← Papers

Unverified paper record

Research on visualization of cotton canopy structure and extraction of feature parameters based on dual-perspective point cloud data

International Journal of Remote Sensing · 9 Aug 2024 · 10.1080/01431161.2024.2384099

Abstract

Cotton is one of the crops that requires the most time and labor. Precision agriculture technology is required for efficient management of cotton, and the identification of cotton attribute information in the field is a necessary and crucial step towards implementing precision agriculture. Unmanned aerial vehicles (UAVs) and Light Detection and Ranging (LiDAR) have evolved into essential instruments for plant phenotyping research. In this study, in order to address the demand for cotton attribute identification over wide areas in the field, an airborne LiDAR system was built based on LiDAR detection technology. This work acquired a dual-view point cloud of a cotton field in order to address the high density and low accuracy of the cotton point cloud attributes. Following pre-processing of the data, the point cloud was first coarsely regenerated using a combination of Fast Point Feature Histograms (FPFH) and Intrinsic Shape Signatures (ISS) techniques. The dual-view point cloud registration was then refined and finished using an Iterative Closest Point (ICP) algorithm. The height of the cotton plant was determined using the reconstructed point cloud of the cotton canopy, and a method combining Graham’s algorithm and the Alpha-Shape algorithm was suggested to determine the porosity of the cotton layers. The findings revealed that the root mean square errors (RMSE) between calculated and measured values of cotton plant height and stratified porosity were, respectively, 3.98 cm and 5.21%, and that their mean absolute percentage errors (MAPE) were 4.39% and 9.31%, with correlation coefficients (R2) of 0.951 and 0.762, respectively. On the whole, our study has demonstrated the effectiveness of the proposed method in terms of providing accurate and reliable cotton parameters in agriculture.

Plant phenotyping relevance

綿花キャノピーの点群取得・再構成・特徴量抽出手法を開発し、草高と層別空隙率を実測値と比較して検証しているため、植物フェノタイピング手法が中心である。

abstractIn this study, in order to address the demand for cotton attribute identification over wide areas in the field, an airborne LiDAR system was built based on LiDAR detection technology.
abstractThe height of the cotton plant was determined using the reconstructed point cloud of the cotton canopy, and a method combining Graham’s algorithm and the Alpha-Shape algorithm was suggested to determine the porosity of the cotton layers.
abstractThe findings revealed that the root mean square errors (RMSE) between calculated and measured values of cotton plant height and stratified porosity were, respectively, 3.98 cm and 5.21%

Code and data availability

公開本文の所在を確認できませんでした。非公開または購読が必要な可能性があります。

No evidence-backed public reproduction asset is currently recorded.

This is an automatically classified, unverified record. Curator approval is required before any resource enters the Catalog.