Phenotyping high-biomass perennial crops is laborious and the rate of genetic gain in conventional perennial crop breeding programs is typically low. So, it is especially important to identify methods that produce efficiency gains in the breeding process. Miscanthus is a C4 perennial grass with favorable characteristics for producing biomass as a feedstock for biofuels and diverse bio-based products. Increasing biomass yield will increase profitability and environmental benefits, so it is a key target for Miscanthus breeding. In addition, the identification of well-adapted genotypes across a wide range of environmental conditions requires the establishment of multi-environment trials (METs). Sparse testing is a genomic prediction-based strategy that reduces the phenotyping costs in METs by selecting a subset of genotypes to evaluate in a subset of environments and then predicts the performance of the unobserved genotype-environment combinations. A Miscanthus sacchariflorus (MSA) population comprising 336 genotypes observed across three environments was analyzed implementing sparse testing designs. Three prediction models considering main effects (environments, genotypes, genomic) and interaction effects (genotype-by-environment; G×E interaction) were implemented for forecasting dry biomass yield (YDY), total culm (TCM), average internode length (AIL), and culm node number (CNN). Multiple calibration sets based on different compositions and sizes were considered to evaluate performance in terms of the predictive ability (PA) and the mean square error (MSE) for a fixed testing set size. The training set size ranged from 52 to 112 to predict a fixed set of 224 unobserved genotypes across all three environments. The results showed that the model accounting for G×E interaction consistently presented the highest PA and the lowest MSE: for CNN (PA: ~0.77, MSE: ~0.5) and YDY (PA: ~0.70, MSE: ~1.3) while for TCM and AIL these ranged from ~0.28 to 0.41 and ~1.3 to 4.3, respectively. Overall, varying training sets and allocation strategies did not affect PA and MSE, with 52 non-overlapping and 0 overlapping genotypes per environment as the optimal cost-effective allocation framework. This suggests that implementing sparse testing designs could significantly reduce phenotyping costs by fivefold, without compromising PA in breeding programs for perennial crops such as Miscanthus .
Why it matches plant phenotyping methodsスパーステスト設計とゲノム予測を用いて、複数環境での植物形質予測と表現型測定コスト削減を評価しており、表現型取得・予測手法が研究の中心である。
abstractSparse testing is a genomic prediction-based strategy that reduces the phenotyping costs in METs by selecting a subset of genotypes to evaluate in a subset of environments and then predicts the performance of the unobserved genotype-environment combinations.
Reproduction assets foundThe paper's data availability statement points to a public figshare deposit (DOI 10.6084/m9.figshare.31796794) containing the datasets analyzed in this Miscanthus sparse-testing genomic prediction study, including the phenotypic and genotypic data used for the models.Dataset · publicThe datasets analyzed for this study can be found in the figshare repository at https://doi.org/10.6084/m9.figshare.31796794 .Open asset ↗figshare · 10.6084/m9.figshare.31796794lines:603-621Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Shoot apical meristem (SAM) homeostasis integrates environmental and genetic cues to regulate growth dynamics that drive biomass accumulation and crop yield; however, no robust, non-destructive, quantitative proxy has been established for modeling or monitoring SAM-homeostasis-associated dynamics. Here, we developed a novel robot-based 3D imaging system and a custom pot-chamber gas exchange system to non-destructively measure plant occupation volume (POV) and whole-plant photosynthetic rate in wild-type Arabidopsis plants and nine mutants with disrupted SAM homeostasis. We demonstrate that POV robustly captures 3D plant architecture, whereas whole-plant photosynthetic rate serves as a superior proxy for optimal growth dynamics and final biomass associated with SAM homeostasis, outperforming conventional traits such as leaf number, leaf size, total leaf area, and rosette diameter. The strong positive correlations among POV, whole plant photosynthesis, and biomass accumulation establish a powerful new framework for quantitative studies of SAM homeostasis and data-driven evaluation of plant architecture.
Why it matches plant phenotyping methodsロボット3D画像とカスタムガス交換による非破壊的な植物形態・光合成表現型測定系を開発し、従来形質との比較検証も行っており、方法が研究の中心である。
abstractwe developed a novel robot-based 3D imaging system and a custom pot-chamber gas exchange system to non-destructively measure plant occupation volume (POV) and whole-plant photosynthetic rate
Reproduction assets foundThe paper's authors explicitly state that the Python source code for whole-plant leaf-area segmentation, 3D point cloud processing, POV calculation, and Mask3D-based segmentation is publicly available on GitHub at https://github.com/songqingfeng/AtPOVcalculator. This is a paper-specific, public, actionable analysis/PhDCode · publicThe Python source code for whole-plant leaf-area segmentation and calculation is publicly available on GitHub ( https://github.com/songqingfeng/AtPOVcalculator ).Open asset ↗songqingfeng/AtPOVcalculatorlines:224-233Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Plants encounter multiple abiotic stresses. Among them, heat and drought stress play a substantial role in reducing the agricultural productivity of commercial plants. Hence, wild and underutilized plants can be a potential alternative as they are naturally tolerant to extreme climatic conditions and are a rich source of nutrition. Manual stress and disease detection is a laborious and expensive process, and hence automation in this field is required to reduce agricultural losses. This study evaluates the prediction and detection of abiotic stress in Acacia senegal bipinnate leaves, exploring various stress-induced changes using machine learning (ML) algorithms and biochemical analysis. A. senegal , an underutilized edible desert legume, was grown under controlled greenhouse conditions. After 2 months, these plants were segregated into groups and subjected to heat and drought treatments. Image acquisition was performed to obtain a dataset of 3,454 images of A. senegal leaves. Physiological parameters, such as fresh and dry leaf weight, shoot length, number of leaves, and biochemical assays like antioxidant assay (DPPH), total phenolic content (TPC), and total flavonoid content (TFC), were determined. LC-MS/MS analysis was conducted to identify over 50 phytochemical compounds. A hybrid model was developed consisting of a fine-tuned EfficientNet-based Convolutional Neural Network (CNN) followed by a Support Vector Machine (SVM) for the binary classification of A. senegal leaves. The model distinguishes between healthy and stress-affected unhealthy leaves and achieved an accuracy score of 86.6%. This report provides a significant lead toward stress phenotyping and prediction of a bipinnate leaf plant using ML algorithms. The overall study is useful to understand how the stress encountered by arid plants alters the nutritional quality.
Why it matches plant phenotyping methods画像データと機械学習モデルを用いて、アカシア葉の健全・ストレス状態を自動分類する手法を開発・評価しており、植物表現型取得が中心です。
abstractThis study evaluates the prediction and detection of abiotic stress in Acacia senegal bipinnate leaves
Reproduction assets foundThe paper's data availability statement explicitly makes the 3,454-image A. senegal leaf imaging dataset public on Zenodo and the ML implementation source code public on GitHub; both are paper-specific, public, and actionable.Dataset · publicThe plant leaf imaging data used in the work is publicly available at https://doi.org/10.5281/zenodo.16531486.Open asset ↗zenodo · 10.5281/zenodo.16531486html-lines:480-497Code · publicThe source code of the implementation is available at https://github.com/softwareinnovationslabBITS/CDRF_ASenegal_MLImagingOpen asset ↗github · softwareinnovationslabBITS/CDRF_ASenegal_MLImaginghtml-lines:480-497Code / dataset availability confirmedEurope PMC · bioRxiv · checked 6 Sept 2026
0. Morphological traits such as floral area and body size are fundamental to ecological research, serving as inputs for studies of pollinator–plant interactions, habitat quality, and biodiversity monitoring. However, accurately measuring these traits from images remains challenging, particularly in complex field conditions where existing tools exhibit reduced accuracy and limited generalizability across taxa. We present EcoMorph, a modular morphological measurement system that leverages the Segment Anything Model 3 (SAM3) to quantify traits across diverse ecological contexts. Unlike task-specific segmentation models requiring domain-specific training data, SAM3’s prompt-based architecture enables segmentation of arbitrary biological structures from natural-language prompts, using the same underlying model across flowers, insects, and other targets without retraining. From the resulting segmentations, EcoMorph extracts three classes of measurement: area, linear dimensions, and object counts. We validated EcoMorph across two ecological scales. At the intermediate scale, EcoMorph-derived floral area agreed closely with manual ImageJ measurements (R 2 = 0.935, n = 74) under simple-background conditions and (R 2 = 0.928, n = 58) under complex-background conditions, with valid predictions for 95% of images. At the fine scale, EcoMorph-derived insect body area was strongly correlated with hand-measured intertegular distance (r = 0.810, n = 349), capturing body-size variation across species from the small Bombus impatiens to the large Xylocopa virginica . Object counts matched manual counts almost exactly for well-separated insects in an insect box (R 2 = 0.9997, n = 12). By combining prompt-based segmentation with modular measurement, EcoMorph enables high-throughput quantification of area, size, and abundance from heterogeneous image sources without taxon-specific training. This generality supports a broad range of ecological applications, including pollinator and plant trait research, biodiversity and abundance monitoring, and allometric biomass estimation.
Why it matches plant phenotyping methods画像から花の面積など植物形態形質を抽出する汎用システムを開発し、手動測定との一致で検証しており、植物フェノタイピング手法が中心である。
abstractWe present EcoMorph, a modular morphological measurement system that leverages the Segment Anything Model 3 (SAM3) to quantify traits across diverse ecological contexts.
Reproduction assets foundThe paper's Data and code availability statement provides a public Zenodo deposit containing the validation datasets and code used for the EcoMorph phenotyping measurements (floral area, insect morphometrics, counts), plus a public web deployment of the EcoMorph software itself.Code · publicValidation datasets and code are available here on Zenodo
https://zenodo.org/records/20980236.Open asset ↗Zenodo · 20980236pdf-page:2 lines:1-54Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Abstract Mangroves play a critical role in coastal ecosystem services, particularly through their capacity to sequester large amounts of atmospheric carbon, contributing to climate change mitigation. Developing accurate mangrove carbon models is therefore essential for monitoring ecosystem condition and carbon stocks at relevant scales. This study aimed to estimate mangrove Above-Ground Carbon (AGC) in Baluran National Park by integrating field measurements and remote sensing data within a Machine Learning (ML) framework. The study utilised an extensive field data collection programme of 60 sampling plots of girth at breast height, canopy cover, tree height, and tree density. Mangrove AGC was estimated using allometric equations. AGC was also modelled by processing satellite images, conducting statistical analyses, developing models with five ML algorithms (Random Forest (RF), Support Vector Machine (SVM), Decision Tree (DT), k-Nearest Neighbour (k-NN), and Gradient Boost (GB)), and checking accuracy using 5-fold cross-validation (CV) of Root Mean Square Error (RMSE). The RF model, using field-measured tree height, Ratio Vegetation Index (RVI), and Transformed Soil-Adjusted Vegetation Index (TSAVI), achieved the best performance ( R² training = 0.93, R² testing = 0.84, 5-fold CV RMSE = 12.20 Mg C ha⁻¹). Predicted AGC ranged from 5.39 to 57.18 Mg C ha⁻¹ (mean ± Standard Deviation (SD) = 30.43 ± 16.09 Mg C ha⁻¹) and showed improved accuracy compared to the global mangrove biomass dataset of (Simard et al., 2019). A key contribution of this study is the integration of field-measured tree height within a satellite-based ML framework, which enhances the accuracy and ecological relevance of AGC estimation compared to approaches relying solely on spectral predictors or remotely sensed canopy height products, offering a practical and cost-effective alternative for sites where UAV or LiDAR data are unavailable. This approach provides a practical method for regional mangrove carbon monitoring, national carbon accounting and supports climate change mitigation efforts.
Why it matches plant phenotyping methodsマングローブの樹高・樹冠情報と衛星データを統合し、機械学習で個体・プロットレベルの地上部炭素量という植物状態を推定する手法を開発・交差検証しており、単なる生態系測定ではなく表現型取得手法が中心である。
abstractAGC was also modelled by processing satellite images, conducting statistical analyses, developing models with five ML algorithms (Random Forest (RF), Support Vector Machine (SVM), Decision Tree (DT), k-Nearest Neighbour (k-NN), and Gradient Boost (GB)), and checking accuracy using 5-fold cross-validation (CV) of Root Mean Square Error (RMSE).
Reproduction assets foundThe authors state that all analysis code (model development, hyperparameter configuration, diagnostics, accuracy assessment) is publicly available in their GitHub repository Mangroves-AGC-Baluran, which reproduces this paper's mangrove AGC machine-learning analysis.Code · publicThe Python codes were available on
h
t
t
p
s
:
/
/
g
i
t
h
u
b
.
c
o
m
/
s
e
f
t
i
a
w
a
n
-
s
r
/
Mangroves-AGC-Baluran.git.Open asset ↗Mangroves-AGC-Baluran.git · Mangroves-AGC-Baluran.gitpdf-raw-page:17 lines:1-379Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
Plant phenotyping based on unmanned aerial vehicles still faces challenges regarding the direct correlation between spectral information with field-collected variables, due to the influence of environmental factors and the considerable variation among maize phenological stages. Therefore, the objectives of this research were: I) to evaluate the interaction of nitrogen doses and evaluation environments (phenological stages and growing seasons) and variance components for field variables and vegetation indices; II) to identify the most suitable indices according to the evaluation environments; and III) to predict field variables based on relevant vegetation indices identified through the proposed methodology. The study was conducted using a randomized complete block design with four repetitions, in which treatments consisted of six nitrogen (N) topdressing doses (0, 50, 100, 200, 300, and 400 kg ha−1) during the 2022/2023 and 2023/2024 growing seasons. Evaluations of agronomic variables and image acquisition were performed in five distinct phenological stages throughout the maize crop cycle. The data were analyzed using deviance analysis and variance components, principal component analysis (PCA), and multivariate linear modeling for the prediction of field variables. Our results demonstrated that all indices were affected by the interaction between N doses and evaluation environments (phenological stages and growing seasons). Additionally, the most reliable were EXGRaw, TGI, GNDVI, NDRE, CIRE, GVI, CVI, BNDVI, PanNDVI, SRNIRRe, SFDVI, RGBindex, NDVI, SAVI, MSAVI, and OSAVI, which showed clustering patterns according to growing season condition and phenological stage. Finally, the variables predicted using the proposed methodology achieved coefficients of determination above 0.80, except for shoot biomass and 100-grain weight. Therefore, it can be concluded that vegetation indices are influenced by the evaluated environment; however, the proposed framework based on the deduction of fixed and random effects enables the prediction of field variables with high accuracy using relatively simple models.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像から植生指数を選定し、農業形質を予測する方法論の開発・評価が研究の中心であり、植物形質の取得・推定に直接関与している。
titleMethodology for Selecting Stable UAV-Based Vegetation Indices for Prediction of Agronomic Variables in Maize Using a Multispectral Sensor.
Reproduction assets foundThe paper's supplementary file contains the REML-BLUP adjusted values for all vegetation indices and field variables, which directly reproduce the paper's phenotyping measurements and underpin its computational analysis. The raw UAV imagery and field data are only available on request, and the EstimateBreed R package (Dataset · publicdual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Supplementary Materials
The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/plants15121782/s1 , Table_Supplementary_1. This table contains all vegetation indices and field variables with values adjusted using the RELM-BLUP methodology.
Author Contributions
C.d.S.L.: Conceptualization, methodology, validation, visualization, writing—original draft, writing—review and editing. A.J.T.S.: Data collection and iOpen asset ↗lines:76-146Code / dataset availability confirmedOpenAlex · Europe PMC · bioRxiv · Crossref · checked 15 Sept 2026
BarleyCommon beanCowpeaGrowth chamberMesh / voxelLiDAR / point cloudMultispectral / hyperspectralLeafWhole plant / canopy / plot / fieldAnnotation / quality control
Abstract High-throughput 3D multispectral plant phenotyping platforms generate large volumes of point cloud files, but trait extraction is typically performed by sensor-bundled software whose internal algorithms are not publicly documented, which limits reproducibility and integration into custom research pipelines. Here we present PhytoScan3D, an open-source Python pipeline that extracts morphological and spectral phenotypic traits, spanning plant height, 3D leaf area, digital biomass, convex hull volume, leaf inclination, canopy geometry, NDVI, hue, and vegetation indices, from both PLY and PCD point cloud files generated by Phenospex PlantEye F500 and F600 sensors, and is portable to point clouds from any acquisition platform. PhytoScan3D was validated against HortControl (PhenoSpex) ground-truth measurements on 936 barley ( Hordeum vulgare ) pot-date observations from the growth chamber trial (20 Norwegian cultivars, 12 scan dates, Septemenr 2025 to January 2026), achieving Pearson r = 0.913 to 0.999 and ratio approximately 1.000 for Plant Height Max, 3D Leaf Area, and NDVI Average. A vectorised mesh face filtering implementation achieved a 120x speed improvement, increasing valid 3D Leaf Area coverage from 0.6% to 100% of files. Cross-format validation on 223 PlantEye F600 PCD files from the ICRISAT LeasyScan platform (four legume species: mungbean, cowpea, lima bean, and common bean; 1,523 plant observations) yielded r = 0.884 against independent cuboid annotation heights. The systematic positive bias (mean +27.2 mm, ratio = 1.44) is attributable to PhytoScan3D computing height from raw point cloud Z-range while cuboid annotations are fitted to segmented plant points only, with the offset consistent across all four species (per-species r = 0.880 to 0.888). Cross-dataset processing of 1,180 PLY files from the Crops3D benchmark (8 species, 3 acquisition methods) confirmed zero extraction errors. PhytoScan3D is available at “github.com/kovimallik/phytoscan3d” under the MIT licence and processes 1,651 files across three independent datasets in under 12 minutes on GPU hardware. Highlights PhytoScan3D is the first open-source Python pipeline for batch extraction of phenotypic traits, including plant height, 3D leaf area, digital biomass, convex hull volume, leaf inclination, NDVI, and excess green index, from both PLY and PCD point cloud files generated by Phenospex PlantEye sensors. Primary validation against HortControl ground-truth measurements on 936 barley pot-date observations achieved Pearson r = 0.913-0.999 for Plant Height Max, 3D Leaf Area, and NDVI Average. A 120x computational speedup in mesh face filtering (vectorised NumPy vs. set-based loop) increased the coverage of valid 3D Leaf Area extraction from 0.6% to 100% of files. Cross-format validation on 223 PlantEye F600 PCD files from ICRISAT LeasyScan (four legume species, 1,523 plants) achieved r = 0.884 against independent cuboid annotation heights. The systematic +27.2 mm bias reflects a methodological difference (raw Z-range vs. soil-segmented annotations), is consistent and predictable across all four species (per-species r = 0.880-0.888), and is correctable by a single linear factor. Cross-dataset processing of 1,180 PLY files from the Crops3D benchmark (8 species, 3 acquisition methods) confirmed zero extraction errors. Significant scan-unit variation was detected for Plant Height Max (F = 5.71, p < 0.001, η 2 = 0.138) and Canopy Width X (F = 6.32, p < 0.001, η 2 = 0.150), demonstrating the biological utility of extracted traits.
Why it matches plant phenotyping methods植物の3D点群・マルチスペクトルデータから形態・スペクトル形質を抽出するオープンソース手法を開発し、複数データセットで技術検証・ベンチマークしているため、植物フェノタイピング手法が中心である。
abstractHere we present PhytoScan3D, an open-source Python pipeline that extracts morphological and spectral phenotypic traits
Reproduction assets foundThe paper's own analysis code (PhytoScan3D pipeline) is publicly released on GitHub under the MIT licence, and the two external 3D point cloud datasets used for validation (Crops3D and ICRISAT LeasyScan) are publicly available on figshare. The primary barley PLY dataset is not yet public (to be deposited in NVA upon).Code · publicditing, Funding acquisition.
Declaration of Competing Interest
The authors declare that they have no known competing financial interests or personal
relationships that could have appeared to influence the work reported in this paper.
Data Availability
PhytoScan3D source code, documentation, and example datasets are available at
https://github.com/kovimallik/phytoscan3d under the MIT licence. The barley PLY dataset
will be deposited in the Norwegian Research Information Repository (NVA) upon acceptance.
The Crops3D benchmark dataset is publicly available at
https://doi.org/10.6084/m9.figshare.27313272 (Zhu et al. 2024). The ICRISAT LeasyScan
dataset is publicly available at https://doi.org/10Open asset ↗github.com/kovimallik/phytoscan3dpdf-raw-page:15 lines:1-36Dataset · publicData Availability
PhytoScan3D source code, documentation, and example datasets are available at
https://github.com/kovimallik/phytoscan3d under the MIT licence. The barley PLY dataset
will be deposited in the Norwegian Research Information Repository (NVA) upon acceptance.
The Crops3D benchmark dataset is publicly available at
https://doi.org/10.6084/m9.figshare.27313272 (Zhu et al. 2024). The ICRISAT LeasyScan
dataset is publicly available at https://doi.org/10.6084/m9.figshare.28270742 (Galba et al.
2025).
Acknowledgements
This work was supported by the PheNo, DLT-Farming and Soil2Milk from Research Council
of Norway and TWIN-NUE from Norwegian University of Life Sciences (NMBU). The
authoOpen asset ↗figshare · 10.6084/m9.figshare.27313272pdf-raw-page:15 lines:1-36Dataset · publicimallik/phytoscan3d under the MIT licence. The barley PLY dataset
will be deposited in the Norwegian Research Information Repository (NVA) upon acceptance.
The Crops3D benchmark dataset is publicly available at
https://doi.org/10.6084/m9.figshare.27313272 (Zhu et al. 2024). The ICRISAT LeasyScan
dataset is publicly available at https://doi.org/10.6084/m9.figshare.28270742 (Galba et al.
2025).
Acknowledgements
This work was supported by the PheNo, DLT-Farming and Soil2Milk from Research Council
of Norway and TWIN-NUE from Norwegian University of Life Sciences (NMBU). The
authors thank Sara Catarina Costa Laranjeira, Min Lin and other NMBU growth facility staff
for plant care and scanning operOpen asset ↗figshare · 10.6084/m9.figshare.28270742pdf-raw-page:15 lines:1-36Code / dataset availability confirmedCrossref · OpenAlex · checked 14 Sept 2026
Abstract Warmer temperatures, permafrost thaw, and increased wildfire activity are driving rapid ecological change across the Arctic, significantly altering plant productivity and aboveground biomass (AGB). These rapid changes highlight the urgent need to improve monitoring of vegetation dynamics in the Earth’s northern ecosystems, where high spatiotemporal heterogeneity occurs at scales finer than those captured by traditional satellite observations. The growing use of unoccupied aerial systems (UASs) presents an opportunity to overcome this limitation. Yet, the diversity of UAS platforms, sensors, and data collection and processing workflows presents challenges for developing standardized, generalizable approaches. To address this challenge, we compiled 672 AGB plots co-located with 183 UAS-based structure-from-motion (SfM) or light detection and ranging (LiDAR) surveys collected across the Arctic. Here, we: (1) evaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB, (2) assessed scaling errors and their sources in two recent satellite-based AGB products derived from Landsat and moderate resolution imaging spectroradiometer, and (3) demonstrated the use of high-resolution AGB maps to quantify biomass variation across tundra plant functional types (PFTs) and to monitor post-fire recovery. Our results show that both SfM and LiDAR accurately captured AGB and its variability across tundra PFTs using a random forest model (overall root mean squared error: 0.332 kg m –2 ), with mapping performance varying slightly by region and data source. Using UAS-derived AGB maps as a benchmark, we identified systematic biases in satellite-derived AGB products, largely attributable to the magnitude of AGB and structural heterogeneity within coarse-resolution pixels. Applying our model to repeat UAS surveys following a tundra fire on Seward Peninsula, we observed rapid AGB recovery in non-shrub patches, with biomass recovering to pre-fire levels within two years. In contrast, shrub patches recovered more slowly, with AGB gains continuing over 2–4 years through both in-patch growth and lateral expansion (via dispersal) into remaining burned areas. Overall, these findings support the generalizability of UAS-based SfM and LiDAR data for estimating tundra AGB and highlight the need for broader collection and synthesis of such data to improve ecological monitoring and model benchmarking in the Arctic.
Why it matches plant phenotyping methodsUASのSfMおよびLiDARから植物群落の地上部 biomass (AGB) を推定する手法の一般化性能を評価し、衛星推定値のベンチマークにも用いており、植物形質取得が研究の中心である。
abstractevaluated the generalizability of UAS-derived canopy structure derived from high-resolution SfM and LiDAR for estimating AGB
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe codes and training data is available on GitHub: https://github.com/Daryl-Open asset ↗pdf-page:20 lines:1-30Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Spatially accurate estimates of forest above-ground biomass (AGB) are indispensable for carbon-stock accounting and sustainable silviculture. Existing mapping approaches face challenges in densely vegetated Coastal Plain forests because of seasonal optical variability, radar–optical saturation, and limited wall-to-wall structural information. We aimed to (i) develop and evaluate a multisensor, AI-enabled fusion framework for landscape-scale AGB mapping, (ii) quantify the added value of seasonal optical data and photogrammetric canopy-height profiles, and (iii) interpret model drivers using explainable artificial intelligence (AI) to relate predictors to forest structure and composition. We mapped AGB across ~ 10,500 km 2 in southeastern North Carolina using wall-to-wall predictors from optical, radar, and photogrammetric sources. Forest Inventory and Analysis plot data (n = 305) were used to train and evaluate an ensemble of gradient-boosted tree models (CatBoost, LightGBM, XGBoost) and a neural network (RealMLP) via cross-validation. Model behavior was interpreted using feature importance and partial dependence analysis. Expanding Sentinel-2 temporal coverage from summer-only to four-season composites improved normalized RMSE by 8.7%. Incorporating canopy-height profiles from NAIP produced the largest accuracy gain, lowering nRMSE by 15.9–18.0% relative to the multisensor baseline, which underscores the critical value of structural information for AGB prediction. Three key predictors illustrated complementary ecological dimensions: the 10th percentile canopy height captured canopy openness, L-band polarimetric alpha indicated volume-scattering regime, and spring red-edge reflectance captured vegetation biochemistry. These findings show that fusing structure, polarimetry, and spectral phenology yields robust AGB maps and improves generalizability across heterogeneous landscapes. This transferable, broadly accessible framework integrating structural, polarimetric, and spectral phenology data enables landscape-scale AGB monitoring and supports targeted conservation planning, restoration tracking, and adaptive management for carbon sequestration. The incorporation of high-resolution wall-to-wall structural data is particularly valuable for improving the accuracy and usability of forest AGB maps, thereby informing more responsive decision-making.
Why it matches plant phenotyping methods森林の地上部バイオマスという植物群落形質を対象に、光学・レーダー・写真測量データを融合した推定フレームワークを開発・評価しており、形質推定手法が研究の中心である。
abstractdevelop and evaluate a multisensor, AI-enabled fusion framework for landscape-scale AGB mapping
Reproduction assets foundThe authors explicitly state that the code reproducing all figures and analyses is archived in a GitHub repository and permanently preserved via Zenodo (doi 10.5281/zenodo.18688899). The GEDI-derived CHM25 product (Zenodo 11176727) is a cited prior-work dataset from Wang et al. (2025), not this paper's own asset, and FCode · publicGEDI data products are distributed by NASA’s Land Processes
Distributed Active Archive Center and are accessible through
Google Earth Engine. The code used to reproduce all figures
and analyses has been archived in a GitHub repository (https://
github.com/ChaoEcohydroRS/NC_SoutheastBiomass) and
permanently preserved via Zenodo (https://doi.org/10.5281/zenodo.18688899, submitted on 20 February 2026).
Declarations
Conflict of interest The authors declare no competing inter-
ests.
Disclaimer The findings and conclusions in this publication
are those of the author(s) and should not be construed to rep-
resent any official USDA or U.S. Government determination or
policy.
Open Access This articleOpen asset ↗Zenodo · 10.5281/zenodo.18688899pdf-raw-page:23 lines:1-89Code / dataset availability confirmedEurope PMC · OpenAlex · checked 5 Sept 2026
The vertical heterogeneity of rice canopy structure limits the accuracy of inverting leaf physicochemical parameters using traditional radiative transfer models, while LiDAR-based 3D reconstruction remains costly for large-scale applications. To address these challenges, this study proposes a method for constructing 3D rice canopy scenes using "Precision Mode" and "Rapid Mode" strategies. The Precision Mode builds detailed structural models based on measured morphological parameters, validated via the LESS 3D radiative transfer model. To overcome the limitations of obtaining detailed morphology via UAV remote sensing, the Rapid Mode employs machine learning algorithms-specifically Support Vector Machine (SVM), Random Forest (RF), and XGBoost-to map easily accessible parameters (LAI, Above-ground Biomass, Plant Height, and Transplanting Date) to detailed 3D structural parameters. Results indicate that XGBoost achieves the highest accuracy in the Rapid Mode. Furthermore, simulated spectra under both modes showed high consistency with measured spectra, yielding average RMSE values of 0.0104 (R 2 = 0.9965) for the Precision Mode and 0.0307 (R 2 = 0.9694) for the Rapid Mode. Although the spectral accuracy of the Rapid Mode is slightly lower, its modeling efficiency is significantly enhanced, retaining a strong capability to reproduce spectral response characteristics across growth stages. This approach provides an effective tool for analyzing vertical spectral response mechanisms and offers an efficient data simulation scheme for UAV remote sensing parameter inversion based on 3D radiative transfer models.
Why it matches plant phenotyping methodsイネ群落の3D構造を構築・推定する手法を開発し、放射伝達モデルと実測スペクトルで検証しており、植物形質の取得・再現が研究の中心です。
abstractthis study proposes a method for constructing 3D rice canopy scenes using "Precision Mode" and "Rapid Mode" strategies.
Reproduction assets foundThe paper's Data Availability statement says the collected phenotype/structural/spectral data are publicly available on the authors' GitHub repository (allowed URL), while the analysis code is only available from the corresponding author upon request (request_only, no public URL).Dataset · publicThe data collected and used in this study are publicly available at: https://github.com/baijc4095-code/2024data . The code used for analysis can be obtained from the corresponding author upon reasonable request.Open asset ↗baijc4095-code/2024datalines:240-256Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 15 Sept 2026
Climate change threatens global Chinese cabbage ( Brassica rapa L. ssp. pekinensis ) production, a cool-season crop essential for Asian markets. With optimal growth at 18-20°C and severe disruption above 25°C, developing heat-resilient varieties is critical. This study integrated high-throughput 3D multispectral phenotyping with multivariate analysis to characterize temporal heat stress responses in 18 Chinese cabbage genotypes. Seedlings were subjected to heat stress (setpoint 40/35°C day/night; measured 35.7/31.5°C day/night air temperature) or controls (setpoint 25/20°C day/night; measured 25.0/17.7°C day/night air temperature) for 14 days, with continuous non-destructive monitoring of 14 morphological and spectral parameters using PlantEye F600 multispectral 3D scanner. Principal component analysis of temporal phenotyping data explained 62-68% of variance, enabling quantitative assessment of phenotypic stability through Euclidean distance measurements in PC space. Temporal analysis revealed crop-specific response patterns with maximum treatment separation at 3 days after treatment (DAT) (ΔC=3.27), reflecting Chinese cabbage’s rapid heat sensitivity as a cool-season crop, followed by progressive acclimation by 14 DAT (ΔC=1.41). Early responses (3-5 DAT) were dominated by morphological parameters, transitioning to physiological adjustments (10-14 DAT) characterized by spectral indices. Under heat stress, plants prioritized evaporative cooling through increased transpiration (four-fold increase) over carbon assimilation. A critical finding was the disproportionately greater reduction in root biomass relative to shoot biomass under to heat stress, with root biomass declining 38-47% versus 20% in shoots. Strong correlations (r>0.8) between 3D imaging parameters and destructive biomass measurements validated the non-destructive approach’s reliability. Notably, image-based root surface area analysis correlated strongly with actual root biomass (R 2 =0.698, p<0.001), enabling practical assessment of root area without conventional destructive processing. Based on integration of phenotypic stability (Euclidean distances in PC space) and biomass production under heat stress, this approach identified four distinct heat tolerance strategies: stable-productive genotypes (ideal breeding targets combining phenotypic stability with high heat-stress biomass production), stable-conservative genotypes (phenotypic stability with lower production), plastic-productive genotypes (substantial phenotypic changes yet high biomass production), and plastic-sensitive genotypes (phenotypically unstable and poor biomass production). This validated framework accelerates heat-tolerant Chinese cabbage breeding through efficient high-throughput phenotyping, enabling targeted genotype selection for diverse production environments facing climate warming.
Why it matches plant phenotyping methods3Dマルチスペクトルスキャナによる非破壊・時系列表現型取得と、その解析・検証が研究の中心であり、熱ストレス下の形態・生理形質を定量化する実質的なハイスループット表現型解析研究である。
abstractThis study integrated high-throughput 3D multispectral phenotyping with multivariate analysis to characterize temporal heat stress responses in 18 Chinese cabbage genotypes.
Reproduction assets foundThe paper states its collected phenotyping data are available in the supplementary material hosted with the article (open access under CC BY-NC-ND), making the paper-specific phenotype dataset publicly actionable via the article DOI. The analysis code, however, is only available from the corresponding author uponReasonDataset · publichrough field phenotyping.) between RDA and the World Vegetable Center (WorldVeg)” and by the long-term strategic donors to the WorldVeg: Taiwan, the United States, Australia, the United Kingdom, Germany, Thailand, South Korea, Philippines, and Japan.
Footnotes
Appendix A
Supplementary data to this article can be found online at https://doi.org/10.1016/j.plaphe.2026.100221 .
Appendix A.
Supplementary data
The following is the Supplementary data to this article.
Multimedia component 1
Data availability
The data collected and used in this study are available in the supplementary material. The code used for analysis can be obtained from the corresponding author upon reasonable request.
ReferenceOpen asset ↗lines:486-514Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
This paper addresses the problem of automated segmentation of plant green biomass in field crop images aimed at improving the accuracy of crop and weed identification. To construct a training dataset for neural network models, an automatic annotation algorithm is proposed, enabling the generation of polygonal object masks without human intervention. The method is based on adaptive analysis of color characteristics of plant fragments with iterative narrowing of the hue range in the HSV color space, combined with an integral quality metric that accounts for the dynamics of contour area and shape. The proposed method achieved an IoU of 93.22% and a DSC of 96.30%, demonstrating a high level of agreement between automatic and manual annotations. The generated masks are used to train segmentation models of the YOLO11-seg family. Models of different scales (n, s, m, l, x) were trained and evaluated using standard metrics, including Intersection over Union (IoU), mAP@0.5, mAP@0.5–0.95, F1-score, and Precision–Recall (PR) curves. Experimental results demonstrate that models trained on automatically generated annotations achieve stable segmentation performance of plant green biomass. The best results were obtained with the YOLO11m-seg model, achieving an F1-score of 0. 772. The results confirm the effectiveness of the proposed approach and demonstrate acceptable segmentation quality, supported by both quantitative metrics and visual analysis. The developed automatic annotation algorithm can be used to expand training datasets in computer vision tasks for agricultural applications.
Why it matches plant phenotyping methods植物の緑色バイオマスを画像から自動抽出するポリゴン注釈法を開発し、手動注釈との一致度で検証しているため、植物表現型取得・抽出法が中心である。
abstractan automatic annotation algorithm is proposed, enabling the generation of polygonal object masks without human intervention
Reproduction assets foundThe authors publicly released the paper-specific generated dataset of polygonal segmentation annotations (masks and supporting materials) on Hugging Face. CVAT is only a generic annotation tool, and no author analysis code or trained model checkpoints are explicitly deposited.Dataset · publicThe generated dataset with polygonal segmentation annotations of crop and weed plants, produced using the proposed algorithm and based on the LincolnBeet Dataset, is publicly available on Hugging Face at: https://huggingface.co/datasets/ivliev123/polygonal_marking_plant_objectsOpen asset ↗Hugging Face · ivliev123/polygonal_marking_plant_objectshtml-lines:438-462Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 5 Sept 2026
Effective high-throughput phenotyping is crucial for modern plant breeding, yet the optimal image acquisition parameters for UAV-based systems in forage crops remain poorly defined. We optimized UAV-based phenotyping methods for a Megathyrsus maximus biparental population, examining how ground sampling distance (GSD), environment, and harvest date affect the accuracy of RGB-derived digital traits in predicting yield and canopy height. Machine learning algorithms and mixed model analyses were applied to evaluate predictive power and heritability. Pixel count and Haralick's entropy showed strong correlations with conventional yield measurements, particularly in Environment 2, while most vegetative indices were poor predictors. Integrating machine learning substantially enhanced predictive power for green and dry matter yield (r > 0.80). For canopy height, machine learning models achieved correlations of 0.71 with ground truth measurements despite weak pairwise correlations. Mixed model analysis revealed high broad-sense heritability (0.7 < H 2 < 0.87) for yield traits, pixel count, and entropy, while vegetative indices and canopy height showed greater environmental susceptibility. Moderate GSD resolutions (0.5–1.0 cm) consistently outperformed both very high (0.27 cm) and very low (1.5 cm) resolutions. Coincidence index analysis demonstrated 80% correspondence between top genotypes ranked by pixel count and conventionally measured dry matter yield. This study provides an optimized framework for UAV-based phenotyping in M. maximus , demonstrating that combining advanced digital traits with machine learning accurately predicts key agronomic traits and significantly enhances genotype selection efficiency in forage breeding programs.
Why it matches plant phenotyping methodsUAV画像取得条件、RGBデジタル形質、機械学習による収量・草高推定を最適化・検証する研究であり、植物表現型取得法が中心的です。
abstractWe optimized UAV-based phenotyping methods for a Megathyrsus maximus biparental population, examining how ground sampling distance (GSD), environment, and harvest date affect the accuracy of RGB-derived digital traits in predicting yield and canopy height.
Reproduction assets foundThe paper's data availability statement points to a public Mendeley Data repository containing the study's UAV-derived digital phenotyping and conventional trait datasets. No author analysis code repository is explicitly deposited.Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://data.mendeley.com/datasets/jrrb76x82h/1 .Open asset ↗jrrb76x82h/1lines:435-487Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Introduction Herbicide dose-response assays are routinely implemented to compare herbicide resistance among weed biotypes, which requires plant biomass to estimate the dose that reduces growth by 50% relative to untreated plants (GR 50 ). The Phenospex TraitFinder is a high-throughput, non-destructive, digital phenotyping system that collects data from 7 spectral parameters and 13 morphological parameters, including Digital Biomass (DB), which offers the opportunity for researchers to eliminate the time and labor associated with manual biomass collection. However, DB is the product of 3D Leaf Area and Plant Height (PH) Mean, making it a measurement of plant volume and an indirect indicator of biomass. While DB is highly correlated with true biomass, digitally collected plant volume data has not been implemented for dose-response assays or assessed for accuracy relative to true biomass data. Additionally, inaccurate PH measurements could impact the accuracy of DB measurements. Methods This study sought to assess the accuracy and utility of DB and the 19 remaining parameters in dose-response assays by comparing dose-response curves and GR 50 estimates generated from digital data and fresh biomass (FB) data. Accuracy of PH measurements were also assessed by comparing digital and manual measurements with the paired t-test. Pre-emergence dose-response assays using fomesafen and atrazine were implemented with common lambsquarters ( Chenopodium album L.). At 21 days after treatment, manual measurements of FB and PH were collected following digital data collection. Results Consistently strong correlations ( r = 0.97, P < 0.05) were observed between digitally collected data and their equivalent manual measurements. Comparisons of the dose-response curves indicated that only 3D Leaf Area, DB, Convex Hull Area, Projected Leaf Area, and Voxel Volume Total generated highly similar curves and GR 50 estimates relative to FB data, indicating that any one or all of these parameters could be utilized instead of FB. Small differences (approximately 1.06 to 1.77 mm) between manual and digital PH measurements were identified with the paired t-test, but since DB consistently produced similar dose-response curves and GR 50 estimates relative to FB, these differences did not impact the accuracy of DB measurements. Discussion Without requiring manual biomass collection, turnaround time for dose-response and other phenotyping assays decreases and allows faster sharing of research. Furthermore, herbicide-resistant plants can be preserved for phenotyping at later growth stages, tissue collection, and to produce progeny for future experiments.
Why it matches plant phenotyping methodsデジタル表現型システムで植物体積・草丈などを取得し、手作業の生体重測定との精度比較および除草剤用量反応曲線への有用性を検証しており、表現型取得法が中心です。
abstractThe Phenospex TraitFinder is a high-throughput, non-destructive, digital phenotyping system that collects data from 7 spectral parameters and 13 morphological parameters
Reproduction assets foundThe paper's digital phenotyping dose-response datasets are publicly deposited: the data availability statement names Ag Data Commons DOI 10.15482/USDA.ADC/29815082 and a figshare link, both paper-specific. No author analysis code repository is explicitly stated.Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: 10.15482/USDA.ADC/29815082 or https://figshare.com/s/64d1bbac59a95c4721f1 .Open asset ↗figshare · 10.15482/USDA.ADC/29815082lines:548-573Code / dataset availability confirmedOpenAlex · checked 5 Sept 2026
Abstract Modern agriculture faces the dual challenge of sustainably increasing food production while mitigating the environmental impact of intensive monocultures. Mixed cropping, which is the cultivation of multiple species or varieties, may provide ecological benefits that address productivity and environmental sustainability challenges. However, evaluating its multifunctionality in conventional agricultural field experiments is costly and labour-intensive, and small sample sizes and high spatial variability often make it difficult to detect the statistical significance of mixed cropping effects. This study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs) to efficiently assess the multifunctionality of mixed cropping systems. We conducted a field experiment comparing monocultures of oat, rye, and barley; intraspecific mixed cropping combining three oat varieties; and interspecific mixed cropping combining oat, rye, and barley. Using UAV-derived data across the entire field, including vegetation cover, plant height, and the normalised difference vegetation index, we evaluated five multifunctionalities (biomass production, spatial variability in biomass production, early canopy closure, lodging resistance, and lodging resilience). This framework reveals that mixed cropping outperforms monocropping in several key ecological functions. The proposed UAV-based HTP approach enables cost-effective, robust, and scalable evaluation of mixed cropping systems, facilitating their optimisation for multifunctionality and contributing to the advancement of sustainable agriculture.
Why it matches plant phenotyping methodsUAV画像を用いた高スループット圃場フェノタイピング枠組みを導入・検証し、植生被覆、草丈、NDVIから複数の植物形質・状態を抽出しており、フェノタイピング手法が中心的です。
abstractThis study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs)
Reproduction assets foundThe paper's Data availability statement explicitly deposits the datasets generated and analysed (UAV-derived phenotyping measurements) in a public Zenodo repository with a DOI matching an allowed URL.Dataset · publicThe datasets generated and analysed during the current study are available in the Zenodo repository, https://doi.org/10.5281/zenodo.17042273.Open asset ↗Zenodo · 10.5281/zenodo.17042273lines:197-235Code / dataset availability confirmedOpenAlex · Europe PMC · checked 14 Sept 2026
A detailed characterization of root system architecture (RSA) and growth dynamics is key to develop stress-resilient maize varieties. We evaluated sixty-five Mediterranean maize inbred lines using automated high-throughput phenotyping under controlled conditions. Shoot and root traits were extracted from imaging data during early vegetative development, revealing significant genotype-specific variation in root biomass-related traits (total root length, total root volume), root architecture (root angle, root system depth, root system width), and relative growth rates. Notably, lines previously classified as heat and drought stress-resilient or stress-sensitive based on above-ground development did not group according to particular root traits, indicating that multiple strategies may underlie tolerance to combined stress. We identified lines with contrasting RSA, including deeper roots, shallower roots, or overall larger root systems, that offer new opportunities for resilience breeding. Our results underscore root traits as critical yet underexploited targets for improving stress resilience and resource efficiency.
Why it matches plant phenotyping methods自動化ハイスループット画像解析により根系形態・成長形質を抽出する表現型取得が研究の主要手段であり、根系構造の実質的な応用解析に該当する。
abstractWe evaluated sixty-five Mediterranean maize inbred lines using automated high-throughput phenotyping under controlled conditions.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicSupplementary Materials
The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/plants15060935/s1 , Figure S1: Repeatability of image-derived shoot (a) and root traits (b) of the tested 65 maize inbred lines over time.Open asset ↗lines:68-215Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
BACKGROUND: Root biomass serves as a critical indicator of plant eco-physiological status and crop productivity, yet its non-destructive monitoring remains challenging because of its underground location. The use of transparent nutrient film technique (NFT) systems enables direct observation of entire root systems, rendering image-based phenotyping feasible. In this study, we investigated and compared the performance of RGB and hyperspectral imaging for predicting root dry weight in hydroponically grown spinach (Spinacia oleracea L.). RESULTS: Using 430 root segments divided from 60 plants, three models were developed: (1) an area-based regression based on root coverage, (2) a convolutional neural network (CNN) using RGB images, and (3) a partial least squares regression (PLSR) model using hyperspectral data (450-950 nm). The area-based regression exhibited limited accuracy (R² = 0.446) because of saturation at high root coverage. The CNN model improved predictive performance (R² = 0.739) but tended to overestimate sparse roots as a result of resolution constraints. The PLSR model achieved the highest accuracy (R² = 0.822, RMSE = 0.019 g/segment), with significantly lower error than RGB-based approaches (P < 0.01). Variable importance in projection analysis indicated that PLSR effectively exploited spectral signatures at 450 nm (background contrast) and 750 nm (tissue scattering), thereby maintaining stable accuracy across the full biomass range. When validated using 104 independent plants, the PLSR model achieved high predictive accuracy. Furthermore, as a proof of concept, this model successfully visualized the spatiotemporal dynamics of root biomass accumulation over 50 days, with only a 7.70% relative error at harvest. CONCLUSIONS: To our knowledge, this study is among the first to demonstrate the non-destructive monitoring of biomass distribution within entire root systems under production conditions. Hyperspectral imaging combined with PLSR outperforms RGB-based approaches by capturing spectral signatures that reflect internal tissue properties of roots, thereby overcoming limitations caused by morphological occlusion. This approach provides a robust tool for precision agriculture and high-throughput phenotyping, enabling continuous assessment of root growth through simple modifications to the existing hydroponic systems.
Why it matches plant phenotyping methodsRGB・ハイパースペクトル画像と機械学習／PLSRを用いて根乾物重を非破壊推定・検証する方法研究であり、植物表現型の取得と定量化が中心である。
abstractThe use of transparent nutrient film technique (NFT) systems enables direct observation of entire root systems, rendering image-based phenotyping feasible.
Reproduction assets foundThe paper's Data availability statement deposits the paper-specific phenotyping assets (raw hyperspectral images, RGB images, and root dry weight measurements) in a Zenodo record. The provided URL includes a token and 'preview=1', suggesting the record may not yet be fully open, but it is the authors' stated public URLDataset · publicThe datasets generated and analyzed during the model construction of the current study are available in the Zenodo repository: [https://zenodo.org/records/18072801?preview=1&token=eyJhbGciOiJIUzUxMiJ9.eyJpZCI6ImFiYTkzMzY2LTIzZjktNDlkMy1iZTBjLTk3M2E5YTUyOTFmZCIsImRhdGEiOnt9LCJyYW5kb20iOiIzNGE1ZjMxNDZhYjhiYjlhZWRiOWFjNzBkNzcwY2I3NyJ9.uR4HfosoSaVWhtSblMOS1v9bJFA5MvHwXvcW9uoNbcTWRDU4RNxZpVHjXTC3ulBM1JTlBbeHp_4T5EcILawxdg].The dataset includes:
- Raw hyperspectral images and data- RGB images
- Root dry weight measurementsOpen asset ↗Zenodo · 18072801lines:176-248Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Service crops are grown to provide ecosystem services in viticulture, but their adoption remains limited due to their competition with grapevine for soil resources. To identify trade-offs between services, the effect of service crops management strategies on grapevine performances still need further research. This dataset presents data from two experiments conducted to study the effect of service crops management on soil resources and grapevine performances. The inter-row vegetation was sampled in two Mediterranean vineyards using quadrats for biomass estimation. In addition, an unmanned aerial vehicle (UAV) was regularly flown over the vineyards for a period spanning more than four years in total over the two vineyards. The dataset presented here includes both raw data acquired during fieldwork and processed data derived from this raw inputs. The raw data consists of image series captured by two UAVs during each flight campaign, including RGB and multispectral imagery. Images were acquired between 2021-06-10 and 2022-07-29 for the first vineyard, and between 2023-06-08 and 2025-03-12 for the second vineyard. Based on these raw data, the processed data comprises spatial vectors, raster layers, and dense point clouds generated from UAV images using a Structure from Motion (SfM) photogrammetry workflow, at a 5 cm spatial resolution. The raster layers and dense point clouds provide specific information on vineyard characteristics for each UAV flight date, including elevation, vegetation indices, visible and near-infrared reflectance, and canopy height. In addition, the processed data include measurements of vegetation dry biomass, as well as separate measurements of dry biomass and leaf area measured for selected service crops species. This dataset can be reused for the calibration and/or evaluation of classification algorithms aimed at discriminating vines from the inter-row vegetation, or as part of a larger dataset to explore relationships between remotely-sensed vegetation indices and field-measured vegetation biomass or surface.
Why it matches plant phenotyping methodsUAV画像とSfM処理により、植生指数・樹冠高・バイオマス等の植物形質を取得した再利用可能なデータセットで、分類アルゴリズムの校正・評価用途も明示されており、植物フェノタイピング手法・データ基盤が中心です。
abstractThe dataset presented here includes both raw data acquired during fieldwork and processed data derived from this raw inputs.
Reproduction assets foundThe paper is a Data in Brief article describing a public dataset on Research Data Gouv (doi: 10.57745/MXM55R) containing UAV RGB/multispectral imagery, SfM-derived rasters and point clouds, and field-measured vegetation biomass/leaf-area data from two Mediterranean vineyards — directly the paper's phenotyping inputs. ADataset · publicollected in vineyards located in southern France near Montpellier (43°32.5243′N, 3°50.8240′E). Data are stored on Research Data Gouv, a remote storage solution curated by the French Department of Research.
Data accessibility
Repository name: Research Data Gouv
Data identification number: doi: 10.57745/MXM55R
Direct URL to data: https://doi.org/10.57745/MXM55R
Related research article
None
1.
Value of the Data
•
The fine scale imaging of vineyards (i.e., 5 cm resolution) allows for classification of the vegetation in the vineyard inter-rows, and subsequent exploration of its respective dynamics.
•Open asset ↗Research Data Gouv · 10.57745/MXM55Rlines:1-47Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 14 Sept 2026
Pea (Pisum sativum) production is challenged by drought stress. Traditional methods for assessing drought tolerance are limited, and high-throughput phenotyping (HTP) can facilitate the rapid and automated assessment of plant traits. Herein, 180 Pisum spp. accessions were evaluated using an indoor HTP platform under two irrigation treatments, control (70% field capacity) and drought stress (30% field capacity), for 50 days. A combination of digital phenotyping via imaging and manual measurements was used to analyse biomass-related, architectural, and physiological traits. Drought conditions resulted in significant reductions in biomass-related traits including fresh weight (47%), total leaf area (43%), and dry weight (41%). In contrast, PSII photochemical efficiency, leaf weight ratio, and solidity showed negative sensitivity index values (ranging from -7% to -1%), indicating comparatively lower sensitivity to drought and suggesting relative stability of these traits under water-limited conditions. The high heritability value for water use efficiency (0.87) suggests that this parameter may be useful for distinguishing pea's responses to suboptimal soil moisture levels. Principal component analysis (PCA) highlighted patterns of trait variation and associations among biomass-related traits, such as fresh weight, dry weight, and leaf area, which were sensitive to drought conditions. This suggests that the plants may use a combination of strategies to cope with water limitations. Furthermore, studying the significant variation in drought response among the diverse Pisum species and subspecies revealed distinct adaptation strategies. These findings support the development of crops that are resilient to the negative effects of climate change.
Why it matches plant phenotyping methods屋内HTPプラットフォームと画像ベースのデジタルフェノタイピングを用いて、多数アクセッションの形態・生理形質を取得・解析しており、フェノタイピング手法の実質的な適用が研究の中心です。
abstracthigh-throughput phenotyping (HTP) can facilitate the rapid and automated assessment of plant traits
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe analysis software for the RGB side‐view imaging has been developed in Python by the NPEC data team, the source is published on Github, accessible via this link: https://github.com/NPEC‐NL/greenhouse_m5 .Open asset ↗NPEC‐NL/greenhouse_m5lines:68-83Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Grapevines ( Vitis vinifera L.) undergo structural and physiological changes throughout the growing season, progressing through distinct phenological stages that require regular monitoring. This dataset consists of high-resolution point cloud data acquired with a stationary terrestrial laser scanner (TLS) to document grapevine development from early leaf development to dormancy. Georeferenced point clouds were generated from 15 TLS scans along two vineyard rows at nine phenological stages. The dataset also includes multispectral and RGB photogrammetric point clouds and orthorectified raster products from an unmanned aerial vehicle survey conducted before harvest. Ground-truth measurements leaf area index, grape production, and pruning wood biomass were collected for each monitored grapevine. As a result, the dataset provides multi-temporal TLS observations that support grapevine structural analysis and development, phenological monitoring, and can be used for the development of AI-based models for precision viticulture.
Why it matches plant phenotyping methodsブドウの生育・構造・フェノロジーを対象とするTLS点群および関連画像データセットであり、植物フェノタイピング用の再利用可能なデータ基盤として中心的です。
titleTLS-grapevine2024: A terrestrial laser scanner point cloud dataset of grapevines at different phenological stages.
Reproduction assets foundThe paper is a Data in Brief article describing the TLS-grapevine2024 dataset itself, publicly deposited on Zenodo with DOI 10.5281/zenodo.16751663. This is a paper-specific, openly available asset containing the TLS point clouds, UAV imagery/rasters, and ground-truth agronomic measurements (LAI, grape production, prunDataset · publicditions: clear sky.
Data source location
Institution: University of Trás-os-Montes e Alto Douro
City/Town/Region: Arroios, Vila Real, Norte
Country: Portugal
Coordinates: 41°17′28.83″N 7°43′17.90″W,
Altitude: 435 m
Data accessibility
Repository name: Zenodo
Data identification number: 10.5281/zenodo.16751663
Direct URL to data: https://doi.org/10.5281/zenodo.16751663
Related research article
None
1.
Value of the Data
•
This dataset covers nine phenological stages of grapevine growth from April 2024 to January 2025, providing multi-temporal terrestrial laser scanner (TLS) observations for structural and phenological analysis.
•
It includes TLS point clouds collected at multiple stages and muOpen asset ↗Zenodo · 10.5281/zenodo.16751663lines:1-50Code / dataset availability confirmedCrossref · checked 14 Sept 2026
This data descriptor presents a dataset comprising crop and soil parameters measured in winter wheat fields near the town of Knezha, Bulgaria. The data were collected as part of a project evaluating the potential of vegetation indices derived from Sentinel-2 satellite imagery to predict biophysical and biochemical crop parameters. The core dataset consists of measurements obtained from 20 m × 20 m field plots and includes a broad range of parameters: leaf area index, fraction of absorbed photosynthetically active radiation, vegetation cover fraction, chlorophyll content, above-ground biomass, plant nitrogen content, biological yield, surface soil moisture, spectral reflectance, plant density, crop height, visual assessments of disease or pest damage, and data on weed occurrence. The dataset is complemented by unmanned aerial vehicle imagery, crop calendars, and field management information. The main soil types in the study area were characterized through soil profiles, while meteorological data were obtained from an automated weather station. The data were collected during the 2016–2017 and 2017–2018 agricultural seasons. The dataset is freely available for download and serves as a valuable resource for researchers in remote sensing—particularly for validating satellite-derived products—as well as for specialists involved in winter wheat monitoring, modeling, and agronomic studies.
Why it matches plant phenotyping methods冬小麦の複数の植物形質を含む再利用可能なデータセットを提示し、UAV画像や衛星由来指標の検証を主目的としているため、植物フェノタイピング用データセットとして採用。
abstractThis data descriptor presents a dataset comprising crop and soil parameters measured in winter wheat fields near the town of Knezha, Bulgaria.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicDataset: In situ and UAV dataset with crop and soil parameters obtained from winter
wheat fields. https://doi.org/10.5281/zenodo.17475742.Open asset ↗zenodo · 10.5281/zenodo.17475742pdf-page:1 lines:1-56Code / dataset availability confirmedOpenAlex · Crossref · checked 13 Sept 2026
Banana (Musa spp.) fruit morphology is a key determinant of yield and quality, yet modeling its 3D structural dynamics across genotypes remains difficult. To address this challenge, we developed a generic, biomass-driven 3D structural model for banana fruit fingers that quantitatively links growth and morphology. Field experiments were conducted over two growing seasons in Hainan, China, using three representative genotypes. Morphological traits, including outer and inner arc length, circumference, and pedicel length, along with dry (Wd) and fresh weight (Wf), were measured every 10 days after flowering until 110 days. Quantitative relationships between morphological traits and Wf, as well as between Wd and Wf, were fitted using linear or Gompertz functions with genotype-specific parameters. Based on these functions, a parameterized 3D reconstruction method was implemented in Python, combining biomass-driven growth equations, curvature geometry, and cross-sectional interpolation to simulate the fruit’s bending, tapering, and volumetric development. The resulting dynamic 3D models accurately reproduced genotype-specific differences in curvature, length, and shape with average fitting R2 > 0.95. The proposed biomass-driven 3D structural model provides a methodological framework for integrating banana fruit morphology into functional–structural plant models.
Why it matches plant phenotyping methodsバナナ果実の形態形質を推定・再現するバイオマス駆動型3D構造モデルを開発し、遺伝子型間の形状を検証しており、フェノタイピング手法が中心である。
abstractwe developed a generic, biomass-driven 3D structural model for banana fruit fingers that quantitatively links growth and morphology.
Reproduction assets foundThe paper explicitly states that the source code of the Banana Morphology Simulation System and the datasets are publicly available on GitHub at the authors' URL, which matches an allowed URL. This covers the paper's phenotyping datasets and analysis/3D modeling code.Code · publicData analysis was performed using a custom-developed software platform, the Banana
Morphology Simulation System. The source code and datasets are publicly available
on GitHub (https://github.com/Interstingsun/SimBanana, accessed on 4 January 2026).Open asset ↗Interstingsun/SimBananapdf-page:5 lines:1-24Dataset · publicThe source code and datasets are publicly available
on GitHub (https://github.com/Interstingsun/SimBanana, accessed on 4 January 2026).Open asset ↗Interstingsun/SimBananapdf-page:5 lines:1-24Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Abstract Phenotyping is crucial for understanding crop trait variation and advancing research, but is currently limited by expensive, labor-intensive monitoring. New phenotypic trait monitoring methods are being proposed to reduce this so-called phenotyping bottleneck via automation. These methods are often data-driven, requiring a dataset recorded with a specific sensor and corresponding reference values for developing novel methods. To this end, we present the MuST-C (Multi-Sensor, multi-Temporal, multiple Crops) dataset, which contains field data from various sensors collected over a growing season, covering six crop species. All data was georeferenced for alignment across sensors and dates. To collect our dataset, we deployed aerial and ground robotic platforms equipped with RGB cameras, LiDARs, and multispectral cameras, aiming to capture a wide variety of modalities and observations from different viewpoints. In addition to sensor data, we also provide manually collected leaf area index and biomass reference measurements. Our dataset enables the development of novel automatic phenotypic trait estimation methods, allows comparisons across different sensors, and generalizability across crop species.
Why it matches plant phenotyping methods複数センサー・ロボットプラットフォームによる圃場フェノタイピング用データセットを構築・提供し、形質推定法の開発、センサー比較、汎化評価を可能にすることが中心的な貢献である。
abstractwe present the MuST-C (Multi-Sensor, multi-Temporal, multiple Crops) dataset
Reproduction assets foundThe paper's MuST-C multi-sensor, multi-temporal crop phenotyping dataset (RGB/multispectral images, LiDAR point clouds, LAI and biomass reference measurements) is publicly available via the authors' project webpage, and the authors' custom Python processing/loading code is publicly available on GitHub.Dataset · publicThe MuST-C dataset is available via our project webpage https://www.ipb.uni-bonn.de/data/MuST-C/or directly via the bonndata public access repository 10.60507/FK2/OX9XTM34Open asset ↗html-lines:421-440Code / dataset availability confirmedarXiv · OpenAlex · checked 13 Sept 2026
Potato yield is a key indicator for optimizing cultivation practices in agriculture. Potato yield can be estimated on harvesters using RGB-D cameras, which capture three-dimensional (3D) information of individual tubers moving along the conveyor belt. However, point clouds reconstructed from RGB-D images are incomplete due to self-occlusion, leading to systematic underestimation of tuber weight. To address this, we introduce PointRAFT, a high-throughput point cloud regression network that directly predicts continuous 3D shape properties, such as tuber weight, from partial point clouds. Rather than reconstructing full 3D geometry, PointRAFT infers target values directly from raw 3D data. Its key architectural novelty is an object height embedding that incorporates tuber height as an additional geometric cue, improving weight prediction under practical harvesting conditions. PointRAFT was trained and evaluated on 26,688 partial point clouds collected from 859 potato tubers across four cultivars and three growing seasons on an operational harvester in Japan. On a test set of 5,254 point clouds from 172 tubers, PointRAFT achieved a mean absolute error of 12.0 g and a root mean squared error of 17.2 g, substantially outperforming a linear regression baseline and a standard PointNet++ regression network. With an average inference time of 6.3 ms per point cloud, PointRAFT supports processing rates of up to 150 tubers per second, meeting the high-throughput requirements of commercial potato harvesters. Beyond potato weight estimation, PointRAFT provides a versatile regression network applicable to a wide range of 3D phenotyping and robotic perception tasks. The code, network weights, and a subset of the dataset are publicly available at https://github.com/pieterblok/pointraft.git.
Why it matches plant phenotyping methods部分点群からジャガイモ塊茎重量を推定する3D深層学習手法を開発・評価しており、植物形質取得が研究の中心である。
abstractwe introduce PointRAFT, a high-throughput point cloud regression network that directly predicts continuous 3D shape properties, such as tuber weight, from partial point clouds.
Reproduction assets foundThe paper publicly releases its authors' analysis code and trained network weights on GitHub, and a subset of its potato tuber partial point cloud dataset (with ground truth weights) on Hugging Face. Both are paper-specific, public, and actionable.Code · publicThe code, network weights, and a subset of the dataset are publicly available at https://github.com/pieterblok/pointraft.git .Open asset ↗pieterblok/pointraftlines:1-93Dataset · publicA subset of the datasets generated and/or analyzed during this study is publicly available at: https://huggingface.co/datasets/UTokyo-FieldPhenomics-Lab/3DPotatoTwinOpen asset ↗UTokyo-FieldPhenomics-Lab/3DPotatoTwinlines:447-463Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Timely and accurate in-season estimation of aboveground biomass (AGB) and yield in winter wheat is crucial for optimizing resources and ensuring food security. Light use efficiency (LUE) models have proven effective in estimating crop gross primary productivity and yield across sites and years due to their strong physiological and ecological mechanisms. However, existing studies are limited to satellite applications and have not utilized unmanned aerial vehicle (UAV) imagery. This study proposed a practical framework for accurate in-season estimation of AGB and yield in winter wheat from UAV imagery by combining a LUE model and machine learning (LUE-ML) across five plot experiments. Subsequently, the scalability of the LUE-ML yield prediction approach was assessed in farmer's fields from five counties of Jiangsu Province, China. The results demonstrated that while the AGB for the heading stage was estimated by combining the retrieved LAI and 20-day accumulated meteorological features, the AGB during the post-heading period could be estimated accurately using the stage-skipping or stage-progressive strategy, with the latter ( R val 2 = 0.93) outperforming the former ( R val 2 = 0.84). The combination of one spectral index, LUE-derived AGB, and three 20-day accumulated relative meteorological features (Comb. #6) performed the best ( R cal 2 = 0.89; R val 2 ≥ 0.79) for yield prediction among all combinations. When extended to farmer-field yield prediction across the province, Comb. #6 also achieved acceptable performance. This study suggests the use of LUE-ML models represents a significant step forward towards mechanistic estimation of AGB and yield for cereal crops from UAV imagery.
Why it matches plant phenotyping methodsUAV画像から冬コムギの地上部バイオマスと収量を推定するLUE-ML手法を開発・評価し、圃場で性能検証しているため、植物形質取得・推定が研究の中心である。
abstractThis study proposed a practical framework for accurate in-season estimation of AGB and yield in winter wheat from UAV imagery by combining a LUE model and machine learning (LUE-ML) across five plot experiments.
Reproduction assets foundThe paper's Data Availability statement explicitly hosts the core code for the two UAV-LUE AGB estimation strategies and related test data in a public GitHub repository; other data are only available upon request.Code · publicThe core code for the two strategies and related test data in the UAV-LUE method for estimating wheat AGB are hosted in a public repository: https://github.com/qtaocheng/agb-estimation-uav-lue-two-strategies . Other data that support the findings of this study are available from the corresponding author (T.C.) upon reasonable request.Open asset ↗qtaocheng/agb-estimation-uav-lue-two-strategieslines:507-519Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Nature-based climate solutions, such as agroforestry, offer potential for carbon sequestration while providing co-benefits. However, the lack of scalable and low-cost measurement, reporting, and verification (MRV) systems limits smallholder participation in carbon markets. This study presents the DiameterAlgorithm, a non-contact method for tree diameter estimation using semantic segmentation and two-dimensional photogrammetry. The fine-tuned model achieved a mean intersection over union (mIoU) of 0.937. The algorithm was tested on image datasets from managed trees settings in Kenya (n = 142) and Pennsylvania, USA (n = 40), with regression analysis showing high accuracy (R² = 0.97, RMSE = 2.20–2.23 cm). Bias analysis showed slight overestimation for small to medium trees (5–35 cm DBH) and underestimation for larger trees (>36 cm DBH), with an overall mean bias of +0.68 cm. Coupled with allometric equations, the DiameterAlgorithm enables scalable, site-level biomass estimation for carbon markets.
Why it matches plant phenotyping methods樹木直径という植物形態形質を画像から推定する手法を開発し、複数地域のデータで精度・バイアスを検証しており、フェノタイピング手法が研究の中心である。
abstractThis study presents the DiameterAlgorithm, a non-contact method for tree diameter estimation using semantic segmentation and two-dimensional photogrammetry.
Reproduction assets foundThe paper publicly releases its tree image dataset (calibration/evaluation images from Kenya and Pennsylvania) on ScholarSphere and the containerized diameter estimation tool on Docker Hub, both explicitly stated in the data availability statement.Dataset · publicThe image dataset that was used to calibrate and evaluate the algorithm can be found on the ScholarSphere repository
of the Pennsylvania State University (https://scholarsphere.psu.edu/resources/08a985a4-d878-4fa9-b2f2-60601005Open asset ↗ScholarSphere · 08a985a4-d878-4fa9-b2f2-60601005pdf-page:13 lines:1-61Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Sustainable improvement of crop performance requires integrative approaches that link genomic variation to phenotypic expression through intermediate molecular pathways. Here, we present Reciprocal Best Linear Unbiased Prediction (Reciprocal BLUP), a predictability-guided multi-omics framework that quantifies the cross-layer relationships among the genome, metabolome, and microbiome to enhance phenotype prediction. Using a panel of 198 soybean accessions grown under well-watered and drought conditions, we first evaluated four direction-specific prediction models (genome → microbiome, genome → metabolome, metabolome → microbiome, and microbiome → metabolome) to estimate the predictability of individual omics features. We evaluated whether subsets of features with high cross-omics predictability improved phenotype prediction. These cross-layer models identify features that play physiologically meaningful roles within multi-omics systems, enabling the prioritization of variables that capture coherent biological signals enriched with phenotype-relevant information. Consequently, metabolome features were highly predictable from microbiome data, whereas microbiome predictability from metabolomic data was weaker and more environmentally dependent, revealing an asymmetric relationship between these layers. In the subsequent phenotype prediction analysis, the model incorporating predictability-based feature selection substantially outperformed models using randomly selected features and achieved prediction accuracies comparable to those of the full-feature model. Under drought conditions, the phenotype prediction models based on metabolomic or microbiomic kernels (MetBLUP or MicroBLUP) outperformed the genomic baseline (GBLUP) for several biomass-related traits, indicating that the environment-responsive omics layers captured phenotypic variations that were not explained by additive genetic effects. Our results highlight the hierarchical interactions among genomic, metabolic, and microbial systems, with the metabolome functioning as an integrative mediator linking the genotype, environment, and microbiome composition. The Reciprocal BLUP framework provides a biologically interpretable and practical approach for integrating multi-omics data, improving phenotype prediction, and guiding omics-based feature selection in plant breeding.
Why it matches plant phenotyping methods植物形質予測のための新しい多層オミクス統合フレームワークを提案し、予測モデル比較と性能評価を行っているため、計算的フェノタイピング手法が中心である。
abstractwe present Reciprocal Best Linear Unbiased Prediction (Reciprocal BLUP), a predictability-guided multi-omics framework that quantifies the cross-layer relationships among the genome, metabolome, and microbiome to enhance phenotype prediction.
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits all source codes and data in a public GitHub repository (Yoska393/ReciprocalBLUP), which contains the authors' analysis code and data for the soybean multi-omics phenotype prediction study. The NARO Genebank URL is only the source of plant accessions, not a phCode · publicAll source codes and data are available from the repository in GitHub: https://github.com/Yoska393/ReciprocalBLUP (accessed on 20 November 2025).Open asset ↗Yoska393/ReciprocalBLUPlines:285-308Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
Abstract High‐throughput and noninvasive phenotyping methods are promising technology for improving efficiency in plant research and breeding. In this study, we evaluated the performance of a digital phenotyping system (DPS) based on three‐dimensional (3D) model reconstruction for quantifying key growth traits in rice ( Oryza sativa ). The DPS was used to estimate plant height, biomass, color, leaf morphology, and tiller angle in four rice varieties (Koshihikari, Nipponbare, PL9, and Tachiaoba). The results show high accuracy and correlation between manually measured and DPS‐derived traits. Notably, the 3D volume analysis can quantify biomass accumulation and growth dynamics and revealed distinct differences among varieties. The strong correlation between the green‐red normalized difference index (a red‐green‐blue‐based index) and soil plant analysis development also demonstrated the viability of the system in monitoring leaf color without using a multispectral instrument. The analysis also captured growth patterns over time, including canopy development and senescence, which are often challenging to quantify through manual measurements alone. Furthermore, the tiller angle estimation derived from DPS provided an alternative method to plant architecture evaluation, demonstrating its potential for use in breeding programs aimed to optimize canopy structure. These findings establish DPS as a reliable and scalable tool for a digital phenotyping platform that enables comprehensive trait analysis with reduced labor and increased precision and the capability to continuously monitor plant growth and biomass accumulation. This study shows the potential of this novel digital tool for automating manual measurements, which can increase efficiency and expedite research and breeding in rice and other crops.
Why it matches plant phenotyping methods3Dモデル再構築に基づくデジタル表現型解析システムを開発・評価し、イネの複数形質を手測定と比較検証しているため、方法が研究の中心です。
abstractwe evaluated the performance of a digital phenotyping system (DPS) based on three‐dimensional (3D) model reconstruction for quantifying key growth traits in rice
Reproduction assets foundThe paper's data availability statement explicitly says the analysis code is openly available on GitHub at the authors' repository Rice_VTGa.O, which contains the digital phenotyping/leaf-tracing analysis code for this study. No phenotype dataset or image deposit is stated.Code · publicGrant Number 39 [2023] and 38 [2024]),
and Microbiome and Metabolome Control Project, University
of Miyazaki, Japan.
C O N F L I C T O F I N T E R E S T S TAT E M E N T
The authors declare no conflicts of interest.
DATA AVA I L A B I L I T Y S TAT E M E N T
Codes used for analysis in this study are openly available on
GitHub at https://github.com/sandysan42/Rice_VTGa.O RC I D
SorawichPongpiyapaiboon https://orcid.org/0000-0002-9314-8375
Kenji Aoki https://orcid.org/0000-0001-7003-1994
MasatsuguHashiguchi https://orcid.org/0000-0003-0637-2780
RyoAkashi https://orcid.org/0000-0002-5651-8285
Yuji Kishima https://orcid.org/0000-0002-0942-3371
Hidenori Tanaka https://orcid.org/0000-0002-4237-8154Open asset ↗https://github.com/sandysan42/Rice_VTGa.O · Rice_VTGa.Opdf-raw-page:13 lines:1-84Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Precision agriculture technologies based on satellite remote sensing remain largely inaccessible to smallholder farmers in developing countries due to technical complexity, cost barriers, and infrastructure demands. This study presents the design and implementation of an open-source, web-based platform for processing Sentinel-2 Level-2A imagery tailored to the specific needs of family farming systems. The platform integrates a FastAPI backend for geospatial data processing with a Next.js frontend providing simplified tools for spectral index computation (NDVI, EVI, SAVI, NDWI, NDBI), crop classification using supervised and unsupervised machine learning, and interactive 2D/3D visualization. A laboratory module implements thirteen digital image processing techniques—including Gaussian filtering, edge detection, morphological operations, and thresholding—for educational and comparative analysis. The browser-based system eliminates installation requirements and automates key workflows such as coordinate reprojection, JP2 band extraction, and statistical evaluation. Validation using ground-truth data from coffee and soybean fields in the Brazilian Cerrado achieved classification accuracies above 85% and correlation coefficients exceeding 0.90 for biomass estimation based on NDVI-derived metrics. The platform contributes to the democratization of remote sensing technologies and enhances accessibility of precision agriculture tools for smallholder farmers.
Why it matches plant phenotyping methods植物圃場の衛星画像を処理し、NDVI等からバイオマスを推定するオープンソース基盤の設計・実装・検証が中心であり、植物形質推定ワークフローとして収録対象。
titleAn Open-Source Web Platform for Sentinel-2 Multispectral Analysis in Smallholder Agriculture: Design, Implementation and Validation
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the authors' complete source code, documentation, and example datasets for the Sentinel-2 phenotyping/analysis platform on a public GitHub repository under MIT license. Sentinel-2 imagery is from the public Copernicus browser, but that is a generic data sourceCode · publicresearch received no external funding
Institutional Review Board Statement: Not applicable. This study did not involve humans or animals.
Informed Consent Statement: Not applicable. This study did not involve humans.
Data Availability Statement: Complete source code, documentation, and example datasets are publicly available
at https://github.com/rexionmars/icev-remote-sensing under MIT license. The platform can be deployed locally
or accessed via hosted instance for testing purposes. Sentinel-2 satellite imagery used in this study was obtained
from the Copernicus Open Access Hub (https://browser.dataspace.copernicus.eu/) and is freely available.
Acknowledgments: The authors thank the iCEV IOpen asset ↗https://github.com/rexionmars/icev-remote-sensing · icev-remote-sensingpdf-layout-page:11 lines:1-70Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 6 Sept 2026
Developing crop varieties that maintain productivity under drought is essential for future food security. Here, we investigated the potential of time-resolved high-throughput phenotyping to predict harvest-related traits and identify drought-stressed plants. Six barley lines ( Hordeum vulgare ) were grown in a greenhouse environment with well-watered and drought treatments, and dynamically phenotyped using RGB, thermal infrared, chlorophyll fluorescence, and hyperspectral imaging sensors. A temporal phenomic classification model accurately distinguished between drought-treated and control plants, achieving high accuracy (classification accuracy ≥0.97) even when relying solely on predictors from the early drought response phase. Canopy temperature depression at the early stage and RGB-derived plant size estimates at the late stage emerged as key classification features. A temporal phenomic prediction model of harvest-related traits achieved particularly high mean R 2 values for total biomass dry weight (0.97) and total spike weight (0.93), with RGB plant size estimators emerging as important predictors. Importantly, prediction accuracy for these traits remained high (R 2 ≥ 0.84) even when restricted to early developmental phase data, including the stem elongation stage. Models trained on pooled drought and control data outperformed single-treatment models and maintained high predictive power across treatments. Together, these findings highlight the value of integrating high-throughput phenotyping with temporal modeling to enable earlier, more cost-effective selection of drought-resilient genotypes and demonstrate the broader potential of phenomics-driven strategies for accelerating crop improvement under stress-prone environments.
Why it matches plant phenotyping methodsRGB・熱赤外・蛍光・ハイパースペクトルによる時系列表現型取得と、収穫形質予測モデルの構築・評価が研究の中心であるため。
abstractdynamically phenotyped using RGB, thermal infrared, chlorophyll fluorescence, and hyperspectral imaging sensors
Reproduction assets foundThe authors explicitly state that the data and analysis pipeline code for this barley phenotyping study is publicly available on GitHub at https://github.com/hatiez/barley-TPP-pipeline. This is a paper-specific computational asset (the temporal phenomic classification/prediction pipeline) with an authors' public URL. DCode · publicThe data and analysis pipeline code is available on https://github.com/hatiez/barley-TPP-pipeline .Open asset ↗https://github.com/hatiez/barley-TPP-pipelinelines:390-415Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Introduction Monitoring the growth status and aboveground biomass of wild and cultivated medicinal herbs remains a persistent challenge in precision agriculture. Methods In this study, we developed machine learning and deep learning models to estimate SPAD values and biomass of Lamiophlomis rotata (Benth.). The models used hyperspectral data and time-series phenotypic traits from 508 samples collected across different altitudes. Regions of interest (ROIs) were manually defined from plant contours. The corresponding mean spectral profiles were then preprocessed. To improve feature selection, we proposed a Dynamic Reptile Search Algorithm-enhanced CARS (DRSA-CARS) method. This method integrates a dynamic behavioral strategy into the CARS framework to identify informative spectral bands. Vegetation indices (VIs) and gray-level co-occurrence matrix (GLCM)-based texture parameters were extracted and combined with spectral features to construct the PLSR, SVR, FNN, and CNN models. Results Compared to CARS, the DRSA-CARS method reduced feature dimensionality by up to 75.7% for SPAD and 29.2% for biomass, while improving prediction accuracy ( R ²) by 24.4% and 34.7%, respectively. Among all models, the FNN achieved the highest performance, with R ² values of 0.7732 (training) and 0.7502 (testing) for SPAD and 0.8260 and 0.7933 for biomass. Feature fusion further improved predictive accuracy by 11% for SPAD and 30% for biomass compared to models based on individual feature types. Discussion These results demonstrate that coupling DRSA-CARS-based feature selection with deep learning provides a robust, non-destructive approach for evaluating plant growth status. This framework highlights the potential of hyperspectral imaging as a rapid, reliable, non-invasive tool for precision cultivation of medicinal herbs.
Why it matches plant phenotyping methodsハイパースペクトル画像からSPAD値とバイオマスという植物形質を非破壊推定し、特徴選択法と深層学習モデルを開発・評価しており、フェノタイピング手法が中心である。
abstractwe developed machine learning and deep learning models to estimate SPAD values and biomass of Lamiophlomis rotata (Benth.).
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 2
Hyperparameters and settings of PLSR, SVR, FNN, and CNN models for above-ground biomass prediction.Open asset ↗lines:760-839Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Abstract Modern agriculture faces the dual challenge of sustainably increasing food production while mitigating the environmental impact of intensive monocultures. Mixed cropping, which is the cultivation of multiple species or varieties, may provide ecological benefits that address productivity and environmental sustainability challenges. However, evaluating its multifunctionality in conventional agricultural field experiments is costly and labour-intensive, and small sample sizes and high spatial variability often make it difficult to detect the statistical significance of mixed cropping effects. This study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs) to efficiently assess the multifunctionality of mixed cropping systems. We conducted a field experiment comparing monocultures of oat, rye, and barley; intraspecific mixed cropping combining three oat varieties; and interspecific mixed cropping combining oat, rye, and barley. Using UAV-derived data across the entire field, including vegetation cover, plant height, and the normalised difference vegetation index, we evaluated five multifunctionalities (biomass production, spatial variability in biomass production, early canopy closure, lodging resistance, and lodging resilience). This framework reveals that mixed cropping outperforms monocropping in several key ecological functions. The proposed UAV-based HTP approach enables cost-effective, robust, and scalable evaluation of mixed cropping systems, facilitating their optimisation for multifunctionality and contributing to the advancement of sustainable agriculture.
Why it matches plant phenotyping methodsUAV画像から植被率・草高・NDVIなどの植物形質を取得する高スループット表現型解析フレームワークを導入・検証しており、フェノタイピング手法が研究の中心です。
abstractThis study aims to introduce and validate a high-throughput field phenotyping (HTP) framework that integrates aerial imagery obtained from unmanned aerial vehicles (UAVs)
Reproduction assets foundThe preprint's data availability statement deposits the datasets generated and analysed in the study (UAV-derived phenotypic measurements and field data) on Zenodo with a DOI that appears verbatim in the allowed URL list. No author analysis code or trained models are explicitly deposited.Dataset · publicThe datasets generated and analysed during the current study are available in the Zenodo repository, https://doi.org/10.5281/zenodo.17042273.Open asset ↗Zenodo · 10.5281/zenodo.17042273lines:135-161Code / dataset availability confirmedbioRxiv · checked 15 Sept 2026
The accessibility of flying drones (Unoccupied Aerial Vehicles) presents scientists and managers with reproducible and cost-effective methods to monitor submerged aquatic vegetation. In particular, drone-borne topobathymetric LiDAR provides high-resolution (cm-scale), three-dimensional information about the geometry and structure of surveyed areas, allowing for quantification of vegetation volume in addition to bathymetry. For habitat-forming submerged and intertidal vegetation like seagrass, this information can advance research regarding the structure and patchiness of canopies in relation to biodiversity, blue carbon storage, and hydrodynamic processes. Here, we report how drone-borne LiDAR can be used to estimate the habitat volume of eelgrass (Zostera marina) within a sheltered bay in south-eastern Norway. After classifying LiDAR points using a Random Forest model, we created a Digital Terrain Model of the sea floor and a Digital Surface Model of the eelgrass canopy. From these models, we estimated eelgrass canopy volume to range between 862 and 1099 m3 across the small study area. From the volume, we estimated above-ground carbon storage in living eelgrass tissue to range between 96 and 122 kg. To our knowledge, this is the first study to utilise drone-borne LiDAR to quantify the volume and carbon-storage potential of a marine habitat-forming species like eelgrass, thereby demonstrating the potential of drone-borne LiDAR as an efficient tool to provide reproducible and high-resolution data for submerged aquatic habitats, including seagrass meadows.
Why it matches plant phenotyping methodsドローン搭載LiDARを用いて eelgrass のキャノピー体積という植物形態形質を推定する方法が研究の中心であり、分類、地形・表面モデル作成、再現可能な高解像度測定手法として記述されているため。
abstractHere, we report how drone-borne LiDAR can be used to estimate the habitat volume of eelgrass (Zostera marina) within a sheltered bay in south-eastern Norway.
Reproduction assets foundThe paper's R analysis code (point cloud cleaning, Random Forest classification, DTM/DSM/canopy height and biomass/carbon computations) is publicly available on the corresponding author's GitHub repository. The underlying LiDAR/field data are only available upon request, so no public data asset qualifies.Code · publicPre-print 15
Code for the present analysis is available at the corresponding author’s GitHub
585
(https://github.com/charles-patrick-lavin/NIVA-SeaBee-LiDAR), while the data
586
analysed are available upon request.
587
Acknowledgements
588
This work was funded by the Research Council of Norway and is a product of SeaBee
589
(Norwegian Infrastructure for drone- based research, mapping and monitoring in the
590
coastal zone, RCN project ID #296478). Additional funding was received frOpen asset ↗charles-patrick-lavin/NIVA-SeaBee-LiDARpdf-raw-page:15 lines:1-32Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Continuous and accurate biomass measurement is a critical enabler for control, decision making, and optimization in modern plant production systems. It supports the development of plant growth models for advanced control strategies like model predictive control, and enables responsive, data-driven, and plant state-dependent cultivation. Traditional biomass measurement methods, such as destructive sampling, are time-consuming and unsuitable for high-frequency monitoring. In contrast, image-based estimation using computer vision and deep learning requires frequent retraining and is sensitive to changes in lighting or plant morphology. This work introduces a low-cost, load-cell-based biomass monitoring system tailored for vertical farming applications. The system operates at the level of individual growing trays, offering a valuable middle ground between impractical plant-level sensing and overly coarse rack-level measurements. Tray-level data allow localized control actions, such as adjusting light spectrum and intensity per tray, thereby enhancing the utility of controllable LED systems. This granularity supports layer-specific optimization and anomaly detection, which are not feasible with rack-level feedback. The biomass sensor is easily scalable and can be retrofitted, addressing common challenges such as mechanical noise and thermal drift. It offers a practical and robust solution for biomass monitoring in dynamic, growing environments, enabling finer control and smarter decision making in both commercial and research-oriented vertical farming systems. The developed sensor was tested and validated against manual harvest data, demonstrating high agreement with actual plant biomass and confirming its suitability for integration into vertical farming systems.
Why it matches plant phenotyping methods植物バイオマスを連続測定する低コストのロードセル式センサーシステムを開発し、手動収穫データで検証しており、植物フェノタイピング手法が中心である。
abstractThis work introduces a low-cost, load-cell-based biomass monitoring system tailored for vertical farming applications.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe following supporting information can be downloaded at https://www.mdpi.com/article/10.3390/s25154770/s1 , Data: sensor data test experiment; Data: sensor data validation experiment.Open asset ↗lines:115-311Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Residual dry matter (RDM) is a term used in rangeland management to describe the non-photosynthetic plant material left on the soil surface at the end of the growing season. RDM measurements are used by agencies and conservation entities for managing grazing and fire fuels. Measuring the RDM using traditional methods is labor-intensive, costly, and subjective, making consistent sampling challenging. Previous studies have assessed the use of multispectral remote sensing to estimate the RDM, but with limited success across space and time. The existing approaches may be improved through the use of spectroscopic (hyperspectral) sensors, capable of capturing the cellulose and lignin present in dry grass, as well as Unmanned Aerial Vehicle (UAV)-mounted Light Detection and Ranging (LiDAR) sensors, capable of capturing centimeter-scale 3D vegetation structures. Here, we evaluate the relationships between the RDM and spectral and LiDAR data across the Jack and Laura Dangermond Preserve (Santa Barbara County, CA, USA), which uses grazing and prescribed fire for rangeland management. The spectral indices did not correlate with the RDM (R2
Why it matches plant phenotyping methodsUAV LiDARとフィールド分光法を用いて、植生残渣量（RDM）という植物状態を推定するセンサー手法の評価が研究の中心であり、単なる農業実験での routine measurement ではない。
titleEvaluating UAV LiDAR and Field Spectroscopy for Estimating Residual Dry Matter Across Conservation Grazing Lands
Reproduction assets foundThe paper's UAV LiDAR data (used to derive canopy height models for RDM estimation) is explicitly stated to be publicly available in the OpenTopography Community Dataspace. The KNB deposit containing RDM weights, field spectra, and analysis data is also mentioned, but its DOI URL is not among the allowed URLs, so only Dataset · publicAll the LiDAR data used in this study are publicly available in the
Open Topography Community Dataspace: https://doi.org/10.5069/G9S180QVOpen asset ↗10.5069/G9S180QVpdf-page:17 lines:1-33Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Nitrogen (N) is essential for plant growth, yet excessive fertilizer use contributes to environmental degradation. Actinorhizal trees like Alnus glutinosa form symbiotic relationships with nitrogen-fixing bacteria of the genus Frankia, reducing reliance on synthetic fertilizers. However, distinguishing between soil-derived and symbiotically fixed nitrogen remains a challenge. This study investigates the potential of NIR spectroscopy as a nondestructive tool for differentiating N sources in A. glutinosa . Seedlings were grown in sterilized soil under controlled conditions with and without Frankia inoculation, and across a gradient of NH 4 NO 3 fertilization (0-20 mM). We measured leaf chlorophyll, nitrogen content, biomass, and NIR reflectance (330-1100 nm) of the third fully expanded leaf. principal component analysis (PCA) and partial least squares (PLS) regression revealed that spectral signatures significantly differed between inoculated and uninoculated plants, particularly in the visible range around 555 nm. Despite similar leaf chlorophyll levels, Frankia -inoculated plants and those fertilized with 20 mM NH 4 NO 3 exhibited spectral differences that could otherwise not be detected by SPAD measurements. PLS regression explained up to 54.8% of spectral variance based on nitrogen source, even in the absence of unique spectral peaks. These findings highlight the potential of NIR spectroscopy for rapid, in vivo and in vitro assessment of symbiotic N-fixation in trees, offering a novel and more precise approach than SPAD measurements.
Why it matches plant phenotyping methodsNIR分光とPLS回帰を用いて植物の共生的窒素固定状態・窒素源を非破壊推定する方法が研究の中心であり、SPADとの比較も行っている。
abstractThese findings highlight the potential of NIR spectroscopy for rapid, in vivo and in vitro assessment of symbiotic N-fixation in trees, offering a novel and more precise approach than SPAD measurements.
Reproduction assets foundThe paper's Data Availability Statement deposits the study's data (NIR spectra and plant phenotyping measurements) on Zenodo with an explicit public DOI, which is an allowed URL. No author analysis code repository is stated; the other allowed URLs are generic R package documentation.Dataset · publicData Availability Statement
The data is deposited in Zenodo under (DOI): https://doi.org/10.5281/zenodo.15533926 .Open asset ↗Zenodo · 10.5281/zenodo.15533926lines:126-163Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
The aboveground biomass (AGB) of crops is an essential metric for monitoring crop growth, making timely and accurate AGB forecasting critical for effective agricultural management. The introduction of Unmanned Aerial Vehicles (UAVs) and advanced sensor technologies has revolutionized traditional AGB prediction techniques. Currently, machine learning (ML) combined with UAV data are commonly utilized, along with the Vegetation Index Weighted Canopy Volume Model (CVM VI ) for AGB prediction. Nevertheless, there is limited investigation into how these methods perform across different agricultural conditions. This study aims to fill this gap by creating specific methodologies for estimating corn AGB under diverse fertilization and irrigation treatments. We utilized LiDAR, multispectral (MS), thermal infrared (TIR), along with measured AGB and Leaf Area Index (LAI) data from various growth stages to develop a stacking ensemble learning model. This model effectively integrates data from multiple sources, resulting in a strong prediction performance with R 2 of 0.86, Mean Absolute Error (MAE) of 1.54 t/ha, and Root Mean Square Error (RMSE) of 2.06 t/ha. Meanwhile, the analysis of the accuracy of CVM VI revealed its efficacy during the early-stage when corn is short, with its predictive capability diminishing as AGB increases. Consequently, we recommend the CVM VI for early-stage AGB prediction, which can streamline data collection and computational efforts. In contrast, the ML approach, which benefits from data fusion, is more appropriate for predicting AGB during the mid to late growth stages. This study enhances AGB prediction accuracy and speed, providing critical understanding of regional AGB dynamics and supporting better agricultural decision-making.
Why it matches plant phenotyping methodsUAVのLiDAR・マルチスペクトル・熱赤外データを統合し、トウモロコシの地上部バイオマスを推定するモデルを開発・比較・評価しており、植物形質取得手法が中心である。
abstractThis study aims to fill this gap by creating specific methodologies for estimating corn AGB under diverse fertilization and irrigation treatments.
Reproduction assets foundThe paper's Data Availability statement explicitly deposits authors' model training code and test data at a public GitHub repository, which qualifies as a paper-specific public code asset for the AGB prediction analysis.Code · publicCode and test data for model training are available at https://github.com/Joker1xuan/model_training .Open asset ↗Joker1xuan/model_traininglines:323-356Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Unmanned aerial vehicle (UAV)-based multispectral imaging is one of the most widely used technologies for rapid crop monitoring, essential for crop-growth management. However, the technology's complex optical structure and difficulty in interpreting real-time crop-growth information seriously restrict its application. This paper presents a newly designed UAV-based snapshot multispectral imaging crop-growth sensor (SMICGS) aimed at simplifying the optical structure and realizing the online interpretation of crop spectral information. Mosaic filters based on the special spectral characteristics of crops were designed to achieve multiband co-optical imaging. A spectral crosstalk correction method based on the pixel response characteristics of SMICGS was proposed, and a processing system based on the coupling of sensor information and crop-growth monitoring models was developed to realize real-time online processing of crop spectral information. Field experiments showed that the vegetation indices obtained by SMICGS combined with the machine learning algorithm random forest (RF) achieved better results in predicting leaf area index (LAI) and above-ground biomass (AGB) for wheat and rice. For wheat, the R 2 and root mean square error (RMSE) values for the LAI and AGB prediction models were 0.81 and 0.85, and 0.682 and 1.127 t/ha, respectively. For rice, the R 2 and RMSE values for the LAI and AGB prediction models were 0.89 and 0.93, and 0.818 and 0.866 t/ha, respectively. Overall, SMICGS provides a reliable foundational tool for real-time, non-destructive monitoring of field crop growth information, offering significant potential for the precise management of agricultural production.
Why it matches plant phenotyping methods作物生育情報を定量化するUAVマルチスペクトルセンサー、補正法、処理システムを開発し、LAIと地上部バイオマス推定を検証しており、植物フェノタイピング手法が中心である。
abstractThis paper presents a newly designed UAV-based snapshot multispectral imaging crop-growth sensor (SMICGS)
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe figures, tables and data mentioned in the article can be downloaded from https://github.com/ikjkj2/Plant-Phenomics .Open asset ↗ikjkj2/Plant-Phenomicslines:395-413Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Image analysis can be useful for assessing crop health and predicting yield. Instead of expensive equipment, smartphones are considered an accessible and low-cost alternative. The objectives of this study were to evaluate whether fresh weight in green and red lettuce could be predicted by leaf color (intensity of green color measured by RGB) under different fertilizer treatments using RGB imaging from two widely used smartphone models (Samsung Galaxy and Apple iPhone). The two smartphones showed similar longitudinal patterns of RGB data (the intensity and dark green proportion), but the absolute difference in the RGB data was significantly different. Therefore, the averaged results were used for the analyses. Color intensity and dark green proportion were associated with the fresh lettuce weight (p = 0.005, 0.003, 0.014 and p < 0.001, respectively). This study suggests that farmers and practitioners can use these economic devices as a non-destructive method to diagnose and monitor the nutritional status and predict lettuce yield.
Why it matches plant phenotyping methodsスマートフォンRGB画像から葉色を抽出し、レタスの生体重・栄養状態を非破壊推定する手法が研究の中心であり、植物表現型取得への実質的な応用に該当する。
abstractsmartphones are considered an accessible and low-cost alternative
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe separated GIF files were uploaded to the image analysis program freely available at http://mkwak.org/imgarea .Open asset ↗lines:321-349Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
RootVisualization / data managementBiomass / plant weightRoot system architecture
Tropical ecosystems contain the world's largest biodiversity of vascular plants. Yet, our understanding of tropical functional diversity and its contribution to global diversity patterns is constrained by data availability. This discrepancy underscores an urgent need to bridge data gaps by incorporating comprehensive tropical root data into global datasets. Here, we provide a database of tropical root characteristics. This new database, TropiRoot 1.0, will be instrumental in evaluating an array of hypotheses pertaining to root functional ecology and plant biogeography, both within the tropics and relative to other global biomes. The data compilation was conducted by the TropiRoot Initiative, in partnership with the Fine-Root Ecology Database (FRED) and the Global Root Trait (GRooT) database, Colorado State University (CSU) and the Smithsonian Tropical Research Institute (STRI). Literature search and data extraction were conducted between 2020 and 2024. Literature was identified using Web of Science, Scopus, and complemented using the expert knowledge of members of TropiRoot. To provide broad environmental and geographical distributions, literature searches included root characteristics (traits) across global change drivers, natural gradients, and from different continents. We adopted FRED standardized data columns and streamlined the format to enhance accessibility for data extraction across various user groups. This optimized framework resulted in a smaller, yet comprehensive datasheet. To make the database compatible with other global root trait initiatives, column identification was standardized following the codes provided by FRED. These efforts culminated in data extracted from 104 new sources, resulting in more than 8000 rows of data (either species or community data). Most of the data in TropiRoot 1.0 include root characteristics such as root biomass, morphology, root dynamics, mass fraction, architecture, anatomy, physiology, and root chemistry. This initiative represents a 30% increase in the currently available data for tropical roots in FRED. TropiRoot 1.0 contains root characteristics from 25 different countries, where seven are located in Asia, six in South America, five in Central America and the Caribbean, four in Africa, two in North America, and 1 in Oceania. Due to the volume of data, when ancillary data were available, including soil data, these data were either extracted and included in the database or its availability was recorded in an additional column. Multiple contributors checked the entries for outliers during the collation process to ensure data quality. For text-based observations, we examined all cells to ensure that their content relates to their specific categories. For numerical observations, we ordered each numerical value from least to greatest and plotted the values, checking apparent outliers against the data in their respective sources and correcting or removing incorrect or impossible values. Some data (soil and aboveground) have different columns for the same variable presented in different units, including originally published units, but root characteristics data had units converted to match those reported in FRED. By filling a gap from global databases, TropiRoot 1.0 expands our knowledge of otherwise so far underrepresented regions and our ability to assess global trends. This advancement can be used to improve tropical forest representation in vegetation models. The data are freely available and should be cited when used.
Why it matches plant phenotyping methods熱帯植物の根形態・構造・生理などの表現型特性を標準化して収録した再利用可能なデータベースであり、データセット構築と品質管理が中心です。
abstractHere, we provide a database of tropical root characteristics.
Reproduction assets foundThe paper's core asset is the TropiRoot 1.0 root trait database itself, publicly deposited in ESS-DIVE (DOI 10.15485/2507279) and also provided as Supporting Information (Data S1). This is a paper-specific public phenotype/trait dataset directly reproducing the paper's measurements.Dataset · publich, et al. 2025. “
TropiRoot 1.0: Database of Tropical Root Characteristics across Environments.” Ecology
106(5): e70074. 10.1002/ecy.70074
Handling Editor: Simona Picardi
DATA AVAILABILITY STATEMENT
The dataset is available as Supporting Information to this Ecology data paper and is also accessible in the ESS‐DIVE repository at https://doi.org/10.15485/2507279.
Associated Data
Supplementary Materials
Data S1.
Data Availability Statement
The dataset is available as Supporting Information to this Ecology data paper and is also accessible in the ESS‐DIVE repository at https://doi.org/10.15485/2507279.Open asset ↗10.15485/2507279html-lines:63-80Code / dataset availability confirmedOpenAlex · Europe PMC · checked 13 Sept 2026
Community-based forest restoration has the potential to sequester large amounts of atmospheric carbon, avoid forest degradation, and support sustainable development. However, if partnered with international funders, such projects often require robust and transparent aboveground carbon measurements to secure payments, and current monitoring approaches are not necessarily appropriate due to costs, scale, and complexity. The use of consumer-grade drones in combination with open source structure-from-motion photogrammetry may provide a solution. In this study, we tested the suitability of a simplified drone-based method for measuring aboveground carbon density in heavily degraded tropical forests at a 2 ha restoration site in Sabah, Malaysia, comparing our results against established field-based methods. We used structure-from-motion photogrammetry to generate canopy height models from drone imagery, and applied multiple pre-published plot-aggregate allometric equations to examine the importance of utilising regionally calibrated allometric equations. Our results suggest that this simplified method can produce aboveground carbon density measurements of a similar magnitude to field-based methods, quickly and only with a single input metric. However, there are greater levels of uncertainty in carbon density measurements due to errors associated with canopy height measurements from drones. Our findings also highlight the importance of selecting regionally calibrated allometric equations for this approach. At scales between 1 and 100 ha, drone-based methods provide an appealing option for data acquisition and carbon measurement, balancing trade-offs between accuracy, simplicity, and cost effectiveness and coinciding well with the needs of community-scale aboveground carbon measurement. Of importance, we also discuss considerations relating to the accessibility of this method for community use, beyond purchasing a drone, that must not be overlooked. Nevertheless, the method presented here lays the foundations for a simple workflow for measuring aboveground carbon density at a community scale that can be refined in future studies.
Why it matches plant phenotyping methodsドローン画像とSfMから森林キャノピー高モデルを生成し、地上部炭素密度を推定する測定ワークフローを開発・検証しており、植物群落の形態・状態の取得が研究の中心である。
abstractWe used structure-from-motion photogrammetry to generate canopy height models from drone imagery
Reproduction assets foundThe authors state that all drone images and field data underlying this study's aboveground carbon density measurements are publicly available in the CEDA Archive with a catalogue record and DOI. This is a paper-specific, public, directly actionable dataset. Other URLs (OpenDroneMap, LAStools, QGIS, PyCrown) are genericDataset · publicAll drone images and field data are publicly available from the CEDA Archive, a NERC repository for earth observation data. The dataset can be accessed via the following catalogue record link: https://catalogue.ceda.ac.uk/uuid/98692ec457ee431cacc4027820e46411/ (DOI: https://doi.org/10.5285/98692ec457ee431cacc4027820e46411 ).Open asset ↗CEDA Archive · 10.5285/98692ec457ee431cacc4027820e46411lines:151-177Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Controlling forage quality and grazing are crucial for sustainable livestock production, health, productivity, and animal performance. However, the limited availability of reliable handheld sensors for timely pasture quality prediction hinders farmers’ ability to make informed decisions. This study investigates the in-field dynamics of Mombasa grass (Megathyrsus maximus) forage biomass production and quality using optical techniques such as visible imaging and near-infrared (VIS-NIR) hyperspectral proximal sensing combined with machine learning models enhanced by covariance-based error reduction strategies. Data collection was conducted using a cellphone camera and a handheld VIS-NIR spectrometer. Feature extraction to build the dataset involved image segmentation, performed using the Mahalanobis distance algorithm, as well as spectral processing to calculate multiple vegetation indices. Machine learning models, including linear regression, LASSO, Ridge, ElasticNet, k-nearest neighbors, and decision tree algorithms, were employed for predictive analysis, achieving high accuracy with R2 values ranging from 0.938 to 0.998 in predicting biomass and quality traits. A strategy to achieve high performance was implemented by using four spectral captures and computing the reflectance covariance at NIR wavelengths, accounting for the three-dimensional characteristics of the forage. These findings are expected to advance the development of AI-based tools and handheld sensors particularly suited for silvopastoral systems.
Why it matches plant phenotyping methods画像・VIS-NIRセンシング、画像セグメンテーション、特徴抽出、機械学習による牧草バイオマスおよび品質形質の推定が研究の中心であり、植物フェノタイピング手法の開発・応用に該当する。
abstractThis study investigates the in-field dynamics of Mombasa grass (Megathyrsus maximus) forage biomass production and quality using optical techniques such as visible imaging and near-infrared (VIS-NIR) hyperspectral proximal sensing combined with machine learning models enhanced by covariance-based error reduction strategies.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicSupplementary Materials: The following supporting information can be downloaded at: https://
www.mdpi.com/article/10.3390/agriengineering7040111/s1. Database S1: Database of experiment.Open asset ↗Database S1pdf-page:27 lines:1-54Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Leaf rust and yellow rust are globally significant fungal diseases that severely impact wheat production, causing yield losses of up to 60% in highly susceptible cultivars. Early and accurate detection is crucial for integrating precision crop protection strategies to mitigate these losses. This study investigates the potential of 3D LiDAR technology for monitoring rust-induced physiological changes in wheat by analyzing variations in plant height, biomass, and light reflectance intensity. Results showed that grain yield decreased by 10–50% depending on cultivar susceptibility, with the durum wheat cultivar ‘Kiko Nick’ and bread wheat ‘Califa’ exhibiting the most severe reductions (~50–60%). While plant height and biomass remained relatively unaffected, LiDAR-derived intensity values strongly correlated with disease severity (R2 = 0.62–0.81, depending on the cultivar and infection stage). These findings demonstrate that LiDAR can serve as a non-destructive, high-throughput tool for early rust detection and biomass estimation, highlighting its potential for integration into precision agriculture workflows to enhance disease monitoring and improve wheat yield forecasting. To promote transparency and reproducibility, the dataset used in this study is openly available on Zenodo, and all processing code is accessible via GitHub, cited at the end of this manuscript.
Why it matches plant phenotyping methodsLiDARによる小麦の病害状態・バイオマス等の非破壊推定を中心に評価しており、植物フェノタイピング手法の実質的な適用・検証に該当する。
abstractThis study investigates the potential of 3D LiDAR technology for monitoring rust-induced physiological changes in wheat by analyzing variations in plant height, biomass, and light reflectance intensity.
Reproduction assets foundThe paper's LiDAR-derived wheat rust phenotyping dataset is openly available on Zenodo (DOI 10.5281/zenodo.14889285), and the authors' point-cloud processing and parameter-extraction code is publicly available on GitHub (eapolo/agrolidarwheatrust). Both are explicitly stated in the Data Availability Statement.Dataset · publicData Availability Statement: The dataset used in this study has been published on the Zenodo
platform under the DOI: https://doi.org/10.5281/zenodo.14889285Open asset ↗Zenodo · 10.5281/zenodo.14889285pdf-page:21 lines:1-60Code · publicalong with the code, which is
available in the GitHub repository at https://github.com/eapolo/agrolidarwheatrust, accessed on
10 March 2025.Open asset ↗github.com/eapolo/agrolidarwheatrustpdf-page:21 lines:1-60Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Large-scale mapping of fuel load and fuel vertical distribution is essential for assessing fire danger, setting strategic goals and actions, and determining long-term resource needs. The Airborne LiDAR system can fulfil such goal by accurately capturing the three-dimensional arrangement of vegetation at regional and national scales. We developed a novel method to estimate multiple metrics of fuel load and vertical bulk density distribution for any type of vegetation. The approach uses Beer-Lambert law for inverting the ALS point cloud into vertical plant area density profiles, which are converted into vertical bulk density distribution profiles using species-specific plant traits. The approach is evaluated by comparing ALS-based vegetation profiles and fuel metrics with field-based data from southeastern France, Spain, and Portugal for a range of vegetation types. ALS-based and field-based vertical vegetation profiles were consistent. The range of values of fuel load metrics was also consistent with field data. Good correlations and low bias were attained for simple stratified structure with R² of 0.6, 0.42 and 0.68 and bias of -5 %, -2 % and -3.3 % for canopy base height, canopy fuel load, and canopy bulk density respectively. However, correlations were low for complex vertical structures. The use of species-specific plant traits appeared relevant by lowering the deviation between field and ALS-based values for most species. Our field-independent fuel metric estimation shows comparable performance to results in the literature based on classification approaches trained on field metrics, highlighting the generality of our direct approach. We demonstrated how our approach is more relevant than field data for defining vertical vegetation strata in complex forest structures. We showed an application of the methods by mapping multiple metrics at regional scale (6343 km²) such as canopy base height, fuel strata gap, and canopy and understory fuel loads. Our approach is adequate for feeding next generation models of wildfire risk assessment systems, enhanced by more flexible and accurate fuel data than the existing fuel typologies.
Why it matches plant phenotyping methods航空LiDAR点群から植生の垂直構造、燃料負荷、バルク密度などの植物・キャノピー形質を推定する手法を開発し、野外データで評価して地域適用しているため、植物フェノタイピング手法が中心である。
abstractWe developed a novel method to estimate multiple metrics of fuel load and vertical bulk density distribution for any type of vegetation.
Reproduction assets foundThe paper's ALS fuel-metric processing workflow is implemented in the authors' R package LidarForFuel, explicitly stated as developed for this study and publicly available on GitHub with a Zenodo DOI. No separate public field-plot or LiDAR dataset deposit by the authors is stated in the supplied blocks (LiDAR sources,eCode · publicL, rCBD, rCMFL) so that
the effects of threshold are comparable between plots with different metric values. Each profile type (Fig. 3) based on a 10 % bulk density threshold is shown
separately (color scale).
Data availability
The package LidarForFuel developed in the context of this study is
available on the github repository: https://github.com/oliviermartin7/LidarForFuel. DOI: 10.5281/zenodo.14261023.
References
Abdollahi, A., Yebra, M., 2023. Forest fuel type classification: review of remote sensing
techniques, constraints and future trends. J. Environ. Manage. 342, 118315. https://
doi.org/10.1016/j.jenvman.2023.118315.
Alexander, M.E., Cruz, M.G., 2013. Limitations on the accuracy of mOpen asset ↗oliviermartin7/LidarForFuel · 10.5281/zenodo.14261023pdf-raw-page:17 lines:1-46Code / dataset availability confirmedCrossref · checked 6 Sept 2026
Abstract Monitoring plant growth is crucial for effective crop management, and using color and depth (RGBD) cameras to model lettuce has emerged as one of the most convenient and non-invasive methods. In recent years, deep learning techniques, particularly neural networks, have become popular for estimating lettuce fresh weight. However, these models are typically specific to particular datasets, lack domain adaptation, and are often limited by the availability of open-access datasets. In this study, we propose a method based on plant geometric features for estimating the rosette structure and volume of lettuce. This new approach was compared to existing methods that reconstruct surfaces from point clouds, such as Ball Pivoting and Alpha Shapes. The proposed method creates a tight hull around the plant's point cloud, preserving high detail of the rosette structure while filling in surface holes in areas not visible to 3D cameras. Using a linear regression model, we estimated fresh weight for this dataset, achieving a root mean square error (RMSE) of 18.2 g when using only the estimated plant volume, and 17.3 g when both volume and geometric features were included. Additionally, we introduced new geometric features that characterize leaf density, which could be useful for breeding applications. A dataset of 402 point clouds of lettuce plants, captured before harvest, was compiled using one top-down and three side-view 3D cameras.
Why it matches plant phenotyping methodsRGB-D画像からレタスの構造・体積・葉密度を抽出し、生体重推定を検証する手法開発が研究の中心であり、データセットも構築している。
abstractIn this study, we propose a method based on plant geometric features for estimating the rosette structure and volume of lettuce.
Reproduction assets foundThe paper's own lettuce 3D point cloud dataset (Pii, 402 point clouds with fresh weight references) is deposited on Zenodo, and the vacuum-package surface reconstruction code plus data processing scripts are publicly available on the authors' GitHub repository. Both are paper-specific, public, and actionable.Dataset · publicData used in this study and developed models are available on Zenodo storage service https://zenodo.org/records/8410252 .Open asset ↗Zenodo · 8410252lines:158-220Code · publicThe code used at this study is available at https://github.com/VicB18/LettuceFW (accessed on 1 November 2024).Open asset ↗GitHub · VicB18/LettuceFWlines:158-220Code · publicThe code for the vacuum package method, along with the data processing scripts used in this study, are available in the Supplementary Information.Open asset ↗lines:98-114Code / dataset availability confirmedOpenAlex · Crossref · checked 14 Sept 2026
Abstract Mungbean is an important sub‐tropical legume crop grown across Asia, Africa, and Australia. Yield improvement is crucial for expanding production, but phenotyping important traits across diverse environments using current approaches is challenging, limiting the scale and complexity of information captured. High‐throughput phenotyping platforms offer a solution by rapidly screening traits at scale. This study deploys an unmanned aerial vehicle (UAV) platform to determine the potential of phenotyping a range of agronomic and physiological traits within a diverse mungbean population evaluated across three field trials. Three predictive data‐driven modeling approaches were undertaken to evaluate performance accuracy in predicting these traits: linear regression, stepwise regression, and partial least squares regression. Results show that using the geometric trait “coverage” as a proxy is most suitable for screening visual traits like early vigor. For functional traits (i.e., aboveground biomass), predictive data‐driven models demonstrate high accuracy during early‐ and mid‐canopy development stages ( R 2 0.79, root mean square error [RMSE] 4.08 and R 2 0.8, RMSE 26.92, respectively), but accuracy declines in late‐canopy development ( R 2 0.33 and RMSE 43.15). Prediction accuracy can be optimized by using different modeling approaches at different stages during the transition from early‐ to mid‐canopy development as well as canopy closure. Similar findings were observed when examining the prediction models for the physiological trait, stomatal conductance ( R 2 0.69 and RMSE 0.10). These approaches are expected to enable breeders and researchers to incorporate UAV‐based phenotyping systems into mungbean improvement programs. Such approaches might be most efficiently used at scale if applied as part of a “real‐time” calibration approach.
Why it matches plant phenotyping methodsUAVプラットフォームと予測モデルにより、マングビーンの農業・生理形質を推定し、精度を評価することが研究の中心である。
abstractThis study deploys an unmanned aerial vehicle (UAV) platform to determine the potential of phenotyping a range of agronomic and physiological traits within a diverse mungbean population evaluated across three field trials.
Reproduction assets foundThe article's Data Availability Statement points to a public UQ eSpace deposit (DOI 10.48610/20cffed.O) containing the paper's UAV phenotyping dataset. No author analysis code or trained model checkpoints are explicitly deposited; the Supporting Information is only generically referenced.Dataset · publicy The University of
Queensland, as part of the Wiley - The University of Queens-
land agreement via the Council of Australian University
Librarians.
C O N F L I C T O F I N T E R E S T S TAT E M E N T
The authors declare no conflicts of interest.
DATA AVA I L A B I L I T Y S TAT E M E N T
This dataset is available at UQ eSpace: https://doi.org/10.48610/20cffed.O RC I D
ShaniceVanHaeften https://orcid.org/0000-0003-0412-3457
Daniel Smith https://orcid.org/0000-0002-5867-9613
HannahRobinson https://orcid.org/0000-0002-8303-8076
CaitlinDudley https://orcid.org/0000-0001-5297-7487
YichenKang https://orcid.org/0000-0002-3613-7426
LeeT. Hickey https://orcid.org/0000-0001-6909-7101
Andries PoOpen asset ↗UQ eSpace · 10.48610/20cffed.Opdf-raw-page:15 lines:1-87Code / dataset availability confirmedOpenAlex · checked 6 Sept 2026
Dissecting the drought resistance (DR) mechanism and designing drought-resistant rice varieties are promising strategies to address the challenge of climate change. Here, we selected a typical drought-avoidant (DA) variety IRAT109 and drought-tolerant (DT) variety Hanhui15 as the parents to develop a stable recombinant inbred line (RIL) population (F 8 , 1,262 lines). The de novo assembled genomes of both parents were released. Through re-sequencing of the RIL population, a set of 1,189,216 reliable SNPs were obtained and used for constructing a dense genetic map. Using both aboveground and underground phenomic platforms and multimodal cameras, we captured 139,040 image-based traits (i-traits) of whole plant’s phenotypes in response to drought stress throughout entire rice growth period and identified 32,586 drought-responsive quantitative trait loci (QTLs) including 2,097 unique QTLs. The QTLs related to panicle i-traits occurred on the middle of chromosome 8 over 600 times, while the QTLs related to leaf i-traits on the 5’ end of chromosome 3 over 800 times, indicating potential effect of these QTLs on plant phenotypes. We chose three candidate genes ( OsMADS50, OsGhd8, OsSAUR11 ) related to leaf, panicle, and root traits respectively and verified their functions in resisting drought. Gene OsMADS50 was found to negatively regulate DR by modulating leaf dehydration, grain size, and root downward growth. Furthermore, a total of 18 and 21 composite QTLs significantly related to grain weight and plant biomass were screened from 597 lines in RIL population under drought conditions in field experiments, and composite QTL region was highly overlapped (76.9%) with known DR gene region. Based on three candidate DR genes, we proposed the haplotype design suitable for different environments and breeding objectives. This study provides a valuable reference for multi-modal and time-series phenomic analyses, deciphers the genetic mechanism of DA and DT rice varieties, and offers a molecular navigation map for breeding DR variety.
Why it matches plant phenotyping methods地下・地上フェノミックプラットフォームとマルチモーダルカメラで全生育期間の画像形質を大量取得しており、フェノタイピング手法の適用と技術的ワークフローが研究の中核です。
abstractUsing both aboveground and underground phenomic platforms and multimodal cameras, we captured 139,040 image-based traits (i-traits) of whole plant’s phenotypes in response to drought stress throughout entire rice growth period
Reproduction assets foundThe paper's phenome data (aboveground and belowground rice images/i-traits) and the authors' data-handling code and deep-learning model are explicitly deposited at public URLs listed in the Data Availability Statement. Genome data (riceome.hzau.edu.cn) is molecular omics and excluded.Code · publicAll the phenome data and core data-handling code have been deposited online.Open asset ↗lines:140-175Code / dataset availability confirmedCrossref · OpenAlex · checked 15 Sept 2026
Cover crops (CC) immobilize mineral soil N in their biomass, preventing N losses during crop rotation intervals. As the CC biomass is incorporated into the soil and decomposes, N is released for the following main crop. The efficiency of CC N uptake and release depends on CC quantity and quality, which can be enhanced in mixtures. Traditional N uptake measurements are labour-intensive and limited in capturing spatial variability. We calibrated relationships between traditional measurements and multispectral data from an Unmanned Aerial Vehicle (UAV) to quantify CC traits with minimal disturbance and high spatial resolution in both monocultures and mixtures. This innovative approach combined vegetation indices, textural features, and a photogrammetry-derived canopy surface model to predict CC traits. Linear models were trained for biomass, N uptake, and C:N predictions, while a K-Nearest-Neighbour model was trained for N concentration. When evaluated on the test set, the calibrated remote sensing models accurately predicted CC aboveground biomass (R 2 : 0.71, RMSE: 287.1 kg/ha, NRMSE: 11.74 %), N concentration (R 2 : 0.80, RMSE: 1.77 gN /kg, NRMSE: 6.96 %), N uptake (R 2 : 0.56, RMSE: 9.38 kgN /ha, NRMSE: 15.08 %), and C:N ratio (R 2 : 0.62, RMSE: 1.86, NRMSE: 10.98 %). The field experiment included monocultures, bi-, and tri-species mixtures of common vetch ( Vicia sativa ), black oat ( Avena strigosa ), and fodder radish ( Raphanus sativus ). N uptake was similar between treatments, yet the CC species differed in strategies, producing high biomass with low N concentration or vice versa. This study provides a basis for spatially predicting key CC traits using UAV optical data.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像、テクスチャ特徴、フォトグラメトリ由来モデルを用いて、植物のバイオマス、窒素濃度、窒素吸収量、C:N比を推定する手法を開発・検証しており、表現型取得が研究の中心である。
abstractWe calibrated relationships between traditional measurements and multispectral data from an Unmanned Aerial Vehicle (UAV) to quantify CC traits with minimal disturbance and high spatial resolution in both monocultures and mixtures.
Reproduction assets foundThe paper's Data availability statement explicitly states the authors' R code for image processing, model training, and figure production is publicly available on the authors' WUR GitLab repository (uav4covercroptraits). No phenotype dataset or image deposit is stated separately.Code · publictal for the
UAV data acquisition.
Supplementary materials
Supplementary material associated with this article can be found, in
the online version, at doi:10.1016/j.atech.2024.100608.
Data availability
The R code generated during this study to process the images, train
the models and produce the figures, is publicly available at https://git.wur.nl/dall002/uav4covercroptraits.References
[1] C. Aita, S.J. Giacomini, Crop residue decomposition and nitrogen release in singleOpen asset ↗git.wur.nl/dall002/uav4covercroptraitspdf-raw-page:10 lines:1-89Code / dataset availability confirmedOpenAlex · Europe PMC · checked 7 Sept 2026
Effective lettuce cultivation requires precise monitoring of growth characteristics, quality assessment, and optimal harvest timing. In a recent study, a deep learning model based on multimodal data fusion was developed to estimate lettuce phenotypic traits accurately. A dual-modal network combining RGB and depth images was designed using an open lettuce dataset. The network incorporated both a feature correction module and a feature fusion module, significantly enhancing the performance in object detection, segmentation, and trait estimation. The model demonstrated high accuracy in estimating key traits, including fresh weight (fw), dry weight (dw), plant height (h), canopy diameter (d), and leaf area (la), achieving an R2 of 0.9732 for fresh weight. Robustness and accuracy were further validated through 5-fold cross-validation, offering a promising approach for future crop phenotyping.
Why it matches plant phenotyping methodsRGB・深度画像を融合した深層学習によるレタス形質推定手法を開発し、交差検証で性能評価しており、フェノタイピング手法が中心である。
abstracta deep learning model based on multimodal data fusion was developed to estimate lettuce phenotypic traits accurately
Reproduction assets foundThe paper's RGB-D lettuce images and trait measurements come from the publicly available Third Autonomous Greenhouse Challenge dataset deposited at 4TU.ResearchData, with an explicit availability statement and URL matching an allowed URL. No author analysis code or trained model is disclosed.Dataset · publicThis study used the Third Autonomous Greenhouse Challenge: Online Challenge Lettuce Images dataset publicly available at 4TU.ResearchData [ 36 ].Open asset ↗4TU.ResearchDatalines:819-832Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
Plant cover and biochemical composition are essential parameters for evaluating cover crop management. Destructive sampling or estimates with aerial imagery require substantial labor, time, expertise, or instrumentation cost. Using low-cost consumer and mobile phone cameras to estimate plant canopy coverage and biochemical composition could broaden the use of high-throughput technologies in research and crop management. Here, we estimated canopy development, tissue nitrogen, and biomass of medium red clover (Trifolium pratense L.), a perennial forage legume and common cover crop, using red-green-blue (RGB) indices collected with standard settings in non-standardized field conditions. Pixels were classified as plant or background using combinations of four RGB indices with both unsupervised machine learning and preset thresholds. The excess green minus red (ExGR) index with a preset threshold of zero was the best index and threshold combination. It correctly identified pixels as plant or background 86.25% of the time. This combination also provided accurate estimates of crop growth and quality: Canopy coverage correlated with red clover biomass (R² = 0.554, root mean square error [RMSE] = 219.29 kg ha⁻¹), and ExGR index values of vegetation pixels were highly correlated with clover nitrogen content (R² = 0.573, RMSE = 3.5 g kg⁻¹) and carbon:nitrogen ratio (R² = 0.574, RMSE = 1.29 g g⁻¹). Data collection were simple to implement and stable across imaging conditions. Pending testing across different sensors, sites, and crop species, this method contributes to a growing and open set of decision support tools for agricultural research and management.
Why it matches plant phenotyping methods低コストRGB画像と画素分類を用いて、植物被覆、バイオマス、窒素含量、C:N比を推定する手法を開発・評価しており、表現型取得が研究の中心です。
abstractUsing low-cost consumer and mobile phone cameras to estimate plant canopy coverage and biochemical composition could broaden the use of high-throughput technologies in research and crop management.
Reproduction assets foundThe paper's authors state that all referenced analysis scripts for the RGB vegetation index processing, thresholding, and canopy cover estimation are publicly available on GitHub. The phenotype/trait data (images, biomass, N, C:N measurements) are deposited at a U of M repository (hdl.handle.net/11299/263900), but thatCode · publicreferenced scripts are available at https://github.com/RTGS- of nitrogen dictated by biomass and nitrogen content, and theOpen asset ↗pdf-page:4 lines:1-49Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Multispectral imaging by unoccupied aerial vehicles provides a nondestructive, high-throughput approach to measure biomass accumulation over successive alfalfa (Medicago sativa L. subsp. sativa) harvests. Information from estimated growth curves can be used to infer harvest biomass and to gain insights into the relationship between growth dynamics and forage biomass stability across cuttings and years. In this study, multispectral imaging and several common vegetation indices were used to estimate genetic parameters and model growth of alfalfa cultivars to determine the longitudinal relationship between vegetation indices and forage biomass. Results showed moderate heritability for vegetation indices, with median plot level heritability ranging from 0.11 to 0.64, across multiple cuttings in three trials planted in Ithaca, NY, and Las Cruces, NM. Genetic correlations between the normalized difference vegetation index and forage biomass were moderate to high across trials, cuttings, and the timing of multispectral image capture. To evaluate the relationship between growth parameters and forage biomass stability across cuttings and environmental conditions, random regression modeling approaches were used to estimate the growth parameters of cultivars for each cutting and the variance in growth was compared to the variance in genetic estimates of forage biomass yield across cuttings. These analyses revealed high correspondence between stability in growth parameters and stability of forage yield. The results of this study indicate that vegetation indices are effective at modeling genetic components of biomass accumulation, presenting opportunities for more efficient screening of cultivars and new longitudinal modeling approaches that can provide insights into temporal factors influencing cultivar stability.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像と植生指数を用いてアルファルファのバイオマス蓄積を推定・モデル化し、遺伝パラメータや生育安定性を評価することが研究の中心であるため。
abstractMultispectral imaging by unoccupied aerial vehicles provides a nondestructive, high-throughput approach to measure biomass accumulation over successive alfalfa (Medicago sativa L. subsp. sativa) harvests.
Reproduction assets foundThe paper's authors publicly deposited the R analysis code and input data for the random regression growth-curve modeling and stability analysis in a GitHub repository, explicitly stated in the Data availability section. Phenotype/imagery data themselves are only available upon request (request_only), and Pix4D is a第三方Code · publicAll data is available upon request. R Code and input data are available in the github: https://github.com/rthapa1/FFAR_RandomRegressionModel_growthcurve_modelling_stabilityanalysis_alfalfa .Open asset ↗rthapa1/FFAR_RandomRegressionModel_growthcurve_modelling_stabilityanalysis_alfalfalines:145-180Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
Studies on the phenotypic traits and their associations in Chinese cabbage lack precise and objective digital evaluation metrics. Traditional assessment methods often rely on subjective evaluations and experience, compromising accuracy and reliability. This study develops an innovative, comprehensive trait evaluation method based on 3D point cloud technology, with the aim of enhancing the precision, reliability, and standardization of the comprehensive phenotypic traits of Chinese cabbage. By using multi-view image sequences and structure-from-motion algorithms, 3D point clouds of 50 plants from each of the 17 Chinese cabbage varieties were reconstructed. Color-based region growing and 3D convex hull techniques were employed to measure 30 agronomic traits. Comparisons between 3D point cloud-based measurements of the plant spread, plant height, leaf area, and leaf ball volume and traditional methods yielded R2 values greater than 0.97, with root mean square errors of 1.27 cm, 1.16 cm, 839.77 cm3, and 59.15 cm2, respectively. Based on the plant spread and plant height, a linear regression prediction of Chinese cabbage weights was conducted, yielding an R2 value of 0.76. Integrated optimization algorithms were used to test the parameters, reducing the measurement time from 55 min when using traditional methods to 3.2 min. Furthermore, in-depth analyses including variation, correlation, principal component analysis, and clustering analyses were conducted. Variation analysis revealed significant trait variability, with correlation analysis indicating 21 pairs of traits with highly significant positive correlations and 2 pairs with highly significant negative correlations. The top six principal components accounted for 90% of the total variance. Using the elbow method, k-means clustering determined that the optimal number of clusters was four, thus classifying the 17 cabbage varieties into four distinct groups. This study provides new theoretical and methodological insights for exploring phenotypic trait associations in Chinese cabbage and facilitates the breeding and identification of high-quality varieties. Compared with traditional methods, this system provides significant advantages in terms of accuracy, speed, and comprehensiveness, with its low cost and ease of use making it an ideal replacement for manual methods, being particularly suited for large-scale monitoring and high-throughput phenotyping.
Why it matches plant phenotyping methods中国白菜の表現型を3D点群から抽出する測定法を開発し、従来法との精度比較・検証および高速化を行っており、植物表現型測定が研究の中心である。
abstractThis study develops an innovative, comprehensive trait evaluation method based on 3D point cloud technology
Reproduction assets foundThe paper's phenotyping analysis code is explicitly deposited on a public GitHub repository with an authors' URL. The phenotype/trait measurement data themselves are only available upon request, so they do not qualify as a public asset.Code · publicapproach significantly streamlines the process, saving time and
enhancing efficiency by automating tasks which previously required extensive manual ef-
fort, thereby ensuring a more systematic and reliable method of phenotypic information
detection. The code used in this study can be accessed at the following GitHub repository:
https://github.com/chongchong123123/code (accessed on 18 October 2024).
2.4. Accuracy Analysis of Agronomic Parameter Measurements
In the course of agronomic trait measurement research, we utilized point cloud tech-
nology to measure key agronomic traits, including the plant height, plant spread, various
leaf dimensions (leaf length and leaf width), the width and thicOpen asset ↗chongchong123123/codepdf-raw-page:8 lines:1-62Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Unmanaged forest ecosystems play a critical role in addressing the ongoing climate and biodiversity crises. As there is no commercial interest in monitoring the health and development of such inaccessible habitats, low-cost assessment approaches are needed. We used a method combining RGB imagery acquired using an Unmanned Aerial Vehicle (UAV), Sentinel-2 data, and field surveys to determine the carbon stock of an unmanaged forest in the UNESCO World Heritage Site wilderness area Dürrenstein-Lassingtal in Austria. The entry-level consumer drone (DJI Mavic Mini) and freely available Sentinel-2 multispectral datasets were used for the evaluation. We merged the Sentinel-2 derived vegetation index NDVI with aerial photogrammetry data and used an orthomosaic and a Digital Surface Model (DSM) to map the extent of woodland in the study area. The Random Forest (RF) machine learning (ML) algorithm was used to classify land cover. Based on the acquired field data, the average carbon stock per hectare of forest was determined to be 371.423 ± 51.106 t of CO2 and applied to the ML-generated class Forest. An overall accuracy of 80.8% with a Cohen’s kappa value of 0.74 was achieved for the land cover classification, while the carbon stock of the living above-ground biomass (AGB) was estimated with an accuracy within 5.9% of field measurements. The proposed approach demonstrated that the combination of low-cost remote sensing data and field work can predict above-ground biomass with high accuracy. The results and the estimation error distribution highlight the importance of accurate field data.
Why it matches plant phenotyping methodsUAV・衛星リモートセンシングと機械学習により森林の地上部バイオマス（炭素蓄積量）を推定し、現地測定と精度検証しているため、植物群落レベルの形質推定手法が中心です。
abstractWe used a method combining RGB imagery acquired using an Unmanned Aerial Vehicle (UAV), Sentinel-2 data, and field surveys to determine the carbon stock of an unmanaged forest
Reproduction assets foundThe paper's Data Availability Statement points to an openly available Zenodo deposit containing the original study data (field carbon stock measurements, UAV-derived datasets, and Sentinel-2 based analysis inputs). No separate author analysis code or trained model repository is mentioned.Dataset · publicData Availability Statement: The original data presented in the study are openly available here:
https://doi.org/10.5281/zenodo.11657557, accessed on 5 June 2024.Open asset ↗zenodo · 10.5281/zenodo.11657557pdf-page:17 lines:1-58Code / dataset availability confirmedarXiv · OpenAlex · checked 13 Sept 2026
Forest mapping provides critical observational data needed to understand the dynamics of forest environments. Notably, tree diameter at breast height (DBH) is a metric used to estimate forest biomass and carbon dioxide sequestration. Manual methods of forest mapping are labor intensive and time consuming, a bottleneck for large-scale mapping efforts. Automated mapping relies on acquiring dense forest reconstructions, typically in the form of point clouds. Terrestrial laser scanning (TLS) and mobile laser scanning (MLS) generate point clouds using expensive LiDAR sensing, and have been used successfully to estimate tree diameter. Neural radiance fields (NeRFs) are an emergent technology enabling photorealistic, vision-based reconstruction by training a neural network on a sparse set of input views. In this paper, we present a comparison of MLS and NeRF forest reconstructions for the purpose of trunk diameter estimation in a mixed-evergreen Redwood forest. In addition, we propose an improved DBH-estimation method using convex-hull modeling. Using this approach, we achieved 1.68 cm RMSE, which consistently outperformed standard cylinder modeling approaches. Our code contributions and forest datasets are freely available at https://github.com/harelab-ucsc/RedwoodNeRF.
Why it matches plant phenotyping methodsNeRFおよびMLSによる森林再構成から樹木DBHを推定し、凸包モデルによる推定法を提案・比較検証しているため、植物形質取得手法が中心です。
abstractIn this paper, we present a comparison of MLS and NeRF forest reconstructions for the purpose of trunk diameter estimation in a mixed-evergreen Redwood forest.
Reproduction assets foundThe authors explicitly state their code contributions and forest datasets (SLAM and NeRF reconstructions used for DBH estimation) are freely available in a public GitHub repository. The other URLs are a cited third-party tool (NeRFCapture) and a background reference (USDA aerial survey), neither of which is a paper-ownDataset · publicOur code contributions and forest datasets are freely available at https://github.com/harelab-ucsc/RedwoodNeRF .Open asset ↗harelab-ucsc/RedwoodNeRFlines:1-52Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Field / plotWhole plant / canopy / plot / fieldPhysiological trait estimationBiomass / plant weightWater status / transpiration
Abstract This study assesses the potential of regional microwave backscatter data assimilation (DA) in AquaCrop for the first time, using NASA's Land Information System. The objective is to assess whether the assimilation setup can improve surface soil moisture (SSM) and crop biomass estimates. SSM and crop biomass simulations from AquaCrop were updated using Sentinel‐1 synthetic aperture radar observations, over three regions in Europe in two separate DA experiments. The first experiment concerned updating SSM using VV‐polarized backscatter and the corrections were propagated via the model to the biomass. In the second experiment, the DA setup was extended by also updating the biomass with VH‐polarized backscatter. SSM was evaluated with local in situ data and with downscaled Soil Moisture Active Passive (SMAP) retrievals for all cropland grid cells, whereas crop biomass was compared to SMAP vegetation optical depth and the Copernicus dry matter productivity. The assimilation showed mixed results for root mean square error and Pearson's correlation, with slight overall improvements in the (anomaly) correlations of updated SSM relative to independent in situ and satellite data. By contrast, the biomass estimates obtained with backscatter DA did not agree better with reference data sets. Overall, the SSM evaluation showed that there is potential in using Sentinel‐1 backscatter for assimilation in AquaCrop, but the present setup was not able to improve crop biomass estimates. Our study reveals how the complex interaction between SSM, crop biomass and backscatter affect the impact and performance of DA, offering insight into ways to optimize DA for crop growth estimation.
Why it matches plant phenotyping methodsSentinel-1後方散乱をAquaCropへ同化し、作物バイオマスを推定・独立データで評価する手法が研究の中心であり、植物形質の取得・推定方法を実質的に検証している。
abstractThe objective is to assess whether the assimilation setup can improve surface soil moisture (SSM) and crop biomass estimates.
Reproduction assets foundThe Data Availability Statement points to the authors' public GitHub repository containing the water cloud model (WCM) calibration scripts used in this paper's Sentinel-1 backscatter forward-operator analysis. Other listed resources (AquaCrop source, MERRA-2, HWSD, CORINE, SMAP, VODsmap) are generic model code or thirdCode · publiccode into LIS has not yet been officially released, but the AquaCrop source code
can be found on the FAO website, https://www.fao.org/aquacrop/en/. The following repository includes the
generic crop file and management file; https://doi.org/10.1002/2014MS000330. The water cloud model (WCM)
calibration scripts can be found here: https://github.com/KUL‐RSDA/obs_operator_calibration. All data that
were used for model input and evaluation are freely available online. Please visit the following links for data
access. MERRA‐2 variables: https://disc.gsfc.nasa.gov/datasets?project=MERRA‐2(last access: 1 Jan 2022,
Global Modeling and Assimilation office, 2015a, https://doi.org/10.5067/VJAFPLI1CSIV, Open asset ↗KUL‐RSDA/obs_operator_calibrationpdf-layout-page:26 lines:1-26Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Background Transcriptome-based prediction of complex phenotypes is a relatively new statistical method that links genetic variation to phenotypic variation. The selection of large-effect genes based on a priori biological knowledge is beneficial for predicting oligogenic traits; however, such a simple gene selection method is not applicable to polygenic traits because causal genes or large-effect loci are often unknown. Here, we used several gene-level features and tested whether it was possible to select a gene subset that resulted in better predictive ability than using all genes for predicting a polygenic trait. Results Using the phenotypic values of shoot and root traits and transcript abundances in leaves and roots of 57 rice accessions, we evaluated the predictive abilities of the transcriptome-based prediction models. Leaf transcripts predicted shoot phenotypes, such as plant height, more accurately than root transcripts, whereas root transcripts predicted root phenotypes, such as crown root length, more accurately than leaf transcripts. Furthermore, we used the following three features to train the prediction model: (1) tissue specificity of the transcripts, (2) ontology annotations, and (3) co-expression modules for selecting gene subsets. Although models trained by a gene subset often resulted in lower predictive abilities than the model trained by all genes, some gene subsets showed improved predictive ability. For example, using genes expressed in roots but not in leaves, the predictive ability for crown root diameter was improved by more than 10% (R 2 = 0.59 when using all genes; R 2 = 0.66, using 1,554 root-specifically expressed genes). Similarly, genes annotated as "gibberellic acid sensitivity" showed higher predictive ability than using all genes for root dry weight. Conclusions Our results highlight both the possibility and difficulty of selecting an appropriate gene subset to predict polygenic traits from transcript abundance, given the current biological knowledge and information. Further integration of multiple sources of information, as well as improvements in gene characterization, may enable the selection of an optimal gene set for the prediction of polygenic phenotypes.
Why it matches plant phenotyping methods遺伝子発現データから植物の複合形質を予測する統計的手法を開発・評価しており、形質予測モデルの性能比較が研究の中心である。
abstractTranscriptome-based prediction of complex phenotypes is a relatively new statistical method that links genetic variation to phenotypic variation.
Reproduction assets foundThe authors state that all analysis code for the transcriptome-based prediction study is publicly available on Figshare, which is a paper-specific, publicly actionable code asset. Phenotype data are only in a prior study's supplementary file and transcriptome data in GEO (GSE162313), which are cited prior deposits, notCode · publicw sequence data were deposited in the DNA Data Bank of Japan Sequence Read Archive in a previous study [27]. Transcriptome data are available from the Gene Expression Omnibus ( GSE162313 ) and phenotype data are available in the supplementary file of a previous study [28]. All codes for the data analysis are shown in Figshare ( https://doi.org/10.6084/m9.figshare.26067532.v1 ).
Declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
The authors declare no competing interests.
Abbreviations
WRCOpen asset ↗Figshare · 10.6084/m9.figshare.26067532.v1lines:370-396Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
To address the underestimation of rape yield by traditional gramineous crop yield simulation methods based on crop models, this study used the WOFOST crop model to estimate rape yield in the main producing areas of southern Hunan based on 2 years of field-measured data, with consideration given to the photosynthesis of siliques, which are non-foliar green organs. First, the total photosynthetic area index (TPAI), which considers the photosynthesis of siliques, was proposed as a substitute for the leaf area index (LAI) as the calibration variable in the model. Two parameter calibration methods were subsequently proposed, both of which consider photosynthesis by siliques: the TPAI-SPA method, which is based on the TPAI coupled with a specific pod area, and the TPAI-Curve method, which is based on the TPAI and curve fitting. Finally, the 2 proposed parameter calibration methods were validated via 2 years of observed rape data. The results indicate that compared with traditional LAI-based crop model calibration methods, the TPAI-SPA and TPAI-Curve methods can improve the accuracy of rape yield estimation. The estimation accuracy ( R 2 ) for the total weight of storage organs (TWSO) and above-ground biomass (TAGP) increased by 9.68% and 49.86%, respectively, for the TPAI-SPA method and by 14.04% and 42.94%, respectively, for the TPAI-Curve method. Thus, the 2 calibration methods proposed in this study are of important practical importance for improving the accuracy of rape yield simulations. This study provides a novel technical approach for utilizing crop growth models in the yield estimation of oilseed crops.
Why it matches plant phenotyping methods非葉部器官の光合成を組み込んだTPAIを新たな校正変数として提案し、作物モデルによる収量・バイオマス推定法を開発・検証しているため、表現型推定手法が中心である。
abstractthe total photosynthetic area index (TPAI), which considers the photosynthesis of siliques, was proposed as a substitute for the leaf area index (LAI) as the calibration variable in the model.
Reproduction assets foundThe paper's Data Availability statement explicitly deposits the authors' TPAI-SPA and TPAI-Curve calibration code/training scripts for the WOFOST rape yield estimation on GitHub at a public URL, which is an allowed URL and matches the paper's computational analysis.Code · publicThe code and training script of TPAI-SPA and TPAI-Curve has been hosted to GitHub and is available at https://github.com/rsw1998/TPAI-SPA-Curve-for-WOFOST .Open asset ↗rsw1998/TPAI-SPA-Curve-for-WOFOSTlines:675-747Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Kelps are vital for marine ecosystems, yet the genetic diversity underlying their capacity to adapt to climate change remains unknown. In this study, we focused on the kelp Macrocystis pyrifera a species critical to coastal habitats. We developed a protocol to evaluate heat stress response in 204 Macrocystis pyrifera genotypes subjected to heat stress treatments ranging from 21 °C to 27 °C. Here we show that haploid gametophytes exhibiting a heat-stress tolerant (HST) phenotype also produced greater biomass as genetically similar diploid sporophytes in a warm-water ocean farm. HST was measured as chlorophyll autofluorescence per genotype, presented here as fluorescent intensity values. This correlation suggests a predictive relationship between the growth performance of the early microscopic gametophyte stage HST and the later macroscopic sporophyte stage, indicating the potential for selecting resilient kelp strains under warmer ocean temperatures. However, HST kelps showed reduced genetic variation, underscoring the importance of integrating heat tolerance genes into a broader genetic pool to maintain the adaptability of kelp populations in the face of climate change.
Why it matches plant phenotyping methods熱ストレス耐性という植物状態をクロロフィル自家蛍光で定量するプロトコルを開発しており、表現型取得法が研究の中心的要素として明示されている。
abstractWe developed a protocol to evaluate heat stress response in 204 Macrocystis pyrifera genotypes subjected to heat stress treatments ranging from 21 °C to 27 °C.
Reproduction assets foundThe authors publicly deposited both the analysis scripts and the numerical source data (including raw fluorescence intensity values underlying the heat-stress phenotyping) in a Zenodo repository, with explicit availability statements and URLs in the Data availability and Code availability sections.Code · publicAll scripts used in this study are available in a Zenodo repository at https://doi.org/10.5281/zenodo.13315681 .Open asset ↗Zenodo · 10.5281/zenodo.13315681lines:168-242Dataset · publicNumerical source data for the graph presented in Figs. 1 – 3 , and Fig. 5 can be found in the Zenodo repository here: https://doi.org/10.5281/zenodo.13315681 .Open asset ↗Zenodo · 10.5281/zenodo.13315681lines:148-167Code / dataset availability confirmedCrossref · checked 7 Sept 2026
Precision agriculture integrates multiple sensors and data types to support farmers with informed decision-making tools throughout crop cycles. This study evaluated Aboveground Biomass (AGB) estimates of Rye using attributes derived from PlanetScope (PS) optical, Sentinel-1 Synthetic Aperture Radar (SAR), and hybrid (optical plus SAR) datasets. Optical attributes encompassed surface reflectance from PS’s blue, green, red, and near-infrared (NIR) bands, alongside the Normalized Difference Vegetation Index (NDVI) and Enhanced Vegetation Index (EVI). Sentinel-1 SAR attributes included the C-band Synthetic Aperture Radar Ground Range Detected, VV and HH polarizations, and both Ratio and Polarization (Pol) indices. Ground reference AGB data for Rye (Secale cereal L.) were collected from 50 samples and four dates at a farm located in southern Brazil, aligning with image acquisition dates. Multiple linear regression models were trained and validated. AGB was estimated based on individual (optical PS or Sentinel-1 SAR) and combined datasets (optical plus SAR). This process was repeated 100 times, and variable importance was extracted. Results revealed improved Rye AGB estimates with integrated optical and SAR data. Optical vegetation indices displayed higher correlation coefficients (r) for AGB estimation (r = +0.67 for both EVI and NDVI) compared to SAR attributes like VV, Ratio, and polarization (r ranging from −0.52 to −0.58). However, the hybrid regression model enhanced AGB estimation (R2 = 0.62, p
Why it matches plant phenotyping methods光学・SARセンサーデータを統合してライムギの地上部バイオマスを推定し、回帰モデルを訓練・検証しているため、植物形質の取得・推定手法が研究の中心です。
abstractThis study evaluated Aboveground Biomass (AGB) estimates of Rye using attributes derived from PlanetScope (PS) optical, Sentinel-1 Synthetic Aperture Radar (SAR), and hybrid (optical plus SAR) datasets.
Reproduction assets foundThe paper's Sentinel-1 SAR processing workflow is publicly shared as a Google Earth Engine JavaScript script with an explicit availability statement and URL. The field AGB measurements and PlanetScope data are not public (available only on reasonable request from the corresponding author).Code · publicData Availability Statement: The Google Earth Engine script to process Sentinel-1 data is available at
[https://code.earthengine.google.com/219fc3c05b8ae8132ae2d758ccba3d1e?noload=true] (accessed
on 12 July 2024).Open asset ↗pdf-page:17 lines:1-59Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 7 Sept 2026
BACKGROUND: Image-based crop growth modeling can substantially contribute to precision agriculture by revealing spatial crop development over time, which allows an early and location-specific estimation of relevant future plant traits, such as leaf area or biomass. A prerequisite for realistic and sharp crop image generation is the integration of multiple growth-influencing conditions in a model, such as an image of an initial growth stage, the associated growth time, and further information about the field treatment. While image-based models provide more flexibility for crop growth modeling than process-based models, there is still a significant research gap in the comprehensive integration of various growth-influencing conditions. Further exploration and investigation are needed to address this gap. METHODS: We present a two-stage framework consisting first of an image generation model and second of a growth estimation model, independently trained. The image generation model is a conditional Wasserstein generative adversarial network (CWGAN). In the generator of this model, conditional batch normalization (CBN) is used to integrate conditions of different types along with the input image. This allows the model to generate time-varying artificial images dependent on multiple influencing factors. These images are used by the second part of the framework for plant phenotyping by deriving plant-specific traits and comparing them with those of non-artificial (real) reference images. In addition, image quality is evaluated using multi-scale structural similarity (MS-SSIM), learned perceptual image patch similarity (LPIPS), and Fréchet inception distance (FID). During inference, the framework allows image generation for any combination of conditions used in training; we call this generation data-driven crop growth simulation. RESULTS: Experiments are performed on three datasets of different complexity. These datasets include the laboratory plant Arabidopsis thaliana (Arabidopsis) and crops grown under real field conditions, namely cauliflower (GrowliFlower) and crop mixtures consisting of faba bean and spring wheat (MixedCrop). In all cases, the framework allows realistic, sharp image generations with a slight loss of quality from short-term to long-term predictions. For MixedCrop grown under varying treatments (different cultivars, sowing densities), the results show that adding these treatment information increases the generation quality and phenotyping accuracy measured by the estimated biomass. Simulations of varying growth-influencing conditions performed with the trained framework provide valuable insights into how such factors relate to crop appearances, which is particularly useful in complex, less explored crop mixture systems. Further results show that adding process-based simulated biomass as a condition increases the accuracy of the derived phenotypic traits from the predicted images. This demonstrates the potential of our framework to serve as an interface between a data-driven and a process-based crop growth model. CONCLUSION: The realistic generation and simulation of future plant appearances is adequately feasible by multi-conditional CWGAN. The presented framework complements process-based models and overcomes their limitations, such as the reliance on assumptions and the low exact field-localization specificity, by realistic visualizations of the spatial crop development that directly lead to a high explainability of the model predictions.
Why it matches plant phenotyping methods植物画像を生成し、そこから植物個体別形質を推定する二段階の画像ベース表現型解析フレームワークを開発・評価しており、表現型取得・推定手法が研究の中心である。
abstractWe present a two-stage framework consisting first of an image generation model and second of a growth estimation model, independently trained.
Reproduction assets foundThe paper's authors explicitly state that source code and links to the phenotyping datasets (Arabidopsis, GrowliFlower, MixedCrop) are publicly available in their GitHub repository, which implements the multi-conditional CWGAN crop growth simulation and growth estimation framework.Code · publicSource code and links to the datasets are publicly available at https://github.com/luked12/crop-growth-cgan .Open asset ↗luked12/crop-growth-cganlines:216-253Code / dataset availability confirmedOpenAlex · Europe PMC · checked 7 Sept 2026
To maximise the throughput of novel, high-throughput phenotyping platforms, many researchers have utilised smaller pot sizes to increase the number of biological replicates that can be grown in spatially limited controlled environments. This may confound plant development through a process known as “pot binding”, particularly in larger species including potato (Solanum tuberosum), and under water-restricted conditions. We aimed to investigate the water availability hypothesis of pot binding, which predicts that small pots have insufficient water holding capacities to prevent drought stress between irrigation periods, in potato. Two cultivars of potato were grown in small (5 L) and large (20 L) pots, were kept under polytunnel conditions, and were subjected to three irrigation frequencies: every other day, daily, and twice daily. Plants were phenotyped with two Phenospex PlantEye F500s and canopy and tuber fresh mass and dry matter were measured. Increasing irrigation frequency from every other day to daily was associated with a significant increase in fresh tuber yield, but only in large pots. This suggests a similar level of drought stress occurred between these treatments in the small pots, supporting the water availability hypothesis of pot binding. Further increasing irrigation frequency to twice daily was still not sufficient to increase yields in small pots but it caused an insignificant increase in yield in the larger pots, suggesting some pot binding may be occurring in large pots under daily irrigation. Canopy temperatures were significantly higher under each irrigation frequency in the small pots compared to large pots, which strongly supports the water availability hypothesis as higher canopy temperatures are a reliable indicator of drought stress in potato. Digital phenotyping was found to be less accurate for larger plants, probably due to a higher degree of self-shading. The research demonstrates the need to define the optimum pot size and irrigation protocols required to completely prevent pot binding and ensure drought treatments are not inadvertently applied to control plants.
Why it matches plant phenotyping methodsPlantEyeを用いたデジタルフェノタイピングの適用と精度評価が研究上の主要要素であり、植物のキャノピー温度や成長状態を測定し、植物サイズによる測定精度低下も検討している。
abstractPlants were phenotyped with two Phenospex PlantEye F500s and canopy and tuber fresh mass and dry matter were measured.
Reproduction assets foundThe paper's data availability statement points to a public Zenodo deposit containing the datasets generated and analysed in this potato pot-binding phenotyping study.Dataset · publicThe datasets generated and analysed for this study can be found in the Zendo repository at https://doi.org/10.5281/zenodo.10707587 .Open asset ↗Zenodo · 10.5281/zenodo.10707587lines:845-856Code / dataset availability confirmedCrossref · Europe PMC · checked 14 Sept 2026
Growth chamberRGB / grayscaleRootObject detectionSegmentationGrowth / time-series analysisBiomass / plant weightGrowth / development / phenologyRoot system architecture
Abstract Flatbed scanners are commonly used for root analysis, but typical manual segmentation methods are time-consuming and prone to errors, especially in large-scale, multi-plant studies. Furthermore, the complex nature of root structures combined with noisy backgrounds in images complicates automated analysis. Addressing these challenges, this article introduces RhizoNet, a deep learning-based workflow to semantically segment plant root scans. Utilizing a sophisticated Residual U-Net architecture, RhizoNet enhances prediction accuracy and employs a convex hull operation for delineation of the primary root component. Its main objective is to accurately segment root biomass and monitor its growth over time. RhizoNet processes color scans of plants grown in a hydroponic system known as EcoFAB, subjected to specific nutritional treatments. The root detection model using RhizoNet demonstrates strong generalization in the validation tests of all experiments despite variable treatments. The main contributions are the standardization of root segmentation and phenotyping, systematic and accelerated analysis of thousands of images, significantly aiding in the precise assessment of root growth dynamics under varying plant conditions, and offering a path toward self-driving labs.
Why it matches plant phenotyping methods植物根の画像分割と根バイオマス・成長の表現型抽出ワークフローを開発・検証しており、フェノタイピング手法が中心である。
abstractthis article introduces RhizoNet, a deep learning-based workflow to semantically segment plant root scans.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicPython codes for root scans segmentation enabled by RhizoNet were created by the authors and are described in this paper. These codes will be available free of charge upon acceptance, and with open source at: https://github.com/lbl-camera/rhizonet .Open asset ↗lbl-camera/rhizonetlines:154-177Code / dataset availability confirmedCrossref · checked 7 Sept 2026
Abstract Enhancing rapid phenotyping for key plant traits, such as biomass and nitrogen content, is critical for effectively monitoring crop growth and maximizing yield. Studies have explored the relationship between vegetation indices (VIs) and plant traits using drone imagery. However, there is a gap in the literature regarding data availability, accessible datasets. Based on this context, we conducted a systematic review to retrieve relevant data worldwide on the state of the art in drone-based plant trait assessment. The final dataset consists of 41 peer-reviewed papers with 11,189 observations for 11 major crop species distributed across 13 countries. It focuses on the association of plant traits with VIs at different growth/phenological stages. This dataset provides foundational knowledge on the key VIs to focus for phenotyping key plant traits. In addition, future updates to this dataset may include new open datasets. Our goal is to continually update this dataset, encourage collaboration and data inclusion, and thereby facilitate a more rapid advance of phenotyping for critical plant traits to increase yield gains over time.
Why it matches plant phenotyping methodsドローン画像と植生指数に基づく作物形質評価研究を体系的に収集・統合したデータセットであり、植物フェノタイピングの再利用可能な資源が中心です。
titleA global dataset for assessing nitrogen-related plant traits using drone imagery in major field crop species
Reproduction assets foundThe paper's own dataset (Dataset.xlsx with UAV_dataset, sensor info, and quantitative analysis tabs) plus authors' analysis code (R scripts and Jupyter notebook for Figs. 2-4) are publicly deposited on figshare at https://doi.org/10.6084/m9.figshare.22938797.v4.Dataset · publicThe data are accessible on the figshare repository39, available at https://doi.org/10.6084/m9.figshare.22938797,
and includes the following files:
1. “Dataset.xlsx” includes the data. It contains three tabs: “UAV_dataset”, “Sensor and processing info”, and
“Quantitatively analysis”.Open asset ↗figsharepdf-page:3 lines:58-75Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
Published23 May 2024International Journal of Applied Earth Observation and GeoinformationCited by 9 · OpenAlex ↗
In smallholder areas, the abandonment of orchards is a recent phenomenon with socioeconomic and environmental consequences. Biomass estimation and monitoring of these areas is essential to analyze their influence on the CO2 balance and to quantify carbon pools. In the current context of energy supply uncertainties and considering the demanding use of alternative energy sources, the quantification of fruit tree biomass in abandoned areas is a question of great interest. In this study, the above biomass of abandoned orange trees was estimated using tree parameters calculated from 3D points derived from images captured by a UAV and applying the Structure from Motion (SfM) technique. From these data, a canopy height model was calculated and used to apply a developed crown contour detection algorithm. Using this information and 3D points, the tree parameters crown area, crown diameter, crown length, maximum tree height, minimum tree height, mean and standard deviation of crown point heights were calculated for a set of 36 felled and weighted orange trees. Stepwise regression was used to estimate the above biomass values. All previously reported variables were included. The crown area parameter produced the most accurate model with R2, RMSE and RMSE % values of 0.85, 10.165 kg and 19.56 %, respectively. These results demonstrate the potential of UAV-SfM-derived 3D point clouds to estimate the above-ground biomass of abandoned fruit trees, relevant information for environmental analysis and biofuel energy production.
Why it matches plant phenotyping methodsUAV-SfMによる3D画像から樹冠形状・樹高などの植物形質を抽出し、樹冠検出アルゴリズムと回帰モデルで個体バイオマスを推定する方法が中心である。
abstractthe above biomass of abandoned orange trees was estimated using tree parameters calculated from 3D points derived from images captured by a UAV and applying the Structure from Motion (SfM) technique
Reproduction assets foundThe article's 'Research data' section states that the point cloud, crown delineation source code, reference data, and tree parameters are publicly available in a Mendeley Data repository (doi:10.17632/j3k2mctbnv.1). This is a paper-specific, public, actionable asset. Note: the Mendeley DOI itself is not in the allowed-Dataset · publicThe dataset containing point cloud, source code for crown delinea
tion, reference data, and parameters of abandoned orange groves, is
available for download from Mendeley data repository doi: 10
.17632/j3k2mctbnv.1.Open asset ↗Mendeley data repositorypdf-raw-page:9 lines:1-76Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
Introduction: is a promising cellulosic feedstock crop for bioenergy due to its high biomass yields. However, early growth phases of sorghum are sensitive to cold stress, limiting its planting in temperate environments. Cold adaptability is crucial for cultivating bioenergy and grain sorghum at higher latitudes and elevations, or for extending the growing season. Identifying genes and alleles that enhance biomass accumulation under early cold stress can lead to improved sorghum varieties through breeding or genetic engineering. Methods: We conducted image-based phenotyping on 369 accessions from the sorghum Bioenergy Association Panel (BAP) in a controlled environment with early cold treatment. The BAP includes diverse accessions with dense genotyping and varied racial, geographical, and phenotypic backgrounds. Daily, non-destructive imaging allowed temporal analysis of growth-related traits and water use efficiency (WUE). A genome-wide association study (GWAS) was performed to identify genomic intervals and genes associated with cold stress response. Results: The GWAS identified transient quantitative trait loci (QTL) strongly associated with growth-related traits, enabling an exploration of the genetic basis of cold stress response at different developmental stages. This analysis of daily growth traits, rather than endpoint traits, revealed early transient QTL predictive of final phenotypes. The study identified both known and novel candidate genes associated with growth-related traits and temporal responses to cold stress. Discussion: The identified QTL and candidate genes contribute to understanding the genetic mechanisms underlying sorghum's response to cold stress. These findings can inform breeding and genetic engineering strategies to develop sorghum varieties with improved biomass yields and resilience to cold, facilitating earlier planting, extended growing seasons, and cultivation at higher latitudes and elevations.
Why it matches plant phenotyping methods日次の非破壊画像計測を用いて成長関連形質とWUEを時系列で抽出し、早期表現型を解析しており、画像ベースの植物表現型取得が研究の主要な方法として記述されている。
abstractWe conducted image-based phenotyping on 369 accessions from the sorghum Bioenergy Association Panel (BAP) in a controlled environment with early cold treatment.
Reproduction assets foundThe paper's image-derived phenotypic measurements and analysis tables (accession list with phenotypic data, germination data, heritability, trait rankings, SNP-trait correlations, candidate genes) are stated to be included in the article's Supplementary Materials, publicly available at the Frontiers supplementary URL. Supplement · publicof their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Supplementary material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2024.1278802/full#supplementary-material
Supplementary File S1
Table of Bioenergy Association Panel accessions used in this study (adapted from Brenton et al., 2016 ) with image-derived phenotypic data.
Supplementary File S2
Heatmap of a kinship matrix showing correlation analysis among the 369 BAP accessions. The coloOpen asset ↗lines:229-258Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Photosynthesis drives plant physiology, biomass accumulation, and yield. Photosynthetic efficiency, specifically the operating efficiency of PSII (Fq'/Fm'), is highly responsive to actual growth conditions, especially to fluctuating photosynthetic photon fluence rate (PPFR). Under field conditions, plants constantly balance energy uptake to optimize growth. The dynamic regulation complicates the quantification of cumulative photochemical energy uptake based on the intercepted solar energy, its transduction into biomass, and the identification of efficient breeding lines. Here, we show significant effects on biomass related to genetic variation in photosynthetic efficiency of 178 climbing bean (Phaseolus vulgaris L.) lines. Under fluctuating conditions, the Fq'/Fm' was monitored throughout the growing period using hand-held and automated chlorophyll fluorescence phenotyping. The seasonal response of Fq'/Fm' to PPFR (ResponseG:PPFR) achieved significant correlations with biomass and yield, ranging from 0.33 to 0.35 and from 0.22 to 0.31 in two glasshouse and three field trials, respectively. Phenomic yield prediction outperformed genomic predictions for new environments in four trials under different growing conditions. Investigating genetic control over photosynthesis, one single nucleotide polymorphism (Chr09_37766289_13052) on chromosome 9 was significantly associated with ResponseG:PPFR in proximity to a candidate gene controlling chloroplast thylakoid formation. In conclusion, photosynthetic screening facilitates and accelerates selection for high yield potential.
Why it matches plant phenotyping methods携帯型および自動クロロフィル蛍光フェノタイピングによる光合成効率の反復測定と、収量予測への技術適用が研究の中心であるため。
abstractUnder fluctuating conditions, the Fq'/Fm' was monitored throughout the growing period using hand-held and automated chlorophyll fluorescence phenotyping.
Reproduction assets foundThe paper's field MultispeQ chlorophyll fluorescence phenotyping data (Fq'/Fm' with PPFR and environmental covariates for the Dar18B, Dar19B, and Pal19D trials) are publicly available on the PhotosynQ platform via three author-provided project URLs. Glasshouse ChlF/biomass data are only in supplementary files without aDataset · publicThe MultispeQ data are also available on the PhotosynQ data base after creating an account (Darién 2018: https://photosynq.org/projects/climbers-in-darien-2018Open asset ↗PhotosynQ · climbers-in-darien-2018lines:374-422Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Rice (Oryza sativa L.) is a staple cereal in the diet of more than half of the world’s population. Within the European Union, Spain is a leader in rice production due to its climate and tradition, accounting for 26% of total EU production in 2020. The Valencian rice area covers around 15,000 hectares and is strongly influenced by biotic and abiotic factors. An important biotic factor affecting rice production is weeds, which compete with rice for sunlight, water and nutrients. The dominant weed in Spain is Echinochloa spp., although wild rice is becoming increasingly important. Rice cultivation in Valencia takes place in the area of L’Albufera de Valencia, which is a natural park, i.e., a special protection area. In this natural area, the use of phytosanitary products is limited, so it is necessary to use the minimum amount possible. Therefore, the objective of this work is to evaluate the possibility of using remote sensing effectively to determine the effectiveness of the application of the herbicide cyhalofop-butyl by drone for the control of Echinochloa spp. in rice crops in Valencia. The results will be compared with those obtained by using sterilisation machines (electric backpack sprayers) to apply the herbicide. To evaluate the effectiveness of the application, the reflectance obtained by the satellite sensors in the red and near infrared (NIR) wavelengths, as well as the normalised difference vegetation index (NDVI), were used. The remote sensing results were analysed and complemented by the number of rice plants and weeds per area, plant dry weight, leaf area, BBCH phenological state, SPAD index values, chlorophyll content and relative growth rate. Remote sensing is validated as an effective tool for determining the efficacy of an herbicide in controlling weeds applied by both the drone and the electric backpack sprayer. The weeds slowed down their development after the treatment. Depending on the phenological state of the crop and the active ingredient of the herbicide, these results are applicable to other areas with different climatic and environmental conditions.
Why it matches plant phenotyping methodsドローン・衛星リモートセンシングとNDVI等を用いて除草剤効果を評価し、その手法を有効な評価ツールとして検証しているため、植物状態の取得・評価方法が中心である。
abstractTherefore, the objective of this work is to evaluate the possibility of using remote sensing effectively to determine the effectiveness of the application of the herbicide cyhalofop-butyl by drone for the control of Echinochloa spp. in rice crops in Valencia.
Reproduction assets foundThe article states 'Data are contained within the article' and provides no author code, model, or dataset deposit. The only paper-specific public asset is the MDPI supplementary file, which contains Figure S1 showing the control subplots affected by Echinochloa spp. (field imagery related to the phenotyping experiment,Supplement · publicdual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Supplementary Materials
The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/s24030804/s1 . Figure S1. Control subplots affected by Echinochloa spp. (Own elaboration).
Click here for additional data file.
Author ContributionsOpen asset ↗lines:90-101Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
In the dataset presented in this article, samples belonging to one of the following crops, apple, broccoli, leek, and mushroom, were measured by hyperspectral cameras in the visible/near-infrared spectral domain (430-900 nm). The dataset was compiled by putting together measurements from different calibrated hyperspectral imaging cameras and crops to facilitate the training of artificial intelligence models, helping to overcome the generalization problem of hyperspectral models. In particular, this dataset focuses on estimating dry matter content across various crops by a single model in a non-destructive way using hyperspectral measurements. This dataset contains extracted mean reflectance spectra for each sample (n=1028) and their respective dry matter content (%).
Why it matches plant phenotyping methods複数作物の果実・器官について、ハイパースペクトル画像から乾物含量を非破壊推定するデータセットを構築しており、形質取得・推定手法と再利用可能なベンチマークが研究の中心である。
abstractThe dataset was compiled by putting together measurements from different calibrated hyperspectral imaging cameras and crops to facilitate the training of artificial intelligence models, helping to overcome the generalization problem of hyperspectral models.
Reproduction assets foundThe paper is a data descriptor for the SpectroFood hyperspectral dataset; all five Zenodo deposits (meta-dataset plus per-crop hyperspectral image data) are public, paper-specific phenotype/trait datasets with direct URLs in the Specifications Table.Dataset · publicce), Rc: corrected hyperspectral image.
Data source location
Data are stored at Agricultural University of Athens (AUA) premises. Iera Odos 75, 11855 Athens, Greece, Department of Horticultural Engineering
Data accessibility
Repository name:Zenodo
Table data
Data identification number: 10.5281/zenodo.8362947
Direct URL to data: https://zenodo.org/record/8362947
Hyperspectral image data
1) Data identification number: 10.5281/zenodo.10301753
Direct URL to data: https://zenodo.org/records/10301753
2) Data identification number: 10.5281/zenodo.10302438
Direct URL to data: https://zenodo.org/records/10302438
3) Data identification number: 10.5281/zenodo.10302426
Direct URL to data: https:/Open asset ↗Zenodo · 10.5281/zenodo.8362947lines:1-65Dataset · publicOdos 75, 11855 Athens, Greece, Department of Horticultural Engineering
Data accessibility
Repository name:Zenodo
Table data
Data identification number: 10.5281/zenodo.8362947
Direct URL to data: https://zenodo.org/record/8362947
Hyperspectral image data
1) Data identification number: 10.5281/zenodo.10301753
Direct URL to data: https://zenodo.org/records/10301753
2) Data identification number: 10.5281/zenodo.10302438
Direct URL to data: https://zenodo.org/records/10302438
3) Data identification number: 10.5281/zenodo.10302426
Direct URL to data: https://zenodo.org/records/10302426
4) Data identification number: 10.5281/zenodo.10302386
Direct URL to data: https://zenodo.org/records/10302Open asset ↗Zenodo · 10.5281/zenodo.10301753lines:1-65Dataset · publicdo
Table data
Data identification number: 10.5281/zenodo.8362947
Direct URL to data: https://zenodo.org/record/8362947
Hyperspectral image data
1) Data identification number: 10.5281/zenodo.10301753
Direct URL to data: https://zenodo.org/records/10301753
2) Data identification number: 10.5281/zenodo.10302438
Direct URL to data: https://zenodo.org/records/10302438
3) Data identification number: 10.5281/zenodo.10302426
Direct URL to data: https://zenodo.org/records/10302426
4) Data identification number: 10.5281/zenodo.10302386
Direct URL to data: https://zenodo.org/records/10302386
1.
Value of the Data
•
Spectra were acquired using calibrated hyperspectral imaging systems under the sameOpen asset ↗Zenodo · 10.5281/zenodo.10302438lines:1-65Dataset · public8362947
Hyperspectral image data
1) Data identification number: 10.5281/zenodo.10301753
Direct URL to data: https://zenodo.org/records/10301753
2) Data identification number: 10.5281/zenodo.10302438
Direct URL to data: https://zenodo.org/records/10302438
3) Data identification number: 10.5281/zenodo.10302426
Direct URL to data: https://zenodo.org/records/10302426
4) Data identification number: 10.5281/zenodo.10302386
Direct URL to data: https://zenodo.org/records/10302386
1.
Value of the Data
•
Spectra were acquired using calibrated hyperspectral imaging systems under the same controlled conditions for four crops with high variation of dry matter values amongst the same crop and acrossOpen asset ↗Zenodo · 10.5281/zenodo.10302426lines:1-65Dataset · publicps://zenodo.org/records/10301753
2) Data identification number: 10.5281/zenodo.10302438
Direct URL to data: https://zenodo.org/records/10302438
3) Data identification number: 10.5281/zenodo.10302426
Direct URL to data: https://zenodo.org/records/10302426
4) Data identification number: 10.5281/zenodo.10302386
Direct URL to data: https://zenodo.org/records/10302386
1.
Value of the Data
•
Spectra were acquired using calibrated hyperspectral imaging systems under the same controlled conditions for four crops with high variation of dry matter values amongst the same crop and across all four.
•
The dry matter content of the four crops is the common variable when considering the quality of theOpen asset ↗Zenodo · 10.5281/zenodo.10302386lines:1-65Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Abstract The potential of single date fully Polarimetric RADARSAT‐2 data in retrieving crop biophysical parameters using Machine Learning techniques was investigated. Various polarimetric parameters along with coherent and incoherent decomposition techniques were assessed for its sensitivity toward crop parameters like Wet and Dry Biomass, Crop Height, Leaf Area Index and Vegetation Water Content. A set of 39 polarimetric observables extracted from the Quad‐Pol data were used for regression analysis. In this study two Machine Learning techniques Random Forest Regression (RFR) and Multiple Linear Regression (MLR) models were assessed for the prediction of Wet Biomass (gm −2 ) and Height (cm). The most significant (6 out of 39) variables were applied for prediction. The results revealed that RFR algorithm performed better than MLR. The coefficient of determination ( R 2 ) and root‐mean‐square‐error of estimating wet biomass and height were 0.646, 655.65 (gm −2 ) and 0.71, 14.5 (cm) respectively in RFR and 0.566, 683.86 (gm −2 ) and 0.65, 16.14 (cm) respectively in MLR. Thus this study explored the effective application of quad‐pol data for assessing sensitivity and accurate retrieval of parameters using optimum PolSAR observables.
Why it matches plant phenotyping methodsPolSARセンサーデータと機械学習により、作物のバイオマスおよび草丈を推定し、回帰手法の性能を比較・評価しているため、表現型取得手法が中心である。
abstractThe potential of single date fully Polarimetric RADARSAT‐2 data in retrieving crop biophysical parameters using Machine Learning techniques was investigated.
Reproduction assets foundThe paper's Data Availability Statement deposits two paper-specific public assets: the ground-truth field campaign dataset (GT Points, Zenodo 10.5281/zenodo.10403380) and the authors' RFR/MLR prediction code (Zenodo 10.5281/zenodo.10403352). Generic ESA software (PolSARpro, SNAP) is excluded as a general library.Dataset · publicEarth and Space Science
THULASIRAMAN ET AL.
10.1029/2022EA002799
17 of 20
Appendix A: Supplementary Data
Supplementary data to this article, ground truth points collected during 12 August 2019, campaign is provided in
.xlsx format (https://doi.org/10.5281/zenodo.10403380).Appendix B: RFR and MLR Algorithm
The algorithm applied for Random Forest and MLR is displayed below in Figure B1.
Data Availability Statement
The fully polarimetric RADARSAT-2 data was purchased from MDA corporation. The field data collected
during the study can be accessed from Supporting Information section (Appendix A) (htOpen asset ↗Zenodo · 10.5281/zenodo.10403380pdf-raw-page:17 lines:1-77Code / dataset availability confirmedOpenAlex · arXiv · checked 15 Sept 2026
Image-based crop growth modeling can substantially contribute to precision agriculture by revealing spatial crop development over time, which allows an early and location-specific estimation of relevant future plant traits, such as leaf area or biomass. A prerequisite for realistic and sharp crop image generation is the integration of multiple growth-influencing conditions in a model, such as an image of an initial growth stage, the associated growth time, and further information about the field treatment. We present a two-stage framework consisting first of an image prediction model and second of a growth estimation model, which both are independently trained. The image prediction model is a conditional Wasserstein generative adversarial network (CWGAN). In the generator of this model, conditional batch normalization (CBN) is used to integrate different conditions along with the input image. This allows the model to generate time-varying artificial images dependent on multiple influencing factors of different kinds. These images are used by the second part of the framework for plant phenotyping by deriving plant-specific traits and comparing them with those of non-artificial (real) reference images. For various crop datasets, the framework allows realistic, sharp image predictions with a slight loss of quality from short-term to long-term predictions. Simulations of varying growth-influencing conditions performed with the trained framework provide valuable insights into how such factors relate to crop appearances, which is particularly useful in complex, less explored crop mixture systems. Further results show that adding process-based simulated biomass as a condition increases the accuracy of the derived phenotypic traits from the predicted images. This demonstrates the potential of our framework to serve as an interface between an image- and process-based crop growth model.
Why it matches plant phenotyping methods画像生成と成長推定を統合したフレームワークを開発し、生成画像から植物個体の形質を抽出・比較することが中心であるため、植物フェノタイピング手法として含める。
abstractWe present a two-stage framework consisting first of an image prediction model and second of a growth estimation model, which both are independently trained.
Reproduction assets foundThe paper explicitly states that its source code (the multi-conditional CWGAN crop growth simulation framework) is publicly available on GitHub. The SIMPLACE documentation URL is a generic external resource, not a paper-specific asset.Code · publicwth estimation model.
A transferability experiment demonstrates that our framework has the potential to be transferred to crop mixtures in another field with different environmental conditions.
2 Materials and Methods
This section introduces the data basis (Sec. 2.1 ) and the framework 1 1
1
Source code is publicly available at https://github.com/luked12/crop-growth-cgan , where a 2-step approach is followed.
First, an image is predicted (Sec. 2.2 ), and second, the growth is estimated using plant phenotyping (Sec. 2.3 ).
While existing state-of-the-art models are used for growth estimation, which is fine-tuned on our data, the methodological focus of this work is on the first part, image prOpen asset ↗luked12/crop-growth-cganlines:128-235Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Why it matches plant phenotyping methodsカッサバ根の乾物含量とアミロース含量という植物器官形質を対象に、NIRS予測モデルを開発・検証しており、形質取得法が研究の中心です。
abstractnear-infrared reflectance spectroscopy (NIRS) models were developed to aid breeding and selection of DMC and AC
Reproduction assets foundThe paper's field experiment phenotyping data (cassava clones used for NIRS calibration of dry matter and amylose content) is openly available in Cassavabase at the trial 4384 URL, per the authors' explicit availability statements. No author analysis code, NIRS spectra files, or trained model/calibration equations are指Dataset · publicexperiment is available in an open access data repository at
(https://www.cassavabase.org/breeders/trial/4384?format=). The
pre-breeding set of germplasms used in the present study con-
tained genotypes that are from diverse backgrounds (from Inter-
national Institute of Tropical Agriculture (IITA), International
Center for Tropical Agriculture (CIAT) and NaCRRI), for which
diversity is important in development of NIRS calibrations. They
are cOpen asset ↗Cassavabase · trial/4384pdf-raw-page:4 lines:1-91Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
The use of unmanned aerial vehicles (UAVs) has facilitated crop canopy monitoring, enabling yield prediction by integrating regression models. However, the application of UAV-based data to individual-level harvest weight prediction is limited by the effectiveness of obtaining individual features. In this study, we propose a method that automatically detects and extracts multitemporal individual plant features derived from UAV-based data to predict harvest weight. We acquired data from an experimental field sown with 1196 Chinese cabbage plants, using two cameras (RGB and multi-spectral) mounted on UAVs. First, we used three RGB orthomosaic images and an object detection algorithm to detect more than 95% of the individual plants. Next, we used feature selection methods and five different multi-temporal resolutions to predict individual plant weights, achieving a coefficient of determination (R 2 ) of 0.86 and a root mean square error (RMSE) of 436 g/plant. Furthermore, we achieved predictions with an R 2 greater than 0.72 and an RMSE less than 560 g/plant up to 53 days prior to harvest. These results demonstrate the feasibility of accurately predicting individual Chinese cabbage harvest weight using UAV-based data and the efficacy of utilizing multi-temporal features to predict plant weight more than one month prior to harvest.
Why it matches plant phenotyping methodsUAV画像から個体特徴を自動抽出し、収穫重量という植物形質を予測する手法が研究の中心であるため。
abstractwe propose a method that automatically detects and extracts multitemporal individual plant features derived from UAV-based data to predict harvest weight.
Reproduction assets foundThe paper's analysis code is publicly available on GitHub with explicit availability language. The UAV imagery (RGB/multispectral orthomosaics and point cloud data) is only available upon reasonable request from the corresponding author, so it does not qualify as a public asset.Code · publicAll code associated with the current study is available at: https://github.com/anaguilarar/CC_Weight_Prediction .Open asset ↗anaguilarar/CC_Weight_Predictionlines:155-233Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
The strong societal demand to reduce pesticide use and adaptation to climate change challenges the capacities of phenotyping new varieties in the vineyard. High-throughput phenotyping is a way to obtain meaningful and reliable information on hundreds of genotypes in a limited period. We evaluated traits related to growth in 209 genotypes from an interspecific grapevine biparental cross, between IJ119, a local genitor, and Divona, both in summer and in winter, using several methods: fresh pruning wood weight, exposed leaf area calculated from digital images, leaf chlorophyll concentration, and LiDAR-derived apparent volumes. Using high-density genetic information obtained by the genotyping by sequencing technology (GBS), we detected 6 regions of the grapevine genome [quantitative trait loci (QTL)] associated with the variations of the traits in the progeny. The detection of statistically significant QTLs, as well as correlations ( R 2 ) with traditional methods above 0.46, shows that LiDAR technology is effective in characterizing the growth features of the grapevine. Heritabilities calculated with LiDAR-derived total canopy and pruning wood volumes were high, above 0.66, and stable between growing seasons. These variables provided genetic models explaining up to 47% of the phenotypic variance, which were better than models obtained with the exposed leaf area estimated from images and the destructive pruning weight measurements. Our results highlight the relevance of LiDAR-derived traits for characterizing genetically induced differences in grapevine growth and open new perspectives for high-throughput phenotyping of grapevines in the vineyard.
Why it matches plant phenotyping methodsLiDARによるブドウ樹冠・剪定木体積の取得を、従来法との相関、遺伝率、QTL解析で評価しており、植物形質の高スループット計測法が研究の中心です。
abstractThe detection of statistically significant QTLs, as well as correlations ( R 2 ) with traditional methods above 0.46, shows that LiDAR technology is effective in characterizing the growth features of the grapevine.
Reproduction assets foundThe paper's Data availability statement provides a public repository deposit (DOI 10.57745/PETTGY) for the study data and an authors' public ImageJ script for estimating foliage coverage used in the RGB-image phenotyping analysis.Dataset · publictyping but also his expertise and helped with the manuscript review. D.M. supervised the program and helped with manuscript writing. É.D. supervised the whole study and wrote the first draft of the manuscript.
Competing interests: The authors declare that they have no competing interests.
Data availability
Data are available at https://doi.org/10.57745/PETTGY . ImageJ script for estimating foliage coverage: https://forgemia.inra.fr/eric.duchene/image-analysis-scripts/-/blob/main/FoliageCoverage_PC_EN.txt
Supplementary Materials
Supplementary 1
Fig. S1
Tables S1 to S5
Click here for additional data file.
References
1.
Carvalho
LC , Goncalves
EF ,
da
Silva
JM , Costa
JM
.
Potential phOpen asset ↗10.57745/PETTGY · 10.57745/PETTGYlines:825-1015Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
Prescribed burning and pyric herbivory play pivotal roles in mitigating wildfire risks, underscoring the imperative of consistent biomass monitoring for assessing fuel load reductions. Drone-derived surface models promise uninterrupted biomass surveillance but require complex photogrammetric processing. In a Mediterranean mountain shrubland burning experiment, we refined a Structure from Motion (SfM) and Multi-View Stereopsis (MVS) workflow to diminish biases in 3D modeling and RGB drone imagery-based surface reconstructions. Given the multitude of SfM-MVS processing alternatives, stringent quality oversight becomes paramount. We executed the following steps: (i) calculated Root Mean Square Error (RMSE) between Global Navigation Satellite System (GNSS) checkpoints to assess SfM sparse cloud optimization during georeferencing; (ii) evaluated elevation accuracy by comparing the Mean Absolute Error (MAE) of six surface and thirty terrain clouds against GNSS readings and known box dimensions; and (iii) complemented a dense cloud quality assessment with density metrics. Balancing overall accuracy and density, we selected surface and terrain cloud versions for high-resolution (2 cm pixel size) and accurate (DSM, MAE = 57 mm; DTM, MAE = 48 mm) Digital Elevation Model (DEM) generation. These DEMs, along with exceptional height and volume models (height, MAE = 12 mm; volume, MAE = 909.20 cm3) segmented by reference box true surface area, substantially contribute to burn impact assessment and vegetation monitoring in fire management systems.
Why it matches plant phenotyping methodsドローン画像のSfM-MVS処理を改良・精度検証し、植生の高さ・体積・バイオマス監視に用いる手法が研究の中心である。
abstractwe refined a Structure from Motion (SfM) and Multi-View Stereopsis (MVS) workflow to diminish biases in 3D modeling and RGB drone imagery-based surface reconstructions.
Reproduction assets foundThe paper's SfM sparse-cloud optimization analysis was implemented as a Python module in the authors' public MetashapeTools repository (co-author Marvin Ludwig), explicitly linked in the text. The bl_gimbal repository is only a gimbal hardware controller, not phenotyping analysis, and the Data Availability Statement isCode · publicencing process of the sparse cloud [50]. This approach focuses on minimizing the error of
georeferencing check points within the sparse cloud by identifying the optimal filter pa-
rameters. Consequently, only tie points with low reprojection errors are used. This appli-
cation is available as a Python module for MetashapeTools (https://github.com/en-vima/MetashapeTools/, accessed on 30 August 2023).
An orthomosaic is a detailed and geometrically accurate image of an area, composed
of multiple photos that have been orthorectified. Within this framework, once the
Figure 4. (a) Illustrates the optimized workflow for the Metashape Structure from Motion (SfM)
(Ludwig et al, 2020 [50]). (b) RepresOpen asset ↗en-vima/MetashapeToolspdf-raw-page:7 lines:1-31Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
We present a sensitive method for non-contact detection of chloroplast movements in leaves and other photosynthetic tissues, based on changes in the magnitude of cross-polarized reflectance. We examined changes in bidirectional red light reflectance during irradiation with blue light, known to trigger chloroplast relocations. Experiments on the model plant Arabidopsis thaliana , wild-type, and several mutants with disrupted chloroplast movements showed that the chloroplast avoidance response, induced by high blue light, led to a substantial increase in diffuse reflectance of unpolarized red light. The effects of the accumulation response in low blue light were the opposite. The specular reflectance of the leaf was unaffected by the chloroplast positioning. To further improve the specificity of the detection, we examined the effects of chloroplast relocations on the leaf reflectance of a linearly polarized incident beam. The greatest relative change associated with chloroplast movements was observed when the planes of polarization of the incident and detected beams were perpendicular. Further experiments revealed that the chloroplast positioning affected the magnitude of depolarization of light by the leaf. We applied the developed approach to examine chloroplast relocations in four angiosperm species collected in the field. The method allowed us to detect the chloroplast avoidance response in the green stems of bilberry, a sample not amenable to transmittance-based detection. Despite the importance of chloroplast movements for the optimization of photosynthetic efficiency and biomass production, high throughput reflectance-based methods are not routinely used for their detection. This method opens the possibility of non-invasive, non-contact detection of chloroplast relocations in a manner insensitive to the orientation of the leaf.
Why it matches plant phenotyping methods葉のクロロプラスト移動という植物状態を、偏光反射によって非接触・非侵襲的に検出する手法を開発し、複数種で適用しているため、植物フェノタイピング手法が研究の中心である。
abstractWe present a sensitive method for non-contact detection of chloroplast movements in leaves and other photosynthetic tissues, based on changes in the magnitude of cross-polarized reflectance.
Reproduction assets foundThe paper's Data availability statement openly deposits the paper's own reflectance/transmittance phenotype recordings (Arabidopsis WT/mutants and wild plants) on FigShare, and provides authors' public code: BeamJ (Java control software for the phenotyping setup) and openRayTracer (Mathematica ray-tracing package used,Dataset · publiced on the manuscript.
Conflict of interest
The authors declare no conflict of interest.
Funding
This study was supported by the National Science Centre Poland within the MINIATURA 4
project to P.H., number 2020/04/X/NZ4/01256.
Data availability
The data that support the findings of this study are openly available in FigShare at
https://doi.org/10.6084/m9.figshare.21082654 (reflectance and transmittance recordings for
Arabidopsis WT and mutants) and https://doi.org/10.6084/m9.figshare.24424843 (wild
plants). Java source code for the software is publicly available via GitHub at
https://github.com/pawelHerm/beamJ/tree/master/BeamJ. Wolfram Mathematica package for
ray tracing is available at httOpen asset ↗FigShare · 10.6084/m9.figshare.21082654pdf-raw-page:14 lines:1-47Dataset · publicthe National Science Centre Poland within the MINIATURA 4
project to P.H., number 2020/04/X/NZ4/01256.
Data availability
The data that support the findings of this study are openly available in FigShare at
https://doi.org/10.6084/m9.figshare.21082654 (reflectance and transmittance recordings for
Arabidopsis WT and mutants) and https://doi.org/10.6084/m9.figshare.24424843 (wild
plants). Java source code for the software is publicly available via GitHub at
https://github.com/pawelHerm/beamJ/tree/master/BeamJ. Wolfram Mathematica package for
ray tracing is available at https://github.com/plantPhotobiologyLab/openRayTracer.References
Banaś, A. K., Aggarwal, C., Łabuz, J., Sztatelman, O., Gabryś,Open asset ↗FigShare · 10.6084/m9.figshare.24424843pdf-raw-page:14 lines:1-47Code · publicthat support the findings of this study are openly available in FigShare at
https://doi.org/10.6084/m9.figshare.21082654 (reflectance and transmittance recordings for
Arabidopsis WT and mutants) and https://doi.org/10.6084/m9.figshare.24424843 (wild
plants). Java source code for the software is publicly available via GitHub at
https://github.com/pawelHerm/beamJ/tree/master/BeamJ. Wolfram Mathematica package for
ray tracing is available at https://github.com/plantPhotobiologyLab/openRayTracer.References
Banaś, A. K., Aggarwal, C., Łabuz, J., Sztatelman, O., Gabryś, H. (2012). Blue light
signalling in chloroplast movements. Journal of Experimental Botany, 63(4), 1559–
1574.
Baránková, B., LazáOpen asset ↗GitHub · pawelHerm/beamJpdf-raw-page:14 lines:1-47Code · publicuorescence. The filtered light was focused on a
photodetector (amplified silicon photodiode, PDA100A2, Thorlabs) with a plano-convex lens
(LA1074-A, Thorlabs). The angular size of the clear aperture of the collecting lens with
respect to the sample center was 0.019 steradian (calculated using our ray-tracing
Mathematica package https://github.com/plantPhotobiologyLab/openRayTracer). To control
the observation angle, the detector was mounted at the RBB300A/M rotation board
(Thorlabs). The experiments were performed with two angular positions of the polarizer: its
transmission axis was either parallel (transmits P) or perpendicular (transmits S component)
to the plane of incidence. The LEDs suOpen asset ↗GitHub · plantPhotobiologyLab/openRayTracerpdf-raw-page:6 lines:1-45Code / dataset availability confirmedEurope PMC · OpenAlex · checked 15 Sept 2026
Accurate estimates of above-ground tree biomass within forest inventories are essential for calibration and validation of biomass mapping products based on Earth observation data. Terrestrial laser scanning (TLS) enables detailed and non-destructive volume estimation of individual trees, which can be converted to biomass with wood basic density. Existing TLS-based approaches range from simple geometrical features to virtual 3D reconstruction of entire trees. Validating such approaches with weight measurements is a key step before the integration of TLS or other close-range technologies into operational applications such as forest inventories. In this study, we firstly evaluate individual tree volume estimation approaches based on 3D reconstruction through quantitative structure models (QSM) against destructive reference data of 60 trees and compare them to operational allometric scaling models (ASM). Secondly, we determine the explanatory power of TLS-derived geometric parameters regarding total wood, stem, coarse wood and fine branch volume. We observe similar accuracy in merchantable (¿7 cm) wood compartments for ASMs (NRMSE = 25 %) and QSMs (NRMSE = 29 %), with QSMs showing better results for broadleaves than conifers and generally overestimating fine branch volume. Feature selection shows that a combination of stem diameters and volume of convex hulls around tree crowns has the most potential to model the entire tree volume including branches, especially for conifers. In cases where the quality of available point clouds is insufficient for QSMs, 3D information can thus still be utilised by deriving geometric parameters. The integration of crown dimension parameters into new allometric models could substantially improve the estimation of branch wood volume.
Why it matches plant phenotyping methodsTLSによる個体樹木の体積という植物形質の推定手法を、破壊的実測データと比較検証しており、測定・推定法が研究の中心である。
abstractTerrestrial laser scanning (TLS) enables detailed and non-destructive volume estimation of individual trees
Reproduction assets foundThe paper's Data availability statement points to a public EnviDat deposit (DOI 10.16904/envidat.403) containing the data associated with this TLS-based tree volume estimation study, including the TLS point clouds and destructive reference measurements collected in the SwissBiomass project. No author analysis code URL,Dataset · publicvolume by integrating them into new allometric models.
Declaration of competing interest
The authors declare that they have no known competing finan-
cial interests or personal relationships that could have appeared to
influence the work reported in this paper.
Data availability
Data associated with this article is available at http://dx.doi.org/10.16904/envidat.403.Acknowledgements
The authors would like to thank everyone involved in the WSL
project ‘‘SwissBiomass’’, in the course of which the data used in this
study were collected. In particular, we thank Marina Beck for project
coordination, as well as all those who helped with the field and lab-
oratory measurements. We also thank DanielOpen asset ↗envidat · 10.16904/envidat.403pdf-raw-page:11 lines:1-93Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Uprooting caused by flood events is a significant disturbance factor that affects the establishment, growth, and mortality of riparian vegetation. If the hydraulic drag force acting on riparian plants exceeds the peak uprooting force originate from their below-ground portion, it may result in the uprooting of these plants. Despite previous studies have documented and investigated the uprooting processes and factors influencing the peak uprooting force of plants, most of these studies have focused on how the root morphological traits of tree and shrub seedlings affect peak uprooting force or mainly collected data in indoor experiments, which may limit the extrapolation of the results to natural environments. To address these limitations, we assume that the peak uprooting force can be estimated by the morphological traits of the above-ground portion of the vegetation. In this study, we conducted in-situ vertical uprooting tests on three locally dominant species: Conyza canadensis , Daucus carota , and Leonurus sibiricus , in a typical riverine environment. The three species were found to have the highest abundance based on the outcomes of the quadrat method. We measured the peak uprooting force, plant height, stem basal diameter, shoot and root wet biomass, and shoot and root dry biomass of each plant and compared them between species. Furthermore, we quantified the influence of morphology on peak uprooting force. Our results showed significant differences in morphological traits and peak uprooting force among the three species. We found a significant positive correlation between peak uprooting force and the morphological traits of the three species. The peak uprooting force increases with plant size following a power law function which is analogous to allometric equations. The allometric equation provided a convenient and non-destructive method to estimate the peak uprooting force based on the above-ground morphological traits of the plants, which may help to overcome the limitations of measuring root morphological traits.
Why it matches plant phenotyping methods植物の地上部形態から地下部に由来する最大引抜抵抗力を推定する非破壊的なアロメトリック手法を開発・提示しており、形質取得・推定が研究の中心である。
abstractThe allometric equation provided a convenient and non-destructive method to estimate the peak uprooting force based on the above-ground morphological traits of the plants
Reproduction assets foundThe paper's data availability statement points to a public Zenodo deposit (DOI 10.5281/zenodo.6476708) containing the datasets from this study (in-situ uprooting tests and morphological trait measurements of three riparian species). This is a paper-specific, publicly accessible phenotype dataset. No author analysis代码或补Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accessionnumber(s) can be found below: https://doi.org/10.5281/zenodo.6476708 .Open asset ↗zenodo · 10.5281/zenodo.6476708lines:667-709Code / dataset availability confirmedOpenAlex · Crossref · checked 14 Sept 2026
Abstract Digital phenotyping, particularly the use of plant 3D models, is a promising method for high‐throughput plant evaluation. Although many recent studies on the topic have been published, further research is needed to apply it to breeding research and other related fields. In this study, using a 3D model phenotyping system we developed, we reconstructed and analyzed 20 accessions of zoysiagrass (Zoysia spp.), including three species and their hybrid, over a period of 1 year. Artificial neural network with three hidden layers was able to effectively remove nonplant parts while retaining plant parts that were incorrectly removed using the cropping method, offering a robust and flexible approach for post‐processing of 3D models. The system also demonstrated its ability to accurately evaluate a range of traits, including height, area, and color using red green blue (RGB)‐based vegetation indices. The results showed a high correlation between the estimated volume obtained from voxel 3D model and dry weight, enabling its use as a non‐destructive method for measuring plant volume. In addition, we found that the green red normalized difference index from RGB‐based indices was similar to the commonly used normalized difference vegetation index in controlled illumination conditions. These results demonstrate the potential for three‐dimensional model phenotyping to facilitate plant breeding, particularly in the field of turfgrass and feed crops.
Why it matches plant phenotyping methods3Dモデル再構築、ニューラルネットワークによる後処理、RGB形質推定を中核とする植物フェノタイピングシステムの開発・検証研究である。
titleDevelopment of a digital phenotyping system using 3D model reconstruction for zoysiagrass
Reproduction assets foundThe paper's data availability statement explicitly deposits the authors' analysis code on GitHub (sandysan42/Zoysia3DModel), which reproduces the 3D-model-based phenotyping analysis (height, area, color, volume). No public phenotype dataset or trained model checkpoint is stated; supporting information is generic.Code · publicYAPAIBOON ET AL.
AC K N OW L E D G M E N T S
A part of this study is supported by JST CREST grant number
JPMJCR16O1.
C O N F L I C T O F I N T E R E S T S TAT E M E N T
The authors declare no conflicts of interest.
DATA AVA I L A B I L I T Y S TAT E M E N T
Codes used for analysis in this study are openly available on
GitHub at https://github.com/sandysan42/Zoysia3DModel/.O RC I D
SorawichPongpiyapaiboon https://orcid.org/0000-0002-9314-8375
Hidenori Tanaka https://orcid.org/0000-0002-4237-8154
RyoAkashi https://orcid.org/0000-0002-5651-8285
R E F E R E N C E S
Bienert, A., Hess, C., Maas, H.-G., & Von Oheimb, G. (2014). A voxel-
based technique to estimate the volume of trees from terrestriOpen asset ↗sandysan42/Zoysia3DModelpdf-raw-page:10 lines:1-78Code / dataset availability confirmedOpenAlex · checked 13 Sept 2026
Remote-sensing data has become essential for site-specific farming methods. It is also a powerful tool for monitoring the agroecosystem services offered by integrating cover crops (CC) into crop rotations. This study presents a method to determine the canopy height (CH), defined as the average height of the crop stand surface, including tops and gaps, of heterogeneous and multi-species CC using commercial unmanned aerial vehicles (UAVs). Images captured with red–green–blue cameras mounted on UAVs in two missions varying in ground sample distances were used as input for generating three-dimensional point clouds using the structure-from-motion approach. These point clouds were then compared to manual ground measurements. The results showed that the agreement between the methods was closest when CC presented dense and smooth canopies. However, stands with rough canopies or gaps showed substantial differences between the UAV method and ground measurements. We conclude that the UAV method is substantially more precise and accurate in determining CH than measurements taken with a ruler since the UAV introduces additional dimensions with greatly increased resolution. CH can be a reliable indicator of biomass yield, but no differences between the investigated methods were found, probably due to allometric variations of different CC species. We propose the presented UAV method as a promising tool to include site-specific information on CC in crop production strategies.
Why it matches plant phenotyping methodsUAV画像とSfM点群を用いて被覆作物の群落高を推定する手法を提示し、地上測定と比較検証しており、植物形質取得法が研究の中心である。
abstractThis study presents a method to determine the canopy height (CH), defined as the average height of the crop stand surface, including tops and gaps, of heterogeneous and multi-species CC using commercial unmanned aerial vehicles (UAVs).
Reproduction assets foundThe paper's canopy height and biomass measurements (UAV-derived CH, ruler measurements, DMY) are openly available as a Zenodo dataset, explicitly stated in the Data Availability Statement. The Metashape scripts GitHub link and CRAN raster package are generic third-party tools, not authors' analysis code.Dataset · publicData Availability Statement: The data presented in this study are openly available in the Zenodo
archive at the following DOI: https://doi.org/10.5281/zenodo.7713341 (Kümmerer, 2023).Open asset ↗Zenodo · 10.5281/zenodo.7713341pdf-page:15 lines:1-51Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
Recent studies indicate that food demand will increase by 35-56% over the period 2010-2050 due to population increase, economic development, and urbanization. Greenhouse systems allow for the sustainable intensification of food production with demonstrated high crop production per cultivation area. Breakthroughs in resource-efficient fresh food production merging horticultural and AI expertise take place with the international competition "Autonomous Greenhouse Challenge". This paper describes and analyzes the results of the third edition of this competition. The competition's goal is the realization of the highest net profit in fully autonomous lettuce production. Two cultivation cycles were conducted in six high-tech greenhouse compartments with operational greenhouse decision-making realized at a distance and individually by algorithms of international participating teams. Algorithms were developed based on time series sensor data of the greenhouse climate and crop images. High crop yield and quality, short growing cycles, and low use of resources such as energy for heating, electricity for artificial light, and CO 2 were decisive in realizing the competition's goal. The results highlight the importance of plant spacing and the moment of harvest decisions in promoting high crop growth rates while optimizing greenhouse occupation and resource use. In this paper, images taken with depth cameras (RealSense) for each greenhouse were used by computer vision algorithms (Deepabv3+ implemented in detectron2 v0.6) in deciding optimum plant spacing and the moment of harvest. The resulting plant height and coverage could be accurately estimated with an R 2 of 0.976, and a mIoU of 98.2, respectively. These two traits were used to develop a light loss and harvest indicator to support remote decision-making. The light loss indicator could be used as a decision tool for timely spacing. Several traits were combined for the harvest indicator, ultimately resulting in a fresh weight estimation with a mean absolute error of 22 g. The proposed non-invasively estimated indicators presented in this article are promising traits to be used towards full autonomation of a dynamic commercial lettuce growing environment. Computer vision algorithms act as a catalyst in remote and non-invasive sensing of crop parameters, decisive for automated, objective, standardized, and data-driven decision making. However, spectral indexes describing lettuces growth and larger datasets than the currently accessible are crucial to address existing shortcomings between academic and industrial production systems that have been encountered in this work.
Why it matches plant phenotyping methods深度カメラ画像とコンピュータビジョンによりレタスの草丈・被覆率・収量関連形質を推定し、精度評価と自動意思決定指標への応用を行っており、植物表現型取得法が中心である。
abstractimages taken with depth cameras (RealSense) for each greenhouse were used by computer vision algorithms (Deepabv3+ implemented in detectron2 v0.6) in deciding optimum plant spacing and the moment of harvest.
Reproduction assets foundThe paper's complete challenge dataset (climate time-series and annotated lettuce crop images used for the computer vision phenotyping) is published open access on 4TU.ResearchData, cited both in the Data Availability Statement and in reference 56.Dataset · public3rd Autonomous Greenhouse Challenge-Real Challenge Data Climate and Images Dataset: 4TU.ResearchData 2023 Available online: https://data.4tu.nl/articles/dataset/3rd_Autonomous_Greenhouse_Challenge_Online_Challenge_Lettuce_Images/15023088Open asset ↗4TU.ResearchData · 15023088lines:853-968Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
A monitoring of apple fruit, shoot and trunk growth was performed on 15 trees, equally split according to three treatments, which determined heavily contrasting carbon assimilate availability: unmanipulated trees (FRU), thinned trees (THI) and defruited trees (DEF). Several variables describe the vegetative growth on FRU and DEF trees (shoot length, base diameter, number of fruits on shoot, and height, diameter, pruning intensity and number of fruits of the branch carrying the shoot; trunk circumference), as well as the fruit growth on FRU and THI trees (3 fruit diameters). Additional measurements from ancillary shoots (apical diameter, number of leaves, leaf dry weight, stem dry weight, fresh mass, volume) and fruits (3 diameters, dry weight) from trees undergoing the same treatments, provide a more complete (destructive) characterization of organs growth, thanks to several measurements performed across the growing season. Organs are provided with categorical variables indicating the treatment, tree, canopy height, orientation (for both shoots and fruit), as well as branch and shoot identifiers, so that hierarchical modeling of the dataset can be performed. The dataset is completed with dates and day of the year of the measurements and the accumulated growing degree days from full bloom. Data can be used to calculate apple tree absolute and relative growth rates, maximum potential growth rates, as well as shoot growth responses to thinning and pruning. The dataset can also be used to calibrate allometric relationships, estimate structural apple tree growth parameters and their variability.
Why it matches plant phenotyping methodsリンゴ器官の成長形質を階層的・反復的に収録した再利用可能なデータセットであり、成長率やアロメトリーの推定・モデル較正に用いるデータ資源として方法論的価値がある。
titleA hierarchical dataset of vegetative and reproductive growth in apple tree organs under conventional and non-limited carbon resources.
Reproduction assets foundThe paper is a Data in Brief article describing its own apple tree growth phenotype dataset (shoot, fruit, trunk measurements) deposited publicly on Mendeley Data with DOI 10.17632/852r5dnzd5.1 and a direct URL. This is a paper-specific, public, actionable phenotype dataset.Dataset · publiccommercial orchard
City: Caldaro, Bolzano/Bozen province, Trentino Alto Adige region
Country: Italy
Latitude and longitude collected samples/data: 46° 21’ N, 11° 16’ E, Altitude 240 m
Period: May-November 2014
Data accessibility
Repository name: Mendeley Data
Data identification number: 10.17632/852r5dnzd5.1
Direct URL to data: https://data.mendeley.com/datasets/852r5dnzd5/1
Related research article
F. Reyes, T. DeJong, P. Franceschi, M. Tagliavini, D. Gianelle, Maximum growth potential and periods of resource limitation in apple tree, Frontiers in Plant Science 7 (2016). doi: 10.3389/fpls.2016.00233
Value of the Data
•
The dataset allows analysis of the impact of fruit load, on vegetative aOpen asset ↗Mendeley Data · 10.17632/852r5dnzd5.1lines:1-61Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Viruses are key players in marine ecosystems where they infect abundant marine microbes. RNA viruses are emerging as key members of the marine virosphere. They have recently been identified as a potential source of mortality in diatoms, a group of microalgae that accounts for roughly 40% of the primary production in the ocean. Despite their likely importance, their impacts on host populations and ecosystems remain difficult to assess. In this study, we introduce an innovative approach that combines automated 3D confocal microscopy with quantitative image analysis and physiological measurements to expand our understanding of viral infection. We followed different stages of infection of the bloom-forming diatom Guinardia delicatula by the RNA virus GdelRNAV-04 until the complete lysis of the host. From 20h after infection, we observed quantifiable changes in subcellular host morphology and biomass. Our microscopy monitoring also showed that viral infection of G. delicatula induced the formation of auxospores as a probable defense strategy against viruses. Our method enables the detection of discriminative morphological features on the subcellular scale and at high throughput for comparing populations, making it a promising approach for the quantification of viral infections in the field in the future.
Why it matches plant phenotyping methods自動3D共焦点顕微鏡と定量画像解析を組み合わせ、感染に伴う珪藻の細胞形態・バイオマスを高スループットに定量する手法が研究の中心である。
abstractwe introduce an innovative approach that combines automated 3D confocal microscopy with quantitative image analysis and physiological measurements
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe full annotated script can be found on https://github.com/mariescopy/Guinardia_ViralInfectionOpen asset ↗mariescopy/Guinardia_ViralInfectionlines:286-318Code / dataset availability confirmedCrossref · checked 13 Sept 2026
Abstract. Understanding mechanisms of tree mortality and geometric patterns of canopy gaps is relevant for robust estimates of carbon stocks and balance in tropical forests, and for assessing how they are responding to climate change. We combined monthly RGB images acquired from an unmanned aerial vehicle with field surveys to identify gaps in an 18-ha permanent plot in an old-growth Central Amazon forest over a period of 28 months. In addition to detecting, we measured the size and shape of gaps, and analyzed their temporal variation and correlation with rainfall. We further described associated modes of tree mortality or branch fall and quantified associated losses of biomass. Overall, the sensitivity of gap detection differed between field surveys and imagery data. In total, we detected 32 gaps either in the images and field, ranging in area from 9 m2 to 835 m2. Relatively small gaps (
Why it matches plant phenotyping methodsUAV画像とフィールド調査を用いて森林キャノピーギャップを検出・定量化し、検出感度を比較しており、植物群落の構造状態を測定する方法の適用・検証が中心的です。
abstractWe combined monthly RGB images acquired from an unmanned aerial vehicle with field surveys to identify gaps
Reproduction assets foundThe paper's R analysis code is publicly archived on Zenodo (10.5281/zenodo.8298693), and the supporting lidar data are openly available on Zenodo (10.5281/zenodo.7636454). Other data (UAV imagery, field gap measurements) are only available upon request from the co-authors.Dataset · publiccoverage, relatively short revisiting time and long data se- available at https://doi.org/10.5281/zenodo.7636454 (Ometto et al.,Open asset ↗Zenodo · 10.5281/zenodo.7636454pdf-page:12 lines:1-50Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · checked 15 Sept 2026
Current methods of root sampling typically only obtain small or incomplete sections of root systems and do not capture their true complexity. To facilitate the visualization and analysis of full-sized plant root systems in 3-dimensions, we developed customized mesocosm growth containers. While highly scalable, the design presented here uses an internal volume of 45 ft 3 (1.27 m 3 ), suitable for large crop and bioenergy grass root systems to grow largely unconstrained. Furthermore, they allow for the excavation and preservation of 3-dimensional root system architecture (RSA), and facilitate the collection of time-resolved subterranean environmental data. Sensor arrays monitoring matric potential, temperature and CO 2 levels are buried in a grid formation at various depths to assess environmental fluxes at regular intervals. Methods of 3D data visualization of fluxes were developed to allow for comparison with root system architectural traits. Following harvest, the recovered root system can be digitally reconstructed in 3D through photogrammetry, which is an inexpensive method requiring only an appropriate studio space and a digital camera. We developed a pipeline to extract features from the 3D point clouds, or from derived skeletons that include point cloud voxel number as a proxy for biomass, total root system length, volume, depth, convex hull volume and solidity as a function of depth. Ground-truthing these features with biomass measurements from manually dissected root systems showed a high correlation. We evaluated switchgrass, maize, and sorghum root systems to highlight the capability for species wide comparisons. We focused on two switchgrass ecotypes, upland (VS16) and lowland (WBC3), in identical environments to demonstrate widely different root system architectures that may be indicative of core differences in their rhizoeconomic foraging strategies. Finally, we imposed a strong physiological water stress and manipulated the growth medium to demonstrate whole root system plasticity in response to environmental stimuli. Hence, these new "3D Root Mesocosms" and accompanying computational analysis provides a new paradigm for study of mature crop systems and the environmental fluxes that shape them.
Why it matches plant phenotyping methods3Dルートメソコスム、フォトグラメトリ、点群解析による根系形態形質の取得・検証が研究の中心であり、植物フェノタイピング手法に該当する。
abstractTo facilitate the visualization and analysis of full-sized plant root systems in 3-dimensions, we developed customized mesocosm growth containers.
Reproduction assets foundThe paper's supplementary videos on figshare are photogrammetry-generated 3D point clouds of the paper's own root system phenotyping measurements (sorghum, maize, and switchgrass root systems, including stress-conditioned and sensor-flux coaligned visualizations), publicly downloadable. The OpenCV link is a generic, unDataset · publice, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Supplementary material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2022.1041404/full#supplementary-material . Videos can be found for viewing and download at https://doi.org/10.6084/m9.figshare.21335898.v1 .
Supplementary Figure 1
Interpolation of 3-dimensional environmental sensor data.
Click here for additional data file.
Supplementary Figure 2
Time course of shoot morphological responses of switchgrass in different growth media.
Click here for additional data file.
Supplementary Figure 3
Manual post-process cleaning of Open asset ↗figshare · 10.6084/m9.figshare.21335898.v1lines:327-356Code / dataset availability confirmedOpenAlex · Europe PMC · checked 8 Sept 2026
Unmanned aerial vehicles (UAVs) are powerful tools for monitoring crops for high-throughput phenotyping. Time-series aerial photography of fields can record the whole process of crop growth. Canopy height (CH), which is vertical plant growth, has been used as an indicator for the evaluation of lodging tolerance and the prediction of biomass and yield. However, there have been few attempts to use UAV-derived time-series CH data for field testing of crop lines. Here we provide a novel framework for trait prediction using CH data in rice. We generated UAV-based digital surface models of crops to extract CH data of 30 Japanese rice cultivars in 2019, 2020, and 2021. CH-related parameters were calculated in a non-linear time-series model as an S-shaped plant growth curve. The maximum saturation CH value was the most important predictor for culm length. The time point at the maximum CH contributed to the prediction of days to heading, and was able to predict stem and leaf weight and aboveground weight, possibly reflecting the association of biomass with duration of vegetative growth. These results indicate that the CH-related parameters acquired by UAV can be useful as predictors of traits typically measured by hand.
Why it matches plant phenotyping methodsUAV画像から作物のキャノピー高を抽出し、時系列モデルで生育・形質を予測する枠組みが研究の中心であり、実質的な植物フェノタイピング手法の開発・適用に該当する。
abstractHere we provide a novel framework for trait prediction using CH data in rice.
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 1 ) in 2019, 2020, and 2021 from the aspect of genetics and examined how to use the CH data for the prediction of traits usually measured by hand ( Figure 1 ).Open asset ↗lines:342-376Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
This article describes a dataset of high-resolution visible-spectrum images of safflower ( Carthamus tinctorius L.) plants obtained from a LemnaTec Scanalyser automated phenomics platform along with the associated image analysis output and manually acquired biomass data. This series contains 1832 images of 200 diverse safflower genotypes, acquired at the Plant Phenomics Victoria, Horsham, Victoria, Australia. Two Prosilica GT RGB (red-green-blue) cameras were used to generate 6576 × 4384 pixel portable network graphic (PNG) images. Safflower genotypes were either subjected to a salt treatment (250 mM NaCl) or grown as a control (0 mM NaCl) and imaged daily from 15 to 36 days after sowing. Each snapshot consists of four images collected at a point in time; one of which is taken from above (top-view) and the remainder from the side at either 0°, 120° or 240°. The dataset also includes analysis output quantifying traits and describing phenotypes, as well as manually collected biomass and leaf ion content data. The usage of the dataset is already demonstrated in Thoday-Kennedy et al. (2021) [1]. This dataset describes the early growth differences of diverse safflower genotypes and identified genotypes tolerant or susceptible to salinity stress. This dataset provides detailed image analysis parameters for phenotyping a large population of safflower that can be used for the training of image-based trait identification pipelines for a wide range of crop species.
Why it matches plant phenotyping methods高スループット画像データセットと画像解析出力、形質定量パラメータを提供しており、植物フェノタイピング手法・再利用可能なデータ資源が中心である。
abstractThis article describes a dataset of high-resolution visible-spectrum images of safflower ( Carthamus tinctorius L.) plants obtained from a LemnaTec Scanalyser automated phenomics platform along with the associated image analysis output and manually acquired biomass data.
Reproduction assets foundThe paper is itself a data descriptor for a public safflower salt-response phenotyping dataset (1832 RGB images, image analysis output, and manual biomass/ion data) deposited on Harvard Dataverse, with an explicit direct URL.Dataset · publicains Innovation Park, Agriculture Victoria, Department of Jobs, Precincts and Regions.
City/Town/Region: Horsham, Victoria, Australia
Latitude and longitude (and GPS coordinates, if possible) for collected samples/data: 36° 43’ 13.67” S, 142° 10’ 25.63” E
Data accessibility
Repository name: Harvard Dataverse
Direct URL to data: https://dataverse.harvard.edu/dataverse/H2018006
Related research article
E. Thoday-Kennedy, S. Joshi, H.D. Daetwyler, M. Hayden, D. Hudson, G. Spangenberg, S. Kant, Digital phenotyping to delineate salinity response in safflower genotypes, Frontiers in Plant Science (2021) 12 , 1196
https://doi.org/10.3389/fpls.2021.662498
Value of the Data
•
This dataset is a collecOpen asset ↗Harvard Dataverse · H2018006lines:50-109Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 8 Sept 2026
Plant height (PH) is an essential trait in maize (Zea mays) that is tightly associated with planting density, biomass, lodging resistance, and grain yield in the field. Dissecting the dynamics of maize plant architecture will be beneficial for ideotype-based maize breeding and prediction, as the genetic basis controlling PH in maize remains largely unknown. In this study, we developed an automated high-throughput phenotyping platform (HTP) to systematically and noninvasively quantify 77 image-based traits (i-traits) and 20 field traits (f-traits) for 228 maize inbred lines across all developmental stages. Time-resolved i-traits with novel digital phenotypes and complex correlations with agronomic traits were characterized to reveal the dynamics of maize growth. An i-trait-based genome-wide association study identified 4945 trait-associated SNPs, 2603 genetic loci, and 1974 corresponding candidate genes. We found that rapid growth of maize plants occurs mainly at two developmental stages, stage 2 (S2) to S3 and S5 to S6, accounting for the final PH indicators. By integrating the PH-association network with the transcriptome profiles of specific internodes, we revealed 13 hub genes that may play vital roles during rapid growth. The candidate genes and novel i-traits identified at multiple growth stages may be used as potential indicators for final PH in maize. One candidate gene, ZmVATE, was functionally validated and shown to regulate PH-related traits in maize using genetic mutation. Furthermore, machine learning was used to build predictive models for final PH based on i-traits, and their performance was assessed across developmental stages. Moderate, strong, and very strong correlations between predictions and experimental datasets were achieved from the early S4 (tenth-leaf) stage. Colletively, our study provides a valuable tool for dissecting the spatiotemporal formation of specific internodes and the genetic architecture of PH, as well as resources and predictive models that are useful for molecular design breeding and predicting maize varieties with ideal plant architectures.
Why it matches plant phenotyping methods自動化された高スループット画像表現型プラットフォームを開発し、77種類の画像形質を定量化・検証し、機械学習による草丈予測も評価しており、表現型取得・抽出法が研究の中心である。
abstractwe developed an automated high-throughput phenotyping platform (HTP) to systematically and noninvasively quantify 77 image-based traits (i-traits) and 20 field traits (f-traits) for 228 maize inbred lines across all developmental stages.
Reproduction assets foundThe paper explicitly states that all images and phenotypic data are available on figshare and that the HTP/RGB image and GWAS analysis pipeline code is available on the authors' GitHub repository (maizeHTP). Both are paper-specific, public, and actionable.Dataset · publicAll the images and phenotypic data are available at https://figshare.com/account/home#/projects/141743 .Open asset ↗figshare · projects/141743lines:168-200Code · publicThe code for HTP from LemnaTec and the code for the RGB image and GWAS analysis pipelines can be downloaded at https://github.com/GUOWEIJUN/maizeHTP .Open asset ↗GitHub · GUOWEIJUN/maizeHTPlines:168-200Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 14 Sept 2026
High temperatures inhibit plant growth. A proposed strategy for improving plant productivity under elevated temperatures is the use of plant growth-promoting rhizobacteria (PGPR). While the effects of PGPR on plant shoots have been extensively explored, roots—particularly their spatial and temporal dynamics—have been hard to study, due to their below-ground nature. Here, we characterized the time- and tissue-specific morphological changes in bacterized plants using a novel non-invasive high-resolution plant phenotyping and imaging platform—GrowScreen-Agar II. The platform uses custom-made agar plates, which allow air exchange to occur with the agar medium and enable the shoot to grow outside the compartment. The platform provides light protection to the roots, the exposure of it to the shoots, and the non-invasive phenotyping of both organs. Arabidopsis thaliana, co-cultivated with Paraburkholderia phytofirmans PsJN at elevated and ambient temperatures, showed increased lengths, growth rates, and numbers of roots. However, the magnitude and direction of the growth promotion varied depending on root type, timing, and temperature. The root length and distribution per depth and according to time was also influenced by bacterization and the temperature. The shoot biomass increased at the later stages under ambient temperature in the bacterized plants. The study offers insights into the timing of the tissue-specific, PsJN-induced morphological changes and should facilitate future molecular and biochemical studies on plant–microbe–environment interactions.
Why it matches plant phenotyping methodsGrowScreen-Agar IIという非侵襲的な高解像度フェノタイピング・イメージングプラットフォームを用い、根とシュートの形態を時空間的に測定することが研究の中心的手法です。
abstractwe characterized the time- and tissue-specific morphological changes in bacterized plants using a novel non-invasive high-resolution plant phenotyping and imaging platform—GrowScreen-Agar II.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/plants11212927/s1 , Figure S1: WinRhizo analyzed root lengths and root and shoot biomass; Figure S2: Root sampling and bacterial colonization confirmation; Figure S3: Sample root images generated by the GrowScreen-Agar II; Figure S4: Agar plates for GrowScreen-Agar II; Figure S5: Magazines for GrowScreen-Agar II; Figure S6: Imaging station of GrowScreen-Agar II; Table S1: Mean values and standard error of different root type morphological traits; Table S2: Mean values and standard error of different root system traits describing distribution and spread.Open asset ↗lines:106-120Code / dataset availability confirmedEurope PMC · Crossref · checked 15 Sept 2026
Crop fresh weight and leaf area are considered non-destructive growth factors due to their direct relation to vegetative growth and carbon assimilation. Several methods to measure these parameters have been introduced; however, measuring these parameters using the existing methods can be difficult. Therefore, a non-destructive measurement method with high versatility is essential. The objective of this study was to establish a non-destructive monitoring system for estimating the fresh weight and leaf area of trellised crops. The data were collected from a greenhouse with sweet peppers ( Capsicum annuum var. annuum ); the target growth factors were the crop fresh weight and leaf area. The crop fresh weight was estimated based on the total system weight and volumetric water content using a simple formula. The leaf area was estimated using top-view images of the crops and a convolutional neural network (ConvNet). The estimated crop fresh weight and leaf area exhibited average R 2 values of 0.70 and 0.95, respectively. The simple calculation was able to avoid overfitting with fewer limitations compared with the previous study. ConvNet was able to analyze raw images and evaluate the leaf area without additional sensors and features. As the simple calculation and ConvNet could adequately estimate the target growth factors, the monitoring system can be used for data collection in practice owing to its versatility. Therefore, the proposed monitoring system can be widely applied for diverse data analyses.
Why it matches plant phenotyping methods作物の生体重と葉面積を非破壊推定する計測システムの開発が中心であり、画像とCNNによる形質抽出および検証を行っている。
abstractTherefore, a non-destructive measurement method with high versatility is essential.
Reproduction assets foundThe paper's Supplementary Materials (hosted by MDPI at the allowed URL) explicitly contain sample crop images used as phenotyping inputs, trained-model validation results, model architectures, training parameters, and leaf-area regression coefficients — directly reproducing this paper's fresh-weight and leaf-area phenySupplement · publicowth can be found in the raw data containing changes in the image and weight. Therefore, a monitoring system that can collect both factors can be widely applied for data analyses, such as machine learning, crop modeling, and data standardization.
Supplementary Materials
The following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/s22207728/s1 , Figure S1: Sample images collected from the camera. Images were cropped and resized into 128 × 128, and the resized images were augmented using flipping and shifting; Figure S2: Validation accuracies of the trained deep learning models for estimating the calculated fresh weight.; Figure S3: Validation accuracy of theOpen asset ↗lines:129-147Code / dataset availability confirmedarXiv · OpenAlex · checked 14 Sept 2026
We propose a novel hybrid cable-based robot with manipulator and camera for high-accuracy, medium-throughput plant monitoring in a vertical hydroponic farm and, as an example application, demonstrate non-destructive plant mass estimation. Plant monitoring with high temporal and spatial resolution is important to both farmers and researchers to detect anomalies and develop predictive models for plant growth. The availability of high-quality, off-the-shelf structure-from-motion (SfM) and photogrammetry packages has enabled a vibrant community of roboticists to apply computer vision for non-destructive plant monitoring. While existing approaches tend to focus on either high-throughput (e.g. satellite, unmanned aerial vehicle (UAV), vehicle-mounted, conveyor-belt imagery) or high-accuracy/robustness to occlusions (e.g. turn-table scanner or robot arm), we propose a middle-ground that achieves high accuracy with a medium-throughput, highly automated robot. Our design pairs the workspace scalability of a cable-driven parallel robot (CDPR) with the dexterity of a 4 degree-of-freedom (DoF) robot arm to autonomously image many plants from a variety of viewpoints. We describe our robot design and demonstrate it experimentally by collecting daily photographs of 54 plants from 64 viewpoints each. We show that our approach can produce scientifically useful measurements, operate fully autonomously after initial calibration, and produce better reconstructions and plant property estimates than those of over-canopy methods (e.g. UAV). As example applications, we show that our system can successfully estimate plant mass with a Mean Absolute Error (MAE) of 0.586g and, when used to perform hypothesis testing on the relationship between mass and age, produces p-values comparable to ground-truth data (p=0.0020 and p=0.0016, respectively).
Why it matches plant phenotyping methods植物の多視点画像取得、SfM再構成、質量推定を中核とするロボット型フェノタイピング手法の開発・実証であり、単なる生物学的測定ではない。
abstractWe describe our robot design and demonstrate it experimentally by collecting daily photographs of 54 plants from 64 viewpoints each.
Monitoring within-field crop variability at fine spatial and temporal resolution can assist farmers in making reliable decisions during their agricultural management; however, it traditionally involves a labor-intensive and time-consuming pointwise manual process. To the best of our knowledge, few studies conducted a comparison of Sentinel-2 with UAV data for crop monitoring in the context of precision agriculture. Therefore, prospects of crop monitoring for characterizing biophysical plant parameters and leaf nitrogen of wheat and barley crops were evaluated from a more practical viewpoint closer to agricultural routines. Multispectral UAV and Sentinel-2 imagery was collected over three dates in the season and compared with reference data collected at 20 sample points for plant leaf nitrogen (N), maximum plant height, mean plant height, leaf area index (LAI), and fresh biomass. Higher correlations of UAV data to the agronomic parameters were found on average than with Sentinel-2 data with a percentage increase of 6.3% for wheat and 22.2% for barley. In this regard, VIs calculated from spectral bands in the visible part performed worse for Sentinel-2 than for the UAV data. In addition, large-scale patterns, formed by the influence of an old riverbed on plant growth, were recognizable even in the Sentinel-2 imagery despite its much lower spatial resolution. Interestingly, also smaller features, such as the tramlines from controlled traffic farming (CTF), had an influence on the Sentinel-2 data and showed a systematic pattern that affected even semivariogram calculation. In conclusion, Sentinel-2 imagery is able to capture the same large-scale pattern as can be derived from the higher detailed UAV imagery; however, it is at the same time influenced by management-driven features such as tramlines, which cannot be accurately georeferenced. In consequence, agronomic parameters were better correlated with UAV than with Sentinel-2 data. Crop growers as well as data providers from remote sensing services may take advantage of this knowledge and we recommend the use of UAV data as it gives additional information about management-driven features. For future perspective, we would advise fusing UAV with Sentinel-2 imagery taken early in the season as it can integrate the effect of agricultural management in the subsequent absence of high spatial resolution data to help improve crop monitoring for the farmer and to reduce costs.
Why it matches plant phenotyping methodsUAVおよびSentinel-2マルチスペクトル画像から草丈、LAI、バイオマス、葉窒素などの植物形質を推定し、参照データとの相関比較・技術評価を行っているため、植物フェノタイピング手法の検証・応用が中心です。
abstractprospects of crop monitoring for characterizing biophysical plant parameters and leaf nitrogen of wheat and barley crops were evaluated
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicSupplementary Materials: The following supporting information can be downloaded at:
https://www.mdpi.com/article/10.3390/rs14174426/s1, Table S1: Summary statistics of the plant trait
variables measured at 20 sample points in field A; Table S2: Summary statistics of the plant trait
variables measured at 20 sample points in field G; Table S3: Absolute correlation results of plant
maximum height and mean height in field AOpen asset ↗pdf-page:20 lines:1-58Code / dataset availability confirmedEurope PMC · OpenAlex · checked 13 Sept 2026
Growth traits, such as fresh weight, diameter, and leaf area, are pivotal indicators of growth status and the basis for the quality evaluation of lettuce. The time-consuming, laborious and inefficient method of manually measuring the traits of lettuce is still the mainstream. In this study, a three-stage multi-branch self-correcting trait estimation network (TMSCNet) for RGB and depth images of lettuce was proposed. The TMSCNet consisted of five models, of which two master models were used to preliminarily estimate the fresh weight (FW), dry weight (DW), height (H), diameter (D), and leaf area (LA) of lettuce, and three auxiliary models realized the automatic correction of the preliminary estimation results. To compare the performance, typical convolutional neural networks (CNNs) widely adopted in botany research were used. The results showed that the estimated values of the TMSCNet fitted the measurements well, with coefficient of determination ( R 2 ) values of 0.9514, 0.9696, 0.9129, 0.8481, and 0.9495, normalized root mean square error (NRMSE) values of 15.63, 11.80, 11.40, 10.18, and 14.65% and normalized mean squared error (NMSE) value of 0.0826, which was superior to compared methods. Compared with previous studies on the estimation of lettuce traits, the performance of the TMSCNet was still better. The proposed method not only fully considered the correlation between different traits and designed a novel self-correcting structure based on this but also studied more lettuce traits than previous studies. The results indicated that the TMSCNet is an effective method to estimate the lettuce traits and will be extended to the high-throughput situation. Code is available at https://github.com/lxsfight/TMSCNet.git.
Why it matches plant phenotyping methodsRGB・深度画像からレタスの複数形質を推定する新規ネットワークを開発し、既存手法と性能比較しており、植物フェノタイピング手法が研究の中心である。
abstracta three-stage multi-branch self-correcting trait estimation network (TMSCNet) for RGB and depth images of lettuce was proposed
Reproduction assets foundThe paper uses the public Autonomous Greenhouses Challenge 3 dataset (RGB/depth lettuce images with FW/DW/H/D/LA measurements) and states author code availability on GitHub.Code · publicCode is available at https://github.com/lxsfight/TMSCNet.git .Open asset ↗github.com/lxsfight/TMSCNetlines:1-41Code / dataset availability confirmedEurope PMC · OpenAlex · checked 8 Sept 2026
Fresh weight is a widely used growth indicator for quantifying crop growth. Traditional fresh weight measurement methods are time-consuming, laborious, and destructive. Non-destructive measurement of crop fresh weight is urgently needed in plant factories with high environment controllability. In this study, we proposed a multi-modal fusion based deep learning model for automatic estimation of lettuce shoot fresh weight by utilizing RGB-D images. The model combined geometric traits from empirical feature extraction and deep neural features from CNN. A lettuce leaf segmentation network based on U-Net was trained for extracting leaf boundary and geometric traits. A multi-branch regression network was performed to estimate fresh weight by fusing color, depth, and geometric features. The leaf segmentation model reported a reliable performance with a mIoU of 0.982 and an accuracy of 0.998. A total of 10 geometric traits were defined to describe the structure of the lettuce canopy from segmented images. The fresh weight estimation results showed that the proposed multi-modal fusion model significantly improved the accuracy of lettuce shoot fresh weight in different growth periods compared with baseline models. The model yielded a root mean square error (RMSE) of 25.3 g and a coefficient of determination ( R 2 ) of 0.938 over the entire lettuce growth period. The experiment results demonstrated that the multi-modal fusion method could improve the fresh weight estimation performance by leveraging the advantages of empirical geometric traits and deep neural features simultaneously.
Why it matches plant phenotyping methodsRGB-D画像からレタスの生体重を非破壊推定する画像解析・深層学習手法の開発が研究の中心であり、植物表現型取得法に該当する。
abstractA lettuce leaf segmentation network based on U-Net was trained for extracting leaf boundary and geometric traits.
Reproduction assets foundThe paper's phenotyping inputs (top-view RGB and aligned depth images of 388 lettuces with destructively measured traits) come from the publicly available 3rd Autonomous Greenhouse Challenge Online Challenge Lettuce Images dataset, with an explicit public URL in the data availability statement. No author analysis code,Dataset · publicPublicly available datasets were analyzed in this study. This data can be found here: https://data.4tu.nl/articles/dataset/3rd_Autonomous_Greenhouse_Challenge_Online_Challenge_Lettuce_Images/15023088 .Open asset ↗data.4tu.nl · 15023088lines:657-691Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
Multispectral (MS) imaging enables the measurement of characteristics important for increasing the prediction accuracy of genotypic and phenotypic values for yield-related traits. In this study, we evaluated the potential application of temporal MS imaging for the prediction of aboveground biomass (AGB) in soybean [Glycine max (L.) Merr.]. Field experiments with 198 accessions of soybean were conducted with four different irrigation levels. Five vegetation indices (VIs) were calculated using MS images from soybean canopies from early vegetative to early reproductive stage. To predict the genotypic values of AGB, VIs at the different growth stages were used as secondary traits in a multitrait genomic prediction. The prediction accuracy of the genotypic values of AGB from MS and genomic data largely outperformed that of the genomic data alone before the flowering stage (90% of accessions did not flower), suggesting that it would be possible to determine cross-combinations based on the predicted genotypic values of AGB. We compared the prediction accuracy of a model using the five VIs and a model using only one VI to predict the phenotypic values of AGB and found that the difference in prediction accuracy decreased over time at all irrigation levels except for the most severe drought. The difference in the most severe drought was not as small as that in the other treatments. Only the prediction accuracy of a model using the five VIs in the most severe droughts gradually increased over time. Therefore, the optimal timing for MS imaging may depend on the irrigation levels.
Why it matches plant phenotyping methods大豆の地上部バイオマスを推定するための時系列マルチスペクトル画像と植生指数を中心に、予測精度および撮像時期を評価しているため、植物表現型計測手法の実質的な適用・検証に該当する。
abstractMultispectral (MS) imaging enables the measurement of characteristics important for increasing the prediction accuracy of genotypic and phenotypic values for yield-related traits.
Reproduction assets foundThe paper's data availability statement points to a public GitHub repository containing the datasets generated and analyzed (phenotype/vegetation-index data and analysis materials) for this soybean multispectral imaging study. Supplemental files are only docx summaries, not datasets themselves.Dataset · publicThe datasets generated and analyzed in the present study are available from the ‘Sakuraikengo/TSMS_supple’ repository in the GitHub, https://github.com/Sakuraikengo/TSMS_supple.Open asset ↗Sakuraikengo/TSMS_supplehtml-lines:718-899Code / dataset availability confirmedEurope PMC · OpenAlex · checked 13 Sept 2026
Growth indices can quantify crop productivity and establish optimal environmental, nutritional, and irrigation control strategies. A convolutional neural network (CNN)-based model is presented for estimating various growth indices (i.e., fresh weight, dry weight, height, leaf area, and diameter) of four varieties of greenhouse lettuce using red, green, blue, and depth (RGB-D) data obtained using a stereo camera. Data from an online autonomous greenhouse challenge (Wageningen University, June 2021) were employed in this study. The data were collected using an Intel RealSense D415 camera. The developed model has a two-stage CNN architecture based on ResNet50V2 layers. The developed model provided coefficients of determination from 0.88 to 0.95, with normalized root mean square errors of 6.09%, 6.30%, 7.65%, 7.92%, and 5.62% for fresh weight, dry weight, height, diameter, and leaf area, respectively, on unknown lettuce images. Using red, green, blue (RGB) and depth data employed in the CNN improved the determination accuracy for all five lettuce growth indices due to the ability of the stereo camera to extract height information on lettuce. The average time for processing each lettuce image using the developed CNN model run on a Jetson SUB mini-PC with a Jetson Xavier NX was 0.83 s, indicating the potential for the model in fast real-time sensing of lettuce growth indices.
Why it matches plant phenotyping methodsRGB-D画像とCNNを用いてレタスの複数の生育形質を推定する手法を開発・検証しており、表現型取得が研究の中心である。
abstractA convolutional neural network (CNN)-based model is presented for estimating various growth indices (i.e., fresh weight, dry weight, height, leaf area, and diameter) of four varieties of greenhouse lettuce using red, green, blue, and depth (RGB-D) data obtained using a stereo camera.
Reproduction assets foundThe paper's phenotyping inputs (388 RGB-D lettuce image pairs with destructive growth-index measurements from the Third Autonomous Greenhouse Challenge) are a third-party public dataset explicitly stated to be publicly available at 4TU.ResearchData, with the DOI 10.4121/15023088.v1 cited in the text and figure captionsDataset · publicThe dataset is available in online: https://doi.org/10.4121/15023088.v1 [ 30 ].Open asset ↗10.4121/15023088.v1lines:518-697Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
The rapid development of high-throughput phenotypic detection techniques makes it possible to obtain a large number of crop phenotypic information quickly, efficiently, and accurately. Among them, image-based phenotypic acquisition method has been widely used in crop phenotypic identification and characteristic research due to its characteristics of automation, non-invasive, non-destructive and high throughput. In this study, we proposed a method to define and analyze the traits related to leaf sheaths including morphology-related, color-related and biomass-related traits at V6 stage. Next, we analyzed the phenotypic variation of leaf sheaths of 418 maize inbred lines based on 87 leaf sheath-related phenotypic traits. In order to further analyze the mechanism of leaf sheath phenotype formation, 25 key traits (2 biomass-related, 19 morphology-related and 4 color-related traits) with heritability greater than 0.3 were analyzed by genome-wide association studies (GWAS). And 1816 candidate genes of 17 whole plant leaf sheath traits and 1,297 candidate genes of 8 sixth leaf sheath traits were obtained, respectively. Among them, 46 genes with clear functional descriptions were annotated by single nucleotide polymorphism (SNPs) that both Top1 and multi-method validated. Functional enrichment analysis results showed that candidate genes of leaf sheath traits were enriched into multiple pathways related to cellular component assembly and organization, cell proliferation and epidermal cell differentiation, and response to hunger, nutrition and extracellular stimulation. The results presented here are helpful to further understand phenotypic traits of maize leaf sheath and provide a reference for revealing the genetic mechanism of maize leaf sheath phenotype formation.
Why it matches plant phenotyping methods画像ベースのハイスループット表現型取得と葉鞘形質の定義・解析手法が明示され、418系統から多数の再利用可能な植物形質を取得しているため、手法が中心的である。
abstractwe proposed a method to define and analyze the traits related to leaf sheaths including morphology-related, color-related and biomass-related traits at V6 stage.
Abstract. Grasslands are an important part of pre-Alpine and Alpine landscapes. Despite the economic value and the significant role of grasslands in carbon and nitrogen (N) cycling, spatially explicit information on grassland biomass and quality is rarely available. Remotely sensed data from unmanned aircraft systems (UASs) and satellites might be an option to overcome this gap. Our study aims to investigate the potential of low-cost UAS-based multispectral sensors for estimating above-ground biomass (dry matter, DM) and plant N concentration. In our analysis, we compared two different sensors (Parrot Sequoia, SEQ; MicaSense RedEdge-M, REM), three statistical models (linear model; random forests, RFs; gradient-boosting machines, GBMs), and six predictor sets (i.e. different combinations of raw reflectance, vegetation indices, and canopy height). Canopy height information can be derived from UAS sensors but was not available in our study. Therefore, we tested the added value of this structural information with in situ measured bulk canopy height data. A combined field sampling and flight campaign was conducted in April 2018 at different grassland sites in southern Germany to obtain in situ and the corresponding spectral data. The hyper-parameters of the two machine learning (ML) approaches (RF, GBM) were optimized, and all model setups were run with a 6-fold cross-validation. Linear models were characterized by very low statistical performance measures, thus were not suitable to estimate DM and plant N concentration using UAS data. The non-linear ML algorithms showed an acceptable regression performance for all sensor–predictor set combinations with average (avg; cross-validated, cv) Rcv2 of 0.48, RMSEcv,avg of 53.0 g m2, and rRMSEcv,avg (relative) of 15.9 % for DM and with Rcv,avg2 of 0.40, RMSEcv,avg of 0.48 wt %, and rRMSEcv, avg of 15.2 % for plant N concentration estimation. The optimal combination of sensors, ML algorithms, and predictor sets notably improved the model performance. The best model performance for the estimation of DM (Rcv2=0.67, RMSEcv=41.9 g m2, rRMSEcv=12.6 %) was achieved with an RF model that utilizes all possible predictors and REM sensor data. The best model for plant N concentration was a combination of an RF model with all predictors and SEQ sensor data (Rcv2=0.47, RMSEcv=0.45 wt %, rRMSEcv=14.2 %). DM models with the spectral input of REM performed significantly better than those with SEQ data, while for N concentration models, it was the other way round. The choice of predictors was most influential on model performance, while the effect of the chosen ML algorithm was generally lower. The addition of canopy height to the spectral data in the predictor set significantly improved the DM models. In our study, calibrating the ML algorithm improved the model performance substantially, which shows the importance of this step.
Why it matches plant phenotyping methodsUASマルチスペクトルセンサーと機械学習を用いて、草地の乾物バイオマスおよび植物窒素濃度という植物形質を推定し、センサー・アルゴリズム・予測変数を比較検証しているため、フェノタイピング手法が中心である。
abstractOur study aims to investigate the potential of low-cost UAS-based multispectral sensors for estimating above-ground biomass (dry matter, DM) and plant N concentration.
Reproduction assets foundThe paper's field dataset (in situ DM, plant N concentration, canopy height, and corresponding UAS multispectral measurements from 10 grassland sites) is publicly deposited in PANGAEA. The authors' analysis code is only available upon request, so it does not qualify as a public asset.Dataset · publicThe field data set used in this study is
available in the PANGAEA repository at https://doi.org/10.1594/PANGAEA.920600 (Schucknecht et al., 2020b).Open asset ↗PANGAEA · 10.1594/PANGAEA.920600lines:1344-1401Code / dataset availability confirmedEurope PMC · Crossref · checked 8 Sept 2026
Measurement of variation in plant biomass is essential for answering many ecological and evolutionary questions. Quantitative estimates require plant destruction for laboratory analyses, while field studies use allometric approaches based on simple measurement of plant dimensions.We estimated the biomass of individual shrub-sized plants, using a low-cost unmanned aerial system (drone), enabling rapid data collection and non-destructive sampling. We compared volume measurement (a surrogate for biomass) and sampling time, from the simple dimension measurements and drone, to accurate laboratory-derived biomass weights. We focused on three Australian plant species which are ecologically important to their terrestrial and floodplain ecosystems: porcupine grass Triodia scariosa , Queensland bluebush Chenopodium auricomum , and lignum Duma florulenta .Estimated volume from the drone was more accurate than simple dimension measurements for porcupine grass and Queensland bluebush, compared to estimates from laboratory analyses but, not for lignum. The latter had a sparse canopy, with thin branches, few vestigial leaves and a similar color to the ground. Data collection and analysis consistently required more time for the drone method than the simple dimension measurements, but this would improve with automation.The drone method promises considerable potential for some plant species, allowing data to be collected over large spatial scales and, in time series, increasing opportunities to answer complex ecological and evolutionary questions and monitor the state of ecosystems and plant populations.
Why it matches plant phenotyping methodsドローン画像から個体の体積を推定し、植物バイオマスの代理指標として実測値と比較検証する手法開発が研究の中心である。
abstractWe estimated the biomass of individual shrub-sized plants, using a low-cost unmanned aerial system (drone), enabling rapid data collection and non-destructive sampling.
Reproduction assets foundThe article's Data Availability Statement points to a public Dryad deposit containing the paper's biomass/volume measurement data. Software tools cited (Pix4D, CloudCompare, rLiDAR) are generic third-party libraries, not authors' analysis code, and no author code or image repository is disclosed.Dataset · publicDATA AVAILABILITY STATEMENT
Data are available on the Dryad Digital Repository at: https://doi.org/10.5061/dryad.xwdbrv1g1 .Open asset ↗Dryad Digital Repository · 10.5061/dryad.xwdbrv1g1lines:209-279Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
As a key variable to characterize the process of crop growth, the aboveground biomass (AGB) plays an important role in crop management and production. Process-based models and remote sensing are two important scientific methods for crop AGB estimation. In this study, we combined observations from agricultural meteorological stations and county-level yield statistics to calibrate a process-based crop growth model for winter wheat. After that, we assimilated a reprocessed temporal-spatial filtered MODIS Leaf Area Index product into the model to derive the 1 km daily AGB dataset of the main winter wheat producing areas in China from 2007 to 2015. The validation using ground measurements also suggests the derived AGB dataset agrees well with the filed observations, i.e., the R 2 is above 0.9, and the root mean square error (RMSE) reaches 1,377 kg·ha -1 . Compared to county-level statistics during 2007-2015, the ranges of R 2 , RMSE, and mean absolute percentage error (MAPE) are 0.73~0.89, 953~1,503 kg·ha -1 , and 8%~12%, respectively. We believe our dataset can be helpful for relevant studies on regional agricultural production management and yield estimation.
Why it matches plant phenotyping methods冬小麦の地上部バイオマスという明示的な植物形質を、作物モデルとMODIS LAIデータ同化で広域推定し、地上測定および統計値で検証したデータセット研究であり、形質推定手法と検証が中心です。
abstractwe assimilated a reprocessed temporal-spatial filtered MODIS Leaf Area Index product into the model to derive the 1 km daily AGB dataset of the main winter wheat producing areas in China from 2007 to 2015.
Reproduction assets foundThe paper's winter wheat AGB analysis code is publicly available on the authors' GitHub repository, and the MODIS LAI product assimilated into WOFOST is publicly accessible via the Land-Atmosphere Interaction Research Group website. The generated AGB dataset itself is on figshare (10.6084/m9.figshare.16680784.v3), but那Code · publicHuang and Jianxi Huang designed the research, performed the analysis, and wrote the paper; Xuecao Li, Wen Zhuo, Yantong Wu, Quandi Niu, Wei Su, and Wenping Yuan edited and revised the manuscript.
Code availability
Python scripts that implement model calibration, data assimilation, dataset generation, and mapping are available ( https://github.com/paperoses/CHN_Winter_Wheat_AGB ). Further questions can be directed towards Hai Huang (haihuang@cau.edu.cn).
Competing interests
The authors declare no competing interests.
Footnotes
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary information
The onOpen asset ↗paperoses/CHN_Winter_Wheat_AGBlines:117-143Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Herbaceous aboveground biomass (HAB) is a key indicator of grassland vegetation and indirect estimation tools, such as remote sensing imagery, increase the potential for covering larger areas in a timely and cost-efficient way. Structure from Motion (SfM) is an image analysis process that can create a variety of 3D spatial models as well as 2D orthomosaics from a set of images. Computed from Unmanned Aerial Vehicle (UAV) and ground camera measurements, the SfM potential to estimate the herbaceous aboveground biomass in Sahelian rangelands was tested in this study. Both UAV and ground camera recordings were used at three different scales: temporal, landscape, and national (across Senegal). All images were processed using PIX4D software (photogrammetry software) and were used to extract vegetation indices and heights. A random forest algorithm was used to estimate the HAB and the average estimation errors were around 150 g m - ² for fresh mass (20% relative error) and 60 g m - ² for dry mass (around 25% error). A comparison between different datasets revealed that the estimates based on camera data were slightly more accurate than those from UAV data. It was also found that combining datasets across scales for the same type of tool (UAV or camera) could be a useful option for monitoring HAB in Sahelian rangelands or in other grassy ecosystems.
Why it matches plant phenotyping methodsSfM画像解析とUAV・地上カメラを用いて、植生高や指数から草本地上部バイオマスを推定し、異なるデータセット・スケールで精度比較を行っており、植物形質推定手法が中心です。
abstractthe SfM potential to estimate the herbaceous aboveground biomass in Sahelian rangelands was tested in this study.
Reproduction assets foundThe paper's UAV and ground-camera SfM phenotyping datasets (National, Landscape, and Temporal UAV datasets) are explicitly deposited on Zenodo with DOIs given in the Open Research Badges and Data Availability sections, making them public, paper-specific, and directly actionable.Dataset · publicWriting – review & editing (equal). Emile Faye: Conceptualization (equal); Methodology (equal).
OPEN RESEARCH BADGES
This article has earned an Open Data Badge for making publicly available the digitally‐shareable data necessary to reproduce the reported results. The data is available at https://doi.org/10.5281/zenodo.6421543 , https://doi.org/10.5281/zenodo.5148337 and https://doi.org/10.5281/zenodo.5145395 .
Supporting information
Appendix S1
Click here for additional data file.
ACKNOWLEDGMENTS
This research was financed by the Carbon Sequestration and Green‐house Gas Emissions in (Agro) Sylvopastoral Ecosystems in the Sahelian CILSS States (CaSSECS) project, supported by the European UnOpen asset ↗zenodo · 10.5281/zenodo.5148337lines:571-608Dataset · publicaye: Conceptualization (equal); Methodology (equal).
OPEN RESEARCH BADGES
This article has earned an Open Data Badge for making publicly available the digitally‐shareable data necessary to reproduce the reported results. The data is available at https://doi.org/10.5281/zenodo.6421543 , https://doi.org/10.5281/zenodo.5148337 and https://doi.org/10.5281/zenodo.5145395 .
Supporting information
Appendix S1
Click here for additional data file.
ACKNOWLEDGMENTS
This research was financed by the Carbon Sequestration and Green‐house Gas Emissions in (Agro) Sylvopastoral Ecosystems in the Sahelian CILSS States (CaSSECS) project, supported by the European Union under the Development Smart InnovationOpen asset ↗zenodo · 10.5281/zenodo.5145395lines:571-608Dataset · publicview & editing (equal). Rasmus Fensholt: Writing – review & editing (equal). Emile Faye: Conceptualization (equal); Methodology (equal).
OPEN RESEARCH BADGES
This article has earned an Open Data Badge for making publicly available the digitally‐shareable data necessary to reproduce the reported results. The data is available at https://doi.org/10.5281/zenodo.6421543 , https://doi.org/10.5281/zenodo.5148337 and https://doi.org/10.5281/zenodo.5145395 .
Supporting information
Appendix S1
Click here for additional data file.
ACKNOWLEDGMENTS
This research was financed by the Carbon Sequestration and Green‐house Gas Emissions in (Agro) Sylvopastoral Ecosystems in the Sahelian CILSS States (CaSSEOpen asset ↗zenodo · 10.5281/zenodo.6421543lines:571-608Code / dataset availability confirmedEurope PMC · Crossref · checked 8 Sept 2026
The wheat grain three-dimensional (3D) phenotypic characters are of great significance for final yield and variety breeding, and the ventral sulcus traits are the important factors to the wheat flour yield. The wheat grain trait measurements are necessary; however, the traditional measurement method is still manual, which is inefficient, subjective, and labor intensive; moreover, the ventral sulcus traits can only be obtained by destructive measurement. In this paper, an intelligent analysis method based on the structured light imaging has been proposed to extract the 3D wheat grain phenotypes and ventral sulcus traits. First, the 3D point cloud data of wheat grain were obtained by the structured light scanner, and then, the specified point cloud processing algorithms including single grain segmentation and ventral sulcus location have been designed; finally, 28 wheat grain 3D phenotypic characters and 4 ventral sulcus traits have been extracted. To evaluate the best experimental conditions, three-level orthogonal experiments, which include rotation angle, scanning angle, and stage color factors, were carried out on 125 grains of 5 wheat varieties, and the results demonstrated that optimum conditions of rotation angle, scanning angle, and stage color were 30°, 37°, black color individually. Additionally, the results also proved that the mean absolute percentage errors (MAPEs) of wheat grain length, width, thickness, and ventral sulcus depth were 1.83, 1.86, 2.19, and 4.81%. Moreover, the 500 wheat grains of five varieties were used to construct and validate the wheat grain weight model by 32 phenotypic traits, and the cross-validation results showed that the R 2 of the models ranged from 0.77 to 0.83. Finally, the wheat grain phenotype extraction and grain weight prediction were integrated into the specialized software. Therefore, this method was demonstrated to be an efficient and effective way for wheat breeding research.
Why it matches plant phenotyping methods構造化光画像から小麦粒の3D表現型と腹溝形質を抽出する手法を開発し、精度評価・条件最適化・ソフトウェア統合まで行っており、表現型取得が中心である。
abstractIn this paper, an intelligent analysis method based on the structured light imaging has been proposed to extract the 3D wheat grain phenotypes and ventral sulcus traits.
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 2
The original data of structured light imaging, X-ray CT, and manual measurements of 125 wheat grains.Open asset ↗lines:608-666Code / dataset availability confirmedCrossref · Europe PMC · OpenAlex · checked 8 Sept 2026
Plant breeders, scientists, and commercial producers commonly use growth rate as an integrated signal of crop productivity and stress. Plant growth monitoring is often done destructively via growth rate estimation by harvesting plants at different growth stages and simply weighing each individual plant. Within plant breeding and research applications, and more recently in commercial applications, non-destructive growth monitoring is done using computer vision to segment plants in images from the background, either in 2D or 3D, and relating these image-based features to destructive biomass measurements. Recent advancements in machine learning have improved image-based localization and detection of plants, but such techniques are not well suited to make biomass predictions when there is significant self-occlusion or occlusion from neighboring plants, such as those encountered under leafy green production in controlled environment agriculture. To enable prediction of plant biomass under occluded growing conditions, we develop an end-to-end deep learning approach that directly predicts lettuce plant biomass from color and depth image data as provided by a low cost and commercially available sensor. We test the performance of the proposed deep neural network for lettuce production, observing a mean prediction error of 7.3% on a comprehensive test dataset of 864 individuals and substantially outperforming previous work on plant biomass estimation. The modeling approach is robust to the busy and occluded scenes often found in commercial leafy green production and requires only measured mass values for training. We then demonstrate that this level of prediction accuracy allows for rapid, non-destructive detection of changes in biomass accumulation due to experimentally induced stress induction in as little as 2 days. Using this method growers may observe and react to changes in plant-environment interactions in near real time. Moreover, we expect that such a sensitive technique for non-destructive biomass estimation will enable novel research and breeding of improved productivity and yield in response to stress.
Why it matches plant phenotyping methodsRGB-D画像と深層学習を用いて、遮蔽下のレタス個体バイオマスを非破壊推定する手法を開発・評価しており、植物表現型取得が研究の中心です。
abstractwe develop an end-to-end deep learning approach that directly predicts lettuce plant biomass from color and depth image data as provided by a low cost and commercially available sensor.
Reproduction assets foundThe article provides an authors' public GitHub repository containing the analysis code for the RGB-D deep learning biomass estimation pipeline. The raw image/biomass dataset is only available on request (no public deposit).Code · publicCode available at https://github.com/NicoBux/Plant-Biomass-Monitoring .Open asset ↗NicoBux/Plant-Biomass-Monitoringlines:466-524Code / dataset availability confirmedCrossref · OpenAlex · checked 14 Sept 2026
Arctic vegetation communities are rapidly changing with climate warming, which impacts wildlife, carbon cycling and climate feedbacks. Accurately monitoring vegetation change is thus crucial, but scale mismatches between field and satellite-based monitoring cause challenges. Remote sensing from unmanned aerial vehicles (UAVs) has emerged as a bridge between field data and satellite-based mapping. We assess the viability of using high resolution UAV imagery and UAV-derived Structure from Motion (SfM) to predict cover, height and aboveground biomass (henceforth biomass) of Arctic plant functional types (PFTs) across a range of vegetation community types. We classified imagery by PFT, estimated cover and height, and modeled biomass from UAV-derived volume estimates. Predicted values were compared to field estimates to assess results. Cover was estimated with root-mean-square error (RMSE) 6.29-14.2% and height was estimated with RMSE 3.29-10.5 cm, depending on the PFT. Total aboveground biomass was predicted with RMSE 220.5 g m -2 , and per-PFT RMSE ranged from 17.14-164.3 g m -2 . Deciduous and evergreen shrub biomass was predicted most accurately, followed by lichen, graminoid, and forb biomass. Our results demonstrate the effectiveness of using UAVs to map PFT biomass, which provides a link towards improved mapping of PFTs across large areas using earth observation satellite imagery.
Why it matches plant phenotyping methodsUAV画像とSfMから植物機能タイプの被覆、草丈、地上部バイオマスを推定し、現地推定値との比較で精度評価を行うことが研究の中心であるため。
abstractWe assess the viability of using high resolution UAV imagery and UAV-derived Structure from Motion (SfM) to predict cover, height and aboveground biomass (henceforth biomass) of Arctic plant functional types (PFTs) across a range of vegetation community types.
Reproduction assets foundThe paper's plant-phenotyping data (UAV-derived PFT cover, canopy height, biomass, and field validation measurements) are explicitly stated to be publicly archived at the NSF Arctic Data Center under DOI 10.18739/A2R785Q5B. No author analysis code or trained model checkpoints are described with a public deposit.Dataset · publicns Attribution 4.0 International License (CC BY 4.0),
which permits unrestricted use, distribution, and reproduc-
tion in any medium, provided the original author(s) and
source are credited.
Data availability
Data supporting the results in this paper are publicly
archived at the National Science Foundation Arctic Data Cen-
ter: https://doi.org/10.18739/A2R785Q5B.Author information
Author ORCIDs
Kathleen M. Orndahlhttps://orcid.org/0000-0002-4873-4375
Author contributions
KMO and SJG conceived the ideas; KMO, LPWE, and JDH de-
signed the methodology; KMO, LPWE, JDH, and REP collected
the data; KMO, LPWE, and REP processed and curated the
data; KMO analyzed the data with input from MH; KMO ledOpen asset ↗10.18739/A2R785Q5Bpdf-raw-page:14 lines:1-99Code / dataset availability confirmedCrossref · checked 8 Sept 2026
Biophysical parameter retrieval using remote sensing has long been utilized for crop yield forecasting and economic practices. Remote sensing can provide information across a large spatial extent and in a timely manner within a season. Plant Area Index (PAI), Vegetation Water Content (VWC), and Wet-Biomass (WB) play a vital role in estimating crop growth and helping farmers make market decisions. Many parametric and non-parametric machine learning techniques have been utilized to estimate these parameters. A general non-parametric approach that follows a Bayesian framework is the Gaussian Process (GP). The parameters of this process-based technique are assumed to be random variables with a joint Gaussian distribution. The purpose of this work is to investigate Gaussian Process Regression (GPR) models to retrieve biophysical parameters of three annual crops utilizing combinations of multiple polarizations from C-band SAR data. RADARSAT-2 full-polarimetric images and in situ measurements of wheat, canola, and soybeans obtained from the SMAPVEX16 campaign over Manitoba, Canada, are used to evaluate the performance of these GPR models. The results from this research demonstrate that both the full-pol (HH+HV+VV) combination and the dual-pol (HV+VV) configuration can be used to estimate PAI, VWC, and WB for these three crops.
Why it matches plant phenotyping methodsSARデータとGPRモデルにより作物のPAI・VWC・湿重量バイオマスを推定する手法を開発・評価しており、植物形質取得が研究の中心である。
abstractThe purpose of this work is to investigate Gaussian Process Regression (GPR) models to retrieve biophysical parameters of three annual crops utilizing combinations of multiple polarizations from C-band SAR data.
Reproduction assets foundThe paper's Data Availability Statement explicitly provides a public GitHub repository containing the authors' GPR analysis code for crop biophysical parameter retrieval from RADARSAT-2 data. The in situ SMAPVEX16-MB measurements and RADARSAT-2 imagery themselves are not stated as publicly released by the authors.Code · publicData Availability Statement: The code for the present work is available at: https://github.com/
Swarnendu-sekhar-ghosh/GPR_biophysical_parameter_retrieval_RS2, accessed 15 February 2022.Open asset ↗Swarnendu-sekhar-ghosh/GPR_biophysical_parameter_retrieval_RS2pdf-page:24 lines:1-60Code / dataset availability confirmedOpenAlex · Crossref · checked 14 Sept 2026
Abstract Greenhouse‐based high‐throughput phenotyping (HTP) presents a useful approach for studying novel plant growth‐promoting bacteria (PGPB). Despite the potential of this approach to leverage genetic variability for breeding new maize ( Zea Mays L.) cultivars exhibiting highly stable symbiosis with PGPB, greenhouse‐based HTP platforms are not yet widely used because they are highly expensive; hence, it is challenging to perform HTP studies under a limited budget. In this study, we built a low‐cost greenhouse‐based HTP platform to collect growth‐related image‐derived phenotypes. We assessed 360 inbred maize lines with or without PGPB inoculation under nitrogen‐limited conditions. Plant height, canopy coverage, and canopy volume obtained from photogrammetry were evaluated five times during early maize development. A plant biomass index was constructed as a function of plant height and canopy coverage. Inoculation with PGPB promoted plant growth in early developmental stages. Phenotypic correlations between the image‐derived phenotypes and manual measurements were at least 0.47 in the later stages of plant development. The genomic heritability estimates of the image‐derived phenotypes ranged from 0.23 to 0.54. Moderate‐to‐strong genomic correlations between the plant biomass index and shoot dry mass (0.24–0.47) and between HTP‐based plant height and manually measured plant height (0.55–0.68) across the developmental stages showed the utility of our HTP platform. Collectively, our results demonstrate the usefulness of the low‐cost HTP platform for large‐scale genetic and management studies to capture plant growth.
Why it matches plant phenotyping methods低コストの温室HTPプラットフォームを構築し、画像から植物高・群落被覆・群落体積・バイオマス指標を抽出して手動測定と検証しており、表現型取得法が研究の中心である。
abstractPlant height, canopy coverage, and canopy volume obtained from photogrammetry were evaluated five times during early maize development.
Reproduction assets foundThe paper's Data Availability section states that the image data underlying this greenhouse maize phenotyping study are publicly deposited on Mendeley Data (https://doi.org/10.17632/frsfpgnsyz.1), which is an allowed URL. The genotype data deposit (10.17632/5gvznd2b3n.3) is also mentioned but is genomic/omics data and,Dataset · publicestimate genomic heritability
using the following formula:
ℎ2
𝑔 =
σ2
𝑔
σ2
𝑔+
σ2
𝑒
𝑛𝑟
The estimates of genomic correlation were obtained from
the estimated variance-covariance matrix in the bivariate
Bayesian GBLUP model.
2.9 Data availability
The genotype and image data are available at https://doi.org/10.17632/5gvznd2b3n.3 and https://doi.org/10.17632/frsfpgnsyz.1, respectively.
3 RESULTS
3.1 Image processing and data extraction
A total of 756 plots (plants) in each replication across time
were evaluated during plant development. Each collection of
images took approximately 10 min. The ground resolution of
the orthomosaics was approximately 2.30 mm pix–1, and the
GCP error was approximatOpen asset ↗pdf-raw-page:6 lines:1-131Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Sensitivity of forest mortality to drought in carbon-dense tropical forests remains fraught with uncertainty, while extreme droughts are predicted to be more frequent and intense. Here, the potential of temporal autocorrelation of high-frequency variability in Landsat Enhanced Vegetation Index (EVI), an indicator of ecosystem resilience, to predict spatial and temporal variations of forest biomass mortality is evaluated against in situ census observations for 64 site-year combinations in Costa Rican tropical dry forests during the 2015 ENSO drought. Temporal autocorrelation, within the optimal moving window of 24 months, demonstrated robust predictive power for in situ mortality (leave-one-out cross-validation R 2 = 0.54), which allows for estimates of annual biomass mortality patterns at 30 m resolution. Subsequent spatial analysis showed substantial fine-scale heterogeneity of forest mortality patterns, largely driven by drought intensity and ecosystem properties related to plant water use such as forest deciduousness and topography. Highly deciduous forest patches demonstrated much lower mortality sensitivity to drought stress than less deciduous forest patches after elevation was controlled. Our results highlight the potential of high-resolution remote sensing to "fingerprint" forest mortality and the significant role of ecosystem heterogeneity in forest biomass resistance to drought.
Why it matches plant phenotyping methodsLandsat EVIの時間自己相関から森林バイオマス死亡率を推定し、現地センサスで検証する手法が研究の中心であるため、植物状態のリモートセンシング型フェノタイピングに該当する。
abstractthe potential of temporal autocorrelation of high-frequency variability in Landsat Enhanced Vegetation Index (EVI), an indicator of ecosystem resilience, to predict spatial and temporal variations of forest biomass mortality is evaluated against in situ census observations
Reproduction assets foundThe paper's data availability statement points to a public Figshare repository archiving the data supporting the study's forest mortality and EVI resilience results.Dataset · publices, D.H.W. and X.T.X.
drafted the paper, Y.L.L. and G.G.K. helped with method develop-
ment in detecting reduced ecosystem resilience, and all authors con-
tributed to the interpretation of the results and to the text.
DATA AVAILABILITY STATEMENT
The data supporting the results of this study are archived in a public
repository (https://doi.org/10.6084/m9.figsh
are.17207741).
ORCIDOpen asset ↗pdf-raw-page:11 lines:1-98Code / dataset availability confirmedCrossref · checked 8 Sept 2026
Optimised farm crop productivity requires careful management in response to the spatial and temporal variability of yield. Accordingly, combination of crop simulation models and remote sensing data provides a pathway for providing the spatially variable information needed on current crop status and the expected yield. An ensemble Kalman filter (EnKF) data assimilation framework was developed to assimilate plant and soil observations into a prediction model to improve crop development and yield forecasting. Specifically, this study explored the performance of assimilating state observations into the APSIM-Wheat model using a dataset collected during the 2018/19 wheat season at a farm near Cora Lynn in Victoria, Australia. The assimilated state variables include (1) ground-based measurements of Leaf Area Index (LAI), soil moisture throughout the profile, biomass, and soil nitrate-nitrogen; and (2) remotely sensed observations of LAI and surface soil moisture. In a baseline scenario, an unconstrained (open-loop) simulation greatly underestimated the wheat grain with a relative difference (RD) of −38.3%, while the assimilation constrained simulations using ground-based LAI, ground-based biomass, and remotely sensed LAI were all found to improve the RD, reducing it to −32.7%, −9.4%, and −7.6%, respectively. Further improvements in yield estimation were found when: (1) wheat states were assimilated in phenological stages 4 and 5 (end of juvenile to flowering), (2) plot-specific remotely sensed LAI was used instead of the field average, and (3) wheat phenology was constrained by ground observations. Even when using parameters that were not accurately calibrated or measured, the assimilation of LAI and biomass still provided improved yield estimation over that from an open-loop simulation.
Why it matches plant phenotyping methods植物のLAI・バイオマス等の状態観測をリモートセンシングとデータ同化で作物モデルへ統合し、収量推定性能を評価する計算・計測ワークフローが研究の中心であるため、植物表現型計測手法として収載する。
abstractthe assimilation of LAI and biomass still provided improved yield estimation over that from an open-loop simulation.
Reproduction assets foundThe paper's field validation dataset (wheat/soil state observations from the 2018/19 Cora Lynn experiment) is openly available on the authors' PRISM (Monash) site, and the authors' APSIM-EnKF data assimilation source code is explicitly stated to be publicly available on GitHub. Weather data sources (BoM, Weather UndergDataset · publicThe field validation data
presented in this study are openly available in the P-band Radiometer Inferred Soil Moisture (PRISIM)
website at https://www.prism.monash.edu/index.htmlOpen asset ↗pdf-page:19 lines:1-59Code · publicThe APSIM-EnKF data assimilation framework used in this study was the version
developed and described by Zhang [28] (source code available on https://github.com/Open asset ↗pdf-page:3 lines:1-53Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Abstract Imaging spectroscopy provides the opportunity to incorporate leaf and canopy optical data into ecological studies, but the extent to which remote sensing of vegetation can enhance the study of belowground processes is not well understood. In terrestrial systems, aboveground and belowground vegetation quantity and quality are coupled, and both influence belowground microbial processes and nutrient cycling. We hypothesized that ecosystem productivity, and the chemical, structural and phylogenetic‐functional composition of plant communities would be detectable with remote sensing and could be used to predict belowground plant and soil processes in two grassland biodiversity experiments: the BioDIV experiment at Cedar Creek Ecosystem Science Reserve in Minnesota and the Wood River Nature Conservancy experiment in Nebraska. We tested whether aboveground vegetation chemistry and productivity, as detected from airborne sensors, predict soil properties, microbial processes and community composition. Imaging spectroscopy data were used to map aboveground biomass, green vegetation cover, functional traits and phylogenetic‐functional community composition of vegetation. We examined the relationships between the image‐derived variables and soil carbon and nitrogen concentration, microbial community composition, biomass and extracellular enzyme activity, and soil processes, including net nitrogen mineralization. In the BioDIV experiment—which has low overall diversity and productivity despite high variation in each—belowground processes were driven mainly by variation in the amount of organic matter inputs to soils. As a consequence, soil respiration, microbial biomass and enzyme activity, and fungal and bacterial composition and diversity were significantly predicted by remotely sensed vegetation cover and biomass. In contrast, at Wood River—where plant diversity and productivity were consistently higher—belowground processes were driven mainly by variation in the quality of aboveground inputs to soils. Consequently, remotely sensed functional, chemical and phylogenetic composition of vegetation predicted belowground extracellular enzyme activity, microbial biomass, and net nitrogen mineralization rates but aboveground biomass (or cover) did not. The contrasting associations between the quantity (productivity) and quality (composition) of aboveground inputs with belowground soil attributes provide a basis for using imaging spectroscopy to understand belowground processes across productivity gradients in grassland systems. However, a mechanistic understanding of how above and belowground components interact among different ecosystems remains critical to extending these results broadly.
Why it matches plant phenotyping methods航空機イメージング分光法により植物バイオマス、緑色被覆、機能形質、群集組成を抽出し、地下プロセスとの関係を評価しており、植物形質取得が研究の中心的手法である。
abstractImaging spectroscopy data were used to map aboveground biomass, green vegetation cover, functional traits and phylogenetic‐functional community composition of vegetation.
Reproduction assets foundThe paper's Open Research statement deposits its data and novel code (Cavender-Bares et al. 2021) on DRUM (University of Minnesota) under a Creative Commons license, and Cedar Creek LTER data are available at the Cedar Creek data repository. These are paper-specific, public, actionable assets covering the phenotyping/遥Dataset · publicData and novel code (Cavender‐Bares et al. 2021 ) are accessible through a Creative Commons license for non‐commercial use on DRUM, the Data Repository of the University of Minnesota, at https://conservancy.umn.edu/handle/11299/220311Open asset ↗DRUM · 11299/220311lines:294-333Dataset · publicand at the Cedar Creek Ecosystem Science Reserve Long‐Term Ecological Research data repository: https://www.cedarcreek.umn.edu/research/dataOpen asset ↗Cedar Creek Ecosystem Science Reserve Long‐Term Ecological Research data repositorylines:294-333Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Kenaf ( Hibiscus cannabinus L.) is an industrial crop used as a raw material in various fields and is cultivated worldwide. Compared to high potential for its utilization, breeding sector is not vigorous partially due to laborous breeding procedure. Thus, efficient breeding methods are required for varieties that can adapt to various environments and obtain optimal production. For that, identifying kenaf’s characteristics is very important during the breeding process. Here, we investigated if RGB based vegetative index (VI) could be associated with traits for biomass. We used 20 varieties and germplasm of kenaf and RGB images taken with unmanned aerial vehicles (UAVs) for field selection in early and late growth stage. In addition, measuring the stem diameter and the number of nodes confirmed whether the vegetative index value obtained from the RGB image could infer the actual plant biomass. Based on the results, it was confirmed that the individual surface area and estimated plant height, which were identified from the RGB image, had positive correlations with the stem diameter and node number, which are actual growth indicators of the rate of growth further, biomass could also be estimated based on this. Moreover, it is suggested that VIs have a high correlation with actual growth indicators; thus, the biomass of kenaf could be predicted. Interstingly, those traits showing high correlation in the late stage had very low correlations in the early stage. To sum up, the results in the current study suggest a more efficient breeding method by reducing labor and resources required for breeding selection by the use of RGB image analysis obtained by UAV. This means that considerable high-quality research could be performed even with a tight budget. Furthermore, this method could be applied to crop management, which is done with other vegetative indices using a multispectral camera.
Why it matches plant phenotyping methodsUAVのRGB画像から植生指数、表面積、推定草丈を抽出し、茎径・節数・バイオマスを推定する画像ベース表現型計測法を評価しており、方法の適用と妥当性確認が中心です。
abstractHere, we investigated if RGB based vegetative index (VI) could be associated with traits for biomass.
Reproduction assets foundThe article states that all relevant data (kenaf phenotyping measurements and UAV RGB-derived traits/VIs) are available on the Open Science Framework (osf.io/tfamn), which is a paper-specific public deposit. However, the only permitted URL in this audit is the FAOSTAT statistics page, which is a generic external data源,Dataset · publicAll relevant data are available on the Open Science Framework ( osf.io/tfamn ).Open asset ↗lines:584-612Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Understanding temporal accumulation of soybean above-ground biomass (AGB) has the potential to contribute to yield gains and the development of stress-resilient cultivars. Our main objectives were to develop a high-throughput phenotyping method to predict soybean AGB over time and to reveal its temporal quantitative genomic properties. A subset of the SoyNAM population (n = 383) was grown in multi-environment trials and destructive AGB measurements were collected along with multispectral and RGB imaging from 27 to 83 days after planting (DAP). We used machine-learning methods for phenotypic prediction of AGB, genomic prediction of breeding values, and genome-wide association studies (GWAS) based on random regression models (RRM). RRM enable the study of changes in genetic variability over time and further allow selection of individuals when aiming to alter the general response shapes over time. AGB phenotypic predictions were high (R2 = 0.92–0.94). Narrow-sense heritabilities estimated over time ranged from low to moderate (from 0.02 at 44 DAP to 0.28 at 33 DAP). AGB from adjacent DAP had highest genetic correlations compared to those DAP further apart. We observed high accuracies and low biases of prediction indicating that genomic breeding values for AGB can be predicted over specific time intervals. Genomic regions associated with AGB varied with time, and no genetic markers were significant in all time points evaluated. Thus, RRM seem a powerful tool for modeling the temporal genetic architecture of soybean AGB and can provide useful information for crop improvement. This study provides a basis for future studies to combine phenotyping and genomic analyses to understand the genetic architecture of complex longitudinal traits in plants.
Why it matches plant phenotyping methods大豆地上部バイオマスを時系列のRGB・マルチスペクトル画像から予測するハイスループット表現型解析法を開発し、予測精度も評価しているため、表現型取得・推定法が中心的です。
abstractOur main objectives were to develop a high-throughput phenotyping method to predict soybean AGB over time
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 1 ) previously reported in the literature to correlate with crop biomass ( Babar et al.Open asset ↗lines:305-313Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 8 Sept 2026
Understanding the growth and development of individual plants is of central importance in modern agriculture, crop breeding, and crop science. To this end, using 3D data for plant analysis has gained attention over the last years. High-resolution point clouds offer the potential to derive a variety of plant traits, such as plant height, biomass, as well as the number and size of relevant plant organs. Periodically scanning the plants even allows for performing spatio-temporal growth analysis. However, highly accurate 3D point clouds from plants recorded at different growth stages are rare, and acquiring this kind of data is costly. Besides, advanced plant analysis methods from machine learning require annotated training data and thus generate intense manual labor before being able to perform an analysis. To address these issues, we present with this dataset paper a multi-temporal dataset featuring high-resolution registered point clouds of maize and tomato plants, which we manually labeled for computer vision tasks, such as for instance segmentation and 3D reconstruction, providing approximately 260 million labeled 3D points. To highlight the usability of the data and to provide baselines for other researchers, we show a variety of applications ranging from point cloud segmentation to non-rigid registration and surface reconstruction. We believe that our dataset will help to develop new algorithms to advance the research for plant phenotyping, 3D reconstruction, non-rigid registration, and deep learning on raw point clouds. The dataset is freely accessible at https://www.ipb.uni-bonn.de/data/pheno4d/.
Why it matches plant phenotyping methods植物フェノタイピング用の時系列3D点群データセットを構築し、手動アノテーションと複数の解析ベースラインを提供することが中心であり、再利用可能なデータ基盤として適格です。
abstractwe present with this dataset paper a multi-temporal dataset featuring high-resolution registered point clouds of maize and tomato plants, which we manually labeled for computer vision tasks
Reproduction assets foundThe paper's core contribution is the Pheno4D dataset of labeled maize and tomato plant point clouds, explicitly stated to be freely and publicly available at the authors' Bonn repository. A companion public data-loader API (Python/C++) is also provided on GitHub. Both are paper-specific, public, and directly actionableDataset · publicThe dataset is freely accessible at https://www.ipb.uni-bonn.de/data/pheno4d/.Open asset ↗https://www.ipb.uni-bonn.de/data/pheno4d/pdf-page:1 lines:1-65Code · publicWe provide the
code and the examples for loading the data at https://github.com/AIS-Bonn/data_loaders.Open asset ↗https://github.com/AIS-Bonn/data_loaderspdf-page:10 lines:1-57Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Environmental factors might influence the carbon balance and sugar content in grapevine. In this two-year research, the STELLA software was employed to predict dry matter accumulation in Sangiovese vines, comparing the traditional vertical shoot positioning (VSP) and the single high wire (SHW) trellis systems. Every week, vegetative, eco-physiological and grape quality parameters were collected for 15 tagged vines per trellis system to set up the software. Significant differences in photosynthesis were recorded in 2014, with higher values in VSP (23-25% more). Shoot growth was significantly higher in VSP (20-25% more), whereas higher dry matter (30%) and yield (9-11% more) were detected for SHW. At harvest, berry composition suggested a slower ripening in SHW compared to VSP, which was linked to the shading of clusters in SHW. Finally, for the first time, linear regressions were found between measured berry sugar content and STELLA-estimated dry matter (R 2 = 0.96 in VSP; R 2 = 0.95 in SHW). This latter evidence allowed the estimation of berry sugar content, showing this software to be a practical tool to support winegrowers in decision making. Other studies are already underway to calibrate and validate the model for other varieties, training systems and environments.
Why it matches plant phenotyping methodsSTELLAモデルによるブドウの乾物蓄積・果実糖含量の推定と、実測値との回帰による検証が研究の中心であり、植物形質の計算推定手法として扱える。
abstractthe STELLA software was employed to predict dry matter accumulation in Sangiovese vines
Reproduction assets foundThe paper's phenotyping measurements (gas exchange, dry matter, berry composition) are reported only within the article itself ('Data is contained within the article'), with no public dataset deposit. However, the authors provide a public supplement containing paper-specific assets: Figure S1 (experimental site images)Supplement · publicbut, above all, herself for the tenacity in being able to finally publish the results of her master’s thesis. Another chapter is closed or not?
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Materials
The following are available online at https://www.mdpi.com/article/10.3390/plants10081675/s1 , Figure S1: Experimental site pictures, Figure S2: simplified model structure of STELLA software.
Click here for additional data file.
Author Contributions
Conceptualization, G.B.M. and L.S.; methodology and software validation, L.S. and E.C.; formal analysis, investigation and data curation, L.S., E.C., S.S., F.Open asset ↗lines:74-114Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · bioRxiv · checked 15 Sept 2026
Abstract Greenhouse-based high-throughput phenotyping (HTP) presents a useful approach for studying novel plant growth-promoting bacteria (PGPB). Despite the potential of this approach to leverage genetic variability for breeding new maize cultivars exhibiting highly stable symbiosis with PGPB, greenhouse-based HTP platforms are not yet widely used because they are highly expensive; hence, it is challenging to perform HTP studies under a limited budget. In this study, we built a low-cost greenhouse-based HTP platform to collect growth-related image-derived phenotypes. We assessed 360 inbred maize lines with or without PGPB inoculation under nitrogen-limited conditions. Plant height, canopy coverage, and canopy volume obtained from photogrammetry were evaluated five times during early maize development. A plant biomass index was constructed as a function of plant height and canopy coverage. Inoculation with PGPB promoted plant growth. Phenotypic correlations between the image-derived phenotypes and manual measurements were at least 0.6. The genomic heritability estimates of the image-derived phenotypes ranged from 0.23 to 0.54. Moderate-to-strong genomic correlations between the plant biomass index and shoot dry mass (0.24–0.47) and between HTP-based plant height and manually measured plant height (0.55–0.68) across the developmental stages showed the utility of our HTP platform. Collectively, our results demonstrate the usefulness of the low-cost HTP platform for large-scale genetic and management studies to capture plant growth. Core ideas A low-cost greenhouse-based HTP platform was developed. Image-derived phenotypes presented moderate to high genomic heritabilities and correlations. Plant growth-promoting bacteria can improve plant resilience under nitrogen-limited conditions.
Why it matches plant phenotyping methods低コスト温室HTPプラットフォームを開発し、画像から植物高・キャノピー被覆・体積などの形質を抽出・検証しており、表現型取得手法が研究の中心である。
abstractIn this study, we built a low-cost greenhouse-based HTP platform to collect growth-related image-derived phenotypes.
Reproduction assets foundThe article describes a low-cost greenhouse HTP platform and image-derived phenotyping of a 360-line tropical maize association panel under PGPB inoculation. The only paper-specific public asset explicitly referenced is a Mendeley Data deposit containing information about the maize panel used in the experiment. No phenDataset · publiclines was used to study the response
172 to PGPB. Of these, 179 inbred lines were from the Luiz de Queiroz College of Agriculture-
173 University of Sao Paulo (ESALQ-USP) and 181 were from the Instituto de Desenvolvimento
174 Rural do Paraná (IAPAR). More information about this panel is available on the Mendeley
175 platform (https://data.mendeley.com/datasets/5gvznd2b3n).
176 The inbred lines were evaluated under two managements: with (B+) and without (B-)
177 PGPB inoculation under nitrogen stress. The B+ management consisted of a synthetic pop-
178 ulation of four PGPB. Bacillus thuringiensis RZ2MS9, Delftia sp. RZ4MS18 (Batista et al.,
179 2018, 2021), Pantoea agglomerans 33.1 (Quecine Open asset ↗Mendeley · 5gvznd2b3npdf-layout-page:8 lines:1-37Code / dataset availability confirmedCrossref · checked 14 Sept 2026
The estimation of plant growth is a challenging but key issue that may help us to understand crop vs. environment interactions. To perform precise and high-throughput analysis of plant growth in field conditions, remote sensing using LiDAR and unmanned aerial vehicles (UAV) has been developed, in addition to other approaches. Although there are software tools for the processing of LiDAR data in general, there are no specialized tools for the automatic extraction of experimental field blocks with crops that represent specific “points of interest”. Our tool aims to detect precisely individual field plots, small experimental plots (in our case 10 m2) which in agricultural research represent the treatment of a single plant or one genotype in a breeding trial. Cutting out points belonging to the specific field plots allows the user to measure automatically their growth characteristics, such as plant height or plot biomass. For this purpose, new method of edge detection was combined with Fourier transformation to find individual field plots. In our case study with winter wheat, two UAV flight levels (20 and 40 m above ground) and two canopy surface modelling methods (raw points and B-spline) were tested. At a flight level of 20 m, our algorithm reached a 0.78 to 0.79 correlation with LiDAR measurement with manual validation (RMSE = 0.19) for both methods. The algorithm, in the Python 3 programming language, is designed as open-source and is freely available publicly, including the latest updates.
Why it matches plant phenotyping methodsUAV-LiDAR点群から実験区画を自動抽出し、植物高や区画バイオマスなどの生育形質を測定するPythonアルゴリズムとツールの開発・検証が中心である。
abstractOur tool aims to detect precisely individual field plots, small experimental plots (in our case 10 m2) which in agricultural research represent the treatment of a single plant or one genotype in a breeding trial.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThis software tool is open-source and is freely available
here: https://github.com/UPOL-Plant-phenotyping-research-group/UAV-crop-analyzer,
accessed on 1 June 2021.Open asset ↗UPOL-Plant-phenotyping-research-group/UAV-crop-analyzerpdf-page:2 lines:1-59Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Abstract Sorghum (Sorghum bicolor) is a model C4 crop made experimentally tractable by extensive genomic and genetic resources. Biomass sorghum is studied as a feedstock for biofuel and forage. Mechanistic modeling suggests that reducing stomatal conductance (gs) could improve sorghum intrinsic water use efficiency (iWUE) and biomass production. Phenotyping to discover genotype-to-phenotype associations remains a bottleneck in understanding the mechanistic basis for natural variation in gs and iWUE. This study addressed multiple methodological limitations. Optical tomography and a machine learning tool were combined to measure stomatal density (SD). This was combined with rapid measurements of leaf photosynthetic gas exchange and specific leaf area (SLA). These traits were the subject of genome-wide association study and transcriptome-wide association study across 869 field-grown biomass sorghum accessions. The ratio of intracellular to ambient CO2 was genetically correlated with SD, SLA, gs, and biomass production. Plasticity in SD and SLA was interrelated with each other and with productivity across wet and dry growing seasons. Moderate-to-high heritability of traits studied across the large mapping population validated associations between DNA sequence variation or RNA transcript abundance and trait variation. A total of 394 unique genes underpinning variation in WUE-related traits are described with higher confidence because they were identified in multiple independent tests. This list was enriched in genes whose Arabidopsis (Arabidopsis thaliana) putative orthologs have functions related to stomatal or leaf development and leaf gas exchange, as well as genes with nonsynonymous/missense variants. These advances in methodology and knowledge will facilitate improving C4 crop WUE.
Why it matches plant phenotyping methods光学トモグラフィーと機械学習ツールによる気孔密度測定を中心的な方法として開発・適用し、ガス交換等の表現型を大規模集団で評価しているため。
abstractThis study addressed multiple methodological limitations. Optical tomography and a machine learning tool were combined to measure stomatal density (SD).
Reproduction assets foundThe paper's optical tomography leaf images (the sensor inputs used for machine-learning stomatal density phenotyping) are publicly deposited in the Illinois Data Bank. Phenotypic trait data (Supplemental Table S12) are public but only via the article's supplemental material without a listed URL; RNA-seq (PRJNA522466) GDataset · publichttps://www.ncbi.nlm.nih.gov/bioproject/PRJNA522466/ .
Genotyping-by-sequencing data are available at: https://doi.org/10.5281/zenodo.5019227 . Phenotypic data are available as
part of the supplemental
material ( Supplemental Table
S12 ). Optical tomography images from this article can be found in the Illinois
Data Bank under: https://doi.org/10.13012/B2IDB-1411926_V1 .
Supplemental data
The following materials are available in the online version of this article.Open asset ↗10.13012/B2IDB-1411926_V1lines:985-1051Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · checked 9 Sept 2026
Non-forest ecosystems, dominated by shrubs, grasses and herbaceous plants, provide ecosystem services including carbon sequestration and forage for grazing, and are highly sensitive to climatic changes. Yet these ecosystems are poorly represented in remotely sensed biomass products and are undersampled by in situ monitoring. Current global change threats emphasize the need for new tools to capture biomass change in non-forest ecosystems at appropriate scales. Here we developed and deployed a new protocol for photogrammetric height using unoccupied aerial vehicle (UAV) images to test its capability for delivering standardized measurements of biomass across a globally distributed field experiment. We assessed whether canopy height inferred from UAV photogrammetry allows the prediction of aboveground biomass (AGB) across low-stature plant species by conducting 38 photogrammetric surveys over 741 harvested plots to sample 50 species. We found mean canopy height was strongly predictive of AGB across species, with a median adjusted R 2 of 0.87 (ranging from 0.46 to 0.99) and median prediction error from leave-one-out cross-validation of 3.9%. Biomass per-unit-of-height was similar within but different among, plant functional types. We found that photogrammetric reconstructions of canopy height were sensitive to wind speed but not sun elevation during surveys. We demonstrated that our photogrammetric approach produced generalizable measurements across growth forms and environmental settings and yielded accuracies as good as those obtained from in situ approaches. We demonstrate that using a standardized approach for UAV photogrammetry can deliver accurate AGB estimates across a wide range of dynamic and heterogeneous ecosystems. Many academic and land management institutions have the technical capacity to deploy these approaches over extents of 1-10 ha -1 . Photogrammetric approaches could provide much-needed information required to calibrate and validate the vegetation models and satellite-derived biomass products that are essential to understand vulnerable and understudied non-forested ecosystems around the globe.
Why it matches plant phenotyping methodsUAV画像からキャノピー高を推定し、地上部バイオマスを予測するフォトグラメトリ手法の開発・検証・標準化が研究の中心であるため。
abstractHere we developed and deployed a new protocol for photogrammetric height using unoccupied aerial vehicle (UAV) images to test its capability for delivering standardized measurements of biomass across a globally distributed field experiment.
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the study's UAV aerial images, marker/plot coordinates, and harvested dry biomass weights at the NERC Environmental Information Data Centre, and the photogrammetric processing and statistical analysis code at Zenodo. Both are paper-specific, public, and have作者Dataset · publicThe data collected for this publication, including aerial images, marker and plot coordinates and dry sample weights, as well as site and survey metadata, are available from the NERC Environmental Information Data Centre < https://doi.org/10.5285/1ec13364‐cbc6‐4ab5‐a147‐45a103853424 >.Open asset ↗NERC Environmental Information Data Centre · 10.5285/1ec13364‐cbc6‐4ab5‐a147‐45a103853424lines:222-246Code · publicCode for photogrammetric processing and statistical analysis is available at Zenodo < https://doi.org/10.5281/zenodo.4783021 >Open asset ↗Zenodo · 10.5281/zenodo.4783021lines:222-246Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Traditional methods to measure spatio-temporal variations in above-ground biomass dynamics (AGBD) predominantly rely on the extraction of several vegetation-index features highly associated with AGBD variations through the phenological crop cycle. This work presents a comprehensive comparison between two different approaches for feature extraction for non-destructive biomass estimation using aerial multispectral imagery. The first method is called GFKuts, an approach that optimally labels the plot canopy based on a Gaussian mixture model, a Montecarlo-based K-means, and a guided image filtering for the extraction of canopy vegetation indices associated with biomass yield. The second method is based on a Graph-Based Data Fusion (GBF) approach that does not depend on calculating vegetation-index image reflectances. Both methods are experimentally tested and compared through rice growth stages: vegetative, reproductive, and ripening. Biomass estimation correlations are calculated and compared against an assembled ground-truth biomass measurements taken by destructive sampling. The proposed GBF-Sm-Bs approach outperformed competing methods by obtaining biomass estimation correlation of 0.995 with R2=0.991 and RMSE=45.358 g. This result increases the precision in the biomass estimation by around 62.43% compared to previous works.
Why it matches plant phenotyping methodsイネの地上部バイオマスという植物形質を、航空マルチスペクトル画像から抽出・推定する特徴抽出手法を開発し、比較検証しているため、フェノタイピング手法が中心です。
abstractThis work presents a comprehensive comparison between two different approaches for feature extraction for non-destructive biomass estimation using aerial multispectral imagery.
Reproduction assets foundThe paper's multispectral UAV imagery and ground-truth biomass measurements are deposited on OSF (via a view-only link, which is nonetheless publicly reachable with the URL), and the crop-monitoring protocol is on protocols.io. No author analysis code repository is stated.Dataset · publicDatasets supporting the experimental results presented in Figure 4 , Figure 5 and Figure 6 are available at the Open Science Framework: https://osf.io/cde6h/?view_only=1c4e5e03b9a34d3b96736ad8ab1b2774 folder Raw Data—MDPI Sensors.Open asset ↗Open Science Frameworklines:197-212Code / dataset availability confirmedCrossref · Europe PMC · checked 9 Sept 2026
Nitrogen (N) is one of the key nutrients supplied in agricultural production worldwide. Over-fertilization can have negative influences on the field and the regional level (e.g., agro-ecosystems). Remote sensing of the plant N of field crops presents a valuable tool for the monitoring of N flows in agro-ecosystems. Available data for validation of satellite-based remote sensing of N is scarce. Therefore, in this study, field spectrometer measurements were used to simulate data of the Sentinel-2 (S2) satellites developed for vegetation monitoring by the ESA. The prediction performance of normalized ratio indices (NRIs), random forest regression (RFR) and Gaussian processes regression (GPR) for plant-N-related traits was assessed on a diverse real-world dataset including multiple crops, field sites and years. The plant N traits included the mass-based N measure, N concentration in the biomass (Nconc), and an area-based N measure approximating the plant N uptake (NUP). Spectral indices such as normalized ratio indices (NRIs) performed well, but the RFR and GPR methods outperformed the NRIs. Key spectral bands for each trait were identified using the RFR variable importance measure and the Gaussian processes regression band analysis tool (GPR-BAT), highlighting the importance of the short-wave infrared (SWIR) region for estimation of plant Nconc—and to a lesser extent the NUP. The red edge (RE) region was also important. The GPR-BAT showed that five bands were sufficient for plant N trait and leaf area index (LAI) estimation and that a surplus of bands effectively reduced prediction performance. A global sensitivity analysis (GSA) was performed on all traits simultaneously, showing the dominance of the LAI in the mixed remote sensing signal. To delineate the plant-N-related traits from this signal, regional and/or national data collection campaigns producing large crop spectral libraries (CSL) are needed. An improved database will likely enable the mapping of N at the agro-ecosystem level or for use in precision farming by farmers in the future.
Why it matches plant phenotyping methods圃場分光データとSentinel-2模擬データを用いて、植物体N関連形質を推定する手法を比較・評価しており、形質取得・推定手法が研究の中心である。
abstractTherefore, in this study, field spectrometer measurements were used to simulate data of the Sentinel-2 (S2) satellites developed for vegetation monitoring by the ESA.
Reproduction assets foundThe authors state the field-spectrometer spectral library and plant trait measurements (N conc, Chl AB, LAI, LAI-scaled traits) used in this study are openly available via an ETH research collection DOI, which is an allowed URL. This is a paper-specific, public, actionable phenotype/spectral dataset.Dataset · publicThe data presented in this study are openly available in: https://doi.org/10.3929/ethz-b-000488405 . Please also see the ‘ supplementary materials – dataset ’ for more information on the dataset.Open asset ↗ethz-b-000488405 · 10.3929/ethz-b-000488405lines:301-314Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Abstract. Plant shoots can act as sources or sinks of trace gases including methane and nitrous oxide. Accurate measurements of these trace gas fluxes require enclosing of shoots in closed non-steady-state chambers. Due to plant physiological activity, this type of enclosure, however, leads to CO2 depletion in the enclosed air volume, condensation of transpired water, and warming of the enclosures exposed to sunlight, all of which may bias the flux measurements. Here, we present ShoTGa-FluMS (SHOot Trace Gas FLUx Measurement System), a novel measurement system designed for continuous and automated measurements of trace gas and volatile organic compound (VOC) fluxes from plant shoots. The system uses transparent shoot enclosures equipped with Peltier cooling elements and automatically replaces fixated CO2 and removes transpired water from the enclosure. The system is designed for measuring trace gas fluxes over extended periods, capturing diurnal and seasonal variations, and linking trace gas exchange to plant physiological functioning and environmental drivers. Initial measurements show daytime CH4 emissions of two pine shoots of 0.056 and 0.089 nmol per gram of foliage dry weight (d.w.) per hour or 7.80 and 13.1 nmolm-2h-1. Simultaneously measured CO2 uptake rates were 9.2 and 7.6 mmolm-2h-1, and transpiration rates were 1.24 and 0.90 molm-2h-1. Concurrent measurement of VOC emissions demonstrated that potential effects of spectral interferences on CH4 flux measurements were at least 10-fold smaller than the measured CH4 fluxes. Overall, this new system solves multiple technical problems that have so far prevented automated plant shoot trace gas flux measurements and holds the potential for providing important new insights into the role of plant foliage in the global CH4 and N2O cycles.
Why it matches plant phenotyping methods植物シュートからの微量ガス・VOCフラックスを自動・連続測定する装置を開発し、技術的課題を解決しているため、植物生理状態の取得方法が研究の中心である。
abstractHere, we present ShoTGa-FluMS (SHOot Trace Gas FLUx Measurement System), a novel measurement system designed for continuous and automated measurements of trace gas and volatile organic compound (VOC) fluxes from plant shoots.
Reproduction assets foundThe paper's Code and data availability section states that raw measurement data and the analysis script are deposited on Zenodo (doi 10.5281/zenodo.4609836) and that the custom control software (Koppi/koppismear) is publicly available on Bitbucket. Both are paper-specific, public, and actionable.Dataset · publicRaw measurement data and the analysis script are available at Zenodo ( https://doi.org/10.5281/zenodo.4609836 ; Kohl et al. , 2021 ).Open asset ↗Zenodo · 10.5281/zenodo.4609836lines:435-476Code · publicRaw measurement data and the analysis script are available at Zenodo ( https://doi.org/10.5281/zenodo.4609836 ; Kohl et al. , 2021 ). The software used to operate both systems is available online at https://bitbucket.org/makoskinen/koppismear/ ( Koskinen , 2021 ) .Open asset ↗Bitbucket · koppismearlines:435-476Code / dataset availability confirmedOpenAlex · checked 8 Sept 2026
Unmanned aerial vehicles (UAV) carrying multispectral cameras are increasingly being used for high-throughput phenotyping (HTP) of above-ground traits of crops to study genetic diversity, resource use efficiency and responses to abiotic or biotic stresses. There is significant unexplored potential for repeated data collection through a field season to reveal information on the rates of growth and provide predictions of the final yield. Generating such information early in the season would create opportunities for more efficient in-depth phenotyping and germplasm selection. This study tested the use of high-resolution time-series imagery (5 or 10 sampling dates) to understand the relationships between growth dynamics, temporal resolution and end-of-season above-ground biomass (AGB) in 869 diverse accessions of highly productive (mean AGB = 23.4 Mg/Ha), photoperiod sensitive sorghum. Canopy surface height (CSM), ground cover (GC), and five common spectral indices were considered as features of the crop phenotype. Spline curve fitting was used to integrate data from single flights into continuous time courses. Random Forest was used to predict end-of-season AGB from aerial imagery, and to identify the most informative variables driving predictions. Improved prediction of end-of-season AGB (RMSE reduction of 0.24 Mg/Ha) was achieved earlier in the growing season (10 to 20 days) by leveraging early- and mid-season measurement of the rate of change of geometric and spectral features. Early in the season, dynamic traits describing the rates of change of CSM and GC predicted end-of-season AGB best. Late in the season, CSM on a given date was the most influential predictor of end-of-season AGB. The power to predict end-of-season AGB was greatest at 50 days after planting, accounting for 63% of variance across this very diverse germplasm collection with modest error (RMSE 1.8 Mg/ha). End-of-season AGB could be predicted equally well when spline fitting was performed on data collected from five flights versus 10 flights over the growing season. This demonstrates a more valuable and efficient approach to using UAVs for HTP, while also proposing strategies to add further value.
Why it matches plant phenotyping methodsUAV時系列画像から作物形質を抽出し、成長動態と収穫期バイオマスを予測するHTP手法を、サンプリング頻度や予測性能とともに技術的に評価しており、フェノタイピング手法が中心である。
abstractUnmanned aerial vehicles (UAV) carrying multispectral cameras are increasingly being used for high-throughput phenotyping (HTP) of above-ground traits of crops
Reproduction assets foundThe paper's UAV-derived sorghum phenotyping datasets (imagery features, AGB measurements) are deposited in the Illinois Databank with a public DOI listed in the Data Availability Statement. No author analysis code or trained models are explicitly shared.Dataset · publicData Availability Statement: The datasets used and analyzed during the current study are available
from the corresponding author via Illinois Databank at https://doi.org/10.13012/B2IDB-5649852_V2.Open asset ↗Illinois Databank · B2IDB-5649852_V2pdf-page:14 lines:1-59Code / dataset availability confirmedEurope PMC · bioRxiv · checked 9 Sept 2026
ABSTRACT Over 800 million people across the tropics rely on cassava as a major source of calories. While the root dry matter content (RDMC) of this starchy root crop is important for both producers and consumers, characterization of RDMC by traditional methods is time-consuming and laborious for breeding programs. Alternate phenotyping methods have been proposed but lack the accuracy, cost, or speed ultimately needed for cassava breeding programs. For this reason, we investigated the use of a low-cost, handheld NIR spectrometer for field-based RDMC prediction in cassava. Oven-dried measurements of RDMC were paired with 21,044 scans of roots of 376 diverse clones from 10 field trials in Nigeria and grouped into training and test sets based on cross-validation schemes relevant to plant breeding programs. Mean partial least squares regression model performance ranged from R 2 p = 0.62 - 0.89 for within-trial predictions, which is within the range achieved with laboratory-grade spectrometers in previous studies. Relative to other factors, model performance was highly impacted by the inclusion of samples from the same environment in both the training and test sets. Random forest variable importance analysis of root spectra revealed increased importance in a region previously identified as predictive of water content in plants (~950 - 990 nm). With appropriate model calibration, the tested spectrometer will allow for field-based collection of spectral data with a smartphone for accurate RDMC prediction and potentially other quality traits, a step that could be easily integrated into existing harvesting workflows of cassava breeding programs. CORE IDEAS A low-cost, handheld near-infrared spectrometer was tested for phenotyping of cassava roots Plant breeding-relevant cross-validation schemes were used for predictions High prediction accuracies were achieved for cassava root dry matter content A spectral region predictive of plant water content was identified as important
Why it matches plant phenotyping methodsカッサバ根の乾物含量という植物形質を対象に、低コスト携帯型NIR分光計と予測モデルを開発・検証しており、フェノタイピング手法が研究の中心である。
abstractwe investigated the use of a low-cost, handheld NIR spectrometer for field-based RDMC prediction in cassava.
Reproduction assets foundThe paper's raw RDMC and NIR spectral data (21,044 SCiO scans paired with oven-dry RDMC from 10 Nigerian field trials) are publicly deposited on Cyverse under the GoreLab shared directory, as stated in the Data Availability section. The analysis R code on GitHub (GoreLab/CassavaNIRS) is paper-specific but its URL is anDataset · publicRaw RDMC and spectral data are available for download on Cyverse atOpen asset ↗Cyversepdf-page:20 lines:1-54Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Site-specific nitrogen (N) management in precision agriculture is used to improve nitrogen use efficiency (NUE) at the field scale. The objective of this study has been (i) to better understand the relationship between data derived from an unmanned aerial vehicle (UAV) platform and the crop temporal and spatial variability in small fields of about 2 ha, and (ii) to increase knowledge on how such data can support variable application of N fertilizer in winter wheat (Triticum aestivum). Multi-spectral images acquired with a commercially available UAV platform and soil available mineral N content (Nmin) sampled in the field were used to evaluate the in-field variability of the N-status of the crop. A plot-based field experiment was designed to compare uniform standard rate (ST) to variable rate (VR) N application. Non-fertilized (NF) and N-rich (NR) plots were placed as positive and negative N-status references and were used to calculate various indicators related to NUE. The crop was monitored throughout the season to support three split fertilizations. The data of two growing seasons (2017/2018 and 2018/2019) were used to validate the sensitivity of spectral vegetation indices (SVI) suitable for the sensor used in relation to biomass and N-status traits. Grain yield was mostly in the expected range and inconsistently higher in VR compared to ST. In contrast, N fertilizer application was reduced in the VR treatments between 5 and 40% depending on the field heterogeneity. The study showed that the methods used provided a good base to implement variable rate fertilizer application in small to medium scale agricultural systems. In the majority of the case studies, NUE was improved around 10% by redistributing and reducing the amount of N fertilizer applied. However, the prediction of the N-mineralisation in the soil and related N-uptake by the plants remains to be better understood to further optimize in-season N-fertilization.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像とスペクトル植生指数を用いて作物バイオマスおよびN状態を推定し、その感度を2作期で検証しており、植物形質取得・検証が実質的な構成要素である。
abstractThe data of two growing seasons (2017/2018 and 2018/2019) were used to validate the sensitivity of spectral vegetation indices (SVI) suitable for the sensor used in relation to biomass and N-status traits.
Reproduction assets foundThe article includes an explicit data availability statement depositing the plant and spectral data supporting the study's phenotyping measurements in the public ETH Research Collection repository, making it a paper-specific, publicly actionable asset. Supplementary XLSX files also exist but the repository deposit is aDataset · publicThe plant and spectral data that support the findings of this study, as well as the supplementary material, are available in the online repository with the identifier, https://doi.org/10.3929/ethz-b-000380508 . At https://www.research-collection.ethz.ch/handle/20.500.11850/380508 last accessed [09/06/2020].Open asset ↗10.3929/ethz-b-000380508lines:160-271Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Background Phosphorus (P) is an important in ensuring plant morphogenesis and grain quality, therefore an efficient root system is crucial for P-uptake. Identification of useful loci for root morphological and P uptake related traits at seedling stage is important for wheat breeding. The aims of this study were to evaluate phenotypic diversity of Yangmai 16/Zhongmai 895 derived doubled haploid (DH) population for root system architecture (RSA) and biomass related traits (BRT) in different P treatments at seedling stage using hydroponic culture, and to identify QTL using 660 K SNP array based high-density genetic map. Results All traits showed significant variations among the DH lines with high heritabilities (0.76 to 0.91) and high correlations (r = 0.59 to 0.98) among all traits. Inclusive composite interval mapping (ICIM) identified 34 QTL with 4.64-20.41% of the phenotypic variances individually, and the log of odds (LOD) values ranging from 2.59 to 10.43. Seven QTL clusters (C1 to C7) were mapped on chromosomes 3DL, 4BS, 4DS, 6BL, 7AS, 7AL and 7BL, cluster C5 on chromosome 7AS (AX-109955164 - AX-109445593) with pleiotropic effect played key role in modulating root length (RL), root tips number (RTN) and root surface area (ROSA) under low P condition, with the favorable allele from Zhongmai 895. Conclusions This study carried out an imaging pipeline-based rapid phenotyping of RSA and BRT traits in hydroponic culture. It is an efficient approach for screening of large populations under different nutrient conditions. Four QTL on chromosomes 6BL (2) and 7AL (2) identified in low P treatment showed positive additive effects contributed by Zhongmai 895, indicating that Zhongmai 895 could be used as parent for P-deficient breeding. The most stable QTL QRRS.caas-4DS for ratio of root to shoot dry weight (RRS) harbored the stable genetic region with high phenotypic effect, and QTL clusters on 7A might be used for speedy selection of genotypes for P-uptake. SNPs closely linked to QTLs and clusters could be used to improve nutrient-use efficiency.
Why it matches plant phenotyping methods水耕条件下の根系形態とバイオマスを画像パイプラインで迅速に測定し、大規模集団・異なる栄養条件のスクリーニングに用いる方法が明示されており、表現型取得が実質的な役割を持つ。
abstractThis study carried out an imaging pipeline-based rapid phenotyping of RSA and BRT traits in hydroponic culture.
Reproduction assets foundThe paper deposits its phenotype dataset (root system architecture and biomass-related trait measurements of the Yangmai 16/Zhongmai 895 DH population under three phosphorus treatments) in a Dryad repository with an explicit public sharing link and DOI. No author analysis code or trained models are reported.Dataset · publicThe datasets are available in the “Dataset Yang et al.” repository at Dryad data bank. Data can be accessed using following link; https://datadryad.org/stash/share/BTR6YCbZX1mr-vH5QojHRYlPHe4uZ5vWSsGmVE2jbPkOpen asset ↗Dryadlines:146-205Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Summary The root economics space is a useful framework for plant ecology but is rarely considered for crop ecophysiology. In order to understand root trait integration in winter wheat, we combined functional phenomics with trait economic theory, utilizing genetic variation, high‐throughput phenotyping, and multivariate analyses. We phenotyped a diversity panel of 276 genotypes for root respiration and architectural traits using a novel high‐throughput method for CO 2 flux and the open‐source software RhizoVision Explorer to analyze scanned images. We uncovered substantial variation in specific root respiration (SRR) and specific root length (SRL), which were primary indicators of root metabolic and structural costs. Multiple linear regression analysis indicated that lateral root tips had the greatest SRR, and the residuals from this model were used as a new trait. Specific root respiration was negatively correlated with plant mass. Network analysis, using a Gaussian graphical model, identified root weight, SRL, diameter, and SRR as hub traits. Univariate and multivariate genetic analyses identified genetic regions associated with SRR, SRL, and root branching frequency, and proposed gene candidates. Combining functional phenomics and root economics is a promising approach to improving our understanding of crop ecophysiology. We identified root traits and genomic regions that could be harnessed to breed more efficient crops for sustainable agroecosystems.
Why it matches plant phenotyping methods根の呼吸と構造を対象に、CO2フラックスの新規ハイスループット法と画像解析ソフトウェアを用いた機能的フェノミクスを中心的に実施しており、植物形質取得法が研究の主要部分である。
abstractWe phenotyped a diversity panel of 276 genotypes for root respiration and architectural traits using a novel high‐throughput method for CO 2 flux and the open‐source software RhizoVision Explorer to analyze scanned images.
Reproduction assets foundThe paper explicitly deposits its trait data, GEMMA GWAS output, and R analysis scripts at Zenodo (10.5281/zenodo.4247894), and separately deposits the root respiration measurement protocol and flux-calculation R scripts at Zenodo (10.5281/zenodo.4247873). Both are paper-specific, public, and actionable. The Triticeae-Dataset · publicAll trait data, gemma output, and R analysis scripts necessary for the statistical analysis and plotting are publicly available at https://doi.org/10.5281/zenodo.4247894 (Guo et al.,
2020b ).Open asset ↗Zenodo · 10.5281/zenodo.4247894lines:608-654Code · publicThe protocol for the root respiration measurements and the R script for calculating total flux from a directory of text files are available at https://doi.org/10.5281/zenodo.4247873 (Guo et al.,
2020a ).Open asset ↗Zenodo · 10.5281/zenodo.4247873lines:85-97Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
ABSTRACT The root system is critical for the survival of nearly all land plants and a key target for improving abiotic stress tolerance, nutrient accumulation, and yield in crop species. Although many methods of root phenotyping exist, within field studies one of the most popular methods is the extraction and measurement of the upper portion of the root system, known as the root crown, followed by trait quantification based on manual measurements or 2D imaging. However, 2D techniques are inherently limited by the information available from single points of view. Here, we used X-ray computed tomography to generate highly accurate 3D models of maize root crowns and created computational pipelines capable of measuring 71 features from each sample. This approach improves estimates of the genetic contribution to root system architecture, and is refined enough to detect various changes in global root system architecture over developmental time as well as more subtle changes in root distributions as a result of environmental differences. We demonstrate that root pulling force, a high-throughput method of root extraction that provides an estimate of root biomass, is associated with multiple 3D traits from our pipeline. Our combined methodology can therefore be used to calibrate and interpret root pulling force measurements across a range of experimental contexts, or scaled up as a stand-alone approach in large genetic studies of root system architecture.
Why it matches plant phenotyping methodsトウモロコシ根系を対象に、X線CTによる3Dモデル化と計算パイプラインで71形質を抽出し、根引抜き力との較正・解釈まで行う、中心的な表現型計測手法研究である。
abstractHere, we used X-ray computed tomography to generate highly accurate 3D models of maize root crowns and created computational pipelines capable of measuring 71 features from each sample.
Reproduction assets foundThe paper states that the authors' scripts for X-ray CT image processing and root feature extraction (batch-segmentation, batch-skeleton) are publicly available in the Topp-Roots-Lab GitHub repository. Raw phenotype data is said to be in Supplemental File 1, but no public URL for it is provided in the supplied blocks.Code · publicestimated by taking the 2D projection of the 3D volume, then
185 calculated using a similar approach to that described in Grift et al., 2011. DensityS features are
186 computationally similar to plant compactness traits described in Yang et al., 2014. Scripts used
187 for image processing and feature extraction are available at https://github.com/Topp-Roots-Lab/
188
189 Statistical Analysis
190
191 All downstream (i.e. post feature extraction) analysis was performed in the R statistical
192 computing environment. Initially, principal component analysis using all 71 3D roots traits was
193 used to identify large outliers, leading to the removal of 2 samples in the G2F 2017 data and 3
19Open asset ↗Topp-Roots-Labpdf-layout-page:5 lines:1-56Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Plant height (PH) is an essential trait in the screening of most crops. While in crops such as wheat, medium stature helps reduce lodging, tall plants are preferred to increase total above-ground biomass. PH is an easy trait to measure manually, although it can be labor-intense depending on the number of plots. There is an increasing demand for alternative approaches to estimate PH in a higher throughput mode. Crop surface models (CSMs) derived from dense point clouds generated via aerial imagery could be used to estimate PH. This study evaluates PH estimation at different phenological stages using plot-level information from aerial imaging-derived 3D CSM in wheat inbred lines during two consecutive years. Multi-temporal and high spatial resolution images were collected by fixed-wing (PlatFW) and multi-rotor (PlatMR) unmanned aerial vehicle (UAV) platforms over two wheat populations (50 and 150 lines). The PH was measured and compared at four growth stages (GS) using ground-truth measurements (PHground) and UAV-based estimates (PHaerial). The CSMs generated from the aerial imagery were validated using ground control points (GCPs) as fixed reference targets at different heights. The results show that PH estimations using PlatFW were consistent with those obtained from PlatMR, showing some slight differences due to image processing settings. The GCPs heights derived from CSM showed a high correlation and low error compared to their actual heights (R2 ≥ 0.90, RMSE ≤ 4 cm). The coefficient of determination (R2) between PHground and PHaerial at different GS ranged from 0.35 to 0.88, and the root mean square error (RMSE) from 0.39 to 4.02 cm for both platforms. In general, similar and higher heritability was obtained using PHaerial across different GS and years and ranged according to the variability, and environmental error of the PHground observed (0.06–0.97). Finally, we also observed high Spearman rank correlations (0.47–0.91) and R2 (0.63–0.95) of PHaerial adjusted and predicted values against PHground values. This study provides an example of the use of UAV-based high-resolution RGB imagery to obtain time-series estimates of PH, scalable to tens-of-thousands of plots, and thus suitable to be applied in plant wheat breeding trials.
Why it matches plant phenotyping methodsUAV-RGB画像と3D作物表面モデルによるコムギ草丈推定法を開発・検証し、地上測定との比較、精度評価、複数プラットフォーム間の検証を行っており、表現型取得手法が研究の中心である。
abstractThis study evaluates PH estimation at different phenological stages using plot-level information from aerial imaging-derived 3D CSM in wheat inbred lines during two consecutive years.
Reproduction assets foundThe paper's authors publicly deposited the R scripts used for UAV image analysis and plant-height trait extraction on GitHub. The raw phenotyping data are only available on request. Pix4D support articles and the R boot package are generic third-party resources, not paper-specific assets.Code · publicThe PHaerial scripts used to perform the image analyses and trait extract are available at https://github.com/volpatoo/HTP-via-drone-imagery/tree/master/UAV-HTP_PlantHeightOpen asset ↗volpatoo/HTP-via-drone-imagery · UAV-HTP_PlantHeightlines:519-573Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Crop improvement for Nitrogen Use Efficiency (NUE) requires a well-defined phenotype and genotype, especially for different N-forms. As N-supply enhances growth, we comprehensively evaluated 25 commonly measured phenotypic parameters for N response using 4 N treatments in six indica rice genotypes. For this, 32 replicate potted plants were grown in the green-house on nutrient-depleted sand. They were fertilized to saturation with media containing either nitrate or urea as the sole N source at normal (15 mM N) or low level (1.5 mM N). The variation in N-response among genotypes differed by N form/dose and increased developmentally from vegetative to reproductive parameters. This indicates survival adaptation by reinforcing variation in every generation. Principal component analysis segregated vegetative parameters from reproduction and germination. Analysis of variance revealed that relative to low level, normal N facilitated germination, flowering and vegetative growth but limited yield and NUE. Network analysis for the most connected parameters, their correlation with yield and NUE, ranking by Feature selection and validation by Partial least square discriminant analysis enabled shortlisting of eight parameters for NUE phenotype. It constitutes germination and flowering, shoot/root length and biomass parameters, six of which were common to nitrate and urea. Field-validation confirmed the NUE differences between two genotypes chosen phenotypically. The correspondence between multiple approaches in shortlisting parameters for NUE makes it a novel and robust phenotyping methodology of relevance to other plants, nutrients or other complex traits. Thirty-Four N-responsive genes associated with the phenotype have also been identified for genotypic characterization of NUE.
Why it matches plant phenotyping methodsNUEの複合形質を定義・選抜するため、複数形質の評価、特徴選択、統計解析、フィールド検証を統合したフェノタイピング手法が中心的に開発・検証されている。
abstractNetwork analysis for the most connected parameters, their correlation with yield and NUE, ranking by Feature selection and validation by Partial least square discriminant analysis enabled shortlisting of eight parameters for NUE phenotype.
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 3
Mean values of the measured 25 phenotypic parameters in nitrate/urea sources and normal (15 mM) or low (1.5 mM) doses.Open asset ↗lines:557-644Code / dataset availability confirmedCrossref · Europe PMC · checked 9 Sept 2026
Crop mixtures are often beneficial in crop rotations to enhance resource utilization and yield stability. While targeted management, dependent on the local species composition, has the potential to increase the crop value, it comes at a higher expense in terms of field surveys. As fine-grained species distribution mapping of within-field variation is typically unfeasible, the potential of targeted management remains an open research area. In this work, we propose a new method for determining the biomass species composition from high resolution color images using a DeepLabv3+ based convolutional neural network. Data collection has been performed at four separate experimental plot trial sites over three growing seasons. The method is thoroughly evaluated by predicting the biomass composition of different grass clover mixtures using only an image of the canopy. With a relative biomass clover content prediction of R2 = 0.91, we present new state-of-the-art results across the largely varying sites. Combining the algorithm with an all terrain vehicle (ATV)-mounted image acquisition system, we demonstrate a feasible method for robust coverage and species distribution mapping of 225 ha of mixed crops at a median capacity of 17 ha per hour at 173 images per hectare.
Why it matches plant phenotyping methods高解像度カラー画像とCNNにより作物群落の種構成・バイオマス組成を推定する手法を開発し、複数地点・年で評価しているため、植物表現型取得・推定が中心である。
abstractwe propose a new method for determining the biomass species composition from high resolution color images using a DeepLabv3+ based convolutional neural network.
Reproduction assets foundThe paper's phenotyping analysis (canopy segmentation and biomass clover-content prediction) is trained and evaluated on the publicly available GrassClover dataset, explicitly linked in the Data Availability Statement. The DeepLab GitHub repository is a generic third-party model library, not a paper-specific asset, andDataset · publicPublicly available datasets were analyzed in this study. This data [ 16 ] can be found here: https://vision.eng.au.dk/grass-clover-dataset .Open asset ↗lines:627-638Code / dataset availability confirmedEurope PMC · OpenAlex · checked 13 Sept 2026
Premise Measuring plant productivity is critical to understanding complex community interactions. Many traditional methods for estimating productivity, such as direct measurements of biomass and cover, are resource intensive, and remote sensing techniques are emerging as viable alternatives. Methods We explore drone-based remote sensing tools to estimate productivity in a tallgrass prairie restoration experiment and evaluate their ability to predict direct measures of productivity. We apply these various productivity measures to trace the evolution of plant productivity and the traits underlying it. Results The correlation between remote sensing data and direct measurements of productivity varies depending on vegetation diversity, but the volume of vegetation estimated from drone-based photogrammetry is among the best predictors of biomass and cover regardless of community composition. The commonly used normalized difference vegetation index (NDVI) is a less accurate predictor of biomass and cover than other equally accessible vegetation indices. We found that the traits most strongly correlated with productivity have lower phylogenetic signal, reflecting the fact that high productivity is convergent across the phylogeny of prairie species. This history of trait convergence connects phylogenetic diversity to plant community assembly and succession. Discussion Our study demonstrates (1) the importance of considering phylogenetic diversity when setting management goals in a threatened North American grassland ecosystem and (2) the utility of remote sensing as a complement to ground measurements of grassland productivity for both applied and fundamental questions.
Why it matches plant phenotyping methodsドローン遠隔センシングとフォトグラメトリで植物群落の生産性・バイオマス・被覆を推定し、地上測定との予測性能を比較検証しており、植物形質取得手法が中心的です。
abstractWe explore drone-based remote sensing tools to estimate productivity in a tallgrass prairie restoration experiment and evaluate their ability to predict direct measures of productivity.
Reproduction assets foundThe authors publicly deposited the scripts and data used in this drone-based prairie phenotyping study (biomass, cover, vegetation index measurements, trait data) on GitHub and archived on Zenodo, with explicit availability statements and URLs in the article.Dataset · publicraw measurements can be found in the data sets provided in GitHub ( https://github.com/lanescher/prairie-remote-sensing-2020/tree/master/DATA )Open asset ↗https://github.com/lanescher/prairie-remote-sensing-2020/tree/master/DATAlines:88-96Code · publicScripts and data used in these analyses, as well as all supplements referenced in this article, are available on GitHub ( https://github.com/lanescher/prairie‐remote‐sensing‐2020 ) and on Zenodo ( https://doi.org/10.5281/zenodo.3981500 ; Scher et al., 2020 ).Open asset ↗https://github.com/lanescher/prairie‐remote‐sensing‐2020lines:956-978Dataset · publicScripts and data used in these analyses, as well as all supplements referenced in this article, are available on GitHub ( https://github.com/lanescher/prairie‐remote‐sensing‐2020 ) and on Zenodo ( https://doi.org/10.5281/zenodo.3981500 ; Scher et al., 2020 ).Open asset ↗https://doi.org/10.5281/zenodo.3981500 · 10.5281/zenodo.3981500lines:956-978Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Abstract Plant interactions are as important belowground as aboveground. Belowground plant interactions are however inherently difficult to quantify, as roots of different species are difficult to disentangle. Although for a couple of decades molecular techniques have been successfully applied to quantify root abundance, root identification and quantification in multispecies plant communities remains particularly challenging. Here we present a novel methodology, multispecies genotyping by sequencing (msGBS), as a next step to tackle this challenge. First, a multispecies meta‐reference database containing thousands of gDNA clusters per species is created from GBS derived High Throughput Sequencing (HTS) reads. Second, GBS derived HTS reads from multispecies root samples are mapped to this meta‐reference which, after a filter procedure to increase the taxonomic resolution, allows the parallel quantification of multiple species. The msGBS signal of 111 mock‐mixture root samples, with up to 8 plant species per sample, was used to calculate the within‐species abundance. Optional subsequent calibration yielded the across‐species abundance. The within‐ and across‐species abundances highly correlated ( R 2 range 0.72–0.94 and 0.85–0.98, respectively) to the biomass‐based species abundance. Compared to a qPCR based method which was previously used to analyse the same set of samples, msGBS provided similar results. Additional data on 11 congener species groups within 105 natural field root samples showed high taxonomic resolution of the method. msGBS is highly scalable in terms of sensitivity and species numbers within samples, which is a major advantage compared to the qPCR method and advances our tools to reveal hidden belowground interactions.
Why it matches plant phenotyping methods根サンプル中の各植物種の相対 abundance（バイオマスに対応する植物状態）を定量する分子ベースの測定法を開発し、模擬試料および自然試料で検証しているため、方法中心の植物フェノタイピング研究と判断します。
abstractHere we present a novel methodology, multispecies genotyping by sequencing (msGBS), as a next step to tackle this challenge.
Reproduction assets foundThe paper's msGBS analysis scripts are publicly available on GitHub, and metadata underlying the study are deposited on Dryad; both are explicitly stated in the Data Availability Statement with authors' public URLs.Code · publicAll scripts used were made available on GitHub ( https://github.com/NielsWagemaker/scripts_msGBS/tree/msGBS-1.0 ).Open asset ↗GitHub · NielsWagemaker/scripts_msGBSlines:804-868Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
High-throughput phenotyping platforms provide valuable opportunities to investigate biomass and drought-adaptive traits. We explored the capacity of traits associated with drought adaptation such as aerial measurements of the Normalized Difference Vegetation Index (NDVI) and carbon isotope composition (δ13C) determined at the leaf level to predict genetic variation in biomass. A panel of 248 elite durum wheat accessions was grown at the Maricopa Phenotyping platform (US) under well-watered conditions until anthesis, and then irrigation was stopped and plot biomass was harvested about three weeks later. Globally, the δ13C values increased from the first to the second sampling date, in keeping with the imposition of progressive water stress. Additionally, δ13C was negatively correlated with final biomass, and the correlation increased at the second sampling, suggesting that accessions with lower water-use efficiency maintained better water status and, thus, performed better. Flowering time affected NDVI predictions of biomass, revealing the importance of developmental stage when measuring the NDVI and the effect that phenology has on its accuracy when monitoring genotypic adaptation to specific environments. The results indicate that in addition to choosing the optimal phenotypic traits, the time at which they are assessed, and avoiding a wide genotypic range in phenology is crucial.
Why it matches plant phenotyping methodsNDVIおよび炭素同位体組成を用いたバイオマス・干ばつ適応形質の推定性能と測定時期の影響を評価しており、表現型取得法の応用・技術評価が中心である。
titleCarbon Isotope Composition and the NDVI as Phenotyping Approaches for Drought Adaptation in Durum Wheat: Beyond Trait Selection
Reproduction assets foundThe paper's Supplementary Materials (hosted at the MDPI URL listed in allowed_urls) contain paper-specific phenotyping assets: Table S1 (flowering time/phenological stage data for the 248 accessions), Tables S2–S3 (linear regressions of biomass vs. NDVI and biomass vs. δ13C), and Figure S1 (image of the field trial at Supplement · publicAgronomy 2020, 10, 1679 16 of 19
these traits are evaluated and (2) genotypic variability in intrinsic characteristics, such as phenology,
is accounted for.
Supplementary Materials: The following are available online at http://www.mdpi.com/2073-4395/10/11/1679/s1,
Table S1: Number of accessions at different flowering times and phenological stages, Table S2: Linear regression
of the relationship between the biomass at mid grain filling and the NDVI, Table S3: Linear regression of the
relationship between the biomass and δ13C in the flag leaf dry matter sampled before imposition of stressOpen asset ↗mdpi.compdf-raw-page:16 lines:1-55Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Field / plotLeafWhole plant / canopy / plot / fieldVisualization / data managementBiomass / plant weightLeaf traitsPlant / canopy height
Abstract. The development and validation of hydroecological land-surface models to simulate agricultural areas require extensive data on weather, soil properties, agricultural management, and vegetation states and fluxes. However, these comprehensive data are rarely available since measurement, quality control, documentation, and compilation of the different data types are costly in terms of time and money. Here, we present a comprehensive dataset, which was collected at four agricultural sites within the Rur catchment in western Germany in the framework of the Transregional Collaborative Research Centre 32 (TR32) “Patterns in Soil–Vegetation–Atmosphere Systems: Monitoring, Modeling and Data Assimilation”. Vegetation-related data comprise fresh and dry biomass (green and brown, predominantly per organ), plant height, green and brown leaf area index, phenological development state, nitrogen and carbon content (overall > 17 000 entries), and masses of harvest residues and regrowth of vegetation after harvest or before planting of the main crop (> 250 entries). Vegetation data including LAI were collected in frequencies of 1 to 3 weeks in the years 2015 until 2017, mostly during overflights of the Sentinel 1 and Radarsat 2 satellites. In addition, fluxes of carbon, energy, and water (> 180 000 half-hourly records) measured using the eddy covariance technique are included. Three flux time series have simultaneous data from two different heights. Data on agricultural management include sowing and harvest dates as well as information on cultivation, fertilization, and agrochemicals (27 management periods). The dataset also includes gap-filled weather data (> 200 000 hourly records) and soil parameters (particle size distributions, carbon and nitrogen content; > 800 records). These data can also be useful for development and validation of remote-sensing products. The dataset is hosted at the TR32 database (https://www.tr32db.uni-koeln.de/data.php?dataID=1889, last access: 29 September 2020) and has the DOI https://doi.org/10.5880/TR32DB.39 (Reichenau et al., 2020).
Why it matches plant phenotyping methods植物のバイオマス、草丈、LAI、フェノロジーなどの再利用可能な形質データを含む包括的データセットを構築し、リモートセンシング手法の開発・検証にも利用できるため、植物フェノタイピングデータセットとして中心的です。
abstractHere, we present a comprehensive dataset, which was collected at four agricultural sites within the Rur catchment in western Germany
Reproduction assets foundThis is a data description paper whose core contribution is a public plant-phenotyping dataset (vegetation states, biomass, LAI, phenology, fluxes, weather, management, soil) hosted at the TR32 database with a DOI. The dataset is directly downloadable via the authors' public URLs; no code or models are described.Dataset · publicments start with “#”. Comments can contain additional
information on yield, management of harvest residues, additional contents of
agrochemicals, etc.
9 Data availability
The dataset can be downloaded from the TR32
database ( https://www.tr32db.uni-koeln.de/data.php?dataID=1889 , last access: 29 September 2020) or using
the DOI https://doi.org/10.5880/TR32DB.39 (Reichenau et al., 2020). The dataset is provided as a zip-compressed
container. All files are plain text files organized in a folder per site as
shown in Fig. 2 and as explained in Sect. 3. Technical details on file
formats and data structure within files are presented for the different kinds
of data in Sects. 4.4, 5.4, 6.4, 7Open asset ↗TR32DB · 10.5880/TR32DB.39lines:1217-1303Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
Elucidating genotype-by-environment interactions and partitioning its contribution to phenotypic variation remains a challenge for plant scientists. We propose a framework that utilizes genome-wide markers to model genotype-specific shoot growth trajectories as a function of time and soil water availability. A rice diversity panel was phenotyped daily for 21 d using an automated, high-throughput image-based, phenotyping platform that enabled estimation of daily shoot biomass and soil water content. Using these data, we modeled shoot growth as a function of time and soil water content, and were able to determine the time point where an inflection in the growth trajectory occurred. We found that larger, more vigorous plants exhibited an earlier repression in growth compared with smaller, slow-growing plants, indicating a trade-off between early vigor and tolerance to prolonged water deficits. Genomic inference for model parameters and time of inflection (TOI) identified several candidate genes. This study is the first to utilize a genome-enabled growth model to study drought responses in rice, and presents a new approach to jointly model dynamic morpho-physiological responses and environmental covariates.
Why it matches plant phenotyping methods自動画像計測による日次シュートバイオマス推定データを用い、動的な植物表現型応答をモデル化する新しいゲノム対応成長モデルを提案しており、表現型解析ワークフローが中心的です。
abstractWe propose a framework that utilizes genome-wide markers to model genotype-specific shoot growth trajectories as a function of time and soil water availability.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicAll data and codes used in this study can be accessed at https://github.com/malachycampbell/RiceCGM/tree/master .Open asset ↗malachycampbell/RiceCGMlines:109-215Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 14 Sept 2026
Monitoring biomass of forages in experimental plots and livestock farms is a time-consuming, expensive, and biased task. Thus, non-destructive, accurate, precise, and quick phenotyping strategies for biomass yield are needed. To promote high-throughput phenotyping in forages, we propose and evaluate the use of deep learning-based methods and UAV (Unmanned Aerial Vehicle)-based RGB images to estimate the value of biomass yield by different genotypes of the forage grass species Panicum maximum Jacq. Experiments were conducted in the Brazilian Cerrado with 110 genotypes with three replications, totaling 330 plots. Two regression models based on Convolutional Neural Networks (CNNs) named AlexNet and ResNet18 were evaluated, and compared to VGGNet—adopted in previous work in the same thematic for other grass species. The predictions returned by the models reached a correlation of 0.88 and a mean absolute error of 12.98% using AlexNet considering pre-training and data augmentation. This proposal may contribute to forage biomass estimation in breeding populations and livestock areas, as well as to reduce the labor in the field.
Why it matches plant phenotyping methods飼料作物のバイオマス収量をUAV画像とCNNで推定する手法を提案・評価しており、植物形質取得が研究の中心である。
abstractTo promote high-throughput phenotyping in forages, we propose and evaluate the use of deep learning-based methods and UAV (Unmanned Aerial Vehicle)-based RGB images to estimate the value of biomass yield by different genotypes of the forage grass species Panicum maximum Jacq.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicFigure 2 shows the plot’s definition procedure. We developed a python script tool (https://github.Open asset ↗pdf-page:3 lines:1-53Code / dataset availability confirmedOpenAlex · Europe PMC · checked 14 Sept 2026
Increasing dry matter yield is the most important objective in perennial ryegrass breeding program. Current yield assessment methods are time-consuming and subjective. These assessments involve multiple measurements and selection procedures across seasons and years to evaluate biomass yield repeatedly. This contributes to the slow process of new cultivar development and commercialisation. This study developed and validated a computational phenotyping workflow for image acquisition, processing and analysis of spaced planted ryegrass and investigated sensor-based dry matter yield (DMY) yield estimation of individual plants through normalised difference vegetative index (NDVI) and ultrasonic plant height data extraction. The DMY of 48,000 individual plants representing fifty advanced breeding lines and commercial cultivars was accurately estimated at multiple harvests across the growing season. NDVI, plant height and predicted DMY obtained from aerial and ground-based sensors illustrated the variation within and between cultivars across different seasons. Combining NDVI and plant height of individual plants was a robust method to enable high-throughput phenotyping of biomass yield in ryegrass breeding. Similarly, the plot-level model indicated good to high-correlation between the predicted and measured DMY across three seasons with R² between 0.19- 0.81 and root mean square errors (RMSE) values ranging from 0.09-0.21 kg/plot. The model was further validated using a combined regression of the three seasons harvests. This study further sets a foundation for the application of sensor technologies combined with genomic studies that lead to greater rates of genetic gain in perennial ryegrass biomass yield.
Why it matches plant phenotyping methods植物バイオマス収量を推定する画像・センサー・計算ワークフローの開発と検証が研究の中心であり、高スループット表現型解析手法として明確に該当する。
abstractThis study developed and validated a computational phenotyping workflow for image acquisition, processing and analysis of spaced planted ryegrass
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicAll datasets generated for this study are included in the article/ Supplementary Material .Open asset ↗lines:407-424Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Shrub encroachment in seminatural grasslands threatens local biodiversity unless management is applied to reduce shrub density. Dense vegetation of Cytisus scoparius homogenizes the landscape negatively affecting local plant diversity. Detecting structural change (e.g., biomass) is essential for assessing negative impacts of encroachment. Hence, exploring new monitoring tools to achieve this task is important for effectively capturing change and evaluating management activities.This study combines traditional field-based measurements with novel Light Detection and Ranging (LiDAR) observations from an Unmanned Aircraft System (UAS). We investigate the accuracy of mapping C. scoparius in three dimensions (3D) and of structural change metrics (i.e., biomass) derived from ultrahigh-density point cloud data (>1,000 pts/m 2 ). Presence-absence of 12 shrub or tree genera was recorded across a 6.7 ha seminatural grassland area in Denmark. Furthermore, 10 individuals of C. scoparius were harvested for biomass measurements. With a UAS LiDAR system, we collected ultrahigh-density spatial data across the area in October 2017 (leaf-on) and April 2018 (leaf-off). We utilized a 3D point-based classification to distinguish shrub genera based on their structural appearance (i.e., density, light penetration, and surface roughness).From the identified C. scoparius individuals, we related different volume metrics (mean, max, and range) to measured biomass and quantified spatial variation in biomass change from 2017 to 2018. We obtained overall classification accuracies above 86% from point clouds of both seasons. Maximum volume explained 77.4% of the variation in biomass.The spatial patterns revealed landscape-scale variation in biomass change between autumn 2017 and spring 2018, with a notable decrease in some areas. Further studies are needed to disentangle the causes of the observed decrease, for example, recent winter grazing and/or frost events. Synthesis and applications: We present a workflow for processing ultrahigh-density spatial data obtained from a UAS LiDAR system to detect change in C. scoparius . We demonstrate that UAS LiDAR is a promising tool to map and monitor grassland shrub dynamics at the landscape scale with the accuracy needed for effective nature management. It is a new tool for standardized and nonbiased evaluation of management activities initiated to prevent shrub encroachment.
Why it matches plant phenotyping methodsUAS LiDARによる植物群落・低木の3D構造とバイオマスを推定する処理ワークフローを開発・精度評価しており、植物形質取得が研究の中心である。
abstractWe investigate the accuracy of mapping C. scoparius in three dimensions (3D) and of structural change metrics (i.e., biomass) derived from ultrahigh-density point cloud data (>1,000 pts/m 2 ).
Reproduction assets foundThe paper's UAS LiDAR point clouds, field presence-absence records, and harvested shrub biomass measurements are explicitly deposited in the Dryad Data Repository with a public DOI link, making the paper-specific phenotyping data directly actionable.Dataset · publicDATA AVAILABILITY STATEMENT
The data used in this study are available through the Dryad Data Repository: https://doi.org/10.5061/dryad.547d7wm55 .Open asset ↗Dryad Data Repository · 10.5061/dryad.547d7wm55lines:280-396Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
Genetic selection for whole-plant water use efficiency (yield per transpiration; WUE plant ) in any crop-breeding programme requires high-throughput phenotyping of component traits of WUE plant such as intrinsic water use efficiency (WUE i ; CO 2 assimilation rate per stomatal conductance). Measuring WUE i by gas exchange measurements is laborious and time consuming and may not reflect an integrated WUE i over the life of the leaf. Alternatively, leaf carbon stable isotope composition (δ 13 C leaf ) has been suggested as a potential time-integrated proxy for WUE i that may provide a tool to screen for WUE plant . However, a genetic link between δ 13 C leaf and WUE plant in a C 4 species has not been well established. Therefore, to determine if there is a genetic relationship in a C 4 plant between δ 13 C leaf and WUE plant under well watered and water-limited growth conditions, a high-throughput phenotyping facility was used to measure WUE plant in a recombinant inbred line (RIL) population created between the C 4 grasses Setaria viridis and S. italica. Three quantitative trait loci (QTL) for δ 13 C leaf were found and co-localized with transpiration, biomass accumulation, and WUE plant . Additionally, WUE plant for each of the δ 13 C leaf QTL allele classes was negatively correlated with δ 13 C leaf , as would be predicted when WUE i influences WUE plant . These results demonstrate that δ 13 C leaf is genetically linked to WUE plant , likely to be through their relationship with WUE i , and can be used as a high-throughput proxy to screen for WUE plant in these C 4 species.
Why it matches plant phenotyping methods葉の炭素安定同位体比を全植物体の水利用効率の高スループット代理指標として検証し、WUEとの遺伝的関連を評価しており、表現型取得・スクリーニング法が中心的です。
abstractleaf carbon stable isotope composition (δ 13 C leaf ) has been suggested as a potential time-integrated proxy for WUE i that may provide a tool to screen for WUE plant
Reproduction assets foundThe paper's QTL analysis was performed with the authors' custom Python and R scripts, publicly deposited on GitHub (foxy_qtl_pipeline). No public phenotype dataset URL is stated in the supplied blocks.Code · publicin Feldman et al. (2017); Feldman et al. (2018) were
308
used in this study, and here the methods used are repeated. QTL mapping was
309
performed on day 27 within each treatment group using functions in the R/qtl and
310
funqtl packages (Kwak et al., 2016). The functions were called by a set of custom
311
Python and R scripts (https://github.com/maxjfeldman/foxy_qtl_pipeline). Two
312
complimentary analysis methods were utilized. First, a single QTL model genome
313
scan using Haley-Knott regression was performed to identify QTL exhibiting LOD
314
score peaks greater than a permutation-based significance threshold (α = 0.05, n =
315
1000). Second, a stepwise forward/backward selection proceOpen asset ↗maxjfeldman/foxy_qtl_pipelinepdf-raw-page:11 lines:1-77Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Miscanthus x giganteus (Mxg) is a promising second-generation biofuel crop with high production of energetic biomass. Our aim was to determine the level of plant stress of Mxg grown in poor quality soils using non-invasive physiological parameters and to test whether the stress could be reduced by application of plant growth regulators (PGRs). Plant fitness was quantified by measuring of leaf fluorescence using 24 indexes to select the most suitable fluorescence indicators for quantification of this type of abiotic stress. Simultaneously, visible stress signs were observed on stems and leaves and differences in variants were revealed also by microscopy of leaf sections. Leaf fluorescence analysis, visual observation and changes of leaf anatomy revealed significant stress in all studied subjects compared to those cultivated in good quality soil. Besides commonly used Fv/Fm (potential photosynthetic efficiency) and P.I. (performance index), which showed very low sensitivity, we suggest other fluorescence parameters (like dissipation, DIo/RC) for revealing finer differences. We can conclude that measurement of leaf fluorescence is a suitable method for revealing stress affecting Mxg in poor soils. However, none of investigated parameters proved significant positive effect of PGRs on stress reduction. Therefore, direct improvement of soil quality by fertilization should be considered for stress reduction and improving the biomass quality in this type of soils.
Why it matches plant phenotyping methods葉の蛍光指標を用いた非侵襲的ストレス定量と指標選定が研究目的の中心であり、植物の生理状態を測定するフェノタイピング手法の適用・検証に該当する。
abstractOur aim was to determine the level of plant stress of Mxg grown in poor quality soils using non-invasive physiological parameters
Reproduction assets foundThe paper's supplementary materials hosted on MDPI contain the paper-specific fluorescence index measurements (Table S1 means/SDs for all PGR concentrations, boxplots, experiment photos, climate data), which directly reproduce this study's plant-phenotyping measurements. No author analysis code or trained models are deSupplement · publics established that application of PGRs Stimpo and Regoplant did not reduce the stress level of Mxg, the direct improvement of soil shall be considered for stress reduction.
Acknowledgments
We would like to thank Agrobiotech for providing us with Stimpo and Regoplant.
Supplementary Materials
The following are available online at https://www.mdpi.com/2223-7747/9/2/194/s1 , Table S1: Means and standard deviations of fluorescence indexes for all PGRs concentrations in experiment; Figure S2: Boxplots of fluorescence indexes; Figure S3: Photograph of the experiment; Figure S4: Average month temperatures, precipitation and light period in Ústí nad Labem in 2017.
Click here for additional data file.Open asset ↗lines:96-146Code / dataset availability confirmedEurope PMC · Crossref · OpenAlex · checked 15 Sept 2026
The rapid selection of salinity-tolerant crops to increase food production in salinized lands is important for sustainable agriculture. Recently, high-throughput plant phenotyping technologies have been adopted that use plant morphological and physiological measurements in a non-destructive manner to accelerate plant breeding processes. Here, a hyperspectral imaging (HSI) technique was implemented to monitor the plant phenotypes of 13 okra (Abelmoschus esculentus L.) genotypes after 2 and 7 days of salt treatment. Physiological and biochemical traits, such as fresh weight, SPAD, elemental contents and photosynthesis-related parameters, which require laborious, time-consuming measurements, were also investigated. Traditional laboratory-based methods indicated the diverse performance levels of different okra genotypes in response to salinity stress. We introduced improved plant and leaf segmentation approaches to RGB images extracted from HSI imaging based on deep learning. The state-of-the-art performance of the deep-learning approach for segmentation resulted in an intersection over union score of 0.94 for plant segmentation and a symmetric best dice score of 85.4 for leaf segmentation. Moreover, deleterious effects of salinity affected the physiological and biochemical processes of okra, which resulted in substantial changes in the spectral information. Four sample predictions were constructed based on the spectral data, with correlation coefficients of 0.835, 0.704, 0.609 and 0.588 for SPAD, sodium concentration, photosynthetic rate and transpiration rate, respectively. The results confirmed the usefulness of high-throughput phenotyping for studying plant salinity stress using a combination of HSI and deep-learning approaches.
Why it matches plant phenotyping methodsHSIと深層学習による植物・葉のセグメンテーションおよび生理形質推定が研究の中心であり、高スループット表現型取得手法を実装・評価している。
titleHyperspectral imaging combined with machine learning as a tool to obtain high‐throughput plant salt‐stress phenotyping
Reproduction assets foundThe authors publicly deposited the plant/leaf segmentation models in CodeOcean and the MMD clustering source code on GitHub, both directly supporting this paper's phenotyping analysis. The CVPPP 2015 dataset and Hitachi annotation tool are third-party/generic resources, not paper-specific assets.Code · publicels were constructed using Python3.6 (Guido van Ros-
sum, Python Dev Team).
DATA AVAILABILITY STATEMENT
Data further supporting this work, such as details of plant
and leaf segmentation models used in this study, are open
and available in codeocean (https://doi.org/10.24433/CO.3430273.v1). The source code of MMD is available on
https://github.com/jinnuozhang/Coderoom/blob/master/CLUS
TER.ipynb.
ACKNOWLEDGEMENT
The authors would like to thank Hui Fang for helping in illustrat-
ing.
CONFLICT OF INTEREST
The authors declare no conflicts of interest.
AUTHOR CONTRIBUTIONS
XF designed the research. YH and DJ supervised the pro-
ject. XF, YZ, XY, CY, HW and ZT performed the experi-
ments. QW analyzOpen asset ↗github.com/jinnuozhang/Coderoompdf-raw-page:13 lines:1-89Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · checked 9 Sept 2026
Nitrogen use efficiency (NUE) in crops is generally low, with more than 60% of applied nitrogen (N) being lost to the environment, which increases production costs and affects ecosystems and human habitats. To overcome these issues, the breeding of crop varieties with improved NUE is needed, requiring efficient phenotyping methods along with molecular and genetic approaches. To develop an effective phenotypic screening method, experiments on wheat varieties under various N levels were conducted in the automated phenotyping platform at Plant Phenomics Victoria, Horsham. The results from the initial experiment showed that two relative N levels-5 mM and 20 mM, designated as low and optimum N, respectively-were ideal to screen a diverse range of wheat germplasm for NUE on the automated imaging phenotyping platform. In the second experiment, estimated plant parameters such as shoot biomass and top-view area, derived from digital images, showed high correlations with phenotypic traits such as shoot biomass and leaf area seven weeks after sowing, indicating that they could be used as surrogate measures of the latter. Plant growth analysis confirmed that the estimated plant parameters from the vegetative linear growth phase determined by the "broken-stick" model could effectively differentiate the performance of wheat varieties for NUE. Based on this study, vegetative phenotypic screens should focus on selecting wheat varieties under low N conditions, which were highly correlated with biomass and grain yield at harvest. Analysis indicated a relationship between controlled and field conditions for the same varieties, suggesting that greenhouse screens could be used to prioritise a higher value germplasm for subsequent field studies. Overall, our results showed that this phenotypic screening method is highly applicable and can be applied for the identification of N-efficient wheat germplasm at the vegetative growth phase.
Why it matches plant phenotyping methods自動画像フェノタイピング基盤を用い、デジタル画像から植物形質の推定値を抽出してN利用効率スクリーニング法を開発・評価しており、フェノタイピング手法が研究の中心である。
abstractTo develop an effective phenotypic screening method, experiments on wheat varieties under various N levels were conducted in the automated phenotyping platform at Plant Phenomics Victoria, Horsham.
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 1 , was supplied depending on the crop growth stages (vegetative or reproductive).Open asset ↗lines:306-315Code / dataset availability confirmedCrossref · OpenAlex · Europe PMC · checked 9 Sept 2026
In this paper, we present a novel method for vision based plants phenotyping in indoor vertical farming under artificial lighting. The method combines 3D plants modeling and deep segmentation of the higher leaves, during a period of 25–30 days, related to their growth. The novelty of our approach is in providing 3D reconstruction, leaf segmentation, geometric surface modeling, and deep network estimation for weight prediction to effectively measure plant growth, under three relevant phenotype features: height, weight and leaf area. Together with the vision based measurements, to verify the soundness of our proposed method, we also harvested the plants at specific time periods to take manual measurements, collecting a great amount of data. In particular, we manually collected 2592 data points related to the plant phenotype and 1728 images of the plants. This allowed us to show with a good number of experiments that the vision based methods ensure a quite accurate prediction of the considered features, providing a way to predict plant behavior, under specific conditions, without any need to resort to human measurements.
Why it matches plant phenotyping methods植物フェノタイピングのための3D再構成・葉セグメンテーション・深層学習による形質推定法の開発と手測定による検証が研究の中心である。
abstractwe present a novel method for vision based plants phenotyping in indoor vertical farming under artificial lighting
Reproduction assets foundThe paper's leaf segmentation analysis code (a Tensorflow Mask R-CNN implementation used for the plant phenotyping measurements) is explicitly stated to be freely available on the authors' GitHub organization. The collected image/phenotype dataset (1728 images, 2592 manual data points) is described but no public data-Code · publicWe used our
implementation in Tensorflow, which is freely available on GitHub (See https://github.com/alcor-lab).Open asset ↗alcor-labpdf-page:10 lines:1-109Code / dataset availability confirmedEurope PMC · OpenAlex · bioRxiv · checked 15 Sept 2026
Plant growth response to Arbuscular Mycorrhizal (AM) fungi is variable and depends on genetic and environment factors that still remain largely unknown. Identification of these factors can be envisaged using high-throughput and accurate plant phenotyping. We setup experimental conditions based on a two-compartment system allowing to measure Brachypodium distachyon mycorhizal growth response (MGR) in an automated phenotyping greenhouse. We developed a new image analysis software “IPSO Phen” to estimate of B. distachyon aboveground biomass. We found a positive MGR in the B. distachyon Bd3-1 genotype inoculated with the AM fungi Rhizophagus irregularis only if nitrogen and phosphorus were added together in the compartment restricted to AM fungi. Using this condition, we found genetic diversity in B. distachyon for MGR ranging from positive to negative MGR depending on the plant genotype tested. Our result on the interaction between nitrogen and phosphorus for MGR in B. distachyon opens new perspectives about AM functioning. In addition, our open-source software allowing to test and run image analysis parameters on large amount of images generated by automated plant phenotyping facilities, will help to screen large panels of genotypes and environmental conditions to identify the factors controlling the MGR.
Why it matches plant phenotyping methods自動フェノタイピング温室用の実験系と、画像から地上部バイオマスを推定するソフトウェアを開発しており、植物表現型の取得・抽出法が中心的である。
abstractWe developed a new image analysis software “IPSO Phen” to estimate of B. distachyon aboveground biomass.
Reproduction assets foundThe paper's authors developed IPSO Phen, the image-analysis software used for their Brachypodium phenotyping measurements, and explicitly state its source code is freely available on GitHub at https://github.com/tpmp-inra/ipso_phen. This is a paper-specific, public, actionable analysis-code asset. Supplementary files (Code · publicd
159
Scikit-image. IPSO phen also includes a user interface, access to image database and the
160
possibility to create or import new tools, including some tools already developed in PlantCV
161
for instance. The IPSO phen documentation (https://ipso-162
phen.readthedocs.io/en/latest/installation.html) and the source code
163
(https://github.com/tpmp-inra/ipso_phen) are freely available.
164
Fig. 2a displays the flow chart that was defined and applied on the B. distachyon side images
165
generated in this work. IPSO Phen can the save pipelines as Python scripts (see
166
supplementary files: pipeline_script.py or binary files: pipeline_binary.tipp) that can be used
167
to restore the proceOpen asset ↗tpmp-inra/ipso_phenpdf-raw-page:6 lines:1-68Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · bioRxiv · checked 15 Sept 2026
Collecting useful, interpretable, and biologically relevant phenotypes in a resource-efficient manner is a bottleneck to plant breeding, genetic mapping, and genomic prediction. Autonomous and affordable sub-canopy rovers are an efficient and scalable way to generate sensor-based datasets of in-field crop plants. Rovers equipped with light detection and ranging (LiDar) can produce three-dimensional reconstructions of entire hybrid maize fields. In this study, we collected 2,103 LiDar scans of hybrid maize field plots and extracted phenotypic data from them by Latent Space Phenotyping (LSP). We performed LSP by two methods, principal component analysis (PCA) and a convolutional autoencoder, to extract meaningful, quantitative Latent Space Phenotypes (LSPs) describing whole-plant architecture and biomass distribution. The LSPs had heritabilities of up to 0.44, similar to some manually measured traits, indicating they can be selected on or genetically mapped. Manually measured traits can be successfully predicted by using LSPs as explanatory variables in partial least squares regression, indicating the LSPs contain biologically relevant information about plant architecture. These techniques can be used to assess crop architecture at a reduced cost and in an automated fashion for breeding, research, or extension purposes, as well as to create or inform crop growth models.
Why it matches plant phenotyping methodsLiDARによる圃場全植物の3次元計測と、PCA・畳み込みオートエンコーダによる形態・バイオマス形質抽出が研究の中心であり、育種利用可能性も検証している。
abstractRovers equipped with light detection and ranging (LiDar) can produce three-dimensional reconstructions of entire hybrid maize fields.
Reproduction assets foundThe paper's Data availability statement points to public Bitbucket repositories under bucklerlab containing the authors' analysis code, phenotypic data, and the trained autoencoder model (HDF5). The raw LiDar point clouds are only 'DOI in preparation at CyVerse' and thus not yet actionable.Code · publicle in-
415
field high-throughput phenotyping of crops in numerous locations and across developmental time by
416
reducing the cost of collecting high-quality phenotypic data points.
417
Data availability
418
The raw LiDar point clouds can be found at <DOI in preparation at CyVerse>. Code and phenotypic
419
data are available at https://bitbucket.org/bucklerlab/p_lidar_lsp.420
Author Contributions
421
C.S, G.C., rover design and construction; J.L.G, E.S.B, M.A.G., study conceptualization; J.L.G, E.R.,
422
N.L, N.K, data collection; J.L.G., data analysis; all authors contributed to manuscript preparation or
423
review.
424
Conflicts of Interest
425
Authors C.S. and G.C. are co-founders and theOpen asset ↗bucklerlab/p_lidar_lsp.420pdf-raw-page:14 lines:1-87Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Precise sensor-based non-destructive estimation of crop nitrogen (N) status is essential for low-cost, objective optimization of N fertilization, as well as for early estimation of yield potential and N use efficiency. Several studies assessed the performance of spectral vegetation indices (SVI) for winter wheat ( Triticum aestivum L.), often either for conditions of low N status or across a wide range of the target traits N uptake (Nup), N concentration (NC), dry matter biomass (DM), and N nutrition index (NNI). This study aimed at a critical assessment of the estimation ability depending on the level of the target traits. It included seven years' data with nine measurement dates from early stem elongation until flowering in eight N regimes (0-420 kg N ha -1 ) for selected SVIs. Tested across years, a pronounced date-specific clustering was found particularly for DM and NC. While for DM, only the R900_970 gave moderate but saturated relationships (R 2 = 0.47, p 2 = 0.59, p NC ≈ DM. Depending on the number (n = 1-3) and characteristic of cultivars included, the relationships improved when testing within instead of across cultivars, with the relatively lowest cultivar effect on the estimation of DM and the strongest on NC. For assessing the trait estimation under conditions of high-excessive N fertilization, the range of the target traits was divided into two intervals with NNI values 0.8 (interval 2: high N status). Although better estimations were found in interval 1, useful relationships were also obtained in interval 2 from the best indices (DM: R780_740: average R 2 = 0.35, RMSE = 567 kg ha -1 ; NC: REIP: average R 2 = 0.40, RMSE = 0.25%; NNI: REIP: average R 2 = 0.46, RMSE = 0.10; Nup: REIP: average R 2 = 0.48, RMSE = 21 kg N ha -1 ). While in interval 1, all indices performed rather similarly, the three red edge-based indices were clearly better suited for the three N-related traits. The results are promising for applying SVIs also under conditions of high N status, aiming at detecting and avoiding excessive N use. While in canopies of lower N status, the use of simple NIR/VIS indices may be sufficient without losing much precision, the red edge information appears crucial for conditions of higher N status. These findings can be transferred to the configuration and use of simpler multispectral sensors under conditions of contrasting N status in precision farming.
Why it matches plant phenotyping methods冬コムギのスペクトル植生指数によるN状態・バイオマス等の非破壊推定性能を複数年・品種・施肥条件で批判的に評価しており、センサー型表現型計測と検証が中心である。
abstractPrecise sensor-based non-destructive estimation of crop nitrogen (N) status is essential
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe following are available online at https://www.mdpi.com/1424-8220/19/17/3712/s1 , Supplementary Table S1: Treatment effects of main plot treatment factors; Supplementary Table S2: Treatment effects of N fertilization; Supplementary Table S3: RMSE and mean-normalized RMSE for regressions across main plots; Supplementary Table S4: Significant ( p < 0.05) coefficients of determination (R²) for the whole data and for data subsets; Supplementary Table S5: Index ranking by data and statistical approachOpen asset ↗lines:241-279Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Abstract Afforestation projects for mitigating CO 2 emissions require to monitor the carbon fixation and plant growth as key indicators. We proposed a monitoring method for predicting carbon fixation in afforestation projects, combining a process‐based ecosystem model and field data and addressed the uncertainty of predicted carbon fixation and ecophysiological characteristics with plant growth. Carbon pools were simulated using the Biome‐BGC model tuned by parameter optimization using measured carbon density of biomass pools on an 11‐year‐old Eucommia ulmoides plantation on Loess Plateau, China. The allocation parameters fine root carbon to leaf carbon (FRC:LC) and stem carbon to leaf carbon (SC:LC), along with specific leaf area (SLA) and maximum stomatal conductance ( g smax ) strongly affected aboveground woody (AC) and leaf carbon (LC) density in sensitivity analysis and were selected as adjusting parameters. We assessed the uncertainty of carbon fixation and plant growth predictions by modeling three growth phases with corresponding parameters: (i) before afforestation using default parameters, (ii) early monitoring using parameters optimized with data from years 1 to 5, and (iii) updated monitoring at year 11 using parameters optimized with 11‐year data. The predicted carbon fixation and optimized parameters differed in the three phases. Overall, 30‐year average carbon fixation rate in plantation (AC, LC, belowground woody parts and soil pools) was ranged 0.14–0.35 kg‐C m −2 y −1 in simulations using parameters of phases (i)–(iii). Updating parameters by periodic field surveys reduced the uncertainty and revealed changes in ecophysiological characteristics with plant growth. This monitoring method should support management of afforestation projects by carbon fixation estimation adapting to observation gap, noncommon species and variable growing conditions such as climate change, land use change.
Why it matches plant phenotyping methods植物器官・生態系の炭素固定と成長を推定する監視手法を、プロセスモデルと圃場データ、パラメータ最適化で構築・不確実性評価しており、植物の生理状態推定が中心です。
abstractWe proposed a monitoring method for predicting carbon fixation in afforestation projects, combining a process‐based ecosystem model and field data
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the authors' biometric data for E. ulmoides allometric relationships and the files related to parameter optimization and simulation results on Zenodo, a public repository with a DOI. This is a paper-specific, publicly actionable asset. The NCDC GSOD meteoricalDataset · publicThe biometric data for allometric relationships of E. ulmoides and the files related to optimization and simulation results are available on Zenodo ( https://doi.org/10.5281/zenodo.2815612 ).Open asset ↗Zenodo · 10.5281/zenodo.2815612lines:393-549Code / dataset availability confirmedCrossref · OpenAlex · checked 14 Sept 2026
Climate change is one of the primary culprits behind the restraint in the increase of cereal crop yields. In order to address its effects, effort has been focused on understanding the interaction between genotypic performance and the environment. Recent advances in unmanned aerial vehicles (UAV) have enabled the assembly of imaging sensors into precision aerial phenotyping platforms, so that a large number of plots can be screened effectively and rapidly. However, ground evaluations may still be an alternative in terms of cost and resolution. We compared the performance of red–green–blue (RGB), multispectral, and thermal data of individual plots captured from the ground and taken from a UAV, to assess genotypic differences in yield. Our results showed that crop vigor, together with the quantity and duration of green biomass that contributed to grain filling, were critical phenotypic traits for the selection of germplasm that is better adapted to present and future Mediterranean conditions. In this sense, the use of RGB images is presented as a powerful and low-cost approach for assessing crop performance. For example, broad sense heritability for some RGB indices was clearly higher than that of grain yield in the support irrigation (four times), rainfed (by 50%), and late planting (10%). Moreover, there wasn’t any significant effect from platform proximity (distance between the sensor and crop canopy) on the vegetation indexes, and both ground and aerial measurements performed similarly in assessing yield.
Why it matches plant phenotyping methodsUAV・地上のRGB／マルチスペクトル／熱画像を用いた圃場表現型取得と、プラットフォーム間の性能比較が研究の中心であるため。
abstractRecent advances in unmanned aerial vehicles (UAV) have enabled the assembly of imaging sensors into precision aerial phenotyping platforms, so that a large number of plots can be screened effectively and rapidly.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicregions of interest corresponding to each plot were segmented
and exported using the MosaicTool (Shawn C. Kefauver, https://integrativecropecophysiology.com/
software-development/mosaictool/, https://gitlab.com/sckefauver/MosaicTool, University of Barcelona,
Barcelona, Spain)Open asset ↗sckefauver/MosaicToolpdf-page:4 lines:1-56Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
In the present study we analyzed the responses of wheat to mild salinity and drought with special emphasis on the so far unclarified interaction of these important stress factors by using high-throughput phenotyping approaches. Measurements were performed on 14 genotypes of different geographic origin (Austria, Azerbaijan and Serbia). The data obtained by non-invasive digital RGB imaging of leaf/shoot area reflect well the differences in total biomass measured at the end of the cultivation period demonstrating that leaf/shoot imaging can be reliably used to predict biomass differences among different cultivars and stress conditions. On the other hand, the leaf/shoot area has only a limited potential to predict grain yield. Comparison of gas exchange parameters with biomass accumulation showed that suppression of CO2 fixation due to stomatal closure is the principal cause behind decreased biomass accumulation under drought, salt and drought plus salt stresses. Correlation between grain yield and dry biomass is tighter when salt- and drought stress occur simultaneously than in the well-watered control, or in the presence of only salinity or drought, showing that natural variation of biomass partitioning to grains is suppressed by severe stress conditions. Comparison of yield data show that higher biomass and grain yield can be expected under salt (and salt plus drought) stress from those cultivars which have high yield parameters when exposed to drought stress alone. However, relative yield tolerance under drought stress is not a good indicator of yield tolerance under salt (and salt plus drought) drought stress. Harvest index of the studied cultivars ranged between 0.38-0.57 under well watered conditions and decreased only to a small extent (0.37-0.55) even when total biomass was decreased by 90% under the combined salt plus drought stress. It is concluded that the co-occurrence of mild salinity and drought can induce large biomass and grain yield losses in wheat due to synergistic interaction of these important stress factors. We could also identify wheat cultivars, which show high yield parameters under the combined effects of salinity and drought demonstrating the potential of complex plant phenotyping in breeding for drought and salinity stress tolerance in crop plants.
Why it matches plant phenotyping methods非侵襲RGB画像による葉・シュート面積測定を用いてバイオマス予測の信頼性を評価しており、表現型取得法の応用・技術検証が研究の中心に含まれる。
Reproduction assets foundThe article reports wheat phenotyping measurements (RGB-imaged leaf/shoot area, biomass, grain yield, water use, gas exchange, ETR, proline) for 14 cultivars under four stress treatments. No author analysis code, images, or standalone dataset deposit is mentioned. The only paper-specific public asset is the article's在线Supplement · publicThe Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2019.00501/full#supplementary-material
Click here for additional data file.
References
Addinsoft ( 2019 ). XLSTAT.
Available at: https://www.xlstat.com
Ahn C. H. Hossain M. A. Lee E. Kanth B. K. Park P. B.
( 2018 ).
Increased salt and drought tolerance by D-pinitol production in transgenic Arabidopsis thaliana .
Biochem. Biophys. Res. Commun.
504
315 – 320 .
10.1016Open asset ↗10.3389/fpls.2019.00501lines:178-342Code / dataset availability confirmedEurope PMC · checked 10 Sept 2026
Premise of the study The key to increased cassava production is balancing the trade-off between marketable roots and traits that drive nutrient and water uptake. However, only a small number of protocols have been developed for cassava roots. Here, we introduce a set of new variables and methods to phenotype cassava roots and enhance breeding pipelines. Methods Different cassava genotypes were planted in pot and field conditions under well-watered and drought treatments. We developed cassava shovelomics and used digital imaging of root traits (DIRT) to evaluate geometrical root traits in addition to common traits (e.g., length, number). Results Cassava shovelomics and DIRT were successfully implemented to extract root phenotypes, and a large phenotypic variation for root traits was observed. Significant correlations were found among root traits measured manually and by DIRT. Drought significantly decreased shoot dry weight, total root number, and root length by 84%, 30%, and 25%, respectively. High adventitious root number was associated with increased shoot dry weight ( r = 0.44) under drought. Discussion Our methods allow for high-throughput cassava root phenotyping, which makes a breeding program targeting root traits feasible. We suggest that root number is a breeding target for improved cassava production under drought.
Why it matches plant phenotyping methodsキャッサバ根の表現型取得法（shovelomicsとデジタル画像解析DIRT）の開発・適用・相関検証が研究の中心であり、根形質を抽出する高スループット手法として明示されている。
abstractHere, we introduce a set of new variables and methods to phenotype cassava roots and enhance breeding pipelines.
Reproduction assets foundThe authors explicitly deposit the root images and phenotype data supporting this cassava phenotyping study on CyVerse Data Commons under the identifier Saengwilai_Cassava_2019, with a public DOI link. This is a paper-specific, publicly accessible dataset of the plant images and trait measurements used in the analysis.Dataset · publicThe images and data that support the findings of this study are openly available on CyVerse Data Commons (as Saengwilai_Cassava_2019; https://doi.org/10.25739/ej8x-3b24 ).Open asset ↗CyVerse Data Commons · Saengwilai_Cassava_2019lines:798-1004Code / dataset availability confirmedEurope PMC · checked 10 Sept 2026
Background Wet tropical forests of Chocó, along the Pacific Coast of Colombia, are known for their high plant diversity and endemic species. With increasing pressure of degradation and deforestation, these forests have been prioritized for conservation and carbon offset through Reducing Emissions from Deforestation and forest Degradation (REDD+) mechanisms. We provide the first regional assessment of forest structure and aboveground biomass using measurements from a combination of ground tree inventories and airborne Light Detection and Ranging (Lidar). More than 80,000 ha of lidar samples were collected based on a stratified random sampling to provide a regionally unbiased quantification of forest structure of Chocó across gradients of vegetation structure, disturbance and elevation. We developed a model to convert measurements of vertical structure of forests into aboveground biomass (AGB) for terra firme, wetlands, and mangrove forests. We used the Random Forest machine learning model and a formal uncertainty analysis to map forest height and AGB at 1-ha spatial resolution for the entire pacific coastal region using spaceborne data, extending from the coast to higher elevation of Andean forests. Results Upland Chocó forests have a mean canopy height of 21.8 m and AGB of 233.0 Mg/ha, while wetland forests are characterized by a lower height and AGB (13.5 m and 117.5 Mg/a). Mangroves have a lower mean height than upland forests (16.5 m), but have a similar AGB as upland forests (229.9 Mg/ha) due to their high wood density. Within the terra firme forest class, intact forests have the highest AGB (244.3 ± 34.8 Mg/ha) followed by degraded and secondary forests with 212.57 ± 62.40 Mg/ha of biomass. Forest degradation varies in biomass loss from small-scale selective logging and firewood harvesting to large-scale tree removals for gold mining, settlements, and illegal logging. Our findings suggest that the forest degradation has already caused the loss of more than 115 million tons of dry biomass, or 58 million tons of carbon. Conclusions Our assessment of carbon stocks and forest degradation can be used as a reference for reporting on the state of the Chocó forests to REDD+ projects and to encourage restoration efforts through conservation and climate mitigation policies.
Why it matches plant phenotyping methods航空LiDARと地上インベントリを用いて森林の構造・樹冠高・地上部バイオマスを推定するモデルを開発し、不確実性解析と広域マッピングまで行っており、植物群落の形質取得・推定手法が中心です。
abstractWe provide the first regional assessment of forest structure and aboveground biomass using measurements from a combination of ground tree inventories and airborne Light Detection and Ranging (Lidar).
Reproduction assets foundThe paper's Chocó lidar and field-plot phenotyping/biomass data are stated to be available through the authors' BioREDD project, whose project URL (http://bioredd.org/projects/) is given in the article and is an allowed URL. Other data sources mentioned (ALOS PALSAR, SRTM, Global Wood Density Database, R) are generic外部Dataset · publicData in Chocó are available as part of the Biodiversity—Reducing Emissions from Deforestation and forest Degradation (BioREDD) project.Open asset ↗BioREDDlines:344-425Code / dataset availability confirmedOpenAlex · Europe PMC · checked 10 Sept 2026
Recent advances in high throughput phenotyping have made it possible to collect large datasets following plant growth and development over time, and those in machine learning have made inferring phenotypic plant traits from such datasets possible. However, there remains a dirth of datasets following plant growth under stress conditions along with methods for inferring them using only remotely sensed data, especially under a combination of multiple stress factors such as drought, weeds and nutrient deficiency. Such stress factors and their combinations are commonly encountered during crop production and being able to accurately detect and treat such stress conditions in an automated and timely manner can provide a major boost to farm yields with minimal resource input. We present a generic framework for remote plant stress phenotyping that consists of a dataset with spatio-temporal-spectral data following sugarbeet crop growth under optimal, drought, low and surplus nitrogen fertilization, and weed stress conditions, along with a machine learning based methodology for systematically inferring these stress conditions from the remotely measured data. The dataset contains biweekly color images, infra-red stereo image pairs and hyperspectral camera images along with applied treatment parameters and environmental factors like temperature and humidity, collected over two months. We present a plant agnostic methodology for deriving plant trait indicators such as canopy cover, height, hyperspectral reflectance and vegetation indices along with a spectral 3D reconstruction of the plants from the raw data to serve as a benchmark. Additionally, we provide fresh and dry weight measurements for both the above (canopy) and below (beet) ground biomass at the end of the growing period to serve as indicators of expected yield. We further describe a data driven, machine learning based method to infer water, Nitrogen and weed stress using the derived plant trait indicators. We use the plant trait indicators to evaluate 8 different classification approaches from which the best classifier achieved a mean cross validation accuracy of $$\approx$$ 93, 76 and 83% for drought, nitrogen and weed stress severity classification respectively. We also show that our multi-modal approach significantly improves classifier performance over using any single modality. The presented framework and dataset can serve as a valuable reference for creating and comparing processing pipelines which extract plant trait indicators and infer prevalent stress factors from remote sensing data under a variety of environments and cropping conditions. These techniques can then be deployed on farm machinery or robots enabling automated, precise and timely corrective interventions for maximising yield.
Why it matches plant phenotyping methods植物ストレス表現型を推定するデータセット、マルチモーダル画像・分光計測、形質抽出、機械学習推定を一体化した汎用フレームワークであり、表現型取得・解析手法が研究の中心である。
abstractWe present a generic framework for remote plant stress phenotyping that consists of a dataset with spatio-temporal-spectral data
Reproduction assets foundThe paper releases its own plant stress phenotyping dataset (RGB, stereo IR, hyperspectral imagery, reference measurements) and accompanying pre-processing/classification software, both publicly available at author-provided URLs.Dataset · publicThe images and reference data that support the findings of this study are available from ETH Zürich ASL Datasets Repository, “ https://projects.asl.ethz.ch/datasets/doku.php?id=2018plantstressphenotyping ”.Open asset ↗ETH Zürich ASL Datasets Repository · 2018plantstressphenotypinglines:367-481Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Background The development of leaf area is one of the fundamental variables to quantify plant growth and physiological function and is therefore widely used to characterize genotypes and their interaction with the environment. To date, analysis of leaf area often requires elaborate and destructive measurements or imaging-based methods accompanied by automation that may result in costly solutions. Consequently in recent years there is an increasing trend towards simple and affordable sensor solutions and methodologies. A major focus is currently on harnessing the potential of applications developed for smartphones that provide access to analysis tools to a wide user basis. However, most existing applications entail significant manual effort during data acquisition and analysis. Results With the development of Plant Screen Mobile we provide a suitable smartphone solution for estimating digital proxies of leaf area and biomass in various imaging scenarios in the lab, greenhouse and in the field. To distinguish between plant tissue and background the core of the application comprises different classification approaches that can be parametrized by users delivering results on-the-fly. We demonstrate the practical applications of computing projected leaf area based on two case studies with Eragrostis and Musa plants. These studies showed highly significant correlations with destructive measurements of leaf area and biomass from both ground truth measurements and estimations from well-established screening systems. Conclusions We show that a smartphone together with our analysis tool Plant Screen Mobile is a suitable platform for rapid quantification of leaf and shoot development of various plant architectures. Beyond the estimation of projected leaf area the app can also be used to quantify color and shape parameters of other plant material including seeds and flowers.
Why it matches plant phenotyping methodsスマートフォン画像と分類アルゴリズムによる葉面積・バイオマス推定アプリを開発し、破壊測定および既存システムと検証しており、植物表現型取得が中心である。
abstractWith the development of Plant Screen Mobile we provide a suitable smartphone solution for estimating digital proxies of leaf area and biomass in various imaging scenarios in the lab, greenhouse and in the field.
Reproduction assets foundThe authors deposited the plant image data and corresponding ground truth measurements from the banana and Eragrostis case studies in the e!DAL research data publication system (DOI 10.25622/FZJ/2018/1), a paper-specific public asset. The project homepage (fz-juelich.de/ibg/ibg-2/psm) hosts the app and manual but is a Dataset · publichave no competing interests.
Availability of data and materials
The app is accompanied by a detailed manual and checkerboard images for calibration, which can also be downloaded from the project homepage. The datasets generated and/or analyzed during the current study are available in the e!DAL research data publication system, http://dx.doi.org/10.25622/FZJ/2018/1 [ 30 ].
Availability and requirements
Project name: Plant Screen Mobile. Project home page: https://fz-juelich.de/ibg/ibg-2/psm . Operating system(s): Android OS 4.0 (Ice Cream Sandwich) or higher. Programming language: Java. Other requirements: OpenCV manager (will be installed during Plant Screen Mobile setup). License: GNU GOpen asset ↗e!DAL research data publication system · 10.25622/FZJ/2018/1lines:127-198Code / dataset availability confirmedCrossref · OpenAlex · checked 15 Sept 2026
Core Ideas Subcanopy rovers enabled 3D characterization of thousands of hybrid maize plots. Machine learning produces heritable latent traits that describe plant architecture. Rover‐based phenotyping is far more efficient than manual phenotyping. Latent phenotypes from rovers are ready for application to plant biology and breeding. Collecting useful, interpretable, and biologically relevant phenotypes in a resource‐efficient manner is a bottleneck to plant breeding, genetic mapping, and genomic prediction. Autonomous and affordable subcanopy rovers are an efficient and scalable way to generate sensor‐based datasets of in‐field crop plants. Rovers equipped with lidar can produce three‐dimensional reconstructions of entire hybrid maize ( Zea mays L.) fields. In this study, we collected 2103 lidar scans of hybrid maize field plots and extracted phenotypic data from them by latent space phenotyping. We performed latent space phenotyping by two methods, principal component analysis and a convolutional autoencoder, to extract meaningful, quantitative latent space phenotypes (LSPs) describing whole‐plant architecture and biomass distribution. The LSPs had heritabilities of up to 0.44, similar to some manually measured traits, indicating that they can be selected on or genetically mapped. Manually measured traits can be successfully predicted by using LSPs as explanatory variables in partial least squares regression, indicating that the LSPs contain biologically relevant information about plant architecture. These techniques can be used to assess crop architecture at a reduced cost and in an automated fashion for breeding, research, or extension purposes, as well as to create or inform crop growth models.
Why it matches plant phenotyping methodsLiDAR搭載ローバーと潜在空間解析により、トウモロコシの全草型・バイオマス分布を定量化する手法が研究の中心である。
abstractSubcanopy rovers enabled 3D characterization of thousands of hybrid maize plots.
Reproduction assets foundThe paper's raw lidar point clouds are deposited at a public DOI, and the authors' analysis code plus phenotypic data (including the trained autoencoder HDF5 model) are available in a public Bitbucket repository. Both are paper-specific, public, and directly actionable.Dataset · publication about
plant architecture and plot-level biomass distribution. These tech-
niques will enable in-field high-throughput phenotyping of crops
in numerous locations and across developmental time by reducing
the cost of collecting high-quality phenotypic data points.
Data Availability
The raw lidar point clouds can be found at https://doi.org/10.25739/zxp6-g188. Code and phenotypic data are available at https://bitbucket.org/bucklerlab/p_lidar_lsp.Author Contributions
CS and GC, rover design and construction; JLG, ESB, and MAG, study
conceptualization; JLG, ER, NL, and NK, data collection; JLG, data
analysis; all authors contributed to manuscript preparation or review.
Conflicts of InOpen asset ↗10.25739/zxp6-g188pdf-raw-page:10 lines:1-78Dataset · public-
niques will enable in-field high-throughput phenotyping of crops
in numerous locations and across developmental time by reducing
the cost of collecting high-quality phenotypic data points.
Data Availability
The raw lidar point clouds can be found at https://doi.org/10.25739/zxp6-g188. Code and phenotypic data are available at https://bitbucket.org/bucklerlab/p_lidar_lsp.Author Contributions
CS and GC, rover design and construction; JLG, ESB, and MAG, study
conceptualization; JLG, ER, NL, and NK, data collection; JLG, data
analysis; all authors contributed to manuscript preparation or review.
Conflicts of Interest
Authors CS and GC are co-founders and the CEO and CTO, respec-
tively, of EarOpen asset ↗bucklerlab/p_lidar_lsppdf-raw-page:10 lines:1-78Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Accurate quantification of below-ground biomass (BGB) of woody vegetation is critical to understanding ecosystem function and potential for climate change mitigation from sequestration of biomass carbon. We compiled 2054 measurements of planted and natural individual tree and shrub biomass from across different regions of Australia (arid shrublands to tropical rainforests) to develop allometric models for prediction of BGB. We found that the relationship between BGB and stem diameter was generic, with a simple power-law model having a BGB prediction efficiency of 72–93% for four broad plant functional types: (i) shrubs and Acacia trees, (ii) multi-stemmed mallee eucalypts, (iii) other trees of relatively high wood density, and; (iv) a species of relatively low wood density, Pinus radiata D. Don. There was little improvement in accuracy of model prediction by including variables (e.g. climatic characteristics, stand age or management) in addition to stem diameter alone. We further assessed the generality of the plant functional type models across 11 contrasting stands where data from whole-plot excavation of BGB were available. The efficiency of model prediction of stand-based BGB was 93%, with a mean absolute prediction error of only 6.5%, and with no improvements in validation results when species-specific models were applied. Given the high prediction performance of the generalised models, we suggest that additional costs associated with the development of new species-specific models for estimating BGB are only warranted when gains in accuracy of stand-based predictions are justifiable, such as for a high-biomass stand comprising only one or two dominant species. However, generic models based on plant functional type should not be applied where stands are dominated by species that are unusual in their morphology and unlikely to conform to the generalised plant functional group models.
Why it matches plant phenotyping methods植物の地下部バイオマスという明示的な形質を推定する汎用アロメトリーモデルを開発し、複数の機能型・林分で予測性能を検証しており、形質測定法が研究の中心です。
abstractWe compiled 2054 measurements of planted and natural individual tree and shrub biomass from across different regions of Australia (arid shrublands to tropical rainforests) to develop allometric models for prediction of BGB.
Reproduction assets foundThe paper's below-ground biomass allometry is built from the authors' Australian Individual Tree Biomass Library (Paul et al. 2017b), a public dataset deposited with a DOI and ÆKOS portal URL, which qualifies as a paper-specific public phenotype dataset. The ecoregions map and Dryad wood density database are generic/cdDataset · publicH, England JR, Davies MJ, Luck H (2017a) Measurements of stem diameter:
786 implications for individual- and stand-level errors. Environmental Monitoring and Assessment, 189, 416, 1-
787 14.
788 Paul KI, Larmour, J., Zerihun, A., et al. (2017b) Australian Individual Tree Biomass Library, Version 3.
789 10.4227/05/566629ADA95DA. http://www.aekos.org.au/dataset/223706. Obtained from Australian
790 Ecological Knowledge and Observation System Data Portal (ÆKOS, http://www.portal. aekos.org.au/), ,
Generic allometrics 38Open asset ↗aekos.org.au · 10.4227/05/566629ADA95DApdf-layout-page:38 lines:1-43Code / dataset availability confirmedEurope PMC · checked 10 Sept 2026
In order to make effective decisions on sustainable development, it is essential for sugarcane-producing countries to take into account sugarcane acreage and sugarcane production dynamics. The availability of sugarcane biophysical data along the growth season is key to an effective mapping of such dynamics, especially to tune agronomic models and to cross-validate indirect satellite measurements. Here, we introduce a dataset comprising 3,500 sugarcane observations collected from October 2014 until October 2015 at four fields in the São Paulo state (Brazil). The campaign included both non-destructive measurements of plant biometrics and destructive biomass weighing procedures. The acquisition plan was designed to maximize cost-effectiveness and minimize field-invasiveness, hence the non-destructive measurements outnumber the destructive ones. To compensate for such imbalance, a method to convert the measured biometrics into biomass estimates, based on the empirical adjustment of allometric models, is proposed. In addition, the paper addresses the precisions associated to the ground measurements and derived metrics. The presented growth dynamics and associated precisions can be adopted when designing new sugarcane measurement campaigns.
Why it matches plant phenotyping methodsサトウキビのバイオメトリクスからバイオマスを推定する手法を提案し、地上測定データセットと測定精度も提示しており、植物形質の取得・推定が中心である。
abstractHere, we introduce a dataset comprising 3,500 sugarcane observations collected from October 2014 until October 2015 at four fields in the São Paulo state (Brazil).
Reproduction assets foundThe paper's ground reference sugarcane dataset (3,500 observations of biometrics, LAI, and biomass from four fields in São Paulo state) is published openly on the 4TU Centre for Research Data repository. The authors' MATLAB analysis scripts are only available upon request, so they do not qualify as public assets.Dataset · publicThe ground measurements, published for public use, can be found on the 4TU Centre for Research Data
repository, see (Data Citation 1).Open asset ↗4TU Centre for Research Datapdf-page:11 lines:1-40Code / dataset availability confirmedOpenAlex · Europe PMC · checked 10 Sept 2026
The model species Arabidopsis thaliana has extensive resources to investigate intraspecific trait variability and the genetic bases of ecologically relevant traits. However, the cost of equipment and software required for high-throughput phenotyping is often a bottleneck for large-scale studies, such as mutant screening or quantitative genetics analyses. Simple tools are needed for the measurement of fitness-related traits, like relative growth rate and fruit production, without investment in expensive infrastructures. Here, we describe methods that enable the estimation of biomass accumulation and fruit number from the analysis of rosette and inflorescence images taken with a regular camera. We developed two models to predict plant dry mass and fruit number from the parameters extracted with the analysis of rosette and inflorescence images. Predictive models were trained by sacrificing growing individuals for dry mass estimation, and manually measuring a fraction of individuals for fruit number at maturity. Using a cross-validation approach, we showed that quantitative parameters extracted from image analysis predicts more 90% of both plant dry mass and fruit number. When used on 451 natural accessions, the method allowed modeling growth dynamics, including relative growth rate, throughout the life cycle of various ecotypes. Estimated growth-related traits had high heritability (0.65 < H 2 < 0.93), as well as estimated fruit number ( H 2 = 0.68). In addition, we validated the method for estimating fruit number with rev5 , a mutant with increased flower abortion. The method we propose here is an application of automated computerization of plant images with ImageJ, and subsequent statistical modeling in R. It allows plant biologists to measure growth dynamics and fruit number in hundreds of individuals with simple computing steps that can be repeated and adjusted to a wide range of laboratory conditions. It is thus a flexible toolkit for the measurement of fitness-related traits in large populations of a model species.
Why it matches plant phenotyping methods画像から植物乾物重・果実数・成長動態を推定する手法を開発し、交差検証と変異体で検証しており、表現型取得・推定法が研究の中心である。
abstractHere, we describe methods that enable the estimation of biomass accumulation and fruit number from the analysis of rosette and inflorescence images taken with a regular camera.
Reproduction assets foundThe paper's availability statement explicitly links authors' code on GitHub and the phenotypic dataset on Dryad; supplementary files also contain the ImageJ macros and R code used for the phenotyping analysis.Code · publicCodes are available on Github ( https://github.com/fvasseur ), and phenotypic data are available on the Dryad repository ( https://doi.org/10.5061/dryad.343bd84 ) [ 43 ].Open asset ↗github.com/fvasseurlines:312-394Dataset · publicphenotypic data are available on the Dryad repository ( https://doi.org/10.5061/dryad.343bd84 ) [ 43 ].Open asset ↗Dryad · 10.5061/dryad.343bd84lines:312-394Code / dataset availability confirmedOpenAlex · Europe PMC · checked 10 Sept 2026
Conventional field phenotyping for drought tolerance, the most important factor limiting yield at a global scale, is labor-intensive and time-consuming. Automated greenhouse platforms can increase the precision and throughput of plant phenotyping and contribute to a faster release of drought tolerant varieties. The aim of this work was to establish a framework of analysis to identify early traits which could be efficiently measured in a greenhouse automated phenotyping platform, for predicting the drought tolerance of field grown soybean genotypes. A group of genotypes was evaluated, which showed variation in their drought susceptibility index (DSI) for final biomass and leaf area. A large number of traits were measured before and after the onset of a water deficit treatment, which were analyzed under several criteria: the significance of the regression with the DSI, phenotyping cost, earliness, and repeatability. The most efficient trait was found to be transpiration efficiency measured at 13 days after emergence. This trait was further tested in a second experiment with different water deficit intensities, and validated using a different set of genotypes against field data from a trial network in a third experiment. The framework applied in this work for assessing traits under different criteria could be helpful for selecting those most efficient for automated phenotyping.
Why it matches plant phenotyping methods温室自動フェノタイピング platformで測定する早期形質を選定・評価し、異なる実験と圃場データで検証しており、形質取得と評価フレームワークが研究の中心である。
abstractThe aim of this work was to establish a framework of analysis to identify early traits which could be efficiently measured in a greenhouse automated phenotyping platform
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 1
Phenotypic traits evaluated during the Experiment 1 with GlyPh and four criteria considered for the evaluation of phenotyping efficiency.Open asset ↗lines:584-646Code / dataset availability confirmedEurope PMC · OpenAlex · checked 10 Sept 2026
Non-destructive plant growth measurement is essential for plant growth and health research. As a 3D sensor, Kinect v2 has huge potentials in agriculture applications, benefited from its low price and strong robustness. The paper proposes a Kinect-based automatic system for non-destructive growth measurement of leafy vegetables. The system used a turntable to acquire multi-view point clouds of the measured plant. Then a series of suitable algorithms were applied to obtain a fine 3D reconstruction for the plant, while measuring the key growth parameters including relative/absolute height, total/projected leaf area and volume. In experiment, 63 pots of lettuce in different growth stages were measured. The result shows that the Kinect-measured height and projected area have fine linear relationship with reference measurements. While the measured total area and volume both follow power law distributions with reference data. All these data have shown good fitting goodness ( R ² = 0.9457-0.9914). In the study of biomass correlations, the Kinect-measured volume was found to have a good power law relationship ( R ² = 0.9281) with fresh weight. In addition, the system practicality was validated by performance and robustness analysis.
Why it matches plant phenotyping methodsKinectによる多視点3D再構成とアルゴリズムを用いて、植物の高さ・葉面積・体積・バイオマス関連形質を自動測定し、精度と頑健性も検証しているため、植物フェノタイピング手法が中心である。
abstractThe paper proposes a Kinect-based automatic system for non-destructive growth measurement of leafy vegetables.
Reproduction assets foundThe paper's Supplementary Materials, available at the MDPI s1 URL, explicitly contain the paper-specific phenotyping assets: point clouds and meshes shown in figures, the datasets used for the scatter plots of Kinect-measured growth parameters vs. reference measurements, and interactive MATLAB 3D scatter plots. No codeDataset · publicThe following are available online at http://www.mdpi.com/1424-8220/18/3/806/s1 . Supplementary data associated with this article have been provided. These data include the point clouds and meshes appeared in figures, the data sets used by scatter plots, and interactive MATLAB 3D scatter plots.Open asset ↗lines:114-135Code / dataset availability confirmedEurope PMC · OpenAlex · checked 10 Sept 2026
Contemporary terrestrial laser scanning (TLS) is being used widely in forest ecology applications to examine ecosystem properties at increasing spatial and temporal scales. Harvard Forest (HF) in Petersham, MA, USA, is a long-term ecological research (LTER) site, a National Ecological Observatory Network (NEON) location and contains a 35 ha plot which is part of Smithsonian Institution's Forest Global Earth Observatory (ForestGEO). The combination of long-term field plots, eddy flux towers and the detailed past historical records has made HF very appealing for a variety of remote sensing studies. Terrestrial laser scanners, including three pioneering research instruments: the Echidna Validation Instrument, the Dual-Wavelength Echidna Lidar and the Compact Biomass Lidar, have already been used both independently and in conjunction with airborne laser scanning data and forest census data to characterize forest dynamics. TLS approaches include three-dimensional reconstructions of a plot over time, establishing the impact of ice storm damage on forest canopy structure, and characterizing eastern hemlock ( Tsuga canadensis ) canopy health affected by an invasive insect, the hemlock woolly adelgid ( Adelges tsugae ). Efforts such as those deployed at HF are demonstrating the power of TLS as a tool for monitoring ecological dynamics, identifying emerging forest health issues, measuring forest biomass and capturing ecological data relevant to other disciplines. This paper highlights various aspects of the ForestGEO plot that are important to current TLS work, the potential for exchange between forest ecology and TLS, and emphasizes the strength of combining TLS data with long-term ecological field data to create emerging opportunities for scientific study.
Why it matches plant phenotyping methodsTLSを用いた森林キャノピー構造、健康状態、バイオマスの測定・監視を中心に扱うレビューであり、植物状態の取得手法が主要テーマです。
abstractTerrestrial laser scanners, including three pioneering research instruments: the Echidna Validation Instrument, the Dual-Wavelength Echidna Lidar and the Compact Biomass Lidar, have already been used both independently and in conjunction with airborne laser scanning data and forest census data to characterize forest dynamics.
Reproduction assets foundThe paper's TLS work is grounded in the Harvard Forest ForestGEO plot census data (HF253), which the authors explicitly make available in the Data accessibility statement via the Harvard Forest Data Archive. This is a paper-specific, publicly accessible field/phenotype dataset (stem surveys, DBH, mortality assessments)Dataset · publicAdditional data are available from: http://harvardforest.fas.harvard.edu:8080/exist/apps/datasets/showData.html?id=hf253 .Open asset ↗hf253lines:111-224Code / dataset availability confirmedEurope PMC · OpenAlex · checked 10 Sept 2026
Background Maize (Zea mays ssp. mays) is 1 of 3 crops, along with rice and wheat, responsible for more than one-half of all calories consumed around the world. Increasing the yield and stress tolerance of these crops is essential to meet the growing need for food. The cost and speed of plant phenotyping are currently the largest constraints on plant breeding efforts. Datasets linking new types of high-throughput phenotyping data collected from plants to the performance of the same genotypes under agronomic conditions across a wide range of environments are essential for developing new statistical approaches and computer vision-based tools. Findings A set of maize inbreds-primarily recently off patent lines-were phenotyped using a high-throughput platform at University of Nebraska-Lincoln. These lines have been previously subjected to high-density genotyping and scored for a core set of 13 phenotypes in field trials across 13 North American states in 2 years by the Genomes 2 Fields Consortium. A total of 485 GB of image data including RGB, hyperspectral, fluorescence, and thermal infrared photos has been released. Conclusions Correlations between image-based measurements and manual measurements demonstrated the feasibility of quantifying variation in plant architecture using image data. However, naive approaches to measuring traits such as biomass can introduce nonrandom measurement errors confounded with genotype variation. Analysis of hyperspectral image data demonstrated unique signatures from stem tissue. Integrating heritable phenotypes from high-throughput phenotyping data with field data from different environments can reveal previously unknown factors that influence yield plasticity.
Why it matches plant phenotyping methods高スループット画像データセットの公開と、画像測定を手動測定と比較検証することが中心であり、植物形態形質の抽出・評価に直接関係するため。
abstractA total of 485 GB of image data including RGB, hyperspectral, fluorescence, and thermal infrared photos has been released.
Reproduction assets foundThe paper's phenotyping image dataset (RGB, hyperspectral, fluorescence, thermal) is publicly deposited at GigaScience Database (doi 10.5524/100371); a subset of RGB images is also available at plantvision.unl.edu/dataset; the authors' validation/analysis source code is publicly posted on GitHub (Maize_Phenotype_Map).Dataset · publicA subset of the RGB images within this dataset were previously analyzed in Choudhury et al. [ 18 ], and were made available for download from http://plantvision.unl.edu/dataset under the terms of the Toronto Agreement.Open asset ↗lines:399-408Code / dataset availability confirmedCrossref · OpenAlex · Europe PMC · checked 10 Sept 2026
Abstract Background Image-based high-throughput phenotyping technologies have been rapidly developed in plant science recently, and they provide a great potential to gain more valuable information than traditionally destructive methods. Predicting plant biomass is regarded as a key purpose for plant breeders and ecologists. However, it is a great challenge to find a predictive biomass model across experiments. Results In the present study, we constructed 4 predictive models to examine the quantitative relationship between image-based features and plant biomass accumulation. Our methodology has been applied to 3 consecutive barley (Hordeum vulgare) experiments with control and stress treatments. The results proved that plant biomass can be accurately predicted from image-based parameters using a random forest model. The high prediction accuracy based on this model will contribute to relieving the phenotyping bottleneck in biomass measurement in breeding applications. The prediction performance is still relatively high across experiments under similar conditions. The relative contribution of individual features for predicting biomass was further quantified, revealing new insights into the phenotypic determinants of the plant biomass outcome. Furthermore, methods could also be used to determine the most important image-based features related to plant biomass accumulation, which would be promising for subsequent genetic mapping to uncover the genetic basis of biomass. Conclusions We have developed quantitative models to accurately predict plant biomass accumulation from image data. We anticipate that the analysis results will be useful to advance our views of the phenotypic determinants of plant biomass outcome, and the statistical methods can be broadly used for other plant species.
Why it matches plant phenotyping methods画像由来特徴量から植物バイオマスを推定する予測モデルを開発し、複数実験で性能評価しており、表現型取得・推定手法が研究の中心である。
abstractwe constructed 4 predictive models to examine the quantitative relationship between image-based features and plant biomass accumulation.
Reproduction assets foundThe paper's authors publicly deposited their analysis code (HTPmod R package on GitHub), raw image datasets in the IPK PGP repository under three DOIs, and supporting data (metadata, raw images, archival code copy) in the GigaScience GigaDB repository. All are paper-specific, public, and actionable.Dataset · publicThe raw image datasets, as well as analyzed data supporting the results of this article, are available in the PGP repository [ 44 ] under https://dx.doi.org/10.5447/IPK/2017/24 , https://dx.doi.org/10.5447/IPK/2017/25 , and https://dx.doi.org/10.5447/IPK/2017/26Open asset ↗PGP repository · 10.5447/IPK/2017/24lines:102-163Dataset · publicThe raw image datasets, as well as analyzed data supporting the results of this article, are available in the PGP repository [ 44 ] under https://dx.doi.org/10.5447/IPK/2017/24 , https://dx.doi.org/10.5447/IPK/2017/25 , and https://dx.doi.org/10.5447/IPK/2017/26Open asset ↗PGP repository · 10.5447/IPK/2017/25lines:102-163Dataset · publicThe raw image datasets, as well as analyzed data supporting the results of this article, are available in the PGP repository [ 44 ] under https://dx.doi.org/10.5447/IPK/2017/24 , https://dx.doi.org/10.5447/IPK/2017/25 , and https://dx.doi.org/10.5447/IPK/2017/26Open asset ↗PGP repository · 10.5447/IPK/2017/26lines:102-163Dataset · publicSupporting data, including metadata tables, raw image files, and an archival copy of HTPmod are also available via the GigaScience repository, Giga DB [ 46 ].Open asset ↗lines:102-163Code / dataset availability confirmedEurope PMC · OpenAlex · checked 10 Sept 2026
Sorghum ( Sorghum bicolor (L.) Moench) is a rapidly growing, high-biomass crop prized for abiotic stress tolerance. However, measuring genotype-by-environment (G x E) interactions remains a progress bottleneck. We subjected a panel of 30 genetically diverse sorghum genotypes to a spectrum of nitrogen deprivation and measured responses using high-throughput phenotyping technology followed by ionomic profiling. Responses were quantified using shape (16 measurable outputs), color (hue and intensity), and ionome (18 elements). We measured the speed at which specific genotypes respond to environmental conditions, in terms of both biomass and color changes, and identified individual genotypes that perform most favorably. With this analysis, we present a novel approach to quantifying color-based stress indicators over time. Additionally, ionomic profiling was conducted as an independent, low-cost, and high-throughput option for characterizing G x E, identifying the elements most affected by either genotype or treatment and suggesting signaling that occurs in response to the environment. This entire dataset and associated scripts are made available through an open-access, user-friendly, web-based interface. In summary, this work provides analysis tools for visualizing and quantifying plant abiotic stress responses over time. These methods can be deployed as a time-efficient method of dissecting the genetic mechanisms used by sorghum to respond to the environment to accelerate crop improvement.
Why it matches plant phenotyping methods植物の形状・色・バイオマス変化を高スループットに定量化し、時間経過に伴うストレス応答解析ツールと公開データセットを提示しており、表現型取得・解析が研究の中心である。
abstractmeasured responses using high-throughput phenotyping technology
Reproduction assets foundThe authors explicitly state that the raw phenotyping data (approximately 90,000 images' worth of shape/color measurements) and the analysis scripts used to generate the manuscript figures are publicly available through the PlantCV Danforth Center sorghum abiotic stress dataset page. This is a paper-specific, publicly,Dataset · publicScripts used to make the figures within this manuscript, along with the raw data, are available here: http://plantcv.danforthcenter.org/pages/data-sets/sorghum_abiotic_stress.htmlOpen asset ↗plantcv.danforthcenter.orglines:130-134Code / dataset availability confirmedCrossref · Europe PMC · OpenAlex · checked 14 Sept 2026
Abstract Biomass is an important phenotypic trait in functional ecology and growth analysis. The typical methods for measuring biomass are destructive, and they require numerous individuals to be cultivated for repeated measurements. With the advent of image-based high-throughput plant phenotyping facilities, non-destructive biomass measuring methods have attempted to overcome this problem. Thus, the estimation of plant biomass of individual plants from their digital images is becoming more important. In this paper, we propose an approach to biomass estimation based on image derived phenotypic traits. Several image-based biomass studies state that the estimation of plant biomass is only a linear function of the projected plant area in images. However, we modeled the plant volume as a function of plant area, plant compactness, and plant age to generalize the linear biomass model. The obtained results confirm the proposed model and can explain most of the observed variance during image-derived biomass estimation. Moreover, a small difference was observed between actual and estimated digital biomass, which indicates that our proposed approach can be used to estimate digital biomass accurately.
Why it matches plant phenotyping methods画像由来の形質から非破壊的に植物バイオマスを推定する計算手法を開発・検証しており、フェノタイピング手法が研究の中心である。
abstractwe propose an approach to biomass estimation based on image derived phenotypic traits.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicWe analyzed a barley image dataset downloaded from http://iapg2p.sourceforge.net/modeling/#dataset . The Leibniz Institute of Plant Genetics and Crop Plant Research (IPK), Gatersleben, Germany generated this high-throughput phenotype data setOpen asset ↗iapg2p.sourceforge.netlines:38-78Code / dataset availability confirmedbioRxiv · Europe PMC · OpenAlex · checked 10 Sept 2026
Maize (Zea mays ssp. mays) is one of three crops, along with rice and wheat, responsible for more than 1/2 of all calories consumed around the world. Increasing the yield and stress tolerance of these crops is essential to meet the growing need for food. The cost and speed of plant phenotyping is currently the largest constraint on plant breeding efforts. Datasets linking new types of high throughput phenotyping data collected from plants to the performance of the same genotypes under agronomic conditions across a wide range of environments are essential for developing new statistical approaches and computer vision based tools. A set of maize inbreds - primarily recently off patent lines - were phenotyped using a high throughput platform at University of Nebraska-Lincoln. These lines have been previously subjected to high density genotyping, and scored for a core set of 13 phenotypes in field trials across 13 North American states in two years by the Genomes to Fields consortium. A total of 485 GB of image data including RGB, hyperspectral, fluorescence and thermal infrared photos has been released. Correlations between image-based measurements and manual measurements demonstrated the feasibility of quantifying variation in plant architecture using image data. However, naive approaches to measuring traits such as biomass can introduce nonrandom measurement errors confounded with genotype variation. Analysis of hyperspectral image data demonstrated unique signatures from stem tissue. Integrating heritable phenotypes from high-throughput phenotyping data with field data from different environments can reveal previously unknown factors influencing yield plasticity.
Why it matches plant phenotyping methods高速画像・ハイパースペクトル等を用いた植物表現型データセットの構築と、画像測定値を手動測定と比較する技術的検証が中心であるため、収載する。
abstractA total of 485 GB of image data including RGB, hyperspectral, fluorescence and thermal infrared photos has been released.
Reproduction assets foundThe paper releases ~485 GB of maize phenotyping image data (RGB, hyperspectral, fluorescence, thermal) publicly at plantvision.unl.edu/dataset, and the authors' validation/analysis source code is posted on GitHub (https://github.com/shanwai1234/Maize Phenotype Map). Both are paper-specific, public, and actionable.Dataset · publicA subset of the RGB images within
this dataset were previously analyzed in18 , and were made available for download from http://plantvision.unl.edu/dataset under
the terms of the Toronto Agreement.Open asset ↗pdf-page:6 lines:1-51Code · publicSource codes for all validation analysis are posted online (https://github.com/shanwai1234/Maize Phenotype Map).Open asset ↗shanwai1234/Maizepdf-page:6 lines:1-51Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
HIGHLIGHTS Biomass production and cell wall composition are differentially impacted by harvesting year and genotypes, influencing then cellulose conversion in miniaturized assay.Using a high-throughput miniaturized and semi-automated method for performing the pretreatment and saccharification steps at laboratory scale allows for the assessment of these factors on the biomass potential for producing bioethanol before moving to the industrial scale. The large genetic diversity of the perennial grass miscanthus makes it suitable for producing cellulosic ethanol in biorefineries. The saccharification potential and year variability of five genotypes belonging to Miscanthus × giganteus and Miscanthus sinensis were explored using a miniaturized and semi-automated method, allowing the application of a hot water treatment followed by an enzymatic hydrolysis. The studied genotypes highlighted distinct cellulose conversion yields due to their distinct cell wall compositions. An inter-year comparison revealed significant variations in the biomass productivity and cell wall compositions. Compared to the recalcitrant genotypes, more digestible genotypes contained higher amounts of hemicellulosic carbohydrates and lower amounts of cellulose and lignin. In contrast to hemicellulosic carbohydrates, the relationships analysis between the biomass traits and cellulose conversion clearly showed the same negative effect of cellulose and lignin on cellulose digestion. The miniaturized and semi-automated method we developed was usable at the laboratory scale and was reliable for mimicking the saccharification at the pilot scale using a steam explosion pretreatment and enzymatic hydrolysis. Therefore, this miniaturized method will allow the reliable screening of many genotypes for saccharification potential. These findings provide valuable information and tools for breeders to create genotypes combining high yield, suitable biomass composition, and high saccharification yields.
Why it matches plant phenotyping methodsミスカンサスの遺伝型を対象に、バイオマスの糖化能を測定する小型・半自動・高スループット法を開発し、パイロットスケールとの再現性も検証しているため、植物形質評価法が中心である。
abstractUsing a high-throughput miniaturized and semi-automated method for performing the pretreatment and saccharification steps at laboratory scale allows for the assessment of these factors on the biomass potential for producing bioethanol before moving to the industrial scale.
ABSTRACT Sorghum ( Sorghum bicolor (L.) Moench) is a rapidly growing, high-biomass crop prized for abiotic stress tolerance. However, measuring genotype-by-environment (G × E) interactions remains a progress bottleneck. Here we describe strategies for identifying shape, color and ionomic indicators of plant nitrogen use efficiency. We subjected a panel of 30 genetically diverse sorghum genotypes to a spectrum of nitrogen deprivation and measured responses using high-throughput phenotyping technology followed by ionomic profiling. Responses were quantified using shape (16 measurable outputs), color (hue and intensity) and ionome (18 elements). We measured the speed at which specific genotypes respond to environmental conditions, both in terms of biomass and color changes, and identified individual genotypes that perform most favorably. With this analysis we present a novel approach to quantifying color-based stress indicators over time. Additionally, ionomic profiling was conducted as an independent, low cost and high throughput option for characterizing G × E, identifying the elements most affected by either genotype or treatment and suggesting signaling that occurs in response to the environment. This entire dataset and associated scripts are made available through an open access, user-friendly, web-based interface. In summary, this work provides analysis tools for visualizing and quantifying plant abiotic stress responses over time. These methods can be deployed as a time-efficient method of dissecting the genetic mechanisms used by sorghum to respond to the environment to accelerate crop improvement.
Why it matches plant phenotyping methods高スループット画像計測による形状・色・バイオマス応答の定量化と、経時的なストレス指標の解析手法が研究の中心であり、データセットと解析スクリプトも提供している。
abstractmeasured responses using high-throughput phenotyping technology followed by ionomic profiling
Reproduction assets foundThe authors publicly release the raw phenotyping data and figure-generating analysis scripts for this sorghum nitrogen-stress study via the PlantCV Danforth Center data-sets page, which is an allowed URL.Dataset · public29 concentrations in the two lower nitrogen treatment groups significantly affects shape but
130 not color. To further explore the effect that our experimental treatments had on the
131 measured shape characteristics and color for each individual genotype, an interactive
132 version of the generated data is available here:
133 (http://plantcv.danforthcenter.org/pages/data-sets/sorghum_abiotic_stress.html).
134 Many factors contribute to the ability of plants to utilize nutrients and presumably,
135 much of this is genetically explained. Correspondingly, genotype was a highly significant
136 variable (p-value = 0.003 when measuring area) within this dataset. To investigate how
137 much nitrogOpen asset ↗pdf-layout-page:5 lines:1-40Code / dataset availability confirmedEurope PMC · OpenAlex · checked 10 Sept 2026
To ensure food security in the face of population growth, decreasing water and land for agriculture, and increasing climate variability, crop yields must increase faster than the current rates. Increased yields will require implementing novel approaches in genetic discovery and breeding. Here we demonstrate the potential of field-based high throughput phenotyping (HTP) on a large recombinant population of rice to identify genetic variation underlying important traits. We find that detecting quantitative trait loci (QTL) with HTP phenotyping is as accurate and effective as traditional labor-intensive measures of flowering time, height, biomass, grain yield, and harvest index. Genetic mapping in this population, derived from a cross of an modern cultivar (IR64) with a landrace (Aswina), identified four alleles with negative effect on grain yield that are fixed in IR64, demonstrating the potential for HTP of large populations as a strategy for the second green revolution.
Why it matches plant phenotyping methods圃場ハイスループット表現型解析を大規模イネ集団に適用し、従来測定との精度・有効性を比較してQTL検出に利用しており、表現型取得法が研究の中心である。
abstractHere we demonstrate the potential of field-based high throughput phenotyping (HTP) on a large recombinant population of rice to identify genetic variation underlying important traits.
Reproduction assets foundThe paper's QTL/phenotyping analysis code is publicly hosted on Bitbucket, and the authors state that the code and original phenotyping data files are deposited in Dryad under a DOI. Both are paper-specific, public, and actionable.Code · publicR code is currently hosted at bitbucket.org ( https://bitbucket.org/paultanger/rilpopr ) and code as well as original data files will be deposited into http://dx.doi.org/10.5061/dryad.53bj8 and www.datadryad.org for publication and availability.Open asset ↗bitbucket.org/paultanger/rilpoprlines:62-105Dataset · publicR code is currently hosted at bitbucket.org ( https://bitbucket.org/paultanger/rilpopr ) and code as well as original data files will be deposited into http://dx.doi.org/10.5061/dryad.53bj8 and www.datadryad.org for publication and availability.Open asset ↗Dryad · 10.5061/dryad.53bj8lines:62-105Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
As integral parts of plant signaling networks, phytohormones are involved in the regulation of plant metabolism and growth under adverse environmental conditions, including salinity. Globally, salinity is one of the most severe abiotic stressors with an estimated 800 million hectares of arable land affected. Roots are the first plant organ to sense salinity in the soil, and are the initial site of sodium (Na + ) exposure. However, the quantification of phytohormones in roots is challenging, as they are often present at extremely low levels compared to other plant tissues. To overcome this challenge, we developed a high-throughput LC-MS method to quantify ten endogenous phytohormones and their metabolites of diverse chemical classes in roots of barley. This method was validated in a salinity stress experiment with six barley varieties grown hydroponically with and without salinity. In addition to phytohormones, we quantified 52 polar primary metabolites, including some phytohormone precursors, using established GC-MS and LC-MS methods. Phytohormone and metabolite data were correlated with physiological measurements including biomass, plant size and chlorophyll content. Root and leaf elemental analysis was performed to determine Na + exclusion and K + retention ability in the studied barley varieties. We identified distinct phytohormone and metabolite signatures as a response to salinity stress in different barley varieties. Abscisic acid increased in the roots of all varieties under salinity stress, and elevated root salicylic acid levels were associated with an increase in leaf chlorophyll content. Furthermore, the landrace Sahara maintained better growth, had lower Na + levels and maintained high levels of the salinity stress linked metabolite putrescine as well as the phytohormone metabolite cinnamic acid, which has been shown to increase putrescine concentrations in previous studies. This study highlights the importance of root phytohormones under salinity stress and the multi-variety analysis provides an important update to analytical methodology, and adds to the current knowledge of salinity stress responses in plants at the molecular level.
Why it matches plant phenotyping methods根の植物ホルモンを定量するLC-MS法の開発と検証が中心で、塩ストレス状態に関連する植物表現型・生理状態の抽出法として扱われているため。
abstractwe developed a high-throughput LC-MS method to quantify ten endogenous phytohormones and their metabolites of diverse chemical classes in roots of barley.
Reproduction assets foundThe article reports LC-MS/GC-MS phytohormone and metabolite quantification plus physiological measurements (biomass, lengths, chlorophyll, Na+/K+) for six barley varieties under salinity stress. No author analysis code, models, or image/sensor datasets are described. The only paper-specific public asset is the article'Supplement · publicr providing barley seeds and advice. We also want to thank Mrs. Nirupama Jayasinghe, Mrs. Natalie Pereira, and Mrs. Himasha Mendis (Metabolomics Australia) for primary metabolite quantification and analysis.
1
http://www.metaboanalyst.ca/
Supplementary Material
The Supplementary Material for this article can be found online at: http://journal.frontiersin.org/article/10.3389/fpls.2016.02070/full#supplementary-material
Click here for additional data file.
Click here for additional data file.
Click here for additional data file.
References
Achard P. Cheng H. De Grauwe L. Decat J. Schoutteten H. Moritz T.
( 2006 ).
Integration of plant responses to environmentally activated phytohormonal signalsOpen asset ↗lines:623-682