual-sensor hyperspectral imaging systems (VNIR -Visible and Near-Infrared and SWIR—Short-Wave Infrared). Moreover, it focuses on pinpointing crucial wavelengths within the concatenated images indicative of water-deficient conditions. The proposed deep learning model yields encouraging results. In the context of binary classification, it achieved an area under the receiver operating characteristic curve (AUC-ROC—Area Under the Receiver Operating Characteristic Curve) of 0.74 (95% CI: 0.70, 0.78) and 0.64 (95% CI: 0.56, 0.69) for the KIS Krka and KIS Savinja varieties, respectively. Moreover, the corresponding F1 scores were 0.67 (95% CI: 0.64, 0.71) and 0.63 (95% CI: 0.56, 0.68). An evaluation of the performance of the datasets with deliberately introduced biases consistently demonstrated superior results in comparison to their non-biased equivalents. Notably, the ROC-AUC values exhibited significant improvements, registering a maximum increase of 10.8% for KIS Krka and 18.9% for KIS Savinja. The wavelengths of greatest significance were observed in the ranges of 475–580 nm, 660–730 nm, 940–970 nm, 1420–1510 nm, 1875–2040 nm, and 2350–2480 nm. These findings suggest that discerning between the two treatments is attainable, despite the absence of prominently manifested symptoms of drought stress in either cultivar through visual observation. The research outcomes carry significant implications for both precision agriculture and potato breeding. In precision agriculture, precise water monitoring enhances resource allocation, irrigation, yield, and loss prevention. Hyperspectral imaging holds potential to expedite drought-tolerant cultivar selection, thereby streamlining breeding for resilient potatoes adaptable to shifting climates.

Why it matches plant phenotyping methodsジャガイモの水欠乏状態をハイパースペクトル画像と深層学習で識別し、性能評価および重要波長の同定を行っており、植物ストレス表現型の取得・抽出手法が中心である。

abstractHyperspectral imaging has emerged as a pivotal technology in agricultural research, offering a powerful means to non-invasively monitor stress factors, such as drought, in crops like potato plants.

High-Throughput Phenotyping using Computer Vision and Machine Learning →

High-throughput phenotyping refers to the non-destructive and efficient evaluation of plant phenotypes. In recent years, it has been coupled with machine learning in order to improve the process of phenotyping plants by increasing efficiency in handling large datasets and developing methods for the extraction of specific traits. Previous studies have developed methods to advance these challenges through the application of deep neural networks in tandem with automated cameras; however, the datasets being studied often excluded physical labels. In this study, we used a dataset provided by Oak Ridge National Laboratory with 1,672 images of Populus Trichocarpa with white labels displaying treatment (control or drought), block, row, position, and genotype. Optical character recognition (OCR) was used to read these labels on the plants, image segmentation techniques in conjunction with machine learning algorithms were used for morphological classifications, machine learning models were used to predict treatment based on those classifications, and analyzed encoded EXIF tags were used for the purpose of finding leaf size and correlations between phenotypes. We found that our OCR model had an accuracy of 94.31% for non-null text extractions, allowing for the information to be accurately placed in a spreadsheet. Our classification models identified leaf shape, color, and level of brown splotches with an average accuracy of 62.82%, and plant treatment with an accuracy of 60.08%. Finally, we identified a few crucial pieces of information absent from the EXIF tags that prevented the assessment of the leaf size. There was also missing information that prevented the assessment of correlations between phenotypes and conditions. However, future studies could improve upon this to allow for the assessment of these features.

Why it matches plant phenotyping methods植物画像からラベル情報を読み取り、画像分割・機械学習で葉形、色、斑点などの形態形質を抽出・分類する手法が研究の中心であり、植物フェノタイピング手法の開発・適用に該当する。

abstractimage segmentation techniques in conjunction with machine learning algorithms were used for morphological classifications

Quantifying Visual Differences in Drought-Stressed Maize through Reflectance and Data-Driven Analysis →

Environmental factors, such as drought stress, significantly impact maize growth and productivity worldwide. To improve yield and quality, effective strategies for early detection and mitigation of drought stress in maize are essential. This paper presents a detailed analysis of three imaging trials conducted to detect drought stress in maize plants using an existing, custom-developed, low-cost, high-throughput phenotyping platform. A pipeline is proposed for early detection of water stress in maize plants using a Vision Transformer classifier and analysis of distributions of near-infrared (NIR) reflectance from the plants. A classification accuracy of 85% was achieved in one of our trials, using hold-out trials for testing. Suitable regions on the plant that are more sensitive to drought stress were explored, and it was shown that the region surrounding the youngest expanding leaf (YEL) and the stem can be used as a more consistent alternative to analysis involving just the YEL. Experiments in search of an ideal window size showed that small bounding boxes surrounding the YEL and the stem area of the plant perform better in separating drought-stressed and well-watered plants than larger window sizes enclosing most of the plant. The results presented in this work show good separation between well-watered and drought-stressed categories for two out of the three imaging trials, both in terms of classification accuracy from data-driven features as well as through analysis of histograms of NIR reflectance.

Why it matches plant phenotyping methodsマルチスペクトル画像とVision Transformerを用いて、トウモロコシ個体の干ばつストレス状態を推定する解析パイプラインを開発・評価しており、表現型取得・抽出手法が研究の中心である。

abstractThis paper presents a detailed analysis of three imaging trials conducted to detect drought stress in maize plants using an existing, custom-developed, low-cost, high-throughput phenotyping platform.

Multi-scale characterisation of cold response reveals immediate and long-term impacts on cell physiology up to seed composition in sunflower. →

Early sowing can help summer crops escape drought and can mitigate the impacts of climate change on them. However, it exposes them to cold stress during initial developmental stages, which has both immediate and long-term effects on development and physiology. To understand how early night-chilling stress impacts plant development and yield, we studied the reference sunflower line XRQ under controlled, semi-controlled and field conditions. We performed high-throughput imaging of the whole plant parts and obtained physiological and transcriptomic data from leaves, hypocotyls and roots. We observed morphological reductions in early stages under field and controlled conditions, with a decrease in root development, an increase in reactive oxygen species content in leaves and changes in lipid composition in hypocotyls. A long-term increase in leaf chlorophyll suggests a stress memory mechanism that was supported by transcriptomic induction of histone coding genes. We highlighted DEGs related to cold acclimation such as chaperone, heat shock and late embryogenesis abundant proteins. We identified genes in hypocotyls involved in lipid, cutin, suberin and phenylalanine ammonia lyase biosynthesis and ROS scavenging. This comprehensive study describes new phenotyping methods and candidate genes to understand phenotypic plasticity better in response to chilling and study stress memory in sunflower.

Why it matches plant phenotyping methods全身部位のハイスループット画像化と新規フェノタイピング手法が明示され、低温応答の形態評価における手法が中心的に記述されている。

abstractWe performed high-throughput imaging of the whole plant parts and obtained physiological and transcriptomic data from leaves, hypocotyls and roots.

Soybean Canopy Stress Classification Using 3D Point Cloud Data →

Automated canopy stress classification for field crops has traditionally relied on single-perspective, two-dimensional (2D) photographs, usually obtained through top-view imaging using unmanned aerial vehicles (UAVs). However, this approach may fail to capture the full extent of plant stress symptoms, which can manifest throughout the canopy. Recent advancements in LiDAR technologies have enabled the acquisition of high-resolution 3D point cloud data for the entire canopy, offering new possibilities for more accurate plant stress identification and rating. This study explores the potential of leveraging 3D point cloud data for improved plant stress assessment. We utilized a dataset of RGB 3D point clouds of 700 soybean plants from a diversity panel exposed to iron deficiency chlorosis (IDC) stress. From this unique set of 700 canopies exhibiting varying levels of IDC, we extracted several representations, including (a) handcrafted IDC symptom-specific features, (b) canopy fingerprints, and (c) latent feature-based features. Subsequently, we trained several classification models to predict plant stress severity using these representations. We exhaustively investigated several stress representations and model combinations for the 3-D data. We also compared the performance of these classification models against similar models that are only trained using the associated top-view 2D RGB image for each plant. Among the feature-model combinations tested, the 3D canopy fingerprint features trained with a support vector machine yielded the best performance, achieving higher classification accuracy than the best-performing model based on 2D data built using convolutional neural networks. Our findings demonstrate the utility of color canopy fingerprinting and underscore the importance of considering 3D data to assess plant stress in agricultural applications.

Why it matches plant phenotyping methods3D点群と特徴抽出・分類モデルを用いてダイズ個体の鉄欠乏症ストレス重症度を推定し、2D画像手法と比較検証しており、植物表現型取得・推定法が中心である。

abstractThis study explores the potential of leveraging 3D point cloud data for improved plant stress assessment.

Towards an objective assessment of tree vitality: a case study based on 3D laser scanning →

Key message Analyzing fine branch length characteristics in beech trees using single-tree QSMs derived from laser scanning reveals insights into drought-induced changes in vitality, which include branch shedding and reduced shoot growth. Abstract Climate change causes increasing temperatures and precipitation anomalies, which result in deteriorations of tree health and declines in ecosystem services of forests. It is therefore crucial to monitor tree vitality to preserve forests and their functions. However, methods describing tree vitality in situ are lacking reproducibility or are too laborious. Thus, we tested a laser-scanning based approach, assuming that an objective measurement of a tree’s outer shape should reveal changes according to tree vitality. QSMs of similarly sized beech trees from stands with varying degrees of drought damage were used. Absolute and relative fine branch lengths, their ratio to lower order branches’ lengths and their progressions over relative height were targeted to identify fine branch dieback and reduced growth. The absolute fine branch length was significantly lower for less vital beech trees, especially within the upper crown, leading to a less top-heavy vertical distribution of fine branches and a reduced fine-to-base order branch length ratio. Hence, height-dependent characteristics of fine branch lengths differed between vitalities. We conclude that using fine branch length characteristics derived from QSMs can be helpful in vitality assessments of beech trees. Still, uncertainties with regard to the plotwise assessment and problems with QSM quality are present.

Why it matches plant phenotyping methods3DレーザースキャンとQSMから枝長形質を抽出し、樹木活力を客観評価する手法が研究の中心であるため。

abstractThus, we tested a laser-scanning based approach, assuming that an objective measurement of a tree’s outer shape should reveal changes according to tree vitality.

Evaluation of a low-cost staining method for improved visualization of sweet potato whitefly (Bemisia tabaci) eggs on multiple crop plant species →

Abstract Background The sweet potato whitefly ( Bemisia tabaci ) is a globally important insect pest that damages crops through direct feeding and by transmitting viruses. Current B. tabaci management revolves around the use of insecticides, which are economically and environmentally costly. Host plant resistance is a sustainable option to reduce the impact of whiteflies, but progress in deploying resistance in crops has been slow. A major obstacle is the high cost and low throughput of screening plants for B. tabaci resistance. Oviposition rate is a popular metric for host plant resistance to B. tabaci because it does not require tracking insect development through the entire life cycle, but accurate quantification is still limited by difficulties in observing B. tabaci eggs, which are microscopic and translucent. The goal of our study was to improve quantification of B. tabaci eggs on several important crop species: cassava, cowpea, melon, sweet potato and tomato. Results We tested a selective staining process originally developed for leafhopper eggs: submerging the leaves in McBryde’s stain (acetic acid, ethanol, 0.2% aqueous acid Fuchsin, water; 20:19:2:1) for three days, followed by clearing under heat and pressure for 15 min in clearing solution (LGW; lactic acid, glycerol, water; 17:20:23). With a less experienced individual counting the eggs, B. tabaci egg counts increased after staining across all five crops. With a more experienced counter, egg counts increased after staining on melons, tomatoes, and cowpeas. For all five crops, there was significantly greater agreement on egg counts across the two counting individuals after the staining process. The staining method worked particularly well on melon, where egg counts universally increased after staining for both counting individuals. Conclusions Selective staining aids visualization of B. tabaci eggs across multiple crop plants, particularly species where leaf morphological features obscure eggs, such as melons and tomatoes. This method is broadly applicable to research questions requiring accurate quantification of B. tabaci eggs, including phenotyping for B. tabaci resistance.

Why it matches plant phenotyping methods植物葉上のコナジラミ卵を染色して定量し、計数値と計数者間一致を改善する方法を評価しており、抵抗性フェノタイピングへの応用が明示された中心的な手法研究。

abstractThe goal of our study was to improve quantification of B. tabaci eggs on several important crop species: cassava, cowpea, melon, sweet potato and tomato.

Tradescantia response to air and soil pollution, stamen hair cells dataset and ANN color classification. →

Tradescantia plant is a complex system that is sensible to environmental factors such as water supply, pH, temperature, light, radiation, impurities, and nutrient availability. It can be used as a biomonitor for environmental changes; however, the bioassays are time-consuming and have a strong human interference factor that might change the result depending on who is performing the analysis. We have developed computer vision models to study color variations from Tradescantia clone 4430 plant stamen hair cells, which can be stressed due to air pollution and soil contamination. The study introduces a novel dataset, Trad-204, comprising single-cell images from Tradescantia clone 4430, captured during the Tradescantia stamen-hair mutation bioassay (Trad-SHM). The dataset contain images from two experiments, one focusing on air pollution by particulate matter and another based on soil contaminated by diesel oil. Both experiments were carried out in Curitiba, Brazil, between 2020 and 2023. The images represent single cells with different shapes, sizes, and colors, reflecting the plant's responses to environmental stressors. An automatic classification task was developed to distinguishing between blue and pink cells, and the study explores both a baseline model and three artificial neural network (ANN) architectures, namely, TinyVGG, VGG-16, and ResNet34. Tradescantia revealed sensibility to both air particulate matter concentration and diesel oil in soil. The results indicate that Residual Network architecture outperforms the other models in terms of accuracy on both training and testing sets. The dataset and findings contribute to the understanding of plant cell responses to environmental stress and provide valuable resources for further research in automated image analysis of plant cells. Discussion highlights the impact of turgor pressure on cell shape and the potential implications for plant physiology. The comparison between ANN architectures aligns with previous research, emphasizing the superior performance of ResNet models in image classification tasks. Artificial intelligence identification of pink cells improves the counting accuracy, thus avoiding human errors due to different color perceptions, fatigue, or inattention, in addition to facilitating and speeding up the analysis process. Overall, the study offers insights into plant cell dynamics and provides a foundation for future investigations like cells morphology change. This research corroborates that biomonitoring should be considered as an important tool for political actions, being a relevant issue in risk assessment and the development of new public policies relating to the environment.

Why it matches plant phenotyping methodsTradescantiaの雄しべ毛細胞の色を画像から自動分類・計数するコンピュータビジョン手法とデータセットを開発・評価しており、植物ストレス応答という細胞状態の取得が中心である。

abstractWe have developed computer vision models to study color variations from Tradescantia clone 4430 plant stamen hair cells

IHUP: An Integrated High-Throughput Universal Phenotyping Software Platform to Accelerate Unmanned-Aerial-Vehicle-Based Field Plant Phenotypic Data Extraction and Analysis →

With the threshold for crop growth data collection having been markedly decreased by sensor miniaturization and cost reduction, unmanned aerial vehicle (UAV)-based low-altitude remote sensing has shown remarkable advantages in field phenotyping experiments. However, the requirement of interdisciplinary knowledge and the complexity of the workflow have seriously hindered researchers from extracting plot-level phenotypic data from multisource and multitemporal UAV images. To address these challenges, we developed the Integrated High-Throughput Universal Phenotyping (IHUP) software as a data producer and study accelerator that included 4 functional modules: preprocessing, data extraction, data management, and data analysis. Data extraction and analysis requiring complex and multidisciplinary knowledge were simplified through integrated and automated processing. Within a graphical user interface, users can compute image feature information, structural traits, and vegetation indices (VIs), which are indicators of morphological and biochemical traits, in an integrated and high-throughput manner. To fulfill data requirements for different crops, extraction methods such as VI calculation formulae can be customized. To demonstrate and test the composition and performance of the software, we conducted case-related rice drought phenotype monitoring experiments. In combination with a rice leaf rolling score predictive model, leaf rolling score, plant height, VIs, fresh weight, and drought weight were efficiently extracted from multiphase continuous monitoring data. Despite the significant impact of image processing during plot clipping on processing efficiency, the software can extract traits from approximately 500 plots/min in most application cases. The software offers a user-friendly graphical user interface and interfaces for customizing or integrating various feature extraction algorithms, thereby significantly reducing barriers for nonexperts. It holds the promise of significantly accelerating data production in UAV phenotyping experiments.

Why it matches plant phenotyping methodsUAV画像から形態・生理関連形質を抽出・解析する統合ソフトウェア基盤の開発と性能実証が中心であり、植物フェノタイピング手法として明確に適格です。

abstractwe developed the Integrated High-Throughput Universal Phenotyping (IHUP) software as a data producer and study accelerator that included 4 functional modules: preprocessing, data extraction, data management, and data analysis.

Longitudinal genome-wide association study reveals early QTL that predict biomass accumulation under cold stress in sorghum. →

Introduction: is a promising cellulosic feedstock crop for bioenergy due to its high biomass yields. However, early growth phases of sorghum are sensitive to cold stress, limiting its planting in temperate environments. Cold adaptability is crucial for cultivating bioenergy and grain sorghum at higher latitudes and elevations, or for extending the growing season. Identifying genes and alleles that enhance biomass accumulation under early cold stress can lead to improved sorghum varieties through breeding or genetic engineering. Methods: We conducted image-based phenotyping on 369 accessions from the sorghum Bioenergy Association Panel (BAP) in a controlled environment with early cold treatment. The BAP includes diverse accessions with dense genotyping and varied racial, geographical, and phenotypic backgrounds. Daily, non-destructive imaging allowed temporal analysis of growth-related traits and water use efficiency (WUE). A genome-wide association study (GWAS) was performed to identify genomic intervals and genes associated with cold stress response. Results: The GWAS identified transient quantitative trait loci (QTL) strongly associated with growth-related traits, enabling an exploration of the genetic basis of cold stress response at different developmental stages. This analysis of daily growth traits, rather than endpoint traits, revealed early transient QTL predictive of final phenotypes. The study identified both known and novel candidate genes associated with growth-related traits and temporal responses to cold stress. Discussion: The identified QTL and candidate genes contribute to understanding the genetic mechanisms underlying sorghum's response to cold stress. These findings can inform breeding and genetic engineering strategies to develop sorghum varieties with improved biomass yields and resilience to cold, facilitating earlier planting, extended growing seasons, and cultivation at higher latitudes and elevations.

Why it matches plant phenotyping methods日次の非破壊画像計測を用いて成長関連形質とWUEを時系列で抽出し、早期表現型を解析しており、画像ベースの植物表現型取得が研究の主要な方法として記述されている。

abstractWe conducted image-based phenotyping on 369 accessions from the sorghum Bioenergy Association Panel (BAP) in a controlled environment with early cold treatment.

Precision Phenotyping of Wild Rocket (Diplotaxis tenuifolia) to Determine Morpho-Physiological Responses under Increasing Drought Stress Levels Using the PlantEye Multispectral 3D System →

The PlantEye multispectral scanner is an optoelectrical sensor automatically applied to a mechatronic platform that allows the non-destructive, accurate, and high-throughput detection of morphological and physiological plant parameters. In this study, we describe how the advanced phenotyping platform precisely assesses changes in plant architecture and growth parameters of wild rocket salad (Diplotaxis tenuifolia L. [DC.]) under drought stress conditions. Four different irrigation supply levels from moderate to severe, required to keep 100, 70, 50, and 30% of the water-holding capacity, were adopted. Growth rate and plant architecture were recorded through the digital measure of biomass, leaf area, Canopy Light Penetration Depth, five convex hull traits, plant height, Surface Angle Average, and Voxel Volume Total. Vegetation color assessments included hue, lightness, and saturation. Vegetation and senescence indices were calculated from canopy reflectance in the red (620–645 nm), green (530–540 nm), blue (peak wavelength 460–485 nm), near-infrared (820–850 nm), and 3D laser (940 nm) ranges. The temperature, relative humidity, and solar radiation of the environment were also recorded. Overall, morphological parameters, color, multispectral data, and vegetation indices provided over 7200 data points through daily scans over three weeks of cultivation. Although a general decrease in growth parameters with increasing stress severity was observed, plants were able to maintain the same morpho-physiological performances as the control during the early growth stages, keeping both 70% and 50% of the total water-holding capacity. Among indices, the Normalized Differential Vegetation Index (NDVI) contributed the most to the differentiation between different stress levels during the cultivation cycle. Across the 3 weeks of growth, statistically significant differences were observed for all traits except for the Saturation Average. Comparisons with respect to the control highlighted the strong impact of drought stress on morphological plant traits. This study provided meaningful insights into the health status of wild rocket salad under increasing drought stress.

Why it matches plant phenotyping methodsPlantEye multispectral3Dプラットフォームを用いた植物形態・生理形質の高スループット取得が研究の中心であり、乾燥ストレス実験への実質的なフェノタイピング適用である。

abstractThe PlantEye multispectral scanner is an optoelectrical sensor automatically applied to a mechatronic platform that allows the non-destructive, accurate, and high-throughput detection of morphological and physiological plant parameters.

Multimodal deep learning-based drought monitoring research for winter wheat during critical growth stages. →

Wheat is a major grain crop in China, accounting for one-fifth of the national grain production. Drought stress severely affects the normal growth and development of wheat, leading to total crop failure, reduced yields, and quality. To address the lag and limitations inherent in traditional drought monitoring methods, this paper proposes a multimodal deep learning-based drought stress monitoring S-DNet model for winter wheat during its critical growth periods. Drought stress images of winter wheat during the Rise-Jointing, Heading-Flowering and Flowering-Maturity stages were acquired to establish a dataset corresponding to soil moisture monitoring data. The DenseNet-121 model was selected as the base network to extract drought features. Combining the drought phenotypic characteristics of wheat in the field with meteorological factors and IoT technology, the study integrated the meteorological drought index SPEI, based on WSN sensors, and deep image learning data to build a multimodal deep learning-based S-DNet model for monitoring drought stress in winter wheat. The results show that, compared to the single-modal DenseNet-121 model, the multimodal S-DNet model has higher robustness and generalization capability, with an average drought recognition accuracy reaching 96.4%. This effectively achieves non-destructive, accurate, and rapid monitoring of drought stress in winter wheat.

Why it matches plant phenotyping methods冬小麦の干ばつストレスという植物状態を、画像・土壌水分・気象センサーを統合した深層学習モデルで非破壊推定する手法が研究の中心であり、技術性能も比較評価している。

abstractthis paper proposes a multimodal deep learning-based drought stress monitoring S-DNet model for winter wheat during its critical growth periods.

Remote Sensing Crop Water Stress Determination Using CNN-ViT Architecture →

Efficiently determining crop water stress is vital for optimising irrigation practices and enhancing agricultural productivity. In this realm, the synergy of deep learning with remote sensing technologies offers a significant opportunity. This study introduces an innovative end-to-end deep learning pipeline for within-field crop water determination. This involves the following: (1) creating an annotated dataset for crop water stress using Landsat 8 imagery, (2) deploying a standalone vision transformer model ViT, and (3) the implementation of a proposed CNN-ViT model. This approach allows for a comparative analysis between the two architectures, ViT and CNN-ViT, in accurately determining crop water stress. The results of our study demonstrate the effectiveness of the CNN-ViT framework compared to the standalone vision transformer model. The CNN-ViT approach exhibits superior performance, highlighting its enhanced accuracy and generalisation capabilities. The findings underscore the significance of an integrated deep learning pipeline combined with remote sensing data in the determination of crop water stress, providing a reliable and scalable tool for real-time monitoring and resource management contributing to sustainable agricultural practices.

Why it matches plant phenotyping methods作物の水ストレスという植物状態を対象に、Landsat画像の注釈付きデータセット作成とCNN-ViT／ViTモデルの比較評価を行っており、植物状態の推定手法が研究の中心である。

abstractcreating an annotated dataset for crop water stress using Landsat 8 imagery

StomaVision: stomatal trait analysis through deep learning →

Summary StomaVision is an automated tool designed for high-throughput detection and measurement of stomatal traits, such as stomatal number, pore size, and closure rate. It provides insights into plant responses to environmental cues, streamlining the analysis of micrographs from field-grown plants across various species, including monocots and dicots. Enhanced by a novel collection method that utilizes video recording, StomaVision increases the number of captured images for robust statistical analysis. Accessible via an intuitive web interface at and available for local use in a containerized environment at , this tool ensures long-term usability by minimizing the impact of software updates and maintaining functionality with minimal setup requirements. The application of StomaVision has provided significant physiological insights, such as variations in stomatal density, opening rates, and total pore area under heat stress. These traits correlate with critical physiological processes, including gas exchange, carbon assimilation, and water use efficiency, demonstrating the tool’s utility in advancing our understanding of plant physiology. The ability of StomaVision to identify differences in responses to varying durations of heat treatment highlights its value in plant science research. Plain language summary StomaVision is a tool that automatically counts and measures tiny openings on plant leaves, helping us learn how plants deal with their surroundings. It is easy to use and works well with various plant species. This tool helps scientists see how plants change under stress, making plant research easier and more accurate.

Why it matches plant phenotyping methods気孔数、孔サイズ、閉鎖率などの植物形質を画像から自動抽出するツールの開発・提供が研究の中心であり、植物フェノタイピング手法に該当する。

abstractStomaVision is an automated tool designed for high-throughput detection and measurement of stomatal traits, such as stomatal number, pore size, and closure rate.

Stress phenotyping analysis leveraging autofluorescence image sequences with machine learning. →

Background Autofluorescence-based imaging has the potential to non-destructively characterize the biochemical and physiological properties of plants regulated by genotypes using optical properties of the tissue. A comparative study of stress tolerant and stress susceptible genotypes of Brassica rapa with respect to newly introduced stress-based phenotypes using machine learning techniques will contribute to the significant advancement of autofluorescence-based plant phenotyping research. Methods Autofluorescence spectral images have been used to design a stress detection classifier with two classes, stressed and non-stressed, using machine learning algorithms. The benchmark dataset consisted of time-series image sequences from three Brassica rapa genotypes (CC, R500, and VT), extreme in their morphological and physiological traits captured at the high-throughput plant phenotyping facility at the University of Nebraska-Lincoln, USA. We developed a set of machine learning-based classification models to detect the percentage of stressed tissue derived from plant images and identified the best classifier. From the analysis of the autofluorescence images, two novel stress-based image phenotypes were computed to determine the temporal variation in stressed tissue under progressive drought across different genotypes, i.e., the average percentage stress and the moving average percentage stress. Results The study demonstrated that both the computed phenotypes consistently discriminated against stressed versus non-stressed tissue, with oilseed type (R500) being less prone to drought stress relative to the other two Brassica rapa genotypes (CC and VT). Conclusion Autofluorescence signals from the 365/400 nm excitation/emission combination were able to segregate genotypic variation during a progressive drought treatment under a controlled greenhouse environment, allowing for the exploration of other meaningful phenotypes using autofluorescence image sequences with significance in the context of plant science.

Why it matches plant phenotyping methods自家蛍光画像と機械学習により植物のストレス組織割合を抽出し、新規な時系列ストレス表現型を算出する方法が研究の中心である。

abstractWe developed a set of machine learning-based classification models to detect the percentage of stressed tissue derived from plant images and identified the best classifier.

Beyond a single temperature threshold: Applying a cumulative thermal stress framework to plant heat tolerance. →

Most plant thermal tolerance studies focus on single critical thresholds, which limit the capacity to generalise across studies and predict heat stress under natural conditions. In animals and microbes, thermal tolerance landscapes describe the more realistic, cumulative effects of temperature. We tested this in plants by measuring the decline in leaf photosynthetic efficiency (F V /F M ) following a combination of temperatures and exposure times and then modelled these physiological indices alongside recorded environmental temperatures. We demonstrate that a general relationship between stressful temperatures and exposure durations can be effectively employed to quantify and compare heat tolerance within and across plant species and over time. Importantly, we show how F V /F M curves translate to plants under natural conditions, suggesting that environmental temperatures often impair photosynthetic function. Our findings provide more robust descriptors of heat tolerance in plants and suggest that heat tolerance in disparate groups of organisms can be studied with a single predictive framework.

Why it matches plant phenotyping methods植物の熱耐性を、温度と曝露時間の累積効果および葉の光合成効率から定量・比較する予測フレームワークが研究の中心であり、植物生理状態のフェノタイピング手法に該当する。

abstractWe demonstrate that a general relationship between stressful temperatures and exposure durations can be effectively employed to quantify and compare heat tolerance within and across plant species and over time.

AI-assisted image analysis and physiological validation for progressive drought detection in a diverse panel of Gossypium hirsutum L. →

Introduction Drought detection, spanning from early stress to severe conditions, plays a crucial role in maintaining productivity, facilitating recovery, and preventing plant mortality. While handheld thermal cameras have been widely employed to track changes in leaf water content and stomatal conductance, research on thermal image classification remains limited due mainly to low resolution and blurry images produced by handheld cameras. Methods In this study, we introduce a computer vision pipeline to enhance the significance of leaf-level thermal images across 27 distinct cotton genotypes cultivated in a greenhouse under progressive drought conditions. Our approach involved employing a customized software pipeline to process raw thermal images, generating leaf masks, and extracting a range of statistically relevant thermal features (e.g., min and max temperature, median value, quartiles, etc.). These features were then utilized to develop machine learning algorithms capable of assessing leaf hydration status and distinguishing between well-watered (WW) and dry-down (DD) conditions. Results Two different classifiers were trained to predict the plant treatment-random forest and multilayer perceptron neural networks-finding 75% and 78% accuracy in the treatment prediction, respectively. Furthermore, we evaluated the predicted versus true labels based on classic physiological indicators of drought in plants, including volumetric soil water content, leaf water potential, and chlorophyll a fluorescence, to provide more insights and possible explanations about the classification outputs. Discussion Interestingly, mislabeled leaves mostly exhibited notable responses in fluorescence, water uptake from the soil, and/or leaf hydration status. Our findings emphasize the potential of AI-assisted thermal image analysis in enhancing the informative value of common heterogeneous datasets for drought detection. This application suggests widening the experimental settings to be used with deep learning models, designing future investigations into the genotypic variation in plant drought response and potential optimization of water management in agricultural settings.

Why it matches plant phenotyping methods葉の熱画像からマスクと熱特徴量を抽出し、機械学習で水分状態・乾燥処理を判定する画像解析パイプラインが中心であり、植物表現型の取得・推定手法に該当する。

abstractOur approach involved employing a customized software pipeline to process raw thermal images, generating leaf masks, and extracting a range of statistically relevant thermal features

Biomechanical phenotyping pipeline for stalk lodging resistance in maize. →

Stalk lodging (structural failure crops prior to harvest) significantly reduces annual yields of vital grain crops. The lack of standardized, high throughput phenotyping methods capable of quantifying biomechanical plant traits prevents comprehensive understanding of the genetic architecture of stalk lodging resistance. A phenotyping pipeline developed to enable higher throughput biomechanical measurements of plant traits related to stalk lodging is presented. The methods were developed using principles from the fields of engineering mechanics and metrology and they enable retention of plant-specific data instead of averaging data across plots as is typical in most phenotyping studies. This pipeline was specifically designed to be implemented in large experimental studies and has been used to phenotype over 40,000 maize stalks. The pipeline includes both lab- and field-based phenotyping methodologies and enables the collection of metadata. Best practices learned by implementing this pipeline over the past three years are presented. The specific instruments (including model numbers and manufacturers) that work well for these methods are presented, however comparable instruments may be used in conjunction with these methods as seen fit.•Efficient methods to measure biomechanical traits and record metadata related to stalk lodging.•Can be used in studies with large sample sizes (i.e., > 1,000).

Why it matches plant phenotyping methodsトウモロコシの倒伏抵抗性に関わる生体力学的形質を高スループットに測定する、実験室・圃場対応の表現型解析パイプラインを開発・実装した研究であり、方法が中心的である。

abstractA phenotyping pipeline developed to enable higher throughput biomechanical measurements of plant traits related to stalk lodging is presented.

Estimating the frost damage index in lettuce using UAV-based RGB and multispectral images. →

Introduction The cold stress is one of the most important factors for affecting production throughout year, so effectively evaluating frost damage is great significant to the determination of the frost tolerance in lettuce. Methods We proposed a high-throughput method to estimate lettuce FDI based on remote sensing. Red-Green-Blue (RGB) and multispectral images of open-field lettuce suffered from frost damage were captured by Unmanned Aerial Vehicle platform. Pearson correlation analysis was employed to select FDI-sensitive features from RGB and multispectral images. Then the models were established for different FDI-sensitive features based on sensor types and different groups according to lettuce colors using multiple linear regression, support vector machine and neural network algorithms, respectively. Results and discussion Digital number of blue and red channels, spectral reflectance at blue, red and near-infrared bands as well as six vegetation indexes (VIs) were found to be significantly related to the FDI of all lettuce groups. The high sensitivity of four modified VIs to frost damage of all lettuce groups was confirmed. The average accuracy of models were improved by 3% to 14% through a combination of multisource features. Color of lettuce had a certain impact on the monitoring of frost damage by FDI prediction models, because the accuracy of models based on green lettuce group were generally higher. The MULTISURCE-GREEN-NN model with R 2 of 0.715 and RMSE of 0.014 had the best performance, providing a high-throughput and efficient technical tool for frost damage investigation which will assist the identification of cold-resistant green lettuce germplasm and related breeding.

Why it matches plant phenotyping methodsUAV画像と機械学習を用いてレタスの霜害指数という植物状態を推定する高スループット手法を開発・評価しており、フェノタイピング手法が中心です。

abstractWe proposed a high-throughput method to estimate lettuce FDI based on remote sensing.

Advancements in Imaging Sensors and AI for Plant Stress Detection: A Systematic Literature Review. →

Integrating imaging sensors and artificial intelligence (AI) have contributed to detecting plant stress symptoms, yet data analysis remains a key challenge. Data challenges include standardized data collection, analysis protocols, selection of imaging sensors and AI algorithms, and finally, data sharing. Here, we present a systematic literature review (SLR) scrutinizing plant imaging and AI for identifying stress responses. We performed a scoping review using specific keywords, namely abiotic and biotic stress, machine learning, plant imaging and deep learning. Next, we used programmable bots to retrieve relevant papers published since 2006. In total, 2,704 papers from 4 databases (Springer, ScienceDirect, PubMed, and Web of Science) were found, accomplished by using a second layer of keywords (e.g., hyperspectral imaging and supervised learning). To bypass the limitations of search engines, we selected OneSearch to unify keywords. We carefully reviewed 262 studies, summarizing key trends in AI algorithms and imaging sensors. We demonstrated that the increased availability of open-source imaging repositories such as PlantVillage or Kaggle has strongly contributed to a widespread shift to deep learning, requiring large datasets to train in stress symptom interpretation. Our review presents current trends in AI-applied algorithms to develop effective methods for plant stress detection using image-based phenotyping. For example, regression algorithms have seen substantial use since 2021. Ultimately, we offer an overview of the course ahead for AI and imaging technologies to predict stress responses. Altogether, this SLR highlights the potential of AI imaging in both biotic and abiotic stress detection to overcome challenges in plant data analysis.

Why it matches plant phenotyping methods植物ストレス検出のための画像センサーとAI手法を体系的にレビューしており、植物表現型取得・解析手法が中心である。

abstractOur review presents current trends in AI-applied algorithms to develop effective methods for plant stress detection using image-based phenotyping.

The Dissection of Nitrogen Response Traits Using Drone Phenotyping and Dynamic Phenotypic Analysis to Explore N Responsiveness and Associated Genetic Loci in Wheat. →

Inefficient nitrogen (N) utilization in agricultural production has led to many negative impacts such as excessive use of N fertilizers, redundant plant growth, greenhouse gases, long-lasting toxicity in ecosystem, and even effect on human health, indicating the importance to optimize N applications in cropping systems. Here, we present a multiseasonal study that focused on measuring phenotypic changes in wheat plants when they were responding to different N treatments under field conditions. Powered by drone-based aerial phenotyping and the AirMeasurer platform, we first quantified 6 N response-related traits as targets using plot-based morphological, spectral, and textural signals collected from 54 winter wheat varieties. Then, we developed dynamic phenotypic analysis using curve fitting to establish profile curves of the traits during the season, which enabled us to compute static phenotypes at key growth stages and dynamic phenotypes (i.e., phenotypic changes) during N response. After that, we combine 12 yield production and N-utilization indices manually measured to produce N efficiency comprehensive scores (NECS), based on which we classified the varieties into 4 N responsiveness (i.e., N-dependent yield increase) groups. The NECS ranking facilitated us to establish a tailored machine learning model for N responsiveness-related varietal classification just using N-response phenotypes with high accuracies. Finally, we employed the Wheat55K SNP Array to map single-nucleotide polymorphisms using N response-related static and dynamic phenotypes, helping us explore genetic components underlying N responsiveness in wheat. In summary, we believe that our work demonstrates valuable advances in N response-related plant research, which could have major implications for improving N sustainability in wheat breeding and production.

Why it matches plant phenotyping methodsドローン画像とAirMeasurerを用いた作物形態・スペクトル・テクスチャ形質の取得、および曲線フィッティングによる動的表現型抽出が研究の中心であり、実質的な植物フェノタイピング手法の応用・解析である。

abstractPowered by drone-based aerial phenotyping and the AirMeasurer platform, we first quantified 6 N response-related traits as targets using plot-based morphological, spectral, and textural signals collected from 54 winter wheat varieties.

Noninvasive Detection of Salt Stress in Cotton Seedlings by Combining Multicolor Fluorescence-Multispectral Reflectance Imaging with EfficientNet-OB2. →

Salt stress is considered one of the primary threats to cotton production. Although cotton is found to have reasonable salt tolerance, it is sensitive to salt stress during the seedling stage. This research aimed to propose an effective method for rapidly detecting salt stress of cotton seedlings using multicolor fluorescence-multispectral reflectance imaging coupled with deep learning. A prototyping platform that can obtain multicolor fluorescence and multispectral reflectance images synchronously was developed to get different characteristics of each cotton seedling. The experiments revealed that salt stress harmed cotton seedlings with an increase in malondialdehyde and a decrease in chlorophyll content, superoxide dismutase, and catalase after 17 days of salt stress. The Relief algorithm and principal component analysis were introduced to reduce data dimension with the first 9 principal component images (PC1 to PC9) accounting for 95.2% of the original variations. An optimized EfficientNet-B2 (EfficientNet-OB2), purposely used for a fixed resource budget, was established to detect salt stress by optimizing a proportional number of convolution kernels assigned to the first convolution according to the corresponding contributions of PC1 to PC9 images. EfficientNet-OB2 achieved an accuracy of 84.80%, 91.18%, and 95.10% for 5, 10, and 17 days of salt stress, respectively, which outperformed EfficientNet-B2 and EfficientNet-OB4 with higher training speed and fewer parameters. The results demonstrate the potential of combining multicolor fluorescence-multispectral reflectance imaging with the deep learning model EfficientNet-OB2 for salt stress detection of cotton at the seedling stage, which can be further deployed in mobile platforms for high-throughput screening in the field.

Why it matches plant phenotyping methods綿実生の塩ストレス状態を画像から検出する撮像プラットフォームと深層学習手法を開発しており、植物状態の取得・抽出が研究の中心である。

abstractThis research aimed to propose an effective method for rapidly detecting salt stress of cotton seedlings using multicolor fluorescence-multispectral reflectance imaging coupled with deep learning.

Rapid and High Throughput Hydroponics Phenotyping Method for Evaluating Chickpea Resistance to Phytophthora Root Rot. →

Phytophthora root rot (PRR) is a major constraint to chickpea production in Australia. Management options for controlling the disease are limited to crop rotation and avoiding high risk paddocks for planting. Current Australian cultivars have partial PRR resistance, and new sources of resistance are needed to breed cultivars with improved resistance. Field- and glasshouse-based PRR resistance phenotyping methods are labour intensive, time consuming, and provide seasonally variable results; hence, these methods limit breeding programs’ abilities to screen large numbers of genotypes. In this study, we developed a new space saving (400 plants/m2), rapid (<12 days), and simplified hydroponics-based PRR phenotyping method, which eliminated seedling transplant requirements following germination and preparation of zoospore inoculum. The method also provided post-phenotyping propagation all the way through to seed production for selected high-resistance lines. A test of 11 diverse chickpea genotypes provided both qualitative (PRR symptoms) and quantitative (amount of pathogen DNA in roots) results demonstrating that the method successfully differentiated between genotypes with differing PRR resistance. Furthermore, PRR resistance hydroponic assessment results for 180 recombinant inbred lines (RILs) were correlated strongly with the field-based phenotyping, indicating the field phenotype relevance of this method. Finally, post-phenotyping high-resistance genotypes were selected. These were successfully transplanted and propagated all the way through to seed production; this demonstrated the utility of the rapid hydroponics method (RHM) for selection of individuals from segregating populations. The RHM will facilitate the rapid identification and propagation of new PRR resistance sources, especially in large breeding populations at early evaluation stages.

Why it matches plant phenotyping methods植物の根腐病抵抗性を評価する高速・高スループット水耕フェノタイピング法を開発し、遺伝子型間識別と圃場評価との相関で検証しているため、方法が研究の中心です。

abstractwe developed a new space saving (400 plants/m2), rapid (<12 days), and simplified hydroponics-based PRR phenotyping method

Monitoring of drought stress and transpiration rate using proximal thermal and hyperspectral imaging in an indoor automated plant phenotyping platform →

BACKGROUND: Thermography is a popular tool to assess plant water-use behavior, as plant temperature is influenced by transpiration rate, and is commonly used in field experiments to detect plant water deficit. Its application in indoor automated phenotyping platforms is still limited and mainly focuses on differences in plant temperature between genotypes or treatments, instead of estimating stomatal conductance or transpiration rate. In this study, the transferability of commonly used thermography analysis protocols from the field to greenhouse phenotyping platforms was evaluated. In addition, the added value of combining thermal infrared (TIR) with hyperspectral imaging to monitor drought effects on plant transpiration rate (E) was evaluated. RESULTS: The sensitivity of commonly used TIR indices to detect drought-induced and genotypic differences in water status was investigated in eight maize inbred lines in the automated phenotyping platform PHENOVISION. Indices that normalized plant temperature for vapor pressure deficit and/or air temperature at the time of imaging were most sensitive to drought and could detect genotypic differences in the plants' water-use behavior. However, these indices were not strongly correlated to stomatal conductance and E. The canopy temperature depression index, the crop water stress index and the simplified stomatal conductance index were more suitable to monitor these traits, and were consequently used to develop empirical E prediction models by combining them with hyperspectral indices and/or environmental variables. Different modeling strategies were evaluated, including single index-based, machine learning and mechanistic models. Model comparison showed that combining multiple TIR indices in a random forest model can improve E prediction accuracy, and that the contribution of the hyperspectral data is limited when multiple indices are used. However, the empirical models trained on one genotype were not transferable to all eight inbred lines. CONCLUSION: Overall, this study demonstrates that existing TIR indices can be used to monitor drought stress and develop E prediction models in an indoor setup, as long as the indices normalize plant temperature for ambient air temperature or relative humidity.

Why it matches plant phenotyping methods屋内自動植物フェノタイピング環境で、熱画像・ハイパースペクトル画像による干ばつストレス、水利用、蒸散速度の推定手法を評価・モデル比較しており、フェノタイピング手法が中心である。

abstractthe transferability of commonly used thermography analysis protocols from the field to greenhouse phenotyping platforms was evaluated

Deep Transfer Learning for Image Classification of Phosphorus Nutrition States in Individual Maize Leaves →

Computer vision is a powerful technology that has enabled solutions in various fields by analyzing visual attributes in images. One field that has taken advantage of computer vision is agricultural automation, which promotes high-quality crop production. The nutritional status of a crop is a crucial factor in determining its productivity. This status is mediated by approximately 14 chemical elements acquired by the plant, and their determination plays a pivotal role in farm management. To address the timely identification of nutritional disorders, this study focuses on the classification of three levels of phosphorus deficiencies through individual leaf analysis. The methodological steps include: (1) generating a database with laboratory-grown maize plants that were induced to total phosphorus deficiency, medium deficiency, and total nutrition, using different capture devices; (2) processing the images with state-of-the-art transfer learning architectures (i.e. VGG16, ResNet50, GoogLeNet, DenseNet201, and MobileNetV2); and (3) evaluating the classification performance of the models using the created database. The results show that the VGG16 model achieves superior performance, with 98% classification accuracy. However, the other studied architectures also demonstrate competitive performance and are considered state-of-the-art automatic leaf deficiency detection tools. The proposed method can be a starting point to fine-tune machine vision-based solutions tailored for real-time monitoring of crop nutritional status.

Why it matches plant phenotyping methodsトウモロコシ葉画像からリン欠乏状態を分類する画像解析手法を構築・評価しており、植物の栄養状態という表現型の取得が研究の中心である。

abstractthis study focuses on the classification of three levels of phosphorus deficiencies through individual leaf analysis.

Homomorphic Integral and Dual Rectified Convolutional Grading for Salinity Prediction During Seedling in Rice →

Rice is considered as one of the most sought out food crops globally. Salinity resilience plays an essential part in rice cultivation. But, uncontrolled saline level specifically at the seedling stage may unfavorable influence productivity of rice extensively. If not properly monitored, salinity stress brings about acute impairment during the seedling stage of crop growth bringing about an overall loss of 50%. Hence, it is mandatory to design an image classification and grading learning method for salinity stress analysis principally at the seedling stage and then benchmark its performance to circumvent depletion in rice yield. However, the classification using traditional method is both said to be laborious in terms of time and most of the time results in error owing to incorrect classification. To identify and classify salinity stress in rice seedlings using field images, the study reports the need of deep learning built model over traditional method of assessing rice crop's susceptibility to salt stress during the seedling stage. In this work, a method called Homomorphic Fourier Integral-based image classification and Dual Rectified Linear Convolutional (HFI-DRLC) grading learning for salinity stress level analysis in rice crops at seedling stage is proposed. Initially, an image enhancement framework that balances both field image features like as contrast, illumination and key properties that are important for identification of salinity stress level in rice crops at seedling stage. This is performed using Homomorphic Fourier Integral Filter-based Preprocessing model. Next, Dual Rectified Linear Convolutional Neural prediction-based salinity tolerance in rice at seedling stage is designed to ensure both accuracy and precision. To investigate the effects of different improvement methods on the accuracy and precision of salinity tolerance in rice at seedling stage, comparison experiments between HFI-DRLC and traditional methods and comparison experiments with rice seedling dataset and rice seedling samplings from ICAR (Central Coastal Agricultural Research Institute, Old Goa, India) are executed. The method proposed in this study was shown to be more effective than traditional methods in terms of precision, recall, accuracy and error rate, providing a better method for salinity tolerance in rice at seedling stage.

Why it matches plant phenotyping methodsイネ幼苗の塩ストレス状態を圃場画像から分類・等級化する画像処理および深層学習手法を開発し、従来法やデータセットで性能比較しており、表現型取得・推定が研究の中心である。

abstractdesign an image classification and grading learning method for salinity stress analysis principally at the seedling stage

Modeling the spatial-spectral characteristics of plants for nutrient status identification using hyperspectral data and deep learning methods. →

Sustainable fertilizer management in precision agriculture is essential for both economic and environmental reasons. To effectively manage fertilizer input, various methods are employed to monitor and track plant nutrient status. One such method is hyperspectral imaging, which has been on the rise in recent times. It is a remote sensing tool used to monitor plant physiological changes in response to environmental conditions and nutrient availability. However, conventional hyperspectral processing mainly focuses on either the spectral or spatial information of plants. This study aims to develop a hybrid convolution neural network (CNN) capable of simultaneously extracting spatial and spectral information from quinoa and cowpea plants to identify their nutrient status at different growth stages. To achieve this, a nutrient experiment with four treatments (high and low levels of nitrogen and phosphorus) was conducted in a glasshouse. A hybrid CNN model comprising a 3D CNN (extracts joint spectral-spatial information) and a 2D CNN (for abstract spatial information extraction) was proposed. Three pre-processing techniques, including second-order derivative, standard normal variate, and linear discriminant analysis, were applied to selected regions of interest within the plant spectral hypercube. Together with the raw data, these datasets were used as inputs to train the proposed model. This was done to assess the impact of different pre-processing techniques on hyperspectral-based nutrient phenotyping. The performance of the proposed model was compared with a 3D CNN, a 2D CNN, and a Hybrid Spectral Network (HybridSN) model. Effective wavebands were selected from the best-performing dataset using a greedy stepwise-based correlation feature selection (CFS) technique. The selected wavebands were then used to retrain the models to identify the nutrient status at five selected plant growth stages. From the results, the proposed hybrid model achieved a classification accuracy of over 94% on the test dataset, demonstrating its potential for identifying nitrogen and phosphorus status in cowpea and quinoa at different growth stages.

Why it matches plant phenotyping methods植物の栄養状態をハイパースペクトル画像から抽出するCNN手法を開発し、前処理・複数モデルとの比較・異なる生育段階での性能評価を行っており、表現型取得が中心である。

abstractThis study aims to develop a hybrid convolution neural network (CNN) capable of simultaneously extracting spatial and spectral information from quinoa and cowpea plants to identify their nutrient status at different growth stages.

Frost Damage Index: The Antipode of Growing Degree Days →

Abiotic stresses such as heat and frost limit plant growth and productivity. Image-based field phenotyping methods allow quantifying not only plant growth but also plant senescence. Winter crops show senescence caused by cold spells, visible as declines in leaf area. We accurately quantified such declines by monitoring changes in canopy cover based on time-resolved high-resolution imagery in the field. Thirty-six winter wheat genotypes were measured in multiple years. A concept termed "frost damage index" (FDI) was developed that, in analogy to growing degree days, summarizes frost events in a cumulative way. The measured sensitivity of genotypes to the FDI correlated with visual scorings commonly used in breeding to assess winter hardiness. The FDI concept could be adapted to other factors such as drought or heat stress. While commonly not considered in plant growth modeling, integrating such degradation processes may be key to improving the prediction of plant performance for future climate scenarios.

Why it matches plant phenotyping methods圃場の時系列高解像度画像からキャノピー被覆率の変化を定量化し、霜害指数（FDI）を開発・検証しており、画像ベース表現型取得が研究の中心である。

abstractImage-based field phenotyping methods allow quantifying not only plant growth but also plant senescence.

Nitrogen deficiency in maize: Annotated image classification dataset. →

Nitrogen (N) is one of the key inputs in maize production applied in the form of fertilizers. Nitrogen deficiency during the vegetation period leads to lower yields since N is utilized in proteins and enzymes that enable important biochemical processes such as photosynthesis. Nitrogen deficiency leads to specific symptoms that eventually become visible to the naked eye during vegetation. Our hypothesis was that N deficiency can be detected from maize RGB images in parametric process such as a deep neural network. The aim of the reported dataset is to optimize the usage of N in the farmer's fields and accordingly, reduce its environmental footprint. This dataset contains 1200 images of maize canopy from field trials, annotated by an expert from an agricultural institution. The field trials included three levels of N fertilization: N0 without N fertilization, N75 with 75 kg of added N fertilizer, and NFull with 136 kg of added N fertilizer. For each fertilizer level, 400 plots were created with 238 different maize genotypes, resulting in a total of 1200 plots. Images were taken with a tripod mounted DSLR camera, aperture priority set to f/8 and sensor sensitivity set to ISO400. Images were taken at a 45° angle to each plot. This dataset can be useful to both researchers, data scientists and agronomists, especially in the context of emerging technologies in precision agriculture, such as robotics, 5G networks and unmanned aerial vehicle (UAV). The dataset is one of the first publicly accessible datasets of maize canopy images under different N fertilization levels and represents a valuable public resource for development of machine learning models for in-season detection of N deficiency in maize.

Why it matches plant phenotyping methodsトウモロコシの画像から窒素欠乏という植物状態を検出するための注釈付き公開画像データセットであり、機械学習による表現型抽出の基盤として方法論的に中心的です。

abstractThis dataset contains 1200 images of maize canopy from field trials, annotated by an expert from an agricultural institution.

Rapid imaging in the field followed by photogrammetry digitally captures the otherwise lost dimensions of plant specimens →

Premise We recognized the need for a customized imaging protocol for plant specimens at the time of collection for the purpose of three-dimensional (3D) modeling, as well as the lack of a broadly applicable photogrammetry protocol that encompasses the heterogeneity of plant specimen geometries and the challenges introduced by processes such as wilting. Methods and results We developed an equipment list and set of detailed protocols describing how to capture images of plant specimens in the field prior to their deformation (e.g., with pressing) and how to produce a 3D model from the image sets in Agisoft Metashape Professional. Conclusions The equipment list and protocols represent a foundation on which additional improvements can be made for specimen geometries outside of the range of the six types considered, and an easy entry into photogrammetry for those who have not previously used it.

Why it matches plant phenotyping methods植物標本の3D形状を取得するための野外撮像およびフォトグラメトリ手順を開発した研究であり、画像取得・形状抽出手法が中心です。

abstractWe developed an equipment list and set of detailed protocols describing how to capture images of plant specimens in the field prior to their deformation (e.g., with pressing) and how to produce a 3D model from the image sets in Agisoft Metashape Professional.

Open-source workflow design and management software to interrogate duckweed growth conditions and stress responses. →

Duckweeds, a family of floating aquatic plants, are ideal model plants for laboratory experiments because they are small, easy to cultivate, and reproduce quickly. Duckweed cultivation, for the purposes of scientific research, requires that lineages are maintained as continuous populations of asexually propagating fronds, so research teams need to develop optimized cultivation conditions and coordinate maintenance tasks for duckweed stocks. Additionally, computational image analysis is proving to be a powerful duckweed research tool, but researchers lack software tools to assist with data collection and storage in a way that can feed into scripted data analysis. We set out to support these processes using a laboratory management software called Aquarium, an open-source application developed to manage laboratory inventory and plan experiments. We developed a suite of duckweed cultivation and experimentation operation types in Aquarium, which we then integrated with novel data analysis scripts. We then demonstrated the efficacy of our system with a series of image-based growth assays, and explored how our framework could be used to develop optimized cultivation protocols. We discuss the unexpected advantages and the limitations of this approach, suggesting areas for future software tool development. In its current state, our approach helps to bridge the gap between laboratory implementation and data analytical software for duckweed biologists and builds a foundation for future development of end-to-end computational tools in plant science.

Why it matches plant phenotyping methodsアヒルウキクサの画像ベース成長アッセイを含む、培養・実験管理ソフトウェアとデータ解析ワークフローの開発が中心であり、植物表現型取得を支援する方法論的貢献である。

abstractcomputational image analysis is proving to be a powerful duckweed research tool, but researchers lack software tools to assist with data collection and storage in a way that can feed into scripted data analysis.

A novel method for irrigating plants, tracking water use, and imposing water deficits in controlled environments. →

The study of genomic control of drought tolerance in crops requires techniques to impose well defined and consistent levels of drought stress and efficiently measure single-plant water use for hundreds of experimental units over timescales of several months. Traditional gravimetric methods are extremely labor intensive or require expensive technology, and are subject to other errors. This study demonstrates a low-cost, passive, bottom-watered system that is easily scaled for high-throughput phenotyping. The soil water content in the pots is controlled by altering the water table height in an underlying wicking bed via a float valve. The resulting soil moisture profile is then maintained passively as water withdrawn by the plant is replaced by upward movement of water from the wicking bed, which is fed from a reservoir via the float valve. The single-plant water use can be directly measured over time intervals from one to several days by observing the water level in the reservoir. Using this method, four different drought stress levels were induced in pots containing soybean (Glycine max (L.) Merr.), producing four statistically distinct groups for shoot dry weight and seed yield, as well as clear treatment effects for other relevant parameters, including root:shoot dry weight ratio, pod number, cumulative water use, and water use efficiency. This system has a broad range of applications, and should increase feasibility of high-throughput phenotyping efforts for plant drought tolerance traits.

Why it matches plant phenotyping methods高スループット表現型解析のための低コスト灌水・水利用測定システムを開発・実証しており、植物の水利用と乾燥ストレス関連形質の取得が中心的な方法論的貢献である。

abstractThis study demonstrates a low-cost, passive, bottom-watered system that is easily scaled for high-throughput phenotyping.

RootBot: High‐throughput root stress phenotyping robot →

Premise: Higher temperatures across the globe are causing an increase in the frequency and severity of droughts. In agricultural crops, this results in reduced yields, financial losses, and increased food costs at the supermarket. Root growth maintenance in drying soils plays a major role in a plant's ability to survive and perform under drought, but phenotyping root growth is extremely difficult due to roots being under the soil. Methods and Results: RootBot is an automated high-throughput phenotyping robot that eliminates many of the difficulties and reduces the time required for performing drought-stress studies on primary roots. RootBot simulates root growth conditions using transparent plates to create a gap that is filled with soil and polyethylene glycol (PEG) to simulate low soil moisture. RootBot has a gantry system with vertical slots to hold the transparent plates, which theoretically allows for evaluating more than 50 plates at a time. Software pipelines were also co-opted, developed, tested, and extensively refined for running the RootBot imaging process, storing and organizing the images, and analyzing and extracting data. Conclusions: The RootBot platform and the lessons learned from its design and testing represent a valuable resource for better understanding drought tolerance mechanisms in roots, as well as for identifying breeding and genetic engineering targets for crop plants.

Why it matches plant phenotyping methods根の乾燥ストレス下での成長を自動撮像・解析する高スループット表現型解析ロボットの開発、試験、画像データ抽出が中心である。

abstractRootBot is an automated high-throughput phenotyping robot that eliminates many of the difficulties and reduces the time required for performing drought-stress studies on primary roots.

NYUS.2: an Automated Machine Learning Prediction Model for the Large-scale Real-time Simulation of Grapevine Freezing Tolerance in North America →

O_LIAccurate and real-time monitoring of grapevine freezing tolerance is crucial for the sustainability of the grape industry in cool climate viticultural regions. However, on-site data is limited. Current prediction models underperform under diverse climate conditions, which limits the large-scale deployment of these methods. C_LIO_LIWe combined grapevine freezing tolerance data from multiple regions in North America and generated a predictive model based on hourly temperature-derived features and cultivar features using AutoGluon, an automatic machine learning engine. Feature importance was quantified by AutoGluon and SHAP value. The final model was evaluated and compared with previous models for its performance under different climate conditions. C_LIO_LIThe final model achieved an overall 1.36 {degrees}C root-mean-square error during model testing and outperformed two previous models using three test cultivars at all testing regions. Two feature importance quantification methods identified five shared essential features. Detailed analysis of the features indicates that the model might have adequately extracted some biological mechanisms during training. C_LIO_LIThe final model, named NYUS.2, was deployed along with two previous models as an R shiny-based application in the 2022-2023 dormancy season, enabling large-scale and real-time simulation of grapevine freezing tolerance in North America for the first time. C_LI

Why it matches plant phenotyping methodsブドウの凍結耐性という植物状態を大規模・リアルタイムに推定する自動機械学習モデルを開発し、既存モデルとの性能比較と実運用展開まで行っており、表現型推定手法が中心です。

abstractWe combined grapevine freezing tolerance data from multiple regions in North America and generated a predictive model based on hourly temperature-derived features and cultivar features using AutoGluon, an automatic machine learning engine.

Monitoring of drought stress and transpiration rate using proximal thermal and hyperspectral imaging in an indoor automated plant phenotyping platform →

Abstract Background Thermography is a popular tool to assess plant water use behavior, as plant temperature is influenced by transpiration rate, and is commonly used in field experiments to detect drought stress. Its application in indoor automated phenotyping platforms is still limited and mainly focuses on differences in plant temperature between genotypes or treatments, instead of estimating stomatal conductance or transpiration rate. In this study, the transferability of commonly used thermography analysis protocols from the field to greenhouse phenotyping platforms was evaluated. In addition, the added value of combining thermal infrared (TIR) with hyperspectral imaging to monitor drought effects on plant transpiration rate (E) was evaluated. Results The sensitivity of commonly used TIR indices to detect drought-induced and genotypic differences in water status was investigated in eight maize inbred lines in the automated phenotyping platform PHENOVISION. Indices that normalized plant temperature for vapor pressure deficit and/or air temperature at the time of imaging were most sensitive to drought and could detect genotypic difference in the plants’ water use behavior. However, these indices were not strongly correlated to stomatal conductance and E. The canopy temperature depression index, the crop water stress index and the simplified stomatal conductance index were more suitable to monitor these traits, and were consequently used to develop empirical E prediction models by combining them with hyperspectral indices and/or environmental variables. Different modeling strategies were evaluated including single index-based, machine learning and mechanistic models. Model comparison showed that combining multiple thermal infrared indices in a random forest model can improve E prediction accuracy, and that the contribution of the hyperspectral data is limited when multiple indices are used. However, the empirical models trained on one genotype were not transferable to all eight inbred lines. Conclusion Overall, this study demonstrates that existing TIR indices can be used to monitor drought stress and develop E prediction models in an indoor setup, as long as the indices normalize plant temperature for ambient air temperature or relative humidity.

Why it matches plant phenotyping methods屋内自動植物フェノタイピング基盤で、熱画像・ハイパースペクトル画像から乾燥ストレス、蒸散速度、気孔コンダクタンスを推定する手法の評価・モデル開発が中心である。

abstractthe transferability of commonly used thermography analysis protocols from the field to greenhouse phenotyping platforms was evaluated

Development of a mobile, high-throughput, and low-cost image-based plant growth phenotyping system →

Abstract Nondestructive plant phenotyping is fundamental for unraveling molecular processes underlying plant development and response to the environment. While the emergence of high-through phenotyping facilities can further our understanding of plant development and stress responses, their high costs significantly hinder scientific progress. To democratize high-throughput plant phenotyping, we developed sets of low-cost image- and weight-based devices to monitor plant growth and evapotranspiration. We paired these devices with a suite of computational pipelines for integrated and straightforward data analysis. We validated the suitability of our system for large screens by evaluating a cowpea diversity panel for responses to drought stress. The observed natural variation was subsequently used for Genome-Wide Association Study, where we identified nine genetic loci that putatively contribute to cowpea drought resilience during early vegetative development. We validated the homologs of the identified candidate genes in Arabidopsis using available mutant lines. These results demonstrate the varied applicability of this low-cost phenotyping system. In the future, we foresee these setups facilitating identification of genetic components of growth, plant architecture, and stress tolerance across a wide variety of species.

Why it matches plant phenotyping methods低コストの画像・重量ベース装置と計算パイプラインを開発し、植物成長・蒸発散を測定するフェノタイピングシステムとして検証しており、手法が研究の中心である。

abstractwe developed sets of low-cost image- and weight-based devices to monitor plant growth and evapotranspiration.

From root to shoot: quantifying nematode tolerance in Arabidopsis thaliana by high-throughput phenotyping of plant development →

Nematode migration, feeding site formation, withdrawal of plant assimilates, and activation of plant defence responses have a significant impact on plant growth and development. Plants display intraspecific variation in tolerance limits for root-feeding nematodes. Although disease tolerance has been recognized as a distinct trait in biotic interactions of mainly crops, we lack mechanistic insights. Progress is hampered by difficulties in quantification and laborious screening methods. We turned to the model plant Arabidopsis thaliana, since it offers extensive resources to study the molecular and cellular mechanisms underlying nematode-plant interactions. Through imaging of tolerance-related parameters, the green canopy area was identified as an accessible and robust measure for assessing damage due to cyst nematode infection. Subsequently, a high-throughput phenotyping platform simultaneously measuring the green canopy area growth of 960 A. thaliana plants was developed. This platform can accurately measure cyst nematode and root-knot nematode tolerance limits in A. thaliana through classical modelling approaches. Furthermore, real-time monitoring provided data for a novel view of tolerance, identifying a compensatory growth response. These findings show that our phenotyping platform will enable a new mechanistic understanding of tolerance to below-ground biotic stress.

Why it matches plant phenotyping methods根圏線虫感染による植物の耐性を定量化するため、画像による緑色キャノピー面積の測定と、960個体を同時測定する高スループット表現型解析プラットフォームを開発しており、表現型取得法が研究の中心である。

abstractThrough imaging of tolerance-related parameters, the green canopy area was identified as an accessible and robust measure for assessing damage due to cyst nematode infection.

High-throughput characterization of cortical microtubule arrays response to anisotropic tensile stress. →

Background Plants can perceive and respond to mechanical signals. For instance, cortical microtubule (CMT) arrays usually reorganize following the predicted maximal tensile stress orientation at the cell and tissue level. While research in the last few years has started to uncover some of the mechanisms mediating these responses, much remains to be discovered, including in most cases the actual nature of the mechanosensors. Such discovery is hampered by the absence of adequate quantification tools that allow the accurate and sensitive detection of phenotypes, along with high throughput and automated handling of large datasets that can be generated with recent imaging devices. Results Here we describe an image processing workflow specifically designed to quantify CMT arrays response to tensile stress in time-lapse datasets following an ablation in the epidermis - a simple and robust method to change mechanical stress pattern. Our Fiji-based workflow puts together several plugins and algorithms under the form of user-friendly macros that automate the analysis process and remove user bias in the quantification. One of the key aspects is also the implementation of a simple geometry-based proxy to estimate stress patterns around the ablation site and compare it with the actual CMT arrays orientation. Testing our workflow on well-established reporter lines and mutants revealed subtle differences in the response over time, as well as the possibility to uncouple the anisotropic and orientational response. Conclusion This new workflow opens the way to dissect with unprecedented detail the mechanisms controlling microtubule arrays re-organization, and potentially uncover the still largely elusive plant mechanosensors.

Why it matches plant phenotyping methods植物細胞の微小管配向応答を定量化する画像解析ワークフローを開発し、自動化・バイアス低減・応力パターン推定まで扱うため、植物フェノタイピング手法が研究の中心である。

abstractHere we describe an image processing workflow specifically designed to quantify CMT arrays response to tensile stress in time-lapse datasets

A new experimental setup to measure hydraulic conductivity of plant segments →

Abstract Plant hydraulic conductivity and its decline under water stress are the focal point of current plant hydraulic research. The common methods of measuring hydraulic conductivity control a pressure gradient to push water through plant samples, submitting them to conditions far away from those that are experienced in nature where flow is suction driven and determined by the leaf water demand. In this paper, we present two methods for measuring hydraulic conductivity under closer to natural conditions, an artificial plant setup and a horizontal syringe pump setup. Both approaches use suction to pull water through a plant sample while dynamically monitoring the flow rate and pressure gradients. The syringe setup presented here allows for controlling and rapidly changing flow and pressure conditions, enabling experimental assessment of rapid plant hydraulic responses to water stress. The setup also allows quantification of dynamic changes in water storage of plant samples. Our tests demonstrate that the syringe pump setup can reproduce hydraulic conductivity values measured using the current standard method based on pushing water under above-atmospheric pressure. Surprisingly, using both the traditional and our new syringe pump setup, we found a positive correlation between changes in flow rate and hydraulic conductivity. Moreover, when flow or pressure conditions were changed rapidly, we found substantial contributions to flow by dynamic and largely reversible changes in the water storage of plant samples. Although the measurements can be performed under sub-atmospheric pressures, it is not possible to subject the samples to negative pressures due to the presence of gas bubbles near the valves and pressure sensors. Regardless, this setup allows for unprecedented insights into the interplay between pressure, flow rate, hydraulic conductivity and water storage in plant segments. This work was performed using an Open Science approach with the original data and analysis to be found at https://doi.org/10.5281/zenodo.7322605.

Why it matches plant phenotyping methods植物セグメントの水理伝導度と水貯蔵変化を自然条件に近く測定する新規セットアップを開発・検証しており、植物生理状態の取得手法が研究の中心である。

abstractIn this paper, we present two methods for measuring hydraulic conductivity under closer to natural conditions, an artificial plant setup and a horizontal syringe pump setup.

A Deep Learning Framework for Processing and Classification of Hyperspectral Rice Seed Images Grown under High Day and Night Temperatures. →

A framework combining two powerful tools of hyperspectral imaging and deep learning for the processing and classification of hyperspectral images (HSI) of rice seeds is presented. A seed-based approach that trains a three-dimensional convolutional neural network (3D-CNN) using the full seed spectral hypercube for classifying the seed images from high day and high night temperatures, both including a control group, is developed. A pixel-based seed classification approach is implemented using a deep neural network (DNN). The seed and pixel-based deep learning architectures are validated and tested using hyperspectral images from five different rice seed treatments with six different high temperature exposure durations during day, night, and both day and night. A stand-alone application with Graphical User Interfaces (GUI) for calibrating, preprocessing, and classification of hyperspectral rice seed images is presented. The software application can be used for training two deep learning architectures for the classification of any type of hyperspectral seed images. The average overall classification accuracy of 91.33% and 89.50% is obtained for seed-based classification using 3D-CNN for five different treatments at each exposure duration and six different high temperature exposure durations for each treatment, respectively. The DNN gives an average accuracy of 94.83% and 91% for five different treatments at each exposure duration and six different high temperature exposure durations for each treatment, respectively. The accuracies obtained are higher than those presented in the literature for hyperspectral rice seed image classification. The HSI analysis presented here is on the Kitaake cultivar, which can be extended to study the temperature tolerance of other rice cultivars.

Why it matches plant phenotyping methodsハイパースペクトル画像からイネ種子の温度処理状態を分類する深層学習手法を開発・検証し、校正・前処理・分類用GUIも提供しており、種子表現型の取得・抽出方法が中心である。

abstractA framework combining two powerful tools of hyperspectral imaging and deep learning for the processing and classification of hyperspectral images (HSI) of rice seeds is presented.

Lightweight Detection System with Global Attention Network (GloAN) for Rice Lodging. →

Rice lodging seriously affects rice quality and production. Traditional manual methods of detecting rice lodging are labour-intensive and can result in delayed action, leading to production loss. With the development of the Internet of Things (IoT), unmanned aerial vehicles (UAVs) provide imminent assistance for crop stress monitoring. In this paper, we proposed a novel lightweight detection system with UAVs for rice lodging. We leverage UAVs to acquire the distribution of rice growth, and then our proposed global attention network (GloAN) utilizes the acquisition to detect the lodging areas efficiently and accurately. Our methods aim to accelerate the processing of diagnosis and reduce production loss caused by lodging. The experimental results show that our GloAN can lead to a significant increase in accuracy with negligible computational costs. We further tested the generalization ability of our GloAN and the results show that the GloAN generalizes well in peers' models (Xception, VGG, ResNet, and MobileNetV2) with knowledge distillation and obtains the optimal mean intersection over union (mIoU) of 92.85%. The experimental results show the flexibility of GloAN in rice lodging detection.

Why it matches plant phenotyping methodsUAV画像からイネの倒伏領域（植物状態）を抽出する軽量な検出システムとGloANを提案・評価しており、表現型取得・推定手法が中心である。

abstractwe proposed a novel lightweight detection system with UAVs for rice lodging.

δ 13 C as a tool for iron and phosphorus deficiency prediction in crops. →

Many studies proposed the use of stable carbon isotope ratio (δ 13 C) as a predictor of abiotic stresses in plants, considering only drought and nitrogen deficiency without further investigating the impact of other nutrient deficiencies, that is, phosphorus (P) and/or iron (Fe) deficiencies. To fill this knowledge gap, we assessed the δ 13 C of barley ( Hordeum vulgare L.), cucumber ( Cucumis sativus L.), maize ( Zea mays L.), and tomato ( Solanum lycopersicon L.) plants suffering from P, Fe, and combined P/Fe deficiencies during a two-week period using an isotope-ratio mass spectrometer. Simultaneously, plant physiological status was monitored with an infra-red gas analyzer. Results show clear contrasting time-, treatment-, species-, and tissue-specific variations. Furthermore, physiological parameters showed limited correlation with δ 13 C shifts, highlighting that the plants' δ 13 C, does not depend solely on photosynthetic carbon isotope fractionation/discrimination (Δ). Hence, the use of δ 13 C as a predictor is highly discouraged due to its inability to detect and discern different nutrient stresses, especially when combined stresses are present.

Why it matches plant phenotyping methodsδ13Cを用いた栄養ストレス予測法の有効性を複数作物で評価・検証しており、植物状態の推定手法の技術的妥当性が中心である。

titleδ 13 C as a tool for iron and phosphorus deficiency prediction in crops.

Rapid and Nondestructive Evaluation of Wheat Chlorophyll under Drought Stress Using Hyperspectral Imaging. →

Chlorophyll drives plant photosynthesis. Under stress conditions, leaf chlorophyll content changes dramatically, which could provide insight into plant photosynthesis and drought resistance. Compared to traditional methods of evaluating chlorophyll content, hyperspectral imaging is more efficient and accurate and benefits from being a nondestructive technique. However, the relationships between chlorophyll content and hyperspectral characteristics of wheat leaves with wide genetic diversity and different treatments have rarely been reported. In this study, using 335 wheat varieties, we analyzed the hyperspectral characteristics of flag leaves and the relationships thereof with SPAD values at the grain-filling stage under control and drought stress. The hyperspectral information of wheat flag leaves significantly differed between control and drought stress conditions in the 550-700 nm region. Hyperspectral reflectance at 549 nm (r = -0.64) and the first derivative at 735 nm (r = 0.68) exhibited the strongest correlations with SPAD values. Hyperspectral reflectance at 536, 596, and 674 nm, and the first derivatives bands at 756 and 778 nm, were useful for estimating SPAD values. The combination of spectrum and image characteristics (L*, a*, and b*) can improve the estimation accuracy of SPAD values (optimal performance of RFR, relative error, 7.35%; root mean square error, 4.439; R 2 , 0.61). The models established in this study are efficient for evaluating chlorophyll content and provide insight into photosynthesis and drought resistance. This study can provide a reference for high-throughput phenotypic analysis and genetic breeding of wheat and other crops.

Why it matches plant phenotyping methodsコムギ葉のハイパースペクトル画像と画像特徴からクロロフィル量を推定する手法を開発・評価しており、植物表現型の取得・推定が中心である。

abstractCompared to traditional methods of evaluating chlorophyll content, hyperspectral imaging is more efficient and accurate and benefits from being a nondestructive technique.

From root to shoot; Quantifying nematode tolerance in Arabidopsis thaliana by high-throughput phenotyping of plant development →

Abstract Nematode migration, feeding site formation, withdrawal of plant assimilates, and activation of plant defence responses have a significant impact on plant growth and development. Plants display intraspecific variation in tolerance limits for root-feeding nematodes. Although disease tolerance has been recognised as a distinct trait in biotic interactions of mainly crops, we lack mechanistic insights. Progress is hampered by difficulties in quantification and laborious screening methods. We turned to the model plant Arabidopsis thaliana , since it offers extensive resources to study the molecular and cellular mechanisms underlying nematode-plant interactions. Through imaging of tolerance-related parameters the green canopy area was identified as an accessible and robust measure for assessing damage due to cyst nematode infection. Subsequently, a high-throughput phenotyping platform simultaneously measuring the green canopy area growth of 960 A. thaliana plants was developed. This platform can accurately measure cyst- and root-knot nematode tolerance limits in A. thaliana through classical modelling of tolerance limits. Furthermore, real-time monitoring provided data for a novel view of tolerance, identifying a compensatory growth response. These findings show that our phenotyping platform will enable further studies into a mechanistic understanding of tolerance to below-ground biotic stress. Highlight The mechanisms of tolerance to root-parasitic nematodes remain unknown. We developed a high-throughput phenotyping system that enables unravelling the underlying mechanisms of tolerance to nematodes.

Why it matches plant phenotyping methods線虫耐性を評価するためのキャノピー画像計測と高スループット表現型解析プラットフォームの開発が研究の中心である。

abstractThrough imaging of tolerance-related parameters the green canopy area was identified as an accessible and robust measure for assessing damage due to cyst nematode infection.

Image‐based assessment of plant disease progression identifies new genetic loci for resistance to Ralstonia solanacearum in tomato →

A major challenge in global crop production is mitigating yield loss due to plant diseases. One of the best strategies to control these losses is through breeding for disease resistance. One barrier to the identification of resistance genes is the quantification of disease severity, which is typically based on the determination of a subjective score by a human observer. We hypothesized that image-based, non-destructive measurements of plant morphology over an extended period after pathogen infection would capture subtle quantitative differences between genotypes, and thus enable identification of new disease resistance loci. To test this, we inoculated a genetically diverse biparental mapping population of tomato (Solanum lycopersicum) with Ralstonia solanacearum, a soilborne pathogen that causes bacterial wilt disease. We acquired over 40 000 time-series images of disease progression in this population, and developed an image analysis pipeline providing a suite of 10 traits to quantify bacterial wilt disease based on plant shape and size. Quantitative trait locus (QTL) analyses using image-based phenotyping for single and multi-traits identified QTLs that were both unique and shared compared with those identified by human assessment of wilting, and could detect QTLs earlier than human assessment. Expanding the phenotypic space of disease with image-based, non-destructive phenotyping both allowed earlier detection and identified new genetic components of resistance.

Why it matches plant phenotyping methods画像解析パイプラインを開発し、植物形態から病害進展を定量化する方法が研究の中心であるため含める。

abstractExpanding the phenotypic space of disease with image-based, non-destructive phenotyping both allowed earlier detection and identified new genetic components of resistance.

Non-coding deep learning models for tomato biotic and abiotic stress classification using microscopic images. →

Plant disease classification is quite complex and, in most cases, requires trained plant pathologists and sophisticated labs to accurately determine the cause. Our group for the first time used microscopic images (×30) of tomato plant diseases, for which representative plant samples were diagnostically validated to classify disease symptoms using non-coding deep learning platforms (NCDL). The mean F1 scores (SD) of the NCDL platforms were 98.5 (1.6) for Amazon Rekognition Custom Label, 93.9 (2.5) for Clarifai, 91.6 (3.9) for Teachable Machine, 95.0 (1.9) for Google AutoML Vision, and 97.5 (2.7) for Microsoft Azure Custom Vision. The accuracy of the NCDL platform for Amazon Rekognition Custom Label was 99.8% (0.2), for Clarifai 98.7% (0.5), for Teachable Machine 98.3% (0.4), for Google AutoML Vision 98.9% (0.6), and for Apple CreateML 87.3 (4.3). Upon external validation, the model's accuracy of the tested NCDL platforms dropped no more than 7%. The potential future use for these models includes the development of mobile- and web-based applications for the classification of plant diseases and integration with a disease management advisory system. The NCDL models also have the potential to improve the early triage of symptomatic plant samples into classes that may save time in diagnostic lab sample processing.

Why it matches plant phenotyping methodsトマト葉の顕微鏡画像から病徴を分類する深層学習モデルを開発・比較し、外部検証まで実施しており、植物病害状態の表現型取得が中心である。

abstractUpon external validation, the model's accuracy of the tested NCDL platforms dropped no more than 7%.

High-Throughput Phenotyping using Computer Vision and Machine Learning →

High-throughput phenotyping refers to the non-destructive and efficient evaluation of plant phenotypes. In recent years, it has been coupled with machine learning in order to improve the process of phenotyping plants by increasing efficiency in handling large datasets and developing methods for the extraction of specific traits. Previous studies have developed methods to advance these challenges through the application of deep neural networks in tandem with automated cameras; however, the datasets being studied often excluded physical labels. In this study, we used a dataset provided by Oak Ridge National Laboratory with 1,672 images of Populus Trichocarpa with white labels displaying treatment (control or drought), block, row, position, and genotype. Optical character recognition (OCR) was used to read these labels on the plants, image segmentation techniques in conjunction with machine learning algorithms were used for morphological classifications, machine learning models were used to predict treatment based on those classifications, and analyzed encoded EXIF tags were used for the purpose of finding leaf size and correlations between phenotypes. We found that our OCR model had an accuracy of 94.31% for non-null text extractions, allowing for the information to be accurately placed in a spreadsheet. Our classification models identified leaf shape, color, and level of brown splotches with an average accuracy of 62.82%, and plant treatment with an accuracy of 60.08%. Finally, we identified a few crucial pieces of information absent from the EXIF tags that prevented the assessment of the leaf size. There was also missing information that prevented the assessment of correlations between phenotypes and conditions. However, future studies could improve upon this to allow for the assessment of these features.

Why it matches plant phenotyping methods画像分割、機械学習、OCRを用いて植物の葉形・色・斑点などの形態形質を抽出・分類し、精度も評価しており、植物フェノタイピング手法が中心である。

titleHigh-Throughput Phenotyping using Computer Vision and Machine Learning

Root system architecture and environmental flux analysis in mature crops using 3D root mesocosms →

Current methods of root sampling typically only obtain small or incomplete sections of root systems and do not capture their true complexity. To facilitate the visualization and analysis of full-sized plant root systems in 3-dimensions, we developed customized mesocosm growth containers. While highly scalable, the design presented here uses an internal volume of 45 ft 3 (1.27 m 3 ), suitable for large crop and bioenergy grass root systems to grow largely unconstrained. Furthermore, they allow for the excavation and preservation of 3-dimensional root system architecture (RSA), and facilitate the collection of time-resolved subterranean environmental data. Sensor arrays monitoring matric potential, temperature and CO 2 levels are buried in a grid formation at various depths to assess environmental fluxes at regular intervals. Methods of 3D data visualization of fluxes were developed to allow for comparison with root system architectural traits. Following harvest, the recovered root system can be digitally reconstructed in 3D through photogrammetry, which is an inexpensive method requiring only an appropriate studio space and a digital camera. We developed a pipeline to extract features from the 3D point clouds, or from derived skeletons that include point cloud voxel number as a proxy for biomass, total root system length, volume, depth, convex hull volume and solidity as a function of depth. Ground-truthing these features with biomass measurements from manually dissected root systems showed a high correlation. We evaluated switchgrass, maize, and sorghum root systems to highlight the capability for species wide comparisons. We focused on two switchgrass ecotypes, upland (VS16) and lowland (WBC3), in identical environments to demonstrate widely different root system architectures that may be indicative of core differences in their rhizoeconomic foraging strategies. Finally, we imposed a strong physiological water stress and manipulated the growth medium to demonstrate whole root system plasticity in response to environmental stimuli. Hence, these new "3D Root Mesocosms" and accompanying computational analysis provides a new paradigm for study of mature crop systems and the environmental fluxes that shape them.

Why it matches plant phenotyping methods3Dルートメソコスム、フォトグラメトリ、点群解析による根系形態形質の取得・検証が研究の中心であり、植物フェノタイピング手法に該当する。

abstractTo facilitate the visualization and analysis of full-sized plant root systems in 3-dimensions, we developed customized mesocosm growth containers.

Hyperspectral machine-learning model for screening tea germplasm resources with drought tolerance. →

Drought tolerance and quality stability are important indicators to evaluate the stress tolerance of tea germplasm resources. The traditional screening method of drought resistant germplasm is mainly to evaluate by detecting physiological and biochemical indicators of tea plants under drought stresses. However, the methods are not only time consuming but also destructive. In this study, hyperspectral images of tea drought phenotypes were obtained and modeled with related physiological indicators. The results showed that: (1) the information contents of malondialdehyde, soluble sugar and total polyphenol were 0.21, 0.209 and 0.227 respectively, and the drought tolerance coefficient (DTC) index of each tea variety was between 0.069 and 0.81; (2) the comprehensive drought tolerance of different varieties were (from strong to weak): QN36, SCZ, ZC108, JX, JGY, XY10, QN1, MS9, QN38 , and QN21 ; (3) by using SVM, RF and PLSR to model DTC (drought tolerance coefficient) data, the best prediction model was selected as MSC-2D-UVE-SVM (R 2 = 0.77, RMSE = 0.073, MAPE = 0.16) for drought tolerance of tea germplasm resources, named Tea-DTC model. Therefore, the Tea-DTC model based on hyperspectral machine-learning technology can be used as a new screening method for evaluating tea germplasm resources with drought tolerance.

Why it matches plant phenotyping methods茶樹の乾燥耐性という植物状態をハイパースペクトル画像と機械学習で推定するモデルを開発し、従来の生理・生化学指標に代わるスクリーニング手法として性能評価しているため、フェノタイピング手法が中心である。

abstractIn this study, hyperspectral images of tea drought phenotypes were obtained and modeled with related physiological indicators.

An image dataset of diverse safflower ( Carthamus tinctorius L.) genotypes for salt response phenotyping. →

This article describes a dataset of high-resolution visible-spectrum images of safflower ( Carthamus tinctorius L.) plants obtained from a LemnaTec Scanalyser automated phenomics platform along with the associated image analysis output and manually acquired biomass data. This series contains 1832 images of 200 diverse safflower genotypes, acquired at the Plant Phenomics Victoria, Horsham, Victoria, Australia. Two Prosilica GT RGB (red-green-blue) cameras were used to generate 6576 × 4384 pixel portable network graphic (PNG) images. Safflower genotypes were either subjected to a salt treatment (250 mM NaCl) or grown as a control (0 mM NaCl) and imaged daily from 15 to 36 days after sowing. Each snapshot consists of four images collected at a point in time; one of which is taken from above (top-view) and the remainder from the side at either 0°, 120° or 240°. The dataset also includes analysis output quantifying traits and describing phenotypes, as well as manually collected biomass and leaf ion content data. The usage of the dataset is already demonstrated in Thoday-Kennedy et al. (2021) [1]. This dataset describes the early growth differences of diverse safflower genotypes and identified genotypes tolerant or susceptible to salinity stress. This dataset provides detailed image analysis parameters for phenotyping a large population of safflower that can be used for the training of image-based trait identification pipelines for a wide range of crop species.

Why it matches plant phenotyping methods高スループット画像データセットと画像解析出力、形質定量パラメータを提供しており、植物フェノタイピング手法・再利用可能なデータ資源が中心である。

abstractThis article describes a dataset of high-resolution visible-spectrum images of safflower ( Carthamus tinctorius L.) plants obtained from a LemnaTec Scanalyser automated phenomics platform along with the associated image analysis output and manually acquired biomass data.

A protocol for increased throughput phenotyping of plant resistance to the pollen beetle. →

Background Improving crop resistance to insect herbivores is a major research objective in breeding programs. Although genomic technologies have increased the speed at which large populations can be genotyped, breeding programs still suffer from phenotyping constraints. The pollen beetle (Brassicogethes aeneus) is a major pest of oilseed rape for which no resistant cultivar is available to date, but previous studies have highlighted the potential of white mustard as a source of resistance and introgression of this resistance appears to be a promising strategy. Here we present a phenotyping protocol allowing mid-throughput (i.e., increased throughput compared to current methods) acquisition of resistance data, which could then be used for genetic mapping of QTLs. Results Contrasted white mustard genotypes were selected from an initial field screening and then evaluated for their resistance under controlled conditions using a standard phenotyping method on entire plants. We then upgraded this protocol for mid-throughput phenotyping, by testing two alternative methods. We found that phenotyping on detached buds did not provide the same resistance contrasts as observed with the standard protocol, in contrast to the phenotyping protocol with miniaturized plants. This protocol was then tested on a large panel composed of hundreds of plants. A significant variation in resistance among genotypes was observed, which validates the large-scale application of this new phenotyping protocol. Conclusion The combination of this mid-throughput phenotyping protocol and white mustard as a source of resistance against the pollen beetle offers a promising avenue for breeding programs aiming to improve oilseed rape resistance. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Why it matches plant phenotyping methods植物の害虫抵抗性を取得する中スループット表現型プロトコルを開発し、代替法との比較検証と大規模適用まで行っており、表現型取得法が研究の中心である。

abstractHere we present a phenotyping protocol allowing mid-throughput (i.e., increased throughput compared to current methods) acquisition of resistance data, which could then be used for genetic mapping of QTLs.

Plant Growth Promotion and Heat Stress Amelioration in Arabidopsis Inoculated with Paraburkholderia phytofirmans PsJN Rhizobacteria Quantified with the GrowScreen-Agar II Phenotyping Platform →

High temperatures inhibit plant growth. A proposed strategy for improving plant productivity under elevated temperatures is the use of plant growth-promoting rhizobacteria (PGPR). While the effects of PGPR on plant shoots have been extensively explored, roots—particularly their spatial and temporal dynamics—have been hard to study, due to their below-ground nature. Here, we characterized the time- and tissue-specific morphological changes in bacterized plants using a novel non-invasive high-resolution plant phenotyping and imaging platform—GrowScreen-Agar II. The platform uses custom-made agar plates, which allow air exchange to occur with the agar medium and enable the shoot to grow outside the compartment. The platform provides light protection to the roots, the exposure of it to the shoots, and the non-invasive phenotyping of both organs. Arabidopsis thaliana, co-cultivated with Paraburkholderia phytofirmans PsJN at elevated and ambient temperatures, showed increased lengths, growth rates, and numbers of roots. However, the magnitude and direction of the growth promotion varied depending on root type, timing, and temperature. The root length and distribution per depth and according to time was also influenced by bacterization and the temperature. The shoot biomass increased at the later stages under ambient temperature in the bacterized plants. The study offers insights into the timing of the tissue-specific, PsJN-induced morphological changes and should facilitate future molecular and biochemical studies on plant–microbe–environment interactions.

Why it matches plant phenotyping methodsGrowScreen-Agar IIという非侵襲的な高解像度フェノタイピング・イメージングプラットフォームを用い、根とシュートの形態を時空間的に測定することが研究の中心的手法です。

abstractwe characterized the time- and tissue-specific morphological changes in bacterized plants using a novel non-invasive high-resolution plant phenotyping and imaging platform—GrowScreen-Agar II.

High-Throughput Phenotyping of Cross-Sectional Morphology to Assess Stalk Mechanical Properties in Sorghum →

Lodging is one of the major constraints in attaining high yield in crop production. Major factors associated with stalk lodging involve morphological traits and anatomical features along with the chemical composition of the stem. However, little relevant research has been carried out in sorghum, particularly on the anatomical aspects. In this study, with a high-throughput procedure newly developed by our research group, the nine parameters related to stem regions and vascular bundles were generated in 58 sorghum germplasm accessions grown in two successive seasons. Correlation analysis and principal component analysis were conducted to investigate the relationship between anatomical aspects and stalk mechanical traits (breaking force, stalk strength and lodging index). It was found that most vascular parameters were positively associated with breaking force and lodging index with the correlation coefficient r varying from −0.46 to 0.64, whereas stalk strength was only associated with rind area with the r = 0.38. The germplasm resources can be divided into two contrasting categories (classes I with 23 accessions and II with 30 accessions). Compared to class II, the class I was characterized by a larger number (+40.7%) and bigger vascular bundle (+30%), thicker stem (+19.6%) and thicker rind (+36.0%) but shorter internode (plant) (−91.0%). This study provides the methodology and information for the studies of the stem anatomical parameters in crops and facilitates the selective breeding of sorghum.

Why it matches plant phenotyping methodsソルガム茎の断面形態・維管束形質を抽出する新規ハイスループット手順が研究の中心であり、機械的特性との関連も評価しているため。

abstractwith a high-throughput procedure newly developed by our research group, the nine parameters related to stem regions and vascular bundles were generated

Time-series multispectral imaging in soybean for improving biomass and genomic prediction accuracy. →

Multispectral (MS) imaging enables the measurement of characteristics important for increasing the prediction accuracy of genotypic and phenotypic values for yield-related traits. In this study, we evaluated the potential application of temporal MS imaging for the prediction of aboveground biomass (AGB) in soybean [Glycine max (L.) Merr.]. Field experiments with 198 accessions of soybean were conducted with four different irrigation levels. Five vegetation indices (VIs) were calculated using MS images from soybean canopies from early vegetative to early reproductive stage. To predict the genotypic values of AGB, VIs at the different growth stages were used as secondary traits in a multitrait genomic prediction. The prediction accuracy of the genotypic values of AGB from MS and genomic data largely outperformed that of the genomic data alone before the flowering stage (90% of accessions did not flower), suggesting that it would be possible to determine cross-combinations based on the predicted genotypic values of AGB. We compared the prediction accuracy of a model using the five VIs and a model using only one VI to predict the phenotypic values of AGB and found that the difference in prediction accuracy decreased over time at all irrigation levels except for the most severe drought. The difference in the most severe drought was not as small as that in the other treatments. Only the prediction accuracy of a model using the five VIs in the most severe droughts gradually increased over time. Therefore, the optimal timing for MS imaging may depend on the irrigation levels.

Why it matches plant phenotyping methods大豆の地上部バイオマスを推定するための時系列マルチスペクトル画像と植生指数を中心に、予測精度および撮像時期を評価しているため、植物表現型計測手法の実質的な適用・検証に該当する。

abstractMultispectral (MS) imaging enables the measurement of characteristics important for increasing the prediction accuracy of genotypic and phenotypic values for yield-related traits.

Earbox, an open tool for high-throughput measurement of the spatial organization of maize ears and inference of novel traits. →

Background Characterizing plant genetic resources and their response to the environment through accurate measurement of relevant traits is crucial to genetics and breeding. Spatial organization of the maize ear provides insights into the response of grain yield to environmental conditions. Current automated methods for phenotyping the maize ear do not capture these spatial features. Results We developed EARBOX, a low-cost, open-source system for automated phenotyping of maize ears. EARBOX integrates open-source technologies for both software and hardware that facilitate its deployment and improvement for specific research questions. The imaging platform consists of a customized box in which ears are repeatedly imaged as they rotate via motorized rollers. With deep learning based on convolutional neural networks, the image analysis algorithm uses a two-step procedure: ear-specific grain masks are first created and subsequently used to extract a range of trait data per ear, including ear shape and dimensions, the number of grains and their spatial organisation, and the distribution of grain dimensions along the ear. The reliability of each trait was validated against ground-truth data from manual measurements. Moreover, EARBOX derives novel traits, inaccessible through conventional methods, especially the distribution of grain dimensions along grain cohorts, relevant for ear morphogenesis, and the distribution of abortion frequency along the ear, relevant for plant response to stress, especially soil water deficit. Conclusions The proposed system provides robust and accurate measurements of maize ear traits including spatial features. Future developments include grain type and colour categorisation. This method opens avenues for high-throughput genetic or functional studies in the context of plant adaptation to a changing environment.

Why it matches plant phenotyping methodsトウモロコシ雌穂の画像取得・深層学習による形質抽出システムを開発し、手動測定との比較で各形質の信頼性を検証しており、植物フェノタイピング手法が研究の中心です。

abstractWe developed EARBOX, a low-cost, open-source system for automated phenotyping of maize ears.

Applicability of hyperspectral imaging during salinity stress in rice for tracking Na+ and K+ levels in planta. →

The ratio of Na+ and K+ is an important determinant of the magnitude of Na+ toxicity and osmotic stress in plant cells. Traditional analytical approaches involve destructive tissue sampling and chemical analysis, where real-time observation of spatio-temporal experiments across genetic or breeding populations is unrealistic. Such an approach can also be very inaccurate and prone to erroneous biological interpretation. Analysis by Hyperspectral Imaging (HSI) is an emerging non-destructive alternative for tracking plant nutrient status in a time-course with higher accuracy and reduced cost for chemical analysis. In this study, the feasibility and predictive power of HSI-based approach for spatio-temporal tracking of Na+ and K+ levels in tissue samples was explored using a panel recombinant inbred line (RIL) of rice (Oryza sativa L.; salt-sensitive IR29 x salt-tolerant Pokkali) with differential activities of the Na+ exclusion mechanism conferred by the SalTol QTL. In this panel of RILs the spectrum of salinity tolerance was represented by FL499 (super-sensitive), FL454 (sensitive), FL478 (tolerant), and FL510 (super-tolerant). Whole-plant image processing pipeline was optimized to generate HSI spectra during salinity stress at EC = 9 dS m-1. Spectral data was used to create models for Na+ and K+ prediction by partial least squares regression (PLSR). Three datasets, i.e., mean image pixel spectra, smoothened version of mean image pixel spectra, and wavelength bands, with wide differences in intensity between control and salinity facilitated the prediction models with high R2. The smoothened and filtered datasets showed significant improvements over the mean image pixel dataset. However, model prediction was not fully consistent with the empirical data. While the outcome of modeling-based prediction showed a great potential for improving the throughput capacity for salinity stress phenotyping, additional technical refinements including tissue-specific measurements is necessary to maximize the accuracy of prediction models.

Why it matches plant phenotyping methods塩ストレス下のイネに対するHSI画像処理パイプラインとPLSR予測モデルを開発・評価し、Na+・K+という植物生理状態の非破壊フェノタイピングへの適用性と予測性能を検証しているため、方法が中心的である。

abstractAnalysis by Hyperspectral Imaging (HSI) is an emerging non-destructive alternative for tracking plant nutrient status in a time-course with higher accuracy and reduced cost for chemical analysis.

PSFD-Musa: A dataset of banana plant, stem, fruit, leaf, and disease. →

In recent times, the classification and identification of different fruits and food crops have become a necessity in the field of agricultural science; for sustainable growth. Probable processes have been developed worldwide to improve the production of food crops. Problem-specific, clean and crisp datasets are also lagging in the sector. This article introduces an image dataset of varieties of banana plants and the diseases related to them. The varieties of Banana plants that we have considered in the dataset are the Malbhog ( Musa assamica ), Jahaji ( Musa chinensis ), Kachkol ( Musa paradisiaca L. ), Bhimkol ( M. Balbisiana Colla ). And the diseases and pathogens that we have considered here are the Bacterial Soft Rot, Banana Fruit Scarring Beetle, Black Sigatoka, Yellow Sigatoka, Panama disease, Banana Aphids, and Pseudo-Stem Weevil. A dataset of Potassium deficiency has been also considered in this article. A total of 8000+ processed images are present in the dataset. The purpose of this article is to provide the Researchers and Students in getting access to our dataset that would help them in their research and in developing some machine learning models.

Why it matches plant phenotyping methodsバナナ植物の器官・品種・病害・カリウム欠乏を画像化した大規模データセットを提供しており、植物の状態推定に再利用できるデータ基盤が中心である。

abstractThis article introduces an image dataset of varieties of banana plants and the diseases related to them.

Sandwich Enzyme-Linked Immunosorbent Assay for Quantification of Callose. →

The existing methods of callose quantification include epifluorescence microscopy and fluorescence spectrophotometry of aniline blue-stained callose particles, immuno-fluorescence microscopy and indirect assessment of both callose synthase and β-(1,3)-glucanase enzyme activities. Some of these methods are laborious, time consuming, not callose-specific, biased and require high technical skills. Here, we describe a method of callose quantification based on Sandwich Enzyme-Linked Immunosorbent Assay (S-ELISA). Tissue culture-derived banana plantlets were inoculated with Xanthomonas campestris pv. musacearum ( Xcm ) bacteria as a biotic stress factor inducing callose production. Banana leaf, pseudostem and corm tissue samples were collected at 14 days post-inoculation (dpi) for callose quantification. Callose levels were significantly different in banana tissues of Xcm -inoculated and control groups except in the pseudostems of both banana genotypes. The method described here could be applied for the quantification of callose in different plant species with satisfactory level of specificity to callose, and reproducibility. Additionally, the use of 96-well plate makes this method suitable for high throughput callose quantification studies with minimal sampling and analysis biases. We provide step-by-step detailed descriptions of the method.

Why it matches plant phenotyping methods植物組織中のカロース量を定量するELISA法を開発・再現性評価し、高スループット測定への適用性を示した研究であり、植物状態の取得方法が中心です。

abstractHere, we describe a method of callose quantification based on Sandwich Enzyme-Linked Immunosorbent Assay (S-ELISA).

Physiological responses of plants to in vivo XRF radiation damage: insights from elemental, histochemical, anatomical and ultrastructural analyses →

X-ray fluorescence spectroscopy (XRF) is a powerful technique for the in vivo assessment of plant tissues. However, the potential X-ray exposure damages might affect the structure and elemental composition of living plant tissues leading to artefacts in the recorded data. Herein, we exposed soybean (Glycine max (L.) Merrill) leaves to several X-ray doses through a polychromatic benchtop microprobe X-ray fluorescence spectrometer, modulating the photon flux by adjusting either the beam size, focus, or exposure time. The structure, ultrastructure and physiological responses of the irradiated plant tissues were investigated through light and transmission electron microscopy (TEM). Depending on the dose, the X-ray exposure induced decreased K and X-ray scattering intensities, and increased Ca, P, and Mn signals on soybean leaves. Anatomical analysis indicated necrosis of the epidermal and mesophyll cells on the irradiated spots, where TEM images revealed the collapse of cytoplasm and cell-wall breaking. Furthermore, the histochemical analysis detected the production of reactive oxygen species, as well as inhibition of chlorophyll autofluorescence in these areas. Under certain X-ray exposure conditions, e.g., high photon flux and exposure time, XRF measurements may affect the soybean leaves structures, elemental composition, and cellular ultrastructure, and induce programmed cell death. These results shed light on the characterization of the radiation damage, and thus, help to assess the X-ray radiation limits and strategies for in vivo for XRF analysis. HighlightBy exposing soybean leaves to several X-ray doses, we show that the characteristic X-ray induced elemental changes stem from plants physiological signalling or responses rather than only sample dehydration.

Why it matches plant phenotyping methods植物組織のin vivo XRF測定における放射線損傷と測定アーティファクトを評価し、適用限界と測定条件を検証する研究であり、フェノタイピング手法の技術的妥当性が中心です。

abstractX-ray fluorescence spectroscopy (XRF) is a powerful technique for the in vivo assessment of plant tissues.

Rice bacterial blight resistant cultivar selection based on visible/near-infrared spectrum and deep learning. →

BACKGROUND: Rice bacterial blight (BB) has caused serious damage in rice yield and quality leading to huge economic loss and food safety problems. Breeding disease resistant cultivar becomes the eco-friendliest and most effective alternative to regulate its outburst, since the propagation of pathogenic bacteria is restrained. However, the BB resistance cultivar selection suffers tremendous labor cost, low efficiency, and subjective human error. And dynamic rice BB phenotyping study is absent from exploring the pattern of BB growth with different genotypes. RESULTS: In this paper, with the aim of alleviating the labor burden of plant breeding experts in the resistant cultivar screening processing and exploring the disease resistance phenotyping variation pattern, visible/near-infrared (VIS-NIR) hyperspectral images of rice leaves from three varieties after inoculation were collected and sent into a self-built deep learning model LPnet for disease severity assessment. The growth status of BB lesion at the time scale was fully revealed. On the strength of the attention mechanism inside LPnet, the most informative spectral features related to lesion proportion were further extracted and combined into a novel and refined leaf spectral index. The effectiveness and feasibility of the proposed wavelength combination were verified by identifying the resistant cultivar, assessing the resistant ability, and spectral image visualization. CONCLUSIONS: This study illustrated that informative VIS-NIR spectrums coupled with attention deep learning had great potential to not only directly assess disease severity but also excavate spectral characteristics for rapid screening disease resistant cultivars in high-throughput phenotyping.

Why it matches plant phenotyping methodsイネ葉のハイパースペクトル画像と深層学習により病斑割合・病害重症度を推定し、抵抗性品種選抜へ応用する手法が研究の中心である。

abstractinformative VIS-NIR spectrums coupled with attention deep learning had great potential to not only directly assess disease severity but also excavate spectral characteristics for rapid screening disease resistant cultivars in high-throughput phenotyping.

Root Pulling Force Across Drought in Maize Reveals Genotype by Environment Interactions and Candidate Genes. →

High-throughput, field-based characterization of root systems for hundreds of genotypes in thousands of plots is necessary for breeding and identifying loci underlying variation in root traits and their plasticity. We designed a large-scale sampling of root pulling force, the vertical force required to extract the root system from the soil, in a maize diversity panel under differing irrigation levels for two growing seasons. We then characterized the root system architecture of the extracted root crowns. We found consistent patterns of phenotypic plasticity for root pulling force for a subset of genotypes under differential irrigation, suggesting that root plasticity is predictable. Using genome-wide association analysis, we identified 54 SNPs as statistically significant for six independent root pulling force measurements across two irrigation levels and four developmental timepoints. For every significant GWAS SNP for any trait in any treatment and timepoint we conducted post hoc tests for genotype-by-environment interaction, using a mixed model ANOVA. We found that 8 of the 54 SNPs showed significant GxE. Candidate genes underlying variation in root pulling force included those involved in nutrient transport. Although they are often treated separately, variation in the ability of plant roots to sense and respond to variation in environmental resources including water and nutrients may be linked by the genes and pathways underlying this variation. While functional validation of the identified genes is needed, our results expand the current knowledge of root phenotypic plasticity at the whole plant and gene levels, and further elucidate the complex genetic architecture of maize root systems.

Why it matches plant phenotyping methods数百遺伝子型・数千区画を対象とする高スループットな圃場根系表現型測定を設計・適用し、根抜き力と根系構造を取得している。主目的は遺伝解析だが、表現型取得手法の大規模適用が実質的に記述されているため採録する。

abstractHigh-throughput, field-based characterization of root systems for hundreds of genotypes in thousands of plots is necessary for breeding and identifying loci underlying variation in root traits and their plasticity.

Non-destructive Plant Biomass Monitoring With High Spatio-Temporal Resolution via Proximal RGB-D Imagery and End-to-End Deep Learning →

Plant breeders, scientists, and commercial producers commonly use growth rate as an integrated signal of crop productivity and stress. Plant growth monitoring is often done destructively via growth rate estimation by harvesting plants at different growth stages and simply weighing each individual plant. Within plant breeding and research applications, and more recently in commercial applications, non-destructive growth monitoring is done using computer vision to segment plants in images from the background, either in 2D or 3D, and relating these image-based features to destructive biomass measurements. Recent advancements in machine learning have improved image-based localization and detection of plants, but such techniques are not well suited to make biomass predictions when there is significant self-occlusion or occlusion from neighboring plants, such as those encountered under leafy green production in controlled environment agriculture. To enable prediction of plant biomass under occluded growing conditions, we develop an end-to-end deep learning approach that directly predicts lettuce plant biomass from color and depth image data as provided by a low cost and commercially available sensor. We test the performance of the proposed deep neural network for lettuce production, observing a mean prediction error of 7.3% on a comprehensive test dataset of 864 individuals and substantially outperforming previous work on plant biomass estimation. The modeling approach is robust to the busy and occluded scenes often found in commercial leafy green production and requires only measured mass values for training. We then demonstrate that this level of prediction accuracy allows for rapid, non-destructive detection of changes in biomass accumulation due to experimentally induced stress induction in as little as 2 days. Using this method growers may observe and react to changes in plant-environment interactions in near real time. Moreover, we expect that such a sensitive technique for non-destructive biomass estimation will enable novel research and breeding of improved productivity and yield in response to stress.

Why it matches plant phenotyping methodsRGB-D画像と深層学習を用いて、遮蔽下のレタス個体バイオマスを非破壊推定する手法を開発・評価しており、植物表現型取得が研究の中心です。

abstractwe develop an end-to-end deep learning approach that directly predicts lettuce plant biomass from color and depth image data as provided by a low cost and commercially available sensor.

Genetic analysis reveals three novel QTLs underpinning a butterfly egg-induced hypersensitive response-like cell death in Brassica rapa. →

BACKGROUND: Cabbage white butterflies (Pieris spp.) can be severe pests of Brassica crops such as Chinese cabbage, Pak choi (Brassica rapa) or cabbages (B. oleracea). Eggs of Pieris spp. can induce a hypersensitive response-like (HR-like) cell death which reduces egg survival in the wild black mustard (B. nigra). Unravelling the genetic basis of this egg-killing trait in Brassica crops could improve crop resistance to herbivory, reducing major crop losses and pesticides use. Here we investigated the genetic architecture of a HR-like cell death induced by P. brassicae eggs in B. rapa. RESULTS: A germplasm screening of 56 B. rapa accessions, representing the genetic and geographical diversity of a B. rapa core collection, showed phenotypic variation for cell death. An image-based phenotyping protocol was developed to accurately measure size of HR-like cell death and was then used to identify two accessions that consistently showed weak (R-o-18) or strong cell death response (L58). Screening of 160 RILs derived from these two accessions resulted in three novel QTLs for Pieris brassicae-induced cell death on chromosomes A02 (Pbc1), A03 (Pbc2), and A06 (Pbc3). The three QTLs Pbc1-3 contain cell surface receptors, intracellular receptors and other genes involved in plant immunity processes, such as ROS accumulation and cell death formation. Synteny analysis with A. thaliana suggested that Pbc1 and Pbc2 are novel QTLs associated with this trait, while Pbc3 also contains an ortholog of LecRK-I.1, a gene of A. thaliana previously associated with cell death induced by a P. brassicae egg extract. CONCLUSIONS: This study provides the first genomic regions associated with the Pieris egg-induced HR-like cell death in a Brassica crop species. It is a step closer towards unravelling the genetic basis of an egg-killing crop resistance trait, paving the way for breeders to further fine-map and validate candidate genes.

Why it matches plant phenotyping methodsHR様細胞死のサイズを定量する画像ベース表現型解析プロトコルを開発し、遺伝解析に実質的に使用しているため、植物フェノタイピング手法が中心的です。

abstractAn image-based phenotyping protocol was developed to accurately measure size of HR-like cell death

Chemical Fingerprinting of Heat Stress Responses in the Leaves of Common Wheat by Fourier Transform Infrared Spectroscopy. →

Wheat ( Triticum aestivum L.) is known to be negatively affected by heat stress, and its production is threatened by global warming, particularly in arid regions. Thus, efforts to better understand the molecular responses of wheat to heat stress are required. In the present study, Fourier transform infrared (FTIR) spectroscopy, coupled with chemometrics, was applied to develop a protocol that monitors chemical changes in common wheat under heat stress. Wheat plants at the three-leaf stage were subjected to heat stress at a 42 °C daily maximum temperature for 3 days, and this led to delayed growth in comparison to that of the control. Measurement of FTIR spectra and their principal component analysis showed partially overlapping features between heat-stressed and control leaves. In contrast, supervised machine learning through linear discriminant analysis (LDA) of the spectra demonstrated clear discrimination of heat-stressed leaves from the controls. Analysis of LDA loading suggested that several wavenumbers in the fingerprinting region (400-1800 cm -1 ) contributed significantly to their discrimination. Novel spectrum-based biomarkers were developed using these discriminative wavenumbers that enabled the successful diagnosis of heat-stressed leaves. Overall, these observations demonstrate the versatility of FTIR-based chemical fingerprints for use in heat-stress profiling in wheat.

Why it matches plant phenotyping methodsFTIRとケモメトリクスを用いて熱ストレス葉の化学的状態を識別・診断するプロトコルとバイオマーカーを開発しており、植物状態の取得・抽出が中心的です。

abstractFourier transform infrared (FTIR) spectroscopy, coupled with chemometrics, was applied to develop a protocol that monitors chemical changes in common wheat under heat stress.

Phenotyping and Quantitative Trait Locus Analysis for the Limited Transpiration Trait in an Upper-Mid South Soybean Recombinant Inbred Line Population ("Jackson" × "KS4895"): High Throughput Aquaporin Inhibitor Screening. →

Soybean is most often grown under rainfed conditions and negatively impacted by drought stress in the upper mid-south of the United States. Therefore, identification of drought-tolerance traits and their corresponding genetic components are required to minimize drought impacts on productivity. Limited transpiration (TR lim ) under high vapor pressure deficit (VPD) is one trait that can help conserve soybean water-use during late-season drought. The main research objective was to evaluate a recombinant inbred line (RIL) population, from crossing two mid-south soybean lines ("Jackson" × "KS4895"), using a high-throughput technique with an aquaporin inhibitor, AgNO 3 , for the TR lim trait. A secondary objective was to undertake a genetic marker/quantitative trait locus (QTL) genetic analysis using the AgNO 3 phenotyping results. A set of 122 soybean genotypes (120-RILs and parents) were grown in controlled environments (32/25-d/n °C). The transpiration rate (TR) responses of derooted soybean shoots before and after application of AgNO 3 were measured under 37°C and >3.0 kPa VPD. Then, the decrease in transpiration rate (DTR) for each genotype was determined. Based on DTR rate, a diverse group (slow, moderate, and high wilting) of 26 RILs were selected and tested for the whole plant TRs under varying levels of VPD (0.0-4.0 kPa) at 32 and 37°C. The phenotyping results showed that 88% of slow, 50% of moderate, and 11% of high wilting genotypes expressed the TR lim trait at 32°C and 43, 10, and 0% at 37°C, respectively. Genetic mapping with the phenotypic data we collected revealed three QTL across two chromosomes, two associated with TR lim traits and one associated with leaf temperature. Analysis of Gene Ontologies of genes within QTL regions identified several intriguing candidate genes, including one gene that when overexpressed had previously been shown to confer enhanced tolerance to abiotic stress. Collectively these results will inform and guide ongoing efforts to understand how to deploy genetic tolerance for drought stress.

Why it matches plant phenotyping methodsAgNO3を用いた高スループット測定法でダイズの蒸散制限形質を取得し、表現型データをQTL解析に用いており、フェノタイピング手法の適用が研究の中心です。

abstractThe main research objective was to evaluate a recombinant inbred line (RIL) population, from crossing two mid-south soybean lines ("Jackson" × "KS4895"), using a high-throughput technique with an aquaporin inhibitor, AgNO 3 , for the TR lim trait.

Oxidative damage and DNA repair in desiccated recalcitrant embryonic axes of Acer pseudoplatanus L. →

Background Most plants encounter water stress at one or more different stages of their life cycle. The maintenance of genetic stability is the integral component of desiccation tolerance that defines the storage ability and long-term survival of seeds. Embryonic axes of desiccation-sensitive recalcitrant seeds of Acer pseudoplatnus L. were used to investigate the genotoxic effect of desiccation. Alkaline single-cell gel electrophoresis (comet assay) methodology was optimized and used to provide unique insights into the onset and repair of DNA strand breaks and 8-oxo-7,8-dihydroguanine (8-oxoG) formation during progressive steps of desiccation and rehydration. Results The loss of DNA integrity and impairment of damage repair were significant predictors of the viability of embryonic axes. In contrast to the comet assay, automated electrophoresis failed to detect changes in DNA integrity resulting from desiccation. Notably, no significant correlation was observed between hydroxyl radical ( ٠ OH) production and 8-oxoG formation, although the former is regarded to play a major role in guanine oxidation. Conclusions The high-throughput comet assay represents a sensitive tool for monitoring discrete changes in DNA integrity and assessing the viability status in plant germplasm processed for long-term storage.

Why it matches plant phenotyping methods植物胚軸のDNA完全性と生存性を評価する高スループットコメットアッセイを最適化・検証しており、表現型状態の取得法が研究の中心である。

abstractAlkaline single-cell gel electrophoresis (comet assay) methodology was optimized and used to provide unique insights into the onset and repair of DNA strand breaks

Exploiting High-Throughput Indoor Phenotyping to Characterize the Founders of a Structured B. napus Breeding Population. →

Phenotyping is considered a significant bottleneck impeding fast and efficient crop improvement. Similar to many crops, Brassica napus, an internationally important oilseed crop, suffers from low genetic diversity, and will require exploitation of diverse genetic resources to develop locally adapted, high yielding and stress resistant cultivars. A pilot study was completed to assess the feasibility of using indoor high-throughput phenotyping (HTP), semi-automated image processing, and machine learning to capture the phenotypic diversity of agronomically important traits in a diverse B. napus breeding population, SKBnNAM, introduced here for the first time. The experiment comprised 50 spring-type B. napus lines, grown and phenotyped in six replicates under two treatment conditions (control and drought) over 38 days in a LemnaTec Scanalyzer 3D facility. Growth traits including plant height, width, projected leaf area, and estimated biovolume were extracted and derived through processing of RGB and NIR images. Anthesis was automatically and accurately scored (97% accuracy) and the number of flowers per plant and day was approximated alongside relevant canopy traits (width, angle). Further, supervised machine learning was used to predict the total number of raceme branches from flower attributes with 91% accuracy (linear regression and Huber regression algorithms) and to identify mild drought stress, a complex trait which typically has to be empirically scored (0.85 area under the receiver operating characteristic curve, random forest classifier algorithm). The study demonstrates the potential of HTP, image processing and computer vision for effective characterization of agronomic trait diversity in B. napus, although limitations of the platform did create significant variation that limited the utility of the data. However, the results underscore the value of machine learning for phenotyping studies, particularly for complex traits such as drought stress resistance.

Why it matches plant phenotyping methods屋内ハイスループット表現型解析、画像処理、機械学習を用いて作物形質を抽出・予測し、プラットフォーム性能も評価しているため、方法が研究の中心である。

abstractA pilot study was completed to assess the feasibility of using indoor high-throughput phenotyping (HTP), semi-automated image processing, and machine learning to capture the phenotypic diversity of agronomically important traits

High throughput phenotyping of cross-sectional morphology to assess stalk lodging resistance. →

Abstract Background Stalk lodging (mechanical failure of plant stems during windstorms) leads to global yield losses in cereal crops estimated to range from 5% to 25% annually. The cross-sectional morphology of plant stalks is a key determinant of stalk lodging resistance. However, previously developed techniques for quantifying cross-sectional morphology of plant stalks are relatively low-throughput, expensive and often require specialized equipment and expertise. There is need for a simple and cost-effective technique to quantify plant traits related to stalk lodging resistance in a high-throughput manner. Results A new phenotyping methodology was developed and applied to a range of plant samples including, maize ( Zea mays ), sorghum ( Sorghum bicolor ), wheat ( Triticum aestivum ), poison hemlock ( Conium maculatum ), and Arabidopsis (Arabis thaliana). The major diameter, minor diameter, rind thickness and number of vascular bundles were quantified for each of these plant types. Linear correlation analyses demonstrated strong agreement between the newly developed method and more time-consuming manual techniques (R 2 > 0.9). In addition, the new method was used to generate several specimen-specific finite element models of plant stalks. All the models compiled without issue and were successfully imported into finite element software for analysis. All the models demonstrated reasonable and stable solutions when subjected to realistic applied loads. Conclusions A rapid, low-cost, and user-friendly phenotyping methodology was developed to quantify two-dimensional plant cross-sections. The methodology offers reduced sample preparation time and cost as compared to previously developed techniques. The new methodology employs a stereoscope and a semi-automated image processing algorithm. The algorithm can be used to produce specimen-specific, dimensionally accurate computational models (including finite element models) of plant stalks.

Why it matches plant phenotyping methods植物茎の横断面形態を高スループットに定量する画像ベースの表現型計測法を開発し、手作業法との一致性検証と有限要素モデルへの応用を行っており、方法が研究の中心である。

abstractA new phenotyping methodology was developed and applied to a range of plant samples

Ensemble Averaging of Transfer Learning Models for Identification of Nutritional Deficiency in Rice Plant →

Computer vision-based automation has become popular in detecting and monitoring plants’ nutrient deficiencies in recent times. The predictive model developed by various researchers were so designed that it can be used in an embedded system, keeping in mind the availability of computational resources. Nevertheless, the enormous popularity of smart phone technology has opened the door of opportunity to common farmers to have access to high computing resources. To facilitate smart phone users, this study proposes a framework of hosting high end systems in the cloud where processing can be done, and farmers can interact with the cloud-based system. With the availability of high computational power, many studies have been focused on applying convolutional Neural Networks-based Deep Learning (CNN-based DL) architectures, including Transfer learning (TL) models on agricultural research. Ensembling of various TL architectures has the potential to improve the performance of predictive models by a great extent. In this work, six TL architectures viz. InceptionV3, ResNet152V2, Xception, DenseNet201, InceptionResNetV2, and VGG19 are considered, and their various ensemble models are used to carry out the task of deficiency diagnosis in rice plants. Two publicly available datasets from Mendeley and Kaggle are used in this study. The ensemble-based architecture enhanced the highest classification accuracy to 100% from 99.17% in the Mendeley dataset, while for the Kaggle dataset; it was enhanced to 92% from 90%.

Why it matches plant phenotyping methods画像からイネの栄養欠乏状態を推定するアンサンブル深層学習法を開発・評価しており、植物状態の取得・分類が研究の中心である。

abstractthis study proposes a framework of hosting high end systems in the cloud where processing can be done, and farmers can interact with the cloud-based system.

Plant phenotyping with limited annotation: Doing more with less →

Abstract Deep learning (DL) methods have transformed the way we extract plant traits—both under laboratory as well as field conditions. Evidence suggests that “well‐trained” DL models can significantly simplify and accelerate trait extraction as well as expand the suite of extractable traits. Training a DL model typically requires the availability of copious amounts of annotated data; however, creating large‐scale annotated dataset requires nontrivial efforts, time, and resources. This limitation has become a major bottleneck in deploying DL tools in practice. Self‐supervised learning (SSL) methods give exciting solution to this problem, as these methods use unlabeled data to produce pretrained models for subsequent fine‐tuning on labeled data and have demonstrated superior transfer learning performance on down‐stream classification tasks. We investigated the application of SSL methods for plant stress classification using few labels. We select a plant stress classification problem to test the effectiveness of SSL, as it is a fundamentally challenging problem due to (a) disease classification which depends on the abnormalities in a small number of pixels, (b) high data imbalance across different classes, and (c) fewer annotated and available plant stress images than in other domains. We compared seven SSL approaches spanning four broad classes of SSL methods on soybean [ Glycine max L. (Merr.)] plant stress dataset and report that pretraining on unlabeled plant stress images significantly outperforms transfer learning methods using random initialization for plant stress classification. In summary, SSL‐based model initialization and data curation improves annotation efficiency for plant stress classification tasks and will circumvent data annotation challenges associated with DL methods.

Why it matches plant phenotyping methods植物ストレス画像から形質・状態を抽出する深層学習手法を比較検証し、自己教師あり学習によるアノテーション効率向上を評価しており、表現型抽出法が研究の中心である。

abstractDeep learning (DL) methods have transformed the way we extract plant traits—both under laboratory as well as field conditions.

Reduced ecosystem resilience quantifies fine-scale heterogeneity in tropical forest mortality responses to drought. →

Sensitivity of forest mortality to drought in carbon-dense tropical forests remains fraught with uncertainty, while extreme droughts are predicted to be more frequent and intense. Here, the potential of temporal autocorrelation of high-frequency variability in Landsat Enhanced Vegetation Index (EVI), an indicator of ecosystem resilience, to predict spatial and temporal variations of forest biomass mortality is evaluated against in situ census observations for 64 site-year combinations in Costa Rican tropical dry forests during the 2015 ENSO drought. Temporal autocorrelation, within the optimal moving window of 24 months, demonstrated robust predictive power for in situ mortality (leave-one-out cross-validation R 2 = 0.54), which allows for estimates of annual biomass mortality patterns at 30 m resolution. Subsequent spatial analysis showed substantial fine-scale heterogeneity of forest mortality patterns, largely driven by drought intensity and ecosystem properties related to plant water use such as forest deciduousness and topography. Highly deciduous forest patches demonstrated much lower mortality sensitivity to drought stress than less deciduous forest patches after elevation was controlled. Our results highlight the potential of high-resolution remote sensing to "fingerprint" forest mortality and the significant role of ecosystem heterogeneity in forest biomass resistance to drought.

Why it matches plant phenotyping methodsLandsat EVIの時間自己相関から森林バイオマス死亡率を推定し、現地センサスで検証する手法が研究の中心であるため、植物状態のリモートセンシング型フェノタイピングに該当する。

abstractthe potential of temporal autocorrelation of high-frequency variability in Landsat Enhanced Vegetation Index (EVI), an indicator of ecosystem resilience, to predict spatial and temporal variations of forest biomass mortality is evaluated against in situ census observations

HyperSeed: An End-to-End Method to Process Hyperspectral Images of Seeds. →

High-throughput, nondestructive, and precise measurement of seeds is critical for the evaluation of seed quality and the improvement of agricultural productions. To this end, we have developed a novel end-to-end platform named HyperSeed to provide hyperspectral information for seeds. As a test case, the hyperspectral images of rice seeds are obtained from a high-performance line-scan image spectrograph covering the spectral range from 600 to 1700 nm. The acquired images are processed via a graphical user interface (GUI)-based open-source software for background removal and seed segmentation. The output is generated in the form of a hyperspectral cube and curve for each seed. In our experiment, we presented the visual results of seed segmentation on different seed species. Moreover, we conducted a classification of seeds raised in heat stress and control environments using both traditional machine learning models and neural network models. The results show that the proposed 3D convolutional neural network (3D CNN) model has the highest accuracy, which is 97.5% in seed-based classification and 94.21% in pixel-based classification, compared to 80.0% in seed-based classification and 85.67% in seed-based classification from the support vector machine (SVM) model. Moreover, our pipeline enables systematic analysis of spectral curves and identification of wavelengths of biological interest.

Why it matches plant phenotyping methods種子のハイパースペクトル画像取得、セグメンテーション、スペクトル解析を一体化したプラットフォームとソフトウェアを開発しており、植物形質取得法が中心である。

abstractwe have developed a novel end-to-end platform named HyperSeed to provide hyperspectral information for seeds.

StomataScorer: a portable and high-throughput leaf stomata trait scorer combined with deep learning and an improved CV model. →

To measure stomatal traits automatically and nondestructively, a new method for detecting stomata and extracting stomatal traits was proposed. Two portable microscopes with different resolutions (TipScope with a 40× lens attached to a smartphone and ProScope HR2 with a 400× lens) are used to acquire images of living stomata in maize leaves. FPN model was used to detect stomata in the TipScope images and measure the stomata number and stomatal density. Faster RCNN model was used to detect opening and closing stomata in the ProScope HR2 images, and the number of opening and closing stomata was measured. An improved CV model was used to segment pores of opening stomata, and a total of 6 pore traits were measured. Compared to manual measurements, the square of the correlation coefficient (R 2 ) of the 6 pore traits was higher than 0.85, and the mean absolute percentage error (MAPE) of these traits was 0.02%-6.34%. The dynamic stomata changes between wild-type B73 and mutant Zmfab1a were explored under drought and re-watering condition. The results showed that Zmfab1a had a higher resilience than B73 on leaf stomata. In addition, the proposed method was tested to measure the leaf stomatal traits of other nine species. In conclusion, a portable and low-cost stomata phenotyping method that could accurately and dynamically measure the characteristic parameters of living stomata was developed. An open-access and user-friendly web portal was also developed which has the potential to be used in the stomata phenotyping of large populations in the future.

Why it matches plant phenotyping methods生きた葉の気孔形質を画像取得・深層学習・セグメンテーションで自動抽出する手法を開発し、手動測定との比較検証とWebポータル提供まで行っており、植物フェノタイピング手法が中心である。

abstracta new method for detecting stomata and extracting stomatal traits was proposed.

Assessing Drought and Heat Stress-Induced Changes in the Cotton Leaf Metabolome and Their Relationship With Hyperspectral Reflectance. →

The study of phenotypes that reveal mechanisms of adaptation to drought and heat stress is crucial for the development of climate resilient crops in the face of climate uncertainty. The leaf metabolome effectively summarizes stress-driven perturbations of the plant physiological status and represents an intermediate phenotype that bridges the plant genome and phenome. The objective of this study was to analyze the effect of water deficit and heat stress on the leaf metabolome of 22 genetically diverse accessions of upland cotton grown in the Arizona low desert over two consecutive years. Results revealed that membrane lipid remodeling was the main leaf mechanism of adaptation to drought. The magnitude of metabolic adaptations to drought, which had an impact on fiber traits, was found to be quantitatively and qualitatively associated with different stress severity levels during the two years of the field trial. Leaf-level hyperspectral reflectance data were also used to predict the leaf metabolite profiles of the cotton accessions. Multivariate statistical models using hyperspectral data accurately estimated ( R 2 > 0.7 in ∼34% of the metabolites) and predicted ( Q 2 > 0.5 in 15-25% of the metabolites) many leaf metabolites. Predicted values of metabolites could efficiently discriminate stressed and non-stressed samples and reveal which regions of the reflectance spectrum were the most informative for predictions. Combined together, these findings suggest that hyperspectral sensors can be used for the rapid, non-destructive estimation of leaf metabolites, which can summarize the plant physiological status.

Why it matches plant phenotyping methods葉のハイパースペクトル反射から代謝物プロファイルを非破壊推定する手法を統計モデルで評価しており、植物の生理状態の推定が中心的な方法的貢献として記述されている。

abstractLeaf-level hyperspectral reflectance data were also used to predict the leaf metabolite profiles of the cotton accessions.

Applying HPLC to Screening QTLs for BLB Resistance in Rice. →

Bacterial leaf blight (BLB) is caused by Xanthomonas oryzae pv. oryzae and is a major cause of rice yield reductions around the world. When diseased, plants produce a variety of metabolites to resist pathogens. In this study, the various defense metabolites were quantified using high-performance liquid chromatography (HPLC) after Xoo inoculation in a 120 Cheongcheong/Nagdong double haploid (CNDH) population. Quantitative trait locus (QTL) mapping was conducted using the concentration of the plant defense metabolites. HPLC analyzes the concentration of substances according to the severity of disease symptoms. Searching for BLB resistance candidate genes by applying this analysis method is very effective when mapping related genes. These resistance genes can be mapped directly to the causative pathogens. A total of 17 metabolites were detected by means of HPLC analysis after Xoo inoculation in the 120 CNDH population. QTL mapping of the metabolite concentrations resulted in the detection of the BLB resistance candidate gene, OsWRKYq6, in RM3343 of chromosome 6. OsWRKYq6 has a very high homology sequence with WRKY transcription factor 39, and when inoculated with Xoo, the relative expression level of the resistant population was higher than that of the susceptible population. Resistance genes have previously been detected using only phenotypic change data. In this study, resistance candidate genes were detected using the concentration of metabolites produced in plants after inoculation with pathogens. This newly developed analysis method can be used to effectively detect and identify genes directly involved in disease resistance for future studies.

Why it matches plant phenotyping methodsHPLCによる防御代謝物濃度の定量を、イネの病害抵抗性状態の表現型取得・QTL検出法として明示的に開発・適用しており、単なるルーチン測定ではない。

abstractIn this study, the various defense metabolites were quantified using high-performance liquid chromatography (HPLC) after Xoo inoculation in a 120 Cheongcheong/Nagdong double haploid (CNDH) population.

Detection of the metabolic response to drought stress using hyperspectral reflectance. →

Drought is the most important limitation on crop yield. Understanding and detecting drought stress in crops is vital for improving water use efficiency through effective breeding and management. Leaf reflectance spectroscopy offers a rapid, non-destructive alternative to traditional techniques for measuring plant traits involved in a drought response. We measured drought stress in six glasshouse-grown agronomic species using physiological, biochemical, and spectral data. In contrast to physiological traits, leaf metabolite concentrations revealed drought stress before it was visible to the naked eye. We used full-spectrum leaf reflectance data to predict metabolite concentrations using partial least-squares regression, with validation R2 values of 0.49-0.87. We show for the first time that spectroscopy may be used for the quantitative estimation of proline and abscisic acid, demonstrating the first use of hyperspectral data to detect a phytohormone. We used linear discriminant analysis and partial least squares discriminant analysis to differentiate between watered plants and those subjected to drought based on measured traits (accuracy: 71%) and raw spectral data (66%). Finally, we validated our glasshouse-developed models in an independent field trial. We demonstrate that spectroscopy can detect drought stress via underlying biochemical changes, before visual differences occur, representing a powerful advance for measuring limitations on yield.

Why it matches plant phenotyping methods葉のハイパースペクトル反射から植物の干ばつストレスおよび関連形質を推定する手法を開発・検証しており、独立圃場試験での検証も含むため、表現型取得法が中心である。

abstractLeaf reflectance spectroscopy offers a rapid, non-destructive alternative to traditional techniques for measuring plant traits involved in a drought response.

Improvement of Phosphorus Use Efficiency in Rice by Adopting Image-Based Phenotyping and Tolerant Indices. →

Phosphorus is one of the second most important nutrients for plant growth and development, and its importance has been realised from its role in various chains of reactions leading to better crop dynamics accompanied by optimum yield. However, the injudicious use of phosphorus (P) and non-renewability across the globe severely limit the agricultural production of crops, such as rice. The development of P-efficient cultivar can be achieved by screening genotypes either by destructive or non-destructive approaches. Exploring image-based phenotyping (shoot and root) and tolerant indices in conjunction under low P conditions was the first report, the epicentre of this study. Eighteen genotypes were selected for hydroponic study from the soil-based screening of 68 genotypes to identify the traits through non-destructive (geometric traits by imaging) and destructive (morphology and physiology) techniques. Geometric traits such as minimum enclosing circle, convex hull, and calliper length show promising responses, in addition to morphological and physiological traits. In 28-day-old seedlings, leaves positioned from third to fifth played a crucial role in P mobilisation to different plant parts and maintained plant architecture under P deficient conditions. Besides, a reduction in leaf angle adjustment due to a decline in leaf biomass was observed. Concomitantly, these geometric traits facilitate the evaluation of low P-tolerant rice cultivars at an earlier stage, accompanying several stress indices. Out of which, Mean Productivity Index, Mean Relative Performance, and Relative Efficiency index utilising image-based traits displayed better responses in identifying tolerant genotypes under low P conditions. This study signifies the importance of image-based phenotyping techniques to identify potential donors and improve P use efficiency in modern rice breeding programs.

Why it matches plant phenotyping methods低リン耐性イネの選抜において、画像から幾何学的形質を抽出するイメージベース表現型解析を中心的に適用・評価しており、単なる生物学的実験のルーチン測定ではない。

abstractExploring image-based phenotyping (shoot and root) and tolerant indices in conjunction under low P conditions was the first report, the epicentre of this study.

A mathematical framework for analyzing wild tomato root architecture →

The root architecture of wild tomato, Solanum pimpinellifolium , can be viewed as a network connecting the main root to various lateral roots. Several constraints have been proposed on the structure of such biological networks, including minimizing the total amount of wire necessary for constructing the root architecture (wiring cost), and minimizing the distances (and by extension, resource transport time) between the base of the main root and the lateral roots (conduction delay). For a given set of lateral root tip locations, these two objectives compete with each other — optimizing one results in poorer performance on the other — raising the question how well S. pimpinellifolium root architectures balance this network design trade-off in a distributed manner. Here, we describe how well S. pimpinellifolium roots resolve this trade-off using the theory of Pareto optimality. We describe a mathematical model for characterizing the network structure and design trade-offs governing the structure of S. pimpinellifolium root architecture. We demonstrate that S. pimpinellifolium arbors construct architectures that are more optimal than would be expected by chance. Finally, we use this framework to quantify structural differences between arbors grown in the presence of salt stress, classify arbors into four distinct architectural ideotypes, and test for heritability of variation in root architecture structure.

Why it matches plant phenotyping methods根系アーキテクチャをネットワークとして定量化・分類する数学的解析フレームワークが研究の中心であり、植物表現型の構造差とイデオタイプを抽出しているため。

abstractWe describe a mathematical model for characterizing the network structure and design trade-offs governing the structure of S. pimpinellifolium root architecture.

Robotic Assay for Drought (RoAD): an automated phenotyping system for brassinosteroid and drought responses →

Brassinosteroids (BRs) are a group of plant steroid hormones involved in regulating growth, development, and stress responses. Many components of the BR pathway have previously been identified and characterized. However, BR phenotyping experiments are typically performed in a low-throughput manner, such as on Petri plates. Additionally, the BR pathway affects drought responses, but drought experiments are time consuming and difficult to control. To mitigate these issues and increase throughput, we developed the Robotic Assay for Drought (RoAD) system to perform BR and drought response experiments in soil-grown Arabidopsis plants. RoAD is equipped with a robotic arm, a rover, a bench scale, a precisely controlled watering system, an RGB camera, and a laser profilometer. It performs daily weighing, watering, and imaging tasks and is capable of administering BR response assays by watering plants with Propiconazole (PCZ), a BR biosynthesis inhibitor. We developed image processing algorithms for both plant segmentation and phenotypic trait extraction to accurately measure traits including plant area, plant volume, leaf length, and leaf width. We then applied machine learning algorithms that utilize the extracted phenotypic parameters to identify image-derived traits that can distinguish control, drought-treated, and PCZ-treated plants. We carried out PCZ and drought experiments on a set of BR mutants and Arabidopsis accessions with altered BR responses. Finally, we extended the RoAD assays to perform BR response assays using PCZ in Zea mays (maize) plants. This study establishes an automated and non-invasive robotic imaging system as a tool to accurately measure morphological and growth-related traits of Arabidopsis and maize plants in 3D, providing insights into the BR-mediated control of plant growth and stress responses.

Why it matches plant phenotyping methodsRoADはロボット、RGBカメラ、レーザープロフィロメータ、画像処理による植物形質抽出を中核とする自動フェノタイピングシステムであり、方法開発と実証が主目的です。

abstractwe developed the Robotic Assay for Drought (RoAD) system

A global non-invasive methodology for the phenotyping of potato under water deficit conditions using imaging, physiological and molecular tools →

Abstract Background Drought is a major consequence of global heating that has negative impacts on agriculture. Potato is a drought-sensitive crop; tuber growth and dry matter content may both be impacted. Moreover, water deficit can induce physiological disorders such as glassy tubers and internal rust spots. The response of potato plants to drought is complex and can be affected by cultivar type, climatic and soil conditions, and the point at which water stress occurs during growth. The characterization of adaptive responses in plants presents a major phenotyping challenge. There is therefore a demand for the development of non-invasive analytical techniques to improve phenotyping. Results This project aimed to take advantage of innovative approaches in MRI, phenotyping and molecular biology to evaluate the effects of water stress on potato plants during growth. Plants were cultivated in pots under different water conditions. A control group of plants were cultivated under optimal water uptake conditions. Other groups were cultivated under mild and severe water deficiency conditions (40 and 20% of field capacity, respectively) applied at different tuber growth phases (initiation, filling). Water stress was evaluated by monitoring soil water potential. Two fully-equipped imaging cabinets were set up to characterize plant morphology using high definition color cameras (top and side views) and to measure plant stress using RGB cameras. The response of potato plants to water stress depended on the intensity and duration of the stress. Three-dimensional morphological images of the underground organs of potato plants in pots were recorded using a 1.5 T MRI scanner. A significant difference in growth kinetics was observed at the early growth stages between the control and stressed plants. Quantitative PCR analysis was carried out at molecular level on the expression patterns of selected drought-responsive genes. Variations in stress levels were seen to modulate ABA and drought-responsive ABA-dependent and ABA-independent genes. Conclusions This methodology, when applied to the phenotyping of potato under water deficit conditions, provides a quantitative analysis of leaves and tubers properties at microstructural and molecular levels. The approaches thus developed could therefore be effective in the multi-scale characterization of plant response to water stress, from organ development to gene expression.

Why it matches plant phenotyping methodsジャガイモの水ストレス表現型を取得するための非侵襲的イメージング・生理計測手法と装置構成が研究の中心であり、単なる生物学的測定ではない。

abstractThere is therefore a demand for the development of non-invasive analytical techniques to improve phenotyping.

Heterophylly Quantitative Trait Loci Respond to Salt Stress in the Desert Tree Populus euphratica . →

Heterophylly, or leaf morphological changes along plant shoot axes, is an important indicator of plant eco-adaptation to heterogeneous microenvironments. Despite extensive studies on the genetic control of leaf shape, the genetic architecture of heterophylly remains elusive. To identify genes related to heterophylly and their associations with plant saline tolerance, we conducted a leaf shape mapping experiment using leaves from a natural population of Populus euphratica . We included 106 genotypes grown under salt stress and salt-free (control) conditions using clonal seedling replicates. We developed a shape tracking method to monitor and analyze the leaf shape using principal component (PC) analysis. PC1 explained 42.18% of the shape variation, indicating that shape variation is mainly determined by the leaf length. Using leaf length along shoot axes as a dynamic trait, we implemented a functional mapping-assisted genome-wide association study (GWAS) for heterophylly. We identified 171 and 134 significant quantitative trait loci (QTLs) in control and stressed plants, respectively, which were annotated as candidate genes for stress resistance, auxin, shape, and disease resistance. Functions of the stress resistance genes ABSCISIC ACIS-INSENSITIVE 5-like ( ABI5 ), WRKY72 , and MAPK3 were found to be related to many tolerance responses. The detection of AUXIN RESPONSE FACTOR17-LIKE ( ARF17 ) suggests a balance between auxin-regulated leaf growth and stress resistance within the genome, which led to the development of heterophylly via evolution. Differentially expressed genes between control and stressed plants included several factors with similar functions affecting stress-mediated heterophylly, such as the stress-related genes ABC transporter C family member 2 ( ABCC2 ) and ABC transporter F family member ( ABCF ), and the stomata-regulating and reactive oxygen species (ROS) signaling gene RESPIRATORY BURST OXIDASE HOMOLOG ( RBOH ). A comparison of the genetic architecture of control and salt-stressed plants revealed a potential link between heterophylly and saline tolerance in P. euphratica , which will provide new avenues for research on saline resistance-related genetic mechanisms.

Why it matches plant phenotyping methods葉形を追跡・解析する方法を開発し、葉形状を動的な表現型として定量化しているため、植物フェノタイピング手法が研究の中心です。

abstractWe developed a shape tracking method to monitor and analyze the leaf shape using principal component (PC) analysis.

Functional physiological phenotyping with functional mapping: A general framework to bridge the phenotype-genotype gap in plant physiology. →

The recent years have witnessed the emergence of high-throughput phenotyping techniques. In particular, these techniques can characterize a comprehensive landscape of physiological traits of plants responding to dynamic changes in the environment. These innovations, along with the next-generation genomic technologies, have brought plant science into the big-data era. However, a general framework that links multifaceted physiological traits to DNA variants is still lacking. Here, we developed a general framework that integrates functional physiological phenotyping (FPP) with functional mapping (FM). This integration, implemented with high-dimensional statistical reasoning, can aid in our understanding of how genotype is translated toward phenotype. As a demonstration of method, we implemented the transpiration and soil-plant-atmosphere measurements of a tomato introgression line population into the FPP-FM framework, facilitating the identification of quantitative trait loci (QTLs) that mediate the spatiotemporal change of transpiration rate and the test of how these QTLs control, through their interaction networks, phenotypic plasticity under drought stress.

Why it matches plant phenotyping methods植物の生理形質を取得・解析するFPP-FM統合フレームワークを開発し、トマト集団の蒸散測定で実証しており、表現型取得と解析手法が中心である。

abstractHere, we developed a general framework that integrates functional physiological phenotyping (FPP) with functional mapping (FM).

High‐throughput field phenotyping reveals genetic variation in photosynthetic traits in durum wheat under drought →

Abstract Chlorophyll fluorescence (ChlF) is a powerful non‐invasive technique for probing photosynthesis. Although proposed as a method for drought tolerance screening, ChlF has not yet been fully adopted in physiological breeding, mainly due to limitations in high‐throughput field phenotyping capabilities. The light‐induced fluorescence transient (LIFT) sensor has recently been shown to reliably provide active ChlF data for rapid and remote characterisation of plant photosynthetic performance. We used the LIFT sensor to quantify photosynthesis traits across time in a large panel of durum wheat genotypes subjected to a progressive drought in replicated field trials over two growing seasons. The photosynthetic performance was measured at the canopy level by means of the operating efficiency of Photosystem II ( ) and the kinetics of electron transport measured by reoxidation rates ( and ). Short‐ and long‐term changes in ChlF traits were found in response to soil water availability and due to interactions with weather fluctuations. In mild drought, and were little affected, while was consistently accelerated in water‐limited compared to well‐watered plants, increasingly so with rising vapour pressure deficit. This high‐throughput approach allowed assessment of the native genetic diversity in ChlF traits while considering the diurnal dynamics of photosynthesis.