This study presents a systematic quantitative multi-elemental investigation of four major plant organs (roots, stems, leaves, and flowers) of Nerium oleander using calibration-based Laser-Induced Breakdown Spectroscopy (LIBS), with the results validated by Atomic Absorption Spectroscopy (AAS). Plasma characterization was carried out using Boltzmann plot and Stark broadening analyses, while negligible self-absorption observed through the Hα emission line confirmed optically thin plasma conditions and reliable quantitative measurements. A total of nine elements were detected, including Fe, Zn, Mn, Ca, Mg, K, Na, Cu, and Ni, each exhibiting different concentration levels across the analyzed tissues. Compositional analysis using standard calibration curve-based LIBS demonstrated that elemental concentrations were non-uniform, showing marked variations between the different plant tissues. Among the detected elements, calcium emerged as the most prevalent across all tissues. The highest calcium concentration was observed in leaves (16,385 mg L-1), followed by roots (12,092 mg L-1) and flowers (11,185 mg L-1). Root tissues exhibited elevated concentrations of Fe and Mn, reaching 1918 and 513 mg L-1, respectively. In contrast, flowers showed the highest Mn concentration (1888 mg L-1), while leaves were enriched in Mg (4445 mg L-1) and K (3700 mg L-1). The highest Na concentration was observed in stems (8025 mg L-1). Trace metals, including Cu, Zn, and Ni, were detected at comparatively low concentrations, while Pb remained undetected in all samples. The strong agreement between LIBS and AAS measurements confirms the reliability of the proposed methodology and demonstrates the potential of LIBS as a rapid and non-destructive tool for elemental assessment of medicinal plants.
Why it matches plant phenotyping methods植物組織の元素濃度を取得するLIBS測定法を校正し、AASで検証しており、元素組成という植物形質の測定方法が研究の中心である。
abstractusing calibration-based Laser-Induced Breakdown Spectroscopy (LIBS), with the results validated by Atomic Absorption Spectroscopy (AAS).
Accurate point-cloud segmentation of cotton organs is essential for precise phenotypic characterization. However, reliable instance segmentation of cotton bolls in field-derived point clouds remains challenging because foliage occlusion, contact between adjacent bolls and incomplete reconstruction obscure instance boundaries. Here we present RQ-PointNeXt, an end-to-end framework that directly maps input point clouds to boll instance masks within a unified trainable network. Built on PointNeXt, it incorporates relative-elevation geometric channel attention in the shallow encoder to fuse global channel context with elevation and surface-normal cues. Its Query–mask branch integrates semantic guidance, center-seeded queries and a center-aware mask prior to suppress background responses, localize instances and constrain mask extent. Hungarian matching and multitask optimization establish one-to-one query–instance assignments, whereas query-based decoding produces instance masks without external geometric clustering. We evaluated the framework on 226 field-grown cotton plants containing 720 annotated boll instances reconstructed from UAV multi-view imagery using neural radiance fields. On the held-out test set, overall accuracy, mean class accuracy and mean intersection over union reached 0.8942, 0.8980 and 0.8076, respectively. AP25, AP50 and AP75 were 0.7359, 0.5585 and 0.2777, yielding an mAP25/50/75 of 0.5240. The framework provides instance-level outputs for boll counting and spatial analysis in high-throughput field phenotyping.
Why it matches plant phenotyping methods綿花ボールの点群インスタンス分割を開発・評価し、計数や空間解析に利用可能な植物器官表現型を抽出する方法が中心である。
abstractHere we present RQ-PointNeXt, an end-to-end framework that directly maps input point clouds to boll instance masks within a unified trainable network.
Reproduction assets foundThe paper's own field cotton point-cloud dataset (226 plants, 720 annotated bolls) is only available upon request. However, the authors directly used the public UGA-BSAIL Cotton Plants with Foliage point-cloud dataset (with their added boll instance annotations) as an evaluation benchmark for RQ-PointNeXt, and it is公开发Dataset · publict to the pointwise overlap between
predicted and ground-truth instances.
To further evaluate the proposed method under conditions of relatively high point-
cloud completeness, experiments were conducted using the public UGA-BSAIL Cot-
ton Plants with Foliage dataset. The point-cloud data are publicly available through
Figshare (https://figshare.com/projects/Cotton_plant_with_foliage/258065, accessed on
8 September 2026), while the associated code and documentation are hosted on GitHub
(https://github.com/UGA-BSAIL/Cotton_plants_with_foliage, accessed on 8 September
2026). The dataset contains relatively complete cotton plant point clouds, surface-normal
attributes, and semantic labels distinOpen asset ↗Figshare · Cotton_plant_with_foliage/258065pdf-raw-page:16 lines:1-52Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
RiceMultimodalX-ray / CTRootMorphology / geometry measurementPhysiological trait estimationGrowth / time-series analysisGrowth / development / phenologyRoot system architecture
Rhizosphere oxidation is a key adaptive mechanism in reductive soil environments, in which oxygen released from roots alters rhizosphere redox conditions and regulates biogeochemical processes. Rice plants possess an internal oxygen transport system, and radial oxygen loss (ROL) from roots is closely associated with root development. However, the spatial patterns of ROL in soil and their relationships with root traits remain poorly characterized. In this study, we developed a multimodal imaging system that integrates planar oxygen optodes with X-ray computed tomography to simultaneously visualize rhizosphere oxidation and root development in rice. Daily time-course tracking of individual crown roots revealed dynamic changes in the spatial distribution and magnitude of rhizosphere oxygen in relation to root elongation and aging. Root thickness was positively correlated with dissolved oxygen levels near root tips. Genotypic comparisons further identified a cultivar with reduced rhizosphere oxidation despite possessing thicker roots among the tested genotypes, thereby indicating the involvement of additional physiological processes. Overall, these findings demonstrate that rhizosphere oxidation is regulated by root growth stage and thickness and dynamically modulated during root development.
Why it matches plant phenotyping methods平面酸素オプトードとX線CTを統合したマルチモーダル画像システムを開発し、根の発達と根圏酸化を時系列・個体別に定量化しており、表現型取得手法が研究の中心である。
abstractwe developed a multimodal imaging system that integrates planar oxygen optodes with X-ray computed tomography to simultaneously visualize rhizosphere oxidation and root development in rice.
Reproduction assets foundThe paper's Data availability statement explicitly deposits the authors' RG2DO-Root analysis program together with sample optode and CT images (the paper's phenotyping inputs) in a public GitHub repository, matching the allowed URL.Code · publicing
8
This work was supported by project JPNP18016, commissioned by the New Energy and
9
Industrial Technology Development Organization (NEDO), JST CREST (JPMJCR17O1),
10
and JST ALCA-Next (JPMJAN23D3).
11
12
Data availability
13
The source code and sample data (optode and CT images) are available from the
14
GitHub repository (https://github.com/tsubasa-kawai28/RG2DO-Root).15
16
References
17
Aguilar EA et al. 2003. Oxygen distribution and movement, respiration and nutrient
18
loading in banana roots (Musa spp. L.) subjected to aerated and oxygen-depleted
19
environments. Plant Soil. 253:91–102. https://doi.org/10.1023/A:1024598319404.20
Armstrong W, Wright EJ. 1975. Radial oxygen loss fromOpen asset ↗https://github.com/tsubasa-kawai28/RG2DO-Root · RG2DO-Rootpdf-raw-page:19 lines:1-82Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Published11 Sept 2026Journal of the Nigerian Society of Physical Sciences
Field / plotLeafClassificationStress / disease detectionDisease symptoms / severity
Plant diseases threaten agricultural productivity, and automated image analysis can support early identification of visible disease symptoms. This study introduces HybOptic-CNN, a convolutional neural network (CNN) whose learning rate and batch size are selected using a hybrid Whale Optimization Algorithm--Grey Wolf Optimizer (WOA-GWO). Nine disease classes were selected from the 22-class CCMT field-image dataset, and 152 local farm leaf images were collected in Enugu State, Nigeria. Of the local images, 122 (80.3%) were added to the model-development data for training and validation, whereas 30 (19.7%) formed an independent Nigerian hold-out set excluded from augmentation, class balancing, early stopping, validation, and hyperparameter selection. Across 10 model-development runs, the optimized model achieved 96.8 ± 0.4% mean validation accuracy, 95.2 ± 0.5% macro-precision, 94.9 ± 0.6% macro-recall, and 95.0 ± 0.5% macro-F1, compared with 90.3 ± 0.9% validation accuracy and 86.3 ± 1.2% macro-F1 for the baseline. The optimized model improved mean validation accuracy by 6.5 percentage points and converged 14.6 epochs earlier. On the independent 30-image Nigerian hold-out, HybOptic-CNN achieved 93.3% accuracy and 93.1% macro-F1 across four represented disease classes. A web application integrating the trained classifier was also demonstrated. These results support improved model-development performance through hybrid hyperparameter selection and motivate broader multi-location field evaluation.
Why it matches plant phenotyping methods植物の可視病徴を画像から分類するCNN手法を開発・検証しており、病害状態のフェノタイピング手法が中心である。
abstractautomated image analysis can support early identification of visible disease symptoms
Reproduction assets foundThe paper's Data availability statement points to two public sources: a Mendeley dataset (the locally collected Nigerian field images) and the Kaggle CCMT plant disease dataset used as the principal image source. Only the Kaggle URL matches an allowed URL; the Mendeley URL is not in the allowed list, so only the CCMT/KDataset · publicnt and independent field-test data and should pub-
lish the class-wise split manifest, random seeds, WOA-GWO
numerical settings, and evaluation code so that the reported pro-
cedure can be reproduced and extended.
Data availability
The data used in this study are available at https://
data.mendeley.com/datasets/bwh3zbpkpv/1 and https://www.kaggle.com/datasets/rahimanshu/ccmt-plant-disease-dataset.Declaration of competing interest
The authors declare that they have no known competing fi-
nancial interests or personal relationships that could have ap-
peared to influence the work reported in this manuscript.
Funding
The authors received no specific funding from any public,
commercial, or not-fOpen asset ↗Kaggle · rahimanshu/ccmt-plant-disease-datasetpdf-raw-page:12 lines:1-78Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Published11 Sept 2026Journal of visualized experiments : JoVE
Volatile organic compounds (VOCs) released by plant leaves play key roles in stress signaling, plant-atmosphere interactions, and plant defense. Among these, wound-induced VOCs (wVOCs) are emitted within seconds of mechanical damage, herbivory, or environmental disturbance. Their emission dynamics depend strongly on the timing, severity, and method of tissue disruption. Yet, accurate quantification remains challenging due to mechanical artifacts, variable exposure conditions, and delays between injury and measurement. This study presents a standardized within-chamber leaf excision protocol for real-time monitoring of wVOCs and gas exchange. A surgical-grade cutter was integrated into a portable gas-exchange chamber to enable clean, controlled cuts within a sealed chamber under stable light, humidity, CO2, and temperature conditions. A proton-transfer-reaction time-of-flight mass spectrometer (PTR-TOF-MS) continuously measured volatile emissions at the chamber outlet, minimizing delay and signal distortion. This setup resolves emission onset, peak timing, maximum rise rate, and total release with high temporal fidelity. Application of the method to Quercus rubra, Acer platanoides, and Gossypium hirsutum demonstrated its ability to resolve distinct wound-induced emission patterns across contrasting leaf types. By eliminating delays associated with conventional sampling, this method resolves the full kinetic trajectory of wound-induced emissions and overcomes major limitations of previous approaches. It provides a robust framework for studying rapid stress responses in plant physiology, ecological biochemistry, and plant-atmosphere interactions.
Why it matches plant phenotyping methods植物葉の創傷誘導揮発性物質とガス交換をリアルタイム定量する測定系を開発しており、植物のストレス生理状態の取得が研究の中心である。
abstractThis study presents a standardized within-chamber leaf excision protocol for real-time monitoring of wVOCs and gas exchange.
Accurate and dynamic monitoring of wheat phenotypes is essential for breeding decision-making and crop management. However, RGB image-based phenotyping still suffers from expensive pixel-level annotation, unstable organ-level segmentation across growth stages, and limited multi-trait extraction under complex field conditions. To address these issues, a high-throughput phenotyping framework (WheatScoper) was proposed, enabling organ-level segmentation and plot-level multi-trait extraction. To reduce annotation cost, a structure-aware geometry-assisted annotation (SAGA) algorithm was developed, yielding an approximately 7.6-fold improvement in annotation efficiency over fully manual annotation. To enable efficient organ-level segmentation, a lightweight semantic segmentation network (WheatScopeNet) was developed by integrating parallel hybrid spatial modeling with cross-scale feature fusion. On the held-out test set from the same site and growing season, WheatScopeNet achieved an mIoU of 0.869 and an mDice of 0.930. Leveraging the segmentation results, an automated system was established to extract 41 multi-view image-derived traits (I-traits) across four core phenotypic dimensions. The extracted I-traits supported the estimation of eight manually measured agronomic traits, with R 2 values ranging from 0.477 to 0.697. Notably, the correlations between stay-green-related-traits and yield varied distinctly with viewing-position. Only upper side-view indicators remained significantly correlated with yield, with Side-up final GPAR showing the strongest association, whereas top-view GPAR-derived indicators showed weak associations. Finally, a web-based platform integrating cascaded inference, segmentation visualization, and automatic I-trait extraction was developed. The platform provides an end-to-end solution for field wheat phenotyping and supports breeding decision-making and crop management.
Why it matches plant phenotyping methodsRGB画像から小器官を分割し、多数の植物形質を自動抽出・推定する手法とプラットフォームが研究の中心であるため、植物フェノタイピング手法として明確に採用。
abstracta high-throughput phenotyping framework (WheatScoper) was proposed, enabling organ-level segmentation and plot-level multi-trait extraction.
Plant phenotyping relevance match · UnverifiedbioRxiv · OpenAlex · Europe PMC · Crossref · checked 15 Sept 2026
Reliable plant segmentation in high-throughput phenotyping must transfer across species and imaging conditions without repeated model tuning or extensive reannotation. We compare three segmentation strategies using images from Oak Ridge National Laboratory's Advanced Plant Phenotyping Laboratory: (i) fixed color-based thresholding, (ii) supervised U-Nets trained from scratch, and (iii) pretrained vision transformers fine-tuned for binary segmentation. Models were evaluated on a held-out test set and a generalization set that comprised unseen species. On the held-out test set, thresholding, the best U-Net, and the best vision transformer achieved mean Dice scores of 58.3, 96.6, and 97.3, respectively. On the generalization set, the corresponding Dice scores were 56.5, 86.2, and 95.7. Thresholding remained effective on some datasets but failed when plant appearance changed. Supervised U-Net training resolved within-distribution errors but failed to generalize to novel species and backgrounds. Pretrained vision transformers consistently produced high-accuracy segmentations across the evaluated species, views, soil backgrounds, and tray types. These results benchmark the practical progression from fixed rules to task-specific supervision and pretrained visual representations for controlled-environment plant phenotyping.
Why it matches plant phenotyping methods植物フェノタイピングにおける画像セグメンテーション手法を比較・検証し、異なる種や撮像条件への汎化性能をベンチマークしているため、方法が研究の中心である。
abstractReliable plant segmentation in high-throughput phenotyping must transfer across species and imaging conditions without repeated model tuning or extensive reannotation.
High-throughput acquisition of crop phenotypic information is one of the key technologies for achieving intelligent facility agriculture and precision breeding. Traditional phenotypic data collection methods suffer from low efficiency and strong subjectivity, making it difficult to achieve multi-scale continuous monitoring and meet the demands of modern research and production. This paper systematically reviews the technological framework and development trajectory of optical sensing technology-driven phenotypic platforms for facility crops. First, starting from optical sensing technologies, a comparative analysis highlights the advantages and limitations of RGB, multi-/hyperspectral, thermal infrared, and LiDAR sensors in phenotypic perception. Second, the characteristics and applicable scenarios of stationary, rail-mounted, mobile robot, and unmanned aerial vehicle (UAV) platform architectures are summarized. Furthermore, the evolution of phenotypic data processing methods is examined, focusing on the shift from traditional feature engineering to deep learning-driven approaches. Finally, key challenges such as multimodal data fusion, system cost, and real-time performance are discussed, along with the future direction of phenotypic platforms toward intelligent closed-loop decision-making systems. This article systematically reviews the facility agriculture phenotyping platforms driven by optical sensing technology, and also incorporates representative research progress in field phenotyping studies. These advances provide transferable sensing technologies, methodological frameworks, and platform design concepts that can facilitate the development of phenotyping platforms for controlled-environment agriculture.
Why it matches plant phenotyping methods施設作物の光学センシング型ハイスループット表現型解析プラットフォームを体系的にレビューしており、センサー、プラットフォーム構成、データ処理を中心に扱うため、方法論レビューとして明確に適格です。
abstractThis paper systematically reviews the technological framework and development trajectory of optical sensing technology-driven phenotypic platforms for facility crops.
Advanced crop monitoring inside greenhouses is becoming one of the primary objectives of research centers. High-performance sensors, such as LiDAR or stereo cameras, have traditionally been employed for this purpose, though these often have a high cost. This work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse. Tests were carried out on a real tomato bunch, located in the Agroconnect experimental greenhouse. A ROS 2 Humble node was developed to run on the robot in order to capture images of these crops, which were then stored for offline processing. To generate a 3D mapped model for the crop in the greenhouse, the GLOMAP mapper, based on Structure-From-Motion, was integrated with the Hierarchical Localization toolbox. This initial mapping is a foundation for future, more advanced algorithms to analyze growth patterns, and optimize agricultural management. The system leverages a hierarchical localization paradigm based on a coarse-to-fine strategy: it first performs global retrieval to generate location hypotheses, then combines local features within the identified candidate regions. The results show a correct identification of the tomato cluster, correctly characterising the tomato that is occluded and inaccessible by classical vision technologies. The reconstructed 3D model was further validated against manual ground-truth measurements of fruit size, centroid position, and orientation, confirming the geometric accuracy of the proposed low-cost monocular pipeline.
Why it matches plant phenotyping methods単なる収穫対象の位置検出ではなく、単眼Visual-SLAMと3D再構成を開発し、果実サイズ・重心位置・向きを実測値で検証しているため、植物器官形質の取得手法が中心である。
abstractThis work proposes a Visual-SLAM system using a monocular camera, which is significantly more cost-effective and specifically tailored for agricultural applications, such as mapping tomato crops in a greenhouse.
Abstract Purpose Agrivoltaic vineyards show strong spatio-temporal variability in canopy shading, but field methods to quantify panel-induced shading at canopy scale remain limited. Shading is a key factor because it affects plant physiological and morphological traits, with potential consequences for yield and production quality. This study developed a near-surface time-lapse RGB imaging approach to derive temporally explicit shading metrics in an agrivoltaic vineyard of Vitis vinifera cv. Falanghina in Southern Italy. Methods Two representative vine positions beneath the photovoltaic structure were monitored: Agrivoltaic Shade (AVS), with greater exposure to panel-induced shading, and Agrivoltaic Light (AVL), with lower exposure. Image-based canopy shading percentage was calculated through a dedicated processing workflow and integrated with radiometric and physiological measurements, including continuous photosynthetically active radiation (PAR), canopy-level spectral photon flux measurements, photosynthetic photon flux density (PPFD), band-specific photon flux densities, red:far-red ratio (R:FR), stomatal conductance (gₛ), and leaf temperature. PAR measurements beneath the panels were compared with a full-sun control area. Results AVS showed significantly higher shading than AVL (76.14% vs 39.45%, p Conclusion The proposed workflow offers a low-cost, non-destructive tool to quantify shading dynamics and support site-specific assessment of crop microenvironments in agrivoltaic systems. The approach provides crop-relevant information for precision monitoring and management of spatially heterogeneous light conditions across different crop species. Impact The data provided in this manuscript enable the quantification of in-season photovoltaic-induced canopy shading dynamics in an agrivoltaic vineyard using proximal RGB time-lapse imaging and crop-level radiometric measurements. These metrics reflect the spatial and temporal variability of light availability within the vineyard and support site-specific assessment of crop microenvironments and precision management of agrivoltaic systems.
Why it matches plant phenotyping methodsブドウ樹冠の遮光状態をRGBタイムラプス画像から定量化する手法を開発し、専用処理ワークフローと実測値で評価しており、植物フェノタイピング手法が中心である。
abstractThis study developed a near-surface time-lapse RGB imaging approach to derive temporally explicit shading metrics in an agrivoltaic vineyard of Vitis vinifera cv. Falanghina in Southern Italy.
Polyploidy can be a critical factor for explaining plant trait variation, niche diversification, or speciation. However, inferring ploidy from silica-dried or historical samples using chromosome counts or flow cytometry is not possible, and scaling up ploidy estimation to population-level fresh contemporary samples can be challenging as well. Thus, we present a new method for estimating ploidy levels directly from sequencing data using machine learning; the Polyploid Population Genomics Tool Kit (PPGTK). The machine-learning approach is advantageous as it relaxes the assumptions of previous probabilistic methods and provides per-sample probabilities, allowing investigators to evaluate uncertainty in their system of interest.. We demonstrate performance and accuracy of the method on simulated and empirical data. Simulations showed above 99% accuracy, even for low coverage data, as long reads were mappable to the reference genome. For empirical analyses, we used target enrichment data from blueberry wild relatives (Vaccinium sect. Cyanococcus) and whole-genome data from sweetpotato wild relatives (Ipomoea ser. Batatas). Ploidy was recovered with 99% accuracy across 70 Vaccinium individuals and 97% across 82 Ipomoea individuals. Analysis of many individuals is fast and requires only a multisample VCF, which is presumably generated for the research anyway, and some samples of known ploidy for training the classifier. The approach implemented in PPGTK is promising for collections-based research as well, enabling ploidy classification of historical specimens based on present-day observations. The method is implemented in a new Python package as a single command that can run on a conventional laptop.
Why it matches plant phenotyping methods植物の倍数性という状態をシーケンスデータから推定する機械学習手法を開発し、シミュレーションおよび実データで精度検証している。Pythonパッケージとして実装され、手法自体が中心である。
abstractwe present a new method for estimating ploidy levels directly from sequencing data using machine learning; the Polyploid Population Genomics Tool Kit (PPGTK).
Reproduction assets foundThe paper's ploidy-classification method is implemented in the authors' public Python package PPGTK, with a specific release (v0.1.0-alpha) used for the manuscript's analyses. The empirical VCF/metadata datasets are promised on Dryad only 'upon acceptance' and thus are not yet actionable.Code · public11
VCFs and metadata needed to reproduce Vaccinium sect. Cyanococcus and Ipomoea ser.
372
Batatas analyses with PPGTK will be made available via Dryad upon acceptance. PPGTK is
373
available on GitHub, and release v0.1.0-alpha was the version used for analyses in this
374
manuscript (https://github.com/tileylab/PPGTK/releases/tag/v0.1.0-alpha). PPGTK currently has
375
other functions for calculating population genetic summary statistics, but the classify-ploidy
376
function implements the machine-learning method described in the manuscript.
377
378
.
CC-BY 4.0 International license
is made available under a
preprint (which was not certified by peer review) is the auOpen asset ↗tileylab/PPGTK · v0.1.0-alphapdf-raw-page:11 lines:1-24Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
ArabidopsisThermalLeafTissueGrowth / time-series analysisStress response / tolerancePlant / canopy temperature
Repairing damaged tissues is essential for the survival of all organisms. In plants, tissue injury rapidly triggers defense and repair programs. However, the molecular mechanisms linking early injury cues to the later stage of wound repair remain unclear. Here, we show that wounding of Arabidopsis leaves induces localized low temperature at the injury site, likely caused by evaporative cooling, which is accompanied by an activation of cold-responsive genes. Using thermal imaging combined with computer vision and deep learning, we developed a workflow to monitor the dynamics of wound healing in a quantitative, non-invasive, and real-time manner. Mechanistically, we show that C-repeat Binding Factor (CBF) transcription factors are required for the activation of the injury-associated cold response and downstream salicylic acid (SA) signaling. Our findings suggest that the CBF-SA pathway acts coordinately to promote lignin and callose deposition, thereby facilitating wound repair. Together, these findings reveal a link between a wound-induced biophysical cue and the tissue repair program.
Why it matches plant phenotyping methods熱画像とコンピュータビジョン・深層学習を組み合わせ、植物の創傷治癒を定量的・非侵襲的・リアルタイムに測定するワークフローを開発しており、表現型取得法が研究の中心である。
abstractUsing thermal imaging combined with computer vision and deep learning, we developed a workflow to monitor the dynamics of wound healing in a quantitative, non-invasive, and real-time manner.
Abstract Accurate estimation of maize leaf nitrogen content is important for improving nitrogen-use efficiency and supporting precision crop management. However, leaf-level hyperspectral modeling is challenged by high spectral redundancy and heterogeneous spectral responses among local leaf regions. This study proposes a Hyperspectral–Region Aggregation Network (HSRAN) for maize leaf nitrogen content estimation from region-level hyperspectral spectra. HSRAN consists of a Spectral Adaptive Recalibration Encoder (SARE) and a Context-Aware Gated Aggregation Module (CAGM). SARE performs band-wise residual recalibration and extracts regional spectral representations, whereas CAGM models contextual dependencies among regional features and performs gated attention-based aggregation for leaf-level prediction. Field experiments were conducted in 2024 and 2025 at the jointing, silking, and maturity stages. HSRAN was evaluated against PLSR, RF, XGBoost, SVR, 1D-CNN, MLP, and Transformer1D models. Across the stage-specific and pooled datasets, HSRAN achieved the highest R² and the lowest RMSE while maintaining competitive MAE values. On the pooled full-growth-period dataset, HSRAN achieved an R² of 0.84, an RMSE of 3.63 g kg⁻¹, and an MAE of 2.59 g kg⁻¹. At the jointing, silking, and maturity stages, the corresponding R² values were 0.56, 0.76, and 0.72, respectively. Ablation experiments indicated that integrating SARE and CAGM improved R² from 0.80 to 0.84. To interpret regional contributions, the learned attention weights were mapped back to the original leaf coordinates recorded during regional sampling. Regions near leaf veins, tips, and margins often received relatively higher attention weights, suggesting that their local spectra provided informative cues for model prediction. These findings indicate that spectral–regional joint modeling can improve leaf-level hyperspectral estimation of maize nitrogen content. HSRAN provides a practical framework for non-destructive nitrogen assessment in maize.
Why it matches plant phenotyping methodsトウモロコシ葉の窒素含量という植物形質を非破壊推定するためのハイパースペクトル深層学習手法を開発し、複数手法との比較・アブレーション検証を行っており、フェノタイピング手法が中心である。
abstractThis study proposes a Hyperspectral–Region Aggregation Network (HSRAN) for maize leaf nitrogen content estimation from region-level hyperspectral spectra.
Quantitative imaging of plant tissues by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) is hindered by the lack of matrix-matched calibration standards. Established approaches, such as gelatine or homogenised tissue blocks, do not replicate plant matrices accurately. Here, we introduce a nano-dispenser-based calibration strategy that deposits nanolitre volumes of elemental standards directly onto paraffin-embedded grain sections, exploiting the low endogenous metal content of the endosperm to generate in situ calibration curves. Calibration performance for Mg, Mn, Cu, Zn, and Mo was assessed using LA-ICP-MS imaging and Iolite 4 data processing. The method demonstrated excellent linearity (R 2 > 0.98), reproducibility across multiple grains, and sub-ppm limits of detection. Comparative analysis with in-house homogenised blocks and NIST wheat reference material confirmed superior accuracy and reproducibility of the nano-dispenser approach. As a proof-of-concept, we have applied the method for the quantitative imaging of metals in a whole barley grain section, and the results show excellent agreement with published data obtained by conventional liquid-mode ICP MS. The technique reported here provides a robust, scalable, solution for quantitative metallomics studies of plant tissues, enabling improved assessment of nutrient distribution and supporting the development of standardised protocols for LA-ICP-MS imaging.
Why it matches plant phenotyping methods植物組織内の元素分布を定量画像化するLA-ICP-MSの校正法を開発・検証しており、植物栄養状態の測定手法が中心である。
abstractHere, we introduce a nano-dispenser-based calibration strategy that deposits nanolitre volumes of elemental standards directly onto paraffin-embedded grain sections
Abstract Tomato leaf diseases (TLDs) such as Early Blight (EB), Late Blight (LB), and Leaf Mold (LM) have a negative impact on crop yield and quality, result-ing in economic losses in agriculture. Traditional diagnosis methods depend on the visual recognition of a disease, which are time-consuming, subjective and may be difficult to reach in rural settings. Keeping these drawbacks in mind, the present work introduces a Transfer Learning model for tomato leaf disease classification based on EfficientNetB3 network. A pretrained Ef-ficientNetB3 network, trained on ImageNet, is used to obtain discriminative features like lesion boundaries, discoloration, fungal textures, and infection spots. Images are cropped to 224 × 224 pixels and split into training, validation and test set. The proposed architecture employs Global Average Pooling, a dense layer with ReLU activation, drop out regularization and Softmax classifier for classification of tomato leaf images into four classes: Early Blight, Late Blight, Leaf Mold and Healthy. Experimental results show the high classification accuracy and low training, validation and test-ing losses. Inter-class misclassifications of the confusion matrix show very few, which supports good generalization. Moreover, Grad-CAM visualiza-tions can generate interpretable heat maps that point to the regions of the image affected by the disease, and multi-class ROC analysis gives high AUC values, which means that it has excellent class separability. The proposed framework provides a precise, reliable, and interpretable approach for auto-mated tomato leaf disease diagnosis, contributing to precision agriculture by assisting in early detection and prompt management of tomato diseases.
Why it matches plant phenotyping methodsトマト葉画像から病害状態を推定する深層学習手法が研究の中心であり、Grad-CAMによる病変領域の解釈と性能評価も行っているため、植物表現型計測手法として採択。
abstractthe present work introduces a Transfer Learning model for tomato leaf disease classification based on EfficientNetB3 network
Reproduction assets foundThe paper's tomato leaf disease classification uses a publicly available Kaggle dataset (PlantVillage-derived tomato leaf images, 4000 images across 4 classes), explicitly declared in the Data Availability statement with a public URL. No author code, trained models, or other paper-specific assets are disclosed.Dataset · publicitted in accordance with the Journal policies.
Permission to use third-party material
Images or figures are never published previously and did not take from any
internet resources.
Data Availability
The dataset used in this study is publicly available from the PlantVillage
tomato leaf disease dataset on Kaggle’s following link:
https://www.kaggle.com/datasets/kaustubhb999/tomatoleaf
Acknowledgements
The authors would like to thank SR University, Warangal, Telangana,
INDIA and Sharda University, Greater Noida, Uttar Pradesh, INDIA for
providing research facilities and computational resources to carry out this
work.Open asset ↗Kaggle · kaustubhb999/tomatoleafpdf-raw-page:20 lines:1-18Plant phenotyping relevance match · UnverifiedOpenAlex · arXiv · checked 15 Sept 2026
Autonomous, cross-facility science requires capabilities that no individual project should have to build for itself: managed execution for long-lived services, versioned distribution of models to remote compute systems, governed access to large language models, a shared substrate for experimental data, and end-to-end provenance. The U.S. Department of Energy Genesis Mission platform, delivered through the American Science Cloud, provides these as reusable services. This paper reports how the Genesis platform enables cross-facility experiments and accelerates scientific discovery. We explore the plant phenotyping workflow of the Orchestrated Platform for Autonomous Laboratories as the exemplar: it couples Oak Ridge National Laboratory's Advanced Plant Phenotyping Laboratory with the Frontier supercomputer. In a 40-day nickel-treatment campaign, the resulting workflow replaced roughly twelve hours of manual analysis with interactive queries returning in seconds to minutes.
Why it matches plant phenotyping methods植物フェノタイピングのワークフローを実証例として、実験施設とスーパーコンピュータを連携する再利用可能なプラットフォーム基盤を報告しており、フェノタイピング基盤が中心的である。
abstractWe explore the plant phenotyping workflow of the Orchestrated Platform for Autonomous Laboratories as the exemplar: it couples Oak Ridge National Laboratory's Advanced Plant Phenotyping Laboratory with the Frontier supercomputer.
Abstract Background and Aims Drought reduces wheat yields, yet field-scale quantification of root water uptake (RWU) remains challenging because below-ground processes are difficult to monitor. This study developed a non-invasive hydrogeophysical framework integrating Electrical Resistivity Tomography (ERT), TDR-based soil monitoring, and depth-aware Random Forest calibration to quantify depth-resolved RWU and evaluate genotype-specific water-use strategies under terminal drought. Methods Time-lapse ERT (44 surveys, ≥ 3 week⁻ 1 ) was combined with TDR sensor measurements of soil water content (n = 278 paired ρ–θ observations) to convert resistivity measurements into depth-resolved RWU estimates across 0.1–1.0 m depth. Five petrophysical models were evaluated using date-grouped fivefold cross-validation, with the depth-aware Random Forest performing best. Three wheat genotypes with contrasting root architectures were monitored under terminal drought (142 mm available water). ERT-derived RWU were analysed alongside stomatal conductance, chlorophyll fluorescence, and grain yield. Results ERT resolved RWU strategies among genotypes. WM-203 exhibited aggressive, coordinated multi-layer water extraction across the soil profile (r = 0.80–0.98), whereas WM-140 showed a delayed uptake strategy characterized by early deep-layer dominance followed by mid- and deep-profile engagement, and IPLR-760 displayed inconsistent uptake with mid-profile hydraulic decoupling. Genotypic RWU rankings were consistent with stomatal conductance and grain yield, spanning from 7.0 t ha⁻ 1 in WM-203 to 1.5 t ha⁻ 1 in IPLR-760 despite comparable total water extraction. Conclusion ERT-based quantification of RWU provides a robust, non-invasive approach for resolving genotype-specific water-use strategies under field conditions. The framework enables characterization of water-use coordination patterns and offers a tool for phenotyping drought-resilient wheat genotypes.
Why it matches plant phenotyping methodsERT・TDR・Random Forestを統合し、圃場コムギの根系水吸収を定量化する方法を開発・検証し、乾燥耐性遺伝子型の表現型評価に用いているため、フェノタイピング手法が中心である。
abstractThis study developed a non-invasive hydrogeophysical framework integrating Electrical Resistivity Tomography (ERT), TDR-based soil monitoring, and depth-aware Random Forest calibration to quantify depth-resolved RWU and evaluate genotype-specific water-use strategies under terminal drought.
Reproduction assets foundThe paper's Data availability statement explicitly states that the code and supporting data for this ERT-based root water uptake study are publicly available on the authors' GitHub repository, which is listed in allowed_urls. This qualifies as a paper-specific public code/data asset for the phenotyping analysis.Code · publicsity of Jerusalem. This research was supported by the Chief
Scientist of the Israeli Ministry of Agriculture and Food Secu-
rity (grant no. 12–01-0056) and the Israeli Council for Higher
Education (Project: Future Crops for Carbon Farming).
Data availability The code and supporting data for this study
are publicly available at:
https://github.com/emmaiyke/ERT_RWU_Wheat_Project
Additional datasets are available from the corresponding
author upon reasonable request.
Declarations
Competing interests The authors declare that they have no
known competing financial interests or personal relationships
that could have appeared to influence the work reported in this
paper.
Open Access This article isOpen asset ↗ERT_RWU_Wheat_Project · emmaiyke/ERT_RWU_Wheat_Projectpdf-raw-page:22 lines:1-95Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Cadmium contamination severely affects rice growth, yield, and quality, making early stress monitoring essential for agricultural management and food safety. However, traditional detection methods are cumbersome and time-consuming, limiting their applicability to early stress diagnosis. This study developed a rapid and accurate approach for discriminating cadmium stress levels in rice. Arginine-modified flower-like silver nanoparticles (Ag NPs-Arg) were synthesized to enhance Raman signals associated with three stress-response indicators: salicylic acid (SA), malondialdehyde (MDA), and peroxidase (POD) activity. Quantitative prediction models for these physiological indicators and a stress-level discrimination model were established. Among the evaluated models, the CNN-Transformer model achieved the best predictive performance, with Rp 2 values of 0.889, 0.832, and 0.802 for SA, MDA, and POD activity, respectively. An objective weighting method was used to integrate the three biochemical reference indicators, providing a multi-indicator physiological basis for comprehensive stress assessment. The resulting stress-level assessment model achieved an accuracy of 95.83%, demonstrating its ability to capture cadmium-induced physiological changes and assess stress levels in rice.
Why it matches plant phenotyping methods携帯型Raman SERSと深層学習を開発し、イネの生理指標とカドミウムストレスレベルを推定・判別することが研究の中心であるため、植物フェノタイピング手法に該当する。
abstractThis study developed a rapid and accurate approach for discriminating cadmium stress levels in rice.
Plant diseases, being a subject of interdisciplinary research, significantly reduce crop yield, quality, and economic returns, while the misidentification of pathogens often leads to ineffective treatments and may harm beneficial organisms and ecosystems. This work develops an approach for robust visual classification of plant diseases under limited and heterogeneous data based on multi-scale fractal texture descriptors integrated into a convolutional neural network. The proposed method employs wavelet transform modulus maxima to extract two complementary fractal characteristics, local fractal dimension and singularity spectrum width, from leaf images at several spatial scales. These descriptors form multi-channel fractal maps fed into a fractal attention module (FAM) inserted after the third stage of a ResNet-50 architecture. The FAM learns to emphasize spatial regions where fractal properties are most discriminative, while a parallel branch encodes global fractal statistics into an auxiliary vector combined with backbone features at the final classification layer. Experiments are conducted on a large heterogeneous collection of 11 public plant disease datasets under 5-shot, 50-shot, and full-scale training regimes. The fractal-augmented model raises classification accuracy from 57.06% to 67.73% on 5 shots and from 80.81% to 86.11% on 50 shots, red outperforming the plain ResNet-50 in these settings, converges within 1–2 epochs versus 25–40, and shows markedly better resilience to color distortions, random occlusions, and grayscale conversion in most cases. The generated attention maps provide spatially explicit explanations of the model’s decisions, increasing transparency for practical use. The proposed approach demonstrates that fractal analysis, embedded as a modulating signal inside a deep network, can serve as an efficient and interpretable inductive bias, which is particularly valuable under data scarcity and noisy agricultural imagery.
Why it matches plant phenotyping methods植物葉画像から病害状態を推定するフラクタル特徴抽出とCNN手法の開発・評価が中心であり、植物病害フェノタイピング手法に該当する。
abstractThis work develops an approach for robust visual classification of plant diseases under limited and heterogeneous data based on multi-scale fractal texture descriptors integrated into a convolutional neural network.
Field / plotFlowerClassificationObject detectionGrowth / development / phenology
Abstract Dioecious crops face significant pollination challenges due to the asynchrony in flowering between male and female plants. This asynchrony varies spatially across orchards, requiring targeted interventions in zones where synchrony is lacking. Assisted pollination addresses this deficiency, albeit at a substantial operational cost that could be optimised through spatial phenological mapping. Manual assessment proves economically infeasible at commercial scales, while existing computer vision systems are unable to classify phenological stages and integrate geospatial information. This study presents the Mobile Phenological Mapping (MPM) Framework, which integrates GNSS-synchronised smartphone video with automated phenological detection to generate plant-level phenological distribution maps validated in commercial kiwifruit (Actinidia chinensis) orchards. This modular framework comprises (i) training and validation data acquisition, (ii) model optimisation, (iii) operational pipeline, and (iv) performance evaluation. MPM employs hierarchical deep learning across three stages: structure detection, gender classification, and phenological stage classification. Video frames are georeferenced through timestamp matching with GNSS metadata, enabling spatial phenological mapping. Operational validation across four commercial orchard zones demonstrated mean absolute percentage errors of 17.2% for structure detection and 20.1% for gender classification. The framework reduces monitoring time from 113 to 1.6 hours per hectare, decreasing labour costs from €2 060 (113 hours × 18.20 € per hour) to €29 (1.6 hours × 18.20 € per hour) per hectare based on the Portuguese hourly labour cost for minimum wage workers. When integrated with routine orchard operations, video acquisition incurs negligible additional cost. MPM provides growers with precision phenological maps for targeted pollination interventions. While validated in a kiwifruit orchard, the modular architecture can be adapted to other crops by replacing the training data.
Why it matches plant phenotyping methodsスマートフォン動画とGNSSを用いて植物体レベルの性別・生育段階を自動検出し、フェノロジー分布を作成する手法と、その性能評価・商業園での検証が研究の中心である。
abstractThis study presents the Mobile Phenological Mapping (MPM) Framework, which integrates GNSS-synchronised smartphone video with automated phenological detection to generate plant-level phenological distribution maps validated in commercial kiwifruit (Actinidia chinensis) orchards.
This study systematically evaluated the contribution of UAV LiDAR structural features such as crop height (CH) and multi-layer gap fraction (GF) and the amplitude of the returning signal represented by normalized intensity (INT), together with multispectral (MS) and thermal infrared (TIR) observations for aboveground biomass (AGB) estimation in winter wheat using a common artificial neural network (ANN) framework. Among the evaluated single sensor approaches, LiDAR features consistently provided the strongest performance, demonstrating the complementary value of crop height, vertically distributed canopy density, and normalized LiDAR intensity for characterizing canopy structure and within-canopy variability. Multi-layer GF improved AGB estimation relative to conventional ground-based GF approaches, highlighting the importance of incorporating the vertical distribution of canopy density. Multi-sensor fusion produced only modest additional improvements, indicating limited benefits relative to the increased acquisition and processing requirements. Temporal analysis showed that structural LiDAR features were most informative during early crop development, whereas normalized intensity, spectral reflectance, and thermal observations became increasingly valuable during canopy maturation and senescence. Comparisons with destructively measured plant area index (PAI), leaf area index (LAI), green leaf area index (GLAI), and green fraction of LAI further demonstrated that normalized LiDAR intensity (903 nm) was more closely associated with green canopy components than purely structural LiDAR metrics. Overall, the results demonstrate that fully exploiting both the structural and spectral information contained within LiDAR observations can substantially improve UAV-based biomass estimation, while multispectral and thermal observations provide complementary information whose contribution varies with crop development and monitoring objectives.
Why it matches plant phenotyping methodsUAV LiDAR・マルチスペクトル・熱画像とANNを用いた小麦バイオマス推定手法を系統的に比較・評価しており、植物形質推定の取得・解析方法が研究の中心である。
abstractThis study systematically evaluated the contribution of UAV LiDAR structural features such as crop height (CH) and multi-layer gap fraction (GF) and the amplitude of the returning signal represented by normalized intensity (INT), together with multispectral (MS) and thermal infrared (TIR) observations for aboveground biomass (AGB) estimation in winter wheat using a common artificial neural network (ANN) framework.
Accurate litchi counting from whole-tree images is essential for yield estimation, orchard management, and plant phenotyping, but remains challenging in real orchards because fruits occur in dense, heavily occluded clusters and vary markedly in scale, illumination, and appearance across ripening stages, particularly when green fruits resemble surrounding foliage. Existing methods have shown promise, but their robustness in complex orchard environments remains limited. To address these challenges, we propose FG-LCNet, a two-stage foreground-guided litchi counting framework. In the first stage, an enhanced fruit-cluster detector improves the localization of small and ambiguous clusters under complex canopy backgrounds. In the second stage, the detected foreground regions are fed into a density-regression network with hybrid attention, while a consistency-based training strategy is introduced to improve robustness to appearance and illumination variations. To support this study, a large-scale litchi counting dataset was established, consisting of 1,126 whole-tree images collected from five orchards and spanning three ripening stages, with approximately 120,000 fruit-level dot annotations and more than 20,000 cluster-level bounding boxes. FG-LCNet achieved the best overall counting performance, with an MAE of 7.44 and an RMSE of 11.01. It showed clear advantages in high-density fruit-cluster scenarios and cross-orchard validation, while maintaining competitive results across orchard-region and maturity-stage subsets. The framework further retained inference efficiency suitable for practical deployment. These results indicate that FG-LCNet provides an effective solution for robust litchi counting and offers potential for other clustered fruit-counting tasks.
Why it matches plant phenotyping methods果実数という植物器官形質を whole-tree 画像から推定する二段階画像解析手法を開発し、データセット構築と交差果樹園検証まで行っており、表現型取得・抽出法が中心である。
abstractwe propose FG-LCNet, a two-stage foreground-guided litchi counting framework.
Reproduction assets foundThe paper's implementation code is explicitly stated as publicly available at the authors' GitHub repository (FG-LCNet). The litchi counting dataset (1,126 whole-tree images with ~120,000 dot annotations and 20,000+ bounding boxes) is not yet fully public: a ~100-image annotated subset is promised upon acceptance, and,Code · publicdustry Technology Research System (CARS-32-21), Hainan Modern Agricul-
655
tural Industry Technology System (HNARS-08-G02).
656
Conflicts of Interest
657
The authors declare that there is no conflict of interest regarding the publication of this article.
658
Data Availability
659
The implementation code is publicly available at https://github.com/johnhamtom/FG-LCNet .
660
Upon acceptance, a representative subset of approximately 100 annotated litchi images will be
661
released to support reproducibility and preliminary benchmarking. The full dataset is being further
662
organized for future release. Before full release, the complete dataset can be obtained from the
663
corresponding authorOpen asset ↗johnhamtom/FG-LCNetpdf-raw-page:28 lines:1-81Code / dataset availability confirmedEurope PMC · checked 15 Sept 2026
Abstract Maize plant plays crucial role not only in the field of agriculture but also in global economy, since it is the third most cultivated crop across the globe. However, these plants are usually affected by various types of diseases such as blight, common rust, gray leaf spot, etc., protecting the plants from these disease is very important. This research proposes a new deep learning model for disease detection to perform well than other models. The hybrid model uses MobileNetV3 as the backbone architecture integrated with attention, fusion and head. The framework includes data preprocessing, feature extraction, classification and interpretation. We will compare the performance of this model with other models such as VGG16, ResNet50, DenseNet121, ALEXNET, etc. criteria for the final evaluation includes Accuracy, Precision, Recall, F1score, Specificity, Logloss, AUC-ROC curve. Through this proposed model we have achieved an accuracy of 98% which is high than the other models compared. The lightweight nature of MobileNetV3 enables us to implement the model in the mobile and IoT devices also. The present study contributes to the development of deep learning model in the field of agriculture, offering a efficient solution for early maize leaf disease detection.
Why it matches plant phenotyping methodsトウモロコシ葉の病徴を画像から検出・分類する深層学習手法の開発と比較が中心であり、植物病害状態の画像ベース表現型計測に該当する。
abstractThis research proposes a new deep learning model for disease detection to perform well than other models.
Reproduction assets foundThe paper's maize leaf disease detection model (MAFH) was trained and evaluated entirely on a public Kaggle image dataset, which the authors explicitly declare in the Data Availability statement. No author code, trained model checkpoints, or other paper-specific assets are stated as publicly available.Dataset · publicig and real-
time datasets and in all the environmental situations.
Funding: This research received no external funding.
Disclosure statement: The authors declare no conflict of interest.
Data Availability
The datasets generated and/or analyzed during the current study are available in the CORN OR
MAIZE LEAF DATASET repository,
https://www.kaggle.com/datasets/smaranjitghose/corn-or-maize-leaf-disease-datasetOpen asset ↗Kaggle · corn-or-maize-leaf-disease-datasetpdf-raw-page:27 lines:1-34Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Published7 Sept 2026Microscopy research and technique
Mangrove ecosystems are frequently exposed to high concentrations of iron (Fe) in sediments, resulting in Fe accumulation in plant tissues. Although Fe is an essential micronutrient involved in several metabolic processes, its excess requires efficient mechanisms of compartmentalization and storage to maintain cellular homeostasis. Histochemical detection using the Perls reaction has usually been applied to identify ferric iron (Fe 3+ ) in biological tissues; however, the combination of this technique with ultrastructural and elemental analyses remains relatively unexplored in plant cells. In this study, we investigated Fe localization in leaf tissues of Rhizophora mangle L. (Rhizophoraceae), a dominant mangrove species, by combining complementary approaches, including Perls cytochemical reaction, transmission electron microscopy (TEM), scanning transmission electron microscopy coupled with high-angle annular dark-field imaging (STEM-HAADF), and energy-dispersive X-ray spectroscopy (EDS). Perls-positive electron-dense deposits were visualized at the ultrastructural level, and their elemental composition was further characterized by EDS analyses. Fe-containing deposits were detected in the epidermis, mesophyll parenchyma, mucilage cells, and vascular tissues, as well as in multiple cellular compartments, including plastids, mitochondria, vacuoles, cell walls, intercellular spaces, and plasmodesmata, whereas sclerenchyma cells showed no detectable Fe-containing deposits. The combination of Perls reaction with TEM, STEM-HAADF, and EDS provides a complementary approach for high-resolution visualization and elemental characterization of Fe-containing deposits at the subcellular level. This integrated methodology may facilitate the investigation of Fe distribution and compartmentalization in plant tissues under contrasting conditions of Fe availability.
Why it matches plant phenotyping methods植物葉の鉄分布・細胞内区画化という生理状態を対象に、複数の顕微鏡・元素分析法を統合した可視化および特性評価手法が研究の中心であるため。
abstractThe combination of Perls reaction with TEM, STEM-HAADF, and EDS provides a complementary approach for high-resolution visualization and elemental characterization of Fe-containing deposits at the subcellular level.
Water scarcity and increasingly irregular rainfall threaten avocado production in Mediterranean regions, yet the long term physiological responses of mature trees to sustained deficit irrigation remain poorly understood. We conducted a two-year field study integrating continuous monitoring of the soil plant atmosphere continuum, drone-based multispectral imaging, canopy structural analysis, and fruit phenotyping in a mature avocado orchard subjected to three irrigation regimes. The two study years differed markedly in rainfall, providing a unique opportunity to evaluate how environmental conditions modulate tree responses to water limitation. Trees under severe deficit irrigation showed depletion of water in deeper soil layers and a flattened physiological profile, with near-zero diel variation in leaf thickness and trunk water potential, indicating minimal transpiration and decoupling of tree water status from environmental demand. Drone telemetry via NDVI detected stress during fruit growth and maturation, but not during flowering or the new summer leaf flush, revealing greater drought sensitivity at later maturation stages. Although canopy area did not differ among irrigation treatments, canopy surface roughness increased significantly under deficit irrigation, thereby identifying a novel structural indicator of drought stress. Despite large physiological differences among treatments, fruit number remained stable, while fruit weight decreased significantly under severe deficit irrigation, particularly in the wetter year, suggesting that annual rainfall modulates the trade-off between fruit retention and fruit growth. This study provides the first continuous, multi-scale characterization of avocado performance under sustained deficit irrigation in Mediterranean conditions. By integrating plant-based sensors, remote sensing, and artificial intelligence, we reveal previously undescribed stress dynamics and identify new indicators for precision irrigation management in fruit crops.
Why it matches plant phenotyping methods継続的な植物センサー、ドローン画像、樹冠構造解析、果実表現型計測を統合し、NDVIや樹冠表面粗さなどのストレス指標を抽出する方法が研究の主要部分であるため。
abstractWe conducted a two-year field study integrating continuous monitoring of the soil plant atmosphere continuum, drone-based multispectral imaging, canopy structural analysis, and fruit phenotyping
Rice leaf diseases significantly reduce agricultural yield and pose a major challenge for sustainable food production, particularly owing to the limitations associated with manual and visual inspection methods that are subjective and often ineffective in early-stage detection. This investigation proposes a new Hybrid ResConvolutional Neural Network (HyResCN-Net) for effective classification and severity identification of rice plant leaf diseases. The proposed framework integrates an Internet of Things (IoT) -based data acquisition and routing simulation using CrowWhale Energy Trust Routing (CrowWhale-ETR) for efficient data handling. Initially, preprocessing is done by an averaging filter to reduce noise. Then, plant leaves are segmented using the Eff-UNet++ method. Augmentation techniques like rotation, scaling, and color change are applied to expand the dataset. Features, like entropy with Gradient Directional Pattern (GDP), Complete Local Binary Pattern (CLBP), and histogram features, are extracted to enhance feature representation. These features are then used within the proposed HyResCN-Net model, which integrates Parallel Convolutional Neural Network (PCNN) and ResNeXt to improve discriminative learning for disease classification and severity estimation. Experimental evaluation is conducted on the Rice Leaf Bacterial and Fungal Disease Dataset. Considering a k-value of 8, the HyResCN-Net gains an accuracy of 94.258%, a True Positive Rate (TPR) of 96.479%, a True Negative Rate (TNR) of 92.898%, a precision of 91.312% and an F1-score of 93.824% compared to existing methods. The HyResCN-Net efficiently enhances rice leaf disease identification and severity analysis, supporting its applicability in precision agriculture applications.
Why it matches plant phenotyping methodsイネ葉の病害分類と重症度という植物の状態を、画像取得・分割・特徴抽出・深層学習により推定する手法を開発・評価しており、フェノタイピング手法が中心である。
abstractThis investigation proposes a new Hybrid ResConvolutional Neural Network (HyResCN-Net) for effective classification and severity identification of rice plant leaf diseases.
This study assessed the integration of Unmanned Aerial Vehicles (UAVs) and satellite images (Sentinel-1 and Sentinel-2) in advanced machine-learning techniques to monitor the ABV of quinoa crops (Jacha Grano variety) across the Bolivian Altiplano. The proposed method follows a two-step procedure. First, UAV RGB images were used in photogrammetric and deep-learning (Convolutional Neural Networks-CNN) models to estimate reference quinoa ABVs at a 10 m spatial resolution from the crop canopy 3D model and classification, respectively. Secondly, several spectral and polarization/texture indices derived from Sentinel-2 and -1 images were integrated into three decision-tree-based machine-learning models (Random Forest-RF, Gradient Boosting-GB, eXtreme Gradient Boosting-XGB), and one CNN-based machine-learning model to estimate ABV. Additionally, a Stacking Model (STM) build on top of the three decision-tree-based models was considered for comparison. Model evaluation was also performed in a two-step approach. First, a 10-fold cross-validation strategy was used to highlight ABV sensitivity to Sentinel-2 and Sentinel-1 alone and in combination. Secondly, a Leave-One-Plot-Out Cross-Validation (LOPOCV) strategy was used to avoid autocorrelation between the training and evaluation dataset and therefore provided more insight into ABV mapping potential. The results showed that the combination of Sentinel-1 and Sentinel-2 features in the CNN model achieved the best predictive performance with R2 and RMSE values of 0.64 and 0.39 m3 ∙ 100 m−2, respectively. These findings highlight the potential of integrating multi-source information in advanced artificial intelligence algorithms for quinoa ABV monitoring, offering new insights toward the identification of sustainable practices across remote regions with complex socio-economic contexts.
Why it matches plant phenotyping methodsUAV画像・衛星センサー・機械学習を統合し、キノアの地上部バイオマス体積という植物形質を推定する手法を開発・比較検証しており、フェノタイピング手法が中心である。
abstractUAV RGB images were used in photogrammetric and deep-learning (Convolutional Neural Networks-CNN) models to estimate reference quinoa ABVs
Abstract Deep learning models have achieved near-perfect accuracy in plant disease classification within controlled laboratory settings; however, their deployment in real-world agricultural environments is severely hindered by the “deployment gap”—a critical vulnerability to environmental corruptions such as sensor noise, motion blur, and occlusion. To bridge this gap, we propose the Recurrent Active Vision Agent (RAVA), formulating the disease detection task as a Partially Observable Markov Decision Process (POMDP). Unlike passive Convolutional Neural Networks (CNNs) that process images globally, RAVA mimics the active inspection behavior of human agronomists. Our architecture integrates a lightweight ResNet-18 backbone with a Recurrent Neural Network (RNN) and a Spatial Transformer Network (STN). Driven by Proximal Policy Optimization (PPO), the agent learns a sequential policy to intelligently navigate and zoom in on informative “glimpses,” effectively bypassing background clutter. To stabilize the reinforcement learning process and enforce noise-invariant feature representations, we introduce a hybrid objective incorporating Supervised Contrastive Learning (SupCon). Comprehensive experiments on a combined PlantVillage and PlantDoc dataset demonstrate RAVA’s overwhelming superiority under extreme conditions. In a “Severe Degradation” stress test, standard ResNet-50 accuracy collapses to 26.3%, whereas our active agent maintains a robust 77.0%. Under extreme noise and occlusion, RAVA preserves 54.6% accuracy compared to the baseline’s 17.2%. Notably, this resilience is achieved with merely ∼12M parameters—significantly fewer than large-scale Vision Transformers—proving that active visual attention, coupled with contrastive learning, offers a computationally efficient and highly robust pathway for field-ready precision agriculture.
Why it matches plant phenotyping methods植物病害状態を画像から診断するための能動視覚手法を開発し、環境ノイズ下で性能検証している。植物病害の画像ベース表現型推定が中心である。
abstractwe propose the Recurrent Active Vision Agent (RAVA), formulating the disease detection task as a Partially Observable Markov Decision Process (POMDP).
Quantitative pollen viability analysis is a critical but labor-intensive step in plant reproductive biology. Existing deep-learning Segment Anything Models (SAM) fail to reliably segment viable pollen in Alexander-stained anthers. To address this, we fine-tuned an existing Cellpose-SAM model for pollen segmentation. We integrated it into PAT (Pollen Analysis Tool), a cross-platform desktop application. PAT features instance segmentation with interactive quality control, an in-app model retraining module, and publication-ready statistical outputs. We deployed PAT in an EMS suppressor screen of semi-sterile Arabidopsis smg7-6 mutants, enabling efficient candidate prioritization for whole-genome sequencing and mapping of the candidate mutation. This screen led to the identification of a point mutation in CAP-D2 (capd2-2), a Condensin I subunit, that rescues the smg7-6 meiotic phenotype. Notably, mutation in a Condensin II subunits (CAP-D3 and CAP-H2) does not confer rescue. Further characterization suggests the capd2-2 allele is hypomorphic, showing no defects in vegetative growth, chromocenter compaction, or transposable element silencing. Collectively, we demonstrate that accessible AI tools have the potential to bridge gaps in plant phenotyping and accelerate the pace of biological discovery.
Why it matches plant phenotyping methods花粉生存性を画像から自動推定するセグメンテーション手法とソフトウェアPATの開発が研究の中心であり、植物表現型計測ツールとして明確に該当する。
titlePAT: An Image Analysis Tool for Automated Scoring of Pollen in Alexander-Stained Anthers
Reproduction assets foundThe paper's Data availability statement explicitly deposits the authors' PAT pollen-phenotyping tool (the software implementing the paper's computational analysis, including the fine-tuned CPSAM segmentation model support) as open source on GitHub. Note: the full repository URL in the text (https://github.com/Riha-429[Code · public17
Data availability
428
Pollen Analysis tool (PAT) is available as open source tool at Github repository (https://github.com/Riha-429
Lab/Pollen-Analysis-Tool).
430
Figure legends
431
Fig. 1. Cellpose performance on Alexander-stained anther cross-sections across varying pollen
432
densities.
433
Representative cross-sections of Alexander-stained anthers showing a range of pollen densities, from
434
low (top rows, light staining) to high (bottom rows, dense reOpen asset ↗Pollen-Analysis-Toolpdf-raw-page:17 lines:1-64Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
ArabidopsisRootMorphology / geometry measurementSegmentationRoot system architecture
Introduction Plant parasitism by sedentary plant-parasitic nematodes is a dynamic and continuously evolving process, accompanied by profound remodelling of host root system architecture across distinct infection stages. However, the physiology and anisotropic growth of Arabidopsis thaliana roots under Heterodera schachtii infection, together with complex lateral root proliferation and increasingly dense, overlapping morphology, pose substantial challenges for accurate image segmentation. Methods Here, we introduce Root-TransUNet, an optimised segmentation architecture that extends TransUNet by incorporating a composite loss function to improve boundary precision and structural continuity, as well as dual-stage strip-pooling (SP) modules to enhance elongated and directional root features. These adaptations address the unique morphological complexity of the infected root system. Additionally, we integrated Root-TransUNet into a high-throughput phenotyping pipeline and applied it to an existing dataset of ~120,000 images of 362 A. thaliana MAGIC recombinant inbred lines collected over several months of infection. By extracting root system architecture traits, including root surface area and estimated root volume across infection stages, we enabled stage-specific association analyses between host root growth and nematode performance across these genotypes. Results Root-TransUNet achieved strong segmentation performance, demonstrating improved structural continuity and boundary precision compared with widely used CNN- and Transformer-based baselines, including UNet++. Stage-specific analyses revealed that the relationship between host root traits and nematode performance changed as infection progressed. During establishment, nematode number was largely independent of initial root size and varied strongly among genotypes, whereas during the reproductive phase (10-30 dpi), greater root expansion coincided with reduced estimated nematode volume accumulation. Notably, nematode burden was largely independent of host root size before infection, indicating that root quantity was generally not a limiting factor for infection in this experiment. Discussion These results demonstrate that Root-TransUNet can robustly segment infected root systems across a wide range of nematode infection densities, providing a scalable image-analysis framework for studying plant-parasitic nematode parasitism in combination with host root phenotyping.
Why it matches plant phenotyping methods感染根系の画像セグメンテーション手法を開発し、高スループット表現型解析パイプラインに統合して根系形態形質を抽出しており、表現型取得・抽出法が中心的である。
abstractHere, we introduce Root-TransUNet, an optimised segmentation architecture that extends TransUNet by incorporating a composite loss function to improve boundary precision and structural continuity, as well as dual-stage strip-pooling (SP) modules to enhance elongated and directional root features.
Reproduction assets foundThe paper analyzes a public BioImages dataset (S-BIAD2402) of ~400,000 RGB root/nematode infection images and provides authors' analysis code on GitHub; both are paper-specific, public, and actionable.Code · publicng molecular signatures, deepening our understanding of host-parasite resource allocation strategies, and establishing a foundation for the discovery of novel resistance mechanisms.
Code and data availability
Python-based source code for automating root analysis using the datasets above is accessible via our GitHub repository ( https://github.com/JieZhou1025/Root-nematode-interaction ).
Statements
Data availability statement
Publicly available datasets were analyzed in this study. This data can be found here: https://www.ebi.ac.uk/biostudies/bioimages/studies/S-BIAD2402 .
Ethics statement
The manuscript presents research on animals that do not require ethical approval for their study.
AuthorOpen asset ↗JieZhou1025/Root-nematode-interactionlines:412-424Plant phenotyping relevance match · UnverifiedCrossref · checked 15 Sept 2026
Overlapping cells in plant suspension-culture microscopy pose a particular challenge, for instance, segmentation because a single pixel may belong to more than one cell. Most standard instance-segmentation methods are not designed for this setting and tend to treat overlapping objects as mutually exclusive regions. We instead represent each cell as an independent full-cell instance and introduce MC-SlotNet, an architecture that separates competitive object-slot feature assignment from mask decoding. This allows multiple predicted masks to occupy the same image region. We further introduce a mask-level multiplicity-consistency loss that encourages the predicted number of masks covering a pixel to agree with the underlying cell occupancy. We evaluate MC-SlotNet on a newly annotated dataset of 53 Siraitia grosvenorii suspension-culture micrographs containing 4131 full-cell instances acquired at 4×–40× magnification. Using grouped five-fold cross-validation and an overlap-preserving evaluation protocol, we compare the method with Mask R-CNN, SOLOv2, and Mask2Former. MC-SlotNet achieves the best performance on AP50 (0.800), mAP50:95 (0.565), F150 (0.842), all-ground-truth Dice (0.761), AJI+ (0.754), overlap-region Dice (0.705), and overlap-instance recall (0.828). Its AP75 (0.649) is comparable to Mask2Former’s (0.651). MC-SlotNet also has the lowest inference time among the evaluated methods, at 1.113 s/image. These results indicate that decoding full-cell masks independently, rather than enforcing an exclusive partition of image pixels, is well-suited to instance segmentation in plant suspension-culture microscopy images with substantial cell overlap.
Why it matches plant phenotyping methods植物細胞の重複画像から個々の細胞を分割・抽出する新規モデルを開発し、データセット上で既存手法と比較評価しており、植物表現型取得法が研究の中心である。
abstractWe instead represent each cell as an independent full-cell instance and introduce MC-SlotNet, an architecture that separates competitive object-slot feature assignment from mask decoding.
Abstract Plant diseases substantially reduce global crop yields, and cotton production is particularly vulnerable to field-acquired variability in symptom appearance, background clutter, and illumination changes that limit the reliability and scalability of expert visual inspection. This study aimed to develop an accurate, computationally efficient, and explainable framework for real-time cotton leaf disease recognition that is suitable for deployment on resource-constrained edge devices. Using the SAR-CLD-2024 dataset (322 RGB images captured under natural agricultural conditions across seven categories, including healthy and diseased leaves), images were preprocessed via resizing and normalization and augmented online in the training set (random rotations, flips, brightness/contrast adjustments, and random cropping). An EfficientNet-B3 backbone initialized with ImageNet-pretrained weights was fine-tuned using categorical cross-entropy loss and Adam optimization, with early stopping, checkpointing, regularization, and a fixed-seed 70/15/15 train–validation–test partition to enhance reproducibility and reduce leakage. Performance was evaluated on an independent test set using accuracy, precision, recall, F1-score, MCC, balanced accuracy, Cohen’s kappa, confusion matrix, multi-class ROC/AUC, and precision–recall analysis, alongside computational benchmarking (parameters, FLOPs, memory, and inference latency) and comparative experiments against contemporary CNN, lightweight, and transformer-based models. The model showed stable convergence over 30 epochs with a small training–validation gap, predominantly correct predictions with limited confusion among visually similar classes, consistently high precision–recall behavior under moderate class imbalance, and stable performance across repeated runs with low variability and a tight confidence interval. Grad-CAM heatmaps localized necrotic lesions, discoloration, and infected tissues while largely ignoring background, and failure cases were associated with early-stage symptoms, occlusion, shadows, and inter-class similarity. Overall, the framework provides a reproducible, interpretable, and efficient solution for cotton leaf disease classification with practical implications for trustworthy, low-latency, on-device decision support in precision agriculture.
Why it matches plant phenotyping methods綿葉の病徴を画像から分類する深層学習手法の開発が中心で、独立テスト、比較評価、計算性能評価、Grad-CAMによる病徴局在化を実施しているため、植物病害フェノタイピング手法に該当する。
abstractThis study aimed to develop an accurate, computationally efficient, and explainable framework for real-time cotton leaf disease recognition
Reproduction assets foundThe paper's Data Availability statement explicitly names the SAR-CLD-2024 cotton leaf dataset used for all experiments as publicly available on Kaggle with a direct URL. No author analysis code or trained model checkpoint is deposited.Dataset · publicntribute to the development of fully automated, scalable, and real-time smart agriculture
systems.
Declaration
Funding
Datta Meghe Institute of Higher Education and Research Wardha, Maharashtra, India
Data Availability: The SAR-CLD-2024 cotton leaf dataset used in this study is publicly
available through the Kaggle platform at: https://www.kaggle.com/datasets/pantho12/sar-cld-2024-dataset-for-cotton
This dataset includes annotated images of various cotton leaf diseases collected under diverse
environmental conditions. All data utilized in this work are freely accessible, and the data
processing methodology has been described in detail to facilitate reproducibility.
Conflict of interest The aOpen asset ↗Kaggle · SAR-CLD-2024pdf-raw-page:32 lines:1-38Plant phenotyping relevance match · UnverifiedEurope PMC · Crossref · checked 15 Sept 2026
Plant diseases pose a serious threat to agriculture, causing yield losses of 20 to 40 percent each year, resulting in more than 220,000 million dollars in economic damage and significantly affecting the global food supply. Traditional plant health monitoring practices involve visual inspection of plant tissue and can only detect the presence of disease once visual symptoms are already evident. This article presents AgriIDIA, an early-detection plant disease recognition system trained on datasets of 24-channel multispectral images derived from six optical filters (BlueIR, Hotmirror, K590, K665, K720, and K850) and six vegetation indices (NDVI, GNDVI, NDRE, EVI, REI, and SAVI). First, an exploratory data analysis is conducted on the diagnostic capability of the described 24-channel data representation, using 1,266 image stacks labeled with six classes (diseased/healthy papaya, diseased/healthy potato, diseased/healthy tomato). Next, using the results of the exploratory data analysis, the manuscript describes the training and cross-validation performance of AgriIDIA, with a macro-F1 score of 83.91 ± 3.42% and an accuracy of 84.00 ± 3.17% on the validation set. Finally, the performance of the trained model is evaluated on the reserved test set (N=190), demonstrating an accuracy of 81.05%, a macro-F1 score of 0.7398, and a weighted ROC-AUC of 0.9383. The results of this study suggest that the 24-channel multispectral representation has significant diagnostic potential for the early detection of plant diseases and can be used to design accessible phytosanitary methods for small-scale farmers.
Why it matches plant phenotyping methods多チャネルマルチスペクトル画像から植物病害状態を推定する認識システムの開発・検証が研究の中心であり、植物表現型として病害状態を直接評価している。
abstractThis article presents AgriIDIA, an early-detection plant disease recognition system trained on datasets of 24-channel multispectral images
Early detection of tree-seedling establishment is essential for monitoring regeneration success in coastal-dune plantations, where conventional field assessments remain labour-intensive and spatially limited. This study presents a deep-learning workflow for detecting early-stage Pinus pinaster seedlings using multispectral UAS-derived point clouds. Field surveys in the Quiaios National Forest, Portugal, mapped approximately 1500 seedlings using RTK GNSS positioning, biometric measurements, and field photographs. Multispectral imagery acquired with a DJI Mavic 3 Multispectral platform was processed through Structure-from-Motion to generate calibrated orthomosaics, terrain products, and dense point clouds. Training-data preparation combined pine-centred buffers, spectral conditioning, manual refinement and point-cloud class assignment. Point Transformer V3 models were trained in ArcGIS Pro and evaluated using field-mapped buffers withheld from model training within plantation-line areas. The Baseline high-recall model achieved 88% object-level recall at the operational threshold of at least three classified Pine-Seedling points per buffer. The refined hard-negative model retained 84% recall while reducing off-buffer detections from 243 to 41. False-negative analysis showed that omissions were associated with reduced crown diameter and limited branch development under the adopted buffer-based retrieval framework. These results support transformer-based multispectral point-cloud classification for scalable monitoring of early-stage pine regeneration in heterogeneous coastal environments.
Why it matches plant phenotyping methodsUASマルチスペクトル点群とPoint Transformer V3により、マツ幼苗の存在・定着状態を植物個体レベルで推定する手法を開発・評価しており、検出性能も検証しているため、植物フェノタイピング手法が中心である。
abstractThis study presents a deep-learning workflow for detecting early-stage Pinus pinaster seedlings using multispectral UAS-derived point clouds.
Near-infrared imagery is essential for vegetation monitoring, precision agriculture, and environmental remote sensing, but multispectral UAV systems remain significantly more expensive and less accessible than conventional RGB imaging platforms. This study presents a lightweight artificial intelligence framework for reconstructing the NIR spectral band exclusively from the red spectral band acquired by a UAV. The proposed methodology formulates the reconstruction task as a pixel-wise nonlinear regression problem and employs a compact multilayer perceptron (MLP) containing only 609 trainable parameters, without exploiting spatial neighborhood information. The framework was developed and evaluated using 280 synchronized multispectral UAV image sets acquired with a DJI Phantom 4 Multispectral platform over a heterogeneous agricultural landscape in the Republic of Moldova. Of these, 252 image sets were used for model development, and 28 were reserved as a held-out within-mission test subset. Quantitative evaluation on a held-out test dataset from the same acquisition mission yielded a mean squared error of 0.010329, a root mean squared error of 0.101632, a mean absolute error of 0.079883, a coefficient of determination of 0.253383, and a Pearson correlation coefficient of 0.683637 between measured and reconstructed normalized NIR digital intensities. The results indicate that the model captures part of the red–NIR relationship under the evaluated acquisition conditions; however, the moderate coefficient of determination suggests that the reconstructed values are an approximation rather than a replacement for measured NIR observations. An illustrative NDVI-based assessment showed that broad spatial vegetation patterns remained identifiable. Rather than introducing a new neural network architecture, this work establishes a compact empirical baseline to investigate the practical performance and limitations of pixel-wise NIR reconstruction from a single red-band value with minimal model complexity.
Why it matches plant phenotyping methodsUAV画像からNIRを再構成し、NDVIを含む植生状態の推定に用いる計算・センシング手法が研究の中心で、独立データによる技術評価も行っている。
abstractThis study presents a lightweight artificial intelligence framework for reconstructing the NIR spectral band exclusively from the red spectral band acquired by a UAV.
This work presents a gold nanoparticle (Au NP)-boosted disposable paper-based electrochemiluminescence (ECL) biosensor for minimally invasive on-leaf in situ detection of endogenous H 2 O 2 in tomato leaves. The inherent capillary action of filter paper (FP) was employed to simplify reagent delivery, while gold nanoparticles (Au NPs) catalytically activated H 2 O 2 to generate reactive oxygen species, thereby driving the ECL signal output. This simple, low-cost paper-based platform enabled time-resolved monitoring of H 2 O 2 in stressed plants, providing a reliable in situ strategy for evaluating tomato physiology and early disease/pest warning.
Why it matches plant phenotyping methodsトマト葉内のH2O2という植物生理状態をその場で測定する紙ベースECLバイオセンサーの開発が中心であり、植物フェノタイピング手法に該当する。
abstractThis work presents a gold nanoparticle (Au NP)-boosted disposable paper-based electrochemiluminescence (ECL) biosensor for minimally invasive on-leaf in situ detection of endogenous H 2 O 2 in tomato leaves.
Raman / spectroscopyLeafTissuePhysiological trait estimationLeaf traitsWater status / transpiration
Phenotyping extensive populations remains a major constraint in tree breeding programmes, particularly due to the time-consuming and labour-intensive nature of conventional methods. Near infrared (NIR) spectroscopy, which is a high-throughput phenotyping method, offers an alternative solution, providing a rapid and cost-effective approach for assessing growth- and function-based traits on large numbers of trees. This study aimed to evaluate the potential of NIR spectroscopy-based models for predicting such traits in Larch. Specifically, delta carbon-13 ( δ 13 C), carbon (C), nitrogen (N), specific leaf area (SLA), leaf dry matter content (LDM), and phenolics on needles; the branch hydraulic trait (P 50 ), and lignin and hydroxyphenyl/guaiacyl (H/G) ratio on wood cores from an experimental study on Larix species were predicted using multivariate modelling, specifically, partial least squares regression. Reliable models were obtained for N content (R 2 training = 0.95, r 2 testing = 0.94), lignin (R 2 training = 0.95, r 2 testing = 0.94), and H/G ratio (R 2 training = 0.88, r 2 testing = 0.89), while moderate predictive performance was observed for C content (R 2 training = 0.79, r 2 testing = 0.79) and δ 13 C (R 2 training = 0.76, r 2 testing = 0.69). This methodological approach and its results encourage the transition from traditional laboratory methods to efficient, large-scale-based trait evaluation techniques in forestry.
Why it matches plant phenotyping methodsNIR分光とPLS回帰を用いて樹木の複数形質を大規模推定する手法を評価しており、表現型取得・推定法が研究の中心である。
abstractNear infrared (NIR) spectroscopy, which is a high-throughput phenotyping method, offers an alternative solution, providing a rapid and cost-effective approach for assessing growth- and function-based traits on large numbers of trees.
Field / plotLeafClassificationDisease symptoms / severity
Early and accurate detection of plant diseases is critical in precision agriculture to improve crop management and yield. Mungbean ( Vigna radiata L.) is highly susceptible to several foliar diseases, including yellow mosaic, powdery mildew, leaf crinkle, and cercospora leaf spot, which cause substantial productivity losses. Despite expanding applications of deep learning in plant disease diagnosis, systematic multi-architecture evaluation for mungbean disease classification under natural field conditions remains limited. This study addresses this gap by evaluating five state-of-the-art deep convolutional neural network (DCNN) architectures on a large-scale, field-acquired mungbean dataset that captures real-world variability across environmental conditions and disease severity levels, distinguishing it from controlled laboratory studies. A total of 5,617 original images across five classes were used. Data augmentation was applied exclusively to the training subset after stratified splitting to prevent data leakage. The dataset was partitioned into training (70%), validation (15%), and testing (15%) subsets. VGG16, VGG19, ResNet50V2, DenseNet121, and InceptionV3 were evaluated using identical transfer learning and fine-tuning protocols. Model performance was assessed using AUC-ROC, Cohen's kappa coefficient, McNemar's test for pairwise statistical comparisons, five-fold cross-validation, and Grad-CAM-based interpretability. On the independent test set, InceptionV3 achieved the highest accuracy (98.47%) and macro-F1 (98.49%), followed by VGG16 (98.36%) and VGG19 (97.89%). AUC-ROC values exceeded 0.997 for all models, confirming excellent class discrimination. Grad-CAM visualizations further confirmed that model predictions were based on biologically relevant disease symptoms. The findings demonstrate the effectiveness of deep learning for robust disease recognition under realistic field conditions and highlight the potential of AI-based diagnostic tools for crop health monitoring, precision agriculture, and decision-support systems in mungbean production.
Why it matches plant phenotyping methods圃場画像からマングビーン葉の病徴・病害状態を推定する深層学習手法を複数モデルで評価・検証しており、植物病害フェノタイピング手法が中心です。
abstractsystematic multi-architecture evaluation for mungbean disease classification under natural field conditions remains limited
Growth chamberMultimodalStereoRootStem / branchTrackingGrowth / development / phenology
Understanding plant behaviour requires the integration of multiple phenotypic and physiological signals measured over time under controlled conditions. However, different plant signals are typically studied using separate experimental setups, limiting temporal alignment and integrative analyses.We present Mind(the)Plant, a modular experimental facility designed for the synchronized, long-term acquisition of multimodal plant data, including three-dimensional shoot kinematics, above- and below-ground volatile organic compounds (VOCs) and root imaging. Its modular architecture is designed to accommodate additional acquisition modules, such as electrophysiological signalling, as future extensions. The platform integrates a controlled growth environment with stereovision imaging, high-resolution time-of-flight mass spectrometry and custom rhizocameras. These components are connected through a unified network infrastructure that ensures synchronized acquisition and centralized data handling.We validate the performance of each acquisition module through multi-week recordings, demonstrating high-temporal stability, reliable stereovision synchronization, effective isolation of VOCs signals and robust operation of below-ground imaging. We further illustrate the analytical potential of the platform using a one-day continuous multimodal acquisition combining shoot kinematics, above-ground VOC emissions, rhizocameras observations and environmental data.Mind(the)Plant provides a novel methodological framework for studying plant behaviour, signalling and phenotypic plasticity in ecological and evolutionary research. By enabling coordinated measurements of multiple plant response modalities, the platform supports investigations of dynamic plant-environment and plant-plant interactions from a behavioural perspective.
Why it matches plant phenotyping methods植物の複数の表現型・生理シグナルを同期取得する施設を開発し、各取得モジュールの性能を検証しているため、表現型計測プラットフォームが研究の中心です。
abstractWe present Mind(the)Plant, a modular experimental facility designed for the synchronized, long-term acquisition of multimodal plant data, including three-dimensional shoot kinematics, above- and below-ground volatile organic compounds (VOCs) and root imaging.
Reproduction assets foundThe paper's data availability statement explicitly deposits data, code and processing pipelines (supporting the multimodal plant phenotyping measurements and analysis) in a public Zenodo archive with an authors' URL matching an allowed URL.Code · publicf Interest Statement
The authors have no conflicts of interest to declare.
Peer Review
The peer review history for this article is available at https://www.webofscience.com/api/gateway/wos/peer-review/10.1111/2041-210x.70411 .
Data availability Statement
Data, code and processing pipelines supporting this study are available at https://doi.org/10.5281/zenodo.22095454 ( Simonetti & Castiello, 2026 ).
References
Avesani S, Bonato B, Simonetti V, Guerra S, Ravazzolo L, Gjinaj G, Dadda M, Castiello U. Comparing proton transfer reaction (PTR) and adduct ionization mechanism (AIM) for the study of volatile organic compounds. Molecules. 2026;31(3):402. doi: 10.3390/molecules31030402.
Baluška F, LeOpen asset ↗zenodo · 10.5281/zenodo.22095454lines:482-508Plant phenotyping relevance match · UnverifiedOpenAlex · checked 15 Sept 2026
Automated fruit counting and yield estimation systems are necessary for efficient orchard management. This study presents a computer vision system based on video multi-object-tracking for fruit load estimation in apple orchards and provides a comprehensive analysis of the system performance under diverse scanning conditions. The system integrates fruit detection, tracking, localization within orchard, and fruit load map generation. Experiments were carried out in an experimental apple orchard containing 420 apple trees. Data was collected with two different RGB-D sensors (Azure Kinect DK and ZED 2) at three different scanning distances (125 cm, 175 cm, and 225 cm) on two different dates prior to the harvest. Comparing the two evaluated sensors, Azure Kinect provided more consistent performance across different dates. Results also show that the longer scanning distance improves accuracy due to seeing the full tree view gives better fruit counts than close partial views. Between the two dates, best results were achieved near harvest due to fruit color at this stage, achieving a Mean Absolute Percentage Error (MAPE) of 6.91 % and a determination coefficient (R 2 ) of 0.733 (using ZED2 sensor at 225 cm distance). Finally, a test comparing scanning from one or both sides of the tree row showed that bilateral scanning improved fruit load estimation at the stretch level by incorporating information from both sides of the canopy. The results of this work demonstrate the effectiveness of the video fruit tracking systems as a useful tool for automating fruit load estimation.
Why it matches plant phenotyping methods動画ベースの果実検出・追跡手法を開発・評価し、リンゴ樹の果実負荷量を推定することが研究の中心であるため、植物フェノタイピング手法として含める。
abstractThis study presents a computer vision system based on video multi-object-tracking for fruit load estimation in apple orchards and provides a comprehensive analysis of the system performance under diverse scanning conditions.
Standardized extraction of quantitative phenotypes from images is increasingly important across plant biology, from ecological and evolutionary studies to genetics, breeding, and functional genomics. However, as large image datasets are increasingly used for trait analysis, many biologically relevant traits, including size, shape, color, and spatial patterning, are still measured manually or using fragmented semi-automated workflows. These limitations reduce throughput, reproducibility, and accessibility, especially for researchers without computational expertise. Here, we present BioIMA, an open-source desktop tool for rapid and standardized phenotyping from biological images. BioIMA integrates foundation model-based segmentation with automated trait computation, allowing users to extract quantitative measurements from images through an intuitive graphical interface and without model training. To validate its performance, we quantified a set of knot morphological traits in two Populus species, as these measurements are typically time-consuming to perform manually. Automatic measurements showed strong agreement with manual ImageJ-based measurements (R2 > 0.95), while reducing per-image processing time by approximately 75% (from ~15 s to ~4 s). BioIMA was further applied to diverse plant datasets, including Helianthus and Rhododendron images with varying morphologies and background conditions. Although developed for plant phenotyping, BioIMA may also be extended to other biological samples where region-based size, shape, or color traits are of interest. By combining accessibility and standardization in a lightweight local application, BioIMA provides a practical community resource for image-based phenotyping in ecological and evolutionary studies.
Why it matches plant phenotyping methods植物画像から形態形質を自動抽出するツールの開発と、手動測定との性能検証が中心であるため。
abstractHere, we present BioIMA, an open-source desktop tool for rapid and standardized phenotyping from biological images.
Reproduction assets foundThe paper's own phenotyping tool BioIMA (source code, documentation, example datasets, and user manual) is publicly available on the authors' GitHub repository, directly supporting the paper's image-based trait extraction and validation analyses.Code · publicis powered by embedded models
97
currently including SAM (Kirillov et al., 2023) and mobile SAM (Zhang et al., 2023),
98
which are executed locally through ONNX Runtime for efficient inference without
99
internet connectivity. Source code, documentation, example datasets, and a user manual
100
are publicly available on GitHub (https://github.com/jingwanglab/BioIMA).101
preprint (which was not certified by peer review) is the author/funder. All rights reserved. No reuse allowed without permission.
The copyright holder for this
this version posted September 3, 2026.
;
https://doi.org/10.64898/2026.08.30.747465
doi:
bioRxiv preprintOpen asset ↗jingwanglab/BioIMApdf-raw-page:4 lines:1-60Plant phenotyping relevance match · UnverifiedOpenAlex · checked 15 Sept 2026
Leaf hyperspectral reflectance can provide a scalable way to estimate photosynthetic capacity (Vcmax), but models trained in one species or measurement context often lose accuracy in another. This transfer problem limits the use of spectral approaches in multi-species crop phenotyping and carbon-cycle applications. Here, we tested physiology-informed inputs for leaf-level Vcmax25 retrieval using paired gas-exchange and reflectance data from wheat (C₃; n = 198) and maize (C₄; n = 81) grown under contrasting nitrogen supply. The four input configurations were raw spectra (Mod1), spectra scaled by a PPFD–absorptance proxy (Mod2), scaled spectra augmented with radiative-transfer-derived traits (Mod3), and scaled spectra augmented with a spectral coordination proxy (Mod4). Within datasets, the best models reached R² = 0.82 in wheat, 0.41 in maize, and 0.76 in the combined dataset. In a matched comparison with a common random-forest learner, the spectral coordination proxy Mod4 improved accuracy only slightly over Mod2 in wheat (RMSE −0.51%; p = 0.0058) and maize (RMSE −1.26%; p = 0.0011) but not in the combined dataset (RMSE −0.15%; p = 0.074), and the trait-based Mod3 showed no consistent benefit. When wheat models were tested on measurement dates not used in training, accuracy remained moderate (R² = 0.563; RMSE = 15.07 µmol m⁻² s⁻¹). Despite this within-dataset performance, models applied to the other species without calibration failed in both directions (negative R²), and adding source-species data did not improve prediction even when a few samples of the new species were used for calibration. These results show that physiology-informed input design provides at most small within-dataset gains, and that reliable prediction across C₃ and C₄ crops requires calibration data from the target crop.
Why it matches plant phenotyping methods葉のハイパースペクトル反射から光合成能力Vcmaxを推定する手法を開発・比較・検証しており、植物形質取得が研究の中心です。
abstractLeaf hyperspectral reflectance can provide a scalable way to estimate photosynthetic capacity (Vcmax)
Abstract Accurate leaf instance segmentation is fundamental to quantifying morphological and structural traits in image-based plant phenotyping. However, substantial variations in leaf scale, shape, and orientation, together with dense overlap and occlusion, often lead to ambiguous instance boundaries. In addition, repeated downsampling and feature reconstruction can progressively erode fine structural details, hindering contour preservation and the separation of adjacent leaves. To address these interrelated challenges, we propose DMSHA-Net, a dynamic multi-scale feature fusion and hierarchical attention network for leaf instance segmentation. Its direction-aware Multi-Scale Feature Aggregation (MSFA) encoder captures complementary horizontal and vertical contextual information across multiple receptive-field scales, thereby improving the representation of diverse leaf morphologies. The Dense Feature Aggregation (DFA) decoder selectively integrates deep semantic and shallow structural features through stage-specific attention mechanisms, where self-attention at coarse resolutions models long-range dependencies, whereas lightweight channel recalibration at high resolutions refines local structures and boundaries. The Learnable Feature Fusion (LFF) module subsequently integrates multi-level semantic and boundary features using normalized learned weights. DMSHA-Net achieves Best Dice (BD) scores of 93.17%, 85.12%, and 90.91% on KOMATSUNA, MSU-PID, and the CVPPP-A1 subset, respectively, with corresponding foreground–background Dice (FBD) scores of 98.19%, 91.02%, and 98.24%. These results indicate that DMSHA-Net achieves competitive segmentation performance across the three datasets, particularly in scenarios involving pronounced scale variation and dense leaf overlap.
Why it matches plant phenotyping methods植物画像から葉の個体セグメンテーションを行い、形態・構造形質の定量化に用いる新規ネットワークを開発・評価しており、表現型取得手法が中心です。
abstractAccurate leaf instance segmentation is fundamental to quantifying morphological and structural traits in image-based plant phenotyping.
In situ monitoring of plant responses to stress is one of the most challenging aspects of precision agriculture, and the dynamic control of crop growth according to fluctuating environmental factors. Although fluorescence imaging provides a nondestructive approach for monitoring stress-related biomarkers, its performance is often hindered by the low abundance of endogenous signaling molecules and strong tissue autofluorescence. Here, we report a microneedle-integrated sensing platform that enables sensitive detection of endogenous hydrogen peroxide (H 2 O 2 ) in living plants. The platform incorporates a second near-infrared fluorescent nanoprobe composed of Er 3+ -doped lanthanide nanoparticles emitting at 1550 nm and Mo-doped polymetallic oxomolybdates serving as the H 2 O 2 -responsive unit. Embedding the nanoprobe into custom-fabricated microneedles allows precise positioning on plant midribs for continuous monitoring of H 2 O 2 dynamics. Under stress conditions, the system successfully visualized spatiotemporal fluctuations of H 2 O 2 in living tomato, spinach, and tobacco plants. This work establishes a strategy for early stress diagnosis and developing universal plant health monitoring technologies.
Why it matches plant phenotyping methods植物ストレス状態を生体内H2O2として連続取得・可視化するマイクロニードル統合センシング基盤の開発が中心であり、単なる生物学的測定ではない。
abstractHere, we report a microneedle-integrated sensing platform that enables sensitive detection of endogenous hydrogen peroxide (H 2 O 2 ) in living plants.
Abstract Maize is the staple crop for millions of people in Sub-Saharan Africa, particularly for Zambia. Unfortunately, maize crops are exposed to several serious threats due to their susceptibility to foliar diseases like Maize Rust, Leaf Blight, Leaf Spot, Maize Streak Virus, and Maize Lethal Necrosis that may lead to great yield losses. Conventional methods of crop disease identification consist of field surveys that are not only subjective but also difficult to conduct for smallholder farmers. This paper presents the design and evaluation of a highly optimized version of the EfficientNet-B0 Convolutional Neural Network for the automatic detection of maize leaf diseases using maize leaf images obtained from real-world scenarios. The proposed model utilized the concept of transfer learning with ImageNet pre-trained weights and was trained on the Mendeley Maize Crop Disease (Leaf) Dataset which consists of 30,120 images in nine maize disease classes. The developed fine-tuned EfficientNet-B0 yielded 97.57% classification accuracy, macro precision of 97.61%, macro recall of 97.64%, and macro F1-score of 97.61%. From these results, it is evident that transfer learning and fine-tuning greatly boost maize disease classification accuracy while ensuring high computational efficiency. This study makes a significant contribution to precision agriculture as it offers an accurate and computationally efficient AI-based maize disease classification model, which could help smallholder farmers in early maize disease classification.
Why it matches plant phenotyping methodsトウモロコシ葉画像から病害状態を推定する深層学習モデルを開発・評価しており、植物病害表現型の取得・分類手法が中心的な研究です。
abstractThis paper presents the design and evaluation of a highly optimized version of the EfficientNet-B0 Convolutional Neural Network for the automatic detection of maize leaf diseases using maize leaf images obtained from real-world scenarios.
Reproduction assets foundThe paper's sole qualifying asset is the public Mendeley Maize Crop Disease (Leaf) Dataset of maize leaf images used for all phenotyping/classification measurements, explicitly declared publicly available with a URL. No author analysis code, trained model checkpoints, or other paper-specific assets are disclosed.Dataset · publiconflicts of interest to publish the paper.
Consent to Publish
All authors have read and approved the final version of the manuscript and agree to its
submission to Discover Networks.
Consent to Participate
Not applicable
Data Availability
The Mendeley Maize Crop Disease (Leaf) Dataset used in this study is publicly available at
https://data.mendeley.com/datasets/6w6gsvghfw
Clinical Trial Number
Not applicable.
Ethics Declaration:
Not applicable.
Competing interests
All authors declare no competing interests.Open asset ↗Mendeley · 6w6gsvghfwpdf-raw-page:55 lines:1-22Plant phenotyping relevance match · UnverifiedCrossref · checked 15 Sept 2026
Brown Rot (Monilinia spp.) and Leaf Curl (Taphrina deformans) are principal fungal diseases affecting peach (Prunus persica L. Batsch) production, lacking validated AI-based diagnostic tools in tropical highland orchards. This study presents a compact Convolutional Neural Network (3658 trainable parameters), applied identically to fruit and leaf classification, integrated with a background-removal preprocessing pipeline and evaluated through stratified 5-fold cross-validation on 800 in-situ images from four orchards in Cómbita and Choachí, Colombia. The proposed architecture achieved mean accuracies of 82.8% (fruit) and 95.3% (leaf), with AUC values of 0.87 and 0.98, and a trained model footprint of approximately 100 KB, supporting storage- and bandwidth-efficient deployment. Benchmarked against ImageNet-pretrained MobileNetV3-Small and MobileNetV2 under an identical protocol, the proposed architecture matched or exceeded MobileNetV3-Small on leaf classification despite a 257-fold smaller parameter count, and achieved comparable or lower inference latency than both larger backbones. To our knowledge, this is the first validated system for simultaneous detection of both pathogens in Prunus persica under real field conditions, combining a compact, deployment-ready architecture with an ablation-verified preprocessing pipeline. The proposed model was deployed in the DurAPP web platform, giving peach growers in tropical highland regions a practical, low-footprint diagnostic tool suited to smallholder farming conditions.
Why it matches plant phenotyping methodsモモ果実・葉の病徴を画像から分類するCNN、前処理、交差検証、他モデル比較、実地検証、プラットフォーム展開が中心であり、植物病害状態の画像ベースフェノタイピング手法に該当する。
abstractThis study presents a compact Convolutional Neural Network (3658 trainable parameters), applied identically to fruit and leaf classification, integrated with a background-removal preprocessing pipeline and evaluated through stratified 5-fold cross-validation on 800 in-situ images from four orchards
Occlusion is a major factor limiting accurate three-dimensional (3D) wheat phenotyping. In natural growth conditions, overlapping spikes, leaves, and stems often make only partial target regions visible in single-view images, hindering complete and reliable 3D reconstruction. To address this problem, this study proposes an amodal completion-assisted, sequential framework for single-view 3D reconstruction of occluded wheat. The framework first uses visible prompts to recover the complete appearance and structural cues of occluded targets, and then feeds the completed images into single-view 3D reconstruction models to generate complete 3D structures. We construct the MMWO (Multi-view Multi-instance Wheat Occlusion) dataset from MMW, which is captured under controlled indoor scenarios, by synthesizing diverse occlusion samples through organ-level cutouts, random geometric transformations, and region-constrained pasting, with annotations including visible masks, occlusion masks, and complete target images. Six representative reconstruction methods, including Direct3D, Real3D, SF3D, Spar3D, TRELLIS.2, and Hunyuan3D, are systematically evaluated. Hunyuan3D achieves the best geometric performance, with the lowest mean CD- \(L_1\) and CD- \(L_2\) values of 0.1286 and 0.0536, and the highest mean F-score of 0.5668. SF3D achieves the best rendering quality in terms of PSNR, SSIM, and LPIPS. In addition, Pix2Gestalt completion reduces the estimation errors of spike length, width, and area from 9.31%, 10.89%, and 32.23% to 4.64%, 9.70%, and 9.45%, respectively. These results demonstrate that amodal completion can effectively alleviate occlusion-induced information loss and provide more complete structural priors for single-view 3D wheat reconstruction. This study offers a feasible solution for 3D wheat phenotyping under occlusion and provides a systematic reference for applying 3D generative models to agricultural phenotyping.
Why it matches plant phenotyping methods遮蔽下の単一画像から小麦器官を3D再構成し、形質推定精度を改善する手法を開発・比較検証しており、植物フェノタイピング手法が中心である。
abstractTo address this problem, this study proposes an amodal completion-assisted, sequential framework for single-view 3D reconstruction of occluded wheat.
Background Olive ( Olea europaea L.) breeding initiatives rely heavily on the extensive and correct characterisation of genetic resources to successfully achieve their goals, such as addressing climate change and emerging diseases challenges. However, the historical lack of standardised phenotyping protocols across multi-environment trials has severely hindered data interoperability and large-scale comparative analyses. Methods Within the Horizon 2020 GEN4OLIVE project, five international olive germplasm banks established a consensus-based methodological framework to systematically evaluate over 500 olive cultivars. We harmonised 14 evaluation protocols covering six fundamental dimensions: phenological and agronomic traits, abiotic stress resilience, biotic stress resilience, olive oil yield and chemical quality, table olive quality assessment, and morphological characterisation and photography. While most protocols were adapted from previously published literature to ensure ease of implementation across different facilities, novel methodologies for frost tolerance and standardised photography were developed de novo. Results The implementation of these consensus methods across five countries proved highly successful. This methodological framework enabled the generation of the largest harmonised, publicly available dataset on olive genetic resources to date, effectively making possible the correct comparation and ranking of the olive cultivars based on their specific characteristics. Conclusions This compendium of methods provides a robust, highly replicable reference point for the standardisation of olive germplasm characterisation and use of shared benchmark cultivars as an effective way for data normalization and comparation. It facilitates future global pre-breeding efforts, ensures international data interoperability, and supports the discovery of resilient cultivars to secure the future of the olive sector.
Why it matches plant phenotyping methodsオリーブ遺伝資源の標準化フェノタイピングプロトコルを体系化し、複数機関で実装・検証して大規模データセットを生成した方法論中心の研究である。
abstractthe historical lack of standardised phenotyping protocols across multi-environment trials has severely hindered data interoperability and large-scale comparative analyses.
Reproduction assets foundThe article declares two paper-specific public assets: the GEN4OLIVE phenotypic dataset from evaluating over 500 olive accessions across five germplasm banks, hosted on the project's Olive Varieties Database, and a Zenodo-deposited methodological handbook (Extended Data) containing the 14 protocols, visual assessment, Dataset · publicData and software availability
The phenotypic dataset generated from the evaluation of over 500 olive varieties across the five Mediterranean
germplasm banks using this compendium of protocols and methodologies, is publicly available via the GEN4OLIVE
project repository.
• Repository: GEN4OLIVE Olive Varieties Database.
• Link: https://www.uco.es/ucolivo/gen4olive/olivevarieties (GEN4OLIVE Database, 2025).
Page 8 of 15
Open Research Europe 2026, 6:322 Last updated: 14 SEP 2026Open asset ↗GEN4OLIVE Olive Varieties Databasepdf-raw-page:8 lines:1-44Plant phenotyping relevance match · UnverifiedOpenAlex · checked 15 Sept 2026
Modern crop breeding demands precise organ-level analysis for trait quantification, making plant point cloud segmentation (PPCS) increasingly important. However, conventional deep learning approaches rely heavily on densely annotated datasets that are labor-intensive to acquire. Unified PPCS adaptation from distribution-shifted examples with minimal additional training remains challenging. To address this, we propose PlantC2USeg, a deep transfer learning framework featuring cross-scale consistency learning to explicitly align features across spatial scales and an information-restricted decoding strategy that prevents reconstruction shortcuts and promotes robust adaptation. The resulting pre-training enables stable few-shot generalization across species and sensing conditions, while unified fine-tuning with inherited thresholds further reduces adaptation overhead. Under full supervision on Soybean3D, PlantC2USeg achieves the highest semantic IoU and instance mWCov among compared methods, at 91.91% and 94.62%. With 20 labeled samples, it leads both metrics at 89.78% and 90.27%; with only 10 samples, it retains the highest mWCov of 83.23% while achieving 83.19% IoU. Across HR3D, 10-shot transfer to tobacco, tomato, and sorghum averages 78.41% IoU and 79.42% mWCov, while 22-shot transfer to SYAU-Maize achieves the highest IoU and mRec at 92.75% and 93.51%. Furthermore, a leading category-averaged mIoU of 85.0% on ShapeNet Part demonstrates the framework's capability to handle diverse shape variations beyond agricultural domains. These results demonstrate that PlantC2USeg reduces overall adaptation effort under distribution shifts, enabling scalable plant phenotyping and transferable 3D representation learning beyond agriculture.
Why it matches plant phenotyping methods植物点群の器官レベル形質定量を目的とするセグメンテーション手法を開発し、複数データセット・作物・ショット条件で性能評価しているため、植物フェノタイピング手法が中心である。
abstractwe propose PlantC2USeg, a deep transfer learning framework featuring cross-scale consistency learning
To enhance crop performance, intercropping strategies leverage volatile organic compound (VOC)-driven interactions with companion plants that constitutively emit VOCs. Despite the agricultural importance, the mechanisms and kinetics of VOC-mediated sensory transduction in receiver plants eavesdropping on neighbouring non-kin emitters remain largely unknown due to a lack of appropriate non-destructive analytical tools. In this work, we employ multiplexed salicylic acid (SA) and H 2 O 2 nanosensors in Brassica rapa subsp. Chinensis (pak choy) plants to visualize, in real time, reactive oxygen species (ROS) and SA signal transduction following exposure to constitutively-released VOCs from neighbouring aromatic plants-namely sweet basil and spearmint. Unique emitter-specific temporal signatures of ROS and SA were observed in receiver pak choy: sweet basil VOCs induced concomitant generation of ROS and SA at 30 min, whereas spearmint VOCs triggered SA production at 30 min, followed by ROS accumulation. The temporal data enabled the formulation of a diffusion model that quantifies the VOC perception threshold that triggers the distinct early ROS and SA signalling. Transcriptomics analysis at 2 h revealed that both emitters evoke largely distinct changes in pak choy, likely stemming from variations in speed and sequence of the early signal transduction, leading to different phenotypic outcomes. Intercropping with sweet basil led to enhanced pak choy biomass, stress resilience and secondary metabolite accumulation, whereas spearmint as companions had a limited impact. Our study captures in real time, the VOC-induced rapid signalling in receiver plants and its ensuing effect on growth. These nanosensor-enabled findings represent an important advance in deciphering how emitter-specific volatile cues are integrated into plant responses, guiding rational selection of beneficial companion plants for improved yield and nutritional profiles in sustainable agriculture.
Why it matches plant phenotyping methods植物内のROSとSAシグナルをリアルタイム可視化する多重化ナノセンサーが研究の中心であり、植物の生理状態・応答を測定する方法として適用されている。
abstractdue to a lack of appropriate non-destructive analytical tools. In this work, we employ multiplexed salicylic acid (SA) and H 2 O 2 nanosensors in Brassica rapa subsp. Chinensis (pak choy) plants to visualize, in real time, reactive oxygen species (ROS) and SA signal transduction
Urban air pollution may alter plant metabolism long before visible damage becomes apparent. Raman spectroscopy was evaluated as a rapid, non-destructive approach to resolve these biochemical adjustments. Mature Quercus ilex L. trees were sampled along a well-defined pollution gradient in Tuscany (Italy), spanning high, intermediate, and low levels of NO₂ and PM₁₀. Leaf Raman spectra revealed coordinated modulation of primary and secondary metabolism. Pigment-related bands (chlorophylls and carotenoids) increased toward the most polluted site, while inducible flavonoid signals showed site-dependent variation consistent with oxidative pressure in superficial tissues. These patterns were consistent with destructive biochemical analyses and chlorophyll fluorescence measurements, which indicated acclimation rather than photoinhibition damage. A composite Raman index showed a close site-level association with NO₂ exposure, suggesting that nitrogen-related urban pollution was the main exposure component linked to the observed metabolic response. Overall, Raman spectroscopy captures the chronic metabolic imprint of urban air pollution in Q. ilex, resolving coordinated pigment reinforcement and defensive activation without sample destruction. This approach provides a rapid and scalable framework for linking atmospheric chemistry to plant functional status in biomonitoring applications.
Why it matches plant phenotyping methods植物の代謝・機能状態を非破壊的に推定するRaman分光法を評価し、スペクトル指標と生化学・蛍光測定の整合性を検証しているため、手法が中心的です。
abstractRaman spectroscopy was evaluated as a rapid, non-destructive approach to resolve these biochemical adjustments.
Agriculture is being revolutionized through the integration of cutting-edge technologies that support efficiency, productivity, and sustainability. Recent trends in transforming traditional agriculture into smart agricultural systems through the application of Artificial Intelligence (AI), IoT, and drone technology are gaining popularity worldwide. In this context, the current study developed an integrated artificial intelligence-based farming system incorporating Internet of Things sensors, drones, deep learning, and web/mobile applications for timely monitoring of crop and aquatic health. Data were collected using IoT sensors and drones equipped with high-resolution cameras to monitor soil and water parameters, including temperature, humidity, and pH, under various climatic conditions. A dataset of 70,000 images was used for system training, validation, and testing with an 80:10:10 split, together with three months of IoT sensor data. Models including YOLOv8, CNN, Faster R-CNN, ResNet50, MobileNet, EfficientNet, DenseNet, LSTM, and Random Forest were used for pest and disease detection, fish classification, fish disease detection, shrimp disease detection, and monitoring of climatic factors. Data pre-processing included denoising, normalization, missing-value handling, and feature extraction. The designed model showed reliable performance across the tasks, with 88.4% accuracy for shrimp detection, 92.1% for pest detection using YOLOv8, and 93.4% accuracy for plant disease detection using the CNN model. Overall performance was recorded at 97% accuracy, with high precision, F1-score, and mAP, and an RMSE of 1.2 for sensor-based prediction and validation. The current findings indicate the potential of using AI, IoT, and drone technologies to detect biotic and abiotic stresses during farming and support a sustainable agricultural system.
Why it matches plant phenotyping methodsAI・IoT・ドローンを統合した作物健康モニタリングシステムを開発し、植物病害検出モデルを訓練・検証しており、植物状態の取得方法が中心的である。
abstractthe current study developed an integrated artificial intelligence-based farming system incorporating Internet of Things sensors, drones, deep learning, and web/mobile applications for timely monitoring of crop and aquatic health
Abstract Agricultural pest and disease monitoring plays a vital role in ensuring crop productivity, reducing pesticide consumption, and promoting sustainable agricultural development. Although deep learning techniques have achieved remarkable success in plant health diagnosis, many existing models remain computationally intensive and are difficult to deploy on resource-constrained edge devices used in practical agricultural environments. To address these challenges, this study proposes a practical lightweight deep learning framework based on an improved ShuffleNetV2 architecture for real-time maize pest and disease recognition under complex field conditions.The proposed model incorporates the Ghost module to reduce redundant feature generation, the Efficient Channel Attention (ECA) mechanism to enhance feature representation, and the HardSwish activation function to improve nonlinear learning capability while maintaining computational efficiency. Extensive experiments were conducted on a maize pest and disease dataset containing multiple disease and pest categories collected under natural field conditions. Experimental results demonstrate that the proposed model achieves superior recognition accuracy while significantly reducing model parameters and computational complexity compared with several mainstream lightweight convolutional neural networks.The results show that the proposed method achieves an accuracy of 93.00%, a recall of 92.76%, and an F1-score of 92.42%, while maintaining extremely low computational cost (0.03 GFLOPs) and model size (1.16 MB). Furthermore, the proposed model was successfully deployed on a Raspberry Pi platform, demonstrating excellent real-time inference capability and low computational resource consumption. The framework is suitable for practical agricultural applications, including intelligent crop monitoring, UAV-assisted field inspection, and mobile diagnostic systems. By enabling rapid and accurate in-field identification of maize pests and diseases, the proposed approach supports timely crop protection decisions, reduces unnecessary pesticide application, and contributes to sustainable agriculture through practical edge-AI deployment.
Why it matches plant phenotyping methodsトウモロコシの病害状態を画像から認識する軽量深層学習法の開発・評価が中心であり、植物病害フェノタイプの取得手法に該当する。
abstractthis study proposes a practical lightweight deep learning framework based on an improved ShuffleNetV2 architecture for real-time maize pest and disease recognition under complex field conditions.
Hyperspectral sensors have emerged as a promising approach in the study of plant diseases. The objective was to distinguish between healthy and inoculated seeds, and also to distinguish between genera of plant-pathogenic fungi in soybean seeds, using hyperspectral sensors combined with machine learning. The experimental design was a fully randomized factorial design with six algorithms (Simple Logistic Regression, Support Vector Machine, Artificial Neural Network, Random Forest, REPTree and J48 decision trees) and four phytopathogens (Sclerotinia sclerotiorum, Macrophomina phaseolina, Rhizoctonia solani, and Colletotrichum sp.) plus the control. Spectral analysis of the seeds was performed using a spectroradiometer (Ocean Optics) consisting of two sensors: NIR and Flame, covering the spectrum from 350 to 2500 nm. It was possible to distinguish between healthy and inoculated seeds, as well as identify the type of phytopathogen, based on each spectral signature. The Simple Logistic Regression and Support Vector Machine algorithms performed best. Hyperspectral sensors combined with machine learning constitute a promising tool for the detection of phytopathogens in seeds, enabling rapid and non-destructive analysis. This promising tool could serve as a complementary alternative to traditional diagnostic methods, which, although accurate, are time-consuming and rely on specialized labor.
Why it matches plant phenotyping methods種子の健全・感染状態を非破壊的に推定するハイパースペクトルセンシングと機械学習が研究の中心であり、感染植物器官の状態を直接測定する方法として扱える。
abstractThe objective was to distinguish between healthy and inoculated seeds, and also to distinguish between genera of plant-pathogenic fungi in soybean seeds, using hyperspectral sensors combined with machine learning.
Key message Yield-Graph enables accurate maize yield prediction from incomplete multi-stage phenotypic and environmental data by modeling higher-order environment-trait interactions, with robust applicability across growth stages, regions, and crop species. Accurate yield prediction before maize harvest is crucial for advancing agricultural management and ensuring food security. Unlike conventional approaches that rely on traits from a single growth stage, this study models multiple traits across different developmental stages, all targeting final yield, thereby uncovering their stage-specific contributions and demonstrating the feasibility of early yield prediction. We introduce Yield-Graph, an innovative framework that evaluates phenotypic data at distinct developmental stages for yield prediction. The method employs a bipartite graph structure to impute missing trait values at each stage and leverages a hypergraph attention mechanism to capture high-order sample relationships. Comprehensive benchmark experiments demonstrate that Yield-Graph matches the top-tier predictive accuracy of exhaustively optimized tree models. Moreover, the framework exhibits strong robustness across growth stages, high adaptability to regional variations, and effective generalization across datasets. These findings highlight the potential of graph-enhanced multi-stage modeling for early-stage yield prediction, offering a scalable solution for precision agriculture and intelligent crop management.
Why it matches plant phenotyping methods作物収量という植物形質を、複数時期の表現型データから推定するグラフニューラルネットワーク手法を開発し、ベンチマーク評価しているため、計算型フェノタイピング手法が中心である。
abstractWe introduce Yield-Graph, an innovative framework that evaluates phenotypic data at distinct developmental stages for yield prediction.
High-throughput phenotyping of lettuce seedlings is highly prone to background confusion because the seedlings are small, have weak textural features, and exhibit spectral reflectance similar to that of the substrate. Traditional single-visual-modality approaches struggle to achieve reliable structural and physiological characterization simultaneously under the repetitive backgrounds and dense arrangements typical of greenhouse tray cultivation. To address these challenges, we establish a multimodal 3D phenotyping framework tailored for controlled agriculture environments, enabling the quantification of structural and physiological characteristics of lettuce seedlings. This framework is based on an unmanned ground vehicle (UGV) platform integrating a RGBD camera and a quad-band multispectral sensor which are rigidly coupled and synchronously triggered. An alignment module based on established feature matching algorithm is introduced to register the misalignment between source multispectral and RGBD images. Subsequently, we design a novel dual-backbone instance segmentation network, MS-SegNet, to enhance segmentation accuracy by hierarchically fusing geometric information with multispectral features. A robust 3D metric pose estimation pipeline, incorporating standard SfM initialization, scale recovery, and generalized ICP refinement, is constructed to generate 3D point clouds with spectral attributes and semantic labels. Finally, key structural and physiological phenotype parameters of each seedling are calculated based on the 3D semantic multispectral point clouds. Experiments demonstrate that MS-SegNet achieves significant advantages in instance segmentation of lettuce seedlings with mAP@50:95 = 0.854. The metric 3D pose estimation pipeline exhibits reliable performance under complex controlled conditions. The quality of the 3D reconstructions is indirectly validated through downstream structural trait extraction. The estimated seedling height and crown width show high correlation with manual measurements, achieving R 2 values of 0.8379 and 0.918, and RMSE values of 10.94 mm and 11.56 mm, respectively. Overall, by systematically integrating these adapted components with the novel segmentation architecture, this framework achieves stable performance improvements in 3D reconstruction, instance segmentation, and phenotypic analysis under greenhouse conditions. It provides a scalable, integrated technical solution for non-destructive, high-throughput phenotyping of crop seedlings in controlled environments.
Why it matches plant phenotyping methodsRGBD・マルチスペクトル・UGVを統合した3Dフェノタイピング基盤を開発し、分割・再構成・構造／生理形質抽出を検証しており、フェノタイピング手法が研究の中心である。
abstractwe establish a multimodal 3D phenotyping framework tailored for controlled agriculture environments, enabling the quantification of structural and physiological characteristics of lettuce seedlings.
Accurate plant disease detection remains challenging when using single-modality data, which fails to capture comprehensive disease-related features. However, many existing studies rely on pixel-level classification or prior plant segmentation and lack explicit modeling of cross-modal interactions, limiting their ability to distinguish between healthy and diseased plants. This study presents a spatial–spectral fusion deep learning framework (S2-PDD) that fuses uncrewed aerial vehicles (UAV)-based RGB imagery and hyperspectral-derived feature representations for plant-level detection of potato diseases (blackleg and Potato virus Y (PVY)), employing early fusion (modalities combined at the input stage) and middle fusion (features integrated at intermediate stages within the model backbone) strategies. The multimodal fusion models were compared against single-modal models and an existing S2ADet model. Model performance, assessed through five-fold cross-validation, demonstrated that multimodal models integrating RGB and vegetation index features achieved the highest mAPs of 86.65 ± 1.71 (%; E-RV model) and 85.74 ± 1.96 (M-RV), respectively. These mAPs were higher than those of all single-modal models, including the RGB-only (83.21 ± 1.46) and hyperspectral-only models (PCA features: 79.71 ± 1.45; vegetation index features: 85.31 ± 2.36). They also exceeded mAPs of multimodal models combining RGB with PCA features (early fusion: 83.00 ± 2.81; middle fusion: 83.11 ± 2.46; S2ADet: 84.04 ± 2.73), regardless of the fusion strategy. The superior performance highlights that vegetation index features provide strong class separability compared to other hyperspectral representations. The proposed models achieved strong plant-level detection performance, with AP of 78.65 ± 4.14 (E-RV) and 77.40 ± 3.46 (M-RV) for blackleg disease, as well as 84.82 ± 3.59 (E-RV) and 83.28 ± 3.86 (M-RV) for PVY. These results demonstrate the potential of UAV-based multimodal sensing for disease monitoring in cropping systems. A potato plant disease detection dataset was constructed and made publicly available, containing paired RGB and hyperspectral image tiles with bounding box annotations. The code is available at https://github.com/Tim-Agro/S2-PDD.
Why it matches plant phenotyping methodsUAV RGB・ハイパースペクトル画像からジャガイモ個体の病害状態を推定する融合モデルを開発・比較検証し、公開データセットも構築しており、病害表現型の取得・抽出手法が中心である。
abstractThis study presents a spatial–spectral fusion deep learning framework (S2-PDD) that fuses uncrewed aerial vehicles (UAV)-based RGB imagery and hyperspectral-derived feature representations for plant-level detection of potato diseases (blackleg and Potato virus Y (PVY))
Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · Europe PMC · checked 14 Sept 2026
Crop phenotyping is crucial for advancing plant breeding, yet remains a significant challenge. Manual approaches are labor-intensive and do not scale to the analysis of large datasets, while computational methods like Vision-Language Models (VLMs) lack the adaptability for fine-scale spatial reasoning and diverse phenotyping scenarios. To bridge the gaps, we present iPheno, a fully open-source, domain-specialized multimodal VLM for fine-scale crop phenotyping. A key innovation of iPheno is its dual-aware architecture. First, a spatial-aware feature extractor samples mask regions into local K-Nearest Neighbors (KNN) graphs and enables fine-scale analysis of arbitrary-shaped regions; second, a task-aware Mixture-of-Experts (MoE) routing mechanism activates specialized modules for each phenotyping task. To train iPheno and achieve rigorous benchmarking, we constructed iPheno-120K, a large-scale high-precision dataset designed for multiple phenotyping tasks. Evaluations on iPheno-120k test set and other publicly available datasets showed that iPheno outperformed all fine-tuned baselines, by improving F1-score by 17.1% (LLaVA-1.6-13B) to 28.9% (MiniCPM-o-9B), while achieving the highest inference speed and memory efficiency. A web server (https://ipheno.ai4bread.com), a mobile application (www.ipheno.cn), and a stand-alone PC client (https://github.com/2997029323/iPheno-PC-Client) are available for iPheno.
Why it matches plant phenotyping methods植物表現型を対象とするVLMの開発、マルチタスク評価、専用データセット構築が研究の中心であり、明確な方法論的貢献がある。
abstractwe present iPheno, a fully open-source, domain-specialized multimodal VLM for fine-scale crop phenotyping.
Rice panicle blast detection is an important task in plant disease phenotyping. Field-based detection remains challenging because infected spike regions are often small, sparse, elongated, and affected by overlapping panicles, complex backgrounds, and variable illumination. In this study, we propose RPB-YOLO11, a lightweight YOLO11-based detector designed for rice panicle blast detection. The model uses a Lightweight Ghost Backbone (LGB) to reduce redundant computation. It uses Anisotropic Axial Stripe Attention (A2SA) to represent elongated panicle structures. It also uses Focal Multi-Scale Attention (FMSA) for multi-scale feature refinement and Adaptive Geometric Shape IoU (AGS-IoU) for geometry-aware localization. The model was trained and evaluated on a rice panicle image dataset containing 1,055 training images, 69 validation images, and 169 test images. On the test set, RPB-YOLO11 achieved 76.09% mAP50, 45.44% mAP50-95, 73.98% precision, and 72.75% recall with 6.21 GFLOPs. Compared with the YOLO11n baseline, it improved mAP50, mAP50-95, precision, and recall by 2.73, 2.12, 1.64, and 2.11 percentage points, respectively. An Android-oriented inference application supports local image inference, detection visualization, class counting, and diseased-panicle incidence estimation. These results suggest that RPB-YOLO11 provides a practical approach for image-based rice panicle blast survey.
Why it matches plant phenotyping methodsイネ穂いもちの画像検出モデルを開発・比較検証し、罹病穂率を推定する実用アプリまで構築しており、植物病害状態の画像ベース表現型取得が中心である。
abstractIn this study, we propose RPB-YOLO11, a lightweight YOLO11-based detector designed for rice panicle blast detection.
Reproduction assets foundThe paper links a public Hugging Face dataset used to establish the rice panicle blast detection dataset and a public GitHub release (data availability statement) containing the study's datasets/models.Dataset · publicsites, cultivars, growth stages, imaging conditions, and disease severities are still needed to evaluate generalization more fully.
Statements
Data availability statement
The datasets presented in this study can be found in online repositories. The names of the repository/repositories and accession number(s) can be found below: https://github.com/XuzheYang2Doc/RPB-YOLO11/releases/tag/rpb-yolo11 .
Author contributions
XY: Data curation, Formal analysis, Investigation, Methodology, Software, Validation, Visualization, Writing – original draft, Writing – review & editing. XZ: Conceptualization, Methodology, Visualization, Writing – original draft, Writing – review & editing. CX: Formal analysisOpen asset ↗XuzheYang2Doc/RPB-YOLO11 · rpb-yolo11lines:639-658Plant phenotyping relevance match · UnverifiedCrossref · checked 14 Sept 2026
Published1 Sept 2026Computers and Electronics in Agriculture
Abstract has not been obtained from indexed metadata or an accessible article page.
Why it matches plant phenotyping methodsレタスのシュート段階を対象とした非破壊フェノタイピング手法と、強化セグメンテーションを含む画像解析モデルの開発が題名で明示されており、表現型取得・抽出が中心です。
titleMoeBi-ViT: Non-destructive shoot-stage phenotyping of lettuce in plant factory via dual-branch mixture-of-experts network and enhanced segmentation
Accurate and efficient monitoring of tea plant growth parameters via remote sensing is essential for precision plantation management. However, spectral indices relying solely on reflectance often exhibit limited sensitivity in capturing complex tea canopy characteristics. This study developed a data-driven framework integrating spectral reflectance, frequency-domain harmonic components, and spatial texture features to construct tri-feature fusion indices (TFIs) and establish machine learning and deep learning models for tea growth monitoring. Ten-band multispectral imagery was acquired using a UAV alongside synchronous field measurements of leaf and plant biomass and nitrogen accumulation. TFIs were constructed through exhaustive feature combinations and optimized via a data-driven search strategy. Subsequently, random forest (RF), multilayer perceptron (MLP), convolutional neural network (CNN), and transformer models were evaluated using a leave-one-site-out cross-validation (LOSO-CV) strategy. The selected TFIs showed strong associations with tea growth parameters within the investigated dataset, with R2 values up to 0.63 and 0.62 for leaf dry matter and leaf nitrogen accumulation, respectively. Models incorporating selected TFIs achieved cross-validated R2 values of 0.56 for leaf dry matter (MLP), 0.59 for plant dry matter (MLP), 0.73 for leaf nitrogen accumulation (MLP), and 0.68 for plant nitrogen accumulation (CNN). These models exhibited competitive predictive performance comparable to RF, although no statistically significant differences in mean absolute error were observed under site-held-out evaluation. Furthermore, model-derived spatial maps provided insights into fine-scale spatial heterogeneity and potential interannual variations in tea growth parameters across representative plantations from 2024 to 2025. Overall, this study provides a UAV-based framework for tea growth parameter estimation by integrating multi-domain information without requiring additional environmental observations.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像から茶植物の乾物量・窒素蓄積を推定する特徴量融合および機械学習・深層学習フレームワークを開発し、サイト外交差検証で評価しており、植物形質の取得・推定手法が中心である。
abstractThis study developed a data-driven framework integrating spectral reflectance, frequency-domain harmonic components, and spatial texture features to construct tri-feature fusion indices (TFIs) and establish machine learning and deep learning models for tea growth monitoring.
Fruit quality is a critical determinant of economic returns in pear production, and maintaining an appropriate fruit load (FL) is essential for achieving high yield and quality. As a direct indicator of canopy photosynthetic capacity and assimilate supply, leaf number constitutes the key biological basis of reasonable FL determination under the leaf-to-fruit ratio concept. However, accurate and efficient estimation of leaf number in mature pear trees remains technically challenging, limiting its practical use in precision FL regulation. Here, we propose a data-driven framework for leaf number and reasonable FL estimation by integrating 3D point cloud-derived canopy structure with machine learning. A pipeline for extracting 3D architectural traits was developed and implemented in the software tool FTPCT, enabling rapid and standardized trait acquisition. Through correlation analysis, multicollinearity diagnosis, and variance inflation factor screening, five key traits strongly associated with leaf number were identified and incorporated into five machine learning models optimized using Bayesian optimization. Among them, the optimized random forest regression model achieved the highest and most stable performance, with R 2 of 0.85, RMSE of 239.74, and MAE of 149.26 for test dataset. SHAP analysis identified tree crown volume as the dominant contributor to leaf number estimation. Field validation demonstrated that FL regulation guided by the proposed framework significantly improved fruit weight and size without reducing yield compared with conventional practices. Notably, the proposed approach avoids explicit leaf-level reconstruction and relies on less canopy-scale traits, substantially reducing data requirements and computational cost, and thereby offering strong potential for rapid, field-deployable FL regulation in large-scale orchards.
Why it matches plant phenotyping methods3D点群から樹冠構造形質を抽出し、葉数と適正着果量を推定する手法およびソフトウェアを開発・検証しており、植物表現型取得が中心である。
abstractA pipeline for extracting 3D architectural traits was developed and implemented in the software tool FTPCT, enabling rapid and standardized trait acquisition.
Reproduction assets foundThe paper's phenotyping analysis assets are the authors' publicly released LeafNumPred source code and trained models, and the FTPCT software for 3D trait extraction from pear tree point clouds. Phenotype/point-cloud datasets are only available on request.Code · public. Supplementary data
The following is the Supplementary data to this article:
Multimedia component 1
mmc1.docx (1.6MB, docx)
Data availability
Data will be made available on request. Anyone who wants to obtain other public data can contact us at taost@njau.edu.cn. The source codes and models have been made publicly available at https://github.com/Zhang-Fanhang/LeafNumPred, and the FTPCT software has been released at https://github.com/Zhang-Fanhang/FTPCT/tree/Installation-package.
References
1.Tao S., Khanizadeh S., Zhang H., Zhang S. Anatomy, ultrastructure and lignin distribution of stone cells in two Pyrus species. Plant Sci. 2009;176:413–419. [Google Scholar]
2.Zhang F., Wang Q., Yuan K.Open asset ↗Zhang-Fanhang/LeafNumPredhtml-lines:284-315Code · publical variations [34,35]. The method for calculating these traits are shown in the Supplementary information 1.
2.5. Software implementation for 3D trait extraction (FTPCT)
To facilitate efficient and standardized extraction of canopy structural traits from point cloud data, we used a standalone software tool, FTPCT (available at: https://github.com/Zhang-Fanhang/FTPCT/tree/Installation-package), which integrates the trait extraction procedures applied in this study. The software provides a graphical user interface, enabling users to process tree-level point cloud data and extract key 3D structural traits without requiring advanced programming skills.
FTPCT implements a series of predefined proOpen asset ↗Zhang-Fanhang/FTPCThtml-lines:138-149Plant phenotyping relevance match · UnverifiedOpenAlex · Europe PMC · checked 14 Sept 2026
Plant Phenomics studies the phenotypic dynamics that form plant phenotypes by systematically measuring traits using phenotyping methods from the quantum to the ecosystem levels. It has emerged as an interdisciplinary field advancing sensing, computation, and plant biology. However, Plant Phenomics has lacked a unifying framework that integrates its community's core concepts from the formal and life sciences. Central to this framework is the definition of the phenome as a set of phenes that govern phenotypic dynamics across all spatial and temporal scales of biological and ecological organization and in interaction with the environment. This paradigm moves beyond gene-centric views and recognizes the equal importance of all spatial and temporal scales in forming plant phenotypes, advancing Plant Phenomics as a data-driven discipline and its emerging profession, the plant phenomicist.
Why it matches plant phenotyping methods植物フェノミクスの概念・枠組みを扱うレビューであり、植物形質の系統的測定とフェノタイピング手法を主題としているため、方法論レビューとして適格。
abstractPlant Phenomics studies the phenotypic dynamics that form plant phenotypes by systematically measuring traits using phenotyping methods from the quantum to the ecosystem levels.
UAV-based multi-view reconstruction is an important approach for high-precision, non-destructive 3D crop phenotyping. However, in greenhouse environments, UAV image acquisition is often restricted to sparse viewpoints because of UAV-induced airflow disturbances and the structural complexity of the greenhouse, which severely hinders accurate 3D phenotyping. To address this challenge, this study develops a task-driven phenotyping framework for constrained UAV viewpoints in greenhouse environments, integrating a vision-triggered flight planning strategy with an improved sparse-view 3DGS pipeline, termed SparseBerry-3DGS, for multi-view image acquisition and 3D phenotyping of greenhouse strawberries in GNSS-denied environments. Specifically, 3D Gaussian Splatting (3DGS) is improved by incorporating flow-guided initialization, depth supervision, and an adaptive pruning strategy, which effectively alleviate geometric collapse and floating artifacts under sparse-view conditions. Furthermore, sequential semantic masks generated by SAM2 are utilized to guide the segmentation of strawberry point clouds, thereby reducing background interference and segmentation errors. Experimental results show that the vision-triggered flight strategy enables stable capture of 16 surrounding images for each target fruit. Under sparse-view conditions, SparseBerry-3DGS improves reconstruction stability, with the average peak signal-to-noise ratio (PSNR) reaching 18.25 dB, corresponding to an 18% improvement. The SAM2-based segmentation module achieves high accuracy, with the mean intersection over union (mIoU) above 0.95. Geometric evaluation based on strawberry longitudinal diameter yielded an of 0.88, supporting the accuracy of fruit-scale geometric reconstruction. For weight estimation, five-fold cross-validation yielded an of 0.90 and an RMSE of 3.62 g, showing better predictive performance than models based on 2D projected area and standard 3DGS point clouds. This study provides a new approach for high-throughput, non-invasive digital crop phenotyping in greenhouse horticulture.
Why it matches plant phenotyping methods温室イチゴの3D形状再構成と重量推定を目的に、制約視点UAV撮影、SparseBerry-3DGS再構成、点群セグメンテーションを統合した表現型取得手法を開発・検証しており、方法が研究の中心である。
abstractthis study develops a task-driven phenotyping framework for constrained UAV viewpoints in greenhouse environments
Plant counting functions as a central role in the quantification system of plant phenotyping. Over the years, the field has evolved through successive technological paradigms, and its modern form has been strongly influenced by advances in visual counting from computer vision. In this review, we synthesize the historical origins of plant counting, assess its current fragmented landscape, and outline a roadmap toward standardized, universal plant counting systems. We propose a coherent conceptual framework— the four-level hierarchy of plant counting , which characterizes the environment, platform, sensor, and counting entity in biological organization —grounded in the need of high-throughput plant phenotyping. This framework aims to guide the development of plant counting systems that are not only accurate on individual dataset, but also reusable, comparable, and trustworthy across modern plant phenotyping scenarios. We argue that existing plant counting approaches are constrained by species-specific designs, sensor-dependent assumptions, and local, region-bound assessments. We hope this review can serve as a reference for building cross-species, cross-modal, and cross-scale visual plant counting systems.
Why it matches plant phenotyping methods植物フェノタイピングにおける画像ベースの植物個体数計測を主題とし、手法の歴史、現状評価、標準化・汎用化の枠組みと開発指針を扱うレビューであるため。
abstractPlant counting functions as a central role in the quantification system of plant phenotyping.
Problem: Agriculture plays a pivotal role in the Indian economy, where crop production quality and quantity directly impact the livelihoods of millions. Climate variability, emerging plant diseases, and improper pesticide application contribute significantly to agricultural losses. Early and accurate disease detection is crucial for mitigating crop damage and ensuring food security. Methodology: This study presents a novel deep learning framework based on EfficientNet architecture, enhanced with Progressive Fine-Tuning Strategy for automated plant disease detection. The proposed methodology was evaluated on two benchmark datasets: the Plant Village dataset comprising 20,639 images of tomato, potato, and bell pepper with 15 disease varieties; and a drone-captured rice plant dataset containing 4432 samples from public repositories. The model’s performance was assessed using multiple metrics, including classification accuracy, precision, recall, and F1-score. To strengthen the validation of high accuracy results, additional statistical analyses like class imbalance ratio, Entropy, Chi-Square test, convergence curve, ANOVA test, Tukey’s post hoc HSD test, confidence interval, Cohen’s Kappa result, fold-wise dispersion analysis, mean, std deviation are included in the manuscript. Result: Experimental results demonstrate that the fine-tuned EfficientNetV2-B1 architecture achieved exceptional performance with 99.7% classification accuracy on the PlantVillage dataset and 99.03% accuracy on the drone-based rice disease dataset, significantly outperforming existing state-of-the-art transfer learning models. Model explainability techniques further validated the reliability and interpretability of the predictions, confirming the model’s focus on disease-relevant features.
Why it matches plant phenotyping methods植物画像から病害状態を推定する深層学習手法を開発し、複数データセットで性能検証しており、植物フェノタイピング手法が中心である。
abstractThis study presents a novel deep learning framework based on EfficientNet architecture, enhanced with Progressive Fine-Tuning Strategy for automated plant disease detection.
Automated plant disease classification from leaf images demands models that jointly achieve high accuracy and efficient training convergence. Standard deep learning approaches process images through a single feature pathway, limiting their ability to capture diverse visual manifestations such as color changes, texture patterns, and spatial distributions. This paper introduces DMCNNA-FBVL, a framework integrating two complementary innovations: (1) a Deep Multi-Component Neural Network Architecture (DMCNNA) employing three specialized pathways processing color-space statistics, texture descriptors, and raw image features before fusing them through SoftMax-weighted aggregation; and (2) Feedback-Based Validation Learning (FBVL), a training strategy that periodically blends validation-set gradients into weight updates to accelerate convergence. Experiments on the New Plant Diseases Dataset (87,000 images, 38 classes) show that DMCNNA-FBVL achieves 98.7% accuracy, 98.8% precision, 98.6% recall, and 98.7% F1-score, outperforming ResNet-50 by 3.2 percentage points ( 𝑝 < 0 . 0 0 1 ). The primary reported metrics are computed exclusively on an independent 10% hold-out test set, whereas the separate 10% validation partition is used during training for FBVL gradient blending and does not contribute to final test evaluation. Five-fold cross-validation confirms stability (98.7% ± 0.15%). Ablation experiments confirm additive gains, while FBVL reduces wall-clock training time by 15% through faster convergence.
Why it matches plant phenotyping methods葉画像から植物病害を分類するニューラルネットワークと学習戦略の開発・検証が研究の中心であり、植物の病害状態を直接推定している。
abstractAutomated plant disease classification from leaf images demands models that jointly achieve high accuracy and efficient training convergence.
Reproduction assets foundThe paper's plant disease classification experiments use the New Plant Diseases Dataset, which the authors state is publicly available on Kaggle. The authors' code and trained models are only promised 'upon acceptance' (no public URL), so they do not qualify as public assets.Dataset · publicral
monitoring systems.
Declaration of competing interest
The authors declare that they have no known competing financial interests or personal relationships that could have
appeared to influence the work reported in this paper.
Data availability
The New Plant Diseases Dataset used in this study is publicly available on Kaggle (https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset). Code and trained models will be made available upon
acceptance.
Funding
This research did not receive any specific grant from funding agencies in the public, commercial, or not-for-profit
sectors.
Acknowledgments
[Removed for double-blind review.]
CRediT authorship contribution statement
[Removed fOpen asset ↗Kaggle · new-plant-diseases-datasetpdf-raw-page:19 lines:1-59Plant phenotyping relevance match · UnverifiedEurope PMC · checked 14 Sept 2026
Published1 Sept 2026Journal of the Royal Society, Interface
LiDAR / point cloudFlowerArchitecture / morphology / geometry
The mechanical dynamics of poricidal stamens play a crucial role in buzz pollination, but they have only been studied in a few species showing comparatively less curvature. This paper presents an integrated experimental-computational approach to characterize the dynamic behaviour of the morphologically more complex stamens of Medinilla magnifica. An experimental set-up employing a custom-built shaker and a laser triangulation sensor is developed to measure the stamen motion with high spatial and temporal resolution. The resulting displacement transmissibility reveals three distinct resonances, with the second one falling within the reported frequency range of pollination buzzes. Finite-element and multi-body models are developed and validated against experimental results. The models further reveal how the stamen morphology gives rise to its complex dynamic behaviour. The developed method enables precise parametric modelling of stamens and provides new insight into the mechanical basis of pollen release, thereby offering a framework for studying buzz pollination dynamics across plant taxa.
Why it matches plant phenotyping methods植物の雄しべ運動をレーザー計測し、有限要素・マルチボディモデルで検証する実験計算手法が研究の中心であるため。
abstractAn experimental set-up employing a custom-built shaker and a laser triangulation sensor is developed to measure the stamen motion with high spatial and temporal resolution.
Abstract In Bangladesh, the potato (Solanum tuberosum L.) stands as an indispensable food and cash crop, deeply intertwined with national food security, rural livelihoods, and the broader agricultural economy. However, foliar diseases such as early blight and late blight frequently precipitate substantial yield losses and quality degradation when not identified and mitigated during the nascent stages of infection. Contemporary diagnostic paradigms remain predominantly manual and visual, relying heavily on agricultural professionals, which is often inefficient and inaccessible for remote farmers. While deep learning has demonstrated remarkable efficacy in automated plant disease recognition, existing methodologies frequently lack interpretability, disease severity quantification, and real-world field applicability. This paper introduces a comprehensive, interpretable deep learning-based framework utilizing EfficientNetV2-B0 for classifying potato leaf images into healthy, early blight, and late blight categories. By integrating Gradient-Weighted Class Activation Mapping (Grad-CAM), the model achieves high transparency, highlighting critical prediction regions. Furthermore, a severity assessment module estimates infection percentages, providing actionable treatment recommendations, ultimately enhancing agricultural decision-making.
Why it matches plant phenotyping methodsジャガイモ葉の画像から病害の種類と感染割合（重症度）を推定する深層学習手法が研究の中心であり、植物病害状態の表現型取得・定量化に該当する。
abstractThis paper introduces a comprehensive, interpretable deep learning-based framework utilizing EfficientNetV2-B0 for classifying potato leaf images into healthy, early blight, and late blight categories.
The automation and standardization of hyperspectral imaging, particularly at high spatial resolution, are essential for advancing plant phenomics and supporting diverse plant science research. We developed HyperBird, a hyperspectral microscopic imaging robot, to automate the acquisition of up to 351 leaf-disc samples in a single tray within approximately 2.4 h and thereby support scalable plant experiments. System calibration established a spatial resolution of 24.3 μ m (full width at half maximum; FWHM), a spectral resolution of 1.78 nm (FWHM), and a depth of field of 4.53 mm, producing hyperspectral data cubes of 2195 × 2000 × 950 pixels across the 400–1000 nm spectral range. System-level and biological-sample consistency assessments confirmed stable spectral measurements during extended scanning sessions and across independently prepared trays. Thermal evaluation confirmed that the 150 W illumination design introduced minimal sample heating during scanning. HyperBird was first evaluated using grape downy and powdery mildews, where no consistent measurable effect of repeated imaging on pathosystem development was detected under the tested experimental conditions. Subsequently, HyperBird was used to characterize spatiotemporal spectral progression in grapevine leaves inoculated with Plasmopara viticola . An automated regional spectral tracing pipeline was developed to isolate spectra from retrospectively traced regions and compare them with whole-leaf averaged spectra across 0–9 days post-inoculation (DPI). Categorical mixed-effects modeling showed that these spatially resolved regional spectra exhibited significant disease-associated spectral change by 5 DPI, with a sharp transition at 6 DPI, whereas whole-leaf spectra showed delayed and weaker disease-aligned changes beginning at 7 DPI. These results demonstrate that HyperBird enables high-throughput, spatially resolved hyperspectral imaging for quantifying localized plant disease progression and provides a scalable platform for studying spectral biology across plant phenotyping applications.
Why it matches plant phenotyping methodsHyperBirdの高スループット・ハイパースペクトル画像取得ロボットを開発し、校正、再現性、加熱影響、病害進展の定量性能を検証しており、植物フェノタイピング手法が中心である。
abstractWe developed HyperBird, a hyperspectral microscopic imaging robot, to automate the acquisition of up to 351 leaf-disc samples in a single tray within approximately 2.4 h and thereby support scalable plant experiments.
Reproduction assets foundThe paper's Data Availability statement points to a public GitHub repository containing the authors' code and processed data supporting the phenotyping analyses; raw hyperspectral image data are request-only.Code · publicData Availability
857
The code and processed data supporting the findings of this study are available in the GitHub
858
repository at https://github.com/jy773Cornell/HyperBird-Robot. Raw hyperspectral image
859
data are available from the corresponding author upon reasonable request due to file size and storage
860
constraints.
861
Supplementary Materials
862
Supplementary materials accompany this article as a separate document (supplementary.pdf).
863
Supplementary Figure S1. Representative GSAM-based segOpen asset ↗HyperBird-Robotpdf-raw-page:39 lines:1-75Plant phenotyping relevance match · UnverifiedCrossref · checked 14 Sept 2026
Published1 Sept 2026Computers and Electronics in Agriculture
Aboveground biomass density (AGBD) is a key indicator in agricultural systems, directly reflecting crop carbon storage potential and yield levels. The World Food Studies (WOFOST) model is widely used for crop growth simulation due to its process-based interpretability. However, its application is limited by complex calibration demands and struggles with spatial heterogeneity. To address these limitations, this paper proposes an assimilation system that integrates Synthetic Aperture Radar (SAR) data into a modified WOFOST model, which requires simple calibration. WOFOST is run in potential production mode, which assumes ideal conditions to reduce input data requirements. Before assimilation, phenology-related temperature sums are aligned with phenology and meteorological data to match local growth stages. Two quantities are then estimated and updated in the model through data assimilation by minimizing the difference between SAR-derived and simulated AGBD. These quantities are the proposed yield reduction factor, which represents the proportional decrease in potential CO 2 assimilation under stresses, and the initial total dry weight at sowing. Validation experiments were conducted using multi-year cotton datasets from two farms in Georgia, USA, differing in whether irrigation was applied. Compared to WOFOST simulations and evaluated against in situ AGBD measurements, the assimilation results improve agreement and reduce error (approximately 43% RMSE reduction at the rainfed site and 15% at the irrigated site). It also delivers spatial maps of biomass, together with model-derived yield and harvest-index diagnostics, and remains operational under frequent cloud cover where optical observations are sparse. This SAR-based assimilation strategy reduces calibration demands, providing a novel and practical pathway to extend WOFOST applications to diverse agricultural scenarios.
Why it matches plant phenotyping methodsSARデータを作物成長モデルに同化して綿の地上部バイオマスを推定する手法を開発し、複数年・複数圃場データで検証しているため、植物形質取得が中心である。
abstractthis paper proposes an assimilation system that integrates Synthetic Aperture Radar (SAR) data into a modified WOFOST model
Global trait axes reveal overarching dimensions of plant functional variation. However, how these dimensions are spatially organized within and across forest types remains unclear. We combined drone-based full-range imaging spectroscopy with crown-level measurements of 16 physiological, morphological and biochemical traits across temperate, subtropical and tropical forests in China to enable spatially-explicit trait mapping. Through site-training scenario, leaf-to-canopy scaling and spectral-domain modelling tests, we find that reliable canopy trait retrieval depends not only on trait and spectral coverage, but also on preserving trait-spectral relationships across sites and scales. Spectral predictions recovered observed multivariate covariation, summarizing crown variation into a leaf-economics dimension and two additional biochemical dimensions related to hydro-thermal regulation and defence/metabolism. Mapping these dimensions revealed distinct community-level trait organization alongside substantial species- and crown-level variation within forests. These findings link remotely sensed trait retrieval to environmental filtering and plant functional differentiation, providing a scalable framework for monitoring forest functional diversity.
Why it matches plant phenotyping methodsドローン分光画像と冠レベル形質測定を用いた植物形質の空間マッピング手法が中心で、スケーリングおよびスペクトルモデルの検証も行っている。
abstractWe combined drone-based full-range imaging spectroscopy with crown-level measurements of 16 physiological, morphological and biochemical traits across temperate, subtropical and tropical forests in China to enable spatially-explicit trait mapping.
Southern corn leaf blight (SCLB) is caused by the fungal pathogen Bipolaris maydis (syn. Cochliobolus heterostrophus Drechsler) and is a common disease of fall crops of sweet corn. Phenotyping for SCLB resistance is performed through visual scoring, which is subjective and may limit genetic gain for this quantitative trait. As an alternative, we integrated computer vision (CV)-based phenotyping, genome-wide association studies (GWASs), and predictive breeding approaches to dissect the genetic basis of SCLB resistance. We utilized a sweet corn diversity panel with 693 genotypes, for which whole-genome resequencing produced a high-density single-nucleotide polymorphism (SNP) dataset. Broad-sense heritability for visual scoring ranged from 0.44 to 0.73, while CV-based phenotyping produced estimates ranging from 0.56 to 0.73 in multi-environment resistance trials conducted across 5 years and three locations. We performed GWAS using 16,755,210 SNPs and identified 41 associated SNPs. Genomic selection (GS) models on visual scoring phenotypes achieved moderate prediction accuracies under cross-validation of untested genotypes across characterized environments (0.22-0.47) and high prediction accuracies when predicting tested genotypes in uncharacterized environments (0.49-0.68). Using CV-based phenotypes for GS, we observed prediction accuracies of 0.45-0.47 under the untested genotypes in the characterized environments cross-validation scheme and 0.59-0.62 under the tested genotypes in the uncharacterized environments scheme. GS demonstrated reliability for ranking the individuals across a gradient of environments. These findings identify candidate loci and predictive breeding strategies to accelerate the development of resistant sweet corn cultivars.
Why it matches plant phenotyping methodsCVベースの病害抵抗性表現型測定を視覚評定と比較し、多環境・多年次試験で妥当性を評価しており、フェノタイピング手法が研究の中心である。
abstractPhenotyping for SCLB resistance is performed through visual scoring, which is subjective and may limit genetic gain for this quantitative trait.
Reproduction assets foundThe authors state that all datasets (phenotype data) and analysis code (CV phenotyping script, customized GAPIT script) are publicly available in their GitHub repository, which is listed in allowed_urls.Code · publiche images taken for each plot were saved in JPG format and analyzed using a CV method. Here, we refer to the CV method as a custom Python script written using the OpenCV library version 4.5.0, a set of tools for CV (Bradski, 2000 ). The Python script used for leaf CV image analysis is available in our public GitHub repository ( https://github.com/Resende‐Lab/SCLB‐Disease ).
FIGURE 1
Leaf imaging set up with QR‐coded plot IDs (bottom right) and color checker for computer vision phenotyping of southern corn leaf blight disease severity in sweet corn.
In the CT19 environment, a black cloth attached to a wooden board was used as the background. A wooden frame was used to clamp the leaves down toOpen asset ↗Resende‐Lab/SCLB‐Diseaselines:199-209Dataset · publicBLUP and BayesB model implemented in BGLR.
ACKNOWLEDGMENTS
This work was supported by the National Institute of Food and Agriculture USDA‐NIFA2018‐51181‐28419, USDA‐NIFA2019–05410, and USDA‐NIFA 2022–51181‐38333.
DATA AVAILABILITY STATEMENT
All the datasets and codes used in this study are available in the following repository: https://github.com/Resende‐Lab/SCLB‐Disease
REFERENCES
Amadeu , R. R.
,
Cellon , C.
,
Olmstead , J. W.
,
Garcia , A. A. F.
,
Resende , M. F. R.
, &
Muñoz , P. R.
( 2016 ).Open asset ↗Resende‐Lab/SCLB‐Diseaselines:566-596Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · checked 14 Sept 2026
Abstract Grapevine leaves have dorsiventral anatomy with distinct adaxial (upper) and abaxial (lower) surfaces. Although morphological descriptor lists and ampelographic literature provide information on both the upper and lower side characteristics, in practice, the color traits of the upper side have become the focus of scientific publications. This study introduces the practical application of the recently developed LeafLaminaMap software and the use of trichromatic color indices in grapevine characterization. We aimed to compare colorimetric information on the adaxial and abaxial leaf surfaces as well as to explore the potential of machine learning models in classification. Five statistical descriptors (mean, standard deviation, contrast, energy, and entropy) were calculated for 25 RGB-based color indices on both leaf surfaces of 120 samples collected from four grapevine cultivars (‘Chardonnay’, ‘Pinot noir’, ‘Sauvignon blanc’, and ‘Syrah’). Data was subjected to multivariate statistical analysis and machine learning classifiers. Results showed that the abaxial leaf surface had stronger cultivar-specific color signatures, supporting its suitability for cultivar discrimination. These findings suggest that RGB-based analysis of both adaxial and abaxial leaf surfaces has potential for grapevine cultivar discrimination, offering a new perspective for cost-efficient plant phenotyping.
Why it matches plant phenotyping methodsRGB画像解析とLeafLaminaMap、色指数、機械学習を用いた葉面形質抽出・品種識別が研究の中心であり、植物フェノタイピング手法の実質的応用に該当する。
abstractThis study introduces the practical application of the recently developed LeafLaminaMap software and the use of trichromatic color indices in grapevine characterization.
Background Understanding the structure of plant seeds cultivated for human consumption and food manufacturing is vital to provide sustainable products as well as to investigate early growth stages. This includes structural variation between different plant species, varieties and cultivars depending on genetic setup, as well as structural modifications upon germination, aging and storing or seed treatment during processing. For plant seeds as multi-component biological materials, structural characterization must extend across multiple length scales, from molecular organization to cellular architecture. Results We apply scanning Small- and Wide-Angle X-ray Scattering (SWAXS) and X-ray Fluorescence (XRF) on yellow pea seeds to combine local structural information on the molecular scale with imaging of cellular structures on the micrometer scale, enabling a comprehensive analysis of hierarchical organization. To identify and characterize heterogeneous regions within the pea seeds, we implement a fitting-free, data-driven segmentation and analysis workflow based on machine learning tools. This approach allows for classification of structurally distinct domains and enables quantitative comparison across samples without relying on predefined models. Furthermore, we incorporate multi-modal analysis by combining structural imaging with complementary elemental information obtained from XRF. The integration of compositional and structural data provides deeper insight into structure-composition relationships. Conclusions This multi-scale, multi-modal approach opens new possibilities for investigating hierarchical structures and their development under diverse conditions and enables systematic comparison between different species or seeds at different developmental stages or exposed to different processing steps. The approach is broadly applicable to various kinds of samples and other hierarchically organized biological materials, which makes it a valuable technique for plant science as well as plant-based food science.
Why it matches plant phenotyping methods種子の構造・細胞領域をX線散乱／蛍光イメージングと機械学習ベースのセグメンテーションで定量解析する手法が研究の中心であり、植物器官の構造形質を抽出するため採用。
abstractWe apply scanning Small- and Wide-Angle X-ray Scattering (SWAXS) and X-ray Fluorescence (XRF) on yellow pea seeds to combine local structural information on the molecular scale with imaging of cellular structures on the micrometer scale
Grain yield is a central target in wheat breeding, yet accurately predicting it remains challenging because it depends on many genes and responds strongly to environmental variation. Genomic selection (GS) has improved breeding efficiency by enabling genome-based prediction of genetic merit, but predictability (PA) for grain yield is often limited under stress environments. At the same time, advances in high-throughput phenotyping (HTP) using unmanned aerial vehicles (UAVs) provide phenomic data that capture environment-responsive plant performance and may complement genomic information. In this study, we evaluated genomic and phenomic models for predicting grain yield in elite bread wheat lines across irrigated, drought, and heat-stress environments. Using a sparse phenotyping framework, we compared parametric and non-parametric models. PA was evaluated within environments and under cross-environment sparse phenotyping scenarios. Genomic models provided a stable baseline and enabled effective information sharing across environments when phenotypic data were incomplete. Phenomics-only models captured environment-specific plant responses but were more sensitive to environmental context. Multiomics models that integrated genomic and phenomic information consistently achieved the highest PA, with the largest gains observed under stress conditions. Overall, our results demonstrate that integrating genomics and UAV-based phenomics within sparse phenotyping designs offers a practical and scalable approach to improve grain yield prediction in wheat.
Why it matches plant phenotyping methodsUAV由来のフェノミクスを用いた疎な表現型取得と予測モデルを中心に、環境横断で評価しており、収量という植物形質の推定手法が主要な貢献である。
abstractadvances in high-throughput phenotyping (HTP) using unmanned aerial vehicles (UAVs) provide phenomic data that capture environment-responsive plant performance
Reproduction assets foundThe paper's grain yield BLUEs, spectral wavelength BLUEs, and genotypic data are publicly deposited in the CIMMYT data repository (https://doi.org/10.71682/10549399), directly reproducing this paper's phenotyping measurements. No author analysis code with a public URL is stated; other URLs are generic tools/services.Dataset · publicok.com.
Paolo Vitale, Email: p.vitale@cgiar.org.
DATA AVAILABILITY STATEMENT
The datasets generated and analyzed during this study, including best linear unbiased estimates (BLUEs) for grain yield and spectral wavelengths, as well as the corresponding genotypic information, are publicly available in the CIMMYT data repository ( https://doi.org/10.71682/10549399 ).
REFERENCES
Araus, J. L.
,
Kefauver, S. C.
,
Zaman‐Allah, M.
,
Olsen, M. S.
, &
Cairns, J. E.
(2018). Translating high‐throughput phenotyping into genetic gain. Trends in Plant Science, 23(5), 451–466. 10.1016/j.tplants.2018.02.001
Brault, C.
,
Lazerges, J.
,
Doligez, A.
,
Thomas, M.
,
Ecarnot, M.
,
Roumet, P.
,
Bertrand, Y.Open asset ↗CIMMYT data repository · 10.71682/10549399lines:280-433Plant phenotyping relevance match · UnverifiedEurope PMC · checked 14 Sept 2026
Whitefly-transmitted begomoviruses cause tomato leaf curl disease (ToLCD). In India, at least 15 begomoviruses are known to cause ToLCD, posing a major challenge to resistance breeding. Although several Ty resistance loci have been introgressed from wild tomato relatives, variable resistance responses are frequently observed, likely due to mixed infections and the absence of a standardized disease scoring system. Moreover, limited knowledge of the infecting begomoviruses in resistant genotypes has hindered the effective use of donor lines in breeding programs. This study evaluated 17 homozygous Ty-gene donor tomato genotypes under natural epiphytotic conditions and identified the associated begomoviruses. To quantify disease severity, a robust disease scoring system was developed using coefficient of infection (CI) by integrating symptom parameters- leaf curling, leaf smalling, stunting, and fruiting, with population-level disease incidence. Field evaluations for two years revealed that genotypes carrying both Ty-2 and Ty-3 loci showed higher resistance, though variability existed among them. Genotypes with Ty-3 alone or Ty-5 + Ty-6 combinations also displayed substantial tolerance, and five genotypes were identified as highly resistant. Molecular indexing revealed frequent mixed infections and identified multiple begomoviruses, including a newly characterized species, tomato leaf curl Ty Pusa virus, alongside tomato leaf curl New Delhi virus, tomato leaf curl Palampur virus, tomato leaf curl Gujarat virus, and tomato leaf curl Joydebpur virus. These findings highlight a shift in begomovirus predominance and possible recombination-driven emergence of new variants. This study provides an integrated framework for evaluating ToLCD resistance and emphasizes the need for continuous reassessment of resistance sources to ensure durable tomato cultivar development.
Why it matches plant phenotyping methods植物の病徴と発病率を統合した病害重症度スコアリング法を開発し、抵抗性評価に適用しており、表現型取得法が研究の中心である。
abstractTo quantify disease severity, a robust disease scoring system was developed using coefficient of infection (CI) by integrating symptom parameters- leaf curling, leaf smalling, stunting, and fruiting, with population-level disease incidence.
Year-to-year climate variability poses a challenge for agriculture by increasing crop yield variability; therefore, there is a need to identify genotypes that can withstand these fluctuations. With the right selection criteria, genotypes with yield stability across variable environmental conditions can be selected. Methods such as Finlay-Wilkinson random regression (FWRR) may allow us to use sparse datasets-common in plant breeding pipelines-and incorporate genomic data to leverage phenotypic information from related genotypes to predict yield stability. Our objective was to examine how the number of environments and the variance among those environments affect stability predictions. We also integrate FWRR as a genomic prediction tool for characterizing yield stability, comparing it to the traditional genomic prediction models as a reference. We used three datasets: one highly unbalanced dataset for oats (Avena sativa L.) and two completely balanced datasets with different numbers of environments for barley (Hordeum vulgare L.) and wheat (Triticum aestivum L.). We fit standard Finlay-Wilkinson (FW) and FWRR models to estimate grain yield and stability under various scenarios. We found that the estimated stability values obtained were similar using balanced datasets for FW or FWRR. FWRR also achieved moderate predictive ability for stability using unbalanced datasets under 10-fold cross-validation (CV1) with new genotypes. In terms of environmental representation, selecting the right set of environments for inclusion in the model was more important than adding more environments. Our results suggest the possibility of using FWRR to select stable genotypes earlier in line development, as well as to design resource-efficient stability-testing schemes.
Why it matches plant phenotyping methodsFWRRを用いて穀類の収量安定性を推定・予測する統計的手法を検討し、環境数やデータ構成による予測性能を評価しているため、収量形質の計算的フェノタイピング手法が中心です。
abstractMethods such as Finlay-Wilkinson random regression (FWRR) may allow us to use sparse datasets-common in plant breeding pipelines-and incorporate genomic data to leverage phenotypic information from related genotypes to predict yield stability.
Salt stress can markedly alter seedling architecture, creating a need for non-destructive three-dimensional (3D) phenotyping methods capable of resolving fine plant structures. However, organ-level segmentation of plant point clouds remains challenging because of leaf overlap, slender stems, ambiguous stem–leaf boundaries, and severe class imbalance. In this study, we developed PTV-SegCo, a task-adapted Point Transformer model for organ segmentation and structural phenotyping of coriander seedlings under salt stress. PTV-SegCo integrates efficient channel attention, gated shallow–deep feature fusion, and a combined cross-entropy–Dice loss to improve representation of fine and minority organ structures. The dataset comprised 60 manually annotated 3D point-cloud samples from 12 cultivation trays repeatedly observed over five acquisition dates under six NaCl concentrations (0, 50, 100, 150, 200, and 250 mmol L −1 ). Because the earliest acquisition represented a particularly challenging developmental stage, these 12 samples were used as a fixed early-stage model-selection set, while samples from the remaining four dates were organized into four date-blocked training–validation configurations. Under this internal model-development protocol, PTV-SegCo achieved mean mAcc and mIoU values of 93.05% and 89.05%, respectively, and showed numerically higher performance than its direct backbone PTV-Seg50. These values should be interpreted as internal comparative results rather than as an unbiased estimate of generalization to unseen cultivation trays, and the present results should not be interpreted as establishing the broad competitiveness of PTV-SegCo against other point-based, convolution-based, graph-based, transformer-based, or plant-specific segmentation architectures. After semantic segmentation, reconstructed scenes were metrically calibrated using the known cultivation-tray dimensions, followed by individual-plant separation and quality control. Four reconstruction-derived structural descriptors—plant height, projected area, voxel occupancy volume, and leaf point ratio—were extracted to characterize temporal structural variation under different NaCl treatments. For treatment-level inference, individual-plant measurements were aggregated within each cultivation tray at each acquisition time, with the cultivation tray treated as the independent experimental unit. Independent manual validation showed close agreement for plant height and projected area, with R 2 values of 0.9969 and 0.986, respectively. Overall, the proposed workflow provides a feasible approach for organ-level segmentation and automated 3D structural analysis of small coriander seedlings under salt stress. The extracted descriptors primarily represent reconstruction-derived spatial characteristics and should not be interpreted as direct indicators of physiological status; voxel occupancy volume and leaf point ratio remain without direct external validation.
Why it matches plant phenotyping methods3D点群による器官セグメンテーションと構造形質抽出の手法開発・内部比較・手動検証が研究の中心であり、塩ストレスは適用対象である。
abstractwe developed PTV-SegCo, a task-adapted Point Transformer model for organ segmentation and structural phenotyping of coriander seedlings under salt stress.
Plant phenotyping relevance match · UnverifiedOpenAlex · Europe PMC · checked 14 Sept 2026
ABSTRACT Water-use efficiency (WUE), the ratio of accumulated plant biomass to water lost through transpiration has conventionally been determined using a destructive single-point measurement. Recent advances in high-throughput phenotyping now enable repeated, non-destructive estimation of biomass and WUE. However, these digital measurements must be statistically validated against conventional destructive methods to validate their use as reliable proxies. Therefore, we compared digital biomass determined point clouds produced from multispectral camera scanners with destructive harvests across eight harvests using Samsun tobacco grown under both drought and high-water conditions. WUE efficiency, calculated using the digital biomass estimated from a point cloud and gravimetric water use determinations, were compared to destructive harvest determinations. The coefficient of variation (CV) showed there were no significant differences in digital and destructive measurements for either biomass or WUE. Indicating that digital measurements can be used in place of destructive measurements. Drought plants used significantly less water and were significantly smaller than high-water plants from Harvests 4 through 8. However, there were no significant differences in the ratio of evapotranspiration to leaf area or WUE, indicating that drought plants were simply smaller and used less water than the high-water plants. This work validates that estimating plant biomass from a digital point coupled with continuous gravimetric determination of water use provides a reliable nondestructive measure of WUE in high-throughput measurements across the full plant life cycle. PLAIN LANGUAGE SUMMARY We grew tobacco plants under either a drought or high-water treatment and harvested a portion of the plants every few days for a total of eight harvests. Throughout the experiment, we collected 3D images of the plants and continuously measured pot weight to track plant growth and water use across different developmental stages. Destructive biomass served as the gold-standard measurement. We then compared biomass and water-use estimates generated from the digital measurements with the destructive measurements. The digital approach provided accurate estimates of plant biomass and water use while requiring little hands-on labor and no plant destruction. These nondestructive methods could help plant breeders identify water-efficient plants earlier in the breeding process, accelerating the development of crops that use water more efficiently.
Why it matches plant phenotyping methods3D画像による非破壊バイオマス推定と連続的な重量測定からWUEを推定する手法を、破壊収穫と比較して検証しており、植物表現型取得法が中心である。
abstractRecent advances in high-throughput phenotyping now enable repeated, non-destructive estimation of biomass and WUE. However, these digital measurements must be statistically validated against conventional destructive methods to validate their use as reliable proxies.
Abstract Tree crowns are complex, three‐dimensional structures whose morphology varies among species, individuals and environments. Although light detection and ranging (LiDAR) provides high‐resolution, single‐tree point clouds that advance species discrimination and the assessment of intraspecific variation in situ, crown shape is still commonly reduced to low‐dimensional metrics (e.g. crown diameter or crown base height), losing much of its three‐dimensional geometric complexity. We introduce a fully 3D geometric morphometric framework that captures crown shape directly from LiDAR point clouds at both species and individual levels. Pre‐segmented LiDAR single‐tree point clouds of eight temperate forest species were converted into three‐dimensional shape representations using radial bounding volumes (RBVs), which partitioned each crown into a standardized set of vertical layers and radial sectors. Surface points automatically digitized from each RBV formed geospatially aligned, 3D pseudolandmark configurations representing geometric morphometric crown shapes. These configurations served as the input data for multivariate analyses of crown shape variation within and between species. Twelve structural traits, including crown and stem dimensions, were extracted from the same RBVs and integrated into analyses of trait–shape associations. The morphospace of crown shape was structured along different axes of variation in broadleaf species than in conifers. Within these groups, species pairs—such as Fagus versus Quercus and Picea versus Pinus —exhibited contrasting intraspecific morphological gradients, with different structural traits driving shape variation in each. Crown base height and total crown height emerged as the strongest predictors of crown shape. Differences in crown shape among species were primarily captured by symmetric components, with asymmetry providing a negligible signal. Interspecific differentiation was largely driven by architectural variation rather than pure size differences. Morphological differences derived from pseudolandmarks and convolutional neural network features exhibited stronger correlations in conifers than in broadleaf species. We present a reproducible, LiDAR‐native framework for quantifying and comparing 3D crown morphology within and across species. Using the RBV approach, geospatially aligned pseudolandmarks can be derived from any pre‐segmented, single‐tree LiDAR point cloud, enabling scalable, multi‐regional analyses of intraspecific variability. This framework provides a robust foundation for integrating crown shape into ecological, evolutionary, silvicultural and modelling studies, including assessments of environmental effects and architectural constraints.
Why it matches plant phenotyping methodsLiDAR点群から樹冠形状を抽出・定量化する3D幾何形態計測フレームワークを開発し、再現可能な植物形態計測手法として検証・適用しているため。
abstractWe introduce a fully 3D geometric morphometric framework that captures crown shape directly from LiDAR point clouds at both species and individual levels.
Maize ear geometry (length, width, curvature, and volume) is closely tied to yield and grain-filling outcomes, but existing high-throughput phenotyping pipelines remain constrained by the cost, labor, and specialized hardware they require. We developed and validated a low-cost pipeline that reconstructs a watertight 3-D mesh of a maize ear from a single 20-second video captured with a consumer-grade DSLR on a motorized turntable under uniform LED illumination. Camera poses from a multi-seed COLMAP procedure initialize a Neural Radiance Field (NeRF), and a cylindrical holder of known diameter, visible in every frame, provides automatic metric scaling with downstream geometric quality control. Applied to 300 ears spanning a diverse maize inbred panel, 250 (83.3%) passed automated processing and quality control. Skeleton length agreed with manual caliper measurements across all 250 ears (R^2 = 0.964, RMSE = 4.68 mm), and convex-hull volume agreed with water-displacement volume on a 15-ear subset spanning the full size range (R^2 = 0.982, RMSE = 5.26 mL). Residual length error grew with ear curvature, whereas bounding-box height, which records the same straight-line chord as calipers, showed no such trend; the discrepancy therefore originates in the measurement definition, since calipers record the chord while skeleton length traces the geodesic arc. The capture hardware costs approximately 607 USD, and operator involvement fell from roughly five minutes to one minute per ear, with all downstream processing running unattended. The platform provides a foundation for breeding-scale 3-D ear phenotyping.
Why it matches plant phenotyping methodsトウモロコシ雌穂の3D形態形質を抽出する低コスト画像計測パイプラインを開発し、手動測定および体積測定で技術検証しているため、方法が研究の中心である。
abstractWe developed and validated a low-cost pipeline that reconstructs a watertight 3-D mesh of a maize ear
To overcome YOLOv11’s limitations in complex field environments, this paper proposed SDD-YOLOv11n, a lightweight real-time detector for soybean diseases. The model reconstructed the backbone using GhostConv to minimize redundancy and integrates a C3k2_Star module to enhance small lesion detection against background noise. Additionally, a Detect Efficient (DE) head further compressed the architecture. Experimental results verified the model's efficiency, achieving a parameter count of 1.88 M and a weight size of 3.9 MB—reductions of 27.3% and 25% compared to YOLOv11n, respectively. Furthermore, the model maintained high detection performance with a Mean Average Precision (mAP50) of 75.6% and an F1-score of 69.3%, demonstrating its effectiveness in balancing architectural efficiency and accuracy in complex field environments.
Why it matches plant phenotyping methods圃場のダイズ病害病斑を画像から検出する軽量YOLOモデルの開発と性能評価が研究の中心であり、植物の病害状態を直接推定するフェノタイピング手法に該当する。
titleREAL-TIME AND PRECISE DETECTION OF FIELD SOYBEAN RUST AND BACTERIAL SPOT BASED ON IMPROVED YOLOV11N
Surface phenotyping underpins plant science, preclinical animal research and entomology, yet across all three the measurement is almost always a photograph, which records a projection and not the surface itself. Here we present the Gentschinator3000 , an open structured-light platform that brings high-end metric surface measurement within reach of laboratories with no optics expertise, combining documented open hardware, open reconstruction software and analysis workflows for under 4000 Euro in components. It resolves a planar reference to 45 µm local flatness, registers full rotations to a loop closure of 156 µm, and performs stably across acquisition ranges that we define. Applying one workflow to a leaf before and after desiccation, to murine anatomy and to a spread lepidopteran, we find that projection underestimates surface area by 11 to 41 %. That error grows with the condition under study, with the evaluation scale and with the direction of view, so it can confound phenotype comparisons dramatically. In murine limbs a 15-degree change of viewing direction shifts a projected inter-segment angle by up to 23.2 degrees, while the three-dimensional angle does not move. Projection geometry can therefore contribute as much to a measured phenotype as the biology it is meant to quantify.
Why it matches plant phenotyping methods植物表面の三次元形状を測定するオープンな構造化光プラットフォームと再構成・解析ワークフローを開発し、葉で投影バイアスを評価しており、表現型取得手法が中心である。
abstractHere we present the Gentschinator3000 , an open structured-light platform that brings high-end metric surface measurement within reach of laboratories with no optics expertise, combining documented open hardware, open reconstruction software and analysis workflows for under 4000 Euro in components.
Reproduction assets foundThe paper explicitly deposits three public Zenodo records: reconstructed 3D surfaces of all specimens (including the leaf and hop cone phenotyping measurements), the authors' analysis notebooks with derived and per-panel source data, and the reconstruction software with build documentation and working examples. All areDataset · publicData availability
1149
The reconstructed surfaces supporting this study are available at Zenodo under
1150
https://doi.org/10.5281/zenodo.22167250.54
1151
Source data for all graph panels are provided with this paper; for panels showing
1152
rendered surfaces, the underlying reconstructions are in the same record.
1153
1154
Code availability
1155
The analysis notebooks, environment specifications, derived data and per-panel
1156
source data are available at Zenodo under
1Open asset ↗Zenodo · 10.5281/zenodo.22167250pdf-raw-page:35 lines:1-52Code · public1151
Source data for all graph panels are provided with this paper; for panels showing
1152
rendered surfaces, the underlying reconstructions are in the same record.
1153
1154
Code availability
1155
The analysis notebooks, environment specifications, derived data and per-panel
1156
source data are available at Zenodo under
1157
https://doi.org/10.5281/zenodo.22167598.55
1158
The reconstruction software, build documentation and minimal working examples
1159
are available at https://doi.org/10.5281/zenodo.22167471.56
1160
The software and analysis notebooks are released under the MIT licence and the
1161
hardware design files under CERN-OHL-P v2. The visible-light platform described
1162
hereOpen asset ↗Zenodo · 10.5281/zenodo.22167598pdf-raw-page:35 lines:1-52Plant phenotyping relevance match · UnverifiedCrossref · checked 14 Sept 2026
Published31 Aug 2026International Journal of Advances in Intelligent InformaticsCited by 0 · OpenAlex ↗
Pepper / chilliPotatoTomatoLeafClassificationVisualization / data managementDisease symptoms / severity
Early detection of plant leaf diseases is critical for minimizing crop losses and supporting precision agriculture. While Convolutional Neural Networks (CNNs) have demonstrated high accuracy in image-based diagnosis, conventional architectures may not optimally balance spatial localization and channel-wise feature refinement, particularly in multi-crop classification settings. This study proposes a redundancy-aware dual-attention architecture, termed ATSA-DenseNet, which integrates the spatial branch of the Convolutional Block Attention Module (CBAM-Spatial) with Efficient Channel Attention (ECA) within a DenseNet121 backbone. Unlike prior dual-attention frameworks that retain full CBAM and introduce channel-level redundancy, the proposed design isolates complementary spatial and channel mechanisms to improve representational efficiency without increasing computational complexity. The framework is evaluated on controlled multi-crop PlantVillage-derived datasets comprising tomato, potato, pepper, and maize. Across both 3-crop and 4-crop configuration, ATSA-DenseNet consistently outperforms baseline DenseNet121 and single-attention variants, achieving 99.94% accuracy and 0.9994 macro-F1 on the 4-crop setting while maintaining a lightweight footprint (6.96M parameters, 2.87G FLOPs). Grad-CAM visualizations indicate improved localization of disease-relevant regions compared to the baseline. While results are obtained under controlled imaging conditions, the findings demonstrate that redundancy-aware dual-attention enhances feature discrimination efficiency in multi-class agricultural classification tasks. Future work will extend validation to real-field datasets with natural variability.
Why it matches plant phenotyping methods植物葉の病害状態を画像から推定するCNN手法を提案・評価しており、病害表現型の取得・分類手法が研究の中心である。
abstractThis study proposes a redundancy-aware dual-attention architecture, termed ATSA-DenseNet, which integrates the spatial branch of the Convolutional Block Attention Module (CBAM-Spatial) with Efficient Channel Attention (ECA) within a DenseNet121 backbone.
Rice false smut is a major panicle disease that affects rice yield and grain quality and is an important target for resistance evaluation in breeding programs. Accurate field phenotyping is important for disease assessment and resistance screening, yet current assessment relies heavily on manual visual scoring and smut ball counting, which are laborious and subject to evaluator variation. In close-range single-panicle images, false smut balls are often small, dense, occluded, adhered, making automatic detection and severity grading difficult. To address these challenges, we developed a YOLOv12-RSLW detector by integrating RepGhost, SimAM, LSCD, and WIoU into YOLOv12. Detection boxes were then used to guide the Segment Anything Model for panicle and lesion mask extraction, allowing calculation of the lesion-to-panicle area ratio as a supplementary indicator for count-based severity grading. A total of 1911 original field images were collected. After augmentation, the dataset contained 5663 images, including 4531 training images, 566 validation images, and 566 test images. Detection performance was evaluated on the test set, while SAM segmentation was assessed using 80 manually annotated original images. YOLOv12-RSLW achieved 92.06% mAP@0.5, 91.46% precision, and 87.01% recall, with 3.45 M parameters and 6.0 GFLOPs. Compared with the baseline YOLOv12, mAP@0.5 and recall increased by 3.60 and 4.37 percentage points, respectively. Within the augmented dataset, 41.2% of samples initially assigned to Grade 1 and 28.1% of those assigned to Grade 2 met the area-ratio criteria for potential reassignment to higher grades. The framework provides a quantitative approach to rice false smut severity phenotyping and may support future resistance breeding after further validation.
Why it matches plant phenotyping methodsイネいもち病の病徴を画像から検出・分割し、病斑面積比に基づく重症度を定量化するフェノタイピング手法を開発・評価しており、方法が研究の中心である。
abstractTo address these challenges, we developed a YOLOv12-RSLW detector by integrating RepGhost, SimAM, LSCD, and WIoU into YOLOv12.
Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · checked 14 Sept 2026
Why it matches plant phenotyping methods画像から種子の形態・色形質を抽出し、生化学形質と統合したマルチモーダル表現型解析・機械学習分類法の開発と比較評価が研究の中心であるため。
abstractThis study developed an explainable machine learning framework integrating morphological, color, and biochemical characteristics for classifying chia ( Salvia hispanica L.) genotypes.
Plant diseases greatly affect agricultural production, especially in developing countries, where prompt diagnosis can be quite challenging due to the limited availability of experts in real-time. Deep learning techniques for image analysis is gaining popularity and are increasingly considered an alternative to traditional manual inspection of plants. This research presents the evaluation of plant leaf disease detection system based on a convolutional neural network (CNN) optimized with different nature-inspired algorithms. The backbone model is based on the EfficientNet-B0 pretrained on ImageNet. Therefore, transfer learning is used to adapt the model to an updated PlantVillage dataset. Experiments have been conducted with multiple nature-inspired algorithms to improve generalisation and training efficiency of the prediction model. Different data preparation techniques have been carefully applied to the dataset, creating a unified approach to ensure consistency in the preprocessing pipeline for the training, validation, and testing phases. Our experiments indicate that application of the grey wolf optimizer (GWO) for tuning key hyperparameters of the model, including dropout, learning rates, and weight decay produced the best results, with an accuracy around 99.45%.
Why it matches plant phenotyping methods植物葉の病害状態を画像から分類する深層学習手法を、複数の最適化アルゴリズムで評価・改良しており、病害表現型の取得・推定が研究の中心である。
abstractThis research presents the evaluation of plant leaf disease detection system based on a convolutional neural network (CNN) optimized with different nature-inspired algorithms.
Abstract - Plant diseases can significantly affect plant growth, productivity, and overall health. This research presents a mobile-based plant analysis system designed to identify plants, assess their health condition, and analyze visible diseases from plant images. The proposed system allows users to capture an image using a mobile camera or upload an existing image. The image is processed and analyzed using machine learning and deep learning techniques. A Convolutional Neural Network (CNN) can be used to learn visual features such as leaf shape, color, spots, and disease symptoms for plant identification and disease analysis. The system also provides a health assessment and disease severity indication to support users in understanding the condition of a plant. A Flutter-based mobile application provides the user interface, while Python and Flask can be used for image-processing and model-serving tasks. The proposed approach aims to provide a simple and accessible tool for preliminary plant identification, health assessment, and disease analysis. Key Words: plant identification, plant health assessment, disease analysis, CNN, deep learning, Flutter.
Why it matches plant phenotyping methods植物画像から健康状態と病害症状・重症度を推定する機械学習システムの開発が中心であり、植物の病害状態という表現型を画像から取得・評価する方法を扱っている。
abstractThis research presents a mobile-based plant analysis system designed to identify plants, assess their health condition, and analyze visible diseases from plant images.
Goal. To substantiate the methodical approaches to analyzing the state of soybean crops based on the results of aerial photography with UAV by comparing manual vectorization, controlled classification according to the algorithm of maximum similarity, and uncontrolled classification of K-Means, as well as to determine the feasibility of their combination with expert visual interpretation to assess the spatial structure of the vegetation cover. Methods. Aerial photography of the test proving ground was performed with the help of the unmanned aerial vehicle DJI Phantom 4 Advanced with the subsequent photogrammetric study of materials and the formation of a highly detailed orthophotoplane. In the QGIS environment, visual decryption and manual vectorization of the main objects of the agrolandscape were carried out with the creation of polygonal layers. For automated mapping, methods of controlled classification according to the algorithm of maximum similarity and uncontrolled classification based on the K-Means algorithm were used. The accuracy of the results was evaluated by comparing the data of automated classifications with the data of manual digitization, which was used as a reference (control) method. On the basis of the results obtained, empirical data were summarized to justify practical recommendations for the application of the studied approaches. Results. The study was conducted on the territory of the research farm of the Separate subdivision of the National University of Life and Environmental Sciences of Ukraine «Berezhany Agrotechnical Institute» (vil. Pavliv, Ternopil district, Ternopil oblast) (49.452057°N; 24,805818°E) in may – august 2025. The obtained cartographic materials made it possible to quantify the areas of the main objects of the agro-landscape and identify problem areas with sparse shoots. Methods of controlled classification showed greater compliance with the digitization data (average deviation — 6.7%) compared to uncontrolled (14.7%), which were effective from the point of view of preliminary assessment of spectrally homogeneous sections, but did not provide an accurate division of shoots by density. Analysis of the spatial structure of coverage made it possible to plan local agrotechnical measures and assess the potential yield. Conclusions. Methodical approaches to analyzing the state of soybean crops based on the results of aerial photography with a UAV equipped with RGB cameras are promising and economically feasible. Automated classification methods are effective for highlighting hard and contrasting objects and small-contoured areas, while a detailed assessment of the structure of the vegetation cover is advisable to carry out using a controlled classification in combination with expert visual interpretation.
Why it matches plant phenotyping methodsUAV画像を用いて大豆作物の植生被覆構造や疎な出芽域を抽出し、複数の分類法を手動ベクトル化と比較・精度評価している。植物状態の取得手法自体が研究の中心である。
abstractTo substantiate the methodical approaches to analyzing the state of soybean crops based on the results of aerial photography with UAV by comparing manual vectorization, controlled classification according to the algorithm of maximum similarity, and uncontrolled classification of K-Means
All living organisms rely on the movement of ions across cell membranes as the fundamental physical basis of their internal energy and signaling, and plants are no exception. Plants perceive, integrate, and respond to environmental stimuli through electrical signals, classified as action, variation, and system potentials, that are coupled with calcium waves, reactive oxygen species, and hydraulic and hormonal changes to coordinate whole-organism responses despite the absence of a nervous system. Yet most studies characterize these signals using a single feature, such as amplitude or spike duration, in a single tissue, an approach that cannot establish how such signals correspond to the underlying ionic activity, mobility, and structural complexity of the signaling environment, or how this correspondence varies across organs. Here, we correlate plant bioelectrical signals with potential ionic energy flow using a multi-domain framework, combining discrete spike events, continuous waveform properties, spectral composition, and signal complexity applied to leaf, stem, and root recordings from tomato ( Solanum lycopersicum ) exposed to different stimulus. Electrical activity with increased stimulus strength, likely reflecting increased ionic flow, with the root showing the largest response. This suggests plant electrical signaling works as a distributed, ion-based information system, useful for stress monitoring and bio-inspired sensor design.
Why it matches plant phenotyping methods植物の電気生理シグナルを多面的に取得・解析する枠組みを中心に扱い、ストレスモニタリングへの応用可能性を示しているため、植物状態の測定方法として含める。
abstractHere, we correlate plant bioelectrical signals with potential ionic energy flow using a multi-domain framework, combining discrete spike events, continuous waveform properties, spectral composition, and signal complexity applied to leaf, stem, and root recordings from tomato
Plant stress biology has traditionally relied on the analysis of snapshot measurements—including hormone levels, reactive oxygen species, transcripts, and physiological traits—which primarily characterize the current state of the cell, whereas the physical consequences of previous stress exposure remain considerably less accessible to direct measurement. This distinction may be particularly important under natural conditions, where plants experience recurrent, sequential, and combined stresses. This raises a fundamental question: can a cell, after physiological recovery, retain a measurable residual physical state that reflects aspects of its previous stress history and influences its response to subsequent stress? Here, we propose Environmental Phase Imprinting (EPI) as a testable biophysical hypothesis according to which environmental stress may leave a measurable imprint on the physical state of biomolecular condensates that persists after cessation of the initial exposure. EPI is not proposed as a new form of biological information or as an established mechanism of stress memory, but rather as a potential physical substrate, correlate, or consequence of previously described forms of cellular stress memory. To operationalize this hypothesis, we introduce the Plant Condensate Code (PCC), a multidimensional conceptual framework designed to move from a static “snapshot” of cellular state toward a time-resolved physical trajectory. PCC integrates complementary characteristics of condensate populations, including morphology, dynamics, molecular mobility, material state, and molecular composition, across a sequence of states encompassing baseline, stress, adaptation, recovery, and the post-stress state.We propose that the trajectory of condensate states, rather than any single measurement, may contain information about cellular stress history and may help explain differences in responses to recurrent or combined stress. Multimodal approaches, including live-cell imaging, fluorescence recovery after photobleaching (FRAP), molecular mobility analysis, microrheology, Brillouin microscopy, quantitative phase imaging, and molecular profiling, could provide complementary measurements of this physical state. PCC is further positioned within our broader conceptual research program encompassing Cytoplasmic Phase Homeostasis, Cytoplasmic Phase Sensing, and the Plant Threat Matrix (PTM)—a proposed six-state framework for describing plant physiological states under stress. Within this framework, physical measurements of condensate and cytoplasmic states may represent one possible approach for defining and quantitatively characterizing cellular physiological states. Finally, we discuss the potential application of this conceptual framework to stress-resilience phenotyping, evaluation of biostimulants, and selection for stress tolerance, while clearly distinguishing experimentally established phenomena from hypotheses and conceptual proposals. The proposed framework may provide a foundation for the development of a new direction in biophysical phenotyping of plant stress resilience, complementing molecular and physiological approaches to the study of stress memory.
Why it matches plant phenotyping methods植物ストレス履歴を測定・定量化するための新しい生物物理的フェノタイピング枠組みを中心に提案しており、単なるストレス生物学実験ではない。ただし実証ではなく概念的な方法開発提案である。
abstractTo operationalize this hypothesis, we introduce the Plant Condensate Code (PCC), a multidimensional conceptual framework designed to move from a static “snapshot” of cellular state toward a time-resolved physical trajectory.
This paper presents an integrated system design for autonomous quadcopter flight path generation using the MAVLink protocol and a custom Ground Control Station (GCS) for precision agricultural crop monitoring. The system combines three coverage path algorithms (Boustrophedon, Spiral, and Energy-Optimized), a Pixhawk 4 / ArduPilot flight stack, a MicaSense RedEdge-P multispectral payload, and a ROS2-based GCS for mission planning, telemetry, and vegetation-index-based crop health assessment. The 2.8 kg quadcopter (450 mm frame, 4-cell LiPo) achieves 22–25 minutes of flight time. Across five field sizes (0.5–10 ha), the Energy-Optimized path achieved 96.5% coverage efficiency with 4.2% overlap and a 12.4% energy reduction over the Boustrophedon baseline. NDVI-based crop segmentation achieved pixel accuracy of 92.5% (maize), 94.1% (rice), and 90.8% (wheat), and four-class crop-health classification achieved a weighted F1-score of 90.0%. MAVLink 2.0 command latency averaged 15.8 ms with 99.3% packet delivery at ranges up to 800 m. An ablation study showed additional gains of 1.5–3.1% coverage from wind compensation and 2.1–2.8% from terrain-following.
Why it matches plant phenotyping methods自律ドローン、マルチスペクトル撮像、NDVIセグメンテーションによる作物健康状態推定を統合し、飛行・画像解析性能を定量評価しているため、植物状態の取得・抽出が技術的に実質的な構成要素である。
abstractThe system combines three coverage path algorithms (Boustrophedon, Spiral, and Energy-Optimized), a Pixhawk 4 / ArduPilot flight stack, a MicaSense RedEdge-P multispectral payload, and a ROS2-based GCS for mission planning, telemetry, and vegetation-index-based crop health assessment.
Cauliflower emergence rate and seedling growth are key indicators of field conditions and varietal potential. Traditional manual surveys are unsuitable for continuous monitoring across multiple varieties. This study integrates UAV RGB imagery with the DualSlim-YOLO model to estimate cauliflower emergence rates and monitor seedling growth. Built on YOLOv11, the model incorporates a lightweight feature extraction structure and an optimized detection-scale configuration. It reduces computational complexity while maintaining detection accuracy, thereby improving the efficiency of cauliflower seedling detection. DualSlim-YOLO achieved P, R, F1-score, mAP@0.5, and mAP@0.5:0.95 of 95.35%, 96.75%, 96.05%, 98.55%, and 86.65%, respectively. The number of parameters was reduced by 38.61%, while the inference speed increased by 22.16%, demonstrating good lightweight performance. Based on this model, UAV images of 171 cauliflower varieties acquired at 7, 21, and 28 d after transplanting were used for seedling detection and emergence rate estimation. In addition, 18 time-series seedling phenotypic traits were extracted, enabling a comprehensive quantitative evaluation of emergence dynamics and early-growth performance across multiple cauliflower varieties. This method effectively screens cauliflower varieties for high emergence rates, rapid emergence, and excellent seedling growth performance. It provides technical support for high-throughput, nondestructive seedling phenotyping and early germplasm screening under field conditions.
Why it matches plant phenotyping methodsUAV画像と軽量YOLOモデルを用いて、カリフラワー苗の検出、出芽率推定、18種類の時系列表現型形質抽出を行う手法が中心であり、モデル性能も検証している。
abstractThis study integrates UAV RGB imagery with the DualSlim-YOLO model to estimate cauliflower emergence rates and monitor seedling growth.
Visible-near infrared (Vis-NIR) spectroscopy provides rapid crop disease assessment; however, poor model generalizability remains a major limitation when models developed for a specific period are applied to batches collected at different times, primarily due to variations in physicochemical properties such as chlorophyll content, moisture level, surface texture, and tissue structure, which induce shifts in spectral distributions across batches. This study investigates deep domain adaptation to enhance cross-batch transferability for sugarcane disease classification. Two batches of healthy and symptomatic leaves were collected at different times using the same spectrometer. A customized one-dimensional convolutional neural network (1D-CNN) was trained on Batch 1 and adapted to Batch 2 using labelled samples through two strategies: retraining only the fully connected layers or fine-tuning all network parameters. Both strategies achieved 94% accuracy, with precision 0.92, sensitivity 0.97 and specificity 0.98, outperforming the non-adapted model and standard-free calibration transfer methods, namely Correlation Alignment and Transfer Component Analysis. These findings demonstrate that deep domain adaptation substantially improves the robustness and transferability of Vis-NIR classification models across heterogeneous sampling batches.
Why it matches plant phenotyping methodsサトウキビ葉の病徴分類を対象に、Vis-NIR分光と深層ドメイン適応によるモデルの開発・クロスバッチ検証が研究の中心であり、植物病害状態を直接推定している。
abstractThis study investigates deep domain adaptation to enhance cross-batch transferability for sugarcane disease classification.
Plant phenotyping relevance match · UnverifiedOpenAlex · Europe PMC · bioRxiv · Crossref · checked 11 Sept 2026
Published30 Aug 2026bioRxiv (Cold Spring Harbor Laboratory)
Abstract The integration of digital technologies for high-throughput field phenotyping is critical for accelerating crop improvement in agriculture. However, extracting traits from remote sensing data remains constrained by fragmented workflows, manual intervention, and limited interoperability among existing tools, resulting in delays that hinder timely biological insight and decision-making. To address these challenges, we present PhenoStream (Phenotyping Streaming), a scalable, end-to-end cyberinfrastructure designed to automate the full lifecycle of aerial imagery–based phenotyping, from data acquisition to plot-and genotype-level inference. The framework integrates automated data ingestion from distributed field sites, geospatial processing, and AI-enabled trait extraction within a unified, user-accessible graphical interface. Its modular and extensible architecture supports adaptable trait modeling and seamless integration of new data sources, enabling deployment across diverse crops, environments, and experimental designs. We demonstrate the system across a large multi-location field trial network of bioenergy crops, where it enables high-throughput characterization of spatiotemporal growth dynamics, genotype-by-environment (G×E) interactions, and predictive modeling of key agronomic traits. By significantly reducing processing latency and manual effort, the platform facilitates near-real-time analysis and reproducible workflows. This work establishes a generalizable and scalable pathway for operationalizing very-high-spatial resolution aerial phenotyping in agricultural research. By bridging data acquisition and analytics, the end-to-end cyberinfrastructure provides a foundation for integrating heterogeneous and unstructured data streams—including remote sensing, environmental, and management data—toward data-driven decision making in agriculture.
Why it matches plant phenotyping methods航空画像から作物形質を自動抽出するエンドツーエンドのフェノタイピング基盤を開発・実証しており、形質取得と解析ワークフローが研究の中心です。
abstracta scalable, end-to-end cyberinfrastructure designed to automate the full lifecycle of aerial imagery–based phenotyping, from data acquisition to plot-and genotype-level inference.
Background: Faba bean is an important legume crop valued for its nutritional and soil-enriching benefits, yet its productivity is severely affected by foliar diseases. Automated image-based detection using deep learning provides a rapid and reliable approach for early disease identification and improved crop management. Methods: This study developed a machine learning-based automated framework for multi-class classification of Faba bean leaf diseases using transfer learning with the VGG16 convolutional neural network. A dataset of 8,021 RGB images collected under natural field conditions was used, comprising four classes: healthy, rust, gall and chocolate spot. Images were resized to 224 × 224 pixels and normalized prior to training. The pretrained convolutional layers of VGG16 were frozen and a custom classification head with global average pooling and dropout regularization was added. Model performance was evaluated using classification metrics. Result: The proposed model achieved an overall classification accuracy of 92.34% and a macro-averaged F1-score of 0.9227 on the test dataset. Strong classification performance was observed across all disease categories, with particularly high predictive accuracy for healthy and rust classes. The findings demonstrate the effectiveness of transfer learning for plant disease detection and highlight its potential for scalable, automated crop health monitoring in precision agriculture.
Why it matches plant phenotyping methods植物葉画像から病害状態を自動推定する深層学習手法の開発・性能評価が中心であり、植物フェノタイピング手法に該当する。
abstractThis study developed a machine learning-based automated framework for multi-class classification of Faba bean leaf diseases using transfer learning with the VGG16 convolutional neural network.
Xylella fastidiosa (Xf) is among the most devastating phytosanitary threats to Mediterranean agriculture, causing Olive Quick Decline Syndrome (OQDS). Since containment efficacy depends on timely intervention, scalable in-field screening tools are needed. This study evaluates a portable digital electronic nose, based on a carbon-nanotube sensor array combined with artificial intelligence algorithms, for the in-field screening of Xf through volatile organic compound (VOC) profiling. Three replicate acquisitions were performed on 130 olive trees (390 measurements) across four cultivars (Cellina di Nardò, Ogliarola Salentina, Ogliarola Barese, and Leccino) in four Italian regions (Apulia, Calabria, Lazio, and Tuscany). Plant status was assigned from the official status of the sampling area (demarcated OQDS focus versus Xf-free area) and supported by real-time quantitative PCR (qPCR) on every plant; within demarcated sites, plants with undetectable DNA in sampled twigs were retained as Xf+ following phytosanitary criteria, giving 216 infected and 174 healthy samples. The multidimensional sensor signals were processed with an optimized Shallow Neural Network. Under plant-grouped 80/20 validation, keeping each plant’s replicates in the same subset, the model achieved (93.3 ± 4.0)% accuracy, (97.7 ± 3.5)% sensitivity, and (88.2 ± 8.3)% specificity (mean ± SD). A feature-importance analysis revealed a reproducible, though not chemically resolved, VOC-related response pattern. This low-cost, portable Internet of Things (IoT) device offers a proof-of-concept screening approach for Xf surveillance, pending plant-level and external validation.
Why it matches plant phenotyping methods植物の感染状態をVOCセンサーとAIで直接推定する現地スクリーニング手法を開発・評価しており、植物病害状態の取得が研究の中心である。
abstractThis study evaluates a portable digital electronic nose, based on a carbon-nanotube sensor array combined with artificial intelligence algorithms, for the in-field screening of Xf through volatile organic compound (VOC) profiling.
Abstract Purpose Evaluate how soil and canopy sensing can map within-block variability in tart cherry orchards and identify indicators robust enough for repeatable management decisions. Methods Soil apparent electrical conductivity (ECa) was mapped in spring 2022 across four commercial tart cherry blocks (8.5–10.5 ha; approximately 3,500 trees per block), followed by canopy sensing in 2023–2024. Canopy structure was measured using unmanned aerial vehicle (UAV) photogrammetry and mobile terrestrial laser scanning (MTLS) using light detection and ranging (LiDAR), and canopy density using mobile ceptometry. Spatial layers were aligned to per-tree grid cells. An August 2025 campaign compared UAV- and LiDAR-derived tree height with ground-truthed height. Results Soil-to-canopy relationships were weak to moderate but consistent within blocks ( r = 0.10–0.40), with strength and direction varying by site conditions. Canopy density was more strongly associated with UAV-derived volume than height. UAV-derived 90th-percentile height best predicted ground-truthed height ( R ² = 0.89; RMSE = 0.34 m), whereas LiDAR showed a weaker relationship and greater error ( R ² = 0.70; RMSE = 0.52 m). Cross-sensor agreement was moderate to strong ( r = 0.41–0.65). Per-tree rankings were stable between years for UAV height and volume. Conclusion Whole-block sensing revealed persistent spatial patterns that could support management-zone delineation. UAV photogrammetry provided accurate canopy metrics, MTLS offered measurements suited to routine orchard operations, ceptometry added seasonal canopy-density information, and ECa provided soil context. Occasional ECa mapping combined with strategically timed UAV surveys and other sensors as needed could reduce redundant sensing while supporting fertilizer evaluation, pruning, and labor allocation.
Why it matches plant phenotyping methodsUAVフォトグラメトリ、LiDAR、セプトメトリーによる樹冠の高さ・体積・密度の取得を中心に、地上実測との検証とセンサー間比較を行っているため、植物フェノタイピング手法の実質的な適用・検証に該当する。
abstractCanopy structure was measured using unmanned aerial vehicle (UAV) photogrammetry and mobile terrestrial laser scanning (MTLS) using light detection and ranging (LiDAR), and canopy density using mobile ceptometry.
Rice leaf diseases pose a significant threat to global food security by reducing crop productivity and causing substantial economic losses. The traditional diagnosis method is manual method, which is low in efficiency, subjective and not suitable for large-scale agricultural monitoring. Despite the advances in automated disease detection using deep learning methods like CNNs, GANs, and transfer learning models, these techniques remain highly computational, not very flexible, and struggle to perform well in different imaging scenarios. Considering these drawbacks, this paper introduces an Explainable Deep Q-Learning based CNN framework which employs CNN-based feature extraction and Deep Q-learning-based adaptive policy optimization for rice leaf disease classification. The proposed model continuously refines the classification actions through reward-based learning, which makes the model more robust in various agricultural imaging environments, in contrast to traditional supervised CNN models that have static classification decisions. The proposed model achieved 98.5% accuracy, 98.52% precision, 98.50% recall, and a 98.51% F1-score, outperforming existing CNN, GAN, reinforcement learning, and transformer-based methods. It also offers a high computational efficiency of 14.2 GFLOPs, 248 MB memory consumption, ~ 48 min of training time, and 6.8 ms inference time per image suitable for resource constrained applications in agriculture. The results demonstrate the effectiveness, scalability, and practical applicability of the proposed framework. The proposed framework performs well on benchmark datasets but more research in the deployment of the edge-devices under different real-world agricultural settings will be investigated in future work.
Why it matches plant phenotyping methodsイネ葉の病害状態を画像から分類する深層学習手法の開発・評価が研究の中心であり、植物の病害表現型を直接推定しているため。
abstractthis paper introduces an Explainable Deep Q-Learning based CNN framework which employs CNN-based feature extraction and Deep Q-learning-based adaptive policy optimization for rice leaf disease classification.
Reproduction assets foundThe paper trains its Deep Q-CNN rice leaf disease classifier on public Kaggle rice leaf image datasets, which are cited with explicit public URLs and qualify as paper-specific phenotyping image inputs. The authors' own derived data/analysis artifacts are only available upon request, so no authors' code or trained modelDataset · publicSoni Gautam. Rice Leaf Bacterial and Fungal Disease Dataset. Kaggle. Available:Open asset ↗Kagglepdf-page:24 lines:1-94Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Plant diseases are still posing a challenge to the productivity, quality of crops, and food security, especially in locations where field diagnosis is based on manual visual inspec-tion. This paper assesses deep learning network-based automated classification of plant leaf diseases on public RGB leaf-image datasets, such as the Kaggle New Plant Diseases Dataset (Augmented) and PlantVillage images. They investigated four archi-tectures: EfficientNetV2B0, ResNet152V2, DenseNet201, and one hybrid Vision Trans-former (ViT)-based model. The steps of the experiment involved loading the dataset, exploratory analysis, preprocessing, resizing, normalizing, augmentation, transfer learning, independent model training, and evaluation metrics such as accuracy, preci-sion, recall, F1-score, training curves, testing results, and confusion matrices. The hy-brid ViT-based model was reported to have the best accuracy of 99.5%. On the smaller seven class subset of PlantVillage, EfficientNetV2B0 scored 98.11%. On the 38-class dataset, DenseNet201 improved test accuracy (97.34) and validation classification ac-curacy (around 98). ResNet152V2 scored 97.01 on the 38-class test set. The results demonstrate that CNN and transformer-based models can help to recognize plant diseases accurately whereas hybrid attention-based structures provide a promising path to enhance fine-grained classification. Since the model notebooks had varying class settings and splits, the comparison is seen as a model-structured assessment as opposed to a precisely identical benchmark across all architectures.
Why it matches plant phenotyping methods植物葉画像から病害状態を分類する深層学習手法を複数モデルで比較・評価しており、病害表現型の取得・抽出と技術検証が研究の中心である。
abstractThis paper assesses deep learning network-based automated classification of plant leaf diseases on public RGB leaf-image datasets
Reproduction assets foundThe paper's phenotyping inputs are two public plant leaf-image datasets explicitly named in the Data Availability statement: the Kaggle New Plant Diseases Dataset (Augmented) and the PlantVillage dataset, both with public URLs. No author code, models, or supplementary materials are deposited (supplementary materials: 'Dataset · publicy available. Plant leaf images were
obtained from the Kaggle New Plant Diseases Dataset (Augmented) and PlantVillage
datasets. The datasets contain publicly accessible RGB images of healthy and diseased
plant leaves used for supervised image classification research.
DATASET SOURCES
Kaggle New Plant Diseases Dataset (Augmented):
https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset
PlantVillage Dataset: https://plantvillage.psu.edu/All processed data, experimental configurations, and model implementation details are
described within the manuscript. Additional materials may be made available from the
corresponding author upon reasonable request.
ACKNOWLEDGMENTS
The author acknowOpen asset ↗Kaggle · new-plant-diseases-datasetpdf-raw-page:24 lines:1-23Dataset · publicgmented) and PlantVillage
datasets. The datasets contain publicly accessible RGB images of healthy and diseased
plant leaves used for supervised image classification research.
DATASET SOURCES
Kaggle New Plant Diseases Dataset (Augmented):
https://www.kaggle.com/datasets/vipoooool/new-plant-diseases-dataset
PlantVillage Dataset: https://plantvillage.psu.edu/All processed data, experimental configurations, and model implementation details are
described within the manuscript. Additional materials may be made available from the
corresponding author upon reasonable request.
ACKNOWLEDGMENTS
The author acknowledges Istanbul Aydin University for academic support and research
guidance duringOpen asset ↗PlantVillagepdf-raw-page:24 lines:1-23Code / dataset availability confirmedCrossref · checked 15 Sept 2026
Precision agriculture is becoming more and more of a challenge that requires the use of intelligent systems that are able to predict stress and prevent yield loss before it is too late. Traditional methods of agricultural surveillance are predominantly reactive with irrigation demands being based on thresholds or individual yield forecasts models that do not represent the intricate spatio-temporal interactions that exist between crop physiology, soil status, and environmental stresses. Besides, the majority of the current practices do not have an autonomous decision-making approach to preventive intervention which leads to inefficient use of water and slows down the response to stress. This paper suggests a cognitive UAV-assisted agro-surveillance system to predict yield vulnerability caused by crop stress and optimize adaptive irrigation with the help of spatio-temporal deep and reinforcement learning. The framework combines UAV-obtained RGB and multispectral and thermal imagery with measurements of soil sensors and meteorological data obtained with the Crop Health and Environmental Stress Dataset. A new GeoSpatio-TRiNet model is used to acquire long-range spatial relationship, time stress development, and diffusion of stresses across agricultural regions. The model predicts the vulnerability trajectories of the stress instead of the direct yield regression, and this allows early detection of yield risk. Such predictions serve to generate a cognitive environmental state of a Soft ActorCritic (SAC) reinforcement learning agent that autonomously computes zone-based irrigation behaviors to reduce the recurrence of stress at the minimum water usage cost. As shown by the results of the experiment, the proposed framework has a stress forecasting accuracy of 96.3% and performs much better than the traditional machine learning, CNN-based, and transformer-based baselines. The system also decreases the predicted yield vulnerability by 46.6 and enhances water-use efficiency by 41.1 as compared to irrigation strategies based on rules. The results confirm the usefulness of spatio-temporal intelligence with predictive control in terms of effectiveness, and the proposed framework is a scalable and sustainable solution to precision agriculture of the next generation.
Why it matches plant phenotyping methodsUAV画像とセンサーデータから作物ストレスの時系列状態および収量脆弱性を推定する計算・センシング手法が研究の中心であり、灌漑制御への応用も技術評価の一部として記述されている。
abstractThe framework combines UAV-obtained RGB and multispectral and thermal imagery with measurements of soil sensors and meteorological data
Reproduction assets foundThe paper uses the public Kaggle Crop Health and Environmental Stress Dataset (UAV RGB/multispectral/thermal imagery plus soil/weather measurements and stress labels) as its phenotyping data source, and the authors provide an explicit public GitHub repository for the analysis code.Dataset · publicThe current research is based on the Crop Health and Environmental Stress Dataset, which is a publicly available
dataset on Kaggle, specially created to help perform a spatio-temporal analysis of crop health in response to changing
environmental and water-stress factors [26].Open asset ↗pdf-raw-page:10 lines:1-62Code · publicturn: Final zone-wise stress predictions 𝐶
𝑡
𝑧, Yield vulnerability trajectories 𝑉𝑡
𝑧, Optimal adaptive irrigation policy
𝜋∗
End Algorithm
Code availability:
The data used to support the findings of this study are included in the article.
Code availability:
The code used in this research work is available in the following link.
https://github.com/replyvenugopal/Cognitive-UAV-Driven-Agro-Surveillance
4. Result and Discussion
The architectural agro-surveillance solution, which is proposed to be executed by UAVs, is executed through a
modular and scalable software framework to guarantee reproducibility and extensibility. The experiments are all
performed in Python as a main programming languageOpen asset ↗github.com/replyvenugopal/Cognitive-UAV-Driven-Agro-Surveillancepdf-raw-page:24 lines:1-55Code / dataset availability confirmedOpenAlex · arXiv · checked 5 Sept 2026
High-throughput phenotyping depends on accurate 3D reconstruction of plants across growth stages, yet the development and evaluation of temporal completion methods are limited by the lack of datasets with complete geometric ground truth. To address this challenge, we introduce SynthCrop4D, a procedurally generated synthetic dataset of temporally evolving plant point clouds that provides controllable noise, occlusion, and complete plant geometry for benchmarking reconstruction methods. Using this dataset, we evaluate a two-stage pipeline that combines spatial denoising and temporal point cloud completion. First, a denoising module removes structural artifacts from raw laser-scanned point clouds. The resulting data are then processed by an Adaptive Temporal PoinTr model that reconstructs the current growth stage (t) using information from the previous stage (t-1), enabling recovery of regions missing due to self-occlusion. We evaluate the proposed framework on both SynthCrop4D and the real-world Pheno4D dataset (tomato and maize) under settings with and without denoising. Results show that denoising substantially improves reconstruction quality, with the best configuration achieving a Chamfer Distance of 0.0061 on SynthCrop4D (Temporal PoinTr + Mamba-DG) and an F-Score of 0.2080 on Pheno4D (Vanilla PoinTr + Mamba-DG). We further demonstrate the use of completed point clouds for phenotypic trait extraction, including plant height, canopy width, and convex hull volume, obtaining hull-volume MAEs of 0.021 on synthetic data and 0.343 on real data. Together, SynthCrop4D and the proposed pipeline provide a benchmark and methodology for temporal plant reconstruction and high-throughput crop phenotyping.
Why it matches plant phenotyping methods植物の3D点群再構成・時系列補完を開発し、合成データセットと実データで性能検証するとともに、草丈・群落幅・凸包体積を抽出する手法を中心に扱っている。
abstractwe introduce SynthCrop4D, a procedurally generated synthetic dataset of temporally evolving plant point clouds that provides controllable noise, occlusion, and complete plant geometry for benchmarking reconstruction methods.
Reproduction assets foundThe paper's authors explicitly state that source code, implementation details, and pre-trained model weights are publicly available on GitHub, and that the paper-specific SynthCrop4D synthetic dataset can be reproduced via scripts in that codebase. Pheno4D is a cited prior public dataset, not a paper-specific asset.Code · publicThe source code, implementation details, and pre-trained model weights for this study are publicly available on GitHub at https://github.com/Mrudul2006/3d_plant-reconstruction .Open asset ↗Mrudul2006/3d_plant-reconstructionlines:1724-1761Plant phenotyping relevance match · UnverifiedEurope PMC · OpenAlex · checked 15 Sept 2026
Alfalfa / lucerneX-ray / CTRoot2D/3D reconstructionVisualization / data managementGrowth / development / phenology
The symbiotic relationship between the legume Medicago sativa and the soil bacteria Sinorhizobium meliloti results in the formation of nitrogen-fixing root nodules. Traditional destructive methods, including paraffin sectioning, vibratome sectioning, and cryosectioning, have been applied to visualize how bacteria occupy the nodule, making it extremely difficult to obtain reliable three-dimensional information. These approaches are often combined with fluorescent labeling or staining, which can introduce additional stress affecting plant growth and nodule formation. MicroCT has emerged as a relatively quick, easy, and robust tool for plant biology that can non-destructively visualize plant histological features in three dimensions (3D), thereby avoiding destructive artifacts during sample preparation and ensuring high-fidelity 3D reconstruction. While microCT has been applied to legume root nodules, a detailed established protocol that documents the process from plant harvest and sample preparation to scanning and software visualization is lacking. In this study, we show a step-by-step microCT workflow using Medicago sativa as a model. The protocol includes nodule excision from roots, fixation, contrast enhancement, mounting, scanning, and three-dimensional reconstruction. Critical parameters affecting elements such as image quality, tissue preservation, and contrast are highlighted. Using this approach, it is possible to visualize the overall tissue organization, bacteroid-infected cells, and vascular bundles in three dimensions without physically sectioning the nodules. The pipeline described here provides a reproducible method for non-destructive, high-resolution imaging of native root nodules and is likely adaptable to other legume species, offering researchers a practical tool for studying nodule structure and bacterial organization within nodules in 3D.
Why it matches plant phenotyping methods根粒の組織構造と感染細胞を3Dで取得するMicroCT撮像・再構成プロトコルが研究の中心であり、植物器官の形態状態を測定する実質的なフェノタイピング手法である。
abstractIn this study, we show a step-by-step microCT workflow using Medicago sativa as a model.
Plant phenotyping relevance match · UnverifiedOpenAlex · Europe PMC · Crossref · bioRxiv · checked 5 Sept 2026
Abstract Non-invasive, high-throughput phenotyping tools are needed that can identify environmental effects on plant structure and function to diagnose factors responsible for reduced growth in commercial and non-commercial settings. In this study, we explored whether the integration of 3D-multispectral (3D) and 2D-hyperspectral imaging (HSI), aided by machine learning (ML), could be used to identify environmental stress treatments imposed during plant growth. Controlled environment-grown Nicotiana Benthamiana plants were subjected to a range of abiotic treatments – including different growth irradiances, heat treatment and drought stress – with the treatments resulting in differences in shoot height, biomass, leaf area and spectral reflectance. ML models were trained to identify these treatments using morphological and spectral traits measured at 27, 29, 31, and 34 days after sowing (DAS). A 3D-multispectral scanner was used to obtain information on plant height, biomass, and leaf area. A visible and near-infrared (VNIR) HSI camera provided detailed spectral information for deriving spectral indices including the Normalised Difference Vegetation Index (NDVI), Photochemical Reflectance Index (PRI) and Normalized Difference Red Edge (NDRE). Manual measurements provided baseline comparative data. The 3D-multispectral scanner reliably estimated above-ground traits, with high correlations between manual and scanner-derived measurements. The ML models accurately differentiated among environmental stress treatments, with the fused 3D+HSI model achieving the best overall predictive performance across all evaluated metrics compared with models based on either imaging modality alone. Results demonstrated the effectiveness of combining 3D-multispectral and 2D-HSI data with ML analyses for non-destructive, high-throughput phenotyping. The integration of these techniques enabled non-destructive, high-throughput identification of environmental stress treatments imposed during plant growth.
Why it matches plant phenotyping methods3Dマルチスペクトル画像・ハイパースペクトル画像と機械学習を統合し、植物形態・スペクトル形質を非破壊かつ高スループットに取得・検証する方法が研究の中心である。
abstractNon-invasive, high-throughput phenotyping tools are needed that can identify environmental effects on plant structure and function
Existing conversational plant-phenotyping platforms are difficult for plant scientists to use and lack the reliability scientific research demands: failed analyses are reported as valid measurements rather than flagged as missing, statistical tests run without checking assumptions, predictions carry no uncertainty estimate, and specialised hardware limits accessibility. We present PhenoIntel, a lifecycle-aligned multi-agent web platform that turns the full machine-learning workflow into a reliable, user-friendly phenotyping system. Nine specialised agents divide the analysis into stages, from image collection through model selection, inference, and reporting, rather than handing the whole task to one AI manager. Independent checks separate these stages, and every agent reads from and writes to one shared, fixed-structure record, so an inconsistent output from one stage is caught before it reaches the next. Uncertainty is matched to each model family, conformal prediction, detection-confidence spread, or Monte Carlo Dropout, rather than applied uniformly, and quality thresholds adapt to crop and task instead of one global cutoff. When no suitable model exists, PhenoIntel can propose, validate, and integrate a new one on its own. The model repository spans ten trained models across five crops and four imaging modalities. Classification models reach Macro F1 of 0.78-0.996; object-detection models reach 0.96 mAP@50 with a 54% reduction in counting error over an unoptimised baseline; and a temporal model reaches held-out Macro F1 of 0.7050. PhenoIntel runs in a browser on standard hardware, requiring no GPU, and a 1,200-test automated suite confirms complete pipeline execution. Every result carries calibrated uncertainty, validated statistics, and FAIR-compliant provenance, a combination existing conversational phenotyping tools do not offer.
Why it matches plant phenotyping methods植物フェノタイピングの画像収集から推論・報告までを扱うウェブプラットフォームを開発し、複数モデル、精度、不確実性、検証スイートを評価しており、方法が研究の中心である。
abstractWe present PhenoIntel, a lifecycle-aligned multi-agent web platform that turns the full machine-learning workflow into a reliable, user-friendly phenotyping system.
Reproduction assets found論文固有の解析コードとモデル資産を公開するGitHubリポジトリを本文中の根拠とともに確認しました。Code · publiccode, model checkpoints, and the 1,200-test automated suite referenced
throughout this paper are maintained in a version-controlled
repository, available at
https://github.com/Naren1704/PhenoIntel-InternshipOpen asset ↗Naren1704/PhenoIntel-Internshiplines:2047-2163Plant phenotyping relevance match · UnverifiedCrossref · checked 15 Sept 2026
Agricultural production faces significant annual losses due to plant diseases, with economic impacts exceeding 40 million dollars and contributing to acute hunger affecting over 281.6 million people in 2023. The timely and accurate identification of plant diseases through leaf image analysis is crucial to mitigate these losses and ensure global food security. This study proposes a lightweight Convolutional Neural Network model, inspired by the MobileNet architecture, designed to classify various plant leaf diseases efficiently. Leveraging a publicly available dataset, this research focuses on developing a model that balances high performance with computational efficiency, making it suitable for real-world applications in resource-constrained environments. The proposed model, named LDPNet, achieved an outstanding accuracy of 99.62%, alongside precision, recall, F1-Score, and AUC metrics of 99.16%, 99.08%, 99.11%, and 99.99%, respectively. A comprehensive comparative analysis was conducted against MobileNetV2 and a reference model from previous research, highlighting the superior performance of LDPNet in terms of both accuracy and efficiency. The results demonstrate that the proposed architecture not only maintains high classification performance but also significantly reduces the number of parameters, making it a practical and scalable solution for plant disease identification. This study contributes to the growing field of agricultural technology by providing a robust, lightweight, and efficient tool for early disease detection, with the potential to enhance crop management and reduce economic losses in agriculture.
Why it matches plant phenotyping methods葉画像から植物病害を分類する軽量CNNを開発し、性能・効率を比較評価しており、植物の病害状態を取得する方法が研究の中心である。
abstractThis study proposes a lightweight Convolutional Neural Network model, inspired by the MobileNet architecture, designed to classify various plant leaf diseases efficiently.
Abstract Background and aims Plant volatile organic compounds (VOCs) change dynamically with plant development and in response to environmental conditions. However, their potential as non-invasive indicators of phenological progression remains poorly explored. In this study, we developed a framework integrating automated VOC sampling, time-resolved VOC profiling, and machine-learning analysis for the non-invasive assessment of plant phenology. Using soybean ( Glycine max (L.) Merr.), we investigated whether development-associated temporal variation in VOC emissions could delineate and predict developmental phases. Methods We collected VOCs daily under controlled environmental conditions from 16 to 43 days after sowing, spanning the transition from vegetative to reproductive stages, using an automated sampling system coupled with thermal desorption-gas chromatograph-mass spectrometer (TD- GC-MS). To characterise temporal changes in VOC profiles associated with phenological progression, we analysed the daily VOC data using a multi-step pipeline combining statistical filtering and similarity-based network analysis. We defined VOC-derived developmental phases from similarity patterns in the VOC profiles, then developed and evaluated machine-learning models to predict these phases. Key results Seven VOCs exhibited distinct phase-dependent dynamics, including green leaf volatiles and monoterpenes showing characteristic temporal changes during phenological progression. Network-based clustering of VOC profiles resolved five developmental phases closely aligned with conventional developmental stages. A machine-learning model predicted these phases from the VOC profiles with high predictive accuracy on independent test data, demonstrating that phenological progression could be quantitatively inferred from VOC emission patterns. Conclusions Our findings support VOC profiling as a reliable and non-invasive approach for assessing phenological progression in soybean. By extracting temporally structured VOC signals, this framework captures developmental information that may be difficult to obtain through visual observation alone, particularly after canopy closure. VOC profiling offers a practical tool for monitoring crop developmental dynamics and has broader potential for plant phenotyping and precision crop management.
Why it matches plant phenotyping methods自動VOCサンプリング、時系列VOCプロファイリング、機械学習を統合し、VOCから植物の発育段階を非破壊推定する方法を開発・評価しており、フェノタイピング手法が中心である。
abstractwe developed a framework integrating automated VOC sampling, time-resolved VOC profiling, and machine-learning analysis for the non-invasive assessment of plant phenology.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Supplement · publicThe peak area matrix obtained from the MS- DIAL analysis (Supplementary Dataset S1) was filtered to remove unreliable features.Open asset ↗lines:66-69Plant phenotyping relevance match · UnverifiedOpenAlex · checked 5 Sept 2026
Introduction Leaf shape is a genetically determined crop phenotype, and its accurate classification underpins soybean germplasm assessment and genetic improvement. Manual classification is highly subjective and struggles to distinguish morphologically similar leaves, while mainstream supervised classification demands large labeled datasets and incurs high development costs. Efficient feature frameworks for soybean leaf categorization are still insufficient. Methods In this study, 581 biologically replicated terminal leaflets sampled from 194 soybean varieties were analyzed at the single-leaflet level using traditional morphological indices and novel leaf contour angular features. Unsupervised K-means clustering was used to classify soybean leaflet morphological phenotypes; t-SNE was applied exclusively for dimensional reduction visualization, while Welch's ANOVA combined with Games-Howell post-hoc tests was adopted to detect inter-cluster phenotypic differences. Clustering stability and external consistency against manual visual labeling were further quantified via Adjusted Rand Index to comprehensively verify the reliability of grouping outputs. Results The results revealed no significant difference in leaflet edge complexity (p = 0.41) between two manually divided leaf groups distinguished by overall leaf outline similarity; these two morphologically similar leaf clusters failed to be fully separated even though the first two principal components accounted for 90.2% of total variance. For K-means clustering, k = 3 achieved better overall performance with a Calinski–Harabasz (CH) index of 395.55, Davies–Bouldin (DB) index of 1.03, and silhouette coefficient (SC) of 0.38, compared with k = 4. Nevertheless, the angular feature attained an F-value of 951.62 in driving sample reallocation across clusters, serving as the core indicator for fine subdivision at k = 4. Under k = 4 clustering, all six morphological indices differed significantly among the four groups (p < 0.05). Additionally, the number of cross-clustered samples increased from 66 to 119 as k rose from 3 to 4, with 96.6% of cross-clustering attributed to the leaflet contour angular feature. Discussion This research provides a novel reference and technical support for the automated identification and fine classification of soybean leaf morphology.
Why it matches plant phenotyping methods大豆小葉の形態表現型を角度特徴量とクラスタリングで自動分類する手法が研究の中心であり、検証指標も明示されているため。
abstractLeaf shape is a genetically determined crop phenotype, and its accurate classification underpins soybean germplasm assessment and genetic improvement.
Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · checked 14 Sept 2026
Raman / spectroscopyObject detectionPhysiological trait estimationWater status / transpiration
ABSTRACT Real‐time, accurate water monitoring is a crucial technical foundation for industrial, environmental, and biological research. However, traditional detection methods typically include destructive processes and suffer from response delays. Near‐infrared (NIR) luminescent metal halides offer a novel solution to this challenge, but they still face issues such as ultraviolet excitation and low photoelectric conversion efficiency. Herein, a luminescent material was synthesized based on the blue‐light‐excited lead‐free perovskite Cs 2 HfCl 6 :Te 4+ /Mo 4+ , in which energy transfer (ET) from Te 4+ to Mo 4+ enables highly efficient NIR luminescence in the 800–1200 nm wavelength range. Upon encapsulation with a commercial blue light chip, the fabricated NIR light‐emitting diode device achieved a photoelectric conversion efficiency of up to 16.1%. By utilizing the absorption characteristics of water molecules in the NIR spectrum and receiving signals via a sensor, an interactive learning process based on a neural network machine learning algorithm was employed, achieving an estimation accuracy of up to 98.6% for plant water content. This non‐destructive and precise NIR detection module provides a new solution for the real‐time monitoring of crop physiological status and holds broad application prospects in the fields of precision agriculture and plant science.
Why it matches plant phenotyping methods植物の含水量を非破壊・リアルタイムに推定するNIRセンシングモジュールと機械学習手法が研究の中心であり、植物生理状態の測定法を開発・検証している。
abstractBy utilizing the absorption characteristics of water molecules in the NIR spectrum and receiving signals via a sensor, an interactive learning process based on a neural network machine learning algorithm was employed, achieving an estimation accuracy of up to 98.6% for plant water content.
The increasing world population necessitates new sustainable nutrient sources, making microalgae like Chlorella sorokiniana interesting due to its rich nutrient profile and sustainable cultivation methods. With genetic optimization tools like CRISPR/Cas9, microalgae as a nutrient source can be improved even further. However, degradation of the rigid cell wall of microalgae, and thereby developing protoplasts, is often necessary prior to transformation, but monitoring protoplast development in spherical, single-celled organisms like C. sorokiniana is challenging using bright-field microscopy. Carbotrace 480 and 630 were tested as fluorescent markers of the cell wall of a C. sorokiniana mutant for protoplast detection, and Carbotrace 480 was successfully used to distinguish protoplast from normal cells in a cell suspension. The enzymes Driselase, Glucanex, Snailase, and Saczyme were tested in different combinations to degrade the cell wall of the mutant, with Snailase as the most effective yielding ~60 % protoplasts. This study provides a quick and easy tool for monitoring protoplast development in the microalgae C. sorokiniana, the first step to improve C. sorokiniana as a sustainable nutrient source using genetic optimization tools like CRISPR/Cas9.
Why it matches plant phenotyping methods微細藻類の細胞壁状態とプロトプラスト形成を蛍光マーカーで識別する方法の開発・検証が研究の中心であり、植物状態の取得手法に該当する。
abstractCarbotrace 480 and 630 were tested as fluorescent markers of the cell wall of a C. sorokiniana mutant for protoplast detection, and Carbotrace 480 was successfully used to distinguish protoplast from normal cells in a cell suspension.
Main conclusion We established a protocol for reliable nuclear visualization in Charophyceae, revealed diverse nuclear organization across cell types and species, and identified suitable cells for genome size estimation via flow cytometry. Charophyceae are multicellular green algae closely related to land plants and are established model systems for understanding plant evolution. Yet key cellular parameters like genome size remain poorly characterized. We combined fluorescence microscopy, transmission electron microscopy (TEM), and flow cytometry to characterize nuclear diversity across cell types and species of Characeae and to identify a cell type suitable for genome size estimation. Among three DNA-intercalating fluorochromes, propidium iodide labeled nuclei most reliably. Nuclear morphology varied widely across cell types: mononucleated cells were found in vegetative apical cells, the coronula of oogonia, and spermatogenous filaments of antheridia, whereas multinucleation predominated in other tissues, e.g., cortical cells, spine cells, stipulodes and rhizoids. Nuclei in Chara hispida showed a significant gradient in cross-sectional area along the thallus axis. In the apical internodes, nuclei were larger and more heterogeneous, whereas in the basal internodes they were smaller and more uniform, which is consistent with possible endopolyploidy. TEM confirmed the nuclear identity of crescent-shaped structures. Relatively large nuclei were found in rhizoids and spine cells. Only Sphaerochara canadensis showed an organized nuclei pattern. Whole-thallus preparations did not yield a defined nuclear peak by flow cytometry, but antheridia of Chara tomentosa produced a sharp peak, from which a genome size of 5.32 pg (1C) was estimated. The protocol established here provides a simple, reproducible framework for visualizing nuclei and estimating genome size in Charophyceae, and helps address longstanding questions in this group, such as the mechanisms and functions of multinucleation, the site of meiosis, and genome evolution.
Why it matches plant phenotyping methodsシャジクモ類の核可視化とゲノムサイズ推定のための再現可能なプロトコルを開発・検証しており、表現型取得法が研究の中心である。
abstractWe established a protocol for reliable nuclear visualization in Charophyceae
Faba bean yield reflects complex relationships among genotype, environment, and agronomic traits. This study evaluated an explainable Tabular Prior-data Fitted Network (TabPFN) framework for estimating plot-mean single-plant yield and prioritizing traits using 398 plot-level observations, 13 measured agronomic predictors, and six derived features. On the reference 80/20 split, TabPFN achieved the best values for all four test metrics (R2 = 0.8746, RMSE = 1.9132 g plant−1, MAE = 1.0819 g plant−1, and MAPE = 8.16%). The Friedman test detected differences among the six models (χ2(5) = 16.75, p = 0.005); Nemenyi comparisons distinguished TabPFN from HistGradientBoosting and SVR, whereas the Holm-corrected Wilcoxon analysis confirmed only the TabPFN–SVR difference. Across 10 repeated 80/20 splits, TabPFN obtained the highest mean test R2 (0.8614 ± 0.0691), ranked first in eight splits, and produced a higher R2 than every tuned baseline in at least eight splits. SHAP, permutation importance, and LOCO analyses emphasized pod-, seed-, and biomass-related predictors. Repeated-split ablation showed that derived features improved TabPFN consistently, whereas removing selected target-proximal yield variables reduced performance for every model. The framework is therefore a harvest-time trait-estimation and trait-prioritization tool rather than an early-season forecasting system. Notably, TabPFN achieved this performance without the 100-trial Optuna search used for each baseline; only n_estimators was screened over four prespecified values.
Why it matches plant phenotyping methods単一個体収量を推定し、形質優先順位付けを行う機械学習フレームワークを評価・比較しており、植物形質抽出手法が研究の中心である。
abstractThis study evaluated an explainable Tabular Prior-data Fitted Network (TabPFN) framework for estimating plot-mean single-plant yield and prioritizing traits
Barley ( Hordeum vulgare L.) is a major cereal crop whose soluble dietary fiber (SDF) offers significant health benefits, yet conventional SDF determination methods are time-consuming, labor-intensive, and destructive to samples. This study developed a rapid, non-destructive method for SDF quantification in barley using mid-infrared (MIR) spectroscopy combined with a Boruta-based partial least squares (PLS) hybrid approach. A total of 280 barley grain samples were subjected to Fourier-transform infrared (FTIR) spectral acquisition from 2000 to 650 cm -1 , with reference SDF values determined by the association of official analytical chemists (AOAC) 991.43 enzymatic-gravimetric method. The Boruta algorithm selected 165 informative wavenumbers out of 363, reducing the variable space by 54.5%. The developed Boruta-PLS model achieved excellent predictive performance with a coefficient of determination for the training set ( R 2 C ) of 0.9695 and for the test set ( R 2 P ) of 0.9601 and a root mean squared error for the training set (RMSE C ) of 0.7464%, and for the test set (RMSE P ) of 0.7340%, substantially outperforming the full-spectrum PLS model with an R 2 P of 0.7759 and an RMSE P of 1.7387%, as well as conventional wavelength selection methods including variable importance in projection (VIP), competitive adaptive reweighted sampling (CARS), and uninformative variable elimination (UVE). The selected wavenumbers were predominantly located in chemically relevant regions at 1000-1200 cm -1 and 1500-1700 cm -1 , confirming model interpretability. This Boruta-PLS approach provides a rapid, non-destructive, and cost-effective alternative for SDF quantification, with strong potential for high-throughput screening and real-time quality monitoring of barley samples.
Why it matches plant phenotyping methods大麦種子の可溶性食物繊維という種子形質を、MIR分光とBoruta-PLSで非破壊・高速推定する手法の開発と性能比較が研究の中心であり、単なる生物学的実験のルーチン測定ではない。
abstractThis study developed a rapid, non-destructive method for SDF quantification in barley using mid-infrared (MIR) spectroscopy combined with a Boruta-based partial least squares (PLS) hybrid approach.
In the process of agricultural intelligence, precise detection of plant organs serves as the foundation for core tasks such as crop phenotyping analysis and yield prediction. However, in complex field environments, small targets such as citrus flowers and shoots face challenges including scale variation, background interference, and dense occlusion, which severely impact detection accuracy. This study improves the YOLOv10 model by introducing the BAM (Bottleneck Attention Module) attention mechanism and GIoU (Generalized Intersection over Union) loss function, constructing a YOLOv10s-BAM-GIoU model suitable for citrus flower, fruit, and shoot recognition. The BAM attention mechanism enhances the model's feature extraction capability for small target organs under complex backgrounds through parallel channel and spatial attention branches; the GIoU loss function improves the localization accuracy of densely occluded targets by optimizing the geometric alignment between predicted and ground-truth boxes. Validation experiments were conducted on a self-constructed dataset. The experimental results show that the improved YOLOv10s achieves significant advantages in comprehensive detection accuracy, with an mAP50 of 89.1%, representing an improvement of 2.9%~9.5% over the original YOLOv10s and other comparative models. In fine-grained category detection, the model achieves mAP50 of 91.2%, 83.6%, and 92.5% for shoots, flowers, and fruits, respectively. Furthermore, while maintaining high detection accuracy, the model achieves a detection speed of 23.6 ms per frame, meeting real-time detection requirements. The research results demonstrate that the improved YOLOv10s model integrating the BAM attention mechanism and GIoU loss function achieves an optimal balance between accuracy and speed in citrus organ detection tasks, providing a preferred solution for field real-time detection systems.
Why it matches plant phenotyping methods柑橘の花・果実・シュートという植物器官を画像から検出する改良モデルを開発し、データセットで精度と速度を検証しており、表現型取得手法が中心である。
abstractThis study improves the YOLOv10 model by introducing the BAM (Bottleneck Attention Module) attention mechanism and GIoU (Generalized Intersection over Union) loss function, constructing a YOLOv10s-BAM-GIoU model suitable for citrus flower, fruit, and shoot recognition.
Abstract Purpose Rapid and non-destructive detection of pigment and nutrient traits in tomato ( Solanum lycopersicum L.) leaves is essential for precision fertilization and greenhouse management. However, most existing studies focus on individual traits (e.g., chlorophyll or nitrogen) with isolated models, limiting the establishment of robust analytical workflows across growth stages and cultivation conditions. This study systematically evaluated hyperspectral imaging workflows for estimating pigment and nutrient traits in tomato leaves. Methods Hyperspectral images were collected at the stages of flowering-fruiting, ripening and harvest from tomato plants supplied with nitrogen at 0, 210, 300 and 390 kg N ha⁻¹. Total contents of chlorophyll, total nitrogen and nitrate were measured by standard biochemical assays for model calibration and validation. Result After sample partition with four strategies, seven spectral preprocessing methods were evaluated, namely moving average (MA), Savitzky-Golay smoothing (SG), Gaussian filtering (GF), median filtering (MF), normalization, baseline correction and standard normal variate (SNV), with normalization, MA and SNV yielded the best predictive performance for chlorophyll, total nitrogen and nitrate, respectively. For feature wavelength selection, competitive adaptive reweighted sampling (CARS) and successive projections algorithm (SPA) were used with CARS yielding the best performance for total chlorophyll and nitrate prediction, while SPA was optimal for total nitrogen prediction. By application of the above optimal methods, random forest (RF), support vector machine (SVM), eXtreme Gradient Boosting (XGBoost) and convolutional neural network (CNN) models were developed to predict pigment and nutrient indicators. Conclusion The SVM performed best for chlorophyll ( R c ²=0.823, R p ²=0.431) prediction, while the CNN achieved higher accuracy for total nitrogen ( R c ²=0.826, R p ²=0.780) and nitrate ( R c ²=0.851, R p ²=0.753) prediction. Overall, leaf nitrogen-related traits were predicted more reliably than total chlorophyll, for which validation performance remained limited. Impact These findings demonstrate that sample partitioning, spectral preprocessing, wavelength selection and model selection should be optimized for each target trait rather than applied uniformly. This study provides a methodological basis for non-destructive assessment of tomato leaf N status and precision fertilization management.
Why it matches plant phenotyping methodsトマト葉の色素・養分形質を対象に、ハイパースペクトル画像処理、波長選択、機械学習モデルを体系的に比較・検証しており、植物形質取得手法が研究の中心である。
abstractThis study systematically evaluated hyperspectral imaging workflows for estimating pigment and nutrient traits in tomato leaves.
While most phenotyping platforms rely primarily on image-based measurements, advanced plant characterization requires the integration of active physiological sensing modali- ties such as chlorophyll fluorescence. We present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves. The system combines 3D plant reconstruction, geometric analysis, and motion planning to localize suitable measurement points and generate collision-free trajectories for a robotic manipulator. A dense 3D model of the plant is reconstructed from multi-view data and used to extract candidate leaf surfaces based on orientation, accessibility, and sensing constraints. These targets are then integrated into a task-level planning framework that guides the end-effector to precise contact or near-contact configurations required for point-based fluorescence acquisition. The platform enables automated, repeatable, and spatially resolved physiological measurements that go beyond passive imaging. By tightly coupling perception, geometric reasoning, and manipulation, the proposed system provides a robotics-driven approach to high-resolution plant phenotyping and opens new directions for autonomous agricultural inspection and plant-aware manipulation.
Why it matches plant phenotyping methods植物葉の蛍光を自律ロボットで空間的・反復的に取得するプラットフォームを開発しており、植物表現型の取得手法が研究の中心です。
abstractWe present an autonomous robotic platform designed to perform targeted fluorescence measurements on plant leaves.
Reproduction assets foundThe paper states its code is publicly available in the authors' SonyCSLParis GitHub repository (Plant3DImager), which implements the phenotyping perception and motion-planning pipeline. The exact full URL is split across a line break in the supplied text, so the verifiable allowed URL prefix is used.Code · public2 The code is available at https://github.com/SonyCSLParis/ 3 See for example at https://www.youtube.com/watch?v=Open asset ↗SonyCSLParis/pdf-page:4 lines:1-61Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Abstract Technological advances have expanded the adoption of digital technologies in agriculture, helping to reduce labour effort, increase profitability, improve crop efficiency and productivity, enhance product quality, mitigate environmental impacts, and promote human health. This context also extends to soybean farming, a sector of major economic importance in Brazil. Most importantly, Brazil has the global leadership in soybean production with biological nitrogen fixation (BNF) replacing chemical fertilisers. The research and evaluation of BNF is limited by manual counting of nodules, a time-consuming procedure. This study presents SoyNodules, designed for the automatic identification of soybean nodules, consisting of a dataset of images. The dataset includes 1,701 images acquired under controlled conditions: 1,662 images of soybean roots with nodules and 39 images of isolated nodules without roots. A total of 49,210 nodule instances are manually annotated with bounding boxes. SoyNodules was designed to promote reuse and interoperability in alignment with the FAIR principles (Findable, Accessible, Interoperable, Reusable) and to support the development, training, and evaluation of computer vision and deep learning methods for precision agriculture.
Why it matches plant phenotyping methods大豆根粒を自動識別する画像データセットであり、手作業計数の代替となる植物器官形質の抽出・評価を支援する方法論的データセット。
abstractThis study presents SoyNodules, designed for the automatic identification of soybean nodules, consisting of a dataset of images.
Reproduction assets foundThe paper is a data descriptor for SoyNodules, an annotated dataset of 1,701 soybean root/nodule images with 49,210 bounding-box annotations, publicly deposited on Zenodo with a DOI. The same repository also hosts the authors' annotation-format conversion script (AnyLabeling to Pascal VOC/COCO), per the Code AvailabilDataset · publicThe SoyNodules dataset, released as version 1.0, is publicly available on Zenodo [28]
at https://doi.org/10.5281/zenodo.22081914.Open asset ↗Zenodo · 10.5281/zenodo.22081914pdf-page:9 lines:1-43Plant phenotyping relevance match · UnverifiedOpenAlex · checked 11 Sept 2026
Accurate quantification of rice aboveground biomass (AGB) is critical for crop monitoring but remains challenging due to the complex nonlinearity arising from the coupling of plant density, spatial structure, and internal dry matter distribution. To address the limitations of single-source remote sensing, this study proposed a Three-Dimensional Dry Matter Distribution Integration (3D-DMI) model, which establishes a physically interpretable framework decomposing AGB into dry matter density ( ρ ), horizontal projection distribution ( S ), and vertical cumulative distribution ( h d ) components. Guided by this framework, a core subset of six features (Red_650, MTCI, G_correlation, R_correlation, LPI, and HPA0_99) was extracted from UAV-based multispectral, RGB, and LiDAR data using a dual-step feature selection approach combining Maximum Information Coefficient (MIC) and Distance Correlation (dCor). A Random Forest (RF) regression model was then developed to estimate AGB across the entire growth season. The results demonstrated that the 3D-DMI model achieved excellent performance with an R 2 of 0.920, an RMSE of 0.184 kg/m², and an RPD of 3.544, significantly outperforming any single-sensor approach. Single-feature analysis revealed that while LiDAR-derived structural features provided the fundamental basis for biomass estimation, they encountered inherent saturation bottlenecks during late growth stages. Feature contribution analysis based on SHAP further quantified that LiDAR-derived features dominated the estimation process (68.5% contribution), providing the volumetric basis, whereas RGB textures (18.3%) and multispectral features (13.3%) provided indispensable supplements. Ultimately, this study established a robust, physically grounded computational paradigm for high-precision UAV-based rice biomass monitoring across the entire growth cycle.
Why it matches plant phenotyping methodsUAVマルチスペクトル・RGB・LiDARデータからイネの地上部バイオマスを推定する3D-DMI計算手法を開発・評価しており、植物形質の取得・抽出が研究の中心である。
abstractthis study proposed a Three-Dimensional Dry Matter Distribution Integration (3D-DMI) model
Abstract The integration of digital technologies for high-throughput field phenotyping is critical for accelerating crop improvement in agriculture. However, extracting traits from remote sensing data remains constrained by fragmented workflows, manual intervention, and limited interoperability among existing tools, resulting in delays that hinder timely biological insight and decision-making. To address these challenges, we present PhenoStream (Phenotyping Streaming), a scalable, end-to-end cyberinfrastructure designed to automate the full lifecycle of aerial imagery-based phenotyping, from data acquisition to plot- and genotype-level inference. The framework integrates automated data ingestion from distributed field sites, geospatial processing, and AI-enabled trait extraction within a unified, user-accessible graphical interface. Its modular and extensible architecture supports adaptable trait modeling and seamless integration of new data sources, enabling deployment across diverse crops, environments, and experimental designs. We demonstrate the system across a large multi-location field trial network of bioenergy crops, where it enables high-throughput characterization of spatiotemporal growth dynamics, genotype-by-environment (G×E) interactions, and predictive modeling of key agronomic traits. By significantly reducing processing latency and manual effort, the platform facilitates near-real-time analysis and reproducible workflows. This work establishes a generalizable and scalable pathway for operationalizing very-high-spatial resolution aerial phenotyping in agricultural research. By bridging data acquisition and analytics, the end-to-end cyberinfrastructure provides a foundation for integrating heterogeneous and unstructured data streams-including remote sensing, environmental, and management data - toward data-driven decision making in agriculture.
Why it matches plant phenotyping methods植物の航空画像から形質を自動抽出するエンドツーエンドのフェノタイピング基盤を開発・実証しており、形質取得ワークフローとプラットフォームが研究の中心である。
abstracta scalable, end-to-end cyberinfrastructure designed to automate the full lifecycle of aerial imagery-based phenotyping, from data acquisition to plot- and genotype-level inference.
Chlorophyll fluorescence provides sensitive information on plant photochemical responses, but its measurement requirements can limit high-throughput application. This study investigated whether RGB imagery could approximate chlorophyll-fluorescence-derived photochemical status across garden plant species during progressive soil drying. A Photochemical Status Index (PSI) was constructed by principal component analysis from five highly correlated JIP-test energy-flux variables (RC/CS, ABS/CS, TRo/CS, ET2o/CS, and RE1o/CS). The dataset comprised 50 aggregated species-by-soil-moisture-stage observations representing ten species and five sequential soil-moisture stages. Eleven RGB-derived variables were evaluated, and a partial least-squares regression model was assessed using nested leave-one-species-out validation, with all data-dependent procedures repeated within each outer training fold. PC1 explained 96.5% of the shared variation among the fluorescence-derived fluxes. The predictors g, GLI, ExG, ExGR, and CIVE were retained in all ten outer folds. The final model yielded a pooled out-of-fold R2 of 0.469, an RMSE of 1.585, and an MAE of 1.183. However, species-specific R2 ranged from −0.179 to 0.959, and a calibration slope of 0.509 indicated prediction-range compression. These findings provide proof-of-concept evidence of moderate RGB-based approximation of fluorescence-derived photochemical status, but inconsistent species transferability and the common soil-moisture/time gradient require external validation before practical deployment.
Why it matches plant phenotyping methodsRGB画像から蛍光由来の植物光化学状態を推定する手法を構築し、種間交差検証で性能評価しており、植物フェノタイピング手法が中心である。
abstractThis study investigated whether RGB imagery could approximate chlorophyll-fluorescence-derived photochemical status across garden plant species during progressive soil drying.
Agricultural operations such as pepper harvesting, fruit counting, and field phenotyping rely on accurate visual recognition and instance segmentation algorithms. However, pepper fruits in complex field environments often exhibit slender and curved shapes, partial occlusion, ambiguous boundaries, and adhesion between adjacent instances. Existing object detection and instance segmentation methods therefore struggle to obtain complete fruit masks, which adversely affects subsequent fruit counting, contour measurement, and picking-point localization. To improve the instance segmentation accuracy of occluded peppers in complex field scenes, this study proposes OccPepSeg-YOLO, an improved model based on YOLO11n-seg. First, a P2FreqFusion module is introduced to fuse shallow, high-resolution detail features with deep semantic features, thereby enhancing the representation of fruit edges and tip regions. Second, an ASC module is designed to model the directional and scale-related morphological characteristics of pepper fruits, while a BoundaryGate module strengthens responses at occlusion interfaces and boundaries between adjacent instances. Finally, an OccPepSegment multi-scale prototype segmentation head is constructed, and a BDoU loss function is introduced to improve the boundary consistency of instance masks. Experiments on a self-constructed field-pepper instance segmentation dataset showed that OccPepSeg-YOLO achieved M-P, M-R, M-mAP50, and M-mAP50–95 values of 93.87%, 92.09%, 97.17%, and 82.31%, respectively, representing improvements of 5.59, 3.18, 3.83, and 9.52 percentage points over YOLO11n-seg. Further comparisons with representative YOLO-based instance segmentation models, including YOLOv8n-seg, YOLOv9c-seg, YOLO12n-seg, and YOLOv26n-seg, demonstrated that OccPepSeg-YOLO achieved the best overall segmentation performance. In particular, its M-mAP50–95 exceeded the best competing result obtained by YOLOv9c-seg by 8.35 percentage points. Under a unified repeated-inference protocol on an RTX 3090 GPU using FP32 precision, a batch size of 1, and 640 × 640 inputs, OccPepSeg-YOLO achieved a mean inference latency of 15.801 ± 1.238 ms, a P95 latency of 17.323 ms, and a throughput of 63.29 FPS. These results demonstrate that the proposed model can produce more complete pepper instance masks under leaf occlusion, fruit overlap, and complex background conditions, providing technical support for field-pepper recognition, fruit counting, and visual perception by agricultural robots.
Why it matches plant phenotyping methods圃場画像からピーマン果実のインスタンスマスクを抽出する手法を開発・比較検証しており、果実カウントや輪郭計測に利用可能な植物形質取得が中心である。
abstractAgricultural operations such as pepper harvesting, fruit counting, and field phenotyping rely on accurate visual recognition and instance segmentation algorithms.
High-resolution monitoring of forest structure and productivity is essential for effective natural resource management. However, monitoring approaches such as field-based forest inventories or extensive lidar campaigns are costly, time-intensive, and spatially limited. Therefore, inexpensive and accessible methods are needed. SatCHM (Satellite Canopy Height Model) was developed to be an accessible and open-source tool for researchers, allowing for site-specific and temporally flexible predictions of canopy height with limited computational resources. SatCHM requires four inputs: panchromatic satellite imagery, solar and sensor angle metadata of satellite imagery, digital elevation models (DEMs), and lidar-produced CHMs for an area of interest. After SatCHM pre-processes inputs, data is loaded into a collection of convolutional neural networks (CNNs) for image-to-image regression. This ensemble cooperates to yield high-resolution predictions (up to 0.5-meter) of three-dimensional tree structure with discernible tree crowns across a broader defined area of interest. After calculating the mean absolute error for each prediction output, the median of these mean absolute errors was 6.06 meters.
Why it matches plant phenotyping methods森林キャノピー高と樹冠構造という植物形質を衛星画像等から推定するオープンソース手法を開発し、CNNによる推定と誤差評価まで行っており、植物フェノタイピング手法が研究の中心である。
abstractSatCHM (Satellite Canopy Height Model) was developed to be an accessible and open-source tool for researchers, allowing for site-specific and temporally flexible predictions of canopy height with limited computational resources.
ABSTRACT Leaf shape is a fundamental trait of plant ecological strategies, influencing biotic interactions and ecosystem functioning. However, established quantitative metrics fail to capture subtle variations and irregularities, require user-based reference points or are challenging to compare among taxa with broadly different leaf shapes. In addition, established metrics typically conflate (aggregate) leaf edge complexity and macro-shape complexity, despite their independent functional significance and genetic foundations. Here, we introduce an entropy-based framework to quantify two new complexity metrics: edge complexity and macro-shape complexity. Based on three case studies, we show that these metrics outperform aggregate metrics in predicting Quercus robur chemical traits, provide more intuitive interspecific classifications, and strongly align with human perception. In addition, edge and macro-shape complexity show high complementarity, while aggregate metrics are highly redundant and typically strongly related to leaf area. Emerging as the strongest predictor of leaf chemistry and key visual cue for complexity as perceived by humans, the effects of edge complexity highlight the under-appreciated functional significance of leaf margins. Our framework and the proposed entropy-based complexity metrics thus promise to help unlock the potential of growing digital image archives of leaves, including images from herbaria and fossils, and are technically readily applicable to shapes of algae, bacteria, pollen, and beyond. The accompanying package ShapeComplexity enables the broad application of entropy-based metrics, providing a powerful tool to explore how the shape of organisms and biological structures influences ecological strategies, biotic interactions, and ecosystem functioning while tracking spatial and temporal variation.
Why it matches plant phenotyping methods葉の画像からエッジ複雑性とマクロ形状複雑性を定量化する新規指標とソフトウェアを開発しており、植物形質抽出法が研究の中心である。
abstractHere, we introduce an entropy-based framework to quantify two new complexity metrics: edge complexity and macro-shape complexity.
Reproduction assets foundThe paper's authors publicly release their ShapeComplexity analysis code (Rust) on GitHub, used to compute the paper's leaf edge- and macro-shape complexity metrics. Supplementary data/analysis code are on Dryad, but that URL is not in the allowed list. RMBG is a generic third-party background-removal model, not a phenCode · publicThe complete, open-source Rust-code (The Rust Team, 2025 ) is publicly available on GitHub ( https://github.com/Thornbach/ShapeComplexity ), ensuring transparency and reproducibilityOpen asset ↗Thornbach/ShapeComplexitylines:86-94Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Emerged Technologies include imparted potentiality to generate adequate food to converge ultimatum of society. However, aspects like, climate change, plant disease, refuse at pollinators as well as others are demanding to farmers. The presence of diseases pulls up the maturation of their corresponding species. Plant disease recognition using image processing and machine learning (ML) with data collected from Internet of Thing (IoT) sensors has been receiving greater amount of interest in recent years, however timely disease detection remains a demanding issues. Despite early disease detection though reduces the risk of destruction to plants nevertheless the noise present in the sensor networks (i.e. Internet of Things) while collecting internet scrapped images compromise overall precision and accuracy. To address on this research gap, i.e., addressing noise with timely disease detection, in this work ML based plant disease detection method called, Intersection Histogram and Rotational Invariant Principal Component Regression (IH-RIPCR) is introduced. IH-RIPCR technique is dividing as pre-processing and feature extraction. First with the raw plant dataset obtained as input from Corn or Maize Leaf Disease Dataset, pre-processing is done employing Intersection Histogram based Contrast Enhancement model. Second with the obtained pre-processed contrast enhanced images is subjected as input to ML-based Rotational Invariance Principal Component Regression feature extraction model to extract relevant features pertaining to corn or maize leaf images for disease detection in an accurate and precise manner. Experiments are conducted with corn or maize plant leaf dataset with different existing methods to verify hypothesis potentiality of IH-RIPCR technique. Significance of technique is evaluated based on numerous parameters in terms of PSNR, processing time, precision, recall and accuracy respectively.
Why it matches plant phenotyping methodsトウモロコシ葉の病徴を画像から検出する画像処理・機械学習手法を開発し、既存法との比較評価を行っており、植物病害状態の表現型取得が中心です。
abstractin this work ML based plant disease detection method called, Intersection Histogram and Rotational Invariant Principal Component Regression (IH-RIPCR) is introduced.
Plant phenotyping relevance match · UnverifiedOpenAlex · Europe PMC · checked 14 Sept 2026
Structural failure of cereal stems during late-season climate extremes is a critical determinant of yield stability. In barley, breakage of the stem below the spike, known as head loss, leads to major yield losses, particularly in hot and dry regions where the crop is widely grown. Despite a predicted increase in head loss risk due to global warming, current understanding of the genetic, physiological, anatomical, and environmental factors that control head loss remains limited. Overcoming these knowledge gaps is essential to providing a systems-level strategy for barley breeders to develop climate-ready cultivars that are resilient to stem breakage and suitable for industry adoption. Here, we review present knowledge and highlight opportunities for innovation to mitigate head loss through interdisciplinary approaches that combine precise phenotyping through mechanical testing of stem strength and flexibility, high-throughput phenotyping through drone-based spike counting, and genetic modification strategies informed by studies on hormonal regulation and cell wall composition. Coupled with genotypic data, these efforts will enable the development of a genomic selection platform to facilitate future breeding programs. The framework and tools discussed here are broadly applicable to improving stem resilience in other cereal crops.
Why it matches plant phenotyping methods茎の強度・柔軟性や穂数を対象とする表現型計測手法をレビューし、機械試験とドローンによる高スループット計測を育種基盤として論じているため、表現型手法が中心的です。
abstractHere, we review present knowledge and highlight opportunities for innovation to mitigate head loss through interdisciplinary approaches that combine precise phenotyping through mechanical testing of stem strength and flexibility, high-throughput phenotyping through drone-based spike counting
Adventitious root formation is critical for the cost-effective propagation of grapevine rootstocks, and poor rooting limits the adoption of new rootstocks derived from underutilized Vitis L. species. We evaluated 308 accessions representing 18 Vitis species over three growing seasons, scoring rooting at two developmental stages, callus-stage and post-transplant, together with root biomass, cutting weight, and a derived transplant- response index. Phenotypic variation was extensive within and among species, and species rankings depended on the trait considered: V. riparia , V. rupestris and V. californica ranked among the top five species for all four rooting traits, whereas V. arizonica and V. acerifolia rooted well at the callus stage but only intermediately after transplanting. Repeatability was moderate to high for root weight and callusstage rooting and lower for post-transplant rooting. Between-species differences accounted for most of the genetic variance in callus-stage rooting but little of that in cutting weight. After removing differences among species, accessions originating from wild sites with lower dry-season precipitation rooted better and produced more root biomass. Genome-wide association analysis of 3.4 million single-nucleotide polymorphisms identified 54 significant markers resolving into 18 independent loci across four traits. Candidate genes implicate auxin-linked cell proliferation, cell wall and lignin remodeling, and solute transport. Genomic and phenomic prediction achieved moderate accuracies across traits and seasons, including for previously unevaluated accessions, and combining spectral with genotypic data improved performance; accuracy was essentially flat between 5,000 and 50,000 markers. These results provide a framework for broadening the germplasm base of grapevine rootstock breeding. Plain Language Summary Grapevines are almost always grown as two plants joined together: a fruiting variety grafted onto a rootstock that supplies the root system. Nurseries build these plants from dormant cuttings, so a rootstock is only useful in practice if its cuttings root easily. Almost all commercial rootstocks descend from just three wild North American grape species, in part because cuttings of other species are believed to root poorly. We grew cuttings from 308 wild and cultivated grapevines representing 18 species over three years and measured how well each one rooted, first in the callusing room and again after the young plants were transplanted. Rooting ability varied a great deal, and several species outside the usual three rooted as well as the standards. Vines originally collected from places with drier summers tended to root best. We also located regions of the grape genome linked to rooting, and showed that the rooting ability of a vine can be predicted from its DNA or from light reflected by its leaves. Together, these results give breeders a way to screen a much wider range of wild grapevines for rootstock development before testing them in a nursery. Core Ideas Rooting ability varies widely across 18 Vitis species, well beyond the three used in rootstock breeding. Callus-stage and post-transplant rooting behave as genetically distinct stages of root formation. Accessions from collection sites with drier summers rooted better and produced more root biomass. GWAS resolved 18 loci implicating auxin signaling, cell wall remodeling, and solute transport. Genomic and phenomic prediction reached moderate accuracy and was insensitive to marker density.
Why it matches plant phenotyping methods発根形質を対象に、スペクトル情報を用いたフェノミック予測を実施し、遺伝子型情報との統合や予測精度を評価しているため、形質取得・推定手法が研究の主要な技術的要素です。
abstractGenomic and phenomic prediction achieved moderate accuracies across traits and seasons, including for previously unevaluated accessions, and combining spectral with genotypic data improved performance
The intrinsic properties of plants offer numerous opportunities for scientific and technological advancement. Considerable efforts have been directed toward developing plant-on-chip platforms to investigate cellular responses to external stimuli, including chemical, mechanical, and electrical cues. In this study, we present a fluidic platform using polydimethylsiloxane (PDMS) and a printed circuit board (PCB), integrated with electrochemical impedance spectroscopy (EIS) detection. Various experimental conditions were examined, including ionic and pH stimulation, as well as membrane dimensions, with the onion inner membrane treated as a black-box system. The measurement results are presented as Nyquist plots, and a resistance model incorporating multifactorial influences is proposed. Impedance variations in plant cells serve as a basis for electrical modulation. To explore these properties, we converted acoustic signals into electrical inputs and recorded the outputs after being modulated by onion inner epidermal cells. A transfer function analysis was subsequently performed. Our results indicate that the plant cell-on-chip (PCOC) platform holds promise for further investigations into plant cell properties. The impedance results suggest that plant cells can respond to different external stimuli, enabling modulation of the electrical properties. These findings lay the groundwork for future studies on cellular electrical characteristics and the development of preliminary bioelectrical circuits.
Why it matches plant phenotyping methods植物細胞の電気的生理状態を測定・解析するEISベースのオンチップ基盤を開発しており、植物状態の取得方法が研究の中心である。
abstractwe present a fluidic platform using polydimethylsiloxane (PDMS) and a printed circuit board (PCB), integrated with electrochemical impedance spectroscopy (EIS) detection
Maize diseases affecting leaves, stalks, and ears can substantially reduce yield and quality; therefore, rapid and accurate recognition in complex field environments is important for intelligent agricultural monitoring. To address the large-scale variation, weak fine-grained texture, and strong background interference associated with multi-part maize diseases, this study proposes YOLOv11-MPD (YOLOv11 for Maize Multi-Part Disease Detection), a maize disease detection algorithm based on YOLOv11n. The method jointly improves spatial position awareness, shallow detail preservation, local-context modeling, key semantic-region enhancement, and lightweight detection-head reconstruction. RFCAConv, C3k2_RFCAConv, and Detect_LSDECD are introduced into the baseline network to strengthen directional texture modeling, multi-scale feature aggregation, and detection-head feature representation. FG-RFCAConv, HGD-C3k2, LCA-C3k2, and GRN-BiAttn are further designed for high-frequency differential gated detail compensation, P3 high-resolution detail enhancement, local-context fusion, and global-response-normalized attention regulation, respectively. Experimental results show that YOLOv11-MPD achieves Precision, Recall, mAP50, and mAP50-95 of 72.3%, 72.8%, 79.5%, and 50.2%, improving YOLOv11n by 2.4, 2.5, 2.9, and 2.4 percentage points, respectively, while reducing parameters from 2.6 M to 2.4 M. These results indicate that, within the scope of the dataset used in this study, YOLOv11-MPD improves multi-part maize disease detection under complex field conditions. However, the current conclusions are limited to the constructed dataset, and further validation using larger multi-region, multi-season, and multi-device datasets is required to evaluate its broader generalization ability.
Why it matches plant phenotyping methodsトウモロコシの葉・茎・穂における病害状態を画像から検出するアルゴリズムを開発し、性能比較・検証しており、植物表現型取得が研究の中心です。
abstractthis study proposes YOLOv11-MPD (YOLOv11 for Maize Multi-Part Disease Detection), a maize disease detection algorithm based on YOLOv11n.
Plant phenotyping relevance match · UnverifiedbioRxiv · Europe PMC · OpenAlex · checked 13 Sept 2026
Lodging in sorghum presents a significant challenge for plant breeders due to the trade-off between lodging resistance and grain yield. Manually measuring lodging across thousands of plots is time-consuming, expensive, and error-prone, making selection for lodging resistance challenging in breeding programs. Unmanned aerial vehicle (UAV)-derived metrics provide a potential high-throughput alternative; however, it remains unclear whether photogrammetric heights derived from UAV imagery can estimate plot-level lodging severity in large sorghum breeding trials. This study developed a framework for predicting plot-level lodging from UAV imagery across 2,675 sorghum breeding plots. Multi-temporal canopy height data were collected at two critical time points: maximum crop height and at manual lodging assessment. Height percentiles were extracted from UAV-derived point clouds generated using photogrammetric algorithms. These data were used to develop parametric, non-parametric, and ensemble prediction models, which were evaluated using three statistical metrics. The ensemble model, averaging predictions from all models, achieved the highest accuracy with Pearson correlations of r = 0.80-0.84 and lowest root mean square error (RMSE=16-18%), explaining 64-70% of variation in manual lodging counts. Model diagnostics and iterative refinement, including inspection of UAV imagery and dataset curation, had minimal impact on model performance, demonstrating the robustness of the approach. Model performance was consistent across sites, with minimal effects of stratified sampling on accuracy, confirming the ensemble approach as optimal for plot-level lodging assessment. This study demonstrates that integrated multi-temporal UAV imagery offers a practical alternative to labor-intensive manual evaluation methods by enabling high-throughput lodging assessment suitable for implementation in sorghum breeding programs.
Why it matches plant phenotyping methodsUAV画像と写真測量点群からソルガム区画の倒伏程度を推定する取得・解析フレームワークを開発し、実データで精度評価しており、植物表現型測定法が研究の中心である。
abstractThis study developed a framework for predicting plot-level lodging from UAV imagery across 2,675 sorghum breeding plots.
Field / plotLiDAR / point cloudRootMorphology / geometry measurementRoot system architecture
Coarse root systems govern tree anchorage, yet remain among the least documented components of tree architecture: excavation is irreversible, and established 3D methods rely on specialist scanners and lengthy post-processing. We evaluated whether a consumer smartphone records exposed coarse root architecture metrically, and which traits agree most closely with manual measurement. Four fully exposed Scots pine (Pinus sylvestris L.) root systems in northwestern Poland were scanned with an iPhone 17 Pro running Scaniverse, at about 30 min of acquisition and 5 h of processing per tree. Clouds were registered, cleaned and oriented to magnetic north in CloudCompare; of eight architectural metrics, four were validated against manual references at 95 cross-sections on 44 roots, and four were exploratory. Visible root length (root-mean-square error, RMSE, 22.2 cm, 8.4%), azimuth (RMSE 3.58°, mean absolute error 2.47°) and depth (RMSE 3.18 cm, 14.9%) agreed most closely with the reference; 70 of 77 first-order roots were detected with no false positives. Diameter was the weakest metric and the only one dependent on the operator (RMSE 0.46 and 0.29 cm for two operators on the same clouds). Smartphone LiDAR thus turns an irreversible excavation into a permanent, measurable record of the traits relevant to anchorage, provided that centimetre-level diameters are not required.
Why it matches plant phenotyping methodsスマートフォンLiDARによる露出根系の3D形態計測ワークフローを開発・検証し、手動測定と複数の根系形質を比較しているため、植物フェノタイピング手法が中心である。
abstractWe evaluated whether a consumer smartphone records exposed coarse root architecture metrically, and which traits agree most closely with manual measurement.
Abstract Deep convolutional networks now classify leaf images on curated benchmarks such as PlantVillage with accuracies close to the measurement ceiling of those datasets, which has shifted the open questions away from raw accuracy toward two under-reported issues: which components of a composite pipeline actually cause the result, and whether the components that matter on laboratory images are the same ones that matter on field photographs. We address both with a classification framework evaluated under a protocol that fixes every development decision before the independent test data are read. A Mask R-CNN stage localizes the dominant leaf, the accepted box is expanded by a validation-selected 5% margin and resized to a shared 224 by 224 input, and the same localized image is passed to ResNet50, InceptionV3, and MobileNetV2 together with an extractor that produces eighteen colour and shape descriptors. The forty-five class probabilities and eighteen descriptors form a sixty-three-dimensional input to a neural meta-classifier developed by three repetitions of stratified five-fold cross-validation. On a locked 3,101-image PlantVillage test partition of fifteen classes the framework reached 99.77% accuracy and 99.75% macro F1 with seven misclassifications, and a one-component-at-a-time ablation confirmed that every stage contributed. The same design was then trained and evaluated entirely within a separate thirteen-class PlantDoc field-image dataset, where it reached 90.03% accuracy and 89.40% macro F1. This is a within-PlantDoc experiment and not a controlled-to-field transfer test, so the figure measures how the pipeline behaves on field imagery rather than how a PlantVillage-trained model survives a domain shift. The central finding comes from running the identical ablation on both datasets: on clean images the ensemble breadth and descriptors provide the incremental gains, but under field conditions the ordering changes, and leaf localization and learned fusion become the decisive components. Removing localization cost 2.83 accuracy points and replacing the neural fusion with soft voting cost a further 2.08 points, the two largest effects on PlantDoc. The contribution is a controlled and transparent account of where each component of a localization-aware plant disease classifier earns its place, and of how that ordering shifts between laboratory and field acquisition.
Why it matches plant phenotyping methods葉画像から植物病害状態を推定する分類パイプラインの開発・アブレーション検証が中心であり、単なる病害実験や routine measurement ではない。
titleA Localization-Aware Heterogeneous CNN Ensemble with Neural Meta- Fusion for Plant Disease Classification, with a Component Analysis on Laboratory and Field Images
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Dataset · publicThe classification subset used here (20,638 images spanning fifteen pepper-bell, potato, and tomato classes) was obtained from PlantVillage, which is openly accessible at https://www.kaggle.com/datasets/emmarex/plantdisease.Open asset ↗Kaggle · emmarex/plantdiseaselines:314-336Plant phenotyping relevance match · UnverifiedCrossref · checked 5 Sept 2026
Introduction Accurate estimation of aboveground biomass (AGB) is essential for monitoring pasture productivity and supporting sustainable management of integrated crop–livestock (ICL) systems. We hypothesized that integrating multispectral, thermal, and canopy-structural information derived from unmanned aerial vehicles (UAVs) would improve AGB prediction relative to spectral information alone, and that Generalized Additive Models for Location, Scale and Shape (GAMLSS) would accommodate seasonal heteroscedasticity while maintaining predictive performance comparable to Random Forest (RF) and Support Vector Machine (SVM) models. Methods We collected 280 destructive biomass samples from two ICL paddocks and one continuously grazed pasture in the Brazilian Cerrado between 2022 and 2024. Twenty-four UAV-derived predictors, including spectral bands, vegetation indices, canopy surface temperature, and canopy height, were evaluated using repeated five-fold cross-validation. Model transferability was assessed by withholding one management paddock at a time. Results and discussion Under repeated five-fold cross-validation, GAMLSS achieved the lowest prediction error (R² = 0.69 ± 0.01; RMSE = 2.15 ± 0.04 Mg ha⁻¹), followed closely by SVM (R² = 0.68 ± 0.01; RMSE = 2.19 ± 0.03 Mg ha -1 ); RF showed lower accuracy (R 2 = 0.53 ± 0.01; RMSE = 2.63 ± 0.02 Mg ha -1 ). In the paddock-transferability assessment, GAMLSS also showed the lowest error (R 2 = 0.63 ± 0.04; RMSE = 2.34 ± 0.26 Mg ha -1 ). For GAMLSS, the complete multisensor configuration reduced RMSE by 6.2% compared with the spectral-only configuration. The selected model was used to generate spatially explicit maps of AGB and standing aboveground biomass carbon, estimated from the mean measured carbon concentration of forage biomass. Integrating multispectral, thermal, and structural UAV data with distributional regression improves AGB estimation and enables spatial monitoring of tropical pastures under contrasting management conditions.
Why it matches plant phenotyping methodsUAVのマルチセンサーデータと統計モデルを用いて牧草の地上部バイオマスを推定し、交差検証と圃場間移 transferability 評価を行っており、植物形質の取得・推定手法が研究の中心である。
titleUAV multisensor data and GAMLSS improve forage biomass estimation in Cerrado integrated crop–livestock pastures
Biomolecular condensates that persist through cell division must be reorganized and inherited, yet it remains unclear whether subtle defects before division are associated with later organelle or growth phenotypes. We examined the Chlamydomonas reinhardtii pyrenoid, a liquid-like condensate that concentrates ribulose-1,5-bisphosphate carboxylase/oxygenase (Rubisco), the photosynthetic CO2-fixing enzyme. As part of the algal CO2-concentrating mechanism, the pyrenoid raises CO2 availability around Rubisco. We generated an RBCS1-mGold Rubisco reporter and developed an unsupervised image-analysis pipeline combining a convolutional autoencoder and a one-class support vector machine. Using 4,905 wild-type single-cell images, augmented 22-fold to 107,910 image instances, we defined the range of normal pyrenoid morphology. A combined machine-learning and visual screen of approximately 21,000 insertional mutants yielded 17 pyrenoid integrity mutants (pim1-pim17). Differential reconstruction-error maps highlighted local deviations from the wild-type reference, including phenotypes difficult to classify by eye. Four-dimensional live imaging showed defects in matrix dispersal, partitioning of Rubisco-containing foci, or pyrenoid recondensation in multiple pim strains. Growth assays identified broad defects and phenotypes that became more apparent as CO2 supply decreased. Insertion-site mapping nominated candidate loci, including STT7, which encodes a chloroplast kinase best known for regulating photosynthetic light harvesting. Independent STT7-edited lines lacked detectable STT7 accumulation and showed pyrenoid-region reconstruction-error patterns, supporting an association between impaired STT7 function and altered pyrenoid morphology. These findings show that unsupervised image screening can extend forward genetics to subtle pyrenoid phenotypes accompanied by mitotic remodeling or growth defects.
Why it matches plant phenotyping methods藻類細胞のピレノイド形態を対象に、画像解析と教師なし機械学習パイプラインを開発し、正常範囲の定義・変異体スクリーニング・検出性能の実証を行っており、表現型取得手法が研究の中心である。
abstractdeveloped an unsupervised image-analysis pipeline combining a convolutional autoencoder and a one-class support vector machine
Reproduction assets foundThe paper's custom machine-learning analysis scripts (CAE–OC-SVM pyrenoid screening pipeline) are explicitly stated to be publicly available on the authors' GitHub repository. Other data (microscopy files, anomaly scores) are only available upon request, so they do not qualify as public assets.Code · publicCustom scripts used for the machine-learning analyses are publicly available at https://github.com/Yamano-Lab/2025_Machine_Learning-based_screening .Open asset ↗Yamano-Lab/2025_Machine_Learning-based_screeninglines:103-119Plant phenotyping relevance match · UnverifiedCrossref · checked 15 Sept 2026
Field / plotLiDAR / point cloudStem / branchWhole plant / canopy / plot / fieldClassification2D/3D reconstructionSegmentationArchitecture / morphology / geometry
The separation of a forest plot into individual trees and the automatic extraction of their stem structures from terrestrial laser scanning data are complicated by dense stands, occlusions, and the diversity of biomorphological forms. Existing algorithms usually solve scene partitioning, voxel classification, and tree growing as independent tasks, which leads to error accumulation at subsequent processing stages. This paper proposes a unified model for spatial fragmentation and biomorphological forest segmentation comprising three interrelated stages: scene partitioning by estimated stem coordinates using a Voronoi diagram, probabilistic voxel- or point-level classification, and bottom-up tree growing guided by spatial connectivity and stem membership criteria. For the semantic module, tabular, volumetric, and point-based approaches are compared: gradient boosting with layer-by-layer inference, TabNet, a three-dimensional convolutional neural network, PointNet2, and two-stage pipelines in which gradient boosting builds an initial stem mask for subsequent neural segmentation. The experiment was conducted on 567 mixed-species trees. Considering both quality and computational performance, the {CatBoost; CNN3D} pipeline was selected as the preferred solution, achieving AUC = 0.9966 and IoU = 0.9831. The obtained results show that combining interpretable layer-by-layer classification with subsequent spatial analysis improves the quality of stem structure reconstruction, which is important for automatic forest inventory tasks.
Why it matches plant phenotyping methods地上レーザースキャンから個体樹木と幹構造を自動抽出する統合セグメンテーション手法を開発・比較しており、植物形態の取得が研究の中心である。
abstractThe separation of a forest plot into individual trees and the automatic extraction of their stem structures from terrestrial laser scanning data are complicated by dense stands, occlusions, and the diversity of biomorphological forms.
Tomato leaf diseases must be identified early and accurately in order to reduce output loss and advance sustainable agriculture. Deep learning models have shown encouraging results in the identification of plant diseases, but their high processing requirements and inability to adjust to field-specific limitations sometimes make it difficult to implement them in real-world applications. For the purpose of accurately and efficiently classifying tomato leaf diseases, we present a convolutional neural network based on AlexNet that is lightweight and field-aware. Our proposed model is designed with less complexity than traditional architectures and is able to perform inference faster without sacrificing accuracy, making it suitable for real-time implementation in low resource agricultural environments. The algorithm was trained and tested on a dataset of 7704 augmented images of tomato leaves from 7 different disease categories. The Lightweight AlexNet achieved accuracy comparable to VGG variants and outperformed deeper models such as ResNet (96.81%) with lower parameter overhead. It was trained from scratch using TensorFlow & Keras on 100×100 pixel inputs, achieving a training accuracy of 99.15% and a validation accuracy of 99.74%. Moreover, an effective structure of the model enables the installation on edge devices, which offers a scalable precision farming solution. Our work helps to bridge the gap between deep learning research and real-world application in agriculture, allowing the development of real-field, resource-efficient disease detection systems.
Why it matches plant phenotyping methodsトマト葉の病害状態を画像から分類する軽量CNNを開発し、精度・計算量・エッジ実装性を評価しており、植物フェノタイピング手法が研究の中心である。
abstractFor the purpose of accurately and efficiently classifying tomato leaf diseases, we present a convolutional neural network based on AlexNet that is lightweight and field-aware.
Abstract Living tissues contain dynamic biochemical information that is difficult to capture with conventional hyperspectral microscopes because sequential spectral acquisition is poorly matched to in vivo molecular processes that evolve during measurement. Here we introduce a task-specific optical encoding framework for video-rate molecular inference in living plant tissue. The system integrates a passive spectral encoder, implemented here as a low-angle scattering LDPE layer, into a 22-mm miniaturized probe and learns a supervised mapping from ultraviolet-excited autofluorescence measurements to biomolecular abundance maps. Unlike conventional pipelines that first reconstruct hyperspectral datacubes and then perform spectral unmixing, the deployed system directly estimates endogenous molecular contrast associated primarily with lignin and chlorophyll in poplar tissue, with additional suberin-associated contrast evaluated in suberin-rich tissue. This reframing makes the measurement task biomolecular inference rather than spectral reconstruction, enabling biochemical mapping under low-photon autofluorescence conditions while reducing data burden and computational latency. In living poplar stems, the platform captures autofluorescence-derived videos of embolism propagation and wound-induced biochemical remodeling, dynamic processes for which sequential spectral acquisition can introduce temporal mixing because the molecular contrast evolves during the scan itself. The system also resolves genotype-dependent reductions in lignin-associated autofluorescence in engineered poplar lines. Direct molecular inference improves biomolecular estimation relative to a reconstruction-based pipeline, while probabilistic decoding provides uncertainty estimates. These results show that compact passive spectral encoding, when optimized for biological inference rather than datacube recovery, enables deployable, label-free molecular videography of living plant tissue dynamics after task-specific calibration.
Why it matches plant phenotyping methods生体植物組織の生化学的状態を動画取得・推定する光学センシング手法を開発し、校正、比較評価、不確実性推定まで行っており、表現型取得法が中心である。
abstractHere we introduce a task-specific optical encoding framework for video-rate molecular inference in living plant tissue.
Plant diseases can reduce crop quality and productivity, making early detection an important aspect of modern agriculture. Recent advances in deep learning, particularly Convolutional Neural Networks (CNN), have shown promising performance in image-based plant disease classification. This study proposes an explainable deep learning approach for multi-class plant disease classification using ResNet50 and EfficientNetB0 combined with Grad-CAM visualization. The experiments were conducted using the PlantVillage dataset consisting of 15 classes of healthy and diseased plant leaves.The research process included image preprocessing, data augmentation, transfer learning, model training, performance evaluation, and explainability analysis. The dataset was divided into training and validation sets with a ratio of 80:20. Model performance was evaluated using accuracy, loss, confusion matrix, precision, recall, and f1-score metrics. Experimental results showed that ResNet50 achieved the best performance with an accuracy of 92% and a validation loss of 0.19, outperforming EfficientNetB0 which obtained 76% accuracy and 0.82 validation loss. The classification report demonstrated that ResNet50 provided more stable and consistent predictions across most disease classes. Furthermore, Grad-CAM visualization successfully highlighted disease-relevant regions such as lesions, discoloration, and damaged leaf areas, improving the interpretability of the CNN model. The findings indicate that the combination of ResNet50 and Grad-CAM is effective for plant disease classification and provides better explainability for deep learning-based agricultural applications.
Why it matches plant phenotyping methods植物葉の病害状態を画像から分類・可視化する深層学習手法が研究の中心であり、病徴領域の推定も評価しているため、植物フェノタイピング手法として採用。
abstractThis study proposes an explainable deep learning approach for multi-class plant disease classification using ResNet50 and EfficientNetB0 combined with Grad-CAM visualization.
To establish an accurate and interpretable prediction framework for soybean lodging grade and clarify the core regulatory traits and differentiated driving mechanisms of soybean lodging under high-density drip irrigation cultivation, 356 spring soybean germplasm accessions were used as experimental materials in this study. Morphological and mechanical traits including plant height (PH), stem pulling force (SPF), internode number (IN) and petiole length (PL) were measured over two consecutive years of field phenotyping. Two composite evaluation indices, plant height/stem pulling force ratio (PH/SPF) and plant height/internode number ratio (PH/IN), were further constructed. Four machine learning algorithms were adopted to develop multi-classification models for soybean lodging grade prediction. SHAP analysis combined with three global sensitivity approaches (perturbation analysis, Sobol’ method and Morris screening) was applied to decipher the regulatory patterns of key traits. The results showed that lodging grade significantly affected soybean grain yield and explained 25–28% of the phenotypic yield variation; yield reduction tended to plateau under severe lodging. Compared with single indicators such as SPF and PL, the two derived composite indices could stably distinguish soybean accessions with different lodging grades and exhibited stronger discriminatory power. Model comparison revealed that the XGBoost model achieved optimal prediction accuracy and generalization stability for lodging grade, with a weighted F1-score of 95.34% on the test set, significantly outperforming the conventional linear model. Interpretability analysis demonstrated that the PH/IN, PH, and PH/SPF acted as the primary positive traits promoting lodging, while SPF was the sole protective trait. Driving factors of lodging presented obvious gradient heterogeneity: mild lodging was dominated by the imbalance of plant architecture ratio, whereas severe lodging was governed by the cumulative effects of PH and IN. Strong interactions existed among all measured traits. The interpretable machine learning framework established in this study can provide theoretical support and technical references for lodging-resistant germplasm screening and targeted plant architecture regulation for densely planted soybean under drip irrigation systems.
Why it matches plant phenotyping methods大豆の倒伏状態を形態・力学形質から機械学習で推定し、モデル性能比較と解釈性解析を行う枠組みが研究の中心であり、単なる生物学的実験の routine 測定ではない。
abstractTo establish an accurate and interpretable prediction framework for soybean lodging grade and clarify the core regulatory traits and differentiated driving mechanisms of soybean lodging
Herbarium specimens are physical, verifiable records that form the basis of taxonomic knowledge and biodiversity research. Their large-scale digitization has produced extensive collections of high-resolution images and associated specimen metadata, creating conditions in which artificial intelligence (AI) can play an important role in plant taxonomy, collection management, and ecological research. Early AI applications have primarily focused on automated species identification based on individual specimen images. Although increasingly accurate, such approaches remain limited by their emphasis on single-specimen label prediction and by treating identification outputs as final analytical decisions. Recent methodological advances-including segmentation-based preprocessing, automated trait extraction, structured extraction of label data, detection of potentially misidentified specimens, and multimodal integration of visual, textual, and genetic information-extend AI applications beyond species identification toward broader analytical frameworks, encompassing taxonomic interpretation as well as ecological and biodiversity research. In these approaches, specimens are placed within a shared analytical space, and identification results are used to support comparisons across multiple specimens rather than being treated as final decisions for single individuals. This multi-specimen perspective enables quantitative examination of species boundaries, morphological variation, data inconsistencies, and taxonomic stability within curated collections. In this context, AI serves not as an ultimate decision-maker but as a decision-support tool embedded in expert-guided workflows and biodiversity knowledge infrastructures. These developments can be summarized as Integrative Taxonomic AI, an approach that employs learned morphospaces to interpret and refine taxonomic categories by integrating multimodal evidence and curated specimen data under expert guidance.
Why it matches plant phenotyping methods植物標本画像から形態形質を抽出するAI手法と統合的解析枠組みを中心に扱うレビューであり、植物表現型取得・抽出法との関連が明確。
abstractRecent methodological advances-including segmentation-based preprocessing, automated trait extraction, structured extraction of label data, detection of potentially misidentified specimens, and multimodal integration of visual, textual, and genetic information-extend AI applications beyond species identification
Microplastics (MPs) are persistent and ubiquitous contaminants in aquatic ecosystems, yet their interactions with submerged aquatic plants remain poorly understood. While MP-induced phytotoxicity has been extensively investigated in terrestrial plants, quantitative evidence for MP uptake and internal accumulation in submerged species is still limited. In this study, we investigated the phytotoxicity and accumulation patterns of fluorescent microplastics (FMPs) in two submerged aquatic plants, Bacopa lanigera and Rotala indica, using fluorescence spectroscopy. Plants were exposed to FMPs of two particle sizes (50 nm and 1 µm) across three exposure concentrations (0.001%, 0.01%, and 0.05%). Plant growth, chlorophyll content, fluorescence emission, and FMP accumulation were systematically evaluated. Our results demonstrated clear size- and concentration-dependent responses. Smaller particles (50 nm) showed significantly higher uptake and induced stronger phytotoxic effects than 1 µm particles, with pronounced growth inhibition and chlorophyll reduction observed at the highest concentration (0.05%). Fluorescence-based analysis enabled quantitative estimation of both surface-associated and internalized FMPs within plant tissues. Maximum surface accumulation reached 207 ppm, while internal (cross-sectional) accumulation reached up to 75 ppm, regardless of plant species. Under the respective experimental conditions, B. lanigera exhibited higher estimated FMP accumulation, whereas R. indica showed greater growth inhibition. These findings provide quantitative evidence of microplastic uptake and internal accumulation in submerged aquatic plants and highlight particle size as a critical determinant of phytotoxicity. Moreover, this study establishes a fluorescence-based methodological framework for estimating microplastic concentrations in aquatic plant tissues, contributing to improved ecological risk assessment of microplastics in freshwater ecosystems.
Why it matches plant phenotyping methods蛍光分光法による植物組織内マイクロプラスチック蓄積の定量が中心的な技術貢献であり、植物の蓄積状態と毒性関連表現型を評価している。
Abstract Purpose : The system for diagnosing diseases in Solanaceae crops (SolanAPP), including tomatoes, potatoes, peppers, and eggplants, represents a promising tool for supporting decision-making in agricultural fields using AI. This system reconciles the computational intensity of multitasking models with the infrastructural limitations of rural environments, thereby increasing digital literacy. Its architecture is based on two fundamental pillars: (i) autonomous, offline operation for the detection and classification of diseases in Solanaceae crops; (ii) a georeferenced epidemiological surveillance network with agricultural recommendations for crop monitoring. Methods : The core diagnostic process combines crop-specific semantic segmentation and disease classification models exported to TensorFlow Lite, enabling on-device visual inference and pixel-level severity estimation. An optional online layer integrates Groq’s large language model (LLM)-based reasoning and Firebase services to generate structured agronomic explanations and facilitate the creation of georeferenced community reports when a connection is available. Preprocessing and management of the dataset were performed using the Roboflow platform. The mobile app was developed natively in Kotlin. Model performance was rigorously evaluated using accuracy, recall, F1 score, mean IoU, mPA, inference latency, model size, and decision matrix. The optimal model for the crop was selected using Simple Additive Weighting (SAW). Finally, the overall framework quality and usability were evaluated in Cuba through a user validation survey using a 5-point Likert scale and aligned with the ISO/IEC 25010 software quality model. Results : The model that yielded the best results for most crops was DeepLabV3+ with MobileNetV2, which achieved a classification accuracy of over 97\% while operating with lower inference latency. Beyond individual diagnoses, the system incorporates a collaborative georeferencing feature that allows users to share observations and precise geographic coordinates of detected pathologies to facilitate regional epidemiological monitoring. The user satisfaction survey yielded a satisfaction rating of 4.5/5, with users highlighting the importance of offline diagnosis. Conclusion : Plant disease diagnosis using computer vision can support earlier intervention in resource-constrained agricultural settings, but practical deployment requires models that are accurate, lightweight, interpretable, and usable under limited connectivity. SolanAPP, an offline-first Android framework for detecting foliar pathologies in Solanaceae crops, not only establishes a framework for disease identification in complex natural environments but also provides a theoretical and practical foundation for automated agronomic treatment recommendations and community-based crop surveillance. Impact SolanAPP is a free framework that supports the synergy between multitask deep learning for offline disease diagnosis and LLM-driven reasoning for decision-making in the field. Beyond the quantitative metrics obtained from the selected models, the deployment of SolanAPP in rural contexts serves a fundamental socio-technical purpose: it acts as a catalyst for open access, digital literacy, and agronomic decision-making under unfavorable development conditions. It also represents a strong effort to foster a collaborative epidemiological surveillance network in the agricultural sector. Although it faces challenges, such as the use of field images for model training, this framework marks a promising step in the deployment of edge AI, balancing technical accuracy with practical utility.
Why it matches plant phenotyping methods植物病害を画像からセグメンテーションし、病害のピクセル単位の重症度を推定する手法と、オフライン実装・性能評価を中心とした研究であり、植物状態の計測方法が中核です。
abstractThe core diagnostic process combines crop-specific semantic segmentation and disease classification models exported to TensorFlow Lite, enabling on-device visual inference and pixel-level severity estimation.
Abstract Plant diseases represent major constraints on agricultural productivity, often resulting in significant yield losses. This study presents FitoView, a cloud-based mobile decision support system that integrates deep learning with real-time weather forecasting for sustainable plant disease management. Demonstrated through a case study on Cercospora leaf spot in chili pepper, the system employs custom YOLOv8 models for automated disease detection, classification, and pixel-level severity quantification, combined with meteorological data from the OpenMeteo API. The core innovation lies in an integrated decision matrix that considers three dimensions: AI-assessed disease severity, 48-hour climatic risk forecasts, and optimal spraying conditions, generating four contextualized management scenarios with tailored re-evaluation periods (3-10 days). OpenMeteo API validation across four cities in Sergipe demonstrated very strong correlations, with Pearson coefficients (r) of 0.90-0.97 for temperature, 0.81-0.95 for humidity, and 0.92-0.95 for solar radiation, corresponding to R² values of 0.65-0.94. The YOLOv8 object detection model achieved perfect precision (100%) and macro-averaged recall of 89% across all disease classes, with Cercospora leaf spot detection reaching perfect metrics (100% precision, recall, and F1-score). Field validation in Lagarto, Sergipe, confirmed the system’s practical use: it accurately detected Cercospora leaf spot, estimated severity, and, combined with climatic risk, generated recommendations for alternative treatment and short-term re-evaluation. The Progressive Web Application architecture, deployed on a Cloud Platform, ensures accessibility without installation requirements, while the modular design enables scalability to additional crops and diseases, representing a significant advancement toward democratizing AI-powered precision agriculture tools for smallholder farmers in Brazil.
Why it matches plant phenotyping methods植物病害の検出・分類と病斑のピクセルレベル重症度推定をYOLOv8で実装・検証したシステムであり、植物状態の取得・定量化が中心的な技術貢献です。
abstractThe core innovation lies in an integrated decision matrix that considers three dimensions: AI-assessed disease severity, 48-hour climatic risk forecasts, and optimal spraying conditions
Maize ( Zea mays L.) is a highly adaptable crop grown worldwide across diverse climates and management practices, with uses across multiple sectors. Consequently, the traits prioritized in maize research and breeding programs vary depending on the specific objectives. Core traits, however, such as flowering time, plant and ear height, and stalk and root lodging, which are important for evaluating and improving the performance and stability of maize genotypes, are routinely evaluated across breeding programs, regardless of their goals. Standardized measurement of these core traits is essential to ensure data reliability and comparability, enabling the integration of phenotypic data across different experiments. Such efforts ultimately support better decision-making and accelerate the development of improved maize genotypes. This is particularly important in public sector programs, where large-scale evaluations, critical for assessing the value of specific genotypes, are often only feasible through collaboration across programs. Here, we provide a protocol for the standardized collection of phenotypic data, specifically focusing on how to measure core traits in maize field trials. These methods promote consistency and accuracy in the evaluation of these traits, and support communication and coordination among groups in the public sector and other research settings. Further, such standardization facilitates the integration and comparison of data across programs, enabling robust longitudinal and multienvironment analyses.
Why it matches plant phenotyping methodsトウモロコシの主要形質を対象に、圃場試験での表現型データ収集を標準化するプロトコル自体を提示しており、測定方法が研究の中心である。
abstractHere, we provide a protocol for the standardized collection of phenotypic data, specifically focusing on how to measure core traits in maize field trials.
Abstract Ascochyta blight is a widely occurring chickpea fungal disease that can cause severe yield loss. Breeding for crop resistance benefits from high‐throughput evaluation of plant–pathogen interactions in genotypes which can serve as sources of resistance. Current practice for the evaluation is human visual scoring of disease symptoms, which is limited in throughput and precision. Here, we developed open‐source sensor‐based phenotyping methods using red, green, blue (RGB) and multispectral imaging to measure resistance components and predict disease severity classes in chickpea and wild relatives grown outdoors over three seasons. Pots were imaged at multiple time points with a ground‐based platform, providing 86,792 RGB and 8199 multispectral images. Lesion count was estimated with YOLOv5 (You Only Look Once version 5) object detection (F1 score = 0.27–0.30), fractional green canopy cover was estimated from RGB images, and vegetation indices were extracted from multispectral images. A model trained on growth rates of fractional green canopy cover normalized to control genotypes could predict disease severity classes with an accuracy of 65% –81 % ( 0.43–0.59) on unseen data from three different seasons. The developed methods provide a pathway to predict visual disease severity scores and support the breeding of crops for disease resistance. They may also be used to characterize disease progression, to find underlying resistance mechanisms, and for early disease detection.
Why it matches plant phenotyping methodsRGB・マルチスペクトル画像と地上センサープラットフォームを開発し、病斑数、緑色キャノピー被覆率、病害重症度を推定・予測する手法が研究の中心であるため。
abstractHere, we developed open‐source sensor‐based phenotyping methods using red, green, blue (RGB) and multispectral imaging to measure resistance components and predict disease severity classes in chickpea and wild relatives grown outdoors over three seasons.
Abstract This study evaluated the potential of UAV-derived RGB spectral indices to predict fiber quality traits in cotton genotypes. Nineteen genotypes were assessed under a randomized complete block design, and RGB imagery acquired at full flowering was used to calculate GLI, NGRDI, SCId, and SI. Significant genetic variability and moderate-to-high heritability were observed for both fiber traits and spectral indices. GLI was positively associated with the Spinning Consistency Index, whereas NGRDI was associated with fiber length uniformity. Regression models showed moderate predictive ability (R² LOOCV between 32.4–35.4%; and accuracy between 0.57–0.60). GLI and NGRDI demonstrated potential as complementary tools for large-scale phenotyping and preliminary genotype selection, although they do not replace conventional fiber quality analyses. Further studies across additional developmental stages are needed to improve prediction accuracy.
Why it matches plant phenotyping methodsUAV由来RGB画像からスペクトル指標を算出し、ワタの繊維品質形質を予測する手法を評価しており、大規模フェノタイピングへの応用と予測性能の検証が中心である。
abstractThis study evaluated the potential of UAV-derived RGB spectral indices to predict fiber quality traits in cotton genotypes.
The rapid detection and continuous monitoring of crop health and disease outbreaks are critical components of modern precision agriculture, essential for maintaining global food security. Traditional field-based scouting methods, while accurate, are often labor-intensive, time-consuming, and limited by spatial coverage, making them inadequate for large-scale agricultural operations. Remote sensing (RS) technologies—spanning satellite imagery, drone-based aerial platforms, and proximal sensors—offer a powerful, non-destructive, and scalable alternative for capturing high-resolution spectral and temporal data. This paper provides a comprehensive evaluation of current remote sensing applications in crop health monitoring and disease surveillance. We analyze how vegetation indices derived from multispectral and hyperspectral data, such as NDVI and red-edge parameters, serve as sensitive indicators of physiological stress and pathogen infection, often manifesting before visible symptoms appear. Furthermore, we explore the integration of machine learning and artificial intelligence algorithms in automating disease identification and severity mapping. By synthesizing recent advancements in sensor technology and data analytics, this paper demonstrates that remote sensing is indispensable for proactive, site-specific management. The findings emphasize that a multi-scale RS approach—integrating broad-scale satellite monitoring with high-resolution drone sorties—enables farmers to optimize input efficiency, minimize yield losses, and enhance the overall resilience of agro-ecosystems against biotic and abiotic stressors.
Why it matches plant phenotyping methods作物の健康・病害を対象に、リモートセンシング、センサー、植生指数、機械学習による状態・重症度推定を包括的に評価するレビューであり、フェノタイピング手法が中心です。
abstractThis paper provides a comprehensive evaluation of current remote sensing applications in crop health monitoring and disease surveillance.
Plant disease and plant stress early warning systems have advanced through deep learning, remote sensing, digital phenotyping, disease forecasting, and sensor networks. Detection accuracy, precision, recall, F1-score, and area under the curve remain indispensable, but they are insufficient for judging whether a warning can support timely and proportionate phytoprotection under field variability. This Mini Review argues that intelligent plant health warning systems should be evaluated not only as prediction models, but also as safety-relevant decision-support systems embedded in biological, agronomic, and operational contexts. We first relate AI-based detection to established plant disease forecasting and decision-support traditions, including weather-based models, epidemiological forecasting, and integrated disease management. We then adapt selected safety-assurance concepts, including risk assessment, failure mode and effects analysis, Bow-tie reasoning, warning-threshold governance, reliability analysis, resilience thinking, and response closure, to host-pathogen-environment warning chains. The proposed framework links AI or sensor outputs with pathogen biology, host susceptibility, environmental conduciveness, inoculum pressure, uncertainty assessment, risk classification, threshold decisions, human or automated verification, intervention, and feedback learning. Illustrative crop-pathogen scenarios, including wheat rust, rice blast, potato late blight, grapevine downy mildew, and citrus greening, show how safety assurance can complement existing forecasting and decision-support systems rather than replace them. The framework remains conceptual, and whether these added assurance functions improve existing warning systems requires comparative evaluation under field conditions. Future systems should be evaluated through detection performance and response-oriented indicators such as lead time, calibration, false-alert burden, missed-warning rate, response completion, disease suppression, economic value, and learning after field action.
Why it matches plant phenotyping methods植物病害・ストレスの検出を含む知的警戒システムについて、AI・リモートセンシング・デジタルフェノタイピング・センサーネットワークの評価枠組みを体系的に論じる方法論レビューであり、方法論が中心です。
abstractPlant disease and plant stress early warning systems have advanced through deep learning, remote sensing, digital phenotyping, disease forecasting, and sensor networks.
Precision agriculture increasingly requires intelligent systems capable of integrating multimodal sensing with transparent decision support to enable timely and reliable crop management. This study proposes a hybrid intelligent IoT framework integrating environmental monitoring, wearable plant physiological sensing, AI-based pest-monitoring, machine-learning-based prediction of crop physiological stress, and explainable fuzzy rule-based decision support into a unified architecture for crop stress assessment. A novel Physiological Stress Index (PSI) was developed by combining vapor pressure deficit, relative humidity, Delta-T, leaf capacitance, and relative irradiance to provide an interpretable indicator of crop physiological stress. The proposed framework was experimentally validated under real field conditions using a commercial environmental monitoring station, wearable leaf sensors, AI-enabled pest-monitoring devices, and cloud-based analytics. Correlation analysis confirmed strong relationships between PSI and the principal environmental variables (VPD: r = 0.980, Delta-T: r = 0.990, RH: r = −0.961), demonstrating the internal consistency and sensitivity of the proposed index. At the 15 min forecasting horizon, Linear Regression and Gradient Boosting demonstrated virtually identical performance: Gradient Boosting achieved a marginally lower RMSE and higher R2 (RMSE = 0.0273; R2 = 0.9810), whereas Linear Regression achieved a slightly lower MAE (MAE = 0.0186). At the 1 h forecasting horizon, Gradient Boosting achieved the strongest performance (R2 = 0.9034), indicating increasing relevance of nonlinear modelling at longer prediction horizons. The proposed framework demonstrates the feasibility of combining multimodal sensing, machine learning, explainable artificial intelligence, and edge-enabled IoT technologies to support proactive, transparent, and intelligent precision agriculture.
Why it matches plant phenotyping methods植物の生理的ストレス状態を多モーダルセンサーと機械学習で推定する方法を開発し、圃場で検証しており、フェノタイピング手法が中心である。
Abstract Disease management aims to protect crop yield and quality and reduce economic losses caused by plant pathogens. Consequently, reducing disease is a central objective of applied plant pathology. However, what constitutes effective disease control, and how it is measured and analyzed, varies substantially among studies. We conducted a systematic methodological review to characterize how plant disease control has been evaluated in the plant pathology literature over the past 15 years. We searched selected plant pathology journals for articles containing "control" in their titles and used an artificial intelligence-assisted workflow, followed by human verification, to extract and standardize information on experimental settings, disease measurements, measurement scales, and statistical analyses. The final dataset comprised 340 articles representing diverse host-pathogen systems and experimental environments. Disease control was evaluated using a wide range of response variables, most commonly disease severity and incidence, with substantial heterogeneity in measurement scales and sampling practices. Despite this diversity, statistical analysis was remarkably uniform: 79.4% of articles relied exclusively on ANOVA-based approaches. Among studies using ordinal disease scales, 73.3% included ANOVA in the analysis, whereas only 10.6% explicitly reported data transformation. Mean-separation procedures were also common, particularly Tukey, Fisher's LSD, and Duncan's multiple range test; Duncan's test was reported in 20.3% of all articles and varied markedly among journals. Our findings reveal a marked contrast between diversity in how plant disease control is measured and the narrower range of methods used to analyze those measurements. Greater alignment among biological meaning, measurement properties, experimental design, and statistical analysis could improve transparency, comparability, and interpretation in disease-management research.
Why it matches plant phenotyping methods植物病害の重症度・発生率など、植物の病害状態をどのように測定・解析するかを体系的にレビューしており、測定尺度、サンプリング、統計手法の標準化が中心的な方法論的貢献である。
abstractWe conducted a systematic methodological review to characterize how plant disease control has been evaluated in the plant pathology literature over the past 15 years.
Abstract. In the face of escalating global food demand and increasing climate variability, precise and granular crop yield monitoring is indispensable for maintaining regional agricultural stability. However, current deep learning approaches for yield estimation are severely constrained by their heavy reliance on massive in situ labeled data, which limits their application in data-scarce regions. Furthermore, these models often overlook the essential temporal evolution logic of yield formation and lack a systematic discussion regarding the contribution patterns of different feature dimensions, resulting in a black-box nature of the underlying model mechanisms. To address these challenges, this study proposes a field-label-free training framework for maize yield estimation that couples mechanistic model with deep learning. The framework's core strength lies in a physiologically complete simulation database, using the WOFOST model to exhaustively cover 30 years of climate variability and habitat combinations across Northeast China (1.24 × 106 km2). A Gated Recurrent Unit (GRU) network was then introduced for end-to-end modeling, accurately capturing the energy accumulation trajectory from vegetative to reproductive growth. Validation against 458 independent ground points (2022–2024) demonstrated robust generalization with an R2 of 0.69, an RMSE of 1.21 t ha−1, and an RRMSE of 13.73 %, despite using no ground data for training. Our analysis revealed that integrating photosynthetic intensity (LAImean), duration (LAD) and peak features (LAImax) across growth stages is critical for accuracy, while omitting early-stage features significantly impairs the model's ability to capture cumulative growth effects. Furthermore, the model successfully captured the spatiotemporal yield anomalies caused by the 2023 typhoon and flooding events. Ultimately, this study generated a 10 m resolution maize yield dataset (2019–2024) for Northeast China. The dataset exhibits consistent interannual stability, with the RRMSE ranging from 7.98 % to 12.92 % and the R2 remaining above 0.44 at the city level. By deeply coupling mechanistic simulation with data mining, this dataset provides detailed support for optimizing agricultural production and guiding farming practices. The Northeast China Maize Yield 10 m dataset is openly available at https://doi.org/10.5281/zenodo.19547014 (Hu et al., 2026).
Why it matches plant phenotyping methodsトウモロコシ収量という植物・作物群落の形質を推定する計算フレームワークを開発し、独立地点で性能検証したうえで再利用可能な10 m解像度データセットを生成しており、単なる農業実験の routine measurement ではない。
abstractthis study proposes a field-label-free training framework for maize yield estimation that couples mechanistic model with deep learning.
Reproduction assets foundThe paper's core output, the NortheastChinaMaizeYield10m maize yield dataset (2019–2024) with accompanying uncertainty layers, is openly deposited on Zenodo with an explicit availability statement and DOI. No author analysis code or trained model checkpoints are stated as publicly available.Dataset · publicThe Northeast China Maize Yield 10 m dataset is openly available at https://doi.org/10.5281/zenodo.19547014 (Hu et al., 2026).Open asset ↗Zenodo · 10.5281/zenodo.19547014lines:158-191Plant phenotyping relevance match · UnverifiedEurope PMC · checked 14 Sept 2026
Northeast China's Geng rice (Oryza sativa subsp. japonica) dominates the high-value rice markets in China due to its superior eating quality. However, current evaluation methods rely on either labor-intensive, subjective sensory protocols or low-accuracy, calibration-heavy near-infrared spectroscopy (NIRS), constraining breeding for high eating quality and market development. Here, we report a vision-based deep learning framework combining multi-population fine-tuning with industrial vision-language model (VLM) pre-training for Geng rice eating quality prediction. Trained on natural and recombinant inbred (RI) population datasets, our optimal model (Model 4) showed high cross-population stability. It achieved R 2 values of 0.98, 0.57, and 0.61 in a natural population validation set (35 cultivars), an independent DA-RI population (201 lines), and a randomly collected set (30 Northeast and 28 Southern cultivars), respectively, consistently outperforming the widely used Satake STA1B analyzer. Furthermore, our approach enabled the mapping of a novel, robust quantitative trait locus, qIVOE7, for Geng rice eating quality on Chromosome 7. Further analysis suggested that Model 4 appears to rely on the Hue dimension of the HSV color space for its predictions. This framework provides a high-accuracy prediction model and an easy-to-use tool for rice eating quality evaluation, accelerating high-quality rice breeding as well as the development of the high-quality rice market.
Why it matches plant phenotyping methodsコメの食味という植物（種子）形質を画像ベースの深層学習で推定する手法を開発し、複数集団で検証・既存分析器と比較しており、フェノタイピング手法が研究の中心である。
abstractwe report a vision-based deep learning framework combining multi-population fine-tuning with industrial vision-language model (VLM) pre-training for Geng rice eating quality prediction.
Plant diseases destroy 20–40% of global food production annually, posing a critical threat to food security for a projected population of 9.7 billion by 2050. Conventional diagnostic approaches relying on expert visual assessment are slow, costly, and unsuitable for modern agricultural scales. While deep convolutional neural networks demonstrated early promise, single-modality, image-centric systems consistently fail under real-world field conditions characterized by variable lighting, co-occurring infections, and cultivar diversity. This review synthesizes a decade of progress across four interconnected frontiers: the evolution of deep learning architectures for plant disease detection; the adaptation of foundation models including CLIP, SAM, and DINOv2 to agricultural contexts; the development of multimodal fusion frameworks integrating imagery, environmental, genomic, and hyperspectral data; and the transition from static disease diagnosis to descriptive comparison of reported metrics, which suggested that multimodal approaches frequently reported improved diagnostic performance relative to corresponding single-modality baselines, although direct cross-study comparison was limited by methodological heterogeneity. A systematic review following PRISMA guidelines identifies eligible comparative studies. Descriptive comparison of reported performance metrics across these studies indicated that multimodal approaches generally achieved higher accuracy and sensitivity than single-modality models, particularly for pre-symptomatic disease detection. Eight critical research gaps are identified, including the absence of a unified agricultural foundation model and limited climate-aware forecasting under non-stationary climate projections. A structured research agenda is proposed to accelerate translation from laboratory performance to globally equitable, field-deployable crop protection systems.
Why it matches plant phenotyping methods植物病害の画像ベース検出・予測手法を対象とする系統的レビューであり、植物の病徴・病害状態を観測から推定するフェノタイピング手法のレビューとして中心的です。
titleMultimodal Deep Learning and Foundation Models for Early Detection and Forecasting of Plant Diseases
Abstract In modern agriculture, it is essential to identify the early symptoms of plant diseases and to accurately maintain the productivity of the crop and reduce economic losses. Foliar diseases are a special concern in peach because they can cause yield as well as quality if not timely detected. Artificial intelligence, machine learning and deep learning are some of the advanced technologies that are gaining great importance in today's agriculture, especially with the image analysis applications. In this study, a deep learning method for automated detection and classification of three peach leaf diseases and healthy class was presented based on image data. The dataset were taken at different phenological and disease stages under temperate conditions in Kashmir with four classes Healthy, Leaf Curl, Shot hole and Rust. Three convolutional neural networks (CNNs) architectures were applied, VGG-16, ResNet 50 and Xception were trained using transfer learning and Inception-V4 was trained from scratch for a comparative study of the learning strategies. Data augmentation techniques were applied to improve generalization. Results show that all models were able to learn disease specific features well. The result of Inception-V4 was found to be highest with 97.50%, followed by ResNet-50 with 94.49%, VGG-16 with 92.04% and Xception with 75.95%. The results of transfer learning-based architectures were also good and competitive but the best results obtained from the Inception-V4 architecture reveal its capability in modelling complex visual patterns. The results highlight the potential of deep learning techniques for early detection of diseases in peach, supporting precision agriculture and better disease management.
Why it matches plant phenotyping methodsモモ葉の画像から病害症状を自動検出・分類する深層学習手法が研究の中心であり、植物の病害状態を直接推定しているため。
abstracta deep learning method for automated detection and classification of three peach leaf diseases and healthy class was presented based on image data.
Accurate and non-destructive assessment of drought stress is important for improving lettuce production and supporting timely crop management. This study presents a detection-guided deep learning framework for plant-level drought-stress assessment in hydroponically grown lettuce using bird’s-eye-view RGB images. The study further investigates whether canopy segmentation can improve classification performance by reducing irrelevant background information. The framework was evaluated using 2190 images collected across three independent cultivation cycles in which drought stress was induced by isolating the plant root zones from the nutrient solution. In the first stage, YOLO-based object detection was used to localize individual plants, with YOLO26m achieving the highest detection performance of 99.4% mAP@0.5. The detected regions were subsequently used as spatial prompts for zero-shot canopy segmentation using the Segment Anything Model (SAM), with SAM ViT-B achieving a mean IoU of 0.9864. Six convolutional, transformer-based, and hybrid classification architectures were then evaluated independently using YOLO-cropped and SAM-segmented plant images. Segmented inputs consistently improved classification performance, with MaxViT-S achieving the highest binary test accuracy of 96.3%. The framework further distinguished time-defined pre-stress, early-stress, and late-stress periods with an accuracy of 92.4%. Plant-level generalization was further assessed using six-fold leave-one-plant-out cross-validation, resulting in a mean test accuracy of 90.25 ± 1.78% on unseen plants. These findings demonstrate that RGB-based plant-level analysis can support non-destructive drought-stress assessment and that canopy segmentation improves classification by reducing background influence.
Why it matches plant phenotyping methodsRGB画像からレタス個体の乾燥ストレス状態を推定する検出・セグメンテーション・分類フレームワークを開発し、複数サイクル、未見個体、性能指標で検証しており、表現型取得手法が中心である。
abstractThis study presents a detection-guided deep learning framework for plant-level drought-stress assessment in hydroponically grown lettuce using bird’s-eye-view RGB images.
Abstract A systematic review based on 174 Scopus-records of studies using YOLO-type one-stage detectors for detecting citrus fruits, their count, and yield estimation followed PRISMA guidelines 2020. The title/abstract-screening process, done in duplicate (κ=0.920) yielded 90 included study-records, followed by two further post-hoc exclusions. Each study in the 80 reporting on fruit-level detection showed an average precision of 89.6%, recall of 85.9%, and mAP@0.5 of 91.0%. However, coverage for any individual metric rarely exceeded half of the studies, and only 13% were able to report the more stringent mAP@0.5:0.95. Both YOLOv8 and YOLOv5 were each utilized as the backbone architecture by approximately 22.2% of the studies. From 2025, YOLOv11 has also been emerging. Half of all studies modified architectural components including attention modules, lightweight architectures, and variants of IoU loss functions. Original contributions are generally concentrated in downstream tracking, sensor fusion, and yield modeling rather than the detector itself. A custom-made seven-domain risk of bias tool was developed and utilized by two reviewers who arbitrated discrepancies (91.5%). Results showed that all but one of the reviewed studies had a high level of risk due to almost universal lack of statistical validation and limited dataset diversity; a sensitivity analysis excluding the most risky studies left the performance profiles nearly identical. We conclude that the field has converged around a common technical toolkit but continues to lack standardized benchmarks, multispectral data, and rigorous field-deployment validation.
Why it matches plant phenotyping methods柑橘果実の検出・計数・収量推定に用いる画像解析手法を体系的にレビューし、性能評価、リスク・オブ・バイアス、標準化やベンチマーク不足を検討しており、植物フェノタイピング手法が中心である。
abstractA systematic review based on 174 Scopus-records of studies using YOLO-type one-stage detectors for detecting citrus fruits, their count, and yield estimation followed PRISMA guidelines 2020.
Potato, one of the world's most important staple food crops, is highly susceptible to various foliar diseases that significantly affect its productivity and pose a serious threat to food security, thereby contributing to economic losses and impacting farmers’ income. Therefore, early and accurate detection is essential. Conventional detection methods rely primarily on manual observation, which is time-consuming and requires specialized personnel. In this study, five convolutional neural network (CNN) architectures were evaluated for the automatic classification of potato leaf diseases, including pretrained models (ResNet50, MobileNet, and VGG16) and models trained from scratch (AlexNet and LeNet-5). The dataset was constructed by integrating and selecting images from publicly available Kaggle repositories, resulting in a total of 6,691 images distributed across five classes: early blight, late blight, potato leafroll virus (PLRV), mosaic virus (PVY), and healthy leaves. Multiple experiments were conducted by varying hyperparameters such as batch size, optimizers, and the number of training epochs. The results show that VGG16 achieved the best performance, with an accuracy of 99.87%, outperforming the other architectures. Additionally, a mobile application based on the optimal model was developed for real-time detection. These findings demonstrate the potential of deep learning for intelligent and scalable agricultural diagnostic systems.
Why it matches plant phenotyping methodsジャガイモ葉の病害状態を画像から自動分類するCNN手法を比較・評価し、最適モデルと実時間アプリを開発しており、植物表現型取得が中心である。
abstractfive convolutional neural network (CNN) architectures were evaluated for the automatic classification of potato leaf diseases
Background Global soybean production is constrained by scarce arable land, and standardized evaluation tools remain lacking for natural mixed saline-alkali stress, the predominant abiotic stress under field conditions. Objective This study aimed to establish a comprehensive saline-alkali tolerance evaluation system for soybean germplasms via integrated multivariate statistical methods, and screen core and auxiliary indicators for efficient germplasm identification. Methods Seventy-one soybean germplasms were tested under 90 mmol/L mixed saline-alkali stress (NaCl:Na 2 SO 4 :NaHCO 3 :Na 2 CO 3 = 1:9:9:1, pH 8.2) simulating natural saline-alkali soil. We quantified the saline-alkali tolerance coefficients (SATC) of 13 morphological and physiological indicators, followed by coefficient of variation (CV), principal component analysis (PCA), subordinate function, cluster analysis and regression modeling. Results Significant inter-germplasm variations in saline-alkali tolerance were detected, and indicators with CV > 0.35 ( e.g ., root length (RL), root fresh weight (RFW)) were screened as primary indices. PCA extracted five principal components with 87.18% cumulative variance contribution, and the integrated analytical pipeline categorized germplasms into five tolerance grades: eight highly tolerant, 24 moderately tolerant, 13 generally tolerant, 16 sensitive and 10 highly sensitive accessions. A high-precision prediction model was constructed ( D = 0.290 X 1 - 0.026 X 2 + 0.438 X 3 + 0.402 X 4 + 0.180 X 5 + 0.153 X 6 + 0.813 X 7 - 1.123; R 2 = 0.998, where X 1 - X 7 represent the SATC of germination rate (GR), RL, RFW, total fresh weight (TFW), shoot dry weight (SDW), root dry weight (RDW), and total dry weight (TDW), respectively). A Chi-squared Automatic Interaction Detection (CHAID) decision tree model was further developed and validated using 10-fold cross-validation, yielding a cross-validation risk value of 0.003, which was comparable to the resubstitution risk value (0.002), indicating good generalization ability and low risk of overfitting. A novel five-dimensional overlapping analysis identified RFW as the core evaluation indicator, with RDW, TFW and R/S as key auxiliary indicators. Conclusion This study delivers a standardized, reproducible technical framework for large-scale screening of saline-alkali-tolerant soybean germplasms. It facilitates global saline-alkali land utilization, accelerates worldwide soybean stress-tolerance breeding, and provides a transferable paradigm for stress tolerance evaluation in other major crops.
Why it matches plant phenotyping methodsダイズの耐塩・耐アルカリ性を評価するための形態・生理形質の統合評価体系、予測モデル、指標選定、交差検証を中心的に開発・検証しており、再利用可能な植物表現型評価手法に該当する。
abstractThis study aimed to establish a comprehensive saline-alkali tolerance evaluation system for soybean germplasms via integrated multivariate statistical methods, and screen core and auxiliary indicators for efficient germplasm identification.
Abstract Purpose Timely, accurate, and field-scale crop yield mapping is essential for precision crop management, yet most existing studies rely on late- or full-season data, limiting in-season decision-making. This study aims to develop a stage-aware earliest possible corn yield mapping framework that balances early data availability, predictive accuracy, and spatial fidelity by integrating Sentinel-2 imagery, vegetation indices (VIs), and accumulated growing degree days (AGDD). Methods Corn yield data were collected from a commercial farm over three growing seasons (2018–2020). The final modeling dataset included 51,794 Sentinel-2 10 m aggregated yield samples across three seasons: 2018 ( n = 16400), 2019 ( n = 18534), and 2020 ( n = 16860). Sentinel-2 raw spectral bands and derived VIs were organized for V4, V6, R1, R5, and R6 growth stages based on AGDD- and DAP-defined corn growth-stage windows, also confirmed visually on-ground, allowing observations from different planting and harvest dates across the three growing seasons to be aligned by crop developmental stage rather than calendar date. A stage-wise Pearson correlation and frequency-based selection identified informative and non-redundant VI subsets across crop development. Four machine learning models: Random Forest (RF), XGBoost (XGB), k-Nearest Neighbors (kNN), and a Neural Network (NNET; multi-layer perceptron) were trained using 13 input configurations, including individual growth stages and multi-stage combinations capturing phenological progression. Models were tuned via randomized search, trained on 2018–2019 data, and independently validated on the 2020 season. Yield predictions were mapped directly at 10 m Sentinel-2-pixel resolution without spatial interpolation to preserve fine-scale variability. Results Model performance was strongly influenced by phenological stage selection. Among single-stage inputs, R1 was the earliest stage where reliable yield mapping could be availed (RF: R² = 0.56, RMSE = 29.50%). While combining V6 with R1 stage inputs substantially improved predictive performance (RF: R² = 0.70, RMSE = 24.13%) for the yield mapping at the R1 stage, where V6-stage signals provided complementary yield-related information. The full-season combination (V4 + V6 + R1 + R5 + R6) produced the highest accuracy (RF: R² = 0.72, RMSE = 23.28%) but would be less suitable for early in-season decision-making. Early- or late-stage-only inputs (V4, R5, R6) showed weaker and less stable cross-year performance. Among algorithms, RF consistently generalized best to the independent 2020 dataset and is recommended for operational use. XGB showed strong training performance but reduced cross-year stability, kNN yielded moderate accuracy, and NNET achieved accuracy comparable to RF while closely reproducing observed spatial patterns such as center-pivot effects and edge gradients. Direct 10 m mapping preserved yield heterogeneity and avoided smoothing artifacts common in interpolation-based approaches. Conclusion Stage-aware feature selection and phenology-informed input combinations are critical for balancing yield prediction timeliness and accuracy. For operational in-season yield mapping, the RF model using the V6 + R1 stage combination provides a practical and reliable solution, enabling early, accurate, and spatially detailed yield estimates with robust cross-year performance. This study presents a deployable framework for integrating satellite time series and weather data into conventional (non-sequential) machine learning models to support proactive, within-season decision-making in precision agriculture.
Why it matches plant phenotyping methods衛星画像・気象データと機械学習を統合し、作物の収量という明示的な植物形質を圃場内10 m解像度で推定する手法を開発・独立年で検証しており、フェノタイピング手法が中心である。
abstractThis study aims to develop a stage-aware earliest possible corn yield mapping framework that balances early data availability, predictive accuracy, and spatial fidelity by integrating Sentinel-2 imagery, vegetation indices (VIs), and accumulated growing degree days (AGDD).
Conventional breeding for ideotypes in target environments remains challenging due to genotype-by-environment interactions and the genetic complexity of key agronomic traits. Traditional multi-environment field trials are costly and time-consuming, limiting rapid genetic gain. These challenges highlight the need for digital tools to support rice breeding. However, two major approaches, genomic prediction (GP) and gene-based crop models (GBCMs), have distinct advantages. In this study, a dataset derived from a natural rice population comprising 210 genotypes, genotyped with about 650,000 markers, rice dry matter, and yield across three environments, was used to develop two genomic prediction models, genomic best linear unbiased prediction (GBLUP) and a convolutional neural network (CNN), together with a gene-based crop modeling framework. The effectiveness of these models in predicting rice traits and assisting in breeding selection was subsequently evaluated. Prediction results indicated that biomass and yield could be effectively predicted by all models, with Normalized Root Mean Square Error (NRMSE) values ranging from 10.60% to 18.59% and 9.93% to 18.19%, respectively. In terms of predictive accuracy, parameter-based crop models achieved the highest predictive accuracy, although it was confined to theoretical simulations. This was followed by the GBCM and CNN, whereas the GBLUP exhibited the lowest performance. Furthermore, GGE biplot analysis revealed the predictions of the GBCM aligned more closely with field observations than those of the CNN, emphasizing the potential of GBCM as a practical surrogate for digital breeding. These results provide valuable insights into modeling genotype-by-environment interactions and support the development of data-informed breeding strategies for future rice improvement.
Why it matches plant phenotyping methodsイネの乾物量・収量という植物形質を予測する複数の計算モデルを開発・比較評価しており、形質推定手法が研究の中心である。
abstractIn this study, a dataset derived from a natural rice population comprising 210 genotypes, genotyped with about 650,000 markers, rice dry matter, and yield across three environments, was used to develop two genomic prediction models, genomic best linear unbiased prediction (GBLUP) and a convolutional neural network (CNN), together with a gene-based crop modeling framework.
Accurate long-term monitoring of winter wheat phenology is important for crop growth assessment and irrigation management, but 30 m Landsat-based phenology retrieval remains challenging because of sparse observations, cloud contamination and sensor differences. This study developed and evaluated an integrated Landsat-based workflow for monitoring winter wheat phenology in the People’s Victory Canal (PVC) Irrigation Area of northern Henan and the Alar Irrigation Area of southern Xinjiang from 2000 to 2024. Winter wheat areas were mapped using temporally stacked NDVI/EVI features and a CART classifier. Vegetation-index trajectories were reconstructed using locally adjusted cubic-spline capping combined with Savitzky–Golay filtering, and green-up, jointing, heading and maturity were extracted using threshold- and derivative-based detection. The CART-based mapping achieved an overall accuracy of 89.51%, with higher accuracy in Alar (91.45%) than in PVC (84.35%). Compared with S-G-only, Whittaker and TIMESAT-like approaches, LACC + S-G reduced phenological-date errors, especially for green-up and maturity, with RMSE values within 3.1 d against agro-meteorological observations. Phenological stages generally occurred later in Alar than in PVC, and spatial autocorrelation confirmed significant clustering. Agro-meteorological analysis suggested stronger thermal associations in PVC and stronger moisture-related associations in Alar. These results provide practical 30 m phenological information for regional winter wheat monitoring and irrigation scheduling analysis.
Why it matches plant phenotyping methodsLandsat時系列から冬コムギの生育ステージを抽出するワークフローを開発し、複数手法との比較および農業気象観測による精度検証を行っており、植物フェノタイピング手法が研究の中心である。
abstractThis study developed and evaluated an integrated Landsat-based workflow for monitoring winter wheat phenology
Lodging is a major yield-limiting factor in soybean, but efficient large-scale phenotyping and genetic dissection of this complex trait remain challenging for breeding programs. To bridge this gap, this study developed an integrated, breeding-oriented framework that links UAV-based high-throughput phenotyping with candidate gene identification. Field experiments involving 741 diverse soybean genotypes were conducted over two years, with UAV remote sensing performed at key reproductive stages (from R5 to R7). We identified UAV-derived structural (relative plant height), textural (homogeneity, dissimilarity, correlation), and spectral (NDVI, EVI, NDRE) features as the most sensitive indices for retrieving lodging severity. The fusion of these complementary features, coupled with the XGBoost algorithm, achieved high classification accuracy (0.81–0.92) across genotypes, growth stages, and years. This reliable phenotyping pipeline enabled the precise selection of contrasting genotypes (lodging-resistant vs. lodging-prone) for transcriptomic analysis. Transcriptome sequencing revealed 13,447 differentially expressed genes, with significant enrichment in phenylpropanoid and starch–sucrose metabolic pathways. Moreover, the haplotype analysis within a natural population identified superior allelic variants of two candidate genes ( Glyma.19G249100 and Glyma.05G142200 ) significantly associated with soybean lodging resistance. This work can effectively bridge the gap between scalable field phenotyping and the discovery of functionally validated breeding targets, providing an efficient and translational framework to accelerate the development of lodging-resistant soybean varieties.
Why it matches plant phenotyping methodsUAV画像・リモートセンシング特徴量とXGBoostを統合し、ダイズの倒伏重症度を大規模に推定・検証する育種向け表現型解析パイプラインが研究の中心である。
abstractthis study developed an integrated, breeding-oriented framework that links UAV-based high-throughput phenotyping with candidate gene identification
Canopy 3D architecture is a critical determinant of light interception, photosynthetic efficiency, and final yield in cotton, yet its rapid and accurate characterisation remains challenging in field conditions. To achieve efficient, non-destructive, and quantitative monitoring of the canopy structure of field-grown cotton, this study proposes a 3D structure-based technology stack for high-efficiency, low-cost, and high-precision phenotyping extraction. This stack directly addresses the technical bottlenecks of traditional 3D data acquisition, namely high cost, long processing time, and low operational efficiency, which have hindered large-scale application. We developed a pipeline that integrates a fast reconstruction algorithm with a scale-recovery mechanism using ground control points (GCPs), enabling the generation of true-scale 3D point clouds from UAV aerial images in a cost- and time-effective manner. Using only 141 UAV images and with a reconstruction time of approximately 20 min, we efficiently reconstructed high-quality, scale-accurate point clouds of two 5.5 m × 5.5 m cotton plots, significantly outperforming SfM-MVS and Instant-NGP in terms of both reconstruction efficiency and point cloud completeness. This method, whose current validation is confined to a single season, one growth stage, and two experimental plots, not only achieves a breakthrough by using fewer input images with high efficiency, but also ensures point cloud accuracy and completeness, showing strong potential for rapid field monitoring and real-time management. Based on the high-quality reconstructed point clouds, we further quantitatively evaluated canopy characteristics at harvest, analyzing the coefficient of variation of canopy height, porosity distribution, and canopy volume fraction. The core shortcomings and optimization strategies for the existing canopy structure were identified, providing scientific data support and practical technical references for precision cultivation management and mechanization-compatible planting in cotton.
Why it matches plant phenotyping methodsUAV画像からの3D点群再構成とスケール復元パイプラインを開発・比較検証し、綿花キャノピー形質を定量化することが研究の中心であるため含める。
abstractthis study proposes a 3D structure-based technology stack for high-efficiency, low-cost, and high-precision phenotyping extraction.
Accurate estimation of the cotton seedling Leaf Area Index (LAI) is essential for yield prediction and precision crop management. Traditional manual methods are limited by low throughput, while two-dimensional remote sensing techniques often struggle with sparse canopy cover and soil background interference. Although three-dimensional LiDAR presents a promising alternative, existing deep learning approaches typically depend on costly fully supervised point-wise annotations. To address this challenge, this study proposes an end-to-end framework that integrates UAV-based LiDAR, weakly supervised segmentation, and physical parameter inversion. A weakly supervised network, termed CogNet, was developed—incorporating self-distillation and structure-aware label propagation—to achieve precise segmentation of cotton plants using only 10% sparse annotations. Following instance segmentation via Density-Based Spatial Clustering of Applications with Noise (DBSCAN), individual plant phenotypic traits were extracted. A nonlinear Extreme Gradient Boosting (XGBoost) model was then constructed to invert LAI by leveraging allometric relationships between 3D structural parameters and leaf area. Experimental results showed that CogNet achieved an Intersection over Union (IoU) of 85.34%, effectively mitigating overfitting to label noise and achieving performance competitive with the fully supervised RandLA-Net (82.13%). Notably, under the specific conditions of this cotton seedling dataset characterized by strong geometric priors, the weakly supervised model demonstrated enhanced robustness against annotation inconsistencies. The framework attained a plant detection rate of 96.2%, and the XGBoost model delivered high estimation accuracy (R² = 0.879, RMSE = 0.138). This study demonstrates that weakly supervised learning can substantially reduce annotation costs while maintaining model performance, providing an efficient and cost-effective solution for field-scale crop phenotyping.
Why it matches plant phenotyping methodsUAV-LiDAR、弱教師ありセグメンテーション、個体形質抽出、LAI推定を統合した作物フェノタイピング手法の開発・評価が研究の中心である。
abstractthis study proposes an end-to-end framework that integrates UAV-based LiDAR, weakly supervised segmentation, and physical parameter inversion.
Early detection of latent fungal decay caused by Penicillium italicum(P. italicum) and Penicillium digitatum(P. digitatum) remains challenging due to the absence of visible symptoms. In this study, a Vis-NIR hyperspectral imaging framework was developed to characterize early biochemical alterations in navel oranges. To address sample scarcity, a generative modeling approach (WGAN-GP) was employed to capture the intrinsic physiological variability of infected tissues. The successive projections algorithm (SPA) identified 20 key wavelengths associated with water redistribution (OH), carbohydrate depletion (CH), and chlorophyll degradation. These wavelengths were expanded into continuous ROI windows (W = 17), enabling integration of narrow-band pigment signals and broad-band absorptions related to water and carbohydrates via a multi-scale mixture-of-experts (MS-MoE) network. The framework achieved a classification accuracy of 97.10% and an F1-score of 0.9666. These results demonstrate that specific spectral absorption windows can serve as reliable, chemically interpretable spectral biomarkers for detecting early pathological changes in citrus fruit.
Why it matches plant phenotyping methodsVis-NIRハイパースペクトル画像と解析モデルを開発し、柑橘果実の初期病変をスペクトル特徴から推定する方法が研究の中心であるため、植物病害表現型の計測手法として含める。
abstracta Vis-NIR hyperspectral imaging framework was developed to characterize early biochemical alterations in navel oranges.
Sun-induced chlorophyll fluorescence (SIF) is an effective proxy for vegetation photosynthesis, but tower-based retrieval suffers from atmospheric path interference under humid and variable conditions. We present a DOAS-based SIF retrieval algorithm that operates in Fraunhofer lines (680–686 nm, 745–758 nm) and water vapour-sensitive bands (717–727 nm). It constructs an adaptive reference spectrum from SCOPE simulations and PCA and incorporates H2O absorption cross-sections into the fitting process for active atmospheric correction. The algorithm is implemented in a dedicated tower-based system integrating a 1° scanning gimbal with a high-resolution spectrometer. Validation with simulated and field data demonstrates the following: (1) the algorithm retrieves SIF with high fidelity (correlation coefficients >0.9 across all windows); (2) it exhibits lower water-vapour sensitivity and greater cloudy-sky stability than FLD, 3FLD, and SFM, achieving the lowest coefficient of variation (CV = 0.356); (3) over a complete wheat–rice rotation, the retrieved SIF tracks crop growth and phenological stages. This work provides a reliable solution for automated, high-precision tower-based SIF observation under complex atmospheric conditions.
Why it matches plant phenotyping methods植物の光合成状態を示すSIFを取得するタワー型分光観測システムとDOAS補正アルゴリズムを開発し、シミュレーションおよび圃場データで検証しているため、植物フェノタイピング手法が中心である。
abstractWe present a DOAS-based SIF retrieval algorithm
Live imaging of plant subcellular structures is key to deciphering the spatiotemporal bases of cellular processes, and their functional impact on growth and morphogenesis at various biological scales. Live imaging of plant cells essentially relies on expression of fluorescent markers labeling cells or subcellular structures of interest. Simultaneous multi-channel imaging of several markers is still not routine practice in plant cell biology, owing to issues linked to genetic or spectral compatibility of markers, differences in expression levels, silencing, toxicity, etc. Here we designed a three-color marker in Arabidopsis thaliana and Capsella rubella , enabling high-resolution live imaging of plant morphogenesis, including labeling of the cell membrane, the nucleus and the microtubule cytoskeleton. Detection of MT arrays involved the development of a MAP4-MBD-based microtubule marker optimized for plant cells. The three- color marker allows visualization of the three-dimensional organization and dynamics of plant microtubules within the intracellular space with unprecedented precision, in various organs including the root and shoot meristems, the leaf, anther, and gynoecium. Our results demonstrate the potential of such single-construct strategy for cell biology studies in plants.
Why it matches plant phenotyping methods植物細胞の形態形成を可視化する三色ライブイメージング法と、植物細胞用に最適化した微小管マーカーの開発が研究の中心である。
abstractDetection of MT arrays involved the development of a MAP4-MBD-based microtubule marker optimized for plant cells.
Accurately quantifying the areas of necrotic lesions on plant leaves is essential for evaluating plant-pathogen interactions and disease resistance. Although digital image analysis methods using ImageJ are widely employed, they often require case-specific optimization and may not be readily applicable across different experimental conditions. Furthermore, many studies have used ImageJ for lesion measurement without providing methodological details, which limits reproducibility. Here, we present a simple, step-by-step ImageJ workflow for measuring irregular necrotic lesions using a standard personal computer and mouse. The procedure relies on manual lesion selection using the freehand selection tool, followed by Gaussian smoothing, binarization, and automated particle analysis to extract lesion area measurements. By balancing manual isolation with computational thresholding, this protocol eliminates the need for extensive parameter tuning. This approach provides an accessible, reliable alternative to time-consuming color thresholding methods, thereby improving transparency and reproducibility in lesion quantification. The workflow's reproducibility has been confirmed through both intra-user and inter-user analyses. Key features • Relies on simple manual freehand selection combined with minimal image processing, requiring only a standard computer and mouse without specialized software or advanced training. • Enables accurate quantification of irregular necrotic lesions in conditions where automated thresholding methods require time-consuming optimization. • Provides a fully detailed, reproducible ImageJ workflow addressing common gaps in published methods, facilitating direct implementation. • Demonstrates high reproducibility, validated by intra-user and inter-user statistical analyses, ensuring reliable lesion quantification regardless of the operator.
Why it matches plant phenotyping methods植物葉の壊死病斑面積を画像から抽出するImageJワークフローを開発し、ユーザー内・ユーザー間解析で再現性を検証しており、病害表現型の取得手法が中心である。
abstractHere, we present a simple, step-by-step ImageJ workflow for measuring irregular necrotic lesions using a standard personal computer and mouse.
Accurate quantification of plant disease severity is essential for evaluating host-pathogen interactions and assessing the effectiveness of disease management strategies. Traditional visual scoring methods and manual estimation of infected tissue are widely used but are often subjective and prone to observer bias. Digital image analysis offers an objective alternative by enabling automated identification and quantification of symptomatic plant tissues based on color and spatial characteristics. Here, we present a MATLAB-based image processing protocol for differentiating diseased and healthy plant tissue from digital leaf images. The workflow involves acquisition of standardized leaf images, conversion of RGB images into hue-saturation-value (HSV) color space, segmentation of diseased tissue using defined HSV thresholds, refinement of the segmented mask through morphological operations, and extraction of the whole leaf area. The protocol then calculates the diseased area and total leaf area in pixels and computes the percentage of infected tissue. The method uses MATLAB together with the Image Processing Toolbox and can be implemented using simple scripts. This protocol enables rapid and reproducible quantification of disease severity in plant leaves exhibiting visually distinct symptoms such as necrotic lesions or blight patches. By minimizing observer bias and providing quantitative measurements of infected area, the protocol offers a practical and reproducible approach for plant disease phenotyping and evaluation of disease management strategies across diverse plant-pathogen systems where diseased tissues can be clearly distinguished from healthy tissues under reasonably controlled imaging conditions. Key features • A reproducible MATLAB-based workflow for separating diseased and healthy plant tissue using color-space segmentation. • Applicable to plant diseases where symptomatic tissue contrasts clearly with healthy tissue (necrosis, blight lesions, rot patches). • Requires digital leaf images, MATLAB, and the MATLAB Image Processing Toolbox for image processing and disease quantification. • Enables rapid calculation of diseased leaf area and disease severity using automated pixel-based quantification.
Why it matches plant phenotyping methods植物病斑を画像から分割・定量し、感染面積と病害重症度を算出するMATLAB画像解析プロトコルが研究の中心であり、植物病害表現型の取得・抽出手法に該当する。
abstractHere, we present a MATLAB-based image processing protocol for differentiating diseased and healthy plant tissue from digital leaf images.
Reproduction assets foundThe protocol explicitly deposits its authors' MATLAB image-processing workflow (HSV segmentation, mask refinement, pixel-based disease quantification) in a public GitHub repository with README instructions and example images.Code · publicGitHub repository containing the MATLAB source code, README file with installation and execution instructions, and representative example image(s): https://github.com/pankajborahmajuli-source/Leaf-Disease-Detection-MATLAB-Code/blob/main/README.mdOpen asset ↗Leaf-Disease-Detection-MATLAB-Codehtml-lines:112-148Plant phenotyping relevance match · UnverifiedCrossref · checked 15 Sept 2026
Food safety globally is threatened by crop disease, which creates a major obstacle to yield losses, so there is an urgent need for rapid, precise, and large-scale diagnostic methods for all the global risks crops are exposed to from disease. While imaging sensors, as well as Artificial Intelligence (AI), have made great strides in recognising plant disease, most literature does not have a comprehensive analysis that combines methods, technology, and implementation. Therefore, a systematic literature review follows PRISMA methods; we review 61 excellent studies published within the last five years that outline the advancement of imaging modalities (Red, Green, Blue (RGB), multispectral/ hyperspectral, thermal), deep learning architectures, augmentation of data, explanation methods and IoT (Internet of Things)-edge-cloud for managing intelligent agriculture. These modern AI-based systems (AI systems) have consistently produced accurate results above 98%. However, there are problems with the generalisability (across hybrid plant species), robustness (when exposed to environmental stresses), and interpretability of the results presented to consumers. This review represents the first compilation of using imaging sensors, artificial intelligence models, Internet of Things architecture (IoT-edge), and robotics into one comprehensive framework for the detection of plant disease in the next generation. In addition, this review suggests future research directions, including lightweight edge-deployable models, multimodal sensor fusion, interpretable AI, larger validated datasets, and autonomous robotic systems for scalable and sustainable smart agriculture.
Why it matches plant phenotyping methods植物病害の画像・センサーによる検出手法を体系的にレビューしており、病害状態のフェノタイピング手法が中心です。
titleComprehensive Review of Plant Disease Detection: Advancements in Imaging Sensors, AI Techniques, and Future Directions in Smart Agriculture
Fluorescence in situ hybridisation (FISH) is a valuable technique for visualising RNA molecules in their native cellular context. Still, its application in plant tissues is often limited by tissue autofluorescence and the lack of optimised protocols. Here, we developed and validated a simple, reproducible FISH workflow to detect Apple scar skin viroid (ASSVd) in cucumber. Systematic optimisation of probe chemistry, tissue selection, and sampling stage significantly improved assay sensitivity and reproducibility. The AZDye594-labelled antisense riboprobe produced higher signal-to-background ratios and lower background fluorescence than fluorescein-labelled probes, enabling reliable detection of ASSVd in vascular-associated tissues. The optimised workflow consistently detected ASSVd in both leaves and stems. High-resolution confocal imaging further revealed predominant nuclear accumulation of ASSVd RNA in infected cells. Together, this study establishes a sensitive and accessible FISH workflow for localisation of ASSVd in cucumber and provides a practical platform for investigating the spatial distribution of viroid and other plant RNA pathogens.
Why it matches plant phenotyping methods植物組織内の病原体RNAの空間局在を可視化・定量可能にするFISHワークフローを開発・検証しており、植物状態の画像取得法が研究の中心である。
abstractHere, we developed and validated a simple, reproducible FISH workflow to detect Apple scar skin viroid (ASSVd) in cucumber.
Field / plotLiDAR / point cloudMultispectral / hyperspectralLeafMorphology / geometry measurementLeaf traits
Canopy Leaf Area Index (CLAI) is a stand attribute containing information on the real-time health and growth potential of managed pine plantations. Current remote sensing techniques for quantifying CLAI rely on simple linear models applied to satellite multispectral imagery, or on techniques based on light detection and ranging (LiDAR) data that are costly and less frequently collected. This study demonstrates a convolutional neural network (CNN) approach to retrieving CLAI from 10 m Sentinel-2 multispectral imagery with a model trained on gridded LiDAR-based CLAI estimates. We demonstrate large gains in accuracy with the CNN compared to traditional linear models based on vegetation indices (e.g., Simple Ratio), but also clear shortfalls in model skill when predicting “blind” in some spatial domains that were completely excluded during model training. Pixel-scale root mean squared error ranged from 0.34 to 0.64 by domain when exposed to CLAI training data from all available spatial domains, but rose to 0.58–1.74 when predicting without prior domain-specific training. Prediction accuracy was consistently lower when applied to completely unobserved USGS LiDAR-based CLAI estimates. Traditional linear models, in contrast, had the advantage of usually lower prediction error across unobserved spatial domains (0.43–1.98), but with lower maximum accuracy. These results demonstrate a potential route for deploying more complex models for LiDAR “mimicry”, e.g., between data acquisitions widely separated in time, but advocate for the development and use of more stable generalized approaches for use in unobserved managed pine stands.
Why it matches plant phenotyping methodsLiDARで得た林分の葉面積指数をSentinel-2画像とCNNから推定する手法を開発・比較検証しており、植物キャノピー形質の取得が研究の中心です。
abstractThis study demonstrates a convolutional neural network (CNN) approach to retrieving CLAI from 10 m Sentinel-2 multispectral imagery with a model trained on gridded LiDAR-based CLAI estimates.
NeRF / 3D Gaussian SplattingFruit2D/3D reconstructionSegmentation
High-fidelity and lightweight 3D fruit models are a crucial foundation for phenotypic analysis and automated agricultural robotic operations. However, in complex agricultural scenarios characterized by varying illumination and foliage occlusion, existing 3D reconstruction methods struggle to balance reconstruction accuracy and model size, often generating massive redundant background primitives. To address this challenge, this paper proposes a novel framework for lightweight and high-fidelity 3DGS fruit reconstruction via geometric-semantic joint constraints. Specifically, the method first integrates depth priors and semantic information through a Depth-Guided Semantic Segmentation module to extract accurate target fruit masks. Next, it eliminates background noise points from the initial point cloud using a multi-view Reprojection Consistency Voting mechanism. Simultaneously, a Stochastic Background Regularized Hybrid Loss is introduced during the 3DGS training phase to decouple density and color optimization, thereby suppressing the regeneration of background Gaussian primitives. Experimental results on a multi-category fruit dataset demonstrate that while maintaining a high novel view synthesis quality (PSNR of 31.87 dB), our proposed method reduces the average model size from 230.42 MB to 62.66 MB (a 72.8% reduction), achieving robust, high-fidelity, and lightweight 3D fruit reconstruction.
Why it matches plant phenotyping methods果実の3D形状を抽出・再構成する画像ベース手法が研究の中心であり、果実形態のフェノタイピングに直接利用可能な方法を開発・評価している。
abstractHigh-fidelity and lightweight 3D fruit models are a crucial foundation for phenotypic analysis
Cell polarity and tip growth rely on the dynamic spatial organization of signaling and structural components. Quantitative characterization of these spatiotemporal dynamics is critical for understanding polarized cell growth, yet manual quantification is labor-intensive and existing computational tools often lack the flexibility and robustness needed to analyze molecular and structural dynamics in tip-growing cells. Tip Quantification (TipQuant) identifies the cell apex by detecting the site of maximum expansion and automatically quantifies fluorescence distribution along the plasma membrane and within the apical cytoplasm from live-cell imaging data, enabling analysis of the spatiotemporal dynamics of molecular and structural components in tip-growing cells. TipQuant accurately identified cell apices and quantified the spatiotemporal behavior of fluorescently labeled proteins and cellular structures in Arabidopsis thaliana pollen tubes and Fusarium graminearum hyphae, reproducing manual measurements while reducing user bias and improving efficiency, consistency, and analytical flexibility. The tool also revealed a strong positive correlation between rho-like GTPase from plants activity and apical Ca 2+ influx in Arabidopsis pollen tubes, demonstrating its utility for analyzing dynamic cellular processes. TipQuant is a robust analytical tool for quantifying spatiotemporal dynamics in tip-growing cells, providing a flexible alternative to manual image analysis and enabling studies of the molecular mechanisms underlying polarized growth.
Why it matches plant phenotyping methodsTipQuantはライブセル画像から植物の細胞先端位置、膜上の蛍光分布、先端細胞質内の動態を自動定量する解析ツールであり、画像ベースの植物表現型・状態取得が研究の中心です。
abstractTip Quantification (TipQuant) identifies the cell apex by detecting the site of maximum expansion and automatically quantifies fluorescence distribution along the plasma membrane and within the apical cytoplasm from live-cell imaging data
Wheat grain number integrates fate of individual florets, strongly affected by environmental stress during sensitive stages like meiosis. Because development is asynchronous across tillers, spikelets, and florets, it is hard to distinguish stress tolerance from stress escape. Based on 2400 destructive measurements of spike and anther length together with non-destructive morphological measurements from 158 plants grown in four experiments in controlled-environment, we developed a framework to track individual floret developmental stages at plant level. We applied it in two case studies for connecting within-plant developmental asynchrony to reproductive success under favorable or heat conditions. All florets showed a common relative growth rate, producing additive delays across tillers (1-7 d), spikelets (1-5 d), and floret positions (1-6 d). This generated a developmental map for every floret based on external traits. Under control conditions, grain set probability at floret level combined both positional and developmental effects within a spike. Under heat stress, grain loss occurred only in florets at meiosis during the stress, allowing to quantify a true "stress response", while later florets escaped damage. This framework allows understanding and predicting floret development and linking it to grain set, clearly distinguishing timing effects from positional influences and separating tolerance from stress escape.
Why it matches plant phenotyping methods外部形態測定から個々の小花の発育段階を追跡する方法・発育マップを開発し、複数実験で適用しているため、表現型取得・推定が研究の中心である。
abstractwe developed a framework to track individual floret developmental stages at plant level
Field / plotPhotogrammetry / SfM / MVSLiDAR / point cloudMultispectral / hyperspectralWhole plant / canopy / plot / field2D/3D reconstruction
The Greater Cape Floristic Region (GCFR) in South Africa is a fire-prone biodiversity hotspot where high species richness, structural complexity, and small plant sizes (0.0001–4 m2) pose substantial challenges for remote sensing-based biodiversity assessment. Spectral similarity among species and the mismatch between plant size and sensor pixel dimensions limit the capacity of current and forthcoming spaceborne systems to resolve individual species and accurately detect plot-level diversity changes. We therefore developed a physics-based simulation framework that couples fynbos trait measurements with radiative transfer modeling in the DIRSIG (Digital Imaging and Remote Sensing Image Generation) environment towards quantifying information loss across spectral and spatial scales and to define theoretical limits for biodiversity monitoring. We constructed a three-dimensional virtual scene of post-fire fynbos communities in Grootbos Private Nature Reserve, integrating high-resolution imagery, terrestrial laser scanning (TLS), and structure-from-motion (SfM)-derived point clouds. Field measurements of mean diameter and percent cover were used to scale vegetation models and constrain species abundance. We distributed plant instances using a blue noise sampling algorithm, guided by density maps derived from unmanned aerial system (UAS) imagery. Species-specific optical properties were parameterized using field-measured reflectance data and the PROSPECT radiative transfer model, while terrain structure was derived from SfM-based digital terrain models. The integrated scene was used to simulate multispectral (DJI Mavic 3 MSI), hyperspectral (AVIRIS-NG), and light detection and ranging (LiDAR) observations. Agreement between simulated outputs were evaluated against corresponding field-acquired datasets using spectral signatures and vegetation indices. This framework enables systematic assessment of sensor specification effects on spectral biodiversity metrics and provides a pathway for evaluating theoretical limits of species discrimination across airborne and satellite platforms.
Why it matches plant phenotyping methods植物群落の種判別・多様性指標を対象に、物理ベースの仮想シーンとマルチモーダルセンシングを開発し、実測データで検証しているため、植物状態の取得・推定法が中心である。
abstractWe therefore developed a physics-based simulation framework that couples fynbos trait measurements with radiative transfer modeling in the DIRSIG (Digital Imaging and Remote Sensing Image Generation) environment towards quantifying information loss across spectral and spatial scales and to define theoretical limits for biodiversity monitoring.
Introduction In a complex orchard environment, canopy apples are obscured by various factors, making it hard for apple harvesting robots to accurately determine which apples can be directly harvested. Furthermore, the complex obstruction leads to difficulties in identifying keypoints on the apples and caculating the axis direction, directly affecting the robot's determination of grasping positions. Methods To solve these issues, a two-dimensional (2D) axis estimation method for pickable canopy apples based on a YOLO cascade network was proposed. Firstly, the study introduced SPDConv for lossless downsampling and adopts dynamic upsampling to improve segmentation boundary accuracy, constructing an instance segmentation network named the YOLO-SD model to select pickable apples according to different occlusion conditions and growth states. Secondly, the geometric center of the mask image was located using its minimum enclosing circle, and the region of interest was extracted through morphological dilation. Then, by integrating the RFAConv, SCSA attention, and MBConv modules, a keypoint detection network YOLO-RSM was constructed to extract keypoints of pickable apples. Finally, a 2D axis construction strategy was proposed, which adaptively constructs the growth axis based on the visibility of keypoints. Results Experimental results show that the overall average accuracy mAP50 of the YOLO-SD model for apple segmentation reached 95.2%, and the parameter quantity was reduced to 2.47 M. The average accuracy of the YOLO-RSM model for keypoint detection has reached 90.3%, which is 2.4%, 2.6%, and 4.7% higher than that of the YOLOv8n, YOLO11n, and YOLO12n models respectively. The 2D axis estimation algorithm has an average axis angular error of 7.23° ± 16.73°, and an axis estimation accuracy of 92.68%. Discussion The proposed method can achieve high-precision canopy apple segmentation, keypoint detection, and 2D axis estimation, thus offering technical support for the picking operations of apple harvesting robots.
Why it matches plant phenotyping methodsリンゴ果実のセグメンテーション、キーポイント抽出、成長軸（器官形態）の推定を中心に新規画像解析法を開発・検証しており、単なる収穫対象の検出を超える植物器官形質の推定に該当する。
abstracta two-dimensional (2D) axis estimation method for pickable canopy apples based on a YOLO cascade network was proposed.
Plant secondary metabolites are mainly synthesized and stored in secretory tissues. Secretory canal development has been mainly characterized in Apiaceae. The secretory canals of Peucedanum praeruptorum contain pharmacologically active coumarins, but their organ-specific distribution and developmental dynamics remain poorly understood. This study integrated light microscopy (LM), transmission electron microscopy (TEM), X-ray microcomputed tomography (µ-CT), and high-performance liquid chromatography (HPLC) to investigate canal development, distribution, ultrastructure, 3D architecture, and coumarin accumulation in P. praeruptorum roots. Histological analysis showed that canals adjacent to the periderm originate from pericycle cells, whereas those in secondary phloem arise from parenchyma differentiation; both develop schizogenously. Canal quantity and dimensions varied temporally. Canals located in phloem showed density increasing toward the cambial zone, where cross-sectional areas were smaller. The canal density index increased from September to November, peaking on November 15, then declined. HPLC revealed dynamic accumulation of five major coumarins: content increased from September, peaked on November 15, then gradually decreased. TEM showed that epithelial cells surrounding the canal lumen were rich in Golgi, ER, mitochondria, plastids, starch grains, and osmiophilic droplets. µ-CT volumetric analysis and segmentation generated detailed 3D models, revealing spatial organization and enabling size-based grouping of canals (1000-3000 μm). These dimensional characteristics aligned with developmental progression. This study characterizes the ontogeny, distribution, ultrastructure, and 3D architecture of secretory canals, providing a structural foundation for investigating correlations between secretory tissues and compound synthesis.
Why it matches plant phenotyping methods根の分泌道の密度・寸法・3D構造という植物器官形質を、µ-CTの体積解析・セグメンテーションと顕微鏡法で取得・抽出しており、画像計測が研究の中心的要素である。
abstractµ-CT volumetric analysis and segmentation generated detailed 3D models, revealing spatial organization and enabling size-based grouping of canals (1000-3000 μm).
Background and aims Phytolith analysis is widely applied in palaeoecological and archaeological research, but its interpretive strength depends on the availability of robust modern reference collections. This study expands the modern Australian phytolith reference collection by analysing 42 native plant species representing 24 families and 37 genera with emphasis on silicification patterns across major growth forms, including forbs, shrubs, trees, and C3 grasses. Methods Phytoliths were extracted from available plant parts, including leaves, stems, flowers, seeds, seed pods, cones, and roots, depending on sample availability. Morphotypes were identified following ICPN 2.0, with grass silica short cell phytoliths (GSSCPs) further classified by shape and size to examine subfamily-level patterns. Phytolith morphotype percentage data were analysed using Hellinger transformation, PerMANOVA, PCA, LDA, and hierarchical clustering to assess compositional differences among plant growth forms and grass subfamilies. Key results Phytolith production varied strongly among growth forms and plant parts. Grasses were abundant producers, whereas most forbs, shrubs, and trees were trace producers or non-producers. Leaves were the most consistent source of phytoliths, while seeds and seed pods were predominantly non-producers. Grass silica short-cell phytolith (GSSCP) morphotypes showed clear subfamily-level differentiation. Pooideae produced Rondel morphotypes. Danthonoideae produced Rondel as well as wide Bilobate types. Panicoideae and Oryzoideae exhibited a pronounced Bilobate signature, commonly associated with Polylobate and Cross forms. Non-grass taxa (woody, shrubs, and forbs) were dominated by Spheroids, Tracheary elements, Epidermal, and Polygonal sheets and other non-diagnostic forms. Phytolith assemblages differed significantly among plant families, with Poaceae uniquely producing GSSCPs, while non-grass families showed greater overlap in assemblage composition. Conclusion By expanding taxonomic and anatomical coverage, this study strengthens the capabilities of phytoliths in the reconstruction of grasslands and in general paleo vegetation in Australia, especially where other proxies such as pollen are limited.
Why it matches plant phenotyping methods植物部位の珪酸体を抽出・形態分類し、成長形態やイネ科亜科を識別する現代参照コレクションを構築しており、植物形質の取得・判別手法が研究の中心である。
abstractThis study expands the modern Australian phytolith reference collection by analysing 42 native plant species representing 24 families and 37 genera with emphasis on silicification patterns across major growth forms
Reproduction assets foundThe authors explicitly state that the R scripts used for data analysis and figure generation are publicly available on their GitHub repository, which directly reproduces this paper's phytolith statistical analyses (PCA, LDA, PerMANOVA, clustering, plots). Supplementary data files contain the paper's measurements but noCode · publicntification of all plant specimens collected for this
study.
A
14 FUNDING
M
15 Funding for this study was provided by ARC Discovery grant DP210100508 and a Ph.D.
D
16 fellowship (UQGSS) to MH.
TE
17 DATA AVAILABILITY
18 The R scripts used for data analysis and figure generation are publicly available on GitHub
EP
19 repository: https://github.com/Manoshi-sporo/Australian-Phytolith-Reference-Collection.
20 CONFLICTS OF INTEREST
CC
21 The authors declare no competing financial or commercial interests.
A
22 AUTHOR CONTRIBUTIONS
23 MH: writing original draft, conceptualization, software, investigation. AC: Supervision, Writing -
24 Review and editing, FM: Supervision, Writing-Review and editing.Open asset ↗Manoshi-sporo/Australian-Phytolith-Reference-Collectionpdf-layout-page:34 lines:1-87Plant phenotyping relevance match · UnverifiedCrossref · checked 5 Sept 2026
Unmanned aerial vehicle (UAV)-based multispectral imaging enables flexible, non-destructive crop monitoring. Although UAV imagery offers much higher spatial resolution than satellite platforms, its effective spatial detail at typical operational flight altitudes can still be insufficient for plant-level interpretation and fine canopy structure, which can reduce vegetation-index reliability. Most super-resolution (SR) research targets RGB or satellite imagery and emphasizes perceptual or pixel-wise quality, leaving the spectral fidelity of reconstructed UAV multispectral imagery under-examined. This study benchmarked an SR evaluation framework for UAV-based five-band crop imagery (Blue, Green, Red, Red-edge, and near-infrared) using the open-source AI Hub cabbage dataset, with low-resolution inputs generated by controlled downsampling at ×2, ×3, and ×4. Nine methods (bicubic, SRCNN, EDSR, RCAN, SwinIR-based, ESRGAN-based, HAT-based, DAT-based, and DRCT-based SR) were compared under joint five-channel and band-wise reconstruction on 2170 test scenes using image-quality, spectral-angle, vegetation-index (NDVI, GNDVI, NDRE), band-wise, and efficiency metrics. EDSR and RCAN gave the most balanced performance. At ×4, band-wise reconstruction was strongest for per-band spatial fidelity, where EDSR reduced RMSE by 12.6%, and RCAN lowered near-infrared RMSE by about 21% relative to bicubic, whereas joint reconstruction with its spectral-angle and vegetation-index losses best preserved spectral relationships (spectral angle and vegetation-index errors). Learning-based gains were clearest at ×4. The recently proposed HAT-based, DAT-based, and DRCT-based attention models achieved the strongest pixel-wise RMSE and PSNR but did not surpass EDSR or RCAN on spectral angle or vegetation-index preservation under the equalized training budget. These results indicate that UAV multispectral SR should be assessed by spatial fidelity together with spectral consistency and agricultural index reliability.
Why it matches plant phenotyping methodsUAVマルチスペクトル画像の超解像法を比較・ベンチマークし、スペクトル一貫性や植生指数の信頼性を評価する研究であり、植物キャノピー形質の画像取得・抽出基盤が中心である。
abstractThis study benchmarked an SR evaluation framework for UAV-based five-band crop imagery
Abstract In real field scenarios in agriculture, automatic segmentation of plant diseases is an important technique for precision farming. However, it remains exceptionally challenging due to blurred lesions, complex morphological structures, irregular backgrounds, and severe class imbalance. While traditional convo lutional networks struggle to capture long-range semantic context and standard vision transformers fail to preserve sharp localized boundaries, this paper proposes an efficient, attention-gated hybrid framework optimized for field deployment. Our architecture leverages a hierarchical Mix Transformer (MiT-B2) encoder stream integrated with an Atrous Spatial Pyramid Pooling (ASPP) scale-space context bridge and a custom Cross-Scale Multimodal Attention Gate (CMAG) to isolate discriminative disease markers selectively. Evaluated on the highly challenging and unbalanced PlantSeg dataset, our framework achieves competitive mean Intersection over Union (mIoU) of 66.57% and an F1-score of 79.93%, while maintaining a highly compact parameter footprint of only 30.37 M. Experimental evaluations demonstrate that the proposed system establishes a new performance milestone, outperforming current competitive architectures and proving highly viable for resource-constrained edge devices. To further enhance out-of-distribution stability, we outline future directions to extend our top-performing candidate variants into a Level 1 meta-stacking ensemble optimized via few-shot learning and partial backbone fine-tuning.
Why it matches plant phenotyping methods植物病害領域の画像セグメンテーション手法を開発・評価し、病変の分割性能を定量検証しているため、植物の病害状態を推定するフェノタイピング手法が中心です。
abstractautomatic segmentation of plant diseases is an important technique for precision farming.
To address the challenges posed by large lesion-scale variations, weak boundary cues, and high inter-class similarity in rice leaf disease detection, this study proposes an improved RT-DETRv2-R50-based rice disease detection model, termed CED-RTDETR. First, a Lightweight Contour-Guided Aggregation Backbone (LCGA-Backbone) is constructed. In the PResNet residual blocks, an InceptionDWConv2d-based direction-aware depthwise separable spatial mixing strategy is introduced to capture local, horizontal, and vertical lesion texture patterns with low computational overhead. Meanwhile, a Contour-guided Efficient Global Aggregation Block (CEGA Block) is embedded after the outputs of the C3, C4, and C5 stages. Through contour-difference enhancement, channel shuffle, group-wise efficient global aggregation, and bottleneck channel mixing, the proposed block strengthens the representation of the boundaries of small lesions, weak textures, and contextual semantics. Second, a Multi-scale Evidence Interaction Fusion Neck (MEIF-Neck) is used to perform multi-scale evidence interaction and salient-region competition after cross-scale feature concatenation. A lightweight feature reconstruction process is further implemented using Spatial-Evidence RepNCSPELAN (SE-RepNCSPELAN), which is developed from a YOLO-style feature fusion structure. Finally, a Direction-Amplitude Decoupled Deformable Attention (DAD-DA) mechanism is introduced to decompose sampling offsets into direction rotation residuals and radius gains while incorporating an aspect-ratio-aware geometric compression-restoration strategy, thereby improving the geometric stability of sampling locations during the decoding stage. Experimental results on the constructed rice leaf disease dataset show that CED-RTDETR achieves AP, AP50, and AP75 values of 29.5%, 75.2%, and 17.6%, respectively, outperforming RT-DETRv2-R50 by 4.1, 4.9, and 3.8 percentage points. To further evaluate the model on an additional public benchmark dataset, experiments were also conducted on the public Rice Disease Dataset. On this dataset, CED-RTDETR achieves AP, AP50, and AP75 values of 34.1%, 77.1%, and 23.2%, respectively, improving upon RT-DETRv2-R50 by 4.3, 5.6, and 3.4 percentage points. These results indicate that the proposed method achieves consistent overall performance improvements on both the constructed dataset and the public benchmark dataset.
Why it matches plant phenotyping methodsイネ葉の病斑・病害を画像から検出する深層学習モデルを開発し、構築データセットと公開ベンチマークで性能検証しているため、植物病害状態のフェノタイピング手法が中心です。
abstractTo address the challenges posed by large lesion-scale variations, weak boundary cues, and high inter-class similarity in rice leaf disease detection, this study proposes an improved RT-DETRv2-R50-based rice disease detection model, termed CED-RTDETR.
Functional-structural plant models simulate plant responses to environmental conditions, but their development and evaluation are often limited by the lack of datasets combining detailed architectural and physiological measurements. Here, we present a comprehensive dataset acquired from four oil palm plants ( Elaeis guinnensis) grown under controlled and contrasting climate scenarios. The dataset includes (i) three-dimensional reconstructions of plant architecture derived from terrestrial lidar point clouds, (ii) leaf-level gas exchange measurements used to parameterize photosynthesis and stomatal conductance models, and (iii) continuous plant-scale measurements of CO 2 and H 2 O fluxes obtained in a microcosm under precisely monitored and manipulated environmental conditions (light, temperature, humidity, and CO 2 concentration) across height climate scenarios. By combining detailed structural data with physiological measurements at both leaf and whole-plant scales, this database has been designed to build and evaluate digital twins (or shadows) of plants functioning under controlled conditions. It provides a valuable resource for calibrating biophysical models (light interception and photosynthesis), benchmarking model predictions across scales, and investigating the consistency between leaf-level parameterization and plant-level fluxes. All data and processing workflows are openly available, facilitating reuse for model development, evaluation, and intercomparison in plant and crop modelling communities.
Why it matches plant phenotyping methods3D LiDARによる植物構造計測と生理計測を統合したデータセットで、モデルの較正・ベンチマーク・評価を主目的としており、植物フェノタイピング手法と再利用可能なワークフローが中心である。
abstractthree-dimensional reconstructions of plant architecture derived from terrestrial lidar point clouds
Plant diseases remain a threat to global agricultural productivity, food security and livelihoods, especially in developing countries where the availability of experts in agriculture is still limited. The recent progress in AI, particularly deep learning and computer vision, has ushered in new possibilities for automated plant disease diagnosis, especially for plant image-based systems. This paper provides a systematic review of the deep learning methods employed for plant disease diagnosis, highlighting CNN-based methods, the application of transfer learning, explainable AI (XAI) methods and deployment issues. In the framework of PRISMA 2020, the relevant peer reviewed literature from 2016 to 2025 was systematically identified, screened and analysed on the most important academic databases. The review compared some of the most popular architectures such as GoogLeNet, DenseNet-121, MobileNetV2, EfficientNet, Attention-CNNs and Vision Transformers. Results showed very high classification accuracy in controlled lab conditions with DenseNet-121 achieving ~99.75% accuracy with good computational efficiency. But it also revealed a big gap between the lab and the field, mainly due to environmental variations, domain shifts, and dependence on datasets. Some innovative and emerging technologies like explainable AI, hyperspectral imaging, few-shot learning, and lightweight mobile architectures showed promise of enhancing the interpretability, early detection of disease, and the use of smart phones in low-resource agricultural settings. In conclusion, the study suggests that in order to be implementable in the field, future intelligent agricultural diagnosis systems must be able to balance predictive accuracy, explainability, computational efficiency and field adaptability. The results enrich the existing knowledge on precision agriculture and serve as useful information for researchers, agricultural technologists, and policymakers working on the creation of AI-based systems for crop protection.
Why it matches plant phenotyping methods植物病害を画像から診断する深層学習手法を体系的に比較・レビューしており、植物の病徴・病害状態の推定方法が中心である。
abstractThis paper provides a systematic review of the deep learning methods employed for plant disease diagnosis
Reliable and objective phenotyping is essential for plant breeding programs to characterize genetic variation and accelerate crop improvement. Conventional disease assessment relies on expert visual scoring, which is labor-intensive, subjective, and prone to inter- and intra-rater variability. Although image-based phenotyping methods have been proposed, many require manual intervention, specialized imaging setups, or single time-point measurements, limiting their ability to capture disease progression over time. Here, we present a pipeline for longitudinal plant disease phenotyping that quantifies wheat stripe rust and leaf rust progression from time-series images. The pipeline performs semi-automated leaf and automated pustule segmentation from images acquired in situ , enabling objective disease severity estimation with minimal user intervention and without requiring solid backgrounds or manual leaf manipulation or detachment. By extracting temporal traits, including disease severity trajectories and standardized area under the disease progress curve, the method provides a comprehensive characterization of disease development throughout infection. Association between automated and expert assessments was moderate for stripe rust ( R 2 = 0.58) and strong for leaf rust ( R 2 = 0.85), while expert inter-rater reliability was moderate for both diseases (ICC = 0.675 and 0.800, respectively). The proposed approach establishes a scalable and reproducible framework for longitudinal disease phenotyping in controlled environments, with broad applications in disease resistance screening and crop breeding.
Why it matches plant phenotyping methods画像時系列から植物病害の進展と重症度を抽出する半自動・自動解析パイプラインを開発し、専門家評価との比較で検証しており、表現型取得手法が研究の中心です。
abstractHere, we present a pipeline for longitudinal plant disease phenotyping that quantifies wheat stripe rust and leaf rust progression from time-series images.
Reproduction assets foundThe paper's Code and Data Availability section explicitly states that software and datasets (the phenotyping pipeline and imaging datasets) are publicly available at the authors' GitHub repository and project website, both of which are in the allowed URL list.Code · publicSoftware and datasets are available at:
https://github.com/USask-BINFO/greenskeye_analysis and https://greenskeye.usask.ca/speedbreeding/ .Open asset ↗USask-BINFO/greenskeye_analysislines:195-225Dataset · publicSoftware and datasets are available at:
https://github.com/USask-BINFO/greenskeye_analysis and https://greenskeye.usask.ca/speedbreeding/ .Open asset ↗lines:195-225Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · checked 5 Sept 2026
Plant diseases lead to substantial yield losses and pose a persistent threat to global food security, creating an urgent demand for high-throughput, accurate, scalable, and non-destructive disease-monitoring approaches. Remote sensing has emerged as a powerful tool, yet progress in plant disease detection remains fragmented across various disciplines, tasks, sensing methods, and data modalities. This review introduces a hex-view perspective to synthesise remote-sensing-based plant disease detection within a cohesive conceptual framework. Instead of treating sensing technologies, algorithms, and datasets independently, the hex-view incorporates six interconnected dimensions that jointly capture how biological processes, the measurement scale, and data characteristics constrain disease detectability, including when detection is possible and how reliably it can be achieved. The hex-view framework comprises six interconnected dimensions and forms an integrated framework called BTSCAD: (1) Biology (B): plant–pathogen interactions constituting the biological foundation of disease development and expression. (2) Task (T): the diverse disease-detection tasks and their corresponding research objectives. (3) Sensor (S): the sensing modalities that define the data acquisition type and richness of captured information. (4) Condition (C): the environmental conditions, sensing platforms, and spatial scales that shape disease observations and bridge controlled experiments and real-world deployment across leaf, canopy, plot, and regional scales. (5) Algorithm (A): the classical and state-of-the-art data-analysis algorithms used to extract disease-related information from sensor data. (6) Dataset (D): the data sources that underpin model development, evaluation, and generalisability. The hex-view perspective provides a clear framework for interpreting previous research and identifying future research directions. This review lays a structured foundation for developing robust, interpretable, and transferable disease-detection systems, supporting advancements in precision agriculture, high-throughput phenotyping, and sustainable crop production.
Why it matches plant phenotyping methods植物病害を対象としたリモートセンシングによる病徴・病害状態の検出方法を、センサー、条件、アルゴリズム、データセットの観点から体系化する方法論レビューであり、植物フェノタイピング手法が中心です。
abstractThis review introduces a hex-view perspective to synthesise remote-sensing-based plant disease detection within a cohesive conceptual framework.
Localized soil-moisture deficits, that is, irregular sub-field patches where crops experience water stress well before visible wilting, are a leading cause of yield variability in row-crop agriculture. These zones are difficult to detect at the spatial resolution and revisit frequency required for timely irrigation response. This paper presents a reinforcement-learningguided autonomous quadrotor unmanned aerial vehicle (UAV) platform that fuses onboard Visual Simultaneous Localization and Mapping (Visual SLAM) with a pushbroom hyperspectral imaging payload to construct georeferenced, canopy-registered maps of a Crop Water-Stress Index (CWSI) in near real time. Rather than flying a fixed lawnmower survey, the platform is guided by an adaptive-sampling policy trained with Proximal Policy Optimization (PPO) that reallocates flight time and sensor dwell toward regions of emerging water stress as evidence accumulates mid-flight. We present the complete engineering pipeline: airframe and sensor design, a keyframe-based Visual SLAM front and back end that provides centimeter-scale geolocation without continuous reliance on Real-Time Kinematic (RTK) GNSS lock, a hyperspectral preprocessing and spectralindex chain (NDVI, NDRE, NDWI/NDMI) used to derive CWSI through a learned regression, the partially observable Markov Decision Process (POMDP) formulation and reward shaping used to train the sampling policy, and the fused system architecture tying these subsystems together. In simulated field trials over a 0.8-hectare test plot, the reinforcement-learning-guided policy achieved a 92% water-stress-zone detection rate versus 61% for a fixed-grid baseline, while reducing mission flight time by approximately 32%. We further report an ablation study isolating the contribution of SLAM-derived canopy structure to CWSI accuracy, a sensitivity analysis across field complexity, and a full error budget for the fused pipeline. We close with a discussion of validation limitations, broader scientific and agricultural impact, and a roadmap toward multi-UAV fleet deployment for whole-farm monitoring
Why it matches plant phenotyping methodsUAV、Visual SLAM、ハイパースペクトル画像、機械学習を統合し、作物の水ストレス状態を推定・地図化する技術パイプラインを開発・評価しており、植物表現型取得が中心である。
abstractThis paper presents a reinforcement-learningguided autonomous quadrotor unmanned aerial vehicle (UAV) platform that fuses onboard Visual Simultaneous Localization and Mapping (Visual SLAM) with a pushbroom hyperspectral imaging payload to construct georeferenced, canopy-registered maps of a Crop Water-Stress Index (CWSI) in near real time.
Abstract Satellite-based prediction of grain protein concentration (GPC) in wheat typically composites spectral observations over fixed calendar windows, implicitly assuming phenological synchrony across fields. We present a systematic evaluation of whether aligning multi-source remote sensing time series to field-specific, spectral-peak-relative windows improves field-level GPC prediction, for a quality trait whose physiology, senescence-linked nitrogen remobilization, contrasts with the season-integrating behavior of yield. Integrating Sentinel-2 imagery (31 vegetation indices, 10 spectral bands), ERA5-Land reanalysis, gSSURGO soil properties, and USGS 3DEP topography across 228 commercial winter wheat fields in western Kansas (2024–2025), we compared six temporal strategies (peakrelative vs. calendar × monthly, biweekly, growth-stage) using three ensemble tree models under nested cross-validation with Boruta feature selection. A single 30-day post-peak window (peak + [16,45] days) was the top-performing and most consistently selected window, chosen in 4 of 5 outer folds, reproducing prior accuracy under random cross-validation (R2 ≈ 0.28); though its advantage over the best calendar window was not statistically significant (paired bootstrap p = 0.08). Under leave-county spatial cross-validation, however, this skill did not transfer across counties (Sentinel-2–only R2 ≈ 0.01; per-county median R 2 = −0.23), indicating the satellite signal supports within-region interpolation but not spatial extrapolation to unseen counties; ablation shows that neither the spectral nor the static features transfer across counties on their own, and the residual crosscounty skill emerges only from their combination. A near-real-time application at ∼3 weeks before harvest retains most within-region skill at a modest accuracy cost. The results delineate where spectral-peak-relative alignment helps, concentrating a senescence-linked signal within region, and where it does not, providing an honest operational baseline for satellite-based grain-quality monitoring.
Why it matches plant phenotyping methods小麦の穀粒タンパク質濃度という植物形質を対象に、衛星時系列のスペクトルピーク相対アラインメントを開発・比較評価し、交差検証で性能と空間移 transfer 性を検証しているため、方法が中心的である。
abstractWe present a systematic evaluation of whether aligning multi-source remote sensing time series to field-specific, spectral-peak-relative windows improves field-level GPC prediction
Reproduction assets foundThe preprint explicitly releases the authors' analysis code (data-acquisition pipeline, feature engineering, cross-validation/modeling, figure scripts) at a public GitHub repository, and a de-identified field-level GPC dataset released alongside the code repository. Both are paper-specific, public, and actionable. The Code · publicthe figure-generation scripts is available at https://github.com/Ciampitti-Lab/Open asset ↗Ciampitti-Labpdf-page:48 lines:1-55Dataset · publica de-identified version of the dataset is released alongside the code repositoryOpen asset ↗pdf-page:48 lines:1-55Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Introduction Accurate classification of unsound wheat kernels is important for automated grain quality assessment, but improved recognition performance often comes at the cost of increased model complexity. Methods This study presents ECA-ModNet, a parameter-efficient convolutional network derived from EfficientNetV2-S. The architecture replaces two early-stage Fused-MBConv blocks with Mod-FusedMBConv blocks to introduce input-dependent local contextual modulation and replaces the squeeze-and-excitation modules in later stages with efficient channel attention to model local cross-channel interactions using fewer attention-related parameters. Experiments were conducted on the seven-class G600 wheat subset of the GrainSpace dataset. Results Across three independent runs, ECA-ModNet achieved an accuracy of 90.17 ± 0.21% and a macro-F1 score of 90.23 ± 0.21%, improving upon EfficientNetV2-S by 3.80 and 3.84 percentage points, respectively. The parameter count decreased from 20.19M to 16.49M, while FLOPs increased marginally from 2.90G to 2.95G. ECA-ModNet achieved accuracy statistically comparable to that of ConvNeXt-Tiny and InceptionNeXt-T while using substantially fewer parameters, and obtained 3.03-4.55 percentage points higher mean accuracy than six lightweight baselines. Discussion Ablation experiments identified two Stage 1 Mod-FusedMBConv blocks with a 3×3 context kernel as the configuration with the highest mean accuracy among those evaluated. These results indicate that ECA-ModNet offers a favorable accuracy-parameter trade-off for image-based classification of unsound wheat kernels.
Why it matches plant phenotyping methods小麦粒の状態（unsound kernel）を画像から分類するためのCNNを開発・比較・アブレーション評価しており、植物器官の状態推定手法が研究の中心である。
abstractThis study presents ECA-ModNet, a parameter-efficient convolutional network derived from EfficientNetV2-S.
Reproduction assets foundThe paper analyzes the public GrainSpace dataset (G600 seven-class unsound wheat kernel subset) and provides an explicit data availability statement with a public GitHub URL. No author analysis code or trained model deposit is stated.Dataset · publicPublicly available datasets were analyzed in this study. This data can be found here: https://github.com/hellodfan/GrainSpace .Open asset ↗hellodfan/GrainSpacelines:1035-1076Plant phenotyping relevance match · UnverifiedCrossref · checked 5 Sept 2026
Abstract Visual assessments of growing forest nursery plants are time-consuming and often result in a lack of information at a physiological level. There exists a need for health screening in nurseries, that is fast and efficient, to improve overall health monitoring and nursery productivity. Rapid handheld sensors such as rapid thermal devices, leaf porometers and moisture meters, can provide regular information at a physiological level, that can improve the understanding of the impact of stress on young plant cuttings and their decline in health over time. This paper evaluates the utility and reliability of contemporary sensor technologies, to operationally monitor stress phases in juvenile forest plant cuttings during progressive moisture (dry-down) conditions. Furthermore, to assess whether thermal sensors could be used as an indicator, in conjunction with other variables such as soil water content or stomatal conductance, is needed operationally for fast screening during limited planting windows. Near Infra-Red Analysis (NiRA) data was collected to understand detailed plant functions at a finer reflectance level. A relationship was found where the increase in thermal signals reflects a depletion of water content, resulting in an eventual decline in stomatal conductance and, ultimately, plant mortality. Several algorithms were used in a preliminary test, using RapidMiner software, to discriminate between the four phases of plant health decline using physiological variables and NiRA data. Both Gradient Boosting Trees (GBT) and Deep Learning (DL) showed the best performances, achieving favourable accuracies of 96.8% and 91.2% without NiRA data, 84.6% and 88.2% with NiRA data, with shorter training times. Using thermal technology weighted amongst the highest of the best performing variables using GBT, the utility and accuracy showed good discrimination between the stages of plant decline and is encouraged for future research in this field.
Why it matches plant phenotyping methods植物のストレス段階を熱センサー、ポロメータ、含水率計、NiRAおよび機械学習で測定・識別する方法の有用性と信頼性を評価しており、表現型取得・判定手法が中心である。
abstractThis paper evaluates the utility and reliability of contemporary sensor technologies, to operationally monitor stress phases in juvenile forest plant cuttings during progressive moisture (dry-down) conditions.
Field / plotLiDAR / point cloudWhole plant / canopy / plot / field2D/3D reconstructionYield / biomass estimationBiomass / plant weight
Reliable aboveground biomass (AGB) estimates for woody crops are essential for carbon accounting and for Measurement, Reporting and Verification (MRV) frameworks. However, it remains unclear how LiDAR modality and sampling geometry influence plot-scale and tree-scale AGB predictions in intensively managed Mediterranean orchards. In this study, we benchmarked four LiDAR modalities, namely open national airborne laser scanning from the Spanish National Aerial Orthophotography Plan (PNOA/ALS), a dedicated Riegl airborne laser scanner (ALS), unmanned laser scanning (ULS) and mobile laser scanning (MLS), across three woody-crop sites in Córdoba (southern Spain): IFAPA, Doña María, and Villaseca. Plot-level LiDAR metrics (mean height, 95th height percentile, maximum height, and canopy-cover proxies) were extracted from normalized point clouds and related to field AGB using Random Forest and XGBoost regression models, together with an ensemble predictor, under an 80/20 train–test split. In parallel, TreeQSM-based Quantitative Structure Models (QSMs) were evaluated as an independent tree-level three-dimensional reconstruction approach. XGBoost achieved the lowest errors at IFAPA (RMSE = 0.400 Mg ha−1; R2 = 0.994) and Villaseca (RMSE = 0.872 Mg ha−1; R2 = 0.995), whereas PNOA/ALS was competitive at Doña María (RMSE = 0.725 Mg ha−1; R2 = 0.994). TreeQSM closely matched the field inventory at the low-biomass IFAPA site but tended to overestimate biomass at Doña María and Villaseca, and only 28% of scanned trees yielded usable reconstructions. The results support the use of cross-platform LiDAR for orchard AGB and carbon mapping and identify the conditions under which open national LiDAR can enable scalable MRV of Mediterranean woody crops.
Why it matches plant phenotyping methodsLiDAR複数プラットフォームと3D再構成を比較・検証し、樹木・区画レベルの地上部バイオマスという植物形質を推定する手法が研究の中心である。
Abstract Understanding the allometric relationships between leaf area and other plant traits is essential for non-destructive growth monitoring and efficient crop management. However, no comprehensive study has yet modeled leaf area in quinoa ( Chenopodium quinoa Willd.) using simple morphological traits across different sowing dates. This study aimed to quantify allometric relationships between leaf area and plant height, leaf dry weight, stem dry weight, panicle dry weight, and total dry matter, and to evaluate whether these relationships are modified by sowing date. A two-year field experiment was conducted with 12 sowing dates under a randomized complete block design with three replications. Leaf area index (LAI) dynamics were described using a logistic model, and allometric relationships were fitted using power-law equations. The results showed that LAI followed a logistic trend across all sowing dates, with maximum values ranging from 2.7 to 7.9. Plant height provided the most reliable prediction of leaf area (R² = 0.83, b = 1.2), followed by leaf dry weight (R² = 0.72, b = 0.97). The allometric coefficients for stem dry weight (b = 1.54, R² = 0.74) and panicle dry weight (b = 1.95, R² = 0.71) showed greater variability. A striking finding was the exceptionally high allometric coefficient (b = 4.95) recorded on May 6 of the second year, indicating a pronounced shift in resource allocation toward leaf area expansion. Total dry matter was a weak predictor (R² = 0.54), likely due to leaf fall during the growing season. The hypothesis that sowing date modifies allometric relationships was confirmed, as evidenced by considerable variation in allometric coefficients across sowing dates. This study provides, for the first time, a comprehensive set of allometric models for quinoa across multiple sowing dates. Plant height and leaf dry weight are recommended as simple, rapid, and non-destructive indicators for leaf area estimation, facilitating improved crop monitoring and management under diverse environmental conditions.
Why it matches plant phenotyping methods草丈や乾物重から葉面積を非破壊推定するアロメトリックモデルを中心に開発・評価しており、植物形質の取得手法が実質的な主題である。
abstractThis study aimed to quantify allometric relationships between leaf area and plant height, leaf dry weight, stem dry weight, panicle dry weight, and total dry matter, and to evaluate whether these relationships are modified by sowing date.
Soil salinity is a major constraint on rice ( Oryza sativa L.) production, particularly during the yield-determining reproductive stage. Utilizing a high-throughput RGB platform, we non-destructively phenotyped a diverse panel of 294 rice accessions over two consecutive years. By extracting 60 dynamic image-based traits (i-traits) reflecting canopy architecture and stay-green capacity, and four seed-setting rate-related traits, our genome-wide association study (GWAS) identified 95 significant loci, 35.8% of which precisely co-localized with previously reported QTLs. We further prioritized OsSLT1 ( LOC_Os01g05790 ) as a candidate gene at a reproducible suggestive locus associated with leaf-rolling-related image traits. Transgenic evaluations confirmed that it acts as a positive regulator of salt tolerance at the seedling stage. OsSLT1 was mainly detected in the nucleus, and no significant changes in Na + or K + accumulation were observed in flag leaves under the tested salt-stress condition, suggesting that OsSLT1 may regulate salt tolerance through mechanisms beyond classical shoot ion accumulation. Natural variations in the OsSLT1 promoter were associated with transcriptional divergence. The Hap2 promoter haplotype showed significantly higher stress-induced transcriptional activity. Hap2 was rare in modern indica accessions, suggesting that it may represent a potentially useful genetic resource for future salt-tolerance improvement. Supplementary information The online version contains supplementary material available at 10.1007/s11032-026-01704-2.
Why it matches plant phenotyping methodsRGB高スループット基盤による非破壊画像計測と、60種の動的画像形質の抽出が研究の主要なデータ取得・解析手法として明示されているため、GWAS中心の応用研究でも植物フェノタイピング手法の実質的応用に該当する。
abstractUtilizing a high-throughput RGB platform, we non-destructively phenotyped a diverse panel of 294 rice accessions over two consecutive years.
Plant phenotyping is essential for modern crop breeding, yet traditional static image analysis fails to capture the nonlinear dynamics of plant growth. Existing time-series forecasting models exhibit notable limitations when processing multimodal data: global pooling operations may compress local 2D spatial topology of plants, and shallow feature concatenation may be insufficient for effective cross-modal semantic alignment. Moreover, current methods typically regress absolute morphological states, which may contribute to temporal lag during nonlinear growth spurts. In this paper, we propose ST-CrossGro-Former, a cross-modal residual forecasting framework for plant dynamic growth. The network removes the final global pooling and classification layers to preserve spatial topology and incorporates a scalar-guided cross-modal attention module based on the standard query-key-value formulation. This module utilizes 1D morphological features as queries to dynamically weight local visual regions, promoting multimodal feature alignment. Concurrently, a residual incremental forecasting strategy is introduced to predict short-term growth increments rather than absolute states, aiming to improve tracking sensitivity to sudden growth events. Evaluations on the UNL-CPPD maize dataset and supplementary validation on the FIP1 wheat field dataset show that the proposed model achieves competitive single-step forecasting accuracy and favorable temporal trajectory alignment compared with adapted spatiotemporal attention, graph-based, and physics-informed baselines under the evaluated settings. In particular, the FIP1 results suggest that ST-CrossGro-Former can maintain favorable height trajectory alignment under a field-acquired wheat setting, indicating its potential for helping mitigate temporal misalignment in dynamic growth forecasting.
Why it matches plant phenotyping methods植物の動的形態成長を予測する新規クロスモーダル手法を開発し、トウモロコシ・コムギデータセットで評価しており、表現型の抽出・予測手法が中心である。
abstractwe propose ST-CrossGro-Former, a cross-modal residual forecasting framework for plant dynamic growth.
Reproduction assets foundThe paper evaluates its ST-CrossGro-Former model on two public plant phenotyping datasets: the UNL-CPPD maize dataset (explicitly stated as publicly available with a repository URL) and the FIP1 wheat field dataset (public dataset from ETH Zürich, with its GigaScience dataset publication DOI). No author analysis code, Dataset · publicThe UNL-CPPD dataset used in this research was acquired from the UNL Plant Phenotyping Datasets repository, accessible at https://plantvision.unl.edu/datasets.Open asset ↗UNL Plant Phenotyping Datasets · UNL-CPPDlines:266-273Code / dataset availability confirmedOpenAlex · Crossref · checked 15 Sept 2026
Abstract Heat stress causes ultrastructural damage in pollen grains, leading to reduced pollen germination, pollen size and shortened pollen tube length, ultimately lowering seed set and yield. This study presents a high-throughput phenotyping framework that integrates controlled-environment pollen germination assays with deep learning–based object detection for rapid, accurate, and scalable evaluation of reproductive heat tolerance in soybean breeding programs. Sixteen soybean genotypes were grown under controlled environments at optimal (28/18°C; day/night) and high temperature (38/28°C; day/night) regimes during flowering. In vitro pollen germination was quantified using six YOLO (You Only Look Once) object-detection architectures (YOLOv7–YOLOv12) to identify the best-performing model for automated analysis. Among the tested object-detection architectures, YOLOv9 achieved the best overall performance for detecting germinated and non-germinated pollen grains in complex images. High temperature significantly reduced mean pollen germination from an average of 40% under optimal conditions to an average of 21% under heat stress (P < 0.05), with a significant genotype × growth temperature interaction. Invitro incubation temperatures ranging from 10 °C to 45 °C produced a clear thermal response; however, no significant genotype × incubation temperature interaction was detected within either growth temperature regime. Although photosynthetic and physiological traits were measured exploring their relationship with pollen germination, their transient and complex response limited their reliability for predicting reproductive performance. The automated pipeline substantially reduced the time required to evaluate pollen germination. The pipeline processed nearly 5,000 images in approximately one hour, substantially increasing throughput and reducing reliance on manual counting. The findings demonstrate that pollen germination is a promising proxy trait for screening reproductive heat tolerance in soybean. Combining controlled environment phenotyping with YOLO-based object detection enabled efficient, accurate, and scalable pollen analysis, and represents the central methodological advance of this study. YOLOv9 performed best among the tested architectures, although discrepancies from manual counts in some images indicate that additional validation is needed. The weak associations with vegetative physiological traits further support the value of direct pollen-based phenotyping.
Why it matches plant phenotyping methods深層学習による花粉画像解析を中心に、花粉発芽という生殖形質を高速・自動測定するハイスループット表現型解析フレームワークを開発・比較・検証している。
abstractThis study presents a high-throughput phenotyping framework that integrates controlled-environment pollen germination assays with deep learning–based object detection for rapid, accurate, and scalable evaluation of reproductive heat tolerance in soybean breeding programs.
Reproduction assets foundThe authors state that all data supporting the study, including annotated pollen germination images, computational and statistical codes, and analysis tools, were deposited in Zenodo with a public DOI. This is a paper-specific, publicly actionable asset. LabelMe and Ultralytics YOLO are generic third-party tools, not作者Dataset · publicCommission.
Data availability
All data supporting the findings of this study, including annotated images, computational and
statistical codes, and analysis tools, have been deposited in the Zenodo data repository. Additional
data will be made available upon reasonable request following acceptance of the manuscript.
Repository: https://doi.org/10.5281/zenodo.21685593
Ethics approval and consent to participate
Not applicable
Consent for publication
Not applicable
Competing Interests
Authors declared no competing interests
References
1. FAOSTAT: Crops and livestock products: soybean production data. https://www.fao.org/faostat/
(2022). Accessed 15 Feb 2026.
2. Patel D, Franklin KA. TemperaturOpen asset ↗Zenodo · 10.5281/zenodo.21685593pdf-raw-page:28 lines:1-34Code / dataset availability confirmedOpenAlex · Europe PMC · checked 15 Sept 2026
Boll-opening concentration is critical for mechanical cotton harvesting, yet it is still assessed mainly by manual records and single time-point indicators that miss temporal dynamics. To bridge the lack of a unified workflow linking vision foundation models, multi-temporal boll-opening monitoring, and harvest decision-making, we developed a cross-scale UAV high-throughput phenotyping framework centered on DINO-BollGX. DINO-BollGX couples a DINO v3 backbone, a RetinaNet detection head, and an adaptive refinement-and-suppression module for robust open-boll detection under complex field conditions. Using multi-temporal UAV imagery collected over two years for 383 cultivars, we reconstructed plot-scale time series of open-boll counts, derived dynamic features describing progression and intensity changes, and proposed a Cotton Boll-Opening Temporal Stability Index (CTSI) to quantify boll-opening rhythm and concentration; CTSI was further integrated with a time-based risk function to generate harvest decision curves. Under unified data and training settings, DINO-BollGX achieved precision = 0.91, F1 = 0.88, and AP@0.50 = 0.80, and provided accurate boll-count estimation (R 2 =0.98; MAE=3.10), outperforming YOLOv11, YOLOv12, YOLOv13, and RT-DETR. On an independent cross-year dataset acquired at 5 m altitude, it obtained precision = 0.98 and F1 = 0.87. An internal consistency analysis showed that CTSI had the expected negative association with Window_days (r = −0.83) and positive associations with Max_count (r = 0.78) and the boll-opening efficiency index (r = 0.92), reflecting the co-occurrence of temporal compactness and main-phase opening intensity in the cultivar population. CTSI ranged from −2.72 to 4.69 across cultivars, enabling identification of highly synchronized boll-opening. Harvest decision curves indicated that the relative net income index peaked at day 67 after the first observation and a compact optimal harvest window near the end of monitoring; on a fixed harvest date, Kuche 130292 (CTSI=4.69) produced 486 open bolls versus 182 for Xinluzao 36 (CTSI=0.53) and 90 for Andizhan-60 (CTSI=-2.72). Overall, the framework integrates dynamic boll-opening phenotyping with harvest timing optimization, supporting scalable cultivar screening and mechanization-ready deployment, with potential extension to harvest decision scenarios in other crops.
Why it matches plant phenotyping methodsUAV画像と基盤モデルを用いて綿花の開絮を検出・定量し、時系列表現型指標を構築・検証する方法が研究の中心であるため。
abstractwe developed a cross-scale UAV high-throughput phenotyping framework centered on DINO-BollGX.
Reproduction assets foundThe paper publicly releases its cotton boll-opening UAV image dataset (3638 patches, 94,774 YOLO-format bounding-box annotations) on GitHub, directly supporting the paper's phenotyping analysis. No author analysis code or trained model checkpoints are explicitly deposited.Dataset · publicentary information for evaluating cross-scale detection performance and characterizing macroscopic spatial patterns. The 5 m imagery acquired on 18 Sept 2024 is used exclusively for cross-year generalization assessment. All cropped images and the corresponding YOLO-format annotation files have been publicly released on GitHub ( https://github.com/mianchen0529/cotton-boll-dataset/tree/main ) to facilitate further research on cotton phenotyping, agricultural remote sensing, and intelligent analytics.
2.3.
Model construction
2.3.1.
Overall architecture of the DINO-BollGX network
The proposed DINO-BollGX network consists of four stages: image preprocessing, feature extraction, object prediction,Open asset ↗mianchen0529/cotton-boll-datasetlines:63-74Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Cercospora janseana (Racib.) O. Const. is a re-emerging fungal pathogen that causes Cercospora net blotch on rice. Previous research on resistance to C. janseana has primarily focused on foliar symptoms. Subsequently, sheath infection remains poorly characterized which hinders disease management efforts. This study developed and validated a reproducible sheath inoculation protocol under controlled conditions. Three inoculation methods (agar disc, spray, and drop) were evaluated with and without mechanical wounding. Lesions only formed with inoculation methods using wounding and the agar disc method produced the most consistent and uniform symptom development. Time-course analysis in the susceptible variety Cheniere revealed earlier lesion onset, more rapid expansion, and lower variability in the agar disc method compared to spray, confirming its suitability for phenotypic screening. The optimized protocol was applied across five independent trials involving four rice varieties. DG263L consistently exhibited minimal lesion development, confirming its resistance, while Cheniere showed extensive lesion growth, indicating high susceptibility. PVL03 and LaGrue displayed moderately susceptible reactions, with PVL03 developing significantly higher lesion lengths and AUDPC values than LaGrue in one-month-old plants. Although lesion onset was delayed in 45-day-old plants, disease progressed more rapidly once established. AUDPC analysis corroborated these trends, further distinguishing varietal responses. The protocol effectively discerned resistant, intermediate, and susceptible phenotypes, supporting its use in resistance screening. To our knowledge, this is the first controlled sheath inoculation method developed for Cercospora net blotch, offering a standardized approach for evaluating sheath-specific resistance and advancing the characterization of the C. janseana -rice pathosystem.
Why it matches plant phenotyping methodsイネ葉鞘の病斑を用いた抵抗性表現型の取得プロトコルを開発・検証し、品種間の病害表現型を再現性よく識別しているため、植物フェノタイピング手法が中心である。
abstractThis study developed and validated a reproducible sheath inoculation protocol under controlled conditions.
Recent 3D foundation models provide powerful feature representations for point cloud learning by controlling spatial granularity. However, relying on a fixed spatial granularity severely limits generalization in applications like plant phenotyping, where organ morphology and size vary substantially across species and growth stages. To address this, we propose AGS-PlantSeg, a few-shot 3D plant organ segmentation method that leverages the frozen Utonia (arXiv:2603.03283) foundation model combined with Adaptive Granularity Selection. By dynamically selecting the best granularity levels for each specific plant model, our method extracts optimized geometric features for a lightweight MLP segmentation head. Extensive experiments across PLANesT-3D (arXiv:2407.21150), Pheno4D , and Crops3D demonstrate that AGS-PlantSeg significantly improves cross-species generalization, achieving 88.9% average mIoU performance and outperforming fixed-granularity baselines by 2.5 mIoU points. Despite requiring minimal annotated data, our approach is highly competitive with fully supervised, plant-specific architectures.
Why it matches plant phenotyping methods植物器官の3Dセグメンテーション手法を開発し、複数の植物フェノタイピングデータセットで性能検証しているため、フェノタイピング手法が中心です。
abstractwe propose AGS-PlantSeg, a few-shot 3D plant organ segmentation method
The edible yield and commercial value of durian are strongly determined by the number of fully developed internal locules, yet their assessment still relies largely on subjective manual inspection or costly destructive analysis. Existing non-destructive approaches, including tapping-based evaluation and X-ray imaging, are either insufficiently standardized or impractical for high-throughput phenotyping. This study proposes the Rotation-Synchronized Structural Locule Evaluator (RS-SLE). The framework integrates convolutional spatial learning with deterministic signal processing to estimate internal locule number from rotational RGB imaging. The proposed system learns frame-wise spatial morphology using convolutional heatmap regression and performs temporal inference through deterministic kinematic signal processing over a mechanically bounded 360° rotation, thereby avoiding reliance on data-intensive recurrent video models. Specifically, sequential 2D locule-probability heatmaps are transformed into a synchronized 1D morphological energy signal, which is subsequently refined using gradient-based integration, Tikhonov regularization, and adaptive morphological thresholding to recover cycle-consistent structural peaks corresponding to fertile locules. This design provides a transparent and computationally efficient alternative to learned temporal memory while maintaining robustness to viewpoint variation, partial occlusion, and high-frequency spine noise. Evaluated on 260 fruits of the ‘Monthong’ cultivar, the proposed framework achieved a mean absolute error of 0.289 locules and a 71.1% exact-match rate on independent rotational videos. When combined with morphological correlation analysis, the framework attained a 100% tolerance accuracy (±1 locule) on the test set with destructive ground-truth measurements. These results demonstrate that dynamic external morphology can serve as a reliable optical proxy for internal locule development. Crucially, the final locule count is derived entirely from the CNN-generated one-dimensional morphological signal. This demonstrates the necessity of localized structural analysis over simple macroscopic shape indices. The findings highlight the value of explainable, kinematics-informed vision systems for practical precision agriculture.
Why it matches plant phenotyping methods回転RGB画像からドリアン内部のlocule数という植物器官状態を推定する画像ベース表現型計測法を開発し、独立動画と破壊的グラウンドトゥルースで検証しているため、方法が研究の中心である。
abstractThis study proposes the Rotation-Synchronized Structural Locule Evaluator (RS-SLE).
Image-based plant disease identification is essential for advancing smart agriculture, particularly for staple crops such as rice and economically significant crops such as tea, which are cultivated under complex environmental conditions. Furthermore, these crop groups present distinct challenges: rice leaf disease data typically exhibits clear pathological structures but necessitates large-scale deployment on resource-limited devices, whereas tea leaf disease data is complicated by variable lighting, diverse backgrounds, and high biodiversity. Although current deep learning models achieve high accuracy, they predominantly utilize deep convolutional neural network (CNN) architectures with millions of parameters, which hinders practical deployment on edge devices and increases the risk of overfitting when field data is scarce. In response, this study introduces DisQuan, a hybrid architecture that integrates classical deep learning with quantum machine learning (QML) to balance accuracy and resource efficiency. In particular, DisQuan combines the lightweight DisNet feature-extraction network with a variablequantum neural network to compress and refine feature representations in quantum space, yielding a model with only 0.09 million parameters. Experimental results on rice and tea leaf disease datasets indicate that DisQuan achieves the highest accuracy on the rice dataset and performance comparable to deep CNN models with significantly more parameters on the tea dataset, while maintaining a compact and stable structure. Overall, these findings suggest that DisQuan provides a practical compromise between performance and model complexity, and highlight the potential of quantum-classical hybrid architectures for plant disease detection in real-world agricultural settings and on resource-constrained devices.
Why it matches plant phenotyping methods植物葉の病害状態を画像から識別する量子・古典ハイブリッド手法を開発し、複数データセットで性能とモデル規模を評価しており、表現型取得・推定が中心である。
abstractExperimental results on rice and tea leaf disease datasets indicate that DisQuan achieves the highest accuracy on the rice dataset and performance comparable to deep CNN models with significantly more parameters on the tea dataset
In Nigeria, maize is the most widely cultivated grain, largely supporting food security for about half of the population. Research has indicated that there is annual production is declaiming to approximately 50% in maize, this is due to crop diseases and pest damage. This research presents a deep learning surveillance system for crop disease prediction and pesticides recommendations based on a DenseNet-121 architecture for continuous video streams. The research was evaluated on a curated field dataset collected from three states in Nigeria; Adamawa, Borno, and Taraba State. The system achieved a mean accuracy of 98.2% and a mean F1-score of 0.982. The results reflect a strong discriminative capacity across the diverse textural maize diseases.
Why it matches plant phenotyping methodsトウモロコシの病害状態を映像から推定する深層学習手法の開発・評価が中心であり、植物病害表現型の画像ベース計測に該当する。農薬推薦も含むが、病害分類性能が明示的に評価されている。
abstractThis research presents a deep learning surveillance system for crop disease prediction and pesticides recommendations based on a DenseNet-121 architecture for continuous video streams.
Key message Our scalable two-step method estimates genotypic performance and genetic parameters from ranking data, producing reliable results comparable to quantitative analyses, enabling the integration of ranking data into breeding pipelines. Plant breeding research has chiefly relied on on-station experiments to evaluate varietal performance. Nevertheless, these trials often fail to represent on-farm growing conditions and farmers' preferences, potentially leading to poorly defined breeding targets. Recent work has demonstrated the potential of using on-farm verification trials combined with ranking data to support farmers in evaluating varieties while providing information that is representative of farmers' needs. Despite this potential, scalable methods for quantifying genetic differences and assessing the strength of the genetic signal in such trials remain limited. Here, we present a two-step procedure for analyzing trials based on ranking data, allowing the estimation of genetic parameters. The approach follows a common strategy in quantitative genetics, in which parameters are estimated from tables of genotypic means and their variances. In our framework, these estimates are obtained from Thurstonian and/or Plackett-Luce models, which treat rankings as observations of an underlying continuous trait associated with genotypic performance. Using simulated data, we showed that genotypic mean estimates derived from ranking analyses are linearly related to those obtained from quantitative trait analyses and that their variances adequately capture estimation uncertainty. We further demonstrated that incorporating these estimates and their variances into a second-step mixed-effects model yields accurate estimates of variance components. Analyses of groundnut, maize, and sweetpotato datasets confirmed the applicability of the approach and showed that ranking data can provide reliable estimates of genetic parameters. We argue that this framework can be scaled to obtain genotypic performance estimates from multi-trial on-farm data.
Why it matches plant phenotyping methods作物品種の遺伝型性能をランキングデータから推定する統計的方法そのものが研究の中心であり、育種に再利用可能な植物性能の推定手法を開発・検証している。
abstractHere, we present a two-step procedure for analyzing trials based on ranking data, allowing the estimation of genetic parameters.
Reproduction assets foundThe paper's Data availability statement provides public access to the observed groundnut and sweetpotato ranking/trial datasets (Zenodo 17112492), the authors' R functions and simulation workflow (GitHub hdorado/tricot-ranking-analysis, archived Zenodo 17942919), and supplementary material with methods and figures (ZenDataset · publicThe observed data for groundnut and sweetpotato used in this study are publicly available and can be accessed at: Global multi-crop agricultural trial data supported by citizen science, Zenodo [ https://doi.org/10.5281/zenodo.17112492 ]Open asset ↗Zenodo · 10.5281/zenodo.17112492lines:205-225Code · publicThe R functions and simulation workflow used in this study are publicly available at: - Source code available from: [ https://github.com/hdorado/tricot-ranking-analysis ]Open asset ↗GitHub · hdorado/tricot-ranking-analysislines:205-225Code · public- Archived software available from: [ https://doi.org/10.5281/zenodo.17942919 ] - License: [MIT License]Open asset ↗Zenodo · 10.5281/zenodo.17942919lines:205-225Plant phenotyping relevance match · UnverifiedCrossref · checked 14 Sept 2026
Published17 Aug 2026NOUN Interdisciplinary Journal of Computing, E-Learning & Application (NOUN-IJCEA)Cited by 0 · OpenAlex ↗
Manual inspection of grain plant leaves for defects is subjective and labor-intensive. Few studies have compared deep learning methods on a combined multi-crop dataset. The study collected locally 5,640 leaf images from rice, maize, and guinea corn farms in Nigeria and grouped them into six classes representing defective and healthy leaves for each crop. Three models were trained: YOLOv8 for end-to-end detection and classification, EfficientNetB0 for standalone image classification, and a hybrid that used YOLOv8 for leaf detection followed by EfficientNetB0 for patch classification. The hybrid achieved 99.85% accuracy on the test set, slightly above EfficientNetB0 (99.82%) and YOLOv8 (mAP 0.995). The hybrid also supplies bounding box locations, helping farmers identify exactly where damage appears. This system offers a reliable, field-deployable tool for monitoring grain crop health.
Why it matches plant phenotyping methods穀物葉の健全・欠損状態を画像から検出・分類する深層学習システムの開発とモデル比較が中心であり、植物の病害・損傷状態を直接推定するため、植物フェノタイピング手法に該当する。
abstractManual inspection of grain plant leaves for defects is subjective and labor-intensive.
Rice seed vigor is a key determinant of germination performance and final crop yield, making its rapid and non-destructive assessment essential for seed quality evaluation. Conventional vigor detection methods are often destructive, labor-intensive, and time-consuming. Hyperspectral imaging provides a promising non-destructive alternative, but hyperspectral data are typically high-dimensional, redundant, and susceptible to noise and scattering interference. Moreover, existing models still have limited ability to discriminate subtle spectral differences among seed vigor levels. To address these challenges, this study proposes a gated recurrent unit (GRU)-guided closed-loop CNN-Transformer network (GCT-BCLN) for accurate, non-destructive identification of rice seed vigor. The model establishes bidirectional information flow between CNN and Transformer via the GRU, enabling dynamic and synergistic optimization of local spectral features and global spectral representations. In addition, a combined preprocessing strategy integrating adaptive iteratively reweighted penalized least squares (AirPLS), Savitzky-Golay (SG) smoothing, and multiplicative scatter correction (MSC) was adopted to improve spectral quality. Experimental results showed that GCT-BCLN achieved a test accuracy of 0.9795 for hybrid indica rice, outperforming the CNN-Transformer fusion model by 1.37%. The model also achieved accuracies of 0.9793 and 0.9758 on conventional japonica rice and glutinous japonica rice, respectively, showing consistent performance across the three evaluated variety-specific datasets under the controlled experimental protocol. These results support the feasibility of GCT-BCLN for laboratory-scale, non-destructive discrimination of aging-induced rice seed categories under controlled conditions, while practical application requires further external validation.
Why it matches plant phenotyping methodsイネ種子の活力という植物状態を、ハイパースペクトル画像と新規深層学習モデルで非破壊推定する手法開発が研究の中心である。
abstractthis study proposes a gated recurrent unit (GRU)-guided closed-loop CNN-Transformer network (GCT-BCLN) for accurate, non-destructive identification of rice seed vigor.
Plant phenotyping relevance match · UnverifiedbioRxiv · Europe PMC · checked 5 Sept 2026
Red crown rot of soybean (RCR), caused by Calonectria ilicicola, is an emerging soilborne disease whose quantification is challenging due to its complex symptom development across root and foliage levels. This study developed and evaluated a multi-scale framework to improve the assessment of RCR severity from controlled environments to field conditions using root imaging and standardized visual scales. Under controlled conditions, a standard area diagram (SAD) for root necrosis was developed and validated, and SAD-assisted evaluations significantly improved accuracy, precision, and inter-rater agreement compared with unaided assessments. In field conditions, a diagrammatic symptom scale (DSS) was developed using consensus-rated images from experts and showed high reliability, repeatability, and reproducibility across 18 raters, with strong intra- and inter-rater agreement. This study developed and evaluated complementary methods to improve the assessment of RCR severity from controlled environments to field conditions using root imaging and standardized visual scales.
Why it matches plant phenotyping methods根の壊死と地上部症状という植物病害状態の定量評価法を開発・検証しており、画像化と標準視覚尺度が研究の中心であるため。
abstractThis study developed and evaluated a multi-scale framework to improve the assessment of RCR severity from controlled environments to field conditions using root imaging and standardized visual scales.
Quantitative flowering phenotypes are needed to support breeding and harvest management in Hypericum perforatum L. (St. John’s wort), but manual flower assessment is slow and difficult to standardize under field conditions. UAV-Hyp is a multi-temporal UAV RGB dataset containing 12,653 high-resolution images acquired at 26 measurement dates across the complete flowering period of 15 H. perforatum accessions. The images represent variable illumination, soil moisture, weed pressure, and developmental stages. The dataset provides 59,163 plant bounding boxes and 107,054 flower bounding boxes. As an application example, cascaded YOLOv8 plant and flower detectors achieved mAP@0.50:0.95 values of 0.977 and 0.950, respectively. UAV-Hyp supports scalable flower quantification and the development of time-series phenotyping methods for genotype comparison and quality-oriented medicinal-plant breeding.
Why it matches plant phenotyping methods植物の開花形質を定量化するUAV画像データセットを提供し、検出性能も評価しているため、フェノタイピング用データセット・解析手法が中心です。
abstractUAV-Hyp is a multi-temporal UAV RGB dataset containing 12,653 high-resolution images acquired at 26 measurement dates across the complete flowering period of 15 H. perforatum accessions.
ArabidopsisCell / cellular structureRootPhysiological trait estimationGrowth / development / phenology
Decoding how plants integrate multiple hormone signals to coordinate growth requires tools capable of resolving pathway interactions at cellular resolution in living tissue. Here we present ACE (Auxin–Cytokinin–Ethylene) and ACE2 , proof-of-concept single-locus reporters to simultaneously capture activity of multiple hormones. Deploying ACE alongside well-established reporters, exogenous hormone treatments, and reverse-genetic perturbations of hormone biosynthesis, signaling, and transport in three-day-old etiolated Arabidopsis seedlings, we dissect the spatiotemporal hierarchy governing primary root elongation and root apical meristem (RAM) size. We demonstrate that both ethylene- and cytokinin-triggered root growth inhibition involve a boost of TRYPTOPHAN AMINOTRANSFERASE OF ARABIDOPSIS1 (TAA1)-mediated auxin biosynthesis and AUXIN RESISTANT1 (AUX1)-dependent auxin redistribution. Two spatially distinct auxin responses underlie the respective root growth effects: ethylene expands TAA1-dependent auxin biosynthesis from the root vasculature into the epidermis and promotes AUX1-mediated auxin import into the transition and elongation zones to inhibit cell elongation, while cytokinin confines ethylene-dependent TAA1-boosted activity to the vasculature and drives auxin accumulation in lateral root cap cells to reduce RAM size. Together, these data establish a reciprocal regulatory loop between these hormones, positioning ethylene as a convergence node in auxin–cytokinin crosstalk, and cytokinin as a modulator of the ethylene–auxin interaction. Critically, the changes in cross-activated reporter patterns described for different genetic backgrounds, alongside quantitative assessment of hormone-specific inhibition of the mutants’ growth, were consistent with the multi-hormone network established over two decades of research, and added cell-type-resolved spatial detail and a proposed hierarchy for the etiolated seedling root. Finally, a second-generation reporter, ACE2 , overcomes key technical limitations of ACE , expanding the platform’s capacity toward a higher-order multi-hormone monitoring system. These resources expand the Arabidopsis genetic toolkit and provide a generalizable framework instrumental for dissecting multi-hormone signaling hierarchies at the cellular level.
Why it matches plant phenotyping methods多ホルモン活性を生体組織で同時可視化するACE/ACE2レポーターを開発・改良し、遺伝背景や根成長阻害との整合性を検証しているため、植物フェノタイピング手法が中心である。
abstractHere we present ACE (Auxin–Cytokinin–Ethylene) and ACE2 , proof-of-concept single-locus reporters to simultaneously capture activity of multiple hormones.
Calibrating the mutagenic dose is the first practical step of any radiation mutation-breeding programme, and it is usually summarised by the median lethal dose (LD50) or the median growth-reduction dose (GR50). We asked whether an accessible, image-based phenotyping pipeline can quantify the early radiation response of cowpea (Vigna unguiculata L. Walp.) seedlings finely enough to estimate GR50 and to rank organ- and pigment-level sensitivities. Seeds of the traditional Paraguayan landrace kumandá pyta’i were exposed to Cobalt-60 gamma rays at 0, 100, 200, 300, 400, 500, 600, and 700 Gy, grown in a greenhouse, and photographed at the early seedling stage. A single calibrated photograph (5.1 px mm−1) of 83 seedlings was segmented in Fiji/ImageJ 1.54p and analysed with Python to extract morphometric traits (total, root, and shoot length, root:shoot ratio, tortuosity, and a two-dimensional biomass proxy) and colorimetric traits (CIE L*a*b*, a normalised greenness index, and colour-class pixel fractions). Because the data departed from normality, dose effects were tested with Kruskal–Wallis, Spearman rank correlation, and Dunn post hoc tests, and GR50 was estimated by regression of each trait expressed as a percentage of the control. Total length, shoot length, and the biomass proxy declined significantly with dose (Spearman ρ = −0.40, −0.51, and −0.47; all p < 0.001), preceded by a low-dose stimulation at 100 Gy. Estimated GR50 values were ≈390 Gy for shoot length, ≈510 Gy for total length, and ≈550 Gy for the biomass proxy, within the range reported for other cowpea genotypes. Shoot elongation was more radiosensitive than root elongation, so the root:shoot ratio did not decline; tortuosity showed no dose response. Among pigment traits, the loss of greenness was the most robust signal (a* increased, ρ = +0.62, p = 5 × 10−10; green pixel fraction fell from 0.32 to near zero by 500 Gy). These results show that single-photograph phenotyping resolves a coherent, statistically supported dose response and yields a GR50 estimate usable for dose calibration. For kumandá pyta’i, doses of roughly 300–400 Gy (below GR50) are the most defensible starting window for mutation induction. The framework is reproducible and low-cost, but it is based on one greenhouse experiment and a single genotype, and should be validated across independent trials and cultivars.
Why it matches plant phenotyping methods画像取得・セグメンテーション・解析による形態および色彩形質の抽出を中心に、放射線応答とGR50を推定する低コスト画像ベース表現型解析法を提示しているため。
abstractA single calibrated photograph (5.1 px mm−1) of 83 seedlings was segmented in Fiji/ImageJ 1.54p and analysed with Python to extract morphometric traits
Field / plotLeafSegmentationDisease symptoms / severity
Camellia oleifera leaf disease segmentation under natural field conditions is important for precision plant protection but remains challenging because lesions often show small target areas, blurred boundaries, uneven illumination, complex backgrounds, and coexisting symptoms. To address these problems, this paper proposes BFMambaNet, a Boundary-Frequency-guided Global Semantic Mamba Network for fine-grained disease segmentation. The model adopts an encoder-decoder framework and introduces a Global Semantic Mamba-based spatial selective feature modeling block to capture long-range lesion context and reduce semantic confusion. A gated wavelet spatial enhancement block is further designed to strengthen high-frequency boundary details while suppressing noisy responses. During training, boundary-frequency auxiliary supervision guides contour localization and pathological texture recovery without additional manual boundary labels. A reinforcement-learning-guided adaptive loss controller adjusts class-wise reweighting factors and loss-component weights according to the training state, improving optimization stability. A pixel-level dataset containing 1400 images and seven disease categories was constructed for evaluation. Experimental results show that BFMambaNet achieves 92.39% Precision, 91.43% Recall, 91.26% Dice, and 85.46% mIoU, outperforming representative CNN-based, Transformer-based, and Mamba-based models. Evaluations on environmental subsets confirm superior robustness, outperforming VMamba by 3.70% mIoU under uneven illumination, 3.55% mIoU under complex backgrounds, and 5.10% mIoU under coexisting symptoms. Cross-dataset validation on Apple leaf diseases further proves its generalization with 3.39% mIoU and 3.84% Dice improvements over U-Mamba, while maintaining a competitive inference speed of 30 FPS. Qualitative results also show clearer boundaries, fewer missed small lesions, and more stable predictions in complex field scenarios.
Why it matches plant phenotyping methods植物葉の病斑・病害状態を画像から画素単位で推定するセグメンテーション手法を開発し、データセット構築、性能評価、環境別評価、クロスデータセット検証まで行っており、病害フェノタイピング手法が中心である。
abstractA pixel-level dataset containing 1400 images and seven disease categories was constructed for evaluation.
Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · checked 15 Sept 2026
Abstract Probe-based spatial transcriptomics platforms use predefined oligonucleotide panels to detect selected RNAs in tissue sections while preserving transcript spatial coordinates. Accurate cell segmentation is required for reliable transcript-to-cell assignments. This analytical process is affected in plant tissues by cell walls, large vacuoles, and strong autofluorescence, which often reduce boundary contrast and elevate background. Nucleus-only segmentation with fixed-distance expansion can be an alternative approach, but it underestimates cellular area and morphology and reduces the number of assignable transcripts per cell. Here, we present a practical workflow for segmentation and downstream processing in plant probe-based spatial transcriptomics. Using the soybean nodule, soybean seed, rice root, and wheat inflorescence, we demonstrate the applicability of our workflow across species, tissues, and technological platforms. In brief, candidate cell masks are generated from available fluorescence signals and then selected and corrected using two napari plugins. Transcript-informed refinement with Baysor is included as an optional step. Upon benchmarking our approach using a collection of metrics (assignment yield, background/negative controls, and per-cell transcript/gene distributions) and linked segmentation choices to expression-matrix quality and downstream clustering, we demonstrate the potential of our workflow to support the analysis of plant probe-based spatial transcriptomics.
Why it matches plant phenotyping methods植物組織の細胞セグメンテーションとトランスクリプト割当てを改善する実用ワークフローを開発し、複数種・組織でベンチマークしている。植物形態そのものの測定ではないが、細胞レベルの空間状態を抽出する解析手法が中心である。
abstractHere, we present a practical workflow for segmentation and downstream processing in plant probe-based spatial transcriptomics.
Drought stress severely limits foxtail millet yield and quality, yet current drought-resistance indices are exclusively yield-oriented and ignore grain-filling quality. Our two-year (2024–2025) experiments with 24–48 varieties revealed that yield and blighted grain rate (BGR) are partially decoupled (e.g., Zhangzagu 18: yield 2307 kg/ha, BGR 0.444; Zhonggu 19: yield 1622 kg/ha, BGR 0.280). We therefore constructed the Yield–Quality Synergy Index (YQSI = DYI − BGR), which penalizes varieties with poor grain filling. The YQSI tied for first place with DYI in comprehensive screening performance and achieved the highest inter-annual stability (Spearman ρ = 0.823, Jaccard = 0.438, composite score = 1.261). Sensitivity analysis confirmed robustness of the equal-weight formula across a 4-fold range of quality-penalty weights. Six strongly drought-resistant germplasms with balanced yield and quality were identified. Using UAV multimodal data (RGB, multispectral, and thermal infrared) acquired during grain filling, a Random Forest model predicted a YQSI with overall R2 = 0.819 and an F1 score of 0.933 for variety screening. Feature-importance analysis highlighted NDVI, WDRVI, and red-edge texture as key predictors. This study provides a quality-constrained drought-resistance evaluation framework and demonstrates the potential of UAV-based high-throughput phenotyping for foxtail millet breeding.
Why it matches plant phenotyping methodsUAVのRGB・マルチスペクトル・熱赤外データから干ばつ耐性指標を予測する高スループット表現型解析手法が研究の中心であり、モデル性能も評価している。
abstractUsing UAV multimodal data (RGB, multispectral, and thermal infrared) acquired during grain filling, a Random Forest model predicted a YQSI with overall R2 = 0.819 and an F1 score of 0.933 for variety screening.
Introduction Applying general-purpose vision-language models (VLMs) to crop disease diagnosis presents three critical bottlenecks: reliance on large-scale annotated data, the high computational cost of full finetuning, and existing adaptation methods designed mainly for discriminative classification without sufficient visual-linguistic interaction for generative diagnosis. Methods We propose BLAP, an adaptive multi-scale visual prompt fine-tuning framework built upon BLIP-2. BLAP introduces an adaptive visual prompt fusion module (APFM) with learnable prompt vectors and a gating mechanism, together with a multi-scale pyramid feature fusion module (PFM). All BLIP-2 backbone parameters are frozen, and only 0.11% of the model parameters are optimized. Results On a few-shot dataset comprising 990 images from 11 crops and 33 disease categories, BLAP achieved 92.78% recognition accuracy, outperforming the BLIP-2+LoRA baseline by 21.67 percentage points. BLEU-4 and ROUGE-L scores reached 0.6507 and 0.7184, respectively, while inference latency increased by only 2.15%. Discussion BLAP provides a lightweight solution that balances accuracy, efficiency, and interpretability for crop disease diagnosis in resource-constrained settings. The proposed dynamic prompt fusion and multiscale pyramid adaptation strategy may also be extended to parameter-efficient fine-tuning of visionlanguage models in other domain-specific applications.
Why it matches plant phenotyping methods作物病害画像から病徴・病害状態を推定する視覚モデル適応手法BLAPの開発と評価が中心であり、植物病害フェノタイピング手法に該当する。
abstractWe propose BLAP, an adaptive multi-scale visual prompt fine-tuning framework built upon BLIP-2.
Reproduction assets foundThe paper's few-shot crop disease dataset (990 images, 11 crops, 33 classes) is compiled entirely from four public Mendeley Data image repositories, each cited in Table 1 as the data source for specific crop/disease classes. These are the plant image inputs directly used for this paper's phenotyping/analysis. No authorDataset · publicncluding laboratory and field environments (Approximately 45% of them were captured in field environments), to enhance sample representativeness and model robustness.
Table 1
The number of collected diseases or healthy image data for each crop.
Crop
Disease
No. of images
Collection conditions
Data source
Apple
Apple scab
30
Lab
https://data.mendeley.com/datasets/tywbtsjrjv/1
Cedar apple rust
30
Lab
https://data.mendeley.com/datasets/tywbtsjrjv/1
Healthy
30
Lab
https://data.mendeley.com/datasets/tywbtsjrjv/1
Cashew
Healthy
30
Lab
https://data.mendeley.com/datasets/8fr7grr73p/1
Leaf miner
30
Lab
https://data.mendeley.com/datasets/8fr7grr73p/1
Red rust
30
Lab
https://data.mendeley.com/datasets/Open asset ↗lines:37-116Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Existing reviews on AI in tea production are either agriculture-generic or limited to isolated tasks. This review thoroughly compares vision technologies (RGB, hyperspectral, near-infrared, thermal, Light Detection and Ranging (LiDAR), Unmanned Aerial Vehicle (UAV)) and establishes a task-oriented algorithm selection framework for the tea industry. For small-sample or near-linear problems, traditional machine learning (ML) (support vector machine (SVM); partial least squares regression (PLSR)) remains effective. For unstructured field tasks, deep learning achieves superior performance: pest detection accuracy exceeds 97%, tea bud detection reaches 96.8% with RGB images, and hyperspectral imaging predicts nitrogen content with R 2 > 0.90 and tea polyphenols with R 2 up to 0.925. Algorithm choice further differentiates by task granularity: lightweight convolutional neural networks (CNNs) balance speed and accuracy for edge deployment at 16 fps; You Only Look Once (YOLO) series detectors enable real-time localization on mobile platforms at 93.1% accuracy, 24 ms per target. No single algorithm dominates all tea tasks; selection is a trade-off among accuracy, speed, data availability, and computational constraints. These findings outline a structured analysis of the challenges and pathways for transitioning computer vision (CV) from laboratory research toward field-deployable tools.
Why it matches plant phenotyping methods茶作物の画像センシング技術と解析アルゴリズムを体系的に比較し、害虫検出や窒素含量予測など植物状態・形質の推定方法を扱う方法論レビューである。
abstractThis review thoroughly compares vision technologies (RGB, hyperspectral, near-infrared, thermal, Light Detection and Ranging (LiDAR), Unmanned Aerial Vehicle (UAV)) and establishes a task-oriented algorithm selection framework for the tea industry.
This study investigates the automatic classification of crop phenological stages from low-altitude UAV RGB imagery. The dataset included 11,489 images of five crops: sunflower, rapeseed, soybean, wheat, and barley. The images were annotated using the Biologische Bundesanstalt, Bundessortenamt und Chemische Industrie (BBCH) scale, with labels corresponding to either single stages or stage ranges to reflect heterogeneous field conditions and transitional crop states. A pretrained ResNet18 model was adapted to the task using transfer learning. Training was conducted in two stages: first, the classification head was optimized while the backbone remained frozen; second, the entire network was fine-tuned. The model achieved strong internal test accuracy across all crops, with 100% test accuracy for rapeseed and barley, more than 99% for the remaining crops, and a mean accuracy of 99.73% under the studied survey conditions. The results also compare favorably with previously reported studies on UAV-based phenological classification. Overall, the findings support the potential of low-altitude UAV imagery and deep learning for localized phenological assessment of selected field zones in precision agriculture, while broader deployment requires validation across independent fields, seasons, regions, and survey conditions.
Why it matches plant phenotyping methodsUAV画像と深層学習により作物の生育（フェノロジー）段階を自動推定する手法が研究の中心であり、植物状態の取得・分類に直接関わる。
abstractThis study investigates the automatic classification of crop phenological stages from low-altitude UAV RGB imagery.
Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · checked 15 Sept 2026
Summary Understanding how plant populations respond to environmental variation through functional leaf traits remains challenging due to limitations of traditional phenotyping approaches. Hyperspectral reflectance offers a powerful high‐throughput solution, simultaneously capturing leaf biochemistry, water content, and structural properties across hundreds of wavelengths. We present a framework combining hyperspectral data, inverse modeling, and network analysis to investigate population‐level variation in Streptanthus tortuosus . Using a common garden experiment with four populations, we apply supervised methods (partial least square discriminant analysis; ridge regression) to identify which spectral features differ among populations, and an unsupervised spectral network approach to characterize how wavelength correlations are organizationally structured within each population, where we treat coordination architecture itself as a population‐level phenotype that can vary with environment. The framework detects distinct, heritable spectral signatures across populations, population differences in anthocyanins, carotenoids, Chl, water content, and population‐specific network architectures. Thermally variable environments were associated with greater spectral modularity, demonstrating that trait coordination architecture varies with climate of origin. This approach addresses the phenotyping bottleneck in evolutionary ecology, providing a scalable, high‐throughput tool for characterizing genetically based population differences in both individual traits and their coordination, with broad applications for monitoring plant population responses to climate change.
Why it matches plant phenotyping methodsハイパースペクトル計測、逆モデリング、ネットワーク解析を統合し、葉の機能形質と形質協調構造を植物表現型として抽出する手法が研究の中心である。
abstractHyperspectral reflectance offers a powerful high‐throughput solution, simultaneously capturing leaf biochemistry, water content, and structural properties across hundreds of wavelengths.
Accurate field detection of candidate tea shoots could support plantation monitoring, yield estimation, fresh-leaf assessment, and future selective-harvesting research. Wuyi rock-tea shoots are small and slender, have weak visual boundaries, and are easily confused with branches, petioles, and complex canopy backgrounds. Here, we developed YOLO11s-CSNG for candidate shoot detection in natural plantation scenes. The model combines a channel-spatial feature enhancement bottleneck, a normalized Wasserstein distance constraint for bounding-box regression, and ghost convolution layers in the detection head. We evaluated the model through detector comparisons, module ablations, and repeated training with five matched random seeds on a natural-scene dataset containing four Wuyi rock-tea cultivars. Across the five matched seeds, the mean mAP@0.5 increased from 67.37 ± 0.91% to 67.97 ± 0.90% on the validation set and from 61.29 ± 0.40% to 61.88 ± 0.66% on the internal test set. Neither paired difference was statistically significant: The 95% confidence intervals included zero, and the exact two-sided paired-permutation p values were 0.375 and 0.250, respectively. The mean mAP@0.5:0.95 did not improve. YOLO11s-CSNG retained a model size and model-only edge-inference time comparable to YOLO11s, providing a compact design for candidate shoot-region detection under the sampled field conditions.
Why it matches plant phenotyping methods茶芽という植物器官の画像検出手法を開発し、比較・アブレーション・反復検証を行っているため、植物フェノタイピング手法が中心である。
abstractHere, we developed YOLO11s-CSNG for candidate shoot detection in natural plantation scenes.
Photosynthesis is among the most consequential yet genetically complex traits in crop plants, and translating its natural variation into actionable genomic targets remains a central challenge for breeding climate-resilient varieties. To start addressing this, researchers are generating increasingly large, multi-environment field photosynthesis datasets. Yet, these data have been structurally under-analysed since their inception. Here we report the outcomes of the first dedicated hackathon focused on computational mining of such field data held in Accra, Ghana, in March 2026. Bringing together data scientists, plant physiologists, geneticists, and breeders from Europe and Africa, these interdisciplinary teams used photosynthetic data collected with hand-held fluorometers to genome-wide marker data across four crop species: cowpea (Vigna unguiculata), barley (Hordeum vulgare), common bean (Phaseolus vulgaris), and potato (Solanum tuberosum). Despite using different species and methods, independent teams identified the same three key findings. First, mechanism-informed feature engineering and dynamic modelling recover genetic signals that are not detected or discarded in standard analysis pipelines, resulting in traits with improved heritability and meaningful associations with yield. Secondly, machine learning methods proved effective at uncovering genetic associations, with temporally resolved features substantially outperforming single time-point measurements. Third, raw chlorophyll fluorescence and absorbance traces consistently contained more information and predictive power than the extracted parameters currently used. A defining feature of this event was having experimentalists and data scientists working together, enabling AI approaches to be grounded in domain knowledge and biological mechanisms rather than relying on data alone.
Why it matches plant phenotyping methods圃場光合成データから時間分解特徴量や遺伝的シグナルを抽出する計算手法を中心に扱っており、植物生理形質の実質的なフェノタイピング手法応用に該当する。
abstractmechanism-informed feature engineering and dynamic modelling recover genetic signals that are not detected or discarded in standard analysis pipelines, resulting in traits with improved heritability and meaningful associations with yield.
Continuous X-ray computed tomography (XCT) combined with digital volume correlation (DVC) is presented to quantify internal three-dimensional strain and failure dynamics in apple cortex tissue during compression, revealing how the cellular microstructure governs its mechanical response. We introduce a dimensionless number Mi that is a function of the average interfacial contact area of cells, cell wall thickness, the average cell volume and tissue porosity, to describe tissue microstructure over different development stages. Mechanical softening during maturation aligned strongly with decreasing Mi, linking microstructure to effective Young's modulus, peak stress, and toughness. DVC revealed distinctive strain-distribution signatures: in young, low-porosity tissue, strain was initially diffuse with early-onset localization indicating progressive failure, whereas mature, high-porosity tissue exhibited sharply peaked strain distributions and highly localized fracture planes indicative of brittle collapse. These findings demonstrate how pore evolution, anisotropy, and cell packing jointly determine macroscopic deformation, establishing XCT-DVC as a powerful framework for connecting plant tissue architecture to mechanical function.
Why it matches plant phenotyping methods4D XCTとDVCを用いてリンゴ組織の内部三次元ひずみ、微細構造、破壊状態を定量化する手法が研究の中心であり、植物組織の構造・力学的状態を抽出しているため。
abstractContinuous X-ray computed tomography (XCT) combined with digital volume correlation (DVC) is presented to quantify internal three-dimensional strain and failure dynamics in apple cortex tissue during compression
Why it matches plant phenotyping methodsトマト葉の病害を画像と深層学習で検出する手法が題名上の中心であり、植物の病害状態を観察的に推定するフェノタイピング研究に該当する。
titleDetection of Tomato Leaf Disease in Leaves with Deep Learning MobileNetV2 with Gaussian and Gabor Preprocessing
Reproduction assets foundThe paper's phenotyping analysis is based on the publicly available PlantVillage plant leaf disease image dataset hosted on Kaggle (54,303 labeled leaf images across 38 classes), which the authors explicitly state was sourced from a publicly available Kaggle dataset. No author-specific code, models, or derived datasetsDataset · publicThe research incorporated PlantVillage dataset(24)
accessible on Kaggle that contains 54,303 plant leaf
images showing both healthy and diseased
conditions spanning across 38 specific categories.Open asset ↗Kagglepdf-raw-page:2 lines:1-105Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Published17 Aug 2026Growth hormone & IGF research : official journal of the Growth Hormone Research Society and the International IGF Research SocietyCited by 0 · OpenAlex ↗
Background ecombinant human growth hormone (rhGH) has been used for four decades under a largely population-based dosing paradigm, yet growth response varies substantially among children with apparently similar auxological phenotypes. Advances in genomics, GH-insulin-like growth factor-1 (IGF-1) axis biomarkers, mathematical and machine-learning (ML) prediction models, and digital health technologies now allow individualized characterization of growth disorders, forming the basis of an emerging precision-endocrinology paradigm. Objectives (1) to synthesize evidence on monogenic and polygenic genetic determinants of pediatric growth faltering and/or short stature and their diagnostic yield; (2) to evaluate GH-IGF-1 axis biomarkers and pharmacogenetic markers, including the IGF-1/IGFBP-3 molar ratio as a likely better indicator of bioactive IGF-1 than IGF-1 alone, together with mathematical/ML prediction models, for individualizing rhGH therapy; and (3) to appraise artificial intelligence (AI) and digital-health tools, bone-age algorithms, facial-recognition phenotyping, adherence-prediction models, and smartphone growth-monitoring, as instruments for operationalizing precision endocrinology in children and adolescents with growth disorders. Methods This is a systematic review employing narrative synthesis (a systematic scoping review). Reporting explicitly followed the PRISMA Extension for Scoping Reviews (PRISMA-ScR) checklist rather than the PRISMA 2020 statement for systematic reviews and meta-analyses, because the heterogeneous outcome metrics across genetic, diagnostic-accuracy, prediction-model, and AI/digital-health studies preclude meta-analytic pooling of a single quantitative effect size; PRISMA-ScR is the methodologically appropriate reporting framework for a review mapping evidence across such conceptually distinct domains. PubMed/MEDLINE was searched for English-language, pediatric (0-18 years) studies published between 2000 and 2026. Two-stage screening (title/abstract, then full text) was performed. Quality was appraised using design-appropriate tools: an adapted Newcastle-Ottawa Scale for genetic-association studies, QUADAS-2 for diagnostic-accuracy biomarker studies, PROBAST/TRIPOD-informed criteria for prediction-model and ML studies, and reference-standard/external-validation criteria for AI-imaging studies. Sixty-two studies were retained for qualitative synthesis. Results Monogenic defects (SHOX, ACAN, NPR2) and exome-sequencing panels explain a meaningful minority (approximately one-quarter) of previously "idiopathic" short stature, while genome-wide association studies and polygenic scores capture a substantial share of the remaining heritable variance, with polygenic risk scores achieving areas under the receiver-operating-characteristic curve up to 0.84 for predicting adult short stature. The IGF-1/IGFBP-3 M ratio outperforms IGF-1 alone for diagnosing GH deficiency (sensitivity 87.5%, specificity 83.0%), reflecting the greater bioavailability of free, unbound IGF-1 relative to that carried in the ternary IGF-1/IGFBP-3/acid-labile-subunit complex. GH-receptor exon-3 (d3) pharmacogenetic variants and machine-learning models (random forest, transcriptomic classifiers) improve prediction of individual rhGH response beyond classical mathematical models. AI-based bone-age algorithms achieve near-radiologist accuracy with reduced inter-observer variability, computer-aided facial-phenotyping tools show comparable diagnostic accuracy for syndromic short-stature disorders such as Noonan and Turner syndrome, and connected-device/ML adherence-monitoring and smartphone growth-tracking tools objectively detect suboptimal adherence and growth faltering earlier than conventional clinic-based surveillance; network meta-analyses of once-weekly long-acting rhGH formulations further suggest that reduced injection burden can translate into modestly improved height outcomes relative to daily rhGH. These findings are synthesized into a Precision-Medicine Cascade, a practice-oriented framework showing how genotype, biomarker, and digital data streams can be layered onto routine auxological assessment to guide same-visit clinical decisions on diagnostic work-up, dosing, and monitoring frequency. Conclusion Converging genetic, biomarker, computational, and digital-health evidence supports a feasible, evidence-grounded trajectory toward individualized therapy, including rhGH and emerging growth-plate-targeted agents, in pediatric growth disorders. The Precision-Medicine Cascade proposed here offers pediatric endocrinologists an immediately applicable framework for integrating these tools into everyday practice. However, current tools remain adjunctive rather than replacement for clinical judgment, and prospective, ethnically diverse validation of integrated precision-endocrinology pathways is required before routine adoption.
Why it matches plant phenotyping methods植物ではなく小児成長障害を対象とするため通常の植物フェノタイピング索引には不適合だが、提示基準上の「plant」要件を満たさないため本来は除外。ただしレビュー自体はAI画像・成長モニタリング等のヒト表現型手法を中心的に扱う。
Why it matches plant phenotyping methodsブドウ葉ディスク上のべと病症状を画像から自動分割し、病害重症度を推定する手法を開発・検証しており、植物表現型取得が中心である。
abstractWe developed SporaScan, an automated pipeline combining YOLO v8n for leaf disc localization, Mobile SAM for background removal, and UNet for sporulation segmentation.
Sustainable crop improvement is urgently needed to ensure global food security, particularly for developing and densely populated countries. The integration of artificial intelligence (AI) and machine learning (ML) into crop science tri typing is reshaping the conventional agriculture practices into an era of high-throughput phenotyping (HTPP) data-driven modern agriculture. AI tools accelerate data generation, mining, imputation, storage, transfer, and optimal decision-making within agricultural systems. AI tools are paving the way for modern plant breeding strategies by uncovering genetic variability and bridging the genotype-to-phenotype (G2P) gap, thus enabling the future of predictive breeding. Plant genetic gains or phenotype (P), by and large, depend on the genotype (G), environment (E), and their interaction (GEI). This review will provide a comprehensive overview of the historical background, current status, and prospects for integrating AI and ML tools in agricultural tri-typing, encompassing genotyping, phenotyping, and envirotyping. We explore AI-driven tools for genome analysis, HTPP platforms, and environmental data integration, emphasizing how these technologies overcome persistent bottlenecks in predictive breeding. Furthermore, this review will offer the reader key insight into modern trends, including the paradigm shift in phenomics patent filings, global distribution of HTP phenomics facilities, the publications volume and related research over the last two decades, and individual institutions currently leading or prospectively will lead the world in plant phenomics. Similar to plant phenotyping, we also try to address the integration and application of AI/ML algorithms in plant genotyping and envirotyping. Supplementary information The online version contains supplementary material available at 10.1007/s11032-026-01705-1.
Why it matches plant phenotyping methods植物フェノタイピング、ハイスループットフェノタイピング、AI/MLツールを中心に扱う包括的レビューであり、方法論レビューとして該当する。
abstractThis review will provide a comprehensive overview of the historical background, current status, and prospects for integrating AI and ML tools in agricultural tri-typing, encompassing genotyping, phenotyping, and envirotyping.
Stomatal traits are key microscopic phenotypes for evaluating plant physiology, stress responses, and crop breeding potential. However, in vivo high-magnification microscopy often suffers from a shallow depth of field, causing noticeable defocus blur across different spatial locations and making it difficult to capture clear and complete stomatal structures in a single image. Multi-focus image fusion offers a practical solution, yet existing methods typically rely on supervised training, paired data, or hand-crafted rules, limiting their use in real agricultural microscopy scenarios. In this study, we propose an unsupervised multi-focus fusion framework for reconstructing fully focused stomatal microscopic images. The method integrates two-dimensional feature extraction with three-dimensional cross-focal-plane modeling to capture both spatial details and complementary information across focal planes. A max-response-guided spatial gating module is introduced to enhance focused regions while suppressing defocused responses. Additionally, dual sharpness priors based on perceptual features and wavelet high-frequency information enable pixel-wise pseudo-supervised learning without requiring all-in-focus ground-truth images. The model also predicts a probabilistic focal-plane volume for interpretable all-in-focus reconstruction. Experiments on a maize multi-focus image dataset demonstrate that the proposed method achieves superior or competitive performance across multiple fusion metrics, with entropy (EN), edge information preservation ( Q AB∕F ), Chen-Blum contrast metric ( Q CB ), and visual information fidelity for fusion (VIFF) reaching 7.43, 0.21, 0.41, and 1.01, respectively. Ablation studies confirm the effectiveness of the 3D modeling, spatial gating, and dual-prior sharpness supervision. More importantly, when the fused images serve as input to a YOLO-based stomatal instance segmentation model, the proposed method yields the best segmentation accuracy, with mAP50 and mAP50-95 reaching 0.9937 and 0.9121, respectively. Phenotypic measurements derived from the segmentation masks show high consistency with manual annotations, with the highest coefficient of determination R 2 = 0.97 achieved for stomatal count. These results indicate that the framework can act as an effective front-end module for automated microscopic stomatal phenotyping in agriculture.
Why it matches plant phenotyping methods植物の気孔表現型を対象に、マルチフォーカス画像融合、セグメンテーション、形質測定までを中核的に開発・検証しているため。
abstractwe propose an unsupervised multi-focus fusion framework for reconstructing fully focused stomatal microscopic images.
Reproduction assets foundThe authors state their data and code are publicly available on GitHub, covering the multi-focus stomatal microscopy dataset and the UMF-stomata fusion/phenotyping code.Code · publicOur data and code are available at: https://github.com/Longer-S/UMF-Stomata.Open asset ↗Longer-S/UMF-Stomatahtml-lines:640-655Dataset · publicOur data and code are available at: https://github.com/Longer-S/UMF-Stomata.Open asset ↗Longer-S/UMF-Stomatahtml-lines:683-756Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · checked 14 Sept 2026
Photosynthesis is the fundamental biological process underlying plant growth, crop productivity, and global food security. However, its efficiency is highly vulnerable to abiotic stresses, which disrupt chlorophyll biosynthesis, electron transport, carbon assimilation, stomatal regulation, and photoprotective mechanisms, ultimately reducing crop yield. Improving photosynthetic resilience under adverse environments has therefore become a major objective of modern crop improvement. Recent advances in phenomics and high-throughput phenotyping (HTP) have transformed the evaluation of photosynthesis-related traits by enabling rapid, non-destructive, and large-scale assessment across diverse environments, while facilitating quantitative characterization of structural, physiological, biochemical, and thermal responses to abiotic stress. Technologies including chlorophyll fluorescence, gas-exchange analysis, thermal imaging, hyperspectral imaging, LiDAR, and UAV-based sensing provide comprehensive insights into plant physiological responses and stress adaptation. Integration of these phenomic approaches with genomic information and artificial intelligence (AI)-driven analytical frameworks has strengthened genomic and phenomic prediction, enabling more accurate identification of candidate genes, selection of superior genotypes, and accelerated genetic gain. This review critically synthesizes recent advances in photosynthesis-related traits, phenomics, HTP technologies, and their integration with genomics and AI-assisted breeding, highlighting current challenges, knowledge gaps, and future opportunities for developing climate-resilient wheat and rice cultivars and promoting sustainable crop production.
Why it matches plant phenotyping methods植物の光合成形質を対象に、HTP技術やセンサー手法を体系的にレビューしており、フェノタイピング手法が中心である。
abstractThis review critically synthesizes recent advances in photosynthesis-related traits, phenomics, HTP technologies, and their integration with genomics and AI-assisted breeding
ABSTRACT The present study evaluated the applicability of Portable X‐ray Fluorescence (pXRF) for rapid determination of seed mineral concentrations in cowpea [ Vigna unguiculata (L.) Walp.] by comparing pXRF measurements with those obtained using Atomic Absorption Spectroscopy (AAS). Fifty‐seven cowpea genotypes, including two check varieties, were analysed for iron (Fe), zinc (Zn), manganese (Mn), copper (Cu), potassium (K), and calcium (Ca). Simple linear regression was used to assess the relationship between pXRF‐ and AAS‐derived mineral concentrations using training ( n = 47) and independent validation ( n = 10) datasets. The pXRF measurements showed good agreement with the corresponding AAS values for both macro‐ and micronutrients, with comparatively stronger relationships observed for Fe, Zn, Mn, and Cu. Residual and normal Q–Q plot analyses supported the suitability of the regression models. The findings demonstrate that pXRF enables rapid, simultaneous multielement analysis with minimal sample preparation and provides an efficient approach for high‐throughput mineral phenotyping and biofortification‐oriented cowpea breeding programmes.
Why it matches plant phenotyping methodspXRFによる種子ミネラル形質測定をAASと比較し、独立検証データで妥当性を評価しており、鉱物フェノタイピング手法が中心である。
abstractThe present study evaluated the applicability of Portable X‐ray Fluorescence (pXRF) for rapid determination of seed mineral concentrations in cowpea
Abstract Cross-sectional analysis is considered the reference method for measuring cotton fiber fineness and maturity; however, its widespread use has been limited by labor-intensive sample preparation and manual image analysis. The objective of this study was to develop and validate a reproducible deep-learning-based workflow for automated segmentation and quantitative analysis of cotton fiber cross-sections. A total of 249 composite light microscopy images of cotton fiber cross-sections were collected and manually annotated to generate training and validation datasets. A YOLO11m instance segmentation model was developed to identify cotton fiber and lumen regions and automatically extract quantitative traits, including fiber area, lumen area, fiber perimeter, and lumen perimeter. The workflow integrates automated image segmentation, post-processing, quantitative trait extraction, and data export to facilitate reproducible cotton fiber phenotyping. Model performance was evaluated using mean Average Precision (mAP), and workflow outputs were validated against Adobe Photoshop using descriptive comparisons of six cross-sectional traits. The model achieved Box mAP50 scores of 0.984 for cotton fiber regions and 0.789 for lumen regions, demonstrating high segmentation accuracy. The automated workflow substantially reduced manual analysis time while producing measurements with central tendencies comparable to those obtained using Adobe Photoshop. To facilitate reproducibility and adoption, the workflow, trained model weights, and supporting documentation are publicly available through GitHub and a Hugging Face web application. The workflow substantially increases analytical throughput while providing a reproducible and publicly accessible method for automated cotton fiber cross-sectional phenotyping, facilitating quantitative analysis for cotton genetics and breeding research.
Why it matches plant phenotyping methods綿繊維横断面の画像分割、形質抽出、検証を目的とした再現可能な深層学習ワークフローの開発であり、植物フェノタイピング手法が研究の中心である。
abstractThe objective of this study was to develop and validate a reproducible deep-learning-based workflow for automated segmentation and quantitative analysis of cotton fiber cross-sections.
Reproduction assets foundThe paper's cotton fiber cross-section phenotyping workflow (YOLO11m segmentation pipeline, trained model weights, example images/outputs) is explicitly stated as publicly available via a GitHub repository and a Hugging Face web application, with URLs matching the allowed list.Code · publicThe complete source code, training scripts, dataset configuration, example input images, example outputs,
and supporting documentation are publicly available through the GitHub repository:
https://github.com/RifeLab/cotton-lumen-microOpen asset ↗RifeLab/cotton-lumen-micropdf-page:11 lines:1-47Code · publicThe cotton fiber image analysis workflow is publicly available through a web-based application hosted on
Hugging Face at: https://huggingface.co/spaces/chaneylc/cotton_fiber_microscopy_measureOpen asset ↗pdf-page:11 lines:1-47Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Field / plotMultispectral / hyperspectralClassificationGrowth / time-series analysisGrowth / development / phenology
Aquatic plants are vital for lake ecosystem functioning and water-quality stability, yet their community dynamics and phenology rhythms remain insufficiently understood, due to the lack of effective strategies for fine-scale species mapping and phenology extraction. In this study, based on Sentinel-2 MSI imagery, we developed an integrated framework combining machine learning and a priori ecological knowledge to quantify the spatiotemporal changes in aquatic plant distribution, species composition and phenological dynamics for eight dominant species in five regulating lakes along the Eastern Route of the South-to-North Water Diversion Project in China. Results showed that the proposed framework enabled accurate aquatic plant identification, achieving an overall classification accuracy of 96.16% and over 90% accuracy for each species. Since 2016, aquatic vegetation coverage has substantially declined in most lakes, mainly due to the retreat of submerged vegetation. Community structure has shifted from submerged-plant dominance to emergent and floating-leaved dominance in two of them. Phenologically, we found that most aquatic vegetation exhibited a longer growing season, characterized by earlier growth onset (-0.28 days/year) and peak timing (-0.67 days/year) and delayed senescence (0.54 days/year). Correlation analysis indicated that aquatic vegetation dynamics was associated with climate variation, nutrient enrichment, turbidity, and water diversion, with warming and solar radiation likely promoting the growth of some emergent species, while nutrient enrichment and turbidity could be linked with submerged vegetation decline and earlier phenological shifts. Overall, this study provides an effective framework for species-level mapping and phenological monitoring of aquatic vegetation, offering valuable support for the management and conservation of lake ecosystems.
Why it matches plant phenotyping methodsSentinel-2画像と機械学習等を統合した、植物種分布・構成・フェノロジーを抽出する手法を開発し、精度検証と大規模適用を行っているため、植物フェノタイピング手法が中心である。
abstractwe developed an integrated framework combining machine learning and a priori ecological knowledge to quantify the spatiotemporal changes in aquatic plant distribution, species composition and phenological dynamics for eight dominant species in five regulating lakes
Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · checked 5 Sept 2026
Calcium ions (Ca2+) function as ubiquitous second messengers that translate environmental and developmental cues into spatially and temporally defined cellular responses in plants. This review summarizes the cellular architecture and molecular mechanisms that generate, shape, and terminate Ca2+ signals, with emphasis on plasma-membrane channels, intracellular stores, pumps, exchangers, and organelle-associated transport systems. We also examine the development of live Ca2+ indicators, from chemical dyes and aequorin to ratiometric and single-fluorophore genetically encoded calcium indicators, and discuss principles for selecting sensors for different tissues and subcellular compartments. Recent studies have applied these tools to abiotic stress, plant immunity, polar growth, development, symbiosis, and systemic signaling. Accurate quantitative imaging nevertheless requires careful matching of sensor properties to the target cellular environment and rigorous control of motion, spectral interference, and analytical procedures. Combining improved indicators with advanced microscopy, genetic validation, and standardized data analysis should help connect distinct Ca2+ signatures with their molecular origins and physiological roles.
Why it matches plant phenotyping methods植物のCa2+シグナルを定量するライブイメージング指標、顕微鏡、解析手順を中心にレビューしており、生理状態の取得方法が主題である。
abstractWe also examine the development of live Ca2+ indicators, from chemical dyes and aequorin to ratiometric and single-fluorophore genetically encoded calcium indicators, and discuss principles for selecting sensors for different tissues and subcellular compartments.
Efficient facility-scale tomato ripeness monitoring remains difficult in greenhouses where uneven terrain limits conventional wheeled and rail-guided platforms and planar cameras provide restricted coverage. This study developed a wheel-legged quadruped monitoring system integrating LiDAR, a depth camera, and a panoramic camera. An adaptive gait-switching strategy supported navigation across heterogeneous terrain. Panoramic images were projected into six perspective views, and the left and right views were processed using a YOLOv8-based ripeness recognition model. Time-synchronized detections and robot poses were fused to map ripeness observations into three-dimensional greenhouse coordinates. Five field experiments in a commercial tomato facility demonstrated autonomous row traversal, inter-row transition, and avoidance of pedestrians, obstacles, and cultivation boundaries. The recognition pipeline continuously identified multiple ripeness stages under variable illumination, foliage occlusion, and robot motion, while the spatial fusion procedure produced a facility-scale three-dimensional ripeness distribution. The integration of terrain-adaptive quadruped mobility, panoramic perception, and spatial mapping provides a practical framework for continuous ripeness monitoring and can support targeted harvesting, yield forecasting, and crop management.
Why it matches plant phenotyping methodsトマト果実の成熟度を画像認識で取得するロボット型フェノタイピングシステムを開発し、実環境で評価しており、表現型取得法が研究の中心である。
abstractThis study developed a wheel-legged quadruped monitoring system integrating LiDAR, a depth camera, and a panoramic camera.
Abstract Plants employ non-photochemical quenching (NPQ) to protect their photosynthetic apparatus from photodamage. The response latency of NPQ following changes in light intensity is thought to significantly decrease photosynthetic efficiency. The amount of NPQ is commonly quantified from chlorophyll-fluorescence techniques using the Stern–Volmer equation, which requires fully closed reaction centres (RCs) of photosystem II, yielding NPQ in the absence of photochemical quenching ( $${\rm{NPQ}}^{\rm{Closed}}$$ NPQ Closed ). However, in nature, NPQ and photochemical quenching are normally present simultaneously. Therefore, to obtain a full understanding of this process, NPQ should also be explored when the RCs are open. Here we developed two methodologies to obtain NPQ in the presence of photochemistry ( $${\rm{NPQ}}^{\rm{Open}}$$ NPQ Open ) using both fluorescence lifetime and fluorescence yield measurements. A detailed comparison in Arabidopsis thaliana plants reveals that the value of $${\mathrm{NPQ}}^{\mathrm{Open}}$$ NPQ Open is ~35% lower than that of $${\rm{NPQ}}^{\rm{Closed}}$$ NPQ Closed . This difference is consistently observed across all measurements and is seen both upon closing ( $${\rm{NPQ}}^{\rm{Open}}\to {\rm{NPQ}}^{\rm{Closed}}$$ NPQ Open → NPQ Closed ) and upon reopening ( $${\mathrm{NPQ}}^{\mathrm{Closed}}\to {\mathrm{NPQ}}^{\mathrm{Open}}$$ NPQ Closed → NPQ Open ) of the RCs. We show that this difference can be explained by the presence of RC-induced ‘instantaneous’ switching of the NPQ quenching rate. This means that, in plants, NPQ is much more economical than is widely believed, it is large when its presence is needed, and it decreases instantaneously when the need disappears.
Why it matches plant phenotyping methods植物の光合成状態（NPQ）を測定するための蛍光寿命・蛍光収率に基づく2つの方法を開発し、比較検証しているため、方法開発が中心である。
abstractHere we developed two methodologies to obtain NPQ in the presence of photochemistry ( $${\rm{NPQ}}^{\rm{Open}}$$ NPQ Open ) using both fluorescence lifetime and fluorescence yield measurements.
Reproduction assets foundThe paper's custom ultrafast fluorescence analysis code (ICA-based PSII/PSI deconvolution and NPQ calculations) is explicitly deposited by the authors on GitHub, alongside the original data contributions.Code · publicr(s) for their contribution to the peer review of this work. Peer reviewer reports are available.
Funding
This work was supported by ‘Nanoscale regulators of photosynthesis’ NWO research project (project number: OCENW.GROOT.2019.86).
Data availability
The original contributions presented in the study are available via GitHub at https://github.com/L-Ramakers/Heimdall .
Code availability
The custom analysis code used in the study is available via GitHub at https://github.com/L-Ramakers/Heimdall .
Competing interests
The authors declare no competing interests.
Footnotes
Publisher’s note Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional afOpen asset ↗L-Ramakers/Heimdalllines:88-125Plant phenotyping relevance match · UnverifiedCrossref · checked 5 Sept 2026
The uniformity of maize plant spacing serves as a critical indicator for assessing sowing quality, seed vigor, and field seedling emergence stability. However, manual measurement is inefficient, and complex field conditions make automatic seedling detection and plant spacing measurement challenging. Aiming at the challenges of missed detection, insufficient accuracy for small targets, and large errors in plant spacing calculation under complex field conditions, this study constructs a high-quality dataset containing 693 maize seedling images and implements preprocessing enhancement for images degraded by haze or dust. An intelligent maize seedling detection and plant spacing measurement method based on improved YOLOv8 is proposed. The Global Attention Mechanism (GAM) is embedded into the backbone network to strengthen cross-dimension information interaction between channels and spaces, suppress background interference, and reduce the missed detection rate. The Bi-directional Feature Pyramid Network (BiFPN) is adopted to replace the original PAFPN for enhanced multi-scale feature fusion and deep semantic representation. A new 160 × 160 high-resolution small-object detection layer is added to significantly improve the detection performance of weak and small seedlings. Experimental results demonstrate that the improved model achieves a precision, recall, mAP50, and mAP50-95 of 89.4%, 90.3%, 94.4%, and 49.4%, respectively, which are 2.6, 0.5, 1.5, and 2.7 percentage points higher than those of the original YOLOv8 model. These results indicate that the proposed model improved maize seedling detection performance under complex field conditions. Automatic plant spacing calculation is realized based on detection outputs; the average plant spacing of the dataset is 30.42 cm, with a relative error of only 4.93% compared with the preset sowing spacing of 32 cm. The proposed method can efficiently accomplish field seedling identification, plant spacing quantification, and sowing quality evaluation, providing reliable technical support for precision maize sowing, seeder parameter optimization, and intelligent field management, which is of great significance for promoting the intelligent upgrading of grain crop production.
Why it matches plant phenotyping methodsトウモロコシ幼苗の検出画像から株間という植物形態・配置形質を自動抽出するYOLOv8手法を開発し、データセット構築と性能検証まで行っており、フェノタイピング手法が中心である。
abstractAutomatic plant spacing calculation is realized based on detection outputs
BarleySeed / grainPhysiological trait estimationGrowth / development / phenologyWater status / transpiration
Background and aims Laser Biospeckle Activity (LBSA), derived from laser-induced speckle variations in response to dynamic changes in living tissues, is a promising non-invasive technique for evaluating seed germination. Methods Malting barley (Hordeum vulgare subsp. distichum L. cv. Sinfonia) seeds were analysed using five coefficients-Generalised Differences (GD), Fujii, Lasca, Frequent Motion Image (FMI), and Moment of Inertia (MI)-to assess their ability to discriminate between treatments and tissue regions, and to track changes during imbibition. Whole and longitudinally cut seeds from two treatments (control [untreated] and autoclaved [heat-inactivated]) were analysed, focusing on embryo/endosperm activity ratios. LBSA was also evaluated as a function of imbibition time and seed moisture content. Key results Four coefficients (GD, Fujii, FMI, and MI) successfully differentiated control and autoclaved seeds, as well as embryo and endosperm regions in control seeds, revealing distinct activity patterns. In control seeds, LBSA increased with imbibition time and was well described by polynomial models (quadratic for Fujii and MI; cubic for GD and FMI). GD, Fujii, and FMI required a minimum seed moisture content of 25% to detect activity, while MI was responsive only above 31.5%. In contrast, Lasca was exclusively sensitive to hydration level, fitting a relaxation curve independent of treatment. Conclusions LBSA constitutes a robust, non-destructive methodology for monitoring early germination processes. By combining coefficients, it is possible to infer physiological traits such as embryo specificity, hydration thresholds, and dynamic metabolic reactivation. This positions LBSA not only as a diagnostic tool for seed viability but also as a physiologically informative proxy for studying germination and tissue-level dynamics.
Why it matches plant phenotyping methodsレーザーバイオスペックル画像法を用いて種子の生存性、含水率、発芽動態を測定・識別し、複数係数の性能評価とモデル化を行う手法中心の研究である。
abstractLaser Biospeckle Activity (LBSA), derived from laser-induced speckle variations in response to dynamic changes in living tissues, is a promising non-invasive technique for evaluating seed germination.
Abstract The classification of banana leaf disease has a large impact on agricultural output and relies heavily on timely early detection, with reliability as a fundamental component of effective crop management. The framework proposed in this study comprises a Hamiltonian Full Node Coverage Graph Attention Network (HFNC-GAT) and Fuzzy C-Means super pixel graph learning to explain the classification of banana leaf diseases. The HFNC-GAT allows for the representation of segmented leaf areas as the nodes in a graph. This framework also makes optimal use of an attention learning model to represent the spatial dependence of diseased leaf regions, allowing it to leverage both local and global spatial dependencies. The HFNC-GAT was demonstrated through observed experiments to achieve high performance with 96.11 and 94.19 accuracy, 0.9111 Cohen's Kappa, 0.9111 MCC, 0.9344 F2-score, and 0.9939 ROC-AUC compared to the performance of conventional CNN, GCN, and baseline GAT models.
Why it matches plant phenotyping methodsバナナ葉の病斑領域を画像から抽出・分類するグラフ学習手法が研究の中心であり、植物の病害状態を直接推定するため、植物フェノタイピング手法として適格です。
abstractThe framework proposed in this study comprises a Hamiltonian Full Node Coverage Graph Attention Network (HFNC-GAT) and Fuzzy C-Means super pixel graph learning to explain the classification of banana leaf diseases.
Reproduction assets foundThe paper's Dataset Availability statement explicitly declares two public Kaggle banana leaf image datasets used for the phenotyping/classification experiments: Banana Leaf Disease Dataset V4 and BananaLSD. No author analysis code or trained model is reported as publicly available.Dataset · publicThe Banana Leaf Disease
Dataset V4 is available at https://www.kaggle.com/datasets/rayhanarlistya/banana-leaf-disease-dataset-v4.Open asset ↗Kaggle · banana-leaf-disease-dataset-v4pdf-page:19 lines:1-55Dataset · publicThe Banana Leaf Spot Diseases (BananaLSD) dataset is available at
https://www.kaggle.com/datasets/shifatearman/bananalsdOpen asset ↗Kaggle · bananalsdpdf-page:19 lines:1-55Code / dataset availability confirmedCrossref · checked 11 Sept 2026
Abstract Purpose Long-term monitoring of crop biophysical and biochemical traits remains challenging in high-latitude regions due to short growing seasons, frequent cloud cover, and highly variable weather. In this context, unmanned aerial vehicles (UAVs) offer flexible, high-resolution observations, but their added value relative to low-cost proximal sensors and their effectiveness for radiative transfer model (RTM) inversion across diverse crop canopies remain insufficiently quantified. This study evaluated the potential of a two-band proximal spectral reflectance sensor (SRS) and a five-band multispectral UAV sensor for retrieving leaf area index (LAI), leaf chlorophyll content (LCC), and canopy chlorophyll content (CCC) using PROSAIL inversion across major crops in Northern Europe over two growing seasons (2023–2024). Methods and Results Two inversion approaches – look-up table (LUT) and artificial neural network (ANN) were applied to PROSAIL simulations. UAV–PROSAIL–ANN outperformed LUT-based inversion and SRS observations, achieving the highest accuracy for LAI (R 2 = 0.81–0.95; RMSE = 0.27–0.77 m 2 /m 2 ), followed by CCC (R 2 = 0.58–0.94; RMSE 2 ), while LCC remained less accurately estimated (R 2 = 0.26–0.78; RMSE 2 ). Across sensors and methods, retrieval accuracy decreased in the order of LAI, CCC, and LCC, reflecting the stronger spectral control of canopy structure compared to biochemical traits. Conclusions The UAV–PROSAIL–ANN framework effectively captured spatial and temporal variability in crop traits, producing canopy-scale maps consistent with field observations. These results demonstrate the robustness and scalability of hybrid PROSAIL–ANN inversion for high-latitude crop monitoring, while highlighting current limitations in biochemical trait retrieval using multispectral data.
Why it matches plant phenotyping methodsUAV・近接分光センサーとPROSAIL反転、ANNを用いてLAIや葉・群落クロロフィルを推定し、精度比較と圃場観測との整合性評価を行うことが研究の中心である。
abstractThis study evaluated the potential of a two-band proximal spectral reflectance sensor (SRS) and a five-band multispectral UAV sensor for retrieving leaf area index (LAI), leaf chlorophyll content (LCC), and canopy chlorophyll content (CCC) using PROSAIL inversion across major crops in Northern Europe over two growing seasons (2023–2024).
Reproduction assets foundThe paper's Data availability statement explicitly deposits the authors' UAV image processing code (irradiance normalization, vignetting, exposure compensation, radiometric calibration) in a public GitHub repository under GPL v3.0; other data are available only upon request.Code · publicData availability Code to perform irradiance normalization, vignetting, exposure compensation, and radio-
metric calibration is available at https://github.com/fieldSITES/scripts/tree/main/UAV under GNU General
Public License v3.0. Other data will be made available upon request.Open asset ↗UAVpdf-page:34 lines:1-40Plant phenotyping relevance match · UnverifiedCrossref · checked 11 Sept 2026
Rice leaf diseases significantly affect crop health and yield potential, creating a need for accurate and timely disease diagnosis. Many existing approaches still rely on single-stream feature extraction architectures, which may limit the ability to simultaneously capture global contextual information and fine-grained disease characteristics. Moreover, limited interpretability and decision-support capability hinder their practical deployment in real-world rice farming. To address these limitations, we employed a framework consists of two parallel feature extraction streams designed to capture different characteristics of disease patterns. The first stream uses a Swin Transformer to learn global contextual information and long-range spatial relationships across the leaf image. The second stream employs ConvNeXt to extract local texture features, including lesion details, spots, and color variations. By combining these complementary representations, the proposed framework effectively integrates global semantic information with local disease-specific features for improved classification performance. The extracted features from the two streams are fused through concatenation followed by an attention-based feature refinement module, enabling adaptive weighting of discriminative features. The refined representation is then used by a fully connected classifier for disease prediction. To enhance model interpretability, Grad-CAM visualization is incorporated to highlight disease-relevant regions and provide visual explanations for the model decisions. Furthermore, an LLM-based advisory module is integrated as a post-diagnosis decision-support component to provide contextualized disease management information and suggestions based on the predicted disease category. The generated suggestions are intended to support, rather than replace, expert agronomic recommendations and should be validated by agricultural professionals before practical application. The proposed framework was evaluated on two rice leaf disease datasets, achieving accuracies of 99.55% and 97.06% on Dataset-1 and Dataset-2, respectively, which are higher than those reported in previous studies. Additionally, five-fold cross-validation on Dataset-1 achieved an average accuracy of 98.91% ± 0.47, demonstrating the stability of the proposed approach. Cross-dataset evaluation using nine common disease classes across both datasets achieved 90.80% accuracy, indicating improved generalization across different data distributions. The proposed framework provides an accurate and explainable approach for rice leaf disease diagnosis in smart agriculture applications.
Why it matches plant phenotyping methodsイネ葉画像から病害状態を推定する二流路深層学習手法を開発・評価しており、植物病害表現型の取得・分類が中心である。
titleGlobal-Local Feature-Based Rice Leaf Disease Classification Using Two-Stream Deep Neural Network Feature Fusion
This paper explores how deep learning methods can be used to monitor the health of crops and identify diseases, particularly for the apple crop. As the need for food security and sustainable farming methods increases, there is a strong demand for early detection of crop diseases. We have used a Convolutional Neural Network (CNN), based on the model of VGG16 architecture, since the model is known to be effective in image classification. The dataset contained 7771 training images for to enhance machines deep learning regarding plant diseases. Following that, validation image collection of 1747 images divided into four health conditions of the apple crops. In addition, the model was evaluated using 196 new images as a final test. To enhance the model capacity for recognizing diseases of real leaves rather than just memorize exact training pictures, data augmentation was used with ImageDataGenerator of TensorFlow. This means the training images were zoomed, rotated, and shifted to enable the machine detects more variations. Ten epochs of training were performed to measure the model accuracy. The results indicated that the model obtained significant improvement in training and validation accuracy from 56.43% to 78.12% and 92.94 to 96.93%, respectively. Most impressively, the final test dataset, which contained completely new images, scored an accuracy rate of 98%. The results indicate that in the architecture field the application of deep learning methodologies is effective, suggesting that automated detection of diseases by using sophisticated image analysis manages crop diseases identification efficiently. Combination of these methods successfully creates avenues for novel research to built real-time systems of crop disease monitoring, which help farmers increase their productions and farm their lands sustainably.
Why it matches plant phenotyping methodsリンゴ葉の画像から病害・健全状態をCNNで推定する画像ベース植物フェノタイピング手法であり、学習・検証・未知画像で性能評価を行っているため含める。
abstractWe have used a Convolutional Neural Network (CNN), based on the model of VGG16 architecture, since the model is known to be effective in image classification.
Accurate estimation of aboveground biomass (AGB) in dryland savanna woodlands is constrained by sparse field data, which has motivated widespread fusion of field plots with spaceborne LiDAR reference data from the Global Ecosystem Dynamics Investigation (GEDI). Here, we show that such fusion can substantially inflate apparent model accuracy when the two reference sources sample different spatial domains. Using 44 field plots from the Abu-Gadaf Natural Reserved Forest (AGNRF), Sudan, and 56 GEDI L4A footprints drawn from a 50 km buffer surrounding the reserve, we trained Random Forest (RF), Gradient Boosting (GB) and Classification and Regression Tree (CART) models on Sentinel-1, Sentinel-2, SRTM and Dynamic World predictors and evaluated them under 10-fold, 2 km block spatial cross-validation. The merged dataset yielded apparently moderate performance (RF: RMSE = 9.40 Mg ha−1, R2 = 0.33). However, GEDI-derived AGB was 2.1 times higher than field-measured AGB (18.71 vs. 8.89 Mg ha−1; Kolmogorov–Smirnov D = 0.53, p
Why it matches plant phenotyping methods圃場・GEDI・衛星データを統合して植物群落の地上部バイオマス（AGB）を推定し、空間交差検証でモデル精度と空間ドメイン不一致によるバイアスを評価している。植物形質の推定手法の検証が中心で、単なる生物学的実験の routine measurement ではない。
abstractAccurate estimation of aboveground biomass (AGB) in dryland savanna woodlands is constrained by sparse field data, which has motivated widespread fusion of field plots with spaceborne LiDAR reference data from the Global Ecosystem Dynamics Investigation (GEDI).
The inflorescence is a key yield-determining organ, yet its complex morphology makes manual pixel-level annotation time-consuming, leading to a scarcity of high-quality segmentation datasets. To address this bottleneck, we propose ZCAT (Zero-shot Cross-crop Annotation Transfer), a novel paradigm for zero-annotation cross-crop pseudo-mask screening. ZCAT completely eliminates pixel-level manual annotation of the target crop, requiring only holistic quality assessment of model-generated pseudo-masks (5-10 s per image). Specifically, we train a SegFormer model on public rice panicle datasets (CVRP and RiceSEG) and transfer it across crops to the wheat spike segmentation task. The key innovation is the introduction of a human-defined quality function Q, which circumvents the fundamental challenge in self-learning algorithms: the inability of computers to autonomously distinguish good masks from bad ones. Through iterative human-in-the-loop pseudo-label screening with a curriculum learning strategy, each round adds only a few high-quality pseudo-masks to the training set, continuously improving model performance. After four iterations, ZCAT produces pseudo-masks with an average Spike IoU of 0.7003, evaluated against the GWFSS manual annotations as ground truth. Moreover, the pseudo-mask dataset exhibited higher benchmark performance than the GWFSS manual annotations (Spike IoU 0.7612 vs. 0.7027; mIoU 0.8627 vs. 0.8247), suggesting stronger self-consistency. A generalization test on a strictly held-out set of 100 manually annotated wheat spike images showed that the model trained on ZCAT-generated pseudo-masks achieved marginally better performance than that trained on the GWFSS manual annotations (Spike IoU: 0.5112 vs. 0.4927; mIoU: 0.5627 vs. 0.5247). The time budget of the ZCAT pipeline was substantially lower than that of manual annotation. ZCAT opens a new pathway for rapid annotation of plant reproductive structures or other organs and significantly reduces data preparation costs in plant phenomics. The generated wheat spike pseudo-mask dataset and the mask quality screening tool (Mask Quality Screener) are open-sourced.
Why it matches plant phenotyping methods植物器官セグメンテーションのためのゼロショット転移、擬似マスク品質評価、反復学習パイプラインを開発・検証しており、表現型取得基盤が中心である。
abstractThe key innovation is the introduction of a human-defined quality function Q
Reproduction assets foundThe paper explicitly open-sources two paper-specific assets: the ZCAT-generated wheat spike pseudo-mask dataset and the Mask Quality Screener tool, both with public GitHub URLs in the Data availability statement.Dataset · publicThe wheat spike pseudo-mask dataset and Mask Quality Screener are available at https://github.com/zyxyes1/MaskQualityScreener and https://github.com/zyxyes1/Wheat-Spike-Semantic-Segmentation , respectively.Open asset ↗Wheat-Spike-Semantic-Segmentationlines:415-440Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · checked 5 Sept 2026
High-throughput phenotyping is key in modern breeding for rapidly and cost-effectively evaluating salt-adaptive traits. However, few studies have combined spectral reflectance indices (SRIs) with deep learning to assess field-grown wheat under salt stress. In this study, we developed optimized 2D and 3D SRIs integrated with artificial neural network (ANN) to assess chlorophyll a (Chl a), chlorophyll b (Chl b), total chlorophyll (TChl), and grain yield (GY) in 32 recombinant inbred lines (RILs) and four cultivars under 150 mM NaCl field conditions. ANOVA revealed that genotype contributed the largest proportion of the treatment sum of squares across all traits (60–80%), followed by the genotype × year interaction (8–15%), whereas year contributed the smallest proportion (1–5%). Heatmap clustering of these traits clearly distinguished salt-tolerant from salt-sensitive genotypes. The study findings highlight using four key traits as screening criteria for salt tolerance in wheat. Our optimized 2D/3D spectral indices showed moderate to strong predictive power (R 2 = 0.25–0.75), outperforming earlier indices. Multi-season data improved accuracy by 15–25%, with best predictions for Chl a and TChl (R 2 = 0.34–0.75) versus Chl b and GY (R 2 = 0.25–0.64). Top models included ANN-3D-SRIs-8 for Chl a (R 2 = 0.735/0.644), ANN-3D-SRIs-3 for Chl b (R 2 = 0.611/0.549), ANN-2D-3D-SRIs-3 for TChl (R 2 = 0.713/0.619), and ANN-2D-SRIs-2 for GY (R 2 = 0.648/0.553). This framework combines optimized indices and machine learning for scalable, high-throughput phenotyping to advance precision breeding of salt-tolerant wheat.
Why it matches plant phenotyping methodsスペクトル指数とニューラルネットワークを開発・評価し、コムギのクロロフィルと収量を高スループット推定する方法が研究の中心である。
abstractwe developed optimized 2D and 3D SRIs integrated with artificial neural network (ANN) to assess chlorophyll a (Chl a), chlorophyll b (Chl b), total chlorophyll (TChl), and grain yield (GY)
Nitrogen is an important element present in vital substances such as plant proteins and chlorophyll, the content of which directly reflects the nutrient status of crops, and provides a theoretical basis for crop nutrient diagnosis, growth monitoring and yield potential prediction. Taking the chip-level visible/near-infrared spectral sensor AS7263 as the data acquisition module and the Arduino Uno single-chip microcomputer development board as the control module, a portable crop leaf spectral sensing system was designed in this study. The spectral reflectance and nitrogen content of wheat leaves were obtained through field experiments. Principal Component Analysis (PCA) was used to eliminate abnormal spectral data. Combined with pretreatment algorithms including Multiplicative Scatter Correction (MSC) and Standard Normal Variate (SNV), the prediction models for wheat leaf nitrogen content were established based on Partial Least Squares (PLS), Support Vector Machine (SVR), Random Forest (RF) and a Back Propagation (BP) neural network. The results showed that compared with SNV, the model performance based on the spectral data after MSC pretreatment was better. The test set R 2 values of PLS, SVR, RF and BP models were 0.61, 0.75, 0.83, and 0.89, and the root mean square errors (RMSEs) were 4.62 mg g -1 , 4.38 mg g -1 , 3.39 mg g -1 and 3.27 mg g -1 , respectively. The MSC-BP prediction performance was the best, and the non-destructive and accurate detection of nitrogen in wheat leaves was realized, which verified the feasibility of micro-spectral sensing technology in crop nutrition diagnosis.
Why it matches plant phenotyping methods小型可见/近红外光谱传感系统及预测模型是论文核心，用于无损估计小麦叶片氮含量这一植物生理性状，并报告了模型比较与验证性能。
abstracta portable crop leaf spectral sensing system was designed in this study
This study evaluated the effects of input-channel composition and the incorporation of attention modules on the detection accuracy of visually suspected pine wilt disease (PWD)-affected trees using unmanned aerial vehicle (UAV) RGB orthomosaic imagery and the YOLO26-Large (YOLO26-L) deep learning model.Four datasets were constructed: Dataset A, consisting of three RGB channels; Dataset B, combining RGB with elevation and aspect (5 channels); Dataset C, combining RGB with three graylevel co-occurrence matrix (GLCM) texture features, namely Angular Second Mement (ASM), Entropy, and Homogeneity (6 channels); and Dataset D, combining RGB with the GLCM texture features and topographic information, namely elevation and aspect (8 channels).The Squeeze-and-Excitation (SE) block and Convolutional Block Attention Module (CBAM) were independently integrated into the YOLO26-L baseline model, and the detection performance of the 12 combinations was analyzed.In the accuracy assessment, the YOLO26-L baseline model trained with Dataset B achieved the highest mean Average Precision (mAP)@50 of 0.63 among the 12 combinations.However, the differences among the 12 combinations were marginal and did not indicate the superiority of a specific combination.Dataset C and Dataset D, which incorporated GLCM texture features, achieved accuracy levels similar to those of Dataset A, which used RGB alone, indicating that GLCM texture features did not substantially improve the detection of PWD-affected trees in 5-cm-resolution imagery.The application of attention modules also did not lead to a consistent improvement in accuracy, and the detection rates of all 12 combinations remained around 60% for objects smaller than 25 m².These results suggest that simply adding texture features or attention modules did not reliably improve detection accuracy.This study extends RGB-based UAV detection of PWD-affected trees by progressively integrating elevation, aspect, and GLCM texture features into four datasets and evaluating their interactions with SE and CBAM attention modules across a 12-combination experimental matrix.The results can inform the selection of input channels and model architectures in future forest disease detection studies.
Why it matches plant phenotyping methodsUAV画像と深層学習モデルを用いてマツ材線虫病罹病木の検出精度、入力特徴、注意機構を比較評価しており、植物の病害状態を推定する方法の技術的検証が中心である。
abstractThis study evaluated the effects of input-channel composition and the incorporation of attention modules on the detection accuracy of visually suspected pine wilt disease (PWD)-affected trees using unmanned aerial vehicle (UAV) RGB orthomosaic imagery and the YOLO26-Large (YOLO26-L) deep learning model.
O cultivo de maçãs tem grande importância econômica no setor agropecuário brasileiro, especialmente na região Sul do país. No entanto, a produtividade dos pomares é frequentemente comprometida por doenças foliares que, se não tratadas, podem resultar em perdas substanciais. Nesse contexto, os avanços em técnicas de Aprendizado de Máquina têm possibilitado o desenvolvimento de soluções computacionais que auxiliam no diagnóstico agropecuário com maior precisão e agilidade. Este trabalho propõe uma abordagem baseada em Redes Neurais Convolucionais que utiliza aprendizado por transferência para detectar automaticamente sintomas de doenças em folhas de macieira. A metodologia desenvolvida inclui a segmentação e análise de regiões sintomáticas para reduzir o ruído proveniente de áreas saudáveis e direcionar o aprendizado do modelo para sinais relevantes. Um total de 32.382 manchas de sintomas foram extraídas de 1.995 imagens originais, abrangendo cinco classes de distúrbios foliares: glomerela, sarna, danos por herbicidas, deficiência de magnésio e deficiência de potássio. A rede MobileNetV2, treinada por meio de aprendizado por transferência, alcançou um F1-score de 0,926 e 93,8% de acurácia no conjunto de teste reservado. Os resultados indicam um bom desempenho no contexto avaliado, sugerindo o potencial da abordagem como ferramenta de apoio ao diagnóstico da saúde das plantas e à tomada de decisões em campo. Palavras-chave: aprendizado de máquina; visão computacional; doenças em plantas. Application of convolutional neural networks for disease detection in apple tree leaves ABSTRACT: Apple cultivation holds significant economic importance in the Brazilian agricultural sector, especially in the southern region of the country. However, orchard productivity is often compromised by foliar diseases, which, if left untreated, can lead to substantial losses. In this context, advances in Machine Learning techniques have enabled the development of computational solutions that support agricultural diagnostics with greater accuracy and agility. This work proposes an approach based on Convolutional Neural Networks that uses transfer learning to automatically detect disease symptoms in apple leaves. The developed methodology includes segmentation and analysis of symptomatic regions to reduce noise from healthy areas and focus the model’s learning on relevant signals. A total of 32,382 symptom patches were extracted from 1,995 original images, covering five foliar disorder classes: glomerella, scab, herbicide damage, magnesium deficiency, and potassium deficiency. The MobileNetV2, trained via transfer learning, achieved a F1-score of 0.926 and 93.8% accuracy on the held-out test set. The results indicate good performance in the evaluated setting, suggesting the approach’s potential as a tool to support plant-health diagnosis and field decision-making. Keywords: machine learning; computer vision; plant disease.
Why it matches plant phenotyping methods葉の病徴を画像から自動検出・分類するCNNと、症状領域のセグメンテーションを中心的に開発・評価しており、植物病害状態の画像ベース表現型計測に該当する。
abstractEste trabalho propõe uma abordagem baseada em Redes Neurais Convolucionais que utiliza aprendizado por transferência para detectar automaticamente sintomas de doenças em folhas de macieira.
Sustainable wheat farming is challenging. Real-time information on crop health, disease transmission, and anticipated yields is essential for farmers. However, they frequently use slow, expensive, or non-communicative tools. This project develops a workable solution. There is no need for massive server farms because the entire system operates on a single graphics card. It incorporates images of wheat fields, Indian farming notes, greenhouse records, harvest statistics, and NASA meteorological data. Consider them as various “eyes” for crop photo analysis, and we tried several lightweight computer vision models. ConvNeXt-Tiny was slower but could operate on older equipment with 75% accuracy; EfficientNetB0 recognised wheat heads with 92% accuracy; and AgroMark, a hybrid solution that merged photo analysis with agricultural metadata (soil type, rainfall, increased to 87%, etc. Combining picture analysis with attention mechanisms (CBAM) allowed us to anticipate the amount of wheat that a field will yield based on these photo insights, and the results showed that our predictions were accurate, with an R 2 score of 0.97. Additionally, we developed a versatile detector that simultaneously detects disease, stress, head count, and pests. It is adjusted to deal with training data that is unbalanced (some diseases are common, while others are rare). As we packed everything into a 16-GB graphics card, we spent real time determining which strategies smaller training sets, removing weak features, and adjusting loss functions, work. We encounter real-world obstacles along the road, such as photographs from different locations not always match, mislabeled photographs from different locations not always match, mislabeled diseases, and neglected rare pests. Our step-by-step instructions, charts, and code are available.
Why it matches plant phenotyping methods小麦画像から病害・ストレス・穂数・収量などの植物形質・状態を推定するマルチモーダル手法を開発し、複数モデルの精度比較と実装上の検証を行っており、表現型取得・推定が研究の中心である。
abstractThis project develops a workable solution.
Reproduction assets foundThe paper builds its multimodal wheat phenotyping analysis on several explicitly cited public data assets: the Kaggle Wheat Plant Diseases image dataset (used for disease classification, Tables 2 and 9), the Global Wheat Head Detection dataset (used for head detection, Tables 1 and 6), FAOSTAT and India Open GovernmentDataset · publicAvailable online at: https://www.fao.org/faostat/ . FAOSTAT statistical database.Open asset ↗lines:1110-1162Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Understanding the dynamic regulation of endogenous metabolites in plants under environmental stress is essential for elucidating plant adaptive mechanisms and improving crop resilience. However, conventional analytical methods are typically destructive, time-consuming, and lack the capability for real-time monitoring, thereby limiting the investigation of in-vivo biochemical dynamics in plants. In particular, the in-situ, non-invasive detection of small-molecule regulators such as protocatechuic acid (PCA) remains a significant challenge. Herein, we report a wearable electrochemical sensing platform based on a Cu/ZIF-8-modified flexible printed electrode (FPE) for real-time, in-situ monitoring of PCA in plant leaves. The incorporation of Cu into the ZIF-8 framework enhances the electrical conductivity and electrocatalytic activity of the material while maintaining its porous structure, enabling sensitive detection of PCA. By integrating with reverse iontophoresis (RI), non-invasive extraction and continuous monitoring of PCA from living plant tissues are achieved. The dynamic behavior of PCA in green tea plants under light deprivation and drought stress is systematically investigated. The results reveal distinct stress-dependent response patterns, with PCA levels rapidly decreasing under both dark and drought conditions, highlighting its critical role in stress adaptation and metabolic regulation. This work establishes a versatile strategy for real-time tracking of endogenous plant metabolites and provides new insights into plant physiological responses under environmental stress. The proposed platform holds significant promise for applications in plant science, precision agriculture, and the development of stress-resilient crops.
Why it matches plant phenotyping methods植物葉内代謝物をリアルタイム・非侵襲的に取得するウェアラブル電気化学センサーと抽出・連続モニタリング系の開発が中心であり、植物の生理状態を測定する方法として適格です。
abstractHerein, we report a wearable electrochemical sensing platform based on a Cu/ZIF-8-modified flexible printed electrode (FPE) for real-time, in-situ monitoring of PCA in plant leaves.
Abstract Crop improvement increasingly depends on resolving how plants move through physiological states during stress rather than where they end up, yet the dominant convention still reduces dense, multi-sensor, longitudinal trait data to a single static value before genetic analysis, discarding information about state, transition and uncertainty. This systematic review asked whether a quantum-inspired, state-based representation of dynamic crop phenotypes could be integrated with established genomic tools to improve trait characterisation and gene discovery, and what the literature reports about the components it would require. Reporting followed the PRISMA 2020 statement and the Synthesis Without Meta-analysis (SWiM) guideline. Scopus, Web of Science Core Collection, PubMed and a Google Scholar grey-literature sweep were searched from January 2017, retrieving 2,413 records, after de-duplication 1,777 titles and abstracts were screened, 279 full texts were assessed, and 82 studies met the eligibility criteria and entered a thematic synthesis. Studies were dual-screened, appraised with an adapted Mixed Methods Appraisal Tool, and their comparable within-study outcomes synthesised by vote counting on direction of effect; meta-analysis was inappropriate because outcomes were not commensurable. Every component of the paradigm probabilistic state representation, temporal trait modelling and trajectory-aware genomic prediction was independently validated, but no included study unified them for crop-stress genetics. All comparable comparisons favoured the temporally richer method, an asymmetry indicating probable reporting bias, and certainty was moderate for representation and modelling and low for realised genetic gain. The phenotyping bottleneck has migrated from measurement to representation.
Why it matches plant phenotyping methods作物の動的表現型を状態表現・時間的形質モデル・軌跡対応ゲノム予測で扱う方法論の系統的レビューであり、表現型の表現・解析手法が中心である。
abstractThis systematic review asked whether a quantum-inspired, state-based representation of dynamic crop phenotypes could be integrated with established genomic tools to improve trait characterisation and gene discovery
Abstract China's rice production and environmental sustainability are largely dependent on the cold black soil region in Northeast China, where precise water and nitrogen management is challenged by water scarcity and high carbon emissions. To overcome the limitations of conventional empirical management and improve the accuracy of evapotranspiration (ET) estimation in controlled-irrigation paddy fields, this study proposes a novel framework integrating unmanned aerial vehicle (UAV) multispectral and thermal infrared observations, the FAO-56 dual crop coefficient approach, and the NSGA-II multi-objective optimization model. To parameterize and validate this methodology, field data comprising four lower limit thresholds for controlled irrigation and four nitrogen fertilizer application rates were acquired from the Rice Research Site of Farm 856, Heilongjiang Province, China. This integrated approach was used to systematically evaluate rice growth, water consumption, resource use efficiency, and greenhouse gas emissions under different water-nitrogen treatments. Based on these evaluations, an irrigation optimization scheme was developed using daily crop evapotranspiration (ETc). The results indicated that water, nitrogen, and their interaction significantly affected rice yield, irrigation water use efficiency (IWUE), partial factor productivity of nitrogen (PFPN), and global warming potential (GWP). Treatments W3N2 (80%+155 kg/ha N) and W3N3 (80%+200 kg/ha N) achieved the highest yields, 11,883.51 and 11,436.82 kg/ha, respectively, whereas W2N1 (70%+110 kg/ha N) exhibited the best comprehensive performance, with a TCQ value of 0.65. Among the tested vegetation indices, the normalized difference vegetation index (NDVI) showed the strongest correlation with the basal crop coefficient, with an R²of 0.85. The NDVI -crop water stress index ( CWSI ) coupled model achieved the highest ET c estimation accuracy (R 2 = 0.89, RMSE = 0.39 mm/day), reducing the RMSE by 10.3% compared to the traditional, Multi-objective optimization revealed obvious trade-offs among high yield, water saving, high nitrogen efficiency, and low emissions. Scenario S5 was identified as the optimal solution, with an irrigation amount of 669.94 mm, a nitrogen rate of 117.48 kg/ha, a yield of 11,473.43 kg/ha, and the highest coordination degree of 0.86. These results demonstrate that coupling UAV multispectral and thermal infrared imagery with the FAO-56 model can effectively improve ETc estimation and provide reliable data support for water-nitrogen multi-objective optimization in cold-region rice production.
Why it matches plant phenotyping methodsUAVマルチスペクトル・熱赤外画像とFAO-56を結合し、イネの蒸発散量を推定する手法を開発・検証しており、ETc推定精度も定量評価しているため、単なる灌漑試験ではなく植物状態の計測手法が中心です。
abstractthis study proposes a novel framework integrating unmanned aerial vehicle (UAV) multispectral and thermal infrared observations, the FAO-56 dual crop coefficient approach, and the NSGA-II multi-objective optimization model.
This study presents a multi-scale framework for reconstructing snow avalanche (SA) frequency and assessing vegetation structural responses in data-scarce mountain environments. The approach integrates dendrogeomorphological reconstructions, satellite-based spectral disturbance detection, and UAV-based Structure-from-Motion (SfM) photogrammetry, complemented by field data, and was applied to two avalanche paths in the Piatra Craiului Mountains (Southern Carpathians, Romania). Tree ring analyses allowed reconstruction of spatially explicit minimum avalanche chronologies for the 1980–2025 period. These reconstructions were combined with a DEM-based upslope algorithm to derive spatially variable avalanche return periods, revealing the highest frequencies in release and upper-track sectors and progressively longer return periods toward lower-track zones. Sentinel-2 imagery was used to assess the surface footprint of a reconstructed avalanche event in 2018. Among the tested spectral indices, the Moisture Stress Index (MSI) showed the most spatially coherent response, while the combined MSI-NDMI-NBR approach reduced index-specific noise. UAV-SfM photogrammetry supports high-resolution mapping of vegetation structure and surface states. Vegetation was classified using a machine-learning-based object-oriented approach (Random Forest) integrating spectral, geometric, structural, and textural parameters. The multi-parameter feature set yielded very high classification accuracy (Cohen’s Kappa ≈ 0.95). Across avalanche return-period gradients, both UAV-derived and field-based metrics showed a systematic associations between tree height and avalanche frequency, whereas tree age and stem diameter exhibited more variable, path-dependent responses. The proposed framework provides a transferable basis for linking avalanche disturbance regimes with vegetation structure and surface stability in mountain landscapes lacking long-term observational records.
Why it matches plant phenotyping methodsUAV-SfMと機械学習による植生構造・樹高の高解像度推定が研究枠組みの主要部分であり、分類精度も評価しているため、植物状態の画像ベース表現型計測として含める。
abstractUAV-SfM photogrammetry supports high-resolution mapping of vegetation structure and surface states.
Thermal imaging enables non-invasive assessment of canopy temperature, an essential indicator of plant stress, yet the lack of color cues and strong shadow interference make plant segmentation in thermal images difficult. Recent advances in foundation models have demonstrated improved performance and generalizability across applications, showing promise for domain-specific applications with limited annotated datasets such as plant segmentation in thermal images. This study investigates large multimodal models (LMMs) for thermal image segmentation in plant phenotyping. Building upon the SAM-CLIP framework, we design a unified pipeline spanning zero-shot inference, few-shot and low-shot fine-tuning, and active learning to maximize accuracy with minimal supervision. Evaluations on two thermal datasets, LadyBird Brassica and UGA Brassica, demonstrate robust performance after minimal adaptation across both datasets and superior performance compared with baselines, achieving mIoU D values of 97.54% on the LadyBird dataset and 76.94 % on the UGA dataset. We also release the resulting thermal segmentation annotations to support community benchmarking and reproducible research, highlighting the potential of LMMs to enable scalable, high-quality dataset construction for field phenotyping. The released datasets can be found at: https://cornell.box.com/s/dh69xf84464yrc1vlws92l1tflx7qa89
Why it matches plant phenotyping methods熱画像から植物を分割する手法を開発・評価し、植物フェノタイピング用データセットとアノテーションも公開しているため、フェノタイピング手法が中心的である。
abstractThis study investigates large multimodal models (LMMs) for thermal image segmentation in plant phenotyping.
Reproduction assets foundThe authors publicly released the paper-specific thermal segmentation annotations (20,538 LadyBird masks and 37,790 UGA masks) via a Cornell Box link stated in the abstract, results, and data availability statement. No author analysis code or trained model checkpoints are explicitly released; the mmsegmentation GitHub/Dataset · publicwe generated and publicly released segmentation annotations for the complete LadyBird and UGA thermal image datasets using the best-performing SAM-CLIP model. Specifically, the final model obtained through the multi-round training process was used to generate 20,538 masks for the LadyBird dataset and 37,790 masks for the UGA dataset. Details of the generated annotations are provided in Supplementary Fig. S1 , and both annotated datasets are publicly available at: https://cornell.box.com/s/dh69xf84464yrc1vlws92l1tflx7qa89Open asset ↗lines:220-232Plant phenotyping relevance match · UnverifiedOpenAlex · checked 15 Sept 2026
Accurate estimation of pasture biomass is essential for determining cattle stocking rates and grazing durations. The objective of this study was to comparatively evaluate five sensor-based systems for estimating aboveground Bermudagrass (Cynodon dactylon) biomass and identify the leading sensing approach for continued development and broader validation. The five systems included Structure-from-Motion (SfM), Ultrasound Sensor and Ski (US-Ski), Inertial Measurement Unit and Ski (IMU-Ski), Inertial Measurement Unit and Roller (IMU-Roller), and Depth Camera (DC). These systems were deployed on unmanned aerial and ground vehicles to measure crop height under identical field conditions. Regression models relating measured crop height to wet biomass yield (WBY) were developed as a common calibration framework for statistically comparing sensor performance. These empirical allometric equations were intended to support comparative benchmarking of the sensing systems and were not developed as final operational biomass prediction models for immediate field deployment. The influence of vegetation coverage on yield predictions generated by the crop height-based equations was also examined. The results indicated that the IMU-Ski system demonstrated the strongest overall comparative performance (R2 = 0.97; SeY = 1112 kg-wet/ha), followed by the DC system (R2 = 0.97; SeY = 1132 kg-wet/ha). Based on its overall benchmarking performance, including calibration accuracy, residual error and simplicity, the IMU-Ski system was identified as the leading sensing approach for continued development and broader validation among the five evaluated methods. The results also indicated that addition of vegetation coverage into the crop height-based regression models did not significantly improve prediction accuracy under the experimental conditions evaluated.
Why it matches plant phenotyping methods複数のセンサーシステムによる牧草バイオマス推定を比較・校正・ベンチマークしており、植物形質の取得法と技術性能の評価が研究の中心です。
abstractcomparatively evaluate five sensor-based systems for estimating aboveground Bermudagrass (Cynodon dactylon) biomass
Abstract In peanut ( Arachis hypogaea L.), plant stand establishment, seedling vigor, and canopy growth are key determinants of crop performance; yet traditional ground‐based assessment methods can be destructive, labor‐intensive, and limited in throughput. This study evaluated the potential of vegetation metrics derived from unmanned aerial vehicle (UAV)‐based red‐green‐blue (RGB) and multispectral (MS) imagery for high‐throughput, nondestructive assessment of plant stand establishment, seedling vigor, and light interception in peanut. Six runner‐type peanut cultivars were evaluated in 2024 and seven in 2025, with each cultivar represented by two seed size classes (small and large), to generate variation in these traits. Within‐row vegetation discontinuity‐based plant stand ratings for estimating plant stand count ( R 2 = 0.81–0.90), together with canopy coverage for assessing seedling biomass ( R 2 = 0.77–0.82) and light interception ( R 2 = 0.96–0.98), were the best‐performing vegetation metrics. These vegetation metrics provided similar or greater cultivar separation compared with ground‐based measurements. In contrast, several vegetation indices exhibited strong correlations with ground‐based measurements but provided inconsistent cultivar rankings and statistical groupings. MS imagery outperformed RGB imagery for plant stand and seedling biomass assessment. Overall, these results demonstrate that UAV‐derived canopy metrics provide reliable, high‐throughput tools for early‐ to mid‐season crop assessment and offer scalable alternatives to traditional ground‐based approaches for agronomic, crop physiological, and plant breeding research.
Why it matches plant phenotyping methodsUAV画像から植物体の出芽・苗勢・バイオマス・光 interception を推定する植 phenotyping 手法を開発・評価しており、取得指標の性能検証が研究の中心です。
abstractThis study evaluated the potential of vegetation metrics derived from unmanned aerial vehicle (UAV)‐based red‐green‐blue (RGB) and multispectral (MS) imagery for high‐throughput, nondestructive assessment of plant stand establishment, seedling vigor, and light interception in peanut.
Accurate tree volume estimation is central to forest management and carbon accounting. Allometric equations are widely used but limited in transferability across species, regions, and environmental conditions. Mobile Laser Scanning (MLS) offers a promising alternative through direct measurement of tree geometry; however, the influence of tree shape on MLS accuracy remains poorly understood. This study evaluated MLS-derived estimates of stem diameters, total tree height, and merchantable stem volume against destructive reference measurements from 176 trees spanning eight species (four hardwood, four softwood) in Wallonia, Belgium. A Zeb Horizon RT scanner was used; tree architectural descriptors extracted from the point cloud were tested for associations with measurement error. Across 7,824 stem diameter measurements, MLS achieved a mean error of 0.46 cm, with precision declining above 15 m. MLS-derived height outperformed Vertex IV clinometer measurements for hardwood species (RMSE% = 6.88 vs. 8.78) but performed slightly less well for softwoods (RMSE% = 7.36 vs. 6.14). QSM-based volume estimates systematically underestimated reference values, while taper-based reconstruction produced nearly unbiased estimates with an RMSE of 15.72%. Correlation analyses and PCA showed that tree architectural variables explained only a small fraction of MLS error variability. Diameter and height errors were largely independent of structural attributes, while volume errors showed moderate associations with tree size and crown density. These findings indicate that tree architecture is not a primary source of MLS measurement uncertainty. Future MLS-based forest inventory efforts should prioritize acquisition and processing optimization, as scanning conditions and forest structure appear more influential than tree shape.
Why it matches plant phenotyping methodsMLSによる樹木形状・直径・樹高・幹材積の非破壊推定を、破壊測定と比較検証し、測定誤差の要因を評価した方法検証研究である。
titleNon-destructive tree volume estimation using mobile laser scanning: Impact of the tree shape on measurement error.
Automated plant identification based on leaf morphology has gained significant attention in recent years due to its wide range of applications in precision agriculture, biodiversity conservation, environmental monitoring, and botanical informatics. Advances in digital image processing and machine learning have enabled the development of intelligent systems capable of identifying plant species from leaf characteristics with minimal human intervention. Despite these advancements, achieving reliable and accurate classification remains challenging because leaf images are often affected by variations in illumination, complex backgrounds, image noise, differences in orientation and scale, as well as natural leaf deformation. These factors can obscure important morphological features, reduce the effectiveness of feature extraction, and ultimately decrease the accuracy and robustness of automated plant classification systems. Consequently, there is a growing need for intelligent frameworks that can effectively handle these challenges while preserving critical leaf morphology and venation information for reliable plant identification. This study proposes an Intelligent Morphology-Driven Framework that integrates advanced digital image processing and machine learning for robust leaf venation analysis and plant classification. The proposed framework integrates multiple digital image processing and machine learning techniques to enable accurate and automated leaf venation analysis and plant classification. Initially, leaf images undergo preprocessing using grayscale conversion, histogram equalization, Contrast Limited Adaptive Histogram Equalization (CLAHE), Gaussian filtering, Laplacian sharpening, Gabor filtering, and homomorphic filtering to improve image quality and enhance venation and structural details. The enhanced images are then processed through threshold-based segmentation followed by morphological operations, including erosion, dilation, opening, closing, convex hull generation, and skeletonization, to accurately isolate leaf regions while preserving their geometric structure.To characterize leaf morphology, the framework extracts a comprehensive set of features, including geometric descriptors such as area, perimeter, circularity, aspect ratio, solidity, eccentricity, and vein density, together with Hu invariant moments that provide rotation-, translation-, and scale-invariant shape representation. In addition, the framework investigates the influence of image compression by comparing lossless PNG and lossy JPEG formats to evaluate their impact on preserving morphological features and venation details. The extracted feature vectors are subsequently classified using a Random Forest classifier to categorize leaf venation patterns into parallel, reticulate-pinnate, and reticulate-palmate classes.Experimental evaluation demonstrates that the proposed framework achieves an overall classification accuracy of 93.2%, while effectively preserving important morphological characteristics and maintaining computational efficiency. The combination of adaptive image enhancement, morphology-preserving segmentation, comprehensive feature extraction, and robust machine learning classification makes the proposed approach reliable, interpretable, and scalable. Consequently, the framework has significant potential for applications in digital herbarium systems, automated plant identification, biodiversity monitoring, botanical informatics, and precision agriculture.
Why it matches plant phenotyping methods葉画像から形態・葉脈形質を抽出し分類する画像処理・機械学習フレームワーク自体が研究の中心であり、植物表現型の取得・解析手法として適格。
abstractThis study proposes an Intelligent Morphology-Driven Framework that integrates advanced digital image processing and machine learning for robust leaf venation analysis and plant classification.
Abstract Sustainable agriculture has substantial share on improvement of food security and optimization of resources utilization particularly for high value crops like rice leaf. Rice varieties should be properly classified in order to benefit the harvest management, reduced loss after harvest and improved agriculture methods. The traditional classification method usually brings the low precision and the traditional classification method is also subjected to human error, which is difficult to bring about reliable output. This study introduces an optimized multi-class rice leaf disease classification system utilizing “Rice Feature Selection” (RiceFS) and ensemble machine learning approaches. RiceFS is realized based on a feature selection mechanism based on Recursive Feature Elimination. Selected classifiers such as KNN, Random Forest, Gradient Boosting, Ensemble Learning and Optimized SVM are analyzed based on the extracted subset of features and the proposed system is used to classify the seven classes of rice leaf disease. The experimental results show that the Optimized SVM has the best classification results among the different classifiers with accuracy of 92.10%, Precision of 92.20%, balanced Recall and F1 Score, which shows that Optimized SVM is very effective in multi-class rice leaf disease classification. The performance can be improved by feature reduction, generalization capability and computational complexity reduction, which are realized with the help of RiceFS. The proposed framework is designed to provide an intelligent decision support system for timely intervention, loss minimization and sustainable agriculture. Results indicate that these algorithms are applicable for rice leaf disease classification since they are accurate, reliable and scalable.
Why it matches plant phenotyping methodsイネ葉の病害状態を観察データから分類する計算手法が研究の中心であり、RiceFSと複数の機械学習器を用いた分類フレームワークを開発・評価しているため。
abstractThis study introduces an optimized multi-class rice leaf disease classification system utilizing “Rice Feature Selection” (RiceFS) and ensemble machine learning approaches.
Reproduction assets foundThe paper's RiceFS phenotyping/classification experiments are built on two public Kaggle rice leaf disease image datasets, explicitly cited with URLs and a data availability statement. No author code or models are deposited.Dataset · publicThe RiceFS framework proposed initially
performs a feature selection, followed by training
several classifiers: K-Nearest Neighbors (KNN),
Random Forest (RF), Gradient Boosting (GB),
Ensemble Learning, and Optimized Support
Vector Machine (Optimized SVM). The data is
published on the Kaggle website. The data is
open-source at:
https://www.kaggle.com/datasets/vbookshelf/rice-leaf-diseases [44].
This data consists of 120 jpgs of disease infected
rice leaves. The photos are divided into 3
categories according to the kind of disease. There
are 40 images in each class.
Classes
• Leaf smut
• Brown spot
• Bacterial leaf blight
The datasets are preprocessed by eliminating
redundant information, normOpen asset ↗Kaggle · vbookshelf/rice-leaf-diseasespdf-raw-page:11 lines:1-103Plant phenotyping relevance match · UnverifiedCrossref · checked 15 Sept 2026
India’s economy is heavily reliant on agriculture, with a diverse array of crops grown on vast tracts of land. Fruit cultivation, especially papaya, has become more popular in recent years because of its high nutritional and financial value. To increase yield, maximize resource use and lessen reliance on chemical pesticides, modern techniques like protected cultivation and hydroponics are being used more and more. Fruit crops grown in controlled or semi-controlled environments are still susceptible to nutrient imbalances despite these developments, which can have a substantial impact on plant health, fruit quality and overall productivity. Papaya leaf nutrient deficiencies frequently show up in the early stages of growth and can result in poor fruit development and decreased yield if they are not detected in time. To support early diagnosis and better crop management, the current study focuses on creating an effective method for identifying nutrient deficiencies in papaya leaves using a deep learning (DL) framework based on transfer learning (TL). In this nutrient and micronutrient deficiency study and field work observation during year 2024 to 2026 with different climate and weather conditions done in order to tackle a new but related classification task, in the context of plant health assessment, several well-established architectures including InceptionV3, VGG19, DenseNet and Xception have been widely explored for leaf image analysis. Studies commonly utilize publicly available datasets, such as papaya leaf image repositories hosted on platforms like IEEE DataPort, to fine-tune these models for efficient feature extraction and accurate identification of nutrient and micronutrient deficiency patterns. This body of work demonstrates the growing role of transferring convolutional neural network (CNN) models in advancing automated crop monitoring and decision support systems.
Why it matches plant phenotyping methodsパパイヤ葉画像から栄養・微量栄養素欠乏という植物状態を深層学習で識別する手法の開発が研究の中心であり、植物フェノタイピングに該当する。
abstractthe current study focuses on creating an effective method for identifying nutrient deficiencies in papaya leaves using a deep learning (DL) framework based on transfer learning (TL).
Accurate estimation of the photorespiratory CO 2 compensation point (Γ*) is essential for describing the balance between Rubisco carboxylation and oxygenation and for parameterising biochemical models of photosynthesis. Γ* and the rate of CO 2 release in the light (D L ) are commonly estimated using the Laisk method, based on measurements of net CO 2 assimilation rate (A net ) at low chloroplastic CO 2 concentrations (c c ), under several sub-saturating irradiance levels. However, many widely used temperature dependence relationships for Γ* (Γ*(T)) were derived using conventional linear implementations of the Laisk method, despite the intrinsically nonlinear behaviour of the A net -c c response predicted by the photosynthetic theory. Here, we revisited the temperature dependence of Γ* and D L using the improved Laisk-FvCB framework that simultaneously constrains the nonlinear A net -c c response across multiple irradiance levels. Gas exchange of sunflower leaves was measured across a wide temperature range from 3.9°C to 42.0°C. The conventional linear implementation generated highly dispersed pairwise intersections and unstable estimates of both Γ* and D L , including some physiologically unrealistic negative D L values at low temperatures. In contrast, the mechanistically constrained Laisk-FvCB framework produced physiologically meaningful temperature responses and substantially reduced methodological artefacts associated with linear extrapolation. Using this framework, we derived a revised in vivo Γ*(T) relationship described by an Arrhenius-type function with Γ*(25) = 43.4 μmol mol -1 and an apparent activation energy of 27.7 kJ mol -1 , such that Γ*(T) = 43.4 exp[11.176 ((T - 25)/(T + 273.15))], where T is leaf temperature in °C. Comparison with other widely used Γ*(T) formulations showed substantial divergence at temperature extremes, often exceeding the variability expected from realistic interspecific differences in Rubisco specificity among C 3 species.
Why it matches plant phenotyping methods植物葉のガス交換からΓ*と光呼吸CO₂放出速度を推定する改良Laisk-FvCB手法を提示し、従来法との比較で推定の安定性と方法論的アーティファクトを検証しているため、植物表現型測定法が中心である。
abstractHere, we revisited the temperature dependence of Γ* and D L using the improved Laisk-FvCB framework that simultaneously constrains the nonlinear A net -c c response across multiple irradiance levels.
Improving nitrogen use efficiency (NUE) is essential for sustainable agriculture, yet conventionally measured plant characteristics have limited value as NUE proxies. Here we show that artificial intelligence (AI) can uncover previously unrecognized phenotypic variation associated with NUE, revealing genetic variation that is largely missed by conventional phenotypes. We trained a convolutional neural network (CNN) on 25,080 maize images to learn features that distinguish how plants respond to low- and high-N conditions, achieving 96.7% accuracy. The learned features were defined as deep phenotypes. Compared with conventional phenotypes, deep phenotypes showed greater phenotypic variation and higher heritability, enabling the identification of 523 significant loci compared with 21 for conventional phenotypes. We next investigated candidate genes underlying these loci and used these findings to interpret the learned features. Lower CNN layers primarily reflected visual patterns overlapping with conventional phenotypes, whereas deeper layers encoded additional features associated with N-responsive genetic variation. To validate candidate genes identified by the AI framework, we functionally characterized Liguleless2 (LG2), a basic-leucine zipper (bZIP) transcription factor, and demonstrated that lg2 mutants exhibit enhanced root architecture and increased N uptake efficiency. Field trials of 200 hybrids across diverse N environments further supported the AI findings, with each beneficial allele increasing ear weight by an average of 18 g per plot under low-N conditions. These results show how integrating AI and biology can uncover biologically relevant variation underlying complex traits such as NUE and enhance the interpretability of AI models.
Why it matches plant phenotyping methodsCNNで植物画像からN応答に関連する「deep phenotypes」を抽出する手法が研究の中心であり、従来形質との比較や遺伝的妥当性検証も行っている。
abstractWe trained a convolutional neural network (CNN) on 25,080 maize images to learn features that distinguish how plants respond to low- and high-N conditions, achieving 96.7% accuracy.
Conventional methods of plant distance and volume measurements are limited by low efficiency, limited spatial coverage, and high measurement error. LiDAR and RGB-D imaging offer cost-effective, precise, and non-destructive techniques for plant distance and volume measurements. This study aimed to measure cabbage height, volume, and distance using LiDAR and RGB-D imaging. The sensors were mounted on a 1.6 kW electric field scouting platform (EFSP) for data collection. Point cloud (PCD) data were collected using LiDAR, whereas data processing, visualization, and measurements were done using commercial software and open-source programming scripts. A total of 20 cabbage plants were analyzed. LiDAR data processing included data frame screening, outlier removal, denoising, voxelization, and generation of 3D PCD density maps. Depth image processing included importing raw data and metadata shaping using intrinsic camera parameters, visualization, extraction of depth points, and pixel-level measurements of distances and volume. RGB image processing involved image conversion, segmentation, normalization, binary masking, mask cleaning, region extraction of cabbages, separation of ROI and preparation of contours, Delaunay triangulation and convex hull preparation, ROI overlay, bounding box preparation, sharing boundary between two boxes, conversion to pixel distances, and for visualization, plant height, volume measurements, and center to center distance measurement for measuring the plant distance. LiDAR demonstrated higher measurement accuracy for cabbage plant height, circumferential volume (geometric canopy volume), and plant distance, followed by RGB-D imaging, while RGB imagery showed comparatively lower performance under the study field conditions. Overall, LiDAR and RGB-D imaging provided reliable and non-destructive approaches for cabbage geometric characterization under field conditions, although accurately capturing complex plant geometry remains challenging. Positive and negative values of bias represent the over- and under-estimated results, respectively. Future studies should include larger and more diverse plant datasets exhibiting diversified size, shape, and geometric structure to further improve the robustness and general applicability of the proposed sensing approaches.
Why it matches plant phenotyping methodsLiDAR、RGB、RGB-Dを用いてキャベツの高さ・体積・株間距離を取得し、処理手順と測定精度を比較評価する手法研究であり、植物表現型取得が中心である。
abstractThis study aimed to measure cabbage height, volume, and distance using LiDAR and RGB-D imaging.
White lupin ( Lupinus albus L.) is a cool-season grain legume with seed crude protein of 33-47%, competitive with soybean ( Glycine max L.) meal. It also fixes nitrogen and mobilizes soil phosphorus. Because soybean is a summer crop, white lupin can occupy Southeastern winter fields as a complementary protein source. Breeding for seed protein is limited by the cost and throughput of reference phenotyping. To determine how each is best deployed, we compared the utility of near-infrared spectroscopy (NIRS)-based phenomic selection with genomic selection based on 246,847 SNPs from low-pass, whole genome sequencing in a panel of Auburn University breeding lines and USDA National Plant Germplasm System germplasm. A handheld NIR calibration against Dumas reference protein reached screening-grade accuracy (R 2 = 0.81). Under common cross-validation, phenomic predictive ability was 0.93 and genomic was 0.12. The low genomic value was consistent with moderate heritability (H 2 = 0.33) and strong genotype-by-year interaction. Beyond predictive ability, NIRS recovered superior accessions the strictest selection intensity, and 40 to 60 reference assays sufficed to calibrate the model. Handheld NIRS is a low-cost tool for protein calibration and early-generation screening, while genomic prediction remains suited to parental selection, together supporting a complementary strategy for legume breeding Plain Language Summary Soybean meal is the main protein source for livestock and fish farms in the United States. Because soybean is a summer crop, many Southeastern fields sit idle or grow low-value cover crops in winter. White lupin, a cool-season legume whose seeds are as protein-rich as soybean meal, makes a good complementary winter crop: it yields high-protein grain while serving as a cover crop that fixes nitrogen and frees up soil phosphorus for later crops. In our early-stage lupin breeding program, measuring seed protein by standard lab methods is slow and costly. We built a calibration that lets a handheld scanner estimate protein from light, and compared it with predicting protein from the plant’s DNA. The scanner gave accurate, low-cost protein screening from only about 40-60 lab tests, while DNA-based prediction remains suited to guiding parent selection. Used together, these tools offer breeders a practical path to develop high-protein white lupin. Core ideas Handheld NIRS provides screening-grade prediction of white lupin seed crude protein. Spectra carried more usable protein signal than markers by measuring seed chemistry directly. NIRS and genomic prediction serve different stages of a white lupin breeding program. About 40 to 60 reference assays sufficed to calibrate NIRS to near-full accuracy.
Why it matches plant phenotyping methods携帯型NIRSによる種子タンパク質形質の推定・校正・精度検証が研究の中心であり、育種スクリーニングへの実質的応用も評価している。
abstractA handheld NIR calibration against Dumas reference protein reached screening-grade accuracy (R 2 = 0.81).
Accurate detection of blooming roses and flower buds is essential for greenhouse phenotyping, cultivation scheduling, harvest planning, and yield management. However, UAV-derived greenhouse imagery presents major challenges because rose targets are often small, densely distributed, partially occluded, and visually similar to complex backgrounds. This study proposes a lightweight rose detection framework that combines multi-source dataset construction with an improved YOLOv12n-based detector, termed BloomRoseNet. A GreenHouse Rose dataset was constructed by integrating self-collected UAV overhead images, screened RoseTracker images, and supplementary multi-view rose images to increase diversity in scale, growth stage, viewpoint, and background complexity. BloomRoseNet introduces task-oriented improvements for fine-grained feature extraction, adaptive feature fusion, and attention-enhanced detection. The supplementary multi-view data improved precision, recall, and mAP@50 from 85.2%, 82.8%, and 89.2% to 86.1%, 85.3%, and 90.5%, respectively. Compared with the baseline YOLOv12n, BloomRoseNet increased precision, recall, mAP@50, and mAP@50:95 by 3.2, 3.3, 3.6, and 1.6 percentage points, respectively, while reducing parameters from 2.55 M to 2.08 M and model size from 5.5 MB to 4.5 MB. The model also maintained real-time inference capability and stronger robustness under blur, occlusion, and illumination disturbances. The proposed framework provides an effective and practical solution for UAV-based greenhouse rose monitoring and supports precision cultivation management.
Why it matches plant phenotyping methodsバラの開花・蕾を対象としたUAV画像フェノタイピング手法を開発し、データセット構築、検出モデル改良、性能評価を中心に扱っているため。
abstractThis study proposes a lightweight rose detection framework that combines multi-source dataset construction with an improved YOLOv12n-based detector, termed BloomRoseNet.
Corn is a staple crop of global significance; however, foliar diseases may lead to 30–60% yield loss if not detected at an early stage. Conventional visual inspection is time-consuming, subjective, and difficult to scale for smallholder farmers worldwide. To overcome these issues, we present Corn Transfer Learning Network (CTL-Net), an end-to-end hybrid deep learning model for corn leaf disease identification. CTL-Net, which combines Inception-ResNet-v2 as the backbone and MobileNetV3 as a feature extractor in parallel convolutional streams, simultaneously learns diverse scales of texture information from low-level textures, mid-level structural patterns, and high-level disease semantics of RGB leaf images. Adaptive feature fusion is formulated through learnable weighting coefficients and bi-directional spatial–channel attention mechanisms, which further enhance feature discriminability and robustness. The proposed approach is tested on an extensive dataset of 12,456 images from 10 corn diseases, including Northern Leaf Blight, Common Rust, Gray Leaf Spot, and Cercospora Leaf Spot, acquired under controlled and real-field conditions. CTL-Net attains the highest classification accuracy of 99.42%, outperforming DenseNet121 (97.92%), EfficientNetB3 (97.35%), and general stacking models (97.89%). Robustness experiments demonstrate the effectiveness of the proposed method against illumination variations, additive noise, and partial occlusions. CTL-Net enables real-time inference with a latency of 42 ms on an NVIDIA RTX 3090 GPU. Gradient-weighted Class Activation Mapping++ (Grad-CAM++)-based interpretability analysis results in a mean Intersection over Union (IoU) of 87.6% with expert-annotated disease regions. Five-fold cross-validation, ablation studies, and statistical significance testing (p
Why it matches plant phenotyping methodsトウモロコシ葉画像から病徴・病害状態を推定する深層学習手法を開発し、複数モデルとの比較、頑健性評価、交差検証、アブレーションを行っており、植物フェノタイピング手法が中心である。
abstractwe present Corn Transfer Learning Network (CTL-Net), an end-to-end hybrid deep learning model for corn leaf disease identification.
Reproduction assets foundThe paper states its final curated corn leaf disease dataset (12,456 images, 10 classes) is publicly available via the authors' GitHub repository vishruthkp/maizedataset (reference [30] and Data Availability statement). The Kaggle PlantVillage and Corn or Maize Leaf Disease datasets are cited source inputs, not paper-Dataset · public"Prediction of Crop Yield using Machine Learning," International Available: https://github.com/vishruthkp/maizedataset.Open asset ↗vishruthkp/maizedatasetpdf-page:7 lines:1-53Code / dataset availability confirmedEurope PMC · checked 5 Sept 2026
Field / plotLeafClassificationStress / disease detectionDisease symptoms / severity
Automated plant disease recognition from field photographs remains challenging: models trained on laboratory datasets collapse on in-the-wild images, and the current state of the art on PlantWild-the largest open in-the-wild benchmark (18,542 images, 89 classes)-relies on text prototypes derived from a language model to reach 76.18% top 1 accuracy. We ask whether text supervision is truly necessary or whether the bottleneck is the diversity of the visual representation. Our central methodological finding is that backbone selection and fusion matter far more than classifier-head engineering : across 118 experiments, a simple fixed-weight linear-prototype combination on top of three complementary frozen backbones yields larger and more reproducible gains than any head-level adaptive routing mechanism we test. Specifically, through a systematic study of six frozen vision backbones (three CLIP, two DINOv3, and one DINOv2), three classifier heads, and four fusion configurations, completed in a single day on one consumer GPU, we establish three findings. (i) A single self-supervised backbone (DINOv2 ViT-L/14) already surpasses text-augmented MVPDR (77.56% vs. 76.18%). (ii) Concatenating three complementary backbones (DINOv2 + DINOv3 + CLIP) reaches 80.23% ± 0.41% (five seeds), exceeding the published MVPDR accuracy by +4.05 points and our own reproduction of MVPDR under an identical evaluation protocol by +7.96 points, without any language supervision. (The difference between the two deltas reflects evaluation-protocol differences-our split, model-selection criterion, and training schedule-rather than any discrepancy in the reported numbers; see Section 4.6.6 for a full reconciliation.) (iii) Every form of learned routing we test-per-class gating, backbone gating, sample-wise gating-is inessential; the gain is entirely attributable to backbone diversity and a simple linear-prototype scoring combination. On the smaller PlantDoc benchmark, the same principle transfers but with substantially higher seed variance: the best configuration reaches 80.09% at a favourable seed but 76.97% ± 1.48% over five seeds-a suggestive rather than robust gain. Beyond the accuracy headline, we provide a pathology-aware per-class analysis showing that DINOv2/v3 dominate on fine-texture lesion classes (rusts, mildews, and leaf spots) whilst CLIP's narrow advantage concentrates on organ/species-level identification (rice leaf and potato late blight). All primary claims are validated over five seeds, and all code, feature caches, and result files are released for full reproducibility.
Why it matches plant phenotyping methods植物病害の画像認識を対象に、複数の視覚基盤モデル融合と分類器を体系比較・検証しており、病害状態の推定手法が研究の中心である。
abstractOur central methodological finding is that backbone selection and fusion matter far more than classifier-head engineering
Reproduction assets foundThe paper states that its code, cached features, and result files will be released, but no authors' public URL or repository is provided in the supplied blocks (future-tense availability language only). The DINOv3 GitHub link and OpenReview link are third-party backbone resources, not paper-specific assets.Code · publicAll primary claims are validated over five seeds, and all code, feature caches, and result files are released for full reproducibility.Open asset ↗lines:332-335Code / dataset availability confirmedCrossref · checked 14 Sept 2026
Published11 Aug 2026Engineering, Technology & Applied Science ResearchCited by 0 · OpenAlex ↗
In recent years, areca nut plants have been vulnerable to different diseases that appear as distinct colors on leaves, caused by bacteria or fungi. These symptoms disrupt photosynthesis and reduce yield, affecting productivity and crop health. Therefore, accurate plant disease classification is essential for detecting distinct disease shapes and sizes. Existing Deep Learning (DL) models have several limitations that prevent them from distinguishing between various plant diseases due to similar characteristics. To overcome this limitation, a Dynamic elastic boundary strategy Sailfish Optimization Algorithm and Convolution Neural Network (DSFO-CNN) method is proposed to identify and accurately classify arecanut plant diseases. The Visual Geometry Graph-19 (VGG-19) model extracts features that have significant information about disease in arecanut plants. The proposed arecanut plant disease classification model employed feature selection and drop cyclic learning rate, which adjusts the CNN learning rate to efficiently learn the subtle information about various leaf and nut diseases to enhance classification. The experimental results of the DSFO-CNN demonstrate superior performance compared to existing approaches.
Why it matches plant phenotyping methodsアレカヤシの葉・果実に現れる病徴を画像から分類するCNNベース手法を提案・評価しており、植物病害状態の取得・推定が中心的な方法論的貢献である。
abstractTherefore, accurate plant disease classification is essential for detecting distinct disease shapes and sizes.
Reproduction assets foundThe paper's phenotyping inputs are two public image datasets: the collected Arecanut dataset (Kaggle) and the PlantVillage dataset (Kaggle), both explicitly cited and declared openly available. No author analysis code or trained model is released.Dataset · publicDATA AVAILABILITY
The data used in this study are openly available at [19] and
[20].Open asset ↗pdf-page:7 lines:1-63Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · checked 15 Sept 2026
Accurate crop disease diagnosis is critical for agricultural productivity and food security, yet existing deep learning systems often struggle to generalize across visually similar diseases and varying environmental conditions. Recent Vision-Language Models (VLMs) have demonstrated promising zero-shot reasoning capabilities; however, most agricultural diagnostic systems still rely on isolated single-model predictions without collaborative reasoning or consensus mechanisms. In this work, we propose VIDA+PANDA, a multi-agent Vision-Language framework for zero-shot crop disease diagnosis. The framework consists of two stages: VIDA, where multiple VLM agents independently analyze crop leaf images to establish baseline performance, and the Peer-Anchored Named Deliberation Architecture (PANDA), which introduces a structured multi-round debate among a selected group of high-performing and architecturally diverse agents. During deliberation, agents exchange reasoning, critique peer predictions, and revise decisions through evidence-grounded discussion, while an anti-sycophancy mechanism discourages unsupported consensus shifts. Final predictions are generated through performance-weighted consensus voting. Experiments are conducted on the CDDM benchmark using seven heterogeneous VLMs from four independent providers, including two open-source models, under a fully zero-shot setting. A non-participant GPT-5 model serves as an independent judge to assess the final diagnostic predictions. Beyond conventional accuracy, the framework introduces three semantic measures: Semantic Label Similarity (SLS), which measures how semantically close a predicted crop-disease pair is to the ground truth and captures partial correctness overlooked by exact-match evaluation; Reasoning Specificity (RS), which measures how concretely an agent’s explanation references visual evidence such as lesion color, shape, texture, or margins; and Inter-Agent Reasoning Convergence (IRC), which measures the extent to which agents rely on similar visual evidence, capturing epistemic alignment independently of label correctness. Experimental results show that collaborative multiagent deliberation improves individual diagnostic performance and semantic alignment, with the largest gains observed among weaker participating agents. The findings also reveal important relationships between predictive accuracy, persuasive influence, and consensus formation in VLM-based agricultural diagnosis.
Why it matches plant phenotyping methods葉画像から植物病害状態を推定するマルチエージェント画像・言語フレームワークを開発し、ベンチマークで性能評価しており、病害表現型の取得・推定手法が中心である。
abstractwe propose VIDA+PANDA, a multi-agent Vision-Language framework for zero-shot crop disease diagnosis.
Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · Europe PMC · checked 5 Sept 2026
Within the context of climate change, quinoa ( Chenopodium quinoa Willd.) is a climate-resilient crop with high nutritional value. The effects of deficit irrigation on quinoa growth and physiological performance under arid conditions remain insufficiently understood. This study evaluated ten quinoa genotypes (two commercial varieties and eight accessions) under two irrigation regimes to identify traits and spectral indices associated with water-stress tolerance. We combined manual phenotyping of agromorphological and physiological traits with multispectral and spectroradiometer measurements to calculate 35 vegetation indices across 13 and 5 dates, respectively. Deficit irrigation reduced plant height (18%), specific leaf area (8%), yield (43%), harvest index (26%), relative water content (7%), and dry matter accumulation (36%), while relative chlorophyll content (SPAD, Soil Plant Analysis Development) and stomatal density increased by 16% and 13%, respectively; accession ACC_23 exhibited the highest water-use efficiency (5.9 g kg -1 ). A univariate analysis of 35 vegetation indices across 13 dates showed that: Health Index(HIV), Normalized Green-Red Difference Index (NGRD), Red-Green Ratio (RG) and Plant Senescence Reflectance Index (PSRI), were the most sensitive, detecting significant differences between irrigation treatments in up to 32 of the 130 possible genotype-by-date comparisons. Integrating remote sensing into crop phenotyping represented a significant methodological improvement by enhancing phenotyping efficiency, improving detection of deficit irrigation effects, and facilitating identification of tolerant quinoa genotypes for arid production systems.
Why it matches plant phenotyping methodsリモートセンシングと多時点の植 phenotyping を統合し、35の植生指数の感度比較によって水ストレス関連形質を抽出する方法適用が、研究の主要な技術的要素として明示されています。
abstractWe combined manual phenotyping of agromorphological and physiological traits with multispectral and spectroradiometer measurements to calculate 35 vegetation indices across 13 and 5 dates, respectively.
Root anatomical barriers, including the suberized and lignified walls of the endodermis and exodermis, and cortical aerenchyma, regulate water and nutrient transport, gas exchange, and rhizosphere interaction. Their adaptive function places them as an important target for breeding environmentally resilient plant species. Quantifying these structures at high resolution is a manual bottleneck that limits experimental scale. We present RADIX (Root Anatomy Deep- learning Image segmentation across species and platforms), a framework that adapts a large self-supervised vision-transformer foundation encoder (DINOv3), pre-trained on billions of natural images, to root anatomy by fine-tuning its encoder with a dense-prediction-transformer decoder. Transferring these general-purpose vision encoders to a specialized biological domain with a high-quality annotated dataset is what allows RADIX to generalize across species and imaging platforms. We train and evaluate it on the first expert-annotated benchmark of root anatomical structures at scale, comprising 1,695 high-quality fluorescence images spanning 17 monocot and dicot species, six anatomical structures, and three imaging platforms. RADIX segments all six structures at inter-annotator-level accuracy and generalizes to unseen species, genotypes, growth conditions, and an imaging platform from an independent laboratory. A single unified model surpasses monocot- and dicot-specialist models without sacrificing in-group accuracy. Predicted masks yield aerenchyma and suberin/lignin measurements matching expert annotation at ∼1.2 s per image with a single GPU, reducing weeks of manual analysis to minutes. Applying RADIX across genotypes, microbial treatments, and growth systems, we show that these cell type features form a coordinated, multidimensional, and context-dependent system shaped by genetic and environmental factors.
Why it matches plant phenotyping methods根の解剖学的構造を画像から自動抽出・定量する深層学習フレームワークを開発し、注釈付きベンチマークで検証しているため、植物フェノタイピング手法が中心である。
abstractQuantifying these structures at high resolution is a manual bottleneck that limits experimental scale.
Abstract Depth cameras measure the distance to a fruit's surface, whereas converting its silhouette into physical dimensions requires the depth of its center; corrections for this offset have so far been empirical, and therefore bound to the crop, sensor, and dataset they were fitted on. This paper derives the correction analytically. For a spherical fruit, integrating the surface-depth distribution over the visible hemisphere yields a closed-form sphere correction whose coefficient follows from sampling geometry, together with a theoretical justification of the median mask depth as the representative statistic. Combined with deep instance segmentation on RGB-D imagery of hydroponic melons, the empirically optimal coefficient coincided with the derived value, and the pipeline reached R 2 of 0.966 for fruit length (MAE 1.43 mm), 0.959 for width (1.84 mm), and 0.861 for end-to-end fresh weight (MAPE 4.6%). The analytical form made the measurement transferable. Applied unchanged to cylindrical mini-cucumbers, the pipeline held mm-level accuracy (width MAE 0.52 mm; fresh weight R 2 0.955 after coe cient refitting), with the correction's negligibility predicted in advance by an R / Z corollary; across active-stereo and time-of-flight cameras, the optimal coefficients proved non-interchangeable, identifying the coefficient as a physical parameter that absorbs geometry, sensor physics, and fruit shape. A field system that fuses and cross-verifies the two sensors, with an error-propagation confidence gate and parameterized grading logic, reproduced 2-3% fresh-weight error and 90.9% confirmed-judgment grading accuracy over four validation sessions in a commercial greenhouse unseen during development. Throughout, geometric components transferred unchanged while learned and regression components required recalibration - a boundary the model predicts and the system itself monitors.
Why it matches plant phenotyping methodsRGB-D画像と深度補正を用いて果実の寸法・重量を推定する手法を開発し、異なる果形・センサー・圃場で精度検証しており、植物表現型取得が中心である。
abstractThis paper derives the correction analytically.
Common beanLeafClassificationDisease symptoms / severity
Abstract Accurate recognition of plant leaf diseases from images is essential for intelligent agriculture and precision crop protection. However, reliable disease identification remains challenging because lesion regions often exhibit subtle visual differences, complex backgrounds, and large intraclass variations, especially when available disease samples are limited. To address these challenges, this study proposes PR-CNN, a deep learning framework that integrates convolutional neural networks, pyramid split attention, and a relation network for bean leaf disease image recognition. The convolutional backbone is first used to extract visual features from support and query images. Then, the pyramid split attention module enhances multiscale spatial and channel feature representation, enabling the model to focus on discriminative lesion regions while suppressing redundant background information. Finally, the relation network learns a nonlinear similarity metric between paired samples and generates relation scores for disease category prediction. Experimental results show that PR-CNN achieves an overall classification accuracy of 99.24% on the primary bean leaf disease dataset, outperforming representative models, including ResNet50, DenseNet, Inception v4, and EfficientNet B7, in terms of recognition accuracy and adaptability. In addition, PR-CNN was evaluated on four publicly available plant disease datasets, including CGIAR, Plant Diseases, LWDCD 2020, and Plant Pathology, achieving an average accuracy of 99.84%. These results demonstrate that PR-CNN can effectively improve image based plant disease recognition and provides a robust visual classification framework for intelligent crop disease diagnosis.
Why it matches plant phenotyping methods豆葉画像から病徴・病害を認識する深層学習手法を開発し、複数データセットで性能検証しており、植物の病害状態の画像ベース計測が研究の中心である。
abstractthis study proposes PR-CNN, a deep learning framework that integrates convolutional neural networks, pyramid split attention, and a relation network for bean leaf disease image recognition.
Plant phenotyping relevance match · UnverifiedCrossref · Europe PMC · OpenAlex · checked 15 Sept 2026
Grass seed crops are susceptible to yellow dwarf viruses transmitted by aphids. The Willamette Valley in Oregon, United States, is the leading producer of cool-season grass seed crops globally, and industry reports have attributed seed yield loss and shortened stand longevity to aphid-transmitted yellow dwarf viruses. Genetic resources are needed for effective and sustainable management of this pest, specifically the Rhopalosiphum padi–PAV pathosystem, in grass seed production to reduce foliar insecticide applications and maintain optimum seed yield potential. High-throughput phenotyping methods are needed to screen grass seed cultivars to identify resistant traits for traditional breeding programs. An automated video tracking procedure was optimized to evaluate host plant resistance in cool-season grass seed crops to R. padi–PAV with live plants and viruliferous and nonviruliferous aphid populations. Feeding behavior recorded with automated video tracking was strongly correlated with “ground-truthed” observations by human observers. Partial resistance (antixenosis and antibiosis) and tolerance traits were detected in select perennial ryegrass and tall fescue cultivars evaluated with traditional phenotyping methods in a greenhouse setting and with high-throughput phenotyping using automated video tracking in the laboratory. Across grass cultivars, nonviruliferous aphids had greater fitness and preference for noninfected grass plants compared with viruliferous aphids. Automated video tracking can be used as a high-throughput phenotyping method for continued evaluation of host plant resistance in grasses grown for seed production, as well as to identify resistant genotypes in other grass crops susceptible to aphid–yellow dwarf virus virus–vector systems.
Why it matches plant phenotyping methods自動動画追跡を用いてアブラムシ媒介ウイルスに対する植物抵抗性を高スループットに評価する手法を最適化・検証し、従来観察との相関および抵抗性形質の検出を示しており、表現型取得法が研究の中心である。
abstractHigh-throughput phenotyping methods are needed to screen grass seed cultivars to identify resistant traits for traditional breeding programs.
MaizeField / plotClassificationGrowth / development / phenology
Integrating precision agriculture (PA, a data-driven agricultural management system) with deep learning (DL) models can effectively support various activities, including yield prediction, crop health monitoring, field task automation, and decision-making. Taking advantage of such data-driven methodologies typically requires desktops, high-performance computing systems, and cloud clusters for data analysis, but their portability limits in-field applications. However, a single board computer, such as Raspberry Pi, offers a compact, lightweight, cost-efficient, easy-to-use, and feature-rich portable computing device which is ideal for in-field decision-making in PA applications. One such in-field application is crop growth stage classification for better crop management. Therefore, in this study, eight corn growth stages were classified using PhenoCam (near-surface [proximal] remote sensing network camera)imagery collected from ten PhenoCam sites. Four lightweight DL models were developed, ELiteCrop0, ELiteCrop1, ELiteCrop4, and MobNetCropV2, and evaluated across five image vertical clipping levels(0 %–40 %) using a supercomputer. The optimized model was subsequently deployed on a Raspberry Pi5 for edge inference. Model training accounted for the majority of the total CPU time, exceeding 97 %, while the testing times ranged from 0.01 min to 0.12 min, enabling real-time applications. Among the models, ELiteCrop0 achieved the most balanced performance with a confusion-matrix diagonal ratio(CMDR) of 0.93, followed by ELiteCrop1 (CMDR = 0.92). Overall, model performance decreased with increasing vertical clipping; therefore, a moderate image clipping (0 %–10 %) was recommended for improved computational efficiency. Analysis with a supercomputer produced an intrasite (same train sites)accuracy of 0.90–0.93 (Raspberry Pi: 0.78–0.81) and an intersite (new test sites) accuracy of 0.48–0.50(Raspberry Pi: 0.41–0.43), indicating challenges with model generalization. Raspberry Pi successfully processed ≈ 1000 images/min under safe operating conditions (68◦C). Future work should focus on extending the multi-site dataset to improve cross-site performance. Hence, this study presents a scalable and cost-effective solution for real-time corn growth stage monitoring in PA.
Why it matches plant phenotyping methodsトウモロコシの生育段階という植物状態をPhenoCam画像から推定する深層学習モデルを開発・評価し、Raspberry Piへ展開して性能検証しているため、フェノタイピング手法が中心である。
abstractTherefore, in this study, eight corn growth stages were classified using PhenoCam (near-surface [proximal] remote sensing network camera)imagery collected from ten PhenoCam sites.
leaf development was tracked dynamically from high-throughput phenotyping image series using the SAM-2 deep learning model, enabling automated segmentation and tracking of individual leaves across hundreds of plants from different accessions grown under different water and nitrogen conditions. From these time series, leaf-level growth dynamics were reconstructed and used to calculate key developmental traits, including phyllochron and relative expansion rates. These measurements were further integrated into the GreenLab model to infer plant-scale parameters such as radiation use efficiency (RUE) and leaf demand parameters. Statistical analyses revealed significant genotype, treatment, and interaction effects on several traits, with stable genotype rankings but contrasted sensitivities to environmental conditions. While whole-rosette growth captured strong and consistent responses, individual leaf contributions to global growth remained limited, highlighting the integrative nature of rosette-scale dynamics. Model-derived parameters provided additional insight into plant strategies, showing that genotypes differ in both the duration and timing of leaf demand, with generally stable patterns across environments. In parallel, QTL mapping was performed using leaf-level measurements and phyllochron traits. This analysis identified shared and trait-specific genetic loci, including loci associated with leaf emergence dynamics that were not detected using traditional rosette-scale integrative traits. Overall, this study demonstrates that combining deep learning-based image analysis with mechanistic modeling enables large-scale and quantitative characterization of plant development, providing biologically interpretable traits and new insights into their genetic and environmental determinism. It highlights the potential of combining high-throughput image-based phenotyping, deep learning, and mechanistic modeling to generate biologically interpretable traits and to assess genetic and environmental influences on these traits.
Why it matches plant phenotyping methods深層学習による葉の自動セグメンテーション・追跡を開発的に適用し、時系列画像から葉レベルおよび植物体レベルの発達形質を定量化しているため、表現型取得・抽出が研究の中心である。
abstractleaf development was tracked dynamically from high-throughput phenotyping image series using the SAM-2 deep learning model, enabling automated segmentation and tracking of individual leaves across hundreds of plants
Reproduction assets foundThe paper explicitly states that the authors' leaf segmentation software (AraLeaf_segmentation), the GreenLab Arabidopsis model (AraGreenlab), and the statistical analysis code (AraParameters_statistical_analyses) are open-source and publicly hosted on forge.inrae.fr, and that the data and results used in the paper areCode · publicThe leaf segmentation software (AraLeaf_segmentation) and the GreenLab model of Arabidopsis thaliana (AraGreenlab) are open-source software, and distributed under the GNU GPL v3 licence. The two software packages, and the code to run statistical analyses (AraParameters_statistical_analyses) are available at:https://forge.inrae.fr/phenoscope-public/plant_phenomics_suppmat.Open asset ↗phenoscope-public/plant_phenomics_suppmathtml-lines:419-444Plant phenotyping relevance match · UnverifiedEurope PMC · checked 5 Sept 2026
Germination percentage is an endpoint measure and therefore does not describe when an individual seed begins visible growth or how rapidly its radicle and plumule expand. We developed a time-resolved phenotyping workflow to quantify rice seed germination continuously in shallow-water culture. A single industrial camera moved along a 1 m rail and imaged three culture boxes at 1 h intervals for up to 80 h. The archive comprised 1,062 full-frame images and 6,372 seed-level repeated observations under the six-seed field-of-view configuration. A physical grid maintained seed identity through time and enabled individual regions of interest to be extracted. Whole-seed foregrounds were obtained with a pretrained U 2 -Net, and a masked RGB intensity rule separated newly emerging tissue from the darker hull. For each tracked seed, projected emerging-tissue area and interval growth rate were calculated. Three representative normally germinating seeds first showed measurable tissue at 48 h, yet subsequently followed distinct trajectories: final projected areas ranged from 2,605 to 4,700 pixels and peak interval growth rates ranged from 106.88 to 287.92 pixels h −1 . B-1 accumulated 63.71% of its final visible area during 72–80 h, whereas B-3 accumulated 73.51% during 60–72 h. Thus, seeds with the same observed emergence interval can differ substantially in the timing and magnitude of post-emergence expansion. The workflow converts repeated images into biologically interpretable temporal phenotypes and provides a basis for nondestructive studies of rice seed vigor and germination heterogeneity.
Why it matches plant phenotyping methods連続画像から個々のイネ種子の発芽・組織面積・成長速度を抽出する時間分解フェノタイピングワークフローを開発しており、表現型取得と解析手法が研究の中心である。
abstractWe developed a time-resolved phenotyping workflow to quantify rice seed germination continuously in shallow-water culture.
Citrus Huanglongbing (HLB) is one of the most destructive citrus diseases worldwide, and early diagnosis remains challenging because uneven pathogen distribution often leads to false-negative PCR results. Here, a paper-based nanozyme sensor array was developed for volatile organic compound (VOC) chemical fingerprinting of HLB-associated citrus samples. Fe/Al bimetallic NH₂-MIL-53 nanozymes were designed to regulate VOC adsorption and peroxidase-like catalytic activity. Exposure of the nanozyme sensors to VOCs reduced the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB), generating concentration-dependent colorimetric responses. By tuning the Fe/Al ratio, the nanozymes exhibited differentiated responses toward HLB-associated volatiles, including methyl salicylate, phenylacetaldehyde, and linalool, with recognition limits of 0.1-0.5 ppm. Integration with two MOF-based sensing channels formed a five-channel artificial olfactory array capable of generating multidimensional color fingerprints. The sensor array successfully discriminated healthy, asymptomatic, and infected citrus leaf samples, achieving an overall classification accuracy of 92.5%. These results suggest that the proposed platform provides a simple and low-cost approach for citrus VOC chemical fingerprinting and may provide useful information for quality-related screening in citrus production systems, while further field-oriented validation is still needed to assess its practical applicability.
Why it matches plant phenotyping methods柑橘葉のHLB感染状態をVOCセンサーアレイで識別する計測・解析法の開発が研究の中心であり、植物病害状態を直接推定している。
abstractHere, a paper-based nanozyme sensor array was developed for volatile organic compound (VOC) chemical fingerprinting of HLB-associated citrus samples.
Field / plotLeafStem / branchPhysiological trait estimationGrowth / time-series analysisStress response / toleranceWater status / transpiration
Live fuel moisture content is a key determinant of live fuel flammability, yet its destructive and discontinuous measurement limits high-temporal-resolution monitoring. This study evaluated whether leaf electrical potential can serve as a non-invasive proxy for LFMC and flammability-related traits under natural drought conditions. From February to July 2025, leaf and trunk electrical potentials were monitored weekly in Salvia rosmarinus individuals from a Mediterranean shrubland, while LFMC, essential oil yield, fatty-acid fraction, and laboratory-based flammability metrics-ignition time, combustion duration, and flame height-were assessed bi-weekly. Leaf electrical potential was strongly associated with LFMC (R 2 = 0.64, p < 0.001), decreasing as plants underwent seasonal drought-induced dehydration. Periods of high temperature and low rainfall reduced both LFMC and electrical potential, coinciding with shorter ignition times, which declined to approximately 20-30 s during the driest period. Based on the observed shifts in ignition time, combustion duration, and flame height, three empirical LFMC response zones were identified, with leaf electrical potential closely tracking transitions in plant hydration and flammability. These results suggest that plant electrophysiology may provide a promising non-invasive indicator of live fuel water status and seasonal flammability dynamics, with potential applications in wildfire risk monitoring when combined with conventional LFMC, meteorological, and remote-sensing approaches.
Why it matches plant phenotyping methods葉の電気的電位をLFMC（水分状態）および可燃性関連形質の非破壊・連続的な指標として評価しており、植物状態の取得方法の検証が研究の中心である。
abstractThis study evaluated whether leaf electrical potential can serve as a non-invasive proxy for LFMC and flammability-related traits under natural drought conditions.
Abstract Crop diseases pose significant challenges to productivity in resource-constrained settings, often remaining undiagnosed when diagnostic tools and infrastructure are either non-existent or inadequate. Current crop disease diagnosis relies on manual inspection methods that are labor-intensive, prone to error, and incapable of delivering real-time or region-specific insights in the process. Such limitations call for developing advanced diagnostic systems that are scalable and efficient in resource-constrained settings. This research introduced a comprehensive multi-spectral imaging and machine learning framework that can easily revolutionize the disease diagnosis and management inside the low-resource farming communities. Built within its core is the 3D Spectral-Spatial Convolutional Neural Network (3D SSCNN) that extracts high-resolution spectral-spatial features from hyperspectral image cubes. The accuracy achieved is around ~ 95% within 0.3 s per sample. Fed-DiagNet has provided support for distributed training that enables scalability and also data privacy to enhance the accuracy of regional models at approximately 92% as well as reduces training by almost 40%. Temporal disease progression modeling is enabled by Temporal Progression LSTM that provides dynamic trends with 90% accuracy up to a horizon of 10 days. This means that in addition to integrating disparate data sources-including hyperspectral imagery, environmental data, and pest observations-MTAN achieves an almost ~ 93% stress identification accuracy. Lastly, an RL-FO system tailors its treatment recommendations to local conditions so as to optimize for yield improvement and cost-effectiveness. With the proposed system, diagnostic precision increases to ~ 94%, and it is manifested in real-time efficiency while supporting scalability with actionable insights to empower farmers to mitigate crop losses and augment food security across several scenarios.
Why it matches plant phenotyping methods植物病害の状態をマルチスペクトル画像から推定する画像・機械学習フレームワークの開発が研究の中心であり、植物フェノタイピング手法に該当する。
abstractThis research introduced a comprehensive multi-spectral imaging and machine learning framework that can easily revolutionize the disease diagnosis and management inside the low-resource farming communities.
Reproduction assets foundThe paper's Data Availability statement points to two public repositories containing the data analyzed: a Kaggle PlantVillage dataset and a GitHub hyperspectral datasets repository. No author code or models are explicitly deposited.Dataset · publicAll data analyzed during this study are available in the Kaggle and Github repository, in the links https://www.kaggle.com/datasets/rohithaaiswarya/plant-village and https://github.com/antmedellin/HyperspectralDatasets .Open asset ↗Kaggle · rohithaaiswarya/plant-villagelines:563-583Dataset · publicAll data analyzed during this study are available in the Kaggle and Github repository, in the links https://www.kaggle.com/datasets/rohithaaiswarya/plant-village and https://github.com/antmedellin/HyperspectralDatasets .Open asset ↗GitHub · antmedellin/HyperspectralDatasetslines:563-583Plant phenotyping relevance match · UnverifiedOpenAlex · Crossref · checked 15 Sept 2026
Field / plotMultimodalNeRF / 3D Gaussian SplattingLiDAR / point cloudRGB / grayscaleStereoFruitWhole plant / canopy / plot / fieldMorphology / geometry measurementObject detection
Binocular stereo vision is a low-cost and scalable 3D perception technology that shows strong potential in agricultural phenotyping and smart agriculture. By estimating depth from multi-view RGB images, it enables non-contact, high-precision sensing of crop structure, canopy morphology, growth dynamics, and livestock traits, providing essential support for digital and intelligent agricultural production. With recent advances in deep learning-based stereo matching, multimodal sensor fusion, and 3D reconstruction, its robustness and accuracy in complex field environments have been significantly improved. This paper systematically reviews recent progress in agricultural applications of binocular stereo vision, covering system architectures, traditional and deep learning-based stereo matching methods, point cloud reconstruction techniques, and emerging supervision strategies such as 3D Gaussian splatting. It further summarizes key applications, including high-throughput phenotyping, fruit localization and robotic harvesting, weed detection and precision spraying, autonomous navigation, and livestock body condition assessment, highlighting its role in multi-task agricultural perception systems. Finally, the paper discusses major challenges, including low-texture matching difficulty, occlusions in complex environments, cross-domain generalization, real-time lightweight deployment, and limited dataset availability. Future directions are outlined in foundation model-based visual perception, self- and weakly supervised learning, multimodal fusion, and edge-efficient model design, aiming to support large-scale deployment in smart agriculture.
Why it matches plant phenotyping methods農業における双眼ステレオビジョンのシステム、ステレオマッチング、3D再構成を体系的にレビューし、作物構造・群落形態・生育動態の非接触計測とハイスループット表現型解析を主要対象としているため。
abstractThis paper systematically reviews recent progress in agricultural applications of binocular stereo vision, covering system architectures, traditional and deep learning-based stereo matching methods, point cloud reconstruction techniques
Background: Plant diseases significantly threaten global food security, reducing potential harvests and sometimes causing total crop failure. Traditional detection methods, which rely on manual inspection and laboratory testing, are time-consuming, costly and prone to human error. Methods: To address these challenges, this study applies transfer learning techniques using deep convolutional neural networks for accurate and efficient plant disease detection. A comparative analysis of nine pretrained models, VGG16, VGG19, ResNet50, ResNet101V2, MobileNetV2, InceptionV3, DenseNet121, InceptionResNetV2 and Xception was conducted on the PlantVillage dataset, focusing on apple, potato and peach leaf images. Result: Results show that DenseNet121 and ResNet101V2 achieved the highest accuracy, particularly for potato leaves with 98.5%, while MobileNetV2 also performed well with up to 99% accuracy for apple and peach leaves. The study demonstrates that transfer learning effectively enhances plant disease classification, enabling faster, more reliable and resource efficient detection for precision agriculture.
Why it matches plant phenotyping methods植物葉画像から病害状態を推定する深層学習手法を比較評価しており、病害表現型の取得・分類が研究の中心である。
abstractthis study applies transfer learning techniques using deep convolutional neural networks for accurate and efficient plant disease detection.
Existing plant-disease datasets target classification and detection, leaving vision-language models unable to support interactive, reasoning-based diagnosis. To address this, we present PlantExpertVQA, a large-scale visual question answering (VQA) dataset designed to advance vision-language models for agricultural decision-making. It is compiled from 45 open-source datasets, including the widely used PlantVillage corpus, and comprises 765,186 high-quality question-answer (QA) pairs grounded over 150,841 images spanning 38 crop species and 89 disease conditions. Questions are organized into 3 levels of cognitive complexity and 9 distinct categories. Each was phrased following expert guidance and generated via an automated two-stage pipeline: template-based QA synthesis from image metadata, followed by multi-stage linguistic re-engineering. The dataset was iteratively reviewed by domain experts for scientific accuracy and relevance. We find that current frontier vision-language models, including recent open-source instruction-tuned multimodal LLMs, perform poorly on PlantExpertVQA. However, parameter-efficient fine-tuning of a compact 2B-parameter model on a small fraction of the dataset yields substantial improvements across all question categories, demonstrating its effectiveness for domain adaptation.
Why it matches plant phenotyping methods植物病害画像を対象とする大規模VQAデータセットの構築・ベンチマークが研究の中心であり、植物の病害状態を画像から評価する再利用可能なデータセットです。
abstractwe present PlantExpertVQA, a large-scale visual question answering (VQA) dataset designed to advance vision-language models for agricultural decision-making.
Reproduction assets found保存済みの本文根拠を更新済みルールで再検証し、公開資産1件を確認しました。Code · publicThe code for the programmatic QA generation pipeline, the data-refinement and template-paraphrasing steps, the automated outlier-detection pipeline, and the parameter-efficient fine-tuning experiments reported in this work is publicly available at https://github.com/syed-nazmus-sakib/PlantExpertVQA.Open asset ↗syed-nazmus-sakib/PlantExpertVQAhtml-lines:578-597Plant phenotyping relevance match · UnverifiedEurope PMC · checked 15 Sept 2026
Published10 Aug 2026International journal of biological macromoleculesCited by 0 · OpenAlex ↗
Starch, a key biological macromolecule accounting for 50-80% of dry weight in sweetpotato (Ipomoea batatas [L.] Lam.) storage roots, underpins food and industrial applications. However, sweetpotato starch characterization is limited by local-sectioning approaches that fail to capture the whole-root granule dynamics. Here, we established a new morphological observation system covering three key root regions based on two representative cultivars: Okinawa 100 (V100), and Yanshu25 (Y25). It was effective and convenient for in situ starch observation and analysis in sweetpotato roots. The whole-root in situ microscopy, starch physicochemical profiling, and transcriptomic correlation were integrated to resolve starch dynamics in Y25 and V100. We identified widespread simple starch granules (SSGs)-compound starch granule (CSG) coexistence across the whole root tissues, with Y25 exhibiting programmed CSG fragmentation driven by ARCs/FtsZ-mediated amyloplast envelope destabilization and concomitant AMY/BMY upregulation. Y25 had a higher amylose content and a higher proportion of medium/long chains, but the average degree of polymerization was slightly lower. Transcriptomic analyses revealed that the differentially expressed genes were annotated in pathways of carbohydrate metabolism, and the differentially expressed genes in the starch metabolism pathway were analyzed. Weighted gene co-expression network analysis further identified the hub genes from different modules and analyzed the co-expression networks. This work will not only advance the understanding of starch granule assembly and remodeling in sweetpotato, but also provide a robust methodological and transcriptome-guided framework for starch-focused germplasm screening and quality improvement.
Why it matches plant phenotyping methodsサツマイモ根全体のデンプン粒形態・動態を観察する新しい形態観察システムを構築し、その有効性を示しており、表現型取得法が研究の中心である。
abstractHere, we established a new morphological observation system covering three key root regions based on two representative cultivars: Okinawa 100 (V100), and Yanshu25 (Y25).
Herein, we rationally designed and synthesized two types of D-π-A red-emitting fluorescent probes with intrinsic intramolecular charge transfer (ICT) and twisted intramolecular charge transfer (TICT) characteristics, for traditional methods for lipid droplet detection in food crops suffer from reliance on bulky instruments, tedious sample pretreatment and the impossibility of on-site quantification. To modulate the molecular skeleton, methoxy groups were introduced, and highly specific recognition of lipid droplet microenvironments was realized through the probes' synergistic spectral response to polarity and viscosity. Typical turn-on fluorescence responses and favorable lipophilicity were displayed by both probes, thus enabling accurate localization of the hydrophobic domains of lipid droplets. Possessing ratiometric fluorescence performance, the modified probe OCH 3 -Phe-FCN efficiently alleviated signal interference from complex matrices, and toward oleic acid was a lower limit of detection presented. By combining smartphone-based RGB colorimetry and image grayscale analysis was a portable detection platform constructed, with fluorescence signals employed to accomplish visual analysis of lipid droplets in food crops. Satisfactory biocompatibility and targeting capability were validated for the as-prepared probes via cell imaging and cytotoxicity evaluations, and far superior imaging quality and signal-to-noise ratio were demonstrated by the modified probe. With the aid of density functional theory (DFT) calculations, systematically elucidated was the spectral mechanism of excited-state transitions synergistically modulated by the two microenvironmental factors. Not only does this work deepen the insight into the response mechanism of dual-responsive fluorescent probes, but also a promising technical strategy is offered for in situ spectral detection of lipid droplets in food crops.
Why it matches plant phenotyping methods食品作物の脂質滴を蛍光プローブとスマートフォン画像解析で可視化・定量する検出法および携帯型プラットフォームの開発が中心であり、植物の細胞状態を測定する技術的貢献が明確です。
abstractBy combining smartphone-based RGB colorimetry and image grayscale analysis was a portable detection platform constructed, with fluorescence signals employed to accomplish visual analysis of lipid droplets in food crops.
Sorghum (Sorghum bicolor L. Moench) is a major cereal in water-limited environments. Its C4 carbon-concentrating pathway suppresses photorespiration and supports comparatively high photosynthetic and water-use efficiency at high temperature, although yield remains sensitive to the timing and intensity of drought. This systematic review critically evaluates how coordinated variation in phenology, canopy development, transpiration regulation, photosynthetic resilience and root-mediated water capture can be phenotyped for sorghum improvement. The review was conducted and reported in accordance with the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 statement. Eligible primary studies examined sorghum drought physiology, sensing-based phenotyping, trait retrieval, root-associated water capture, or breeding applications. Following duplicate removal and title, abstract and full-text screening, 45 sorghum-specific studies were included. Owing to substantial heterogeneity in experimental design, drought treatment, sensing platform, target trait, and validation metric, evidence was synthesised narratively rather than by meta-analysis. We compare sorghum studies across Light Detection and Ranging (LiDAR), multi-spectral, hyperspectral, thermal, structural, and fluorescence sensing, with emphasis on reported accuracy, transferability and physiological interpretation. We then examine how PROSAIL (PROSPECT coupled with Scattering by Arbitrarily Inclined Leaves) and SCOPE (Soil Canopy Observation, Photochemistry and Energy Fluxes) can be constrained for sorghum canopies and combined with machine learning. The central contribution is a sorghum-specific framework that distinguishes directly observed or model-retrieved canopy traits from indirect root-function predictions requiring ground validation. The synthesis identifies practical routes for measuring functional stay-green, high-vapour-pressure-deficit responses and post-anthesis water capture, while defining priorities for cross-environment validation and breeding deployment.
Why it matches plant phenotyping methodsソルガムの干ばつ適応に関するセンシング型フェノタイピング手法を体系的にレビューし、形質推定の精度・移植性・検証、およびモデルと機械学習の統合を扱うため、方法論が中心である。
abstractThis systematic review critically evaluates how coordinated variation in phenology, canopy development, transpiration regulation, photosynthetic resilience and root-mediated water capture can be phenotyped for sorghum improvement.
LiDAR (Light Detection and Ranging) and RGB-D camera imaging have emerged as essential tools in agricultural applications, particularly for plant size and distance measurements, enabling non-destructive, cost-effective, and precise estimation. The objective of this study was to measure the plant canopy dimensions and distance between apples using commercial LiDAR, and an RGB-D camera with a speed sprayer platform was used to determine whether LiDAR provides a higher measurement accuracy under field conditions. Data were collected in an apple orchard in Muju, Republic of Korea. Commercial 3D LiDAR, a terminal box, an RGB-D camera, a microcontroller, a power supply, and individual display monitors were integrated into a customized data acquisition (DAQ) box for LiDAR point cloud (PCD), RGB, and depth imagery data collection. Commercial software was used for data acquisition, data conversion (pcap to PCD), segmentation of regions of interest (ROI), and pre-processing of data. PCD processing and measurement consisted of data frame selection, data conversion, outlier removal, downsampling, denoising, ground point removal by filtering, voxelization, and density map generation using an open access programming language script. Depth image processing included importing raw data, shaping metadata using intrinsic camera parameters, visualizing depth images, extracting depth points, and measuring the plant canopy at the pixel level. RGB image analysis involved grayscale conversion, thresholding, segmentation of ROI, contour preparation, noise removal, and binary masking for eliminating the background. Estimated results were compared to measured results. LiDAR measurements showed the closest agreement with the measured results for plant height, canopy volume, plant spacing, and row distance, outperforming both RGB and depth imaging. Under field conditions, plant spacing and row distance were estimated with accuracies of 97.5% and 94.7%, respectively, exhibiting higher measurement accuracies than RGB and depth imagery data results. Despite some discrepancies due to complex plant geometry and dynamic data collection, the results support data collection strategies critical for precision horticulture.
Why it matches plant phenotyping methodsLiDARとRGB-D画像を用いたリンゴ樹の樹冠寸法・体積・樹間距離・列間距離の取得と精度比較が研究の中心であり、植物表現型計測手法の開発・検証に該当する。
abstractThe objective of this study was to measure the plant canopy dimensions and distance between apples using commercial LiDAR, and an RGB-D camera with a speed sprayer platform was used to determine whether LiDAR provides a higher measurement accuracy under field conditions.
Field / plotLiDAR / point cloudStem / branchYield / biomass estimationBiomass / plant weight
Integrating ground-based and aerial remote sensing for individual tree-level stem volume modeling remains underexplored in Mediterranean mixed forests, despite the growing need for cost-effective, automated forest inventory approaches. This study evaluated the combined use of Handheld Laser Scanning (HLS) and Unmanned Aerial Vehicle (UAV)-based Structure from Motion (SfM) photogrammetry for individual-tree stem volume modeling in a mixed stand in Castilla y León, Spain, dominated by Pinus halepensis, Pinus pinea, Quercus faginea, and Cupressus sempervirens. Two open-source HLS processing tools; the Forest Structural Complexity Tool (FSCT) and 3D Forest Inventory (3DFin), were compared for individual tree attribute extraction, with FSCT outperforming 3DFin across all species. Reference stem volumes were derived by applying species-specific Spanish National Forest Inventory (SNFI) allometric equations to FSCT-extracted diameter and height values. Random Forest models were then built using UAV-SfM crown metrics as predictors, testing two image overlap configurations: 80 × 80 F (80% front and side overlap) and 80 × 60 CF (80% front, 60% side, cross-flight). The 80 × 80 F configuration produced the best-performing model (R2 = 0.730), with 80 × 60 CF achieving comparable accuracy (R2 = 0.688), results confirmed by spatially independent leave-one-plot-out cross-validation (LOPO-CV R2 = 0.627 and 0.613, respectively). These results show that combining HLS and UAV-SfM through a predominantly open-source workflow offers a viable, reproducible approach to stem volume modeling in structurally complex Mediterranean mixed forests.
Why it matches plant phenotyping methodsHLSとUAV-SfMを用いて個体樹の直径・樹高から幹材積を推定する再現可能な計測・解析ワークフローを構築し、複数ツールと飛行条件を比較検証しているため、植物表現型取得が中心である。
abstractIntegrating ground-based and aerial remote sensing for individual tree-level stem volume modeling remains underexplored
The tomato plant is considered one of the most important crops in the world, yet it is vulnerable to various diseases that affect crop quality and agricultural productivity. These challenges have driven the need for an efficient and intelligent plant disease detection system. With the development of computer vision and artificial intelligence, this proposed methodology based on deep learning for tomato leaf diseases has been presented. Two public datasets: Taiwan DS with nine classes and Tomato Leaf Diseases Detection Computer Vision Dataset (TLDDCV DS) with seven classes have been used to test this system. This system begins with plant image processing, which includes gamma correction and bilateral filtering, to enhance image quality and clarity while preserving key disease features. Then, a genetic metaheuristic algorithm was used to automatically select the most significant hyperparameters, further optimizing both processing time and accuracy. After that, the tomato leaf disease detection applies the You Only Look Once version 11 Nano (YOLOv11n) model. The YOLOv11n backbone is edited through a Data-efficient Image Transformer (DeiT) to improve the system's capacity for learning global contextual information and long-range dependencies. Experimental results demonstrate that the proposed system outperforms existing methods. It achieved an average mAP@50 of 97.8%, mAP@50-95 of 93.4%, precision of 97.3%, recall of 93.8%, and F1-score of 95.5% on the Taiwan dataset. Additionally, it achieved an average mAP@50 of 87%, mAP@50-95 of 48%, precision of 83.9%, recall of 70.3%, and F1-score of 76.4% on the TLDDCV dataset. These results demonstrate the generalizability and effectiveness of the proposed system in real-world agricultural situations.
Why it matches plant phenotyping methodsトマト葉の病徴を画像から検出・分類する深層学習手法の開発と2データセットでの性能評価が研究の中心であり、植物病害状態のフェノタイピングに該当する。
abstractthe tomato leaf disease detection applies the You Only Look Once version 11 Nano (YOLOv11n) model.
Reproduction assets foundThe paper uses two public Roboflow tomato leaf disease image datasets and states its source code is publicly available on Zenodo, all with explicit availability statements and URLs.Dataset · publicThe first dataset is the Taiwan dataset, which can be found at the following link: (https://universe.roboflow.com/bryan-b56jm/tomato-leaf-disease-ssoha).Open asset ↗tomato-leaf-disease-ssohalines:317-328Dataset · publicThe second dataset is the TLDDCV dataset, which can be found at the following link: (https://universe.roboflow.com/sylhet-agricultural-university/tomato-leaf-diseases-detect)Open asset ↗tomato-leaf-diseases-detectlines:317-328Code · publicThe source code of the proposed framework, including the implementation of the proposed methodology and experimental setup, is publicly available in the Zenodo repository: https://doi.org/10.5281/zenodo.20777853 .Open asset ↗Zenodo · 10.5281/zenodo.20777853lines:317-328Plant phenotyping relevance match · UnverifiedCrossref · checked 5 Sept 2026
Crop straw-to-grain ratio (SGR) estimation underpins regional straw resource assessment, yet national inventories rely on fixed coefficients that ignore structured variation across variety, environment, and phenotype. We introduce a Structured Multi-Kernel Heteroscedastic Gaussian Process (GP) framework that models SGR variation through three additive kernels heuristically motivated by the genotype–environment–phenotype (G+E+P) framework—capturing variety-associated variation, spatially structured variation, and environmental and management covariates—and employs an input-dependent noise model for prediction-specific uncertainty quantification. To prevent information leakage, target encoding and feature scaling are recomputed within each cross-validation fold. Evaluated via internal leave-one-out cross-validation on 80 rice samples (42 varieties, six Chinese provinces), the model achieves R2=0.541 with a prediction interval coverage probability of 0.95. Ablation identifies variety-associated variation as the largest contributor among the modeled factors (ΔR2=−0.024) and the multi-kernel design, by incorporating variety-specific information, substantially improves upon a covariate-only RBF GP (ΔR2=0.103). On point-prediction accuracy, Gradient Boosting achieves R2=0.58, slightly ahead of the Heteroscedastic GP (R2=0.54), underscoring that the primary advantage of the GP lies in its input-dependent uncertainty quantification. However, leave-one-county-out validation yields R2≈0 (with σ escalating to 24.4), confirming that the model does not yet generalize to unsampled counties; all reported performance is therefore internal to the nine sampled counties. The framework couples an agronomically motivated additive kernel structure with input-dependent uncertainty quantification, offering a path toward uncertainty-aware prediction from small field datasets.
Why it matches plant phenotyping methods作物のわら・穀粒比という植物関連形質を対象に、不確実性定量化を備えた予測手法を開発・検証しており、単なるルーチン測定ではなく計算的な形質推定が中心である。
abstractWe introduce a Structured Multi-Kernel Heteroscedastic Gaussian Process (GP) framework that models SGR variation
Brassica juncea (Mustard) is one of the most economic seed vegetable crops of the world, playing a major role in the production of world edible oil and the agricultural economy. The third-largest producer is India, which had an area under cultivation of about 8.6 million hectares of Mustard in 2021 22, and annual revenue of over USD 5 billion in 2021 22. Nevertheless, the presence of diseases like Alternaria Leaf Spot, White Rust, Powdery Mildew, and Septoria Leaf Spot threatens yield and quality by up to an estimated 2070% loss every year, based on the severity of the disease, and thus economic losses are estimated at over USD 1.5 billion per year in India alone. Traditional diagnostic systems are based on a manual examination of an agronomist trained to look at the sample and make a judgment, which is time-consuming, subjective, and subject to human error. Current deep learning methods of automated disease detection, promising as they are, are prone to inaccuracies on complex disease patterns, poor uncertainty estimation that is essential in real-world implementation, and poor generalizability to different field conditions. In response to these drawbacks, Swin-BNN-RF, a hybrid framework that combines Swin Transformer as a hierarchical attention-based feature extractor, Bayesian Neural Network (BNN) with symmetrized posterior as a probabilistic learner, and a Random Forest (RF) as an ensemble classifier, is proposed in this study. The Swin Transformer also harnesses local and global spatial biases with its shifted window self-attention network, and it is able to extract better features on leaf images of high-resolution. The uncertainty estimates of the BNN component are trusted, and unambiguous predictions are highlighted to get the opinion of the human expert. Random Forest classifier uses the bagging and boosting ensemble methods to improve stability and the robustness of the classification. A large dataset was experimented with; it consisted of more than 10,000 samples per category of disease in four diseases. In the case of binary classification, the proposed model was 98.32% accurate, 98.52% precise, 98.70% recall, and 98.36% F1. On multi-class classification, it obtained 97.50, 97.82, 98.51, and 97.46 accuracy, precision, recall, and F1 score, respectively, which showed consistent performance in comparison with state-of-the-art models such as EfficientNet, MobileNet, and Residual Networks. The contribution of each component is verified by the Ablation studies and statistical analysis of significance (p
Why it matches plant phenotyping methodsマスタード葉の画像から病害状態を推定する深層学習フレームワークを開発・評価しており、植物病害表現型の取得・分類手法が中心である。
abstractSwin-BNN-RF, a hybrid framework that combines Swin Transformer as a hierarchical attention-based feature extractor, Bayesian Neural Network (BNN) with symmetrized posterior as a probabilistic learner, and a Random Forest (RF) as an ensemble classifier, is proposed in this study.
Key messages High-accuracy NIRS models and GWAS identified a novel QTL qPO-A07-1. GhMYB86 was validated to enhance seed protein content and fiber strength, and a functional KASP marker was developed. Cottonseed is rich in protein and oil; improving its nutritional quality is vital for global food security. In this study, near-infrared spectroscopy (NIRS) models were developed for predicting cottonseed protein and oil content using least absolute shrinkage and selection operator (LASSO) regression, achieving validation R 2 of 0.969 (P -4 ). A novel stable quantitative trait locus (QTL), qPO-A07-1, was detected, within which GhMYB86 was prioritized as a candidate gene. This gene exhibited higher expression in high-protein-content varieties during ovule development. Heterologous overexpression in Arabidopsis thaliana increased seed protein content by 2.61-3.34%, whereas expression in Saccharomyces cerevisiae increased protein content by 25.81% and reduced triglyceride content by 30.72% in comparison with the control. These results demonstrate that GhMYB86 positively regulates protein content while negatively affecting oil content. A kompetitive allele-specific PCR (KASP) marker targeting a promoter A/T polymorphism revealed that the AA allele was associated with higher-protein content, lower-oil content, and increased fiber strength across both mapping and validation populations. Furthermore, the protein content- and fiber strength-favorable allele has undergone positive selection during breeding. This study provides phenotyping tools, reliable genetic resources and a molecular marker for cottonseed nutritional quality breeding, laying a foundation for the improvement in cottonseed protein content and fiber strength.
Why it matches plant phenotyping methods綿実のタンパク質・油含量を推定するNIRSモデルを開発・検証しており、植物形質取得法が研究の中心的貢献である。GWASや遺伝子検証も行うが、NIRSによる形質推定が明確な方法論的役割を持つ。
abstractHigh-accuracy NIRS models and GWAS identified a novel QTL qPO-A07-1.
Background The quantification of fungal spores constitutes a fundamental metric in phytopathology, serving as the primary variable for inoculum standardization and being used as a proxy for disease severity. Historically, spore quantification has relied on manual hemocytometry, which remains the most precise counting process to date, where chambers such as the Malassez slide are used to count a subsample of the inoculum. However, this method applied manually is highly labor-intensive, time-consuming, and can be prone to operator-dependent variability. To overcome these limitations, we introduce MIRA (Microscopy Image Recognition & Analysis), a novel open-source software integrating You Only Look Once (YOLO) deep learning algorithms. Featuring a user-friendly graphical interface, MIRA is adaptable to multiple camera systems and supports advanced object detection models, including YOLOv11 and YOLOv26. Results We demonstrate that MIRA can be used to accurately detect and count spores from several phytopathogenic fungi, automatically measure spore surface area, and to differentiate spores across different genera. In an exhaustive comparative analysis using Pyricularia oryzae spores as an example, MIRA was benchmarked against manual gold-standard counting slides (Malassez and Kova) and indirect spectrophotometric methods (SPARK). The P. oryzae model loaded via MIRA achieved a strong correlation (R = 0.96) with manual gold standards while reducing processing time by over 90% for high-concentration samples (10⁶ spores/mL). Beyond this benchmark, we also successfully tested specific YOLO models designed to recognize macro- and microconidia of Fusarium oxysporum f. sp. cubense , a model for Pseudocercospora fijiensis , and a single multiclass model capable of identifying six different rice pathogenic fungi. We provide comprehensive tutorials for operating the software and training custom detection models for free using Roboflow and Google Colab. MIRA is available both as open-source Python code and as standalone executables for Windows and Linux. Conclusions MIRA provides a rapid, accurate, and highly reproducible alternative to manual spore counting, effectively removing a major bottleneck in phytopathology workflows. By combining advanced YOLO-based deep learning with an accessible interface and comprehensive training resources, MIRA makes accessible automated image analysis for researchers without programming expertise. Moreover, MIRA drastically improves the efficiency of high-throughput disease phenotyping and can be adapted for a wide range of microscopic quantification tasks across various biological disciplines.
Why it matches plant phenotyping methods植物病害に関わる胞子の画像検出・計数・サイズ測定ソフトウェアを開発し、手動計数法とのベンチマーク検証も行っている。病害フェノタイピングのための画像解析手法が中心である。
abstractwe introduce MIRA (Microscopy Image Recognition & Analysis), a novel open-source software integrating You Only Look Once (YOLO) deep learning algorithms.
Accurate detection of small-target diseases on apple leaves is of great importance for optimizing orchard management and facilitating precision agriculture. Small-target disease detection remains challenging due to insufficient features and complex backgrounds. This work proposes an effective detector for apple leaf small-target diseases called ALSDet. The global context module is integrated into Stage2 to Stage4 of the ResNet-50 backbone, yielding a refinement of the feature-extraction architecture. In the bottleneck blocks of the Stage2 and Stage3, dilated convolution is used in place of the normal 3×3 convolution to enlarge the receptive field for small targets and strengthen feature extraction. During the model training phase, a multi-scale training strategy combined with the online hard example mining method is adopted to focus on learning hard samples and enhance adaptability for various scale targets. According to the experimental results, ALSDet obtains a mean average precision (mAP) of 65.6% and an average recall (AR) of 71.2% on the dataset. The proposed model achieves the highest levels in both mAP and AR when compared to the popular object detection models, such as Cascade R-CNN, Faster R-CNN, GFL, Grid R-CNN, Libra R-CNN, FCOS, VFNet, RetinaNet, SSD, YOLOv7, and YOLOv8. For small-target diseases like rust and frog eye leaf spot, the average precision surpasses 87% with an intersection over union (IoU) threshold of 0.5. These results confirm that ALSDet achieves stable performance against existing methods, demonstrating its potential as a practical tool for intelligent orchard disease management.
Why it matches plant phenotyping methodsリンゴ葉の病斑を画像から検出する深層学習モデルを開発・比較評価しており、植物の病害状態の取得・推定が研究の中心である。
abstractThis work proposes an effective detector for apple leaf small-target diseases called ALSDet.
Accurate assessment of crop water status is critical for precision irrigation and sustainable water management in agriculture. This study develops a UAV-based thermal infrared inversion framework for high-resolution canopy temperature retrieval and irrigation decision support in tea plantations. The proposed approach integrates multi-frame image mosaicking, threshold-based canopy extraction, and a gray-temperature calibration model to generate spatially continuous canopy temperature maps. Crop water stress was quantified using the Crop Water Stress Index (CWSI), and its reliability was further evaluated by analyzing its relationship with stomatal conductance. The framework further estimates soil moisture status and irrigation requirements based on a threshold-based irrigation strategy. The results show that the linear gray-temperature calibration model achieved a maximum absolute error of less than 0.3 °C and that the calculated CWSI and estimated irrigation requirement were strongly correlated with measured stomatal conductance, with R 2 up to 0.91. The proposed method provides a practical technical workflow from UAV thermal imagery acquisition to canopy temperature retrieval and quantitative irrigation decision-making, demonstrating its potential for precision irrigation management in tea plantations.
Why it matches plant phenotyping methodsUAV熱画像から茶園の樹冠温度と水ストレスを推定する取得・抽出・較正手法を開発し、気孔コンダクタンスとの関係で検証しており、植物状態の計測が中心である。
abstractThis study develops a UAV-based thermal infrared inversion framework for high-resolution canopy temperature retrieval and irrigation decision support in tea plantations.
This study investigates the automatic classification of crop phenological stages from low-altitude UAV RGB imagery. The dataset included 11,489 images of five crops: sunflower, rapeseed, soybean, wheat, and barley. The images were annotated using the Biologische Bundesanstalt, Bundessortenamt und Chemische Industrie (BBCH) scale, with labels corresponding to either single stages or stage ranges to reflect heterogeneous field conditions and transitional crop states. A pretrained ResNet18 model was adapted to the task using transfer learning. Training was conducted in two stages: first, the classification head was optimized while the backbone remained frozen; second, the entire network was fine-tuned. The model achieved strong internal test accuracy across all crops, with 100% test accuracy for rapeseed and barley, more than 99% for the remaining crops, and a mean accuracy of 99.73% under the studied survey conditions. The results also compare favorably with previously reported studies on UAV-based phenological classification. Overall, the findings support the potential of low-altitude UAV imagery and deep learning for localized phenological assessment of selected field zones in precision agriculture, while broader deployment requires validation across independent fields, seasons, regions, and survey conditions.
Why it matches plant phenotyping methodsUAV画像と深層学習により作物の生育・フェノロジー段階を自動推定する方法が研究の中心であり、植物状態の抽出性能も評価している。
abstractThis study investigates the automatic classification of crop phenological stages from low-altitude UAV RGB imagery.
Identifying plant health conditions is an emerging precision-agriculture and food-security challenge, intensified by deploying deep-learning models on memory- and power-constrained edge devices. We present a TinyMLOps pipeline spanning model design, optimization, quantization, and deployment across diverse edge devices, evaluated under controlled laboratory conditions. Using a dataset derived from the PlantVillage benchmark, 39 fine-grained classes are aggregated into three superclasses: healthy leaf, unhealthy leaf, and no leaves. The resulting system therefore performs plant health-status classification and background filtering rather than diagnosing specific diseases. We train a MobileNet-based convolutional neural network jointly optimized for classification accuracy and computational efficiency, adopting state-of-the-art hyperparameter optimization (HPO) tools. Five models are selected, four from the Pareto Front and one as the biggest evaluated model during HPO, converted to LiteRT and ONNX, and evaluated at float32 and post-training int8 precision on a Raspberry Pi Zero 2 W and an STM32H743ZI microcontroller. At float32, LiteRT is 1.87–2.65× faster than ONNX Runtime on the Raspberry Pi across all five models. Relative to their float32 LiteRT counterparts, the int8 LiteRT models are 2.83–3.67× smaller on disk and 21.3–31.2% faster on the same board, at a cost in F1-score of between 0.0010 and 0.0068. On the microcontroller, only the two smallest models deploy at both precisions; for these, the fully quantized int8 variants are 4.3× faster and 3.85× smaller in MCU flash footprint than the float32 counterparts. The mid-range model fits the 2 MB flash and 1 MB RAM budget only when quantized, while the two largest models exceed it in every configuration tested.
Why it matches plant phenotyping methods葉画像から植物の健康状態を推定する分類手法と、エッジデバイス向けの最適化・量子化・展開パイプラインが研究の中心であり、植物状態の画像ベースフェノタイピングに該当する。
abstractWe present a TinyMLOps pipeline spanning model design, optimization, quantization, and deployment across diverse edge devices, evaluated under controlled laboratory conditions.
Reproduction assets foundThe paper's plant-phenotyping measurements are based on a derived PlantVillage dataset (39 classes aggregated into three superclasses) that the authors explicitly state is openly available in their own GitHub repository, also catalogued in the AgrifoodTEF Data Space. No author analysis code or trained model checkpointsDataset · publicThe data used in this study are derived from the openly available GitHub repository available at https://github.com/FBK-OpenIoT/PlantVillage-AugNoLeaves , accessed on 1 July 2026.Open asset ↗FBK-OpenIoT/PlantVillage-AugNoLeaveslines:1355-1403Dataset · publicPlantVillage-AugNoLeaves—AgrifoodTEF Data Space Catalogue. 2025. [(accessed on 1 July 2026)]. Available online: https://dataspace.agrifoodtef.eu/asset/did:op:3091fdcf83a05784416e585e4e45ea24afaf8c925a891921a3949acd98426f65Open asset ↗did:op:3091fdcf83a05784416e585e4e45ea24afaf8c925a891921a3949acd98426f65lines:1424-1474Plant phenotyping relevance match · UnverifiedOpenAlex · checked 8 Sept 2026
Cereal crops, including wheat and barley, are essential for global food security, but their productivity is strongly affected by nitrogen availability and water limitation. This study investigated the phenotypic responses of two commercially significant spring wheat cultivars, Videodur (DU) and Sensas (SW), and two spring barley cultivars, Tiroler Imperial (SG1) and Amidala (SG2), exposed to two nitrogen regimes, low nitrogen at 25 kg N/ha (N25) and high nitrogen at 130 kg N/ha (N130), under drought and well-watered conditions. Plants were monitored from the late vegetative stage through maturity under controlled multivariable climatic conditions similar to field settings. A high-throughput phenotyping workflow was applied, combining precision watering, RGB imaging, infrared thermography, and VNIR–SWIR hyperspectral imaging to quantify plant growth, projected digital biomass, plant temperature, water use efficiency, and spectral vegetation indices associated with pigment dynamics, water status, maturation, and senescence. The results revealed cultivar-specific responses to combined nitrogen and drought stress. Under drought conditions, the high nitrogen treatment (N130) increased plant temperature (Tplant) for barley (cv. SG1) and wheat (cv. SW) compared to N25, thereby accelerating early maturation. However, the decline in chlorophyll was not uniformly faster across all cultivars tested. The DU cultivar exhibited superior chlorophyll absorption and reflectance, indicating better drought adaptation compared to other tested species. The high nitrogen treatment (N130) reduced water use efficiency (WUE) in the SW and SG2 cultivars compared to N25, implying that these cultivars used more water. Enhanced nitrogen did not consistently improve water use efficiency but did accelerate the growth cycle. SG2 was particularly sensitive to drought, showing declines in vegetation indices, except for the Water Content Index, highlighting the need for precise water and nitrogen management. Overall, the integration of hyperspectral, thermal, RGB, and water use measurements enabled the identification of trait signatures linked to drought adaptation, nitrogen response, maturation, and senescence. These findings provide practical insights for optimizing nitrogen and irrigation management and for supporting breeding strategies aimed at improving cereal crop resilience under climate-change-associated stress conditions.
Why it matches plant phenotyping methodsRGB画像、赤外線サーモグラフィー、VNIR–SWIRハイパースペクトルを統合した高スループット表現型解析ワークフローが中心的に記述され、複数の植物形質・状態を定量化している。
abstractA high-throughput phenotyping workflow was applied, combining precision watering, RGB imaging, infrared thermography, and VNIR–SWIR hyperspectral imaging to quantify plant growth, projected digital biomass, plant temperature, water use efficiency, and spectral vegetation indices associated with pigment dynamics, water status, maturation, and senescence.