While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially resolved physiological measurements that go beyond passive imaging. By tightly coupling perception, geometric reasoning, and manipulation, the proposed system provides a robotics-driven approach to high-resolution plant phenotyping and opens new directions for autonomous agricultural inspection and plant-aware manipulation.
Why it matches plant phenotyping methods植物葉の蛍光を自律ロボットで空間的・反復的に取得するプラットフォームを開発しており、植物表現型の取得手法が研究の中心です。
abstractWe present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves.
Reproduction assets foundThe paper states its code is publicly available in the authors' SonyCSLParis GitHub repository (Plant3DImager), which implements the phenotyping perception and motion-planning pipeline. The exact full URL is split across a line break in the supplied text, so the verifiable allowed URL prefix is used.Code · public2 The code is available at https://github.com/SonyCSLParis/ 3 See for example at https://www.youtube.com/watch?v=Open asset ↗SonyCSLParis/pdf-page:4 lines:1-61Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Abstract Plants employ non-photochemical quenching (NPQ) to protect their photosynthetic apparatus from photodamage. The response latency of NPQ following changes in light intensity is thought to significantly decrease photosynthetic efficiency. The amount of NPQ is commonly quantified from chlorophyll-fluorescence techniques using the Stern–Volmer equation, which requires fully closed reaction centres (RCs) of photosystem II, yielding NPQ in the absence of photochemical quenching ( $${\rm{NPQ}}^{\rm{Closed}}$$ NPQ Closed ). However, in nature, NPQ and photochemical quenching are normally present simultaneously. Therefore, to obtain a full understanding of this process, NPQ should also be explored when the RCs are open. Here we developed two methodologies to obtain NPQ in the presence of photochemistry ( $${\rm{NPQ}}^{\rm{Open}}$$ NPQ Open ) using both fluorescence lifetime and fluorescence yield measurements. A detailed comparison in Arabidopsis thaliana plants reveals that the value of $${\mathrm{NPQ}}^{\mathrm{Open}}$$ NPQ Open is ~35% lower than that of $${\rm{NPQ}}^{\rm{Closed}}$$ NPQ Closed . This difference is consistently observed across all measurements and is seen both upon closing ( $${\rm{NPQ}}^{\rm{Open}}\to {\rm{NPQ}}^{\rm{Closed}}$$ NPQ Open → NPQ Closed ) and upon reopening ( $${\mathrm{NPQ}}^{\mathrm{Closed}}\to {\mathrm{NPQ}}^{\mathrm{Open}}$$ NPQ Closed → NPQ Open ) of the RCs. We show that this difference can be explained by the presence of RC-induced ‘instantaneous’ switching of the NPQ quenching rate. This means that, in plants, NPQ is much more economical than is widely believed, it is large when its presence is needed, and it decreases instantaneously when the need disappears.
Why it matches plant phenotyping methods植物の光合成状態（NPQ）を測定するための蛍光寿命・蛍光収率に基づく2つの方法を開発し、比較検証しているため、方法開発が中心である。
abstractHere we developed two methodologies to obtain NPQ in the presence of photochemistry ( $${\rm{NPQ}}^{\rm{Open}}$$ NPQ Open ) using both fluorescence lifetime and fluorescence yield measurements.
Reproduction assets foundThe paper's custom ultrafast fluorescence analysis code (ICA-based PSII/PSI deconvolution and NPQ calculations) is explicitly deposited by the authors on GitHub, alongside the original data contributions.Code · publicr(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Funding
This work was supported by ‘Nanoscale regulators of photosynthesis’ NWO research project (project number: OCENW.GROOT.2019.86).
Data availability
The original contributions presented in the study are available via GitHub at https://github.com/L-Ramakers/Heimdall .
Code availability
The custom analysis code used in the study is available via GitHub at https://github.com/L-Ramakers/Heimdall .
Competing interests
The authors declare no competing interests.
Footnotes
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional afOpen asset ↗L-Ramakers/Heimdalllines:88-125Code / dataset availability confirmedEurope PMC · Crossref · checked 5 Sept 2026
Accurate tracking and measurement of pollen dispersal in the atmosphere are essential for assessing cross-pollination risks, particularly in the case of genetically engineered (GE) crops. We conducted a series of unique release-recapture field studies with GE switchgrass in Oliver Springs, TN, USA. Two hundred transgenic switchgrass plants (Panicum virgatum L. "Performer") were planted at the center of a clear-cut field, with one block of 100 plants expressing orange fluorescent protein (OFP) under a switchgrass ubiquitin promoter (PvUBI1) and another block of 100 plants expressing OFP driven by a maize pollen-specific promoter (Zm13). Pollen was sampled from the atmosphere using fixed (ground-based) and mobile (drone-based) sampling devices at different distances from the source field, with Lagrangian stochastic dispersal simulations run for sampling periods using high-resolution wind measurements. The pollen emission rate was estimated by combining simulated and measured pollen concentrations, and strong diurnal trends were observed. Diurnal emission rate trends were positively correlated with wind speed, temperature, and vapor pressure deficit, while negatively correlated with relative humidity. In low-wind meandering conditions, incorporating changing wind direction into the dispersal modeling improved pollen emission rate estimation and model-measurement comparisons. This study assesses the effectiveness of high- and low-volume pollen samplers in relation to source strength up to 1 km from the source, enhancing understanding of pollen measurement techniques. Additionally, it is a proof-of-concept for drone-based pollen sampling and GMO pollen tracking using fluorescence measurements. Results from our experiments have significant implications for cross-pollination risk assessment, prediction, and management of airborne allergens.
Why it matches plant phenotyping methods固定・ドローン搭載サンプラー、蛍光測定、風況モデルを組み合わせて植物由来の花粉放出率を推定し、花粉測定技術を評価することが中心であるため、植物の生殖状態・放出特性に関するフェノタイピング手法として採用。
abstractPollen was sampled from the atmosphere using fixed (ground-based) and mobile (drone-based) sampling devices
Reproduction assets foundThe paper's Data Availability statement deposits all sampling data, modeling code, and simulation results on the Virginia Tech Data Repository (DOI 10.7294/25733604), which is an allowed URL. This directly covers the paper's pollen concentration measurements and Lagrangian stochastic dispersal modeling. Other URLs (e.gDataset · publicAll sampling data, modeling code, and simulation results underlying this manuscript are made available on the Virginia Tech Data Repository at https://doi.org/10.7294/25733604 .Open asset ↗Virginia Tech Data Repository · 10.7294/25733604lines:201-219Code / dataset availability confirmedCrossref · Europe PMC · checked 15 Sept 2026
Turfgrass phenotyping relies heavily on visual quality (VQ) ratings and RGB indices like DGCI, but these are limited by observer subjectivity, coarse ordinal scales, or ratio formulations that do not reflect perceptual color differences. Hyperspectral and machine-learning tools overcome some limitations but remain costly and difficult to generalize, motivating the need for scalable and interpretable RGB color metrics. We introduce ΔEg, a perceptually anchored CIELAB ΔE distance from an ideal green that provides a continuous and interpretable measure of canopy color evaluated alongside a panel of RGB-derived metrics. A 3 × 3 nitrogen × irrigation greenhouse experiment using hybrid bermudagrass (TifTuf, Cynodon dactylon × C. transvaalensis) quantified canopy responses with RGB imaging, spectral reflectance, CCM-300 fluorescence, and chlorophyll assays. ΔEg correlated strongly with chlorophyll (r = 0.72), similar to DGCI (r = 0.73), and both exceeded CCM-300 (r = 0.29). HSVi showed the strongest association with VQ (r = 0.84) and was most sensitive to irrigation (ηp2 = 0.63). CIELUV v* explained the greatest model variation (R2m = 0.94) and responded most to fertilizer (ηp2 = 0.84). The yellow fraction was significant across all main and interaction effects and captured canopy decline (r = −0.82 with VQ). An illustrative decision-support scenario using ΔEg indicated that moderate fertilizer combined with mild deficit irrigation optimized turf color and input efficiency. Conclusions apply to controlled conditions, with field-scale validation identified as future work. These results demonstrate that interpretable RGB color metrics, anchored by ΔEg, offer a scalable alternative to VQ scoring and spectral systems.
Why it matches plant phenotyping methodsRGB画像から芝草キャノピー色を定量化するΔEgなどの指標を導入・比較し、クロロフィルや品質評価との技術的関連性を検証しており、植物表現型取得法が中心である。
abstractWe introduce ΔEg, a perceptually anchored CIELAB ΔE distance from an ideal green that provides a continuous and interpretable measure of canopy color evaluated alongside a panel of RGB-derived metrics.
Reproduction assets foundThe paper's Data Availability Statement deposits the phenotype data and the authors' Python image-processing/metric-computation scripts and R statistical analysis scripts in the USDA National Agricultural Library Ag Data Commons, a public repository. The full RGB imagery archive, however, is only available upon requestCode · public2025;23:673–687. doi: 10.1002/lom3.10705.
Associated Data
Data Availability Statement
Data and Python scripts used for image processing and %G, %Gr, %Y, ΔEg, DGCI, HSVi, BA SD , CIELUV v* metric computation, and R scripts used for statistical analysis are be available in the USDA National Agricultural Library Ag Data Commons ( https://agdatacommons.nal.usda.gov/ ), Data for—Proxima Green: RGB Color Metrics for Turfgrass Phenotyping in Controlled Conditions, accessed on 27 July 2026. The full RGB imagery archive will be made available upon reasonable request.Open asset ↗USDA National Agricultural Library Ag Data Commonslines:691-695Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
PlantCV is an open-source Python project aimed at developing tools to address a range of image-based, plant phenotyping questions. PlantCV has been used for more than 10 years to automate trait collection from image data, and the newest release, PlantCV version 4, continues to lower the barrier to entry for users without substantial coding experience through extensive example use-case tutorials and simplified installation. In addition to usability, we document added functionality since the release of PlantCV v2, including support for more image types such as fluorescence, thermal, and hyperspectral data. Finally, we describe the development of a new subpackage focused on morphological trait measurements like leaf angle, and demonstrate its utility as compared to more manual methods of data collection.
Why it matches plant phenotyping methods植物フェノタイピング用の画像解析ソフトウェア開発と、形態形質測定機能の実証が中心である。
abstractPlantCV is an open-source Python project aimed at developing tools to address a range of image-based, plant phenotyping questions.
Reproduction assets foundThe paper's data availability statement explicitly says that scripts used for the analyses in this paper are publicly available on GitHub (danforthcenter/plantcv-4-paper), and PlantCV source code is available via the PlantCV homepage. This is a paper-specific, public, actionable analysis-code asset.Code · publicerest.
DATA AVA I L A B I L I T Y S TAT E M E N T
Links to code, tutorials, documentation, and other resources
are available on the PlantCV homepage at https://plantcv.org. PlantCV source code is available on GitHub at https://
github.com/danforthcenter/plantcv. Scripts used for analyses
in this paper are available on GitHub at https://github.com/danforthcenter/plantcv-4-paper.O RC I D
HaleySchuhl https://orcid.org/0000-0002-8825-8297
KeelyE. Brown https://orcid.org/0000-0002-5371-5830
ParagK. Bhatt https://orcid.org/0000-0002-0396-6412
DominikSchneider https://orcid.org/0000-0002-5846-5033
Anna L. Casto https://orcid.org/0000-0002-9597-0514
Lucia Acosta-Gamboa https://orcid.org/0000-0001-77Open asset ↗danforthcenter/plantcv-4-paperpdf-raw-page:15 lines:1-92Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Published1 Jul 2026The Plant journal : for cell and molecular biologyCited by 0 · OpenAlex ↗
Genetically encoded biosensors are one of the essential tools in biological research. They enable visualization of molecules of interest from the subcellular level to entire organism level in vivo and can be used to monitor the presence of small molecules, gene expression, protein activity, and protein degradation. However, multiplexing fluorescent biosensors in plants is notoriously difficult due to signal bleed-through and strong autofluorescence from chlorophyll. In this study, we investigated the potential of multiplexing biosensors based on the selection of reporter fluorescent proteins. We characterized the emission spectra, fluorescence lifetimes, and relative brightness of diverse fluorescent proteins in plant leaves. We show that selected proteins exhibit comparable brightness, supporting their use in co-expression experiments and reliable quantification of individual signals. To separate three overlapping signals, we applied two different linear unmixing approaches and compared them to results obtained without unmixing. We identified the channel separation unmixing approach as the most suitable for biosensors. Additionally, we show how unmixing with the selected approach can be applied to separate autofluorescence and five fluorescent proteins. We further validated this approach in virus-infected cells by following organelle dynamics in vivo. Finally, we demonstrate the feasibility of high-throughput segmentation and quantification with a custom MATLAB workflow for nuclei, chloroplasts, and cytoplasm signal analysis. Overall, our work demonstrates that biosensors can be multiplexed, even when their emission spectra overlap.
Why it matches plant phenotyping methods植物組織における蛍光シグナルの分離、画像セグメンテーション、定量化ワークフローを開発・比較・検証しており、植物の細胞・細胞小器官状態を測定する方法が中心である。
abstractTo separate three overlapping signals, we applied two different linear unmixing approaches and compared them to results obtained without unmixing.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe segmentation and histograms were acquired using MATLAB script ( https://github.com/NIB‐SI/Nuclei‐segmentation ). The parameters used in the script to achieve appropriate segmentation are listed on GitHub, Case 1 ( https://github.com/NIB‐SI/Nuclei‐segmentation ).Open asset ↗NIB‐SI/Nuclei‐segmentationlines:255-341Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Accurate assessment of leaf chlorophyll is essential for understanding plant physiological responses to environmental variation. While solvent extraction provides precise chlorophyll measurements, it is destructive and temporally limited, whereas portable optical meters such as the CCM-300 enable rapid, non-destructive measurement of the chlorophyll fluorescence ratio (CFR) but require species- and season-specific calibration. This study evaluates the performance of CCM-300 measurements and reconstructs seasonal chlorophyll dynamics in field maple (Acer campestre) across two contrasting summers in the United Kingdom. Paired CFR and acetone-extracted chlorophyll data collected in 2023 were used to develop calibration models. RF regression achieved the highest predictive performance within the calibration dataset, although substantial uncertainty remained at the leaf level; a simple linear model was therefore adopted for cross-year projection due to its stability under extrapolation. Applying this calibration to daily 2022 CFR measurements generated a continuous "virtual acetone" trajectory, enabling qualitative comparison with weekly destructive extractions in 2023. Both years exhibited mid-season chlorophyll plateaus followed by late-summer declines; however, senescence, defined as the initiation of sustained post-peak decline, occurred earlier during the warmer and drier 2022 season. Mixed-effects modelling identified positive effects of temperature and wind speed on CFR in 2022, while generalised additive modelling of the 2023 dataset revealed a non-linear seasonal decline under comparatively mild conditions. Because cross-year projections rely on a low-fit linear calibration, interannual differences are interpreted primarily in terms of relative seasonal trajectory shape and timing rather than absolute chlorophyll magnitude.
Why it matches plant phenotyping methodsCCM-300による葉クロロフィル測定を破壊的測定と比較し、校正モデルの開発・性能評価と季節軌跡の再構築を行っており、植物表現型取得法が研究の中心である。
abstractThis study evaluates the performance of CCM-300 measurements and reconstructs seasonal chlorophyll dynamics in field maple (Acer campestre) across two contrasting summers in the United Kingdom.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicData Availability: Data used in the study can be accessed via https://zenodo.org/records/17475985.Open asset ↗zenodo · 17475985pdf-page:11 lines:1-44Code / dataset availability confirmedOpenAlex · Europe PMC · bioRxiv · checked 5 Sept 2026
Abstract Waterlogging is a major constraint on barley productivity, yet its dynamic, multi-phase nature makes it challenging to dissect using traditional phenotyping approaches. High-throughput phenotyping (HTP) platforms address this by enabling temporal, multi-sensor imaging of large populations, but generate complex datasets that demand new analytical frameworks. Here, we imaged 230 barley accessions over 14 days of waterlogging stress and seven days of recovery using visible, chlorophyll fluorescence, and hyperspectral sensors. Explainable AI was applied to classify stress responses into early stress, late stress, and recovery phases, achieving 86% classification accuracy, and to identify the hyperspectral indices most informative for each phase. Water index (WATER1) and structure insensitive pigment index (SIPI) emerged as primary predictors of stress response. Longitudinal genome-wide association studies (GWAS), using a treatment-by-marker interaction model, identified 236 significant loci across 12 linkage disequilibrium blocks, implicating candidate genes involved in oxidative stress regulation, transcriptional control, and auxin transport. MYB transcription factors were consistently identified across all stress phases, underscoring their central role in waterlogging adaptation. To support interpretation of longitudinal GWAS results, we developed 3D-QTLVis, an interactive visualisation tool that extends Manhattan plots across time, enabling clearer identification of dynamic genomic regions underlying stress tolerance.
Why it matches plant phenotyping methods長期マルチセンサー画像による水ストレス応答の表現型取得と、AIによるフェーズ分類・指標抽出が研究の中心であり、3D-QTLVisも開発している。
abstractHigh-throughput phenotyping (HTP) platforms address this by enabling temporal, multi-sensor imaging of large populations
Reproduction assets foundThe paper's authors publicly release their GWAS Interaction model R scripts and the 3D-QTLVis Shiny visualization tool on GitHub; no public phenotype dataset or trained model deposit is stated (phenotypic data only as summary statistics in supplements).Code · publicCode used for running the GWAS interaction model in R and the 3D-QTLVis tool are available at https://github.com/Walshj73/3D-QTLVis .Open asset ↗Walshj73/3D-QTLVislines:216-267Code / dataset availability confirmedOpenAlex · Europe PMC · checked 5 Sept 2026
Quantifying the kinetics of net CO2 assimilation (A) and stomatal conductance (gs) under fluctuating light typically relies on gas exchange measurements, which are slow and thus unsuited for high-throughput phenotyping. As a result, faster, non-invasive phenotyping methods are needed to further evaluate these traits at a larger scale. However, first the relationship between non-steady-state parameters must be examined in greater detail. In this study, we aimed to determine whether variations in non-steady-state values of chlorophyll fluorescence and leaf temperature reflect differences in key gas exchange traits under fluctuating light conditions. Here, the correlations between the times required for a change in non-steady-state A, gs, operating efficiency of PSII (ΦPSII), and leaf temperature (Tleaf) during stepwise changes in light intensity were evaluated across nine plant species. Both steady-state and non-steady-state photosynthetic traits varied significantly among species. Overall, we found significant positive correlations between non-steady-state A and ΦPSII for time to 50% and 90% of final steady-state values (t50; r2 = 0.70) and (t90; r2 = 0.33). The t90 of gs and that of Tleaf were also significantly correlated after both increases (r2 = 0.45) and decreases (r2 = 0.61) in light intensity. Our findings suggest that the times required for a change in ΦPSII (particularly t50) and Tleaf (particularly t90) can be used as indicators of dynamic A and gs, respectively, facilitating faster phenotyping of the complex processes of photosynthesis and stomatal conductance kinetics in the future.
Why it matches plant phenotyping methods非定常クロロフィル蛍光と葉温を用いて光合成・気孔コンダクタンス動態を推定する高速フェノタイピング手法を評価しており、相関検証が研究の中心である。
abstractfaster, non-invasive phenotyping methods are needed to further evaluate these traits at a larger scale.
Reproduction assets foundThe paper's primary gas exchange, chlorophyll fluorescence, and leaf temperature phenotyping data are explicitly deposited in the WUR data repository (DOI 10.17887/WUR01-TMWYJN), stated in the Data availability section. No author analysis code repository is stated; the agricolae R package is a generic library, not a论文-Dataset · publicThe primary data and associated metadata are publicly available through the WUR data repository at https://doi.org/10.17887/WUR01-TMWYJN .Open asset ↗WUR data repository · 10.17887/WUR01-TMWYJNlines:406-446Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Background High-throughput automated image analysis holds great promise for plant breeding by enabling faster, more accurate assessment of traits relevant to crop improvement. Imaging-based systems, such as the CropReporter, allow automated quantification of photosynthetic parameters like PSII efficiency under ambient light from a top-down 2D perspective. However, standard analysis tools average values across the 2D top view, overrepresenting upper leaves and underrepresenting those in the lower canopy. Upper leaves may occlude lower ones, and due to the pinhole projection of the camera, lower leaves of the same size appear smaller in the image. Consequently, vertical heterogeneity in PSII efficiency within the canopy cannot be resolved using a single 2D image. Results To address these issues, we integrated top-view PSII efficiency data (by CropReporter) with 3D structural data from RGB point clouds (by MaxiMarvin). Alignment accuracy between MaxiMarvin and CropReporter was high, with R² ≥ 0.98 for the x-axis and R² ≥ 0.99 for the y-axis. The method was tested using Chenopodium quinoa, Glycine max, and Solanum tuberosum, exposed to salinity, waterlogging and drought stress respectively. In Chenopodium quinoa, it allowed precise determination of when senescence began in the lower leaves. In Solanum tuberosum, the reduction in PSII efficiency by drought was the same for all leaf layers, while in Glycine max, waterlogging stress most strongly affected the middle layer of the canopy. Conclusions This framework enables the 3D mapping of PSII efficiency across the vertical plant profile by combining top-view chlorophyll fluorescence imaging (CropReporter) with 3D structural data (MaxiMarvin). It reveals vertical variation in photosynthetic activity across canopy layers. With standard 2D chlorophyll fluorescence imaging it is difficult to distinguish between non-photosynthetic tissues like flower heads and lower layers of leaves, that might have the same PSII values. Using height-based filtering, taking data from the 3D mapping, such distinction can be made with the method presented in this paper. This allows estimating the PSII efficiencies of leaves only. By capturing layer-specific responses to abiotic stress and developmental changes, the method provides physiologically relevant input for crop growth modelling and highlights the importance of accounting for canopy structure in photosynthetic analyses.
Why it matches plant phenotyping methods2Dクロロフィル蛍光によるPSII効率を3D植物構造へ投影し、群落層別の葉の生理形質を推定する手法の開発・検証が中心である。
abstractTo address these issues, we integrated top-view PSII efficiency data (by CropReporter) with 3D structural data from RGB point clouds (by MaxiMarvin).
Reproduction assets foundThe authors state that the analysis scripts (2D–3D alignment pipeline) and the phenotyping data used in the study are included with the publication as supplementary material, accessible via the article DOI. This is a paper-specific, publicly available asset containing the authors' analysis code and data.Dataset · publicThe scripts and the data that were used in the current study are available and added to this publication.Open asset ↗lines:143-180Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Climate change-induced drought increasingly constrains water management in mixed-species urban gardens, requiring scalable and non-destructive approaches. This study proposes an integrated framework combining chlorophyll fluorescence, RGB image indices, and machine learning to classify plant drought response patterns. Ten garden plant species were evaluated under varying soil moisture conditions. Hierarchical cluster analysis integrating fluorescence parameters and RGB indices identified three physiologically defined response clusters, and their reproducibility using RGB indices alone was assessed. A total of 1,629 samples were augmented to 1,881 using the synthetic minority over-sampling technique (SMOTE) to address class imbalance. A support vector machine (SVM) model with a radial basis function kernel, using green leaf index (GLI), normalized green-red difference index (NGRDI), blue-green pigment index (BGI), and soil moisture (%) as predictors, achieved an accuracy of 0.91 and a Kappa coefficient of 0.84. In contrast, PLS-DA showed lower performance (accuracy 0.79, Kappa 0.65), indicating limited separability under linear assumptions. These results demonstrate that RGB indices combined with nonlinear models were able to reproduce physiologically defined drought response patterns under the given conditions. As a proof of concept, this study demonstrates the potential of the proposed framework; however, its generalizability is limited by the controlled greenhouse setting, the relatively small number of species, and the lack of external validation in heterogeneous field environments. The framework may provide a cost-effective approach for classifying plant drought responses and has the potential to support the grouping of plants with similar water requirements, which could contribute to improved irrigation management in mixed-species gardens under further validation.
Why it matches plant phenotyping methodsRGB画像指標と機械学習により、植物の干ばつ応答パターンという生理状態を分類し、蛍光測定との再現性を評価しているため、表現型取得・抽出手法が中心です。
abstractThis study proposes an integrated framework combining chlorophyll fluorescence, RGB image indices, and machine learning to classify plant drought response patterns.
Reproduction assets foundThe paper explicitly states that the authors' analysis code (data processing, feature extraction, SVM/PLS-DA modeling) is publicly deposited on Zenodo with a DOI matching an allowed URL. The phenotype datasets are only said to be in the manuscript/supplementary files, so the code deposit is the qualifying paperSpecificCode · publicThe code supporting the findings of this study, including data processing, feature extraction, and machine learning modeling is available at Zenodo: https://doi.org/10.5281/zenodo.19127295 .Open asset ↗Zenodo · 10.5281/zenodo.19127295lines:98-116Code / dataset availability confirmedEurope PMC · OpenAlex · checked 14 Sept 2026
Sun-induced fluorescence (SIF) has emerged as a promising tool for tracking photosynthetic dynamics, yet its application in monitoring biotic stress remains underexplored in field conditions. In this study, we investigated the effects of Cercospora leaf spot (CLS), a destructive foliar disease of sugar beet (Beta vulgaris L.), for which traditional monitoring methods often fail to capture subtle disease effects or distinguish between structural and physiological stress responses. CLS infection was induced through artificial inoculation and manually scored. Canopy-level reflectance indices were acquired along with red and far-red passive SIF signals and active PSII efficiency traits using FloX and LIFT sensors mounted on an automated high-throughput phenotyping platform. The results demonstrate that SIF effectively detects CLS in sugar beet, with responses comparable with structural and disease- specific indices. Despite visible symptoms, PSII efficiency (Fq'/Fm') remained stable across treatments, indicating limited impairment of leaf photosynthetic efficiency at early stages. However, the canopy-level electron transport rate varied significantly and showed a strong relationship with red and far-red SIF, suggesting that CLS primarily affects canopy light absorption and utilization. After structural normalization, SIF yield remained largely unchanged, confirming that observed SIF reductions were mainly driven by canopy structural alterations. Overall the study demonstrates the effectiveness of SIF for large-scale disease monitoring and integration into high-throughput phenotyping, while also revealing structural and physiological factors influencing the SIF signal under disease stress.
Why it matches plant phenotyping methodsSIFおよびPSIIセンサーを搭載したハイスループット表現型解析プラットフォームで、サトウダイコンの病害状態と構造・生理応答を評価する手法の実質的な適用・検証が中心である。
abstractCanopy-level reflectance indices were acquired along with red and far-red passive SIF signals and active PSII efficiency traits using FloX and LIFT sensors mounted on an automated high-throughput phenotyping platform.
Reproduction assets foundThe paper's phenotyping dataset (SIF, reflectance indices, LIFT PSII traits, disease scores from the CLS sugar beet field trial) is deposited in the open access Jülich DATA repository under DOI 10.26165/JUELICH-DATA/FOQOFI. No separate author analysis code repository with explicit availability language is stated; R/lmeDataset · publicThe dataset has been deposited in the open access Jülich DATA reposi ease using UAV-supported image data and deep learning. Sugar Industry
tory: https://doi.org/10.26165/JUELICH-DATA/FOQOFI. 147, 79–86.
Ispizua Yamati FR, Bömer J, Noack N, Linkugel T, Paulus S, Mahlein
A-K. 2025. Configuration of a multisensor platform for advanced plant phe
References notyping and disease detection: case study on cercospora leaf spot in sugar
Ač A, Malenovský Z, Olejníč ková J, Gallé A, Rascher U, Mohammed beet. Smart AgricultOpen asset ↗Jülich DATA · 10.26165/JUELICH-DATA/FOQOFIpdf-layout-page:14 lines:52-72Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Summary Genetically encoded biosensors are one of the essential tools in biological research. They enable visualization of molecules of interest from the subcellular level to entire organism level in vivo and can be used to monitor presence of small molecules, gene expression, protein activity, and protein degradation. However, multiplexing fluorescent biosensors in plants is notoriously difficult due to signal bleed-through and strong autofluorescence from chlorophyll. In this study, we investigated the potential of multiplexing biosensors based on the selection of reporter fluorescent proteins. We characterized the emission spectra, fluorescence lifetimes, and relative brightness of diverse fluorescent proteins in plant leaves. We show that selected proteins exhibit comparable brightness, supporting their use in co-expression experiments and reliable quantification of individual signals. To separate three overlapping signals, we applied two different linear unmixing approaches and compared them to results obtained without unmixing. We identified channel separation unmixing approach as the most suitable for biosensors. Additionally, we show how unmixing with the selected approach can be applied to separate autofluorescence and five fluorescent proteins. We further validated this approach in virus-infected cells by following organelle dynamics in vivo . Finally, we demonstrate the feasibility of high-throughput segmentation and quantification with a custom MATLAB workflow for nuclei, chloroplasts, and cytoplasm signal analysis. Overall, our work demonstrates that biosensors can be multiplexed, even when their emission spectra overlap. Significance statement Multiplexing genetically encoded biosensors in plants has been limited by overlapping fluorescent signals and strong autofluorescence. This study presents an optimized framework for linear unmixing and provides a MATLAB-based organelle segmentation tool, allowing precise quantification of multiple fluorescent reporters in vivo and advancing real-time visualization of complex cellular processes in plants.
Why it matches plant phenotyping methods植物組織における蛍光シグナルの分離、検出、セグメンテーション、定量化手法を開発・比較・検証しており、植物の細胞・細胞小器官状態を取得する方法が中心である。
abstractTo separate three overlapping signals, we applied two different linear unmixing approaches and compared them to results obtained without unmixing.
Reproduction assets foundThe paper deposits raw confocal image data on Zenodo (10.5281/zenodo.19691651) and a MATLAB nuclei segmentation/quantification script on GitHub. Only the GitHub repository URL appears in the allowed URL list, so the code asset is reported; the Zenodo image deposit is noted but cannot be listed without a matching URL.Code · publici (ORCID: 0000-0002-6235-2816)
14
15 DATA AVAILABILITY
16 Raw image data supported with metadata were deposited to Zenodo:
17 10.5281/zenodo.19691651and can be opened with LAS X available at https://www.leica-
18 microsystems.com/products/microscope-software/p/leica-las-x-ls/downloads/. MATLAB script
19 was deposited to GitHub: https://github.com/NIB-SI/Nuclei-segmentation.
20 FUNDING
21 This research was funded by the Slovenian Research and Innovation Agency (research core
22 funding No. P4-0165, P4-0463, projects J4-1777, J4-60073, J4-70169 and ARIS program for
23 young researchers).
24 CONFLICT OF INTEREST
25 The authors declare no conflicts of interest. This article does not contain any Open asset ↗NIB-SI/Nuclei-segmentationpdf-layout-page:1 lines:1-34Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Abstract Accurate tracking and measurement of pollen dispersal in the atmosphere are essential for assessing cross-pollination risks, particularly in the case of genetically engineered (GE) crops. We conducted a series of unique release-recapture field studies with GE switchgrass in Oliver Springs, Tennessee, USA. Two hundred transgenic switchgrass plants ({\it Panicum virgatum L.} `Performer') were planted at the center of a clear-cut field, with one block of 100 plants expressing orange fluorescent protein (OFP) under a maize ubiquitin promoter (PvUBI1) and another block of 100 plants expressing OFP driven by a maize pollen-specific promoter (Zm13). Pollen was sampled from the atmosphere using fixed (ground-based) and mobile (drone-based) sampling devices at different distances from the source field, with Lagrangian Stochastic dispersal simulations run for sampling periods using high-resolution wind measurements. The pollen emission rate was estimated by combining simulated and measured pollen concentrations, and strong diurnal trends were observed. Diurnal emission rate trends were positively correlated with wind speed, temperature, and vapor pressure deficit, while negatively correlated with relative humidity. In low-wind meandering conditions, incorporating changing wind direction into the dispersal modeling improved pollen emission rate estimation and model-measurement comparisons. This study assesses the effectiveness of high and low volume pollen samplers in relation to source strength up to 1 km from the source, enhancing understanding of pollen measurement techniques. Additionally, it is a proof-of-concept for drone-based pollen sampling and GMO pollen tracking using fluorescence measurements. Results from our experiments have significant implications for cross-pollination risk assessment, prediction, and management of airborne allergens.
Why it matches plant phenotyping methods固定・ドローン型サンプラーと蛍光測定、分散モデルを用いて植物由来花粉の放出量を推定し、サンプリング技術を評価することが中心であるため。
abstractPollen was sampled from the atmosphere using fixed (ground-based) and mobile (drone-based) sampling devices
Reproduction assets foundThe authors state that all sampling data, modeling code, and simulation results from this switchgrass pollen dispersal study are publicly available in a Virginia Tech figshare repository. The GitHub 3D-printing files are cited prior work (Powers et al. 2018), not a paper-specific asset.Dataset · public737 Statements and Declarations
738 Data and code availability
739 All sampling data, modeling code, and simulation results are made available in the
740 Virginia Tech Data repository:
741 https://figshare.com/s/54a308163b60865d55bf.
742 Competing interests
743 The authors have no competing interests to declare.
744 Funding
745 This work is supported in part by the Biotechnology Risk Assessment Program, project
746 award no. 2019-33522-29989, from the U.S. Department of Agriculture’s National
747 Institute of Food and Agriculture.
748 References
749 AdamovOpen asset ↗figsharepdf-layout-page:28 lines:1-46Code / dataset availability confirmedCrossref · checked 5 Sept 2026
Abstract Photosynthetic organisms have evolved multiple non-photochemical quenching (NPQ) processes, providing photoprotection by safely dissipating excess excitation energy. These processes involve various molecular players functioning on overlapping timescales from seconds to days, making it challenging to isolate and quantify their individual kinetics. In this study, we perform whole-leaf chlorophyll fluorescence lifetime and xanthophyll concentration measurements on wild-type and various newly characterized NPQ mutants of Nicotiana benthamiana , a vascular land plant. Based on these measurements, we construct a fluorescence lifetime-based quantitative kinetic model that disentangles individual photoprotection components and, when integrated additively, accurately predicts wild-type and mutant NPQ behaviors under various light-dark regimes. Additionally, the model quantifies the per-molecule quenching effectiveness of various xanthophylls and the contributions of six quenching components (qE V , qE A, qE Z, qE L, qZ, and qI) across different genotypes. It also suggests improved overall quenching efficiency at specific VDE:ZEP:PsbS overexpression stoichiometries, aligning with previous studies and supporting translational efforts to optimize photoprotection and enhance crop yields under dynamic light environments.
Why it matches plant phenotyping methods葉の蛍光寿命測定を基盤に、NPQ成分を分離・定量するモデルを構築しており、植物の光防護状態を取得・抽出する方法が研究の中心です。
abstractBased on these measurements, we construct a fluorescence lifetime-based quantitative kinetic model that disentangles individual photoprotection components and, when integrated additively, accurately predicts wild-type and mutant NPQ behaviors under various light-dark regimes.
Reproduction assets foundThe paper's fluorescence lifetime/pigment phenotyping data and the NPQ model code are both publicly deposited on Zenodo (DOI 10.5281/zenodo.16755870), per explicit Data availability and Code availability statements.Dataset · publicThe data supporting the findings of this study are available within the article and at https://doi.org/10.5281/zenodo.16755870 .Open asset ↗Zenodo · 10.5281/zenodo.16755870lines:171-237Code · publicThe codes for NPQ models used in this study are available at https://doi.org/10.5281/zenodo.16755870 .Open asset ↗Zenodo · 10.5281/zenodo.16755870lines:171-237Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
Abstract PlantCV is an open‐source Python project aimed at developing tools to address a range of image‐based, plant phenotyping questions. PlantCV has been used for more than 10 years to automate trait collection from image data, and the newest release, PlantCV version 4, continues to lower the barrier to entry for users without substantial coding experience through extensive example use‐case tutorials and simplified installation. In addition to usability, we document added functionality since the release of PlantCV v2, including support for more image types such as fluorescence, thermal, and hyperspectral data. Finally, we describe the development of a new subpackage focused on morphological trait measurements like leaf angle, and demonstrate its utility as compared to more manual methods of data collection.
Why it matches plant phenotyping methodsPlantCV v4は、画像から植物形質を自動抽出するオープンソースソフトウェアの開発・機能拡張・比較評価を主題としており、植物フェノタイピング手法が中心である。
abstractPlantCV is an open‐source Python project aimed at developing tools to address a range of image‐based, plant phenotyping questions.
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the authors' analysis scripts on GitHub (danforthcenter/plantcv-4-paper), which directly reproduces this paper's phenotyping analyses.Code · publicerest.
DATA AVA I L A B I L I T Y S TAT E M E N T
Links to code, tutorials, documentation, and other resources
are available on the PlantCV homepage at https://plantcv.org. PlantCV source code is available on GitHub at https://
github.com/danforthcenter/plantcv. Scripts used for analyses
in this paper are available on GitHub at https://github.com/danforthcenter/plantcv-4-paper.O RC I D
HaleySchuhl https://orcid.org/0000-0002-8825-8297
KeelyE. Brown https://orcid.org/0000-0002-5371-5830
ParagK. Bhatt https://orcid.org/0000-0002-0396-6412
DominikSchneider https://orcid.org/0000-0002-5846-5033
Anna L. Casto https://orcid.org/0000-0002-9597-0514
Lucia Acosta-Gamboa https://orcid.org/0000-0001-77Open asset ↗danforthcenter/plantcv-4-paperpdf-raw-page:15 lines:1-97Code / dataset availability confirmedCrossref · Europe PMC · checked 5 Sept 2026
Understanding how plants perceive and respond to environmental and developmental cues requires tools capable of monitoring molecular signals in vivo, across whole tissues, and in real time. Genetically encoded fluorescent indicators, coupled with fluorescence microscopy, have transformed plant biology, but their application remains largely confined to small model organisms and specialized microscopy instrumentation. Here, we present MAcro Plant Projection Imaging (MAPPI), an open-source, low-cost, and modular fluorescence imaging platform for soil-grown plants beyond the model organism or seedling stage. MAPPI enables wide field-of-view, dual-projection imaging of fluorescent reporters, supporting real-time visualization of systemic signals under near-physiological conditions. We validate MAPPI by tracking calcium and l -glutamate dynamics in adult Nicotiana benthamiana plants, revealing developmentally regulated long-distance calcium waves triggered by wounding, burning, or submergence, including bidirectional shoot-to-root and root-to-shoot signaling. By democratizing access to whole-plant functional imaging, MAPPI provides a scalable tool for dissecting signal propagation, stress adaptation, and systemic communication in both model and nonmodel species.
Why it matches plant phenotyping methods植物全体の蛍光シグナルをリアルタイム取得する低コスト・オープンな画像プラットフォームを開発し、成体植物で検証しているため、植物表現型取得法が研究の中心です。
abstractHere, we present MAcro Plant Projection Imaging (MAPPI), an open-source, low-cost, and modular fluorescence imaging platform for soil-grown plants beyond the model organism or seedling stage.
Reproduction assets foundThe authors publicly deposit raw imaging data and MAPPI analysis code on Zenodo, host the MAPPI acquisition/analysis code on GitHub, and release the napari-roi-registration image registration plugin on GitHub. All are paper-specific, public, and actionable.Dataset · publicThe raw data for the images presented in the manuscript and the code to run the MAPPI system are available on Zenodo ( https://doi.org/10.5281/zenodo.15845576 ).Open asset ↗Zenodo · 10.5281/zenodo.15845576lines:170-466Code · publicThe code to run the MAPPI system is also available on the dedicated GitHub repository ( https://github.com/micropolimi/MAPPI ) along with the code used to analyze the data.Open asset ↗GitHub · micropolimi/MAPPIlines:170-466Code · publicThe software is open-source and available on GitHub ( https://github.com/GiorgiaTortora/napari-roi-registration ) and the napari-hub ( www.napari-hub.org/plugins/napari-roi-registration ).Open asset ↗GitHub · GiorgiaTortora/napari-roi-registrationlines:156-169Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
To address the issue of drought level confusion in the detection of drought stress during the seedling stage of the Yunnan large-leaf tea variety using the traditional YOLOv13 network, this study proposes an improved version of the network, MC-YOLOv13-L, based on animal vision. With the compound eye's parallel sampling mechanism at its core, Compound-Eye Apposition Concatenation optimization is applied in both the training and inference stages. Simulating the environmental information acquisition and integration mechanism of primates' "multi-scale parallelism-global modulation-long-range integration," multi-scale linear attention is used to optimize the network. Simulating the retinal wide-field lateral inhibition and cortical selective convergence mechanisms, CMUNeXt is used to optimize the network's backbone. To further improve the localization accuracy of drought stress detection and accelerate model convergence, a dynamic attention process simulating peripheral search, saccadic focus, and central fovea refinement in primates is used. Inner-IoU is applied for targeted improvement of the loss function. The testing results from the drought stress dataset (324 original images, 4212 images after data augmentation) indicate that, in the training set, the Box Loss, Cls Loss, and DFL Loss of the MC-YOLOv13-L network decreased by 5.08%, 3.13%, and 4.85%, respectively, compared to the YOLOv13 network. In the validation set, these losses decreased by 2.82%, 7.32%, and 3.51%, respectively. On the whole, the improved MC-YOLOv13-L improves the accuracy, recall rate and mAP@50 by 4.64%, 6.93% and 4.2%, respectively, on the basis of only sacrificing 0.63 FPS. External validation results from the Laobanzhang base in Xishuangbanna, Yunnan Province, indicate that the MC-YOLOv13-L network can quickly and accurately capture the drought stress response of tea plants under mild drought conditions. This lays a solid foundation for the intelligence-driven development of the tea production sector and, to some extent, promotes the application of bio-inspired computing in complex ecosystems.
Why it matches plant phenotyping methods茶樹の干ばつストレス状態を画像から検出する改良YOLO手法を開発・検証しており、植物状態の取得・推定が研究の中心である。
abstractthis study proposes an improved version of the network, MC-YOLOv13-L, based on animal vision.
Reproduction assets foundThe paper's Data Availability Statement states the original code is openly available in IEEE DataPort at the allowed DOI URL, making the authors' analysis code a paper-specific public asset.Code · publicThe original code presented in the study are openly available in IEEE DataPort at https://dx.doi.org/10.21227/v32y-mv49.Open asset ↗IEEE DataPort · 10.21227/v32y-mv49html-lines:829-851Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Published1 Jan 2026The Plant journal : for cell and molecular biologyCited by 4 · OpenAlex ↗
Live imaging data analysis often requires an objective, local, and accurate way of quantification of cell dynamics. In the research field of polarized tip-growth, the cell fluctuations and/or fluctuations in tip position and growth direction hamper automated analyses of huge amounts of imaging sequences. The fluctuated nature in data makes it unclear how cell shape and growth are linked to intracellular events that could be the actual driving force of cell growth. To overcome these difficulties, we developed a powerful and user-friendly tool called KymoTip with an available format. In this software, novel functions such as coordinate normalization, tip-bottom detection, and signal kymograph were implemented. We confirmed that not only plasma membrane-labeled fluorescent images, but also images such as bright-field and cortical microtubule markers-so long as the cell contours can be identified-are amenable to KymoTip. Furthermore, by combining markers for cell contours with those that visualize intracellular structures, it becomes possible to quantitatively analyze various intracellular events, such as nuclear migration and calcium wave, in conjunction with cellular growth dynamics. Since KymoTip can be handled by non-specialists, it is expected to promote understanding of what happens at the sub- and cellular level with high-throughput outcomes.
Why it matches plant phenotyping methods植物細胞のライブ画像から細胞形状・先端位置・成長方向・成長動態を定量化する解析ソフトウェアを開発しており、植物表現型取得・抽出が研究の中心である。
abstractwe developed a powerful and user-friendly tool called KymoTip
Reproduction assets foundThe paper's Data Availability Statement explicitly provides public authors' code repositories (KymoTip analysis tool and SAM2 segmentation code) and a figshare deposit of the raw imaging data used for the tip-growth phenotyping measurements.Code · publicThe code for KymoTip is available on GitHub: https://github.com/blues0910/KymoTipOpen asset ↗blues0910/KymoTiphtml-lines:159-244Code · publicthe code for SAM2 segmentation is available at https://github.com/YusukeKimata‐Moo/SAM2‐segmentation/Open asset ↗YusukeKimata‐Moo/SAM2‐segmentationhtml-lines:159-244Dataset · publicThe raw data used in this paper are available on figshare: https://doi.org/10.6084/m9.figshare.30847580Open asset ↗figshare · 10.6084/m9.figshare.30847580html-lines:159-244Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Field / plotChlorophyll fluorescenceLeafPhysiological trait estimationGrowth / development / phenologyPhotosynthesis / fluorescencePigment / colour / senescence
Abstract Accurate assessment of leaf chlorophyll is essential for understanding plant physiological responses to environmental variation. While solvent extraction provides precise chlorophyll concentrations, it is destructive and temporally limited. In contrast, portable optical meters such as the CCM-300 enable rapid, non-destructive measurements of chlorophyll fluorescence ratio (CFR), but their calibration against extracted pigments is often species- and season-specific. This study evaluated the reliability of CCM-300 measurements and reconstructed seasonal chlorophyll dynamics in Acer campestre across two contrasting summers in the United Kingdom.Paired CFR and acetone-extracted chlorophyll data collected in 2023 were used to develop calibration models. Random Forest regression achieved the best predictive accuracy (R² = 0.51, RMSE = 0.51 mg cm⁻²), although a simple linear model was adopted for cross-year projection due to its stability. Applying this calibration to daily 2022 CFR measurements generated a “virtual acetone” chlorophyll time series, allowing comparison with weekly destructive extractions in 2023. Both years exhibited mid-season chlorophyll plateaus followed by late-summer declines, but senescence occurred approximately ten days earlier in the warmer, drier 2022 season.Mixed-effects modelling of the 2022 data indicated positive effects of temperature (β = 0.0029 ± 0.0012 SE) and wind speed (β = 0.0053 ± 0.0021 SE) on CFR, whereas day of year and precipitation were not significant. A generalised additive model for 2023 explained 90% of deviance (adj. R² = 0.89) and revealed significant nonlinear effects of temperature, rainfall, and wind speed. Together, these results demonstrate that the CCM-300 can provide a robust non-destructive proxy for total chlorophyll when properly calibrated, and that Acer campestre chlorophyll dynamics are highly sensitive to interannual climatic variability.
Why it matches plant phenotyping methodsCCM-300による葉クロロフィル測定を抽出クロロフィルと比較・較正し、季節時系列へ適用して信頼性を評価しているため、植物フェノタイピング手法が中心である。
abstractThis study evaluated the reliability of CCM-300 measurements and reconstructed seasonal chlorophyll dynamics in Acer campestre across two contrasting summers in the United Kingdom.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicData Availability: Data used in the study can be accessed via https://zenodo.org/records/17475985.Open asset ↗zenodo · 17475985pdf-page:11 lines:1-44Code / dataset availability confirmedEurope PMC · bioRxiv · Crossref · checked 14 Sept 2026
ABSTRACT The development of remote sensing methods to estimate plant functional diversity is limited by mismatches between ecology and remote sensing sampling schemes, and the limited representativeness of local field campaigns. The Biodiversity Observing System Simulation Experiment (BOSSE) provides a modeling framework for benchmarking new methodologies. We used BOSSE to simulate 180 different synthetic “Scenes” encompassing a two-year-long time series of plant trait maps and imagery of hyperspectral reflectance factors, spectral indices, sun-induced chlorophyll fluorescence, land surface temperature, and estimates of plant traits (optical traits). We used these simulations to answer five fundamental, yet unsolved, questions: Q1. How should remote sensing characterize functional diversity in large surfaces (sites)? Diversity metric values saturate with the number of pixels involved, hampering comparisons between plant traits and remote sensing estimates in large areas. The average value of metrics computed over small samples should be used instead. Q2. Which sources of spectral information (or combinations thereof) can best capture plant functional diversity at the site scale? Accounting for background effects is the key. Optical traits (remote sensing estimates of plant traits) are the best estimators for plant functional diversity. Other variables succeed when filtered out of the soil pixels; their combination did not yield additional advantages. Q3. How should remote sensing estimates be validated/compared with plant functional diversity measurements? Leaf area index (LAI) is a better proxy of abundance than the pixel for Q Rao, but not for variance-based partitioning. It is more sensitive to sample size, but also more resistant to suboptimal spatial resolution. Q4. When (in the phenological year) can remote sensing best capture site-scale plant functional diversity? The estimation error decreased with LAI and stabilized at values above 1 m²/m². Q5. Which approaches and remote sensing variables are more resistant to the effects of suboptimal spatial resolution? Optical traits, fluorescence, and reflectance factors were the most robust variables. Still, field data resolution needs to be degraded to match the sensor’s resolution. We found a relative spatial resolution threshold of ∼30 % (where the pixel is around three times larger than the plants). Simulation frameworks like BOSSE enable testing methodologies beyond local contexts and address the current shortage of suitable global datasets, supporting the application and development of methods for assessing plant functional diversity with remote sensing. In the future, BOSSE could contribute to understanding observational results, refining and pre-testing new methodologies, and supporting the development of comparable experimental datasets.
Why it matches plant phenotyping methodsBOSSEを用いてリモートセンシングによる植物形質・機能多様性推定手法をシミュレーションベンチマークし、検証・比較する研究であり、植物フェノタイピング手法が中心である。
abstractThe Biodiversity Observing System Simulation Experiment (BOSSE) provides a modeling framework for benchmarking new methodologies.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicvariables, we used the “pyGNDiv” package (https://github.com/JavierPachecoLabrador/pyGNDiv-Open asset ↗JavierPachecoLabrador/pyGNDiv- · pyGNDivpdf-page:11 lines:1-60Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
Significance Statement Early studies noting uneven spatial distribution of progeny genotypes after pollination support a hypothesis where differences in pollen tube growth rate can bias inheritance. We used computer vision and statistical analysis to show alleles reducing maize pollen fitness are likely to produce statistically significant increasing, decreasing, or curvilinear spatial patterns from the apex of the inflorescence to the base, suggesting that differential pollen tube growth is not the only mechanism at play. Summary Often, more pollen grains land on recipient flowers than there are ovules to fertilize. Consequently, the haploid male gametophyte engages in post-pollination competition, one way that pollen genotype can influence inheritance. The maize ( Zea mays subsp. mays L.) inflorescence (ear), with its elongated stigma and style structures (silks), has a conspicuous spatial heterogeneity, with longer silks at the base of the ear than those at the apex. To evaluate the hypothesis that alleles with reduced pollen fitness influence the spatial distribution of progeny genotypes along the ear, we developed an updated phenotyping platform that maps mutant Ds-GFP kernel phenotypes on the ear via an implementation of the Faster R-CNN machine vision model (EarVision.v2) and a statistical pipeline that evaluates the relationship between kernel position and transmission ratio (EarScape). In our dataset (1384 ears) representing 58 Ds-GFP alleles, none with Mendelian inheritance (0/48) showed any significant pollen-conditioned spatial trend. In contrast, 50% of alleles with a pollen-specific transmission defect (5/10) exhibited significant spatial effects. An insertion into a gene encoding a putative actin-binding protein, base-to-apex gradient1* ( bag1* ), conditions increased mutant transmission at the ear apex relative to the base. Surprisingly, mutant alleles of two other pollen-expressed genes can generate the opposite pattern, decreased mutant transmission toward the ear apex; and two mutant alleles of the sperm-cell attachment factor, gamete expressed2 ( gex2 ), can produce ears with transmission highest at both base and apex. We conclude that pollen fitness mutants have relatively common but heterogenous effects on the spatial distribution of progeny genotypes.
Why it matches plant phenotyping methodsトウモロコシ穂上のカーネル表現型を画像認識でマッピングし、空間的位置と遺伝子型伝達比を解析するプラットフォームおよび統計パイプラインを開発しており、表現型取得・抽出法が研究の中心である。
abstractwe developed an updated phenotyping platform that maps mutant Ds-GFP kernel phenotypes on the ear via an implementation of the Faster R-CNN machine vision model (EarVision.v2) and a statistical pipeline that evaluates the relationship between kernel position and transmission ratio (EarScape).
Reproduction assets foundThe paper's maize ear phenotyping assets are publicly available: the EarVision.v2 repo contains the training images with bounding-box annotations and the trained Faster R-CNN model, and the EarScannerUtilities repo contains the ear-scanning/projection code. The EarScape spatial-analysis repo (with coordinate .xml filesCode · publica license to display the preprint in perpetuity. It is made
available under a CC-BY 4.0 International license.
540 Varifocal Lens 1080P USB Camera with H.264 High DeYinition Sony IMX323 Webcam. The
541 code for scanning ears, generating projections, and uploading those into cloud storage was
542 also updated and is available at https://github.com/fowler-lab-osu/EarScannerUtilities.
543 The set of ear projections used for the training set included 409 examples from the
544 summer Yield seasons of 2018, 2019 and 2022, encompassing images generated from three
545 different digital cameras and two different versions of the MES. For this training set,
546 projections were manually annotated usingOpen asset ↗fowler-lab-osu/EarScannerUtilitiespdf-layout-page:20 lines:1-56Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Global climate change and urbanization have posed challenges to sustainable food production and resource management in agriculture. Vertical farming, in particular, allows for high-density cultivation on limited land but requires precise control of crop height to suit vertical farming systems. Tomato, a globally significant vegetable crop, urgently requires mutant varieties that suppress indeterminate growth for effective cultivation in vertical farming systems. In this study, we utilized the CRISPR-Cas9 system to develop a new tomato cultivar optimized for vertical farming by editing the Gibberellin 20-oxidase ( SlGA20ox ) genes, which are well known for their roles in the "Green Revolution". Additionally, we proposed a volumetric model to effectively identify mutants through non-destructive analysis of chlorophyll fluorescence. The proposed model achieved over 84 % classification accuracy in distinguishing triple-determinate and slga20ox gene-edited plants, outperforming traditional machine learning methods and 1D-CNN approaches. Unlike previous studies that primarily relied on manual feature extraction from chlorophyll fluorescence data, this research introduced a deep learning framework capable of automating feature extraction in three dimensions while learning the temporal characteristics of chlorophyll fluorescence imaging data. The study demonstrated the potential to classify tomato plants customized for vertical farming, leveraging advanced phenotypic analysis methods. Our approach explores new analytical methods for chlorophyll fluorescence imaging data within AI-based phenotyping and can be extended to other crops and traits, accelerating breeding programs and enhancing the efficiency of genetic resource management.
Why it matches plant phenotyping methodsトマトのクロロフィル蛍光画像から遺伝子編集植物を識別する3次元深層学習モデルを提案し、既存手法と比較評価しており、表現型取得・抽出法が研究の中心である。
abstractAdditionally, we proposed a volumetric model to effectively identify mutants through non-destructive analysis of chlorophyll fluorescence.
Reproduction assets foundThe authors state that the dataset and source code used in this study are publicly available on GitHub, which qualifies as a paper-specific public code asset for the CF 3D-CNN phenotyping analysis.Code · publicThe dataset and source code used in this study are available at https://github.com/youzh-all/CF_3D-CNN .Open asset ↗https://github.com/youzh-all/CF_3D-CNN · CF_3D-CNNlines:358-392Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
Drought is one of the main factors affecting mung bean production in China. Screening drought-resistant germplasm resources and cultivating drought-resistant varieties are of great significance to the development of the mung bean industry in China. Combined with chlorophyll fluorescence imaging technology, this paper proposes a lightweight mung bean drought resistance identification network model based on YOLOv8, referred to as CSCA-YOLOv8. The model uses StarNet to replace the backbone network of YOLOv8 to reduce the size of the model. The C2f_Star module is introduced in the neck structure instead of the original C2f module. Then, in order to enhance the network's attention to the key regions in the feature map, the Context Anchor Attention Mechanism (CAA) module is also introduced into the fourth C2f_Star module. Then, a CGBD module is proposed in the neck structure to reconstruct the ordinary convolution to improve the feature extraction ability of the model for small targets. Finally, the SIoU loss function is used to replace CIoU to accelerate the convergence of the model. In the actual data analysis, we used the collected 4808 chlorophyll fluorescence images of the natural mung bean population under drought stress to make the Mungbean Drought Datatset(MDD) and made classification labels for each image according to different drought resistance levels, which were 0, 1, 2, 3, 4 and 5. We also verified the excellent performance and generalization performance of the model using the collected MDD dataset. The final experimental results show that compared with the YOLOv8s baseline model, the number of parameters of our proposed algorithm is reduced by 24%, the floating point number is reduced by 35%, and the accuracy is improved by 2.52%, which supports the deployment on embedded edge devices with limited computing power. Therefore, our proposed algorithm has great potential in the field of drought resistance identification and germplasm selection of mung bean.
Why it matches plant phenotyping methods乾燥抵抗性を推定するクロロフィル蛍光画像ベースのYOLOv8改良モデルを開発し、データセット上で性能・汎化性能を検証しており、表現型取得・抽出手法が中心である。
abstractCombined with chlorophyll fluorescence imaging technology, this paper proposes a lightweight mung bean drought resistance identification network model based on YOLOv8
Reproduction assets foundThe paper's data availability statement explicitly deposits the authors' MDD chlorophyll fluorescence image dataset (4808 mung bean drought-resistance images with labels) and their CSCA-YOLOv8 source code on a public GitHub repository, making both directly actionable paper-specific assets.Code · publicThe dataset and source code are
available on Github.Open asset ↗pdf-page:3 lines:1-51Code / dataset availability confirmedCrossref · Europe PMC · checked 15 Sept 2026
Abstract Correlative imaging is a powerful tool for revealing information on cell-type structures and their biochemistry, with the potential to inform healthier food choices and improved dietary recommendations. Determination of plant structures and their structural biochemistry advances our understanding of specific structures designed to store different biomolecules within cells and tissues. Compared to the classical biochemical separation techniques, the key advantage of sequential correlative imaging techniques is in relating spatial plant (micro)structures to their biochemistry in a nondestructive manner. Sequential imaging reported here comprises six methodologies on a single sample, a cross-section of a Tartary buckwheat (Fagopyrum tataricum) grain, namely, bright-field and autofluorescence microscopy, fluorescence microspectroscopy, MeV-secondary ion mass spectrometry, micro-particle-induced X-ray emission, scanning electron microscopy coupled with energy dispersive X-ray spectroscopy, and laser ablation-inductively coupled plasma-mass spectrometry. Results confirm that the stepwise addition of the desired information across several classes of biomolecules and several spatial scales informs the quality and safety of plant-based produce across scales. Therefore, a viable workflow is proposed, enabling sequential spatial analysis of grain and highlighting plant structures' in situ specificity. The advantages and disadvantages of the selected methodologies were critically evaluated.
Why it matches plant phenotyping methods植物粒の構造とその化学的特徴を複数の相関イメージング法で取得する再利用可能なワークフローを提案し、各手法の長短も評価しているため、表現型取得法が中心である。
abstractTherefore, a viable workflow is proposed, enabling sequential spatial analysis of grain and highlighting plant structures' in situ specificity.
Reproduction assets foundThe paper explicitly points to a public Zenodo deposit containing the correlative imaging data (SEM, micro-PIXE, MeV-SIMS maps) used in its analyses, with instructions for reproducing image fusion in Wolfram Mathematica or ImageJ.Dataset · publicsed to reveal the allocation of K
to cotyledons (Supplementary Fused Image 1). Similarly, on
the same SEM image, MeV-SIMS distribution maps under the
selected peak were overlaid (Supplementary Fused Image 2).
Custom combinations can be done in the Wolfram
Mathematica program or in ImageJ (Merge Channels) using
data available at https://doi.org/10.5281/zenodo.14628251, fol
lowing the instructions in the Materials and Methods.
Conclusions
The low emission properties of fluorescence biomolecules,
when excited with 405 nm light, inherently limit the informa
tion acquired using fluorescence imaging. At this excitation
wavelength, catechin may be the primary fluorophore in
Tartary buckwheat cotOpen asset ↗zenodo · 10.5281/zenodo.14628251pdf-raw-page:13 lines:1-89Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
Hyperspectral reflectance provides rapid and precise phenotyping of plants in a non-destructive manner both in field and well-controlled settings. The resulting data have been used to devise machine learning (ML) models for paired measurements of different traits in diverse plants and crops. Yet, despite advances in using of hyperspectral data to reliably predict crop traits of interest, there are pressing issues concerning the training of ML models, the aggregation of data from crop field trials, and the generalizability of the models in different prediction settings. We collected hyperspectral reflectance data along with 25 anatomical, gas exchange, and chlorophyll fluorescence traits from 320 recombinant inbred lines of a maize Multi-Parent Advanced Generation Inter-Cross population grown across three consecutive seasons. We use these data to systematically: (1) compare the performance of representative ML models for different traits, including slow fluorescence kinetics whose predictability by hyperspectral data has not yet been investigated, (2) evaluate the ML model performance in prediction scenarios concerning unseen genotypes, unseen seasons, and the combination thereof, (3) investigate the effects of data aggregation of ML model performance. These problems are addressed in a rigorous nested cross-validation setting that provides a template for adequate assessment of performance of ML models for diverse crop traits considering the particularities of the experimental design.
Why it matches plant phenotyping methodsトウモロコシのハイパースペクトル反射データによる形質推定について、複数の機械学習モデル、未知遺伝子型・季節への汎化性能、データ統合の影響を系統的かつネスト化交差検証で評価しており、フェノタイピング手法の検証が中心である。
abstractWe use these data to systematically: (1) compare the performance of representative ML models for different traits, including slow fluorescence kinetics whose predictability by hyperspectral data has not yet been investigated, (2) evaluate the ML model performance in prediction scenarios concerning unseen genotypes, unseen seasons, and the combination thereof, (3) investigate the effects of data aggregation of ML model performance.
Reproduction assets foundThe paper's data availability statement explicitly provides all code and raw data (hyperspectral reflectance and trait measurements) for reproducibility via the authors' public GitHub repository.Code · publicidge, Cambridge, UK
9
†
These authors contributed equally.
10
*
Corresponding authors.
11
12
Email address:
13
rudan.xu@uni-potsdam.de
14
jfergu@essex.ac.uk
15
jk417@cam.ac.uk
16
nikoloski@mpimp-golm.mpg.de
17
18
Data availability statement
19
All code and raw data to ensure reproducibility of the results can be accessed at:
20
https://github.com/Rudan-X/HyperspectralML
21
22
Funding statement:
23
J.F. was supported by the European Union’s Horizon 2020 research and innovation program
24
grant 862201 (to J.K. and Z.N.). R.X. was supported by the International Max Planck Research
25
School "Molecular Plant Science" between the Max Planck Institute of Molecular Plant
26
Physiology and the UniveOpen asset ↗Rudan-X/HyperspectralMLpdf-raw-page:1 lines:1-71Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Fluctuations and propagation of cytosolic calcium levels at both the cellular and tissue levels show complex patterns, referred to as calcium signatures, that regulate growth, organ development, damage responses, and survival. The quantitative analysis of calcium signatures at the cellular level is essential for identifying unique patterns that coordinate biological processes. However, a versatile framework applicable to multiple tissue types, allowing researchers to compare, measure, and validate diverse responses and recognize conserved patterns across model organisms, is missing. Here, we present a post-processing tool, CalciumInsights, which leverages the R packages Shiny and Golem. This tool has a graphical user interface and does not require software programming experience to perform calcium signal analysis. The open-source software has a modular framework with standardized functionalities that can be tailored for various research approaches. CalciumInsights provides descriptive statistical analysis through various metrics extracted from dynamic calcium transients and oscillations, such as peak amplitude, area under the curve, frequency, among others. The tool was evaluated with fluorescence imaging data from three model organisms: Danio rerio , Arabidopsis thaliana , and Drosophila melanogaster , demonstrating its ability to analyze diverse biological responses and models. Finally, the open-source nature of CalciumInsights enables community-driven improvements and developments for enabling new applications. Author Summary This manuscript introduces CalciumInsights, an open-source tool for calcium signature analysis. Designed to be a versatile tool that works with various tissue types and biological systems, CalciumInsights has an easy-to-use graphical user interface. Our program simplifies metrics extraction while maintaining the quality of the analysis by integrating several algorithms. CalciumInsights stands out for its user-friendliness, ease of use, and robust data exploration features, such as tunable filters for improved accuracy. These features promote inclusivity and lower barriers to scientific research by making calcium signature analysis accessible to users of all programming skill levels.
Why it matches plant phenotyping methods植物の蛍光イメージングからカルシウム動態という生理状態を抽出・定量するオープンソース解析ツールが中心であり、植物を含む複数生物種のデータで評価されている。
abstractHere, we present a post-processing tool, CalciumInsights, which leverages the R packages Shiny and Golem.
Reproduction assets foundThe paper describes CalciumInsights, an open-source R/Shiny tool for calcium transient analysis. The authors explicitly state their code is publicly available on GitHub, which constitutes the paper's computational analysis asset. No plant-phenotyping datasets, images, or trained models are described; the tool is tissueCode · publicnt for publication
All authors have reviewed the manuscript and approved the final draft for publication.
Resource availability
Lead contact: Further information and requests for data may be directed to and will be
fulfilled by Mauricio Cabrera (mauricio.cabrera1@upr.edu)
Code: All codes used are publicly available in GitHub at https://github.com/AOG-Lab/CalciumInsights
References
1. Berridge MJ, Lipp P, Bootman MD. The versatility and universality of calcium signalling. Nat
Rev Mol Cell Biol [Internet]. 2000 Oct [cited 2024 Oct 21];1(1):11–21. Available from:
https://www.nature.com/articles/35036035
2. Sanderson MJ, Charles AC, Boitano S, Dirksen ER. Mechanisms and function of intercellularOpen asset ↗AOG-Lab/CalciumInsightspdf-raw-page:20 lines:1-37Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 15 Sept 2026
Introduction: Photosynthesis is fundamental to agricultural productivity, but its relatively low light-to-biomass conversion efficiency represents an opportunity for enhancement. High-throughput phenotyping is crucial for unraveling the genetic basis of variation in photosynthetic activity. However, the heritability of chlorophyll fluorescence parameters measured during the day is often low as a result of high levels of variation introduced by environmental fluctuations. Methods: To address these limitations, we measured fluorescence phenotypes at night, leveraging natural dark adaptation to minimize environmental noise. Results: Night measurement significantly increased the heritability of fluorescence traits compared to daytime measurements, with the maximum quantum yield of photosystem II (Fv/Fm) showing an increase in heritability from 0.32 to 0.72. Genome-wide association studies (GWAS) conducted using three photosynthetic fluorescence traits measured at night across two growing seasons identified several significant single nucleotide polymorphisms (SNPs). Notably, two candidate genes near SNPs linked to multiple fluorescence traits, Zm00001eb271820 and Zm00001eb012130, have known roles in photosynthesis regulation. Four of the significant signal nucleotide polymorphisms identified in GWAS conducted using nighttime collected data also exhibited statistically significant associations with the same phenotypes during the day. In a majority of other cases, direction of effect was consistent but greater variance in day measured data relative to night measured data resulted in the differences not being statistically significant. Discussion: These results highlight the effectiveness of phenotyping photosynthetic traits at night in reducing environmental noise and enhancing the discovery of genomic intervals related to photosynthesis. While nighttime data collection may not be applicable for all photosynthetic traits, it offers a promising avenue for advancing our understanding of the genetic variation of photosynthesis in modern crop species.
Why it matches plant phenotyping methods夜間の蛍光測定による光合成形質フェノタイピングを開発・評価し、昼間測定との比較で環境変動低減と遺伝率向上を検証しているため、手法が研究の中心である。
abstractHigh-throughput phenotyping is crucial for unraveling the genetic basis of variation in photosynthetic activity.
Reproduction assets foundThe paper's fluorescence phenotype datasets and analysis outputs (trait QC cutoffs, BLUP/heritability model tables, GWAS significant SNP tables) are stated to be available via the article's online Supplementary Material hosted by Frontiers. No standalone author code repository or named data repository accession appearsSupplement · publicof their affiliated organizations, or those of the publisher, the editors and the reviewers. Any product that may be evaluated in this article, or claim that may be made by its manufacturer, is not guaranteed or endorsed by the publisher.
Supplementary material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2025.1595339/full#supplementary-material
References
Ali W. Grzybowski M. Torres-Rodríguez J. V. Li F. Shrestha N. Mathivanan R. K.
. ( 2024 ).
Quantitative genetics of photosynthetic trait variation in maize
. bioRxiv , eraf198 . doi:
10.1101/2024.11.25.625283
PMC12448886
40365812
Alter P. Dreissen A. Luo F.-L. MatsubaOpen asset ↗lines:613-651Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Chlorophyll fluorescenceLeafRootPhysiological trait estimationPhotosynthesis / fluorescenceWater status / transpiration
The invasive aquatic macrophyte Pontederia crassipes (water hyacinth) exhibits exceptional adaptability across a wide range of light environments, yet the mechanistic basis of its photosynthetic plasticity under both high- and low-light stress remains poorly resolved. This study integrated chlorophyll fluorescence and gas-exchange analyses to evaluate three photosynthetic models—rectangular hyperbola (RH), non-rectangular hyperbola (NRH), and the Ye mechanistic model—in capturing light-response dynamics in P. crassipes. The Ye model provided superior accuracy (R2 > 0.996) in simulating the net photosynthetic rate (Pn) and electron transport rate (J), outperforming empirical models that overestimated Pnmax by 36–46% and Jmax by 1.5–24.7% and failed to predict saturation light intensity. Mechanistic analysis revealed that P. crassipes maintains high photosynthetic efficiency in low light (LUEmax = 0.030 mol mol−1 at 200 µmol photons m−2 s−1) and robust photoprotection under strong light (NPQmax = 1.375, PSII efficiency decline), supported by a large photosynthetic pigment pool (9.46 × 1016 molecules m−2) and high eigen-absorption cross-section (1.91 × 10−21 m2). Unlike terrestrial plants, its floating leaves experience enhanced irradiance due to water-surface reflection and are decoupled from water limitation via submerged root uptake, enabling flexible stomatal and energy regulation. Distinct thresholds for carboxylation efficiency (CEmax = 0.085 mol m−2 s−1) and water-use efficiency (WUEi-max = 45.91 μmol mol−1 and WUEinst = 1.96 μmol mmol−1) highlighted its flexible energy management strategies. These results establish the Ye model as a reliable tool for characterizing aquatic photosynthesis and reveal how P. crassipes balances light harvesting and dissipation to thrive in fluctuating environments. These resulting insights have implications for both understanding invasiveness and managing eutrophic aquatic systems.
Why it matches plant phenotyping methods複数の光合成モデルを実測データで比較・検証し、植物の光合成生理形質を推定するモデルの精度と適用性を中心的に評価しているため。
abstractThis study integrated chlorophyll fluorescence and gas-exchange analyses to evaluate three photosynthetic models—rectangular hyperbola (RH), non-rectangular hyperbola (NRH), and the Ye mechanistic model—in capturing light-response dynamics in P. crassipes.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe following supporting information can be downloaded at https://www.mdpi.com/article/10.3390/biology14060600/s1 : Table S1. Gas-exchange measurement data.Open asset ↗lines:329-346Code / dataset availability confirmedCrossref · Europe PMC · checked 6 Sept 2026
Photosynthetic activity can be monitored using pulse amplitude modulated (PAM) fluorescence or gas exchange. While PAM provides insight into the light-dependent reactions, gas exchange reflects CO 2 fixation and water balance. Accurate, non-invasive prediction of photosynthetic performance under varying conditions is highly relevant for phenotyping and stress diagnostics. Despite their physiological link, data from both methods do not always correlate. To systematically investigate this relationship, photosynthetic parameters were measured in maize ( Zea mays , C4) and basil ( Ocimum basilicum , C3) under different photon densities and spectral compositions. Maize showed the highest CO 2 assimilation rate of 30.99 ± 1.54 µmol CO 2 /(m²s) under 2000 PAR green light (527 nm), while basil reached 10.56 ± 0.92 µmol CO 2 /(m²s) under red light (630 nm). PAM-derived electron transport rates (ETR) increased with light intensity in a pattern similar to CO 2 assimilation, but did not reliably reflect its absolute values under all conditions. To improve prediction accuracy, we applied a machine learning model. XGBoost, a gradient-boosted decision tree algorithm, efficiently captures nonlinear interactions between physiological and environmental parameters. It achieved superior performance (R² = 0.847; MSE = 5.24) compared to the Random Forest model. Our model enables accurate photosynthesis prediction from PAM data across light intensities and spectral conditions in both C3 and C4 plants.
Why it matches plant phenotyping methodsPAM蛍光データから光合成性能を推定する機械学習モデルを開発・比較評価しており、植物生理形質の取得・推定手法が研究の中心である。
abstractTo improve prediction accuracy, we applied a machine learning model.
Reproduction assets foundThe paper's data availability statement names a public GitHub repository (KlirS/Model-for-PAM-Fluorescence-Gas-Exchange-Correlation) hosting the study's datasets, which underpin the PAM fluorescence/gas-exchange measurements and the Random Forest/XGBoost analysis. The statement does not explicitly distinguish code vs. Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://github.com/KlirS/Model-for-PAM-Fluorescence-Gas-Exchange-CorrelationOpen asset ↗KlirS/Model-for-PAM-Fluorescence-Gas-Exchange-Correlationlines:486-500Code / dataset availability confirmedCrossref · Europe PMC · checked 6 Sept 2026
We show non-invasive 3D plant disease imaging using automated monocular vision-based structure from motion. We optimize the number of key points in an image pair by using a small angular step size and detection in the extra green channel. Furthermore, we upsample the images to increase the number of key points. With the same setup, we obtain functional fluorescence information that we map onto the 3D structural plant image, in this way obtaining a combined functional and 3D structural plant image using a single setup.
Why it matches plant phenotyping methods植物の3D構造と蛍光機能情報を取得・統合する画像計測手法の開発が中心であり、植物病害の非侵襲的フェノタイピングに該当します。
abstractWe show non-invasive 3D plant disease imaging using automated monocular vision-based structure from motion.
Reproduction assets foundThe paper's Data Availability Statement explicitly deposits the code and datasets for reproducing the SfM 3D plant imaging results in the 4TU repository, with a DOI matching an allowed URL.Code · publicThe code and data sets for reproducing the results are available in 4TU repository at https://doi.org/10.4121/e6db8707-10ee-4553-9a98-753f1b4c526a .Open asset ↗4TU repository · 10.4121/e6db8707-10ee-4553-9a98-753f1b4c526alines:52-127Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Published1 Mar 2025The Plant journal : for cell and molecular biologyCited by 6 · OpenAlex ↗
High lipid producing (HLP) tobacco (Nicotiana tabacum) is a potential biofuel crop that produces an excess of 30% dry weight as lipid bodies in the form of triacylglycerol. While using HLP tobacco as a sustainable fuel source is promising, it has not yet been tested for its tolerance to warmer environments that are expected in the near future as a result of climate change. We found that HLP tobacco had reduced stomatal conductance, which results in increased leaf temperatures up to 1.5°C higher under control and high temperature (38°C day/28°C night) conditions, reduced transpiration, and reduced CO 2 assimilation. We hypothesize this reduction in stomatal conductance is due to the presence of excessive, large lipid droplets in HLP guard cells imaged using confocal microscopy. High temperatures also significantly reduced total fatty acid levels by 55% in HLP plants; thus, additional engineering may be needed to maintain high titers of leaf oil under future climate conditions. High-throughput image analysis techniques using open-source image analysis platform PlantCV for thermal image analysis (plant temperature), stomata microscopy image analysis (stomatal conductance), and fluorescence image analysis (photosynthetic efficiency) were developed and applied in this study. A corresponding set of PlantCV tutorials are provided to enable similar studies focused on phenotyping future crops under adverse conditions.
Why it matches plant phenotyping methodsPlantCVを用いた熱画像・気孔顕微鏡画像・蛍光画像の高スループット解析手法を開発・適用し、植物温度、気孔関連指標、光合成効率を推定しているため、表現型取得手法が中心的です。
abstractHigh-throughput image analysis techniques using open-source image analysis platform PlantCV for thermal image analysis (plant temperature), stomata microscopy image analysis (stomatal conductance), and fluorescence image analysis (photosynthetic efficiency) were developed and applied in this study.
Reproduction assets foundThe paper's raw phenotyping image data (thermal, fluorescence, stomata, confocal microscopy) are deposited on Zenodo, and the authors' PlantCV analysis workflows and R scripts are on GitHub, including three PlantCV tutorials for thermal, stomata, and photosynthesis analysis.Dataset · publicaxial side of the leaf rather than a cross section. While small lipid droplets were present in the WT stomatal guard cells and epidermis, large lipid droplets were present in the HLP guard cells under both control and after 7 days of treatment (representative control images in Figure 8A–D , complete dataset available on Zenodo, https://zenodo.org/records/10711864 ). In addition, while HLP oil appeared to form spherical droplets, it did not “line” the stomatal opening as in WT (Figure 8C,D ).
Figure 8
High lipid producing (HLP) had excessive oil droplets in stomatal guard cells.
Representative confocal microscopy images, shown as focused Z‐stack, of tobacco leaf tissue fixed in paraformaOpen asset ↗Zenodolines:115-123Code · publicmated marginal means (LSMEANS) to determine which sample types were significantly different from others. Means are reported in text with standard error. Plots were made using ggplot2 package (v.3.5.0) in R. Jupyter notebooks associated with PlantCV analyses and R scripts associated with this manuscript are available on Github ( https://github.com/danforthcenter/tobacco‐heat‐paper ).
AUTHOR CONTRIBUTIONS
DKA, MAG, PDB, BSJ and KMM designed experiments. KMM and BSJ performed experiments and data analysis. KJC designed and aided KMM in confocal and brightfield microscopy experiments and advised TEM experiments. JW performed TEM experiments, and KG‐O and SK performed data analysis of TEM images.Open asset ↗GitHublines:171-182Code · publictification was used to isolate only individual plants in each mask. Then, the mask was applied to the registered thermal image to calculate the average plant temperature, as well as a histogram of pixel temperatures for each plant. A PlantCV workflow was used to analyze the images in parallel. A tutorial is available on GitHub: https://github.com/danforthcenter/plantcv‐tutorial‐thermal?tab=readme‐ov‐file (Acosta‐Gamboa et al., 2024 ). Scripts for this project are available at https://github.com/danforthcenter/tobacco‐heat‐paper . Raw image data are available on Zenodo, https://zenodo.org/records/10711864 .
Stomatal aperture measurements
To measure stomatal number and aperture, leaf impressioOpen asset ↗GitHublines:142-146Code · publicpackage was then used to calculate the number of stomata and the area of the aperture. A limitation of this method is that it does not provide the width and length of stomata, or measurements of the guard cells themselves; instead, it provides the aperture area (a result of length and width). A tutorial is available on GitHub: https://github.com/danforthcenter/plantcv‐stomata‐tutorial‐pcv4 (Murphy, 2024 ). Scripts for this project are available at https://github.com/danforthcenter/tobacco‐heat‐paper . Raw image data are available on Zenodo, https://zenodo.org/records/10711864 .
Photosynthesis and gas exchangeOpen asset ↗GitHublines:142-146Code · publicPlantCV (Gehan et al., 2017 ) using the photosynthesis package; the chlorophyll fluorescence image was used to mask the image for only plant pixels, and average F
v / F
m , F q ′ / F m ′ , NPQ, chlorophyll index, and anthocyanin index were calculated as an average per plant at each timepoint. A tutorial is available on GitHub: https://github.com/danforthcenter/plantcv‐tutorial‐photosynthesis?tab=readme‐ov‐file (Schuhl et al., 2024 ). Scripts for this project are available at https://github.com/danforthcenter/tobacco‐heat‐paper . Raw image data are available on Zenodo, https://zenodo.org/records/10711864 .
Microscopy imaging of lipids
Leaf samples analyzed for lipid content were taken from thOpen asset ↗GitHublines:156-164Code / dataset availability confirmedEurope PMC · checked 6 Sept 2026
A wide range of portable chlorophyll meters are increasingly being used to measure leaf chlorophyll content as an indicator of plant performance, providing reference data for remote sensing studies. We tested the effect of leaf anatomy on the relationship between optical assessments of chlorophyll (Chl) against biochemically determined Chl content as a reference. Optical Chl assessments included measurements taken by four chlorophyll meters: three transmittance-based (SPAD-502, Dualex-4 Scientific, and MultispeQ 2.0), one fluorescence-based (CCM-300), and vegetation indices calculated from the 400-2500 nm leaf reflectance acquired using an ASD FieldSpec and a contact plant probe. Three leaf types with different anatomy were included: dorsiventral laminar leaves, grass leaves, and needles. On laminar leaves, all instruments performed well for chlorophyll content estimation (R 2 > 0.80, nRMSE 2 > 0.90, nRMSE 2 = 0.45, nRMSE = 11%) and failed for SPAD. For Norway spruce needles, the relation of CCM-300 values to chlorophyll content was also weak (R 2 = 0.45, nRMSE = 11%). To improve the accuracy of data used for remote sensing algorithm development, we recommend calibration of chlorophyll meter measurements with biochemical assessments, especially for species with anatomy other than laminar dicot leaves. The take-home message is that portable chlorophyll meters perform well for laminar leaves and grasses with wider leaves, however, their accuracy is limited for conifer needles and narrow grass leaves. Species-specific calibrations are necessary to account for anatomical variations, and adjustments in sampling protocols may be required to improve measurement reliability.
Why it matches plant phenotyping methods携帯型クロロフィルメーターによる葉クロロフィル量推定を、葉の解剖学的差異と生化学測定を基準に比較・検証し、校正とサンプリング改善を提案しているため、植物表現型取得法が中心です。
abstractWe tested the effect of leaf anatomy on the relationship between optical assessments of chlorophyll (Chl) against biochemically determined Chl content as a reference.
Reproduction assets foundThe paper's Data availability statement explicitly deposits the study's chlorophyll measurement and trait data in a public Zenodo repository, which is an allowed URL. No separate author analysis code URL is given (analyses were in Matlab/R), so the qualifying asset is the deposited dataset.Dataset · publicData are available in Zenodo repository found by https://zenodo.org/records/14615430.Open asset ↗Zenodo · 14615430pdf-page:14 lines:1-62Code / dataset availability confirmedCrossref · checked 14 Sept 2026
The analysis of fast fluorescence kinetics, specifically through the JIP test, is a valuable tool for identifying and characterizing plant stress. However, interpreting OJIP data requires a comprehensive understanding of their underlying theory. This study proposes a Machine Learning-based approach using a One-Class Support Vector Machine anomaly detection model to effectively categorize OJIP measurements into “normal”, representing healthy plants, and “anomalies”. This approach was validated using a previously published dataset. A subgroup of the identified “anomalies” was clearly linked to stress-induced reductions in photosynthesis. Furthermore, the percentage of these “anomalies” showed a meaningful correlation with both the progression and severity of stress. The results highlight the still largely unexploited potential of Machine Learning in OJIP analysis.
Why it matches plant phenotyping methods植物の高速蛍光 kinetics（OJIP）からストレス状態を抽出する機械学習手法を開発し、既存データセットで検証しており、フェノタイピング手法が中心である。
abstractThis study proposes a Machine Learning-based approach using a One-Class Support Vector Machine anomaly detection model to effectively categorize OJIP measurements into “normal”, representing healthy plants, and “anomalies”.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicSupplementary Materials: The following supporting information can be downloaded at https://
www.mdpi.com/article/10.3390/stresses4040051/s1. All OJIP data used in the study can be found in
Supplementary data (OJIP data).xlsx.Open asset ↗stresses4040051pdf-page:12 lines:1-58Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Early stress detection of crops requires a thorough understanding of the signals showing the very first symptoms of the alterations in the photosynthetic light reactions. Detection of the activation of the regulated heat dissipation mechanism is crucial to complement passively induced fluorescence to resolve ambuiguities in energy partitioning. Using leaf spectroscopy, we evaluated the capability of pigment spectral unmixing to calculate the fluorescence quantum efficiency (FQE) and simultaneously retrieve fast absorption changes in a drought and nitrogen deficiency experiment with tomato. In addition, active fluorescence measurements and pigment analyses of xanthophylls, carotenes and chlorophylls were conducted. We observed notable responses in noninvasive proximal sensing-retrieved FQE values under stress, but as expected, these alone were not enough to identify the constraints in photosynthetic efficiency. Reflectance-based detection of the 535-nm peak absorption change was able to complement FQE and indicate the activation of regulated heat dissipation for both stress treatments under growing light conditions. However, further complexity in the light harvesting energy regulation needs to be accounted for when considering additional light stress. Our results underscore the potential of complementary in vivo quantitative spectroscopy-based products in the early and nondestructive stress diagnosis of plants, marking the path for further applications.
Why it matches plant phenotyping methods葉分光法とスペクトルアンミキシングにより、植物のFQEや熱散逸に関連する吸収変化を非破壊・定量的に取得し、ストレス診断への有効性を評価しているため、植物生理フェノタイピング手法の応用・評価が中心です。
abstractUsing leaf spectroscopy, we evaluated the capability of pigment spectral unmixing to calculate the fluorescence quantum efficiency (FQE) and simultaneously retrieve fast absorption changes in a drought and nitrogen deficiency experiment with tomato.
Reproduction assets foundThe article's Data Availability Statement explicitly deposits the paper's raw and processed phenotyping/spectroscopy measurements open access on Zenodo (doi: 10.5281/zenodo.12800064). This is a paper-specific, public, actionable dataset. However, the Zenodo URL is not among the allowed_urls, so no asset URL is providedDataset · publicData Availability Statement
Raw and processed data are available open access through the Zenodo repository (doi: 10.5281/zenodo.12800064 ).Zenodo · 10.5281/zenodo.12800064lines:539-574Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Recent research has shown that optimizing photosynthetic and stomatal traits holds promise for improved crop performance. However, standard phenotyping tools such as gas exchange systems have limited throughput. In this work, a novel approach based on a bespoke gas exchange chamber allowing combined measurement of the quantum yield of PSII (Fq'/Fm'), with an estimation of stomatal conductance via thermal imaging was used to phenotype a range of bread wheat (Triticum aestivum L.) genotypes. Using the dual-imaging methods and traditional approaches, we found broad and significant variation in key traits, including photosynthetic CO2 uptake at saturating light and ambient CO2 concentration (Asat), photosynthetic CO2 uptake at saturating light and elevated CO2 concentration (Amax), the maximum velocity of Rubisco for carboxylation (Vcmax), time for stomatal opening (Ki), and leaf evaporative cooling. Anatomical analysis revealed significant variation in flag leaf adaxial stomatal density. Associations between traits highlighted significant relationships between leaf evaporative cooling, leaf stomatal conductance, and Fq'/Fm', highlighting the importance of stomatal conductance and stomatal rapidity in maintaining optimal leaf temperature for photosynthesis in wheat. Additionally, gsmin and gsmax were positively associated, indicating that potential combinations of preferable traits (i.e. inherently high gsmax, low Ki, and maintained leaf evaporative cooling) are present in wheat. This work highlights the effectiveness of thermal imaging in screening dynamic gs in a panel of wheat genotypes. The wide phenotypic variation observed suggested the presence of exploitable genetic variability in bread wheat for dynamic stomatal conductance traits and photosynthetic capacity for targeted optimization within future breeding programmes.
Why it matches plant phenotyping methods特注ガス交換チャンバーと熱画像を組み合わせた動的な気孔コンダクタンス・光合成形質の取得手法を開発し、複数のコムギ遺伝子型で実証しているため、植物フェノタイピング手法が中心です。
abstracta novel approach based on a bespoke gas exchange chamber allowing combined measurement of the quantum yield of PSII (Fq'/Fm'), with an estimation of stomatal conductance via thermal imaging was used to phenotype a range of bread wheat (Triticum aestivum L.) genotypes.
Reproduction assets foundThe paper's Data Availability statement points to a public Dryad repository containing the raw phenotyping data (photosynthesis and stomatal kinetics measurements) for this study, matching an allowed URL. Supplementary datasets S1–S2 are calculation spreadsheets but no standalone public URL is given for them beyond theDataset · publicRaw data can be accessed from the Dryad Digital Repository ( Faralli et al. , 2024 ) ( https://doi.org/10.5061/dryad.79cnp5j4d ).Open asset ↗Dryad Digital Repository · 10.5061/dryad.79cnp5j4dlines:117-171Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Kelps are vital for marine ecosystems, yet the genetic diversity underlying their capacity to adapt to climate change remains unknown. In this study, we focused on the kelp Macrocystis pyrifera a species critical to coastal habitats. We developed a protocol to evaluate heat stress response in 204 Macrocystis pyrifera genotypes subjected to heat stress treatments ranging from 21 °C to 27 °C. Here we show that haploid gametophytes exhibiting a heat-stress tolerant (HST) phenotype also produced greater biomass as genetically similar diploid sporophytes in a warm-water ocean farm. HST was measured as chlorophyll autofluorescence per genotype, presented here as fluorescent intensity values. This correlation suggests a predictive relationship between the growth performance of the early microscopic gametophyte stage HST and the later macroscopic sporophyte stage, indicating the potential for selecting resilient kelp strains under warmer ocean temperatures. However, HST kelps showed reduced genetic variation, underscoring the importance of integrating heat tolerance genes into a broader genetic pool to maintain the adaptability of kelp populations in the face of climate change.
Why it matches plant phenotyping methods熱ストレス耐性という植物状態をクロロフィル自家蛍光で定量するプロトコルを開発しており、表現型取得法が研究の中心的要素として明示されている。
abstractWe developed a protocol to evaluate heat stress response in 204 Macrocystis pyrifera genotypes subjected to heat stress treatments ranging from 21 °C to 27 °C.
Reproduction assets foundThe authors publicly deposited both the analysis scripts and the numerical source data (including raw fluorescence intensity values underlying the heat-stress phenotyping) in a Zenodo repository, with explicit availability statements and URLs in the Data availability and Code availability sections.Code · publicAll scripts used in this study are available in a Zenodo repository at https://doi.org/10.5281/zenodo.13315681 .Open asset ↗Zenodo · 10.5281/zenodo.13315681lines:168-242Dataset · publicNumerical source data for the graph presented in Figs. 1 – 3 , and Fig. 5 can be found in the Zenodo repository here: https://doi.org/10.5281/zenodo.13315681 .Open asset ↗Zenodo · 10.5281/zenodo.13315681lines:148-167Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Chlorophyll fluorescence is a well-established method to estimate chlorophyll content in leaves. A popular fluorescence-based meter, the Opti-Sciences CCM-300 Chlorophyll Content Meter (CCM-300), utilizes the fluorescence ratio F735/F700 and equations derived from experiments using broadleaf species to provide a direct, rapid estimate of chlorophyll content used for many applications. We sought to quantify the performance of the CCM-300 relative to more intensive methods, both across plant functional types and years of use. We linked CCM-300 measurements of broadleaf, conifer, and graminoid samples in 2018 and 2019 to high-performance liquid chromatography (HPLC) and/or spectrophotometric (Spec) analysis of the same leaves. We observed a significant difference between the CCM-300 and HPLC/Spec, but not between HPLC and Spec. In comparison to HPLC, the CCM-300 performed better for broadleaves (r = 0.55, RMSE = 154.76) than conifers (r = 0.52, RMSE = 171.16) and graminoids (r = 0.32, RMSE = 127.12). We observed a slight deterioration in meter performance between years, potentially due to meter calibration. Our results show that the CCM-300 is reliable to demonstrate coarse variations in chlorophyll but may be limited for cross-plant functional type studies and comparisons across years.
Why it matches plant phenotyping methodsCCM-300による葉のクロロフィル含量測定法を、HPLCおよび分光測定と比較して信頼性・校正性能を検証しており、植物表現型取得法が研究の中心である。
abstractWe sought to quantify the performance of the CCM-300 relative to more intensive methods, both across plant functional types and years of use.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/s24154784/s1 , Figure S1: HPLC measurements from the UW-Madison dataset ( n = 26).Open asset ↗lines:262-279Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 7 Sept 2026
Background Autofluorescence-based imaging has the potential to non-destructively characterize the biochemical and physiological properties of plants regulated by genotypes using optical properties of the tissue. A comparative study of stress tolerant and stress susceptible genotypes of Brassica rapa with respect to newly introduced stress-based phenotypes using machine learning techniques will contribute to the significant advancement of autofluorescence-based plant phenotyping research. Methods Autofluorescence spectral images have been used to design a stress detection classifier with two classes, stressed and non-stressed, using machine learning algorithms. The benchmark dataset consisted of time-series image sequences from three Brassica rapa genotypes (CC, R500, and VT), extreme in their morphological and physiological traits captured at the high-throughput plant phenotyping facility at the University of Nebraska-Lincoln, USA. We developed a set of machine learning-based classification models to detect the percentage of stressed tissue derived from plant images and identified the best classifier. From the analysis of the autofluorescence images, two novel stress-based image phenotypes were computed to determine the temporal variation in stressed tissue under progressive drought across different genotypes, i.e., the average percentage stress and the moving average percentage stress. Results The study demonstrated that both the computed phenotypes consistently discriminated against stressed versus non-stressed tissue, with oilseed type (R500) being less prone to drought stress relative to the other two Brassica rapa genotypes (CC and VT). Conclusion Autofluorescence signals from the 365/400 nm excitation/emission combination were able to segregate genotypic variation during a progressive drought treatment under a controlled greenhouse environment, allowing for the exploration of other meaningful phenotypes using autofluorescence image sequences with significance in the context of plant science.
Why it matches plant phenotyping methods自家蛍光画像と機械学習により植物のストレス組織割合を抽出し、新規な時系列ストレス表現型を算出する方法が研究の中心である。
abstractWe developed a set of machine learning-based classification models to detect the percentage of stressed tissue derived from plant images and identified the best classifier.
Reproduction assets foundThe paper's autofluorescence image dataset (UNL-UW-AFD, 3360 images of three Brassica rapa genotypes) is explicitly stated to be publicly available for download at the authors' URL. No author analysis code with a public URL is stated.Dataset · publicwe built and made publicly available Autofluorescence Dataset collaboratively developed by the University of Nebraska–Lincoln and the University of Wyoming (UNL-UW-AFD) as a benchmark dataset, at https://plantvision.unl.edu/dataset . The dataset consists of 3360 autofluorescence images captured for three genotypes, i.e., R500 , CC , and VT .Open asset ↗plantvision.unl.edu · UNL-UW-AFDlines:339-346Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Photosynthesis is influenced by dynamic energy allocation under various environmental conditions. Solar-induced chlorophyll fluorescence (SIF), an important pathway for dissipating absorbed energy, has been extensively used to evaluate gross primary productivity (GPP). However, the potential for photochemical reflectance index (PRI), as an indicator of non-photochemical quenching (NPQ), to improve the SIF-based GPP estimation, has not been thoroughly investigated. In this study, using continually tower-based observations, we examined how PRI affected the link between SIF and GPP for corn and soybean at half-hourly and daily timescales. The relationship of GPP to SIF and PRI is impacted by stress indicated by vapor pressure deficit (VPD) and crop water stress index (CWSI). Moreover, the ratio of GPP to SIF of corn was more sensitive to PRI compared to soybean. Whether in Pearson or Partial correlation analysis, the relationships of PRI to the ratio of GPP to SIF were almost all significant, regardless of controlling structural-physiological (stomatal conductance, vegetation indices) and environmental variables (light intensity, etc.). Therefore, PRI significantly affects the SIF–GPP relationship for corn (r > 0.31, p 0.22, p
Why it matches plant phenotyping methods作物を対象に、塔載観測によるPRI・SIFを用いたGPP推定関係の改善と検証を主題としており、植物の生理状態推定手法が中心である。
titleAssessing the Potential for Photochemical Reflectance Index to Improve the Relationship between Solar-Induced Chlorophyll Fluorescence and Gross Primary Productivity in Crop and Soybean
Reproduction assets foundThe paper's tower-based SIF, PRI, and GPP measurements for corn and soybean at US-Ne2/US-Ne3 derive from an openly downloadable ORNL DAAC dataset (ds_id=2136), explicitly cited in the Data Availability Statement. No author analysis code or models are disclosed.Dataset · publicResearch and Development Program of
China, grant number 2021YFC2600501; the National Natural Science Foundation of China, grant
number SKLNBC2023-01.
Institutional Review Board Statement: Not applicable.
Informed Consent Statement: Not applicable.
Data Availability Statement: The dataset used in this study can be downloaded at https://daac.ornl.gov/cgi-bin/dsviewer.pl?ds_id=2136 (accessed on 1 January 2024).
Acknowledgments: We appreciate the open-access dataset supported by Wu from the Agroecosystem
Sustainability Center, Institute for Sustainability, Energy, and Environment, University of Illinois at
Urbana-Champaign, Urbana, IL, USA.
Conflicts of Interest: The authors declare no conflictsOpen asset ↗daac.ornl.gov · ds_id=2136pdf-raw-page:17 lines:1-54Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Abstract Projected increases in food demand driven by population growth coupled with heightened agricultural vulnerability to climate change jointly pose severe threats to global food security in the coming decades, especially for developing nations. By providing real-time and low-cost observations, satellite remote sensing has been widely employed to estimate crop yield across various scales. Most such efforts are based on statistical approaches that require large amounts of ground measurements for model training/calibration, which may be challenging to obtain on a large scale in developing countries that are most food-insecure and climate-vulnerable. In this paper, we develop a generalizable framework that is mechanism-guided and practically parsimonious for crop yield estimation. We then apply this framework to estimate crop yield for two crops (corn and wheat) in two contrasting regions, the US Corn Belt US-CB, and India’s Indo–Gangetic plain Wheat Belt IGP-WB, respectively. This framework is based on the mechanistic light reactions (MLR) model utilizing remotely sensed solar-induced chlorophyll fluorescence (SIF) as a major input. We compared the performance of MLR to two commonly used machine learning (ML) algorithms: artificial neural network and random forest. We found that MLR-SIF has comparable performance to ML algorithms in US-CB, where abundant and high-quality ground measurements of crop yield are routinely available (for model calibration). In IGP-WB, MLR-SIF significantly outperforms ML algorithms. These results demonstrate the potential advantage of MLR-SIF for yield estimation in developing countries where ground truth data is limited in quantity and quality. In addition, high-resolution and crop-specific satellite SIF is crucial for accurate yield estimation. Therefore, harnessing the mechanism-guided MLR-SIF and rapidly growing satellite SIF measurements (with high resolution and crop-specificity) hold promise to enhance food security in developing countries towards more effective responses to food crises, agricultural policies, and more efficient commodity pricing.
Why it matches plant phenotyping methods衛星SIFを用いて作物収量という植物形質を推定する機構ガイド型フレームワークを開発し、複数地域・機械学習手法と比較検証しており、形質取得・推定法が中心である。
titleA scalable crop yield estimation framework based on remote sensing of solar-induced chlorophyll fluorescence (SIF)
Reproduction assets foundThe paper's yield estimation analysis relies on publicly available datasets explicitly named in the data availability statement: the OCO-2 SIF product (SIF_oco2_005) at ORNL DAAC, USDA NASS QuickStats corn yields, and ICRISAT DLD wheat yields. No author code, models, or paper-specific image/annotation assets are sharedDataset · public2 SIF available
from previous work (details below). Yield estimation
in US-CB was conducted for five years from 2015
to 2020 (when corn-specific OCO-2 SIF is available)
except 2017 (when OCO-2 had an instrument fail-
ure in August). The district-level wheat yield in IGP-
WB came from the District Level Database (DLD)
for India (http://data.icrisat.org/dld/), including 55
districts for the states of Bihar, Uttar Pradesh, and
Haryana. Yield estimation in IGP-WB was carried out
from 2015 to 2017 (the maximum overlap between
OCO-2 SIF and yield data).
2.2. The MLR-SIF yield estimation framework
The MLR-SIF based framework for yield estimation
consists of three steps. First, it estimaOpen asset ↗pdf-raw-page:4 lines:1-131Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Most plant thermal tolerance studies focus on single critical thresholds, which limit the capacity to generalise across studies and predict heat stress under natural conditions. In animals and microbes, thermal tolerance landscapes describe the more realistic, cumulative effects of temperature. We tested this in plants by measuring the decline in leaf photosynthetic efficiency (F V /F M ) following a combination of temperatures and exposure times and then modelled these physiological indices alongside recorded environmental temperatures. We demonstrate that a general relationship between stressful temperatures and exposure durations can be effectively employed to quantify and compare heat tolerance within and across plant species and over time. Importantly, we show how F V /F M curves translate to plants under natural conditions, suggesting that environmental temperatures often impair photosynthetic function. Our findings provide more robust descriptors of heat tolerance in plants and suggest that heat tolerance in disparate groups of organisms can be studied with a single predictive framework.
Why it matches plant phenotyping methods植物の熱耐性を、温度と曝露時間の累積効果および葉の光合成効率から定量・比較する予測フレームワークが研究の中心であり、植物生理状態のフェノタイピング手法に該当する。
abstractWe demonstrate that a general relationship between stressful temperatures and exposure durations can be effectively employed to quantify and compare heat tolerance within and across plant species and over time.
Reproduction assets foundThe article's Data Availability Statement explicitly deposits the authors' R scripts and datasets (including the FV/FM heat-tolerance measurements and analysis data) at the Dryad Digital Repository with a public DOI, making this a paper-specific, publicly actionable asset.Dataset · publicProgram Scholarship; University of
Technology.
PEER REVIEW
The peer review history for this article is available at
https://www.webofscience.com/api/gateway/wos/peer-re-view/10.1111/ele.14416.DATA AVAILABILITY STATEMENT
The R scripts and datasets used to conduct the data
analyses are available at the DRYAD Digital Repository
(https://doi.org/10.5061/dryad.wdbrv15v4).ORCID
Alicia M. Cook https://orcid.org/0000-0003-3594-3220
Enrico L. Rezende https://orcid.org/0000-0002-6245-9605
Katherina Petrou https://orcid.org/0000-0002-2703-0694
Andy Leigh https://orcid.org/0000-0003-3568-2606
REFERENCES
AGBoM. (2018a) Climate statistics for Australian Locations: Port
Augusta AERO. Available at: http:Open asset ↗DRYAD Digital Repository · 10.5061/dryad.wdbrv15v4pdf-raw-page:10 lines:1-102Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Sun-induced chlorophyll fluorescence (SIF) provides an opportunity to study terrestrial ecosystem photosynthesis dynamics. However, the current coarse spatiotemporal satellite SIF products are challenging for mechanistic interpretations of SIF signals. Long-term ground SIF and vegetation indices (VIs) are important for satellite SIF validation and mechanistic understanding of the relationship between SIF and photosynthesis when combined with leaf- and canopy-level auxiliary measurements. In this study, we present and analyze a total of 15 site-years of ground far-red SIF (SIF at 760 nm, SIF 760 ) and VIs datasets from soybean, corn, and miscanthus grown in the U.S. Corn Belt from 2016 to 2021. We introduce a comprehensive data processing protocol, including different retrieval methods, calibration coefficient adjustment, and nadir SIF footprint upscaling to match the eddy covariance footprint. This long-term ground far-red SIF and VIs dataset provides important and first-hand data for far-red SIF interpretation and understanding the mechanistic relationship between far-red SIF and canopy photosynthesis across various crop species and environmental conditions.
Why it matches plant phenotyping methods作物キャノピーの光合成状態を推定する地上SIFについて、取得データセットと処理・校正・フットプリント拡大プロトコルが中心的に提示されており、植物フェノタイピング手法およびデータセットに該当する。
abstractWe introduce a comprehensive data processing protocol, including different retrieval methods, calibration coefficient adjustment, and nadir SIF footprint upscaling to match the eddy covariance footprint.
Reproduction assets foundThe paper's ground far-red SIF760 and vegetation indices dataset (15 site-years, US Corn Belt) is explicitly deposited in a public repository (ORNL DAAC) with a DOI matching an allowed URL.Dataset · publicThe processed half-hourly
SIF760 and VIs are available at the on Oak Ridge National Laboratory Distributed Active Archive Center (ORNL
DAAC) data repository https://doi.org/10.3334/ORNLDAAC/213653.Open asset ↗10.3334/ORNLDAAC/213653pdf-page:4 lines:1-47Code / dataset availability confirmedEurope PMC · checked 7 Sept 2026
Photosynthesis drives plant physiology, biomass accumulation, and yield. Photosynthetic efficiency, specifically the operating efficiency of PSII (Fq'/Fm'), is highly responsive to actual growth conditions, especially to fluctuating photosynthetic photon fluence rate (PPFR). Under field conditions, plants constantly balance energy uptake to optimize growth. The dynamic regulation complicates the quantification of cumulative photochemical energy uptake based on the intercepted solar energy, its transduction into biomass, and the identification of efficient breeding lines. Here, we show significant effects on biomass related to genetic variation in photosynthetic efficiency of 178 climbing bean (Phaseolus vulgaris L.) lines. Under fluctuating conditions, the Fq'/Fm' was monitored throughout the growing period using hand-held and automated chlorophyll fluorescence phenotyping. The seasonal response of Fq'/Fm' to PPFR (ResponseG:PPFR) achieved significant correlations with biomass and yield, ranging from 0.33 to 0.35 and from 0.22 to 0.31 in two glasshouse and three field trials, respectively. Phenomic yield prediction outperformed genomic predictions for new environments in four trials under different growing conditions. Investigating genetic control over photosynthesis, one single nucleotide polymorphism (Chr09_37766289_13052) on chromosome 9 was significantly associated with ResponseG:PPFR in proximity to a candidate gene controlling chloroplast thylakoid formation. In conclusion, photosynthetic screening facilitates and accelerates selection for high yield potential.
Why it matches plant phenotyping methods携帯型および自動クロロフィル蛍光フェノタイピングによる光合成効率の反復測定と、収量予測への技術適用が研究の中心であるため。
abstractUnder fluctuating conditions, the Fq'/Fm' was monitored throughout the growing period using hand-held and automated chlorophyll fluorescence phenotyping.
Reproduction assets foundThe paper's field MultispeQ chlorophyll fluorescence phenotyping data (Fq'/Fm' with PPFR and environmental covariates for the Dar18B, Dar19B, and Pal19D trials) are publicly available on the PhotosynQ platform via three author-provided project URLs. Glasshouse ChlF/biomass data are only in supplementary files without aDataset · publicThe MultispeQ data are also available on the PhotosynQ data base after creating an account (Darién 2018: https://photosynq.org/projects/climbers-in-darien-2018Open asset ↗PhotosynQ · climbers-in-darien-2018lines:374-422Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 15 Sept 2026
BACKGROUND: The study of plant photosynthesis is essential for productivity and yield. Thanks to the development of high-throughput phenotyping (HTP) facilities, based on chlorophyll fluorescence imaging, photosynthetic traits can be measured in a reliable, reproducible and efficient manner. In most state-of-the-art HTP platforms, these traits are automatedly analyzed at individual plant level, but information at leaf level is often restricted by the use of manual annotation. Automated leaf tracking over time is therefore highly desired. Methods for tracking individual leaves are still uncommon, convoluted, or require large datasets. Hence, applications and libraries with different techniques are required. New phenotyping platforms are initiated now more frequently than ever; however, the application of advanced computer vision techniques, such as convolutional neural networks, is still growing at a slow pace. Here, we provide a method for leaf segmentation and tracking through the fine-tuning of Mask R-CNN and intersection over union as a solution for leaf tracking on top-down images of plants. We also provide datasets and code for training and testing on both detection and tracking of individual leaves, aiming to stimulate the community to expand the current methodologies on this topic. RESULTS: We tested the results for detection and segmentation on 523 Arabidopsis thaliana leaves at three different stages of development from which we obtained a mean F-score of 0.956 on detection and 0.844 on segmentation overlap through the intersection over union (IoU). On the tracking side, we tested nine different plants with 191 leaves. A total of 161 leaves were tracked without issues, accounting to a total of 84.29% correct tracking, and a Higher Order Tracking Accuracy (HOTA) of 0.846. In our case study, leaf age and leaf order influenced photosynthetic capacity and photosynthetic response to light treatments. Leaf-dependent photosynthesis varies according to the genetic background. CONCLUSION: The method provided is robust for leaf tracking on top-down images. Although one of the strong components of the method is the low requirement in training data to achieve a good base result (based on fine-tuning), most of the tracking issues found could be solved by expanding the training dataset for the Mask R-CNN model.
Why it matches plant phenotyping methodsCNNによる葉のセグメンテーション・追跡手法を開発し、検出・追跡精度を検証した植物フェノタイピング研究である。
abstractHere, we provide a method for leaf segmentation and tracking through the fine-tuning of Mask R-CNN and intersection over union as a solution for leaf tracking on top-down images of plants.
Reproduction assets foundThe paper's authors explicitly state that the full project library (leaf detection/tracking code and dataset) is available as a public GitHub repository, which directly reproduces this paper's phenotyping analysis.Code · publicof the PyTorch-Vision GitHub repository was used for the model training, specifically the reference scripts found in the folder detection. These scripts are included in the project GitHub under the modelTraining folder without relevant modifications. The full library of this project is available as a public repository at GitHub https://github.com/Fedjurrui/Leaf-Tracking .
Declarations
Ethics approval and consent to participate
Not applicable.
Consent for publication
Not applicable.
Competing interests
No competing interests declared.
References
1.Open asset ↗Fedjurrui/Leaf-Trackinglines:174-269Code / dataset availability confirmedOpenAlex · checked 15 Sept 2026
Published1 Jan 2024IEEE Transactions on Geoscience and Remote SensingCited by 1 · OpenAlex ↗
Full-spectrum Sun-induced chlorophyll fluorescence (SIF) offers profound physiological insights into plant functional status compared to single-band SIF. We propose a Fourier series-based method (FSM) for retrieving full-spectrum SIF, aiming to address the limitations of existing methods, such as reliance on reflectance training datasets and the limited spectral range of retrieved SIF spectrum. The core principle of the FSM involves modeling reflectance as a wavelength-dependent function, which can be approximated by successive summations using high-order expansions of the Fourier series. The performance of the FSM was thoroughly evaluated through a combination of simulations and field measurements. The findings illustrate FSM’s capability to achieve high-precision full-spectrum SIF retrieval, with an average relative root-mean-square error (RRMSE) of 2.468% based on synthetic data. Moreover, the corresponding RRMSE values in the O2-A and O2-B bands, at 1.1% and 3.724%, respectively, indicate accuracy comparable to the spectral fitting method (SFM) and advanced FSR (aFSR) methods and superior to the SpecFit method. In the field full-spectrum SIF retrieval, FSM exhibited improved reflectance reconstruction and produced more reasonable results for the diurnal variation of full-spectrum SIF. The diurnal comparison of single-band SIF at both Italian and German sites further highlights the close alignment between FSM-retrieved SIF and the SFM SIF, with$R^{2}$values exceeding 0.96 and a maximum RMSE of 0.118 mW/m2/sr/nm. Conversely, the aFSR method encountered challenges stemming from an under-representation of the training dataset, resulting in the maximum RMSE at the Italian site reaching 0.506 mW/m2/sr/nm, along with a minimum$R^{2}$of 0.809. The FSM demonstrates the promising potential for full-spectrum SIF retrieval, accompanied by fewer limitations.
Why it matches plant phenotyping methods植物キャノピー計測から葉緑素蛍光を抽出する新規手法を開発し、シミュレーションと圃場計測で精度検証・既存法比較を行っており、植物生理状態のフェノタイピング手法が中心である。
abstractWe propose a Fourier series-based method (FSM) for retrieving full-spectrum SIF
Reproduction assets foundThe paper's FloX field spectral measurements (canopy upwelling radiance and apparent reflectance from Grosseto, Italy and Julich, Germany) are explicitly stated to be publicly available on Zenodo, matching the allowed URL. No author analysis code or trained model deposit is mentioned.Dataset · publicp (sparse vegetation), with observation heights of 1.5
121
m and 3 m, respectively. For this study, we used six sets of clear-sky observations
122
conducted on April 7, 16, and 25, 2018, in Italy, and on November 5, 7, and 18, 2020,
123
in Germany. These spectral datasets are already available on the shared online platform
124
(https://zenodo.org/records/7040578). For a more detailed description, please refer to
125
the work by Naethe, Julitta [17].
126
Figure 1 illustrates the diurnal measurements of upwelling radiance and apparent
127
reflectance recorded over the course of six days. The Italian measurements (upper two
128
rows) depict the vigorous growth period of the target vegetatOpen asset ↗zenodo · 7040578pdf-raw-page:6 lines:1-53Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Salt stress is considered one of the primary threats to cotton production. Although cotton is found to have reasonable salt tolerance, it is sensitive to salt stress during the seedling stage. This research aimed to propose an effective method for rapidly detecting salt stress of cotton seedlings using multicolor fluorescence-multispectral reflectance imaging coupled with deep learning. A prototyping platform that can obtain multicolor fluorescence and multispectral reflectance images synchronously was developed to get different characteristics of each cotton seedling. The experiments revealed that salt stress harmed cotton seedlings with an increase in malondialdehyde and a decrease in chlorophyll content, superoxide dismutase, and catalase after 17 days of salt stress. The Relief algorithm and principal component analysis were introduced to reduce data dimension with the first 9 principal component images (PC1 to PC9) accounting for 95.2% of the original variations. An optimized EfficientNet-B2 (EfficientNet-OB2), purposely used for a fixed resource budget, was established to detect salt stress by optimizing a proportional number of convolution kernels assigned to the first convolution according to the corresponding contributions of PC1 to PC9 images. EfficientNet-OB2 achieved an accuracy of 84.80%, 91.18%, and 95.10% for 5, 10, and 17 days of salt stress, respectively, which outperformed EfficientNet-B2 and EfficientNet-OB4 with higher training speed and fewer parameters. The results demonstrate the potential of combining multicolor fluorescence-multispectral reflectance imaging with the deep learning model EfficientNet-OB2 for salt stress detection of cotton at the seedling stage, which can be further deployed in mobile platforms for high-throughput screening in the field.
Why it matches plant phenotyping methods綿実生の塩ストレス状態を画像から検出する撮像プラットフォームと深層学習手法を開発しており、植物状態の取得・抽出が研究の中心である。
abstractThis research aimed to propose an effective method for rapidly detecting salt stress of cotton seedlings using multicolor fluorescence-multispectral reflectance imaging coupled with deep learning.
Reproduction assets foundThe paper's Data Availability statement explicitly deposits the authors' EfficientNet-OB2 code and training script on GitHub at the allowed URL. No public phenotype/image dataset is stated.Code · publication and technical support for the project. H.W., B.Z., and D.Y. provided suggestions on the experiment design and discussion sections.
Competing interests: The authors declare that they have no competing interests.
Data Availability
The code and training script of EfficientNet-OB2 has been hosted to GitHub and is available at https://github.com/foddcus/EfficientNetOB .
Supplementary Materials
Supplementary 1
Figs. S1 and S2
Tables S1 and S2
Click here for additional data file.
References
1. Noreen S, Ahmad S, Fatima Z, Zakir I, Iqbal P, Nahar K, Hasanuzzaman M. Abiotic stresses mediated changes in morphophysiology of cotton plant. In: Ahmad S, Hasanuzzaman M, editors. Cotton production andOpen asset ↗foddcus/EfficientNetOBlines:363-403Code / dataset availability confirmedOpenAlex · Europe PMC · Crossref · checked 15 Sept 2026
Cosegmentation and coattention are extensions of traditional segmentation methods aimed at detecting a common object (or objects) in a group of images. Current cosegmentation and coattention methods are ineffective for objects, such as plants, that change their morphological state while being captured in different modalities and views. The Object State Change using Coattention-Cosegmentation (OSC-CO2) is an end-to-end unsupervised deep-learning framework that enhances traditional segmentation techniques, processing, analyzing, selecting, and combining suitable segmentation results that may contain most of our target object’s pixels, and then displaying a final segmented image. The framework leverages coattention-based convolutional neural networks (CNNs) and cosegmentation-based dense Conditional Random Fields (CRFs) to address segmentation accuracy in high-dimensional plant imagery with evolving plant objects. The efficacy of OSC-CO2 is demonstrated using plant growth sequences imaged with infrared, visible, and fluorescence cameras in multiple views using a remote sensing, high-throughput phenotyping platform, and is evaluated using Jaccard index and precision measures. We also introduce CosegPP+, a dataset that is structured and can provide quantitative information on the efficacy of our framework. Results show that OSC-CO2 out performed state-of-the art segmentation and cosegmentation methods by improving segementation accuracy by 3% to 45%.
Why it matches plant phenotyping methods植物画像から成長状態を抽出する画像セグメンテーション手法を開発し、ハイスループット表現型解析プラットフォームで評価しているため、方法が研究の中心である。
abstractThe Object State Change using Coattention-Cosegmentation (OSC-CO2) is an end-to-end unsupervised deep-learning framework
Reproduction assets foundThe paper's authors publicly released both their analysis code (OSC-CO2 framework on GitHub) and the paper-specific plant phenotyping image dataset (CosegPP+, a VSTEM plant imagery dataset from the UNL LemnaTec platform) with explicit availability statements and URLs.Code · publicthe object’s (plant’s) shape, orientation, and size at a specific point in time. OSC-CO 2 is designed to process datasets that contain a variety of features, such as perspective (V), species (S), temporality (T), environmental conditions (E) and modality (M) (VSTEM) (
Figure 1
). The code for OSC-CO 2 is publicly available at: https://github.com/rubiquinones/OSC-CO2 .
Figure 1
A preview of a VSTEM Dataset. This work will use the CosegPP dataset ( Quiñones et al., 2021 ) and modify it as CosegPP+ and categorize it as a VSTEM dataset for our problem definition. The first row shows the growth sequence of a Buckwheat plant from 3 rd July 2019 to 27 th July 2019. The second row shows the threeOpen asset ↗rubiquinones/OSC-CO2lines:37-49Dataset · publicasets through segmentation using Otsu’s method ( Otsu, 1979 ) and cosegmentation using Subdiscover ( Meng et al., 2016 ). These two methods were chosen since ( Quiñones et al., 2021 ) defined these as the top methods for being able to segment some of the challenging features of computer vision. CosegPP+ is publicly available at https://doi.org/10.5281/zenodo.6863013 .
We replaced the original images with the outputs generated by Otsu’s method and Subdiscover. Meaning that each time point
i
will have at most
a
binary images where
a
is the number of algorithms (i.e., Otsu’s method and Subdiscover) used. Some groups do not contain Subdiscover binary masks due to the method’s limitation in notOpen asset ↗10.5281/zenodo.6863013lines:350-411Code / dataset availability confirmedOpenAlex · checked 14 Sept 2026
Abstract Aims Our understanding of the rhizosphere is limited by the lack of techniques for in situ live microscopy. Current techniques are either destructive or unsuitable for observing chemical changes within the pore space. To address this limitation, we have developed artificial substrates, termed smart soils, that enable the acquisition and 3D reconstruction of chemical sensors attached to soil particles. Methods The transparency of smart soils was achieved using polymer particles with refractive index matching that of water. The surface of the particles was modified both to retain water and act as a local sensor to report on pore space pH via fluorescence emissions. Multispectral signals were acquired from the particles using a light sheet microscope, and machine learning algorithms predicted the changes and spatial distribution in pH at the surface of the smart soil particles. Results The technique was able to predict pH live and in situ within ± 0.5 units of the true pH value. pH distribution could be reconstructed across a volume of several cubic centimetres around plant roots at 10 μm resolution. Using smart soils of different composition, we revealed how root exudation and pore structure create variability in chemical properties. Conclusion Smart soils captured the pH gradients forming around a growing plant root. Future developments of the technology could include the fine tuning of soil physicochemical properties, the addition of chemical sensors and improved data processing. Hence, this technology could play a critical role in advancing our understanding of complex rhizosphere processes.
Why it matches plant phenotyping methods植物根圏のpHを生体根周辺で測定・3D再構成するセンサー基盤を開発し、精度検証まで行っており、植物状態の取得方法が研究の中心である。
abstractwe have developed artificial substrates, termed smart soils, that enable the acquisition and 3D reconstruction of chemical sensors attached to soil particles.
Reproduction assets foundThe paper's Data availability statement explicitly releases the authors' software for predicting pH from light-sheet image data (the machine-learning phenotyping analysis) on the authors' public GitHub repository SENSOIL. No separate phenotype/trait dataset or image deposit is stated; supplementary material is only a 'Code · public102 Plant Soil (2024) 500:91–104
1 3
Vol:. (1234567890)
Data availability Software developped for predicting pH
from image data is available at https://github.com/LionelDu-puy/SENSOIL/tree/main/pH_Release.Declarations
Competing interest There is no competing interest.
Open Access This article is licensed under a Creative
Commons Attribution 4.0 International License, which per-
mits use, sharing, adaptation, distribution and reproduction in
any medium or format, as long as you give appropriate credit
to the original author(s) and the source,Open asset ↗SENSOILpdf-raw-page:12 lines:1-92Code / dataset availability confirmedEurope PMC · Crossref · checked 14 Sept 2026
Background The current development of sensor technologies towards ever more cost-effective and powerful systems is steadily increasing the application of low-cost sensors in different horticultural sectors. In plant in vitro culture, as a fundamental technique for plant breeding and plant propagation, the majority of evaluation methods to describe the performance of these cultures are based on destructive approaches, limiting data to unique endpoint measurements. Therefore, a non-destructive phenotyping system capable of automated, continuous and objective quantification of in vitro plant traits is desirable. Results An automated low-cost multi-sensor system acquiring phenotypic data of plant in vitro cultures was developed and evaluated. Unique hardware and software components were selected to construct a xyz-scanning system with an adequate accuracy for consistent data acquisition. Relevant plant growth predictors, such as projected area of explants and average canopy height were determined employing multi-sensory imaging and various developmental processes could be monitored and documented. The validation of the RGB image segmentation pipeline using a random forest classifier revealed very strong correlation with manual pixel annotation. Depth imaging by a laser distance sensor of plant in vitro cultures enabled the description of the dynamic behavior of the average canopy height, the maximum plant height, but also the culture media height and volume. Projected plant area in depth data by RANSAC (random sample consensus) segmentation approach well matched the projected plant area by RGB image processing pipeline. In addition, a successful proof of concept for in situ spectral fluorescence monitoring was achieved and challenges of thermal imaging were documented. Potential use cases for the digital quantification of key performance parameters in research and commercial application are discussed. Conclusion The technical realization of "Phenomenon" allows phenotyping of plant in vitro cultures under highly challenging conditions and enables multi-sensory monitoring through closed vessels, ensuring the aseptic status of the cultures. Automated sensor application in plant tissue culture promises great potential for a non-destructive growth analysis enhancing commercial propagation as well as enabling research with novel digital parameters recorded over time.
Why it matches plant phenotyping methods植物組織培養の形質を自動・非破壊・連続測定するマルチセンサーフェノタイピングシステムを開発し、画像分割や深度計測を検証しており、方法が研究の中心である。
abstractAn automated low-cost multi-sensor system acquiring phenotypic data of plant in vitro cultures was developed and evaluated.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe dataset supporting the conclusions of this article (Hard- and Software of “Phenomenon” phenotyping system) are available in an open-access Github repository, https://github.com/halube/Phenomenon .Open asset ↗halube/Phenomenonlines:224-282Code / dataset availability confirmedEurope PMC · Crossref · checked 7 Sept 2026
As phenomics data volume and dimensionality increase due to advancements in sensor technology, there is an urgent need to develop and implement scalable data processing pipelines. Current phenomics data processing pipelines lack modularity, extensibility, and processing distribution across sensor modalities and phenotyping platforms. To address these challenges, we developed PhytoOracle (PO), a suite of modular, scalable pipelines for processing large volumes of field phenomics RGB, thermal, PSII chlorophyll fluorescence 2D images, and 3D point clouds. PhytoOracle aims to ( i ) improve data processing efficiency; ( ii ) provide an extensible, reproducible computing framework; and ( iii ) enable data fusion of multi-modal phenomics data. PhytoOracle integrates open-source distributed computing frameworks for parallel processing on high-performance computing, cloud, and local computing environments. Each pipeline component is available as a standalone container, providing transferability, extensibility, and reproducibility. The PO pipeline extracts and associates individual plant traits across sensor modalities and collection time points, representing a unique multi-system approach to addressing the genotype-phenotype gap. To date, PO supports lettuce and sorghum phenotypic trait extraction, with a goal of widening the range of supported species in the future. At the maximum number of cores tested in this study (1,024 cores), PO processing times were: 235 minutes for 9,270 RGB images (140.7 GB), 235 minutes for 9,270 thermal images (5.4 GB), and 13 minutes for 39,678 PSII images (86.2 GB). These processing times represent end-to-end processing, from raw data to fully processed numerical phenotypic trait data. Repeatability values of 0.39-0.95 (bounding area), 0.81-0.95 (axis-aligned bounding volume), 0.79-0.94 (oriented bounding volume), 0.83-0.95 (plant height), and 0.81-0.95 (number of points) were observed in Field Scanalyzer data. We also show the ability of PO to process drone data with a repeatability of 0.55-0.95 (bounding area).
Why it matches plant phenotyping methods植物フェノミクスのマルチモーダル画像・点群から形質を抽出する、スケーラブルで再現可能な処理パイプラインの開発と反復性評価が中心である。
abstractwe developed PhytoOracle (PO), a suite of modular, scalable pipelines for processing large volumes of field phenomics RGB, thermal, PSII chlorophyll fluorescence 2D images, and 3D point clouds.
Reproduction assets foundThe paper's Code and Data Availability statements provide explicit public URLs for the authors' PhytoOracle processing code, ML training-data preparation scripts, trained model training code, and the season-10 lettuce benchmarking dataset (raw RGB/thermal/PSII images and point clouds) hosted on CyVerse.Dataset · publicThe datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://datacommons.cyverse.org/browse/iplant/home/shared/phytooracle/season_10_lettuce_yr_2020Open asset ↗iplant/home/shared/phytooracle/season_10_lettuce_yr_2020lines:640-662Code · publicThe automation script and data processing repositories can be accessed at: http://github.com/phytooracleOpen asset ↗github.com/phytooraclelines:640-662Code · publicThe Python scripts used to prepare RGB training data can be accessed here: http://github.com/phytooracle/automation/blob/main/ml/collect_rgb_data.pyOpen asset ↗github.com/phytooracle/automationlines:640-662Code · publicThe Python script used to prepare thermal training data can be accessed here: http://github.com/phytooracle/automation/blob/main/ml/collect_flir_data.pyOpen asset ↗github.com/phytooracle/automationlines:640-662Code · publicThe Python script used to prepare 3D-derived images can be found here: http://github.com/phytooracle/3d_heat_map/blob/main/3d_heat_map.pyOpen asset ↗github.com/phytooracle/3d_heat_maplines:640-662Code / dataset availability confirmedEurope PMC · checked 8 Sept 2026
Dormancy is a physiological state that confers winter hardiness to and orchestrates phenological phase progression in temperate perennial plants. Weather fluctuations caused by climate change increasingly disturb dormancy onset and release in plants including tree crops, causing aberrant growth, flowering and fruiting. Research in this field suffers from the lack of affordable non-invasive methods for online dormancy monitoring. We propose an automatic framework for low-cost, long-term, scalable dormancy studies in deciduous plants. It is based on continuous sensing of the photosynthetic activity of shoots via pulse-amplitude-modulated chlorophyll fluorescence sensors connected remotely to a data processing system. The resulting high-resolution time series of JIP-test parameters indicative of the responsiveness of the photosynthetic apparatus to environmental stimuli were subjected to frequency-domain analysis. The proposed approach overcomes the variance coming from diurnal changes of insolation and provides hints on the depth of dormancy. Our approach was validated over three seasons in an apple ( Malus × domestica Borkh.) orchard by collating the non-invasive estimations with the results of traditional methods (growing of the cuttings obtained from the trees at different phases of dormancy) and the output of chilling requirement models. We discuss the advantages of the proposed monitoring framework such as prompt detection of frost damage along with its potential limitations.
Why it matches plant phenotyping methods植物の休眠状態をクロロフィル蛍光センサーと周波数解析で非侵襲的に推定する監視手法を開発し、複数季節・従来法との比較で検証しており、表現型取得が研究の中心です。
abstractWe propose an automatic framework for low-cost, long-term, scalable dormancy studies in deciduous plants.
Reproduction assets foundThe authors explicitly state that the analysis code, accompanied by a subset of the data, is publicly available on GitHub (Lodinn/PAM-timeseries). The MDPI supplementary materials (S1) also contain paper-specific CF transient plots, correlation matrices, regression fits, and JIP-test parameter tables. Raw data and fullCode · publicCode used in the analysis, accompanied with a subset of the data, is available on GitHub ( https://github.com/Lodinn/PAM-timeseries , accessed on 20 September 2022).Open asset ↗Lodinn/PAM-timeserieslines:128-144Supplement · publicThe following supporting information can be downloaded at: https://www.mdpi.com/article/10.3390/plants11212811/s1 . A description of the PAM fluorimeter used in the work, including: Figure S1. The scheme of the experimental orchard plot.Open asset ↗lines:128-144Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Dormancy is a physiological state that confers winter hardiness to and orchestrates phenological phase progression in temperate perennial plants. Weather fluctuations caused by climate change increasingly disturb dormancy onset and release in many plant species including tree crops leading to aberrant growth, flowering, and fruiting. Currently, research in this field is impeded by the lack of affordable non-invasive methods for on-line monitoring of dormancy. We report on an automatic framework for low-cost, long-term, and scalable dormancy studies in deciduous plants. The proposed method is based on continuous near-field sensing of the photosynthetic activity of shoots via pulse-amplitude modulated chlorophyll fluorescence sensors connected remotely to a data processing system. The resulting high-resolution time series of JIP-test parameters indicative of the responsiveness of the photosynthetic apparatus to environmental stimuli are subjected to frequency-domain analysis. The proposed approach allows to overcome the variance coming from diurnal changes of insolation and to derive estimations on the depth of dormancy. Our approach was validated over three seasons in an experimental apple (Malus × domestica Borkh.) orchard by collating the non-invasive estimations with the results of traditional methods (growing of the cuttings obtained from the tress at different phases of dormancy) and the output of commonly used chilling requirement models. We discuss the advantages of the proposed monitoring framework such as prompt detection of freeze damages along with its potential limitations.
Why it matches plant phenotyping methods植物の休眠深度を非侵襲的に推定する蛍光センサーと時系列解析のフレームワークを開発し、従来法およびモデルと照合検証しており、表現型取得法が研究の中心である。
abstractWe report on an automatic framework for low-cost, long-term, and scalable dormancy studies in deciduous plants.
Reproduction assets foundThe authors state that the analysis code, accompanied by a subset of the data, is publicly available on GitHub. This is a paper-specific computational analysis asset for the chlorophyll fluorescence/JIP-test time-frequency analysis. The full raw data and derived parameters are only available on request, so they are notCode · publicic projects in priority areas of scientific and technological
development (grant number 075-15-2020-774).
Data Availability Statement: The raw data and derived parameters are available from the corre-
sponding author on reasonable request.
Code used in the analysis, accompanied with a subset of the data, is available on GitHub
(https://github.com/Lodinn/PAM-timeseries).
Acknowledgments: The indoors chlorophyll fluorescence measurements were carried out at the
Phototrophic Organisms Phenotyping user facilities of Lomonosov Moscow State University. TheOpen asset ↗Lodinn/PAM-timeseriespdf-layout-page:15 lines:1-58Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Genomic prediction has revolutionized crop breeding despite remaining issues of transferability of models to unseen environmental conditions and environments. Usage of endophenotypes rather than genomic markers leads to the possibility of building phenomic prediction models that can account, in part, for this challenge. Here, we compare and contrast genomic prediction and phenomic prediction models for 3 growth-related traits, namely, leaf count, tree height, and trunk diameter, from 2 coffee 3-way hybrid populations exposed to a series of treatment-inducing environmental conditions. The models are based on 7 different statistical methods built with genomic markers and ChlF data used as predictors. This comparative analysis demonstrates that the best-performing phenomic prediction models show higher predictability than the best genomic prediction models for the considered traits and environments in the vast majority of comparisons within 3-way hybrid populations. In addition, we show that phenomic prediction models are transferrable between conditions but to a lower extent between populations and we conclude that chlorophyll a fluorescence data can serve as alternative predictors in statistical models of coffee hybrid performance. Future directions will explore their combination with other endophenotypes to further improve the prediction of growth-related traits for crops.
Why it matches plant phenotyping methodsクロロフィル蛍光データを用いたフェノミック予測モデルを構築・比較し、成長形質の予測性能と条件間・集団間の転移性を評価しているため、植物フェノタイピング手法が中心である。
abstractThe models are based on 7 different statistical methods built with genomic markers and ChlF data used as predictors.
Reproduction assets foundThe paper's Data availability statement explicitly states that all code and datasets (including the ChlF phenomic data and growth-trait phenotypes used for GP/PP modeling) are freely available at the authors' public GitHub repository https://github.com/alainmbebi/GP-PP, which matches an allowed URL. Other URLs (BGLR CRCode · publicr and is an excellent proxy for photosynthesis in coffee, making it a tool of choice for assessing the vigor of a genotype, which the present study tends to prove.
Data availability
We implemented all statistical models using R programming language; the codes and all data sets used in the current study are freely available from https://github.com/alainmbebi/GP-PP .
Supplemental material is available at G3 online.
Supplementary Material
jkac170_Supplementary_Data_File_S1
Click here for additional data file.
jkac170_Supplementary_Data_File_S2
Click here for additional data file.
Acknowledgments
We would like to thank the 2 anonymous reviewers for their suggestions and comments.
Funding
ThOpen asset ↗alainmbebi/GP-PPlines:876-910Code / dataset availability confirmedEurope PMC · OpenAlex · checked 15 Sept 2026
The three-dimensional (3D) arrangement of cells in tissues provides an anatomical basis for analyzing physiological and biochemical aspects of plant and animal cellular development and function. In this study, we established a protocol for tissue clearing and 3D imaging in rice. Our protocol is based on three improvements: clearing with iTOMEI (clearing solution suitable for plants), developing microscopic conditions in which the Z step is optimized for 3D reconstruction, and optimizing cell-wall staining. Our protocol successfully 3D imaged rice shoot apical meristems, florets, and root apical meristems at cellular resolution throughout whole tissues. Using fluorescent reporters of auxin signaling in rice root tips, we also revealed the 3D distribution of auxin signaling events that are activated in the columella, quiescent center, and multiple rows of cells in the stele of the root apical meristem. Examination of cells with higher levels of auxin signaling revealed that only the central row of cells was connected to the quiescent center. Our method provides opportunities to observe the 3D arrangement of cells in rice tissues.
Why it matches plant phenotyping methodsイネ組織を対象に、組織透明化・最適化した3D顕微鏡撮像・細胞壁染色による細胞配置の取得法を開発しており、植物表現型の画像取得が中心的な技術貢献である。
abstractIn this study, we established a protocol for tissue clearing and 3D imaging in rice.
Reproduction assets foundThe paper's 3D imaging datasets (supplementary videos S1–S6 of rice SAMs, florets, anthers, and root tips, plus figure data) are publicly available via the MDPI supplementary materials link. No separate analysis code repository is mentioned.Dataset · publiccquisition, which took approximately 2 h for 150 μm in depth, the images were processed using LASX software (Leica Microsystems, Tokyo, Japan).
Publisher’s Note: MDPI stays neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Supplementary Materials
The following are available online at https://www.mdpi.com/article/10.3390/ijms23010040/s1 .
Click here for additional data file.
Author Contributions
M.S. and H.T. designed the research; M.S., H.A., Y.S. and S.M. performed the research; M.S. and H.T. analyzed the data; M.S. and H.T. wrote the paper. All authors have read and agreed to the published version of the manuscript.
Funding
This study was supporOpen asset ↗lines:70-202Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Recent advances in leaf fluorescence measurements and canopy proximal remote sensing currently enable the non-destructive collection of rich diurnal and seasonal time series, which are required for monitoring vegetation function at the temporal and spatial scales relevant to the natural dynamics of photosynthesis. Remote sensing assessments of vegetation function have traditionally used actively excited foliar chlorophyll fluorescence measurements, canopy optical reflectance data and vegetation indices (VIs), and only recently passive solar induced chlorophyll fluorescence (SIF) measurements. In general, reflectance data are more sensitive to the seasonal variations in canopy chlorophyll content and foliar biomass, while fluorescence observations more closely relate to the dynamic changes in plant photosynthetic function. With this dataset we link leaf level actively excited chlorophyll fluorescence, canopy proximal reflectance and SIF, with eddy covariance measurements of gross ecosystem productivity (GEP). The dataset was collected during the 2017 growing season on maize, using three automated systems (i.e., Monitoring Pulse-Amplitude-Modulation fluorimeter, Moni-PAM; Fluorescence Box, FloX; and from eddy covariance tower). The data were quality checked, filtered and collated to a common 30 minutes timestep. We derived vegetation indices related to canopy functioning (e.g., Photochemical Reflectance Index, PRI; Normalized Difference Vegetation Index, NDVI; Chlorophyll Red-edge, Clre) to investigate how SIF and VIs can be coupled for monitoring vegetation photosynthesis. The raw datasets and the filtered and collated data are provided to enable new processing and analyses.
Why it matches plant phenotyping methods葉・キャノピーの蛍光、反射、植生指数を用いて植物の光合成機能を測定・統合した再利用可能なデータセットであり、センサー計測系とデータ処理が研究の中心である。
abstractWith this dataset we link leaf level actively excited chlorophyll fluorescence, canopy proximal reflectance and SIF, with eddy covariance measurements of gross ecosystem productivity (GEP).
Reproduction assets foundThis Data in Brief article explicitly deposits its maize leaf/canopy fluorescence, reflectance, VI and GEP time-series dataset (raw and collated files) in Mendeley Data under DOI 10.17632/b84jk376c3.1, and the FloX reflectance/SIF processing was performed with two author-maintained open-source R packages on GitHub (tomDataset · publicral Research Center (BARC)
City/Town/Region: Beltsville, Maryland
Country: United States of America
Latitude and longitude (and GPS coordinates, if possible) for collected samples/data: 39.030686, 76.84546
Timeframe: 2017 growing season (June-October)
Data accessibility
Repository name: Mendeley Data
Data identification number: http://dx.doi.org/10.17632/b84jk376c3.1
https://data.mendeley.com/datasets/b84jk376c3/draft?a=09b70ff8-599e-4405-a0f1-7a0c39e118fd
Related research articles
Campbell, P., K. Huemmrich, E. Middleton, et al. 2019. ``Diurnal and Seasonal Variations in Chlorophyll Fluorescence Associated with Photosynthesis at Leaf and Canopy Scales.'' Remote Sensing , 11 (5): 488 [ 10.3Open asset ↗Mendeley Data · 10.17632/b84jk376c3.1lines:36-69Dataset · publicion: Beltsville, Maryland
Country: United States of America
Latitude and longitude (and GPS coordinates, if possible) for collected samples/data: 39.030686, 76.84546
Timeframe: 2017 growing season (June-October)
Data accessibility
Repository name: Mendeley Data
Data identification number: http://dx.doi.org/10.17632/b84jk376c3.1
https://data.mendeley.com/datasets/b84jk376c3/draft?a=09b70ff8-599e-4405-a0f1-7a0c39e118fd
Related research articles
Campbell, P., K. Huemmrich, E. Middleton, et al. 2019. ``Diurnal and Seasonal Variations in Chlorophyll Fluorescence Associated with Photosynthesis at Leaf and Canopy Scales.'' Remote Sensing , 11 (5): 488 [ 10.3390/rs11050488 ]
Yang, P., C. van der TolOpen asset ↗Mendeley Data · b84jk376c3lines:36-69Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 8 Sept 2026
Cosegmentation is a newly emerging computer vision technique used to segment an object from the background by processing multiple images at the same time. Traditional plant phenotyping analysis uses thresholding segmentation methods which result in high segmentation accuracy. Although there are proposed machine learning and deep learning algorithms for plant segmentation, predictions rely on the specific features being present in the training set. The need for a multi-featured dataset and analytics for cosegmentation becomes critical to better understand and predict plants' responses to the environment. High-throughput phenotyping produces an abundance of data that can be leveraged to improve segmentation accuracy and plant phenotyping. This paper introduces four datasets consisting of two plant species, Buckwheat and Sunflower, each split into control and drought conditions. Each dataset has three modalities (Fluorescence, Infrared, and Visible) with 7 to 14 temporal images that are collected in a high-throughput facility at the University of Nebraska-Lincoln. The four datasets (which will be collected under the CosegPP data repository in this paper) are evaluated using three cosegmentation algorithms: Markov random fields-based, Clustering-based, and Deep learning-based cosegmentation, and one commonly used segmentation approach in plant phenotyping. The integration of CosegPP with advanced cosegmentation methods will be the latest benchmark in comparing segmentation accuracy and finding areas of improvement for cosegmentation methodology.
Why it matches plant phenotyping methods植物フェノタイピング用のマルチモーダル・時系列データセットを開発し、複数のコセグメンテーション手法をベンチマークする研究であり、画像からの植物抽出・表現型解析手法が中心です。
abstractThis paper introduces four datasets consisting of two plant species, Buckwheat and Sunflower, each split into control and drought conditions.
Reproduction assets foundThe paper's CosegPP plant image dataset (Buckwheat/Sunflower, multi-modal, with ground-truth masks) is publicly deposited on Zenodo per the Data Availability statement. The GitHub repos mentioned (MIG, Subdiscover, DeepCO3) are cited third-party prior-work code, not authors' paper-specific analysis code.Dataset · publicData Availability: All relevant data underlying this study are available at https://doi.org/10.5281/zenodo.5117176 .Open asset ↗zenodo · 10.5281/zenodo.5117176lines:138-150Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Laboratory / benchtopChlorophyll fluorescenceMicroscopyRootGrowth / time-series analysisVisualization / data management
Fabricated ecosystems (EcoFABs) offer an innovative approach to in situ examination of microbial establishment patterns around plant roots using nondestructive, high-resolution microscopy. Previously high-resolution imaging was challenging because the roots were not constrained to a fixed distance from the objective. Here, we describe a new ‘Imaging EcoFAB’ and the use of this device to image the entire root system of growing Brachypodium distachyon at high resolutions (20×, 40×) over a 3-week period. The device is capable of investigating root–microbe interactions of multimember communities. We examined nine strains of Pseudomonas simiae with different fluorescent constructs to B. distachyon and individual cells on root hairs were visible. Succession in the rhizosphere using two different strains of P. simiae was examined, where the second addition was shown to be able to establish in the root tissue. The device was suitable for imaging with different solid media at high magnification, allowing for the imaging of fungal establishment in the rhizosphere. Overall, the Imaging EcoFAB could improve our ability to investigate the spatiotemporal dynamics of the rhizosphere, including studies of fluorescently-tagged, multimember, synthetic communities.
Why it matches plant phenotyping methods植物根系全体を高解像度・経時的に撮像するための新規チャンバーを開発し、その撮像性能と用途を示しており、表現型取得法が研究の中心である。
abstractHere, we describe a new ‘Imaging EcoFAB’ and the use of this device to image the entire root system of growing Brachypodium distachyon at high resolutions (20×, 40×) over a 3-week period.
Reproduction assets foundThe paper's computational analysis (K-means clustering and segmentation/cell counting of the 40× multispectral root image) is explicitly stated to have its environment, code, and parent data file available in the Supplementary Materials, hosted at the MDPI S1 link. Additionally, the 3D-printing-ready Imaging EcoFAB 3D-Code · publicThe environment, code, and parent data file are available in the Supplementary Materials .Open asset ↗lines:65-81Code / dataset availability confirmedOpenAlex · Crossref · Europe PMC · checked 15 Sept 2026
Abstract Chlorophyll fluorescence (ChlF) is a powerful non‐invasive technique for probing photosynthesis. Although proposed as a method for drought tolerance screening, ChlF has not yet been fully adopted in physiological breeding, mainly due to limitations in high‐throughput field phenotyping capabilities. The light‐induced fluorescence transient (LIFT) sensor has recently been shown to reliably provide active ChlF data for rapid and remote characterisation of plant photosynthetic performance. We used the LIFT sensor to quantify photosynthesis traits across time in a large panel of durum wheat genotypes subjected to a progressive drought in replicated field trials over two growing seasons. The photosynthetic performance was measured at the canopy level by means of the operating efficiency of Photosystem II ( ) and the kinetics of electron transport measured by reoxidation rates ( and ). Short‐ and long‐term changes in ChlF traits were found in response to soil water availability and due to interactions with weather fluctuations. In mild drought, and were little affected, while was consistently accelerated in water‐limited compared to well‐watered plants, increasingly so with rising vapour pressure deficit. This high‐throughput approach allowed assessment of the native genetic diversity in ChlF traits while considering the diurnal dynamics of photosynthesis.
Why it matches plant phenotyping methodsLIFTセンサーを用いた高スループットな圃場キャノピー蛍光計測が研究の中心であり、光合成形質を定量するフェノタイピング手法を実質的に適用している。
abstractThe light‐induced fluorescence transient (LIFT) sensor has recently been shown to reliably provide active ChlF data for rapid and remote characterisation of plant photosynthetic performance.
Reproduction assets foundThe paper's raw and processed/cleaned LIFT chlorophyll fluorescence and spectral phenotyping datasets for both growing seasons are openly deposited on Zenodo (DOI 10.5281/zenodo.4305673), as stated in the methods and data availability statement. TERRA-REF is only cited as the meteorological data provider (infraction: aDataset · public) and 77,946 (97%) ChlF
transients in Y1 and Y2, respectively, were averaged, resulting in one
value per trait per plot per time of measurement (N = 5,544 data
points per trait in Y1; and N = 4,032 data points per trait in Y2). The
raw data and the processed and cleaned datasets for both growing
seasons are publicly accessible (https://doi.org/10.5281/zenodo.4305673).2.9 | Statistical analysis
A linear mixed model (LMM) approach was used to analyse the resolv-
able row-column designs with repeated measures for both Y1 and Y2.
Single-stage analysis models were applied to partition variance com-
ponents and to estimate genotypic effects for all traits based on “Best
Linear Unbiased PredictioOpen asset ↗Zenodo · 10.5281/zenodo.4305673pdf-raw-page:6 lines:1-96Code / dataset availability confirmedEurope PMC · bioRxiv · checked 15 Sept 2026
This article describes a new methodology for detailed mapping of the lignification capacity of plant cell walls that we have called “REPRISAL” for REP orter R atiometrics I ntegrating S egmentation for A nalyzing L ignification. REPRISAL consists of the combination of three separate approaches. In the first approach, H*, G* and S* monolignol chemical reporters, corresponding to p -coumaryl alcohol, coniferyl alcohol and sinapyl alcohol, are used to label the growing lignin polymer in a fluorescent triple labelling strategy based on the sequential use of 3 main bioorthogonal chemical reactions. In the second step, an automatic parametric and/or artificial intelligence (AI) segmentation algorithm is developed that assigns fluorescent image pixels to 3 distinct cell wall zones corresponding to cell corners (CC), compound middle lamella (CML) and secondary cell walls (SCW). The last step corresponds to the exploitation of a ratiometric approach enabling statistical analyses of differences in monolignol reporter distribution (ratiometric method 1) and proportions (ratiometric method 2) within the different cell wall zones. In order to demonstrate the potential of REPRISAL for investigating lignin formation we firstly describe its use to map developmentally-related changes in the lignification capacity of WT Arabidopsis interfascicular fiber cells. We then show how it can be used to reveal subtle phenotypical differences in lignification by analyzing the Arabidopsis prx64 peroxidase mutant and provide further evidence for the implication of the AtPRX64 protein in floral stem lignification. Finally, we demonstrate the general applicability of REPRISAL by using it to map lignification capacity in poplar, flax and maize.
Why it matches plant phenotyping methodsREPRISALという蛍光画像・自動セグメンテーション・比率解析を統合した、細胞壁リグニン形成状態の植物フェノタイピング手法を開発し、複数種・変異体で適用している。
abstractThis article describes a new methodology for detailed mapping of the lignification capacity of plant cell walls that we have called “REPRISAL”
Reproduction assets foundThe authors publicly deposited their Fiji/ImageJ segmentation plugin (GUI, parametric macro, WEKA classifier and training data) plus representative confocal sample images in a Zenodo repository, explicitly referenced in the methods and supplementary data as containing the paper's lignification ratiometric analysis toolDataset · publicThe binary mask of each region was applied to each fluorescence channel and
569
fluorescence mean values were extracted for the 9 newly-created images. A recapitulative
570
montage image was then created to quickly estimate segmentation quality. The imageJ macro
571
and sample images are available in the Zenodo repository,
572
http://doi.org/10.5281/zenodo.4809980.573
574
AI Segmentation
575
The Machine learning approach is based on the “Waikato Environment for Knowledge
576
Analysis” (WEKA) implemented in ImageJ (Witten et al., 2016). We first defined a
577
classification based on four categories: i) secondary cell wall, ii) cell corners, iii) compound
578
middle lamella and iv) backgroOpen asset ↗zenodo · 10.5281/zenodo.4809980pdf-raw-page:21 lines:1-63Code / dataset availability confirmedOpenAlex · Europe PMC · bioRxiv · checked 8 Sept 2026
ABSTRACT Advancements in the use of genome-wide markers have provided new opportunities for dissecting the genetic components that control phenotypic trait variation. However, cost-effectively characterizing agronomically important phenotypic traits on a large scale remains a bottleneck. Unmanned aerial vehicle (UAV)-based high-throughput phenotyping has recently become a prominent method, as it allows large numbers of plants to be analyzed in a time-series manner. In this experiment, 233 inbred lines from the maize diversity panel were grown in a replicated incomplete block under both nitrogen-limited conditions and following conventional agronomic practices. UAV images were collected during different plant developmental stages throughout the growing season. A pipeline for extracting plot-level images, filtering images to remove non-foliage elements, and calculating canopy coverage and greenness ratings based on vegetation indices (VIs) was developed. After applying the pipeline, about half a million plot-level image clips were obtained for 12 different time points. High correlations were detected between VIs and ground truth physiological and yield-related traits collected from the same plots, i.e., Vegetative Index (VEG) vs. leaf nitrogen levels (Pearson correlation coefficient, R = 0.73), Woebbecke index vs. leaf area ( R = -0.52), and Visible Atmospherically Resistant Index (VARI) vs. 20 kernel weight – a yield component trait ( R = 0.40). The genome-wide association study was performed using canopy coverage and each of the VIs at each date, resulting in N = 29 unique genomic regions associated with image extracted traits from three or more of the 12 total time points. A candidate gene Zm00001d031997 , a maize homolog of the Arabidopsis HCF244 ( high chlorophyll fluorescence 244 ), located underneath the leading SNPs of the canopy coverage associated signals that were repeatedly detected under both nitrogen conditions. The plot-level time-series phenotypic data and the trait-associated genes provide great opportunities to advance plant science and to facilitate plant breeding.
Why it matches plant phenotyping methodsUAV画像から作物プロットの被覆率・緑色度を抽出するパイプラインを開発し、地上測定との相関で検証した研究であり、フェノタイピング手法が中心です。
abstractA pipeline for extracting plot-level images, filtering images to remove non-foliage elements, and calculating canopy coverage and greenness ratings based on vegetation indices (VIs) was developed.
Reproduction assets foundThe paper's raw UAV RGB imagery used for the maize phenotyping pipeline is publicly deposited on CyVerse (DOI: 10.25739/4t1v-ab64), as stated in the supplied text. No author analysis code or trained models are described with public availability.Dataset · publicThe original UAV images
taken for this study are available at CyVerse (DOI: 10.25739/4t1v-ab64).Open asset ↗CyVerse · 10.25739/4t1v-ab64pdf-page:5 lines:1-38Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Abstract. Root water uptake by plants is a vital process that influences terrestrial energy, water, and carbon exchanges. At the soil, vegetation, and atmosphere interfaces, root water uptake and solar radiation predominantly regulate the dynamics and health of vegetation growth, which can be remotely monitored by satellites, using the soil–plant relationship proxy – solar-induced chlorophyll fluorescence. However, most current canopy photosynthesis and fluorescence models do not account for root water uptake, which compromises their applications under water-stressed conditions. To address this limitation, this study integrated photosynthesis, fluorescence emission, and transfer of energy, mass, and momentum in the soil–plant–atmosphere continuum system, via a simplified 1D root growth model and a resistance scheme linking soil, roots, leaves, and the atmosphere. The coupled model was evaluated with field measurements of maize and grass canopies. The results indicated that the simulation of land surface fluxes was significantly improved by the coupled model, especially when the canopy experienced moderate water stress. This finding highlights the importance of enhanced soil heat and moisture transfer, as well as dynamic root growth, on simulating ecosystem functioning.
Why it matches plant phenotyping methods植物の光合成・蛍光などの生理状態を推定する結合モデルを開発し、トウモロコシおよび草本キャノピーで評価しており、モデル開発と検証が研究の中心です。
abstractTo address this limitation, this study integrated photosynthesis, fluorescence emission, and transfer of energy, mass, and momentum in the soil–plant–atmosphere continuum system, via a simplified 1D root growth model and a resistance scheme linking soil, roots, leaves, and the atmosphere.
Reproduction assets foundThe paper's Code and data availability section explicitly archives the exact STEMMUS–SCOPE model version on Zenodo and publishes the Yangling eddy-covariance validation dataset on 4TU, both with public DOIs.Dataset · publicdoi.org/10.5281/zenodo.3839092 , Wang et al., 2020). The original source of the SCOPE model and STEMMUS model was obtained from Van der Tol et al. (2009) and Zeng et al. (2011a, b), respectively. The tower-based eddy-covariance measurements used for model validation were provided by the authors for the Yangling station, China ( https://doi.org/10.4121/uuid:aa0ed483-701e-4ba0-b7b0-674695f5f7a7 , Wang et al., 2019), and were obtained from the FLUXNET2015 Dataset and PLUMBER2 program for the Vaira Ranch (US-Var) FLUXNET site.
Author contributions
YW, YZ, HC, and ZS designed the study. YW developed the code, conducted the analysis, and wrote the paper. YW and HC collected and shared their eddy-cOpen asset ↗10.4121/uuid:aa0ed483-701e-4ba0-b7b0-674695f5f7a7lines:657-684Code / dataset availability confirmedCrossref · checked 9 Sept 2026
Brassica oleracea is an important crop species that at early growth stages may exhibit failure of the apical growing point, an abnormality called “blindness”. The occurrence of blindness is promoted by exposure to low temperatures during imbibition and germination, but the causes of sensitivity to such conditions are unknown. We combined three analytical seed technology instruments to explore seed physical properties that are highly correlated with quality parameters and might be used directly for grading or sorting seed lots into subpopulations varying in potential susceptibility to blindness. For image analysis, we used the VideometerLab instrument, which can scan 19 wavelengths from ultraviolet to infrared and utilize that information in any combination to potentially identify unique criteria related to seed quality. The iXeed CF Analyzer was utilized to obtain chlorophyll fluorescence values for individual seeds. Chlorophyll contents of many seeds can be used as an indicator of seed maturity, a major contributor to seed quality. Finally, oxygen consumption measurements of individual seeds as obtained with the Q2 instrument are highly correlated with their performance under a wide variety of conditions. Six Brassica seed lots differed in their susceptibility to induction of blindness or loss of viability due to 48 h hydrated incubation at 1.5 ∘C. Analysis of physical and respiratory parameters identified some measurements that were highly correlated with the occurrence of blindness. Higher chlorophyll content, as detected by the CF-Mobile and certain wavelengths in the Videometer, was associated with greater occurrence of blindness or death following the induction treatment, suggesting that more immature seeds may be susceptible to blindness. Further research is required, but methods to detect and sort such seeds based on physical characteristics appear to be feasible.
Why it matches plant phenotyping methods種子の画像・蛍光・呼吸測定を組み合わせ、物理特性から発芽品質やblindness感受性を評価・選別する方法が研究の中心であり、単なる生物学的結果測定ではない。
abstractWe combined three analytical seed technology instruments to explore seed physical properties that are highly correlated with quality parameters and might be used directly for grading or sorting seed lots into subpopulations varying in potential susceptibility to blindness.
Reproduction assets foundThe paper's individual-seed phenotyping measurements (chlorophyll fluorescence, multispectral imaging, Q2 respiration, plant blindness scores) are consolidated in Supplemental Table S1 (Seed parameters database) and related supplements, publicly hosted on the MDPI article site. No author analysis code was deposited; CRDataset · publicSupplementary Materials: The following are available at https://www.mdpi.com/2077-0472/11/3
/220/s1, Table S1: Seed parameters database, Table S2: Q2 parameters, Table S3: MFA EigenvaluesOpen asset ↗pdf-page:20 lines:1-58Code / dataset availability confirmedOpenAlex · Europe PMC · checked 14 Sept 2026
Deep understanding of genetic architecture of water-stress tolerance is critical for efficient and optimal development of water-stress tolerant cultivars, which is the most economical and environmentally sound approach to maintain lettuce production with limited irrigation. Lettuce ( Lactuca sativa L.) production in areas with limited precipitation relies heavily on the use of ground water for irrigation. Lettuce plants are highly susceptible to water-stress, which also affects their nutrient uptake efficiency. Water stressed plants show reduced growth, lower biomass, and early bolting and flowering resulting in bitter flavors. Traditional phenotyping methods to evaluate water-stress are labor intensive, time-consuming and prone to errors. High throughput phenotyping platforms using kinetic chlorophyll fluorescence and hyperspectral imaging can effectively attain physiological traits related to photosynthesis and secondary metabolites that can enhance breeding efficiency for water-stress tolerance. Kinetic chlorophyll fluorescence and hyperspectral imaging along with traditional horticultural traits identified genomic loci affected by water-stress. Supervised machine learning models were evaluated for their accuracy to distinguish water-stressed plants and to identify the most important water-stress related parameters in lettuce. Random Forest (RF) had classification accuracy of 89.7% using kinetic chlorophyll fluorescence parameters and Neural Network (NN) had classification accuracy of 89.8% using hyperspectral imaging derived vegetation indices. The top ten chlorophyll fluorescence parameters and vegetation indices selected by sequential forward selection by RF and NN were genetically mapped using a L. sativa × L. serriola interspecific recombinant inbred line (RIL) population. A total of 25 quantitative trait loci (QTL) segregating for water-stress related horticultural traits, 26 QTL for the chlorophyll fluorescence traits and 34 QTL for spectral vegetation indices (VI) were identified. The percent phenotypic variation (PV) explained by the horticultural QTL ranged from 6.41 to 19.5%, PV explained by chlorophyll fluorescence QTL ranged from 6.93 to 13.26% while the PV explained by the VI QTL ranged from 7.2 to 17.19%. Eight QTL clusters harboring co-localized QTL for horticultural traits, chlorophyll fluorescence parameters and VI were identified on six lettuce chromosomes. Molecular markers linked to the mapped QTL clusters can be targeted for marker-assisted selection to develop water-stress tolerant lettuce.
Why it matches plant phenotyping methods水ストレス関連形質の取得を目的に、キネティッククロロフィル蛍光、ハイパースペクトル画像、機械学習を用いる高スループット表現型解析基盤を評価・適用しており、方法が研究の中心である。
abstractTraditional phenotyping methods to evaluate water-stress are labor intensive, time-consuming and prone to errors. High throughput phenotyping platforms using kinetic chlorophyll fluorescence and hyperspectral imaging can effectively attain physiological traits related to photosynthesis and secondary metabolites that can enhance breeding efficiency for water-stress tolerance.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicSupplementary Table 1
Phenotypic values of selected chlorophyll fluorescence parameters and vegetation indices during drought stress progression.Open asset ↗lines:1465-1521Code / dataset availability confirmedCrossref · Europe PMC · checked 9 Sept 2026
Basil is one of the most widespread aromatic and medicinal plants, which is often grown in drought- and salinity-prone regions. Often co-occurrence of drought and salinity stresses in agroecosystems and similarities of symptoms which they cause on plants complicates the differentiation among them. Development of automated phenotyping techniques with integrative and simultaneous quantification of multiple morphological and physiological traits enables early detection and quantification of different stresses on a whole plant basis. In this study, we have used different phenotyping techniques including chlorophyll fluorescence imaging, multispectral imaging, and 3D multispectral scanning, aiming to quantify changes in basil phenotypic traits under early and prolonged drought and salinity stress and to determine traits which could differentiate among drought and salinity stressed basil plants. Ocimum basilicum “Genovese” was grown in a growth chamber under well-watered control [45–50% volumetric water content (VWC)], moderate salinity stress (100 mM NaCl), severe salinity stress (200 mM NaCl), moderate drought stress (25–30% VWC), and severe drought stress (15–20% VWC). Phenotypic traits were measured for 3 weeks in 7-day intervals. Automated phenotyping techniques were able to detect basil responses to early and prolonged salinity and drought stress. In addition, several phenotypic traits were able to differentiate among salinity and drought. At early stages, low anthocyanin index (ARI), chlorophyll index (CHI), and hue (HUE 2 D ), and higher reflectance in red (R Red ), reflectance in green (R Green ), and leaf inclination (LINC) indicated drought stress. At later stress stages, maximum fluorescence (F m ), HUE 2 D , normalized difference vegetation index (NDVI), and LINC contribute the most to the differentiation among drought and non-stressed as well as among drought and salinity stressed plants. ARI and electron transport rate (ETR) were best for differentiation of salinity stressed plants from non-stressed plants both at early and prolonged stress.
Why it matches plant phenotyping methods複数の自動フェノタイピング技術を用いて、形態・生理形質を統合的に定量し、乾燥・塩ストレスの早期検出と識別を評価しており、フェノタイピング手法の応用が研究の中心である。
abstractDevelopment of automated phenotyping techniques with integrative and simultaneous quantification of multiple morphological and physiological traits enables early detection and quantification of different stresses on a whole plant basis.
Reproduction assets found本文中に内容が明示された植物フェノタイピング関連の補足表と、その公開リンクを確認しました。Supplement · publicSupplementary Table 2
Analysis of variance (ANOVA) for measured phenotypic traits of basil grown in different treatments: control (C), moderate salinity stress (S1), severe salinity stress (S2), moderate drought (D1), and severe drought (D2).Open asset ↗lines:494-517Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Image-based symptom scoring of plant diseases is a powerful tool for associating disease resistance with plant genotypes. Advancements in technology have enabled new imaging and image processing strategies for statistical analysis of time-course experiments. There are several tools available for analyzing symptoms on leaves and fruits of crop plants, but only a few are available for the model plant Arabidopsis thaliana (Arabidopsis). Arabidopsis and the model fungus Botrytis cinerea (Botrytis) comprise a potent model pathosystem for the identification of signaling pathways conferring immunity against this broad host-range necrotrophic fungus. Here, we present two strategies to assess severity and symptom progression of Botrytis infection over time in Arabidopsis leaves. Thus, a pixel classification strategy using color hue values from red-green-blue (RGB) images and a random forest algorithm was used to establish necrotic, chlorotic, and healthy leaf areas. Secondly, using chlorophyll fluorescence (ChlFl) imaging, the maximum quantum yield of photosystem II (F v /F m ) was determined to define diseased areas and their proportion per total leaf area. Both RGB and ChlFl imaging strategies were employed to track disease progression over time. This has provided a robust and sensitive method for detecting sensitive or resistant genetic backgrounds. A full methodological workflow, from plant culture to data analysis, is described.
Why it matches plant phenotyping methods植物病害の症状・重症度・進展を画像から定量化する方法の開発とワークフロー提示が中心であり、植物状態の表現型取得に該当する。
abstractHere, we present two strategies to assess severity and symptom progression of Botrytis infection over time in Arabidopsis leaves.
Reproduction assets foundThe authors explicitly state that all R and ImageJ scripts and the study data are openly available in their public GitHub repository, which directly reproduces this paper's Botrytis symptom phenotyping analysis.Code · publicAll R and ImageJ script generated to process are available at https://github.com/mipavici/MDPI_leaf_infection .Open asset ↗mipavici/MDPI_leaf_infectionlines:69-123Dataset · publicThe data presented in this study are openly available at https://github.com/mipavici/MDPI_leaf_infection .Open asset ↗mipavici/MDPI_leaf_infectionlines:69-123Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
PeachChlorophyll fluorescenceFruitClassificationGrowth / development / phenologyPigment / colour / senescence
Technology for rapid, non-invasive and accurate determination of fruit maturity is increasingly sought after in horticultural industries. This study investigated the ability to predict fruit maturity of yellow peach cultivars using a prototype non-destructive fluorescence spectrometer. Collected spectra were analysed to predict flesh firmness (FF), soluble solids concentration (SSC), index of absorbance difference (I AD ), skin and flesh colour attributes (i.e., a* and H°) and maturity classes (immature, harvest-ready and mature) in four yellow peach cultivars-'August Flame', 'O'Henry', 'Redhaven' and 'September Sun'. The cultivars provided a diverse range of maturity indices. The fluorescence spectrometer consistently predicted I AD and skin colour in all the cultivars under study with high accuracy (Lin's concordance correlation coefficient > 0.85), whereas flesh colour's estimation was always accurate apart from 'Redhaven'. Except for 'September Sun', good prediction of FF and SSC was observed. Fruit maturity classes were reliably predicted with a high likelihood ( F1 -score = 0.85) when samples from the four cultivars were pooled together. Further studies are needed to assess the performance of the fluorescence spectrometer on other fruit crops. Work is underway to develop a handheld version of the fluorescence spectrometer to improve the utility and adoption by fruit growers, packhouses and supply chain managers.
Why it matches plant phenotyping methods蛍光分光計を用いてモモ果実の成熟度や品質関連形質を非破壊推定し、複数品種で精度評価しているため、植物フェノタイピング手法が中心です。
abstractusing a prototype non-destructive fluorescence spectrometer
Reproduction assets foundThe paper reports peach fluorescence-spectra phenotyping and PLS/LDA modelling. The only qualifying paper-specific public asset is the authors' sample analysis code (simulated annealing wavelength band selection with PLS), explicitly stated as freely available as a Jupyter Notebook. No public phenotype dataset, spectraCode · publicSample scripts of the algorithms are freely available as a Project Jupyter Notebook [ 45 ].Open asset ↗lines:45-57Code / dataset availability confirmedbioRxiv · Europe PMC · checked 15 Sept 2026
Plant thermal tolerance is a crucial research area as the climate warms and extreme weather events become more frequent. Leaves exposed to temperature extremes have inhibited photosynthesis and will accumulate damage to photosystem II (PSII) if tolerance thresholds are exceeded. Temperature-dependent changes in basal chlorophyll fluorescence (T-F0) can be used to identify the critical temperature at which PSII is inhibited. We developed and tested a high-throughput method for measuring the critical temperatures for PSII at low (CTMIN) and high (CTMAX) temperatures using a Maxi-Imaging fluorimeter and a thermoelectric Peltier plate heating/cooling system. We examined how experimental conditions: wet vs dry surfaces for leaves and heating/cooling rate, affect CTMIN and CTMAX across four species. CTMAX estimates were not different whether measured on wet or dry surfaces, but leaves were apparently less cold tolerant when on wet surfaces. Heating/cooling rate had a strong effect on both CTMAX and CTMIN that was species-specific. We discuss potential mechanisms for these results and recommend settings for researchers to use when measuring T-F0. The approach that we demonstrated here allows the high-throughput measurement of a valuable ecophysiological parameter that estimates the critical temperature thresholds of leaf photosynthetic performance in response to thermal extremes.
Why it matches plant phenotyping methods葉の熱耐性・PSII機能の臨界温度を高スループットに測定する蛍光イメージング手法を開発・検証しており、表現型取得法が研究の中心である。
abstractWe developed and tested a high-throughput method for measuring the critical temperatures for PSII at low (CTMIN) and high (CTMAX) temperatures using a Maxi-Imaging fluorimeter and a thermoelectric Peltier plate heating/cooling system.
Reproduction assets foundThe paper provides authors' public R code and example files for extracting Tcrit values from T-F0 chlorophyll fluorescence curves, hosted on the authors' GitHub repository. The paper also states phenotype data are openly available in figshare (10.6084/m9.figshare.12545093), but no figshare URL is present in the allowedCode · publican leaf temperature estimated from
227 two thermocouples attached to leaves on the plate and relative F0 values using the segmented R
228 package (Muggeo 2017) using the R Environment for Statistical Computing (R Core Team
229 2020). We provide example files and example R code for extracting Tcrit values from T-F0
230 curves at https://github.com/pieterarnold/Tcrit-extraction.
231
232 Surface wetness experiment: effect of wet vs dry surfaces for leaves on CTMIN and CTMAX
233 Most experiments that measure T-F0 have measured leaf samples with all excess surface
234 moisture removed, on a dry surface. However, maintaining water content of detached leaves by
235 providing a wet surface where leaOpen asset ↗pieterarnold/Tcrit-extractionpdf-layout-page:8 lines:1-46Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Combining information of plant physiological processes with climate control systems can improve control accuracy in controlled environments as greenhouses and plant factories. Through that, resource optimization can be achieved. To predict the plant physiological processes and implement them in control actions of interest, a reliable monitoring system and a capable control system are needed. In this paper, we focused on the option to use real-time crop monitoring for precision climate control in greenhouses. For that, we studied the processes and external factors influencing leaf net CO 2 assimilation rate ( A L , µmol CO 2 m -2 s -1 ) as possible variables of a plant performance indicator. While measured greenhouse environmental variables such as light, temperature, or humidity showed a direct relation between A L and light-quantum yield of photosystem II (Φ 2 ), we defined three objectives: (1) to explore the relationship between climate variables and A L , as well as Φ 2 ; (2) create a simple and reliable method for real-time prediction of A L with continuously Φ 2 measurements; and (3) calibrate parameters to predict chloroplast electron transport rate as input in A L modelling. Due to practical obstacles in measuring CO 2 gas-exchange in commercial production, we explored a method to predict A L by measuring Φ 2 of leaves in a commercial hydroponic greenhouse tomato crop ("Pureza"). We calculated A L with two different approaches based on either the negative exponential response model with simplified biochemical equations (marked as Model I) or the non-rectangular hyperbola full biochemical photosynthetic models (marked as Model II). Using Model I can only be used to predict A L with large uncertainty (R 2 0.64; RMSE 2.21), while using Φ 2 as input to Model II could be used to improve the prediction accuracy of A L (R 2 0.71; RMSE 1.98). Our results suggests that (1) Φ 2 light signals can be used to predict net photosynthesis rate with high accuracy; (2) a parameterized photosynthetic electron transport rate model is suitable predicting measured electron transport rate ( J ) and A L . The system can be used as decision support system (DSS) for plant and crop performance monitoring when leaf-dynamics are up-scaled to the plant or crop level.
Why it matches plant phenotyping methods葉のΦ2測定とモデル化により光合成速度・電子伝達速度をリアルタイム推定する監視システムを開発・評価しており、植物生理形質の取得手法が研究の中心である。
abstractcreate a simple and reliable method for real-time prediction of A L with continuously Φ 2 measurements
Reproduction assets foundThe paper's measured phenotyping data (leaf CO2 assimilation, chlorophyll fluorescence Φ2, and greenhouse environmental variables from the tomato crop) are stated to be included in the article's Supplementary Material (Supplementary Material A–B), publicly accessible at the Frontiers supplementary-material URL. No codeDataset · publicconstrued as a potential conflict of interest.
Acknowledgments
The authors thank the financial support from the program of China Scholarships Council for the first author and Wolfgang Pfeiffer for the technique support with the BERMONIS.
Supplementary Material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2020.01038/full#supplementary-material
Click here for additional data file.
Click here for additional data file.
Click here for additional data file.
References
Aggarwal C., Yu S. (2005). An effective and efficient algorithm for high-dimensional outlier detection. VLDB J.
14, 211–221.
Allen J. F. (2003). Cyclic, pseudocOpen asset ↗lines:575-613Code / dataset availability confirmedOpenAlex · checked 13 Sept 2026
Abstract Remote sensing of solar‐induced chlorophyll fluorescence (SIF) offers potential to infer photosynthesis across scales and biomes. Many retrieval methods have been developed to estimate top‐of‐canopy SIF using ground‐based spectroscopy. However, inconsistencies among methods may confound interpretation of SIF dynamics, eco‐physiological/environmental drivers, and its relationship with photosynthesis. Using high temporal‐ and spectral resolution ground‐based spectroscopy, we aimed to (1) evaluate performance of SIF retrieval methods under diverse sky conditions using continuous field measurements; (2) assess method sensitivity to fluctuating light, reflectance, and fluorescence emission spectra; and (3) inform users for optimal ground‐based SIF retrieval. Analysis included field measurements from bi‐hemispherical and hemispherical‐conical systems and synthetic upwelling radiance constructed from measured downwelling radiance, simulated reflectance, and simulated fluorescence for benchmarking. Fraunhofer‐based differential optical absorption spectroscopy (DOAS) and singular vector decomposition (SVD) retrievals exhibit convergent SIF‐PAR relationships and diurnal consistency across different sky conditions, while O2A‐based spectral fitting method (SFM), SVD, and modified Fraunhofer line discrimination (3FLD) exhibit divergent SIF‐PAR relationships across sky conditions. Such behavior holds across system configurations, though hemispherical‐conical systems diverge less across sky conditions. O2A retrieval accuracy, influenced by atmospheric distortion, improves with a narrower fitting window and when training SVD with temporally local spectra. This may impact SIF‐photosynthesis relationships interpreted by previous studies using O2A‐based retrievals with standard (759–767.76 nm) fitting windows. Fraunhofer‐based retrievals resist atmospheric impacts but are noisier and more sensitive to assumed SIF spectral shape than O2A‐based retrievals. We recommend SVD or SFM using reduced fitting window (759.5–761.5 nm) for robust far‐red SIF retrievals across sky conditions.
Why it matches plant phenotyping methods高頻度フィールド分光による植物キャノピーの蛍光・光合成関連状態の取得法を、複数のSIF検索手法について系統的に評価・ベンチマークしており、フェノタイピング手法の技術的検証が中心である。
abstractevaluate performance of SIF retrieval methods under diverse sky conditions using continuous field measurements
Reproduction assets foundThe paper's field spectroscopy data (PhotoSpec and bi-hemispherical system) and SIF retrieval code are explicitly stated to be publicly available at Caltech, Cornell, and GitHub repositories with DOIs.Dataset · publicthe PhotoSpec data used in this study is publicly available
at a data repository hosted at the California Institute of Technology
(https://data.caltech.edu/records/1226) and associated with DOI 10.22002/D1.1226.Open asset ↗data.caltech.edu · 10.22002/D1.1226lines:4420-4536Dataset · publicData from
the bi-hemispherical system is publicly available at a data repository hosted by Cornell
University (https://ecommons.cornell.edu/handle/1813/69711) and associated with DOI
10.7298/wqx5-ba07.Open asset ↗ecommons.cornell.edu · 10.7298/wqx5-ba07lines:4420-4536Code · publicCode used for SIF retrievals can be found on Github
(https://github.com/SunCornell/SIF retrieval methods) and is associated with DOI
10.5281/zenodo.3759965.Open asset ↗github.com/SunCornell/SIF · 10.5281/zenodo.3759965lines:4420-4536Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Crop improvement is crucial to ensuring global food security under climate change, and hence there is a pressing need for phenotypic observations that are both high throughput and improve mechanistic understanding of plant responses to environmental cues and limitations. In this study, chlorophyll a fluorescence light response curves and gas-exchange observations are combined to test the photosynthetic response to moderate drought in four genotypes of Brassica rapa The quantum yield of PSII ( ϕ PSII ) is here analyzed as an exponential decline under changing light intensity and soil moisture. Both the maximum ϕ PSII and the rate of ϕ PSII decline across a large range of light intensities (0-1,000 μmol photons m -2 s -1 ; β PSII ) are negatively affected by drought. We introduce an alternative photosynthesis model ( β PSII model) incorporating parameters from rapid fluorescence response curves. Specifically, the model uses β PSII as an input for estimating the photosynthetic electron transport rate, which agrees well with two existing photosynthesis models (Farquhar-von Caemmerer-Berry and Yin). The β PSII model represents a major improvement in photosynthesis modeling through the integration of high-throughput fluorescence phenotyping data, resulting in gained parameters of high mechanistic value.
Why it matches plant phenotyping methods高速クロロフィル蛍光フェノタイピングデータを用いた光合成モデルを新規に構築し、既存モデルと比較検証しており、表現型取得・解析手法が研究の中心である。
abstractWe introduce an alternative photosynthesis model ( β PSII model) incorporating parameters from rapid fluorescence response curves.
Reproduction assets foundThe paper's phenotyping measurements are publicly available via two PhotosynQ projects (chlorophyll fluorescence and ECS protocols/data for the B. rapa drought experiment), and the authors' analysis code for the βPSII decline model and three photosynthesis models is publicly hosted on the first author's GitHub.Code · publicThe code for all three photosynthesis models as well as the simple β PSII decline model are available at https://github.com/jrpleban/ .Open asset ↗jrplebanlines:556-568Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Autophagy is the main catabolic process in eukaryotes and plays a key role in cell homeostasis. In vivo measurement of autophagic activity (flux) is a powerful tool for investigating the role of the pathway in organism development and stress responses. Here we describe a significant optimization of the tandem tag assay for detection of autophagic flux in planta in epidermal root cells of Arabidopsis thaliana seedlings. The tandem tag consists of TagRFP and mWasabi fluorescent proteins fused to ATG8a, and is expressed in wildtype or autophagy-deficient backgrounds to obtain reporter and control lines, respectively. Upon autophagy activation, the TagRFP-mWasabi-ATG8a fusion protein is incorporated into autophagosomes and delivered to the lytic vacuole. Ratiometric quantification of the low pH-tolerant TagRFP and low pH-sensitive mWasabi fluorescence in the vacuoles of control and reporter lines allows for a reliable estimation of autophagic activity. We provide a step by step protocol for plant growth, imaging and semi-automated data analysis. The protocol presents a rapid and robust method that can be applied for any studies requiring in planta quantification of autophagic flux.
Why it matches plant phenotyping methods植物体内のオートファジー活性という生理状態を、蛍光イメージングと半自動解析で定量する手法を最適化し、プロトコルとして提示しているため。
abstractHere we describe a significant optimization of the tandem tag assay for detection of autophagic flux in planta in epidermal root cells of Arabidopsis thaliana seedlings.
Reproduction assets foundThe paper's semi-automated autophagic flux analysis pipeline (ImageJ macros and R scripts) is publicly available in the authors' AuTToFlux GitHub repository, which also contains demo data for validating the analysis.Code · public20-22 °C, 50-70% humidity, 150 µM light
Confocal Laser Scanning Microscope (CLSM; Zeiss, LSM 800)
Software
Fiji, the version of ImageJ with included set of plugins ( https://fiji.sc/ , for this study, we utilized versions 1.51s and 2.0.0-rc-69/1.52i).
AuTToFlux repository containing three ImageJ macro and three R script files ( https://github.com/jonasoh/AuTToFlux/archive/master.zip ):
CalibrateThreshold.ijm
ImageProcessor.ijm
FluorescenceIntensity.ijm
EvaluateCalibration.R
Control-vs-Reporter.R
Flux-vs-Time.R
R ( https://www.r-project.org , we used 3.5.2 and 3.5.1)
RStudio ( https://www.rstudio.com/ , we used versions 1.1.453 and 1.2.1186).
Git ( https://git-scm.com/downloads , we usedOpen asset ↗jonasoh/AuTToFluxlines:121-191Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Miscanthus x giganteus (Mxg) is a promising second-generation biofuel crop with high production of energetic biomass. Our aim was to determine the level of plant stress of Mxg grown in poor quality soils using non-invasive physiological parameters and to test whether the stress could be reduced by application of plant growth regulators (PGRs). Plant fitness was quantified by measuring of leaf fluorescence using 24 indexes to select the most suitable fluorescence indicators for quantification of this type of abiotic stress. Simultaneously, visible stress signs were observed on stems and leaves and differences in variants were revealed also by microscopy of leaf sections. Leaf fluorescence analysis, visual observation and changes of leaf anatomy revealed significant stress in all studied subjects compared to those cultivated in good quality soil. Besides commonly used Fv/Fm (potential photosynthetic efficiency) and P.I. (performance index), which showed very low sensitivity, we suggest other fluorescence parameters (like dissipation, DIo/RC) for revealing finer differences. We can conclude that measurement of leaf fluorescence is a suitable method for revealing stress affecting Mxg in poor soils. However, none of investigated parameters proved significant positive effect of PGRs on stress reduction. Therefore, direct improvement of soil quality by fertilization should be considered for stress reduction and improving the biomass quality in this type of soils.
Why it matches plant phenotyping methods葉の蛍光指標を用いた非侵襲的ストレス定量と指標選定が研究目的の中心であり、植物の生理状態を測定するフェノタイピング手法の適用・検証に該当する。
abstractOur aim was to determine the level of plant stress of Mxg grown in poor quality soils using non-invasive physiological parameters
Reproduction assets foundThe paper's supplementary materials hosted on MDPI contain the paper-specific fluorescence index measurements (Table S1 means/SDs for all PGR concentrations, boxplots, experiment photos, climate data), which directly reproduce this study's plant-phenotyping measurements. No author analysis code or trained models are deSupplement · publics established that application of PGRs Stimpo and Regoplant did not reduce the stress level of Mxg, the direct improvement of soil shall be considered for stress reduction.
Acknowledgments
We would like to thank Agrobiotech for providing us with Stimpo and Regoplant.
Supplementary Materials
The following are available online at https://www.mdpi.com/2223-7747/9/2/194/s1 , Table S1: Means and standard deviations of fluorescence indexes for all PGRs concentrations in experiment; Figure S2: Boxplots of fluorescence indexes; Figure S3: Photograph of the experiment; Figure S4: Average month temperatures, precipitation and light period in Ústí nad Labem in 2017.
Click here for additional data file.Open asset ↗lines:96-146Code / dataset availability confirmedEurope PMC · OpenAlex · Crossref · bioRxiv · checked 14 Sept 2026
Background Over the last years, several plant science labs have started to employ fluctuating growth light conditions to simulate natural light regimes more closely. Many plant mutants reveal quantifiable effects under fluctuating light despite being indistinguishable from wild-type plants under standard constant light. Moreover, many subtle plant phenotypes become intensified and thus can be studied in more detail. This observation has caused a paradigm shift within the photosynthesis research community and an increasing number of scientists are interested in using fluctuating light growth conditions. However, high installation costs for commercial controllable LED setups as well as costly phenotyping equipment can make it hard for small academic groups to compete in this emerging field. Results We show a simple do-it-yourself approach to enable fluctuating light growth experiments. Our results using previously published fluctuating light sensitive mutants, stn7 and pgr5 , confirm that our low-cost setup yields similar results as top-prized commercial growth regimes. Moreover, we show how we increased the throughput of our Walz IMAGING-PAM, also found in many other departments around the world. We have designed a Python and R-based open source toolkit that allows for semi-automated sample segmentation and data analysis thereby reducing the processing bottleneck of large experimental datasets. We provide detailed instructions on how to build and functionally test each setup. Conclusions With material costs well below USD$1000, it is possible to setup a fluctuating light rack including a constant light control shelf for comparison. This allows more scientists to perform experiments closer to natural light conditions and contribute to an emerging research field. A small addition to the IMAGING-PAM hardware not only increases sample throughput but also enables larger-scale plant phenotyping with automated data analysis.
Why it matches plant phenotyping methods低コストの生育環境、IMAGING-PAMのスループット向上、植物画像の半自動セグメンテーションとデータ解析を開発・検証しており、植物表現型取得手法が中心です。
abstractWe have designed a Python and R-based open source toolkit that allows for semi-automated sample segmentation and data analysis thereby reducing the processing bottleneck of large experimental datasets.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe scripts described in the text can be downloaded from
https://github.com/CougPhenomics/ImagingPAMProcessing and the accompanying 11 day
dataset can be downloaded from https://doi.org/10.17605/OSF.IO/P32AYOpen asset ↗OSF · 10.17605/OSF.IO/P32AYpdf-page:13 lines:1-51Code / dataset availability confirmedEurope PMC · Crossref · OpenAlex · checked 9 Sept 2026
With the introduction of multi-camera systems in modern plant phenotyping new opportunities for combined multimodal image analysis emerge. Visible light (VIS), fluorescence (FLU) and near-infrared images enable scientists to study different plant traits based on optical appearance, biochemical composition and nutrition status. A straightforward analysis of high-throughput image data is hampered by a number of natural and technical factors including large variability of plant appearance, inhomogeneous illumination, shadows and reflections in the background regions. Consequently, automated segmentation of plant images represents a big challenge and often requires an extensive human-machine interaction. Combined analysis of different image modalities may enable automatisation of plant segmentation in "difficult" image modalities such as VIS images by utilising the results of segmentation of image modalities that exhibit higher contrast between plant and background, i.e. FLU images. For efficient segmentation and detection of diverse plant structures (i.e. leaf tips, flowers), image registration techniques based on feature point (FP) matching are of particular interest. However, finding reliable feature points and point pairs for differently structured plant species in multimodal images can be challenging. To address this task in a general manner, different feature point detectors should be considered. Here, a comparison of seven different feature point detectors for automated registration of VIS and FLU plant images is performed. Our experimental results show that straightforward image registration using FP detectors is prone to errors due to too large structural difference between FLU and VIS modalities. We show that structural image enhancement such as background filtering and edge image transformation significantly improves performance of FP algorithms. To overcome the limitations of single FP detectors, combination of different FP methods is suggested. We demonstrate application of our enhanced FP approach for automated registration of a large amount of FLU/VIS images of developing plant species acquired from high-throughput phenotyping experiments.
Why it matches plant phenotyping methods植物フェノタイピング用のVIS/FLU画像登録について、特徴点検出器を比較し、前処理と組合せ手法を評価する方法開発・検証研究であり、手法が中心的です。
abstractHere, a comparison of seven different feature point detectors for automated registration of VIS and FLU plant images is performed.
Reproduction assets foundThe authors publicly release example multimodal FLU/VIS plant images (original and manually segmented) together with a pre-compiled GUI demo tool implementing their FP registration analysis, via a dedicated IPK project page and a GitHub repository.Code · publicA precompilied GUI tool demonstrating the peformance of different FP algorithms can be downloaded along with examples of multimodal plant images from https://github.com/ba-ipk/fpRegOpen asset ↗ba-ipk/fpReglines:261-304Dataset · publicExamples of original (unfiltered) and manually segmented plant images along with the demo software are available from our project/paper dedicated page: http://ag-ba.ipk-gatersleben.de/fpreg.htmlOpen asset ↗lines:145-169Code / dataset availability confirmedEurope PMC · checked 9 Sept 2026
Background As yields of major crops such as wheat ( T. aestivum ) have begun to plateau in recent years, there is growing pressure to efficiently phenotype large populations for traits associated with genetic advancement in yield. Photosynthesis encompasses a range of steady state and dynamic traits that are key targets for raising Radiation Use Efficiency (RUE), biomass production and grain yield in crops. Traditional methodologies to assess the full range of responses of photosynthesis, such a leaf gas exchange, are slow and limited to one leaf (or part of a leaf) per instrument. Due to constraints imposed by time, equipment and plant size, photosynthetic data is often collected at one or two phenological stages and in response to limited environmental conditions. Results Here we describe a high throughput procedure utilising chlorophyll fluorescence imaging to phenotype dynamic photosynthesis and photoprotection in excised leaves under controlled gaseous conditions. When measured throughout the day, no significant differences ( P > 0.081) were observed between the responses of excised and intact leaves. Using excised leaves, the response of three cultivars of T. aestivum to a user-defined dynamic lighting regime was examined. Cultivar specific differences were observed for maximum PSII efficiency ( F v '/ F m '- P F q '/ F m '- P = 0.04) under both low and high light. In addition, the rate of induction and relaxation of non-photochemical quenching (NPQ) was also cultivar specific. A specialised imaging chamber was designed and built in-house to maintain gaseous conditions around excised leaf sections. The purpose of this is to manipulate electron sinks such as photorespiration. The stability of carbon dioxide (CO 2 ) and oxygen (O 2 ) was monitored inside the chambers and found to be within ± 4.5% and ± 1% of the mean respectively. To test the chamber, T. aestivum 'Pavon76' leaf sections were measured under at 20 and 200 mmol mol -1 O 2 and ambient [CO 2 ] during a light response curve. The F v '/ F m 'was significantly higher ( P 2 ] for the majority of light intensities while values of NPQ and the proportion of open PSII reaction centers (qP) were significantly lower under > 130 μmol m -2 s -1 photosynthetic photon flux density (PPFD). Conclusions Here we demonstrate the development of a high-throughput (> 500 samples day -1 ) method for phenotyping photosynthetic and photo-protective parameters in a dynamic light environment. The technique exploits chlorophyll fluorescence imaging in a specifically designed chamber, enabling controlled gaseous environment around leaf sections. In addition, we have demonstrated that leaf sections do not different from intact plant material even > 3 h after sampling, thus enabling transportation of material of interest from the field to this laboratory based platform. The methodologies described here allow rapid, custom screening of field material for variation in photosynthetic processes.
Why it matches plant phenotyping methods葉緑素蛍光イメージングと専用チャンバーを用いた高スループットな光合成・光防御形質の取得法を開発し、葉およびチャンバー条件を検証しているため、植物フェノタイピング手法が中心である。
abstractHere we describe a high throughput procedure utilising chlorophyll fluorescence imaging to phenotype dynamic photosynthesis and photoprotection in excised leaves under controlled gaseous conditions.
Reproduction assets foundThe paper's phenotyping pipeline (chlorophyll fluorescence imaging of excised wheat leaves in custom gas-controlled chambers) is supported by a paper-specific public asset: Additional file 2, a ZIP supplement containing the CAD files, printer settings, and construction notes for the custom imaging chambers, explicitly'Supplement · publicThe CAD files for the final chamber design are fully available with this manuscript (Additional file 2 ) including printer settings and additional notes, so that users can either print their own, outsource the printing or modify the designs.Open asset ↗lines:94-102Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
-Solar-induced chlorophyll a Fluorescence (SIF), which is distributed over a relatively broad (~200 nm) spectral range, is a signal intricately connected to the efficiency of photosynthesis and is now observable from space. Variants of the Fraunhofer Line Depth/Discriminator (FLD) method are used as the basis of retrieval algorithms for estimating SIF from space. Although typically unobserved directly, recent advances in FLD-based algorithms now facilitate the prediction (by model inversion) of the canopy emitted fluorescence spectrum from the discrete-feature FLD retrievals.-Here we present first canopy scale measurements of chlorophyll a fluorescence spectra emitted from Scots pine at two times of year, and also from a lingonberry dominated understory. We used a high power multispectral Light Emitting Diode (LED) array to illuminate the respective canopies at night and measured under standardised conditions using a field spectrometer mounted in the nadir position above the canopy. We refer to the technique, which facilitates the in situ upscaling of a commonly measured leaf scale quantity to the canopy, as nocturnal LED-Induced chlorophyll a Fluorescence (LEDIF).-The shape of the LEDIF spectra was dependant on the colour of the excitation light and also on the dominant species. Because we measured pine at two different times of year we were also able to show an increase in the canopy scale apparent quantum yield of fluorescence which was consistent with leaf-level increase in fluorescence yield recorded with a monitoring PAM fluorometer.-The automation of the LEDIF technique could be used to estimate seasonal changes in canopy fluorescence spectra and yield from fixed or mobile platforms and provide a window into functional traits across species and architectures. LEDIF could also be used to evaluate FLD and inversion-based retrievals of canopy spectra, as well as different irradiance normalisation schemes typically applied to SIF data to account for the dependence of SIF on ambient light conditions.
Why it matches plant phenotyping methods植物キャノピーのクロロフィル蛍光スペクトルと見かけの量子収率を測定する新規LEDIF手法を開発・実証しており、植物の生理形質取得が研究の中心である。
abstractHere we present first canopy scale measurements of chlorophyll a fluorescence spectra emitted from Scots pine at two times of year, and also from a lingonberry dominated understory.
Reproduction assets foundThe paper's LEDIF fluorescence spectra and analysis code are not stated to be publicly available. The only qualifying public asset is the SMARTSMEAR database, from which the authors downloaded the site PAR and temperature measurements used in the study; it is a public, paper-relevant data source with an explicit URL,但它Dataset · publicAcross Space and Time (FAST2017) campaign, at
the Station for Measuring Atmosphere-Ecosystem Relations II
(SMEARII), Hyytiälä, Finland (61°51N, 24°17E). Site measurements of
above canopy photosynthetically active radiation (PAR) and in canopy
(16.8 m) temperature were downloaded from the publicly accessible
SMARTSMEAR database (https://avaa.tdata.fi/web/smart).2.2. Canopy spectral measurements
Canopy scale steady state chlorophyll a fluorescence spectra were
excited at night using a multispectral LED light source (BPP210 Beamz
Professional, distributed by Tronios BV, Twente, Netherlands) from a
scaffold tower at a height of approximately 0.5 m above a mature 15 m
tall Scots pine treeOpen asset ↗SMARTSMEARpdf-raw-page:2 lines:72-128Code / dataset availability confirmedOpenAlex · checked 13 Sept 2026
Retrieval of Sun-Induced Chlorophyll Fluorescence (F) spectrum is one of the challenging perspectives for further advancing F studies towards a better characterization of vegetation structure and functioning. In this study, a simplified Spectral Fitting retrieval algorithm suitable for retrieving the F spectrum with a limited number of parameters is proposed (two parameters for F). The novel algorithm is developed and tested on a set of radiative transfer simulations obtained by coupling SCOPE and MODTRAN5 codes, considering different chlorophyll content, leaf area index and noise levels to produce a large variability in fluorescence and reflectance spectra. The retrieval accuracy is quantified based on several metrics derived from the F spectrum (i.e., red and far-red peaks, O2 bands and spectrally-integrated values). Further, the algorithm is employed to process experimental field spectroscopy measurements collected over different crops during a long-lasting field campaign. The reliability of the retrieval algorithm on experimental measurements is evaluated by cross-comparison with F values computed by an independent retrieval method (i.e., SFM at O2 bands). For the first time, the evolution of the F spectrum along the entire growing season for a forage crop is analyzed and three diverse F spectra are identified at different growing stages. The results show that red F is larger for young canopy; while red and far-red F have similar intensity in an intermediate stage; finally, far-red F is significantly larger for the rest of the season.
Why it matches plant phenotyping methods作物群落の蛍光スペクトルから植物の生理状態を推定する検索アルゴリズムを開発し、シミュレーションと圃場分光測定で精度・信頼性を検証しているため、植物フェノタイピング手法が中心です。
abstracta simplified Spectral Fitting retrieval algorithm suitable for retrieving the F spectrum with a limited number of parameters is proposed
Reproduction assets foundThe paper's spectral fitting (SpecFit) retrieval algorithm is the core computational analysis of this study, and the authors explicitly state its Matlab source code is publicly available via a GitLab repository. No phenotype datasets or field measurement data are stated as publicly deposited.Code · publicThe Matlab source code of the present algorithm is available for
download through the git repository https://gitlab.com/ltda/flox-specfit.Open asset ↗gitlab.com/ltda/flox-specfitpdf-page:6 lines:1-108Code / dataset availability confirmedEurope PMC · OpenAlex · checked 10 Sept 2026
With the introduction of high-throughput multisensory imaging platforms, the automatization of multimodal image analysis has become the focus of quantitative plant research. Due to a number of natural and technical reasons (e.g., inhomogeneous scene illumination, shadows, and reflections), unsupervised identification of relevant plant structures (i.e., image segmentation) represents a nontrivial task that often requires extensive human-machine interaction. Registration of multimodal plant images enables the automatized segmentation of 'difficult' image modalities such as visible light or near-infrared images using the segmentation results of image modalities that exhibit higher contrast between plant and background regions (such as fluorescent images). Furthermore, registration of different image modalities is essential for assessment of a consistent multiparametric plant phenotype, where, for example, chlorophyll and water content as well as disease- and/or stress-related pigmentation can simultaneously be studied at a local scale. To automatically register thousands of images, efficient algorithmic solutions for the unsupervised alignment of two structurally similar but, in general, nonidentical images are required. For establishment of image correspondences, different algorithmic approaches based on different image features have been proposed. The particularity of plant image analysis consists, however, of a large variability of shapes and colors of different plants measured at different developmental stages from different views. While adult plant shoots typically have a unique structure, young shoots may have a nonspecific shape that can often be hardly distinguished from the background structures. Consequently, it is not clear a priori what image features and registration techniques are suitable for the alignment of various multimodal plant images. Furthermore, dynamically measured plants may exhibit nonuniform movements that require application of nonrigid registration techniques. Here, we investigate three common techniques for registration of visible light and fluorescence images that rely on finding correspondences between (i) feature-points, (ii) frequency domain features, and (iii) image intensity information. The performance of registration methods is validated in terms of robustness and accuracy measured by a direct comparison with manually segmented images of different plants. Our experimental results show that all three techniques are sensitive to structural image distortions and require additional preprocessing steps including structural enhancement and characteristic scale selection. To overcome the limitations of conventional approaches, we develop an iterative algorithmic scheme, which allows it to perform both rigid and slightly nonrigid registration of high-throughput plant images in a fully automated manner.
Why it matches plant phenotyping methods植物のマルチモーダル画像登録アルゴリズムを比較・検証し、高スループット画像から一貫した表現型解析を可能にする手法を開発しているため。
abstractHere, we investigate three common techniques for registration of visible light and fluorescence images
Reproduction assets foundThe authors provide a public GUI software tool (mPIR) implementing the paper's FP/PC/INT multimodal plant image registration algorithms, together with example FLU/VIS/NIR plant images from the study, downloadable from their homepage.Code · publica GUI software tool with examples of plant images is provided for direct download from our homepage; Footnote 1 a screen shot is shown in Fig. 10Open asset ↗lines:138-172Dataset · publicExamples of FLU, VIS and NIR plant images are included in our online file repository.Open asset ↗lines:138-172Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
Direct observation of morphological plant traits is tedious and a bottleneck for high-throughput phenotyping. Hence, interest in image-based analysis is increasing, with the requirement for software that can reliably extract plant traits, such as leaf count, preferably across a variety of species and growth conditions. However, current leaf counting methods do not work across species or conditions and therefore may lack broad utility. In this paper, we present Pheno-Deep Counter, a single deep network that can predict leaf count in two-dimensional (2D) plant images of different species with a rosette-shaped appearance. We demonstrate that our architecture can count leaves from multi-modal 2D images, such as visible light, fluorescence and near-infrared. Our network design is flexible, allowing for inputs to be added or removed to accommodate new modalities. Furthermore, our architecture can be used as is without requiring dataset-specific customization of the internal structure of the network, opening its use to new scenarios. Pheno-Deep Counter is able to produce accurate predictions in many plant species and, once trained, can count leaves in a few seconds. Through our universal and open source approach to deep counting we aim to broaden utilization of machine learning-based approaches to leaf counting. Our implementation can be downloaded at https://bitbucket.org/tuttoweb/pheno-deep-counter.
Why it matches plant phenotyping methods植物画像から葉数を抽出する汎用深層学習手法を開発しており、植物フェノタイピング手法が研究の中心である。
abstractwe present Pheno-Deep Counter, a single deep network that can predict leaf count in two-dimensional (2D) plant images of different species with a rosette-shaped appearance.
Reproduction assets foundThe authors explicitly deposit their Pheno-Deep Counter source code and pre-trained model in a public Bitbucket repository; the plant image datasets used (CVPPP, Cruz et al., komatsuna, Aberystwyth) are cited prior-work datasets rather than paper-specific deposits.Code · publicinput/modalities without changing the overall architecture. This simplifies adoption and permits the sharing of model updates when new experiments have been made available on the basis of our architecture. Therefore, by placing our pre‐trained PhenoDC and source code (and instructions) into the publicly available repository at https://bitbucket.org/tuttoweb/pheno-deep-counter , we hope to accelerate the adoption of such methods in plant phenotyping analysis.Open asset ↗https://bitbucket.org/tuttoweb/pheno-deep-counterlines:340-387Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Accurate estimation of terrestrial photosynthesis has broad scientific and societal impacts. Measurements of photosynthesis can be used to assess plant health, quantify crop yield, and determine the largest CO₂ flux in the carbon cycle. Long-term and continuous monitoring of vegetation optical properties can provide valuable information about plant physiology. Recent developments of the remote sensing of solar-induced chlorophyll fluorescence (SIF) and vegetation spectroscopy have shown promising results in using this information to quantify plant photosynthetic activities and stresses at the ecosystem scale. However, there are few automated systems that allow for unattended observations over months to years. Here we present FluoSpec 2, an automated system for collecting irradiance and canopy radiance that has been deployed in various ecosystems in the past years. The instrument design, calibration, and tests are recorded in detail. We discuss the future directions of this field spectroscopy system. A network of SIF sensors, FluoNet, is established to measure the diurnal and seasonal variations of SIF in several ecosystems. Automated systems such as FluoSpec 2 can provide unique information on ecosystem functioning and provide important support to the satellite remote sensing of canopy photosynthesis.
Why it matches plant phenotyping methodsFluoSpec 2は植物キャノピーのSIF・光学特性を継続取得する自動センサーシステムであり、装置設計、校正、試験が論文の中心です。植物の光合成・生理状態を測定するフェノタイピング基盤に該当します。
abstractHere we present FluoSpec 2, an automated system for collecting irradiance and canopy radiance
Reproduction assets foundThe paper's acknowledgments explicitly state that source codes used to control the FluoSpec 2 system and for postprocessing are publicly available at two GitHub repositories (persl/SeaBreeze and zhangyaonju/seabreeze_control), both of which are in the allowed URL list. These are authors' public code assets directly支撑该仪Code · publicDong Yan, Xian Wang, and Matt Dannenberg for the help with the installation of FluoSpec 2. We also thank Christian Frankenberg, Ari Kornfeld, Joe Berry, Troy Magney, Lianhong Gu, and Jochen Stutz for providing important and useful feedbacks. Source codes that are used to control the system and for postprocesing can be found in https://github.com/persl/SeaBreeze and https://github.com/zhangyaonju/seabreeze_control .
Author Contributions
X.Y. designed the FluoSpec 2 system. X.Y., H.S., A.S. designed all the tests of FluoSpec 2 and installed three FluoSpec 2. All authors contributed to the improvement of FluoSpec 2 and the writing and editing of the manuscript.
FundingOpen asset ↗persl/SeaBreezelines:139-146Code · publicrg for the help with the installation of FluoSpec 2. We also thank Christian Frankenberg, Ari Kornfeld, Joe Berry, Troy Magney, Lianhong Gu, and Jochen Stutz for providing important and useful feedbacks. Source codes that are used to control the system and for postprocesing can be found in https://github.com/persl/SeaBreeze and https://github.com/zhangyaonju/seabreeze_control .
Author Contributions
X.Y. designed the FluoSpec 2 system. X.Y., H.S., A.S. designed all the tests of FluoSpec 2 and installed three FluoSpec 2. All authors contributed to the improvement of FluoSpec 2 and the writing and editing of the manuscript.
FundingOpen asset ↗zhangyaonju/seabreeze_controllines:139-146Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Background The formation of crossovers during meiosis is pivotal for the redistribution of traits among the progeny of sexually reproducing organisms. In plants the molecular mechanisms underlying the formation of crossovers have been well established, but relatively little is known about the factors that determine the exact location and the frequency of crossover events in the genome. In the model plant species Arabidopsis , research on these factors has been greatly facilitated by reporter lines containing linked fluorescence marker genes under control of promoters active in seeds or pollen, allowing for the visualization of crossover events by fluorescence microscopy. However, the usefulness of these reporter lines to screen for novel modulators of crossover frequency in a high throughput manner relies on the availability of programs that can accurately count fluorescent seeds. Such a program was previously not available in scientific literature. Results Here we present MeioSeed, a novel CellProfiler-based program that accurately counts GFP and RFP fluorescent Arabidopsis seeds with adjustable detection thresholds for fluorescence intensity, making use of a robust seed classifier which was trained by machine learning in Ilastik. Using the previously published reporter line Col3-4/20 as an example, we explain the use of MeioSeed and the steps taken to optimize the thresholding settings of the program to fit the published model for recombination frequency and transgene segregation. The use of MeioSeed is illustrated by investigating salt stress as a novel abiotic trigger for changes in crossover frequency in Col3-4/20 (♂) × Ler-0 (♀) F 1 hybrids. Salt stress was found to trigger increases in crossover frequency between the marker genes of up to 70% compared to the control treatment without salt stress. Genotyping of control and salt treated populations revealed that the changes in crossover frequency were not limited to the region between the marker genes, but that fluctuations in crossover frequency are likely to occur genome-wide after treatment with high salt concentrations. Conclusions MeioSeed allows for the high throughput recognition and counting of fluorescent Arabidopsis seeds and can facilitate the screening for novel abiotic and biotic modulators of crossover frequency using reporter lines in Arabidopsis .
Why it matches plant phenotyping methods蛍光種子を機械学習・画像解析で高スループットに認識・計数し、交差頻度という植物の遺伝的状態を推定するソフトウェア開発が中心であるため。
abstractHere we present MeioSeed, a novel CellProfiler-based program that accurately counts GFP and RFP fluorescent Arabidopsis seeds with adjustable detection thresholds for fluorescence intensity, making use of a robust seed classifier which was trained by machine learning in Ilastik.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe MeioSeed package is available at http://cellprofiler.org/examples/published_pipelines .Open asset ↗lines:44-51Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Agronomists have used statistical crop models to predict yield on a genotype-by-genotype basis. Mechanistic models, based on fundamental physiological processes common across plant taxa, will ultimately enable yield prediction applicable to diverse genotypes and crops. Here, genotypic information is combined with multiple mechanistically based models to characterize photosynthetic trait differentiation among genotypes of Brassica rapa . Infrared leaf gas exchange and chlorophyll fluorescence observations are analyzed using Bayesian methods. Three advantages of Bayesian approaches are employed: a hierarchical model structure, the testing of parameter estimates with posterior predictive checks and a multimodel complexity analysis. In all, eight models of photosynthesis are compared for fit to data and penalized for complexity using deviance information criteria (DIC) at the genotype scale. The multimodel evaluation improves the credibility of trait estimates using posterior distributions. Traits with important implications for yield in crops, including maximum rate of carboxylation ( V cmax ) and maximum rate of electron transport ( J max ) show genotypic differentiation. B. rapa shows phenotypic diversity in causal traits with the potential for genetic enhancement of photosynthesis. This multimodel screening represents a statistically rigorous method for characterizing genotypic differences in traits with clear biophysical consequences to growth and productivity within large crop breeding populations with application across plant processes.
Why it matches plant phenotyping methods光合成形質を推定するマルチモデル・ベイズ統計手法が研究の中心であり、遺伝子型間の形質差を定量化・検証しているため。
titlePhenotypic Trait Identification Using a Multimodel Bayesian Method: A Case Study Using Photosynthesis in Brassica rapa Genotypes.
Reproduction assets foundThe paper's authors provide the model and implementation code used for the Bayesian photosynthesis phenotyping analysis in a public GitHub repository, explicitly stated in the text. No public phenotype dataset deposit is mentioned; the raw A/Ci curve data availability is not stated.Code · publicg a suite of eight models following this approach. The data, parameters, and predictions made by these eight models are described in Table 1 , with model equations identified in Table 2 . Each model has a coded name based on the assumptions therein (Table 3 ). The model and implementation codes used for analysis are provided at https://github.com/jrpleban/Bayes_Farquhar_Models_2_level_Hierarchy . Priors on parameters are shown in Table 4 . We have chosen to estimate some parameters often set as constants ( K c , K o ) to evaluate a given model's ability to discern traits expected to be conserved in this population. A literature survey for each parameter was used to provide statistical distriOpen asset ↗jrpleban/Bayes_Farquhar_Models_2_level_Hierarchylines:45-184Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
We present a high throughput crop physiology condition monitoring system and corresponding monitoring method. The monitoring system can perform large-area chlorophyll fluorescence imaging and multispectral imaging. The monitoring method can determine the crop current condition continuously and non-destructively. We choose chlorophyll fluorescence parameters and relative reflectance of multispectral as the indicators of crop physiological status. Using tomato as experiment subject, the typical crop physiological stress, such as drought, nutrition deficiency and plant disease can be distinguished by the monitoring method. Furthermore, we have studied the correlation between the physiological indicators and the degree of stress. Besides realizing the continuous monitoring of crop physiology, the monitoring system and method provide the possibility of machine automatic diagnosis of the plant physiology. Highlights: A newly designed high throughput crop physiology monitoring system and the corresponding monitoring method are described in this study. Different types of stress can induce distinct fluorescence and spectral characteristics, which can be used to evaluate the physiological status of plants.
Why it matches plant phenotyping methods植物の生理状態・ストレスをクロロフィル蛍光とマルチスペクトル画像から非破壊・連続的に推定する高スループット監視システムと手法が研究の中心であり、植物フェノタイピング手法に該当する。
abstractWe present a high throughput crop physiology condition monitoring system and corresponding monitoring method.
Reproduction assets foundThe paper's supplementary material publicly hosts the paper-specific phenotyping images: pseudo-color ΦPSII, Fv/Fm, and 550/510 parameter images and photos of tomato plants under drought, nitrogen deficiency, and Botrytis cinerea stress, plus a photo of the monitoring system. These are the plant images/phenotyping dataDataset · publicinterest.
Funding. This work was supported by the National High Technology Research, Development Program of China (863 Program) (Grant No. 2012AA10A503).
1
http://www.walz.com/
2
http://www.psi.cz/
3
http://www.hansatech-instruments.com/
Supplementary Material
The Supplementary Material for this article can be found online at: https://www.frontiersin.org/articles/10.3389/fpls.2018.00407/full#supplementary-material
FIGURE S1
The physiology monitoring system with chlorophyll fluorescence module and multispectral module (A,B) and the scene when the system is working (C) .
Click here for additional data file.
FIGURE S2
Φ PSII , F v / F m , and 550/510 pseudo color images and photos of tomatoes uOpen asset ↗lines:96-124Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Published28 Feb 2017Cytometry. Part A : the journal of the International Society for Analytical CytologyCited by 5 · OpenAlex ↗
Why it matches plant phenotyping methods植物プロトプラスト画像から薬剤による表現型変化を自動検出する画像解析・統計パイプラインを開発し、ハイコンテントスクリーニングに適用しており、表現型取得・抽出法が中心です。
abstractQuantitative image analysis procedures are necessary for the automated discovery of effects of drug treatment in large collections of fluorescent micrographs.
Reproduction assets foundThe paper's AVAILABILITY section states that a Reproducible Research Archive containing all raw data (the Arabidopsis protoplast fluorescence microscopy images), software, and processed results is publicly available from the authors' mur-phylab URL, which appears in the allowed URL list.Code · publicsoftware, and processed results is available from http://mur-phylab.cbd.cmu.edu/software.ACKNOWLEDGMENTS
We thank Dr. Armaghan Naik for helpful discussions, Dr.
Roland Nitschke for advice on microscopy, and Katja Rapp
for technical support.
LITERATURE CITED
1. Giuliano KA, De Biasio RL, Dunlay RT, Gough A, Volosky JM, Zock J, Pavlakis GN,
Taylor DL. High-content screening: A new approach to easing key bottlenecks in the
drug discoOpen asset ↗http://mur-phylab.cbd.cmu.edu/software.ACKNOWLEDGMENTSpdf-raw-page:9 lines:94-155Code / dataset availability confirmedEurope PMC · checked 14 Sept 2026
Plants are permanently exposed to rapidly changing environments, therefore it is evident that they had to evolve mechanisms enabling them to dynamically adapt to such fluctuations. Here we study how plants can be trained to enhance their photoprotection and elaborate on the concept of the short-term illumination memory in Arabidopsis thaliana. By monitoring fluorescence emission dynamics we systematically observe the extent of non-photochemical quenching (NPQ) after previous light exposure to recognise and quantify the memory effect. We propose a simplified mathematical model of photosynthesis that includes the key components required for NPQ activation, which allows us to quantify the contribution to photoprotection by those components. Due to its reduced complexity, our model can be easily applied to study similar behavioural changes in other species, which we demonstrate by adapting it to the shadow-tolerant plant Epipremnum aureum. Our results indicate that a basic mechanism of short-term light memory is preserved. The slow component, accumulation of zeaxanthin, accounts for the amount of memory remaining after relaxation in darkness, while the fast one, antenna protonation, increases quenching efficiency. With our combined theoretical and experimental approach we provide a unifying framework describing common principles of key photoprotective mechanisms across species in general, mathematical terms.
Why it matches plant phenotyping methodsNPQ蛍光動態を用いた植物の光防御状態の定量と、他種にも適用可能な数学モデルの開発が研究の中心であり、単なる生物学的 routine 測定ではない。
abstractBy monitoring fluorescence emission dynamics we systematically observe the extent of non-photochemical quenching (NPQ) after previous light exposure to recognise and quantify the memory effect.
Reproduction assets foundThe authors explicitly provide open-source code (the npqmodel repository) that reproduces all figures in the paper, including the simulations of the PAM fluorescence measurements. No separate public phenotype dataset deposit is stated (data extraction is referenced only vaguely as 'the database').Code · publiccode (available from https://github.com/QTB-HHU/npqmodel), with chlorophyll fluorescence quenching in spinach thylakoids from light treated orOpen asset ↗QTB-HHU/npqmodelpdf-page:9 lines:1-51